1 files changed, 40 insertions, 365 deletions

diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index c55103f3cebd..b6fde3565e55 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -54,19 +54,16 @@ u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id)
         struct slot *p_slot;
         u8 rc = 0;
         u8 getstatus;
-        struct pci_func *func;
         struct event_info *taskInfo;
 
         /* Attention Button Change */
         dbg("shpchp:  Attention button interrupt received.\n");
         
-        func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
-
         /* This is the structure that tells the worker thread what to do */
         taskInfo = &(ctrl->event_queue[ctrl->next_event]);
         p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
-        p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+        p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
         p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
         
         ctrl->next_event = (ctrl->next_event + 1) % 10;
@@ -111,14 +108,11 @@ u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
         struct slot *p_slot;
         u8 rc = 0;
         u8 getstatus;
-        struct pci_func *func;
         struct event_info *taskInfo;
 
         /* Switch Change */
         dbg("shpchp:  Switch interrupt received.\n");
 
-        func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
-
         /* This is the structure that tells the worker thread
          * what to do
          */
@@ -128,19 +122,18 @@ u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
 
         rc++;
         p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-        p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+        p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
         p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
         dbg("%s: Card present %x Power status %x\n", __FUNCTION__,
-                func->presence_save, func->pwr_save);
+                p_slot->presence_save, p_slot->pwr_save);
 
         if (getstatus) {
                 /*
                  * Switch opened
                  */
                 info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot);
-                func->switch_save = 0;
                 taskInfo->event_type = INT_SWITCH_OPEN;
-                if (func->pwr_save && func->presence_save) {
+                if (p_slot->pwr_save && p_slot->presence_save) {
                         taskInfo->event_type = INT_POWER_FAULT;
                         err("Surprise Removal of card\n");
                 }
@@ -149,7 +142,6 @@ u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
                  *  Switch closed
                  */
                 info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot);
-                func->switch_save = 0x10;
                 taskInfo->event_type = INT_SWITCH_CLOSE;
         }
 
@@ -165,14 +157,11 @@ u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id)
         struct slot *p_slot;
         u8 rc = 0;
         /*u8 temp_byte;*/
-        struct pci_func *func;
         struct event_info *taskInfo;
 
         /* Presence Change */
         dbg("shpchp:  Presence/Notify input change.\n");
 
-        func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
-
         /* This is the structure that tells the worker thread
          * what to do
          */
@@ -186,8 +175,8 @@ u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id)
         /* 
          * Save the presence state
          */
-        p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
-        if (func->presence_save) {
+        p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
+        if (p_slot->presence_save) {
                 /*
                  * Card Present
                  */
@@ -212,14 +201,11 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id)
         struct controller *ctrl = (struct controller *) inst_id;
         struct slot *p_slot;
         u8 rc = 0;
-        struct pci_func *func;
         struct event_info *taskInfo;
 
         /* Power fault */
         dbg("shpchp:  Power fault interrupt received.\n");
 
-        func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
-
         /* This is the structure that tells the worker thread
          * what to do
          */
@@ -235,7 +221,7 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id)
                  * Power fault Cleared
                  */
                 info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot);
-                func->status = 0x00;
+                p_slot->status = 0x00;
                 taskInfo->event_type = INT_POWER_FAULT_CLEAR;
         } else {
                 /*
@@ -244,7 +230,7 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id)
                 info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot);
                 taskInfo->event_type = INT_POWER_FAULT;
                 /* set power fault status for this board */
-                func->status = 0xFF;
+                p_slot->status = 0xFF;
                 info("power fault bit %x set\n", hp_slot);
         }
         if (rc)
@@ -253,179 +239,6 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id)
         return rc;
 }
 
-/**
- * shpchp_slot_create - Creates a node and adds it to the proper bus.
- * @busnumber - bus where new node is to be located
- *
- * Returns pointer to the new node or NULL if unsuccessful
- */
-struct pci_func *shpchp_slot_create(u8 busnumber)
-{
-        struct pci_func *new_slot;
-        struct pci_func *next;
-
-        new_slot = kmalloc(sizeof(*new_slot), GFP_KERNEL);
-
-        if (new_slot == NULL) {
-                return(new_slot);
-        }
-
-        memset(new_slot, 0, sizeof(struct pci_func));
-
-        new_slot->next = NULL;
-        new_slot->configured = 1;
-
-        if (shpchp_slot_list[busnumber] == NULL) {
-                shpchp_slot_list[busnumber] = new_slot;
-        } else {
-                next = shpchp_slot_list[busnumber];
-                while (next->next != NULL)
-                        next = next->next;
-                next->next = new_slot;
-        }
-        return(new_slot);
-}
-
-
-/*
- * slot_remove - Removes a node from the linked list of slots.
- * @old_slot: slot to remove
- *
- * Returns 0 if successful, !0 otherwise.
- */
-static int slot_remove(struct pci_func * old_slot)
-{
-        struct pci_func *next;
-
-        if (old_slot == NULL)
-                return(1);
-
-        next = shpchp_slot_list[old_slot->bus];
-
-        if (next == NULL) {
-                return(1);
-        }
-
-        if (next == old_slot) {
-                shpchp_slot_list[old_slot->bus] = old_slot->next;
-                kfree(old_slot);
-                return(0);
-        }
-
-        while ((next->next != old_slot) && (next->next != NULL)) {
-                next = next->next;
-        }
-
-        if (next->next == old_slot) {
-                next->next = old_slot->next;
-                kfree(old_slot);
-                return(0);
-        } else
-                return(2);
-}
-
-
-/**
- * bridge_slot_remove - Removes a node from the linked list of slots.
- * @bridge: bridge to remove
- * @secondaryBus: secondary PCI bus number for bridge being removed
- * @subordinateBus: subordinate PCI bus number for bridge being removed
- *
- * Returns 0 if successful, !0 otherwise.
- */
-static int bridge_slot_remove(struct pci_func *bridge, u8 secondaryBus,
-                u8 subordinateBus)
-{
-        u8 tempBus;
-        struct pci_func *next;
-
-        if (bridge == NULL)
-                return(1);
-
-        for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) {
-                next = shpchp_slot_list[tempBus];
-
-                while (!slot_remove(next)) {
-                        next = shpchp_slot_list[tempBus];
-                }
-        }
-
-        next = shpchp_slot_list[bridge->bus];
-
-        if (next == NULL) {
-                return(1);
-        }
-
-        if (next == bridge) {
-                shpchp_slot_list[bridge->bus] = bridge->next;
-                kfree(bridge);
-                return(0);
-        }
-
-        while ((next->next != bridge) && (next->next != NULL)) {
-                next = next->next;
-        }
-
-        if (next->next == bridge) {
-                next->next = bridge->next;
-                kfree(bridge);
-                return(0);
-        } else
-                return(2);
-}
-
-
-/**
- * shpchp_slot_find - Looks for a node by bus, and device, multiple functions accessed
- * @bus: bus to find
- * @device: device to find
- * @index: is 0 for first function found, 1 for the second...
- *
- * Returns pointer to the node if successful, %NULL otherwise.
- */
-struct pci_func *shpchp_slot_find(u8 bus, u8 device, u8 index)
-{
-        int found = -1;
-        struct pci_func *func;
-
-        func = shpchp_slot_list[bus];
-
-        if ((func == NULL) || ((func->device == device) && (index == 0)))
-                return(func);
-
-        if (func->device == device)
-                found++;
-
-        while (func->next != NULL) {
-                func = func->next;
-
-                if (func->device == device)
-                        found++;
-
-                if (found == index)
-                        return(func);
-        }
-
-        return(NULL);
-}
-
-static int is_bridge(struct pci_func *func, struct controller *ctrl)
-{
-        u8 hdr_type;
-        struct pci_bus *bus = ctrl->pci_dev->subordinate;
-
-        /*
-         * Note: device may have just been hot-added and not yet scanned
-         * by the pci core, so its pci_dev structure may not exist yet
-         */
-        pci_bus_read_config_byte(bus, PCI_DEVFN(func->device, func->function),
-                        PCI_HEADER_TYPE, &hdr_type);
-        if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_BRIDGE)
-                return 1;
-        else
-                return 0;
-}
-
 /* The following routines constitute the bulk of the 
    hotplug controller logic
  */
@@ -495,19 +308,20 @@ enum pci_bus_speed asp, enum pci_bus_speed bsp, enum pci_bus_speed msp)
  * Configures board
  *
  */
-static u32 board_added(struct pci_func * func, struct controller * ctrl)
+static u32 board_added(struct slot *p_slot)
 {
         u8 hp_slot;
         u8 slots_not_empty = 0;
         u32 rc = 0;
-        struct slot *p_slot;
         enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed;
         u8 pi, mode;
+        struct controller *ctrl = p_slot->ctrl;
 
-        p_slot = shpchp_find_slot(ctrl, func->device);
-        hp_slot = func->device - ctrl->slot_device_offset;
+        hp_slot = p_slot->device - ctrl->slot_device_offset;
 
-        dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n", __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot);
+        dbg("%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n",
+                        __FUNCTION__, p_slot->device,
+                        ctrl->slot_device_offset, hp_slot);
 
         /* Wait for exclusive access to hardware */
         down(&ctrl->crit_sect);
@@ -699,13 +513,13 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl)
         wait_for_ctrl_irq (ctrl);
         dbg("%s: after long_delay\n", __FUNCTION__);
 
-        dbg("%s: func status = %x\n", __FUNCTION__, func->status);
+        dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status);
         /* Check for a power fault */
-        if (func->status == 0xFF) {
+        if (p_slot->status == 0xFF) {
                 /* power fault occurred, but it was benign */
                 dbg("%s: power fault\n", __FUNCTION__);
                 rc = POWER_FAILURE;
-                func->status = 0;
+                p_slot->status = 0;
                 goto err_exit;
         }
 
@@ -715,10 +529,9 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl)
                 goto err_exit;
         }
 
-        func->status = 0;
-        func->switch_save = 0x10;
-        func->is_a_board = 0x01;
-        func->pwr_save = 1;
+        p_slot->status = 0;
+        p_slot->is_a_board = 0x01;
+        p_slot->pwr_save = 1;
 
         /* Wait for exclusive access to hardware */
         down(&ctrl->crit_sect);
@@ -767,38 +580,23 @@ err_exit:
  * remove_board - Turns off slot and LED's
  *
  */
-static u32 remove_board(struct pci_func *func, struct controller *ctrl)
+static u32 remove_board(struct slot *p_slot)
 {
-        u8 device;
+        struct controller *ctrl = p_slot->ctrl;
         u8 hp_slot;
         u32 rc;
-        struct slot *p_slot;
-        u8 secondary = 0, subordinate = 0;
-        int remove_bridge;
-
-        if (func == NULL)
-                return(1);
-
-        if ((remove_bridge = is_bridge(func, ctrl))) {
-                /* Stash away bus information before we destroy it */
-                secondary = func->pci_dev->subordinate->secondary;
-                subordinate = func->pci_dev->subordinate->subordinate;
-        }
 
-        if (shpchp_unconfigure_device(func))
+        if (shpchp_unconfigure_device(p_slot))
                 return(1);
 
-        device = func->device;
-
-        hp_slot = func->device - ctrl->slot_device_offset;
+        hp_slot = p_slot->device - ctrl->slot_device_offset;
         p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
         dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
 
         /* Change status to shutdown */
-        if (func->is_a_board)
-                func->status = 0x01;
-        func->configured = 0;
+        if (p_slot->is_a_board)
+                p_slot->status = 0x01;
 
         /* Wait for exclusive access to hardware */
         down(&ctrl->crit_sect);
@@ -835,36 +633,8 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl)
         /* Done with exclusive hardware access */
         up(&ctrl->crit_sect);
 
-        if (ctrl->add_support) {
-                while (func) {
-                        if (remove_bridge) {
-                                dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, 
-                                        func->device, func->function);
-                                bridge_slot_remove(func, secondary,
-                                                subordinate);
-                        } else
-                                dbg("PCI Function Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, 
-                                        func->device, func->function);
-                                slot_remove(func);
-
-                        func = shpchp_slot_find(ctrl->slot_bus, device, 0);
-                }
-
-                /* Setup slot structure with entry for empty slot */
-                func = shpchp_slot_create(ctrl->slot_bus);
-
-                if (func == NULL) {
-                        return(1);
-                }
-
-                func->bus = ctrl->slot_bus;
-                func->device = device;
-                func->function = 0;
-                func->configured = 0;
-                func->switch_save = 0x10;
-                func->pwr_save = 0;
-                func->is_a_board = 0;
-        }
+        p_slot->pwr_save = 0;
+        p_slot->is_a_board = 0;
 
         return 0;
 }
@@ -1006,7 +776,6 @@ static void interrupt_event_handler(struct controller *ctrl)
 {
         int loop = 0;
         int change = 1;
-        struct pci_func *func;
         u8 hp_slot;
         u8 getstatus;
         struct slot *p_slot;
@@ -1021,11 +790,10 @@ static void interrupt_event_handler(struct controller *ctrl)
                                         ctrl->event_queue[loop].event_type);
                                 hp_slot = ctrl->event_queue[loop].hp_slot;
 
-                                func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
-
                                 p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
-                                dbg("%s: hp_slot %d, func %p, p_slot %p\n", __FUNCTION__, hp_slot, func, p_slot);
+                                dbg("%s: hp_slot %d, p_slot %p\n",
+                                                __FUNCTION__, hp_slot, p_slot);
 
                                 if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) {
                                         dbg("%s: button cancel\n", __FUNCTION__);
@@ -1147,13 +915,6 @@ int shpchp_enable_slot (struct slot *p_slot)
 {
         u8 getstatus = 0;
         int rc;
-        struct pci_func *func;
-
-        func = shpchp_slot_find(p_slot->bus, p_slot->device, 0);
-        if (!func) {
-                dbg("%s: Error! slot NULL\n", __FUNCTION__);
-                return -ENODEV;
-        }
 
         /* Check to see if (latch closed, card present, power off) */
         down(&p_slot->ctrl->crit_sect);
@@ -1177,75 +938,35 @@ int shpchp_enable_slot (struct slot *p_slot)
         }
         up(&p_slot->ctrl->crit_sect);
 
-        slot_remove(func);
-
-        func = shpchp_slot_create(p_slot->bus);
-        if (func == NULL)
-                return -ENOMEM;
-
-        func->bus = p_slot->bus;
-        func->device = p_slot->device;
-        func->function = 0;
-        func->configured = 0;
-        func->is_a_board = 1;
+        p_slot->is_a_board = 1;
 
         /* We have to save the presence info for these slots */
-        p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
-        p_slot->hpc_ops->get_power_status(p_slot, &(func->pwr_save));
-        dbg("%s: func->pwr_save %x\n", __FUNCTION__, func->pwr_save);
+        p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
+        p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save));
+        dbg("%s: p_slot->pwr_save %x\n", __FUNCTION__, p_slot->pwr_save);
         p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
-        func->switch_save = !getstatus? 0x10:0;
 
-        rc = board_added(func, p_slot->ctrl);
+        rc = board_added(p_slot);
         if (rc) {
-                if (is_bridge(func, p_slot->ctrl)) {
-                        u8 secondary = func->pci_dev->subordinate->secondary;
-                        u8 subordinate =
-                                func->pci_dev->subordinate->subordinate;
-                        bridge_slot_remove(func, secondary, subordinate);
-                } else
-                        slot_remove(func);
-
-                /* Setup slot structure with entry for empty slot */
-                func = shpchp_slot_create(p_slot->bus);
-                if (func == NULL)
-                        return -ENOMEM; /* Out of memory */
-
-                func->bus = p_slot->bus;
-                func->device = p_slot->device;
-                func->function = 0;
-                func->configured = 0;
-                func->is_a_board = 1;
-
-                /* We have to save the presence info for these slots */
-                p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+                p_slot->hpc_ops->get_adapter_status(p_slot,
+                                &(p_slot->presence_save));
                 p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
-                func->switch_save = !getstatus? 0x10:0;
         }
 
-        if (p_slot)
-                update_slot_info(p_slot);
-
+        update_slot_info(p_slot);
         return rc;
 }
 
 
 int shpchp_disable_slot (struct slot *p_slot)
 {
-        u8 class_code, header_type, BCR;
-        u8 index = 0;
         u8 getstatus = 0;
         u32 rc = 0;
         int ret = 0;
-        unsigned int devfn;
-        struct pci_bus *pci_bus;
-        struct pci_func *func;
 
         if (!p_slot->ctrl)
                 return -ENODEV;
 
-        pci_bus = p_slot->ctrl->pci_dev->subordinate;
-
         /* Check to see if (latch closed, card present, power on) */
         down(&p_slot->ctrl->crit_sect);
 
@@ -1269,54 +990,8 @@ int shpchp_disable_slot (struct slot *p_slot)
         }
         up(&p_slot->ctrl->crit_sect);
 
-        func = shpchp_slot_find(p_slot->bus, p_slot->device, index++);
-
-        /* Make sure there are no video controllers here
-         * for all func of p_slot
-         */
-        while (func && !rc) {
-                pci_bus->number = func->bus;
-                devfn = PCI_DEVFN(func->device, func->function);
-
-                /* Check the Class Code */
-                rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
-                if (rc)
-                        return -ENODEV;
-
-                if (class_code == PCI_BASE_CLASS_DISPLAY) {
-                        /* Display/Video adapter (not supported) */
-                        rc = REMOVE_NOT_SUPPORTED;
-                } else {
-                        /* See if it's a bridge */
-                        rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
-                        if (rc)
-                                return -ENODEV;
-
-                        /* If it's a bridge, check the VGA Enable bit */
-                        if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
-                                rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR);
-                                if (rc)
-                                        return -ENODEV;
-
-                                /* If the VGA Enable bit is set, remove isn't supported */
-                                if (BCR & PCI_BRIDGE_CTL_VGA) {
-                                        rc = REMOVE_NOT_SUPPORTED;
-                                }
-                        }
-                }
-
-                func = shpchp_slot_find(p_slot->bus, p_slot->device, index++);
-        }
-
-        func = shpchp_slot_find(p_slot->bus, p_slot->device, 0);
-        if ((func != NULL) && !rc) {
-                rc = remove_board(func, p_slot->ctrl);
-        } else if (!rc)
-                rc = -ENODEV;
-
-        if (p_slot)
-                update_slot_info(p_slot);
-
+        rc = remove_board(p_slot);
+        update_slot_info(p_slot);
         return rc;
 }