1 files changed, 203 insertions, 0 deletions

diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
new file mode 100644
index 000000000000..6375ebc85020
--- /dev/null
+++ b/drivers/pcmcia/Kconfig
@@ -0,0 +1,203 @@
+#
+# PCMCIA bus subsystem configuration
+#
+# Right now the non-CardBus choices are not supported
+# by the integrated kernel driver.
+#
+
+menu "PCCARD (PCMCIA/CardBus) support"
+
+config PCCARD
+        tristate "PCCard (PCMCIA/CardBus) support"
+        select HOTPLUG
+        ---help---
+          Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+          computer.  These are credit-card size devices such as network cards,
+          modems or hard drives often used with laptops computers.  There are
+          actually two varieties of these cards: the older 16 bit PCMCIA cards
+          and the newer 32 bit CardBus cards.
+
+          To compile this driver as modules, choose M here: the
+          module will be called pcmcia_core.
+
+if PCCARD
+
+config PCMCIA_DEBUG
+        bool "Enable PCCARD debugging"
+        help
+          Say Y here to enable PCMCIA subsystem debugging.  You
+          will need to choose the debugging level either via the
+          kernel command line, or module options depending whether
+          you build the PCMCIA as modules.
+
+          The kernel command line options are:
+            pcmcia_core.pc_debug=N
+            ds.pc_debug=N
+            sa11xx_core.pc_debug=N
+
+          The module option is called pc_debug=N
+
+          In all the above examples, N is the debugging verbosity
+          level.
+
+config PCMCIA
+        tristate "16-bit PCMCIA support"
+        default y
+        ---help---
+           This option enables support for 16-bit PCMCIA cards. Most older
+           PC-cards are such 16-bit PCMCIA cards, so unless you know you're
+           only using 32-bit CardBus cards, say Y or M here.
+
+           To use 16-bit PCMCIA cards, you will need supporting software from 
+           David Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+           for location).  Please also read the PCMCIA-HOWTO, available from
+           <http://www.tldp.org/docs.html#howto>.
+
+           To compile this driver as modules, choose M here: the
+           module will be called pcmcia.
+
+           If unsure, say Y.
+
+config CARDBUS
+        bool "32-bit CardBus support"   
+        depends on PCI
+        default y
+        ---help---
+          CardBus is a bus mastering architecture for PC-cards, which allows
+          for 32 bit PC-cards (the original PCMCIA standard specifies only
+          a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
+
+          To use 32 bit PC-cards, you also need a CardBus compatible host
+          bridge. Virtually all modern PCMCIA bridges do this, and most of
+          them are "yenta-compatible", so say Y or M there, too.
+
+          If unsure, say Y.
+
+comment "PC-card bridges"
+
+config YENTA
+        tristate "CardBus yenta-compatible bridge support"
+        depends on PCI
+#fixme: remove dependendcy on CARDBUS
+        depends on CARDBUS
+        select PCCARD_NONSTATIC
+        ---help---
+          This option enables support for CardBus host bridges.  Virtually
+          all modern PCMCIA bridges are CardBus compatible.  A "bridge" is 
+          the hardware inside your computer that PCMCIA cards are plugged 
+          into.
+
+          To compile this driver as modules, choose M here: the
+          module will be called yenta_socket.
+
+          If unsure, say Y.
+
+config PD6729
+        tristate "Cirrus PD6729 compatible bridge support"
+        depends on PCMCIA && PCI
+        select PCCARD_NONSTATIC
+        help
+          This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
+          device, found in some older laptops and PCMCIA card readers.
+
+config I82092
+        tristate "i82092 compatible bridge support"
+        depends on PCMCIA && PCI
+        select PCCARD_NONSTATIC
+        help
+          This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
+          found in some older laptops and more commonly in evaluation boards for the
+          chip.
+
+config I82365
+        tristate "i82365 compatible bridge support"
+        depends on PCMCIA && ISA
+        select PCCARD_NONSTATIC
+        help
+          Say Y here to include support for ISA-bus PCMCIA host bridges that
+          are register compatible with the Intel i82365.  These are found on
+          older laptops and ISA-bus card readers for desktop systems.  A
+          "bridge" is the hardware inside your computer that PCMCIA cards are
+          plugged into. If unsure, say N.
+
+config TCIC
+        tristate "Databook TCIC host bridge support"
+        depends on PCMCIA
+        select PCCARD_NONSTATIC
+        help
+          Say Y here to include support for the Databook TCIC family of PCMCIA
+          host bridges. These are only found on a handful of old systems.
+          "Bridge" is the name used for the hardware inside your computer that
+          PCMCIA cards are plugged into. If unsure, say N.
+
+config HD64465_PCMCIA
+        tristate "HD64465 host bridge support"
+        depends on HD64465 && PCMCIA
+
+config PCMCIA_AU1X00
+        tristate "Au1x00 pcmcia support"
+        depends on SOC_AU1X00 && PCMCIA
+
+config PCMCIA_SA1100
+        tristate "SA1100 support"
+        depends on ARM && ARCH_SA1100 && PCMCIA
+        help
+          Say Y here to include support for SA11x0-based PCMCIA or CF
+          sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
+          Xscale(R) embedded machines.
+
+          This driver is also available as a module called sa1100_cs.
+
+config PCMCIA_SA1111
+        tristate "SA1111 support"
+        depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
+        help
+          Say Y  here to include support for SA1111-based PCMCIA or CF
+          sockets, found on the Jornada 720, Graphicsmaster and other
+          StrongARM(R)/Xscale(R) embedded machines.
+
+          This driver is also available as a module called sa1111_cs.
+
+config PCMCIA_PXA2XX
+        tristate "PXA2xx support"
+        depends on ARM && ARCH_PXA && PCMCIA
+        help
+          Say Y here to include support for the PXA2xx PCMCIA controller
+
+config PCMCIA_PROBE
+        bool
+        default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X
+
+config M32R_PCC
+        bool "M32R PCMCIA I/F"
+        depends on M32R && CHIP_M32700 && PCMCIA
+        help
+          Say Y here to use the M32R PCMCIA controller.
+
+config M32R_CFC
+        bool "M32R CF I/F Controller"
+        depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_OPSPUT)
+        help
+          Say Y here to use the M32R CompactFlash controller.
+
+config M32R_CFC_NUM
+        int "M32R CF I/F number"
+        depends on M32R_CFC
+        default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_OPSPUT
+        help
+          Set the number of M32R CF slots.
+
+config PCMCIA_VRC4171
+        tristate "NEC VRC4171 Card Controllers support"
+        depends on VRC4171 && PCMCIA
+
+config PCMCIA_VRC4173
+        tristate "NEC VRC4173 CARDU support"
+        depends on CPU_VR41XX && PCI && PCMCIA
+
+config PCCARD_NONSTATIC
+        tristate
+
+endif   # PCCARD
+
+endmenu