1 files changed, 0 insertions, 73 deletions

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index e8a7f1b1b2bc..204b1c8e972b 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -714,33 +714,6 @@ static void __devinit quirk_vt82c598_id(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,     PCI_DEVICE_ID_VIA_82C597_0,     quirk_vt82c598_id );
 
-#ifdef CONFIG_ACPI_SLEEP
-
-/*
- * Some VIA systems boot with the abnormal status flag set. This can cause
- * the BIOS to re-POST the system on resume rather than passing control
- * back to the OS.  Clear the flag on boot
- */
-static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev)
-{
-        u32 reg;
-
-        acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS,
-                                &reg);
-
-        if (reg & 0x800) {
-                printk("Clearing abnormal poweroff flag\n");
-                acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
-                                        ACPI_REGISTER_PM1_STATUS,
-                                        (u16)0x800);
-        }
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff);
-
-#endif
-
 /*
  * CardBus controllers have a legacy base address that enables them
  * to respond as i82365 pcmcia controllers.  We don't want them to
@@ -1619,52 +1592,6 @@ static void __devinit fixup_rev1_53c810(struct pci_dev* dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
 
-/*
- * Fixup to mark boot BIOS video selected by BIOS before it changes
- *
- * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
- *
- * The standard boot ROM sequence for an x86 machine uses the BIOS
- * to select an initial video card for boot display. This boot video
- * card will have it's BIOS copied to C0000 in system RAM.
- * IORESOURCE_ROM_SHADOW is used to associate the boot video
- * card with this copy. On laptops this copy has to be used since
- * the main ROM may be compressed or combined with another image.
- * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
- * is marked here since the boot video device will be the only enabled
- * video device at this point.
- */
-
-static void __devinit fixup_video(struct pci_dev *pdev)
-{
-        struct pci_dev *bridge;
-        struct pci_bus *bus;
-        u16 config;
-
-        if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
-                return;
-
-        /* Is VGA routed to us? */
-        bus = pdev->bus;
-        while (bus) {
-                bridge = bus->self;
-                if (bridge) {
-                        pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
-                                                &config);
-                        if (!(config & PCI_BRIDGE_CTL_VGA))
-                                return;
-                }
-                bus = bus->parent;
-        }
-        pci_read_config_word(pdev, PCI_COMMAND, &config);
-        if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
-                pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
-                printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
-        }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_video);
-
-
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
 {
         while (f < end) {