1 files changed, 47 insertions, 39 deletions

diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 0ab1fb65cdc3..3ecd7c99d8eb 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -38,11 +38,7 @@ static int pwr_irqs_off;
 module_param(pwr_irqs_off, bool, 0644);
 MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!");
 
-#if 0
-#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
-#else
-#define debug(x,args...)
-#endif
+#define debug(x, s, args...) dev_dbg(&s->dev->dev, x, ##args)
 
 /* Don't ask.. */
 #define to_cycles(ns)   ((ns)/120)
@@ -69,13 +65,13 @@ MODULE_PARM_DESC (override_bios, "yenta ignore bios resource allocation");
 static inline u32 cb_readl(struct yenta_socket *socket, unsigned reg)
 {
         u32 val = readl(socket->base + reg);
-        debug("%p %04x %08x\n", socket, reg, val);
+        debug("%04x %08x\n", socket, reg, val);
         return val;
 }
 
 static inline void cb_writel(struct yenta_socket *socket, unsigned reg, u32 val)
 {
-        debug("%p %04x %08x\n", socket, reg, val);
+        debug("%04x %08x\n", socket, reg, val);
         writel(val, socket->base + reg);
         readl(socket->base + reg); /* avoid problems with PCI write posting */
 }
@@ -84,7 +80,7 @@ static inline u8 config_readb(struct yenta_socket *socket, unsigned offset)
 {
         u8 val;
         pci_read_config_byte(socket->dev, offset, &val);
-        debug("%p %04x %02x\n", socket, offset, val);
+        debug("%04x %02x\n", socket, offset, val);
         return val;
 }
 
@@ -92,7 +88,7 @@ static inline u16 config_readw(struct yenta_socket *socket, unsigned offset)
 {
         u16 val;
         pci_read_config_word(socket->dev, offset, &val);
-        debug("%p %04x %04x\n", socket, offset, val);
+        debug("%04x %04x\n", socket, offset, val);
         return val;
 }
 
@@ -100,32 +96,32 @@ static inline u32 config_readl(struct yenta_socket *socket, unsigned offset)
 {
         u32 val;
         pci_read_config_dword(socket->dev, offset, &val);
-        debug("%p %04x %08x\n", socket, offset, val);
+        debug("%04x %08x\n", socket, offset, val);
         return val;
 }
 
 static inline void config_writeb(struct yenta_socket *socket, unsigned offset, u8 val)
 {
-        debug("%p %04x %02x\n", socket, offset, val);
+        debug("%04x %02x\n", socket, offset, val);
         pci_write_config_byte(socket->dev, offset, val);
 }
 
 static inline void config_writew(struct yenta_socket *socket, unsigned offset, u16 val)
 {
-        debug("%p %04x %04x\n", socket, offset, val);
+        debug("%04x %04x\n", socket, offset, val);
         pci_write_config_word(socket->dev, offset, val);
 }
 
 static inline void config_writel(struct yenta_socket *socket, unsigned offset, u32 val)
 {
-        debug("%p %04x %08x\n", socket, offset, val);
+        debug("%04x %08x\n", socket, offset, val);
         pci_write_config_dword(socket->dev, offset, val);
 }
 
 static inline u8 exca_readb(struct yenta_socket *socket, unsigned reg)
 {
         u8 val = readb(socket->base + 0x800 + reg);
-        debug("%p %04x %02x\n", socket, reg, val);
+        debug("%04x %02x\n", socket, reg, val);
         return val;
 }
 
@@ -134,20 +130,20 @@ static inline u8 exca_readw(struct yenta_socket *socket, unsigned reg)
         u16 val;
         val = readb(socket->base + 0x800 + reg);
         val |= readb(socket->base + 0x800 + reg + 1) << 8;
-        debug("%p %04x %04x\n", socket, reg, val);
+        debug("%04x %04x\n", socket, reg, val);
         return val;
 }
 
 static inline void exca_writeb(struct yenta_socket *socket, unsigned reg, u8 val)
 {
-        debug("%p %04x %02x\n", socket, reg, val);
+        debug("%04x %02x\n", socket, reg, val);
         writeb(val, socket->base + 0x800 + reg);
         readb(socket->base + 0x800 + reg); /* PCI write posting... */
 }
 
 static void exca_writew(struct yenta_socket *socket, unsigned reg, u16 val)
 {
-        debug("%p %04x %04x\n", socket, reg, val);
+        debug("%04x %04x\n", socket, reg, val);
         writeb(val, socket->base + 0x800 + reg);
         writeb(val >> 8, socket->base + 0x800 + reg + 1);
 
@@ -207,7 +203,7 @@ static int yenta_get_status(struct pcmcia_socket *sock, unsigned int *value)
 
 
         if (state & CB_CBCARD) {
-                val |= SS_CARDBUS;      
+                val |= SS_CARDBUS;
                 val |= (state & CB_CARDSTS) ? SS_STSCHG : 0;
                 val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? 0 : SS_DETECT;
                 val |= (state & CB_PWRCYCLE) ? SS_POWERON | SS_READY : 0;
@@ -650,8 +646,10 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
                 root = pci_find_parent_resource(socket->dev, res);
                 if (root && (request_resource(root, res) == 0))
                         return 0;
-                printk(KERN_INFO "yenta %s: Preassigned resource %d busy or not available, reconfiguring...\n",
-                                pci_name(socket->dev), nr);
+                dev_printk(KERN_INFO, &socket->dev->dev,
+                           "Preassigned resource %d busy or not available, "
+                           "reconfiguring...\n",
+                           nr);
         }
 
         if (type & IORESOURCE_IO) {
@@ -674,8 +672,9 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
                         return 1;
         }
 
-        printk(KERN_INFO "yenta %s: no resource of type %x available, trying to continue...\n",
-               pci_name(socket->dev), type);
+        dev_printk(KERN_INFO, &socket->dev->dev,
+                   "no resource of type %x available, trying to continue...\n",
+                   type);
         res->start = res->end = res->flags = 0;
         return 0;
 }
@@ -923,7 +922,8 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket)
         socket->probe_status = 0;
 
         if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) {
-                printk(KERN_WARNING "Yenta: request_irq() in yenta_probe_cb_irq() failed!\n");
+                dev_printk(KERN_WARNING, &socket->dev->dev,
+                           "request_irq() in yenta_probe_cb_irq() failed!\n");
                 return -1;
         }
 
@@ -960,8 +960,9 @@ static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_i
         else
                 socket->socket.irq_mask = 0;
 
-        printk(KERN_INFO "Yenta: ISA IRQ mask 0x%04x, PCI irq %d\n",
-               socket->socket.irq_mask, socket->cb_irq);
+        dev_printk(KERN_INFO, &socket->dev->dev,
+                   "ISA IRQ mask 0x%04x, PCI irq %d\n",
+                   socket->socket.irq_mask, socket->cb_irq);
 }
 
 /*
@@ -1051,8 +1052,9 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
 
         /* Show that the wanted subordinate number is not possible: */
         if (cardbus_bridge->subordinate > upper_limit)
-                printk(KERN_WARNING "Yenta: Upper limit for fixing this "
-                        "bridge's parent bridge: #%02x\n", upper_limit);
+                dev_printk(KERN_WARNING, &cardbus_bridge->dev,
+                           "Upper limit for fixing this "
+                           "bridge's parent bridge: #%02x\n", upper_limit);
 
         /* If we have room to increase the bridge's subordinate number, */
         if (bridge_to_fix->subordinate < upper_limit) {
@@ -1061,10 +1063,11 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
                 unsigned char subordinate_to_assign =
                         min(cardbus_bridge->subordinate, upper_limit);
 
-                printk(KERN_INFO "Yenta: Raising subordinate bus# of parent "
-                        "bus (#%02x) from #%02x to #%02x\n",
-                        bridge_to_fix->number,
-                        bridge_to_fix->subordinate, subordinate_to_assign);
+                dev_printk(KERN_INFO, &bridge_to_fix->dev,
+                           "Raising subordinate bus# of parent "
+                           "bus (#%02x) from #%02x to #%02x\n",
+                           bridge_to_fix->number,
+                           bridge_to_fix->subordinate, subordinate_to_assign);
 
                 /* Save the new subordinate in the bus struct of the bridge */
                 bridge_to_fix->subordinate = subordinate_to_assign;
@@ -1091,8 +1094,8 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
          * Bail out if so.
          */
         if (!dev->subordinate) {
-                printk(KERN_ERR "Yenta: no bus associated with %s! "
-                        "(try 'pci=assign-busses')\n", pci_name(dev));
+                dev_printk(KERN_ERR, &dev->dev, "no bus associated! "
+                           "(try 'pci=assign-busses')\n");
                 return -ENODEV;
         }
 
@@ -1127,7 +1130,7 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
                 goto disable;
 
         if (!pci_resource_start(dev, 0)) {
-                printk(KERN_ERR "No cardbus resource!\n");
+                dev_printk(KERN_ERR, &dev->dev, "No cardbus resource!\n");
                 ret = -ENODEV;
                 goto release;
         }
@@ -1146,8 +1149,8 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
          * report the subsystem vendor and device for help debugging
          * the irq stuff...
          */
-        printk(KERN_INFO "Yenta: CardBus bridge found at %s [%04x:%04x]\n",
-                pci_name(dev), dev->subsystem_vendor, dev->subsystem_device);
+        dev_printk(KERN_INFO, &dev->dev, "CardBus bridge found [%04x:%04x]\n",
+                   dev->subsystem_vendor, dev->subsystem_device);
 
         yenta_config_init(socket);
 
@@ -1179,8 +1182,12 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
                 socket->poll_timer.data = (unsigned long)socket;
                 socket->poll_timer.expires = jiffies + HZ;
                 add_timer(&socket->poll_timer);
-                printk(KERN_INFO "Yenta: no PCI IRQ, CardBus support disabled for this socket.\n"
-                       KERN_INFO "Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.\n");
+                dev_printk(KERN_INFO, &dev->dev,
+                           "no PCI IRQ, CardBus support disabled for this "
+                           "socket.\n");
+                dev_printk(KERN_INFO, &dev->dev,
+                           "check your BIOS CardBus, BIOS IRQ or ACPI "
+                           "settings.\n");
         } else {
                 socket->socket.features |= SS_CAP_CARDBUS;
         }
@@ -1188,7 +1195,8 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
         /* Figure out what the dang thing can do for the PCMCIA layer... */
         yenta_interrogate(socket);
         yenta_get_socket_capabilities(socket, isa_interrupts);
-        printk(KERN_INFO "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+        dev_printk(KERN_INFO, &dev->dev,
+                   "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
 
         yenta_fixup_parent_bridge(dev->subordinate);