1 files changed, 109 insertions, 58 deletions

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index cf3e7c0ded3f..30c41fc1c996 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -36,7 +36,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRID
 
 /* Deal with broken BIOS'es that neglect to enable passive release,
    which can cause problems in combination with the 82441FX/PPro MTRRs */
-static void __devinit quirk_passive_release(struct pci_dev *dev)
+static void quirk_passive_release(struct pci_dev *dev)
 {
         struct pci_dev *d = NULL;
         unsigned char dlc;
@@ -53,6 +53,7 @@ static void __devinit quirk_passive_release(struct pci_dev *dev)
         }
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    PCI_DEVICE_ID_INTEL_82441,      quirk_passive_release );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_82441,      quirk_passive_release );
 
 /*  The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround
     but VIA don't answer queries. If you happen to have good contacts at VIA
@@ -134,7 +135,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 	PCI_DEVICE_ID_INTEL_82439TX, 	quir
  *      Updated based on further information from the site and also on
  *      information provided by VIA 
  */
-static void __devinit quirk_vialatency(struct pci_dev *dev)
+static void quirk_vialatency(struct pci_dev *dev)
 {
         struct pci_dev *p;
         u8 rev;
@@ -185,6 +186,10 @@ exit:
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA,      PCI_DEVICE_ID_VIA_8363_0,       quirk_vialatency );
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA,      PCI_DEVICE_ID_VIA_8371_1,       quirk_vialatency );
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA,      PCI_DEVICE_ID_VIA_8361,         quirk_vialatency );
+/* Must restore this on a resume from RAM */
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA,     PCI_DEVICE_ID_VIA_8363_0,       quirk_vialatency );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA,     PCI_DEVICE_ID_VIA_8371_1,       quirk_vialatency );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA,     PCI_DEVICE_ID_VIA_8361,         quirk_vialatency );
 
 /*
  *      VIA Apollo VP3 needs ETBF on BT848/878
@@ -532,7 +537,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8235,	quirk_vt8235
  * TODO: When we have device-specific interrupt routers,
  * this code will go away from quirks.
  */
-static void __devinit quirk_via_ioapic(struct pci_dev *dev)
+static void quirk_via_ioapic(struct pci_dev *dev)
 {
         u8 tmp;
         
@@ -548,6 +553,7 @@ static void __devinit quirk_via_ioapic(struct pci_dev *dev)
         pci_write_config_byte (dev, 0x58, tmp);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA,      PCI_DEVICE_ID_VIA_82C686,       quirk_via_ioapic );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA,     PCI_DEVICE_ID_VIA_82C686,       quirk_via_ioapic );
 
 /*
  * VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit.
@@ -555,7 +561,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686,	quirk_via_i
  * Set this bit to get rid of cycle wastage.
  * Otherwise uncritical.
  */
-static void __devinit quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
+static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
 {
         u8 misc_control2;
 #define BYPASS_APIC_DEASSERT 8
@@ -567,6 +573,7 @@ static void __devinit quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
         }
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA,      PCI_DEVICE_ID_VIA_8237,         quirk_via_vt8237_bypass_apic_deassert);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA,     PCI_DEVICE_ID_VIA_8237,         quirk_via_vt8237_bypass_apic_deassert);
 
 /*
  * The AMD io apic can hang the box when an apic irq is masked.
@@ -600,7 +607,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI,	PCI_ANY_ID,			quirk_ioapic_rmw );
 #define AMD8131_revB0        0x11
 #define AMD8131_MISC         0x40
 #define AMD8131_NIOAMODE_BIT 0
-static void __init quirk_amd_8131_ioapic(struct pci_dev *dev) 
+static void quirk_amd_8131_ioapic(struct pci_dev *dev)
 { 
         unsigned char revid, tmp;
         
@@ -616,6 +623,7 @@ static void __init quirk_amd_8131_ioapic(struct pci_dev *dev)
         }
 } 
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
 #endif /* CONFIG_X86_IO_APIC */
 
 
@@ -641,65 +649,84 @@ static void __devinit quirk_via_acpi(struct pci_dev *d)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,     PCI_DEVICE_ID_VIA_82C586_3,     quirk_via_acpi );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,     PCI_DEVICE_ID_VIA_82C686_4,     quirk_via_acpi );
 
-/*
- * Via 686A/B:  The PCI_INTERRUPT_LINE register for the on-chip
- * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
- * when written, it makes an internal connection to the PIC.
- * For these devices, this register is defined to be 4 bits wide.
- * Normally this is fine.  However for IO-APIC motherboards, or
- * non-x86 architectures (yes Via exists on PPC among other places),
- * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
- * interrupts delivered properly.
- *
- * Some of the on-chip devices are actually '586 devices' so they are
- * listed here.
- */
-
-static int via_irq_fixup_needed = -1;
 
 /*
- * As some VIA hardware is available in PCI-card form, we need to restrict
- * this quirk to VIA PCI hardware built onto VIA-based motherboards only.
- * We try to locate a VIA southbridge before deciding whether the quirk
- * should be applied.
+ *      VIA bridges which have VLink
  */
-static const struct pci_device_id via_irq_fixup_tbl[] = {
-        {
-                .vendor         = PCI_VENDOR_ID_VIA,
-                .device         = PCI_ANY_ID,
-                .subvendor      = PCI_ANY_ID,
-                .subdevice      = PCI_ANY_ID,
-                .class          = PCI_CLASS_BRIDGE_ISA << 8,
-                .class_mask     = 0xffff00,
-        },
+
+static const struct pci_device_id via_vlink_fixup_tbl[] = {
+        /* Internal devices need IRQ line routing, pre VLink */
+        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C686), 0 },
+        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8231), 17 },
+        /* Devices with VLink */
+        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233_0), 17},
+        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233A), 17 },
+        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233C_0), 17 },
+        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8235), 16 },
+        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237), 15 },
+        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237A), 15 },
         { 0, },
 };
 
-static void quirk_via_irq(struct pci_dev *dev)
+/**
+ *      quirk_via_vlink         -       VIA VLink IRQ number update
+ *      @dev: PCI device
+ *
+ *      If the device we are dealing with is on a PIC IRQ we need to
+ *      ensure that the IRQ line register which usually is not relevant
+ *      for PCI cards, is actually written so that interrupts get sent
+ *      to the right place
+ */
+
+static void quirk_via_vlink(struct pci_dev *dev)
 {
+        const struct pci_device_id *via_vlink_fixup;
+        static int dev_lo = -1, dev_hi = 18;
         u8 irq, new_irq;
 
-        if (via_irq_fixup_needed == -1)
-                via_irq_fixup_needed = pci_dev_present(via_irq_fixup_tbl);
+        /* Check if we have VLink and cache the result */
 
-        if (!via_irq_fixup_needed)
+        /* Checked already - no */
+        if (dev_lo == -2)
                 return;
 
+        /* Not checked - see what bridge we have and find the device
+           ranges */
+
+        if (dev_lo == -1) {
+                via_vlink_fixup = pci_find_present(via_vlink_fixup_tbl);
+                if (via_vlink_fixup == NULL) {
+                        dev_lo = -2;
+                        return;
+                }
+                dev_lo = via_vlink_fixup->driver_data;
+                /* 82C686 is special - 0/0 */
+                if (dev_lo == 0)
+                        dev_hi = 0;
+        }
         new_irq = dev->irq;
 
         /* Don't quirk interrupts outside the legacy IRQ range */
         if (!new_irq || new_irq > 15)
                 return;
 
+        /* Internal device ? */
+        if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > dev_hi ||
+                PCI_SLOT(dev->devfn) < dev_lo)
+                return;
+
+        /* This is an internal VLink device on a PIC interrupt. The BIOS
+           ought to have set this but may not have, so we redo it */
+
         pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
         if (new_irq != irq) {
-                printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n",
+                printk(KERN_INFO "PCI: VIA VLink IRQ fixup for %s, from %d to %d\n",
                         pci_name(dev), irq, new_irq);
                 udelay(15);     /* unknown if delay really needed */
                 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
         }
 }
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink);
 
 /*
  * VIA VT82C598 has its device ID settable and many BIOSes
@@ -720,13 +747,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C597_0,	quirk_vt
  * do this even if the Linux CardBus driver is not loaded, because
  * the Linux i82365 driver does not (and should not) handle CardBus.
  */
-static void __devinit quirk_cardbus_legacy(struct pci_dev *dev)
+static void quirk_cardbus_legacy(struct pci_dev *dev)
 {
         if ((PCI_CLASS_BRIDGE_CARDBUS << 8) ^ dev->class)
                 return;
         pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
+DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
 
 /*
  * Following the PCI ordering rules is optional on the AMD762. I'm not
@@ -735,7 +763,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
  * To be fair to AMD, it follows the spec by default, its BIOS people
  * who turn it off!
  */
-static void __devinit quirk_amd_ordering(struct pci_dev *dev)
+static void quirk_amd_ordering(struct pci_dev *dev)
 {
         u32 pcic;
         pci_read_config_dword(dev, 0x4C, &pcic);
@@ -749,6 +777,7 @@ static void __devinit quirk_amd_ordering(struct pci_dev *dev)
         }
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD,      PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD,     PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering );
 
 /*
  *      DreamWorks provided workaround for Dunord I-3000 problem
@@ -784,7 +813,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA,	0x605,	quirk_transparent_bridge
  * datasheets found at http://www.national.com/ds/GX for info on what
  * these bits do.  <christer@weinigel.se>
  */
-static void __init quirk_mediagx_master(struct pci_dev *dev)
+static void quirk_mediagx_master(struct pci_dev *dev)
 {
         u8 reg;
         pci_read_config_byte(dev, 0x41, &reg);
@@ -795,13 +824,14 @@ static void __init quirk_mediagx_master(struct pci_dev *dev)
         }
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX,    PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX,   PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
 
 /*
  *      Ensure C0 rev restreaming is off. This is normally done by
  *      the BIOS but in the odd case it is not the results are corruption
  *      hence the presence of a Linux check
  */
-static void __init quirk_disable_pxb(struct pci_dev *pdev)
+static void quirk_disable_pxb(struct pci_dev *pdev)
 {
         u16 config;
         u8 rev;
@@ -817,6 +847,7 @@ static void __init quirk_disable_pxb(struct pci_dev *pdev)
         }
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    PCI_DEVICE_ID_INTEL_82454NX,    quirk_disable_pxb );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_82454NX,    quirk_disable_pxb );
 
 
 /*
@@ -874,7 +905,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82375,	quirk_e
  * runs everywhere at present we suppress the printk output in most
  * irrelevant cases.
  */
-static void __init k8t_sound_hostbridge(struct pci_dev *dev)
+static void k8t_sound_hostbridge(struct pci_dev *dev)
 {
         unsigned char val;
 
@@ -893,8 +924,8 @@ static void __init k8t_sound_hostbridge(struct pci_dev *dev)
         }
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
 
-#ifndef CONFIG_ACPI_SLEEP
 /*
  * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
  * is not activated. The myth is that Asus said that they do not want the
@@ -906,10 +937,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_ho
  * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it 
  * becomes necessary to do this tweak in two steps -- I've chosen the Host
  * bridge as trigger.
- *
- * Actually, leaving it unhidden and not redoing the quirk over suspend2ram
- * will cause thermal management to break down, and causing machine to
- * overheat.
  */
 static int __initdata asus_hides_smbus;
 
@@ -1019,7 +1046,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82855PM_HB,	as
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge );
 
-static void __init asus_hides_smbus_lpc(struct pci_dev *dev)
+static void asus_hides_smbus_lpc(struct pci_dev *dev)
 {
         u16 val;
         
@@ -1042,8 +1069,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801CA_0,	asu
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_82801EB_0,  asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_82801DB_0,  asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_82801BA_0,  asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_82801CA_0,  asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_82801EB_0,  asus_hides_smbus_lpc );
 
-static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
+static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
 {
         u32 val, rcba;
         void __iomem *base;
@@ -1059,13 +1092,12 @@ static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
         printk(KERN_INFO "PCI: Enabled ICH6/i801 SMBus device\n");
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_ICH6_1,     asus_hides_smbus_lpc_ich6 );
-
-#endif
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_ICH6_1,     asus_hides_smbus_lpc_ich6 );
 
 /*
  * SiS 96x south bridge: BIOS typically hides SMBus device...
  */
-static void __init quirk_sis_96x_smbus(struct pci_dev *dev)
+static void quirk_sis_96x_smbus(struct pci_dev *dev)
 {
         u8 val = 0;
         printk(KERN_INFO "Enabling SiS 96x SMBus.\n");
@@ -1086,7 +1118,7 @@ static int __devinitdata sis_96x_compatible = 0;
 
 #define SIS_DETECT_REGISTER 0x40
 
-static void __init quirk_sis_503(struct pci_dev *dev)
+static void quirk_sis_503(struct pci_dev *dev)
 {
         u8 reg;
         u16 devid;
@@ -1122,13 +1154,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_651,		quirk_sis_96x_
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,      PCI_DEVICE_ID_SI_735,           quirk_sis_96x_compatible );
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,      PCI_DEVICE_ID_SI_503,           quirk_sis_503 );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI,      PCI_DEVICE_ID_SI_503,           quirk_sis_503 );
 /*
  * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller
  * and MC97 modem controller are disabled when a second PCI soundcard is
  * present. This patch, tweaking the VT8237 ISA bridge, enables them.
  * -- bjd
  */
-static void __init asus_hides_ac97_lpc(struct pci_dev *dev)
+static void asus_hides_ac97_lpc(struct pci_dev *dev)
 {
         u8 val;
         int asus_hides_ac97 = 0;
@@ -1159,6 +1192,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_962,		quirk_sis_96x_
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,      PCI_DEVICE_ID_SI_963,           quirk_sis_96x_smbus );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,      PCI_DEVICE_ID_SI_LPC,           quirk_sis_96x_smbus );
 
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA,     PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc );
+
+
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI,      PCI_DEVICE_ID_SI_961,           quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI,      PCI_DEVICE_ID_SI_962,           quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI,      PCI_DEVICE_ID_SI_963,           quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI,      PCI_DEVICE_ID_SI_LPC,           quirk_sis_96x_smbus );
+
 #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
 
 /*
@@ -1167,7 +1208,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_LPC,		quirk_sis_96x_
  *      the PCI scanning.
  */
 
-static void __devinit quirk_jmicron_dualfn(struct pci_dev *pdev)
+static void quirk_jmicron_dualfn(struct pci_dev *pdev)
 {
         u32 conf;
         u8 hdr;
@@ -1205,6 +1246,7 @@ static void __devinit quirk_jmicron_dualfn(struct pci_dev *pdev)
 }
 
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
 
 #endif
 
@@ -1532,6 +1574,8 @@ extern struct pci_fixup __start_pci_fixups_final[];
 extern struct pci_fixup __end_pci_fixups_final[];
 extern struct pci_fixup __start_pci_fixups_enable[];
 extern struct pci_fixup __end_pci_fixups_enable[];
+extern struct pci_fixup __start_pci_fixups_resume[];
+extern struct pci_fixup __end_pci_fixups_resume[];
 
 
 void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
@@ -1559,6 +1603,11 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
                 end = __end_pci_fixups_enable;
                 break;
 
+        case pci_fixup_resume:
+                start = __start_pci_fixups_resume;
+                end = __end_pci_fixups_resume;
+                break;
+
         default:
                 /* stupid compiler warning, you would think with an enum... */
                 return;
@@ -1596,7 +1645,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	0x1460,		quirk_p64h2_1k_io);
  * Force it to be linked by setting the corresponding control bit in the
  * config space.
  */
-static void __devinit quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
+static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
 {
         uint8_t b;
         if (pci_read_config_byte(dev, 0xf41, &b) == 0) {
@@ -1610,6 +1659,8 @@ static void __devinit quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA,  PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
                         quirk_nvidia_ck804_pcie_aer_ext_cap);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA,  PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
+                        quirk_nvidia_ck804_pcie_aer_ext_cap);
 
 #ifdef CONFIG_PCI_MSI
 /* To disable MSI globally */