1 files changed, 72 insertions, 0 deletions

diff --git a/drivers/pinctrl/pinctrl-at91.h b/drivers/pinctrl/pinctrl-at91.h
new file mode 100644
index 000000000000..79b957f1dfa2
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-at91.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Parallel I/O Controller (PIO) - System peripherals registers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PINCTRL_AT91_H
+#define __PINCTRL_AT91_H
+
+#define PIO_PER         0x00    /* Enable Register */
+#define PIO_PDR         0x04    /* Disable Register */
+#define PIO_PSR         0x08    /* Status Register */
+#define PIO_OER         0x10    /* Output Enable Register */
+#define PIO_ODR         0x14    /* Output Disable Register */
+#define PIO_OSR         0x18    /* Output Status Register */
+#define PIO_IFER        0x20    /* Glitch Input Filter Enable */
+#define PIO_IFDR        0x24    /* Glitch Input Filter Disable */
+#define PIO_IFSR        0x28    /* Glitch Input Filter Status */
+#define PIO_SODR        0x30    /* Set Output Data Register */
+#define PIO_CODR        0x34    /* Clear Output Data Register */
+#define PIO_ODSR        0x38    /* Output Data Status Register */
+#define PIO_PDSR        0x3c    /* Pin Data Status Register */
+#define PIO_IER         0x40    /* Interrupt Enable Register */
+#define PIO_IDR         0x44    /* Interrupt Disable Register */
+#define PIO_IMR         0x48    /* Interrupt Mask Register */
+#define PIO_ISR         0x4c    /* Interrupt Status Register */
+#define PIO_MDER        0x50    /* Multi-driver Enable Register */
+#define PIO_MDDR        0x54    /* Multi-driver Disable Register */
+#define PIO_MDSR        0x58    /* Multi-driver Status Register */
+#define PIO_PUDR        0x60    /* Pull-up Disable Register */
+#define PIO_PUER        0x64    /* Pull-up Enable Register */
+#define PIO_PUSR        0x68    /* Pull-up Status Register */
+#define PIO_ASR         0x70    /* Peripheral A Select Register */
+#define PIO_ABCDSR1     0x70    /* Peripheral ABCD Select Register 1 [some sam9 only] */
+#define PIO_BSR         0x74    /* Peripheral B Select Register */
+#define PIO_ABCDSR2     0x74    /* Peripheral ABCD Select Register 2 [some sam9 only] */
+#define PIO_ABSR        0x78    /* AB Status Register */
+#define PIO_IFSCDR      0x80    /* Input Filter Slow Clock Disable Register */
+#define PIO_IFSCER      0x84    /* Input Filter Slow Clock Enable Register */
+#define PIO_IFSCSR      0x88    /* Input Filter Slow Clock Status Register */
+#define PIO_SCDR        0x8c    /* Slow Clock Divider Debouncing Register */
+#define         PIO_SCDR_DIV    (0x3fff <<  0)          /* Slow Clock Divider Mask */
+#define PIO_PPDDR       0x90    /* Pad Pull-down Disable Register */
+#define PIO_PPDER       0x94    /* Pad Pull-down Enable Register */
+#define PIO_PPDSR       0x98    /* Pad Pull-down Status Register */
+#define PIO_OWER        0xa0    /* Output Write Enable Register */
+#define PIO_OWDR        0xa4    /* Output Write Disable Register */
+#define PIO_OWSR        0xa8    /* Output Write Status Register */
+#define PIO_AIMER       0xb0    /* Additional Interrupt Modes Enable Register */
+#define PIO_AIMDR       0xb4    /* Additional Interrupt Modes Disable Register */
+#define PIO_AIMMR       0xb8    /* Additional Interrupt Modes Mask Register */
+#define PIO_ESR         0xc0    /* Edge Select Register */
+#define PIO_LSR         0xc4    /* Level Select Register */
+#define PIO_ELSR        0xc8    /* Edge/Level Status Register */
+#define PIO_FELLSR      0xd0    /* Falling Edge/Low Level Select Register */
+#define PIO_REHLSR      0xd4    /* Rising Edge/ High Level Select Register */
+#define PIO_FRLHSR      0xd8    /* Fall/Rise - Low/High Status Register */
+#define PIO_SCHMITT     0x100   /* Schmitt Trigger Register */
+
+#define SAMA5D3_PIO_DRIVER1             0x118  /*PIO Driver 1 register offset*/
+#define SAMA5D3_PIO_DRIVER2             0x11C  /*PIO Driver 2 register offset*/
+
+#define AT91SAM9X5_PIO_DRIVER1  0x114  /*PIO Driver 1 register offset*/
+#define AT91SAM9X5_PIO_DRIVER2  0x118  /*PIO Driver 2 register offset*/
+
+#endif