aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/wireless/Kconfig1
-rw-r--r--drivers/net/wireless/Makefile1
-rw-r--r--drivers/net/wireless/rt2x00/Kconfig130
-rw-r--r--drivers/net/wireless/rt2x00/Makefile22
-rw-r--r--drivers/net/wireless/rt2x00/rt2400pci.c1689
-rw-r--r--drivers/net/wireless/rt2x00/rt2400pci.h943
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.c2000
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.h1236
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c1837
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.h798
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00.h807
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00config.c165
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00debug.c331
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00debug.h57
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00dev.c1133
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00firmware.c124
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00lib.h125
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00mac.c459
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00pci.c481
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00pci.h127
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00reg.h283
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00rfkill.c148
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00ring.h255
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00usb.c595
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00usb.h180
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.c2603
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.h1457
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.c2124
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.h1024
29 files changed, 21135 insertions, 0 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 085ba132835f..f481c757e22b 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -583,5 +583,6 @@ source "drivers/net/wireless/bcm43xx/Kconfig"
583source "drivers/net/wireless/b43/Kconfig" 583source "drivers/net/wireless/b43/Kconfig"
584source "drivers/net/wireless/b43legacy/Kconfig" 584source "drivers/net/wireless/b43legacy/Kconfig"
585source "drivers/net/wireless/zd1211rw/Kconfig" 585source "drivers/net/wireless/zd1211rw/Kconfig"
586source "drivers/net/wireless/rt2x00/Kconfig"
586 587
587endmenu 588endmenu
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 351024f2fe72..a7a15e3509e8 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -53,3 +53,4 @@ obj-$(CONFIG_RTL8187) += rtl8187.o
53obj-$(CONFIG_ADM8211) += adm8211.o 53obj-$(CONFIG_ADM8211) += adm8211.o
54 54
55obj-$(CONFIG_IWLWIFI) += iwlwifi/ 55obj-$(CONFIG_IWLWIFI) += iwlwifi/
56obj-$(CONFIG_RT2X00) += rt2x00/
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
new file mode 100644
index 000000000000..da05b1faf60d
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -0,0 +1,130 @@
1config RT2X00
2 tristate "Ralink driver support"
3 depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
4 ---help---
5 This will enable the experimental support for the Ralink drivers,
6 developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
7
8 These drivers will make use of the Devicescape ieee80211 stack.
9
10 When building one of the individual drivers, the rt2x00 library
11 will also be created. That library (when the driver is built as
12 a module) will be called "rt2x00lib.ko".
13
14config RT2X00_LIB
15 tristate
16 depends on RT2X00
17
18config RT2X00_LIB_PCI
19 tristate
20 depends on RT2X00
21 select RT2X00_LIB
22
23config RT2X00_LIB_USB
24 tristate
25 depends on RT2X00
26 select RT2X00_LIB
27
28config RT2X00_LIB_FIRMWARE
29 boolean
30 depends on RT2X00_LIB
31 select CRC_ITU_T
32 select FW_LOADER
33
34config RT2X00_LIB_RFKILL
35 boolean
36 depends on RT2X00_LIB
37 select RFKILL
38 select INPUT_POLLDEV
39
40config RT2400PCI
41 tristate "Ralink rt2400 pci/pcmcia support"
42 depends on RT2X00 && PCI
43 select RT2X00_LIB_PCI
44 select EEPROM_93CX6
45 ---help---
46 This is an experimental driver for the Ralink rt2400 wireless chip.
47
48 When compiled as a module, this driver will be called "rt2400pci.ko".
49
50config RT2400PCI_RFKILL
51 bool "RT2400 rfkill support"
52 depends on RT2400PCI
53 select RT2X00_LIB_RFKILL
54 ---help---
55 This adds support for integrated rt2400 devices that feature a
56 hardware button to control the radio state.
57 This feature depends on the RF switch subsystem rfkill.
58
59config RT2500PCI
60 tristate "Ralink rt2500 pci/pcmcia support"
61 depends on RT2X00 && PCI
62 select RT2X00_LIB_PCI
63 select EEPROM_93CX6
64 ---help---
65 This is an experimental driver for the Ralink rt2500 wireless chip.
66
67 When compiled as a module, this driver will be called "rt2500pci.ko".
68
69config RT2500PCI_RFKILL
70 bool "RT2500 rfkill support"
71 depends on RT2500PCI
72 select RT2X00_LIB_RFKILL
73 ---help---
74 This adds support for integrated rt2500 devices that feature a
75 hardware button to control the radio state.
76 This feature depends on the RF switch subsystem rfkill.
77
78config RT61PCI
79 tristate "Ralink rt61 pci/pcmcia support"
80 depends on RT2X00 && PCI
81 select RT2X00_LIB_PCI
82 select RT2X00_LIB_FIRMWARE
83 select EEPROM_93CX6
84 ---help---
85 This is an experimental driver for the Ralink rt61 wireless chip.
86
87 When compiled as a module, this driver will be called "rt61pci.ko".
88
89config RT61PCI_RFKILL
90 bool "RT61 rfkill support"
91 depends on RT61PCI
92 select RT2X00_LIB_RFKILL
93 ---help---
94 This adds support for integrated rt61 devices that feature a
95 hardware button to control the radio state.
96 This feature depends on the RF switch subsystem rfkill.
97
98config RT2500USB
99 tristate "Ralink rt2500 usb support"
100 depends on RT2X00 && USB
101 select RT2X00_LIB_USB
102 ---help---
103 This is an experimental driver for the Ralink rt2500 wireless chip.
104
105 When compiled as a module, this driver will be called "rt2500usb.ko".
106
107config RT73USB
108 tristate "Ralink rt73 usb support"
109 depends on RT2X00 && USB
110 select RT2X00_LIB_USB
111 select RT2X00_LIB_FIRMWARE
112 ---help---
113 This is an experimental driver for the Ralink rt73 wireless chip.
114
115 When compiled as a module, this driver will be called "rt73usb.ko".
116
117config RT2X00_LIB_DEBUGFS
118 bool "Ralink debugfs support"
119 depends on RT2X00_LIB && MAC80211_DEBUGFS
120 ---help---
121 Enable creation of debugfs files for the rt2x00 drivers.
122 These debugfs files support both reading and writing of the
123 most important register types of the rt2x00 devices.
124
125config RT2X00_DEBUG
126 bool "Ralink debug output"
127 depends on RT2X00_LIB
128 ---help---
129 Enable debugging output for all rt2x00 modules
130
diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile
new file mode 100644
index 000000000000..30d654a42eea
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -0,0 +1,22 @@
1rt2x00lib-objs := rt2x00dev.o rt2x00mac.o rt2x00config.o
2
3ifeq ($(CONFIG_RT2X00_LIB_DEBUGFS),y)
4 rt2x00lib-objs += rt2x00debug.o
5endif
6
7ifeq ($(CONFIG_RT2X00_LIB_RFKILL),y)
8 rt2x00lib-objs += rt2x00rfkill.o
9endif
10
11ifeq ($(CONFIG_RT2X00_LIB_FIRMWARE),y)
12 rt2x00lib-objs += rt2x00firmware.o
13endif
14
15obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o
16obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o
17obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o
18obj-$(CONFIG_RT2400PCI) += rt2400pci.o
19obj-$(CONFIG_RT2500PCI) += rt2500pci.o
20obj-$(CONFIG_RT61PCI) += rt61pci.o
21obj-$(CONFIG_RT2500USB) += rt2500usb.o
22obj-$(CONFIG_RT73USB) += rt73usb.o
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
new file mode 100644
index 000000000000..38e2188937c5
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -0,0 +1,1689 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2400pci
23 Abstract: rt2400pci device specific routines.
24 Supported chipsets: RT2460.
25 */
26
27/*
28 * Set enviroment defines for rt2x00.h
29 */
30#define DRV_NAME "rt2400pci"
31
32#include <linux/delay.h>
33#include <linux/etherdevice.h>
34#include <linux/init.h>
35#include <linux/kernel.h>
36#include <linux/module.h>
37#include <linux/pci.h>
38#include <linux/eeprom_93cx6.h>
39
40#include "rt2x00.h"
41#include "rt2x00pci.h"
42#include "rt2400pci.h"
43
44/*
45 * Register access.
46 * All access to the CSR registers will go through the methods
47 * rt2x00pci_register_read and rt2x00pci_register_write.
48 * BBP and RF register require indirect register access,
49 * and use the CSR registers BBPCSR and RFCSR to achieve this.
50 * These indirect registers work with busy bits,
51 * and we will try maximal REGISTER_BUSY_COUNT times to access
52 * the register while taking a REGISTER_BUSY_DELAY us delay
53 * between each attampt. When the busy bit is still set at that time,
54 * the access attempt is considered to have failed,
55 * and we will print an error.
56 */
57static u32 rt2400pci_bbp_check(const struct rt2x00_dev *rt2x00dev)
58{
59 u32 reg;
60 unsigned int i;
61
62 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
63 rt2x00pci_register_read(rt2x00dev, BBPCSR, &reg);
64 if (!rt2x00_get_field32(reg, BBPCSR_BUSY))
65 break;
66 udelay(REGISTER_BUSY_DELAY);
67 }
68
69 return reg;
70}
71
72static void rt2400pci_bbp_write(const struct rt2x00_dev *rt2x00dev,
73 const unsigned int word, const u8 value)
74{
75 u32 reg;
76
77 /*
78 * Wait until the BBP becomes ready.
79 */
80 reg = rt2400pci_bbp_check(rt2x00dev);
81 if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
82 ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n");
83 return;
84 }
85
86 /*
87 * Write the data into the BBP.
88 */
89 reg = 0;
90 rt2x00_set_field32(&reg, BBPCSR_VALUE, value);
91 rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
92 rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
93 rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 1);
94
95 rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
96}
97
98static void rt2400pci_bbp_read(const struct rt2x00_dev *rt2x00dev,
99 const unsigned int word, u8 *value)
100{
101 u32 reg;
102
103 /*
104 * Wait until the BBP becomes ready.
105 */
106 reg = rt2400pci_bbp_check(rt2x00dev);
107 if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
108 ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
109 return;
110 }
111
112 /*
113 * Write the request into the BBP.
114 */
115 reg = 0;
116 rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
117 rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
118 rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 0);
119
120 rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
121
122 /*
123 * Wait until the BBP becomes ready.
124 */
125 reg = rt2400pci_bbp_check(rt2x00dev);
126 if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
127 ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
128 *value = 0xff;
129 return;
130 }
131
132 *value = rt2x00_get_field32(reg, BBPCSR_VALUE);
133}
134
135static void rt2400pci_rf_write(const struct rt2x00_dev *rt2x00dev,
136 const unsigned int word, const u32 value)
137{
138 u32 reg;
139 unsigned int i;
140
141 if (!word)
142 return;
143
144 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
145 rt2x00pci_register_read(rt2x00dev, RFCSR, &reg);
146 if (!rt2x00_get_field32(reg, RFCSR_BUSY))
147 goto rf_write;
148 udelay(REGISTER_BUSY_DELAY);
149 }
150
151 ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n");
152 return;
153
154rf_write:
155 reg = 0;
156 rt2x00_set_field32(&reg, RFCSR_VALUE, value);
157 rt2x00_set_field32(&reg, RFCSR_NUMBER_OF_BITS, 20);
158 rt2x00_set_field32(&reg, RFCSR_IF_SELECT, 0);
159 rt2x00_set_field32(&reg, RFCSR_BUSY, 1);
160
161 rt2x00pci_register_write(rt2x00dev, RFCSR, reg);
162 rt2x00_rf_write(rt2x00dev, word, value);
163}
164
165static void rt2400pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
166{
167 struct rt2x00_dev *rt2x00dev = eeprom->data;
168 u32 reg;
169
170 rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
171
172 eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN);
173 eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT);
174 eeprom->reg_data_clock =
175 !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK);
176 eeprom->reg_chip_select =
177 !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT);
178}
179
180static void rt2400pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
181{
182 struct rt2x00_dev *rt2x00dev = eeprom->data;
183 u32 reg = 0;
184
185 rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in);
186 rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out);
187 rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_CLOCK,
188 !!eeprom->reg_data_clock);
189 rt2x00_set_field32(&reg, CSR21_EEPROM_CHIP_SELECT,
190 !!eeprom->reg_chip_select);
191
192 rt2x00pci_register_write(rt2x00dev, CSR21, reg);
193}
194
195#ifdef CONFIG_RT2X00_LIB_DEBUGFS
196#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
197
198static void rt2400pci_read_csr(const struct rt2x00_dev *rt2x00dev,
199 const unsigned int word, u32 *data)
200{
201 rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data);
202}
203
204static void rt2400pci_write_csr(const struct rt2x00_dev *rt2x00dev,
205 const unsigned int word, u32 data)
206{
207 rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data);
208}
209
210static const struct rt2x00debug rt2400pci_rt2x00debug = {
211 .owner = THIS_MODULE,
212 .csr = {
213 .read = rt2400pci_read_csr,
214 .write = rt2400pci_write_csr,
215 .word_size = sizeof(u32),
216 .word_count = CSR_REG_SIZE / sizeof(u32),
217 },
218 .eeprom = {
219 .read = rt2x00_eeprom_read,
220 .write = rt2x00_eeprom_write,
221 .word_size = sizeof(u16),
222 .word_count = EEPROM_SIZE / sizeof(u16),
223 },
224 .bbp = {
225 .read = rt2400pci_bbp_read,
226 .write = rt2400pci_bbp_write,
227 .word_size = sizeof(u8),
228 .word_count = BBP_SIZE / sizeof(u8),
229 },
230 .rf = {
231 .read = rt2x00_rf_read,
232 .write = rt2400pci_rf_write,
233 .word_size = sizeof(u32),
234 .word_count = RF_SIZE / sizeof(u32),
235 },
236};
237#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
238
239#ifdef CONFIG_RT2400PCI_RFKILL
240static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
241{
242 u32 reg;
243
244 rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
245 return rt2x00_get_field32(reg, GPIOCSR_BIT0);
246}
247#endif /* CONFIG_RT2400PCI_RFKILL */
248
249/*
250 * Configuration handlers.
251 */
252static void rt2400pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr)
253{
254 __le32 reg[2];
255
256 memset(&reg, 0, sizeof(reg));
257 memcpy(&reg, addr, ETH_ALEN);
258
259 /*
260 * The MAC address is passed to us as an array of bytes,
261 * that array is little endian, so no need for byte ordering.
262 */
263 rt2x00pci_register_multiwrite(rt2x00dev, CSR3, &reg, sizeof(reg));
264}
265
266static void rt2400pci_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
267{
268 __le32 reg[2];
269
270 memset(&reg, 0, sizeof(reg));
271 memcpy(&reg, bssid, ETH_ALEN);
272
273 /*
274 * The BSSID is passed to us as an array of bytes,
275 * that array is little endian, so no need for byte ordering.
276 */
277 rt2x00pci_register_multiwrite(rt2x00dev, CSR5, &reg, sizeof(reg));
278}
279
280static void rt2400pci_config_packet_filter(struct rt2x00_dev *rt2x00dev,
281 const unsigned int filter)
282{
283 int promisc = !!(filter & IFF_PROMISC);
284 u32 reg;
285
286 rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
287 rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME, !promisc);
288 rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
289}
290
291static void rt2400pci_config_type(struct rt2x00_dev *rt2x00dev, int type)
292{
293 u32 reg;
294
295 rt2x00pci_register_write(rt2x00dev, CSR14, 0);
296
297 /*
298 * Apply hardware packet filter.
299 */
300 rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
301
302 if (!is_monitor_present(&rt2x00dev->interface) &&
303 (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
304 rt2x00_set_field32(&reg, RXCSR0_DROP_TODS, 1);
305 else
306 rt2x00_set_field32(&reg, RXCSR0_DROP_TODS, 0);
307
308 /*
309 * If there is a non-monitor interface present
310 * the packet should be strict (even if a monitor interface is present!).
311 * When there is only 1 interface present which is in monitor mode
312 * we should start accepting _all_ frames.
313 */
314 if (is_interface_present(&rt2x00dev->interface)) {
315 rt2x00_set_field32(&reg, RXCSR0_DROP_CRC, 1);
316 rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL, 1);
317 rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL, 1);
318 rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
319 } else if (is_monitor_present(&rt2x00dev->interface)) {
320 rt2x00_set_field32(&reg, RXCSR0_DROP_CRC, 0);
321 rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL, 0);
322 rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL, 0);
323 rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 0);
324 }
325
326 rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
327
328 /*
329 * Enable beacon config
330 */
331 rt2x00pci_register_read(rt2x00dev, BCNCSR1, &reg);
332 rt2x00_set_field32(&reg, BCNCSR1_PRELOAD,
333 PREAMBLE + get_duration(IEEE80211_HEADER, 2));
334 rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg);
335
336 /*
337 * Enable synchronisation.
338 */
339 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
340 if (is_interface_present(&rt2x00dev->interface)) {
341 rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
342 rt2x00_set_field32(&reg, CSR14_TBCN, 1);
343 }
344
345 rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
346 if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
347 rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 2);
348 else if (type == IEEE80211_IF_TYPE_STA)
349 rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 1);
350 else if (is_monitor_present(&rt2x00dev->interface) &&
351 !is_interface_present(&rt2x00dev->interface))
352 rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 0);
353
354 rt2x00pci_register_write(rt2x00dev, CSR14, reg);
355}
356
357static void rt2400pci_config_rate(struct rt2x00_dev *rt2x00dev, const int rate)
358{
359 struct ieee80211_conf *conf = &rt2x00dev->hw->conf;
360 u32 reg;
361 u32 preamble;
362 u16 value;
363
364 if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE))
365 preamble = SHORT_PREAMBLE;
366 else
367 preamble = PREAMBLE;
368
369 reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK;
370 rt2x00pci_register_write(rt2x00dev, ARCSR1, reg);
371
372 rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
373 value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ?
374 SHORT_DIFS : DIFS) +
375 PLCP + preamble + get_duration(ACK_SIZE, 10);
376 rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, value);
377 value = SIFS + PLCP + preamble + get_duration(ACK_SIZE, 10);
378 rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME, value);
379 rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
380
381 preamble = DEVICE_GET_RATE_FIELD(rate, PREAMBLE) ? 0x08 : 0x00;
382
383 rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
384 rt2x00_set_field32(&reg, ARCSR2_SIGNAL, 0x00 | preamble);
385 rt2x00_set_field32(&reg, ARCSR2_SERVICE, 0x04);
386 rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10));
387 rt2x00pci_register_write(rt2x00dev, ARCSR2, reg);
388
389 rt2x00pci_register_read(rt2x00dev, ARCSR3, &reg);
390 rt2x00_set_field32(&reg, ARCSR3_SIGNAL, 0x01 | preamble);
391 rt2x00_set_field32(&reg, ARCSR3_SERVICE, 0x04);
392 rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20));
393 rt2x00pci_register_write(rt2x00dev, ARCSR3, reg);
394
395 rt2x00pci_register_read(rt2x00dev, ARCSR4, &reg);
396 rt2x00_set_field32(&reg, ARCSR4_SIGNAL, 0x02 | preamble);
397 rt2x00_set_field32(&reg, ARCSR4_SERVICE, 0x04);
398 rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55));
399 rt2x00pci_register_write(rt2x00dev, ARCSR4, reg);
400
401 rt2x00pci_register_read(rt2x00dev, ARCSR5, &reg);
402 rt2x00_set_field32(&reg, ARCSR5_SIGNAL, 0x03 | preamble);
403 rt2x00_set_field32(&reg, ARCSR5_SERVICE, 0x84);
404 rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110));
405 rt2x00pci_register_write(rt2x00dev, ARCSR5, reg);
406}
407
408static void rt2400pci_config_phymode(struct rt2x00_dev *rt2x00dev,
409 const int phymode)
410{
411 struct ieee80211_hw_mode *mode;
412 struct ieee80211_rate *rate;
413
414 rt2x00dev->curr_hwmode = HWMODE_B;
415
416 mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
417 rate = &mode->rates[mode->num_rates - 1];
418
419 rt2400pci_config_rate(rt2x00dev, rate->val2);
420}
421
422static void rt2400pci_config_channel(struct rt2x00_dev *rt2x00dev,
423 const int index, const int channel)
424{
425 struct rf_channel reg;
426
427 /*
428 * Fill rf_reg structure.
429 */
430 memcpy(&reg, &rt2x00dev->spec.channels[index], sizeof(reg));
431
432 /*
433 * Switch on tuning bits.
434 */
435 rt2x00_set_field32(&reg.rf1, RF1_TUNER, 1);
436 rt2x00_set_field32(&reg.rf3, RF3_TUNER, 1);
437
438 rt2400pci_rf_write(rt2x00dev, 1, reg.rf1);
439 rt2400pci_rf_write(rt2x00dev, 2, reg.rf2);
440 rt2400pci_rf_write(rt2x00dev, 3, reg.rf3);
441
442 /*
443 * RF2420 chipset don't need any additional actions.
444 */
445 if (rt2x00_rf(&rt2x00dev->chip, RF2420))
446 return;
447
448 /*
449 * For the RT2421 chipsets we need to write an invalid
450 * reference clock rate to activate auto_tune.
451 * After that we set the value back to the correct channel.
452 */
453 rt2400pci_rf_write(rt2x00dev, 1, reg.rf1);
454 rt2400pci_rf_write(rt2x00dev, 2, 0x000c2a32);
455 rt2400pci_rf_write(rt2x00dev, 3, reg.rf3);
456
457 msleep(1);
458
459 rt2400pci_rf_write(rt2x00dev, 1, reg.rf1);
460 rt2400pci_rf_write(rt2x00dev, 2, reg.rf2);
461 rt2400pci_rf_write(rt2x00dev, 3, reg.rf3);
462
463 msleep(1);
464
465 /*
466 * Switch off tuning bits.
467 */
468 rt2x00_set_field32(&reg.rf1, RF1_TUNER, 0);
469 rt2x00_set_field32(&reg.rf3, RF3_TUNER, 0);
470
471 rt2400pci_rf_write(rt2x00dev, 1, reg.rf1);
472 rt2400pci_rf_write(rt2x00dev, 3, reg.rf3);
473
474 /*
475 * Clear false CRC during channel switch.
476 */
477 rt2x00pci_register_read(rt2x00dev, CNT0, &reg.rf1);
478}
479
480static void rt2400pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower)
481{
482 rt2400pci_bbp_write(rt2x00dev, 3, TXPOWER_TO_DEV(txpower));
483}
484
485static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev,
486 int antenna_tx, int antenna_rx)
487{
488 u8 r1;
489 u8 r4;
490
491 rt2400pci_bbp_read(rt2x00dev, 4, &r4);
492 rt2400pci_bbp_read(rt2x00dev, 1, &r1);
493
494 /*
495 * Configure the TX antenna.
496 */
497 switch (antenna_tx) {
498 case ANTENNA_SW_DIVERSITY:
499 case ANTENNA_HW_DIVERSITY:
500 rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 1);
501 break;
502 case ANTENNA_A:
503 rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 0);
504 break;
505 case ANTENNA_B:
506 rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 2);
507 break;
508 }
509
510 /*
511 * Configure the RX antenna.
512 */
513 switch (antenna_rx) {
514 case ANTENNA_SW_DIVERSITY:
515 case ANTENNA_HW_DIVERSITY:
516 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
517 break;
518 case ANTENNA_A:
519 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 0);
520 break;
521 case ANTENNA_B:
522 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
523 break;
524 }
525
526 rt2400pci_bbp_write(rt2x00dev, 4, r4);
527 rt2400pci_bbp_write(rt2x00dev, 1, r1);
528}
529
530static void rt2400pci_config_duration(struct rt2x00_dev *rt2x00dev,
531 int short_slot_time, int beacon_int)
532{
533 u32 reg;
534
535 rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
536 rt2x00_set_field32(&reg, CSR11_SLOT_TIME,
537 short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME);
538 rt2x00pci_register_write(rt2x00dev, CSR11, reg);
539
540 rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
541 rt2x00_set_field32(&reg, CSR18_SIFS, SIFS);
542 rt2x00_set_field32(&reg, CSR18_PIFS,
543 short_slot_time ? SHORT_PIFS : PIFS);
544 rt2x00pci_register_write(rt2x00dev, CSR18, reg);
545
546 rt2x00pci_register_read(rt2x00dev, CSR19, &reg);
547 rt2x00_set_field32(&reg, CSR19_DIFS,
548 short_slot_time ? SHORT_DIFS : DIFS);
549 rt2x00_set_field32(&reg, CSR19_EIFS, EIFS);
550 rt2x00pci_register_write(rt2x00dev, CSR19, reg);
551
552 rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
553 rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
554 rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
555 rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
556
557 rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
558 rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL, beacon_int * 16);
559 rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION, beacon_int * 16);
560 rt2x00pci_register_write(rt2x00dev, CSR12, reg);
561}
562
563static void rt2400pci_config(struct rt2x00_dev *rt2x00dev,
564 const unsigned int flags,
565 struct ieee80211_conf *conf)
566{
567 int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME;
568
569 if (flags & CONFIG_UPDATE_PHYMODE)
570 rt2400pci_config_phymode(rt2x00dev, conf->phymode);
571 if (flags & CONFIG_UPDATE_CHANNEL)
572 rt2400pci_config_channel(rt2x00dev, conf->channel_val,
573 conf->channel);
574 if (flags & CONFIG_UPDATE_TXPOWER)
575 rt2400pci_config_txpower(rt2x00dev, conf->power_level);
576 if (flags & CONFIG_UPDATE_ANTENNA)
577 rt2400pci_config_antenna(rt2x00dev, conf->antenna_sel_tx,
578 conf->antenna_sel_rx);
579 if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
580 rt2400pci_config_duration(rt2x00dev, short_slot_time,
581 conf->beacon_int);
582}
583
584static void rt2400pci_config_cw(struct rt2x00_dev *rt2x00dev,
585 struct ieee80211_tx_queue_params *params)
586{
587 u32 reg;
588
589 rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
590 rt2x00_set_field32(&reg, CSR11_CWMIN, params->cw_min);
591 rt2x00_set_field32(&reg, CSR11_CWMAX, params->cw_max);
592 rt2x00pci_register_write(rt2x00dev, CSR11, reg);
593}
594
595/*
596 * LED functions.
597 */
598static void rt2400pci_enable_led(struct rt2x00_dev *rt2x00dev)
599{
600 u32 reg;
601
602 rt2x00pci_register_read(rt2x00dev, LEDCSR, &reg);
603
604 rt2x00_set_field32(&reg, LEDCSR_ON_PERIOD, 70);
605 rt2x00_set_field32(&reg, LEDCSR_OFF_PERIOD, 30);
606
607 if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) {
608 rt2x00_set_field32(&reg, LEDCSR_LINK, 1);
609 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 0);
610 } else if (rt2x00dev->led_mode == LED_MODE_ASUS) {
611 rt2x00_set_field32(&reg, LEDCSR_LINK, 0);
612 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 1);
613 } else {
614 rt2x00_set_field32(&reg, LEDCSR_LINK, 1);
615 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 1);
616 }
617
618 rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
619}
620
621static void rt2400pci_disable_led(struct rt2x00_dev *rt2x00dev)
622{
623 u32 reg;
624
625 rt2x00pci_register_read(rt2x00dev, LEDCSR, &reg);
626 rt2x00_set_field32(&reg, LEDCSR_LINK, 0);
627 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 0);
628 rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
629}
630
631/*
632 * Link tuning
633 */
634static void rt2400pci_link_stats(struct rt2x00_dev *rt2x00dev)
635{
636 u32 reg;
637 u8 bbp;
638
639 /*
640 * Update FCS error count from register.
641 */
642 rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
643 rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR);
644
645 /*
646 * Update False CCA count from register.
647 */
648 rt2400pci_bbp_read(rt2x00dev, 39, &bbp);
649 rt2x00dev->link.false_cca = bbp;
650}
651
652static void rt2400pci_reset_tuner(struct rt2x00_dev *rt2x00dev)
653{
654 rt2400pci_bbp_write(rt2x00dev, 13, 0x08);
655 rt2x00dev->link.vgc_level = 0x08;
656}
657
658static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev)
659{
660 u8 reg;
661
662 /*
663 * The link tuner should not run longer then 60 seconds,
664 * and should run once every 2 seconds.
665 */
666 if (rt2x00dev->link.count > 60 || !(rt2x00dev->link.count & 1))
667 return;
668
669 /*
670 * Base r13 link tuning on the false cca count.
671 */
672 rt2400pci_bbp_read(rt2x00dev, 13, &reg);
673
674 if (rt2x00dev->link.false_cca > 512 && reg < 0x20) {
675 rt2400pci_bbp_write(rt2x00dev, 13, ++reg);
676 rt2x00dev->link.vgc_level = reg;
677 } else if (rt2x00dev->link.false_cca < 100 && reg > 0x08) {
678 rt2400pci_bbp_write(rt2x00dev, 13, --reg);
679 rt2x00dev->link.vgc_level = reg;
680 }
681}
682
683/*
684 * Initialization functions.
685 */
686static void rt2400pci_init_rxring(struct rt2x00_dev *rt2x00dev)
687{
688 struct data_ring *ring = rt2x00dev->rx;
689 struct data_desc *rxd;
690 unsigned int i;
691 u32 word;
692
693 memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
694
695 for (i = 0; i < ring->stats.limit; i++) {
696 rxd = ring->entry[i].priv;
697
698 rt2x00_desc_read(rxd, 2, &word);
699 rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH,
700 ring->data_size);
701 rt2x00_desc_write(rxd, 2, word);
702
703 rt2x00_desc_read(rxd, 1, &word);
704 rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS,
705 ring->entry[i].data_dma);
706 rt2x00_desc_write(rxd, 1, word);
707
708 rt2x00_desc_read(rxd, 0, &word);
709 rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
710 rt2x00_desc_write(rxd, 0, word);
711 }
712
713 rt2x00_ring_index_clear(rt2x00dev->rx);
714}
715
716static void rt2400pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue)
717{
718 struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue);
719 struct data_desc *txd;
720 unsigned int i;
721 u32 word;
722
723 memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
724
725 for (i = 0; i < ring->stats.limit; i++) {
726 txd = ring->entry[i].priv;
727
728 rt2x00_desc_read(txd, 1, &word);
729 rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS,
730 ring->entry[i].data_dma);
731 rt2x00_desc_write(txd, 1, word);
732
733 rt2x00_desc_read(txd, 2, &word);
734 rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH,
735 ring->data_size);
736 rt2x00_desc_write(txd, 2, word);
737
738 rt2x00_desc_read(txd, 0, &word);
739 rt2x00_set_field32(&word, TXD_W0_VALID, 0);
740 rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
741 rt2x00_desc_write(txd, 0, word);
742 }
743
744 rt2x00_ring_index_clear(ring);
745}
746
747static int rt2400pci_init_rings(struct rt2x00_dev *rt2x00dev)
748{
749 u32 reg;
750
751 /*
752 * Initialize rings.
753 */
754 rt2400pci_init_rxring(rt2x00dev);
755 rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
756 rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
757 rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON);
758 rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
759
760 /*
761 * Initialize registers.
762 */
763 rt2x00pci_register_read(rt2x00dev, TXCSR2, &reg);
764 rt2x00_set_field32(&reg, TXCSR2_TXD_SIZE,
765 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size);
766 rt2x00_set_field32(&reg, TXCSR2_NUM_TXD,
767 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit);
768 rt2x00_set_field32(&reg, TXCSR2_NUM_ATIM,
769 rt2x00dev->bcn[1].stats.limit);
770 rt2x00_set_field32(&reg, TXCSR2_NUM_PRIO,
771 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit);
772 rt2x00pci_register_write(rt2x00dev, TXCSR2, reg);
773
774 rt2x00pci_register_read(rt2x00dev, TXCSR3, &reg);
775 rt2x00_set_field32(&reg, TXCSR3_TX_RING_REGISTER,
776 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma);
777 rt2x00pci_register_write(rt2x00dev, TXCSR3, reg);
778
779 rt2x00pci_register_read(rt2x00dev, TXCSR5, &reg);
780 rt2x00_set_field32(&reg, TXCSR5_PRIO_RING_REGISTER,
781 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma);
782 rt2x00pci_register_write(rt2x00dev, TXCSR5, reg);
783
784 rt2x00pci_register_read(rt2x00dev, TXCSR4, &reg);
785 rt2x00_set_field32(&reg, TXCSR4_ATIM_RING_REGISTER,
786 rt2x00dev->bcn[1].data_dma);
787 rt2x00pci_register_write(rt2x00dev, TXCSR4, reg);
788
789 rt2x00pci_register_read(rt2x00dev, TXCSR6, &reg);
790 rt2x00_set_field32(&reg, TXCSR6_BEACON_RING_REGISTER,
791 rt2x00dev->bcn[0].data_dma);
792 rt2x00pci_register_write(rt2x00dev, TXCSR6, reg);
793
794 rt2x00pci_register_read(rt2x00dev, RXCSR1, &reg);
795 rt2x00_set_field32(&reg, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size);
796 rt2x00_set_field32(&reg, RXCSR1_NUM_RXD, rt2x00dev->rx->stats.limit);
797 rt2x00pci_register_write(rt2x00dev, RXCSR1, reg);
798
799 rt2x00pci_register_read(rt2x00dev, RXCSR2, &reg);
800 rt2x00_set_field32(&reg, RXCSR2_RX_RING_REGISTER,
801 rt2x00dev->rx->data_dma);
802 rt2x00pci_register_write(rt2x00dev, RXCSR2, reg);
803
804 return 0;
805}
806
807static int rt2400pci_init_registers(struct rt2x00_dev *rt2x00dev)
808{
809 u32 reg;
810
811 rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002);
812 rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002);
813 rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00023f20);
814 rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002);
815
816 rt2x00pci_register_read(rt2x00dev, TIMECSR, &reg);
817 rt2x00_set_field32(&reg, TIMECSR_US_COUNT, 33);
818 rt2x00_set_field32(&reg, TIMECSR_US_64_COUNT, 63);
819 rt2x00_set_field32(&reg, TIMECSR_BEACON_EXPECT, 0);
820 rt2x00pci_register_write(rt2x00dev, TIMECSR, reg);
821
822 rt2x00pci_register_read(rt2x00dev, CSR9, &reg);
823 rt2x00_set_field32(&reg, CSR9_MAX_FRAME_UNIT,
824 (rt2x00dev->rx->data_size / 128));
825 rt2x00pci_register_write(rt2x00dev, CSR9, reg);
826
827 rt2x00pci_register_write(rt2x00dev, CNT3, 0x3f080000);
828
829 rt2x00pci_register_read(rt2x00dev, ARCSR0, &reg);
830 rt2x00_set_field32(&reg, ARCSR0_AR_BBP_DATA0, 133);
831 rt2x00_set_field32(&reg, ARCSR0_AR_BBP_ID0, 134);
832 rt2x00_set_field32(&reg, ARCSR0_AR_BBP_DATA1, 136);
833 rt2x00_set_field32(&reg, ARCSR0_AR_BBP_ID1, 135);
834 rt2x00pci_register_write(rt2x00dev, ARCSR0, reg);
835
836 rt2x00pci_register_read(rt2x00dev, RXCSR3, &reg);
837 rt2x00_set_field32(&reg, RXCSR3_BBP_ID0, 3); /* Tx power.*/
838 rt2x00_set_field32(&reg, RXCSR3_BBP_ID0_VALID, 1);
839 rt2x00_set_field32(&reg, RXCSR3_BBP_ID1, 32); /* Signal */
840 rt2x00_set_field32(&reg, RXCSR3_BBP_ID1_VALID, 1);
841 rt2x00_set_field32(&reg, RXCSR3_BBP_ID2, 36); /* Rssi */
842 rt2x00_set_field32(&reg, RXCSR3_BBP_ID2_VALID, 1);
843 rt2x00pci_register_write(rt2x00dev, RXCSR3, reg);
844
845 rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100);
846
847 if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
848 return -EBUSY;
849
850 rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00217223);
851 rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518);
852
853 rt2x00pci_register_read(rt2x00dev, MACCSR2, &reg);
854 rt2x00_set_field32(&reg, MACCSR2_DELAY, 64);
855 rt2x00pci_register_write(rt2x00dev, MACCSR2, reg);
856
857 rt2x00pci_register_read(rt2x00dev, RALINKCSR, &reg);
858 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA0, 17);
859 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID0, 154);
860 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA1, 0);
861 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID1, 154);
862 rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg);
863
864 rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
865 rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 1);
866 rt2x00_set_field32(&reg, CSR1_BBP_RESET, 0);
867 rt2x00_set_field32(&reg, CSR1_HOST_READY, 0);
868 rt2x00pci_register_write(rt2x00dev, CSR1, reg);
869
870 rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
871 rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 0);
872 rt2x00_set_field32(&reg, CSR1_HOST_READY, 1);
873 rt2x00pci_register_write(rt2x00dev, CSR1, reg);
874
875 /*
876 * We must clear the FCS and FIFO error count.
877 * These registers are cleared on read,
878 * so we may pass a useless variable to store the value.
879 */
880 rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
881 rt2x00pci_register_read(rt2x00dev, CNT4, &reg);
882
883 return 0;
884}
885
886static int rt2400pci_init_bbp(struct rt2x00_dev *rt2x00dev)
887{
888 unsigned int i;
889 u16 eeprom;
890 u8 reg_id;
891 u8 value;
892
893 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
894 rt2400pci_bbp_read(rt2x00dev, 0, &value);
895 if ((value != 0xff) && (value != 0x00))
896 goto continue_csr_init;
897 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
898 udelay(REGISTER_BUSY_DELAY);
899 }
900
901 ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
902 return -EACCES;
903
904continue_csr_init:
905 rt2400pci_bbp_write(rt2x00dev, 1, 0x00);
906 rt2400pci_bbp_write(rt2x00dev, 3, 0x27);
907 rt2400pci_bbp_write(rt2x00dev, 4, 0x08);
908 rt2400pci_bbp_write(rt2x00dev, 10, 0x0f);
909 rt2400pci_bbp_write(rt2x00dev, 15, 0x72);
910 rt2400pci_bbp_write(rt2x00dev, 16, 0x74);
911 rt2400pci_bbp_write(rt2x00dev, 17, 0x20);
912 rt2400pci_bbp_write(rt2x00dev, 18, 0x72);
913 rt2400pci_bbp_write(rt2x00dev, 19, 0x0b);
914 rt2400pci_bbp_write(rt2x00dev, 20, 0x00);
915 rt2400pci_bbp_write(rt2x00dev, 28, 0x11);
916 rt2400pci_bbp_write(rt2x00dev, 29, 0x04);
917 rt2400pci_bbp_write(rt2x00dev, 30, 0x21);
918 rt2400pci_bbp_write(rt2x00dev, 31, 0x00);
919
920 DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
921 for (i = 0; i < EEPROM_BBP_SIZE; i++) {
922 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
923
924 if (eeprom != 0xffff && eeprom != 0x0000) {
925 reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
926 value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
927 DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
928 reg_id, value);
929 rt2400pci_bbp_write(rt2x00dev, reg_id, value);
930 }
931 }
932 DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
933
934 return 0;
935}
936
937/*
938 * Device state switch handlers.
939 */
940static void rt2400pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
941 enum dev_state state)
942{
943 u32 reg;
944
945 rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
946 rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
947 state == STATE_RADIO_RX_OFF);
948 rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
949}
950
951static void rt2400pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
952 enum dev_state state)
953{
954 int mask = (state == STATE_RADIO_IRQ_OFF);
955 u32 reg;
956
957 /*
958 * When interrupts are being enabled, the interrupt registers
959 * should clear the register to assure a clean state.
960 */
961 if (state == STATE_RADIO_IRQ_ON) {
962 rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
963 rt2x00pci_register_write(rt2x00dev, CSR7, reg);
964 }
965
966 /*
967 * Only toggle the interrupts bits we are going to use.
968 * Non-checked interrupt bits are disabled by default.
969 */
970 rt2x00pci_register_read(rt2x00dev, CSR8, &reg);
971 rt2x00_set_field32(&reg, CSR8_TBCN_EXPIRE, mask);
972 rt2x00_set_field32(&reg, CSR8_TXDONE_TXRING, mask);
973 rt2x00_set_field32(&reg, CSR8_TXDONE_ATIMRING, mask);
974 rt2x00_set_field32(&reg, CSR8_TXDONE_PRIORING, mask);
975 rt2x00_set_field32(&reg, CSR8_RXDONE, mask);
976 rt2x00pci_register_write(rt2x00dev, CSR8, reg);
977}
978
979static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev)
980{
981 /*
982 * Initialize all registers.
983 */
984 if (rt2400pci_init_rings(rt2x00dev) ||
985 rt2400pci_init_registers(rt2x00dev) ||
986 rt2400pci_init_bbp(rt2x00dev)) {
987 ERROR(rt2x00dev, "Register initialization failed.\n");
988 return -EIO;
989 }
990
991 /*
992 * Enable interrupts.
993 */
994 rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON);
995
996 /*
997 * Enable LED
998 */
999 rt2400pci_enable_led(rt2x00dev);
1000
1001 return 0;
1002}
1003
1004static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev)
1005{
1006 u32 reg;
1007
1008 /*
1009 * Disable LED
1010 */
1011 rt2400pci_disable_led(rt2x00dev);
1012
1013 rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
1014
1015 /*
1016 * Disable synchronisation.
1017 */
1018 rt2x00pci_register_write(rt2x00dev, CSR14, 0);
1019
1020 /*
1021 * Cancel RX and TX.
1022 */
1023 rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1024 rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
1025 rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1026
1027 /*
1028 * Disable interrupts.
1029 */
1030 rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF);
1031}
1032
1033static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev,
1034 enum dev_state state)
1035{
1036 u32 reg;
1037 unsigned int i;
1038 char put_to_sleep;
1039 char bbp_state;
1040 char rf_state;
1041
1042 put_to_sleep = (state != STATE_AWAKE);
1043
1044 rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
1045 rt2x00_set_field32(&reg, PWRCSR1_SET_STATE, 1);
1046 rt2x00_set_field32(&reg, PWRCSR1_BBP_DESIRE_STATE, state);
1047 rt2x00_set_field32(&reg, PWRCSR1_RF_DESIRE_STATE, state);
1048 rt2x00_set_field32(&reg, PWRCSR1_PUT_TO_SLEEP, put_to_sleep);
1049 rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg);
1050
1051 /*
1052 * Device is not guaranteed to be in the requested state yet.
1053 * We must wait until the register indicates that the
1054 * device has entered the correct state.
1055 */
1056 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1057 rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
1058 bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE);
1059 rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE);
1060 if (bbp_state == state && rf_state == state)
1061 return 0;
1062 msleep(10);
1063 }
1064
1065 NOTICE(rt2x00dev, "Device failed to enter state %d, "
1066 "current device state: bbp %d and rf %d.\n",
1067 state, bbp_state, rf_state);
1068
1069 return -EBUSY;
1070}
1071
1072static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
1073 enum dev_state state)
1074{
1075 int retval = 0;
1076
1077 switch (state) {
1078 case STATE_RADIO_ON:
1079 retval = rt2400pci_enable_radio(rt2x00dev);
1080 break;
1081 case STATE_RADIO_OFF:
1082 rt2400pci_disable_radio(rt2x00dev);
1083 break;
1084 case STATE_RADIO_RX_ON:
1085 case STATE_RADIO_RX_OFF:
1086 rt2400pci_toggle_rx(rt2x00dev, state);
1087 break;
1088 case STATE_DEEP_SLEEP:
1089 case STATE_SLEEP:
1090 case STATE_STANDBY:
1091 case STATE_AWAKE:
1092 retval = rt2400pci_set_state(rt2x00dev, state);
1093 break;
1094 default:
1095 retval = -ENOTSUPP;
1096 break;
1097 }
1098
1099 return retval;
1100}
1101
1102/*
1103 * TX descriptor initialization
1104 */
1105static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1106 struct data_desc *txd,
1107 struct data_entry_desc *desc,
1108 struct ieee80211_hdr *ieee80211hdr,
1109 unsigned int length,
1110 struct ieee80211_tx_control *control)
1111{
1112 u32 word;
1113 u32 signal = 0;
1114 u32 service = 0;
1115 u32 length_high = 0;
1116 u32 length_low = 0;
1117
1118 /*
1119 * The PLCP values should be treated as if they
1120 * were BBP values.
1121 */
1122 rt2x00_set_field32(&signal, BBPCSR_VALUE, desc->signal);
1123 rt2x00_set_field32(&signal, BBPCSR_REGNUM, 5);
1124 rt2x00_set_field32(&signal, BBPCSR_BUSY, 1);
1125
1126 rt2x00_set_field32(&service, BBPCSR_VALUE, desc->service);
1127 rt2x00_set_field32(&service, BBPCSR_REGNUM, 6);
1128 rt2x00_set_field32(&service, BBPCSR_BUSY, 1);
1129
1130 rt2x00_set_field32(&length_high, BBPCSR_VALUE, desc->length_high);
1131 rt2x00_set_field32(&length_high, BBPCSR_REGNUM, 7);
1132 rt2x00_set_field32(&length_high, BBPCSR_BUSY, 1);
1133
1134 rt2x00_set_field32(&length_low, BBPCSR_VALUE, desc->length_low);
1135 rt2x00_set_field32(&length_low, BBPCSR_REGNUM, 8);
1136 rt2x00_set_field32(&length_low, BBPCSR_BUSY, 1);
1137
1138 /*
1139 * Start writing the descriptor words.
1140 */
1141 rt2x00_desc_read(txd, 2, &word);
1142 rt2x00_set_field32(&word, TXD_W2_DATABYTE_COUNT, length);
1143 rt2x00_desc_write(txd, 2, word);
1144
1145 rt2x00_desc_read(txd, 3, &word);
1146 rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, signal);
1147 rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, service);
1148 rt2x00_desc_write(txd, 3, word);
1149
1150 rt2x00_desc_read(txd, 4, &word);
1151 rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_LOW, length_low);
1152 rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_HIGH, length_high);
1153 rt2x00_desc_write(txd, 4, word);
1154
1155 rt2x00_desc_read(txd, 0, &word);
1156 rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
1157 rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1158 rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1159 test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
1160 rt2x00_set_field32(&word, TXD_W0_ACK,
1161 !(control->flags & IEEE80211_TXCTL_NO_ACK));
1162 rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1163 test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
1164 rt2x00_set_field32(&word, TXD_W0_RTS,
1165 test_bit(ENTRY_TXD_RTS_FRAME, &desc->flags));
1166 rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
1167 rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1168 !!(control->flags &
1169 IEEE80211_TXCTL_LONG_RETRY_LIMIT));
1170 rt2x00_desc_write(txd, 0, word);
1171}
1172
1173/*
1174 * TX data initialization
1175 */
1176static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1177 unsigned int queue)
1178{
1179 u32 reg;
1180
1181 if (queue == IEEE80211_TX_QUEUE_BEACON) {
1182 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
1183 if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
1184 rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
1185 rt2x00pci_register_write(rt2x00dev, CSR14, reg);
1186 }
1187 return;
1188 }
1189
1190 rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1191 if (queue == IEEE80211_TX_QUEUE_DATA0)
1192 rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO, 1);
1193 else if (queue == IEEE80211_TX_QUEUE_DATA1)
1194 rt2x00_set_field32(&reg, TXCSR0_KICK_TX, 1);
1195 else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON)
1196 rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM, 1);
1197 rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1198}
1199
1200/*
1201 * RX control handlers
1202 */
1203static int rt2400pci_fill_rxdone(struct data_entry *entry,
1204 int *signal, int *rssi, int *ofdm, int *size)
1205{
1206 struct data_desc *rxd = entry->priv;
1207 u32 word0;
1208 u32 word2;
1209
1210 rt2x00_desc_read(rxd, 0, &word0);
1211 rt2x00_desc_read(rxd, 2, &word2);
1212
1213 if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
1214 rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
1215 return -EINVAL;
1216
1217 /*
1218 * Obtain the status about this packet.
1219 */
1220 *signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
1221 *rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
1222 entry->ring->rt2x00dev->rssi_offset;
1223 *ofdm = 0;
1224 *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1225
1226 return 0;
1227}
1228
1229/*
1230 * Interrupt functions.
1231 */
1232static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue)
1233{
1234 struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue);
1235 struct data_entry *entry;
1236 struct data_desc *txd;
1237 u32 word;
1238 int tx_status;
1239 int retry;
1240
1241 while (!rt2x00_ring_empty(ring)) {
1242 entry = rt2x00_get_data_entry_done(ring);
1243 txd = entry->priv;
1244 rt2x00_desc_read(txd, 0, &word);
1245
1246 if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
1247 !rt2x00_get_field32(word, TXD_W0_VALID))
1248 break;
1249
1250 /*
1251 * Obtain the status about this packet.
1252 */
1253 tx_status = rt2x00_get_field32(word, TXD_W0_RESULT);
1254 retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
1255
1256 rt2x00lib_txdone(entry, tx_status, retry);
1257
1258 /*
1259 * Make this entry available for reuse.
1260 */
1261 entry->flags = 0;
1262 rt2x00_set_field32(&word, TXD_W0_VALID, 0);
1263 rt2x00_desc_write(txd, 0, word);
1264 rt2x00_ring_index_done_inc(ring);
1265 }
1266
1267 /*
1268 * If the data ring was full before the txdone handler
1269 * we must make sure the packet queue in the mac80211 stack
1270 * is reenabled when the txdone handler has finished.
1271 */
1272 entry = ring->entry;
1273 if (!rt2x00_ring_full(ring))
1274 ieee80211_wake_queue(rt2x00dev->hw,
1275 entry->tx_status.control.queue);
1276}
1277
1278static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
1279{
1280 struct rt2x00_dev *rt2x00dev = dev_instance;
1281 u32 reg;
1282
1283 /*
1284 * Get the interrupt sources & saved to local variable.
1285 * Write register value back to clear pending interrupts.
1286 */
1287 rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1288 rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1289
1290 if (!reg)
1291 return IRQ_NONE;
1292
1293 if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
1294 return IRQ_HANDLED;
1295
1296 /*
1297 * Handle interrupts, walk through all bits
1298 * and run the tasks, the bits are checked in order of
1299 * priority.
1300 */
1301
1302 /*
1303 * 1 - Beacon timer expired interrupt.
1304 */
1305 if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE))
1306 rt2x00lib_beacondone(rt2x00dev);
1307
1308 /*
1309 * 2 - Rx ring done interrupt.
1310 */
1311 if (rt2x00_get_field32(reg, CSR7_RXDONE))
1312 rt2x00pci_rxdone(rt2x00dev);
1313
1314 /*
1315 * 3 - Atim ring transmit done interrupt.
1316 */
1317 if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING))
1318 rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON);
1319
1320 /*
1321 * 4 - Priority ring transmit done interrupt.
1322 */
1323 if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
1324 rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
1325
1326 /*
1327 * 5 - Tx ring transmit done interrupt.
1328 */
1329 if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
1330 rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
1331
1332 return IRQ_HANDLED;
1333}
1334
1335/*
1336 * Device probe functions.
1337 */
1338static int rt2400pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1339{
1340 struct eeprom_93cx6 eeprom;
1341 u32 reg;
1342 u16 word;
1343 u8 *mac;
1344
1345 rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
1346
1347 eeprom.data = rt2x00dev;
1348 eeprom.register_read = rt2400pci_eepromregister_read;
1349 eeprom.register_write = rt2400pci_eepromregister_write;
1350 eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ?
1351 PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
1352 eeprom.reg_data_in = 0;
1353 eeprom.reg_data_out = 0;
1354 eeprom.reg_data_clock = 0;
1355 eeprom.reg_chip_select = 0;
1356
1357 eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
1358 EEPROM_SIZE / sizeof(u16));
1359
1360 /*
1361 * Start validation of the data that has been read.
1362 */
1363 mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1364 if (!is_valid_ether_addr(mac)) {
1365 random_ether_addr(mac);
1366 EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac));
1367 }
1368
1369 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1370 if (word == 0xffff) {
1371 ERROR(rt2x00dev, "Invalid EEPROM data detected.\n");
1372 return -EINVAL;
1373 }
1374
1375 return 0;
1376}
1377
1378static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
1379{
1380 u32 reg;
1381 u16 value;
1382 u16 eeprom;
1383
1384 /*
1385 * Read EEPROM word for configuration.
1386 */
1387 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1388
1389 /*
1390 * Identify RF chipset.
1391 */
1392 value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1393 rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
1394 rt2x00_set_chip(rt2x00dev, RT2460, value, reg);
1395
1396 if (!rt2x00_rf(&rt2x00dev->chip, RF2420) &&
1397 !rt2x00_rf(&rt2x00dev->chip, RF2421)) {
1398 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1399 return -ENODEV;
1400 }
1401
1402 /*
1403 * Identify default antenna configuration.
1404 */
1405 rt2x00dev->hw->conf.antenna_sel_tx =
1406 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1407 rt2x00dev->hw->conf.antenna_sel_rx =
1408 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1409
1410 /*
1411 * Store led mode, for correct led behaviour.
1412 */
1413 rt2x00dev->led_mode =
1414 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1415
1416 /*
1417 * Detect if this device has an hardware controlled radio.
1418 */
1419 if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
1420 __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
1421
1422 /*
1423 * Check if the BBP tuning should be enabled.
1424 */
1425 if (!rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_AGCVGC_TUNING))
1426 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1427
1428 return 0;
1429}
1430
1431/*
1432 * RF value list for RF2420 & RF2421
1433 * Supports: 2.4 GHz
1434 */
1435static const struct rf_channel rf_vals_bg[] = {
1436 { 1, 0x00022058, 0x000c1fda, 0x00000101, 0 },
1437 { 2, 0x00022058, 0x000c1fee, 0x00000101, 0 },
1438 { 3, 0x00022058, 0x000c2002, 0x00000101, 0 },
1439 { 4, 0x00022058, 0x000c2016, 0x00000101, 0 },
1440 { 5, 0x00022058, 0x000c202a, 0x00000101, 0 },
1441 { 6, 0x00022058, 0x000c203e, 0x00000101, 0 },
1442 { 7, 0x00022058, 0x000c2052, 0x00000101, 0 },
1443 { 8, 0x00022058, 0x000c2066, 0x00000101, 0 },
1444 { 9, 0x00022058, 0x000c207a, 0x00000101, 0 },
1445 { 10, 0x00022058, 0x000c208e, 0x00000101, 0 },
1446 { 11, 0x00022058, 0x000c20a2, 0x00000101, 0 },
1447 { 12, 0x00022058, 0x000c20b6, 0x00000101, 0 },
1448 { 13, 0x00022058, 0x000c20ca, 0x00000101, 0 },
1449 { 14, 0x00022058, 0x000c20fa, 0x00000101, 0 },
1450};
1451
1452static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1453{
1454 struct hw_mode_spec *spec = &rt2x00dev->spec;
1455 u8 *txpower;
1456 unsigned int i;
1457
1458 /*
1459 * Initialize all hw fields.
1460 */
1461 rt2x00dev->hw->flags =
1462 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1463 IEEE80211_HW_MONITOR_DURING_OPER |
1464 IEEE80211_HW_NO_PROBE_FILTERING;
1465 rt2x00dev->hw->extra_tx_headroom = 0;
1466 rt2x00dev->hw->max_signal = MAX_SIGNAL;
1467 rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1468 rt2x00dev->hw->queues = 2;
1469
1470 SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
1471 SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1472 rt2x00_eeprom_addr(rt2x00dev,
1473 EEPROM_MAC_ADDR_0));
1474
1475 /*
1476 * Convert tx_power array in eeprom.
1477 */
1478 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1479 for (i = 0; i < 14; i++)
1480 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1481
1482 /*
1483 * Initialize hw_mode information.
1484 */
1485 spec->num_modes = 1;
1486 spec->num_rates = 4;
1487 spec->tx_power_a = NULL;
1488 spec->tx_power_bg = txpower;
1489 spec->tx_power_default = DEFAULT_TXPOWER;
1490
1491 spec->num_channels = ARRAY_SIZE(rf_vals_bg);
1492 spec->channels = rf_vals_bg;
1493}
1494
1495static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
1496{
1497 int retval;
1498
1499 /*
1500 * Allocate eeprom data.
1501 */
1502 retval = rt2400pci_validate_eeprom(rt2x00dev);
1503 if (retval)
1504 return retval;
1505
1506 retval = rt2400pci_init_eeprom(rt2x00dev);
1507 if (retval)
1508 return retval;
1509
1510 /*
1511 * Initialize hw specifications.
1512 */
1513 rt2400pci_probe_hw_mode(rt2x00dev);
1514
1515 /*
1516 * This device requires the beacon ring
1517 */
1518 __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
1519
1520 /*
1521 * Set the rssi offset.
1522 */
1523 rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1524
1525 return 0;
1526}
1527
1528/*
1529 * IEEE80211 stack callback functions.
1530 */
1531static int rt2400pci_set_retry_limit(struct ieee80211_hw *hw,
1532 u32 short_retry, u32 long_retry)
1533{
1534 struct rt2x00_dev *rt2x00dev = hw->priv;
1535 u32 reg;
1536
1537 rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
1538 rt2x00_set_field32(&reg, CSR11_LONG_RETRY, long_retry);
1539 rt2x00_set_field32(&reg, CSR11_SHORT_RETRY, short_retry);
1540 rt2x00pci_register_write(rt2x00dev, CSR11, reg);
1541
1542 return 0;
1543}
1544
1545static int rt2400pci_conf_tx(struct ieee80211_hw *hw,
1546 int queue,
1547 const struct ieee80211_tx_queue_params *params)
1548{
1549 struct rt2x00_dev *rt2x00dev = hw->priv;
1550
1551 /*
1552 * We don't support variating cw_min and cw_max variables
1553 * per queue. So by default we only configure the TX queue,
1554 * and ignore all other configurations.
1555 */
1556 if (queue != IEEE80211_TX_QUEUE_DATA0)
1557 return -EINVAL;
1558
1559 if (rt2x00mac_conf_tx(hw, queue, params))
1560 return -EINVAL;
1561
1562 /*
1563 * Write configuration to register.
1564 */
1565 rt2400pci_config_cw(rt2x00dev, &rt2x00dev->tx->tx_params);
1566
1567 return 0;
1568}
1569
1570static u64 rt2400pci_get_tsf(struct ieee80211_hw *hw)
1571{
1572 struct rt2x00_dev *rt2x00dev = hw->priv;
1573 u64 tsf;
1574 u32 reg;
1575
1576 rt2x00pci_register_read(rt2x00dev, CSR17, &reg);
1577 tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32;
1578 rt2x00pci_register_read(rt2x00dev, CSR16, &reg);
1579 tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER);
1580
1581 return tsf;
1582}
1583
1584static void rt2400pci_reset_tsf(struct ieee80211_hw *hw)
1585{
1586 struct rt2x00_dev *rt2x00dev = hw->priv;
1587
1588 rt2x00pci_register_write(rt2x00dev, CSR16, 0);
1589 rt2x00pci_register_write(rt2x00dev, CSR17, 0);
1590}
1591
1592static int rt2400pci_tx_last_beacon(struct ieee80211_hw *hw)
1593{
1594 struct rt2x00_dev *rt2x00dev = hw->priv;
1595 u32 reg;
1596
1597 rt2x00pci_register_read(rt2x00dev, CSR15, &reg);
1598 return rt2x00_get_field32(reg, CSR15_BEACON_SENT);
1599}
1600
1601static const struct ieee80211_ops rt2400pci_mac80211_ops = {
1602 .tx = rt2x00mac_tx,
1603 .add_interface = rt2x00mac_add_interface,
1604 .remove_interface = rt2x00mac_remove_interface,
1605 .config = rt2x00mac_config,
1606 .config_interface = rt2x00mac_config_interface,
1607 .set_multicast_list = rt2x00mac_set_multicast_list,
1608 .get_stats = rt2x00mac_get_stats,
1609 .set_retry_limit = rt2400pci_set_retry_limit,
1610 .conf_tx = rt2400pci_conf_tx,
1611 .get_tx_stats = rt2x00mac_get_tx_stats,
1612 .get_tsf = rt2400pci_get_tsf,
1613 .reset_tsf = rt2400pci_reset_tsf,
1614 .beacon_update = rt2x00pci_beacon_update,
1615 .tx_last_beacon = rt2400pci_tx_last_beacon,
1616};
1617
1618static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
1619 .irq_handler = rt2400pci_interrupt,
1620 .probe_hw = rt2400pci_probe_hw,
1621 .initialize = rt2x00pci_initialize,
1622 .uninitialize = rt2x00pci_uninitialize,
1623 .set_device_state = rt2400pci_set_device_state,
1624#ifdef CONFIG_RT2400PCI_RFKILL
1625 .rfkill_poll = rt2400pci_rfkill_poll,
1626#endif /* CONFIG_RT2400PCI_RFKILL */
1627 .link_stats = rt2400pci_link_stats,
1628 .reset_tuner = rt2400pci_reset_tuner,
1629 .link_tuner = rt2400pci_link_tuner,
1630 .write_tx_desc = rt2400pci_write_tx_desc,
1631 .write_tx_data = rt2x00pci_write_tx_data,
1632 .kick_tx_queue = rt2400pci_kick_tx_queue,
1633 .fill_rxdone = rt2400pci_fill_rxdone,
1634 .config_mac_addr = rt2400pci_config_mac_addr,
1635 .config_bssid = rt2400pci_config_bssid,
1636 .config_packet_filter = rt2400pci_config_packet_filter,
1637 .config_type = rt2400pci_config_type,
1638 .config = rt2400pci_config,
1639};
1640
1641static const struct rt2x00_ops rt2400pci_ops = {
1642 .name = DRV_NAME,
1643 .rxd_size = RXD_DESC_SIZE,
1644 .txd_size = TXD_DESC_SIZE,
1645 .eeprom_size = EEPROM_SIZE,
1646 .rf_size = RF_SIZE,
1647 .lib = &rt2400pci_rt2x00_ops,
1648 .hw = &rt2400pci_mac80211_ops,
1649#ifdef CONFIG_RT2X00_LIB_DEBUGFS
1650 .debugfs = &rt2400pci_rt2x00debug,
1651#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1652};
1653
1654/*
1655 * RT2400pci module information.
1656 */
1657static struct pci_device_id rt2400pci_device_table[] = {
1658 { PCI_DEVICE(0x1814, 0x0101), PCI_DEVICE_DATA(&rt2400pci_ops) },
1659 { 0, }
1660};
1661
1662MODULE_AUTHOR(DRV_PROJECT);
1663MODULE_VERSION(DRV_VERSION);
1664MODULE_DESCRIPTION("Ralink RT2400 PCI & PCMCIA Wireless LAN driver.");
1665MODULE_SUPPORTED_DEVICE("Ralink RT2460 PCI & PCMCIA chipset based cards");
1666MODULE_DEVICE_TABLE(pci, rt2400pci_device_table);
1667MODULE_LICENSE("GPL");
1668
1669static struct pci_driver rt2400pci_driver = {
1670 .name = DRV_NAME,
1671 .id_table = rt2400pci_device_table,
1672 .probe = rt2x00pci_probe,
1673 .remove = __devexit_p(rt2x00pci_remove),
1674 .suspend = rt2x00pci_suspend,
1675 .resume = rt2x00pci_resume,
1676};
1677
1678static int __init rt2400pci_init(void)
1679{
1680 return pci_register_driver(&rt2400pci_driver);
1681}
1682
1683static void __exit rt2400pci_exit(void)
1684{
1685 pci_unregister_driver(&rt2400pci_driver);
1686}
1687
1688module_init(rt2400pci_init);
1689module_exit(rt2400pci_exit);
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
new file mode 100644
index 000000000000..ae22501f085d
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -0,0 +1,943 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2400pci
23 Abstract: Data structures and registers for the rt2400pci module.
24 Supported chipsets: RT2460.
25 */
26
27#ifndef RT2400PCI_H
28#define RT2400PCI_H
29
30/*
31 * RF chip defines.
32 */
33#define RF2420 0x0000
34#define RF2421 0x0001
35
36/*
37 * Signal information.
38 * Defaul offset is required for RSSI <-> dBm conversion.
39 */
40#define MAX_SIGNAL 100
41#define MAX_RX_SSI -1
42#define DEFAULT_RSSI_OFFSET 100
43
44/*
45 * Register layout information.
46 */
47#define CSR_REG_BASE 0x0000
48#define CSR_REG_SIZE 0x014c
49#define EEPROM_BASE 0x0000
50#define EEPROM_SIZE 0x0100
51#define BBP_SIZE 0x0020
52#define RF_SIZE 0x0010
53
54/*
55 * Control/Status Registers(CSR).
56 * Some values are set in TU, whereas 1 TU == 1024 us.
57 */
58
59/*
60 * CSR0: ASIC revision number.
61 */
62#define CSR0 0x0000
63
64/*
65 * CSR1: System control register.
66 * SOFT_RESET: Software reset, 1: reset, 0: normal.
67 * BBP_RESET: Hardware reset, 1: reset, 0, release.
68 * HOST_READY: Host ready after initialization.
69 */
70#define CSR1 0x0004
71#define CSR1_SOFT_RESET FIELD32(0x00000001)
72#define CSR1_BBP_RESET FIELD32(0x00000002)
73#define CSR1_HOST_READY FIELD32(0x00000004)
74
75/*
76 * CSR2: System admin status register (invalid).
77 */
78#define CSR2 0x0008
79
80/*
81 * CSR3: STA MAC address register 0.
82 */
83#define CSR3 0x000c
84#define CSR3_BYTE0 FIELD32(0x000000ff)
85#define CSR3_BYTE1 FIELD32(0x0000ff00)
86#define CSR3_BYTE2 FIELD32(0x00ff0000)
87#define CSR3_BYTE3 FIELD32(0xff000000)
88
89/*
90 * CSR4: STA MAC address register 1.
91 */
92#define CSR4 0x0010
93#define CSR4_BYTE4 FIELD32(0x000000ff)
94#define CSR4_BYTE5 FIELD32(0x0000ff00)
95
96/*
97 * CSR5: BSSID register 0.
98 */
99#define CSR5 0x0014
100#define CSR5_BYTE0 FIELD32(0x000000ff)
101#define CSR5_BYTE1 FIELD32(0x0000ff00)
102#define CSR5_BYTE2 FIELD32(0x00ff0000)
103#define CSR5_BYTE3 FIELD32(0xff000000)
104
105/*
106 * CSR6: BSSID register 1.
107 */
108#define CSR6 0x0018
109#define CSR6_BYTE4 FIELD32(0x000000ff)
110#define CSR6_BYTE5 FIELD32(0x0000ff00)
111
112/*
113 * CSR7: Interrupt source register.
114 * Write 1 to clear interrupt.
115 * TBCN_EXPIRE: Beacon timer expired interrupt.
116 * TWAKE_EXPIRE: Wakeup timer expired interrupt.
117 * TATIMW_EXPIRE: Timer of atim window expired interrupt.
118 * TXDONE_TXRING: Tx ring transmit done interrupt.
119 * TXDONE_ATIMRING: Atim ring transmit done interrupt.
120 * TXDONE_PRIORING: Priority ring transmit done interrupt.
121 * RXDONE: Receive done interrupt.
122 */
123#define CSR7 0x001c
124#define CSR7_TBCN_EXPIRE FIELD32(0x00000001)
125#define CSR7_TWAKE_EXPIRE FIELD32(0x00000002)
126#define CSR7_TATIMW_EXPIRE FIELD32(0x00000004)
127#define CSR7_TXDONE_TXRING FIELD32(0x00000008)
128#define CSR7_TXDONE_ATIMRING FIELD32(0x00000010)
129#define CSR7_TXDONE_PRIORING FIELD32(0x00000020)
130#define CSR7_RXDONE FIELD32(0x00000040)
131
132/*
133 * CSR8: Interrupt mask register.
134 * Write 1 to mask interrupt.
135 * TBCN_EXPIRE: Beacon timer expired interrupt.
136 * TWAKE_EXPIRE: Wakeup timer expired interrupt.
137 * TATIMW_EXPIRE: Timer of atim window expired interrupt.
138 * TXDONE_TXRING: Tx ring transmit done interrupt.
139 * TXDONE_ATIMRING: Atim ring transmit done interrupt.
140 * TXDONE_PRIORING: Priority ring transmit done interrupt.
141 * RXDONE: Receive done interrupt.
142 */
143#define CSR8 0x0020
144#define CSR8_TBCN_EXPIRE FIELD32(0x00000001)
145#define CSR8_TWAKE_EXPIRE FIELD32(0x00000002)
146#define CSR8_TATIMW_EXPIRE FIELD32(0x00000004)
147#define CSR8_TXDONE_TXRING FIELD32(0x00000008)
148#define CSR8_TXDONE_ATIMRING FIELD32(0x00000010)
149#define CSR8_TXDONE_PRIORING FIELD32(0x00000020)
150#define CSR8_RXDONE FIELD32(0x00000040)
151
152/*
153 * CSR9: Maximum frame length register.
154 * MAX_FRAME_UNIT: Maximum frame length in 128b unit, default: 12.
155 */
156#define CSR9 0x0024
157#define CSR9_MAX_FRAME_UNIT FIELD32(0x00000f80)
158
159/*
160 * CSR11: Back-off control register.
161 * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1).
162 * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1).
163 * SLOT_TIME: Slot time, default is 20us for 802.11b.
164 * LONG_RETRY: Long retry count.
165 * SHORT_RETRY: Short retry count.
166 */
167#define CSR11 0x002c
168#define CSR11_CWMIN FIELD32(0x0000000f)
169#define CSR11_CWMAX FIELD32(0x000000f0)
170#define CSR11_SLOT_TIME FIELD32(0x00001f00)
171#define CSR11_LONG_RETRY FIELD32(0x00ff0000)
172#define CSR11_SHORT_RETRY FIELD32(0xff000000)
173
174/*
175 * CSR12: Synchronization configuration register 0.
176 * All units in 1/16 TU.
177 * BEACON_INTERVAL: Beacon interval, default is 100 TU.
178 * CFPMAX_DURATION: Cfp maximum duration, default is 100 TU.
179 */
180#define CSR12 0x0030
181#define CSR12_BEACON_INTERVAL FIELD32(0x0000ffff)
182#define CSR12_CFP_MAX_DURATION FIELD32(0xffff0000)
183
184/*
185 * CSR13: Synchronization configuration register 1.
186 * All units in 1/16 TU.
187 * ATIMW_DURATION: Atim window duration.
188 * CFP_PERIOD: Cfp period, default is 0 TU.
189 */
190#define CSR13 0x0034
191#define CSR13_ATIMW_DURATION FIELD32(0x0000ffff)
192#define CSR13_CFP_PERIOD FIELD32(0x00ff0000)
193
194/*
195 * CSR14: Synchronization control register.
196 * TSF_COUNT: Enable tsf auto counting.
197 * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
198 * TBCN: Enable tbcn with reload value.
199 * TCFP: Enable tcfp & cfp / cp switching.
200 * TATIMW: Enable tatimw & atim window switching.
201 * BEACON_GEN: Enable beacon generator.
202 * CFP_COUNT_PRELOAD: Cfp count preload value.
203 * TBCM_PRELOAD: Tbcn preload value in units of 64us.
204 */
205#define CSR14 0x0038
206#define CSR14_TSF_COUNT FIELD32(0x00000001)
207#define CSR14_TSF_SYNC FIELD32(0x00000006)
208#define CSR14_TBCN FIELD32(0x00000008)
209#define CSR14_TCFP FIELD32(0x00000010)
210#define CSR14_TATIMW FIELD32(0x00000020)
211#define CSR14_BEACON_GEN FIELD32(0x00000040)
212#define CSR14_CFP_COUNT_PRELOAD FIELD32(0x0000ff00)
213#define CSR14_TBCM_PRELOAD FIELD32(0xffff0000)
214
215/*
216 * CSR15: Synchronization status register.
217 * CFP: ASIC is in contention-free period.
218 * ATIMW: ASIC is in ATIM window.
219 * BEACON_SENT: Beacon is send.
220 */
221#define CSR15 0x003c
222#define CSR15_CFP FIELD32(0x00000001)
223#define CSR15_ATIMW FIELD32(0x00000002)
224#define CSR15_BEACON_SENT FIELD32(0x00000004)
225
226/*
227 * CSR16: TSF timer register 0.
228 */
229#define CSR16 0x0040
230#define CSR16_LOW_TSFTIMER FIELD32(0xffffffff)
231
232/*
233 * CSR17: TSF timer register 1.
234 */
235#define CSR17 0x0044
236#define CSR17_HIGH_TSFTIMER FIELD32(0xffffffff)
237
238/*
239 * CSR18: IFS timer register 0.
240 * SIFS: Sifs, default is 10 us.
241 * PIFS: Pifs, default is 30 us.
242 */
243#define CSR18 0x0048
244#define CSR18_SIFS FIELD32(0x0000ffff)
245#define CSR18_PIFS FIELD32(0xffff0000)
246
247/*
248 * CSR19: IFS timer register 1.
249 * DIFS: Difs, default is 50 us.
250 * EIFS: Eifs, default is 364 us.
251 */
252#define CSR19 0x004c
253#define CSR19_DIFS FIELD32(0x0000ffff)
254#define CSR19_EIFS FIELD32(0xffff0000)
255
256/*
257 * CSR20: Wakeup timer register.
258 * DELAY_AFTER_TBCN: Delay after tbcn expired in units of 1/16 TU.
259 * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
260 * AUTOWAKE: Enable auto wakeup / sleep mechanism.
261 */
262#define CSR20 0x0050
263#define CSR20_DELAY_AFTER_TBCN FIELD32(0x0000ffff)
264#define CSR20_TBCN_BEFORE_WAKEUP FIELD32(0x00ff0000)
265#define CSR20_AUTOWAKE FIELD32(0x01000000)
266
267/*
268 * CSR21: EEPROM control register.
269 * RELOAD: Write 1 to reload eeprom content.
270 * TYPE_93C46: 1: 93c46, 0:93c66.
271 */
272#define CSR21 0x0054
273#define CSR21_RELOAD FIELD32(0x00000001)
274#define CSR21_EEPROM_DATA_CLOCK FIELD32(0x00000002)
275#define CSR21_EEPROM_CHIP_SELECT FIELD32(0x00000004)
276#define CSR21_EEPROM_DATA_IN FIELD32(0x00000008)
277#define CSR21_EEPROM_DATA_OUT FIELD32(0x00000010)
278#define CSR21_TYPE_93C46 FIELD32(0x00000020)
279
280/*
281 * CSR22: CFP control register.
282 * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU.
283 * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain.
284 */
285#define CSR22 0x0058
286#define CSR22_CFP_DURATION_REMAIN FIELD32(0x0000ffff)
287#define CSR22_RELOAD_CFP_DURATION FIELD32(0x00010000)
288
289/*
290 * Transmit related CSRs.
291 * Some values are set in TU, whereas 1 TU == 1024 us.
292 */
293
294/*
295 * TXCSR0: TX Control Register.
296 * KICK_TX: Kick tx ring.
297 * KICK_ATIM: Kick atim ring.
298 * KICK_PRIO: Kick priority ring.
299 * ABORT: Abort all transmit related ring operation.
300 */
301#define TXCSR0 0x0060
302#define TXCSR0_KICK_TX FIELD32(0x00000001)
303#define TXCSR0_KICK_ATIM FIELD32(0x00000002)
304#define TXCSR0_KICK_PRIO FIELD32(0x00000004)
305#define TXCSR0_ABORT FIELD32(0x00000008)
306
307/*
308 * TXCSR1: TX Configuration Register.
309 * ACK_TIMEOUT: Ack timeout, default = sifs + 2*slottime + acktime @ 1mbps.
310 * ACK_CONSUME_TIME: Ack consume time, default = sifs + acktime @ 1mbps.
311 * TSF_OFFSET: Insert tsf offset.
312 * AUTORESPONDER: Enable auto responder which include ack & cts.
313 */
314#define TXCSR1 0x0064
315#define TXCSR1_ACK_TIMEOUT FIELD32(0x000001ff)
316#define TXCSR1_ACK_CONSUME_TIME FIELD32(0x0003fe00)
317#define TXCSR1_TSF_OFFSET FIELD32(0x00fc0000)
318#define TXCSR1_AUTORESPONDER FIELD32(0x01000000)
319
320/*
321 * TXCSR2: Tx descriptor configuration register.
322 * TXD_SIZE: Tx descriptor size, default is 48.
323 * NUM_TXD: Number of tx entries in ring.
324 * NUM_ATIM: Number of atim entries in ring.
325 * NUM_PRIO: Number of priority entries in ring.
326 */
327#define TXCSR2 0x0068
328#define TXCSR2_TXD_SIZE FIELD32(0x000000ff)
329#define TXCSR2_NUM_TXD FIELD32(0x0000ff00)
330#define TXCSR2_NUM_ATIM FIELD32(0x00ff0000)
331#define TXCSR2_NUM_PRIO FIELD32(0xff000000)
332
333/*
334 * TXCSR3: TX Ring Base address register.
335 */
336#define TXCSR3 0x006c
337#define TXCSR3_TX_RING_REGISTER FIELD32(0xffffffff)
338
339/*
340 * TXCSR4: TX Atim Ring Base address register.
341 */
342#define TXCSR4 0x0070
343#define TXCSR4_ATIM_RING_REGISTER FIELD32(0xffffffff)
344
345/*
346 * TXCSR5: TX Prio Ring Base address register.
347 */
348#define TXCSR5 0x0074
349#define TXCSR5_PRIO_RING_REGISTER FIELD32(0xffffffff)
350
351/*
352 * TXCSR6: Beacon Base address register.
353 */
354#define TXCSR6 0x0078
355#define TXCSR6_BEACON_RING_REGISTER FIELD32(0xffffffff)
356
357/*
358 * TXCSR7: Auto responder control register.
359 * AR_POWERMANAGEMENT: Auto responder power management bit.
360 */
361#define TXCSR7 0x007c
362#define TXCSR7_AR_POWERMANAGEMENT FIELD32(0x00000001)
363
364/*
365 * Receive related CSRs.
366 * Some values are set in TU, whereas 1 TU == 1024 us.
367 */
368
369/*
370 * RXCSR0: RX Control Register.
371 * DISABLE_RX: Disable rx engine.
372 * DROP_CRC: Drop crc error.
373 * DROP_PHYSICAL: Drop physical error.
374 * DROP_CONTROL: Drop control frame.
375 * DROP_NOT_TO_ME: Drop not to me unicast frame.
376 * DROP_TODS: Drop frame tods bit is true.
377 * DROP_VERSION_ERROR: Drop version error frame.
378 * PASS_CRC: Pass all packets with crc attached.
379 */
380#define RXCSR0 0x0080
381#define RXCSR0_DISABLE_RX FIELD32(0x00000001)
382#define RXCSR0_DROP_CRC FIELD32(0x00000002)
383#define RXCSR0_DROP_PHYSICAL FIELD32(0x00000004)
384#define RXCSR0_DROP_CONTROL FIELD32(0x00000008)
385#define RXCSR0_DROP_NOT_TO_ME FIELD32(0x00000010)
386#define RXCSR0_DROP_TODS FIELD32(0x00000020)
387#define RXCSR0_DROP_VERSION_ERROR FIELD32(0x00000040)
388#define RXCSR0_PASS_CRC FIELD32(0x00000080)
389
390/*
391 * RXCSR1: RX descriptor configuration register.
392 * RXD_SIZE: Rx descriptor size, default is 32b.
393 * NUM_RXD: Number of rx entries in ring.
394 */
395#define RXCSR1 0x0084
396#define RXCSR1_RXD_SIZE FIELD32(0x000000ff)
397#define RXCSR1_NUM_RXD FIELD32(0x0000ff00)
398
399/*
400 * RXCSR2: RX Ring base address register.
401 */
402#define RXCSR2 0x0088
403#define RXCSR2_RX_RING_REGISTER FIELD32(0xffffffff)
404
405/*
406 * RXCSR3: BBP ID register for Rx operation.
407 * BBP_ID#: BBP register # id.
408 * BBP_ID#_VALID: BBP register # id is valid or not.
409 */
410#define RXCSR3 0x0090
411#define RXCSR3_BBP_ID0 FIELD32(0x0000007f)
412#define RXCSR3_BBP_ID0_VALID FIELD32(0x00000080)
413#define RXCSR3_BBP_ID1 FIELD32(0x00007f00)
414#define RXCSR3_BBP_ID1_VALID FIELD32(0x00008000)
415#define RXCSR3_BBP_ID2 FIELD32(0x007f0000)
416#define RXCSR3_BBP_ID2_VALID FIELD32(0x00800000)
417#define RXCSR3_BBP_ID3 FIELD32(0x7f000000)
418#define RXCSR3_BBP_ID3_VALID FIELD32(0x80000000)
419
420/*
421 * RXCSR4: BBP ID register for Rx operation.
422 * BBP_ID#: BBP register # id.
423 * BBP_ID#_VALID: BBP register # id is valid or not.
424 */
425#define RXCSR4 0x0094
426#define RXCSR4_BBP_ID4 FIELD32(0x0000007f)
427#define RXCSR4_BBP_ID4_VALID FIELD32(0x00000080)
428#define RXCSR4_BBP_ID5 FIELD32(0x00007f00)
429#define RXCSR4_BBP_ID5_VALID FIELD32(0x00008000)
430
431/*
432 * ARCSR0: Auto Responder PLCP config register 0.
433 * ARCSR0_AR_BBP_DATA#: Auto responder BBP register # data.
434 * ARCSR0_AR_BBP_ID#: Auto responder BBP register # Id.
435 */
436#define ARCSR0 0x0098
437#define ARCSR0_AR_BBP_DATA0 FIELD32(0x000000ff)
438#define ARCSR0_AR_BBP_ID0 FIELD32(0x0000ff00)
439#define ARCSR0_AR_BBP_DATA1 FIELD32(0x00ff0000)
440#define ARCSR0_AR_BBP_ID1 FIELD32(0xff000000)
441
442/*
443 * ARCSR1: Auto Responder PLCP config register 1.
444 * ARCSR0_AR_BBP_DATA#: Auto responder BBP register # data.
445 * ARCSR0_AR_BBP_ID#: Auto responder BBP register # Id.
446 */
447#define ARCSR1 0x009c
448#define ARCSR1_AR_BBP_DATA2 FIELD32(0x000000ff)
449#define ARCSR1_AR_BBP_ID2 FIELD32(0x0000ff00)
450#define ARCSR1_AR_BBP_DATA3 FIELD32(0x00ff0000)
451#define ARCSR1_AR_BBP_ID3 FIELD32(0xff000000)
452
453/*
454 * Miscellaneous Registers.
455 * Some values are set in TU, whereas 1 TU == 1024 us.
456 */
457
458/*
459 * PCICSR: PCI control register.
460 * BIG_ENDIAN: 1: big endian, 0: little endian.
461 * RX_TRESHOLD: Rx threshold in dw to start pci access
462 * 0: 16dw (default), 1: 8dw, 2: 4dw, 3: 32dw.
463 * TX_TRESHOLD: Tx threshold in dw to start pci access
464 * 0: 0dw (default), 1: 1dw, 2: 4dw, 3: forward.
465 * BURST_LENTH: Pci burst length 0: 4dw (default, 1: 8dw, 2: 16dw, 3:32dw.
466 * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational.
467 */
468#define PCICSR 0x008c
469#define PCICSR_BIG_ENDIAN FIELD32(0x00000001)
470#define PCICSR_RX_TRESHOLD FIELD32(0x00000006)
471#define PCICSR_TX_TRESHOLD FIELD32(0x00000018)
472#define PCICSR_BURST_LENTH FIELD32(0x00000060)
473#define PCICSR_ENABLE_CLK FIELD32(0x00000080)
474
475/*
476 * CNT0: FCS error count.
477 * FCS_ERROR: FCS error count, cleared when read.
478 */
479#define CNT0 0x00a0
480#define CNT0_FCS_ERROR FIELD32(0x0000ffff)
481
482/*
483 * Statistic Register.
484 * CNT1: PLCP error count.
485 * CNT2: Long error count.
486 * CNT3: CCA false alarm count.
487 * CNT4: Rx FIFO overflow count.
488 * CNT5: Tx FIFO underrun count.
489 */
490#define TIMECSR2 0x00a8
491#define CNT1 0x00ac
492#define CNT2 0x00b0
493#define TIMECSR3 0x00b4
494#define CNT3 0x00b8
495#define CNT4 0x00bc
496#define CNT5 0x00c0
497
498/*
499 * Baseband Control Register.
500 */
501
502/*
503 * PWRCSR0: Power mode configuration register.
504 */
505#define PWRCSR0 0x00c4
506
507/*
508 * Power state transition time registers.
509 */
510#define PSCSR0 0x00c8
511#define PSCSR1 0x00cc
512#define PSCSR2 0x00d0
513#define PSCSR3 0x00d4
514
515/*
516 * PWRCSR1: Manual power control / status register.
517 * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake.
518 * SET_STATE: Set state. Write 1 to trigger, self cleared.
519 * BBP_DESIRE_STATE: BBP desired state.
520 * RF_DESIRE_STATE: RF desired state.
521 * BBP_CURR_STATE: BBP current state.
522 * RF_CURR_STATE: RF current state.
523 * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared.
524 */
525#define PWRCSR1 0x00d8
526#define PWRCSR1_SET_STATE FIELD32(0x00000001)
527#define PWRCSR1_BBP_DESIRE_STATE FIELD32(0x00000006)
528#define PWRCSR1_RF_DESIRE_STATE FIELD32(0x00000018)
529#define PWRCSR1_BBP_CURR_STATE FIELD32(0x00000060)
530#define PWRCSR1_RF_CURR_STATE FIELD32(0x00000180)
531#define PWRCSR1_PUT_TO_SLEEP FIELD32(0x00000200)
532
533/*
534 * TIMECSR: Timer control register.
535 * US_COUNT: 1 us timer count in units of clock cycles.
536 * US_64_COUNT: 64 us timer count in units of 1 us timer.
537 * BEACON_EXPECT: Beacon expect window.
538 */
539#define TIMECSR 0x00dc
540#define TIMECSR_US_COUNT FIELD32(0x000000ff)
541#define TIMECSR_US_64_COUNT FIELD32(0x0000ff00)
542#define TIMECSR_BEACON_EXPECT FIELD32(0x00070000)
543
544/*
545 * MACCSR0: MAC configuration register 0.
546 */
547#define MACCSR0 0x00e0
548
549/*
550 * MACCSR1: MAC configuration register 1.
551 * KICK_RX: Kick one-shot rx in one-shot rx mode.
552 * ONESHOT_RXMODE: Enable one-shot rx mode for debugging.
553 * BBPRX_RESET_MODE: Ralink bbp rx reset mode.
554 * AUTO_TXBBP: Auto tx logic access bbp control register.
555 * AUTO_RXBBP: Auto rx logic access bbp control register.
556 * LOOPBACK: Loopback mode. 0: normal, 1: internal, 2: external, 3:rsvd.
557 * INTERSIL_IF: Intersil if calibration pin.
558 */
559#define MACCSR1 0x00e4
560#define MACCSR1_KICK_RX FIELD32(0x00000001)
561#define MACCSR1_ONESHOT_RXMODE FIELD32(0x00000002)
562#define MACCSR1_BBPRX_RESET_MODE FIELD32(0x00000004)
563#define MACCSR1_AUTO_TXBBP FIELD32(0x00000008)
564#define MACCSR1_AUTO_RXBBP FIELD32(0x00000010)
565#define MACCSR1_LOOPBACK FIELD32(0x00000060)
566#define MACCSR1_INTERSIL_IF FIELD32(0x00000080)
567
568/*
569 * RALINKCSR: Ralink Rx auto-reset BBCR.
570 * AR_BBP_DATA#: Auto reset BBP register # data.
571 * AR_BBP_ID#: Auto reset BBP register # id.
572 */
573#define RALINKCSR 0x00e8
574#define RALINKCSR_AR_BBP_DATA0 FIELD32(0x000000ff)
575#define RALINKCSR_AR_BBP_ID0 FIELD32(0x0000ff00)
576#define RALINKCSR_AR_BBP_DATA1 FIELD32(0x00ff0000)
577#define RALINKCSR_AR_BBP_ID1 FIELD32(0xff000000)
578
579/*
580 * BCNCSR: Beacon interval control register.
581 * CHANGE: Write one to change beacon interval.
582 * DELTATIME: The delta time value.
583 * NUM_BEACON: Number of beacon according to mode.
584 * MODE: Please refer to asic specs.
585 * PLUS: Plus or minus delta time value.
586 */
587#define BCNCSR 0x00ec
588#define BCNCSR_CHANGE FIELD32(0x00000001)
589#define BCNCSR_DELTATIME FIELD32(0x0000001e)
590#define BCNCSR_NUM_BEACON FIELD32(0x00001fe0)
591#define BCNCSR_MODE FIELD32(0x00006000)
592#define BCNCSR_PLUS FIELD32(0x00008000)
593
594/*
595 * BBP / RF / IF Control Register.
596 */
597
598/*
599 * BBPCSR: BBP serial control register.
600 * VALUE: Register value to program into BBP.
601 * REGNUM: Selected BBP register.
602 * BUSY: 1: asic is busy execute BBP programming.
603 * WRITE_CONTROL: 1: write BBP, 0: read BBP.
604 */
605#define BBPCSR 0x00f0
606#define BBPCSR_VALUE FIELD32(0x000000ff)
607#define BBPCSR_REGNUM FIELD32(0x00007f00)
608#define BBPCSR_BUSY FIELD32(0x00008000)
609#define BBPCSR_WRITE_CONTROL FIELD32(0x00010000)
610
611/*
612 * RFCSR: RF serial control register.
613 * VALUE: Register value + id to program into rf/if.
614 * NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22).
615 * IF_SELECT: Chip to program: 0: rf, 1: if.
616 * PLL_LD: Rf pll_ld status.
617 * BUSY: 1: asic is busy execute rf programming.
618 */
619#define RFCSR 0x00f4
620#define RFCSR_VALUE FIELD32(0x00ffffff)
621#define RFCSR_NUMBER_OF_BITS FIELD32(0x1f000000)
622#define RFCSR_IF_SELECT FIELD32(0x20000000)
623#define RFCSR_PLL_LD FIELD32(0x40000000)
624#define RFCSR_BUSY FIELD32(0x80000000)
625
626/*
627 * LEDCSR: LED control register.
628 * ON_PERIOD: On period, default 70ms.
629 * OFF_PERIOD: Off period, default 30ms.
630 * LINK: 0: linkoff, 1: linkup.
631 * ACTIVITY: 0: idle, 1: active.
632 */
633#define LEDCSR 0x00f8
634#define LEDCSR_ON_PERIOD FIELD32(0x000000ff)
635#define LEDCSR_OFF_PERIOD FIELD32(0x0000ff00)
636#define LEDCSR_LINK FIELD32(0x00010000)
637#define LEDCSR_ACTIVITY FIELD32(0x00020000)
638
639/*
640 * ASIC pointer information.
641 * RXPTR: Current RX ring address.
642 * TXPTR: Current Tx ring address.
643 * PRIPTR: Current Priority ring address.
644 * ATIMPTR: Current ATIM ring address.
645 */
646#define RXPTR 0x0100
647#define TXPTR 0x0104
648#define PRIPTR 0x0108
649#define ATIMPTR 0x010c
650
651/*
652 * GPIO and others.
653 */
654
655/*
656 * GPIOCSR: GPIO control register.
657 */
658#define GPIOCSR 0x0120
659#define GPIOCSR_BIT0 FIELD32(0x00000001)
660#define GPIOCSR_BIT1 FIELD32(0x00000002)
661#define GPIOCSR_BIT2 FIELD32(0x00000004)
662#define GPIOCSR_BIT3 FIELD32(0x00000008)
663#define GPIOCSR_BIT4 FIELD32(0x00000010)
664#define GPIOCSR_BIT5 FIELD32(0x00000020)
665#define GPIOCSR_BIT6 FIELD32(0x00000040)
666#define GPIOCSR_BIT7 FIELD32(0x00000080)
667
668/*
669 * BBPPCSR: BBP Pin control register.
670 */
671#define BBPPCSR 0x0124
672
673/*
674 * BCNCSR1: Tx BEACON offset time control register.
675 * PRELOAD: Beacon timer offset in units of usec.
676 */
677#define BCNCSR1 0x0130
678#define BCNCSR1_PRELOAD FIELD32(0x0000ffff)
679
680/*
681 * MACCSR2: TX_PE to RX_PE turn-around time control register
682 * DELAY: RX_PE low width, in units of pci clock cycle.
683 */
684#define MACCSR2 0x0134
685#define MACCSR2_DELAY FIELD32(0x000000ff)
686
687/*
688 * ARCSR2: 1 Mbps ACK/CTS PLCP.
689 */
690#define ARCSR2 0x013c
691#define ARCSR2_SIGNAL FIELD32(0x000000ff)
692#define ARCSR2_SERVICE FIELD32(0x0000ff00)
693#define ARCSR2_LENGTH_LOW FIELD32(0x00ff0000)
694#define ARCSR2_LENGTH FIELD32(0xffff0000)
695
696/*
697 * ARCSR3: 2 Mbps ACK/CTS PLCP.
698 */
699#define ARCSR3 0x0140
700#define ARCSR3_SIGNAL FIELD32(0x000000ff)
701#define ARCSR3_SERVICE FIELD32(0x0000ff00)
702#define ARCSR3_LENGTH FIELD32(0xffff0000)
703
704/*
705 * ARCSR4: 5.5 Mbps ACK/CTS PLCP.
706 */
707#define ARCSR4 0x0144
708#define ARCSR4_SIGNAL FIELD32(0x000000ff)
709#define ARCSR4_SERVICE FIELD32(0x0000ff00)
710#define ARCSR4_LENGTH FIELD32(0xffff0000)
711
712/*
713 * ARCSR5: 11 Mbps ACK/CTS PLCP.
714 */
715#define ARCSR5 0x0148
716#define ARCSR5_SIGNAL FIELD32(0x000000ff)
717#define ARCSR5_SERVICE FIELD32(0x0000ff00)
718#define ARCSR5_LENGTH FIELD32(0xffff0000)
719
720/*
721 * BBP registers.
722 * The wordsize of the BBP is 8 bits.
723 */
724
725/*
726 * R1: TX antenna control
727 */
728#define BBP_R1_TX_ANTENNA FIELD8(0x03)
729
730/*
731 * R4: RX antenna control
732 */
733#define BBP_R4_RX_ANTENNA FIELD8(0x06)
734
735/*
736 * RF registers
737 */
738
739/*
740 * RF 1
741 */
742#define RF1_TUNER FIELD32(0x00020000)
743
744/*
745 * RF 3
746 */
747#define RF3_TUNER FIELD32(0x00000100)
748#define RF3_TXPOWER FIELD32(0x00003e00)
749
750/*
751 * EEPROM content.
752 * The wordsize of the EEPROM is 16 bits.
753 */
754
755/*
756 * HW MAC address.
757 */
758#define EEPROM_MAC_ADDR_0 0x0002
759#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
760#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
761#define EEPROM_MAC_ADDR1 0x0003
762#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
763#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
764#define EEPROM_MAC_ADDR_2 0x0004
765#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
766#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
767
768/*
769 * EEPROM antenna.
770 * ANTENNA_NUM: Number of antenna's.
771 * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
772 * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
773 * RF_TYPE: Rf_type of this adapter.
774 * LED_MODE: 0: default, 1: TX/RX activity,2: Single (ignore link), 3: rsvd.
775 * RX_AGCVGC: 0: disable, 1:enable BBP R13 tuning.
776 * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
777 */
778#define EEPROM_ANTENNA 0x0b
779#define EEPROM_ANTENNA_NUM FIELD16(0x0003)
780#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
781#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
782#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0040)
783#define EEPROM_ANTENNA_LED_MODE FIELD16(0x0180)
784#define EEPROM_ANTENNA_RX_AGCVGC_TUNING FIELD16(0x0200)
785#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
786
787/*
788 * EEPROM BBP.
789 */
790#define EEPROM_BBP_START 0x0c
791#define EEPROM_BBP_SIZE 7
792#define EEPROM_BBP_VALUE FIELD16(0x00ff)
793#define EEPROM_BBP_REG_ID FIELD16(0xff00)
794
795/*
796 * EEPROM TXPOWER
797 */
798#define EEPROM_TXPOWER_START 0x13
799#define EEPROM_TXPOWER_SIZE 7
800#define EEPROM_TXPOWER_1 FIELD16(0x00ff)
801#define EEPROM_TXPOWER_2 FIELD16(0xff00)
802
803/*
804 * DMA descriptor defines.
805 */
806#define TXD_DESC_SIZE ( 8 * sizeof(struct data_desc) )
807#define RXD_DESC_SIZE ( 8 * sizeof(struct data_desc) )
808
809/*
810 * TX descriptor format for TX, PRIO, ATIM and Beacon Ring.
811 */
812
813/*
814 * Word0
815 */
816#define TXD_W0_OWNER_NIC FIELD32(0x00000001)
817#define TXD_W0_VALID FIELD32(0x00000002)
818#define TXD_W0_RESULT FIELD32(0x0000001c)
819#define TXD_W0_RETRY_COUNT FIELD32(0x000000e0)
820#define TXD_W0_MORE_FRAG FIELD32(0x00000100)
821#define TXD_W0_ACK FIELD32(0x00000200)
822#define TXD_W0_TIMESTAMP FIELD32(0x00000400)
823#define TXD_W0_RTS FIELD32(0x00000800)
824#define TXD_W0_IFS FIELD32(0x00006000)
825#define TXD_W0_RETRY_MODE FIELD32(0x00008000)
826#define TXD_W0_AGC FIELD32(0x00ff0000)
827#define TXD_W0_R2 FIELD32(0xff000000)
828
829/*
830 * Word1
831 */
832#define TXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff)
833
834/*
835 * Word2
836 */
837#define TXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff)
838#define TXD_W2_DATABYTE_COUNT FIELD32(0xffff0000)
839
840/*
841 * Word3 & 4: PLCP information
842 */
843#define TXD_W3_PLCP_SIGNAL FIELD32(0x0000ffff)
844#define TXD_W3_PLCP_SERVICE FIELD32(0xffff0000)
845#define TXD_W4_PLCP_LENGTH_LOW FIELD32(0x0000ffff)
846#define TXD_W4_PLCP_LENGTH_HIGH FIELD32(0xffff0000)
847
848/*
849 * Word5
850 */
851#define TXD_W5_BBCR4 FIELD32(0x0000ffff)
852#define TXD_W5_AGC_REG FIELD32(0x007f0000)
853#define TXD_W5_AGC_REG_VALID FIELD32(0x00800000)
854#define TXD_W5_XXX_REG FIELD32(0x7f000000)
855#define TXD_W5_XXX_REG_VALID FIELD32(0x80000000)
856
857/*
858 * Word6
859 */
860#define TXD_W6_SK_BUFF FIELD32(0xffffffff)
861
862/*
863 * Word7
864 */
865#define TXD_W7_RESERVED FIELD32(0xffffffff)
866
867/*
868 * RX descriptor format for RX Ring.
869 */
870
871/*
872 * Word0
873 */
874#define RXD_W0_OWNER_NIC FIELD32(0x00000001)
875#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002)
876#define RXD_W0_MULTICAST FIELD32(0x00000004)
877#define RXD_W0_BROADCAST FIELD32(0x00000008)
878#define RXD_W0_MY_BSS FIELD32(0x00000010)
879#define RXD_W0_CRC_ERROR FIELD32(0x00000020)
880#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080)
881#define RXD_W0_DATABYTE_COUNT FIELD32(0xffff0000)
882
883/*
884 * Word1
885 */
886#define RXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff)
887
888/*
889 * Word2
890 */
891#define RXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff)
892#define RXD_W2_SIGNAL FIELD32(0x00ff0000)
893#define RXD_W2_RSSI FIELD32(0xff000000)
894
895/*
896 * Word3
897 */
898#define RXD_W3_BBR2 FIELD32(0x000000ff)
899#define RXD_W3_BBR3 FIELD32(0x0000ff00)
900#define RXD_W3_BBR4 FIELD32(0x00ff0000)
901#define RXD_W3_BBR5 FIELD32(0xff000000)
902
903/*
904 * Word4
905 */
906#define RXD_W4_RX_END_TIME FIELD32(0xffffffff)
907
908/*
909 * Word5 & 6 & 7: Reserved
910 */
911#define RXD_W5_RESERVED FIELD32(0xffffffff)
912#define RXD_W6_RESERVED FIELD32(0xffffffff)
913#define RXD_W7_RESERVED FIELD32(0xffffffff)
914
915/*
916 * Macro's for converting txpower from EEPROM to dscape value
917 * and from dscape value to register value.
918 * NOTE: Logics in rt2400pci for txpower are reversed
919 * compared to the other rt2x00 drivers. A higher txpower
920 * value means that the txpower must be lowered. This is
921 * important when converting the value coming from the
922 * dscape stack to the rt2400 acceptable value.
923 */
924#define MIN_TXPOWER 31
925#define MAX_TXPOWER 62
926#define DEFAULT_TXPOWER 39
927
928#define TXPOWER_FROM_DEV(__txpower) \
929({ \
930 ((__txpower) > MAX_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \
931 ((__txpower) < MIN_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \
932 (((__txpower) - MAX_TXPOWER) + MIN_TXPOWER); \
933})
934
935#define TXPOWER_TO_DEV(__txpower) \
936({ \
937 (__txpower) += MIN_TXPOWER; \
938 ((__txpower) <= MIN_TXPOWER) ? MAX_TXPOWER : \
939 (((__txpower) >= MAX_TXPOWER) ? MIN_TXPOWER : \
940 (MAX_TXPOWER - ((__txpower) - MIN_TXPOWER))); \
941})
942
943#endif /* RT2400PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
new file mode 100644
index 000000000000..f6115c626fa7
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -0,0 +1,2000 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2500pci
23 Abstract: rt2500pci device specific routines.
24 Supported chipsets: RT2560.
25 */
26
27/*
28 * Set enviroment defines for rt2x00.h
29 */
30#define DRV_NAME "rt2500pci"
31
32#include <linux/delay.h>
33#include <linux/etherdevice.h>
34#include <linux/init.h>
35#include <linux/kernel.h>
36#include <linux/module.h>
37#include <linux/pci.h>
38#include <linux/eeprom_93cx6.h>
39
40#include "rt2x00.h"
41#include "rt2x00pci.h"
42#include "rt2500pci.h"
43
44/*
45 * Register access.
46 * All access to the CSR registers will go through the methods
47 * rt2x00pci_register_read and rt2x00pci_register_write.
48 * BBP and RF register require indirect register access,
49 * and use the CSR registers BBPCSR and RFCSR to achieve this.
50 * These indirect registers work with busy bits,
51 * and we will try maximal REGISTER_BUSY_COUNT times to access
52 * the register while taking a REGISTER_BUSY_DELAY us delay
53 * between each attampt. When the busy bit is still set at that time,
54 * the access attempt is considered to have failed,
55 * and we will print an error.
56 */
57static u32 rt2500pci_bbp_check(const struct rt2x00_dev *rt2x00dev)
58{
59 u32 reg;
60 unsigned int i;
61
62 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
63 rt2x00pci_register_read(rt2x00dev, BBPCSR, &reg);
64 if (!rt2x00_get_field32(reg, BBPCSR_BUSY))
65 break;
66 udelay(REGISTER_BUSY_DELAY);
67 }
68
69 return reg;
70}
71
72static void rt2500pci_bbp_write(const struct rt2x00_dev *rt2x00dev,
73 const unsigned int word, const u8 value)
74{
75 u32 reg;
76
77 /*
78 * Wait until the BBP becomes ready.
79 */
80 reg = rt2500pci_bbp_check(rt2x00dev);
81 if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
82 ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n");
83 return;
84 }
85
86 /*
87 * Write the data into the BBP.
88 */
89 reg = 0;
90 rt2x00_set_field32(&reg, BBPCSR_VALUE, value);
91 rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
92 rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
93 rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 1);
94
95 rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
96}
97
98static void rt2500pci_bbp_read(const struct rt2x00_dev *rt2x00dev,
99 const unsigned int word, u8 *value)
100{
101 u32 reg;
102
103 /*
104 * Wait until the BBP becomes ready.
105 */
106 reg = rt2500pci_bbp_check(rt2x00dev);
107 if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
108 ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
109 return;
110 }
111
112 /*
113 * Write the request into the BBP.
114 */
115 reg = 0;
116 rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
117 rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
118 rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 0);
119
120 rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
121
122 /*
123 * Wait until the BBP becomes ready.
124 */
125 reg = rt2500pci_bbp_check(rt2x00dev);
126 if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
127 ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
128 *value = 0xff;
129 return;
130 }
131
132 *value = rt2x00_get_field32(reg, BBPCSR_VALUE);
133}
134
135static void rt2500pci_rf_write(const struct rt2x00_dev *rt2x00dev,
136 const unsigned int word, const u32 value)
137{
138 u32 reg;
139 unsigned int i;
140
141 if (!word)
142 return;
143
144 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
145 rt2x00pci_register_read(rt2x00dev, RFCSR, &reg);
146 if (!rt2x00_get_field32(reg, RFCSR_BUSY))
147 goto rf_write;
148 udelay(REGISTER_BUSY_DELAY);
149 }
150
151 ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n");
152 return;
153
154rf_write:
155 reg = 0;
156 rt2x00_set_field32(&reg, RFCSR_VALUE, value);
157 rt2x00_set_field32(&reg, RFCSR_NUMBER_OF_BITS, 20);
158 rt2x00_set_field32(&reg, RFCSR_IF_SELECT, 0);
159 rt2x00_set_field32(&reg, RFCSR_BUSY, 1);
160
161 rt2x00pci_register_write(rt2x00dev, RFCSR, reg);
162 rt2x00_rf_write(rt2x00dev, word, value);
163}
164
165static void rt2500pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
166{
167 struct rt2x00_dev *rt2x00dev = eeprom->data;
168 u32 reg;
169
170 rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
171
172 eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN);
173 eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT);
174 eeprom->reg_data_clock =
175 !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK);
176 eeprom->reg_chip_select =
177 !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT);
178}
179
180static void rt2500pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
181{
182 struct rt2x00_dev *rt2x00dev = eeprom->data;
183 u32 reg = 0;
184
185 rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in);
186 rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out);
187 rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_CLOCK,
188 !!eeprom->reg_data_clock);
189 rt2x00_set_field32(&reg, CSR21_EEPROM_CHIP_SELECT,
190 !!eeprom->reg_chip_select);
191
192 rt2x00pci_register_write(rt2x00dev, CSR21, reg);
193}
194
195#ifdef CONFIG_RT2X00_LIB_DEBUGFS
196#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
197
198static void rt2500pci_read_csr(const struct rt2x00_dev *rt2x00dev,
199 const unsigned int word, u32 *data)
200{
201 rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data);
202}
203
204static void rt2500pci_write_csr(const struct rt2x00_dev *rt2x00dev,
205 const unsigned int word, u32 data)
206{
207 rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data);
208}
209
210static const struct rt2x00debug rt2500pci_rt2x00debug = {
211 .owner = THIS_MODULE,
212 .csr = {
213 .read = rt2500pci_read_csr,
214 .write = rt2500pci_write_csr,
215 .word_size = sizeof(u32),
216 .word_count = CSR_REG_SIZE / sizeof(u32),
217 },
218 .eeprom = {
219 .read = rt2x00_eeprom_read,
220 .write = rt2x00_eeprom_write,
221 .word_size = sizeof(u16),
222 .word_count = EEPROM_SIZE / sizeof(u16),
223 },
224 .bbp = {
225 .read = rt2500pci_bbp_read,
226 .write = rt2500pci_bbp_write,
227 .word_size = sizeof(u8),
228 .word_count = BBP_SIZE / sizeof(u8),
229 },
230 .rf = {
231 .read = rt2x00_rf_read,
232 .write = rt2500pci_rf_write,
233 .word_size = sizeof(u32),
234 .word_count = RF_SIZE / sizeof(u32),
235 },
236};
237#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
238
239#ifdef CONFIG_RT2500PCI_RFKILL
240static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
241{
242 u32 reg;
243
244 rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
245 return rt2x00_get_field32(reg, GPIOCSR_BIT0);
246}
247#endif /* CONFIG_RT2400PCI_RFKILL */
248
249/*
250 * Configuration handlers.
251 */
252static void rt2500pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr)
253{
254 __le32 reg[2];
255
256 memset(&reg, 0, sizeof(reg));
257 memcpy(&reg, addr, ETH_ALEN);
258
259 /*
260 * The MAC address is passed to us as an array of bytes,
261 * that array is little endian, so no need for byte ordering.
262 */
263 rt2x00pci_register_multiwrite(rt2x00dev, CSR3, &reg, sizeof(reg));
264}
265
266static void rt2500pci_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
267{
268 __le32 reg[2];
269
270 memset(&reg, 0, sizeof(reg));
271 memcpy(&reg, bssid, ETH_ALEN);
272
273 /*
274 * The BSSID is passed to us as an array of bytes,
275 * that array is little endian, so no need for byte ordering.
276 */
277 rt2x00pci_register_multiwrite(rt2x00dev, CSR5, &reg, sizeof(reg));
278}
279
280static void rt2500pci_config_packet_filter(struct rt2x00_dev *rt2x00dev,
281 const unsigned int filter)
282{
283 int promisc = !!(filter & IFF_PROMISC);
284 int multicast = !!(filter & IFF_MULTICAST);
285 int broadcast = !!(filter & IFF_BROADCAST);
286 u32 reg;
287
288 rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
289 rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME, !promisc);
290 rt2x00_set_field32(&reg, RXCSR0_DROP_MCAST, !multicast);
291 rt2x00_set_field32(&reg, RXCSR0_DROP_BCAST, !broadcast);
292 rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
293}
294
295static void rt2500pci_config_type(struct rt2x00_dev *rt2x00dev, const int type)
296{
297 u32 reg;
298
299 rt2x00pci_register_write(rt2x00dev, CSR14, 0);
300
301 /*
302 * Apply hardware packet filter.
303 */
304 rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
305
306 if (!is_monitor_present(&rt2x00dev->interface) &&
307 (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
308 rt2x00_set_field32(&reg, RXCSR0_DROP_TODS, 1);
309 else
310 rt2x00_set_field32(&reg, RXCSR0_DROP_TODS, 0);
311
312 /*
313 * If there is a non-monitor interface present
314 * the packet should be strict (even if a monitor interface is present!).
315 * When there is only 1 interface present which is in monitor mode
316 * we should start accepting _all_ frames.
317 */
318 if (is_interface_present(&rt2x00dev->interface)) {
319 rt2x00_set_field32(&reg, RXCSR0_DROP_CRC, 1);
320 rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL, 1);
321 rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL, 1);
322 rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
323 } else if (is_monitor_present(&rt2x00dev->interface)) {
324 rt2x00_set_field32(&reg, RXCSR0_DROP_CRC, 0);
325 rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL, 0);
326 rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL, 0);
327 rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 0);
328 }
329
330 rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
331
332 /*
333 * Enable beacon config
334 */
335 rt2x00pci_register_read(rt2x00dev, BCNCSR1, &reg);
336 rt2x00_set_field32(&reg, BCNCSR1_PRELOAD,
337 PREAMBLE + get_duration(IEEE80211_HEADER, 2));
338 rt2x00_set_field32(&reg, BCNCSR1_BEACON_CWMIN,
339 rt2x00lib_get_ring(rt2x00dev,
340 IEEE80211_TX_QUEUE_BEACON)
341 ->tx_params.cw_min);
342 rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg);
343
344 /*
345 * Enable synchronisation.
346 */
347 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
348 if (is_interface_present(&rt2x00dev->interface)) {
349 rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
350 rt2x00_set_field32(&reg, CSR14_TBCN, 1);
351 }
352
353 rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
354 if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
355 rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 2);
356 else if (type == IEEE80211_IF_TYPE_STA)
357 rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 1);
358 else if (is_monitor_present(&rt2x00dev->interface) &&
359 !is_interface_present(&rt2x00dev->interface))
360 rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 0);
361
362 rt2x00pci_register_write(rt2x00dev, CSR14, reg);
363}
364
365static void rt2500pci_config_rate(struct rt2x00_dev *rt2x00dev, const int rate)
366{
367 struct ieee80211_conf *conf = &rt2x00dev->hw->conf;
368 u32 reg;
369 u32 preamble;
370 u16 value;
371
372 if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE))
373 preamble = SHORT_PREAMBLE;
374 else
375 preamble = PREAMBLE;
376
377 reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK;
378 rt2x00pci_register_write(rt2x00dev, ARCSR1, reg);
379
380 rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
381 value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ?
382 SHORT_DIFS : DIFS) +
383 PLCP + preamble + get_duration(ACK_SIZE, 10);
384 rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, value);
385 value = SIFS + PLCP + preamble + get_duration(ACK_SIZE, 10);
386 rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME, value);
387 rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
388
389 preamble = DEVICE_GET_RATE_FIELD(rate, PREAMBLE) ? 0x08 : 0x00;
390
391 rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
392 rt2x00_set_field32(&reg, ARCSR2_SIGNAL, 0x00 | preamble);
393 rt2x00_set_field32(&reg, ARCSR2_SERVICE, 0x04);
394 rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10));
395 rt2x00pci_register_write(rt2x00dev, ARCSR2, reg);
396
397 rt2x00pci_register_read(rt2x00dev, ARCSR3, &reg);
398 rt2x00_set_field32(&reg, ARCSR3_SIGNAL, 0x01 | preamble);
399 rt2x00_set_field32(&reg, ARCSR3_SERVICE, 0x04);
400 rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20));
401 rt2x00pci_register_write(rt2x00dev, ARCSR3, reg);
402
403 rt2x00pci_register_read(rt2x00dev, ARCSR4, &reg);
404 rt2x00_set_field32(&reg, ARCSR4_SIGNAL, 0x02 | preamble);
405 rt2x00_set_field32(&reg, ARCSR4_SERVICE, 0x04);
406 rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55));
407 rt2x00pci_register_write(rt2x00dev, ARCSR4, reg);
408
409 rt2x00pci_register_read(rt2x00dev, ARCSR5, &reg);
410 rt2x00_set_field32(&reg, ARCSR5_SIGNAL, 0x03 | preamble);
411 rt2x00_set_field32(&reg, ARCSR5_SERVICE, 0x84);
412 rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110));
413 rt2x00pci_register_write(rt2x00dev, ARCSR5, reg);
414}
415
416static void rt2500pci_config_phymode(struct rt2x00_dev *rt2x00dev,
417 const int phymode)
418{
419 struct ieee80211_hw_mode *mode;
420 struct ieee80211_rate *rate;
421
422 if (phymode == MODE_IEEE80211A)
423 rt2x00dev->curr_hwmode = HWMODE_A;
424 else if (phymode == MODE_IEEE80211B)
425 rt2x00dev->curr_hwmode = HWMODE_B;
426 else
427 rt2x00dev->curr_hwmode = HWMODE_G;
428
429 mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
430 rate = &mode->rates[mode->num_rates - 1];
431
432 rt2500pci_config_rate(rt2x00dev, rate->val2);
433}
434
435static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev,
436 const int index, const int channel,
437 const int txpower)
438{
439 struct rf_channel reg;
440 u8 r70;
441
442 /*
443 * Fill rf_reg structure.
444 */
445 memcpy(&reg, &rt2x00dev->spec.channels[index], sizeof(reg));
446
447 /*
448 * Set TXpower.
449 */
450 rt2x00_set_field32(&reg.rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
451
452 /*
453 * Switch on tuning bits.
454 * For RT2523 devices we do not need to update the R1 register.
455 */
456 if (!rt2x00_rf(&rt2x00dev->chip, RF2523))
457 rt2x00_set_field32(&reg.rf1, RF1_TUNER, 1);
458 rt2x00_set_field32(&reg.rf3, RF3_TUNER, 1);
459
460 /*
461 * For RT2525 we should first set the channel to half band higher.
462 */
463 if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
464 static const u32 vals[] = {
465 0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a,
466 0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a,
467 0x00080d1e, 0x00080d22, 0x00080d26, 0x00080d2a,
468 0x00080d2e, 0x00080d3a
469 };
470
471 rt2500pci_rf_write(rt2x00dev, 1, reg.rf1);
472 rt2500pci_rf_write(rt2x00dev, 2, vals[channel - 1]);
473 rt2500pci_rf_write(rt2x00dev, 3, reg.rf3);
474 if (reg.rf4)
475 rt2500pci_rf_write(rt2x00dev, 4, reg.rf4);
476 }
477
478 rt2500pci_rf_write(rt2x00dev, 1, reg.rf1);
479 rt2500pci_rf_write(rt2x00dev, 2, reg.rf2);
480 rt2500pci_rf_write(rt2x00dev, 3, reg.rf3);
481 if (reg.rf4)
482 rt2500pci_rf_write(rt2x00dev, 4, reg.rf4);
483
484 /*
485 * Channel 14 requires the Japan filter bit to be set.
486 */
487 r70 = 0x46;
488 rt2x00_set_field8(&r70, BBP_R70_JAPAN_FILTER, channel == 14);
489 rt2500pci_bbp_write(rt2x00dev, 70, r70);
490
491 msleep(1);
492
493 /*
494 * Switch off tuning bits.
495 * For RT2523 devices we do not need to update the R1 register.
496 */
497 if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) {
498 rt2x00_set_field32(&reg.rf1, RF1_TUNER, 0);
499 rt2500pci_rf_write(rt2x00dev, 1, reg.rf1);
500 }
501
502 rt2x00_set_field32(&reg.rf3, RF3_TUNER, 0);
503 rt2500pci_rf_write(rt2x00dev, 3, reg.rf3);
504
505 /*
506 * Clear false CRC during channel switch.
507 */
508 rt2x00pci_register_read(rt2x00dev, CNT0, &reg.rf1);
509}
510
511static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev,
512 const int txpower)
513{
514 u32 rf3;
515
516 rt2x00_rf_read(rt2x00dev, 3, &rf3);
517 rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
518 rt2500pci_rf_write(rt2x00dev, 3, rf3);
519}
520
521static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev,
522 const int antenna_tx, const int antenna_rx)
523{
524 u32 reg;
525 u8 r14;
526 u8 r2;
527
528 rt2x00pci_register_read(rt2x00dev, BBPCSR1, &reg);
529 rt2500pci_bbp_read(rt2x00dev, 14, &r14);
530 rt2500pci_bbp_read(rt2x00dev, 2, &r2);
531
532 /*
533 * Configure the TX antenna.
534 */
535 switch (antenna_tx) {
536 case ANTENNA_SW_DIVERSITY:
537 case ANTENNA_HW_DIVERSITY:
538 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
539 rt2x00_set_field32(&reg, BBPCSR1_CCK, 2);
540 rt2x00_set_field32(&reg, BBPCSR1_OFDM, 2);
541 break;
542 case ANTENNA_A:
543 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
544 rt2x00_set_field32(&reg, BBPCSR1_CCK, 0);
545 rt2x00_set_field32(&reg, BBPCSR1_OFDM, 0);
546 break;
547 case ANTENNA_B:
548 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
549 rt2x00_set_field32(&reg, BBPCSR1_CCK, 2);
550 rt2x00_set_field32(&reg, BBPCSR1_OFDM, 2);
551 break;
552 }
553
554 /*
555 * Configure the RX antenna.
556 */
557 switch (antenna_rx) {
558 case ANTENNA_SW_DIVERSITY:
559 case ANTENNA_HW_DIVERSITY:
560 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
561 break;
562 case ANTENNA_A:
563 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
564 break;
565 case ANTENNA_B:
566 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
567 break;
568 }
569
570 /*
571 * RT2525E and RT5222 need to flip TX I/Q
572 */
573 if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
574 rt2x00_rf(&rt2x00dev->chip, RF5222)) {
575 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
576 rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 1);
577 rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 1);
578
579 /*
580 * RT2525E does not need RX I/Q Flip.
581 */
582 if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
583 rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
584 } else {
585 rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 0);
586 rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 0);
587 }
588
589 rt2x00pci_register_write(rt2x00dev, BBPCSR1, reg);
590 rt2500pci_bbp_write(rt2x00dev, 14, r14);
591 rt2500pci_bbp_write(rt2x00dev, 2, r2);
592}
593
594static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev,
595 const int short_slot_time,
596 const int beacon_int)
597{
598 u32 reg;
599
600 rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
601 rt2x00_set_field32(&reg, CSR11_SLOT_TIME,
602 short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME);
603 rt2x00pci_register_write(rt2x00dev, CSR11, reg);
604
605 rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
606 rt2x00_set_field32(&reg, CSR18_SIFS, SIFS);
607 rt2x00_set_field32(&reg, CSR18_PIFS,
608 short_slot_time ? SHORT_PIFS : PIFS);
609 rt2x00pci_register_write(rt2x00dev, CSR18, reg);
610
611 rt2x00pci_register_read(rt2x00dev, CSR19, &reg);
612 rt2x00_set_field32(&reg, CSR19_DIFS,
613 short_slot_time ? SHORT_DIFS : DIFS);
614 rt2x00_set_field32(&reg, CSR19_EIFS, EIFS);
615 rt2x00pci_register_write(rt2x00dev, CSR19, reg);
616
617 rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
618 rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
619 rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
620 rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
621
622 rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
623 rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL, beacon_int * 16);
624 rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION, beacon_int * 16);
625 rt2x00pci_register_write(rt2x00dev, CSR12, reg);
626}
627
628static void rt2500pci_config(struct rt2x00_dev *rt2x00dev,
629 const unsigned int flags,
630 struct ieee80211_conf *conf)
631{
632 int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME;
633
634 if (flags & CONFIG_UPDATE_PHYMODE)
635 rt2500pci_config_phymode(rt2x00dev, conf->phymode);
636 if (flags & CONFIG_UPDATE_CHANNEL)
637 rt2500pci_config_channel(rt2x00dev, conf->channel_val,
638 conf->channel, conf->power_level);
639 if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
640 rt2500pci_config_txpower(rt2x00dev, conf->power_level);
641 if (flags & CONFIG_UPDATE_ANTENNA)
642 rt2500pci_config_antenna(rt2x00dev, conf->antenna_sel_tx,
643 conf->antenna_sel_rx);
644 if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
645 rt2500pci_config_duration(rt2x00dev, short_slot_time,
646 conf->beacon_int);
647}
648
649/*
650 * LED functions.
651 */
652static void rt2500pci_enable_led(struct rt2x00_dev *rt2x00dev)
653{
654 u32 reg;
655
656 rt2x00pci_register_read(rt2x00dev, LEDCSR, &reg);
657
658 rt2x00_set_field32(&reg, LEDCSR_ON_PERIOD, 70);
659 rt2x00_set_field32(&reg, LEDCSR_OFF_PERIOD, 30);
660
661 if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) {
662 rt2x00_set_field32(&reg, LEDCSR_LINK, 1);
663 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 0);
664 } else if (rt2x00dev->led_mode == LED_MODE_ASUS) {
665 rt2x00_set_field32(&reg, LEDCSR_LINK, 0);
666 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 1);
667 } else {
668 rt2x00_set_field32(&reg, LEDCSR_LINK, 1);
669 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 1);
670 }
671
672 rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
673}
674
675static void rt2500pci_disable_led(struct rt2x00_dev *rt2x00dev)
676{
677 u32 reg;
678
679 rt2x00pci_register_read(rt2x00dev, LEDCSR, &reg);
680 rt2x00_set_field32(&reg, LEDCSR_LINK, 0);
681 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, 0);
682 rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
683}
684
685/*
686 * Link tuning
687 */
688static void rt2500pci_link_stats(struct rt2x00_dev *rt2x00dev)
689{
690 u32 reg;
691
692 /*
693 * Update FCS error count from register.
694 */
695 rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
696 rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR);
697
698 /*
699 * Update False CCA count from register.
700 */
701 rt2x00pci_register_read(rt2x00dev, CNT3, &reg);
702 rt2x00dev->link.false_cca = rt2x00_get_field32(reg, CNT3_FALSE_CCA);
703}
704
705static void rt2500pci_reset_tuner(struct rt2x00_dev *rt2x00dev)
706{
707 rt2500pci_bbp_write(rt2x00dev, 17, 0x48);
708 rt2x00dev->link.vgc_level = 0x48;
709}
710
711static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev)
712{
713 int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
714 u8 r17;
715
716 /*
717 * To prevent collisions with MAC ASIC on chipsets
718 * up to version C the link tuning should halt after 20
719 * seconds.
720 */
721 if (rt2x00_get_rev(&rt2x00dev->chip) < RT2560_VERSION_D &&
722 rt2x00dev->link.count > 20)
723 return;
724
725 rt2500pci_bbp_read(rt2x00dev, 17, &r17);
726
727 /*
728 * Chipset versions C and lower should directly continue
729 * to the dynamic CCA tuning.
730 */
731 if (rt2x00_get_rev(&rt2x00dev->chip) < RT2560_VERSION_D)
732 goto dynamic_cca_tune;
733
734 /*
735 * A too low RSSI will cause too much false CCA which will
736 * then corrupt the R17 tuning. To remidy this the tuning should
737 * be stopped (While making sure the R17 value will not exceed limits)
738 */
739 if (rssi < -80 && rt2x00dev->link.count > 20) {
740 if (r17 >= 0x41) {
741 r17 = rt2x00dev->link.vgc_level;
742 rt2500pci_bbp_write(rt2x00dev, 17, r17);
743 }
744 return;
745 }
746
747 /*
748 * Special big-R17 for short distance
749 */
750 if (rssi >= -58) {
751 if (r17 != 0x50)
752 rt2500pci_bbp_write(rt2x00dev, 17, 0x50);
753 return;
754 }
755
756 /*
757 * Special mid-R17 for middle distance
758 */
759 if (rssi >= -74) {
760 if (r17 != 0x41)
761 rt2500pci_bbp_write(rt2x00dev, 17, 0x41);
762 return;
763 }
764
765 /*
766 * Leave short or middle distance condition, restore r17
767 * to the dynamic tuning range.
768 */
769 if (r17 >= 0x41) {
770 rt2500pci_bbp_write(rt2x00dev, 17, rt2x00dev->link.vgc_level);
771 return;
772 }
773
774dynamic_cca_tune:
775
776 /*
777 * R17 is inside the dynamic tuning range,
778 * start tuning the link based on the false cca counter.
779 */
780 if (rt2x00dev->link.false_cca > 512 && r17 < 0x40) {
781 rt2500pci_bbp_write(rt2x00dev, 17, ++r17);
782 rt2x00dev->link.vgc_level = r17;
783 } else if (rt2x00dev->link.false_cca < 100 && r17 > 0x32) {
784 rt2500pci_bbp_write(rt2x00dev, 17, --r17);
785 rt2x00dev->link.vgc_level = r17;
786 }
787}
788
789/*
790 * Initialization functions.
791 */
792static void rt2500pci_init_rxring(struct rt2x00_dev *rt2x00dev)
793{
794 struct data_ring *ring = rt2x00dev->rx;
795 struct data_desc *rxd;
796 unsigned int i;
797 u32 word;
798
799 memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
800
801 for (i = 0; i < ring->stats.limit; i++) {
802 rxd = ring->entry[i].priv;
803
804 rt2x00_desc_read(rxd, 1, &word);
805 rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS,
806 ring->entry[i].data_dma);
807 rt2x00_desc_write(rxd, 1, word);
808
809 rt2x00_desc_read(rxd, 0, &word);
810 rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
811 rt2x00_desc_write(rxd, 0, word);
812 }
813
814 rt2x00_ring_index_clear(rt2x00dev->rx);
815}
816
817static void rt2500pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue)
818{
819 struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue);
820 struct data_desc *txd;
821 unsigned int i;
822 u32 word;
823
824 memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
825
826 for (i = 0; i < ring->stats.limit; i++) {
827 txd = ring->entry[i].priv;
828
829 rt2x00_desc_read(txd, 1, &word);
830 rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS,
831 ring->entry[i].data_dma);
832 rt2x00_desc_write(txd, 1, word);
833
834 rt2x00_desc_read(txd, 0, &word);
835 rt2x00_set_field32(&word, TXD_W0_VALID, 0);
836 rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
837 rt2x00_desc_write(txd, 0, word);
838 }
839
840 rt2x00_ring_index_clear(ring);
841}
842
843static int rt2500pci_init_rings(struct rt2x00_dev *rt2x00dev)
844{
845 u32 reg;
846
847 /*
848 * Initialize rings.
849 */
850 rt2500pci_init_rxring(rt2x00dev);
851 rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
852 rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
853 rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON);
854 rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
855
856 /*
857 * Initialize registers.
858 */
859 rt2x00pci_register_read(rt2x00dev, TXCSR2, &reg);
860 rt2x00_set_field32(&reg, TXCSR2_TXD_SIZE,
861 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size);
862 rt2x00_set_field32(&reg, TXCSR2_NUM_TXD,
863 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit);
864 rt2x00_set_field32(&reg, TXCSR2_NUM_ATIM,
865 rt2x00dev->bcn[1].stats.limit);
866 rt2x00_set_field32(&reg, TXCSR2_NUM_PRIO,
867 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit);
868 rt2x00pci_register_write(rt2x00dev, TXCSR2, reg);
869
870 rt2x00pci_register_read(rt2x00dev, TXCSR3, &reg);
871 rt2x00_set_field32(&reg, TXCSR3_TX_RING_REGISTER,
872 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma);
873 rt2x00pci_register_write(rt2x00dev, TXCSR3, reg);
874
875 rt2x00pci_register_read(rt2x00dev, TXCSR5, &reg);
876 rt2x00_set_field32(&reg, TXCSR5_PRIO_RING_REGISTER,
877 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma);
878 rt2x00pci_register_write(rt2x00dev, TXCSR5, reg);
879
880 rt2x00pci_register_read(rt2x00dev, TXCSR4, &reg);
881 rt2x00_set_field32(&reg, TXCSR4_ATIM_RING_REGISTER,
882 rt2x00dev->bcn[1].data_dma);
883 rt2x00pci_register_write(rt2x00dev, TXCSR4, reg);
884
885 rt2x00pci_register_read(rt2x00dev, TXCSR6, &reg);
886 rt2x00_set_field32(&reg, TXCSR6_BEACON_RING_REGISTER,
887 rt2x00dev->bcn[0].data_dma);
888 rt2x00pci_register_write(rt2x00dev, TXCSR6, reg);
889
890 rt2x00pci_register_read(rt2x00dev, RXCSR1, &reg);
891 rt2x00_set_field32(&reg, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size);
892 rt2x00_set_field32(&reg, RXCSR1_NUM_RXD, rt2x00dev->rx->stats.limit);
893 rt2x00pci_register_write(rt2x00dev, RXCSR1, reg);
894
895 rt2x00pci_register_read(rt2x00dev, RXCSR2, &reg);
896 rt2x00_set_field32(&reg, RXCSR2_RX_RING_REGISTER,
897 rt2x00dev->rx->data_dma);
898 rt2x00pci_register_write(rt2x00dev, RXCSR2, reg);
899
900 return 0;
901}
902
903static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev)
904{
905 u32 reg;
906
907 rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002);
908 rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002);
909 rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00020002);
910 rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002);
911
912 rt2x00pci_register_read(rt2x00dev, TIMECSR, &reg);
913 rt2x00_set_field32(&reg, TIMECSR_US_COUNT, 33);
914 rt2x00_set_field32(&reg, TIMECSR_US_64_COUNT, 63);
915 rt2x00_set_field32(&reg, TIMECSR_BEACON_EXPECT, 0);
916 rt2x00pci_register_write(rt2x00dev, TIMECSR, reg);
917
918 rt2x00pci_register_read(rt2x00dev, CSR9, &reg);
919 rt2x00_set_field32(&reg, CSR9_MAX_FRAME_UNIT,
920 rt2x00dev->rx->data_size / 128);
921 rt2x00pci_register_write(rt2x00dev, CSR9, reg);
922
923 /*
924 * Always use CWmin and CWmax set in descriptor.
925 */
926 rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
927 rt2x00_set_field32(&reg, CSR11_CW_SELECT, 0);
928 rt2x00pci_register_write(rt2x00dev, CSR11, reg);
929
930 rt2x00pci_register_write(rt2x00dev, CNT3, 0);
931
932 rt2x00pci_register_read(rt2x00dev, TXCSR8, &reg);
933 rt2x00_set_field32(&reg, TXCSR8_BBP_ID0, 10);
934 rt2x00_set_field32(&reg, TXCSR8_BBP_ID0_VALID, 1);
935 rt2x00_set_field32(&reg, TXCSR8_BBP_ID1, 11);
936 rt2x00_set_field32(&reg, TXCSR8_BBP_ID1_VALID, 1);
937 rt2x00_set_field32(&reg, TXCSR8_BBP_ID2, 13);
938 rt2x00_set_field32(&reg, TXCSR8_BBP_ID2_VALID, 1);
939 rt2x00_set_field32(&reg, TXCSR8_BBP_ID3, 12);
940 rt2x00_set_field32(&reg, TXCSR8_BBP_ID3_VALID, 1);
941 rt2x00pci_register_write(rt2x00dev, TXCSR8, reg);
942
943 rt2x00pci_register_read(rt2x00dev, ARTCSR0, &reg);
944 rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_1MBS, 112);
945 rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_2MBS, 56);
946 rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_5_5MBS, 20);
947 rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_11MBS, 10);
948 rt2x00pci_register_write(rt2x00dev, ARTCSR0, reg);
949
950 rt2x00pci_register_read(rt2x00dev, ARTCSR1, &reg);
951 rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_6MBS, 45);
952 rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_9MBS, 37);
953 rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_12MBS, 33);
954 rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_18MBS, 29);
955 rt2x00pci_register_write(rt2x00dev, ARTCSR1, reg);
956
957 rt2x00pci_register_read(rt2x00dev, ARTCSR2, &reg);
958 rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_24MBS, 29);
959 rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_36MBS, 25);
960 rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_48MBS, 25);
961 rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_54MBS, 25);
962 rt2x00pci_register_write(rt2x00dev, ARTCSR2, reg);
963
964 rt2x00pci_register_read(rt2x00dev, RXCSR3, &reg);
965 rt2x00_set_field32(&reg, RXCSR3_BBP_ID0, 47); /* CCK Signal */
966 rt2x00_set_field32(&reg, RXCSR3_BBP_ID0_VALID, 1);
967 rt2x00_set_field32(&reg, RXCSR3_BBP_ID1, 51); /* Rssi */
968 rt2x00_set_field32(&reg, RXCSR3_BBP_ID1_VALID, 1);
969 rt2x00_set_field32(&reg, RXCSR3_BBP_ID2, 42); /* OFDM Rate */
970 rt2x00_set_field32(&reg, RXCSR3_BBP_ID2_VALID, 1);
971 rt2x00_set_field32(&reg, RXCSR3_BBP_ID3, 51); /* RSSI */
972 rt2x00_set_field32(&reg, RXCSR3_BBP_ID3_VALID, 1);
973 rt2x00pci_register_write(rt2x00dev, RXCSR3, reg);
974
975 rt2x00pci_register_read(rt2x00dev, PCICSR, &reg);
976 rt2x00_set_field32(&reg, PCICSR_BIG_ENDIAN, 0);
977 rt2x00_set_field32(&reg, PCICSR_RX_TRESHOLD, 0);
978 rt2x00_set_field32(&reg, PCICSR_TX_TRESHOLD, 3);
979 rt2x00_set_field32(&reg, PCICSR_BURST_LENTH, 1);
980 rt2x00_set_field32(&reg, PCICSR_ENABLE_CLK, 1);
981 rt2x00_set_field32(&reg, PCICSR_READ_MULTIPLE, 1);
982 rt2x00_set_field32(&reg, PCICSR_WRITE_INVALID, 1);
983 rt2x00pci_register_write(rt2x00dev, PCICSR, reg);
984
985 rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100);
986
987 rt2x00pci_register_write(rt2x00dev, GPIOCSR, 0x0000ff00);
988 rt2x00pci_register_write(rt2x00dev, TESTCSR, 0x000000f0);
989
990 if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
991 return -EBUSY;
992
993 rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00213223);
994 rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518);
995
996 rt2x00pci_register_read(rt2x00dev, MACCSR2, &reg);
997 rt2x00_set_field32(&reg, MACCSR2_DELAY, 64);
998 rt2x00pci_register_write(rt2x00dev, MACCSR2, reg);
999
1000 rt2x00pci_register_read(rt2x00dev, RALINKCSR, &reg);
1001 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA0, 17);
1002 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID0, 26);
1003 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID0, 1);
1004 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA1, 0);
1005 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID1, 26);
1006 rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID1, 1);
1007 rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg);
1008
1009 rt2x00pci_register_write(rt2x00dev, BBPCSR1, 0x82188200);
1010
1011 rt2x00pci_register_write(rt2x00dev, TXACKCSR0, 0x00000020);
1012
1013 rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
1014 rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 1);
1015 rt2x00_set_field32(&reg, CSR1_BBP_RESET, 0);
1016 rt2x00_set_field32(&reg, CSR1_HOST_READY, 0);
1017 rt2x00pci_register_write(rt2x00dev, CSR1, reg);
1018
1019 rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
1020 rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 0);
1021 rt2x00_set_field32(&reg, CSR1_HOST_READY, 1);
1022 rt2x00pci_register_write(rt2x00dev, CSR1, reg);
1023
1024 /*
1025 * We must clear the FCS and FIFO error count.
1026 * These registers are cleared on read,
1027 * so we may pass a useless variable to store the value.
1028 */
1029 rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
1030 rt2x00pci_register_read(rt2x00dev, CNT4, &reg);
1031
1032 return 0;
1033}
1034
1035static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev)
1036{
1037 unsigned int i;
1038 u16 eeprom;
1039 u8 reg_id;
1040 u8 value;
1041
1042 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1043 rt2500pci_bbp_read(rt2x00dev, 0, &value);
1044 if ((value != 0xff) && (value != 0x00))
1045 goto continue_csr_init;
1046 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
1047 udelay(REGISTER_BUSY_DELAY);
1048 }
1049
1050 ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
1051 return -EACCES;
1052
1053continue_csr_init:
1054 rt2500pci_bbp_write(rt2x00dev, 3, 0x02);
1055 rt2500pci_bbp_write(rt2x00dev, 4, 0x19);
1056 rt2500pci_bbp_write(rt2x00dev, 14, 0x1c);
1057 rt2500pci_bbp_write(rt2x00dev, 15, 0x30);
1058 rt2500pci_bbp_write(rt2x00dev, 16, 0xac);
1059 rt2500pci_bbp_write(rt2x00dev, 18, 0x18);
1060 rt2500pci_bbp_write(rt2x00dev, 19, 0xff);
1061 rt2500pci_bbp_write(rt2x00dev, 20, 0x1e);
1062 rt2500pci_bbp_write(rt2x00dev, 21, 0x08);
1063 rt2500pci_bbp_write(rt2x00dev, 22, 0x08);
1064 rt2500pci_bbp_write(rt2x00dev, 23, 0x08);
1065 rt2500pci_bbp_write(rt2x00dev, 24, 0x70);
1066 rt2500pci_bbp_write(rt2x00dev, 25, 0x40);
1067 rt2500pci_bbp_write(rt2x00dev, 26, 0x08);
1068 rt2500pci_bbp_write(rt2x00dev, 27, 0x23);
1069 rt2500pci_bbp_write(rt2x00dev, 30, 0x10);
1070 rt2500pci_bbp_write(rt2x00dev, 31, 0x2b);
1071 rt2500pci_bbp_write(rt2x00dev, 32, 0xb9);
1072 rt2500pci_bbp_write(rt2x00dev, 34, 0x12);
1073 rt2500pci_bbp_write(rt2x00dev, 35, 0x50);
1074 rt2500pci_bbp_write(rt2x00dev, 39, 0xc4);
1075 rt2500pci_bbp_write(rt2x00dev, 40, 0x02);
1076 rt2500pci_bbp_write(rt2x00dev, 41, 0x60);
1077 rt2500pci_bbp_write(rt2x00dev, 53, 0x10);
1078 rt2500pci_bbp_write(rt2x00dev, 54, 0x18);
1079 rt2500pci_bbp_write(rt2x00dev, 56, 0x08);
1080 rt2500pci_bbp_write(rt2x00dev, 57, 0x10);
1081 rt2500pci_bbp_write(rt2x00dev, 58, 0x08);
1082 rt2500pci_bbp_write(rt2x00dev, 61, 0x6d);
1083 rt2500pci_bbp_write(rt2x00dev, 62, 0x10);
1084
1085 DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
1086 for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1087 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1088
1089 if (eeprom != 0xffff && eeprom != 0x0000) {
1090 reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1091 value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1092 DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
1093 reg_id, value);
1094 rt2500pci_bbp_write(rt2x00dev, reg_id, value);
1095 }
1096 }
1097 DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
1098
1099 return 0;
1100}
1101
1102/*
1103 * Device state switch handlers.
1104 */
1105static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
1106 enum dev_state state)
1107{
1108 u32 reg;
1109
1110 rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
1111 rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
1112 state == STATE_RADIO_RX_OFF);
1113 rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
1114}
1115
1116static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
1117 enum dev_state state)
1118{
1119 int mask = (state == STATE_RADIO_IRQ_OFF);
1120 u32 reg;
1121
1122 /*
1123 * When interrupts are being enabled, the interrupt registers
1124 * should clear the register to assure a clean state.
1125 */
1126 if (state == STATE_RADIO_IRQ_ON) {
1127 rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1128 rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1129 }
1130
1131 /*
1132 * Only toggle the interrupts bits we are going to use.
1133 * Non-checked interrupt bits are disabled by default.
1134 */
1135 rt2x00pci_register_read(rt2x00dev, CSR8, &reg);
1136 rt2x00_set_field32(&reg, CSR8_TBCN_EXPIRE, mask);
1137 rt2x00_set_field32(&reg, CSR8_TXDONE_TXRING, mask);
1138 rt2x00_set_field32(&reg, CSR8_TXDONE_ATIMRING, mask);
1139 rt2x00_set_field32(&reg, CSR8_TXDONE_PRIORING, mask);
1140 rt2x00_set_field32(&reg, CSR8_RXDONE, mask);
1141 rt2x00pci_register_write(rt2x00dev, CSR8, reg);
1142}
1143
1144static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev)
1145{
1146 /*
1147 * Initialize all registers.
1148 */
1149 if (rt2500pci_init_rings(rt2x00dev) ||
1150 rt2500pci_init_registers(rt2x00dev) ||
1151 rt2500pci_init_bbp(rt2x00dev)) {
1152 ERROR(rt2x00dev, "Register initialization failed.\n");
1153 return -EIO;
1154 }
1155
1156 /*
1157 * Enable interrupts.
1158 */
1159 rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON);
1160
1161 /*
1162 * Enable LED
1163 */
1164 rt2500pci_enable_led(rt2x00dev);
1165
1166 return 0;
1167}
1168
1169static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev)
1170{
1171 u32 reg;
1172
1173 /*
1174 * Disable LED
1175 */
1176 rt2500pci_disable_led(rt2x00dev);
1177
1178 rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
1179
1180 /*
1181 * Disable synchronisation.
1182 */
1183 rt2x00pci_register_write(rt2x00dev, CSR14, 0);
1184
1185 /*
1186 * Cancel RX and TX.
1187 */
1188 rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1189 rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
1190 rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1191
1192 /*
1193 * Disable interrupts.
1194 */
1195 rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF);
1196}
1197
1198static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev,
1199 enum dev_state state)
1200{
1201 u32 reg;
1202 unsigned int i;
1203 char put_to_sleep;
1204 char bbp_state;
1205 char rf_state;
1206
1207 put_to_sleep = (state != STATE_AWAKE);
1208
1209 rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
1210 rt2x00_set_field32(&reg, PWRCSR1_SET_STATE, 1);
1211 rt2x00_set_field32(&reg, PWRCSR1_BBP_DESIRE_STATE, state);
1212 rt2x00_set_field32(&reg, PWRCSR1_RF_DESIRE_STATE, state);
1213 rt2x00_set_field32(&reg, PWRCSR1_PUT_TO_SLEEP, put_to_sleep);
1214 rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg);
1215
1216 /*
1217 * Device is not guaranteed to be in the requested state yet.
1218 * We must wait until the register indicates that the
1219 * device has entered the correct state.
1220 */
1221 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1222 rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
1223 bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE);
1224 rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE);
1225 if (bbp_state == state && rf_state == state)
1226 return 0;
1227 msleep(10);
1228 }
1229
1230 NOTICE(rt2x00dev, "Device failed to enter state %d, "
1231 "current device state: bbp %d and rf %d.\n",
1232 state, bbp_state, rf_state);
1233
1234 return -EBUSY;
1235}
1236
1237static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
1238 enum dev_state state)
1239{
1240 int retval = 0;
1241
1242 switch (state) {
1243 case STATE_RADIO_ON:
1244 retval = rt2500pci_enable_radio(rt2x00dev);
1245 break;
1246 case STATE_RADIO_OFF:
1247 rt2500pci_disable_radio(rt2x00dev);
1248 break;
1249 case STATE_RADIO_RX_ON:
1250 case STATE_RADIO_RX_OFF:
1251 rt2500pci_toggle_rx(rt2x00dev, state);
1252 break;
1253 case STATE_DEEP_SLEEP:
1254 case STATE_SLEEP:
1255 case STATE_STANDBY:
1256 case STATE_AWAKE:
1257 retval = rt2500pci_set_state(rt2x00dev, state);
1258 break;
1259 default:
1260 retval = -ENOTSUPP;
1261 break;
1262 }
1263
1264 return retval;
1265}
1266
1267/*
1268 * TX descriptor initialization
1269 */
1270static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1271 struct data_desc *txd,
1272 struct data_entry_desc *desc,
1273 struct ieee80211_hdr *ieee80211hdr,
1274 unsigned int length,
1275 struct ieee80211_tx_control *control)
1276{
1277 u32 word;
1278
1279 /*
1280 * Start writing the descriptor words.
1281 */
1282 rt2x00_desc_read(txd, 2, &word);
1283 rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER);
1284 rt2x00_set_field32(&word, TXD_W2_AIFS, desc->aifs);
1285 rt2x00_set_field32(&word, TXD_W2_CWMIN, desc->cw_min);
1286 rt2x00_set_field32(&word, TXD_W2_CWMAX, desc->cw_max);
1287 rt2x00_desc_write(txd, 2, word);
1288
1289 rt2x00_desc_read(txd, 3, &word);
1290 rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, desc->signal);
1291 rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, desc->service);
1292 rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW, desc->length_low);
1293 rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH, desc->length_high);
1294 rt2x00_desc_write(txd, 3, word);
1295
1296 rt2x00_desc_read(txd, 10, &word);
1297 rt2x00_set_field32(&word, TXD_W10_RTS,
1298 test_bit(ENTRY_TXD_RTS_FRAME, &desc->flags));
1299 rt2x00_desc_write(txd, 10, word);
1300
1301 rt2x00_desc_read(txd, 0, &word);
1302 rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
1303 rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1304 rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1305 test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
1306 rt2x00_set_field32(&word, TXD_W0_ACK,
1307 !(control->flags & IEEE80211_TXCTL_NO_ACK));
1308 rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1309 test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
1310 rt2x00_set_field32(&word, TXD_W0_OFDM,
1311 test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags));
1312 rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1);
1313 rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
1314 rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1315 !!(control->flags &
1316 IEEE80211_TXCTL_LONG_RETRY_LIMIT));
1317 rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length);
1318 rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
1319 rt2x00_desc_write(txd, 0, word);
1320}
1321
1322/*
1323 * TX data initialization
1324 */
1325static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1326 unsigned int queue)
1327{
1328 u32 reg;
1329
1330 if (queue == IEEE80211_TX_QUEUE_BEACON) {
1331 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
1332 if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
1333 rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
1334 rt2x00pci_register_write(rt2x00dev, CSR14, reg);
1335 }
1336 return;
1337 }
1338
1339 rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1340 if (queue == IEEE80211_TX_QUEUE_DATA0)
1341 rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO, 1);
1342 else if (queue == IEEE80211_TX_QUEUE_DATA1)
1343 rt2x00_set_field32(&reg, TXCSR0_KICK_TX, 1);
1344 else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON)
1345 rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM, 1);
1346 rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1347}
1348
1349/*
1350 * RX control handlers
1351 */
1352static int rt2500pci_fill_rxdone(struct data_entry *entry,
1353 int *signal, int *rssi, int *ofdm, int *size)
1354{
1355 struct data_desc *rxd = entry->priv;
1356 u32 word0;
1357 u32 word2;
1358
1359 rt2x00_desc_read(rxd, 0, &word0);
1360 rt2x00_desc_read(rxd, 2, &word2);
1361
1362 if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
1363 rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR) ||
1364 rt2x00_get_field32(word0, RXD_W0_ICV_ERROR))
1365 return -EINVAL;
1366
1367 *signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
1368 *rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
1369 entry->ring->rt2x00dev->rssi_offset;
1370 *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
1371 *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1372
1373 return 0;
1374}
1375
1376/*
1377 * Interrupt functions.
1378 */
1379static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue)
1380{
1381 struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue);
1382 struct data_entry *entry;
1383 struct data_desc *txd;
1384 u32 word;
1385 int tx_status;
1386 int retry;
1387
1388 while (!rt2x00_ring_empty(ring)) {
1389 entry = rt2x00_get_data_entry_done(ring);
1390 txd = entry->priv;
1391 rt2x00_desc_read(txd, 0, &word);
1392
1393 if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
1394 !rt2x00_get_field32(word, TXD_W0_VALID))
1395 break;
1396
1397 /*
1398 * Obtain the status about this packet.
1399 */
1400 tx_status = rt2x00_get_field32(word, TXD_W0_RESULT);
1401 retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
1402
1403 rt2x00lib_txdone(entry, tx_status, retry);
1404
1405 /*
1406 * Make this entry available for reuse.
1407 */
1408 entry->flags = 0;
1409 rt2x00_set_field32(&word, TXD_W0_VALID, 0);
1410 rt2x00_desc_write(txd, 0, word);
1411 rt2x00_ring_index_done_inc(ring);
1412 }
1413
1414 /*
1415 * If the data ring was full before the txdone handler
1416 * we must make sure the packet queue in the mac80211 stack
1417 * is reenabled when the txdone handler has finished.
1418 */
1419 entry = ring->entry;
1420 if (!rt2x00_ring_full(ring))
1421 ieee80211_wake_queue(rt2x00dev->hw,
1422 entry->tx_status.control.queue);
1423}
1424
1425static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
1426{
1427 struct rt2x00_dev *rt2x00dev = dev_instance;
1428 u32 reg;
1429
1430 /*
1431 * Get the interrupt sources & saved to local variable.
1432 * Write register value back to clear pending interrupts.
1433 */
1434 rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1435 rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1436
1437 if (!reg)
1438 return IRQ_NONE;
1439
1440 if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
1441 return IRQ_HANDLED;
1442
1443 /*
1444 * Handle interrupts, walk through all bits
1445 * and run the tasks, the bits are checked in order of
1446 * priority.
1447 */
1448
1449 /*
1450 * 1 - Beacon timer expired interrupt.
1451 */
1452 if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE))
1453 rt2x00lib_beacondone(rt2x00dev);
1454
1455 /*
1456 * 2 - Rx ring done interrupt.
1457 */
1458 if (rt2x00_get_field32(reg, CSR7_RXDONE))
1459 rt2x00pci_rxdone(rt2x00dev);
1460
1461 /*
1462 * 3 - Atim ring transmit done interrupt.
1463 */
1464 if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING))
1465 rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON);
1466
1467 /*
1468 * 4 - Priority ring transmit done interrupt.
1469 */
1470 if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
1471 rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
1472
1473 /*
1474 * 5 - Tx ring transmit done interrupt.
1475 */
1476 if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
1477 rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
1478
1479 return IRQ_HANDLED;
1480}
1481
1482/*
1483 * Device probe functions.
1484 */
1485static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1486{
1487 struct eeprom_93cx6 eeprom;
1488 u32 reg;
1489 u16 word;
1490 u8 *mac;
1491
1492 rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
1493
1494 eeprom.data = rt2x00dev;
1495 eeprom.register_read = rt2500pci_eepromregister_read;
1496 eeprom.register_write = rt2500pci_eepromregister_write;
1497 eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ?
1498 PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
1499 eeprom.reg_data_in = 0;
1500 eeprom.reg_data_out = 0;
1501 eeprom.reg_data_clock = 0;
1502 eeprom.reg_chip_select = 0;
1503
1504 eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
1505 EEPROM_SIZE / sizeof(u16));
1506
1507 /*
1508 * Start validation of the data that has been read.
1509 */
1510 mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1511 if (!is_valid_ether_addr(mac)) {
1512 random_ether_addr(mac);
1513 EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac));
1514 }
1515
1516 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1517 if (word == 0xffff) {
1518 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1519 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 0);
1520 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 0);
1521 rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, 0);
1522 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1523 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1524 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
1525 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1526 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1527 }
1528
1529 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1530 if (word == 0xffff) {
1531 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1532 rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
1533 rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
1534 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1535 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1536 }
1537
1538 rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
1539 if (word == 0xffff) {
1540 rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
1541 DEFAULT_RSSI_OFFSET);
1542 rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
1543 EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
1544 }
1545
1546 return 0;
1547}
1548
1549static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
1550{
1551 u32 reg;
1552 u16 value;
1553 u16 eeprom;
1554
1555 /*
1556 * Read EEPROM word for configuration.
1557 */
1558 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1559
1560 /*
1561 * Identify RF chipset.
1562 */
1563 value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1564 rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
1565 rt2x00_set_chip(rt2x00dev, RT2560, value, reg);
1566
1567 if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
1568 !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
1569 !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
1570 !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
1571 !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
1572 !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1573 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1574 return -ENODEV;
1575 }
1576
1577 /*
1578 * Identify default antenna configuration.
1579 */
1580 rt2x00dev->hw->conf.antenna_sel_tx =
1581 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1582 rt2x00dev->hw->conf.antenna_sel_rx =
1583 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1584
1585 /*
1586 * Store led mode, for correct led behaviour.
1587 */
1588 rt2x00dev->led_mode =
1589 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1590
1591 /*
1592 * Detect if this device has an hardware controlled radio.
1593 */
1594 if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
1595 __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
1596
1597 /*
1598 * Check if the BBP tuning should be enabled.
1599 */
1600 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1601
1602 if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
1603 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1604
1605 /*
1606 * Read the RSSI <-> dBm offset information.
1607 */
1608 rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
1609 rt2x00dev->rssi_offset =
1610 rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
1611
1612 return 0;
1613}
1614
1615/*
1616 * RF value list for RF2522
1617 * Supports: 2.4 GHz
1618 */
1619static const struct rf_channel rf_vals_bg_2522[] = {
1620 { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 },
1621 { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 },
1622 { 3, 0x00002050, 0x000c2002, 0x00000101, 0 },
1623 { 4, 0x00002050, 0x000c2016, 0x00000101, 0 },
1624 { 5, 0x00002050, 0x000c202a, 0x00000101, 0 },
1625 { 6, 0x00002050, 0x000c203e, 0x00000101, 0 },
1626 { 7, 0x00002050, 0x000c2052, 0x00000101, 0 },
1627 { 8, 0x00002050, 0x000c2066, 0x00000101, 0 },
1628 { 9, 0x00002050, 0x000c207a, 0x00000101, 0 },
1629 { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
1630 { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
1631 { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
1632 { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
1633 { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
1634};
1635
1636/*
1637 * RF value list for RF2523
1638 * Supports: 2.4 GHz
1639 */
1640static const struct rf_channel rf_vals_bg_2523[] = {
1641 { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
1642 { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
1643 { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
1644 { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
1645 { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
1646 { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
1647 { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
1648 { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
1649 { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
1650 { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
1651 { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
1652 { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
1653 { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
1654 { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
1655};
1656
1657/*
1658 * RF value list for RF2524
1659 * Supports: 2.4 GHz
1660 */
1661static const struct rf_channel rf_vals_bg_2524[] = {
1662 { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
1663 { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
1664 { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
1665 { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
1666 { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
1667 { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
1668 { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
1669 { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
1670 { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
1671 { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
1672 { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
1673 { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
1674 { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
1675 { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
1676};
1677
1678/*
1679 * RF value list for RF2525
1680 * Supports: 2.4 GHz
1681 */
1682static const struct rf_channel rf_vals_bg_2525[] = {
1683 { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
1684 { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
1685 { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
1686 { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
1687 { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
1688 { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
1689 { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
1690 { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
1691 { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
1692 { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
1693 { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
1694 { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
1695 { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
1696 { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
1697};
1698
1699/*
1700 * RF value list for RF2525e
1701 * Supports: 2.4 GHz
1702 */
1703static const struct rf_channel rf_vals_bg_2525e[] = {
1704 { 1, 0x00022020, 0x00081136, 0x00060111, 0x00000a0b },
1705 { 2, 0x00022020, 0x0008113a, 0x00060111, 0x00000a0b },
1706 { 3, 0x00022020, 0x0008113e, 0x00060111, 0x00000a0b },
1707 { 4, 0x00022020, 0x00081182, 0x00060111, 0x00000a0b },
1708 { 5, 0x00022020, 0x00081186, 0x00060111, 0x00000a0b },
1709 { 6, 0x00022020, 0x0008118a, 0x00060111, 0x00000a0b },
1710 { 7, 0x00022020, 0x0008118e, 0x00060111, 0x00000a0b },
1711 { 8, 0x00022020, 0x00081192, 0x00060111, 0x00000a0b },
1712 { 9, 0x00022020, 0x00081196, 0x00060111, 0x00000a0b },
1713 { 10, 0x00022020, 0x0008119a, 0x00060111, 0x00000a0b },
1714 { 11, 0x00022020, 0x0008119e, 0x00060111, 0x00000a0b },
1715 { 12, 0x00022020, 0x000811a2, 0x00060111, 0x00000a0b },
1716 { 13, 0x00022020, 0x000811a6, 0x00060111, 0x00000a0b },
1717 { 14, 0x00022020, 0x000811ae, 0x00060111, 0x00000a1b },
1718};
1719
1720/*
1721 * RF value list for RF5222
1722 * Supports: 2.4 GHz & 5.2 GHz
1723 */
1724static const struct rf_channel rf_vals_5222[] = {
1725 { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
1726 { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
1727 { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
1728 { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
1729 { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
1730 { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
1731 { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
1732 { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
1733 { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
1734 { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
1735 { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
1736 { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
1737 { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
1738 { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
1739
1740 /* 802.11 UNI / HyperLan 2 */
1741 { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
1742 { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
1743 { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
1744 { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
1745 { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
1746 { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
1747 { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
1748 { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
1749
1750 /* 802.11 HyperLan 2 */
1751 { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
1752 { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
1753 { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
1754 { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
1755 { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
1756 { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
1757 { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
1758 { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
1759 { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
1760 { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
1761
1762 /* 802.11 UNII */
1763 { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
1764 { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
1765 { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
1766 { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
1767 { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
1768};
1769
1770static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1771{
1772 struct hw_mode_spec *spec = &rt2x00dev->spec;
1773 u8 *txpower;
1774 unsigned int i;
1775
1776 /*
1777 * Initialize all hw fields.
1778 */
1779 rt2x00dev->hw->flags =
1780 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1781 IEEE80211_HW_MONITOR_DURING_OPER |
1782 IEEE80211_HW_NO_PROBE_FILTERING;
1783 rt2x00dev->hw->extra_tx_headroom = 0;
1784 rt2x00dev->hw->max_signal = MAX_SIGNAL;
1785 rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1786 rt2x00dev->hw->queues = 2;
1787
1788 SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
1789 SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1790 rt2x00_eeprom_addr(rt2x00dev,
1791 EEPROM_MAC_ADDR_0));
1792
1793 /*
1794 * Convert tx_power array in eeprom.
1795 */
1796 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1797 for (i = 0; i < 14; i++)
1798 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1799
1800 /*
1801 * Initialize hw_mode information.
1802 */
1803 spec->num_modes = 2;
1804 spec->num_rates = 12;
1805 spec->tx_power_a = NULL;
1806 spec->tx_power_bg = txpower;
1807 spec->tx_power_default = DEFAULT_TXPOWER;
1808
1809 if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
1810 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
1811 spec->channels = rf_vals_bg_2522;
1812 } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
1813 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
1814 spec->channels = rf_vals_bg_2523;
1815 } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
1816 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
1817 spec->channels = rf_vals_bg_2524;
1818 } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
1819 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
1820 spec->channels = rf_vals_bg_2525;
1821 } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
1822 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
1823 spec->channels = rf_vals_bg_2525e;
1824 } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1825 spec->num_channels = ARRAY_SIZE(rf_vals_5222);
1826 spec->channels = rf_vals_5222;
1827 spec->num_modes = 3;
1828 }
1829}
1830
1831static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
1832{
1833 int retval;
1834
1835 /*
1836 * Allocate eeprom data.
1837 */
1838 retval = rt2500pci_validate_eeprom(rt2x00dev);
1839 if (retval)
1840 return retval;
1841
1842 retval = rt2500pci_init_eeprom(rt2x00dev);
1843 if (retval)
1844 return retval;
1845
1846 /*
1847 * Initialize hw specifications.
1848 */
1849 rt2500pci_probe_hw_mode(rt2x00dev);
1850
1851 /*
1852 * This device requires the beacon ring
1853 */
1854 __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
1855
1856 /*
1857 * Set the rssi offset.
1858 */
1859 rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1860
1861 return 0;
1862}
1863
1864/*
1865 * IEEE80211 stack callback functions.
1866 */
1867static int rt2500pci_set_retry_limit(struct ieee80211_hw *hw,
1868 u32 short_retry, u32 long_retry)
1869{
1870 struct rt2x00_dev *rt2x00dev = hw->priv;
1871 u32 reg;
1872
1873 rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
1874 rt2x00_set_field32(&reg, CSR11_LONG_RETRY, long_retry);
1875 rt2x00_set_field32(&reg, CSR11_SHORT_RETRY, short_retry);
1876 rt2x00pci_register_write(rt2x00dev, CSR11, reg);
1877
1878 return 0;
1879}
1880
1881static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw)
1882{
1883 struct rt2x00_dev *rt2x00dev = hw->priv;
1884 u64 tsf;
1885 u32 reg;
1886
1887 rt2x00pci_register_read(rt2x00dev, CSR17, &reg);
1888 tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32;
1889 rt2x00pci_register_read(rt2x00dev, CSR16, &reg);
1890 tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER);
1891
1892 return tsf;
1893}
1894
1895static void rt2500pci_reset_tsf(struct ieee80211_hw *hw)
1896{
1897 struct rt2x00_dev *rt2x00dev = hw->priv;
1898
1899 rt2x00pci_register_write(rt2x00dev, CSR16, 0);
1900 rt2x00pci_register_write(rt2x00dev, CSR17, 0);
1901}
1902
1903static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw)
1904{
1905 struct rt2x00_dev *rt2x00dev = hw->priv;
1906 u32 reg;
1907
1908 rt2x00pci_register_read(rt2x00dev, CSR15, &reg);
1909 return rt2x00_get_field32(reg, CSR15_BEACON_SENT);
1910}
1911
1912static const struct ieee80211_ops rt2500pci_mac80211_ops = {
1913 .tx = rt2x00mac_tx,
1914 .add_interface = rt2x00mac_add_interface,
1915 .remove_interface = rt2x00mac_remove_interface,
1916 .config = rt2x00mac_config,
1917 .config_interface = rt2x00mac_config_interface,
1918 .set_multicast_list = rt2x00mac_set_multicast_list,
1919 .get_stats = rt2x00mac_get_stats,
1920 .set_retry_limit = rt2500pci_set_retry_limit,
1921 .conf_tx = rt2x00mac_conf_tx,
1922 .get_tx_stats = rt2x00mac_get_tx_stats,
1923 .get_tsf = rt2500pci_get_tsf,
1924 .reset_tsf = rt2500pci_reset_tsf,
1925 .beacon_update = rt2x00pci_beacon_update,
1926 .tx_last_beacon = rt2500pci_tx_last_beacon,
1927};
1928
1929static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
1930 .irq_handler = rt2500pci_interrupt,
1931 .probe_hw = rt2500pci_probe_hw,
1932 .initialize = rt2x00pci_initialize,
1933 .uninitialize = rt2x00pci_uninitialize,
1934 .set_device_state = rt2500pci_set_device_state,
1935#ifdef CONFIG_RT2500PCI_RFKILL
1936 .rfkill_poll = rt2500pci_rfkill_poll,
1937#endif /* CONFIG_RT2500PCI_RFKILL */
1938 .link_stats = rt2500pci_link_stats,
1939 .reset_tuner = rt2500pci_reset_tuner,
1940 .link_tuner = rt2500pci_link_tuner,
1941 .write_tx_desc = rt2500pci_write_tx_desc,
1942 .write_tx_data = rt2x00pci_write_tx_data,
1943 .kick_tx_queue = rt2500pci_kick_tx_queue,
1944 .fill_rxdone = rt2500pci_fill_rxdone,
1945 .config_mac_addr = rt2500pci_config_mac_addr,
1946 .config_bssid = rt2500pci_config_bssid,
1947 .config_packet_filter = rt2500pci_config_packet_filter,
1948 .config_type = rt2500pci_config_type,
1949 .config = rt2500pci_config,
1950};
1951
1952static const struct rt2x00_ops rt2500pci_ops = {
1953 .name = DRV_NAME,
1954 .rxd_size = RXD_DESC_SIZE,
1955 .txd_size = TXD_DESC_SIZE,
1956 .eeprom_size = EEPROM_SIZE,
1957 .rf_size = RF_SIZE,
1958 .lib = &rt2500pci_rt2x00_ops,
1959 .hw = &rt2500pci_mac80211_ops,
1960#ifdef CONFIG_RT2X00_LIB_DEBUGFS
1961 .debugfs = &rt2500pci_rt2x00debug,
1962#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1963};
1964
1965/*
1966 * RT2500pci module information.
1967 */
1968static struct pci_device_id rt2500pci_device_table[] = {
1969 { PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) },
1970 { 0, }
1971};
1972
1973MODULE_AUTHOR(DRV_PROJECT);
1974MODULE_VERSION(DRV_VERSION);
1975MODULE_DESCRIPTION("Ralink RT2500 PCI & PCMCIA Wireless LAN driver.");
1976MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards");
1977MODULE_DEVICE_TABLE(pci, rt2500pci_device_table);
1978MODULE_LICENSE("GPL");
1979
1980static struct pci_driver rt2500pci_driver = {
1981 .name = DRV_NAME,
1982 .id_table = rt2500pci_device_table,
1983 .probe = rt2x00pci_probe,
1984 .remove = __devexit_p(rt2x00pci_remove),
1985 .suspend = rt2x00pci_suspend,
1986 .resume = rt2x00pci_resume,
1987};
1988
1989static int __init rt2500pci_init(void)
1990{
1991 return pci_register_driver(&rt2500pci_driver);
1992}
1993
1994static void __exit rt2500pci_exit(void)
1995{
1996 pci_unregister_driver(&rt2500pci_driver);
1997}
1998
1999module_init(rt2500pci_init);
2000module_exit(rt2500pci_exit);
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h
new file mode 100644
index 000000000000..d92aa56b2f4b
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
@@ -0,0 +1,1236 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2500pci
23 Abstract: Data structures and registers for the rt2500pci module.
24 Supported chipsets: RT2560.
25 */
26
27#ifndef RT2500PCI_H
28#define RT2500PCI_H
29
30/*
31 * RF chip defines.
32 */
33#define RF2522 0x0000
34#define RF2523 0x0001
35#define RF2524 0x0002
36#define RF2525 0x0003
37#define RF2525E 0x0004
38#define RF5222 0x0010
39
40/*
41 * RT2560 version
42 */
43#define RT2560_VERSION_B 2
44#define RT2560_VERSION_C 3
45#define RT2560_VERSION_D 4
46
47/*
48 * Signal information.
49 * Defaul offset is required for RSSI <-> dBm conversion.
50 */
51#define MAX_SIGNAL 100
52#define MAX_RX_SSI -1
53#define DEFAULT_RSSI_OFFSET 121
54
55/*
56 * Register layout information.
57 */
58#define CSR_REG_BASE 0x0000
59#define CSR_REG_SIZE 0x0174
60#define EEPROM_BASE 0x0000
61#define EEPROM_SIZE 0x0200
62#define BBP_SIZE 0x0040
63#define RF_SIZE 0x0014
64
65/*
66 * Control/Status Registers(CSR).
67 * Some values are set in TU, whereas 1 TU == 1024 us.
68 */
69
70/*
71 * CSR0: ASIC revision number.
72 */
73#define CSR0 0x0000
74
75/*
76 * CSR1: System control register.
77 * SOFT_RESET: Software reset, 1: reset, 0: normal.
78 * BBP_RESET: Hardware reset, 1: reset, 0, release.
79 * HOST_READY: Host ready after initialization.
80 */
81#define CSR1 0x0004
82#define CSR1_SOFT_RESET FIELD32(0x00000001)
83#define CSR1_BBP_RESET FIELD32(0x00000002)
84#define CSR1_HOST_READY FIELD32(0x00000004)
85
86/*
87 * CSR2: System admin status register (invalid).
88 */
89#define CSR2 0x0008
90
91/*
92 * CSR3: STA MAC address register 0.
93 */
94#define CSR3 0x000c
95#define CSR3_BYTE0 FIELD32(0x000000ff)
96#define CSR3_BYTE1 FIELD32(0x0000ff00)
97#define CSR3_BYTE2 FIELD32(0x00ff0000)
98#define CSR3_BYTE3 FIELD32(0xff000000)
99
100/*
101 * CSR4: STA MAC address register 1.
102 */
103#define CSR4 0x0010
104#define CSR4_BYTE4 FIELD32(0x000000ff)
105#define CSR4_BYTE5 FIELD32(0x0000ff00)
106
107/*
108 * CSR5: BSSID register 0.
109 */
110#define CSR5 0x0014
111#define CSR5_BYTE0 FIELD32(0x000000ff)
112#define CSR5_BYTE1 FIELD32(0x0000ff00)
113#define CSR5_BYTE2 FIELD32(0x00ff0000)
114#define CSR5_BYTE3 FIELD32(0xff000000)
115
116/*
117 * CSR6: BSSID register 1.
118 */
119#define CSR6 0x0018
120#define CSR6_BYTE4 FIELD32(0x000000ff)
121#define CSR6_BYTE5 FIELD32(0x0000ff00)
122
123/*
124 * CSR7: Interrupt source register.
125 * Write 1 to clear.
126 * TBCN_EXPIRE: Beacon timer expired interrupt.
127 * TWAKE_EXPIRE: Wakeup timer expired interrupt.
128 * TATIMW_EXPIRE: Timer of atim window expired interrupt.
129 * TXDONE_TXRING: Tx ring transmit done interrupt.
130 * TXDONE_ATIMRING: Atim ring transmit done interrupt.
131 * TXDONE_PRIORING: Priority ring transmit done interrupt.
132 * RXDONE: Receive done interrupt.
133 * DECRYPTION_DONE: Decryption done interrupt.
134 * ENCRYPTION_DONE: Encryption done interrupt.
135 * UART1_TX_TRESHOLD: UART1 TX reaches threshold.
136 * UART1_RX_TRESHOLD: UART1 RX reaches threshold.
137 * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold.
138 * UART1_TX_BUFF_ERROR: UART1 TX buffer error.
139 * UART1_RX_BUFF_ERROR: UART1 RX buffer error.
140 * UART2_TX_TRESHOLD: UART2 TX reaches threshold.
141 * UART2_RX_TRESHOLD: UART2 RX reaches threshold.
142 * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold.
143 * UART2_TX_BUFF_ERROR: UART2 TX buffer error.
144 * UART2_RX_BUFF_ERROR: UART2 RX buffer error.
145 * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period).
146
147 */
148#define CSR7 0x001c
149#define CSR7_TBCN_EXPIRE FIELD32(0x00000001)
150#define CSR7_TWAKE_EXPIRE FIELD32(0x00000002)
151#define CSR7_TATIMW_EXPIRE FIELD32(0x00000004)
152#define CSR7_TXDONE_TXRING FIELD32(0x00000008)
153#define CSR7_TXDONE_ATIMRING FIELD32(0x00000010)
154#define CSR7_TXDONE_PRIORING FIELD32(0x00000020)
155#define CSR7_RXDONE FIELD32(0x00000040)
156#define CSR7_DECRYPTION_DONE FIELD32(0x00000080)
157#define CSR7_ENCRYPTION_DONE FIELD32(0x00000100)
158#define CSR7_UART1_TX_TRESHOLD FIELD32(0x00000200)
159#define CSR7_UART1_RX_TRESHOLD FIELD32(0x00000400)
160#define CSR7_UART1_IDLE_TRESHOLD FIELD32(0x00000800)
161#define CSR7_UART1_TX_BUFF_ERROR FIELD32(0x00001000)
162#define CSR7_UART1_RX_BUFF_ERROR FIELD32(0x00002000)
163#define CSR7_UART2_TX_TRESHOLD FIELD32(0x00004000)
164#define CSR7_UART2_RX_TRESHOLD FIELD32(0x00008000)
165#define CSR7_UART2_IDLE_TRESHOLD FIELD32(0x00010000)
166#define CSR7_UART2_TX_BUFF_ERROR FIELD32(0x00020000)
167#define CSR7_UART2_RX_BUFF_ERROR FIELD32(0x00040000)
168#define CSR7_TIMER_CSR3_EXPIRE FIELD32(0x00080000)
169
170/*
171 * CSR8: Interrupt mask register.
172 * Write 1 to mask interrupt.
173 * TBCN_EXPIRE: Beacon timer expired interrupt.
174 * TWAKE_EXPIRE: Wakeup timer expired interrupt.
175 * TATIMW_EXPIRE: Timer of atim window expired interrupt.
176 * TXDONE_TXRING: Tx ring transmit done interrupt.
177 * TXDONE_ATIMRING: Atim ring transmit done interrupt.
178 * TXDONE_PRIORING: Priority ring transmit done interrupt.
179 * RXDONE: Receive done interrupt.
180 * DECRYPTION_DONE: Decryption done interrupt.
181 * ENCRYPTION_DONE: Encryption done interrupt.
182 * UART1_TX_TRESHOLD: UART1 TX reaches threshold.
183 * UART1_RX_TRESHOLD: UART1 RX reaches threshold.
184 * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold.
185 * UART1_TX_BUFF_ERROR: UART1 TX buffer error.
186 * UART1_RX_BUFF_ERROR: UART1 RX buffer error.
187 * UART2_TX_TRESHOLD: UART2 TX reaches threshold.
188 * UART2_RX_TRESHOLD: UART2 RX reaches threshold.
189 * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold.
190 * UART2_TX_BUFF_ERROR: UART2 TX buffer error.
191 * UART2_RX_BUFF_ERROR: UART2 RX buffer error.
192 * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period).
193 */
194#define CSR8 0x0020
195#define CSR8_TBCN_EXPIRE FIELD32(0x00000001)
196#define CSR8_TWAKE_EXPIRE FIELD32(0x00000002)
197#define CSR8_TATIMW_EXPIRE FIELD32(0x00000004)
198#define CSR8_TXDONE_TXRING FIELD32(0x00000008)
199#define CSR8_TXDONE_ATIMRING FIELD32(0x00000010)
200#define CSR8_TXDONE_PRIORING FIELD32(0x00000020)
201#define CSR8_RXDONE FIELD32(0x00000040)
202#define CSR8_DECRYPTION_DONE FIELD32(0x00000080)
203#define CSR8_ENCRYPTION_DONE FIELD32(0x00000100)
204#define CSR8_UART1_TX_TRESHOLD FIELD32(0x00000200)
205#define CSR8_UART1_RX_TRESHOLD FIELD32(0x00000400)
206#define CSR8_UART1_IDLE_TRESHOLD FIELD32(0x00000800)
207#define CSR8_UART1_TX_BUFF_ERROR FIELD32(0x00001000)
208#define CSR8_UART1_RX_BUFF_ERROR FIELD32(0x00002000)
209#define CSR8_UART2_TX_TRESHOLD FIELD32(0x00004000)
210#define CSR8_UART2_RX_TRESHOLD FIELD32(0x00008000)
211#define CSR8_UART2_IDLE_TRESHOLD FIELD32(0x00010000)
212#define CSR8_UART2_TX_BUFF_ERROR FIELD32(0x00020000)
213#define CSR8_UART2_RX_BUFF_ERROR FIELD32(0x00040000)
214#define CSR8_TIMER_CSR3_EXPIRE FIELD32(0x00080000)
215
216/*
217 * CSR9: Maximum frame length register.
218 * MAX_FRAME_UNIT: Maximum frame length in 128b unit, default: 12.
219 */
220#define CSR9 0x0024
221#define CSR9_MAX_FRAME_UNIT FIELD32(0x00000f80)
222
223/*
224 * SECCSR0: WEP control register.
225 * KICK_DECRYPT: Kick decryption engine, self-clear.
226 * ONE_SHOT: 0: ring mode, 1: One shot only mode.
227 * DESC_ADDRESS: Descriptor physical address of frame.
228 */
229#define SECCSR0 0x0028
230#define SECCSR0_KICK_DECRYPT FIELD32(0x00000001)
231#define SECCSR0_ONE_SHOT FIELD32(0x00000002)
232#define SECCSR0_DESC_ADDRESS FIELD32(0xfffffffc)
233
234/*
235 * CSR11: Back-off control register.
236 * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1).
237 * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1).
238 * SLOT_TIME: Slot time, default is 20us for 802.11b
239 * CW_SELECT: CWmin/CWmax selection, 1: Register, 0: TXD.
240 * LONG_RETRY: Long retry count.
241 * SHORT_RETRY: Short retry count.
242 */
243#define CSR11 0x002c
244#define CSR11_CWMIN FIELD32(0x0000000f)
245#define CSR11_CWMAX FIELD32(0x000000f0)
246#define CSR11_SLOT_TIME FIELD32(0x00001f00)
247#define CSR11_CW_SELECT FIELD32(0x00002000)
248#define CSR11_LONG_RETRY FIELD32(0x00ff0000)
249#define CSR11_SHORT_RETRY FIELD32(0xff000000)
250
251/*
252 * CSR12: Synchronization configuration register 0.
253 * All units in 1/16 TU.
254 * BEACON_INTERVAL: Beacon interval, default is 100 TU.
255 * CFP_MAX_DURATION: Cfp maximum duration, default is 100 TU.
256 */
257#define CSR12 0x0030
258#define CSR12_BEACON_INTERVAL FIELD32(0x0000ffff)
259#define CSR12_CFP_MAX_DURATION FIELD32(0xffff0000)
260
261/*
262 * CSR13: Synchronization configuration register 1.
263 * All units in 1/16 TU.
264 * ATIMW_DURATION: Atim window duration.
265 * CFP_PERIOD: Cfp period, default is 0 TU.
266 */
267#define CSR13 0x0034
268#define CSR13_ATIMW_DURATION FIELD32(0x0000ffff)
269#define CSR13_CFP_PERIOD FIELD32(0x00ff0000)
270
271/*
272 * CSR14: Synchronization control register.
273 * TSF_COUNT: Enable tsf auto counting.
274 * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
275 * TBCN: Enable tbcn with reload value.
276 * TCFP: Enable tcfp & cfp / cp switching.
277 * TATIMW: Enable tatimw & atim window switching.
278 * BEACON_GEN: Enable beacon generator.
279 * CFP_COUNT_PRELOAD: Cfp count preload value.
280 * TBCM_PRELOAD: Tbcn preload value in units of 64us.
281 */
282#define CSR14 0x0038
283#define CSR14_TSF_COUNT FIELD32(0x00000001)
284#define CSR14_TSF_SYNC FIELD32(0x00000006)
285#define CSR14_TBCN FIELD32(0x00000008)
286#define CSR14_TCFP FIELD32(0x00000010)
287#define CSR14_TATIMW FIELD32(0x00000020)
288#define CSR14_BEACON_GEN FIELD32(0x00000040)
289#define CSR14_CFP_COUNT_PRELOAD FIELD32(0x0000ff00)
290#define CSR14_TBCM_PRELOAD FIELD32(0xffff0000)
291
292/*
293 * CSR15: Synchronization status register.
294 * CFP: ASIC is in contention-free period.
295 * ATIMW: ASIC is in ATIM window.
296 * BEACON_SENT: Beacon is send.
297 */
298#define CSR15 0x003c
299#define CSR15_CFP FIELD32(0x00000001)
300#define CSR15_ATIMW FIELD32(0x00000002)
301#define CSR15_BEACON_SENT FIELD32(0x00000004)
302
303/*
304 * CSR16: TSF timer register 0.
305 */
306#define CSR16 0x0040
307#define CSR16_LOW_TSFTIMER FIELD32(0xffffffff)
308
309/*
310 * CSR17: TSF timer register 1.
311 */
312#define CSR17 0x0044
313#define CSR17_HIGH_TSFTIMER FIELD32(0xffffffff)
314
315/*
316 * CSR18: IFS timer register 0.
317 * SIFS: Sifs, default is 10 us.
318 * PIFS: Pifs, default is 30 us.
319 */
320#define CSR18 0x0048
321#define CSR18_SIFS FIELD32(0x000001ff)
322#define CSR18_PIFS FIELD32(0x001f0000)
323
324/*
325 * CSR19: IFS timer register 1.
326 * DIFS: Difs, default is 50 us.
327 * EIFS: Eifs, default is 364 us.
328 */
329#define CSR19 0x004c
330#define CSR19_DIFS FIELD32(0x0000ffff)
331#define CSR19_EIFS FIELD32(0xffff0000)
332
333/*
334 * CSR20: Wakeup timer register.
335 * DELAY_AFTER_TBCN: Delay after tbcn expired in units of 1/16 TU.
336 * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
337 * AUTOWAKE: Enable auto wakeup / sleep mechanism.
338 */
339#define CSR20 0x0050
340#define CSR20_DELAY_AFTER_TBCN FIELD32(0x0000ffff)
341#define CSR20_TBCN_BEFORE_WAKEUP FIELD32(0x00ff0000)
342#define CSR20_AUTOWAKE FIELD32(0x01000000)
343
344/*
345 * CSR21: EEPROM control register.
346 * RELOAD: Write 1 to reload eeprom content.
347 * TYPE_93C46: 1: 93c46, 0:93c66.
348 */
349#define CSR21 0x0054
350#define CSR21_RELOAD FIELD32(0x00000001)
351#define CSR21_EEPROM_DATA_CLOCK FIELD32(0x00000002)
352#define CSR21_EEPROM_CHIP_SELECT FIELD32(0x00000004)
353#define CSR21_EEPROM_DATA_IN FIELD32(0x00000008)
354#define CSR21_EEPROM_DATA_OUT FIELD32(0x00000010)
355#define CSR21_TYPE_93C46 FIELD32(0x00000020)
356
357/*
358 * CSR22: CFP control register.
359 * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU.
360 * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain.
361 */
362#define CSR22 0x0058
363#define CSR22_CFP_DURATION_REMAIN FIELD32(0x0000ffff)
364#define CSR22_RELOAD_CFP_DURATION FIELD32(0x00010000)
365
366/*
367 * Transmit related CSRs.
368 * Some values are set in TU, whereas 1 TU == 1024 us.
369 */
370
371/*
372 * TXCSR0: TX Control Register.
373 * KICK_TX: Kick tx ring.
374 * KICK_ATIM: Kick atim ring.
375 * KICK_PRIO: Kick priority ring.
376 * ABORT: Abort all transmit related ring operation.
377 */
378#define TXCSR0 0x0060
379#define TXCSR0_KICK_TX FIELD32(0x00000001)
380#define TXCSR0_KICK_ATIM FIELD32(0x00000002)
381#define TXCSR0_KICK_PRIO FIELD32(0x00000004)
382#define TXCSR0_ABORT FIELD32(0x00000008)
383
384/*
385 * TXCSR1: TX Configuration Register.
386 * ACK_TIMEOUT: Ack timeout, default = sifs + 2*slottime + acktime @ 1mbps.
387 * ACK_CONSUME_TIME: Ack consume time, default = sifs + acktime @ 1mbps.
388 * TSF_OFFSET: Insert tsf offset.
389 * AUTORESPONDER: Enable auto responder which include ack & cts.
390 */
391#define TXCSR1 0x0064
392#define TXCSR1_ACK_TIMEOUT FIELD32(0x000001ff)
393#define TXCSR1_ACK_CONSUME_TIME FIELD32(0x0003fe00)
394#define TXCSR1_TSF_OFFSET FIELD32(0x00fc0000)
395#define TXCSR1_AUTORESPONDER FIELD32(0x01000000)
396
397/*
398 * TXCSR2: Tx descriptor configuration register.
399 * TXD_SIZE: Tx descriptor size, default is 48.
400 * NUM_TXD: Number of tx entries in ring.
401 * NUM_ATIM: Number of atim entries in ring.
402 * NUM_PRIO: Number of priority entries in ring.
403 */
404#define TXCSR2 0x0068
405#define TXCSR2_TXD_SIZE FIELD32(0x000000ff)
406#define TXCSR2_NUM_TXD FIELD32(0x0000ff00)
407#define TXCSR2_NUM_ATIM FIELD32(0x00ff0000)
408#define TXCSR2_NUM_PRIO FIELD32(0xff000000)
409
410/*
411 * TXCSR3: TX Ring Base address register.
412 */
413#define TXCSR3 0x006c
414#define TXCSR3_TX_RING_REGISTER FIELD32(0xffffffff)
415
416/*
417 * TXCSR4: TX Atim Ring Base address register.
418 */
419#define TXCSR4 0x0070
420#define TXCSR4_ATIM_RING_REGISTER FIELD32(0xffffffff)
421
422/*
423 * TXCSR5: TX Prio Ring Base address register.
424 */
425#define TXCSR5 0x0074
426#define TXCSR5_PRIO_RING_REGISTER FIELD32(0xffffffff)
427
428/*
429 * TXCSR6: Beacon Base address register.
430 */
431#define TXCSR6 0x0078
432#define TXCSR6_BEACON_RING_REGISTER FIELD32(0xffffffff)
433
434/*
435 * TXCSR7: Auto responder control register.
436 * AR_POWERMANAGEMENT: Auto responder power management bit.
437 */
438#define TXCSR7 0x007c
439#define TXCSR7_AR_POWERMANAGEMENT FIELD32(0x00000001)
440
441/*
442 * TXCSR8: CCK Tx BBP register.
443 */
444#define TXCSR8 0x0098
445#define TXCSR8_BBP_ID0 FIELD32(0x0000007f)
446#define TXCSR8_BBP_ID0_VALID FIELD32(0x00000080)
447#define TXCSR8_BBP_ID1 FIELD32(0x00007f00)
448#define TXCSR8_BBP_ID1_VALID FIELD32(0x00008000)
449#define TXCSR8_BBP_ID2 FIELD32(0x007f0000)
450#define TXCSR8_BBP_ID2_VALID FIELD32(0x00800000)
451#define TXCSR8_BBP_ID3 FIELD32(0x7f000000)
452#define TXCSR8_BBP_ID3_VALID FIELD32(0x80000000)
453
454/*
455 * TXCSR9: OFDM TX BBP registers
456 * OFDM_SIGNAL: BBP rate field address for OFDM.
457 * OFDM_SERVICE: BBP service field address for OFDM.
458 * OFDM_LENGTH_LOW: BBP length low byte address for OFDM.
459 * OFDM_LENGTH_HIGH: BBP length high byte address for OFDM.
460 */
461#define TXCSR9 0x0094
462#define TXCSR9_OFDM_RATE FIELD32(0x000000ff)
463#define TXCSR9_OFDM_SERVICE FIELD32(0x0000ff00)
464#define TXCSR9_OFDM_LENGTH_LOW FIELD32(0x00ff0000)
465#define TXCSR9_OFDM_LENGTH_HIGH FIELD32(0xff000000)
466
467/*
468 * Receive related CSRs.
469 * Some values are set in TU, whereas 1 TU == 1024 us.
470 */
471
472/*
473 * RXCSR0: RX Control Register.
474 * DISABLE_RX: Disable rx engine.
475 * DROP_CRC: Drop crc error.
476 * DROP_PHYSICAL: Drop physical error.
477 * DROP_CONTROL: Drop control frame.
478 * DROP_NOT_TO_ME: Drop not to me unicast frame.
479 * DROP_TODS: Drop frame tods bit is true.
480 * DROP_VERSION_ERROR: Drop version error frame.
481 * PASS_CRC: Pass all packets with crc attached.
482 * PASS_CRC: Pass all packets with crc attached.
483 * PASS_PLCP: Pass all packets with 4 bytes PLCP attached.
484 * DROP_MCAST: Drop multicast frames.
485 * DROP_BCAST: Drop broadcast frames.
486 * ENABLE_QOS: Accept QOS data frame and parse QOS field.
487 */
488#define RXCSR0 0x0080
489#define RXCSR0_DISABLE_RX FIELD32(0x00000001)
490#define RXCSR0_DROP_CRC FIELD32(0x00000002)
491#define RXCSR0_DROP_PHYSICAL FIELD32(0x00000004)
492#define RXCSR0_DROP_CONTROL FIELD32(0x00000008)
493#define RXCSR0_DROP_NOT_TO_ME FIELD32(0x00000010)
494#define RXCSR0_DROP_TODS FIELD32(0x00000020)
495#define RXCSR0_DROP_VERSION_ERROR FIELD32(0x00000040)
496#define RXCSR0_PASS_CRC FIELD32(0x00000080)
497#define RXCSR0_PASS_PLCP FIELD32(0x00000100)
498#define RXCSR0_DROP_MCAST FIELD32(0x00000200)
499#define RXCSR0_DROP_BCAST FIELD32(0x00000400)
500#define RXCSR0_ENABLE_QOS FIELD32(0x00000800)
501
502/*
503 * RXCSR1: RX descriptor configuration register.
504 * RXD_SIZE: Rx descriptor size, default is 32b.
505 * NUM_RXD: Number of rx entries in ring.
506 */
507#define RXCSR1 0x0084
508#define RXCSR1_RXD_SIZE FIELD32(0x000000ff)
509#define RXCSR1_NUM_RXD FIELD32(0x0000ff00)
510
511/*
512 * RXCSR2: RX Ring base address register.
513 */
514#define RXCSR2 0x0088
515#define RXCSR2_RX_RING_REGISTER FIELD32(0xffffffff)
516
517/*
518 * RXCSR3: BBP ID register for Rx operation.
519 * BBP_ID#: BBP register # id.
520 * BBP_ID#_VALID: BBP register # id is valid or not.
521 */
522#define RXCSR3 0x0090
523#define RXCSR3_BBP_ID0 FIELD32(0x0000007f)
524#define RXCSR3_BBP_ID0_VALID FIELD32(0x00000080)
525#define RXCSR3_BBP_ID1 FIELD32(0x00007f00)
526#define RXCSR3_BBP_ID1_VALID FIELD32(0x00008000)
527#define RXCSR3_BBP_ID2 FIELD32(0x007f0000)
528#define RXCSR3_BBP_ID2_VALID FIELD32(0x00800000)
529#define RXCSR3_BBP_ID3 FIELD32(0x7f000000)
530#define RXCSR3_BBP_ID3_VALID FIELD32(0x80000000)
531
532/*
533 * ARCSR1: Auto Responder PLCP config register 1.
534 * AR_BBP_DATA#: Auto responder BBP register # data.
535 * AR_BBP_ID#: Auto responder BBP register # Id.
536 */
537#define ARCSR1 0x009c
538#define ARCSR1_AR_BBP_DATA2 FIELD32(0x000000ff)
539#define ARCSR1_AR_BBP_ID2 FIELD32(0x0000ff00)
540#define ARCSR1_AR_BBP_DATA3 FIELD32(0x00ff0000)
541#define ARCSR1_AR_BBP_ID3 FIELD32(0xff000000)
542
543/*
544 * Miscellaneous Registers.
545 * Some values are set in TU, whereas 1 TU == 1024 us.
546
547 */
548
549/*
550 * PCICSR: PCI control register.
551 * BIG_ENDIAN: 1: big endian, 0: little endian.
552 * RX_TRESHOLD: Rx threshold in dw to start pci access
553 * 0: 16dw (default), 1: 8dw, 2: 4dw, 3: 32dw.
554 * TX_TRESHOLD: Tx threshold in dw to start pci access
555 * 0: 0dw (default), 1: 1dw, 2: 4dw, 3: forward.
556 * BURST_LENTH: Pci burst length 0: 4dw (default, 1: 8dw, 2: 16dw, 3:32dw.
557 * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational.
558 * READ_MULTIPLE: Enable memory read multiple.
559 * WRITE_INVALID: Enable memory write & invalid.
560 */
561#define PCICSR 0x008c
562#define PCICSR_BIG_ENDIAN FIELD32(0x00000001)
563#define PCICSR_RX_TRESHOLD FIELD32(0x00000006)
564#define PCICSR_TX_TRESHOLD FIELD32(0x00000018)
565#define PCICSR_BURST_LENTH FIELD32(0x00000060)
566#define PCICSR_ENABLE_CLK FIELD32(0x00000080)
567#define PCICSR_READ_MULTIPLE FIELD32(0x00000100)
568#define PCICSR_WRITE_INVALID FIELD32(0x00000200)
569
570/*
571 * CNT0: FCS error count.
572 * FCS_ERROR: FCS error count, cleared when read.
573 */
574#define CNT0 0x00a0
575#define CNT0_FCS_ERROR FIELD32(0x0000ffff)
576
577/*
578 * Statistic Register.
579 * CNT1: PLCP error count.
580 * CNT2: Long error count.
581 */
582#define TIMECSR2 0x00a8
583#define CNT1 0x00ac
584#define CNT2 0x00b0
585#define TIMECSR3 0x00b4
586
587/*
588 * CNT3: CCA false alarm count.
589 */
590#define CNT3 0x00b8
591#define CNT3_FALSE_CCA FIELD32(0x0000ffff)
592
593/*
594 * Statistic Register.
595 * CNT4: Rx FIFO overflow count.
596 * CNT5: Tx FIFO underrun count.
597 */
598#define CNT4 0x00bc
599#define CNT5 0x00c0
600
601/*
602 * Baseband Control Register.
603 */
604
605/*
606 * PWRCSR0: Power mode configuration register.
607 */
608#define PWRCSR0 0x00c4
609
610/*
611 * Power state transition time registers.
612 */
613#define PSCSR0 0x00c8
614#define PSCSR1 0x00cc
615#define PSCSR2 0x00d0
616#define PSCSR3 0x00d4
617
618/*
619 * PWRCSR1: Manual power control / status register.
620 * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake.
621 * SET_STATE: Set state. Write 1 to trigger, self cleared.
622 * BBP_DESIRE_STATE: BBP desired state.
623 * RF_DESIRE_STATE: RF desired state.
624 * BBP_CURR_STATE: BBP current state.
625 * RF_CURR_STATE: RF current state.
626 * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared.
627 */
628#define PWRCSR1 0x00d8
629#define PWRCSR1_SET_STATE FIELD32(0x00000001)
630#define PWRCSR1_BBP_DESIRE_STATE FIELD32(0x00000006)
631#define PWRCSR1_RF_DESIRE_STATE FIELD32(0x00000018)
632#define PWRCSR1_BBP_CURR_STATE FIELD32(0x00000060)
633#define PWRCSR1_RF_CURR_STATE FIELD32(0x00000180)
634#define PWRCSR1_PUT_TO_SLEEP FIELD32(0x00000200)
635
636/*
637 * TIMECSR: Timer control register.
638 * US_COUNT: 1 us timer count in units of clock cycles.
639 * US_64_COUNT: 64 us timer count in units of 1 us timer.
640 * BEACON_EXPECT: Beacon expect window.
641 */
642#define TIMECSR 0x00dc
643#define TIMECSR_US_COUNT FIELD32(0x000000ff)
644#define TIMECSR_US_64_COUNT FIELD32(0x0000ff00)
645#define TIMECSR_BEACON_EXPECT FIELD32(0x00070000)
646
647/*
648 * MACCSR0: MAC configuration register 0.
649 */
650#define MACCSR0 0x00e0
651
652/*
653 * MACCSR1: MAC configuration register 1.
654 * KICK_RX: Kick one-shot rx in one-shot rx mode.
655 * ONESHOT_RXMODE: Enable one-shot rx mode for debugging.
656 * BBPRX_RESET_MODE: Ralink bbp rx reset mode.
657 * AUTO_TXBBP: Auto tx logic access bbp control register.
658 * AUTO_RXBBP: Auto rx logic access bbp control register.
659 * LOOPBACK: Loopback mode. 0: normal, 1: internal, 2: external, 3:rsvd.
660 * INTERSIL_IF: Intersil if calibration pin.
661 */
662#define MACCSR1 0x00e4
663#define MACCSR1_KICK_RX FIELD32(0x00000001)
664#define MACCSR1_ONESHOT_RXMODE FIELD32(0x00000002)
665#define MACCSR1_BBPRX_RESET_MODE FIELD32(0x00000004)
666#define MACCSR1_AUTO_TXBBP FIELD32(0x00000008)
667#define MACCSR1_AUTO_RXBBP FIELD32(0x00000010)
668#define MACCSR1_LOOPBACK FIELD32(0x00000060)
669#define MACCSR1_INTERSIL_IF FIELD32(0x00000080)
670
671/*
672 * RALINKCSR: Ralink Rx auto-reset BBCR.
673 * AR_BBP_DATA#: Auto reset BBP register # data.
674 * AR_BBP_ID#: Auto reset BBP register # id.
675 */
676#define RALINKCSR 0x00e8
677#define RALINKCSR_AR_BBP_DATA0 FIELD32(0x000000ff)
678#define RALINKCSR_AR_BBP_ID0 FIELD32(0x00007f00)
679#define RALINKCSR_AR_BBP_VALID0 FIELD32(0x00008000)
680#define RALINKCSR_AR_BBP_DATA1 FIELD32(0x00ff0000)
681#define RALINKCSR_AR_BBP_ID1 FIELD32(0x7f000000)
682#define RALINKCSR_AR_BBP_VALID1 FIELD32(0x80000000)
683
684/*
685 * BCNCSR: Beacon interval control register.
686 * CHANGE: Write one to change beacon interval.
687 * DELTATIME: The delta time value.
688 * NUM_BEACON: Number of beacon according to mode.
689 * MODE: Please refer to asic specs.
690 * PLUS: Plus or minus delta time value.
691 */
692#define BCNCSR 0x00ec
693#define BCNCSR_CHANGE FIELD32(0x00000001)
694#define BCNCSR_DELTATIME FIELD32(0x0000001e)
695#define BCNCSR_NUM_BEACON FIELD32(0x00001fe0)
696#define BCNCSR_MODE FIELD32(0x00006000)
697#define BCNCSR_PLUS FIELD32(0x00008000)
698
699/*
700 * BBP / RF / IF Control Register.
701 */
702
703/*
704 * BBPCSR: BBP serial control register.
705 * VALUE: Register value to program into BBP.
706 * REGNUM: Selected BBP register.
707 * BUSY: 1: asic is busy execute BBP programming.
708 * WRITE_CONTROL: 1: write BBP, 0: read BBP.
709 */
710#define BBPCSR 0x00f0
711#define BBPCSR_VALUE FIELD32(0x000000ff)
712#define BBPCSR_REGNUM FIELD32(0x00007f00)
713#define BBPCSR_BUSY FIELD32(0x00008000)
714#define BBPCSR_WRITE_CONTROL FIELD32(0x00010000)
715
716/*
717 * RFCSR: RF serial control register.
718 * VALUE: Register value + id to program into rf/if.
719 * NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22).
720 * IF_SELECT: Chip to program: 0: rf, 1: if.
721 * PLL_LD: Rf pll_ld status.
722 * BUSY: 1: asic is busy execute rf programming.
723 */
724#define RFCSR 0x00f4
725#define RFCSR_VALUE FIELD32(0x00ffffff)
726#define RFCSR_NUMBER_OF_BITS FIELD32(0x1f000000)
727#define RFCSR_IF_SELECT FIELD32(0x20000000)
728#define RFCSR_PLL_LD FIELD32(0x40000000)
729#define RFCSR_BUSY FIELD32(0x80000000)
730
731/*
732 * LEDCSR: LED control register.
733 * ON_PERIOD: On period, default 70ms.
734 * OFF_PERIOD: Off period, default 30ms.
735 * LINK: 0: linkoff, 1: linkup.
736 * ACTIVITY: 0: idle, 1: active.
737 * LINK_POLARITY: 0: active low, 1: active high.
738 * ACTIVITY_POLARITY: 0: active low, 1: active high.
739 * LED_DEFAULT: LED state for "enable" 0: ON, 1: OFF.
740 */
741#define LEDCSR 0x00f8
742#define LEDCSR_ON_PERIOD FIELD32(0x000000ff)
743#define LEDCSR_OFF_PERIOD FIELD32(0x0000ff00)
744#define LEDCSR_LINK FIELD32(0x00010000)
745#define LEDCSR_ACTIVITY FIELD32(0x00020000)
746#define LEDCSR_LINK_POLARITY FIELD32(0x00040000)
747#define LEDCSR_ACTIVITY_POLARITY FIELD32(0x00080000)
748#define LEDCSR_LED_DEFAULT FIELD32(0x00100000)
749
750/*
751 * AES control register.
752 */
753#define SECCSR3 0x00fc
754
755/*
756 * ASIC pointer information.
757 * RXPTR: Current RX ring address.
758 * TXPTR: Current Tx ring address.
759 * PRIPTR: Current Priority ring address.
760 * ATIMPTR: Current ATIM ring address.
761 */
762#define RXPTR 0x0100
763#define TXPTR 0x0104
764#define PRIPTR 0x0108
765#define ATIMPTR 0x010c
766
767/*
768 * TXACKCSR0: TX ACK timeout.
769 */
770#define TXACKCSR0 0x0110
771
772/*
773 * ACK timeout count registers.
774 * ACKCNT0: TX ACK timeout count.
775 * ACKCNT1: RX ACK timeout count.
776 */
777#define ACKCNT0 0x0114
778#define ACKCNT1 0x0118
779
780/*
781 * GPIO and others.
782 */
783
784/*
785 * GPIOCSR: GPIO control register.
786 */
787#define GPIOCSR 0x0120
788#define GPIOCSR_BIT0 FIELD32(0x00000001)
789#define GPIOCSR_BIT1 FIELD32(0x00000002)
790#define GPIOCSR_BIT2 FIELD32(0x00000004)
791#define GPIOCSR_BIT3 FIELD32(0x00000008)
792#define GPIOCSR_BIT4 FIELD32(0x00000010)
793#define GPIOCSR_BIT5 FIELD32(0x00000020)
794#define GPIOCSR_BIT6 FIELD32(0x00000040)
795#define GPIOCSR_BIT7 FIELD32(0x00000080)
796#define GPIOCSR_DIR0 FIELD32(0x00000100)
797#define GPIOCSR_DIR1 FIELD32(0x00000200)
798#define GPIOCSR_DIR2 FIELD32(0x00000400)
799#define GPIOCSR_DIR3 FIELD32(0x00000800)
800#define GPIOCSR_DIR4 FIELD32(0x00001000)
801#define GPIOCSR_DIR5 FIELD32(0x00002000)
802#define GPIOCSR_DIR6 FIELD32(0x00004000)
803#define GPIOCSR_DIR7 FIELD32(0x00008000)
804
805/*
806 * FIFO pointer registers.
807 * FIFOCSR0: TX FIFO pointer.
808 * FIFOCSR1: RX FIFO pointer.
809 */
810#define FIFOCSR0 0x0128
811#define FIFOCSR1 0x012c
812
813/*
814 * BCNCSR1: Tx BEACON offset time control register.
815 * PRELOAD: Beacon timer offset in units of usec.
816 * BEACON_CWMIN: 2^CwMin.
817 */
818#define BCNCSR1 0x0130
819#define BCNCSR1_PRELOAD FIELD32(0x0000ffff)
820#define BCNCSR1_BEACON_CWMIN FIELD32(0x000f0000)
821
822/*
823 * MACCSR2: TX_PE to RX_PE turn-around time control register
824 * DELAY: RX_PE low width, in units of pci clock cycle.
825 */
826#define MACCSR2 0x0134
827#define MACCSR2_DELAY FIELD32(0x000000ff)
828
829/*
830 * TESTCSR: TEST mode selection register.
831 */
832#define TESTCSR 0x0138
833
834/*
835 * ARCSR2: 1 Mbps ACK/CTS PLCP.
836 */
837#define ARCSR2 0x013c
838#define ARCSR2_SIGNAL FIELD32(0x000000ff)
839#define ARCSR2_SERVICE FIELD32(0x0000ff00)
840#define ARCSR2_LENGTH FIELD32(0xffff0000)
841
842/*
843 * ARCSR3: 2 Mbps ACK/CTS PLCP.
844 */
845#define ARCSR3 0x0140
846#define ARCSR3_SIGNAL FIELD32(0x000000ff)
847#define ARCSR3_SERVICE FIELD32(0x0000ff00)
848#define ARCSR3_LENGTH FIELD32(0xffff0000)
849
850/*
851 * ARCSR4: 5.5 Mbps ACK/CTS PLCP.
852 */
853#define ARCSR4 0x0144
854#define ARCSR4_SIGNAL FIELD32(0x000000ff)
855#define ARCSR4_SERVICE FIELD32(0x0000ff00)
856#define ARCSR4_LENGTH FIELD32(0xffff0000)
857
858/*
859 * ARCSR5: 11 Mbps ACK/CTS PLCP.
860 */
861#define ARCSR5 0x0148
862#define ARCSR5_SIGNAL FIELD32(0x000000ff)
863#define ARCSR5_SERVICE FIELD32(0x0000ff00)
864#define ARCSR5_LENGTH FIELD32(0xffff0000)
865
866/*
867 * ARTCSR0: CCK ACK/CTS payload consumed time for 1/2/5.5/11 mbps.
868 */
869#define ARTCSR0 0x014c
870#define ARTCSR0_ACK_CTS_11MBS FIELD32(0x000000ff)
871#define ARTCSR0_ACK_CTS_5_5MBS FIELD32(0x0000ff00)
872#define ARTCSR0_ACK_CTS_2MBS FIELD32(0x00ff0000)
873#define ARTCSR0_ACK_CTS_1MBS FIELD32(0xff000000)
874
875
876/*
877 * ARTCSR1: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps.
878 */
879#define ARTCSR1 0x0150
880#define ARTCSR1_ACK_CTS_6MBS FIELD32(0x000000ff)
881#define ARTCSR1_ACK_CTS_9MBS FIELD32(0x0000ff00)
882#define ARTCSR1_ACK_CTS_12MBS FIELD32(0x00ff0000)
883#define ARTCSR1_ACK_CTS_18MBS FIELD32(0xff000000)
884
885/*
886 * ARTCSR2: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps.
887 */
888#define ARTCSR2 0x0154
889#define ARTCSR2_ACK_CTS_24MBS FIELD32(0x000000ff)
890#define ARTCSR2_ACK_CTS_36MBS FIELD32(0x0000ff00)
891#define ARTCSR2_ACK_CTS_48MBS FIELD32(0x00ff0000)
892#define ARTCSR2_ACK_CTS_54MBS FIELD32(0xff000000)
893
894/*
895 * SECCSR1_RT2509: WEP control register.
896 * KICK_ENCRYPT: Kick encryption engine, self-clear.
897 * ONE_SHOT: 0: ring mode, 1: One shot only mode.
898 * DESC_ADDRESS: Descriptor physical address of frame.
899 */
900#define SECCSR1 0x0158
901#define SECCSR1_KICK_ENCRYPT FIELD32(0x00000001)
902#define SECCSR1_ONE_SHOT FIELD32(0x00000002)
903#define SECCSR1_DESC_ADDRESS FIELD32(0xfffffffc)
904
905/*
906 * BBPCSR1: BBP TX configuration.
907 */
908#define BBPCSR1 0x015c
909#define BBPCSR1_CCK FIELD32(0x00000003)
910#define BBPCSR1_CCK_FLIP FIELD32(0x00000004)
911#define BBPCSR1_OFDM FIELD32(0x00030000)
912#define BBPCSR1_OFDM_FLIP FIELD32(0x00040000)
913
914/*
915 * Dual band configuration registers.
916 * DBANDCSR0: Dual band configuration register 0.
917 * DBANDCSR1: Dual band configuration register 1.
918 */
919#define DBANDCSR0 0x0160
920#define DBANDCSR1 0x0164
921
922/*
923 * BBPPCSR: BBP Pin control register.
924 */
925#define BBPPCSR 0x0168
926
927/*
928 * MAC special debug mode selection registers.
929 * DBGSEL0: MAC special debug mode selection register 0.
930 * DBGSEL1: MAC special debug mode selection register 1.
931 */
932#define DBGSEL0 0x016c
933#define DBGSEL1 0x0170
934
935/*
936 * BISTCSR: BBP BIST register.
937 */
938#define BISTCSR 0x0174
939
940/*
941 * Multicast filter registers.
942 * MCAST0: Multicast filter register 0.
943 * MCAST1: Multicast filter register 1.
944 */
945#define MCAST0 0x0178
946#define MCAST1 0x017c
947
948/*
949 * UART registers.
950 * UARTCSR0: UART1 TX register.
951 * UARTCSR1: UART1 RX register.
952 * UARTCSR3: UART1 frame control register.
953 * UARTCSR4: UART1 buffer control register.
954 * UART2CSR0: UART2 TX register.
955 * UART2CSR1: UART2 RX register.
956 * UART2CSR3: UART2 frame control register.
957 * UART2CSR4: UART2 buffer control register.
958 */
959#define UARTCSR0 0x0180
960#define UARTCSR1 0x0184
961#define UARTCSR3 0x0188
962#define UARTCSR4 0x018c
963#define UART2CSR0 0x0190
964#define UART2CSR1 0x0194
965#define UART2CSR3 0x0198
966#define UART2CSR4 0x019c
967
968/*
969 * BBP registers.
970 * The wordsize of the BBP is 8 bits.
971 */
972
973/*
974 * R2: TX antenna control
975 */
976#define BBP_R2_TX_ANTENNA FIELD8(0x03)
977#define BBP_R2_TX_IQ_FLIP FIELD8(0x04)
978
979/*
980 * R14: RX antenna control
981 */
982#define BBP_R14_RX_ANTENNA FIELD8(0x03)
983#define BBP_R14_RX_IQ_FLIP FIELD8(0x04)
984
985/*
986 * BBP_R70
987 */
988#define BBP_R70_JAPAN_FILTER FIELD8(0x08)
989
990/*
991 * RF registers
992 */
993
994/*
995 * RF 1
996 */
997#define RF1_TUNER FIELD32(0x00020000)
998
999/*
1000 * RF 3
1001 */
1002#define RF3_TUNER FIELD32(0x00000100)
1003#define RF3_TXPOWER FIELD32(0x00003e00)
1004
1005/*
1006 * EEPROM content.
1007 * The wordsize of the EEPROM is 16 bits.
1008 */
1009
1010/*
1011 * HW MAC address.
1012 */
1013#define EEPROM_MAC_ADDR_0 0x0002
1014#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
1015#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
1016#define EEPROM_MAC_ADDR1 0x0003
1017#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
1018#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
1019#define EEPROM_MAC_ADDR_2 0x0004
1020#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
1021#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
1022
1023/*
1024 * EEPROM antenna.
1025 * ANTENNA_NUM: Number of antenna's.
1026 * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1027 * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1028 * LED_MODE: 0: default, 1: TX/RX activity,2: Single (ignore link), 3: rsvd.
1029 * DYN_TXAGC: Dynamic TX AGC control.
1030 * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
1031 * RF_TYPE: Rf_type of this adapter.
1032 */
1033#define EEPROM_ANTENNA 0x10
1034#define EEPROM_ANTENNA_NUM FIELD16(0x0003)
1035#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
1036#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
1037#define EEPROM_ANTENNA_LED_MODE FIELD16(0x01c0)
1038#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200)
1039#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
1040#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800)
1041
1042/*
1043 * EEPROM NIC config.
1044 * CARDBUS_ACCEL: 0: enable, 1: disable.
1045 * DYN_BBP_TUNE: 0: enable, 1: disable.
1046 * CCK_TX_POWER: CCK TX power compensation.
1047 */
1048#define EEPROM_NIC 0x11
1049#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0001)
1050#define EEPROM_NIC_DYN_BBP_TUNE FIELD16(0x0002)
1051#define EEPROM_NIC_CCK_TX_POWER FIELD16(0x000c)
1052
1053/*
1054 * EEPROM geography.
1055 * GEO: Default geography setting for device.
1056 */
1057#define EEPROM_GEOGRAPHY 0x12
1058#define EEPROM_GEOGRAPHY_GEO FIELD16(0x0f00)
1059
1060/*
1061 * EEPROM BBP.
1062 */
1063#define EEPROM_BBP_START 0x13
1064#define EEPROM_BBP_SIZE 16
1065#define EEPROM_BBP_VALUE FIELD16(0x00ff)
1066#define EEPROM_BBP_REG_ID FIELD16(0xff00)
1067
1068/*
1069 * EEPROM TXPOWER
1070 */
1071#define EEPROM_TXPOWER_START 0x23
1072#define EEPROM_TXPOWER_SIZE 7
1073#define EEPROM_TXPOWER_1 FIELD16(0x00ff)
1074#define EEPROM_TXPOWER_2 FIELD16(0xff00)
1075
1076/*
1077 * RSSI <-> dBm offset calibration
1078 */
1079#define EEPROM_CALIBRATE_OFFSET 0x3e
1080#define EEPROM_CALIBRATE_OFFSET_RSSI FIELD16(0x00ff)
1081
1082/*
1083 * DMA descriptor defines.
1084 */
1085#define TXD_DESC_SIZE ( 11 * sizeof(struct data_desc) )
1086#define RXD_DESC_SIZE ( 11 * sizeof(struct data_desc) )
1087
1088/*
1089 * TX descriptor format for TX, PRIO, ATIM and Beacon Ring.
1090 */
1091
1092/*
1093 * Word0
1094 */
1095#define TXD_W0_OWNER_NIC FIELD32(0x00000001)
1096#define TXD_W0_VALID FIELD32(0x00000002)
1097#define TXD_W0_RESULT FIELD32(0x0000001c)
1098#define TXD_W0_RETRY_COUNT FIELD32(0x000000e0)
1099#define TXD_W0_MORE_FRAG FIELD32(0x00000100)
1100#define TXD_W0_ACK FIELD32(0x00000200)
1101#define TXD_W0_TIMESTAMP FIELD32(0x00000400)
1102#define TXD_W0_OFDM FIELD32(0x00000800)
1103#define TXD_W0_CIPHER_OWNER FIELD32(0x00001000)
1104#define TXD_W0_IFS FIELD32(0x00006000)
1105#define TXD_W0_RETRY_MODE FIELD32(0x00008000)
1106#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1107#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1108
1109/*
1110 * Word1
1111 */
1112#define TXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff)
1113
1114/*
1115 * Word2
1116 */
1117#define TXD_W2_IV_OFFSET FIELD32(0x0000003f)
1118#define TXD_W2_AIFS FIELD32(0x000000c0)
1119#define TXD_W2_CWMIN FIELD32(0x00000f00)
1120#define TXD_W2_CWMAX FIELD32(0x0000f000)
1121
1122/*
1123 * Word3: PLCP information
1124 */
1125#define TXD_W3_PLCP_SIGNAL FIELD32(0x000000ff)
1126#define TXD_W3_PLCP_SERVICE FIELD32(0x0000ff00)
1127#define TXD_W3_PLCP_LENGTH_LOW FIELD32(0x00ff0000)
1128#define TXD_W3_PLCP_LENGTH_HIGH FIELD32(0xff000000)
1129
1130/*
1131 * Word4
1132 */
1133#define TXD_W4_IV FIELD32(0xffffffff)
1134
1135/*
1136 * Word5
1137 */
1138#define TXD_W5_EIV FIELD32(0xffffffff)
1139
1140/*
1141 * Word6-9: Key
1142 */
1143#define TXD_W6_KEY FIELD32(0xffffffff)
1144#define TXD_W7_KEY FIELD32(0xffffffff)
1145#define TXD_W8_KEY FIELD32(0xffffffff)
1146#define TXD_W9_KEY FIELD32(0xffffffff)
1147
1148/*
1149 * Word10
1150 */
1151#define TXD_W10_RTS FIELD32(0x00000001)
1152#define TXD_W10_TX_RATE FIELD32(0x000000fe)
1153
1154/*
1155 * RX descriptor format for RX Ring.
1156 */
1157
1158/*
1159 * Word0
1160 */
1161#define RXD_W0_OWNER_NIC FIELD32(0x00000001)
1162#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002)
1163#define RXD_W0_MULTICAST FIELD32(0x00000004)
1164#define RXD_W0_BROADCAST FIELD32(0x00000008)
1165#define RXD_W0_MY_BSS FIELD32(0x00000010)
1166#define RXD_W0_CRC_ERROR FIELD32(0x00000020)
1167#define RXD_W0_OFDM FIELD32(0x00000040)
1168#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080)
1169#define RXD_W0_CIPHER_OWNER FIELD32(0x00000100)
1170#define RXD_W0_ICV_ERROR FIELD32(0x00000200)
1171#define RXD_W0_IV_OFFSET FIELD32(0x0000fc00)
1172#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1173#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1174
1175/*
1176 * Word1
1177 */
1178#define RXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff)
1179
1180/*
1181 * Word2
1182 */
1183#define RXD_W2_SIGNAL FIELD32(0x000000ff)
1184#define RXD_W2_RSSI FIELD32(0x0000ff00)
1185#define RXD_W2_TA FIELD32(0xffff0000)
1186
1187/*
1188 * Word3
1189 */
1190#define RXD_W3_TA FIELD32(0xffffffff)
1191
1192/*
1193 * Word4
1194 */
1195#define RXD_W4_IV FIELD32(0xffffffff)
1196
1197/*
1198 * Word5
1199 */
1200#define RXD_W5_EIV FIELD32(0xffffffff)
1201
1202/*
1203 * Word6-9: Key
1204 */
1205#define RXD_W6_KEY FIELD32(0xffffffff)
1206#define RXD_W7_KEY FIELD32(0xffffffff)
1207#define RXD_W8_KEY FIELD32(0xffffffff)
1208#define RXD_W9_KEY FIELD32(0xffffffff)
1209
1210/*
1211 * Word10
1212 */
1213#define RXD_W10_DROP FIELD32(0x00000001)
1214
1215/*
1216 * Macro's for converting txpower from EEPROM to dscape value
1217 * and from dscape value to register value.
1218 */
1219#define MIN_TXPOWER 0
1220#define MAX_TXPOWER 31
1221#define DEFAULT_TXPOWER 24
1222
1223#define TXPOWER_FROM_DEV(__txpower) \
1224({ \
1225 ((__txpower) > MAX_TXPOWER) ? \
1226 DEFAULT_TXPOWER : (__txpower); \
1227})
1228
1229#define TXPOWER_TO_DEV(__txpower) \
1230({ \
1231 ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
1232 (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
1233 (__txpower)); \
1234})
1235
1236#endif /* RT2500PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
new file mode 100644
index 000000000000..847bd7f58eed
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -0,0 +1,1837 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2500usb
23 Abstract: rt2500usb device specific routines.
24 Supported chipsets: RT2570.
25 */
26
27/*
28 * Set enviroment defines for rt2x00.h
29 */
30#define DRV_NAME "rt2500usb"
31
32#include <linux/delay.h>
33#include <linux/etherdevice.h>
34#include <linux/init.h>
35#include <linux/kernel.h>
36#include <linux/module.h>
37#include <linux/usb.h>
38
39#include "rt2x00.h"
40#include "rt2x00usb.h"
41#include "rt2500usb.h"
42
43/*
44 * Register access.
45 * All access to the CSR registers will go through the methods
46 * rt2500usb_register_read and rt2500usb_register_write.
47 * BBP and RF register require indirect register access,
48 * and use the CSR registers BBPCSR and RFCSR to achieve this.
49 * These indirect registers work with busy bits,
50 * and we will try maximal REGISTER_BUSY_COUNT times to access
51 * the register while taking a REGISTER_BUSY_DELAY us delay
52 * between each attampt. When the busy bit is still set at that time,
53 * the access attempt is considered to have failed,
54 * and we will print an error.
55 */
56static inline void rt2500usb_register_read(const struct rt2x00_dev *rt2x00dev,
57 const unsigned int offset,
58 u16 *value)
59{
60 __le16 reg;
61 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
62 USB_VENDOR_REQUEST_IN, offset,
63 &reg, sizeof(u16), REGISTER_TIMEOUT);
64 *value = le16_to_cpu(reg);
65}
66
67static inline void rt2500usb_register_multiread(const struct rt2x00_dev
68 *rt2x00dev,
69 const unsigned int offset,
70 void *value, const u16 length)
71{
72 int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
73 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
74 USB_VENDOR_REQUEST_IN, offset,
75 value, length, timeout);
76}
77
78static inline void rt2500usb_register_write(const struct rt2x00_dev *rt2x00dev,
79 const unsigned int offset,
80 u16 value)
81{
82 __le16 reg = cpu_to_le16(value);
83 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
84 USB_VENDOR_REQUEST_OUT, offset,
85 &reg, sizeof(u16), REGISTER_TIMEOUT);
86}
87
88static inline void rt2500usb_register_multiwrite(const struct rt2x00_dev
89 *rt2x00dev,
90 const unsigned int offset,
91 void *value, const u16 length)
92{
93 int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
94 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
95 USB_VENDOR_REQUEST_OUT, offset,
96 value, length, timeout);
97}
98
99static u16 rt2500usb_bbp_check(const struct rt2x00_dev *rt2x00dev)
100{
101 u16 reg;
102 unsigned int i;
103
104 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
105 rt2500usb_register_read(rt2x00dev, PHY_CSR8, &reg);
106 if (!rt2x00_get_field16(reg, PHY_CSR8_BUSY))
107 break;
108 udelay(REGISTER_BUSY_DELAY);
109 }
110
111 return reg;
112}
113
114static void rt2500usb_bbp_write(const struct rt2x00_dev *rt2x00dev,
115 const unsigned int word, const u8 value)
116{
117 u16 reg;
118
119 /*
120 * Wait until the BBP becomes ready.
121 */
122 reg = rt2500usb_bbp_check(rt2x00dev);
123 if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
124 ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
125 return;
126 }
127
128 /*
129 * Write the data into the BBP.
130 */
131 reg = 0;
132 rt2x00_set_field16(&reg, PHY_CSR7_DATA, value);
133 rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
134 rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 0);
135
136 rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg);
137}
138
139static void rt2500usb_bbp_read(const struct rt2x00_dev *rt2x00dev,
140 const unsigned int word, u8 *value)
141{
142 u16 reg;
143
144 /*
145 * Wait until the BBP becomes ready.
146 */
147 reg = rt2500usb_bbp_check(rt2x00dev);
148 if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
149 ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
150 return;
151 }
152
153 /*
154 * Write the request into the BBP.
155 */
156 reg = 0;
157 rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
158 rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 1);
159
160 rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg);
161
162 /*
163 * Wait until the BBP becomes ready.
164 */
165 reg = rt2500usb_bbp_check(rt2x00dev);
166 if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
167 ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
168 *value = 0xff;
169 return;
170 }
171
172 rt2500usb_register_read(rt2x00dev, PHY_CSR7, &reg);
173 *value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
174}
175
176static void rt2500usb_rf_write(const struct rt2x00_dev *rt2x00dev,
177 const unsigned int word, const u32 value)
178{
179 u16 reg;
180 unsigned int i;
181
182 if (!word)
183 return;
184
185 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
186 rt2500usb_register_read(rt2x00dev, PHY_CSR10, &reg);
187 if (!rt2x00_get_field16(reg, PHY_CSR10_RF_BUSY))
188 goto rf_write;
189 udelay(REGISTER_BUSY_DELAY);
190 }
191
192 ERROR(rt2x00dev, "PHY_CSR10 register busy. Write failed.\n");
193 return;
194
195rf_write:
196 reg = 0;
197 rt2x00_set_field16(&reg, PHY_CSR9_RF_VALUE, value);
198 rt2500usb_register_write(rt2x00dev, PHY_CSR9, reg);
199
200 reg = 0;
201 rt2x00_set_field16(&reg, PHY_CSR10_RF_VALUE, value >> 16);
202 rt2x00_set_field16(&reg, PHY_CSR10_RF_NUMBER_OF_BITS, 20);
203 rt2x00_set_field16(&reg, PHY_CSR10_RF_IF_SELECT, 0);
204 rt2x00_set_field16(&reg, PHY_CSR10_RF_BUSY, 1);
205
206 rt2500usb_register_write(rt2x00dev, PHY_CSR10, reg);
207 rt2x00_rf_write(rt2x00dev, word, value);
208}
209
210#ifdef CONFIG_RT2X00_LIB_DEBUGFS
211#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u16)) )
212
213static void rt2500usb_read_csr(const struct rt2x00_dev *rt2x00dev,
214 const unsigned int word, u32 *data)
215{
216 rt2500usb_register_read(rt2x00dev, CSR_OFFSET(word), (u16 *) data);
217}
218
219static void rt2500usb_write_csr(const struct rt2x00_dev *rt2x00dev,
220 const unsigned int word, u32 data)
221{
222 rt2500usb_register_write(rt2x00dev, CSR_OFFSET(word), data);
223}
224
225static const struct rt2x00debug rt2500usb_rt2x00debug = {
226 .owner = THIS_MODULE,
227 .csr = {
228 .read = rt2500usb_read_csr,
229 .write = rt2500usb_write_csr,
230 .word_size = sizeof(u16),
231 .word_count = CSR_REG_SIZE / sizeof(u16),
232 },
233 .eeprom = {
234 .read = rt2x00_eeprom_read,
235 .write = rt2x00_eeprom_write,
236 .word_size = sizeof(u16),
237 .word_count = EEPROM_SIZE / sizeof(u16),
238 },
239 .bbp = {
240 .read = rt2500usb_bbp_read,
241 .write = rt2500usb_bbp_write,
242 .word_size = sizeof(u8),
243 .word_count = BBP_SIZE / sizeof(u8),
244 },
245 .rf = {
246 .read = rt2x00_rf_read,
247 .write = rt2500usb_rf_write,
248 .word_size = sizeof(u32),
249 .word_count = RF_SIZE / sizeof(u32),
250 },
251};
252#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
253
254/*
255 * Configuration handlers.
256 */
257static void rt2500usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr)
258{
259 __le16 reg[3];
260
261 memset(&reg, 0, sizeof(reg));
262 memcpy(&reg, addr, ETH_ALEN);
263
264 /*
265 * The MAC address is passed to us as an array of bytes,
266 * that array is little endian, so no need for byte ordering.
267 */
268 rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, &reg, sizeof(reg));
269}
270
271static void rt2500usb_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
272{
273 __le16 reg[3];
274
275 memset(&reg, 0, sizeof(reg));
276 memcpy(&reg, bssid, ETH_ALEN);
277
278 /*
279 * The BSSID is passed to us as an array of bytes,
280 * that array is little endian, so no need for byte ordering.
281 */
282 rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, &reg, sizeof(reg));
283}
284
285static void rt2500usb_config_packet_filter(struct rt2x00_dev *rt2x00dev,
286 const unsigned int filter)
287{
288 int promisc = !!(filter & IFF_PROMISC);
289 int multicast = !!(filter & IFF_MULTICAST);
290 int broadcast = !!(filter & IFF_BROADCAST);
291 u16 reg;
292
293 rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
294 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_NOT_TO_ME, !promisc);
295 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_MULTICAST, !multicast);
296 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_BROADCAST, !broadcast);
297 rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
298}
299
300static void rt2500usb_config_type(struct rt2x00_dev *rt2x00dev, const int type)
301{
302 u16 reg;
303
304 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
305
306 /*
307 * Apply hardware packet filter.
308 */
309 rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
310
311 if (!is_monitor_present(&rt2x00dev->interface) &&
312 (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
313 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_TODS, 1);
314 else
315 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_TODS, 0);
316
317 /*
318 * If there is a non-monitor interface present
319 * the packet should be strict (even if a monitor interface is present!).
320 * When there is only 1 interface present which is in monitor mode
321 * we should start accepting _all_ frames.
322 */
323 if (is_interface_present(&rt2x00dev->interface)) {
324 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CRC, 1);
325 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_PHYSICAL, 1);
326 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CONTROL, 1);
327 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_VERSION_ERROR, 1);
328 } else if (is_monitor_present(&rt2x00dev->interface)) {
329 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CRC, 0);
330 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_PHYSICAL, 0);
331 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CONTROL, 0);
332 rt2x00_set_field16(&reg, TXRX_CSR2_DROP_VERSION_ERROR, 0);
333 }
334
335 rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
336
337 /*
338 * Enable beacon config
339 */
340 rt2500usb_register_read(rt2x00dev, TXRX_CSR20, &reg);
341 rt2x00_set_field16(&reg, TXRX_CSR20_OFFSET,
342 (PREAMBLE + get_duration(IEEE80211_HEADER, 2)) >> 6);
343 if (type == IEEE80211_IF_TYPE_STA)
344 rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW, 0);
345 else
346 rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW, 2);
347 rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg);
348
349 /*
350 * Enable synchronisation.
351 */
352 rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
353 rt2x00_set_field16(&reg, TXRX_CSR18_OFFSET, 0);
354 rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
355
356 rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
357 if (is_interface_present(&rt2x00dev->interface)) {
358 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
359 rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
360 }
361
362 rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
363 if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
364 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, 2);
365 else if (type == IEEE80211_IF_TYPE_STA)
366 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, 1);
367 else if (is_monitor_present(&rt2x00dev->interface) &&
368 !is_interface_present(&rt2x00dev->interface))
369 rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, 0);
370
371 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
372}
373
374static void rt2500usb_config_rate(struct rt2x00_dev *rt2x00dev, const int rate)
375{
376 struct ieee80211_conf *conf = &rt2x00dev->hw->conf;
377 u16 reg;
378 u16 value;
379 u16 preamble;
380
381 if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE))
382 preamble = SHORT_PREAMBLE;
383 else
384 preamble = PREAMBLE;
385
386 reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK;
387
388 rt2500usb_register_write(rt2x00dev, TXRX_CSR11, reg);
389
390 rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
391 value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ?
392 SHORT_DIFS : DIFS) +
393 PLCP + preamble + get_duration(ACK_SIZE, 10);
394 rt2x00_set_field16(&reg, TXRX_CSR1_ACK_TIMEOUT, value);
395 rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
396
397 rt2500usb_register_read(rt2x00dev, TXRX_CSR10, &reg);
398 if (preamble == SHORT_PREAMBLE)
399 rt2x00_set_field16(&reg, TXRX_CSR10_AUTORESPOND_PREAMBLE, 1);
400 else
401 rt2x00_set_field16(&reg, TXRX_CSR10_AUTORESPOND_PREAMBLE, 0);
402 rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg);
403}
404
405static void rt2500usb_config_phymode(struct rt2x00_dev *rt2x00dev,
406 const int phymode)
407{
408 struct ieee80211_hw_mode *mode;
409 struct ieee80211_rate *rate;
410
411 if (phymode == MODE_IEEE80211A)
412 rt2x00dev->curr_hwmode = HWMODE_A;
413 else if (phymode == MODE_IEEE80211B)
414 rt2x00dev->curr_hwmode = HWMODE_B;
415 else
416 rt2x00dev->curr_hwmode = HWMODE_G;
417
418 mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
419 rate = &mode->rates[mode->num_rates - 1];
420
421 rt2500usb_config_rate(rt2x00dev, rate->val2);
422
423 if (phymode == MODE_IEEE80211B) {
424 rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x000b);
425 rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x0040);
426 } else {
427 rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0005);
428 rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x016c);
429 }
430}
431
432static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev,
433 const int index, const int channel,
434 const int txpower)
435{
436 struct rf_channel reg;
437
438 /*
439 * Fill rf_reg structure.
440 */
441 memcpy(&reg, &rt2x00dev->spec.channels[index], sizeof(reg));
442
443 /*
444 * Set TXpower.
445 */
446 rt2x00_set_field32(&reg.rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
447
448 /*
449 * For RT2525E we should first set the channel to half band higher.
450 */
451 if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
452 static const u32 vals[] = {
453 0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
454 0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
455 0x000008ba, 0x000008be, 0x000008b7, 0x00000902,
456 0x00000902, 0x00000906
457 };
458
459 rt2500usb_rf_write(rt2x00dev, 2, vals[channel - 1]);
460 if (reg.rf4)
461 rt2500usb_rf_write(rt2x00dev, 4, reg.rf4);
462 }
463
464 rt2500usb_rf_write(rt2x00dev, 1, reg.rf1);
465 rt2500usb_rf_write(rt2x00dev, 2, reg.rf2);
466 rt2500usb_rf_write(rt2x00dev, 3, reg.rf3);
467 if (reg.rf4)
468 rt2500usb_rf_write(rt2x00dev, 4, reg.rf4);
469}
470
471static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev,
472 const int txpower)
473{
474 u32 rf3;
475
476 rt2x00_rf_read(rt2x00dev, 3, &rf3);
477 rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
478 rt2500usb_rf_write(rt2x00dev, 3, rf3);
479}
480
481static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev,
482 const int antenna_tx, const int antenna_rx)
483{
484 u8 r2;
485 u8 r14;
486 u16 csr5;
487 u16 csr6;
488
489 rt2500usb_bbp_read(rt2x00dev, 2, &r2);
490 rt2500usb_bbp_read(rt2x00dev, 14, &r14);
491 rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5);
492 rt2500usb_register_read(rt2x00dev, PHY_CSR6, &csr6);
493
494 /*
495 * Configure the TX antenna.
496 */
497 switch (antenna_tx) {
498 case ANTENNA_SW_DIVERSITY:
499 case ANTENNA_HW_DIVERSITY:
500 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1);
501 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1);
502 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 1);
503 break;
504 case ANTENNA_A:
505 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
506 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0);
507 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0);
508 break;
509 case ANTENNA_B:
510 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
511 rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2);
512 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2);
513 break;
514 }
515
516 /*
517 * Configure the RX antenna.
518 */
519 switch (antenna_rx) {
520 case ANTENNA_SW_DIVERSITY:
521 case ANTENNA_HW_DIVERSITY:
522 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1);
523 break;
524 case ANTENNA_A:
525 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
526 break;
527 case ANTENNA_B:
528 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
529 break;
530 }
531
532 /*
533 * RT2525E and RT5222 need to flip TX I/Q
534 */
535 if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
536 rt2x00_rf(&rt2x00dev->chip, RF5222)) {
537 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
538 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1);
539 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1);
540
541 /*
542 * RT2525E does not need RX I/Q Flip.
543 */
544 if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
545 rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
546 } else {
547 rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0);
548 rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 0);
549 }
550
551 rt2500usb_bbp_write(rt2x00dev, 2, r2);
552 rt2500usb_bbp_write(rt2x00dev, 14, r14);
553 rt2500usb_register_write(rt2x00dev, PHY_CSR5, csr5);
554 rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6);
555}
556
557static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev,
558 const int short_slot_time,
559 const int beacon_int)
560{
561 u16 reg;
562
563 rt2500usb_register_write(rt2x00dev, MAC_CSR10,
564 short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME);
565
566 rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
567 rt2x00_set_field16(&reg, TXRX_CSR18_INTERVAL, beacon_int * 4);
568 rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
569}
570
571static void rt2500usb_config(struct rt2x00_dev *rt2x00dev,
572 const unsigned int flags,
573 struct ieee80211_conf *conf)
574{
575 int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME;
576
577 if (flags & CONFIG_UPDATE_PHYMODE)
578 rt2500usb_config_phymode(rt2x00dev, conf->phymode);
579 if (flags & CONFIG_UPDATE_CHANNEL)
580 rt2500usb_config_channel(rt2x00dev, conf->channel_val,
581 conf->channel, conf->power_level);
582 if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
583 rt2500usb_config_txpower(rt2x00dev, conf->power_level);
584 if (flags & CONFIG_UPDATE_ANTENNA)
585 rt2500usb_config_antenna(rt2x00dev, conf->antenna_sel_tx,
586 conf->antenna_sel_rx);
587 if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
588 rt2500usb_config_duration(rt2x00dev, short_slot_time,
589 conf->beacon_int);
590}
591
592/*
593 * LED functions.
594 */
595static void rt2500usb_enable_led(struct rt2x00_dev *rt2x00dev)
596{
597 u16 reg;
598
599 rt2500usb_register_read(rt2x00dev, MAC_CSR21, &reg);
600 rt2x00_set_field16(&reg, MAC_CSR21_ON_PERIOD, 70);
601 rt2x00_set_field16(&reg, MAC_CSR21_OFF_PERIOD, 30);
602 rt2500usb_register_write(rt2x00dev, MAC_CSR21, reg);
603
604 rt2500usb_register_read(rt2x00dev, MAC_CSR20, &reg);
605
606 if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) {
607 rt2x00_set_field16(&reg, MAC_CSR20_LINK, 1);
608 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, 0);
609 } else if (rt2x00dev->led_mode == LED_MODE_ASUS) {
610 rt2x00_set_field16(&reg, MAC_CSR20_LINK, 0);
611 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, 1);
612 } else {
613 rt2x00_set_field16(&reg, MAC_CSR20_LINK, 1);
614 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, 1);
615 }
616
617 rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg);
618}
619
620static void rt2500usb_disable_led(struct rt2x00_dev *rt2x00dev)
621{
622 u16 reg;
623
624 rt2500usb_register_read(rt2x00dev, MAC_CSR20, &reg);
625 rt2x00_set_field16(&reg, MAC_CSR20_LINK, 0);
626 rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, 0);
627 rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg);
628}
629
630/*
631 * Link tuning
632 */
633static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev)
634{
635 u16 reg;
636
637 /*
638 * Update FCS error count from register.
639 */
640 rt2500usb_register_read(rt2x00dev, STA_CSR0, &reg);
641 rt2x00dev->link.rx_failed = rt2x00_get_field16(reg, STA_CSR0_FCS_ERROR);
642
643 /*
644 * Update False CCA count from register.
645 */
646 rt2500usb_register_read(rt2x00dev, STA_CSR3, &reg);
647 rt2x00dev->link.false_cca =
648 rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR);
649}
650
651static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
652{
653 u16 eeprom;
654 u16 value;
655
656 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &eeprom);
657 value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R24_LOW);
658 rt2500usb_bbp_write(rt2x00dev, 24, value);
659
660 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &eeprom);
661 value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R25_LOW);
662 rt2500usb_bbp_write(rt2x00dev, 25, value);
663
664 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &eeprom);
665 value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R61_LOW);
666 rt2500usb_bbp_write(rt2x00dev, 61, value);
667
668 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &eeprom);
669 value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER);
670 rt2500usb_bbp_write(rt2x00dev, 17, value);
671
672 rt2x00dev->link.vgc_level = value;
673}
674
675static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev)
676{
677 int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
678 u16 bbp_thresh;
679 u16 vgc_bound;
680 u16 sens;
681 u16 r24;
682 u16 r25;
683 u16 r61;
684 u16 r17_sens;
685 u8 r17;
686 u8 up_bound;
687 u8 low_bound;
688
689 /*
690 * Determine the BBP tuning threshold and correctly
691 * set BBP 24, 25 and 61.
692 */
693 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh);
694 bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD);
695
696 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24);
697 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25);
698 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61);
699
700 if ((rssi + bbp_thresh) > 0) {
701 r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH);
702 r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH);
703 r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH);
704 } else {
705 r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW);
706 r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW);
707 r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW);
708 }
709
710 rt2500usb_bbp_write(rt2x00dev, 24, r24);
711 rt2500usb_bbp_write(rt2x00dev, 25, r25);
712 rt2500usb_bbp_write(rt2x00dev, 61, r61);
713
714 /*
715 * Read current r17 value, as well as the sensitivity values
716 * for the r17 register.
717 */
718 rt2500usb_bbp_read(rt2x00dev, 17, &r17);
719 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens);
720
721 /*
722 * A too low RSSI will cause too much false CCA which will
723 * then corrupt the R17 tuning. To remidy this the tuning should
724 * be stopped (While making sure the R17 value will not exceed limits)
725 */
726 if (rssi >= -40) {
727 if (r17 != 0x60)
728 rt2500usb_bbp_write(rt2x00dev, 17, 0x60);
729 return;
730 }
731
732 /*
733 * Special big-R17 for short distance
734 */
735 if (rssi >= -58) {
736 sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW);
737 if (r17 != sens)
738 rt2500usb_bbp_write(rt2x00dev, 17, sens);
739 return;
740 }
741
742 /*
743 * Special mid-R17 for middle distance
744 */
745 if (rssi >= -74) {
746 sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH);
747 if (r17 != sens)
748 rt2500usb_bbp_write(rt2x00dev, 17, sens);
749 return;
750 }
751
752 /*
753 * Leave short or middle distance condition, restore r17
754 * to the dynamic tuning range.
755 */
756 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound);
757 vgc_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER);
758
759 low_bound = 0x32;
760 if (rssi >= -77)
761 up_bound = vgc_bound;
762 else
763 up_bound = vgc_bound - (-77 - rssi);
764
765 if (up_bound < low_bound)
766 up_bound = low_bound;
767
768 if (r17 > up_bound) {
769 rt2500usb_bbp_write(rt2x00dev, 17, up_bound);
770 rt2x00dev->link.vgc_level = up_bound;
771 } else if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) {
772 rt2500usb_bbp_write(rt2x00dev, 17, ++r17);
773 rt2x00dev->link.vgc_level = r17;
774 } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) {
775 rt2500usb_bbp_write(rt2x00dev, 17, --r17);
776 rt2x00dev->link.vgc_level = r17;
777 }
778}
779
780/*
781 * Initialization functions.
782 */
783static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
784{
785 u16 reg;
786
787 rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0x0001,
788 USB_MODE_TEST, REGISTER_TIMEOUT);
789 rt2x00usb_vendor_request_sw(rt2x00dev, USB_SINGLE_WRITE, 0x0308,
790 0x00f0, REGISTER_TIMEOUT);
791
792 rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
793 rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX, 1);
794 rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
795
796 rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x1111);
797 rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x1e11);
798
799 rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
800 rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 1);
801 rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 1);
802 rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
803 rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
804
805 rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
806 rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
807 rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
808 rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
809 rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
810
811 rt2500usb_register_read(rt2x00dev, TXRX_CSR5, &reg);
812 rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0, 13);
813 rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0_VALID, 1);
814 rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1, 12);
815 rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1_VALID, 1);
816 rt2500usb_register_write(rt2x00dev, TXRX_CSR5, reg);
817
818 rt2500usb_register_read(rt2x00dev, TXRX_CSR6, &reg);
819 rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0, 10);
820 rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0_VALID, 1);
821 rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1, 11);
822 rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1_VALID, 1);
823 rt2500usb_register_write(rt2x00dev, TXRX_CSR6, reg);
824
825 rt2500usb_register_read(rt2x00dev, TXRX_CSR7, &reg);
826 rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0, 7);
827 rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0_VALID, 1);
828 rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1, 6);
829 rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1_VALID, 1);
830 rt2500usb_register_write(rt2x00dev, TXRX_CSR7, reg);
831
832 rt2500usb_register_read(rt2x00dev, TXRX_CSR8, &reg);
833 rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0, 5);
834 rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0_VALID, 1);
835 rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1, 0);
836 rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1_VALID, 0);
837 rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg);
838
839 rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f);
840 rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d);
841
842 if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
843 return -EBUSY;
844
845 rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
846 rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
847 rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
848 rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 1);
849 rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
850
851 if (rt2x00_get_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) {
852 rt2500usb_register_read(rt2x00dev, PHY_CSR2, &reg);
853 reg &= ~0x0002;
854 } else {
855 reg = 0x3002;
856 }
857 rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg);
858
859 rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0002);
860 rt2500usb_register_write(rt2x00dev, MAC_CSR22, 0x0053);
861 rt2500usb_register_write(rt2x00dev, MAC_CSR15, 0x01ee);
862 rt2500usb_register_write(rt2x00dev, MAC_CSR16, 0x0000);
863
864 rt2500usb_register_read(rt2x00dev, MAC_CSR8, &reg);
865 rt2x00_set_field16(&reg, MAC_CSR8_MAX_FRAME_UNIT,
866 rt2x00dev->rx->data_size);
867 rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg);
868
869 rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
870 rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
871 rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0xff);
872 rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
873
874 rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
875 rt2x00_set_field16(&reg, MAC_CSR18_DELAY_AFTER_BEACON, 90);
876 rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
877
878 rt2500usb_register_read(rt2x00dev, PHY_CSR4, &reg);
879 rt2x00_set_field16(&reg, PHY_CSR4_LOW_RF_LE, 1);
880 rt2500usb_register_write(rt2x00dev, PHY_CSR4, reg);
881
882 rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
883 rt2x00_set_field16(&reg, TXRX_CSR1_AUTO_SEQUENCE, 1);
884 rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
885
886 return 0;
887}
888
889static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev)
890{
891 unsigned int i;
892 u16 eeprom;
893 u8 value;
894 u8 reg_id;
895
896 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
897 rt2500usb_bbp_read(rt2x00dev, 0, &value);
898 if ((value != 0xff) && (value != 0x00))
899 goto continue_csr_init;
900 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
901 udelay(REGISTER_BUSY_DELAY);
902 }
903
904 ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
905 return -EACCES;
906
907continue_csr_init:
908 rt2500usb_bbp_write(rt2x00dev, 3, 0x02);
909 rt2500usb_bbp_write(rt2x00dev, 4, 0x19);
910 rt2500usb_bbp_write(rt2x00dev, 14, 0x1c);
911 rt2500usb_bbp_write(rt2x00dev, 15, 0x30);
912 rt2500usb_bbp_write(rt2x00dev, 16, 0xac);
913 rt2500usb_bbp_write(rt2x00dev, 18, 0x18);
914 rt2500usb_bbp_write(rt2x00dev, 19, 0xff);
915 rt2500usb_bbp_write(rt2x00dev, 20, 0x1e);
916 rt2500usb_bbp_write(rt2x00dev, 21, 0x08);
917 rt2500usb_bbp_write(rt2x00dev, 22, 0x08);
918 rt2500usb_bbp_write(rt2x00dev, 23, 0x08);
919 rt2500usb_bbp_write(rt2x00dev, 24, 0x80);
920 rt2500usb_bbp_write(rt2x00dev, 25, 0x50);
921 rt2500usb_bbp_write(rt2x00dev, 26, 0x08);
922 rt2500usb_bbp_write(rt2x00dev, 27, 0x23);
923 rt2500usb_bbp_write(rt2x00dev, 30, 0x10);
924 rt2500usb_bbp_write(rt2x00dev, 31, 0x2b);
925 rt2500usb_bbp_write(rt2x00dev, 32, 0xb9);
926 rt2500usb_bbp_write(rt2x00dev, 34, 0x12);
927 rt2500usb_bbp_write(rt2x00dev, 35, 0x50);
928 rt2500usb_bbp_write(rt2x00dev, 39, 0xc4);
929 rt2500usb_bbp_write(rt2x00dev, 40, 0x02);
930 rt2500usb_bbp_write(rt2x00dev, 41, 0x60);
931 rt2500usb_bbp_write(rt2x00dev, 53, 0x10);
932 rt2500usb_bbp_write(rt2x00dev, 54, 0x18);
933 rt2500usb_bbp_write(rt2x00dev, 56, 0x08);
934 rt2500usb_bbp_write(rt2x00dev, 57, 0x10);
935 rt2500usb_bbp_write(rt2x00dev, 58, 0x08);
936 rt2500usb_bbp_write(rt2x00dev, 61, 0x60);
937 rt2500usb_bbp_write(rt2x00dev, 62, 0x10);
938 rt2500usb_bbp_write(rt2x00dev, 75, 0xff);
939
940 DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
941 for (i = 0; i < EEPROM_BBP_SIZE; i++) {
942 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
943
944 if (eeprom != 0xffff && eeprom != 0x0000) {
945 reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
946 value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
947 DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
948 reg_id, value);
949 rt2500usb_bbp_write(rt2x00dev, reg_id, value);
950 }
951 }
952 DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
953
954 return 0;
955}
956
957/*
958 * Device state switch handlers.
959 */
960static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
961 enum dev_state state)
962{
963 u16 reg;
964
965 rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
966 rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX,
967 state == STATE_RADIO_RX_OFF);
968 rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
969}
970
971static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev)
972{
973 /*
974 * Initialize all registers.
975 */
976 if (rt2500usb_init_registers(rt2x00dev) ||
977 rt2500usb_init_bbp(rt2x00dev)) {
978 ERROR(rt2x00dev, "Register initialization failed.\n");
979 return -EIO;
980 }
981
982 rt2x00usb_enable_radio(rt2x00dev);
983
984 /*
985 * Enable LED
986 */
987 rt2500usb_enable_led(rt2x00dev);
988
989 return 0;
990}
991
992static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev)
993{
994 /*
995 * Disable LED
996 */
997 rt2500usb_disable_led(rt2x00dev);
998
999 rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121);
1000 rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121);
1001
1002 /*
1003 * Disable synchronisation.
1004 */
1005 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1006
1007 rt2x00usb_disable_radio(rt2x00dev);
1008}
1009
1010static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev,
1011 enum dev_state state)
1012{
1013 u16 reg;
1014 u16 reg2;
1015 unsigned int i;
1016 char put_to_sleep;
1017 char bbp_state;
1018 char rf_state;
1019
1020 put_to_sleep = (state != STATE_AWAKE);
1021
1022 reg = 0;
1023 rt2x00_set_field16(&reg, MAC_CSR17_BBP_DESIRE_STATE, state);
1024 rt2x00_set_field16(&reg, MAC_CSR17_RF_DESIRE_STATE, state);
1025 rt2x00_set_field16(&reg, MAC_CSR17_PUT_TO_SLEEP, put_to_sleep);
1026 rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
1027 rt2x00_set_field16(&reg, MAC_CSR17_SET_STATE, 1);
1028 rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
1029
1030 /*
1031 * Device is not guaranteed to be in the requested state yet.
1032 * We must wait until the register indicates that the
1033 * device has entered the correct state.
1034 */
1035 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1036 rt2500usb_register_read(rt2x00dev, MAC_CSR17, &reg2);
1037 bbp_state = rt2x00_get_field16(reg2, MAC_CSR17_BBP_CURR_STATE);
1038 rf_state = rt2x00_get_field16(reg2, MAC_CSR17_RF_CURR_STATE);
1039 if (bbp_state == state && rf_state == state)
1040 return 0;
1041 rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
1042 msleep(30);
1043 }
1044
1045 NOTICE(rt2x00dev, "Device failed to enter state %d, "
1046 "current device state: bbp %d and rf %d.\n",
1047 state, bbp_state, rf_state);
1048
1049 return -EBUSY;
1050}
1051
1052static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
1053 enum dev_state state)
1054{
1055 int retval = 0;
1056
1057 switch (state) {
1058 case STATE_RADIO_ON:
1059 retval = rt2500usb_enable_radio(rt2x00dev);
1060 break;
1061 case STATE_RADIO_OFF:
1062 rt2500usb_disable_radio(rt2x00dev);
1063 break;
1064 case STATE_RADIO_RX_ON:
1065 case STATE_RADIO_RX_OFF:
1066 rt2500usb_toggle_rx(rt2x00dev, state);
1067 break;
1068 case STATE_DEEP_SLEEP:
1069 case STATE_SLEEP:
1070 case STATE_STANDBY:
1071 case STATE_AWAKE:
1072 retval = rt2500usb_set_state(rt2x00dev, state);
1073 break;
1074 default:
1075 retval = -ENOTSUPP;
1076 break;
1077 }
1078
1079 return retval;
1080}
1081
1082/*
1083 * TX descriptor initialization
1084 */
1085static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1086 struct data_desc *txd,
1087 struct data_entry_desc *desc,
1088 struct ieee80211_hdr *ieee80211hdr,
1089 unsigned int length,
1090 struct ieee80211_tx_control *control)
1091{
1092 u32 word;
1093
1094 /*
1095 * Start writing the descriptor words.
1096 */
1097 rt2x00_desc_read(txd, 1, &word);
1098 rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
1099 rt2x00_set_field32(&word, TXD_W1_AIFS, desc->aifs);
1100 rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min);
1101 rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max);
1102 rt2x00_desc_write(txd, 1, word);
1103
1104 rt2x00_desc_read(txd, 2, &word);
1105 rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal);
1106 rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service);
1107 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low);
1108 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high);
1109 rt2x00_desc_write(txd, 2, word);
1110
1111 rt2x00_desc_read(txd, 0, &word);
1112 rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, control->retry_limit);
1113 rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1114 test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
1115 rt2x00_set_field32(&word, TXD_W0_ACK,
1116 !(control->flags & IEEE80211_TXCTL_NO_ACK));
1117 rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1118 test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
1119 rt2x00_set_field32(&word, TXD_W0_OFDM,
1120 test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags));
1121 rt2x00_set_field32(&word, TXD_W0_NEW_SEQ,
1122 !!(control->flags & IEEE80211_TXCTL_FIRST_FRAGMENT));
1123 rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
1124 rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length);
1125 rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE);
1126 rt2x00_desc_write(txd, 0, word);
1127}
1128
1129/*
1130 * TX data initialization
1131 */
1132static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1133 unsigned int queue)
1134{
1135 u16 reg;
1136
1137 if (queue != IEEE80211_TX_QUEUE_BEACON)
1138 return;
1139
1140 rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
1141 if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) {
1142 rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 1);
1143 /*
1144 * Beacon generation will fail initially.
1145 * To prevent this we need to register the TXRX_CSR19
1146 * register several times.
1147 */
1148 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1149 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1150 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1151 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
1152 rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
1153 }
1154}
1155
1156/*
1157 * RX control handlers
1158 */
1159static int rt2500usb_fill_rxdone(struct data_entry *entry,
1160 int *signal, int *rssi, int *ofdm, int *size)
1161{
1162 struct urb *urb = entry->priv;
1163 struct data_desc *rxd = (struct data_desc *)(entry->skb->data +
1164 (urb->actual_length -
1165 entry->ring->desc_size));
1166 u32 word0;
1167 u32 word1;
1168
1169 rt2x00_desc_read(rxd, 0, &word0);
1170 rt2x00_desc_read(rxd, 1, &word1);
1171
1172 if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
1173 rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR) ||
1174 rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
1175 return -EINVAL;
1176
1177 /*
1178 * Obtain the status about this packet.
1179 */
1180 *signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1181 *rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) -
1182 entry->ring->rt2x00dev->rssi_offset;
1183 *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
1184 *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1185
1186 return 0;
1187}
1188
1189/*
1190 * Interrupt functions.
1191 */
1192static void rt2500usb_beacondone(struct urb *urb)
1193{
1194 struct data_entry *entry = (struct data_entry *)urb->context;
1195 struct data_ring *ring = entry->ring;
1196
1197 if (!test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags))
1198 return;
1199
1200 /*
1201 * Check if this was the guardian beacon,
1202 * if that was the case we need to send the real beacon now.
1203 * Otherwise we should free the sk_buffer, the device
1204 * should be doing the rest of the work now.
1205 */
1206 if (ring->index == 1) {
1207 rt2x00_ring_index_done_inc(ring);
1208 entry = rt2x00_get_data_entry(ring);
1209 usb_submit_urb(entry->priv, GFP_ATOMIC);
1210 rt2x00_ring_index_inc(ring);
1211 } else if (ring->index_done == 1) {
1212 entry = rt2x00_get_data_entry_done(ring);
1213 if (entry->skb) {
1214 dev_kfree_skb(entry->skb);
1215 entry->skb = NULL;
1216 }
1217 rt2x00_ring_index_done_inc(ring);
1218 }
1219}
1220
1221/*
1222 * Device probe functions.
1223 */
1224static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1225{
1226 u16 word;
1227 u8 *mac;
1228
1229 rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1230
1231 /*
1232 * Start validation of the data that has been read.
1233 */
1234 mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1235 if (!is_valid_ether_addr(mac)) {
1236 random_ether_addr(mac);
1237 EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac));
1238 }
1239
1240 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1241 if (word == 0xffff) {
1242 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1243 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 0);
1244 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 0);
1245 rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, 0);
1246 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1247 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1248 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
1249 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1250 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1251 }
1252
1253 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1254 if (word == 0xffff) {
1255 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1256 rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
1257 rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
1258 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1259 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1260 }
1261
1262 rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
1263 if (word == 0xffff) {
1264 rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
1265 DEFAULT_RSSI_OFFSET);
1266 rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
1267 EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
1268 }
1269
1270 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &word);
1271 if (word == 0xffff) {
1272 rt2x00_set_field16(&word, EEPROM_BBPTUNE_THRESHOLD, 45);
1273 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE, word);
1274 EEPROM(rt2x00dev, "BBPtune: 0x%04x\n", word);
1275 }
1276
1277 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word);
1278 if (word == 0xffff) {
1279 rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40);
1280 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
1281 EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word);
1282 }
1283
1284 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word);
1285 if (word == 0xffff) {
1286 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_LOW, 0x48);
1287 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41);
1288 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word);
1289 EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word);
1290 }
1291
1292 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word);
1293 if (word == 0xffff) {
1294 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_LOW, 0x40);
1295 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_HIGH, 0x80);
1296 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R24, word);
1297 EEPROM(rt2x00dev, "BBPtune r24: 0x%04x\n", word);
1298 }
1299
1300 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &word);
1301 if (word == 0xffff) {
1302 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_LOW, 0x40);
1303 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_HIGH, 0x50);
1304 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R25, word);
1305 EEPROM(rt2x00dev, "BBPtune r25: 0x%04x\n", word);
1306 }
1307
1308 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &word);
1309 if (word == 0xffff) {
1310 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_LOW, 0x60);
1311 rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_HIGH, 0x6d);
1312 rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R61, word);
1313 EEPROM(rt2x00dev, "BBPtune r61: 0x%04x\n", word);
1314 }
1315
1316 return 0;
1317}
1318
1319static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1320{
1321 u16 reg;
1322 u16 value;
1323 u16 eeprom;
1324
1325 /*
1326 * Read EEPROM word for configuration.
1327 */
1328 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1329
1330 /*
1331 * Identify RF chipset.
1332 */
1333 value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1334 rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
1335 rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
1336
1337 if (rt2x00_rev(&rt2x00dev->chip, 0xffff0)) {
1338 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1339 return -ENODEV;
1340 }
1341
1342 if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
1343 !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
1344 !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
1345 !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
1346 !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
1347 !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1348 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1349 return -ENODEV;
1350 }
1351
1352 /*
1353 * Identify default antenna configuration.
1354 */
1355 rt2x00dev->hw->conf.antenna_sel_tx =
1356 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1357 rt2x00dev->hw->conf.antenna_sel_rx =
1358 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1359
1360 /*
1361 * Store led mode, for correct led behaviour.
1362 */
1363 rt2x00dev->led_mode =
1364 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1365
1366 /*
1367 * Check if the BBP tuning should be disabled.
1368 */
1369 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1370 if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
1371 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1372
1373 /*
1374 * Read the RSSI <-> dBm offset information.
1375 */
1376 rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
1377 rt2x00dev->rssi_offset =
1378 rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
1379
1380 return 0;
1381}
1382
1383/*
1384 * RF value list for RF2522
1385 * Supports: 2.4 GHz
1386 */
1387static const struct rf_channel rf_vals_bg_2522[] = {
1388 { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 },
1389 { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 },
1390 { 3, 0x00002050, 0x000c2002, 0x00000101, 0 },
1391 { 4, 0x00002050, 0x000c2016, 0x00000101, 0 },
1392 { 5, 0x00002050, 0x000c202a, 0x00000101, 0 },
1393 { 6, 0x00002050, 0x000c203e, 0x00000101, 0 },
1394 { 7, 0x00002050, 0x000c2052, 0x00000101, 0 },
1395 { 8, 0x00002050, 0x000c2066, 0x00000101, 0 },
1396 { 9, 0x00002050, 0x000c207a, 0x00000101, 0 },
1397 { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
1398 { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
1399 { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
1400 { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
1401 { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
1402};
1403
1404/*
1405 * RF value list for RF2523
1406 * Supports: 2.4 GHz
1407 */
1408static const struct rf_channel rf_vals_bg_2523[] = {
1409 { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
1410 { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
1411 { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
1412 { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
1413 { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
1414 { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
1415 { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
1416 { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
1417 { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
1418 { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
1419 { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
1420 { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
1421 { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
1422 { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
1423};
1424
1425/*
1426 * RF value list for RF2524
1427 * Supports: 2.4 GHz
1428 */
1429static const struct rf_channel rf_vals_bg_2524[] = {
1430 { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
1431 { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
1432 { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
1433 { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
1434 { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
1435 { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
1436 { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
1437 { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
1438 { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
1439 { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
1440 { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
1441 { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
1442 { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
1443 { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
1444};
1445
1446/*
1447 * RF value list for RF2525
1448 * Supports: 2.4 GHz
1449 */
1450static const struct rf_channel rf_vals_bg_2525[] = {
1451 { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
1452 { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
1453 { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
1454 { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
1455 { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
1456 { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
1457 { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
1458 { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
1459 { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
1460 { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
1461 { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
1462 { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
1463 { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
1464 { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
1465};
1466
1467/*
1468 * RF value list for RF2525e
1469 * Supports: 2.4 GHz
1470 */
1471static const struct rf_channel rf_vals_bg_2525e[] = {
1472 { 1, 0x00022010, 0x0000089a, 0x00060111, 0x00000e1b },
1473 { 2, 0x00022010, 0x0000089e, 0x00060111, 0x00000e07 },
1474 { 3, 0x00022010, 0x0000089e, 0x00060111, 0x00000e1b },
1475 { 4, 0x00022010, 0x000008a2, 0x00060111, 0x00000e07 },
1476 { 5, 0x00022010, 0x000008a2, 0x00060111, 0x00000e1b },
1477 { 6, 0x00022010, 0x000008a6, 0x00060111, 0x00000e07 },
1478 { 7, 0x00022010, 0x000008a6, 0x00060111, 0x00000e1b },
1479 { 8, 0x00022010, 0x000008aa, 0x00060111, 0x00000e07 },
1480 { 9, 0x00022010, 0x000008aa, 0x00060111, 0x00000e1b },
1481 { 10, 0x00022010, 0x000008ae, 0x00060111, 0x00000e07 },
1482 { 11, 0x00022010, 0x000008ae, 0x00060111, 0x00000e1b },
1483 { 12, 0x00022010, 0x000008b2, 0x00060111, 0x00000e07 },
1484 { 13, 0x00022010, 0x000008b2, 0x00060111, 0x00000e1b },
1485 { 14, 0x00022010, 0x000008b6, 0x00060111, 0x00000e23 },
1486};
1487
1488/*
1489 * RF value list for RF5222
1490 * Supports: 2.4 GHz & 5.2 GHz
1491 */
1492static const struct rf_channel rf_vals_5222[] = {
1493 { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
1494 { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
1495 { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
1496 { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
1497 { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
1498 { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
1499 { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
1500 { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
1501 { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
1502 { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
1503 { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
1504 { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
1505 { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
1506 { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
1507
1508 /* 802.11 UNI / HyperLan 2 */
1509 { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
1510 { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
1511 { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
1512 { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
1513 { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
1514 { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
1515 { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
1516 { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
1517
1518 /* 802.11 HyperLan 2 */
1519 { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
1520 { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
1521 { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
1522 { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
1523 { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
1524 { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
1525 { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
1526 { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
1527 { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
1528 { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
1529
1530 /* 802.11 UNII */
1531 { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
1532 { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
1533 { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
1534 { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
1535 { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
1536};
1537
1538static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1539{
1540 struct hw_mode_spec *spec = &rt2x00dev->spec;
1541 u8 *txpower;
1542 unsigned int i;
1543
1544 /*
1545 * Initialize all hw fields.
1546 */
1547 rt2x00dev->hw->flags =
1548 IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
1549 IEEE80211_HW_RX_INCLUDES_FCS |
1550 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1551 IEEE80211_HW_MONITOR_DURING_OPER |
1552 IEEE80211_HW_NO_PROBE_FILTERING;
1553 rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
1554 rt2x00dev->hw->max_signal = MAX_SIGNAL;
1555 rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1556 rt2x00dev->hw->queues = 2;
1557
1558 SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
1559 SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1560 rt2x00_eeprom_addr(rt2x00dev,
1561 EEPROM_MAC_ADDR_0));
1562
1563 /*
1564 * Convert tx_power array in eeprom.
1565 */
1566 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1567 for (i = 0; i < 14; i++)
1568 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1569
1570 /*
1571 * Initialize hw_mode information.
1572 */
1573 spec->num_modes = 2;
1574 spec->num_rates = 12;
1575 spec->tx_power_a = NULL;
1576 spec->tx_power_bg = txpower;
1577 spec->tx_power_default = DEFAULT_TXPOWER;
1578
1579 if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
1580 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
1581 spec->channels = rf_vals_bg_2522;
1582 } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
1583 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
1584 spec->channels = rf_vals_bg_2523;
1585 } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
1586 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
1587 spec->channels = rf_vals_bg_2524;
1588 } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
1589 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
1590 spec->channels = rf_vals_bg_2525;
1591 } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
1592 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
1593 spec->channels = rf_vals_bg_2525e;
1594 } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1595 spec->num_channels = ARRAY_SIZE(rf_vals_5222);
1596 spec->channels = rf_vals_5222;
1597 spec->num_modes = 3;
1598 }
1599}
1600
1601static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
1602{
1603 int retval;
1604
1605 /*
1606 * Allocate eeprom data.
1607 */
1608 retval = rt2500usb_validate_eeprom(rt2x00dev);
1609 if (retval)
1610 return retval;
1611
1612 retval = rt2500usb_init_eeprom(rt2x00dev);
1613 if (retval)
1614 return retval;
1615
1616 /*
1617 * Initialize hw specifications.
1618 */
1619 rt2500usb_probe_hw_mode(rt2x00dev);
1620
1621 /*
1622 * USB devices require scheduled packet filter toggling
1623 *This device requires the beacon ring
1624 */
1625 __set_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags);
1626 __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
1627
1628 /*
1629 * Set the rssi offset.
1630 */
1631 rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1632
1633 return 0;
1634}
1635
1636/*
1637 * IEEE80211 stack callback functions.
1638 */
1639static int rt2500usb_beacon_update(struct ieee80211_hw *hw,
1640 struct sk_buff *skb,
1641 struct ieee80211_tx_control *control)
1642{
1643 struct rt2x00_dev *rt2x00dev = hw->priv;
1644 struct usb_device *usb_dev =
1645 interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
1646 struct data_ring *ring =
1647 rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
1648 struct data_entry *beacon;
1649 struct data_entry *guardian;
1650 int length;
1651
1652 /*
1653 * Just in case the ieee80211 doesn't set this,
1654 * but we need this queue set for the descriptor
1655 * initialization.
1656 */
1657 control->queue = IEEE80211_TX_QUEUE_BEACON;
1658
1659 /*
1660 * Obtain 2 entries, one for the guardian byte,
1661 * the second for the actual beacon.
1662 */
1663 guardian = rt2x00_get_data_entry(ring);
1664 rt2x00_ring_index_inc(ring);
1665 beacon = rt2x00_get_data_entry(ring);
1666
1667 /*
1668 * First we create the beacon.
1669 */
1670 skb_push(skb, ring->desc_size);
1671 rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data,
1672 (struct ieee80211_hdr *)(skb->data +
1673 ring->desc_size),
1674 skb->len - ring->desc_size, control);
1675
1676 /*
1677 * Length passed to usb_fill_urb cannot be an odd number,
1678 * so add 1 byte to make it even.
1679 */
1680 length = skb->len;
1681 if (length % 2)
1682 length++;
1683
1684 usb_fill_bulk_urb(beacon->priv, usb_dev,
1685 usb_sndbulkpipe(usb_dev, 1),
1686 skb->data, length, rt2500usb_beacondone, beacon);
1687
1688 beacon->skb = skb;
1689
1690 /*
1691 * Second we need to create the guardian byte.
1692 * We only need a single byte, so lets recycle
1693 * the 'flags' field we are not using for beacons.
1694 */
1695 guardian->flags = 0;
1696 usb_fill_bulk_urb(guardian->priv, usb_dev,
1697 usb_sndbulkpipe(usb_dev, 1),
1698 &guardian->flags, 1, rt2500usb_beacondone, guardian);
1699
1700 /*
1701 * Send out the guardian byte.
1702 */
1703 usb_submit_urb(guardian->priv, GFP_ATOMIC);
1704
1705 /*
1706 * Enable beacon generation.
1707 */
1708 rt2500usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
1709
1710 return 0;
1711}
1712
1713static const struct ieee80211_ops rt2500usb_mac80211_ops = {
1714 .tx = rt2x00mac_tx,
1715 .add_interface = rt2x00mac_add_interface,
1716 .remove_interface = rt2x00mac_remove_interface,
1717 .config = rt2x00mac_config,
1718 .config_interface = rt2x00mac_config_interface,
1719 .set_multicast_list = rt2x00mac_set_multicast_list,
1720 .get_stats = rt2x00mac_get_stats,
1721 .conf_tx = rt2x00mac_conf_tx,
1722 .get_tx_stats = rt2x00mac_get_tx_stats,
1723 .beacon_update = rt2500usb_beacon_update,
1724};
1725
1726static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
1727 .probe_hw = rt2500usb_probe_hw,
1728 .initialize = rt2x00usb_initialize,
1729 .uninitialize = rt2x00usb_uninitialize,
1730 .set_device_state = rt2500usb_set_device_state,
1731 .link_stats = rt2500usb_link_stats,
1732 .reset_tuner = rt2500usb_reset_tuner,
1733 .link_tuner = rt2500usb_link_tuner,
1734 .write_tx_desc = rt2500usb_write_tx_desc,
1735 .write_tx_data = rt2x00usb_write_tx_data,
1736 .kick_tx_queue = rt2500usb_kick_tx_queue,
1737 .fill_rxdone = rt2500usb_fill_rxdone,
1738 .config_mac_addr = rt2500usb_config_mac_addr,
1739 .config_bssid = rt2500usb_config_bssid,
1740 .config_packet_filter = rt2500usb_config_packet_filter,
1741 .config_type = rt2500usb_config_type,
1742 .config = rt2500usb_config,
1743};
1744
1745static const struct rt2x00_ops rt2500usb_ops = {
1746 .name = DRV_NAME,
1747 .rxd_size = RXD_DESC_SIZE,
1748 .txd_size = TXD_DESC_SIZE,
1749 .eeprom_size = EEPROM_SIZE,
1750 .rf_size = RF_SIZE,
1751 .lib = &rt2500usb_rt2x00_ops,
1752 .hw = &rt2500usb_mac80211_ops,
1753#ifdef CONFIG_RT2X00_LIB_DEBUGFS
1754 .debugfs = &rt2500usb_rt2x00debug,
1755#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1756};
1757
1758/*
1759 * rt2500usb module information.
1760 */
1761static struct usb_device_id rt2500usb_device_table[] = {
1762 /* ASUS */
1763 { USB_DEVICE(0x0b05, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1764 { USB_DEVICE(0x0b05, 0x1707), USB_DEVICE_DATA(&rt2500usb_ops) },
1765 /* Belkin */
1766 { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) },
1767 { USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) },
1768 { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) },
1769 /* Cisco Systems */
1770 { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
1771 { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
1772 { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
1773 /* Conceptronic */
1774 { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
1775 /* D-LINK */
1776 { USB_DEVICE(0x2001, 0x3c00), USB_DEVICE_DATA(&rt2500usb_ops) },
1777 /* Gigabyte */
1778 { USB_DEVICE(0x1044, 0x8001), USB_DEVICE_DATA(&rt2500usb_ops) },
1779 { USB_DEVICE(0x1044, 0x8007), USB_DEVICE_DATA(&rt2500usb_ops) },
1780 /* Hercules */
1781 { USB_DEVICE(0x06f8, 0xe000), USB_DEVICE_DATA(&rt2500usb_ops) },
1782 /* Melco */
1783 { USB_DEVICE(0x0411, 0x0066), USB_DEVICE_DATA(&rt2500usb_ops) },
1784 { USB_DEVICE(0x0411, 0x0067), USB_DEVICE_DATA(&rt2500usb_ops) },
1785 { USB_DEVICE(0x0411, 0x008b), USB_DEVICE_DATA(&rt2500usb_ops) },
1786 { USB_DEVICE(0x0411, 0x0097), USB_DEVICE_DATA(&rt2500usb_ops) },
1787
1788 /* MSI */
1789 { USB_DEVICE(0x0db0, 0x6861), USB_DEVICE_DATA(&rt2500usb_ops) },
1790 { USB_DEVICE(0x0db0, 0x6865), USB_DEVICE_DATA(&rt2500usb_ops) },
1791 { USB_DEVICE(0x0db0, 0x6869), USB_DEVICE_DATA(&rt2500usb_ops) },
1792 /* Ralink */
1793 { USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
1794 { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
1795 { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
1796 { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1797 /* Siemens */
1798 { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
1799 /* SMC */
1800 { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
1801 /* Spairon */
1802 { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
1803 /* Trust */
1804 { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
1805 /* Zinwell */
1806 { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
1807 { 0, }
1808};
1809
1810MODULE_AUTHOR(DRV_PROJECT);
1811MODULE_VERSION(DRV_VERSION);
1812MODULE_DESCRIPTION("Ralink RT2500 USB Wireless LAN driver.");
1813MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards");
1814MODULE_DEVICE_TABLE(usb, rt2500usb_device_table);
1815MODULE_LICENSE("GPL");
1816
1817static struct usb_driver rt2500usb_driver = {
1818 .name = DRV_NAME,
1819 .id_table = rt2500usb_device_table,
1820 .probe = rt2x00usb_probe,
1821 .disconnect = rt2x00usb_disconnect,
1822 .suspend = rt2x00usb_suspend,
1823 .resume = rt2x00usb_resume,
1824};
1825
1826static int __init rt2500usb_init(void)
1827{
1828 return usb_register(&rt2500usb_driver);
1829}
1830
1831static void __exit rt2500usb_exit(void)
1832{
1833 usb_deregister(&rt2500usb_driver);
1834}
1835
1836module_init(rt2500usb_init);
1837module_exit(rt2500usb_exit);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
new file mode 100644
index 000000000000..b18d56e73cf1
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -0,0 +1,798 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2500usb
23 Abstract: Data structures and registers for the rt2500usb module.
24 Supported chipsets: RT2570.
25 */
26
27#ifndef RT2500USB_H
28#define RT2500USB_H
29
30/*
31 * RF chip defines.
32 */
33#define RF2522 0x0000
34#define RF2523 0x0001
35#define RF2524 0x0002
36#define RF2525 0x0003
37#define RF2525E 0x0005
38#define RF5222 0x0010
39
40/*
41 * RT2570 version
42 */
43#define RT2570_VERSION_B 2
44#define RT2570_VERSION_C 3
45#define RT2570_VERSION_D 4
46
47/*
48 * Signal information.
49 * Defaul offset is required for RSSI <-> dBm conversion.
50 */
51#define MAX_SIGNAL 100
52#define MAX_RX_SSI -1
53#define DEFAULT_RSSI_OFFSET 120
54
55/*
56 * Register layout information.
57 */
58#define CSR_REG_BASE 0x0400
59#define CSR_REG_SIZE 0x0100
60#define EEPROM_BASE 0x0000
61#define EEPROM_SIZE 0x006a
62#define BBP_SIZE 0x0060
63#define RF_SIZE 0x0014
64
65/*
66 * Control/Status Registers(CSR).
67 * Some values are set in TU, whereas 1 TU == 1024 us.
68 */
69
70/*
71 * MAC_CSR0: ASIC revision number.
72 */
73#define MAC_CSR0 0x0400
74
75/*
76 * MAC_CSR1: System control.
77 * SOFT_RESET: Software reset, 1: reset, 0: normal.
78 * BBP_RESET: Hardware reset, 1: reset, 0, release.
79 * HOST_READY: Host ready after initialization.
80 */
81#define MAC_CSR1 0x0402
82#define MAC_CSR1_SOFT_RESET FIELD16(0x00000001)
83#define MAC_CSR1_BBP_RESET FIELD16(0x00000002)
84#define MAC_CSR1_HOST_READY FIELD16(0x00000004)
85
86/*
87 * MAC_CSR2: STA MAC register 0.
88 */
89#define MAC_CSR2 0x0404
90#define MAC_CSR2_BYTE0 FIELD16(0x00ff)
91#define MAC_CSR2_BYTE1 FIELD16(0xff00)
92
93/*
94 * MAC_CSR3: STA MAC register 1.
95 */
96#define MAC_CSR3 0x0406
97#define MAC_CSR3_BYTE2 FIELD16(0x00ff)
98#define MAC_CSR3_BYTE3 FIELD16(0xff00)
99
100/*
101 * MAC_CSR4: STA MAC register 2.
102 */
103#define MAC_CSR4 0X0408
104#define MAC_CSR4_BYTE4 FIELD16(0x00ff)
105#define MAC_CSR4_BYTE5 FIELD16(0xff00)
106
107/*
108 * MAC_CSR5: BSSID register 0.
109 */
110#define MAC_CSR5 0x040a
111#define MAC_CSR5_BYTE0 FIELD16(0x00ff)
112#define MAC_CSR5_BYTE1 FIELD16(0xff00)
113
114/*
115 * MAC_CSR6: BSSID register 1.
116 */
117#define MAC_CSR6 0x040c
118#define MAC_CSR6_BYTE2 FIELD16(0x00ff)
119#define MAC_CSR6_BYTE3 FIELD16(0xff00)
120
121/*
122 * MAC_CSR7: BSSID register 2.
123 */
124#define MAC_CSR7 0x040e
125#define MAC_CSR7_BYTE4 FIELD16(0x00ff)
126#define MAC_CSR7_BYTE5 FIELD16(0xff00)
127
128/*
129 * MAC_CSR8: Max frame length.
130 */
131#define MAC_CSR8 0x0410
132#define MAC_CSR8_MAX_FRAME_UNIT FIELD16(0x0fff)
133
134/*
135 * Misc MAC_CSR registers.
136 * MAC_CSR9: Timer control.
137 * MAC_CSR10: Slot time.
138 * MAC_CSR11: IFS.
139 * MAC_CSR12: EIFS.
140 * MAC_CSR13: Power mode0.
141 * MAC_CSR14: Power mode1.
142 * MAC_CSR15: Power saving transition0
143 * MAC_CSR16: Power saving transition1
144 */
145#define MAC_CSR9 0x0412
146#define MAC_CSR10 0x0414
147#define MAC_CSR11 0x0416
148#define MAC_CSR12 0x0418
149#define MAC_CSR13 0x041a
150#define MAC_CSR14 0x041c
151#define MAC_CSR15 0x041e
152#define MAC_CSR16 0x0420
153
154/*
155 * MAC_CSR17: Manual power control / status register.
156 * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake.
157 * SET_STATE: Set state. Write 1 to trigger, self cleared.
158 * BBP_DESIRE_STATE: BBP desired state.
159 * RF_DESIRE_STATE: RF desired state.
160 * BBP_CURRENT_STATE: BBP current state.
161 * RF_CURRENT_STATE: RF current state.
162 * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared.
163 */
164#define MAC_CSR17 0x0422
165#define MAC_CSR17_SET_STATE FIELD16(0x0001)
166#define MAC_CSR17_BBP_DESIRE_STATE FIELD16(0x0006)
167#define MAC_CSR17_RF_DESIRE_STATE FIELD16(0x0018)
168#define MAC_CSR17_BBP_CURR_STATE FIELD16(0x0060)
169#define MAC_CSR17_RF_CURR_STATE FIELD16(0x0180)
170#define MAC_CSR17_PUT_TO_SLEEP FIELD16(0x0200)
171
172/*
173 * MAC_CSR18: Wakeup timer register.
174 * DELAY_AFTER_BEACON: Delay after Tbcn expired in units of 1/16 TU.
175 * BEACONS_BEFORE_WAKEUP: Number of beacon before wakeup.
176 * AUTO_WAKE: Enable auto wakeup / sleep mechanism.
177 */
178#define MAC_CSR18 0x0424
179#define MAC_CSR18_DELAY_AFTER_BEACON FIELD16(0x00ff)
180#define MAC_CSR18_BEACONS_BEFORE_WAKEUP FIELD16(0x7f00)
181#define MAC_CSR18_AUTO_WAKE FIELD16(0x8000)
182
183/*
184 * MAC_CSR19: GPIO control register.
185 */
186#define MAC_CSR19 0x0426
187
188/*
189 * MAC_CSR20: LED control register.
190 * ACTIVITY: 0: idle, 1: active.
191 * LINK: 0: linkoff, 1: linkup.
192 * ACTIVITY_POLARITY: 0: active low, 1: active high.
193 */
194#define MAC_CSR20 0x0428
195#define MAC_CSR20_ACTIVITY FIELD16(0x0001)
196#define MAC_CSR20_LINK FIELD16(0x0002)
197#define MAC_CSR20_ACTIVITY_POLARITY FIELD16(0x0004)
198
199/*
200 * MAC_CSR21: LED control register.
201 * ON_PERIOD: On period, default 70ms.
202 * OFF_PERIOD: Off period, default 30ms.
203 */
204#define MAC_CSR21 0x042a
205#define MAC_CSR21_ON_PERIOD FIELD16(0x00ff)
206#define MAC_CSR21_OFF_PERIOD FIELD16(0xff00)
207
208/*
209 * Collision window control register.
210 */
211#define MAC_CSR22 0x042c
212
213/*
214 * Transmit related CSRs.
215 * Some values are set in TU, whereas 1 TU == 1024 us.
216 */
217
218/*
219 * TXRX_CSR0: Security control register.
220 */
221#define TXRX_CSR0 0x0440
222#define TXRX_CSR0_ALGORITHM FIELD16(0x0007)
223#define TXRX_CSR0_IV_OFFSET FIELD16(0x01f8)
224#define TXRX_CSR0_KEY_ID FIELD16(0x1e00)
225
226/*
227 * TXRX_CSR1: TX configuration.
228 * ACK_TIMEOUT: ACK Timeout in unit of 1-us.
229 * TSF_OFFSET: TSF offset in MAC header.
230 * AUTO_SEQUENCE: Let ASIC control frame sequence number.
231 */
232#define TXRX_CSR1 0x0442
233#define TXRX_CSR1_ACK_TIMEOUT FIELD16(0x00ff)
234#define TXRX_CSR1_TSF_OFFSET FIELD16(0x7f00)
235#define TXRX_CSR1_AUTO_SEQUENCE FIELD16(0x8000)
236
237/*
238 * TXRX_CSR2: RX control.
239 * DISABLE_RX: Disable rx engine.
240 * DROP_CRC: Drop crc error.
241 * DROP_PHYSICAL: Drop physical error.
242 * DROP_CONTROL: Drop control frame.
243 * DROP_NOT_TO_ME: Drop not to me unicast frame.
244 * DROP_TODS: Drop frame tods bit is true.
245 * DROP_VERSION_ERROR: Drop version error frame.
246 * DROP_MCAST: Drop multicast frames.
247 * DROP_BCAST: Drop broadcast frames.
248 */
249#define TXRX_CSR2 0x0444
250#define TXRX_CSR2_DISABLE_RX FIELD16(0x0001)
251#define TXRX_CSR2_DROP_CRC FIELD16(0x0002)
252#define TXRX_CSR2_DROP_PHYSICAL FIELD16(0x0004)
253#define TXRX_CSR2_DROP_CONTROL FIELD16(0x0008)
254#define TXRX_CSR2_DROP_NOT_TO_ME FIELD16(0x0010)
255#define TXRX_CSR2_DROP_TODS FIELD16(0x0020)
256#define TXRX_CSR2_DROP_VERSION_ERROR FIELD16(0x0040)
257#define TXRX_CSR2_DROP_MULTICAST FIELD16(0x0200)
258#define TXRX_CSR2_DROP_BROADCAST FIELD16(0x0400)
259
260/*
261 * RX BBP ID registers
262 * TXRX_CSR3: CCK RX BBP ID.
263 * TXRX_CSR4: OFDM RX BBP ID.
264 */
265#define TXRX_CSR3 0x0446
266#define TXRX_CSR4 0x0448
267
268/*
269 * TXRX_CSR5: CCK TX BBP ID0.
270 */
271#define TXRX_CSR5 0x044a
272#define TXRX_CSR5_BBP_ID0 FIELD16(0x007f)
273#define TXRX_CSR5_BBP_ID0_VALID FIELD16(0x0080)
274#define TXRX_CSR5_BBP_ID1 FIELD16(0x7f00)
275#define TXRX_CSR5_BBP_ID1_VALID FIELD16(0x8000)
276
277/*
278 * TXRX_CSR6: CCK TX BBP ID1.
279 */
280#define TXRX_CSR6 0x044c
281#define TXRX_CSR6_BBP_ID0 FIELD16(0x007f)
282#define TXRX_CSR6_BBP_ID0_VALID FIELD16(0x0080)
283#define TXRX_CSR6_BBP_ID1 FIELD16(0x7f00)
284#define TXRX_CSR6_BBP_ID1_VALID FIELD16(0x8000)
285
286/*
287 * TXRX_CSR7: OFDM TX BBP ID0.
288 */
289#define TXRX_CSR7 0x044e
290#define TXRX_CSR7_BBP_ID0 FIELD16(0x007f)
291#define TXRX_CSR7_BBP_ID0_VALID FIELD16(0x0080)
292#define TXRX_CSR7_BBP_ID1 FIELD16(0x7f00)
293#define TXRX_CSR7_BBP_ID1_VALID FIELD16(0x8000)
294
295/*
296 * TXRX_CSR5: OFDM TX BBP ID1.
297 */
298#define TXRX_CSR8 0x0450
299#define TXRX_CSR8_BBP_ID0 FIELD16(0x007f)
300#define TXRX_CSR8_BBP_ID0_VALID FIELD16(0x0080)
301#define TXRX_CSR8_BBP_ID1 FIELD16(0x7f00)
302#define TXRX_CSR8_BBP_ID1_VALID FIELD16(0x8000)
303
304/*
305 * TXRX_CSR9: TX ACK time-out.
306 */
307#define TXRX_CSR9 0x0452
308
309/*
310 * TXRX_CSR10: Auto responder control.
311 */
312#define TXRX_CSR10 0x0454
313#define TXRX_CSR10_AUTORESPOND_PREAMBLE FIELD16(0x0004)
314
315/*
316 * TXRX_CSR11: Auto responder basic rate.
317 */
318#define TXRX_CSR11 0x0456
319
320/*
321 * ACK/CTS time registers.
322 */
323#define TXRX_CSR12 0x0458
324#define TXRX_CSR13 0x045a
325#define TXRX_CSR14 0x045c
326#define TXRX_CSR15 0x045e
327#define TXRX_CSR16 0x0460
328#define TXRX_CSR17 0x0462
329
330/*
331 * TXRX_CSR18: Synchronization control register.
332 */
333#define TXRX_CSR18 0x0464
334#define TXRX_CSR18_OFFSET FIELD16(0x000f)
335#define TXRX_CSR18_INTERVAL FIELD16(0xfff0)
336
337/*
338 * TXRX_CSR19: Synchronization control register.
339 * TSF_COUNT: Enable TSF auto counting.
340 * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
341 * TBCN: Enable Tbcn with reload value.
342 * BEACON_GEN: Enable beacon generator.
343 */
344#define TXRX_CSR19 0x0466
345#define TXRX_CSR19_TSF_COUNT FIELD16(0x0001)
346#define TXRX_CSR19_TSF_SYNC FIELD16(0x0006)
347#define TXRX_CSR19_TBCN FIELD16(0x0008)
348#define TXRX_CSR19_BEACON_GEN FIELD16(0x0010)
349
350/*
351 * TXRX_CSR20: Tx BEACON offset time control register.
352 * OFFSET: In units of usec.
353 * BCN_EXPECT_WINDOW: Default: 2^CWmin
354 */
355#define TXRX_CSR20 0x0468
356#define TXRX_CSR20_OFFSET FIELD16(0x1fff)
357#define TXRX_CSR20_BCN_EXPECT_WINDOW FIELD16(0xe000)
358
359/*
360 * TXRX_CSR21
361 */
362#define TXRX_CSR21 0x046a
363
364/*
365 * Encryption related CSRs.
366 *
367 */
368
369/*
370 * SEC_CSR0-SEC_CSR7: Shared key 0, word 0-7
371 */
372#define SEC_CSR0 0x0480
373#define SEC_CSR1 0x0482
374#define SEC_CSR2 0x0484
375#define SEC_CSR3 0x0486
376#define SEC_CSR4 0x0488
377#define SEC_CSR5 0x048a
378#define SEC_CSR6 0x048c
379#define SEC_CSR7 0x048e
380
381/*
382 * SEC_CSR8-SEC_CSR15: Shared key 1, word 0-7
383 */
384#define SEC_CSR8 0x0490
385#define SEC_CSR9 0x0492
386#define SEC_CSR10 0x0494
387#define SEC_CSR11 0x0496
388#define SEC_CSR12 0x0498
389#define SEC_CSR13 0x049a
390#define SEC_CSR14 0x049c
391#define SEC_CSR15 0x049e
392
393/*
394 * SEC_CSR16-SEC_CSR23: Shared key 2, word 0-7
395 */
396#define SEC_CSR16 0x04a0
397#define SEC_CSR17 0x04a2
398#define SEC_CSR18 0X04A4
399#define SEC_CSR19 0x04a6
400#define SEC_CSR20 0x04a8
401#define SEC_CSR21 0x04aa
402#define SEC_CSR22 0x04ac
403#define SEC_CSR23 0x04ae
404
405/*
406 * SEC_CSR24-SEC_CSR31: Shared key 3, word 0-7
407 */
408#define SEC_CSR24 0x04b0
409#define SEC_CSR25 0x04b2
410#define SEC_CSR26 0x04b4
411#define SEC_CSR27 0x04b6
412#define SEC_CSR28 0x04b8
413#define SEC_CSR29 0x04ba
414#define SEC_CSR30 0x04bc
415#define SEC_CSR31 0x04be
416
417/*
418 * PHY control registers.
419 */
420
421/*
422 * PHY_CSR0: RF switching timing control.
423 */
424#define PHY_CSR0 0x04c0
425
426/*
427 * PHY_CSR1: TX PA configuration.
428 */
429#define PHY_CSR1 0x04c2
430
431/*
432 * MAC configuration registers.
433 * PHY_CSR2: TX MAC configuration.
434 * PHY_CSR3: RX MAC configuration.
435 */
436#define PHY_CSR2 0x04c4
437#define PHY_CSR3 0x04c6
438
439/*
440 * PHY_CSR4: Interface configuration.
441 */
442#define PHY_CSR4 0x04c8
443#define PHY_CSR4_LOW_RF_LE FIELD16(0x0001)
444
445/*
446 * BBP pre-TX registers.
447 * PHY_CSR5: BBP pre-TX CCK.
448 */
449#define PHY_CSR5 0x04ca
450#define PHY_CSR5_CCK FIELD16(0x0003)
451#define PHY_CSR5_CCK_FLIP FIELD16(0x0004)
452
453/*
454 * BBP pre-TX registers.
455 * PHY_CSR6: BBP pre-TX OFDM.
456 */
457#define PHY_CSR6 0x04cc
458#define PHY_CSR6_OFDM FIELD16(0x0003)
459#define PHY_CSR6_OFDM_FLIP FIELD16(0x0004)
460
461/*
462 * PHY_CSR7: BBP access register 0.
463 * BBP_DATA: BBP data.
464 * BBP_REG_ID: BBP register ID.
465 * BBP_READ_CONTROL: 0: write, 1: read.
466 */
467#define PHY_CSR7 0x04ce
468#define PHY_CSR7_DATA FIELD16(0x00ff)
469#define PHY_CSR7_REG_ID FIELD16(0x7f00)
470#define PHY_CSR7_READ_CONTROL FIELD16(0x8000)
471
472/*
473 * PHY_CSR8: BBP access register 1.
474 * BBP_BUSY: ASIC is busy execute BBP programming.
475 */
476#define PHY_CSR8 0x04d0
477#define PHY_CSR8_BUSY FIELD16(0x0001)
478
479/*
480 * PHY_CSR9: RF access register.
481 * RF_VALUE: Register value + id to program into rf/if.
482 */
483#define PHY_CSR9 0x04d2
484#define PHY_CSR9_RF_VALUE FIELD16(0xffff)
485
486/*
487 * PHY_CSR10: RF access register.
488 * RF_VALUE: Register value + id to program into rf/if.
489 * RF_NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22).
490 * RF_IF_SELECT: Chip to program: 0: rf, 1: if.
491 * RF_PLL_LD: Rf pll_ld status.
492 * RF_BUSY: 1: asic is busy execute rf programming.
493 */
494#define PHY_CSR10 0x04d4
495#define PHY_CSR10_RF_VALUE FIELD16(0x00ff)
496#define PHY_CSR10_RF_NUMBER_OF_BITS FIELD16(0x1f00)
497#define PHY_CSR10_RF_IF_SELECT FIELD16(0x2000)
498#define PHY_CSR10_RF_PLL_LD FIELD16(0x4000)
499#define PHY_CSR10_RF_BUSY FIELD16(0x8000)
500
501/*
502 * STA_CSR0: FCS error count.
503 * FCS_ERROR: FCS error count, cleared when read.
504 */
505#define STA_CSR0 0x04e0
506#define STA_CSR0_FCS_ERROR FIELD16(0xffff)
507
508/*
509 * STA_CSR1: PLCP error count.
510 */
511#define STA_CSR1 0x04e2
512
513/*
514 * STA_CSR2: LONG error count.
515 */
516#define STA_CSR2 0x04e4
517
518/*
519 * STA_CSR3: CCA false alarm.
520 * FALSE_CCA_ERROR: False CCA error count, cleared when read.
521 */
522#define STA_CSR3 0x04e6
523#define STA_CSR3_FALSE_CCA_ERROR FIELD16(0xffff)
524
525/*
526 * STA_CSR4: RX FIFO overflow.
527 */
528#define STA_CSR4 0x04e8
529
530/*
531 * STA_CSR5: Beacon sent counter.
532 */
533#define STA_CSR5 0x04ea
534
535/*
536 * Statistics registers
537 */
538#define STA_CSR6 0x04ec
539#define STA_CSR7 0x04ee
540#define STA_CSR8 0x04f0
541#define STA_CSR9 0x04f2
542#define STA_CSR10 0x04f4
543
544/*
545 * BBP registers.
546 * The wordsize of the BBP is 8 bits.
547 */
548
549/*
550 * R2: TX antenna control
551 */
552#define BBP_R2_TX_ANTENNA FIELD8(0x03)
553#define BBP_R2_TX_IQ_FLIP FIELD8(0x04)
554
555/*
556 * R14: RX antenna control
557 */
558#define BBP_R14_RX_ANTENNA FIELD8(0x03)
559#define BBP_R14_RX_IQ_FLIP FIELD8(0x04)
560
561/*
562 * RF registers.
563 */
564
565/*
566 * RF 1
567 */
568#define RF1_TUNER FIELD32(0x00020000)
569
570/*
571 * RF 3
572 */
573#define RF3_TUNER FIELD32(0x00000100)
574#define RF3_TXPOWER FIELD32(0x00003e00)
575
576/*
577 * EEPROM contents.
578 */
579
580/*
581 * HW MAC address.
582 */
583#define EEPROM_MAC_ADDR_0 0x0002
584#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
585#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
586#define EEPROM_MAC_ADDR1 0x0003
587#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
588#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
589#define EEPROM_MAC_ADDR_2 0x0004
590#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
591#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
592
593/*
594 * EEPROM antenna.
595 * ANTENNA_NUM: Number of antenna's.
596 * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
597 * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
598 * LED_MODE: 0: default, 1: TX/RX activity, 2: Single (ignore link), 3: rsvd.
599 * DYN_TXAGC: Dynamic TX AGC control.
600 * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
601 * RF_TYPE: Rf_type of this adapter.
602 */
603#define EEPROM_ANTENNA 0x000b
604#define EEPROM_ANTENNA_NUM FIELD16(0x0003)
605#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
606#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
607#define EEPROM_ANTENNA_LED_MODE FIELD16(0x01c0)
608#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200)
609#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
610#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800)
611
612/*
613 * EEPROM NIC config.
614 * CARDBUS_ACCEL: 0: enable, 1: disable.
615 * DYN_BBP_TUNE: 0: enable, 1: disable.
616 * CCK_TX_POWER: CCK TX power compensation.
617 */
618#define EEPROM_NIC 0x000c
619#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0001)
620#define EEPROM_NIC_DYN_BBP_TUNE FIELD16(0x0002)
621#define EEPROM_NIC_CCK_TX_POWER FIELD16(0x000c)
622
623/*
624 * EEPROM geography.
625 * GEO: Default geography setting for device.
626 */
627#define EEPROM_GEOGRAPHY 0x000d
628#define EEPROM_GEOGRAPHY_GEO FIELD16(0x0f00)
629
630/*
631 * EEPROM BBP.
632 */
633#define EEPROM_BBP_START 0x000e
634#define EEPROM_BBP_SIZE 16
635#define EEPROM_BBP_VALUE FIELD16(0x00ff)
636#define EEPROM_BBP_REG_ID FIELD16(0xff00)
637
638/*
639 * EEPROM TXPOWER
640 */
641#define EEPROM_TXPOWER_START 0x001e
642#define EEPROM_TXPOWER_SIZE 7
643#define EEPROM_TXPOWER_1 FIELD16(0x00ff)
644#define EEPROM_TXPOWER_2 FIELD16(0xff00)
645
646/*
647 * EEPROM Tuning threshold
648 */
649#define EEPROM_BBPTUNE 0x0030
650#define EEPROM_BBPTUNE_THRESHOLD FIELD16(0x00ff)
651
652/*
653 * EEPROM BBP R24 Tuning.
654 */
655#define EEPROM_BBPTUNE_R24 0x0031
656#define EEPROM_BBPTUNE_R24_LOW FIELD16(0x00ff)
657#define EEPROM_BBPTUNE_R24_HIGH FIELD16(0xff00)
658
659/*
660 * EEPROM BBP R25 Tuning.
661 */
662#define EEPROM_BBPTUNE_R25 0x0032
663#define EEPROM_BBPTUNE_R25_LOW FIELD16(0x00ff)
664#define EEPROM_BBPTUNE_R25_HIGH FIELD16(0xff00)
665
666/*
667 * EEPROM BBP R24 Tuning.
668 */
669#define EEPROM_BBPTUNE_R61 0x0033
670#define EEPROM_BBPTUNE_R61_LOW FIELD16(0x00ff)
671#define EEPROM_BBPTUNE_R61_HIGH FIELD16(0xff00)
672
673/*
674 * EEPROM BBP VGC Tuning.
675 */
676#define EEPROM_BBPTUNE_VGC 0x0034
677#define EEPROM_BBPTUNE_VGCUPPER FIELD16(0x00ff)
678
679/*
680 * EEPROM BBP R17 Tuning.
681 */
682#define EEPROM_BBPTUNE_R17 0x0035
683#define EEPROM_BBPTUNE_R17_LOW FIELD16(0x00ff)
684#define EEPROM_BBPTUNE_R17_HIGH FIELD16(0xff00)
685
686/*
687 * RSSI <-> dBm offset calibration
688 */
689#define EEPROM_CALIBRATE_OFFSET 0x0036
690#define EEPROM_CALIBRATE_OFFSET_RSSI FIELD16(0x00ff)
691
692/*
693 * DMA descriptor defines.
694 */
695#define TXD_DESC_SIZE ( 5 * sizeof(struct data_desc) )
696#define RXD_DESC_SIZE ( 4 * sizeof(struct data_desc) )
697
698/*
699 * TX descriptor format for TX, PRIO, ATIM and Beacon Ring.
700 */
701
702/*
703 * Word0
704 */
705#define TXD_W0_PACKET_ID FIELD32(0x0000000f)
706#define TXD_W0_RETRY_LIMIT FIELD32(0x000000f0)
707#define TXD_W0_MORE_FRAG FIELD32(0x00000100)
708#define TXD_W0_ACK FIELD32(0x00000200)
709#define TXD_W0_TIMESTAMP FIELD32(0x00000400)
710#define TXD_W0_OFDM FIELD32(0x00000800)
711#define TXD_W0_NEW_SEQ FIELD32(0x00001000)
712#define TXD_W0_IFS FIELD32(0x00006000)
713#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
714#define TXD_W0_CIPHER FIELD32(0x20000000)
715#define TXD_W0_KEY_ID FIELD32(0xc0000000)
716
717/*
718 * Word1
719 */
720#define TXD_W1_IV_OFFSET FIELD32(0x0000003f)
721#define TXD_W1_AIFS FIELD32(0x000000c0)
722#define TXD_W1_CWMIN FIELD32(0x00000f00)
723#define TXD_W1_CWMAX FIELD32(0x0000f000)
724
725/*
726 * Word2: PLCP information
727 */
728#define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff)
729#define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00)
730#define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000)
731#define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000)
732
733/*
734 * Word3
735 */
736#define TXD_W3_IV FIELD32(0xffffffff)
737
738/*
739 * Word4
740 */
741#define TXD_W4_EIV FIELD32(0xffffffff)
742
743/*
744 * RX descriptor format for RX Ring.
745 */
746
747/*
748 * Word0
749 */
750#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002)
751#define RXD_W0_MULTICAST FIELD32(0x00000004)
752#define RXD_W0_BROADCAST FIELD32(0x00000008)
753#define RXD_W0_MY_BSS FIELD32(0x00000010)
754#define RXD_W0_CRC_ERROR FIELD32(0x00000020)
755#define RXD_W0_OFDM FIELD32(0x00000040)
756#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080)
757#define RXD_W0_CIPHER FIELD32(0x00000100)
758#define RXD_W0_CIPHER_ERROR FIELD32(0x00000200)
759#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
760
761/*
762 * Word1
763 */
764#define RXD_W1_RSSI FIELD32(0x000000ff)
765#define RXD_W1_SIGNAL FIELD32(0x0000ff00)
766
767/*
768 * Word2
769 */
770#define RXD_W2_IV FIELD32(0xffffffff)
771
772/*
773 * Word3
774 */
775#define RXD_W3_EIV FIELD32(0xffffffff)
776
777/*
778 * Macro's for converting txpower from EEPROM to dscape value
779 * and from dscape value to register value.
780 */
781#define MIN_TXPOWER 0
782#define MAX_TXPOWER 31
783#define DEFAULT_TXPOWER 24
784
785#define TXPOWER_FROM_DEV(__txpower) \
786({ \
787 ((__txpower) > MAX_TXPOWER) ? \
788 DEFAULT_TXPOWER : (__txpower); \
789})
790
791#define TXPOWER_TO_DEV(__txpower) \
792({ \
793 ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
794 (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
795 (__txpower)); \
796})
797
798#endif /* RT2500USB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
new file mode 100644
index 000000000000..80b079d723d6
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -0,0 +1,807 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00
23 Abstract: rt2x00 global information.
24 */
25
26#ifndef RT2X00_H
27#define RT2X00_H
28
29#include <linux/bitops.h>
30#include <linux/prefetch.h>
31#include <linux/skbuff.h>
32#include <linux/workqueue.h>
33#include <linux/firmware.h>
34
35#include <net/mac80211.h>
36
37#include "rt2x00debug.h"
38#include "rt2x00reg.h"
39#include "rt2x00ring.h"
40
41/*
42 * Module information.
43 * DRV_NAME should be set within the individual module source files.
44 */
45#define DRV_VERSION "2.0.8"
46#define DRV_PROJECT "http://rt2x00.serialmonkey.com"
47
48/*
49 * Debug definitions.
50 * Debug output has to be enabled during compile time.
51 */
52#define DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, __args...) \
53 printk(__kernlvl "%s -> %s: %s - " __msg, \
54 wiphy_name((__dev)->hw->wiphy), __FUNCTION__, __lvl, ##__args)
55
56#define DEBUG_PRINTK_PROBE(__kernlvl, __lvl, __msg, __args...) \
57 printk(__kernlvl "%s -> %s: %s - " __msg, \
58 DRV_NAME, __FUNCTION__, __lvl, ##__args)
59
60#ifdef CONFIG_RT2X00_DEBUG
61#define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
62 DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, ##__args);
63#else
64#define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
65 do { } while (0)
66#endif /* CONFIG_RT2X00_DEBUG */
67
68/*
69 * Various debug levels.
70 * The debug levels PANIC and ERROR both indicate serious problems,
71 * for this reason they should never be ignored.
72 * The special ERROR_PROBE message is for messages that are generated
73 * when the rt2x00_dev is not yet initialized.
74 */
75#define PANIC(__dev, __msg, __args...) \
76 DEBUG_PRINTK_MSG(__dev, KERN_CRIT, "Panic", __msg, ##__args)
77#define ERROR(__dev, __msg, __args...) \
78 DEBUG_PRINTK_MSG(__dev, KERN_ERR, "Error", __msg, ##__args)
79#define ERROR_PROBE(__msg, __args...) \
80 DEBUG_PRINTK_PROBE(KERN_ERR, "Error", __msg, ##__args)
81#define WARNING(__dev, __msg, __args...) \
82 DEBUG_PRINTK(__dev, KERN_WARNING, "Warning", __msg, ##__args)
83#define NOTICE(__dev, __msg, __args...) \
84 DEBUG_PRINTK(__dev, KERN_NOTICE, "Notice", __msg, ##__args)
85#define INFO(__dev, __msg, __args...) \
86 DEBUG_PRINTK(__dev, KERN_INFO, "Info", __msg, ##__args)
87#define DEBUG(__dev, __msg, __args...) \
88 DEBUG_PRINTK(__dev, KERN_DEBUG, "Debug", __msg, ##__args)
89#define EEPROM(__dev, __msg, __args...) \
90 DEBUG_PRINTK(__dev, KERN_DEBUG, "EEPROM recovery", __msg, ##__args)
91
92/*
93 * Ring sizes.
94 * Ralink PCI devices demand the Frame size to be a multiple of 128 bytes.
95 * DATA_FRAME_SIZE is used for TX, RX, ATIM and PRIO rings.
96 * MGMT_FRAME_SIZE is used for the BEACON ring.
97 */
98#define DATA_FRAME_SIZE 2432
99#define MGMT_FRAME_SIZE 256
100
101/*
102 * Number of entries in a packet ring.
103 * PCI devices only need 1 Beacon entry,
104 * but USB devices require a second because they
105 * have to send a Guardian byte first.
106 */
107#define RX_ENTRIES 12
108#define TX_ENTRIES 12
109#define ATIM_ENTRIES 1
110#define BEACON_ENTRIES 2
111
112/*
113 * Standard timing and size defines.
114 * These values should follow the ieee80211 specifications.
115 */
116#define ACK_SIZE 14
117#define IEEE80211_HEADER 24
118#define PLCP 48
119#define BEACON 100
120#define PREAMBLE 144
121#define SHORT_PREAMBLE 72
122#define SLOT_TIME 20
123#define SHORT_SLOT_TIME 9
124#define SIFS 10
125#define PIFS ( SIFS + SLOT_TIME )
126#define SHORT_PIFS ( SIFS + SHORT_SLOT_TIME )
127#define DIFS ( PIFS + SLOT_TIME )
128#define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME )
129#define EIFS ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) )
130
131/*
132 * IEEE802.11 header defines
133 */
134static inline int is_rts_frame(u16 fc)
135{
136 return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) &&
137 ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_RTS));
138}
139
140static inline int is_cts_frame(u16 fc)
141{
142 return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) &&
143 ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_CTS));
144}
145
146static inline int is_probe_resp(u16 fc)
147{
148 return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) &&
149 ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP));
150}
151
152/*
153 * Chipset identification
154 * The chipset on the device is composed of a RT and RF chip.
155 * The chipset combination is important for determining device capabilities.
156 */
157struct rt2x00_chip {
158 u16 rt;
159#define RT2460 0x0101
160#define RT2560 0x0201
161#define RT2570 0x1201
162#define RT2561 0x0301
163#define RT2561s 0x0302
164#define RT2661 0x0401
165#define RT2571 0x1300
166
167 u16 rf;
168 u32 rev;
169};
170
171/*
172 * RF register values that belong to a particular channel.
173 */
174struct rf_channel {
175 int channel;
176 u32 rf1;
177 u32 rf2;
178 u32 rf3;
179 u32 rf4;
180};
181
182/*
183 * To optimize the quality of the link we need to store
184 * the quality of received frames and periodically
185 * optimize the link.
186 */
187struct link {
188 /*
189 * Link tuner counter
190 * The number of times the link has been tuned
191 * since the radio has been switched on.
192 */
193 u32 count;
194
195 /*
196 * Statistics required for Link tuning.
197 * For the average RSSI value we use the "Walking average" approach.
198 * When adding RSSI to the average value the following calculation
199 * is needed:
200 *
201 * avg_rssi = ((avg_rssi * 7) + rssi) / 8;
202 *
203 * The advantage of this approach is that we only need 1 variable
204 * to store the average in (No need for a count and a total).
205 * But more importantly, normal average values will over time
206 * move less and less towards newly added values this results
207 * that with link tuning, the device can have a very good RSSI
208 * for a few minutes but when the device is moved away from the AP
209 * the average will not decrease fast enough to compensate.
210 * The walking average compensates this and will move towards
211 * the new values correctly allowing a effective link tuning.
212 */
213 int avg_rssi;
214 int vgc_level;
215 int false_cca;
216
217 /*
218 * Statistics required for Signal quality calculation.
219 * For calculating the Signal quality we have to determine
220 * the total number of success and failed RX and TX frames.
221 * After that we also use the average RSSI value to help
222 * determining the signal quality.
223 * For the calculation we will use the following algorithm:
224 *
225 * rssi_percentage = (avg_rssi * 100) / rssi_offset
226 * rx_percentage = (rx_success * 100) / rx_total
227 * tx_percentage = (tx_success * 100) / tx_total
228 * avg_signal = ((WEIGHT_RSSI * avg_rssi) +
229 * (WEIGHT_TX * tx_percentage) +
230 * (WEIGHT_RX * rx_percentage)) / 100
231 *
232 * This value should then be checked to not be greated then 100.
233 */
234 int rx_percentage;
235 int rx_success;
236 int rx_failed;
237 int tx_percentage;
238 int tx_success;
239 int tx_failed;
240#define WEIGHT_RSSI 20
241#define WEIGHT_RX 40
242#define WEIGHT_TX 40
243
244 /*
245 * Work structure for scheduling periodic link tuning.
246 */
247 struct delayed_work work;
248};
249
250/*
251 * Clear all counters inside the link structure.
252 * This can be easiest achieved by memsetting everything
253 * except for the work structure at the end.
254 */
255static inline void rt2x00_clear_link(struct link *link)
256{
257 memset(link, 0x00, sizeof(*link) - sizeof(link->work));
258 link->rx_percentage = 50;
259 link->tx_percentage = 50;
260}
261
262/*
263 * Update the rssi using the walking average approach.
264 */
265static inline void rt2x00_update_link_rssi(struct link *link, int rssi)
266{
267 if (!link->avg_rssi)
268 link->avg_rssi = rssi;
269 else
270 link->avg_rssi = ((link->avg_rssi * 7) + rssi) / 8;
271}
272
273/*
274 * When the avg_rssi is unset or no frames have been received),
275 * we need to return the default value which needs to be less
276 * than -80 so the device will select the maximum sensitivity.
277 */
278static inline int rt2x00_get_link_rssi(struct link *link)
279{
280 return (link->avg_rssi && link->rx_success) ? link->avg_rssi : -128;
281}
282
283/*
284 * Interface structure
285 * Configuration details about the current interface.
286 */
287struct interface {
288 /*
289 * Interface identification. The value is assigned
290 * to us by the 80211 stack, and is used to request
291 * new beacons.
292 */
293 int id;
294
295 /*
296 * Current working type (IEEE80211_IF_TYPE_*).
297 * This excludes the type IEEE80211_IF_TYPE_MNTR
298 * since that is counted seperately in the monitor_count
299 * field.
300 * When set to INVALID_INTERFACE, no interface is configured.
301 */
302 int type;
303#define INVALID_INTERFACE IEEE80211_IF_TYPE_MGMT
304
305 /*
306 * MAC of the device.
307 */
308 u8 mac[ETH_ALEN];
309
310 /*
311 * BBSID of the AP to associate with.
312 */
313 u8 bssid[ETH_ALEN];
314
315 /*
316 * Store the packet filter mode for the current interface.
317 * monitor mode always disabled filtering. But in such
318 * cases we still need to store the value here in case
319 * the monitor mode interfaces are removed, while a
320 * non-monitor mode interface remains.
321 */
322 unsigned short filter;
323
324 /*
325 * Monitor mode count, the number of interfaces
326 * in monitor mode that that have been added.
327 */
328 unsigned short monitor_count;
329};
330
331static inline int is_interface_present(struct interface *intf)
332{
333 return !!intf->id;
334}
335
336static inline int is_monitor_present(struct interface *intf)
337{
338 return !!intf->monitor_count;
339}
340
341/*
342 * Details about the supported modes, rates and channels
343 * of a particular chipset. This is used by rt2x00lib
344 * to build the ieee80211_hw_mode array for mac80211.
345 */
346struct hw_mode_spec {
347 /*
348 * Number of modes, rates and channels.
349 */
350 int num_modes;
351 int num_rates;
352 int num_channels;
353
354 /*
355 * txpower values.
356 */
357 const u8 *tx_power_a;
358 const u8 *tx_power_bg;
359 u8 tx_power_default;
360
361 /*
362 * Device/chipset specific value.
363 */
364 const struct rf_channel *channels;
365};
366
367/*
368 * rt2x00lib callback functions.
369 */
370struct rt2x00lib_ops {
371 /*
372 * Interrupt handlers.
373 */
374 irq_handler_t irq_handler;
375
376 /*
377 * Device init handlers.
378 */
379 int (*probe_hw) (struct rt2x00_dev *rt2x00dev);
380 char *(*get_firmware_name) (struct rt2x00_dev *rt2x00dev);
381 int (*load_firmware) (struct rt2x00_dev *rt2x00dev, void *data,
382 const size_t len);
383
384 /*
385 * Device initialization/deinitialization handlers.
386 */
387 int (*initialize) (struct rt2x00_dev *rt2x00dev);
388 void (*uninitialize) (struct rt2x00_dev *rt2x00dev);
389
390 /*
391 * Radio control handlers.
392 */
393 int (*set_device_state) (struct rt2x00_dev *rt2x00dev,
394 enum dev_state state);
395 int (*rfkill_poll) (struct rt2x00_dev *rt2x00dev);
396 void (*link_stats) (struct rt2x00_dev *rt2x00dev);
397 void (*reset_tuner) (struct rt2x00_dev *rt2x00dev);
398 void (*link_tuner) (struct rt2x00_dev *rt2x00dev);
399
400 /*
401 * TX control handlers
402 */
403 void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev,
404 struct data_desc *txd,
405 struct data_entry_desc *desc,
406 struct ieee80211_hdr *ieee80211hdr,
407 unsigned int length,
408 struct ieee80211_tx_control *control);
409 int (*write_tx_data) (struct rt2x00_dev *rt2x00dev,
410 struct data_ring *ring, struct sk_buff *skb,
411 struct ieee80211_tx_control *control);
412 void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev,
413 unsigned int queue);
414
415 /*
416 * RX control handlers
417 */
418 int (*fill_rxdone) (struct data_entry *entry,
419 int *signal, int *rssi, int *ofdm, int *size);
420
421 /*
422 * Configuration handlers.
423 */
424 void (*config_mac_addr) (struct rt2x00_dev *rt2x00dev, u8 *mac);
425 void (*config_bssid) (struct rt2x00_dev *rt2x00dev, u8 *bssid);
426 void (*config_packet_filter) (struct rt2x00_dev *rt2x00dev,
427 const unsigned int filter);
428 void (*config_type) (struct rt2x00_dev *rt2x00dev, const int type);
429 void (*config) (struct rt2x00_dev *rt2x00dev, const unsigned int flags,
430 struct ieee80211_conf *conf);
431#define CONFIG_UPDATE_PHYMODE ( 1 << 1 )
432#define CONFIG_UPDATE_CHANNEL ( 1 << 2 )
433#define CONFIG_UPDATE_TXPOWER ( 1 << 3 )
434#define CONFIG_UPDATE_ANTENNA ( 1 << 4 )
435#define CONFIG_UPDATE_SLOT_TIME ( 1 << 5 )
436#define CONFIG_UPDATE_BEACON_INT ( 1 << 6 )
437#define CONFIG_UPDATE_ALL 0xffff
438};
439
440/*
441 * rt2x00 driver callback operation structure.
442 */
443struct rt2x00_ops {
444 const char *name;
445 const unsigned int rxd_size;
446 const unsigned int txd_size;
447 const unsigned int eeprom_size;
448 const unsigned int rf_size;
449 const struct rt2x00lib_ops *lib;
450 const struct ieee80211_ops *hw;
451#ifdef CONFIG_RT2X00_LIB_DEBUGFS
452 const struct rt2x00debug *debugfs;
453#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
454};
455
456/*
457 * rt2x00 device structure.
458 */
459struct rt2x00_dev {
460 /*
461 * Device structure.
462 * The structure stored in here depends on the
463 * system bus (PCI or USB).
464 * When accessing this variable, the rt2x00dev_{pci,usb}
465 * macro's should be used for correct typecasting.
466 */
467 void *dev;
468#define rt2x00dev_pci(__dev) ( (struct pci_dev*)(__dev)->dev )
469#define rt2x00dev_usb(__dev) ( (struct usb_interface*)(__dev)->dev )
470
471 /*
472 * Callback functions.
473 */
474 const struct rt2x00_ops *ops;
475
476 /*
477 * IEEE80211 control structure.
478 */
479 struct ieee80211_hw *hw;
480 struct ieee80211_hw_mode *hwmodes;
481 unsigned int curr_hwmode;
482#define HWMODE_B 0
483#define HWMODE_G 1
484#define HWMODE_A 2
485
486 /*
487 * rfkill structure for RF state switching support.
488 * This will only be compiled in when required.
489 */
490#ifdef CONFIG_RT2X00_LIB_RFKILL
491 struct rfkill *rfkill;
492 struct input_polled_dev *poll_dev;
493#endif /* CONFIG_RT2X00_LIB_RFKILL */
494
495 /*
496 * If enabled, the debugfs interface structures
497 * required for deregistration of debugfs.
498 */
499#ifdef CONFIG_RT2X00_LIB_DEBUGFS
500 const struct rt2x00debug_intf *debugfs_intf;
501#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
502
503 /*
504 * Device flags.
505 * In these flags the current status and some
506 * of the device capabilities are stored.
507 */
508 unsigned long flags;
509#define DEVICE_ENABLED_RADIO 1
510#define DEVICE_ENABLED_RADIO_HW 2
511#define DEVICE_INITIALIZED 3
512#define DEVICE_INITIALIZED_HW 4
513#define REQUIRE_FIRMWARE 5
514#define PACKET_FILTER_SCHEDULED 6
515#define PACKET_FILTER_PENDING 7
516#define INTERFACE_RESUME 8
517#define INTERFACE_ENABLED 9
518#define INTERFACE_ENABLED_MONITOR 10
519#define REQUIRE_BEACON_RING 11
520#define DEVICE_SUPPORT_HW_BUTTON 12
521#define CONFIG_FRAME_TYPE 13
522#define CONFIG_RF_SEQUENCE 14
523/* Hole: Add new Flag here */
524#define CONFIG_EXTERNAL_LNA_A 16
525#define CONFIG_EXTERNAL_LNA_BG 17
526#define CONFIG_DOUBLE_ANTENNA 18
527#define CONFIG_DISABLE_LINK_TUNING 19
528
529 /*
530 * Chipset identification.
531 */
532 struct rt2x00_chip chip;
533
534 /*
535 * hw capability specifications.
536 */
537 struct hw_mode_spec spec;
538
539 /*
540 * Register pointers
541 * csr_addr: Base register address. (PCI)
542 * csr_cache: CSR cache for usb_control_msg. (USB)
543 */
544 void __iomem *csr_addr;
545 void *csr_cache;
546
547 /*
548 * Interface configuration.
549 */
550 struct interface interface;
551
552 /*
553 * Link quality
554 */
555 struct link link;
556
557 /*
558 * EEPROM data.
559 */
560 __le16 *eeprom;
561
562 /*
563 * Active RF register values.
564 * These are stored here so we don't need
565 * to read the rf registers and can directly
566 * use this value instead.
567 * This field should be accessed by using
568 * rt2x00_rf_read() and rt2x00_rf_write().
569 */
570 u32 *rf;
571
572 /*
573 * Current TX power value.
574 */
575 u16 tx_power;
576
577 /*
578 * LED register (for rt61pci & rt73usb).
579 */
580 u16 led_reg;
581
582 /*
583 * Led mode (LED_MODE_*)
584 */
585 u8 led_mode;
586
587 /*
588 * Rssi <-> Dbm offset
589 */
590 u8 rssi_offset;
591
592 /*
593 * Frequency offset (for rt61pci & rt73usb).
594 */
595 u8 freq_offset;
596
597 /*
598 * Low level statistics which will have
599 * to be kept up to date while device is running.
600 */
601 struct ieee80211_low_level_stats low_level_stats;
602
603 /*
604 * RX configuration information.
605 */
606 struct ieee80211_rx_status rx_status;
607
608 /*
609 * Beacon scheduled work.
610 */
611 struct work_struct beacon_work;
612
613 /*
614 * Data ring arrays for RX, TX and Beacon.
615 * The Beacon array also contains the Atim ring
616 * if that is supported by the device.
617 */
618 int data_rings;
619 struct data_ring *rx;
620 struct data_ring *tx;
621 struct data_ring *bcn;
622
623 /*
624 * Firmware image.
625 */
626 const struct firmware *fw;
627};
628
629/*
630 * For-each loop for the ring array.
631 * All rings have been allocated as a single array,
632 * this means we can create a very simply loop macro
633 * that is capable of looping through all rings.
634 * ring_end(), txring_end() and ring_loop() are helper macro's which
635 * should not be used directly. Instead the following should be used:
636 * ring_for_each() - Loops through all rings (RX, TX, Beacon & Atim)
637 * txring_for_each() - Loops through TX data rings (TX only)
638 * txringall_for_each() - Loops through all TX rings (TX, Beacon & Atim)
639 */
640#define ring_end(__dev) \
641 &(__dev)->rx[(__dev)->data_rings]
642
643#define txring_end(__dev) \
644 &(__dev)->tx[(__dev)->hw->queues]
645
646#define ring_loop(__entry, __start, __end) \
647 for ((__entry) = (__start); \
648 prefetch(&(__entry)[1]), (__entry) != (__end); \
649 (__entry) = &(__entry)[1])
650
651#define ring_for_each(__dev, __entry) \
652 ring_loop(__entry, (__dev)->rx, ring_end(__dev))
653
654#define txring_for_each(__dev, __entry) \
655 ring_loop(__entry, (__dev)->tx, txring_end(__dev))
656
657#define txringall_for_each(__dev, __entry) \
658 ring_loop(__entry, (__dev)->tx, ring_end(__dev))
659
660/*
661 * Generic RF access.
662 * The RF is being accessed by word index.
663 */
664static inline void rt2x00_rf_read(const struct rt2x00_dev *rt2x00dev,
665 const unsigned int word, u32 *data)
666{
667 *data = rt2x00dev->rf[word];
668}
669
670static inline void rt2x00_rf_write(const struct rt2x00_dev *rt2x00dev,
671 const unsigned int word, u32 data)
672{
673 rt2x00dev->rf[word] = data;
674}
675
676/*
677 * Generic EEPROM access.
678 * The EEPROM is being accessed by word index.
679 */
680static inline void *rt2x00_eeprom_addr(const struct rt2x00_dev *rt2x00dev,
681 const unsigned int word)
682{
683 return (void *)&rt2x00dev->eeprom[word];
684}
685
686static inline void rt2x00_eeprom_read(const struct rt2x00_dev *rt2x00dev,
687 const unsigned int word, u16 *data)
688{
689 *data = le16_to_cpu(rt2x00dev->eeprom[word]);
690}
691
692static inline void rt2x00_eeprom_write(const struct rt2x00_dev *rt2x00dev,
693 const unsigned int word, u16 data)
694{
695 rt2x00dev->eeprom[word] = cpu_to_le16(data);
696}
697
698/*
699 * Chipset handlers
700 */
701static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev,
702 const u16 rt, const u16 rf, const u32 rev)
703{
704 INFO(rt2x00dev,
705 "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n",
706 rt, rf, rev);
707
708 rt2x00dev->chip.rt = rt;
709 rt2x00dev->chip.rf = rf;
710 rt2x00dev->chip.rev = rev;
711}
712
713static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip)
714{
715 return (chipset->rt == chip);
716}
717
718static inline char rt2x00_rf(const struct rt2x00_chip *chipset, const u16 chip)
719{
720 return (chipset->rf == chip);
721}
722
723static inline u16 rt2x00_get_rev(const struct rt2x00_chip *chipset)
724{
725 return chipset->rev;
726}
727
728static inline u16 rt2x00_rev(const struct rt2x00_chip *chipset, const u32 mask)
729{
730 return chipset->rev & mask;
731}
732
733/*
734 * Duration calculations
735 * The rate variable passed is: 100kbs.
736 * To convert from bytes to bits we multiply size with 8,
737 * then the size is multiplied with 10 to make the
738 * real rate -> rate argument correction.
739 */
740static inline u16 get_duration(const unsigned int size, const u8 rate)
741{
742 return ((size * 8 * 10) / rate);
743}
744
745static inline u16 get_duration_res(const unsigned int size, const u8 rate)
746{
747 return ((size * 8 * 10) % rate);
748}
749
750/*
751 * Library functions.
752 */
753struct data_ring *rt2x00lib_get_ring(struct rt2x00_dev *rt2x00dev,
754 const unsigned int queue);
755
756/*
757 * Interrupt context handlers.
758 */
759void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev);
760void rt2x00lib_txdone(struct data_entry *entry,
761 const int status, const int retry);
762void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb,
763 const int signal, const int rssi, const int ofdm);
764
765/*
766 * TX descriptor initializer
767 */
768void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev,
769 struct data_desc *txd,
770 struct ieee80211_hdr *ieee80211hdr,
771 unsigned int length,
772 struct ieee80211_tx_control *control);
773
774/*
775 * mac80211 handlers.
776 */
777int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
778 struct ieee80211_tx_control *control);
779int rt2x00mac_start(struct ieee80211_hw *hw);
780void rt2x00mac_stop(struct ieee80211_hw *hw);
781int rt2x00mac_add_interface(struct ieee80211_hw *hw,
782 struct ieee80211_if_init_conf *conf);
783void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
784 struct ieee80211_if_init_conf *conf);
785int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
786int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id,
787 struct ieee80211_if_conf *conf);
788void rt2x00mac_set_multicast_list(struct ieee80211_hw *hw,
789 unsigned short flags, int mc_count);
790int rt2x00mac_get_stats(struct ieee80211_hw *hw,
791 struct ieee80211_low_level_stats *stats);
792int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
793 struct ieee80211_tx_queue_stats *stats);
794int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue,
795 const struct ieee80211_tx_queue_params *params);
796
797/*
798 * Driver allocation handlers.
799 */
800int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev);
801void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev);
802#ifdef CONFIG_PM
803int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state);
804int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev);
805#endif /* CONFIG_PM */
806
807#endif /* RT2X00_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
new file mode 100644
index 000000000000..de890a17d8fd
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -0,0 +1,165 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00lib
23 Abstract: rt2x00 generic configuration routines.
24 */
25
26/*
27 * Set enviroment defines for rt2x00.h
28 */
29#define DRV_NAME "rt2x00lib"
30
31#include <linux/kernel.h>
32#include <linux/module.h>
33
34#include "rt2x00.h"
35#include "rt2x00lib.h"
36
37void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac)
38{
39 if (mac)
40 rt2x00dev->ops->lib->config_mac_addr(rt2x00dev, mac);
41}
42
43void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
44{
45 if (bssid)
46 rt2x00dev->ops->lib->config_bssid(rt2x00dev, bssid);
47}
48
49void rt2x00lib_config_packet_filter(struct rt2x00_dev *rt2x00dev, int filter)
50{
51 /*
52 * Only configure the device when something has changed,
53 * or if we are in RESUME state in which case all configuration
54 * will be forced upon the device.
55 */
56 if (!test_bit(INTERFACE_RESUME, &rt2x00dev->flags) &&
57 !test_bit(PACKET_FILTER_PENDING, &rt2x00dev->flags))
58 return;
59
60 /*
61 * Write configuration to device and clear the update flag.
62 */
63 rt2x00dev->ops->lib->config_packet_filter(rt2x00dev, filter);
64 __clear_bit(PACKET_FILTER_PENDING, &rt2x00dev->flags);
65}
66
67void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, int type)
68{
69 struct interface *intf = &rt2x00dev->interface;
70
71 /*
72 * Fallback when a invalid interface is attempted to
73 * be configured. If a monitor interface is present,
74 * we are going configure that, otherwise exit.
75 */
76 if (type == INVALID_INTERFACE) {
77 if (is_monitor_present(intf))
78 type = IEEE80211_IF_TYPE_MNTR;
79 else
80 return;
81 }
82
83 /*
84 * Only configure the device when something has changed,
85 * or if we are in RESUME state in which case all configuration
86 * will be forced upon the device.
87 */
88 if (!test_bit(INTERFACE_RESUME, &rt2x00dev->flags) &&
89 (!(is_interface_present(intf) ^
90 test_bit(INTERFACE_ENABLED, &rt2x00dev->flags)) &&
91 !(is_monitor_present(intf) ^
92 test_bit(INTERFACE_ENABLED_MONITOR, &rt2x00dev->flags))))
93 return;
94
95 /*
96 * Configure device.
97 */
98 rt2x00dev->ops->lib->config_type(rt2x00dev, type);
99
100 /*
101 * Update the configuration flags.
102 */
103 if (type != IEEE80211_IF_TYPE_MNTR) {
104 if (is_interface_present(intf))
105 __set_bit(INTERFACE_ENABLED, &rt2x00dev->flags);
106 else
107 __clear_bit(INTERFACE_ENABLED, &rt2x00dev->flags);
108 } else {
109 if (is_monitor_present(intf))
110 __set_bit(INTERFACE_ENABLED_MONITOR, &rt2x00dev->flags);
111 else
112 __clear_bit(INTERFACE_ENABLED_MONITOR,
113 &rt2x00dev->flags);
114 }
115}
116
117void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf)
118{
119 int flags = 0;
120
121 /*
122 * If we are in RESUME state we should
123 * force all configuration options.
124 */
125 if (test_bit(INTERFACE_RESUME, &rt2x00dev->flags)) {
126 flags = CONFIG_UPDATE_ALL;
127 goto config;
128 }
129
130 /*
131 * Check which configuration options have been
132 * updated and should be send to the device.
133 */
134 if (rt2x00dev->rx_status.phymode != conf->phymode)
135 flags |= CONFIG_UPDATE_PHYMODE;
136 if (rt2x00dev->rx_status.channel != conf->channel)
137 flags |= CONFIG_UPDATE_CHANNEL;
138 if (rt2x00dev->tx_power != conf->power_level)
139 flags |= CONFIG_UPDATE_TXPOWER;
140 if (rt2x00dev->rx_status.antenna == conf->antenna_sel_rx)
141 flags |= CONFIG_UPDATE_ANTENNA;
142
143 /*
144 * The following configuration options are never
145 * stored anywhere and will always be updated.
146 */
147 flags |= CONFIG_UPDATE_SLOT_TIME;
148 flags |= CONFIG_UPDATE_BEACON_INT;
149
150config:
151 rt2x00dev->ops->lib->config(rt2x00dev, flags, conf);
152
153 /*
154 * Some configuration changes affect the link quality
155 * which means we need to reset the link tuner.
156 */
157 if (flags & (CONFIG_UPDATE_CHANNEL | CONFIG_UPDATE_ANTENNA))
158 rt2x00lib_reset_link_tuner(rt2x00dev);
159
160 rt2x00dev->rx_status.phymode = conf->phymode;
161 rt2x00dev->rx_status.freq = conf->freq;
162 rt2x00dev->rx_status.channel = conf->channel;
163 rt2x00dev->tx_power = conf->power_level;
164 rt2x00dev->rx_status.antenna = conf->antenna_sel_rx;
165}
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
new file mode 100644
index 000000000000..4d2aaecd9dfe
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -0,0 +1,331 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00lib
23 Abstract: rt2x00 debugfs specific routines.
24 */
25
26/*
27 * Set enviroment defines for rt2x00.h
28 */
29#define DRV_NAME "rt2x00lib"
30
31#include <linux/debugfs.h>
32#include <linux/kernel.h>
33#include <linux/module.h>
34#include <linux/uaccess.h>
35
36#include "rt2x00.h"
37#include "rt2x00lib.h"
38
39#define PRINT_LINE_LEN_MAX 32
40
41struct rt2x00debug_intf {
42 /*
43 * Pointer to driver structure where
44 * this debugfs entry belongs to.
45 */
46 struct rt2x00_dev *rt2x00dev;
47
48 /*
49 * Reference to the rt2x00debug structure
50 * which can be used to communicate with
51 * the registers.
52 */
53 const struct rt2x00debug *debug;
54
55 /*
56 * Debugfs entries for:
57 * - driver folder
58 * - driver file
59 * - chipset file
60 * - register offset/value files
61 * - eeprom offset/value files
62 * - bbp offset/value files
63 * - rf offset/value files
64 */
65 struct dentry *driver_folder;
66 struct dentry *driver_entry;
67 struct dentry *chipset_entry;
68 struct dentry *csr_off_entry;
69 struct dentry *csr_val_entry;
70 struct dentry *eeprom_off_entry;
71 struct dentry *eeprom_val_entry;
72 struct dentry *bbp_off_entry;
73 struct dentry *bbp_val_entry;
74 struct dentry *rf_off_entry;
75 struct dentry *rf_val_entry;
76
77 /*
78 * Driver and chipset files will use a data buffer
79 * that has been created in advance. This will simplify
80 * the code since we can use the debugfs functions.
81 */
82 struct debugfs_blob_wrapper driver_blob;
83 struct debugfs_blob_wrapper chipset_blob;
84
85 /*
86 * Requested offset for each register type.
87 */
88 unsigned int offset_csr;
89 unsigned int offset_eeprom;
90 unsigned int offset_bbp;
91 unsigned int offset_rf;
92};
93
94static int rt2x00debug_file_open(struct inode *inode, struct file *file)
95{
96 struct rt2x00debug_intf *intf = inode->i_private;
97
98 file->private_data = inode->i_private;
99
100 if (!try_module_get(intf->debug->owner))
101 return -EBUSY;
102
103 return 0;
104}
105
106static int rt2x00debug_file_release(struct inode *inode, struct file *file)
107{
108 struct rt2x00debug_intf *intf = file->private_data;
109
110 module_put(intf->debug->owner);
111
112 return 0;
113}
114
115#define RT2X00DEBUGFS_OPS_READ(__name, __format, __type) \
116static ssize_t rt2x00debug_read_##__name(struct file *file, \
117 char __user *buf, \
118 size_t length, \
119 loff_t *offset) \
120{ \
121 struct rt2x00debug_intf *intf = file->private_data; \
122 const struct rt2x00debug *debug = intf->debug; \
123 char line[16]; \
124 size_t size; \
125 __type value; \
126 \
127 if (*offset) \
128 return 0; \
129 \
130 if (intf->offset_##__name >= debug->__name.word_count) \
131 return -EINVAL; \
132 \
133 debug->__name.read(intf->rt2x00dev, \
134 intf->offset_##__name, &value); \
135 \
136 size = sprintf(line, __format, value); \
137 \
138 if (copy_to_user(buf, line, size)) \
139 return -EFAULT; \
140 \
141 *offset += size; \
142 return size; \
143}
144
145#define RT2X00DEBUGFS_OPS_WRITE(__name, __type) \
146static ssize_t rt2x00debug_write_##__name(struct file *file, \
147 const char __user *buf,\
148 size_t length, \
149 loff_t *offset) \
150{ \
151 struct rt2x00debug_intf *intf = file->private_data; \
152 const struct rt2x00debug *debug = intf->debug; \
153 char line[16]; \
154 size_t size; \
155 __type value; \
156 \
157 if (*offset) \
158 return 0; \
159 \
160 if (!capable(CAP_NET_ADMIN)) \
161 return -EPERM; \
162 \
163 if (intf->offset_##__name >= debug->__name.word_count) \
164 return -EINVAL; \
165 \
166 if (copy_from_user(line, buf, length)) \
167 return -EFAULT; \
168 \
169 size = strlen(line); \
170 value = simple_strtoul(line, NULL, 0); \
171 \
172 debug->__name.write(intf->rt2x00dev, \
173 intf->offset_##__name, value); \
174 \
175 *offset += size; \
176 return size; \
177}
178
179#define RT2X00DEBUGFS_OPS(__name, __format, __type) \
180RT2X00DEBUGFS_OPS_READ(__name, __format, __type); \
181RT2X00DEBUGFS_OPS_WRITE(__name, __type); \
182 \
183static const struct file_operations rt2x00debug_fop_##__name = {\
184 .owner = THIS_MODULE, \
185 .read = rt2x00debug_read_##__name, \
186 .write = rt2x00debug_write_##__name, \
187 .open = rt2x00debug_file_open, \
188 .release = rt2x00debug_file_release, \
189};
190
191RT2X00DEBUGFS_OPS(csr, "0x%.8x\n", u32);
192RT2X00DEBUGFS_OPS(eeprom, "0x%.4x\n", u16);
193RT2X00DEBUGFS_OPS(bbp, "0x%.2x\n", u8);
194RT2X00DEBUGFS_OPS(rf, "0x%.8x\n", u32);
195
196static struct dentry *rt2x00debug_create_file_driver(const char *name,
197 struct rt2x00debug_intf
198 *intf,
199 struct debugfs_blob_wrapper
200 *blob)
201{
202 char *data;
203
204 data = kzalloc(3 * PRINT_LINE_LEN_MAX, GFP_KERNEL);
205 if (!data)
206 return NULL;
207
208 blob->data = data;
209 data += sprintf(data, "driver: %s\n", intf->rt2x00dev->ops->name);
210 data += sprintf(data, "version: %s\n", DRV_VERSION);
211 data += sprintf(data, "compiled: %s %s\n", __DATE__, __TIME__);
212 blob->size = strlen(blob->data);
213
214 return debugfs_create_blob(name, S_IRUGO, intf->driver_folder, blob);
215}
216
217static struct dentry *rt2x00debug_create_file_chipset(const char *name,
218 struct rt2x00debug_intf
219 *intf,
220 struct
221 debugfs_blob_wrapper
222 *blob)
223{
224 const struct rt2x00debug *debug = intf->debug;
225 char *data;
226
227 data = kzalloc(4 * PRINT_LINE_LEN_MAX, GFP_KERNEL);
228 if (!data)
229 return NULL;
230
231 blob->data = data;
232 data += sprintf(data, "csr length: %d\n", debug->csr.word_count);
233 data += sprintf(data, "eeprom length: %d\n", debug->eeprom.word_count);
234 data += sprintf(data, "bbp length: %d\n", debug->bbp.word_count);
235 data += sprintf(data, "rf length: %d\n", debug->rf.word_count);
236 blob->size = strlen(blob->data);
237
238 return debugfs_create_blob(name, S_IRUGO, intf->driver_folder, blob);
239}
240
241void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
242{
243 const struct rt2x00debug *debug = rt2x00dev->ops->debugfs;
244 struct rt2x00debug_intf *intf;
245
246 intf = kzalloc(sizeof(struct rt2x00debug_intf), GFP_KERNEL);
247 if (!intf) {
248 ERROR(rt2x00dev, "Failed to allocate debug handler.\n");
249 return;
250 }
251
252 intf->debug = debug;
253 intf->rt2x00dev = rt2x00dev;
254 rt2x00dev->debugfs_intf = intf;
255
256 intf->driver_folder =
257 debugfs_create_dir(intf->rt2x00dev->ops->name,
258 rt2x00dev->hw->wiphy->debugfsdir);
259 if (IS_ERR(intf->driver_folder))
260 goto exit;
261
262 intf->driver_entry =
263 rt2x00debug_create_file_driver("driver", intf, &intf->driver_blob);
264 if (IS_ERR(intf->driver_entry))
265 goto exit;
266
267 intf->chipset_entry =
268 rt2x00debug_create_file_chipset("chipset",
269 intf, &intf->chipset_blob);
270 if (IS_ERR(intf->chipset_entry))
271 goto exit;
272
273#define RT2X00DEBUGFS_CREATE_ENTRY(__intf, __name) \
274({ \
275 (__intf)->__name##_off_entry = \
276 debugfs_create_u32(__stringify(__name) "_offset", \
277 S_IRUGO | S_IWUSR, \
278 (__intf)->driver_folder, \
279 &(__intf)->offset_##__name); \
280 if (IS_ERR((__intf)->__name##_off_entry)) \
281 goto exit; \
282 \
283 (__intf)->__name##_val_entry = \
284 debugfs_create_file(__stringify(__name) "_value", \
285 S_IRUGO | S_IWUSR, \
286 (__intf)->driver_folder, \
287 (__intf), &rt2x00debug_fop_##__name);\
288 if (IS_ERR((__intf)->__name##_val_entry)) \
289 goto exit; \
290})
291
292 RT2X00DEBUGFS_CREATE_ENTRY(intf, csr);
293 RT2X00DEBUGFS_CREATE_ENTRY(intf, eeprom);
294 RT2X00DEBUGFS_CREATE_ENTRY(intf, bbp);
295 RT2X00DEBUGFS_CREATE_ENTRY(intf, rf);
296
297#undef RT2X00DEBUGFS_CREATE_ENTRY
298
299 return;
300
301exit:
302 rt2x00debug_deregister(rt2x00dev);
303 ERROR(rt2x00dev, "Failed to register debug handler.\n");
304
305 return;
306}
307
308void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
309{
310 const struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf;
311
312 if (unlikely(!intf))
313 return;
314
315 debugfs_remove(intf->rf_val_entry);
316 debugfs_remove(intf->rf_off_entry);
317 debugfs_remove(intf->bbp_val_entry);
318 debugfs_remove(intf->bbp_off_entry);
319 debugfs_remove(intf->eeprom_val_entry);
320 debugfs_remove(intf->eeprom_off_entry);
321 debugfs_remove(intf->csr_val_entry);
322 debugfs_remove(intf->csr_off_entry);
323 debugfs_remove(intf->chipset_entry);
324 debugfs_remove(intf->driver_entry);
325 debugfs_remove(intf->driver_folder);
326 kfree(intf->chipset_blob.data);
327 kfree(intf->driver_blob.data);
328 kfree(intf);
329
330 rt2x00dev->debugfs_intf = NULL;
331}
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.h b/drivers/net/wireless/rt2x00/rt2x00debug.h
new file mode 100644
index 000000000000..860e8fa3a0da
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.h
@@ -0,0 +1,57 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00debug
23 Abstract: Data structures for the rt2x00debug.
24 */
25
26#ifndef RT2X00DEBUG_H
27#define RT2X00DEBUG_H
28
29struct rt2x00_dev;
30
31#define RT2X00DEBUGFS_REGISTER_ENTRY(__name, __type) \
32struct reg##__name { \
33 void (*read)(const struct rt2x00_dev *rt2x00dev, \
34 const unsigned int word, __type *data); \
35 void (*write)(const struct rt2x00_dev *rt2x00dev, \
36 const unsigned int word, __type data); \
37 \
38 unsigned int word_size; \
39 unsigned int word_count; \
40} __name
41
42struct rt2x00debug {
43 /*
44 * Reference to the modules structure.
45 */
46 struct module *owner;
47
48 /*
49 * Register access entries.
50 */
51 RT2X00DEBUGFS_REGISTER_ENTRY(csr, u32);
52 RT2X00DEBUGFS_REGISTER_ENTRY(eeprom, u16);
53 RT2X00DEBUGFS_REGISTER_ENTRY(bbp, u8);
54 RT2X00DEBUGFS_REGISTER_ENTRY(rf, u32);
55};
56
57#endif /* RT2X00DEBUG_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
new file mode 100644
index 000000000000..cd82eeface8f
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -0,0 +1,1133 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00lib
23 Abstract: rt2x00 generic device routines.
24 */
25
26/*
27 * Set enviroment defines for rt2x00.h
28 */
29#define DRV_NAME "rt2x00lib"
30
31#include <linux/kernel.h>
32#include <linux/module.h>
33
34#include "rt2x00.h"
35#include "rt2x00lib.h"
36
37/*
38 * Ring handler.
39 */
40struct data_ring *rt2x00lib_get_ring(struct rt2x00_dev *rt2x00dev,
41 const unsigned int queue)
42{
43 int beacon = test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
44
45 /*
46 * Check if we are requesting a reqular TX ring,
47 * or if we are requesting a Beacon or Atim ring.
48 * For Atim rings, we should check if it is supported.
49 */
50 if (queue < rt2x00dev->hw->queues && rt2x00dev->tx)
51 return &rt2x00dev->tx[queue];
52
53 if (!rt2x00dev->bcn || !beacon)
54 return NULL;
55
56 if (queue == IEEE80211_TX_QUEUE_BEACON)
57 return &rt2x00dev->bcn[0];
58 else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON)
59 return &rt2x00dev->bcn[1];
60
61 return NULL;
62}
63EXPORT_SYMBOL_GPL(rt2x00lib_get_ring);
64
65/*
66 * Link tuning handlers
67 */
68static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
69{
70 rt2x00_clear_link(&rt2x00dev->link);
71
72 /*
73 * Reset the link tuner.
74 */
75 rt2x00dev->ops->lib->reset_tuner(rt2x00dev);
76
77 queue_delayed_work(rt2x00dev->hw->workqueue,
78 &rt2x00dev->link.work, LINK_TUNE_INTERVAL);
79}
80
81static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev)
82{
83 if (delayed_work_pending(&rt2x00dev->link.work))
84 cancel_rearming_delayed_work(&rt2x00dev->link.work);
85}
86
87void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
88{
89 rt2x00lib_stop_link_tuner(rt2x00dev);
90 rt2x00lib_start_link_tuner(rt2x00dev);
91}
92
93/*
94 * Radio control handlers.
95 */
96int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
97{
98 int status;
99
100 /*
101 * Don't enable the radio twice.
102 * And check if the hardware button has been disabled.
103 */
104 if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
105 (test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags) &&
106 !test_bit(DEVICE_ENABLED_RADIO_HW, &rt2x00dev->flags)))
107 return 0;
108
109 /*
110 * Enable radio.
111 */
112 status = rt2x00dev->ops->lib->set_device_state(rt2x00dev,
113 STATE_RADIO_ON);
114 if (status)
115 return status;
116
117 __set_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags);
118
119 /*
120 * Enable RX.
121 */
122 rt2x00lib_toggle_rx(rt2x00dev, 1);
123
124 /*
125 * Start the TX queues.
126 */
127 ieee80211_start_queues(rt2x00dev->hw);
128
129 return 0;
130}
131
132void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
133{
134 if (!__test_and_clear_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
135 return;
136
137 /*
138 * Stop beacon generation.
139 */
140 if (work_pending(&rt2x00dev->beacon_work))
141 cancel_work_sync(&rt2x00dev->beacon_work);
142
143 /*
144 * Stop the TX queues.
145 */
146 ieee80211_stop_queues(rt2x00dev->hw);
147
148 /*
149 * Disable RX.
150 */
151 rt2x00lib_toggle_rx(rt2x00dev, 0);
152
153 /*
154 * Disable radio.
155 */
156 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF);
157}
158
159void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, int enable)
160{
161 enum dev_state state = enable ? STATE_RADIO_RX_ON : STATE_RADIO_RX_OFF;
162
163 /*
164 * When we are disabling the RX, we should also stop the link tuner.
165 */
166 if (!enable)
167 rt2x00lib_stop_link_tuner(rt2x00dev);
168
169 rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
170
171 /*
172 * When we are enabling the RX, we should also start the link tuner.
173 */
174 if (enable && is_interface_present(&rt2x00dev->interface))
175 rt2x00lib_start_link_tuner(rt2x00dev);
176}
177
178static void rt2x00lib_precalculate_link_signal(struct link *link)
179{
180 if (link->rx_failed || link->rx_success)
181 link->rx_percentage =
182 (link->rx_success * 100) /
183 (link->rx_failed + link->rx_success);
184 else
185 link->rx_percentage = 50;
186
187 if (link->tx_failed || link->tx_success)
188 link->tx_percentage =
189 (link->tx_success * 100) /
190 (link->tx_failed + link->tx_success);
191 else
192 link->tx_percentage = 50;
193
194 link->rx_success = 0;
195 link->rx_failed = 0;
196 link->tx_success = 0;
197 link->tx_failed = 0;
198}
199
200static int rt2x00lib_calculate_link_signal(struct rt2x00_dev *rt2x00dev,
201 int rssi)
202{
203 int rssi_percentage = 0;
204 int signal;
205
206 /*
207 * We need a positive value for the RSSI.
208 */
209 if (rssi < 0)
210 rssi += rt2x00dev->rssi_offset;
211
212 /*
213 * Calculate the different percentages,
214 * which will be used for the signal.
215 */
216 if (rt2x00dev->rssi_offset)
217 rssi_percentage = (rssi * 100) / rt2x00dev->rssi_offset;
218
219 /*
220 * Add the individual percentages and use the WEIGHT
221 * defines to calculate the current link signal.
222 */
223 signal = ((WEIGHT_RSSI * rssi_percentage) +
224 (WEIGHT_TX * rt2x00dev->link.tx_percentage) +
225 (WEIGHT_RX * rt2x00dev->link.rx_percentage)) / 100;
226
227 return (signal > 100) ? 100 : signal;
228}
229
230static void rt2x00lib_link_tuner(struct work_struct *work)
231{
232 struct rt2x00_dev *rt2x00dev =
233 container_of(work, struct rt2x00_dev, link.work.work);
234
235 /*
236 * Update statistics.
237 */
238 rt2x00dev->ops->lib->link_stats(rt2x00dev);
239
240 rt2x00dev->low_level_stats.dot11FCSErrorCount +=
241 rt2x00dev->link.rx_failed;
242
243 rt2x00lib_precalculate_link_signal(&rt2x00dev->link);
244
245 /*
246 * Only perform the link tuning when Link tuning
247 * has been enabled (This could have been disabled from the EEPROM).
248 */
249 if (!test_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags))
250 rt2x00dev->ops->lib->link_tuner(rt2x00dev);
251
252 /*
253 * Increase tuner counter, and reschedule the next link tuner run.
254 */
255 rt2x00dev->link.count++;
256 queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work,
257 LINK_TUNE_INTERVAL);
258}
259
260/*
261 * Interrupt context handlers.
262 */
263static void rt2x00lib_beacondone_scheduled(struct work_struct *work)
264{
265 struct rt2x00_dev *rt2x00dev =
266 container_of(work, struct rt2x00_dev, beacon_work);
267 struct data_ring *ring =
268 rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
269 struct data_entry *entry = rt2x00_get_data_entry(ring);
270 struct sk_buff *skb;
271
272 skb = ieee80211_beacon_get(rt2x00dev->hw,
273 rt2x00dev->interface.id,
274 &entry->tx_status.control);
275 if (!skb)
276 return;
277
278 rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, skb,
279 &entry->tx_status.control);
280
281 dev_kfree_skb(skb);
282}
283
284void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
285{
286 if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
287 return;
288
289 queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->beacon_work);
290}
291EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
292
293void rt2x00lib_txdone(struct data_entry *entry,
294 const int status, const int retry)
295{
296 struct rt2x00_dev *rt2x00dev = entry->ring->rt2x00dev;
297 struct ieee80211_tx_status *tx_status = &entry->tx_status;
298 struct ieee80211_low_level_stats *stats = &rt2x00dev->low_level_stats;
299 int success = !!(status == TX_SUCCESS || status == TX_SUCCESS_RETRY);
300 int fail = !!(status == TX_FAIL_RETRY || status == TX_FAIL_INVALID ||
301 status == TX_FAIL_OTHER);
302
303 /*
304 * Update TX statistics.
305 */
306 tx_status->flags = 0;
307 tx_status->ack_signal = 0;
308 tx_status->excessive_retries = (status == TX_FAIL_RETRY);
309 tx_status->retry_count = retry;
310 rt2x00dev->link.tx_success += success;
311 rt2x00dev->link.tx_failed += retry + fail;
312
313 if (!(tx_status->control.flags & IEEE80211_TXCTL_NO_ACK)) {
314 if (success)
315 tx_status->flags |= IEEE80211_TX_STATUS_ACK;
316 else
317 stats->dot11ACKFailureCount++;
318 }
319
320 tx_status->queue_length = entry->ring->stats.limit;
321 tx_status->queue_number = tx_status->control.queue;
322
323 if (tx_status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) {
324 if (success)
325 stats->dot11RTSSuccessCount++;
326 else
327 stats->dot11RTSFailureCount++;
328 }
329
330 /*
331 * Send the tx_status to mac80211,
332 * that method also cleans up the skb structure.
333 */
334 ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb, tx_status);
335 entry->skb = NULL;
336}
337EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
338
339void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb,
340 const int signal, const int rssi, const int ofdm)
341{
342 struct rt2x00_dev *rt2x00dev = entry->ring->rt2x00dev;
343 struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
344 struct ieee80211_hw_mode *mode;
345 struct ieee80211_rate *rate;
346 unsigned int i;
347 int val = 0;
348
349 /*
350 * Update RX statistics.
351 */
352 mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
353 for (i = 0; i < mode->num_rates; i++) {
354 rate = &mode->rates[i];
355
356 /*
357 * When frame was received with an OFDM bitrate,
358 * the signal is the PLCP value. If it was received with
359 * a CCK bitrate the signal is the rate in 0.5kbit/s.
360 */
361 if (!ofdm)
362 val = DEVICE_GET_RATE_FIELD(rate->val, RATE);
363 else
364 val = DEVICE_GET_RATE_FIELD(rate->val, PLCP);
365
366 if (val == signal) {
367 val = rate->val;
368 break;
369 }
370 }
371
372 rt2x00_update_link_rssi(&rt2x00dev->link, rssi);
373 rt2x00dev->link.rx_success++;
374 rx_status->rate = val;
375 rx_status->signal = rt2x00lib_calculate_link_signal(rt2x00dev, rssi);
376 rx_status->ssi = rssi;
377
378 /*
379 * Send frame to mac80211
380 */
381 ieee80211_rx_irqsafe(rt2x00dev->hw, skb, rx_status);
382}
383EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
384
385/*
386 * TX descriptor initializer
387 */
388void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev,
389 struct data_desc *txd,
390 struct ieee80211_hdr *ieee80211hdr,
391 unsigned int length,
392 struct ieee80211_tx_control *control)
393{
394 struct data_entry_desc desc;
395 struct data_ring *ring;
396 int tx_rate;
397 int bitrate;
398 int duration;
399 int residual;
400 u16 frame_control;
401 u16 seq_ctrl;
402
403 /*
404 * Make sure the descriptor is properly cleared.
405 */
406 memset(&desc, 0x00, sizeof(desc));
407
408 /*
409 * Get ring pointer, if we fail to obtain the
410 * correct ring, then use the first TX ring.
411 */
412 ring = rt2x00lib_get_ring(rt2x00dev, control->queue);
413 if (!ring)
414 ring = rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
415
416 desc.cw_min = ring->tx_params.cw_min;
417 desc.cw_max = ring->tx_params.cw_max;
418 desc.aifs = ring->tx_params.aifs;
419
420 /*
421 * Identify queue
422 */
423 if (control->queue < rt2x00dev->hw->queues)
424 desc.queue = control->queue;
425 else if (control->queue == IEEE80211_TX_QUEUE_BEACON ||
426 control->queue == IEEE80211_TX_QUEUE_AFTER_BEACON)
427 desc.queue = QUEUE_MGMT;
428 else
429 desc.queue = QUEUE_OTHER;
430
431 /*
432 * Read required fields from ieee80211 header.
433 */
434 frame_control = le16_to_cpu(ieee80211hdr->frame_control);
435 seq_ctrl = le16_to_cpu(ieee80211hdr->seq_ctrl);
436
437 tx_rate = control->tx_rate;
438
439 /*
440 * Check if this is a RTS/CTS frame
441 */
442 if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) {
443 __set_bit(ENTRY_TXD_BURST, &desc.flags);
444 if (is_rts_frame(frame_control))
445 __set_bit(ENTRY_TXD_RTS_FRAME, &desc.flags);
446 if (control->rts_cts_rate)
447 tx_rate = control->rts_cts_rate;
448 }
449
450 /*
451 * Check for OFDM
452 */
453 if (DEVICE_GET_RATE_FIELD(tx_rate, RATEMASK) & DEV_OFDM_RATEMASK)
454 __set_bit(ENTRY_TXD_OFDM_RATE, &desc.flags);
455
456 /*
457 * Check if more fragments are pending
458 */
459 if (ieee80211_get_morefrag(ieee80211hdr)) {
460 __set_bit(ENTRY_TXD_BURST, &desc.flags);
461 __set_bit(ENTRY_TXD_MORE_FRAG, &desc.flags);
462 }
463
464 /*
465 * Beacons and probe responses require the tsf timestamp
466 * to be inserted into the frame.
467 */
468 if (control->queue == IEEE80211_TX_QUEUE_BEACON ||
469 is_probe_resp(frame_control))
470 __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc.flags);
471
472 /*
473 * Determine with what IFS priority this frame should be send.
474 * Set ifs to IFS_SIFS when the this is not the first fragment,
475 * or this fragment came after RTS/CTS.
476 */
477 if ((seq_ctrl & IEEE80211_SCTL_FRAG) > 0 ||
478 test_bit(ENTRY_TXD_RTS_FRAME, &desc.flags))
479 desc.ifs = IFS_SIFS;
480 else
481 desc.ifs = IFS_BACKOFF;
482
483 /*
484 * PLCP setup
485 * Length calculation depends on OFDM/CCK rate.
486 */
487 desc.signal = DEVICE_GET_RATE_FIELD(tx_rate, PLCP);
488 desc.service = 0x04;
489
490 if (test_bit(ENTRY_TXD_OFDM_RATE, &desc.flags)) {
491 desc.length_high = ((length + FCS_LEN) >> 6) & 0x3f;
492 desc.length_low = ((length + FCS_LEN) & 0x3f);
493 } else {
494 bitrate = DEVICE_GET_RATE_FIELD(tx_rate, RATE);
495
496 /*
497 * Convert length to microseconds.
498 */
499 residual = get_duration_res(length + FCS_LEN, bitrate);
500 duration = get_duration(length + FCS_LEN, bitrate);
501
502 if (residual != 0) {
503 duration++;
504
505 /*
506 * Check if we need to set the Length Extension
507 */
508 if (bitrate == 110 && residual <= 3)
509 desc.service |= 0x80;
510 }
511
512 desc.length_high = (duration >> 8) & 0xff;
513 desc.length_low = duration & 0xff;
514
515 /*
516 * When preamble is enabled we should set the
517 * preamble bit for the signal.
518 */
519 if (DEVICE_GET_RATE_FIELD(tx_rate, PREAMBLE))
520 desc.signal |= 0x08;
521 }
522
523 rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, txd, &desc,
524 ieee80211hdr, length, control);
525}
526EXPORT_SYMBOL_GPL(rt2x00lib_write_tx_desc);
527
528/*
529 * Driver initialization handlers.
530 */
531static void rt2x00lib_channel(struct ieee80211_channel *entry,
532 const int channel, const int tx_power,
533 const int value)
534{
535 entry->chan = channel;
536 if (channel <= 14)
537 entry->freq = 2407 + (5 * channel);
538 else
539 entry->freq = 5000 + (5 * channel);
540 entry->val = value;
541 entry->flag =
542 IEEE80211_CHAN_W_IBSS |
543 IEEE80211_CHAN_W_ACTIVE_SCAN |
544 IEEE80211_CHAN_W_SCAN;
545 entry->power_level = tx_power;
546 entry->antenna_max = 0xff;
547}
548
549static void rt2x00lib_rate(struct ieee80211_rate *entry,
550 const int rate, const int mask,
551 const int plcp, const int flags)
552{
553 entry->rate = rate;
554 entry->val =
555 DEVICE_SET_RATE_FIELD(rate, RATE) |
556 DEVICE_SET_RATE_FIELD(mask, RATEMASK) |
557 DEVICE_SET_RATE_FIELD(plcp, PLCP);
558 entry->flags = flags;
559 entry->val2 = entry->val;
560 if (entry->flags & IEEE80211_RATE_PREAMBLE2)
561 entry->val2 |= DEVICE_SET_RATE_FIELD(1, PREAMBLE);
562 entry->min_rssi_ack = 0;
563 entry->min_rssi_ack_delta = 0;
564}
565
566static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
567 struct hw_mode_spec *spec)
568{
569 struct ieee80211_hw *hw = rt2x00dev->hw;
570 struct ieee80211_hw_mode *hwmodes;
571 struct ieee80211_channel *channels;
572 struct ieee80211_rate *rates;
573 unsigned int i;
574 unsigned char tx_power;
575
576 hwmodes = kzalloc(sizeof(*hwmodes) * spec->num_modes, GFP_KERNEL);
577 if (!hwmodes)
578 goto exit;
579
580 channels = kzalloc(sizeof(*channels) * spec->num_channels, GFP_KERNEL);
581 if (!channels)
582 goto exit_free_modes;
583
584 rates = kzalloc(sizeof(*rates) * spec->num_rates, GFP_KERNEL);
585 if (!rates)
586 goto exit_free_channels;
587
588 /*
589 * Initialize Rate list.
590 */
591 rt2x00lib_rate(&rates[0], 10, DEV_RATEMASK_1MB,
592 0x00, IEEE80211_RATE_CCK);
593 rt2x00lib_rate(&rates[1], 20, DEV_RATEMASK_2MB,
594 0x01, IEEE80211_RATE_CCK_2);
595 rt2x00lib_rate(&rates[2], 55, DEV_RATEMASK_5_5MB,
596 0x02, IEEE80211_RATE_CCK_2);
597 rt2x00lib_rate(&rates[3], 110, DEV_RATEMASK_11MB,
598 0x03, IEEE80211_RATE_CCK_2);
599
600 if (spec->num_rates > 4) {
601 rt2x00lib_rate(&rates[4], 60, DEV_RATEMASK_6MB,
602 0x0b, IEEE80211_RATE_OFDM);
603 rt2x00lib_rate(&rates[5], 90, DEV_RATEMASK_9MB,
604 0x0f, IEEE80211_RATE_OFDM);
605 rt2x00lib_rate(&rates[6], 120, DEV_RATEMASK_12MB,
606 0x0a, IEEE80211_RATE_OFDM);
607 rt2x00lib_rate(&rates[7], 180, DEV_RATEMASK_18MB,
608 0x0e, IEEE80211_RATE_OFDM);
609 rt2x00lib_rate(&rates[8], 240, DEV_RATEMASK_24MB,
610 0x09, IEEE80211_RATE_OFDM);
611 rt2x00lib_rate(&rates[9], 360, DEV_RATEMASK_36MB,
612 0x0d, IEEE80211_RATE_OFDM);
613 rt2x00lib_rate(&rates[10], 480, DEV_RATEMASK_48MB,
614 0x08, IEEE80211_RATE_OFDM);
615 rt2x00lib_rate(&rates[11], 540, DEV_RATEMASK_54MB,
616 0x0c, IEEE80211_RATE_OFDM);
617 }
618
619 /*
620 * Initialize Channel list.
621 */
622 for (i = 0; i < spec->num_channels; i++) {
623 if (spec->channels[i].channel <= 14)
624 tx_power = spec->tx_power_bg[i];
625 else if (spec->tx_power_a)
626 tx_power = spec->tx_power_a[i];
627 else
628 tx_power = spec->tx_power_default;
629
630 rt2x00lib_channel(&channels[i],
631 spec->channels[i].channel, tx_power, i);
632 }
633
634 /*
635 * Intitialize 802.11b
636 * Rates: CCK.
637 * Channels: OFDM.
638 */
639 if (spec->num_modes > HWMODE_B) {
640 hwmodes[HWMODE_B].mode = MODE_IEEE80211B;
641 hwmodes[HWMODE_B].num_channels = 14;
642 hwmodes[HWMODE_B].num_rates = 4;
643 hwmodes[HWMODE_B].channels = channels;
644 hwmodes[HWMODE_B].rates = rates;
645 }
646
647 /*
648 * Intitialize 802.11g
649 * Rates: CCK, OFDM.
650 * Channels: OFDM.
651 */
652 if (spec->num_modes > HWMODE_G) {
653 hwmodes[HWMODE_G].mode = MODE_IEEE80211G;
654 hwmodes[HWMODE_G].num_channels = 14;
655 hwmodes[HWMODE_G].num_rates = spec->num_rates;
656 hwmodes[HWMODE_G].channels = channels;
657 hwmodes[HWMODE_G].rates = rates;
658 }
659
660 /*
661 * Intitialize 802.11a
662 * Rates: OFDM.
663 * Channels: OFDM, UNII, HiperLAN2.
664 */
665 if (spec->num_modes > HWMODE_A) {
666 hwmodes[HWMODE_A].mode = MODE_IEEE80211A;
667 hwmodes[HWMODE_A].num_channels = spec->num_channels - 14;
668 hwmodes[HWMODE_A].num_rates = spec->num_rates - 4;
669 hwmodes[HWMODE_A].channels = &channels[14];
670 hwmodes[HWMODE_A].rates = &rates[4];
671 }
672
673 if (spec->num_modes > HWMODE_G &&
674 ieee80211_register_hwmode(hw, &hwmodes[HWMODE_G]))
675 goto exit_free_rates;
676
677 if (spec->num_modes > HWMODE_B &&
678 ieee80211_register_hwmode(hw, &hwmodes[HWMODE_B]))
679 goto exit_free_rates;
680
681 if (spec->num_modes > HWMODE_A &&
682 ieee80211_register_hwmode(hw, &hwmodes[HWMODE_A]))
683 goto exit_free_rates;
684
685 rt2x00dev->hwmodes = hwmodes;
686
687 return 0;
688
689exit_free_rates:
690 kfree(rates);
691
692exit_free_channels:
693 kfree(channels);
694
695exit_free_modes:
696 kfree(hwmodes);
697
698exit:
699 ERROR(rt2x00dev, "Allocation ieee80211 modes failed.\n");
700 return -ENOMEM;
701}
702
703static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
704{
705 if (test_bit(DEVICE_INITIALIZED_HW, &rt2x00dev->flags))
706 ieee80211_unregister_hw(rt2x00dev->hw);
707
708 if (likely(rt2x00dev->hwmodes)) {
709 kfree(rt2x00dev->hwmodes->channels);
710 kfree(rt2x00dev->hwmodes->rates);
711 kfree(rt2x00dev->hwmodes);
712 rt2x00dev->hwmodes = NULL;
713 }
714}
715
716static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
717{
718 struct hw_mode_spec *spec = &rt2x00dev->spec;
719 int status;
720
721 /*
722 * Initialize HW modes.
723 */
724 status = rt2x00lib_probe_hw_modes(rt2x00dev, spec);
725 if (status)
726 return status;
727
728 /*
729 * Register HW.
730 */
731 status = ieee80211_register_hw(rt2x00dev->hw);
732 if (status) {
733 rt2x00lib_remove_hw(rt2x00dev);
734 return status;
735 }
736
737 __set_bit(DEVICE_INITIALIZED_HW, &rt2x00dev->flags);
738
739 return 0;
740}
741
742/*
743 * Initialization/uninitialization handlers.
744 */
745static int rt2x00lib_alloc_entries(struct data_ring *ring,
746 const u16 max_entries, const u16 data_size,
747 const u16 desc_size)
748{
749 struct data_entry *entry;
750 unsigned int i;
751
752 ring->stats.limit = max_entries;
753 ring->data_size = data_size;
754 ring->desc_size = desc_size;
755
756 /*
757 * Allocate all ring entries.
758 */
759 entry = kzalloc(ring->stats.limit * sizeof(*entry), GFP_KERNEL);
760 if (!entry)
761 return -ENOMEM;
762
763 for (i = 0; i < ring->stats.limit; i++) {
764 entry[i].flags = 0;
765 entry[i].ring = ring;
766 entry[i].skb = NULL;
767 }
768
769 ring->entry = entry;
770
771 return 0;
772}
773
774static int rt2x00lib_alloc_ring_entries(struct rt2x00_dev *rt2x00dev)
775{
776 struct data_ring *ring;
777
778 /*
779 * Allocate the RX ring.
780 */
781 if (rt2x00lib_alloc_entries(rt2x00dev->rx, RX_ENTRIES, DATA_FRAME_SIZE,
782 rt2x00dev->ops->rxd_size))
783 return -ENOMEM;
784
785 /*
786 * First allocate the TX rings.
787 */
788 txring_for_each(rt2x00dev, ring) {
789 if (rt2x00lib_alloc_entries(ring, TX_ENTRIES, DATA_FRAME_SIZE,
790 rt2x00dev->ops->txd_size))
791 return -ENOMEM;
792 }
793
794 if (!test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags))
795 return 0;
796
797 /*
798 * Allocate the BEACON ring.
799 */
800 if (rt2x00lib_alloc_entries(&rt2x00dev->bcn[0], BEACON_ENTRIES,
801 MGMT_FRAME_SIZE, rt2x00dev->ops->txd_size))
802 return -ENOMEM;
803
804 /*
805 * Allocate the Atim ring.
806 */
807 if (rt2x00lib_alloc_entries(&rt2x00dev->bcn[1], ATIM_ENTRIES,
808 DATA_FRAME_SIZE, rt2x00dev->ops->txd_size))
809 return -ENOMEM;
810
811 return 0;
812}
813
814static void rt2x00lib_free_ring_entries(struct rt2x00_dev *rt2x00dev)
815{
816 struct data_ring *ring;
817
818 ring_for_each(rt2x00dev, ring) {
819 kfree(ring->entry);
820 ring->entry = NULL;
821 }
822}
823
824void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
825{
826 if (!__test_and_clear_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
827 return;
828
829 /*
830 * Unregister rfkill.
831 */
832 rt2x00rfkill_unregister(rt2x00dev);
833
834 /*
835 * Allow the HW to uninitialize.
836 */
837 rt2x00dev->ops->lib->uninitialize(rt2x00dev);
838
839 /*
840 * Free allocated ring entries.
841 */
842 rt2x00lib_free_ring_entries(rt2x00dev);
843}
844
845int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
846{
847 int status;
848
849 if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
850 return 0;
851
852 /*
853 * Allocate all ring entries.
854 */
855 status = rt2x00lib_alloc_ring_entries(rt2x00dev);
856 if (status) {
857 ERROR(rt2x00dev, "Ring entries allocation failed.\n");
858 return status;
859 }
860
861 /*
862 * Initialize the device.
863 */
864 status = rt2x00dev->ops->lib->initialize(rt2x00dev);
865 if (status)
866 goto exit;
867
868 __set_bit(DEVICE_INITIALIZED, &rt2x00dev->flags);
869
870 /*
871 * Register the rfkill handler.
872 */
873 status = rt2x00rfkill_register(rt2x00dev);
874 if (status)
875 goto exit_unitialize;
876
877 return 0;
878
879exit_unitialize:
880 rt2x00lib_uninitialize(rt2x00dev);
881
882exit:
883 rt2x00lib_free_ring_entries(rt2x00dev);
884
885 return status;
886}
887
888/*
889 * driver allocation handlers.
890 */
891static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev)
892{
893 struct data_ring *ring;
894
895 /*
896 * We need the following rings:
897 * RX: 1
898 * TX: hw->queues
899 * Beacon: 1 (if required)
900 * Atim: 1 (if required)
901 */
902 rt2x00dev->data_rings = 1 + rt2x00dev->hw->queues +
903 (2 * test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags));
904
905 ring = kzalloc(rt2x00dev->data_rings * sizeof(*ring), GFP_KERNEL);
906 if (!ring) {
907 ERROR(rt2x00dev, "Ring allocation failed.\n");
908 return -ENOMEM;
909 }
910
911 /*
912 * Initialize pointers
913 */
914 rt2x00dev->rx = ring;
915 rt2x00dev->tx = &rt2x00dev->rx[1];
916 if (test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags))
917 rt2x00dev->bcn = &rt2x00dev->tx[rt2x00dev->hw->queues];
918
919 /*
920 * Initialize ring parameters.
921 * cw_min: 2^5 = 32.
922 * cw_max: 2^10 = 1024.
923 */
924 ring_for_each(rt2x00dev, ring) {
925 ring->rt2x00dev = rt2x00dev;
926 ring->tx_params.aifs = 2;
927 ring->tx_params.cw_min = 5;
928 ring->tx_params.cw_max = 10;
929 }
930
931 return 0;
932}
933
934static void rt2x00lib_free_rings(struct rt2x00_dev *rt2x00dev)
935{
936 kfree(rt2x00dev->rx);
937 rt2x00dev->rx = NULL;
938 rt2x00dev->tx = NULL;
939 rt2x00dev->bcn = NULL;
940}
941
942int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
943{
944 int retval = -ENOMEM;
945
946 /*
947 * Let the driver probe the device to detect the capabilities.
948 */
949 retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
950 if (retval) {
951 ERROR(rt2x00dev, "Failed to allocate device.\n");
952 goto exit;
953 }
954
955 /*
956 * Initialize configuration work.
957 */
958 INIT_WORK(&rt2x00dev->beacon_work, rt2x00lib_beacondone_scheduled);
959 INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner);
960
961 /*
962 * Reset current working type.
963 */
964 rt2x00dev->interface.type = INVALID_INTERFACE;
965
966 /*
967 * Allocate ring array.
968 */
969 retval = rt2x00lib_alloc_rings(rt2x00dev);
970 if (retval)
971 goto exit;
972
973 /*
974 * Initialize ieee80211 structure.
975 */
976 retval = rt2x00lib_probe_hw(rt2x00dev);
977 if (retval) {
978 ERROR(rt2x00dev, "Failed to initialize hw.\n");
979 goto exit;
980 }
981
982 /*
983 * Allocatie rfkill.
984 */
985 retval = rt2x00rfkill_allocate(rt2x00dev);
986 if (retval)
987 goto exit;
988
989 /*
990 * Open the debugfs entry.
991 */
992 rt2x00debug_register(rt2x00dev);
993
994 return 0;
995
996exit:
997 rt2x00lib_remove_dev(rt2x00dev);
998
999 return retval;
1000}
1001EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
1002
1003void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
1004{
1005 /*
1006 * Disable radio.
1007 */
1008 rt2x00lib_disable_radio(rt2x00dev);
1009
1010 /*
1011 * Uninitialize device.
1012 */
1013 rt2x00lib_uninitialize(rt2x00dev);
1014
1015 /*
1016 * Close debugfs entry.
1017 */
1018 rt2x00debug_deregister(rt2x00dev);
1019
1020 /*
1021 * Free rfkill
1022 */
1023 rt2x00rfkill_free(rt2x00dev);
1024
1025 /*
1026 * Free ieee80211_hw memory.
1027 */
1028 rt2x00lib_remove_hw(rt2x00dev);
1029
1030 /*
1031 * Free firmware image.
1032 */
1033 rt2x00lib_free_firmware(rt2x00dev);
1034
1035 /*
1036 * Free ring structures.
1037 */
1038 rt2x00lib_free_rings(rt2x00dev);
1039}
1040EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
1041
1042/*
1043 * Device state handlers
1044 */
1045#ifdef CONFIG_PM
1046int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
1047{
1048 int retval;
1049
1050 NOTICE(rt2x00dev, "Going to sleep.\n");
1051
1052 /*
1053 * Disable radio and unitialize all items
1054 * that must be recreated on resume.
1055 */
1056 rt2x00lib_disable_radio(rt2x00dev);
1057 rt2x00lib_uninitialize(rt2x00dev);
1058 rt2x00debug_deregister(rt2x00dev);
1059
1060 /*
1061 * Set device mode to sleep for power management.
1062 */
1063 retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP);
1064 if (retval)
1065 return retval;
1066
1067 return 0;
1068}
1069EXPORT_SYMBOL_GPL(rt2x00lib_suspend);
1070
1071int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
1072{
1073 struct interface *intf = &rt2x00dev->interface;
1074 int retval;
1075
1076 NOTICE(rt2x00dev, "Waking up.\n");
1077 __set_bit(INTERFACE_RESUME, &rt2x00dev->flags);
1078
1079 /*
1080 * Open the debugfs entry.
1081 */
1082 rt2x00debug_register(rt2x00dev);
1083
1084 /*
1085 * Reinitialize device and all active interfaces.
1086 */
1087 retval = rt2x00mac_start(rt2x00dev->hw);
1088 if (retval)
1089 goto exit;
1090
1091 /*
1092 * Reconfigure device.
1093 */
1094 retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf);
1095 if (retval)
1096 goto exit;
1097
1098 rt2x00lib_config_mac_addr(rt2x00dev, intf->mac);
1099 rt2x00lib_config_bssid(rt2x00dev, intf->bssid);
1100 rt2x00lib_config_type(rt2x00dev, intf->type);
1101 rt2x00lib_config_packet_filter(rt2x00dev, intf->filter);
1102
1103 /*
1104 * When in Master or Ad-hoc mode,
1105 * restart Beacon transmitting by faking a beacondone event.
1106 */
1107 if (intf->type == IEEE80211_IF_TYPE_AP ||
1108 intf->type == IEEE80211_IF_TYPE_IBSS)
1109 rt2x00lib_beacondone(rt2x00dev);
1110
1111 __clear_bit(INTERFACE_RESUME, &rt2x00dev->flags);
1112
1113 return 0;
1114
1115exit:
1116 rt2x00lib_disable_radio(rt2x00dev);
1117 rt2x00lib_uninitialize(rt2x00dev);
1118 rt2x00debug_deregister(rt2x00dev);
1119
1120 __clear_bit(INTERFACE_RESUME, &rt2x00dev->flags);
1121
1122 return retval;
1123}
1124EXPORT_SYMBOL_GPL(rt2x00lib_resume);
1125#endif /* CONFIG_PM */
1126
1127/*
1128 * rt2x00lib module information.
1129 */
1130MODULE_AUTHOR(DRV_PROJECT);
1131MODULE_VERSION(DRV_VERSION);
1132MODULE_DESCRIPTION("rt2x00 library");
1133MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c
new file mode 100644
index 000000000000..236025f8b90f
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c
@@ -0,0 +1,124 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00lib
23 Abstract: rt2x00 firmware loading routines.
24 */
25
26/*
27 * Set enviroment defines for rt2x00.h
28 */
29#define DRV_NAME "rt2x00lib"
30
31#include <linux/crc-itu-t.h>
32#include <linux/kernel.h>
33#include <linux/module.h>
34
35#include "rt2x00.h"
36#include "rt2x00lib.h"
37
38static int rt2x00lib_request_firmware(struct rt2x00_dev *rt2x00dev)
39{
40 struct device *device = wiphy_dev(rt2x00dev->hw->wiphy);
41 const struct firmware *fw;
42 char *fw_name;
43 int retval;
44 u16 crc;
45 u16 tmp;
46
47 /*
48 * Read correct firmware from harddisk.
49 */
50 fw_name = rt2x00dev->ops->lib->get_firmware_name(rt2x00dev);
51 if (!fw_name) {
52 ERROR(rt2x00dev,
53 "Invalid firmware filename.\n"
54 "Please file bug report to %s.\n", DRV_PROJECT);
55 return -EINVAL;
56 }
57
58 INFO(rt2x00dev, "Loading firmware file '%s'.\n", fw_name);
59
60 retval = request_firmware(&fw, fw_name, device);
61 if (retval) {
62 ERROR(rt2x00dev, "Failed to request Firmware.\n");
63 return retval;
64 }
65
66 if (!fw || !fw->size || !fw->data) {
67 ERROR(rt2x00dev, "Failed to read Firmware.\n");
68 return -ENOENT;
69 }
70
71 /*
72 * Validate the firmware using 16 bit CRC.
73 * The last 2 bytes of the firmware are the CRC
74 * so substract those 2 bytes from the CRC checksum,
75 * and set those 2 bytes to 0 when calculating CRC.
76 */
77 tmp = 0;
78 crc = crc_itu_t(0, fw->data, fw->size - 2);
79 crc = crc_itu_t(crc, (u8 *)&tmp, 2);
80
81 if (crc != (fw->data[fw->size - 2] << 8 | fw->data[fw->size - 1])) {
82 ERROR(rt2x00dev, "Firmware CRC error.\n");
83 retval = -ENOENT;
84 goto exit;
85 }
86
87 INFO(rt2x00dev, "Firmware detected - version: %d.%d.\n",
88 fw->data[fw->size - 4], fw->data[fw->size - 3]);
89
90 rt2x00dev->fw = fw;
91
92 return 0;
93
94exit:
95 release_firmware(fw);
96
97 return retval;
98}
99
100int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev)
101{
102 int retval;
103
104 if (!rt2x00dev->fw) {
105 retval = rt2x00lib_request_firmware(rt2x00dev);
106 if (retval)
107 return retval;
108 }
109
110 /*
111 * Send firmware to the device.
112 */
113 retval = rt2x00dev->ops->lib->load_firmware(rt2x00dev,
114 rt2x00dev->fw->data,
115 rt2x00dev->fw->size);
116 return retval;
117}
118
119void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev)
120{
121 release_firmware(rt2x00dev->fw);
122 rt2x00dev->fw = NULL;
123}
124
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
new file mode 100644
index 000000000000..3324090a96a7
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -0,0 +1,125 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00lib
23 Abstract: Data structures and definitions for the rt2x00lib module.
24 */
25
26#ifndef RT2X00LIB_H
27#define RT2X00LIB_H
28
29/*
30 * Interval defines
31 */
32#define LINK_TUNE_INTERVAL ( round_jiffies(HZ) )
33#define RFKILL_POLL_INTERVAL ( HZ / 4 )
34
35/*
36 * Radio control handlers.
37 */
38int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev);
39void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev);
40void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, int enable);
41void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev);
42
43/*
44 * Initialization handlers.
45 */
46int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev);
47void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev);
48
49/*
50 * Configuration handlers.
51 */
52void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac);
53void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid);
54void rt2x00lib_config_packet_filter(struct rt2x00_dev *rt2x00dev, int filter);
55void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, int type);
56void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf);
57
58/*
59 * Firmware handlers.
60 */
61#ifdef CONFIG_RT2X00_LIB_FIRMWARE
62int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev);
63void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev);
64#else
65static inline int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev)
66{
67 return 0;
68}
69static inline void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev)
70{
71}
72#endif /* CONFIG_RT2X00_LIB_FIRMWARE */
73
74/*
75 * Debugfs handlers.
76 */
77#ifdef CONFIG_RT2X00_LIB_DEBUGFS
78void rt2x00debug_register(struct rt2x00_dev *rt2x00dev);
79void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev);
80#else
81static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
82{
83}
84
85static inline void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
86{
87}
88#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
89
90/*
91 * RFkill handlers.
92 */
93#ifdef CONFIG_RT2X00_LIB_RFKILL
94int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev);
95void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev);
96int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev);
97void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev);
98#else
99static inline int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
100{
101 /*
102 * Force enable this flag, this will assure that
103 * devices with a hardware button but without rfkill support
104 * can still use their hardware.
105 */
106 __set_bit(DEVICE_ENABLED_RADIO_HW, &rt2x00dev->flags);
107
108 return 0;
109}
110
111static inline void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
112{
113}
114
115static inline int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
116{
117 return 0;
118}
119
120static inline void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
121{
122}
123#endif /* CONFIG_RT2X00_LIB_RFKILL */
124
125#endif /* RT2X00LIB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
new file mode 100644
index 000000000000..778ed41e21ef
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -0,0 +1,459 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00mac
23 Abstract: rt2x00 generic mac80211 routines.
24 */
25
26/*
27 * Set enviroment defines for rt2x00.h
28 */
29#define DRV_NAME "rt2x00lib"
30
31#include <linux/kernel.h>
32#include <linux/module.h>
33
34#include "rt2x00.h"
35#include "rt2x00lib.h"
36
37static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
38 struct data_ring *ring,
39 struct sk_buff *frag_skb,
40 struct ieee80211_tx_control *control)
41{
42 struct sk_buff *skb;
43 int size;
44
45 if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
46 size = sizeof(struct ieee80211_cts);
47 else
48 size = sizeof(struct ieee80211_rts);
49
50 skb = dev_alloc_skb(size + rt2x00dev->hw->extra_tx_headroom);
51 if (!skb) {
52 WARNING(rt2x00dev, "Failed to create RTS/CTS frame.\n");
53 return NETDEV_TX_BUSY;
54 }
55
56 skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom);
57 skb_put(skb, size);
58
59 if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
60 ieee80211_ctstoself_get(rt2x00dev->hw, rt2x00dev->interface.id,
61 frag_skb->data, frag_skb->len, control,
62 (struct ieee80211_cts *)(skb->data));
63 else
64 ieee80211_rts_get(rt2x00dev->hw, rt2x00dev->interface.id,
65 frag_skb->data, frag_skb->len, control,
66 (struct ieee80211_rts *)(skb->data));
67
68 if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control)) {
69 WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
70 return NETDEV_TX_BUSY;
71 }
72
73 return NETDEV_TX_OK;
74}
75
76int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
77 struct ieee80211_tx_control *control)
78{
79 struct rt2x00_dev *rt2x00dev = hw->priv;
80 struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
81 struct data_ring *ring;
82 u16 frame_control;
83
84 /*
85 * Determine which ring to put packet on.
86 */
87 ring = rt2x00lib_get_ring(rt2x00dev, control->queue);
88 if (unlikely(!ring)) {
89 ERROR(rt2x00dev,
90 "Attempt to send packet over invalid queue %d.\n"
91 "Please file bug report to %s.\n",
92 control->queue, DRV_PROJECT);
93 dev_kfree_skb_any(skb);
94 return NETDEV_TX_OK;
95 }
96
97 /*
98 * If CTS/RTS is required. and this frame is not CTS or RTS,
99 * create and queue that frame first. But make sure we have
100 * at least enough entries available to send this CTS/RTS
101 * frame as well as the data frame.
102 */
103 frame_control = le16_to_cpu(ieee80211hdr->frame_control);
104 if (!is_rts_frame(frame_control) && !is_cts_frame(frame_control) &&
105 (control->flags & (IEEE80211_TXCTL_USE_RTS_CTS |
106 IEEE80211_TXCTL_USE_CTS_PROTECT))) {
107 if (rt2x00_ring_free(ring) <= 1)
108 return NETDEV_TX_BUSY;
109
110 if (rt2x00mac_tx_rts_cts(rt2x00dev, ring, skb, control))
111 return NETDEV_TX_BUSY;
112 }
113
114 if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control))
115 return NETDEV_TX_BUSY;
116
117 if (rt2x00dev->ops->lib->kick_tx_queue)
118 rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue);
119
120 return NETDEV_TX_OK;
121}
122EXPORT_SYMBOL_GPL(rt2x00mac_tx);
123
124int rt2x00mac_start(struct ieee80211_hw *hw)
125{
126 struct rt2x00_dev *rt2x00dev = hw->priv;
127 int status;
128
129 if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
130 return 0;
131
132 /*
133 * If this is the first interface which is added,
134 * we should load the firmware now.
135 */
136 if (test_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags)) {
137 status = rt2x00lib_load_firmware(rt2x00dev);
138 if (status)
139 return status;
140 }
141
142 /*
143 * Initialize the device.
144 */
145 status = rt2x00lib_initialize(rt2x00dev);
146 if (status)
147 return status;
148
149 /*
150 * Enable radio.
151 */
152 status = rt2x00lib_enable_radio(rt2x00dev);
153 if (status) {
154 rt2x00lib_uninitialize(rt2x00dev);
155 return status;
156 }
157
158 return 0;
159}
160EXPORT_SYMBOL_GPL(rt2x00mac_start);
161
162void rt2x00mac_stop(struct ieee80211_hw *hw)
163{
164 struct rt2x00_dev *rt2x00dev = hw->priv;
165
166 /*
167 * Perhaps we can add something smarter here,
168 * but for now just disabling the radio should do.
169 */
170 rt2x00lib_disable_radio(rt2x00dev);
171}
172EXPORT_SYMBOL_GPL(rt2x00mac_stop);
173
174int rt2x00mac_add_interface(struct ieee80211_hw *hw,
175 struct ieee80211_if_init_conf *conf)
176{
177 struct rt2x00_dev *rt2x00dev = hw->priv;
178 struct interface *intf = &rt2x00dev->interface;
179 int retval;
180
181 /*
182 * We only support 1 non-monitor interface.
183 */
184 if (conf->type != IEEE80211_IF_TYPE_MNTR && is_interface_present(intf))
185 return -ENOBUFS;
186
187 /*
188 * HACK: Placeholder until start/stop handler has been
189 * added to the mac80211 callback functions structure.
190 */
191 retval = rt2x00mac_start(hw);
192 if (retval)
193 return retval;
194
195 /*
196 * We support muliple monitor mode interfaces.
197 * All we need to do is increase the monitor_count.
198 */
199 if (conf->type == IEEE80211_IF_TYPE_MNTR) {
200 intf->monitor_count++;
201 } else {
202 intf->id = conf->if_id;
203 intf->type = conf->type;
204 if (conf->type == IEEE80211_IF_TYPE_AP)
205 memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN);
206 memcpy(&intf->mac, conf->mac_addr, ETH_ALEN);
207 intf->filter = 0;
208 }
209
210 /*
211 * Configure interface.
212 * The MAC adddress must be configured after the device
213 * has been initialized. Else the device can reset the
214 * MAC registers.
215 */
216 rt2x00lib_config_mac_addr(rt2x00dev, intf->mac);
217 rt2x00lib_config_type(rt2x00dev, conf->type);
218 rt2x00lib_config_packet_filter(rt2x00dev, intf->filter);
219
220 return 0;
221}
222EXPORT_SYMBOL_GPL(rt2x00mac_add_interface);
223
224void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
225 struct ieee80211_if_init_conf *conf)
226{
227 struct rt2x00_dev *rt2x00dev = hw->priv;
228 struct interface *intf = &rt2x00dev->interface;
229
230 /*
231 * We only support 1 non-monitor interface.
232 */
233 if (conf->type != IEEE80211_IF_TYPE_MNTR && !is_interface_present(intf))
234 return;
235
236 /*
237 * When removing an monitor interface, decrease monitor_count.
238 * For non-monitor interfaces, all interface data needs to be reset.
239 */
240 if (conf->type == IEEE80211_IF_TYPE_MNTR) {
241 intf->monitor_count--;
242 } else if (intf->type == conf->type) {
243 intf->id = 0;
244 intf->type = INVALID_INTERFACE;
245 memset(&intf->bssid, 0x00, ETH_ALEN);
246 memset(&intf->mac, 0x00, ETH_ALEN);
247 intf->filter = 0;
248 }
249
250 /*
251 * Make sure the bssid and mac address registers
252 * are cleared to prevent false ACKing of frames.
253 */
254 rt2x00lib_config_mac_addr(rt2x00dev, intf->mac);
255 rt2x00lib_config_bssid(rt2x00dev, intf->bssid);
256 rt2x00lib_config_type(rt2x00dev, intf->type);
257
258 /*
259 * HACK: Placeholder untill start/stop handler has been
260 * added to the mac80211 callback functions structure.
261 */
262 rt2x00mac_stop(hw);
263}
264EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
265
266int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
267{
268 struct rt2x00_dev *rt2x00dev = hw->priv;
269
270 /*
271 * If the device is not initialized we shouldn't accept
272 * any configuration changes. Mac80211 might be calling
273 * this function while we are trying to remove the device
274 * or perhaps suspending it.
275 */
276 if (!test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
277 return 0;
278
279 /*
280 * Check if we need to disable the radio,
281 * if this is not the case, at least the RX must be disabled.
282 */
283 if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) {
284 if (!conf->radio_enabled)
285 rt2x00lib_disable_radio(rt2x00dev);
286 else
287 rt2x00lib_toggle_rx(rt2x00dev, 0);
288 }
289
290 rt2x00lib_config(rt2x00dev, conf);
291
292 /*
293 * If promisc mode cannot be configured in irq context,
294 * then it is now the time to configure it.
295 */
296 if (test_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags))
297 rt2x00lib_config_packet_filter(rt2x00dev,
298 rt2x00dev->interface.filter);
299
300 /*
301 * Reenable RX only if the radio should be on.
302 */
303 if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
304 rt2x00lib_toggle_rx(rt2x00dev, 1);
305 else if (conf->radio_enabled)
306 return rt2x00lib_enable_radio(rt2x00dev);
307
308 return 0;
309}
310EXPORT_SYMBOL_GPL(rt2x00mac_config);
311
312int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id,
313 struct ieee80211_if_conf *conf)
314{
315 struct rt2x00_dev *rt2x00dev = hw->priv;
316 struct interface *intf = &rt2x00dev->interface;
317 int status;
318
319 /*
320 * If the device is not initialized we shouldn't accept
321 * any configuration changes. Mac80211 might be calling
322 * this function while we are trying to remove the device
323 * or perhaps suspending it.
324 */
325 if (!test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
326 return 0;
327
328 /*
329 * Monitor mode does not need configuring.
330 * If the given type does not match the configured type,
331 * there has been a problem.
332 */
333 if (conf->type == IEEE80211_IF_TYPE_MNTR)
334 return 0;
335 else if (conf->type != intf->type)
336 return -EINVAL;
337
338 /*
339 * If the interface does not work in master mode,
340 * then the bssid value in the interface structure
341 * should now be set.
342 */
343 if (conf->type != IEEE80211_IF_TYPE_AP)
344 memcpy(&intf->bssid, conf->bssid, ETH_ALEN);
345 rt2x00lib_config_bssid(rt2x00dev, intf->bssid);
346
347 /*
348 * We only need to initialize the beacon when master mode is enabled.
349 */
350 if (conf->type != IEEE80211_IF_TYPE_AP || !conf->beacon)
351 return 0;
352
353 status = rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw,
354 conf->beacon,
355 conf->beacon_control);
356 if (status)
357 dev_kfree_skb(conf->beacon);
358
359 return status;
360}
361EXPORT_SYMBOL_GPL(rt2x00mac_config_interface);
362
363void rt2x00mac_set_multicast_list(struct ieee80211_hw *hw,
364 unsigned short flags, int mc_count)
365{
366 struct rt2x00_dev *rt2x00dev = hw->priv;
367
368 /*
369 * Check if the new state is different then the old state.
370 */
371 if (rt2x00dev->interface.filter == flags)
372 return;
373
374 rt2x00dev->interface.filter = flags;
375
376 /*
377 * Raise the pending bit to indicate the
378 * packet filter should be updated.
379 */
380 __set_bit(PACKET_FILTER_PENDING, &rt2x00dev->flags);
381
382 /*
383 * Check if Packet filter actions are allowed in
384 * atomic context. If not, raise the pending flag and
385 * let it be.
386 */
387 if (!test_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags) ||
388 !in_atomic())
389 rt2x00lib_config_packet_filter(rt2x00dev, flags);
390}
391EXPORT_SYMBOL_GPL(rt2x00mac_set_multicast_list);
392
393int rt2x00mac_get_stats(struct ieee80211_hw *hw,
394 struct ieee80211_low_level_stats *stats)
395{
396 struct rt2x00_dev *rt2x00dev = hw->priv;
397
398 /*
399 * The dot11ACKFailureCount, dot11RTSFailureCount and
400 * dot11RTSSuccessCount are updated in interrupt time.
401 * dot11FCSErrorCount is updated in the link tuner.
402 */
403 memcpy(stats, &rt2x00dev->low_level_stats, sizeof(*stats));
404
405 return 0;
406}
407EXPORT_SYMBOL_GPL(rt2x00mac_get_stats);
408
409int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
410 struct ieee80211_tx_queue_stats *stats)
411{
412 struct rt2x00_dev *rt2x00dev = hw->priv;
413 unsigned int i;
414
415 for (i = 0; i < hw->queues; i++)
416 memcpy(&stats->data[i], &rt2x00dev->tx[i].stats,
417 sizeof(rt2x00dev->tx[i].stats));
418
419 return 0;
420}
421EXPORT_SYMBOL_GPL(rt2x00mac_get_tx_stats);
422
423int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue,
424 const struct ieee80211_tx_queue_params *params)
425{
426 struct rt2x00_dev *rt2x00dev = hw->priv;
427 struct data_ring *ring;
428
429 ring = rt2x00lib_get_ring(rt2x00dev, queue);
430 if (unlikely(!ring))
431 return -EINVAL;
432
433 /*
434 * The passed variables are stored as real value ((2^n)-1).
435 * Ralink registers require to know the bit number 'n'.
436 */
437 if (params->cw_min)
438 ring->tx_params.cw_min = fls(params->cw_min);
439 else
440 ring->tx_params.cw_min = 5; /* cw_min: 2^5 = 32. */
441
442 if (params->cw_max)
443 ring->tx_params.cw_max = fls(params->cw_max);
444 else
445 ring->tx_params.cw_max = 10; /* cw_min: 2^10 = 1024. */
446
447 if (params->aifs)
448 ring->tx_params.aifs = params->aifs;
449 else
450 ring->tx_params.aifs = 2;
451
452 INFO(rt2x00dev,
453 "Configured TX ring %d - CWmin: %d, CWmax: %d, Aifs: %d.\n",
454 queue, ring->tx_params.cw_min, ring->tx_params.cw_max,
455 ring->tx_params.aifs);
456
457 return 0;
458}
459EXPORT_SYMBOL_GPL(rt2x00mac_conf_tx);
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
new file mode 100644
index 000000000000..85629f1999ab
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -0,0 +1,481 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00pci
23 Abstract: rt2x00 generic pci device routines.
24 */
25
26/*
27 * Set enviroment defines for rt2x00.h
28 */
29#define DRV_NAME "rt2x00pci"
30
31#include <linux/dma-mapping.h>
32#include <linux/kernel.h>
33#include <linux/module.h>
34#include <linux/pci.h>
35
36#include "rt2x00.h"
37#include "rt2x00pci.h"
38
39/*
40 * Beacon handlers.
41 */
42int rt2x00pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
43 struct ieee80211_tx_control *control)
44{
45 struct rt2x00_dev *rt2x00dev = hw->priv;
46 struct data_ring *ring =
47 rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
48 struct data_entry *entry = rt2x00_get_data_entry(ring);
49
50 /*
51 * Just in case mac80211 doesn't set this correctly,
52 * but we need this queue set for the descriptor
53 * initialization.
54 */
55 control->queue = IEEE80211_TX_QUEUE_BEACON;
56
57 /*
58 * Update the beacon entry.
59 */
60 memcpy(entry->data_addr, skb->data, skb->len);
61 rt2x00lib_write_tx_desc(rt2x00dev, entry->priv,
62 (struct ieee80211_hdr *)skb->data,
63 skb->len, control);
64
65 /*
66 * Enable beacon generation.
67 */
68 rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue);
69
70 return 0;
71}
72EXPORT_SYMBOL_GPL(rt2x00pci_beacon_update);
73
74/*
75 * TX data handlers.
76 */
77int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev,
78 struct data_ring *ring, struct sk_buff *skb,
79 struct ieee80211_tx_control *control)
80{
81 struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
82 struct data_entry *entry = rt2x00_get_data_entry(ring);
83 struct data_desc *txd = entry->priv;
84 u32 word;
85
86 if (rt2x00_ring_full(ring)) {
87 ieee80211_stop_queue(rt2x00dev->hw, control->queue);
88 return -EINVAL;
89 }
90
91 rt2x00_desc_read(txd, 0, &word);
92
93 if (rt2x00_get_field32(word, TXD_ENTRY_OWNER_NIC) ||
94 rt2x00_get_field32(word, TXD_ENTRY_VALID)) {
95 ERROR(rt2x00dev,
96 "Arrived at non-free entry in the non-full queue %d.\n"
97 "Please file bug report to %s.\n",
98 control->queue, DRV_PROJECT);
99 ieee80211_stop_queue(rt2x00dev->hw, control->queue);
100 return -EINVAL;
101 }
102
103 entry->skb = skb;
104 memcpy(&entry->tx_status.control, control, sizeof(*control));
105 memcpy(entry->data_addr, skb->data, skb->len);
106 rt2x00lib_write_tx_desc(rt2x00dev, txd, ieee80211hdr,
107 skb->len, control);
108
109 rt2x00_ring_index_inc(ring);
110
111 if (rt2x00_ring_full(ring))
112 ieee80211_stop_queue(rt2x00dev->hw, control->queue);
113
114 return 0;
115}
116EXPORT_SYMBOL_GPL(rt2x00pci_write_tx_data);
117
118/*
119 * RX data handlers.
120 */
121void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
122{
123 struct data_ring *ring = rt2x00dev->rx;
124 struct data_entry *entry;
125 struct data_desc *rxd;
126 struct sk_buff *skb;
127 u32 desc;
128 int retval;
129 int signal;
130 int rssi;
131 int ofdm;
132 int size;
133
134 while (1) {
135 entry = rt2x00_get_data_entry(ring);
136 rxd = entry->priv;
137 rt2x00_desc_read(rxd, 0, &desc);
138
139 if (rt2x00_get_field32(desc, RXD_ENTRY_OWNER_NIC))
140 break;
141
142 retval = rt2x00dev->ops->lib->fill_rxdone(entry, &signal,
143 &rssi, &ofdm, &size);
144 if (retval)
145 goto skip_entry;
146
147 /*
148 * Allocate the sk_buffer, initialize it and copy
149 * all data into it.
150 */
151 skb = dev_alloc_skb(size + NET_IP_ALIGN);
152 if (!skb)
153 return;
154
155 skb_reserve(skb, NET_IP_ALIGN);
156 skb_put(skb, size);
157 memcpy(skb->data, entry->data_addr, size);
158
159 /*
160 * Send the frame to rt2x00lib for further processing.
161 */
162 rt2x00lib_rxdone(entry, skb, signal, rssi, ofdm);
163
164skip_entry:
165 if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) {
166 rt2x00_set_field32(&desc, RXD_ENTRY_OWNER_NIC, 1);
167 rt2x00_desc_write(rxd, 0, desc);
168 }
169
170 rt2x00_ring_index_inc(ring);
171 }
172}
173EXPORT_SYMBOL_GPL(rt2x00pci_rxdone);
174
175/*
176 * Device initialization handlers.
177 */
178#define priv_offset(__ring, __i) \
179({ \
180 ring->data_addr + (i * ring->desc_size); \
181})
182
183#define data_addr_offset(__ring, __i) \
184({ \
185 (__ring)->data_addr + \
186 ((__ring)->stats.limit * (__ring)->desc_size) + \
187 ((__i) * (__ring)->data_size); \
188})
189
190#define data_dma_offset(__ring, __i) \
191({ \
192 (__ring)->data_dma + \
193 ((__ring)->stats.limit * (__ring)->desc_size) + \
194 ((__i) * (__ring)->data_size); \
195})
196
197static int rt2x00pci_alloc_dma(struct rt2x00_dev *rt2x00dev,
198 struct data_ring *ring)
199{
200 unsigned int i;
201
202 /*
203 * Allocate DMA memory for descriptor and buffer.
204 */
205 ring->data_addr = pci_alloc_consistent(rt2x00dev_pci(rt2x00dev),
206 rt2x00_get_ring_size(ring),
207 &ring->data_dma);
208 if (!ring->data_addr)
209 return -ENOMEM;
210
211 /*
212 * Initialize all ring entries to contain valid
213 * addresses.
214 */
215 for (i = 0; i < ring->stats.limit; i++) {
216 ring->entry[i].priv = priv_offset(ring, i);
217 ring->entry[i].data_addr = data_addr_offset(ring, i);
218 ring->entry[i].data_dma = data_dma_offset(ring, i);
219 }
220
221 return 0;
222}
223
224static void rt2x00pci_free_dma(struct rt2x00_dev *rt2x00dev,
225 struct data_ring *ring)
226{
227 if (ring->data_addr)
228 pci_free_consistent(rt2x00dev_pci(rt2x00dev),
229 rt2x00_get_ring_size(ring),
230 ring->data_addr, ring->data_dma);
231 ring->data_addr = NULL;
232}
233
234int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
235{
236 struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev);
237 struct data_ring *ring;
238 int status;
239
240 /*
241 * Allocate DMA
242 */
243 ring_for_each(rt2x00dev, ring) {
244 status = rt2x00pci_alloc_dma(rt2x00dev, ring);
245 if (status)
246 goto exit;
247 }
248
249 /*
250 * Register interrupt handler.
251 */
252 status = request_irq(pci_dev->irq, rt2x00dev->ops->lib->irq_handler,
253 IRQF_SHARED, pci_name(pci_dev), rt2x00dev);
254 if (status) {
255 ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
256 pci_dev->irq, status);
257 return status;
258 }
259
260 return 0;
261
262exit:
263 rt2x00pci_uninitialize(rt2x00dev);
264
265 return status;
266}
267EXPORT_SYMBOL_GPL(rt2x00pci_initialize);
268
269void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev)
270{
271 struct data_ring *ring;
272
273 /*
274 * Free irq line.
275 */
276 free_irq(rt2x00dev_pci(rt2x00dev)->irq, rt2x00dev);
277
278 /*
279 * Free DMA
280 */
281 ring_for_each(rt2x00dev, ring)
282 rt2x00pci_free_dma(rt2x00dev, ring);
283}
284EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize);
285
286/*
287 * PCI driver handlers.
288 */
289static void rt2x00pci_free_reg(struct rt2x00_dev *rt2x00dev)
290{
291 kfree(rt2x00dev->rf);
292 rt2x00dev->rf = NULL;
293
294 kfree(rt2x00dev->eeprom);
295 rt2x00dev->eeprom = NULL;
296
297 if (rt2x00dev->csr_addr) {
298 iounmap(rt2x00dev->csr_addr);
299 rt2x00dev->csr_addr = NULL;
300 }
301}
302
303static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev)
304{
305 struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev);
306
307 rt2x00dev->csr_addr = ioremap(pci_resource_start(pci_dev, 0),
308 pci_resource_len(pci_dev, 0));
309 if (!rt2x00dev->csr_addr)
310 goto exit;
311
312 rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
313 if (!rt2x00dev->eeprom)
314 goto exit;
315
316 rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
317 if (!rt2x00dev->rf)
318 goto exit;
319
320 return 0;
321
322exit:
323 ERROR_PROBE("Failed to allocate registers.\n");
324
325 rt2x00pci_free_reg(rt2x00dev);
326
327 return -ENOMEM;
328}
329
330int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
331{
332 struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_data;
333 struct ieee80211_hw *hw;
334 struct rt2x00_dev *rt2x00dev;
335 int retval;
336
337 retval = pci_request_regions(pci_dev, pci_name(pci_dev));
338 if (retval) {
339 ERROR_PROBE("PCI request regions failed.\n");
340 return retval;
341 }
342
343 retval = pci_enable_device(pci_dev);
344 if (retval) {
345 ERROR_PROBE("Enable device failed.\n");
346 goto exit_release_regions;
347 }
348
349 pci_set_master(pci_dev);
350
351 if (pci_set_mwi(pci_dev))
352 ERROR_PROBE("MWI not available.\n");
353
354 if (pci_set_dma_mask(pci_dev, DMA_64BIT_MASK) &&
355 pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
356 ERROR_PROBE("PCI DMA not supported.\n");
357 retval = -EIO;
358 goto exit_disable_device;
359 }
360
361 hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
362 if (!hw) {
363 ERROR_PROBE("Failed to allocate hardware.\n");
364 retval = -ENOMEM;
365 goto exit_disable_device;
366 }
367
368 pci_set_drvdata(pci_dev, hw);
369
370 rt2x00dev = hw->priv;
371 rt2x00dev->dev = pci_dev;
372 rt2x00dev->ops = ops;
373 rt2x00dev->hw = hw;
374
375 retval = rt2x00pci_alloc_reg(rt2x00dev);
376 if (retval)
377 goto exit_free_device;
378
379 retval = rt2x00lib_probe_dev(rt2x00dev);
380 if (retval)
381 goto exit_free_reg;
382
383 return 0;
384
385exit_free_reg:
386 rt2x00pci_free_reg(rt2x00dev);
387
388exit_free_device:
389 ieee80211_free_hw(hw);
390
391exit_disable_device:
392 if (retval != -EBUSY)
393 pci_disable_device(pci_dev);
394
395exit_release_regions:
396 pci_release_regions(pci_dev);
397
398 pci_set_drvdata(pci_dev, NULL);
399
400 return retval;
401}
402EXPORT_SYMBOL_GPL(rt2x00pci_probe);
403
404void rt2x00pci_remove(struct pci_dev *pci_dev)
405{
406 struct ieee80211_hw *hw = pci_get_drvdata(pci_dev);
407 struct rt2x00_dev *rt2x00dev = hw->priv;
408
409 /*
410 * Free all allocated data.
411 */
412 rt2x00lib_remove_dev(rt2x00dev);
413 rt2x00pci_free_reg(rt2x00dev);
414 ieee80211_free_hw(hw);
415
416 /*
417 * Free the PCI device data.
418 */
419 pci_set_drvdata(pci_dev, NULL);
420 pci_disable_device(pci_dev);
421 pci_release_regions(pci_dev);
422}
423EXPORT_SYMBOL_GPL(rt2x00pci_remove);
424
425#ifdef CONFIG_PM
426int rt2x00pci_suspend(struct pci_dev *pci_dev, pm_message_t state)
427{
428 struct ieee80211_hw *hw = pci_get_drvdata(pci_dev);
429 struct rt2x00_dev *rt2x00dev = hw->priv;
430 int retval;
431
432 retval = rt2x00lib_suspend(rt2x00dev, state);
433 if (retval)
434 return retval;
435
436 rt2x00pci_free_reg(rt2x00dev);
437
438 pci_save_state(pci_dev);
439 pci_disable_device(pci_dev);
440 return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
441}
442EXPORT_SYMBOL_GPL(rt2x00pci_suspend);
443
444int rt2x00pci_resume(struct pci_dev *pci_dev)
445{
446 struct ieee80211_hw *hw = pci_get_drvdata(pci_dev);
447 struct rt2x00_dev *rt2x00dev = hw->priv;
448 int retval;
449
450 if (pci_set_power_state(pci_dev, PCI_D0) ||
451 pci_enable_device(pci_dev) ||
452 pci_restore_state(pci_dev)) {
453 ERROR(rt2x00dev, "Failed to resume device.\n");
454 return -EIO;
455 }
456
457 retval = rt2x00pci_alloc_reg(rt2x00dev);
458 if (retval)
459 return retval;
460
461 retval = rt2x00lib_resume(rt2x00dev);
462 if (retval)
463 goto exit_free_reg;
464
465 return 0;
466
467exit_free_reg:
468 rt2x00pci_free_reg(rt2x00dev);
469
470 return retval;
471}
472EXPORT_SYMBOL_GPL(rt2x00pci_resume);
473#endif /* CONFIG_PM */
474
475/*
476 * rt2x00pci module information.
477 */
478MODULE_AUTHOR(DRV_PROJECT);
479MODULE_VERSION(DRV_VERSION);
480MODULE_DESCRIPTION("rt2x00 library");
481MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h
new file mode 100644
index 000000000000..82adeac061d0
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
@@ -0,0 +1,127 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00pci
23 Abstract: Data structures for the rt2x00pci module.
24 */
25
26#ifndef RT2X00PCI_H
27#define RT2X00PCI_H
28
29#include <linux/io.h>
30
31/*
32 * This variable should be used with the
33 * pci_driver structure initialization.
34 */
35#define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops)
36
37/*
38 * Register defines.
39 * Some registers require multiple attempts before success,
40 * in those cases REGISTER_BUSY_COUNT attempts should be
41 * taken with a REGISTER_BUSY_DELAY interval.
42 */
43#define REGISTER_BUSY_COUNT 5
44#define REGISTER_BUSY_DELAY 100
45
46/*
47 * Descriptor availability flags.
48 * All PCI device descriptors have these 2 flags
49 * with the exact same definition.
50 * By storing them here we can use them inside rt2x00pci
51 * for some simple entry availability checking.
52 */
53#define TXD_ENTRY_OWNER_NIC FIELD32(0x00000001)
54#define TXD_ENTRY_VALID FIELD32(0x00000002)
55#define RXD_ENTRY_OWNER_NIC FIELD32(0x00000001)
56
57/*
58 * Register access.
59 */
60static inline void rt2x00pci_register_read(const struct rt2x00_dev *rt2x00dev,
61 const unsigned long offset,
62 u32 *value)
63{
64 *value = readl(rt2x00dev->csr_addr + offset);
65}
66
67static inline void
68rt2x00pci_register_multiread(const struct rt2x00_dev *rt2x00dev,
69 const unsigned long offset,
70 void *value, const u16 length)
71{
72 memcpy_fromio(value, rt2x00dev->csr_addr + offset, length);
73}
74
75static inline void rt2x00pci_register_write(const struct rt2x00_dev *rt2x00dev,
76 const unsigned long offset,
77 u32 value)
78{
79 writel(value, rt2x00dev->csr_addr + offset);
80}
81
82static inline void
83rt2x00pci_register_multiwrite(const struct rt2x00_dev *rt2x00dev,
84 const unsigned long offset,
85 void *value, const u16 length)
86{
87 memcpy_toio(rt2x00dev->csr_addr + offset, value, length);
88}
89
90/*
91 * Beacon handlers.
92 */
93int rt2x00pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
94 struct ieee80211_tx_control *control);
95
96/*
97 * TX data handlers.
98 */
99int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev,
100 struct data_ring *ring, struct sk_buff *skb,
101 struct ieee80211_tx_control *control);
102
103/*
104 * RX data handlers.
105 */
106void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev);
107
108/*
109 * Device initialization handlers.
110 */
111int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev);
112void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev);
113
114/*
115 * PCI driver handlers.
116 */
117int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id);
118void rt2x00pci_remove(struct pci_dev *pci_dev);
119#ifdef CONFIG_PM
120int rt2x00pci_suspend(struct pci_dev *pci_dev, pm_message_t state);
121int rt2x00pci_resume(struct pci_dev *pci_dev);
122#else
123#define rt2x00pci_suspend NULL
124#define rt2x00pci_resume NULL
125#endif /* CONFIG_PM */
126
127#endif /* RT2X00PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
new file mode 100644
index 000000000000..7927d5f7bcc7
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -0,0 +1,283 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00
23 Abstract: rt2x00 generic register information.
24 */
25
26#ifndef RT2X00REG_H
27#define RT2X00REG_H
28
29/*
30 * TX result flags.
31 */
32enum TX_STATUS {
33 TX_SUCCESS = 0,
34 TX_SUCCESS_RETRY = 1,
35 TX_FAIL_RETRY = 2,
36 TX_FAIL_INVALID = 3,
37 TX_FAIL_OTHER = 4,
38};
39
40/*
41 * Antenna values
42 */
43enum antenna {
44 ANTENNA_SW_DIVERSITY = 0,
45 ANTENNA_A = 1,
46 ANTENNA_B = 2,
47 ANTENNA_HW_DIVERSITY = 3,
48};
49
50/*
51 * Led mode values.
52 */
53enum led_mode {
54 LED_MODE_DEFAULT = 0,
55 LED_MODE_TXRX_ACTIVITY = 1,
56 LED_MODE_SIGNAL_STRENGTH = 2,
57 LED_MODE_ASUS = 3,
58 LED_MODE_ALPHA = 4,
59};
60
61/*
62 * Device states
63 */
64enum dev_state {
65 STATE_DEEP_SLEEP = 0,
66 STATE_SLEEP = 1,
67 STATE_STANDBY = 2,
68 STATE_AWAKE = 3,
69
70/*
71 * Additional device states, these values are
72 * not strict since they are not directly passed
73 * into the device.
74 */
75 STATE_RADIO_ON,
76 STATE_RADIO_OFF,
77 STATE_RADIO_RX_ON,
78 STATE_RADIO_RX_OFF,
79 STATE_RADIO_IRQ_ON,
80 STATE_RADIO_IRQ_OFF,
81};
82
83/*
84 * IFS backoff values
85 */
86enum ifs {
87 IFS_BACKOFF = 0,
88 IFS_SIFS = 1,
89 IFS_NEW_BACKOFF = 2,
90 IFS_NONE = 3,
91};
92
93/*
94 * Cipher types for hardware encryption
95 */
96enum cipher {
97 CIPHER_NONE = 0,
98 CIPHER_WEP64 = 1,
99 CIPHER_WEP128 = 2,
100 CIPHER_TKIP = 3,
101 CIPHER_AES = 4,
102/*
103 * The following fields were added by rt61pci and rt73usb.
104 */
105 CIPHER_CKIP64 = 5,
106 CIPHER_CKIP128 = 6,
107 CIPHER_TKIP_NO_MIC = 7,
108};
109
110/*
111 * Register handlers.
112 * We store the position of a register field inside a field structure,
113 * This will simplify the process of setting and reading a certain field
114 * inside the register while making sure the process remains byte order safe.
115 */
116struct rt2x00_field8 {
117 u8 bit_offset;
118 u8 bit_mask;
119};
120
121struct rt2x00_field16 {
122 u16 bit_offset;
123 u16 bit_mask;
124};
125
126struct rt2x00_field32 {
127 u32 bit_offset;
128 u32 bit_mask;
129};
130
131/*
132 * Power of two check, this will check
133 * if the mask that has been given contains
134 * and contiguous set of bits.
135 */
136#define is_power_of_two(x) ( !((x) & ((x)-1)) )
137#define low_bit_mask(x) ( ((x)-1) & ~(x) )
138#define is_valid_mask(x) is_power_of_two(1 + (x) + low_bit_mask(x))
139
140#define FIELD8(__mask) \
141({ \
142 BUILD_BUG_ON(!(__mask) || \
143 !is_valid_mask(__mask) || \
144 (__mask) != (u8)(__mask)); \
145 (struct rt2x00_field8) { \
146 __ffs(__mask), (__mask) \
147 }; \
148})
149
150#define FIELD16(__mask) \
151({ \
152 BUILD_BUG_ON(!(__mask) || \
153 !is_valid_mask(__mask) || \
154 (__mask) != (u16)(__mask));\
155 (struct rt2x00_field16) { \
156 __ffs(__mask), (__mask) \
157 }; \
158})
159
160#define FIELD32(__mask) \
161({ \
162 BUILD_BUG_ON(!(__mask) || \
163 !is_valid_mask(__mask) || \
164 (__mask) != (u32)(__mask));\
165 (struct rt2x00_field32) { \
166 __ffs(__mask), (__mask) \
167 }; \
168})
169
170static inline void rt2x00_set_field32(u32 *reg,
171 const struct rt2x00_field32 field,
172 const u32 value)
173{
174 *reg &= ~(field.bit_mask);
175 *reg |= (value << field.bit_offset) & field.bit_mask;
176}
177
178static inline u32 rt2x00_get_field32(const u32 reg,
179 const struct rt2x00_field32 field)
180{
181 return (reg & field.bit_mask) >> field.bit_offset;
182}
183
184static inline void rt2x00_set_field16(u16 *reg,
185 const struct rt2x00_field16 field,
186 const u16 value)
187{
188 *reg &= ~(field.bit_mask);
189 *reg |= (value << field.bit_offset) & field.bit_mask;
190}
191
192static inline u16 rt2x00_get_field16(const u16 reg,
193 const struct rt2x00_field16 field)
194{
195 return (reg & field.bit_mask) >> field.bit_offset;
196}
197
198static inline void rt2x00_set_field8(u8 *reg,
199 const struct rt2x00_field8 field,
200 const u8 value)
201{
202 *reg &= ~(field.bit_mask);
203 *reg |= (value << field.bit_offset) & field.bit_mask;
204}
205
206static inline u8 rt2x00_get_field8(const u8 reg,
207 const struct rt2x00_field8 field)
208{
209 return (reg & field.bit_mask) >> field.bit_offset;
210}
211
212/*
213 * Device specific rate value.
214 * We will have to create the device specific rate value
215 * passed to the ieee80211 kernel. We need to make it a consist of
216 * multiple fields because we want to store more then 1 device specific
217 * values inside the value.
218 * 1 - rate, stored as 100 kbit/s.
219 * 2 - preamble, short_preamble enabled flag.
220 * 3 - MASK_RATE, which rates are enabled in this mode, this mask
221 * corresponds with the TX register format for the current device.
222 * 4 - plcp, 802.11b rates are device specific,
223 * 802.11g rates are set according to the ieee802.11a-1999 p.14.
224 * The bit to enable preamble is set in a seperate define.
225 */
226#define DEV_RATE FIELD32(0x000007ff)
227#define DEV_PREAMBLE FIELD32(0x00000800)
228#define DEV_RATEMASK FIELD32(0x00fff000)
229#define DEV_PLCP FIELD32(0xff000000)
230
231/*
232 * Bitfields
233 */
234#define DEV_RATEBIT_1MB ( 1 << 0 )
235#define DEV_RATEBIT_2MB ( 1 << 1 )
236#define DEV_RATEBIT_5_5MB ( 1 << 2 )
237#define DEV_RATEBIT_11MB ( 1 << 3 )
238#define DEV_RATEBIT_6MB ( 1 << 4 )
239#define DEV_RATEBIT_9MB ( 1 << 5 )
240#define DEV_RATEBIT_12MB ( 1 << 6 )
241#define DEV_RATEBIT_18MB ( 1 << 7 )
242#define DEV_RATEBIT_24MB ( 1 << 8 )
243#define DEV_RATEBIT_36MB ( 1 << 9 )
244#define DEV_RATEBIT_48MB ( 1 << 10 )
245#define DEV_RATEBIT_54MB ( 1 << 11 )
246
247/*
248 * Bitmasks for DEV_RATEMASK
249 */
250#define DEV_RATEMASK_1MB ( (DEV_RATEBIT_1MB << 1) -1 )
251#define DEV_RATEMASK_2MB ( (DEV_RATEBIT_2MB << 1) -1 )
252#define DEV_RATEMASK_5_5MB ( (DEV_RATEBIT_5_5MB << 1) -1 )
253#define DEV_RATEMASK_11MB ( (DEV_RATEBIT_11MB << 1) -1 )
254#define DEV_RATEMASK_6MB ( (DEV_RATEBIT_6MB << 1) -1 )
255#define DEV_RATEMASK_9MB ( (DEV_RATEBIT_9MB << 1) -1 )
256#define DEV_RATEMASK_12MB ( (DEV_RATEBIT_12MB << 1) -1 )
257#define DEV_RATEMASK_18MB ( (DEV_RATEBIT_18MB << 1) -1 )
258#define DEV_RATEMASK_24MB ( (DEV_RATEBIT_24MB << 1) -1 )
259#define DEV_RATEMASK_36MB ( (DEV_RATEBIT_36MB << 1) -1 )
260#define DEV_RATEMASK_48MB ( (DEV_RATEBIT_48MB << 1) -1 )
261#define DEV_RATEMASK_54MB ( (DEV_RATEBIT_54MB << 1) -1 )
262
263/*
264 * Bitmask groups of bitrates
265 */
266#define DEV_BASIC_RATEMASK \
267 ( DEV_RATEMASK_11MB | \
268 DEV_RATEBIT_6MB | DEV_RATEBIT_12MB | DEV_RATEBIT_24MB )
269
270#define DEV_CCK_RATEMASK ( DEV_RATEMASK_11MB )
271#define DEV_OFDM_RATEMASK ( DEV_RATEMASK_54MB & ~DEV_CCK_RATEMASK )
272
273/*
274 * Macro's to set and get specific fields from the device specific val and val2
275 * fields inside the ieee80211_rate entry.
276 */
277#define DEVICE_SET_RATE_FIELD(__value, __mask) \
278 (int)( ((__value) << DEV_##__mask.bit_offset) & DEV_##__mask.bit_mask )
279
280#define DEVICE_GET_RATE_FIELD(__value, __mask) \
281 (int)( ((__value) & DEV_##__mask.bit_mask) >> DEV_##__mask.bit_offset )
282
283#endif /* RT2X00REG_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
new file mode 100644
index 000000000000..dc5b696f4751
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
@@ -0,0 +1,148 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00rfkill
23 Abstract: rt2x00 rfkill routines.
24 */
25
26/*
27 * Set enviroment defines for rt2x00.h
28 */
29#define DRV_NAME "rt2x00lib"
30
31#include <linux/input-polldev.h>
32#include <linux/kernel.h>
33#include <linux/module.h>
34#include <linux/rfkill.h>
35
36#include "rt2x00.h"
37#include "rt2x00lib.h"
38
39static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state)
40{
41 struct rt2x00_dev *rt2x00dev = data;
42 int retval = 0;
43
44 if (unlikely(!rt2x00dev))
45 return 0;
46
47 /*
48 * Only continue if we have an active interface,
49 * either monitor or non-monitor should be present.
50 */
51 if (!is_interface_present(&rt2x00dev->interface) &&
52 !is_monitor_present(&rt2x00dev->interface))
53 return 0;
54
55 if (state == RFKILL_STATE_ON) {
56 INFO(rt2x00dev, "Hardware button pressed, enabling radio.\n");
57 __set_bit(DEVICE_ENABLED_RADIO_HW, &rt2x00dev->flags);
58 retval = rt2x00lib_enable_radio(rt2x00dev);
59 } else if (state == RFKILL_STATE_OFF) {
60 INFO(rt2x00dev, "Hardware button pressed, disabling radio.\n");
61 __clear_bit(DEVICE_ENABLED_RADIO_HW, &rt2x00dev->flags);
62 rt2x00lib_disable_radio(rt2x00dev);
63 }
64
65 return retval;
66}
67
68static void rt2x00rfkill_poll(struct input_polled_dev *poll_dev)
69{
70 struct rt2x00_dev *rt2x00dev = poll_dev->private;
71 int state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev);
72
73 if (rt2x00dev->rfkill->state != state)
74 input_report_key(poll_dev->input, KEY_WLAN, 1);
75}
76
77int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
78{
79 int retval;
80
81 if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
82 return 0;
83
84 retval = rfkill_register(rt2x00dev->rfkill);
85 if (retval) {
86 ERROR(rt2x00dev, "Failed to register rfkill handler.\n");
87 return retval;
88 }
89
90 retval = input_register_polled_device(rt2x00dev->poll_dev);
91 if (retval) {
92 ERROR(rt2x00dev, "Failed to register polled device.\n");
93 rfkill_unregister(rt2x00dev->rfkill);
94 return retval;
95 }
96
97 return 0;
98}
99
100void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
101{
102 if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
103 return;
104
105 input_unregister_polled_device(rt2x00dev->poll_dev);
106 rfkill_unregister(rt2x00dev->rfkill);
107}
108
109int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
110{
111 struct device *device = wiphy_dev(rt2x00dev->hw->wiphy);
112
113 if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
114 return 0;
115
116 rt2x00dev->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN);
117 if (!rt2x00dev->rfkill) {
118 ERROR(rt2x00dev, "Failed to allocate rfkill handler.\n");
119 return -ENOMEM;
120 }
121
122 rt2x00dev->rfkill->name = rt2x00dev->ops->name;
123 rt2x00dev->rfkill->data = rt2x00dev;
124 rt2x00dev->rfkill->state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev);
125 rt2x00dev->rfkill->toggle_radio = rt2x00rfkill_toggle_radio;
126
127 rt2x00dev->poll_dev = input_allocate_polled_device();
128 if (!rt2x00dev->poll_dev) {
129 ERROR(rt2x00dev, "Failed to allocate polled device.\n");
130 rfkill_free(rt2x00dev->rfkill);
131 return -ENOMEM;
132 }
133
134 rt2x00dev->poll_dev->private = rt2x00dev;
135 rt2x00dev->poll_dev->poll = rt2x00rfkill_poll;
136 rt2x00dev->poll_dev->poll_interval = RFKILL_POLL_INTERVAL;
137
138 return 0;
139}
140
141void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
142{
143 if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
144 return;
145
146 input_free_polled_device(rt2x00dev->poll_dev);
147 rfkill_free(rt2x00dev->rfkill);
148}
diff --git a/drivers/net/wireless/rt2x00/rt2x00ring.h b/drivers/net/wireless/rt2x00/rt2x00ring.h
new file mode 100644
index 000000000000..122c75248e74
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00ring.h
@@ -0,0 +1,255 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00
23 Abstract: rt2x00 ring datastructures and routines
24 */
25
26#ifndef RT2X00RING_H
27#define RT2X00RING_H
28
29/*
30 * data_desc
31 * Each data entry also contains a descriptor which is used by the
32 * device to determine what should be done with the packet and
33 * what the current status is.
34 * This structure is greatly simplified, but the descriptors
35 * are basically a list of little endian 32 bit values.
36 * Make the array by default 1 word big, this will allow us
37 * to use sizeof() correctly.
38 */
39struct data_desc {
40 __le32 word[1];
41};
42
43/*
44 * data_entry_desc
45 * Summary of information that should be written into the
46 * descriptor for sending a TX frame.
47 */
48struct data_entry_desc {
49 unsigned long flags;
50#define ENTRY_TXDONE 1
51#define ENTRY_TXD_RTS_FRAME 2
52#define ENTRY_TXD_OFDM_RATE 3
53#define ENTRY_TXD_MORE_FRAG 4
54#define ENTRY_TXD_REQ_TIMESTAMP 5
55#define ENTRY_TXD_BURST 6
56
57/*
58 * Queue ID. ID's 0-4 are data TX rings
59 */
60 int queue;
61#define QUEUE_MGMT 13
62#define QUEUE_RX 14
63#define QUEUE_OTHER 15
64
65 /*
66 * PLCP values.
67 */
68 u16 length_high;
69 u16 length_low;
70 u16 signal;
71 u16 service;
72
73 /*
74 * Timing information
75 */
76 int aifs;
77 int ifs;
78 int cw_min;
79 int cw_max;
80};
81
82/*
83 * data_entry
84 * The data ring is a list of data entries.
85 * Each entry holds a reference to the descriptor
86 * and the data buffer. For TX rings the reference to the
87 * sk_buff of the packet being transmitted is also stored here.
88 */
89struct data_entry {
90 /*
91 * Status flags
92 */
93 unsigned long flags;
94#define ENTRY_OWNER_NIC 1
95
96 /*
97 * Ring we belong to.
98 */
99 struct data_ring *ring;
100
101 /*
102 * sk_buff for the packet which is being transmitted
103 * in this entry (Only used with TX related rings).
104 */
105 struct sk_buff *skb;
106
107 /*
108 * Store a ieee80211_tx_status structure in each
109 * ring entry, this will optimize the txdone
110 * handler.
111 */
112 struct ieee80211_tx_status tx_status;
113
114 /*
115 * private pointer specific to driver.
116 */
117 void *priv;
118
119 /*
120 * Data address for this entry.
121 */
122 void *data_addr;
123 dma_addr_t data_dma;
124};
125
126/*
127 * data_ring
128 * Data rings are used by the device to send and receive packets.
129 * The data_addr is the base address of the data memory.
130 * To determine at which point in the ring we are,
131 * have to use the rt2x00_ring_index_*() functions.
132 */
133struct data_ring {
134 /*
135 * Pointer to main rt2x00dev structure where this
136 * ring belongs to.
137 */
138 struct rt2x00_dev *rt2x00dev;
139
140 /*
141 * Base address for the device specific data entries.
142 */
143 struct data_entry *entry;
144
145 /*
146 * TX queue statistic info.
147 */
148 struct ieee80211_tx_queue_stats_data stats;
149
150 /*
151 * TX Queue parameters.
152 */
153 struct ieee80211_tx_queue_params tx_params;
154
155 /*
156 * Base address for data ring.
157 */
158 dma_addr_t data_dma;
159 void *data_addr;
160
161 /*
162 * Index variables.
163 */
164 u16 index;
165 u16 index_done;
166
167 /*
168 * Size of packet and descriptor in bytes.
169 */
170 u16 data_size;
171 u16 desc_size;
172};
173
174/*
175 * Handlers to determine the address of the current device specific
176 * data entry, where either index or index_done points to.
177 */
178static inline struct data_entry *rt2x00_get_data_entry(struct data_ring *ring)
179{
180 return &ring->entry[ring->index];
181}
182
183static inline struct data_entry *rt2x00_get_data_entry_done(struct data_ring
184 *ring)
185{
186 return &ring->entry[ring->index_done];
187}
188
189/*
190 * Total ring memory
191 */
192static inline int rt2x00_get_ring_size(struct data_ring *ring)
193{
194 return ring->stats.limit * (ring->desc_size + ring->data_size);
195}
196
197/*
198 * Ring index manipulation functions.
199 */
200static inline void rt2x00_ring_index_inc(struct data_ring *ring)
201{
202 ring->index++;
203 if (ring->index >= ring->stats.limit)
204 ring->index = 0;
205 ring->stats.len++;
206}
207
208static inline void rt2x00_ring_index_done_inc(struct data_ring *ring)
209{
210 ring->index_done++;
211 if (ring->index_done >= ring->stats.limit)
212 ring->index_done = 0;
213 ring->stats.len--;
214 ring->stats.count++;
215}
216
217static inline void rt2x00_ring_index_clear(struct data_ring *ring)
218{
219 ring->index = 0;
220 ring->index_done = 0;
221 ring->stats.len = 0;
222 ring->stats.count = 0;
223}
224
225static inline int rt2x00_ring_empty(struct data_ring *ring)
226{
227 return ring->stats.len == 0;
228}
229
230static inline int rt2x00_ring_full(struct data_ring *ring)
231{
232 return ring->stats.len == ring->stats.limit;
233}
234
235static inline int rt2x00_ring_free(struct data_ring *ring)
236{
237 return ring->stats.limit - ring->stats.len;
238}
239
240/*
241 * TX/RX Descriptor access functions.
242 */
243static inline void rt2x00_desc_read(struct data_desc *desc,
244 const u8 word, u32 *value)
245{
246 *value = le32_to_cpu(desc->word[word]);
247}
248
249static inline void rt2x00_desc_write(struct data_desc *desc,
250 const u8 word, const u32 value)
251{
252 desc->word[word] = cpu_to_le32(value);
253}
254
255#endif /* RT2X00RING_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
new file mode 100644
index 000000000000..a0f05ca54bb4
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -0,0 +1,595 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00usb
23 Abstract: rt2x00 generic usb device routines.
24 */
25
26/*
27 * Set enviroment defines for rt2x00.h
28 */
29#define DRV_NAME "rt2x00usb"
30
31#include <linux/kernel.h>
32#include <linux/module.h>
33#include <linux/usb.h>
34
35#include "rt2x00.h"
36#include "rt2x00usb.h"
37
38/*
39 * Interfacing with the HW.
40 */
41int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev,
42 const u8 request, const u8 requesttype,
43 const u16 offset, const u16 value,
44 void *buffer, const u16 buffer_length,
45 u16 timeout)
46{
47 struct usb_device *usb_dev =
48 interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
49 int status;
50 unsigned int i;
51 unsigned int pipe =
52 (requesttype == USB_VENDOR_REQUEST_IN) ?
53 usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0);
54
55 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
56 status = usb_control_msg(usb_dev, pipe, request, requesttype,
57 value, offset, buffer, buffer_length,
58 timeout);
59 if (status >= 0)
60 return 0;
61
62 /*
63 * Check for errors,
64 * -ETIMEDOUT: We need a bit more time to complete.
65 * -ENODEV: Device has disappeared, no point continuing.
66 */
67 if (status == -ETIMEDOUT)
68 timeout *= 2;
69 else if (status == -ENODEV)
70 break;
71 }
72
73 ERROR(rt2x00dev,
74 "Vendor Request 0x%02x failed for offset 0x%04x with error %d.\n",
75 request, offset, status);
76
77 return status;
78}
79EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request);
80
81int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev,
82 const u8 request, const u8 requesttype,
83 const u16 offset, void *buffer,
84 const u16 buffer_length, u16 timeout)
85{
86 int status;
87
88 /*
89 * Check for Cache availability.
90 */
91 if (unlikely(!rt2x00dev->csr_cache || buffer_length > CSR_CACHE_SIZE)) {
92 ERROR(rt2x00dev, "CSR cache not available.\n");
93 return -ENOMEM;
94 }
95
96 if (requesttype == USB_VENDOR_REQUEST_OUT)
97 memcpy(rt2x00dev->csr_cache, buffer, buffer_length);
98
99 status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype,
100 offset, 0, rt2x00dev->csr_cache,
101 buffer_length, timeout);
102
103 if (!status && requesttype == USB_VENDOR_REQUEST_IN)
104 memcpy(buffer, rt2x00dev->csr_cache, buffer_length);
105
106 return status;
107}
108EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
109
110/*
111 * TX data handlers.
112 */
113static void rt2x00usb_interrupt_txdone(struct urb *urb)
114{
115 struct data_entry *entry = (struct data_entry *)urb->context;
116 struct data_ring *ring = entry->ring;
117 struct rt2x00_dev *rt2x00dev = ring->rt2x00dev;
118 struct data_desc *txd = (struct data_desc *)entry->skb->data;
119 u32 word;
120 int tx_status;
121
122 if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
123 !__test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags))
124 return;
125
126 rt2x00_desc_read(txd, 0, &word);
127
128 /*
129 * Remove the descriptor data from the buffer.
130 */
131 skb_pull(entry->skb, ring->desc_size);
132
133 /*
134 * Obtain the status about this packet.
135 */
136 tx_status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY;
137
138 rt2x00lib_txdone(entry, tx_status, 0);
139
140 /*
141 * Make this entry available for reuse.
142 */
143 entry->flags = 0;
144 rt2x00_ring_index_done_inc(entry->ring);
145
146 /*
147 * If the data ring was full before the txdone handler
148 * we must make sure the packet queue in the mac80211 stack
149 * is reenabled when the txdone handler has finished.
150 */
151 if (!rt2x00_ring_full(ring))
152 ieee80211_wake_queue(rt2x00dev->hw,
153 entry->tx_status.control.queue);
154}
155
156int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev,
157 struct data_ring *ring, struct sk_buff *skb,
158 struct ieee80211_tx_control *control)
159{
160 struct usb_device *usb_dev =
161 interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
162 struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
163 struct data_entry *entry = rt2x00_get_data_entry(ring);
164 u32 length = skb->len;
165
166 if (rt2x00_ring_full(ring)) {
167 ieee80211_stop_queue(rt2x00dev->hw, control->queue);
168 return -EINVAL;
169 }
170
171 if (test_bit(ENTRY_OWNER_NIC, &entry->flags)) {
172 ERROR(rt2x00dev,
173 "Arrived at non-free entry in the non-full queue %d.\n"
174 "Please file bug report to %s.\n",
175 control->queue, DRV_PROJECT);
176 ieee80211_stop_queue(rt2x00dev->hw, control->queue);
177 return -EINVAL;
178 }
179
180 /*
181 * Add the descriptor in front of the skb.
182 */
183 skb_push(skb, rt2x00dev->hw->extra_tx_headroom);
184 memset(skb->data, 0x00, rt2x00dev->hw->extra_tx_headroom);
185
186 rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data,
187 ieee80211hdr, length, control);
188 memcpy(&entry->tx_status.control, control, sizeof(*control));
189 entry->skb = skb;
190
191 /*
192 * Length passed to usb_fill_urb cannot be an odd number,
193 * so add 1 byte to make it even.
194 */
195 length += rt2x00dev->hw->extra_tx_headroom;
196 if (length % 2)
197 length++;
198
199 __set_bit(ENTRY_OWNER_NIC, &entry->flags);
200 usb_fill_bulk_urb(entry->priv, usb_dev,
201 usb_sndbulkpipe(usb_dev, 1),
202 skb->data, length, rt2x00usb_interrupt_txdone, entry);
203 usb_submit_urb(entry->priv, GFP_ATOMIC);
204
205 rt2x00_ring_index_inc(ring);
206
207 if (rt2x00_ring_full(ring))
208 ieee80211_stop_queue(rt2x00dev->hw, control->queue);
209
210 return 0;
211}
212EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data);
213
214/*
215 * RX data handlers.
216 */
217static void rt2x00usb_interrupt_rxdone(struct urb *urb)
218{
219 struct data_entry *entry = (struct data_entry *)urb->context;
220 struct data_ring *ring = entry->ring;
221 struct rt2x00_dev *rt2x00dev = ring->rt2x00dev;
222 struct sk_buff *skb;
223 int retval;
224 int signal;
225 int rssi;
226 int ofdm;
227 int size;
228 int frame_size;
229
230 if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
231 !test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags))
232 return;
233
234 /*
235 * Check if the received data is simply too small
236 * to be actually valid, or if the urb is signaling
237 * a problem.
238 */
239 if (urb->actual_length < entry->ring->desc_size || urb->status)
240 goto skip_entry;
241
242 retval = rt2x00dev->ops->lib->fill_rxdone(entry, &signal, &rssi,
243 &ofdm, &size);
244 if (retval)
245 goto skip_entry;
246
247 /*
248 * Allocate a new sk buffer to replace the current one.
249 * If allocation fails, we should drop the current frame
250 * so we can recycle the existing sk buffer for the new frame.
251 */
252 frame_size = entry->ring->data_size + entry->ring->desc_size;
253 skb = dev_alloc_skb(frame_size + NET_IP_ALIGN);
254 if (!skb)
255 goto skip_entry;
256
257 skb_reserve(skb, NET_IP_ALIGN);
258 skb_put(skb, frame_size);
259
260 /*
261 * Trim the skb_buffer to only contain the valid
262 * frame data (so ignore the device's descriptor).
263 */
264 skb_trim(entry->skb, size);
265
266 /*
267 * Send the frame to rt2x00lib for further processing.
268 */
269 rt2x00lib_rxdone(entry, entry->skb, signal, rssi, ofdm);
270
271 /*
272 * Replace current entry's skb with the newly allocated one,
273 * and reinitialize the urb.
274 */
275 entry->skb = skb;
276 urb->transfer_buffer = entry->skb->data;
277 urb->transfer_buffer_length = entry->skb->len;
278
279skip_entry:
280 if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) {
281 __set_bit(ENTRY_OWNER_NIC, &entry->flags);
282 usb_submit_urb(urb, GFP_ATOMIC);
283 }
284
285 rt2x00_ring_index_inc(ring);
286}
287
288/*
289 * Radio handlers
290 */
291void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev)
292{
293 struct usb_device *usb_dev =
294 interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
295 struct data_ring *ring;
296 struct data_entry *entry;
297 unsigned int i;
298
299 /*
300 * Initialize the TX rings
301 */
302 txringall_for_each(rt2x00dev, ring) {
303 for (i = 0; i < ring->stats.limit; i++)
304 ring->entry[i].flags = 0;
305
306 rt2x00_ring_index_clear(ring);
307 }
308
309 /*
310 * Initialize and start the RX ring.
311 */
312 rt2x00_ring_index_clear(rt2x00dev->rx);
313
314 for (i = 0; i < rt2x00dev->rx->stats.limit; i++) {
315 entry = &rt2x00dev->rx->entry[i];
316
317 usb_fill_bulk_urb(entry->priv, usb_dev,
318 usb_rcvbulkpipe(usb_dev, 1),
319 entry->skb->data, entry->skb->len,
320 rt2x00usb_interrupt_rxdone, entry);
321
322 __set_bit(ENTRY_OWNER_NIC, &entry->flags);
323 usb_submit_urb(entry->priv, GFP_ATOMIC);
324 }
325}
326EXPORT_SYMBOL_GPL(rt2x00usb_enable_radio);
327
328void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
329{
330 struct data_ring *ring;
331 unsigned int i;
332
333 rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0x0000, 0x0000,
334 REGISTER_TIMEOUT);
335
336 /*
337 * Cancel all rings.
338 */
339 ring_for_each(rt2x00dev, ring) {
340 for (i = 0; i < ring->stats.limit; i++)
341 usb_kill_urb(ring->entry[i].priv);
342 }
343}
344EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
345
346/*
347 * Device initialization handlers.
348 */
349static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev,
350 struct data_ring *ring)
351{
352 unsigned int i;
353
354 /*
355 * Allocate the URB's
356 */
357 for (i = 0; i < ring->stats.limit; i++) {
358 ring->entry[i].priv = usb_alloc_urb(0, GFP_KERNEL);
359 if (!ring->entry[i].priv)
360 return -ENOMEM;
361 }
362
363 return 0;
364}
365
366static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev,
367 struct data_ring *ring)
368{
369 unsigned int i;
370
371 if (!ring->entry)
372 return;
373
374 for (i = 0; i < ring->stats.limit; i++) {
375 usb_kill_urb(ring->entry[i].priv);
376 usb_free_urb(ring->entry[i].priv);
377 if (ring->entry[i].skb)
378 kfree_skb(ring->entry[i].skb);
379 }
380}
381
382int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev)
383{
384 struct data_ring *ring;
385 struct sk_buff *skb;
386 unsigned int entry_size;
387 unsigned int i;
388 int status;
389
390 /*
391 * Allocate DMA
392 */
393 ring_for_each(rt2x00dev, ring) {
394 status = rt2x00usb_alloc_urb(rt2x00dev, ring);
395 if (status)
396 goto exit;
397 }
398
399 /*
400 * For the RX ring, skb's should be allocated.
401 */
402 entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size;
403 for (i = 0; i < rt2x00dev->rx->stats.limit; i++) {
404 skb = dev_alloc_skb(NET_IP_ALIGN + entry_size);
405 if (!skb)
406 goto exit;
407
408 skb_reserve(skb, NET_IP_ALIGN);
409 skb_put(skb, entry_size);
410
411 rt2x00dev->rx->entry[i].skb = skb;
412 }
413
414 return 0;
415
416exit:
417 rt2x00usb_uninitialize(rt2x00dev);
418
419 return status;
420}
421EXPORT_SYMBOL_GPL(rt2x00usb_initialize);
422
423void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev)
424{
425 struct data_ring *ring;
426
427 ring_for_each(rt2x00dev, ring)
428 rt2x00usb_free_urb(rt2x00dev, ring);
429}
430EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize);
431
432/*
433 * USB driver handlers.
434 */
435static void rt2x00usb_free_reg(struct rt2x00_dev *rt2x00dev)
436{
437 kfree(rt2x00dev->rf);
438 rt2x00dev->rf = NULL;
439
440 kfree(rt2x00dev->eeprom);
441 rt2x00dev->eeprom = NULL;
442
443 kfree(rt2x00dev->csr_cache);
444 rt2x00dev->csr_cache = NULL;
445}
446
447static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev)
448{
449 rt2x00dev->csr_cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL);
450 if (!rt2x00dev->csr_cache)
451 goto exit;
452
453 rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
454 if (!rt2x00dev->eeprom)
455 goto exit;
456
457 rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
458 if (!rt2x00dev->rf)
459 goto exit;
460
461 return 0;
462
463exit:
464 ERROR_PROBE("Failed to allocate registers.\n");
465
466 rt2x00usb_free_reg(rt2x00dev);
467
468 return -ENOMEM;
469}
470
471int rt2x00usb_probe(struct usb_interface *usb_intf,
472 const struct usb_device_id *id)
473{
474 struct usb_device *usb_dev = interface_to_usbdev(usb_intf);
475 struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_info;
476 struct ieee80211_hw *hw;
477 struct rt2x00_dev *rt2x00dev;
478 int retval;
479
480 usb_dev = usb_get_dev(usb_dev);
481
482 hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
483 if (!hw) {
484 ERROR_PROBE("Failed to allocate hardware.\n");
485 retval = -ENOMEM;
486 goto exit_put_device;
487 }
488
489 usb_set_intfdata(usb_intf, hw);
490
491 rt2x00dev = hw->priv;
492 rt2x00dev->dev = usb_intf;
493 rt2x00dev->ops = ops;
494 rt2x00dev->hw = hw;
495
496 retval = rt2x00usb_alloc_reg(rt2x00dev);
497 if (retval)
498 goto exit_free_device;
499
500 retval = rt2x00lib_probe_dev(rt2x00dev);
501 if (retval)
502 goto exit_free_reg;
503
504 return 0;
505
506exit_free_reg:
507 rt2x00usb_free_reg(rt2x00dev);
508
509exit_free_device:
510 ieee80211_free_hw(hw);
511
512exit_put_device:
513 usb_put_dev(usb_dev);
514
515 usb_set_intfdata(usb_intf, NULL);
516
517 return retval;
518}
519EXPORT_SYMBOL_GPL(rt2x00usb_probe);
520
521void rt2x00usb_disconnect(struct usb_interface *usb_intf)
522{
523 struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
524 struct rt2x00_dev *rt2x00dev = hw->priv;
525
526 /*
527 * Free all allocated data.
528 */
529 rt2x00lib_remove_dev(rt2x00dev);
530 rt2x00usb_free_reg(rt2x00dev);
531 ieee80211_free_hw(hw);
532
533 /*
534 * Free the USB device data.
535 */
536 usb_set_intfdata(usb_intf, NULL);
537 usb_put_dev(interface_to_usbdev(usb_intf));
538}
539EXPORT_SYMBOL_GPL(rt2x00usb_disconnect);
540
541#ifdef CONFIG_PM
542int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state)
543{
544 struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
545 struct rt2x00_dev *rt2x00dev = hw->priv;
546 int retval;
547
548 retval = rt2x00lib_suspend(rt2x00dev, state);
549 if (retval)
550 return retval;
551
552 rt2x00usb_free_reg(rt2x00dev);
553
554 /*
555 * Decrease usbdev refcount.
556 */
557 usb_put_dev(interface_to_usbdev(usb_intf));
558
559 return 0;
560}
561EXPORT_SYMBOL_GPL(rt2x00usb_suspend);
562
563int rt2x00usb_resume(struct usb_interface *usb_intf)
564{
565 struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
566 struct rt2x00_dev *rt2x00dev = hw->priv;
567 int retval;
568
569 usb_get_dev(interface_to_usbdev(usb_intf));
570
571 retval = rt2x00usb_alloc_reg(rt2x00dev);
572 if (retval)
573 return retval;
574
575 retval = rt2x00lib_resume(rt2x00dev);
576 if (retval)
577 goto exit_free_reg;
578
579 return 0;
580
581exit_free_reg:
582 rt2x00usb_free_reg(rt2x00dev);
583
584 return retval;
585}
586EXPORT_SYMBOL_GPL(rt2x00usb_resume);
587#endif /* CONFIG_PM */
588
589/*
590 * rt2x00pci module information.
591 */
592MODULE_AUTHOR(DRV_PROJECT);
593MODULE_VERSION(DRV_VERSION);
594MODULE_DESCRIPTION("rt2x00 library");
595MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
new file mode 100644
index 000000000000..d4113e5158f0
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -0,0 +1,180 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00usb
23 Abstract: Data structures for the rt2x00usb module.
24 */
25
26#ifndef RT2X00USB_H
27#define RT2X00USB_H
28
29/*
30 * This variable should be used with the
31 * usb_driver structure initialization.
32 */
33#define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops)
34
35/*
36 * Register defines.
37 * Some registers require multiple attempts before success,
38 * in those cases REGISTER_BUSY_COUNT attempts should be
39 * taken with a REGISTER_BUSY_DELAY interval.
40 * For USB vendor requests we need to pass a timeout
41 * time in ms, for this we use the REGISTER_TIMEOUT,
42 * however when loading firmware a higher value is
43 * required. In that case we use the REGISTER_TIMEOUT_FIRMWARE.
44 */
45#define REGISTER_BUSY_COUNT 5
46#define REGISTER_BUSY_DELAY 100
47#define REGISTER_TIMEOUT 20
48#define REGISTER_TIMEOUT_FIRMWARE 1000
49
50/*
51 * Cache size
52 */
53#define CSR_CACHE_SIZE 8
54#define CSR_CACHE_SIZE_FIRMWARE 64
55
56/*
57 * USB request types.
58 */
59#define USB_VENDOR_REQUEST ( USB_TYPE_VENDOR | USB_RECIP_DEVICE )
60#define USB_VENDOR_REQUEST_IN ( USB_DIR_IN | USB_VENDOR_REQUEST )
61#define USB_VENDOR_REQUEST_OUT ( USB_DIR_OUT | USB_VENDOR_REQUEST )
62
63/*
64 * USB vendor commands.
65 */
66#define USB_DEVICE_MODE 0x01
67#define USB_SINGLE_WRITE 0x02
68#define USB_SINGLE_READ 0x03
69#define USB_MULTI_WRITE 0x06
70#define USB_MULTI_READ 0x07
71#define USB_EEPROM_WRITE 0x08
72#define USB_EEPROM_READ 0x09
73#define USB_LED_CONTROL 0x0a /* RT73USB */
74#define USB_RX_CONTROL 0x0c
75
76/*
77 * Device modes offset
78 */
79#define USB_MODE_RESET 0x01
80#define USB_MODE_UNPLUG 0x02
81#define USB_MODE_FUNCTION 0x03
82#define USB_MODE_TEST 0x04
83#define USB_MODE_SLEEP 0x07 /* RT73USB */
84#define USB_MODE_FIRMWARE 0x08 /* RT73USB */
85#define USB_MODE_WAKEUP 0x09 /* RT73USB */
86
87/*
88 * Used to read/write from/to the device.
89 * This is the main function to communicate with the device,
90 * the buffer argument _must_ either be NULL or point to
91 * a buffer allocated by kmalloc. Failure to do so can lead
92 * to unexpected behavior depending on the architecture.
93 */
94int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev,
95 const u8 request, const u8 requesttype,
96 const u16 offset, const u16 value,
97 void *buffer, const u16 buffer_length,
98 u16 timeout);
99
100/*
101 * Used to read/write from/to the device.
102 * This function will use a previously with kmalloc allocated cache
103 * to communicate with the device. The contents of the buffer pointer
104 * will be copied to this cache when writing, or read from the cache
105 * when reading.
106 * Buffers send to rt2x00usb_vendor_request _must_ be allocated with
107 * kmalloc. Hence the reason for using a previously allocated cache
108 * which has been allocated properly.
109 */
110int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev,
111 const u8 request, const u8 requesttype,
112 const u16 offset, void *buffer,
113 const u16 buffer_length, u16 timeout);
114
115/*
116 * Simple wrapper around rt2x00usb_vendor_request to write a single
117 * command to the device. Since we don't use the buffer argument we
118 * don't have to worry about kmalloc here.
119 */
120static inline int rt2x00usb_vendor_request_sw(const struct rt2x00_dev
121 *rt2x00dev,
122 const u8 request,
123 const u16 offset,
124 const u16 value,
125 int timeout)
126{
127 return rt2x00usb_vendor_request(rt2x00dev, request,
128 USB_VENDOR_REQUEST_OUT, offset,
129 value, NULL, 0, timeout);
130}
131
132/*
133 * Simple wrapper around rt2x00usb_vendor_request to read the eeprom
134 * from the device. Note that the eeprom argument _must_ be allocated using
135 * kmalloc for correct handling inside the kernel USB layer.
136 */
137static inline int rt2x00usb_eeprom_read(const struct rt2x00_dev *rt2x00dev,
138 __le16 *eeprom, const u16 lenght)
139{
140 int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16));
141
142 return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ,
143 USB_VENDOR_REQUEST_IN, 0x0000,
144 0x0000, eeprom, lenght, timeout);
145}
146
147/*
148 * Radio handlers
149 */
150void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev);
151void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev);
152
153/*
154 * TX data handlers.
155 */
156int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev,
157 struct data_ring *ring, struct sk_buff *skb,
158 struct ieee80211_tx_control *control);
159
160/*
161 * Device initialization handlers.
162 */
163int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev);
164void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev);
165
166/*
167 * USB driver handlers.
168 */
169int rt2x00usb_probe(struct usb_interface *usb_intf,
170 const struct usb_device_id *id);
171void rt2x00usb_disconnect(struct usb_interface *usb_intf);
172#ifdef CONFIG_PM
173int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state);
174int rt2x00usb_resume(struct usb_interface *usb_intf);
175#else
176#define rt2x00usb_suspend NULL
177#define rt2x00usb_resume NULL
178#endif /* CONFIG_PM */
179
180#endif /* RT2X00USB_H */
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
new file mode 100644
index 000000000000..730bed5a1984
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -0,0 +1,2603 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt61pci
23 Abstract: rt61pci device specific routines.
24 Supported chipsets: RT2561, RT2561s, RT2661.
25 */
26
27/*
28 * Set enviroment defines for rt2x00.h
29 */
30#define DRV_NAME "rt61pci"
31
32#include <linux/delay.h>
33#include <linux/etherdevice.h>
34#include <linux/init.h>
35#include <linux/kernel.h>
36#include <linux/module.h>
37#include <linux/pci.h>
38#include <linux/eeprom_93cx6.h>
39
40#include "rt2x00.h"
41#include "rt2x00pci.h"
42#include "rt61pci.h"
43
44/*
45 * Register access.
46 * BBP and RF register require indirect register access,
47 * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this.
48 * These indirect registers work with busy bits,
49 * and we will try maximal REGISTER_BUSY_COUNT times to access
50 * the register while taking a REGISTER_BUSY_DELAY us delay
51 * between each attampt. When the busy bit is still set at that time,
52 * the access attempt is considered to have failed,
53 * and we will print an error.
54 */
55static u32 rt61pci_bbp_check(const struct rt2x00_dev *rt2x00dev)
56{
57 u32 reg;
58 unsigned int i;
59
60 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
61 rt2x00pci_register_read(rt2x00dev, PHY_CSR3, &reg);
62 if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY))
63 break;
64 udelay(REGISTER_BUSY_DELAY);
65 }
66
67 return reg;
68}
69
70static void rt61pci_bbp_write(const struct rt2x00_dev *rt2x00dev,
71 const unsigned int word, const u8 value)
72{
73 u32 reg;
74
75 /*
76 * Wait until the BBP becomes ready.
77 */
78 reg = rt61pci_bbp_check(rt2x00dev);
79 if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
80 ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
81 return;
82 }
83
84 /*
85 * Write the data into the BBP.
86 */
87 reg = 0;
88 rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
89 rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
90 rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
91 rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 0);
92
93 rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg);
94}
95
96static void rt61pci_bbp_read(const struct rt2x00_dev *rt2x00dev,
97 const unsigned int word, u8 *value)
98{
99 u32 reg;
100
101 /*
102 * Wait until the BBP becomes ready.
103 */
104 reg = rt61pci_bbp_check(rt2x00dev);
105 if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
106 ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
107 return;
108 }
109
110 /*
111 * Write the request into the BBP.
112 */
113 reg = 0;
114 rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
115 rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
116 rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 1);
117
118 rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg);
119
120 /*
121 * Wait until the BBP becomes ready.
122 */
123 reg = rt61pci_bbp_check(rt2x00dev);
124 if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
125 ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
126 *value = 0xff;
127 return;
128 }
129
130 *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
131}
132
133static void rt61pci_rf_write(const struct rt2x00_dev *rt2x00dev,
134 const unsigned int word, const u32 value)
135{
136 u32 reg;
137 unsigned int i;
138
139 if (!word)
140 return;
141
142 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
143 rt2x00pci_register_read(rt2x00dev, PHY_CSR4, &reg);
144 if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY))
145 goto rf_write;
146 udelay(REGISTER_BUSY_DELAY);
147 }
148
149 ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n");
150 return;
151
152rf_write:
153 reg = 0;
154 rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
155 rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS, 21);
156 rt2x00_set_field32(&reg, PHY_CSR4_IF_SELECT, 0);
157 rt2x00_set_field32(&reg, PHY_CSR4_BUSY, 1);
158
159 rt2x00pci_register_write(rt2x00dev, PHY_CSR4, reg);
160 rt2x00_rf_write(rt2x00dev, word, value);
161}
162
163static void rt61pci_mcu_request(const struct rt2x00_dev *rt2x00dev,
164 const u8 command, const u8 token,
165 const u8 arg0, const u8 arg1)
166{
167 u32 reg;
168
169 rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CSR, &reg);
170
171 if (rt2x00_get_field32(reg, H2M_MAILBOX_CSR_OWNER)) {
172 ERROR(rt2x00dev, "mcu request error. "
173 "Request 0x%02x failed for token 0x%02x.\n",
174 command, token);
175 return;
176 }
177
178 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
179 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
180 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
181 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
182 rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);
183
184 rt2x00pci_register_read(rt2x00dev, HOST_CMD_CSR, &reg);
185 rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
186 rt2x00_set_field32(&reg, HOST_CMD_CSR_INTERRUPT_MCU, 1);
187 rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
188}
189
190static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
191{
192 struct rt2x00_dev *rt2x00dev = eeprom->data;
193 u32 reg;
194
195 rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
196
197 eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN);
198 eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT);
199 eeprom->reg_data_clock =
200 !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK);
201 eeprom->reg_chip_select =
202 !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT);
203}
204
205static void rt61pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
206{
207 struct rt2x00_dev *rt2x00dev = eeprom->data;
208 u32 reg = 0;
209
210 rt2x00_set_field32(&reg, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in);
211 rt2x00_set_field32(&reg, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out);
212 rt2x00_set_field32(&reg, E2PROM_CSR_DATA_CLOCK,
213 !!eeprom->reg_data_clock);
214 rt2x00_set_field32(&reg, E2PROM_CSR_CHIP_SELECT,
215 !!eeprom->reg_chip_select);
216
217 rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
218}
219
220#ifdef CONFIG_RT2X00_LIB_DEBUGFS
221#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
222
223static void rt61pci_read_csr(const struct rt2x00_dev *rt2x00dev,
224 const unsigned int word, u32 *data)
225{
226 rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data);
227}
228
229static void rt61pci_write_csr(const struct rt2x00_dev *rt2x00dev,
230 const unsigned int word, u32 data)
231{
232 rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data);
233}
234
235static const struct rt2x00debug rt61pci_rt2x00debug = {
236 .owner = THIS_MODULE,
237 .csr = {
238 .read = rt61pci_read_csr,
239 .write = rt61pci_write_csr,
240 .word_size = sizeof(u32),
241 .word_count = CSR_REG_SIZE / sizeof(u32),
242 },
243 .eeprom = {
244 .read = rt2x00_eeprom_read,
245 .write = rt2x00_eeprom_write,
246 .word_size = sizeof(u16),
247 .word_count = EEPROM_SIZE / sizeof(u16),
248 },
249 .bbp = {
250 .read = rt61pci_bbp_read,
251 .write = rt61pci_bbp_write,
252 .word_size = sizeof(u8),
253 .word_count = BBP_SIZE / sizeof(u8),
254 },
255 .rf = {
256 .read = rt2x00_rf_read,
257 .write = rt61pci_rf_write,
258 .word_size = sizeof(u32),
259 .word_count = RF_SIZE / sizeof(u32),
260 },
261};
262#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
263
264#ifdef CONFIG_RT61PCI_RFKILL
265static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
266{
267 u32 reg;
268
269 rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
270 return rt2x00_get_field32(reg, MAC_CSR13_BIT5);;
271}
272#endif /* CONFIG_RT2400PCI_RFKILL */
273
274/*
275 * Configuration handlers.
276 */
277static void rt61pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr)
278{
279 __le32 reg[2];
280 u32 tmp;
281
282 memset(&reg, 0, sizeof(reg));
283 memcpy(&reg, addr, ETH_ALEN);
284
285 tmp = le32_to_cpu(reg[1]);
286 rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
287 reg[1] = cpu_to_le32(tmp);
288
289 /*
290 * The MAC address is passed to us as an array of bytes,
291 * that array is little endian, so no need for byte ordering.
292 */
293 rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, &reg, sizeof(reg));
294}
295
296static void rt61pci_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
297{
298 __le32 reg[2];
299 u32 tmp;
300
301 memset(&reg, 0, sizeof(reg));
302 memcpy(&reg, bssid, ETH_ALEN);
303
304 tmp = le32_to_cpu(reg[1]);
305 rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3);
306 reg[1] = cpu_to_le32(tmp);
307
308 /*
309 * The BSSID is passed to us as an array of bytes,
310 * that array is little endian, so no need for byte ordering.
311 */
312 rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, &reg, sizeof(reg));
313}
314
315static void rt61pci_config_packet_filter(struct rt2x00_dev *rt2x00dev,
316 const unsigned int filter)
317{
318 int promisc = !!(filter & IFF_PROMISC);
319 int multicast = !!(filter & IFF_MULTICAST);
320 int broadcast = !!(filter & IFF_BROADCAST);
321 u32 reg;
322
323 rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
324 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME, !promisc);
325 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST, !multicast);
326 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BORADCAST, !broadcast);
327 rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
328}
329
330static void rt61pci_config_type(struct rt2x00_dev *rt2x00dev, const int type)
331{
332 u32 reg;
333
334 /*
335 * Clear current synchronisation setup.
336 * For the Beacon base registers we only need to clear
337 * the first byte since that byte contains the VALID and OWNER
338 * bits which (when set to 0) will invalidate the entire beacon.
339 */
340 rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0);
341 rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
342 rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
343 rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
344 rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
345
346 /*
347 * Apply hardware packet filter.
348 */
349 rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
350
351 if (!is_monitor_present(&rt2x00dev->interface) &&
352 (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
353 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS, 1);
354 else
355 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS, 0);
356
357 /*
358 * If there is a non-monitor interface present
359 * the packet should be strict (even if a monitor interface is present!).
360 * When there is only 1 interface present which is in monitor mode
361 * we should start accepting _all_ frames.
362 */
363 if (is_interface_present(&rt2x00dev->interface)) {
364 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC, 1);
365 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL, 1);
366 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL, 1);
367 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
368 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS, 1);
369 } else if (is_monitor_present(&rt2x00dev->interface)) {
370 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC, 0);
371 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL, 0);
372 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL, 0);
373 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 0);
374 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS, 0);
375 }
376
377 rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
378
379 /*
380 * Enable synchronisation.
381 */
382 rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
383 if (is_interface_present(&rt2x00dev->interface)) {
384 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
385 rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
386 }
387
388 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
389 if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
390 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 2);
391 else if (type == IEEE80211_IF_TYPE_STA)
392 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 1);
393 else if (is_monitor_present(&rt2x00dev->interface) &&
394 !is_interface_present(&rt2x00dev->interface))
395 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 0);
396
397 rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
398}
399
400static void rt61pci_config_rate(struct rt2x00_dev *rt2x00dev, const int rate)
401{
402 struct ieee80211_conf *conf = &rt2x00dev->hw->conf;
403 u32 reg;
404 u32 value;
405 u32 preamble;
406
407 if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE))
408 preamble = SHORT_PREAMBLE;
409 else
410 preamble = PREAMBLE;
411
412 /*
413 * Extract the allowed ratemask from the device specific rate value,
414 * We need to set TXRX_CSR5 to the basic rate mask so we need to mask
415 * off the non-basic rates.
416 */
417 reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK;
418
419 rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, reg);
420
421 rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
422 value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ?
423 SHORT_DIFS : DIFS) +
424 PLCP + preamble + get_duration(ACK_SIZE, 10);
425 rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, value);
426 rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
427
428 rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
429 if (preamble == SHORT_PREAMBLE)
430 rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE, 1);
431 else
432 rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE, 0);
433 rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
434}
435
436static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev,
437 const int phymode)
438{
439 struct ieee80211_hw_mode *mode;
440 struct ieee80211_rate *rate;
441
442 if (phymode == MODE_IEEE80211A)
443 rt2x00dev->curr_hwmode = HWMODE_A;
444 else if (phymode == MODE_IEEE80211B)
445 rt2x00dev->curr_hwmode = HWMODE_B;
446 else
447 rt2x00dev->curr_hwmode = HWMODE_G;
448
449 mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
450 rate = &mode->rates[mode->num_rates - 1];
451
452 rt61pci_config_rate(rt2x00dev, rate->val2);
453}
454
455static void rt61pci_config_lock_channel(struct rt2x00_dev *rt2x00dev,
456 struct rf_channel *rf,
457 const int txpower)
458{
459 u8 r3;
460 u8 r94;
461 u8 smart;
462
463 rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
464 rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
465
466 smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
467 rt2x00_rf(&rt2x00dev->chip, RF2527));
468
469 rt61pci_bbp_read(rt2x00dev, 3, &r3);
470 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
471 rt61pci_bbp_write(rt2x00dev, 3, r3);
472
473 r94 = 6;
474 if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94))
475 r94 += txpower - MAX_TXPOWER;
476 else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94))
477 r94 += txpower;
478 rt61pci_bbp_write(rt2x00dev, 94, r94);
479
480 rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
481 rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
482 rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
483 rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
484
485 udelay(200);
486
487 rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
488 rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
489 rt61pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
490 rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
491
492 udelay(200);
493
494 rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
495 rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
496 rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
497 rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
498
499 msleep(1);
500}
501
502static void rt61pci_config_channel(struct rt2x00_dev *rt2x00dev,
503 const int index, const int channel,
504 const int txpower)
505{
506 struct rf_channel rf;
507
508 /*
509 * Fill rf_reg structure.
510 */
511 memcpy(&rf, &rt2x00dev->spec.channels[index], sizeof(rf));
512
513 rt61pci_config_lock_channel(rt2x00dev, &rf, txpower);
514}
515
516static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev,
517 const int txpower)
518{
519 struct rf_channel rf;
520
521 rt2x00_rf_read(rt2x00dev, 1, &rf.rf1);
522 rt2x00_rf_read(rt2x00dev, 2, &rf.rf2);
523 rt2x00_rf_read(rt2x00dev, 3, &rf.rf3);
524 rt2x00_rf_read(rt2x00dev, 4, &rf.rf4);
525
526 rt61pci_config_lock_channel(rt2x00dev, &rf, txpower);
527}
528
529static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
530 const int antenna_tx,
531 const int antenna_rx)
532{
533 u8 r3;
534 u8 r4;
535 u8 r77;
536
537 rt61pci_bbp_read(rt2x00dev, 3, &r3);
538 rt61pci_bbp_read(rt2x00dev, 4, &r4);
539 rt61pci_bbp_read(rt2x00dev, 77, &r77);
540
541 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE,
542 !rt2x00_rf(&rt2x00dev->chip, RF5225));
543
544 switch (antenna_rx) {
545 case ANTENNA_SW_DIVERSITY:
546 case ANTENNA_HW_DIVERSITY:
547 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
548 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
549 !!(rt2x00dev->curr_hwmode != HWMODE_A));
550 break;
551 case ANTENNA_A:
552 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
553 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
554
555 if (rt2x00dev->curr_hwmode == HWMODE_A)
556 rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
557 else
558 rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
559 break;
560 case ANTENNA_B:
561 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
562 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
563
564 if (rt2x00dev->curr_hwmode == HWMODE_A)
565 rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
566 else
567 rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
568 break;
569 }
570
571 rt61pci_bbp_write(rt2x00dev, 77, r77);
572 rt61pci_bbp_write(rt2x00dev, 3, r3);
573 rt61pci_bbp_write(rt2x00dev, 4, r4);
574}
575
576static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
577 const int antenna_tx,
578 const int antenna_rx)
579{
580 u8 r3;
581 u8 r4;
582 u8 r77;
583
584 rt61pci_bbp_read(rt2x00dev, 3, &r3);
585 rt61pci_bbp_read(rt2x00dev, 4, &r4);
586 rt61pci_bbp_read(rt2x00dev, 77, &r77);
587
588 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE,
589 !rt2x00_rf(&rt2x00dev->chip, RF2527));
590 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
591 !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
592
593 switch (antenna_rx) {
594 case ANTENNA_SW_DIVERSITY:
595 case ANTENNA_HW_DIVERSITY:
596 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
597 break;
598 case ANTENNA_A:
599 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
600 rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
601 break;
602 case ANTENNA_B:
603 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
604 rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
605 break;
606 }
607
608 rt61pci_bbp_write(rt2x00dev, 77, r77);
609 rt61pci_bbp_write(rt2x00dev, 3, r3);
610 rt61pci_bbp_write(rt2x00dev, 4, r4);
611}
612
613static void rt61pci_config_antenna_2529_rx(struct rt2x00_dev *rt2x00dev,
614 const int p1, const int p2)
615{
616 u32 reg;
617
618 rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
619
620 if (p1 != 0xff) {
621 rt2x00_set_field32(&reg, MAC_CSR13_BIT4, !!p1);
622 rt2x00_set_field32(&reg, MAC_CSR13_BIT12, 0);
623 rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
624 }
625 if (p2 != 0xff) {
626 rt2x00_set_field32(&reg, MAC_CSR13_BIT3, !p2);
627 rt2x00_set_field32(&reg, MAC_CSR13_BIT11, 0);
628 rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
629 }
630}
631
632static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev,
633 const int antenna_tx,
634 const int antenna_rx)
635{
636 u16 eeprom;
637 u8 r3;
638 u8 r4;
639 u8 r77;
640
641 rt61pci_bbp_read(rt2x00dev, 3, &r3);
642 rt61pci_bbp_read(rt2x00dev, 4, &r4);
643 rt61pci_bbp_read(rt2x00dev, 77, &r77);
644 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
645
646 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
647
648 if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) &&
649 rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) {
650 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
651 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 1);
652 rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1);
653 } else if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY)) {
654 if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED) >= 2) {
655 rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
656 rt61pci_bbp_write(rt2x00dev, 77, r77);
657 }
658 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
659 rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1);
660 } else if (!rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) &&
661 rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) {
662 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
663 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
664
665 switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) {
666 case 0:
667 rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1);
668 break;
669 case 1:
670 rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 0);
671 break;
672 case 2:
673 rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0);
674 break;
675 case 3:
676 rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1);
677 break;
678 }
679 } else if (!rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) &&
680 !rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) {
681 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
682 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
683
684 switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) {
685 case 0:
686 rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
687 rt61pci_bbp_write(rt2x00dev, 77, r77);
688 rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1);
689 break;
690 case 1:
691 rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
692 rt61pci_bbp_write(rt2x00dev, 77, r77);
693 rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 0);
694 break;
695 case 2:
696 rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
697 rt61pci_bbp_write(rt2x00dev, 77, r77);
698 rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0);
699 break;
700 case 3:
701 rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
702 rt61pci_bbp_write(rt2x00dev, 77, r77);
703 rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1);
704 break;
705 }
706 }
707
708 rt61pci_bbp_write(rt2x00dev, 3, r3);
709 rt61pci_bbp_write(rt2x00dev, 4, r4);
710}
711
712struct antenna_sel {
713 u8 word;
714 /*
715 * value[0] -> non-LNA
716 * value[1] -> LNA
717 */
718 u8 value[2];
719};
720
721static const struct antenna_sel antenna_sel_a[] = {
722 { 96, { 0x58, 0x78 } },
723 { 104, { 0x38, 0x48 } },
724 { 75, { 0xfe, 0x80 } },
725 { 86, { 0xfe, 0x80 } },
726 { 88, { 0xfe, 0x80 } },
727 { 35, { 0x60, 0x60 } },
728 { 97, { 0x58, 0x58 } },
729 { 98, { 0x58, 0x58 } },
730};
731
732static const struct antenna_sel antenna_sel_bg[] = {
733 { 96, { 0x48, 0x68 } },
734 { 104, { 0x2c, 0x3c } },
735 { 75, { 0xfe, 0x80 } },
736 { 86, { 0xfe, 0x80 } },
737 { 88, { 0xfe, 0x80 } },
738 { 35, { 0x50, 0x50 } },
739 { 97, { 0x48, 0x48 } },
740 { 98, { 0x48, 0x48 } },
741};
742
743static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev,
744 const int antenna_tx, const int antenna_rx)
745{
746 const struct antenna_sel *sel;
747 unsigned int lna;
748 unsigned int i;
749 u32 reg;
750
751 rt2x00pci_register_read(rt2x00dev, PHY_CSR0, &reg);
752
753 if (rt2x00dev->curr_hwmode == HWMODE_A) {
754 sel = antenna_sel_a;
755 lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
756
757 rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG, 0);
758 rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A, 1);
759 } else {
760 sel = antenna_sel_bg;
761 lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
762
763 rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG, 1);
764 rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A, 0);
765 }
766
767 for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
768 rt61pci_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
769
770 rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg);
771
772 if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
773 rt2x00_rf(&rt2x00dev->chip, RF5325))
774 rt61pci_config_antenna_5x(rt2x00dev, antenna_tx, antenna_rx);
775 else if (rt2x00_rf(&rt2x00dev->chip, RF2527))
776 rt61pci_config_antenna_2x(rt2x00dev, antenna_tx, antenna_rx);
777 else if (rt2x00_rf(&rt2x00dev->chip, RF2529)) {
778 if (test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags))
779 rt61pci_config_antenna_2x(rt2x00dev, antenna_tx,
780 antenna_rx);
781 else
782 rt61pci_config_antenna_2529(rt2x00dev, antenna_tx,
783 antenna_rx);
784 }
785}
786
787static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev,
788 const int short_slot_time,
789 const int beacon_int)
790{
791 u32 reg;
792
793 rt2x00pci_register_read(rt2x00dev, MAC_CSR9, &reg);
794 rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME,
795 short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME);
796 rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg);
797
798 rt2x00pci_register_read(rt2x00dev, MAC_CSR8, &reg);
799 rt2x00_set_field32(&reg, MAC_CSR8_SIFS, SIFS);
800 rt2x00_set_field32(&reg, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3);
801 rt2x00_set_field32(&reg, MAC_CSR8_EIFS, EIFS);
802 rt2x00pci_register_write(rt2x00dev, MAC_CSR8, reg);
803
804 rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
805 rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
806 rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
807
808 rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
809 rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
810 rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
811
812 rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
813 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL, beacon_int * 16);
814 rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
815}
816
817static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
818 const unsigned int flags,
819 struct ieee80211_conf *conf)
820{
821 int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME;
822
823 if (flags & CONFIG_UPDATE_PHYMODE)
824 rt61pci_config_phymode(rt2x00dev, conf->phymode);
825 if (flags & CONFIG_UPDATE_CHANNEL)
826 rt61pci_config_channel(rt2x00dev, conf->channel_val,
827 conf->channel, conf->power_level);
828 if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
829 rt61pci_config_txpower(rt2x00dev, conf->power_level);
830 if (flags & CONFIG_UPDATE_ANTENNA)
831 rt61pci_config_antenna(rt2x00dev, conf->antenna_sel_tx,
832 conf->antenna_sel_rx);
833 if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
834 rt61pci_config_duration(rt2x00dev, short_slot_time,
835 conf->beacon_int);
836}
837
838/*
839 * LED functions.
840 */
841static void rt61pci_enable_led(struct rt2x00_dev *rt2x00dev)
842{
843 u32 reg;
844 u16 led_reg;
845 u8 arg0;
846 u8 arg1;
847
848 rt2x00pci_register_read(rt2x00dev, MAC_CSR14, &reg);
849 rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, 70);
850 rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, 30);
851 rt2x00pci_register_write(rt2x00dev, MAC_CSR14, reg);
852
853 led_reg = rt2x00dev->led_reg;
854 rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 1);
855 if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A)
856 rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 1);
857 else
858 rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 1);
859
860 arg0 = led_reg & 0xff;
861 arg1 = (led_reg >> 8) & 0xff;
862
863 rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1);
864}
865
866static void rt61pci_disable_led(struct rt2x00_dev *rt2x00dev)
867{
868 u16 led_reg;
869 u8 arg0;
870 u8 arg1;
871
872 led_reg = rt2x00dev->led_reg;
873 rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 0);
874 rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 0);
875 rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 0);
876
877 arg0 = led_reg & 0xff;
878 arg1 = (led_reg >> 8) & 0xff;
879
880 rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1);
881}
882
883static void rt61pci_activity_led(struct rt2x00_dev *rt2x00dev, int rssi)
884{
885 u8 led;
886
887 if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH)
888 return;
889
890 /*
891 * Led handling requires a positive value for the rssi,
892 * to do that correctly we need to add the correction.
893 */
894 rssi += rt2x00dev->rssi_offset;
895
896 if (rssi <= 30)
897 led = 0;
898 else if (rssi <= 39)
899 led = 1;
900 else if (rssi <= 49)
901 led = 2;
902 else if (rssi <= 53)
903 led = 3;
904 else if (rssi <= 63)
905 led = 4;
906 else
907 led = 5;
908
909 rt61pci_mcu_request(rt2x00dev, MCU_LED_STRENGTH, 0xff, led, 0);
910}
911
912/*
913 * Link tuning
914 */
915static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev)
916{
917 u32 reg;
918
919 /*
920 * Update FCS error count from register.
921 */
922 rt2x00pci_register_read(rt2x00dev, STA_CSR0, &reg);
923 rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR);
924
925 /*
926 * Update False CCA count from register.
927 */
928 rt2x00pci_register_read(rt2x00dev, STA_CSR1, &reg);
929 rt2x00dev->link.false_cca =
930 rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
931}
932
933static void rt61pci_reset_tuner(struct rt2x00_dev *rt2x00dev)
934{
935 rt61pci_bbp_write(rt2x00dev, 17, 0x20);
936 rt2x00dev->link.vgc_level = 0x20;
937}
938
939static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev)
940{
941 int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
942 u8 r17;
943 u8 up_bound;
944 u8 low_bound;
945
946 /*
947 * Update Led strength
948 */
949 rt61pci_activity_led(rt2x00dev, rssi);
950
951 rt61pci_bbp_read(rt2x00dev, 17, &r17);
952
953 /*
954 * Determine r17 bounds.
955 */
956 if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
957 low_bound = 0x28;
958 up_bound = 0x48;
959 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
960 low_bound += 0x10;
961 up_bound += 0x10;
962 }
963 } else {
964 low_bound = 0x20;
965 up_bound = 0x40;
966 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
967 low_bound += 0x10;
968 up_bound += 0x10;
969 }
970 }
971
972 /*
973 * Special big-R17 for very short distance
974 */
975 if (rssi >= -35) {
976 if (r17 != 0x60)
977 rt61pci_bbp_write(rt2x00dev, 17, 0x60);
978 return;
979 }
980
981 /*
982 * Special big-R17 for short distance
983 */
984 if (rssi >= -58) {
985 if (r17 != up_bound)
986 rt61pci_bbp_write(rt2x00dev, 17, up_bound);
987 return;
988 }
989
990 /*
991 * Special big-R17 for middle-short distance
992 */
993 if (rssi >= -66) {
994 low_bound += 0x10;
995 if (r17 != low_bound)
996 rt61pci_bbp_write(rt2x00dev, 17, low_bound);
997 return;
998 }
999
1000 /*
1001 * Special mid-R17 for middle distance
1002 */
1003 if (rssi >= -74) {
1004 low_bound += 0x08;
1005 if (r17 != low_bound)
1006 rt61pci_bbp_write(rt2x00dev, 17, low_bound);
1007 return;
1008 }
1009
1010 /*
1011 * Special case: Change up_bound based on the rssi.
1012 * Lower up_bound when rssi is weaker then -74 dBm.
1013 */
1014 up_bound -= 2 * (-74 - rssi);
1015 if (low_bound > up_bound)
1016 up_bound = low_bound;
1017
1018 if (r17 > up_bound) {
1019 rt61pci_bbp_write(rt2x00dev, 17, up_bound);
1020 return;
1021 }
1022
1023 /*
1024 * r17 does not yet exceed upper limit, continue and base
1025 * the r17 tuning on the false CCA count.
1026 */
1027 if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) {
1028 if (++r17 > up_bound)
1029 r17 = up_bound;
1030 rt61pci_bbp_write(rt2x00dev, 17, r17);
1031 } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) {
1032 if (--r17 < low_bound)
1033 r17 = low_bound;
1034 rt61pci_bbp_write(rt2x00dev, 17, r17);
1035 }
1036}
1037
1038/*
1039 * Firmware name function.
1040 */
1041static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
1042{
1043 char *fw_name;
1044
1045 switch (rt2x00dev->chip.rt) {
1046 case RT2561:
1047 fw_name = FIRMWARE_RT2561;
1048 break;
1049 case RT2561s:
1050 fw_name = FIRMWARE_RT2561s;
1051 break;
1052 case RT2661:
1053 fw_name = FIRMWARE_RT2661;
1054 break;
1055 default:
1056 fw_name = NULL;
1057 break;
1058 }
1059
1060 return fw_name;
1061}
1062
1063/*
1064 * Initialization functions.
1065 */
1066static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
1067 const size_t len)
1068{
1069 int i;
1070 u32 reg;
1071
1072 /*
1073 * Wait for stable hardware.
1074 */
1075 for (i = 0; i < 100; i++) {
1076 rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
1077 if (reg)
1078 break;
1079 msleep(1);
1080 }
1081
1082 if (!reg) {
1083 ERROR(rt2x00dev, "Unstable hardware.\n");
1084 return -EBUSY;
1085 }
1086
1087 /*
1088 * Prepare MCU and mailbox for firmware loading.
1089 */
1090 reg = 0;
1091 rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 1);
1092 rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
1093 rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);
1094 rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
1095 rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, 0);
1096
1097 /*
1098 * Write firmware to device.
1099 */
1100 reg = 0;
1101 rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 1);
1102 rt2x00_set_field32(&reg, MCU_CNTL_CSR_SELECT_BANK, 1);
1103 rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
1104
1105 rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
1106 data, len);
1107
1108 rt2x00_set_field32(&reg, MCU_CNTL_CSR_SELECT_BANK, 0);
1109 rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
1110
1111 rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 0);
1112 rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
1113
1114 for (i = 0; i < 100; i++) {
1115 rt2x00pci_register_read(rt2x00dev, MCU_CNTL_CSR, &reg);
1116 if (rt2x00_get_field32(reg, MCU_CNTL_CSR_READY))
1117 break;
1118 msleep(1);
1119 }
1120
1121 if (i == 100) {
1122 ERROR(rt2x00dev, "MCU Control register not ready.\n");
1123 return -EBUSY;
1124 }
1125
1126 /*
1127 * Reset MAC and BBP registers.
1128 */
1129 reg = 0;
1130 rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
1131 rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
1132 rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1133
1134 rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1135 rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
1136 rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
1137 rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1138
1139 rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1140 rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
1141 rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1142
1143 return 0;
1144}
1145
1146static void rt61pci_init_rxring(struct rt2x00_dev *rt2x00dev)
1147{
1148 struct data_ring *ring = rt2x00dev->rx;
1149 struct data_desc *rxd;
1150 unsigned int i;
1151 u32 word;
1152
1153 memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
1154
1155 for (i = 0; i < ring->stats.limit; i++) {
1156 rxd = ring->entry[i].priv;
1157
1158 rt2x00_desc_read(rxd, 5, &word);
1159 rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS,
1160 ring->entry[i].data_dma);
1161 rt2x00_desc_write(rxd, 5, word);
1162
1163 rt2x00_desc_read(rxd, 0, &word);
1164 rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
1165 rt2x00_desc_write(rxd, 0, word);
1166 }
1167
1168 rt2x00_ring_index_clear(rt2x00dev->rx);
1169}
1170
1171static void rt61pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue)
1172{
1173 struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue);
1174 struct data_desc *txd;
1175 unsigned int i;
1176 u32 word;
1177
1178 memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring));
1179
1180 for (i = 0; i < ring->stats.limit; i++) {
1181 txd = ring->entry[i].priv;
1182
1183 rt2x00_desc_read(txd, 1, &word);
1184 rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
1185 rt2x00_desc_write(txd, 1, word);
1186
1187 rt2x00_desc_read(txd, 5, &word);
1188 rt2x00_set_field32(&word, TXD_W5_PID_TYPE, queue);
1189 rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, i);
1190 rt2x00_desc_write(txd, 5, word);
1191
1192 rt2x00_desc_read(txd, 6, &word);
1193 rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS,
1194 ring->entry[i].data_dma);
1195 rt2x00_desc_write(txd, 6, word);
1196
1197 rt2x00_desc_read(txd, 0, &word);
1198 rt2x00_set_field32(&word, TXD_W0_VALID, 0);
1199 rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
1200 rt2x00_desc_write(txd, 0, word);
1201 }
1202
1203 rt2x00_ring_index_clear(ring);
1204}
1205
1206static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev)
1207{
1208 u32 reg;
1209
1210 /*
1211 * Initialize rings.
1212 */
1213 rt61pci_init_rxring(rt2x00dev);
1214 rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
1215 rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
1216 rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA2);
1217 rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA3);
1218 rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA4);
1219
1220 /*
1221 * Initialize registers.
1222 */
1223 rt2x00pci_register_read(rt2x00dev, TX_RING_CSR0, &reg);
1224 rt2x00_set_field32(&reg, TX_RING_CSR0_AC0_RING_SIZE,
1225 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit);
1226 rt2x00_set_field32(&reg, TX_RING_CSR0_AC1_RING_SIZE,
1227 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit);
1228 rt2x00_set_field32(&reg, TX_RING_CSR0_AC2_RING_SIZE,
1229 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].stats.limit);
1230 rt2x00_set_field32(&reg, TX_RING_CSR0_AC3_RING_SIZE,
1231 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].stats.limit);
1232 rt2x00pci_register_write(rt2x00dev, TX_RING_CSR0, reg);
1233
1234 rt2x00pci_register_read(rt2x00dev, TX_RING_CSR1, &reg);
1235 rt2x00_set_field32(&reg, TX_RING_CSR1_MGMT_RING_SIZE,
1236 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].stats.limit);
1237 rt2x00_set_field32(&reg, TX_RING_CSR1_TXD_SIZE,
1238 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size /
1239 4);
1240 rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg);
1241
1242 rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, &reg);
1243 rt2x00_set_field32(&reg, AC0_BASE_CSR_RING_REGISTER,
1244 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma);
1245 rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg);
1246
1247 rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, &reg);
1248 rt2x00_set_field32(&reg, AC1_BASE_CSR_RING_REGISTER,
1249 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma);
1250 rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg);
1251
1252 rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, &reg);
1253 rt2x00_set_field32(&reg, AC2_BASE_CSR_RING_REGISTER,
1254 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].data_dma);
1255 rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg);
1256
1257 rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, &reg);
1258 rt2x00_set_field32(&reg, AC3_BASE_CSR_RING_REGISTER,
1259 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].data_dma);
1260 rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg);
1261
1262 rt2x00pci_register_read(rt2x00dev, MGMT_BASE_CSR, &reg);
1263 rt2x00_set_field32(&reg, MGMT_BASE_CSR_RING_REGISTER,
1264 rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].data_dma);
1265 rt2x00pci_register_write(rt2x00dev, MGMT_BASE_CSR, reg);
1266
1267 rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, &reg);
1268 rt2x00_set_field32(&reg, RX_RING_CSR_RING_SIZE,
1269 rt2x00dev->rx->stats.limit);
1270 rt2x00_set_field32(&reg, RX_RING_CSR_RXD_SIZE,
1271 rt2x00dev->rx->desc_size / 4);
1272 rt2x00_set_field32(&reg, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4);
1273 rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg);
1274
1275 rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, &reg);
1276 rt2x00_set_field32(&reg, RX_BASE_CSR_RING_REGISTER,
1277 rt2x00dev->rx->data_dma);
1278 rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg);
1279
1280 rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, &reg);
1281 rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC0, 2);
1282 rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC1, 2);
1283 rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC2, 2);
1284 rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC3, 2);
1285 rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_MGMT, 0);
1286 rt2x00pci_register_write(rt2x00dev, TX_DMA_DST_CSR, reg);
1287
1288 rt2x00pci_register_read(rt2x00dev, LOAD_TX_RING_CSR, &reg);
1289 rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC0, 1);
1290 rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1);
1291 rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1);
1292 rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1);
1293 rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_MGMT, 1);
1294 rt2x00pci_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg);
1295
1296 rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, &reg);
1297 rt2x00_set_field32(&reg, RX_CNTL_CSR_LOAD_RXD, 1);
1298 rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg);
1299
1300 return 0;
1301}
1302
1303static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev)
1304{
1305 u32 reg;
1306
1307 rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
1308 rt2x00_set_field32(&reg, TXRX_CSR0_AUTO_TX_SEQ, 1);
1309 rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
1310 rt2x00_set_field32(&reg, TXRX_CSR0_TX_WITHOUT_WAITING, 0);
1311 rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
1312
1313 rt2x00pci_register_read(rt2x00dev, TXRX_CSR1, &reg);
1314 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */
1315 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0_VALID, 1);
1316 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1, 30); /* Rssi */
1317 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1_VALID, 1);
1318 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */
1319 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2_VALID, 1);
1320 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3, 30); /* Rssi */
1321 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3_VALID, 1);
1322 rt2x00pci_register_write(rt2x00dev, TXRX_CSR1, reg);
1323
1324 /*
1325 * CCK TXD BBP registers
1326 */
1327 rt2x00pci_register_read(rt2x00dev, TXRX_CSR2, &reg);
1328 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0, 13);
1329 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0_VALID, 1);
1330 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1, 12);
1331 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1_VALID, 1);
1332 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2, 11);
1333 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2_VALID, 1);
1334 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3, 10);
1335 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3_VALID, 1);
1336 rt2x00pci_register_write(rt2x00dev, TXRX_CSR2, reg);
1337
1338 /*
1339 * OFDM TXD BBP registers
1340 */
1341 rt2x00pci_register_read(rt2x00dev, TXRX_CSR3, &reg);
1342 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0, 7);
1343 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0_VALID, 1);
1344 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1, 6);
1345 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1_VALID, 1);
1346 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2, 5);
1347 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2_VALID, 1);
1348 rt2x00pci_register_write(rt2x00dev, TXRX_CSR3, reg);
1349
1350 rt2x00pci_register_read(rt2x00dev, TXRX_CSR7, &reg);
1351 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_6MBS, 59);
1352 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_9MBS, 53);
1353 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_12MBS, 49);
1354 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_18MBS, 46);
1355 rt2x00pci_register_write(rt2x00dev, TXRX_CSR7, reg);
1356
1357 rt2x00pci_register_read(rt2x00dev, TXRX_CSR8, &reg);
1358 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_24MBS, 44);
1359 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_36MBS, 42);
1360 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_48MBS, 42);
1361 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
1362 rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg);
1363
1364 rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
1365
1366 rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff);
1367
1368 rt2x00pci_register_read(rt2x00dev, MAC_CSR9, &reg);
1369 rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
1370 rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg);
1371
1372 rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x0000071c);
1373
1374 if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
1375 return -EBUSY;
1376
1377 rt2x00pci_register_write(rt2x00dev, MAC_CSR13, 0x0000e000);
1378
1379 /*
1380 * Invalidate all Shared Keys (SEC_CSR0),
1381 * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
1382 */
1383 rt2x00pci_register_write(rt2x00dev, SEC_CSR0, 0x00000000);
1384 rt2x00pci_register_write(rt2x00dev, SEC_CSR1, 0x00000000);
1385 rt2x00pci_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
1386
1387 rt2x00pci_register_write(rt2x00dev, PHY_CSR1, 0x000023b0);
1388 rt2x00pci_register_write(rt2x00dev, PHY_CSR5, 0x060a100c);
1389 rt2x00pci_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
1390 rt2x00pci_register_write(rt2x00dev, PHY_CSR7, 0x00000a08);
1391
1392 rt2x00pci_register_write(rt2x00dev, PCI_CFG_CSR, 0x28ca4404);
1393
1394 rt2x00pci_register_write(rt2x00dev, TEST_MODE_CSR, 0x00000200);
1395
1396 rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);
1397
1398 rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
1399 rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC0_TX_OP, 0);
1400 rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC1_TX_OP, 0);
1401 rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
1402
1403 rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
1404 rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC2_TX_OP, 192);
1405 rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC3_TX_OP, 48);
1406 rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
1407
1408 /*
1409 * We must clear the error counters.
1410 * These registers are cleared on read,
1411 * so we may pass a useless variable to store the value.
1412 */
1413 rt2x00pci_register_read(rt2x00dev, STA_CSR0, &reg);
1414 rt2x00pci_register_read(rt2x00dev, STA_CSR1, &reg);
1415 rt2x00pci_register_read(rt2x00dev, STA_CSR2, &reg);
1416
1417 /*
1418 * Reset MAC and BBP registers.
1419 */
1420 rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1421 rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
1422 rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
1423 rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1424
1425 rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1426 rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
1427 rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
1428 rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1429
1430 rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1431 rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
1432 rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1433
1434 return 0;
1435}
1436
1437static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev)
1438{
1439 unsigned int i;
1440 u16 eeprom;
1441 u8 reg_id;
1442 u8 value;
1443
1444 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1445 rt61pci_bbp_read(rt2x00dev, 0, &value);
1446 if ((value != 0xff) && (value != 0x00))
1447 goto continue_csr_init;
1448 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
1449 udelay(REGISTER_BUSY_DELAY);
1450 }
1451
1452 ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
1453 return -EACCES;
1454
1455continue_csr_init:
1456 rt61pci_bbp_write(rt2x00dev, 3, 0x00);
1457 rt61pci_bbp_write(rt2x00dev, 15, 0x30);
1458 rt61pci_bbp_write(rt2x00dev, 21, 0xc8);
1459 rt61pci_bbp_write(rt2x00dev, 22, 0x38);
1460 rt61pci_bbp_write(rt2x00dev, 23, 0x06);
1461 rt61pci_bbp_write(rt2x00dev, 24, 0xfe);
1462 rt61pci_bbp_write(rt2x00dev, 25, 0x0a);
1463 rt61pci_bbp_write(rt2x00dev, 26, 0x0d);
1464 rt61pci_bbp_write(rt2x00dev, 34, 0x12);
1465 rt61pci_bbp_write(rt2x00dev, 37, 0x07);
1466 rt61pci_bbp_write(rt2x00dev, 39, 0xf8);
1467 rt61pci_bbp_write(rt2x00dev, 41, 0x60);
1468 rt61pci_bbp_write(rt2x00dev, 53, 0x10);
1469 rt61pci_bbp_write(rt2x00dev, 54, 0x18);
1470 rt61pci_bbp_write(rt2x00dev, 60, 0x10);
1471 rt61pci_bbp_write(rt2x00dev, 61, 0x04);
1472 rt61pci_bbp_write(rt2x00dev, 62, 0x04);
1473 rt61pci_bbp_write(rt2x00dev, 75, 0xfe);
1474 rt61pci_bbp_write(rt2x00dev, 86, 0xfe);
1475 rt61pci_bbp_write(rt2x00dev, 88, 0xfe);
1476 rt61pci_bbp_write(rt2x00dev, 90, 0x0f);
1477 rt61pci_bbp_write(rt2x00dev, 99, 0x00);
1478 rt61pci_bbp_write(rt2x00dev, 102, 0x16);
1479 rt61pci_bbp_write(rt2x00dev, 107, 0x04);
1480
1481 DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
1482 for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1483 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1484
1485 if (eeprom != 0xffff && eeprom != 0x0000) {
1486 reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1487 value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1488 DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
1489 reg_id, value);
1490 rt61pci_bbp_write(rt2x00dev, reg_id, value);
1491 }
1492 }
1493 DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
1494
1495 return 0;
1496}
1497
1498/*
1499 * Device state switch handlers.
1500 */
1501static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
1502 enum dev_state state)
1503{
1504 u32 reg;
1505
1506 rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
1507 rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
1508 state == STATE_RADIO_RX_OFF);
1509 rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
1510}
1511
1512static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
1513 enum dev_state state)
1514{
1515 int mask = (state == STATE_RADIO_IRQ_OFF);
1516 u32 reg;
1517
1518 /*
1519 * When interrupts are being enabled, the interrupt registers
1520 * should clear the register to assure a clean state.
1521 */
1522 if (state == STATE_RADIO_IRQ_ON) {
1523 rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
1524 rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
1525
1526 rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, &reg);
1527 rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg);
1528 }
1529
1530 /*
1531 * Only toggle the interrupts bits we are going to use.
1532 * Non-checked interrupt bits are disabled by default.
1533 */
1534 rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, &reg);
1535 rt2x00_set_field32(&reg, INT_MASK_CSR_TXDONE, mask);
1536 rt2x00_set_field32(&reg, INT_MASK_CSR_RXDONE, mask);
1537 rt2x00_set_field32(&reg, INT_MASK_CSR_ENABLE_MITIGATION, mask);
1538 rt2x00_set_field32(&reg, INT_MASK_CSR_MITIGATION_PERIOD, 0xff);
1539 rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
1540
1541 rt2x00pci_register_read(rt2x00dev, MCU_INT_MASK_CSR, &reg);
1542 rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_0, mask);
1543 rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_1, mask);
1544 rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_2, mask);
1545 rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_3, mask);
1546 rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_4, mask);
1547 rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_5, mask);
1548 rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_6, mask);
1549 rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_7, mask);
1550 rt2x00pci_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg);
1551}
1552
1553static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev)
1554{
1555 u32 reg;
1556
1557 /*
1558 * Initialize all registers.
1559 */
1560 if (rt61pci_init_rings(rt2x00dev) ||
1561 rt61pci_init_registers(rt2x00dev) ||
1562 rt61pci_init_bbp(rt2x00dev)) {
1563 ERROR(rt2x00dev, "Register initialization failed.\n");
1564 return -EIO;
1565 }
1566
1567 /*
1568 * Enable interrupts.
1569 */
1570 rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON);
1571
1572 /*
1573 * Enable RX.
1574 */
1575 rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, &reg);
1576 rt2x00_set_field32(&reg, RX_CNTL_CSR_ENABLE_RX_DMA, 1);
1577 rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg);
1578
1579 /*
1580 * Enable LED
1581 */
1582 rt61pci_enable_led(rt2x00dev);
1583
1584 return 0;
1585}
1586
1587static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev)
1588{
1589 u32 reg;
1590
1591 /*
1592 * Disable LED
1593 */
1594 rt61pci_disable_led(rt2x00dev);
1595
1596 rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
1597
1598 /*
1599 * Disable synchronisation.
1600 */
1601 rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0);
1602
1603 /*
1604 * Cancel RX and TX.
1605 */
1606 rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
1607 rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC0, 1);
1608 rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC1, 1);
1609 rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC2, 1);
1610 rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC3, 1);
1611 rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_MGMT, 1);
1612 rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
1613
1614 /*
1615 * Disable interrupts.
1616 */
1617 rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF);
1618}
1619
1620static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
1621{
1622 u32 reg;
1623 unsigned int i;
1624 char put_to_sleep;
1625 char current_state;
1626
1627 put_to_sleep = (state != STATE_AWAKE);
1628
1629 rt2x00pci_register_read(rt2x00dev, MAC_CSR12, &reg);
1630 rt2x00_set_field32(&reg, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep);
1631 rt2x00_set_field32(&reg, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep);
1632 rt2x00pci_register_write(rt2x00dev, MAC_CSR12, reg);
1633
1634 /*
1635 * Device is not guaranteed to be in the requested state yet.
1636 * We must wait until the register indicates that the
1637 * device has entered the correct state.
1638 */
1639 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1640 rt2x00pci_register_read(rt2x00dev, MAC_CSR12, &reg);
1641 current_state =
1642 rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
1643 if (current_state == !put_to_sleep)
1644 return 0;
1645 msleep(10);
1646 }
1647
1648 NOTICE(rt2x00dev, "Device failed to enter state %d, "
1649 "current device state %d.\n", !put_to_sleep, current_state);
1650
1651 return -EBUSY;
1652}
1653
1654static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
1655 enum dev_state state)
1656{
1657 int retval = 0;
1658
1659 switch (state) {
1660 case STATE_RADIO_ON:
1661 retval = rt61pci_enable_radio(rt2x00dev);
1662 break;
1663 case STATE_RADIO_OFF:
1664 rt61pci_disable_radio(rt2x00dev);
1665 break;
1666 case STATE_RADIO_RX_ON:
1667 case STATE_RADIO_RX_OFF:
1668 rt61pci_toggle_rx(rt2x00dev, state);
1669 break;
1670 case STATE_DEEP_SLEEP:
1671 case STATE_SLEEP:
1672 case STATE_STANDBY:
1673 case STATE_AWAKE:
1674 retval = rt61pci_set_state(rt2x00dev, state);
1675 break;
1676 default:
1677 retval = -ENOTSUPP;
1678 break;
1679 }
1680
1681 return retval;
1682}
1683
1684/*
1685 * TX descriptor initialization
1686 */
1687static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1688 struct data_desc *txd,
1689 struct data_entry_desc *desc,
1690 struct ieee80211_hdr *ieee80211hdr,
1691 unsigned int length,
1692 struct ieee80211_tx_control *control)
1693{
1694 u32 word;
1695
1696 /*
1697 * Start writing the descriptor words.
1698 */
1699 rt2x00_desc_read(txd, 1, &word);
1700 rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue);
1701 rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs);
1702 rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min);
1703 rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max);
1704 rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
1705 rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
1706 rt2x00_desc_write(txd, 1, word);
1707
1708 rt2x00_desc_read(txd, 2, &word);
1709 rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal);
1710 rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service);
1711 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low);
1712 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high);
1713 rt2x00_desc_write(txd, 2, word);
1714
1715 rt2x00_desc_read(txd, 5, &word);
1716 rt2x00_set_field32(&word, TXD_W5_TX_POWER,
1717 TXPOWER_TO_DEV(control->power_level));
1718 rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
1719 rt2x00_desc_write(txd, 5, word);
1720
1721 rt2x00_desc_read(txd, 11, &word);
1722 rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, length);
1723 rt2x00_desc_write(txd, 11, word);
1724
1725 rt2x00_desc_read(txd, 0, &word);
1726 rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
1727 rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1728 rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1729 test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
1730 rt2x00_set_field32(&word, TXD_W0_ACK,
1731 !(control->flags & IEEE80211_TXCTL_NO_ACK));
1732 rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1733 test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
1734 rt2x00_set_field32(&word, TXD_W0_OFDM,
1735 test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags));
1736 rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
1737 rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1738 !!(control->flags &
1739 IEEE80211_TXCTL_LONG_RETRY_LIMIT));
1740 rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
1741 rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length);
1742 rt2x00_set_field32(&word, TXD_W0_BURST,
1743 test_bit(ENTRY_TXD_BURST, &desc->flags));
1744 rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
1745 rt2x00_desc_write(txd, 0, word);
1746}
1747
1748/*
1749 * TX data initialization
1750 */
1751static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1752 unsigned int queue)
1753{
1754 u32 reg;
1755
1756 if (queue == IEEE80211_TX_QUEUE_BEACON) {
1757 /*
1758 * For Wi-Fi faily generated beacons between participating
1759 * stations. Set TBTT phase adaptive adjustment step to 8us.
1760 */
1761 rt2x00pci_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
1762
1763 rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
1764 if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
1765 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
1766 rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
1767 }
1768 return;
1769 }
1770
1771 rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
1772 if (queue == IEEE80211_TX_QUEUE_DATA0)
1773 rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC0, 1);
1774 else if (queue == IEEE80211_TX_QUEUE_DATA1)
1775 rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC1, 1);
1776 else if (queue == IEEE80211_TX_QUEUE_DATA2)
1777 rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC2, 1);
1778 else if (queue == IEEE80211_TX_QUEUE_DATA3)
1779 rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC3, 1);
1780 else if (queue == IEEE80211_TX_QUEUE_DATA4)
1781 rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_MGMT, 1);
1782 rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
1783}
1784
1785/*
1786 * RX control handlers
1787 */
1788static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
1789{
1790 u16 eeprom;
1791 u8 offset;
1792 u8 lna;
1793
1794 lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
1795 switch (lna) {
1796 case 3:
1797 offset = 90;
1798 break;
1799 case 2:
1800 offset = 74;
1801 break;
1802 case 1:
1803 offset = 64;
1804 break;
1805 default:
1806 return 0;
1807 }
1808
1809 if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
1810 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
1811 offset += 14;
1812
1813 if (lna == 3 || lna == 2)
1814 offset += 10;
1815
1816 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
1817 offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
1818 } else {
1819 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
1820 offset += 14;
1821
1822 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
1823 offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
1824 }
1825
1826 return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
1827}
1828
1829static int rt61pci_fill_rxdone(struct data_entry *entry,
1830 int *signal, int *rssi, int *ofdm, int *size)
1831{
1832 struct data_desc *rxd = entry->priv;
1833 u32 word0;
1834 u32 word1;
1835
1836 rt2x00_desc_read(rxd, 0, &word0);
1837 rt2x00_desc_read(rxd, 1, &word1);
1838
1839 if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
1840 rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
1841 return -EINVAL;
1842
1843 /*
1844 * Obtain the status about this packet.
1845 */
1846 *signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1847 *rssi = rt61pci_agc_to_rssi(entry->ring->rt2x00dev, word1);
1848 *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
1849 *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1850
1851 return 0;
1852}
1853
1854/*
1855 * Interrupt functions.
1856 */
1857static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
1858{
1859 struct data_ring *ring;
1860 struct data_entry *entry;
1861 struct data_desc *txd;
1862 u32 word;
1863 u32 reg;
1864 u32 old_reg;
1865 int type;
1866 int index;
1867 int tx_status;
1868 int retry;
1869
1870 /*
1871 * During each loop we will compare the freshly read
1872 * STA_CSR4 register value with the value read from
1873 * the previous loop. If the 2 values are equal then
1874 * we should stop processing because the chance it
1875 * quite big that the device has been unplugged and
1876 * we risk going into an endless loop.
1877 */
1878 old_reg = 0;
1879
1880 while (1) {
1881 rt2x00pci_register_read(rt2x00dev, STA_CSR4, &reg);
1882 if (!rt2x00_get_field32(reg, STA_CSR4_VALID))
1883 break;
1884
1885 if (old_reg == reg)
1886 break;
1887 old_reg = reg;
1888
1889 /*
1890 * Skip this entry when it contains an invalid
1891 * ring identication number.
1892 */
1893 type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE);
1894 ring = rt2x00lib_get_ring(rt2x00dev, type);
1895 if (unlikely(!ring))
1896 continue;
1897
1898 /*
1899 * Skip this entry when it contains an invalid
1900 * index number.
1901 */
1902 index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE);
1903 if (unlikely(index >= ring->stats.limit))
1904 continue;
1905
1906 entry = &ring->entry[index];
1907 txd = entry->priv;
1908 rt2x00_desc_read(txd, 0, &word);
1909
1910 if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
1911 !rt2x00_get_field32(word, TXD_W0_VALID))
1912 return;
1913
1914 /*
1915 * Obtain the status about this packet.
1916 */
1917 tx_status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT);
1918 retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);
1919
1920 rt2x00lib_txdone(entry, tx_status, retry);
1921
1922 /*
1923 * Make this entry available for reuse.
1924 */
1925 entry->flags = 0;
1926 rt2x00_set_field32(&word, TXD_W0_VALID, 0);
1927 rt2x00_desc_write(txd, 0, word);
1928 rt2x00_ring_index_done_inc(entry->ring);
1929
1930 /*
1931 * If the data ring was full before the txdone handler
1932 * we must make sure the packet queue in the mac80211 stack
1933 * is reenabled when the txdone handler has finished.
1934 */
1935 if (!rt2x00_ring_full(ring))
1936 ieee80211_wake_queue(rt2x00dev->hw,
1937 entry->tx_status.control.queue);
1938 }
1939}
1940
1941static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
1942{
1943 struct rt2x00_dev *rt2x00dev = dev_instance;
1944 u32 reg_mcu;
1945 u32 reg;
1946
1947 /*
1948 * Get the interrupt sources & saved to local variable.
1949 * Write register value back to clear pending interrupts.
1950 */
1951 rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, &reg_mcu);
1952 rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu);
1953
1954 rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
1955 rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
1956
1957 if (!reg && !reg_mcu)
1958 return IRQ_NONE;
1959
1960 if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
1961 return IRQ_HANDLED;
1962
1963 /*
1964 * Handle interrupts, walk through all bits
1965 * and run the tasks, the bits are checked in order of
1966 * priority.
1967 */
1968
1969 /*
1970 * 1 - Rx ring done interrupt.
1971 */
1972 if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RXDONE))
1973 rt2x00pci_rxdone(rt2x00dev);
1974
1975 /*
1976 * 2 - Tx ring done interrupt.
1977 */
1978 if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TXDONE))
1979 rt61pci_txdone(rt2x00dev);
1980
1981 /*
1982 * 3 - Handle MCU command done.
1983 */
1984 if (reg_mcu)
1985 rt2x00pci_register_write(rt2x00dev,
1986 M2H_CMD_DONE_CSR, 0xffffffff);
1987
1988 return IRQ_HANDLED;
1989}
1990
1991/*
1992 * Device probe functions.
1993 */
1994static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1995{
1996 struct eeprom_93cx6 eeprom;
1997 u32 reg;
1998 u16 word;
1999 u8 *mac;
2000 s8 value;
2001
2002 rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
2003
2004 eeprom.data = rt2x00dev;
2005 eeprom.register_read = rt61pci_eepromregister_read;
2006 eeprom.register_write = rt61pci_eepromregister_write;
2007 eeprom.width = rt2x00_get_field32(reg, E2PROM_CSR_TYPE_93C46) ?
2008 PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
2009 eeprom.reg_data_in = 0;
2010 eeprom.reg_data_out = 0;
2011 eeprom.reg_data_clock = 0;
2012 eeprom.reg_chip_select = 0;
2013
2014 eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
2015 EEPROM_SIZE / sizeof(u16));
2016
2017 /*
2018 * Start validation of the data that has been read.
2019 */
2020 mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
2021 if (!is_valid_ether_addr(mac)) {
2022 random_ether_addr(mac);
2023 EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac));
2024 }
2025
2026 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
2027 if (word == 0xffff) {
2028 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
2029 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 2);
2030 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 2);
2031 rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
2032 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
2033 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
2034 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5225);
2035 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
2036 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
2037 }
2038
2039 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
2040 if (word == 0xffff) {
2041 rt2x00_set_field16(&word, EEPROM_NIC_ENABLE_DIVERSITY, 0);
2042 rt2x00_set_field16(&word, EEPROM_NIC_TX_DIVERSITY, 0);
2043 rt2x00_set_field16(&word, EEPROM_NIC_TX_RX_FIXED, 0);
2044 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
2045 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
2046 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
2047 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
2048 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
2049 }
2050
2051 rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word);
2052 if (word == 0xffff) {
2053 rt2x00_set_field16(&word, EEPROM_LED_LED_MODE,
2054 LED_MODE_DEFAULT);
2055 rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word);
2056 EEPROM(rt2x00dev, "Led: 0x%04x\n", word);
2057 }
2058
2059 rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
2060 if (word == 0xffff) {
2061 rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
2062 rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0);
2063 rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
2064 EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
2065 }
2066
2067 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word);
2068 if (word == 0xffff) {
2069 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
2070 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
2071 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
2072 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
2073 } else {
2074 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
2075 if (value < -10 || value > 10)
2076 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
2077 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
2078 if (value < -10 || value > 10)
2079 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
2080 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
2081 }
2082
2083 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word);
2084 if (word == 0xffff) {
2085 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
2086 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
2087 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
2088 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
2089 } else {
2090 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
2091 if (value < -10 || value > 10)
2092 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
2093 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
2094 if (value < -10 || value > 10)
2095 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
2096 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
2097 }
2098
2099 return 0;
2100}
2101
2102static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
2103{
2104 u32 reg;
2105 u16 value;
2106 u16 eeprom;
2107 u16 device;
2108
2109 /*
2110 * Read EEPROM word for configuration.
2111 */
2112 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
2113
2114 /*
2115 * Identify RF chipset.
2116 * To determine the RT chip we have to read the
2117 * PCI header of the device.
2118 */
2119 pci_read_config_word(rt2x00dev_pci(rt2x00dev),
2120 PCI_CONFIG_HEADER_DEVICE, &device);
2121 value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
2122 rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
2123 rt2x00_set_chip(rt2x00dev, device, value, reg);
2124
2125 if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
2126 !rt2x00_rf(&rt2x00dev->chip, RF5325) &&
2127 !rt2x00_rf(&rt2x00dev->chip, RF2527) &&
2128 !rt2x00_rf(&rt2x00dev->chip, RF2529)) {
2129 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
2130 return -ENODEV;
2131 }
2132
2133 /*
2134 * Identify default antenna configuration.
2135 */
2136 rt2x00dev->hw->conf.antenna_sel_tx =
2137 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
2138 rt2x00dev->hw->conf.antenna_sel_rx =
2139 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
2140
2141 /*
2142 * Read the Frame type.
2143 */
2144 if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
2145 __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
2146
2147 /*
2148 * Determine number of antenna's.
2149 */
2150 if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2)
2151 __set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags);
2152
2153 /*
2154 * Detect if this device has an hardware controlled radio.
2155 */
2156 if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
2157 __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
2158
2159 /*
2160 * Read frequency offset and RF programming sequence.
2161 */
2162 rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
2163 if (rt2x00_get_field16(eeprom, EEPROM_FREQ_SEQ))
2164 __set_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags);
2165
2166 rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
2167
2168 /*
2169 * Read external LNA informations.
2170 */
2171 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
2172
2173 if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
2174 __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
2175 if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
2176 __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
2177
2178 /*
2179 * Store led settings, for correct led behaviour.
2180 * If the eeprom value is invalid,
2181 * switch to default led mode.
2182 */
2183 rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
2184
2185 rt2x00dev->led_mode = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
2186
2187 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE,
2188 rt2x00dev->led_mode);
2189 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0,
2190 rt2x00_get_field16(eeprom,
2191 EEPROM_LED_POLARITY_GPIO_0));
2192 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1,
2193 rt2x00_get_field16(eeprom,
2194 EEPROM_LED_POLARITY_GPIO_1));
2195 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2,
2196 rt2x00_get_field16(eeprom,
2197 EEPROM_LED_POLARITY_GPIO_2));
2198 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3,
2199 rt2x00_get_field16(eeprom,
2200 EEPROM_LED_POLARITY_GPIO_3));
2201 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4,
2202 rt2x00_get_field16(eeprom,
2203 EEPROM_LED_POLARITY_GPIO_4));
2204 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT,
2205 rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
2206 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG,
2207 rt2x00_get_field16(eeprom,
2208 EEPROM_LED_POLARITY_RDY_G));
2209 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A,
2210 rt2x00_get_field16(eeprom,
2211 EEPROM_LED_POLARITY_RDY_A));
2212
2213 return 0;
2214}
2215
2216/*
2217 * RF value list for RF5225 & RF5325
2218 * Supports: 2.4 GHz & 5.2 GHz, rf_sequence disabled
2219 */
2220static const struct rf_channel rf_vals_noseq[] = {
2221 { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
2222 { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
2223 { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
2224 { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
2225 { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
2226 { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
2227 { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
2228 { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
2229 { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
2230 { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
2231 { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
2232 { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
2233 { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
2234 { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
2235
2236 /* 802.11 UNI / HyperLan 2 */
2237 { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
2238 { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
2239 { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
2240 { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
2241 { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
2242 { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
2243 { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
2244 { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },
2245
2246 /* 802.11 HyperLan 2 */
2247 { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
2248 { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
2249 { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
2250 { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
2251 { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
2252 { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
2253 { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
2254 { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
2255 { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
2256 { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },
2257
2258 /* 802.11 UNII */
2259 { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
2260 { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
2261 { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
2262 { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
2263 { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
2264 { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },
2265
2266 /* MMAC(Japan)J52 ch 34,38,42,46 */
2267 { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
2268 { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
2269 { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
2270 { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
2271};
2272
2273/*
2274 * RF value list for RF5225 & RF5325
2275 * Supports: 2.4 GHz & 5.2 GHz, rf_sequence enabled
2276 */
2277static const struct rf_channel rf_vals_seq[] = {
2278 { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
2279 { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
2280 { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
2281 { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
2282 { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
2283 { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
2284 { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
2285 { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
2286 { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
2287 { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
2288 { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
2289 { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
2290 { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
2291 { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
2292
2293 /* 802.11 UNI / HyperLan 2 */
2294 { 36, 0x00002cd4, 0x0004481a, 0x00098455, 0x000c0a03 },
2295 { 40, 0x00002cd0, 0x00044682, 0x00098455, 0x000c0a03 },
2296 { 44, 0x00002cd0, 0x00044686, 0x00098455, 0x000c0a1b },
2297 { 48, 0x00002cd0, 0x0004468e, 0x00098655, 0x000c0a0b },
2298 { 52, 0x00002cd0, 0x00044692, 0x00098855, 0x000c0a23 },
2299 { 56, 0x00002cd0, 0x0004469a, 0x00098c55, 0x000c0a13 },
2300 { 60, 0x00002cd0, 0x000446a2, 0x00098e55, 0x000c0a03 },
2301 { 64, 0x00002cd0, 0x000446a6, 0x00099255, 0x000c0a1b },
2302
2303 /* 802.11 HyperLan 2 */
2304 { 100, 0x00002cd4, 0x0004489a, 0x000b9855, 0x000c0a03 },
2305 { 104, 0x00002cd4, 0x000448a2, 0x000b9855, 0x000c0a03 },
2306 { 108, 0x00002cd4, 0x000448aa, 0x000b9855, 0x000c0a03 },
2307 { 112, 0x00002cd4, 0x000448b2, 0x000b9a55, 0x000c0a03 },
2308 { 116, 0x00002cd4, 0x000448ba, 0x000b9a55, 0x000c0a03 },
2309 { 120, 0x00002cd0, 0x00044702, 0x000b9a55, 0x000c0a03 },
2310 { 124, 0x00002cd0, 0x00044706, 0x000b9a55, 0x000c0a1b },
2311 { 128, 0x00002cd0, 0x0004470e, 0x000b9c55, 0x000c0a0b },
2312 { 132, 0x00002cd0, 0x00044712, 0x000b9c55, 0x000c0a23 },
2313 { 136, 0x00002cd0, 0x0004471a, 0x000b9e55, 0x000c0a13 },
2314
2315 /* 802.11 UNII */
2316 { 140, 0x00002cd0, 0x00044722, 0x000b9e55, 0x000c0a03 },
2317 { 149, 0x00002cd0, 0x0004472e, 0x000ba255, 0x000c0a1b },
2318 { 153, 0x00002cd0, 0x00044736, 0x000ba255, 0x000c0a0b },
2319 { 157, 0x00002cd4, 0x0004490a, 0x000ba255, 0x000c0a17 },
2320 { 161, 0x00002cd4, 0x00044912, 0x000ba255, 0x000c0a17 },
2321 { 165, 0x00002cd4, 0x0004491a, 0x000ba255, 0x000c0a17 },
2322
2323 /* MMAC(Japan)J52 ch 34,38,42,46 */
2324 { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000c0a0b },
2325 { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000c0a13 },
2326 { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000c0a1b },
2327 { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 },
2328};
2329
2330static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
2331{
2332 struct hw_mode_spec *spec = &rt2x00dev->spec;
2333 u8 *txpower;
2334 unsigned int i;
2335
2336 /*
2337 * Initialize all hw fields.
2338 */
2339 rt2x00dev->hw->flags =
2340 IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
2341 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
2342 IEEE80211_HW_MONITOR_DURING_OPER |
2343 IEEE80211_HW_NO_PROBE_FILTERING;
2344 rt2x00dev->hw->extra_tx_headroom = 0;
2345 rt2x00dev->hw->max_signal = MAX_SIGNAL;
2346 rt2x00dev->hw->max_rssi = MAX_RX_SSI;
2347 rt2x00dev->hw->queues = 5;
2348
2349 SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
2350 SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
2351 rt2x00_eeprom_addr(rt2x00dev,
2352 EEPROM_MAC_ADDR_0));
2353
2354 /*
2355 * Convert tx_power array in eeprom.
2356 */
2357 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
2358 for (i = 0; i < 14; i++)
2359 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
2360
2361 /*
2362 * Initialize hw_mode information.
2363 */
2364 spec->num_modes = 2;
2365 spec->num_rates = 12;
2366 spec->tx_power_a = NULL;
2367 spec->tx_power_bg = txpower;
2368 spec->tx_power_default = DEFAULT_TXPOWER;
2369
2370 if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) {
2371 spec->num_channels = 14;
2372 spec->channels = rf_vals_noseq;
2373 } else {
2374 spec->num_channels = 14;
2375 spec->channels = rf_vals_seq;
2376 }
2377
2378 if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
2379 rt2x00_rf(&rt2x00dev->chip, RF5325)) {
2380 spec->num_modes = 3;
2381 spec->num_channels = ARRAY_SIZE(rf_vals_seq);
2382
2383 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
2384 for (i = 0; i < 14; i++)
2385 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
2386
2387 spec->tx_power_a = txpower;
2388 }
2389}
2390
2391static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
2392{
2393 int retval;
2394
2395 /*
2396 * Allocate eeprom data.
2397 */
2398 retval = rt61pci_validate_eeprom(rt2x00dev);
2399 if (retval)
2400 return retval;
2401
2402 retval = rt61pci_init_eeprom(rt2x00dev);
2403 if (retval)
2404 return retval;
2405
2406 /*
2407 * Initialize hw specifications.
2408 */
2409 rt61pci_probe_hw_mode(rt2x00dev);
2410
2411 /*
2412 * This device requires firmware
2413 */
2414 __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags);
2415
2416 /*
2417 * Set the rssi offset.
2418 */
2419 rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
2420
2421 return 0;
2422}
2423
2424/*
2425 * IEEE80211 stack callback functions.
2426 */
2427static int rt61pci_set_retry_limit(struct ieee80211_hw *hw,
2428 u32 short_retry, u32 long_retry)
2429{
2430 struct rt2x00_dev *rt2x00dev = hw->priv;
2431 u32 reg;
2432
2433 rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
2434 rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry);
2435 rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry);
2436 rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
2437
2438 return 0;
2439}
2440
2441static u64 rt61pci_get_tsf(struct ieee80211_hw *hw)
2442{
2443 struct rt2x00_dev *rt2x00dev = hw->priv;
2444 u64 tsf;
2445 u32 reg;
2446
2447 rt2x00pci_register_read(rt2x00dev, TXRX_CSR13, &reg);
2448 tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
2449 rt2x00pci_register_read(rt2x00dev, TXRX_CSR12, &reg);
2450 tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
2451
2452 return tsf;
2453}
2454
2455static void rt61pci_reset_tsf(struct ieee80211_hw *hw)
2456{
2457 struct rt2x00_dev *rt2x00dev = hw->priv;
2458
2459 rt2x00pci_register_write(rt2x00dev, TXRX_CSR12, 0);
2460 rt2x00pci_register_write(rt2x00dev, TXRX_CSR13, 0);
2461}
2462
2463int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
2464 struct ieee80211_tx_control *control)
2465{
2466 struct rt2x00_dev *rt2x00dev = hw->priv;
2467
2468 /*
2469 * Just in case the ieee80211 doesn't set this,
2470 * but we need this queue set for the descriptor
2471 * initialization.
2472 */
2473 control->queue = IEEE80211_TX_QUEUE_BEACON;
2474
2475 /*
2476 * We need to append the descriptor in front of the
2477 * beacon frame.
2478 */
2479 if (skb_headroom(skb) < TXD_DESC_SIZE) {
2480 if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC)) {
2481 dev_kfree_skb(skb);
2482 return -ENOMEM;
2483 }
2484 }
2485
2486 /*
2487 * First we create the beacon.
2488 */
2489 skb_push(skb, TXD_DESC_SIZE);
2490 rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data,
2491 (struct ieee80211_hdr *)(skb->data +
2492 TXD_DESC_SIZE),
2493 skb->len - TXD_DESC_SIZE, control);
2494
2495 /*
2496 * Write entire beacon with descriptor to register,
2497 * and kick the beacon generator.
2498 */
2499 rt2x00pci_register_multiwrite(rt2x00dev, HW_BEACON_BASE0, skb->data, skb->len);
2500 rt61pci_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
2501
2502 return 0;
2503}
2504
2505static const struct ieee80211_ops rt61pci_mac80211_ops = {
2506 .tx = rt2x00mac_tx,
2507 .add_interface = rt2x00mac_add_interface,
2508 .remove_interface = rt2x00mac_remove_interface,
2509 .config = rt2x00mac_config,
2510 .config_interface = rt2x00mac_config_interface,
2511 .set_multicast_list = rt2x00mac_set_multicast_list,
2512 .get_stats = rt2x00mac_get_stats,
2513 .set_retry_limit = rt61pci_set_retry_limit,
2514 .conf_tx = rt2x00mac_conf_tx,
2515 .get_tx_stats = rt2x00mac_get_tx_stats,
2516 .get_tsf = rt61pci_get_tsf,
2517 .reset_tsf = rt61pci_reset_tsf,
2518 .beacon_update = rt61pci_beacon_update,
2519};
2520
2521static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
2522 .irq_handler = rt61pci_interrupt,
2523 .probe_hw = rt61pci_probe_hw,
2524 .get_firmware_name = rt61pci_get_firmware_name,
2525 .load_firmware = rt61pci_load_firmware,
2526 .initialize = rt2x00pci_initialize,
2527 .uninitialize = rt2x00pci_uninitialize,
2528 .set_device_state = rt61pci_set_device_state,
2529#ifdef CONFIG_RT61PCI_RFKILL
2530 .rfkill_poll = rt61pci_rfkill_poll,
2531#endif /* CONFIG_RT61PCI_RFKILL */
2532 .link_stats = rt61pci_link_stats,
2533 .reset_tuner = rt61pci_reset_tuner,
2534 .link_tuner = rt61pci_link_tuner,
2535 .write_tx_desc = rt61pci_write_tx_desc,
2536 .write_tx_data = rt2x00pci_write_tx_data,
2537 .kick_tx_queue = rt61pci_kick_tx_queue,
2538 .fill_rxdone = rt61pci_fill_rxdone,
2539 .config_mac_addr = rt61pci_config_mac_addr,
2540 .config_bssid = rt61pci_config_bssid,
2541 .config_packet_filter = rt61pci_config_packet_filter,
2542 .config_type = rt61pci_config_type,
2543 .config = rt61pci_config,
2544};
2545
2546static const struct rt2x00_ops rt61pci_ops = {
2547 .name = DRV_NAME,
2548 .rxd_size = RXD_DESC_SIZE,
2549 .txd_size = TXD_DESC_SIZE,
2550 .eeprom_size = EEPROM_SIZE,
2551 .rf_size = RF_SIZE,
2552 .lib = &rt61pci_rt2x00_ops,
2553 .hw = &rt61pci_mac80211_ops,
2554#ifdef CONFIG_RT2X00_LIB_DEBUGFS
2555 .debugfs = &rt61pci_rt2x00debug,
2556#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
2557};
2558
2559/*
2560 * RT61pci module information.
2561 */
2562static struct pci_device_id rt61pci_device_table[] = {
2563 /* RT2561s */
2564 { PCI_DEVICE(0x1814, 0x0301), PCI_DEVICE_DATA(&rt61pci_ops) },
2565 /* RT2561 v2 */
2566 { PCI_DEVICE(0x1814, 0x0302), PCI_DEVICE_DATA(&rt61pci_ops) },
2567 /* RT2661 */
2568 { PCI_DEVICE(0x1814, 0x0401), PCI_DEVICE_DATA(&rt61pci_ops) },
2569 { 0, }
2570};
2571
2572MODULE_AUTHOR(DRV_PROJECT);
2573MODULE_VERSION(DRV_VERSION);
2574MODULE_DESCRIPTION("Ralink RT61 PCI & PCMCIA Wireless LAN driver.");
2575MODULE_SUPPORTED_DEVICE("Ralink RT2561, RT2561s & RT2661 "
2576 "PCI & PCMCIA chipset based cards");
2577MODULE_DEVICE_TABLE(pci, rt61pci_device_table);
2578MODULE_FIRMWARE(FIRMWARE_RT2561);
2579MODULE_FIRMWARE(FIRMWARE_RT2561s);
2580MODULE_FIRMWARE(FIRMWARE_RT2661);
2581MODULE_LICENSE("GPL");
2582
2583static struct pci_driver rt61pci_driver = {
2584 .name = DRV_NAME,
2585 .id_table = rt61pci_device_table,
2586 .probe = rt2x00pci_probe,
2587 .remove = __devexit_p(rt2x00pci_remove),
2588 .suspend = rt2x00pci_suspend,
2589 .resume = rt2x00pci_resume,
2590};
2591
2592static int __init rt61pci_init(void)
2593{
2594 return pci_register_driver(&rt61pci_driver);
2595}
2596
2597static void __exit rt61pci_exit(void)
2598{
2599 pci_unregister_driver(&rt61pci_driver);
2600}
2601
2602module_init(rt61pci_init);
2603module_exit(rt61pci_exit);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
new file mode 100644
index 000000000000..6721d7dd32bc
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -0,0 +1,1457 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt61pci
23 Abstract: Data structures and registers for the rt61pci module.
24 Supported chipsets: RT2561, RT2561s, RT2661.
25 */
26
27#ifndef RT61PCI_H
28#define RT61PCI_H
29
30/*
31 * RF chip defines.
32 */
33#define RF5225 0x0001
34#define RF5325 0x0002
35#define RF2527 0x0003
36#define RF2529 0x0004
37
38/*
39 * Signal information.
40 * Defaul offset is required for RSSI <-> dBm conversion.
41 */
42#define MAX_SIGNAL 100
43#define MAX_RX_SSI -1
44#define DEFAULT_RSSI_OFFSET 120
45
46/*
47 * Register layout information.
48 */
49#define CSR_REG_BASE 0x3000
50#define CSR_REG_SIZE 0x04b0
51#define EEPROM_BASE 0x0000
52#define EEPROM_SIZE 0x0100
53#define BBP_SIZE 0x0080
54#define RF_SIZE 0x0014
55
56/*
57 * PCI registers.
58 */
59
60/*
61 * PCI Configuration Header
62 */
63#define PCI_CONFIG_HEADER_VENDOR 0x0000
64#define PCI_CONFIG_HEADER_DEVICE 0x0002
65
66/*
67 * HOST_CMD_CSR: For HOST to interrupt embedded processor
68 */
69#define HOST_CMD_CSR 0x0008
70#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x0000007f)
71#define HOST_CMD_CSR_INTERRUPT_MCU FIELD32(0x00000080)
72
73/*
74 * MCU_CNTL_CSR
75 * SELECT_BANK: Select 8051 program bank.
76 * RESET: Enable 8051 reset state.
77 * READY: Ready state for 8051.
78 */
79#define MCU_CNTL_CSR 0x000c
80#define MCU_CNTL_CSR_SELECT_BANK FIELD32(0x00000001)
81#define MCU_CNTL_CSR_RESET FIELD32(0x00000002)
82#define MCU_CNTL_CSR_READY FIELD32(0x00000004)
83
84/*
85 * SOFT_RESET_CSR
86 */
87#define SOFT_RESET_CSR 0x0010
88
89/*
90 * MCU_INT_SOURCE_CSR: MCU interrupt source/mask register.
91 */
92#define MCU_INT_SOURCE_CSR 0x0014
93#define MCU_INT_SOURCE_CSR_0 FIELD32(0x00000001)
94#define MCU_INT_SOURCE_CSR_1 FIELD32(0x00000002)
95#define MCU_INT_SOURCE_CSR_2 FIELD32(0x00000004)
96#define MCU_INT_SOURCE_CSR_3 FIELD32(0x00000008)
97#define MCU_INT_SOURCE_CSR_4 FIELD32(0x00000010)
98#define MCU_INT_SOURCE_CSR_5 FIELD32(0x00000020)
99#define MCU_INT_SOURCE_CSR_6 FIELD32(0x00000040)
100#define MCU_INT_SOURCE_CSR_7 FIELD32(0x00000080)
101#define MCU_INT_SOURCE_CSR_TWAKEUP FIELD32(0x00000100)
102#define MCU_INT_SOURCE_CSR_TBTT_EXPIRE FIELD32(0x00000200)
103
104/*
105 * MCU_INT_MASK_CSR: MCU interrupt source/mask register.
106 */
107#define MCU_INT_MASK_CSR 0x0018
108#define MCU_INT_MASK_CSR_0 FIELD32(0x00000001)
109#define MCU_INT_MASK_CSR_1 FIELD32(0x00000002)
110#define MCU_INT_MASK_CSR_2 FIELD32(0x00000004)
111#define MCU_INT_MASK_CSR_3 FIELD32(0x00000008)
112#define MCU_INT_MASK_CSR_4 FIELD32(0x00000010)
113#define MCU_INT_MASK_CSR_5 FIELD32(0x00000020)
114#define MCU_INT_MASK_CSR_6 FIELD32(0x00000040)
115#define MCU_INT_MASK_CSR_7 FIELD32(0x00000080)
116#define MCU_INT_MASK_CSR_TWAKEUP FIELD32(0x00000100)
117#define MCU_INT_MASK_CSR_TBTT_EXPIRE FIELD32(0x00000200)
118
119/*
120 * PCI_USEC_CSR
121 */
122#define PCI_USEC_CSR 0x001c
123
124/*
125 * Security key table memory.
126 * 16 entries 32-byte for shared key table
127 * 64 entries 32-byte for pairwise key table
128 * 64 entries 8-byte for pairwise ta key table
129 */
130#define SHARED_KEY_TABLE_BASE 0x1000
131#define PAIRWISE_KEY_TABLE_BASE 0x1200
132#define PAIRWISE_TA_TABLE_BASE 0x1a00
133
134struct hw_key_entry {
135 u8 key[16];
136 u8 tx_mic[8];
137 u8 rx_mic[8];
138} __attribute__ ((packed));
139
140struct hw_pairwise_ta_entry {
141 u8 address[6];
142 u8 reserved[2];
143} __attribute__ ((packed));
144
145/*
146 * Other on-chip shared memory space.
147 */
148#define HW_CIS_BASE 0x2000
149#define HW_NULL_BASE 0x2b00
150
151/*
152 * Since NULL frame won't be that long (256 byte),
153 * We steal 16 tail bytes to save debugging settings.
154 */
155#define HW_DEBUG_SETTING_BASE 0x2bf0
156
157/*
158 * On-chip BEACON frame space.
159 */
160#define HW_BEACON_BASE0 0x2c00
161#define HW_BEACON_BASE1 0x2d00
162#define HW_BEACON_BASE2 0x2e00
163#define HW_BEACON_BASE3 0x2f00
164#define HW_BEACON_OFFSET 0x0100
165
166/*
167 * HOST-MCU shared memory.
168 */
169
170/*
171 * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
172 */
173#define H2M_MAILBOX_CSR 0x2100
174#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff)
175#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00)
176#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000)
177#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000)
178
179/*
180 * MCU_LEDCS: LED control for MCU Mailbox.
181 */
182#define MCU_LEDCS_LED_MODE FIELD16(0x001f)
183#define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020)
184#define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040)
185#define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080)
186#define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100)
187#define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200)
188#define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400)
189#define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800)
190#define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000)
191#define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000)
192#define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000)
193#define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000)
194
195/*
196 * M2H_CMD_DONE_CSR.
197 */
198#define M2H_CMD_DONE_CSR 0x2104
199
200/*
201 * MCU_TXOP_ARRAY_BASE.
202 */
203#define MCU_TXOP_ARRAY_BASE 0x2110
204
205/*
206 * MAC Control/Status Registers(CSR).
207 * Some values are set in TU, whereas 1 TU == 1024 us.
208 */
209
210/*
211 * MAC_CSR0: ASIC revision number.
212 */
213#define MAC_CSR0 0x3000
214
215/*
216 * MAC_CSR1: System control register.
217 * SOFT_RESET: Software reset bit, 1: reset, 0: normal.
218 * BBP_RESET: Hardware reset BBP.
219 * HOST_READY: Host is ready after initialization, 1: ready.
220 */
221#define MAC_CSR1 0x3004
222#define MAC_CSR1_SOFT_RESET FIELD32(0x00000001)
223#define MAC_CSR1_BBP_RESET FIELD32(0x00000002)
224#define MAC_CSR1_HOST_READY FIELD32(0x00000004)
225
226/*
227 * MAC_CSR2: STA MAC register 0.
228 */
229#define MAC_CSR2 0x3008
230#define MAC_CSR2_BYTE0 FIELD32(0x000000ff)
231#define MAC_CSR2_BYTE1 FIELD32(0x0000ff00)
232#define MAC_CSR2_BYTE2 FIELD32(0x00ff0000)
233#define MAC_CSR2_BYTE3 FIELD32(0xff000000)
234
235/*
236 * MAC_CSR3: STA MAC register 1.
237 */
238#define MAC_CSR3 0x300c
239#define MAC_CSR3_BYTE4 FIELD32(0x000000ff)
240#define MAC_CSR3_BYTE5 FIELD32(0x0000ff00)
241#define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000)
242
243/*
244 * MAC_CSR4: BSSID register 0.
245 */
246#define MAC_CSR4 0x3010
247#define MAC_CSR4_BYTE0 FIELD32(0x000000ff)
248#define MAC_CSR4_BYTE1 FIELD32(0x0000ff00)
249#define MAC_CSR4_BYTE2 FIELD32(0x00ff0000)
250#define MAC_CSR4_BYTE3 FIELD32(0xff000000)
251
252/*
253 * MAC_CSR5: BSSID register 1.
254 * BSS_ID_MASK: 3: one BSSID, 0: 4 BSSID, 2 or 1: 2 BSSID.
255 */
256#define MAC_CSR5 0x3014
257#define MAC_CSR5_BYTE4 FIELD32(0x000000ff)
258#define MAC_CSR5_BYTE5 FIELD32(0x0000ff00)
259#define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000)
260
261/*
262 * MAC_CSR6: Maximum frame length register.
263 */
264#define MAC_CSR6 0x3018
265#define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff)
266
267/*
268 * MAC_CSR7: Reserved
269 */
270#define MAC_CSR7 0x301c
271
272/*
273 * MAC_CSR8: SIFS/EIFS register.
274 * All units are in US.
275 */
276#define MAC_CSR8 0x3020
277#define MAC_CSR8_SIFS FIELD32(0x000000ff)
278#define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00)
279#define MAC_CSR8_EIFS FIELD32(0xffff0000)
280
281/*
282 * MAC_CSR9: Back-Off control register.
283 * SLOT_TIME: Slot time, default is 20us for 802.11BG.
284 * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1).
285 * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1).
286 * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD.
287 */
288#define MAC_CSR9 0x3024
289#define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff)
290#define MAC_CSR9_CWMIN FIELD32(0x00000f00)
291#define MAC_CSR9_CWMAX FIELD32(0x0000f000)
292#define MAC_CSR9_CW_SELECT FIELD32(0x00010000)
293
294/*
295 * MAC_CSR10: Power state configuration.
296 */
297#define MAC_CSR10 0x3028
298
299/*
300 * MAC_CSR11: Power saving transition time register.
301 * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU.
302 * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
303 * WAKEUP_LATENCY: In unit of TU.
304 */
305#define MAC_CSR11 0x302c
306#define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff)
307#define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00)
308#define MAC_CSR11_AUTOWAKE FIELD32(0x00008000)
309#define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000)
310
311/*
312 * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1).
313 * CURRENT_STATE: 0:sleep, 1:awake.
314 * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP.
315 * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake.
316 */
317#define MAC_CSR12 0x3030
318#define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001)
319#define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002)
320#define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004)
321#define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008)
322
323/*
324 * MAC_CSR13: GPIO.
325 */
326#define MAC_CSR13 0x3034
327#define MAC_CSR13_BIT0 FIELD32(0x00000001)
328#define MAC_CSR13_BIT1 FIELD32(0x00000002)
329#define MAC_CSR13_BIT2 FIELD32(0x00000004)
330#define MAC_CSR13_BIT3 FIELD32(0x00000008)
331#define MAC_CSR13_BIT4 FIELD32(0x00000010)
332#define MAC_CSR13_BIT5 FIELD32(0x00000020)
333#define MAC_CSR13_BIT6 FIELD32(0x00000040)
334#define MAC_CSR13_BIT7 FIELD32(0x00000080)
335#define MAC_CSR13_BIT8 FIELD32(0x00000100)
336#define MAC_CSR13_BIT9 FIELD32(0x00000200)
337#define MAC_CSR13_BIT10 FIELD32(0x00000400)
338#define MAC_CSR13_BIT11 FIELD32(0x00000800)
339#define MAC_CSR13_BIT12 FIELD32(0x00001000)
340
341/*
342 * MAC_CSR14: LED control register.
343 * ON_PERIOD: On period, default 70ms.
344 * OFF_PERIOD: Off period, default 30ms.
345 * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON.
346 * SW_LED: s/w LED, 1: ON, 0: OFF.
347 * HW_LED_POLARITY: 0: active low, 1: active high.
348 */
349#define MAC_CSR14 0x3038
350#define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff)
351#define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00)
352#define MAC_CSR14_HW_LED FIELD32(0x00010000)
353#define MAC_CSR14_SW_LED FIELD32(0x00020000)
354#define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000)
355#define MAC_CSR14_SW_LED2 FIELD32(0x00080000)
356
357/*
358 * MAC_CSR15: NAV control.
359 */
360#define MAC_CSR15 0x303c
361
362/*
363 * TXRX control registers.
364 * Some values are set in TU, whereas 1 TU == 1024 us.
365 */
366
367/*
368 * TXRX_CSR0: TX/RX configuration register.
369 * TSF_OFFSET: Default is 24.
370 * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame.
371 * DISABLE_RX: Disable Rx engine.
372 * DROP_CRC: Drop CRC error.
373 * DROP_PHYSICAL: Drop physical error.
374 * DROP_CONTROL: Drop control frame.
375 * DROP_NOT_TO_ME: Drop not to me unicast frame.
376 * DROP_TO_DS: Drop fram ToDs bit is true.
377 * DROP_VERSION_ERROR: Drop version error frame.
378 * DROP_MULTICAST: Drop multicast frames.
379 * DROP_BORADCAST: Drop broadcast frames.
380 * ROP_ACK_CTS: Drop received ACK and CTS.
381 */
382#define TXRX_CSR0 0x3040
383#define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff)
384#define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00)
385#define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000)
386#define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000)
387#define TXRX_CSR0_DROP_CRC FIELD32(0x00020000)
388#define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000)
389#define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000)
390#define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000)
391#define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000)
392#define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000)
393#define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000)
394#define TXRX_CSR0_DROP_BORADCAST FIELD32(0x01000000)
395#define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000)
396#define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000)
397
398/*
399 * TXRX_CSR1
400 */
401#define TXRX_CSR1 0x3044
402#define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f)
403#define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080)
404#define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00)
405#define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000)
406#define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000)
407#define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000)
408#define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000)
409#define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000)
410
411/*
412 * TXRX_CSR2
413 */
414#define TXRX_CSR2 0x3048
415#define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f)
416#define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080)
417#define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00)
418#define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000)
419#define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000)
420#define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000)
421#define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000)
422#define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000)
423
424/*
425 * TXRX_CSR3
426 */
427#define TXRX_CSR3 0x304c
428#define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f)
429#define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080)
430#define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00)
431#define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000)
432#define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000)
433#define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000)
434#define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000)
435#define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000)
436
437/*
438 * TXRX_CSR4: Auto-Responder/Tx-retry register.
439 * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble.
440 * OFDM_TX_RATE_DOWN: 1:enable.
441 * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step.
442 * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M.
443 */
444#define TXRX_CSR4 0x3050
445#define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff)
446#define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700)
447#define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000)
448#define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000)
449#define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000)
450#define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000)
451#define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000)
452#define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000)
453#define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000)
454#define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000)
455
456/*
457 * TXRX_CSR5
458 */
459#define TXRX_CSR5 0x3054
460
461/*
462 * TXRX_CSR6: ACK/CTS payload consumed time
463 */
464#define TXRX_CSR6 0x3058
465
466/*
467 * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps.
468 */
469#define TXRX_CSR7 0x305c
470#define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff)
471#define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00)
472#define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000)
473#define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000)
474
475/*
476 * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps.
477 */
478#define TXRX_CSR8 0x3060
479#define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff)
480#define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00)
481#define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000)
482#define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000)
483
484/*
485 * TXRX_CSR9: Synchronization control register.
486 * BEACON_INTERVAL: In unit of 1/16 TU.
487 * TSF_TICKING: Enable TSF auto counting.
488 * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
489 * BEACON_GEN: Enable beacon generator.
490 */
491#define TXRX_CSR9 0x3064
492#define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff)
493#define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000)
494#define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000)
495#define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000)
496#define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000)
497#define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000)
498
499/*
500 * TXRX_CSR10: BEACON alignment.
501 */
502#define TXRX_CSR10 0x3068
503
504/*
505 * TXRX_CSR11: AES mask.
506 */
507#define TXRX_CSR11 0x306c
508
509/*
510 * TXRX_CSR12: TSF low 32.
511 */
512#define TXRX_CSR12 0x3070
513#define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff)
514
515/*
516 * TXRX_CSR13: TSF high 32.
517 */
518#define TXRX_CSR13 0x3074
519#define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff)
520
521/*
522 * TXRX_CSR14: TBTT timer.
523 */
524#define TXRX_CSR14 0x3078
525
526/*
527 * TXRX_CSR15: TKIP MIC priority byte "AND" mask.
528 */
529#define TXRX_CSR15 0x307c
530
531/*
532 * PHY control registers.
533 * Some values are set in TU, whereas 1 TU == 1024 us.
534 */
535
536/*
537 * PHY_CSR0: RF/PS control.
538 */
539#define PHY_CSR0 0x3080
540#define PHY_CSR0_PA_PE_BG FIELD32(0x00010000)
541#define PHY_CSR0_PA_PE_A FIELD32(0x00020000)
542
543/*
544 * PHY_CSR1
545 */
546#define PHY_CSR1 0x3084
547
548/*
549 * PHY_CSR2: Pre-TX BBP control.
550 */
551#define PHY_CSR2 0x3088
552
553/*
554 * PHY_CSR3: BBP serial control register.
555 * VALUE: Register value to program into BBP.
556 * REG_NUM: Selected BBP register.
557 * READ_CONTROL: 0: Write BBP, 1: Read BBP.
558 * BUSY: 1: ASIC is busy execute BBP programming.
559 */
560#define PHY_CSR3 0x308c
561#define PHY_CSR3_VALUE FIELD32(0x000000ff)
562#define PHY_CSR3_REGNUM FIELD32(0x00007f00)
563#define PHY_CSR3_READ_CONTROL FIELD32(0x00008000)
564#define PHY_CSR3_BUSY FIELD32(0x00010000)
565
566/*
567 * PHY_CSR4: RF serial control register
568 * VALUE: Register value (include register id) serial out to RF/IF chip.
569 * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22).
570 * IF_SELECT: 1: select IF to program, 0: select RF to program.
571 * PLL_LD: RF PLL_LD status.
572 * BUSY: 1: ASIC is busy execute RF programming.
573 */
574#define PHY_CSR4 0x3090
575#define PHY_CSR4_VALUE FIELD32(0x00ffffff)
576#define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000)
577#define PHY_CSR4_IF_SELECT FIELD32(0x20000000)
578#define PHY_CSR4_PLL_LD FIELD32(0x40000000)
579#define PHY_CSR4_BUSY FIELD32(0x80000000)
580
581/*
582 * PHY_CSR5: RX to TX signal switch timing control.
583 */
584#define PHY_CSR5 0x3094
585#define PHY_CSR5_IQ_FLIP FIELD32(0x00000004)
586
587/*
588 * PHY_CSR6: TX to RX signal timing control.
589 */
590#define PHY_CSR6 0x3098
591#define PHY_CSR6_IQ_FLIP FIELD32(0x00000004)
592
593/*
594 * PHY_CSR7: TX DAC switching timing control.
595 */
596#define PHY_CSR7 0x309c
597
598/*
599 * Security control register.
600 */
601
602/*
603 * SEC_CSR0: Shared key table control.
604 */
605#define SEC_CSR0 0x30a0
606#define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001)
607#define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002)
608#define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004)
609#define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008)
610#define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010)
611#define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020)
612#define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040)
613#define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080)
614#define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100)
615#define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200)
616#define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400)
617#define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800)
618#define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000)
619#define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000)
620#define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000)
621#define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000)
622
623/*
624 * SEC_CSR1: Shared key table security mode register.
625 */
626#define SEC_CSR1 0x30a4
627#define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007)
628#define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070)
629#define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700)
630#define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000)
631#define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000)
632#define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000)
633#define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000)
634#define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000)
635
636/*
637 * Pairwise key table valid bitmap registers.
638 * SEC_CSR2: pairwise key table valid bitmap 0.
639 * SEC_CSR3: pairwise key table valid bitmap 1.
640 */
641#define SEC_CSR2 0x30a8
642#define SEC_CSR3 0x30ac
643
644/*
645 * SEC_CSR4: Pairwise key table lookup control.
646 */
647#define SEC_CSR4 0x30b0
648
649/*
650 * SEC_CSR5: shared key table security mode register.
651 */
652#define SEC_CSR5 0x30b4
653#define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007)
654#define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070)
655#define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700)
656#define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000)
657#define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000)
658#define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000)
659#define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000)
660#define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000)
661
662/*
663 * STA control registers.
664 */
665
666/*
667 * STA_CSR0: RX PLCP error count & RX FCS error count.
668 */
669#define STA_CSR0 0x30c0
670#define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff)
671#define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000)
672
673/*
674 * STA_CSR1: RX False CCA count & RX LONG frame count.
675 */
676#define STA_CSR1 0x30c4
677#define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff)
678#define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000)
679
680/*
681 * STA_CSR2: TX Beacon count and RX FIFO overflow count.
682 */
683#define STA_CSR2 0x30c8
684#define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff)
685#define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000)
686
687/*
688 * STA_CSR3: TX Beacon count.
689 */
690#define STA_CSR3 0x30cc
691#define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff)
692
693/*
694 * STA_CSR4: TX Result status register.
695 * VALID: 1:This register contains a valid TX result.
696 */
697#define STA_CSR4 0x30d0
698#define STA_CSR4_VALID FIELD32(0x00000001)
699#define STA_CSR4_TX_RESULT FIELD32(0x0000000e)
700#define STA_CSR4_RETRY_COUNT FIELD32(0x000000f0)
701#define STA_CSR4_PID_SUBTYPE FIELD32(0x00001f00)
702#define STA_CSR4_PID_TYPE FIELD32(0x0000e000)
703#define STA_CSR4_TXRATE FIELD32(0x000f0000)
704
705/*
706 * QOS control registers.
707 */
708
709/*
710 * QOS_CSR0: TXOP holder MAC address register.
711 */
712#define QOS_CSR0 0x30e0
713#define QOS_CSR0_BYTE0 FIELD32(0x000000ff)
714#define QOS_CSR0_BYTE1 FIELD32(0x0000ff00)
715#define QOS_CSR0_BYTE2 FIELD32(0x00ff0000)
716#define QOS_CSR0_BYTE3 FIELD32(0xff000000)
717
718/*
719 * QOS_CSR1: TXOP holder MAC address register.
720 */
721#define QOS_CSR1 0x30e4
722#define QOS_CSR1_BYTE4 FIELD32(0x000000ff)
723#define QOS_CSR1_BYTE5 FIELD32(0x0000ff00)
724
725/*
726 * QOS_CSR2: TXOP holder timeout register.
727 */
728#define QOS_CSR2 0x30e8
729
730/*
731 * RX QOS-CFPOLL MAC address register.
732 * QOS_CSR3: RX QOS-CFPOLL MAC address 0.
733 * QOS_CSR4: RX QOS-CFPOLL MAC address 1.
734 */
735#define QOS_CSR3 0x30ec
736#define QOS_CSR4 0x30f0
737
738/*
739 * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL.
740 */
741#define QOS_CSR5 0x30f4
742
743/*
744 * Host DMA registers.
745 */
746
747/*
748 * AC0_BASE_CSR: AC_BK base address.
749 */
750#define AC0_BASE_CSR 0x3400
751#define AC0_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
752
753/*
754 * AC1_BASE_CSR: AC_BE base address.
755 */
756#define AC1_BASE_CSR 0x3404
757#define AC1_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
758
759/*
760 * AC2_BASE_CSR: AC_VI base address.
761 */
762#define AC2_BASE_CSR 0x3408
763#define AC2_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
764
765/*
766 * AC3_BASE_CSR: AC_VO base address.
767 */
768#define AC3_BASE_CSR 0x340c
769#define AC3_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
770
771/*
772 * MGMT_BASE_CSR: MGMT ring base address.
773 */
774#define MGMT_BASE_CSR 0x3410
775#define MGMT_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
776
777/*
778 * TX_RING_CSR0: TX Ring size for AC_BK, AC_BE, AC_VI, AC_VO.
779 */
780#define TX_RING_CSR0 0x3418
781#define TX_RING_CSR0_AC0_RING_SIZE FIELD32(0x000000ff)
782#define TX_RING_CSR0_AC1_RING_SIZE FIELD32(0x0000ff00)
783#define TX_RING_CSR0_AC2_RING_SIZE FIELD32(0x00ff0000)
784#define TX_RING_CSR0_AC3_RING_SIZE FIELD32(0xff000000)
785
786/*
787 * TX_RING_CSR1: TX Ring size for MGMT Ring, HCCA Ring
788 * TXD_SIZE: In unit of 32-bit.
789 */
790#define TX_RING_CSR1 0x341c
791#define TX_RING_CSR1_MGMT_RING_SIZE FIELD32(0x000000ff)
792#define TX_RING_CSR1_HCCA_RING_SIZE FIELD32(0x0000ff00)
793#define TX_RING_CSR1_TXD_SIZE FIELD32(0x003f0000)
794
795/*
796 * AIFSN_CSR: AIFSN for each EDCA AC.
797 * AIFSN0: For AC_BK.
798 * AIFSN1: For AC_BE.
799 * AIFSN2: For AC_VI.
800 * AIFSN3: For AC_VO.
801 */
802#define AIFSN_CSR 0x3420
803#define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f)
804#define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0)
805#define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00)
806#define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000)
807
808/*
809 * CWMIN_CSR: CWmin for each EDCA AC.
810 * CWMIN0: For AC_BK.
811 * CWMIN1: For AC_BE.
812 * CWMIN2: For AC_VI.
813 * CWMIN3: For AC_VO.
814 */
815#define CWMIN_CSR 0x3424
816#define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f)
817#define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0)
818#define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00)
819#define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000)
820
821/*
822 * CWMAX_CSR: CWmax for each EDCA AC.
823 * CWMAX0: For AC_BK.
824 * CWMAX1: For AC_BE.
825 * CWMAX2: For AC_VI.
826 * CWMAX3: For AC_VO.
827 */
828#define CWMAX_CSR 0x3428
829#define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f)
830#define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0)
831#define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00)
832#define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000)
833
834/*
835 * TX_DMA_DST_CSR: TX DMA destination
836 * 0: TX ring0, 1: TX ring1, 2: TX ring2 3: invalid
837 */
838#define TX_DMA_DST_CSR 0x342c
839#define TX_DMA_DST_CSR_DEST_AC0 FIELD32(0x00000003)
840#define TX_DMA_DST_CSR_DEST_AC1 FIELD32(0x0000000c)
841#define TX_DMA_DST_CSR_DEST_AC2 FIELD32(0x00000030)
842#define TX_DMA_DST_CSR_DEST_AC3 FIELD32(0x000000c0)
843#define TX_DMA_DST_CSR_DEST_MGMT FIELD32(0x00000300)
844
845/*
846 * TX_CNTL_CSR: KICK/Abort TX.
847 * KICK_TX_AC0: For AC_BK.
848 * KICK_TX_AC1: For AC_BE.
849 * KICK_TX_AC2: For AC_VI.
850 * KICK_TX_AC3: For AC_VO.
851 * ABORT_TX_AC0: For AC_BK.
852 * ABORT_TX_AC1: For AC_BE.
853 * ABORT_TX_AC2: For AC_VI.
854 * ABORT_TX_AC3: For AC_VO.
855 */
856#define TX_CNTL_CSR 0x3430
857#define TX_CNTL_CSR_KICK_TX_AC0 FIELD32(0x00000001)
858#define TX_CNTL_CSR_KICK_TX_AC1 FIELD32(0x00000002)
859#define TX_CNTL_CSR_KICK_TX_AC2 FIELD32(0x00000004)
860#define TX_CNTL_CSR_KICK_TX_AC3 FIELD32(0x00000008)
861#define TX_CNTL_CSR_KICK_TX_MGMT FIELD32(0x00000010)
862#define TX_CNTL_CSR_ABORT_TX_AC0 FIELD32(0x00010000)
863#define TX_CNTL_CSR_ABORT_TX_AC1 FIELD32(0x00020000)
864#define TX_CNTL_CSR_ABORT_TX_AC2 FIELD32(0x00040000)
865#define TX_CNTL_CSR_ABORT_TX_AC3 FIELD32(0x00080000)
866#define TX_CNTL_CSR_ABORT_TX_MGMT FIELD32(0x00100000)
867
868/*
869 * LOAD_TX_RING_CSR: Load RX de
870 */
871#define LOAD_TX_RING_CSR 0x3434
872#define LOAD_TX_RING_CSR_LOAD_TXD_AC0 FIELD32(0x00000001)
873#define LOAD_TX_RING_CSR_LOAD_TXD_AC1 FIELD32(0x00000002)
874#define LOAD_TX_RING_CSR_LOAD_TXD_AC2 FIELD32(0x00000004)
875#define LOAD_TX_RING_CSR_LOAD_TXD_AC3 FIELD32(0x00000008)
876#define LOAD_TX_RING_CSR_LOAD_TXD_MGMT FIELD32(0x00000010)
877
878/*
879 * Several read-only registers, for debugging.
880 */
881#define AC0_TXPTR_CSR 0x3438
882#define AC1_TXPTR_CSR 0x343c
883#define AC2_TXPTR_CSR 0x3440
884#define AC3_TXPTR_CSR 0x3444
885#define MGMT_TXPTR_CSR 0x3448
886
887/*
888 * RX_BASE_CSR
889 */
890#define RX_BASE_CSR 0x3450
891#define RX_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
892
893/*
894 * RX_RING_CSR.
895 * RXD_SIZE: In unit of 32-bit.
896 */
897#define RX_RING_CSR 0x3454
898#define RX_RING_CSR_RING_SIZE FIELD32(0x000000ff)
899#define RX_RING_CSR_RXD_SIZE FIELD32(0x00003f00)
900#define RX_RING_CSR_RXD_WRITEBACK_SIZE FIELD32(0x00070000)
901
902/*
903 * RX_CNTL_CSR
904 */
905#define RX_CNTL_CSR 0x3458
906#define RX_CNTL_CSR_ENABLE_RX_DMA FIELD32(0x00000001)
907#define RX_CNTL_CSR_LOAD_RXD FIELD32(0x00000002)
908
909/*
910 * RXPTR_CSR: Read-only, for debugging.
911 */
912#define RXPTR_CSR 0x345c
913
914/*
915 * PCI_CFG_CSR
916 */
917#define PCI_CFG_CSR 0x3460
918
919/*
920 * BUF_FORMAT_CSR
921 */
922#define BUF_FORMAT_CSR 0x3464
923
924/*
925 * INT_SOURCE_CSR: Interrupt source register.
926 * Write one to clear corresponding bit.
927 */
928#define INT_SOURCE_CSR 0x3468
929#define INT_SOURCE_CSR_TXDONE FIELD32(0x00000001)
930#define INT_SOURCE_CSR_RXDONE FIELD32(0x00000002)
931#define INT_SOURCE_CSR_BEACON_DONE FIELD32(0x00000004)
932#define INT_SOURCE_CSR_TX_ABORT_DONE FIELD32(0x00000010)
933#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00010000)
934#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00020000)
935#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00040000)
936#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00080000)
937#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00100000)
938#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00200000)
939
940/*
941 * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
942 * MITIGATION_PERIOD: Interrupt mitigation in unit of 32 PCI clock.
943 */
944#define INT_MASK_CSR 0x346c
945#define INT_MASK_CSR_TXDONE FIELD32(0x00000001)
946#define INT_MASK_CSR_RXDONE FIELD32(0x00000002)
947#define INT_MASK_CSR_BEACON_DONE FIELD32(0x00000004)
948#define INT_MASK_CSR_TX_ABORT_DONE FIELD32(0x00000010)
949#define INT_MASK_CSR_ENABLE_MITIGATION FIELD32(0x00000080)
950#define INT_MASK_CSR_MITIGATION_PERIOD FIELD32(0x0000ff00)
951#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00010000)
952#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00020000)
953#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00040000)
954#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00080000)
955#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00100000)
956#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00200000)
957
958/*
959 * E2PROM_CSR: EEPROM control register.
960 * RELOAD: Write 1 to reload eeprom content.
961 * TYPE_93C46: 1: 93c46, 0:93c66.
962 * LOAD_STATUS: 1:loading, 0:done.
963 */
964#define E2PROM_CSR 0x3470
965#define E2PROM_CSR_RELOAD FIELD32(0x00000001)
966#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000002)
967#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000004)
968#define E2PROM_CSR_DATA_IN FIELD32(0x00000008)
969#define E2PROM_CSR_DATA_OUT FIELD32(0x00000010)
970#define E2PROM_CSR_TYPE_93C46 FIELD32(0x00000020)
971#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
972
973/*
974 * AC_TXOP_CSR0: AC_BK/AC_BE TXOP register.
975 * AC0_TX_OP: For AC_BK, in unit of 32us.
976 * AC1_TX_OP: For AC_BE, in unit of 32us.
977 */
978#define AC_TXOP_CSR0 0x3474
979#define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff)
980#define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000)
981
982/*
983 * AC_TXOP_CSR1: AC_VO/AC_VI TXOP register.
984 * AC2_TX_OP: For AC_VI, in unit of 32us.
985 * AC3_TX_OP: For AC_VO, in unit of 32us.
986 */
987#define AC_TXOP_CSR1 0x3478
988#define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff)
989#define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000)
990
991/*
992 * DMA_STATUS_CSR
993 */
994#define DMA_STATUS_CSR 0x3480
995
996/*
997 * TEST_MODE_CSR
998 */
999#define TEST_MODE_CSR 0x3484
1000
1001/*
1002 * UART0_TX_CSR
1003 */
1004#define UART0_TX_CSR 0x3488
1005
1006/*
1007 * UART0_RX_CSR
1008 */
1009#define UART0_RX_CSR 0x348c
1010
1011/*
1012 * UART0_FRAME_CSR
1013 */
1014#define UART0_FRAME_CSR 0x3490
1015
1016/*
1017 * UART0_BUFFER_CSR
1018 */
1019#define UART0_BUFFER_CSR 0x3494
1020
1021/*
1022 * IO_CNTL_CSR
1023 */
1024#define IO_CNTL_CSR 0x3498
1025
1026/*
1027 * UART_INT_SOURCE_CSR
1028 */
1029#define UART_INT_SOURCE_CSR 0x34a8
1030
1031/*
1032 * UART_INT_MASK_CSR
1033 */
1034#define UART_INT_MASK_CSR 0x34ac
1035
1036/*
1037 * PBF_QUEUE_CSR
1038 */
1039#define PBF_QUEUE_CSR 0x34b0
1040
1041/*
1042 * Firmware DMA registers.
1043 * Firmware DMA registers are dedicated for MCU usage
1044 * and should not be touched by host driver.
1045 * Therefore we skip the definition of these registers.
1046 */
1047#define FW_TX_BASE_CSR 0x34c0
1048#define FW_TX_START_CSR 0x34c4
1049#define FW_TX_LAST_CSR 0x34c8
1050#define FW_MODE_CNTL_CSR 0x34cc
1051#define FW_TXPTR_CSR 0x34d0
1052
1053/*
1054 * 8051 firmware image.
1055 */
1056#define FIRMWARE_RT2561 "rt2561.bin"
1057#define FIRMWARE_RT2561s "rt2561s.bin"
1058#define FIRMWARE_RT2661 "rt2661.bin"
1059#define FIRMWARE_IMAGE_BASE 0x4000
1060
1061/*
1062 * BBP registers.
1063 * The wordsize of the BBP is 8 bits.
1064 */
1065
1066/*
1067 * R2
1068 */
1069#define BBP_R2_BG_MODE FIELD8(0x20)
1070
1071/*
1072 * R3
1073 */
1074#define BBP_R3_SMART_MODE FIELD8(0x01)
1075
1076/*
1077 * R4: RX antenna control
1078 * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529)
1079 */
1080#define BBP_R4_RX_ANTENNA FIELD8(0x03)
1081#define BBP_R4_RX_FRAME_END FIELD8(0x20)
1082
1083/*
1084 * R77
1085 */
1086#define BBP_R77_PAIR FIELD8(0x03)
1087
1088/*
1089 * RF registers
1090 */
1091
1092/*
1093 * RF 3
1094 */
1095#define RF3_TXPOWER FIELD32(0x00003e00)
1096
1097/*
1098 * RF 4
1099 */
1100#define RF4_FREQ_OFFSET FIELD32(0x0003f000)
1101
1102/*
1103 * EEPROM content.
1104 * The wordsize of the EEPROM is 16 bits.
1105 */
1106
1107/*
1108 * HW MAC address.
1109 */
1110#define EEPROM_MAC_ADDR_0 0x0002
1111#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
1112#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
1113#define EEPROM_MAC_ADDR1 0x0004
1114#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
1115#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
1116#define EEPROM_MAC_ADDR_2 0x0006
1117#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
1118#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
1119
1120/*
1121 * EEPROM antenna.
1122 * ANTENNA_NUM: Number of antenna's.
1123 * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1124 * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1125 * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only.
1126 * DYN_TXAGC: Dynamic TX AGC control.
1127 * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
1128 * RF_TYPE: Rf_type of this adapter.
1129 */
1130#define EEPROM_ANTENNA 0x0010
1131#define EEPROM_ANTENNA_NUM FIELD16(0x0003)
1132#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
1133#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
1134#define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040)
1135#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200)
1136#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
1137#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800)
1138
1139/*
1140 * EEPROM NIC config.
1141 * ENABLE_DIVERSITY: 1:enable, 0:disable.
1142 * EXTERNAL_LNA_BG: External LNA enable for 2.4G.
1143 * CARDBUS_ACCEL: 0:enable, 1:disable.
1144 * EXTERNAL_LNA_A: External LNA enable for 5G.
1145 */
1146#define EEPROM_NIC 0x0011
1147#define EEPROM_NIC_ENABLE_DIVERSITY FIELD16(0x0001)
1148#define EEPROM_NIC_TX_DIVERSITY FIELD16(0x0002)
1149#define EEPROM_NIC_TX_RX_FIXED FIELD16(0x000c)
1150#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0010)
1151#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0020)
1152#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0040)
1153
1154/*
1155 * EEPROM geography.
1156 * GEO_A: Default geographical setting for 5GHz band
1157 * GEO: Default geographical setting.
1158 */
1159#define EEPROM_GEOGRAPHY 0x0012
1160#define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff)
1161#define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00)
1162
1163/*
1164 * EEPROM BBP.
1165 */
1166#define EEPROM_BBP_START 0x0013
1167#define EEPROM_BBP_SIZE 16
1168#define EEPROM_BBP_VALUE FIELD16(0x00ff)
1169#define EEPROM_BBP_REG_ID FIELD16(0xff00)
1170
1171/*
1172 * EEPROM TXPOWER 802.11G
1173 */
1174#define EEPROM_TXPOWER_G_START 0x0023
1175#define EEPROM_TXPOWER_G_SIZE 7
1176#define EEPROM_TXPOWER_G_1 FIELD16(0x00ff)
1177#define EEPROM_TXPOWER_G_2 FIELD16(0xff00)
1178
1179/*
1180 * EEPROM Frequency
1181 */
1182#define EEPROM_FREQ 0x002f
1183#define EEPROM_FREQ_OFFSET FIELD16(0x00ff)
1184#define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00)
1185#define EEPROM_FREQ_SEQ FIELD16(0x0300)
1186
1187/*
1188 * EEPROM LED.
1189 * POLARITY_RDY_G: Polarity RDY_G setting.
1190 * POLARITY_RDY_A: Polarity RDY_A setting.
1191 * POLARITY_ACT: Polarity ACT setting.
1192 * POLARITY_GPIO_0: Polarity GPIO0 setting.
1193 * POLARITY_GPIO_1: Polarity GPIO1 setting.
1194 * POLARITY_GPIO_2: Polarity GPIO2 setting.
1195 * POLARITY_GPIO_3: Polarity GPIO3 setting.
1196 * POLARITY_GPIO_4: Polarity GPIO4 setting.
1197 * LED_MODE: Led mode.
1198 */
1199#define EEPROM_LED 0x0030
1200#define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001)
1201#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
1202#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
1203#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008)
1204#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010)
1205#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020)
1206#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040)
1207#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080)
1208#define EEPROM_LED_LED_MODE FIELD16(0x1f00)
1209
1210/*
1211 * EEPROM TXPOWER 802.11A
1212 */
1213#define EEPROM_TXPOWER_A_START 0x0031
1214#define EEPROM_TXPOWER_A_SIZE 12
1215#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
1216#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
1217
1218/*
1219 * EEPROM RSSI offset 802.11BG
1220 */
1221#define EEPROM_RSSI_OFFSET_BG 0x004d
1222#define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff)
1223#define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00)
1224
1225/*
1226 * EEPROM RSSI offset 802.11A
1227 */
1228#define EEPROM_RSSI_OFFSET_A 0x004e
1229#define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff)
1230#define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00)
1231
1232/*
1233 * MCU mailbox commands.
1234 */
1235#define MCU_SLEEP 0x30
1236#define MCU_WAKEUP 0x31
1237#define MCU_LED 0x50
1238#define MCU_LED_STRENGTH 0x52
1239
1240/*
1241 * DMA descriptor defines.
1242 */
1243#define TXD_DESC_SIZE ( 16 * sizeof(struct data_desc) )
1244#define RXD_DESC_SIZE ( 16 * sizeof(struct data_desc) )
1245
1246/*
1247 * TX descriptor format for TX, PRIO and Beacon Ring.
1248 */
1249
1250/*
1251 * Word0
1252 * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used.
1253 * KEY_TABLE: Use per-client pairwise KEY table.
1254 * KEY_INDEX:
1255 * Key index (0~31) to the pairwise KEY table.
1256 * 0~3 to shared KEY table 0 (BSS0).
1257 * 4~7 to shared KEY table 1 (BSS1).
1258 * 8~11 to shared KEY table 2 (BSS2).
1259 * 12~15 to shared KEY table 3 (BSS3).
1260 * BURST: Next frame belongs to same "burst" event.
1261 */
1262#define TXD_W0_OWNER_NIC FIELD32(0x00000001)
1263#define TXD_W0_VALID FIELD32(0x00000002)
1264#define TXD_W0_MORE_FRAG FIELD32(0x00000004)
1265#define TXD_W0_ACK FIELD32(0x00000008)
1266#define TXD_W0_TIMESTAMP FIELD32(0x00000010)
1267#define TXD_W0_OFDM FIELD32(0x00000020)
1268#define TXD_W0_IFS FIELD32(0x00000040)
1269#define TXD_W0_RETRY_MODE FIELD32(0x00000080)
1270#define TXD_W0_TKIP_MIC FIELD32(0x00000100)
1271#define TXD_W0_KEY_TABLE FIELD32(0x00000200)
1272#define TXD_W0_KEY_INDEX FIELD32(0x0000fc00)
1273#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1274#define TXD_W0_BURST FIELD32(0x10000000)
1275#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1276
1277/*
1278 * Word1
1279 * HOST_Q_ID: EDCA/HCCA queue ID.
1280 * HW_SEQUENCE: MAC overwrites the frame sequence number.
1281 * BUFFER_COUNT: Number of buffers in this TXD.
1282 */
1283#define TXD_W1_HOST_Q_ID FIELD32(0x0000000f)
1284#define TXD_W1_AIFSN FIELD32(0x000000f0)
1285#define TXD_W1_CWMIN FIELD32(0x00000f00)
1286#define TXD_W1_CWMAX FIELD32(0x0000f000)
1287#define TXD_W1_IV_OFFSET FIELD32(0x003f0000)
1288#define TXD_W1_PIGGY_BACK FIELD32(0x01000000)
1289#define TXD_W1_HW_SEQUENCE FIELD32(0x10000000)
1290#define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000)
1291
1292/*
1293 * Word2: PLCP information
1294 */
1295#define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff)
1296#define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00)
1297#define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000)
1298#define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000)
1299
1300/*
1301 * Word3
1302 */
1303#define TXD_W3_IV FIELD32(0xffffffff)
1304
1305/*
1306 * Word4
1307 */
1308#define TXD_W4_EIV FIELD32(0xffffffff)
1309
1310/*
1311 * Word5
1312 * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field).
1313 * TXD_W5_PID_SUBTYPE: Driver assigned packet ID index for txdone handler.
1314 * TXD_W5_PID_TYPE: Driver assigned packet ID type for txdone handler.
1315 * WAITING_DMA_DONE_INT: TXD been filled with data
1316 * and waiting for TxDoneISR housekeeping.
1317 */
1318#define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff)
1319#define TXD_W5_PID_SUBTYPE FIELD32(0x00001f00)
1320#define TXD_W5_PID_TYPE FIELD32(0x0000e000)
1321#define TXD_W5_TX_POWER FIELD32(0x00ff0000)
1322#define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000)
1323
1324/*
1325 * the above 24-byte is called TXINFO and will be DMAed to MAC block
1326 * through TXFIFO. MAC block use this TXINFO to control the transmission
1327 * behavior of this frame.
1328 * The following fields are not used by MAC block.
1329 * They are used by DMA block and HOST driver only.
1330 * Once a frame has been DMA to ASIC, all the following fields are useless
1331 * to ASIC.
1332 */
1333
1334/*
1335 * Word6-10: Buffer physical address
1336 */
1337#define TXD_W6_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1338#define TXD_W7_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1339#define TXD_W8_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1340#define TXD_W9_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1341#define TXD_W10_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1342
1343/*
1344 * Word11-13: Buffer length
1345 */
1346#define TXD_W11_BUFFER_LENGTH0 FIELD32(0x00000fff)
1347#define TXD_W11_BUFFER_LENGTH1 FIELD32(0x0fff0000)
1348#define TXD_W12_BUFFER_LENGTH2 FIELD32(0x00000fff)
1349#define TXD_W12_BUFFER_LENGTH3 FIELD32(0x0fff0000)
1350#define TXD_W13_BUFFER_LENGTH4 FIELD32(0x00000fff)
1351
1352/*
1353 * Word14
1354 */
1355#define TXD_W14_SK_BUFFER FIELD32(0xffffffff)
1356
1357/*
1358 * Word15
1359 */
1360#define TXD_W15_NEXT_SK_BUFFER FIELD32(0xffffffff)
1361
1362/*
1363 * RX descriptor format for RX Ring.
1364 */
1365
1366/*
1367 * Word0
1368 * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key.
1369 * KEY_INDEX: Decryption key actually used.
1370 */
1371#define RXD_W0_OWNER_NIC FIELD32(0x00000001)
1372#define RXD_W0_DROP FIELD32(0x00000002)
1373#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004)
1374#define RXD_W0_MULTICAST FIELD32(0x00000008)
1375#define RXD_W0_BROADCAST FIELD32(0x00000010)
1376#define RXD_W0_MY_BSS FIELD32(0x00000020)
1377#define RXD_W0_CRC_ERROR FIELD32(0x00000040)
1378#define RXD_W0_OFDM FIELD32(0x00000080)
1379#define RXD_W0_CIPHER_ERROR FIELD32(0x00000300)
1380#define RXD_W0_KEY_INDEX FIELD32(0x0000fc00)
1381#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1382#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1383
1384/*
1385 * Word1
1386 * SIGNAL: RX raw data rate reported by BBP.
1387 */
1388#define RXD_W1_SIGNAL FIELD32(0x000000ff)
1389#define RXD_W1_RSSI_AGC FIELD32(0x00001f00)
1390#define RXD_W1_RSSI_LNA FIELD32(0x00006000)
1391#define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000)
1392
1393/*
1394 * Word2
1395 * IV: Received IV of originally encrypted.
1396 */
1397#define RXD_W2_IV FIELD32(0xffffffff)
1398
1399/*
1400 * Word3
1401 * EIV: Received EIV of originally encrypted.
1402 */
1403#define RXD_W3_EIV FIELD32(0xffffffff)
1404
1405/*
1406 * Word4
1407 */
1408#define RXD_W4_RESERVED FIELD32(0xffffffff)
1409
1410/*
1411 * the above 20-byte is called RXINFO and will be DMAed to MAC RX block
1412 * and passed to the HOST driver.
1413 * The following fields are for DMA block and HOST usage only.
1414 * Can't be touched by ASIC MAC block.
1415 */
1416
1417/*
1418 * Word5
1419 */
1420#define RXD_W5_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1421
1422/*
1423 * Word6-15: Reserved
1424 */
1425#define RXD_W6_RESERVED FIELD32(0xffffffff)
1426#define RXD_W7_RESERVED FIELD32(0xffffffff)
1427#define RXD_W8_RESERVED FIELD32(0xffffffff)
1428#define RXD_W9_RESERVED FIELD32(0xffffffff)
1429#define RXD_W10_RESERVED FIELD32(0xffffffff)
1430#define RXD_W11_RESERVED FIELD32(0xffffffff)
1431#define RXD_W12_RESERVED FIELD32(0xffffffff)
1432#define RXD_W13_RESERVED FIELD32(0xffffffff)
1433#define RXD_W14_RESERVED FIELD32(0xffffffff)
1434#define RXD_W15_RESERVED FIELD32(0xffffffff)
1435
1436/*
1437 * Macro's for converting txpower from EEPROM to dscape value
1438 * and from dscape value to register value.
1439 */
1440#define MIN_TXPOWER 0
1441#define MAX_TXPOWER 31
1442#define DEFAULT_TXPOWER 24
1443
1444#define TXPOWER_FROM_DEV(__txpower) \
1445({ \
1446 ((__txpower) > MAX_TXPOWER) ? \
1447 DEFAULT_TXPOWER : (__txpower); \
1448})
1449
1450#define TXPOWER_TO_DEV(__txpower) \
1451({ \
1452 ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
1453 (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
1454 (__txpower)); \
1455})
1456
1457#endif /* RT61PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
new file mode 100644
index 000000000000..b047c7c0f9ee
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -0,0 +1,2124 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt73usb
23 Abstract: rt73usb device specific routines.
24 Supported chipsets: rt2571W & rt2671.
25 */
26
27/*
28 * Set enviroment defines for rt2x00.h
29 */
30#define DRV_NAME "rt73usb"
31
32#include <linux/delay.h>
33#include <linux/etherdevice.h>
34#include <linux/init.h>
35#include <linux/kernel.h>
36#include <linux/module.h>
37#include <linux/usb.h>
38
39#include "rt2x00.h"
40#include "rt2x00usb.h"
41#include "rt73usb.h"
42
43/*
44 * Register access.
45 * All access to the CSR registers will go through the methods
46 * rt73usb_register_read and rt73usb_register_write.
47 * BBP and RF register require indirect register access,
48 * and use the CSR registers BBPCSR and RFCSR to achieve this.
49 * These indirect registers work with busy bits,
50 * and we will try maximal REGISTER_BUSY_COUNT times to access
51 * the register while taking a REGISTER_BUSY_DELAY us delay
52 * between each attampt. When the busy bit is still set at that time,
53 * the access attempt is considered to have failed,
54 * and we will print an error.
55 */
56static inline void rt73usb_register_read(const struct rt2x00_dev *rt2x00dev,
57 const unsigned int offset, u32 *value)
58{
59 __le32 reg;
60 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
61 USB_VENDOR_REQUEST_IN, offset,
62 &reg, sizeof(u32), REGISTER_TIMEOUT);
63 *value = le32_to_cpu(reg);
64}
65
66static inline void rt73usb_register_multiread(const struct rt2x00_dev
67 *rt2x00dev,
68 const unsigned int offset,
69 void *value, const u32 length)
70{
71 int timeout = REGISTER_TIMEOUT * (length / sizeof(u32));
72 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
73 USB_VENDOR_REQUEST_IN, offset,
74 value, length, timeout);
75}
76
77static inline void rt73usb_register_write(const struct rt2x00_dev *rt2x00dev,
78 const unsigned int offset, u32 value)
79{
80 __le32 reg = cpu_to_le32(value);
81 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
82 USB_VENDOR_REQUEST_OUT, offset,
83 &reg, sizeof(u32), REGISTER_TIMEOUT);
84}
85
86static inline void rt73usb_register_multiwrite(const struct rt2x00_dev
87 *rt2x00dev,
88 const unsigned int offset,
89 void *value, const u32 length)
90{
91 int timeout = REGISTER_TIMEOUT * (length / sizeof(u32));
92 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
93 USB_VENDOR_REQUEST_OUT, offset,
94 value, length, timeout);
95}
96
97static u32 rt73usb_bbp_check(const struct rt2x00_dev *rt2x00dev)
98{
99 u32 reg;
100 unsigned int i;
101
102 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
103 rt73usb_register_read(rt2x00dev, PHY_CSR3, &reg);
104 if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY))
105 break;
106 udelay(REGISTER_BUSY_DELAY);
107 }
108
109 return reg;
110}
111
112static void rt73usb_bbp_write(const struct rt2x00_dev *rt2x00dev,
113 const unsigned int word, const u8 value)
114{
115 u32 reg;
116
117 /*
118 * Wait until the BBP becomes ready.
119 */
120 reg = rt73usb_bbp_check(rt2x00dev);
121 if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
122 ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
123 return;
124 }
125
126 /*
127 * Write the data into the BBP.
128 */
129 reg = 0;
130 rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
131 rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
132 rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
133 rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 0);
134
135 rt73usb_register_write(rt2x00dev, PHY_CSR3, reg);
136}
137
138static void rt73usb_bbp_read(const struct rt2x00_dev *rt2x00dev,
139 const unsigned int word, u8 *value)
140{
141 u32 reg;
142
143 /*
144 * Wait until the BBP becomes ready.
145 */
146 reg = rt73usb_bbp_check(rt2x00dev);
147 if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
148 ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
149 return;
150 }
151
152 /*
153 * Write the request into the BBP.
154 */
155 reg = 0;
156 rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
157 rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
158 rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 1);
159
160 rt73usb_register_write(rt2x00dev, PHY_CSR3, reg);
161
162 /*
163 * Wait until the BBP becomes ready.
164 */
165 reg = rt73usb_bbp_check(rt2x00dev);
166 if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
167 ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
168 *value = 0xff;
169 return;
170 }
171
172 *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
173}
174
175static void rt73usb_rf_write(const struct rt2x00_dev *rt2x00dev,
176 const unsigned int word, const u32 value)
177{
178 u32 reg;
179 unsigned int i;
180
181 if (!word)
182 return;
183
184 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
185 rt73usb_register_read(rt2x00dev, PHY_CSR4, &reg);
186 if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY))
187 goto rf_write;
188 udelay(REGISTER_BUSY_DELAY);
189 }
190
191 ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n");
192 return;
193
194rf_write:
195 reg = 0;
196 rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
197
198 if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
199 rt2x00_rf(&rt2x00dev->chip, RF2527))
200 rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS, 21);
201 else
202 rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS, 20);
203
204 rt2x00_set_field32(&reg, PHY_CSR4_IF_SELECT, 0);
205 rt2x00_set_field32(&reg, PHY_CSR4_BUSY, 1);
206
207 rt73usb_register_write(rt2x00dev, PHY_CSR4, reg);
208 rt2x00_rf_write(rt2x00dev, word, value);
209}
210
211#ifdef CONFIG_RT2X00_LIB_DEBUGFS
212#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
213
214static void rt73usb_read_csr(const struct rt2x00_dev *rt2x00dev,
215 const unsigned int word, u32 *data)
216{
217 rt73usb_register_read(rt2x00dev, CSR_OFFSET(word), data);
218}
219
220static void rt73usb_write_csr(const struct rt2x00_dev *rt2x00dev,
221 const unsigned int word, u32 data)
222{
223 rt73usb_register_write(rt2x00dev, CSR_OFFSET(word), data);
224}
225
226static const struct rt2x00debug rt73usb_rt2x00debug = {
227 .owner = THIS_MODULE,
228 .csr = {
229 .read = rt73usb_read_csr,
230 .write = rt73usb_write_csr,
231 .word_size = sizeof(u32),
232 .word_count = CSR_REG_SIZE / sizeof(u32),
233 },
234 .eeprom = {
235 .read = rt2x00_eeprom_read,
236 .write = rt2x00_eeprom_write,
237 .word_size = sizeof(u16),
238 .word_count = EEPROM_SIZE / sizeof(u16),
239 },
240 .bbp = {
241 .read = rt73usb_bbp_read,
242 .write = rt73usb_bbp_write,
243 .word_size = sizeof(u8),
244 .word_count = BBP_SIZE / sizeof(u8),
245 },
246 .rf = {
247 .read = rt2x00_rf_read,
248 .write = rt73usb_rf_write,
249 .word_size = sizeof(u32),
250 .word_count = RF_SIZE / sizeof(u32),
251 },
252};
253#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
254
255/*
256 * Configuration handlers.
257 */
258static void rt73usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr)
259{
260 __le32 reg[2];
261 u32 tmp;
262
263 memset(&reg, 0, sizeof(reg));
264 memcpy(&reg, addr, ETH_ALEN);
265
266 tmp = le32_to_cpu(reg[1]);
267 rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
268 reg[1] = cpu_to_le32(tmp);
269
270 /*
271 * The MAC address is passed to us as an array of bytes,
272 * that array is little endian, so no need for byte ordering.
273 */
274 rt73usb_register_multiwrite(rt2x00dev, MAC_CSR2, &reg, sizeof(reg));
275}
276
277static void rt73usb_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
278{
279 __le32 reg[2];
280 u32 tmp;
281
282 memset(&reg, 0, sizeof(reg));
283 memcpy(&reg, bssid, ETH_ALEN);
284
285 tmp = le32_to_cpu(reg[1]);
286 rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3);
287 reg[1] = cpu_to_le32(tmp);
288
289 /*
290 * The BSSID is passed to us as an array of bytes,
291 * that array is little endian, so no need for byte ordering.
292 */
293 rt73usb_register_multiwrite(rt2x00dev, MAC_CSR4, &reg, sizeof(reg));
294}
295
296static void rt73usb_config_packet_filter(struct rt2x00_dev *rt2x00dev,
297 const unsigned int filter)
298{
299 int promisc = !!(filter & IFF_PROMISC);
300 int multicast = !!(filter & IFF_MULTICAST);
301 int broadcast = !!(filter & IFF_BROADCAST);
302 u32 reg;
303
304 rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
305 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME, !promisc);
306 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST, !multicast);
307 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BORADCAST, !broadcast);
308 rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
309}
310
311static void rt73usb_config_type(struct rt2x00_dev *rt2x00dev, const int type)
312{
313 u32 reg;
314
315 /*
316 * Clear current synchronisation setup.
317 * For the Beacon base registers we only need to clear
318 * the first byte since that byte contains the VALID and OWNER
319 * bits which (when set to 0) will invalidate the entire beacon.
320 */
321 rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0);
322 rt73usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
323 rt73usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
324 rt73usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
325 rt73usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
326
327 /*
328 * Apply hardware packet filter.
329 */
330 rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
331
332 if (!is_monitor_present(&rt2x00dev->interface) &&
333 (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
334 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS, 1);
335 else
336 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS, 0);
337
338 /*
339 * If there is a non-monitor interface present
340 * the packet should be strict (even if a monitor interface is present!).
341 * When there is only 1 interface present which is in monitor mode
342 * we should start accepting _all_ frames.
343 */
344 if (is_interface_present(&rt2x00dev->interface)) {
345 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC, 1);
346 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL, 1);
347 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL, 1);
348 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
349 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS, 1);
350 } else if (is_monitor_present(&rt2x00dev->interface)) {
351 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC, 0);
352 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL, 0);
353 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL, 0);
354 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 0);
355 rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS, 0);
356 }
357
358 rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
359
360 /*
361 * Enable synchronisation.
362 */
363 rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
364 if (is_interface_present(&rt2x00dev->interface)) {
365 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
366 rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
367 }
368
369 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
370 if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
371 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 2);
372 else if (type == IEEE80211_IF_TYPE_STA)
373 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 1);
374 else if (is_monitor_present(&rt2x00dev->interface) &&
375 !is_interface_present(&rt2x00dev->interface))
376 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 0);
377
378 rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
379}
380
381static void rt73usb_config_rate(struct rt2x00_dev *rt2x00dev, const int rate)
382{
383 struct ieee80211_conf *conf = &rt2x00dev->hw->conf;
384 u32 reg;
385 u32 value;
386 u32 preamble;
387
388 if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE))
389 preamble = SHORT_PREAMBLE;
390 else
391 preamble = PREAMBLE;
392
393 reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK;
394
395 rt73usb_register_write(rt2x00dev, TXRX_CSR5, reg);
396
397 rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
398 value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ?
399 SHORT_DIFS : DIFS) +
400 PLCP + preamble + get_duration(ACK_SIZE, 10);
401 rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, value);
402 rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
403
404 rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
405 if (preamble == SHORT_PREAMBLE)
406 rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE, 1);
407 else
408 rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE, 0);
409 rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
410}
411
412static void rt73usb_config_phymode(struct rt2x00_dev *rt2x00dev,
413 const int phymode)
414{
415 struct ieee80211_hw_mode *mode;
416 struct ieee80211_rate *rate;
417
418 if (phymode == MODE_IEEE80211A)
419 rt2x00dev->curr_hwmode = HWMODE_A;
420 else if (phymode == MODE_IEEE80211B)
421 rt2x00dev->curr_hwmode = HWMODE_B;
422 else
423 rt2x00dev->curr_hwmode = HWMODE_G;
424
425 mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
426 rate = &mode->rates[mode->num_rates - 1];
427
428 rt73usb_config_rate(rt2x00dev, rate->val2);
429}
430
431static void rt73usb_config_lock_channel(struct rt2x00_dev *rt2x00dev,
432 struct rf_channel *rf,
433 const int txpower)
434{
435 u8 r3;
436 u8 r94;
437 u8 smart;
438
439 rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
440 rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
441
442 smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
443 rt2x00_rf(&rt2x00dev->chip, RF2527));
444
445 rt73usb_bbp_read(rt2x00dev, 3, &r3);
446 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
447 rt73usb_bbp_write(rt2x00dev, 3, r3);
448
449 r94 = 6;
450 if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94))
451 r94 += txpower - MAX_TXPOWER;
452 else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94))
453 r94 += txpower;
454 rt73usb_bbp_write(rt2x00dev, 94, r94);
455
456 rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
457 rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
458 rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
459 rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
460
461 rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
462 rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
463 rt73usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
464 rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
465
466 rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
467 rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
468 rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
469 rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
470
471 udelay(10);
472}
473
474static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev,
475 const int index, const int channel,
476 const int txpower)
477{
478 struct rf_channel rf;
479
480 /*
481 * Fill rf_reg structure.
482 */
483 memcpy(&rf, &rt2x00dev->spec.channels[index], sizeof(rf));
484
485 rt73usb_config_lock_channel(rt2x00dev, &rf, txpower);
486}
487
488static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev,
489 const int txpower)
490{
491 struct rf_channel rf;
492
493 rt2x00_rf_read(rt2x00dev, 1, &rf.rf1);
494 rt2x00_rf_read(rt2x00dev, 2, &rf.rf2);
495 rt2x00_rf_read(rt2x00dev, 3, &rf.rf3);
496 rt2x00_rf_read(rt2x00dev, 4, &rf.rf4);
497
498 rt73usb_config_lock_channel(rt2x00dev, &rf, txpower);
499}
500
501static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
502 const int antenna_tx,
503 const int antenna_rx)
504{
505 u8 r3;
506 u8 r4;
507 u8 r77;
508
509 rt73usb_bbp_read(rt2x00dev, 3, &r3);
510 rt73usb_bbp_read(rt2x00dev, 4, &r4);
511 rt73usb_bbp_read(rt2x00dev, 77, &r77);
512
513 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
514
515 switch (antenna_rx) {
516 case ANTENNA_SW_DIVERSITY:
517 case ANTENNA_HW_DIVERSITY:
518 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
519 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
520 !!(rt2x00dev->curr_hwmode != HWMODE_A));
521 break;
522 case ANTENNA_A:
523 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
524 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
525
526 if (rt2x00dev->curr_hwmode == HWMODE_A)
527 rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
528 else
529 rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
530 break;
531 case ANTENNA_B:
532 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
533 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
534
535 if (rt2x00dev->curr_hwmode == HWMODE_A)
536 rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
537 else
538 rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
539 break;
540 }
541
542 rt73usb_bbp_write(rt2x00dev, 77, r77);
543 rt73usb_bbp_write(rt2x00dev, 3, r3);
544 rt73usb_bbp_write(rt2x00dev, 4, r4);
545}
546
547static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
548 const int antenna_tx,
549 const int antenna_rx)
550{
551 u8 r3;
552 u8 r4;
553 u8 r77;
554
555 rt73usb_bbp_read(rt2x00dev, 3, &r3);
556 rt73usb_bbp_read(rt2x00dev, 4, &r4);
557 rt73usb_bbp_read(rt2x00dev, 77, &r77);
558
559 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
560 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
561 !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
562
563 switch (antenna_rx) {
564 case ANTENNA_SW_DIVERSITY:
565 case ANTENNA_HW_DIVERSITY:
566 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2);
567 break;
568 case ANTENNA_A:
569 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
570 rt2x00_set_field8(&r77, BBP_R77_PAIR, 3);
571 break;
572 case ANTENNA_B:
573 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1);
574 rt2x00_set_field8(&r77, BBP_R77_PAIR, 0);
575 break;
576 }
577
578 rt73usb_bbp_write(rt2x00dev, 77, r77);
579 rt73usb_bbp_write(rt2x00dev, 3, r3);
580 rt73usb_bbp_write(rt2x00dev, 4, r4);
581}
582
583struct antenna_sel {
584 u8 word;
585 /*
586 * value[0] -> non-LNA
587 * value[1] -> LNA
588 */
589 u8 value[2];
590};
591
592static const struct antenna_sel antenna_sel_a[] = {
593 { 96, { 0x58, 0x78 } },
594 { 104, { 0x38, 0x48 } },
595 { 75, { 0xfe, 0x80 } },
596 { 86, { 0xfe, 0x80 } },
597 { 88, { 0xfe, 0x80 } },
598 { 35, { 0x60, 0x60 } },
599 { 97, { 0x58, 0x58 } },
600 { 98, { 0x58, 0x58 } },
601};
602
603static const struct antenna_sel antenna_sel_bg[] = {
604 { 96, { 0x48, 0x68 } },
605 { 104, { 0x2c, 0x3c } },
606 { 75, { 0xfe, 0x80 } },
607 { 86, { 0xfe, 0x80 } },
608 { 88, { 0xfe, 0x80 } },
609 { 35, { 0x50, 0x50 } },
610 { 97, { 0x48, 0x48 } },
611 { 98, { 0x48, 0x48 } },
612};
613
614static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
615 const int antenna_tx, const int antenna_rx)
616{
617 const struct antenna_sel *sel;
618 unsigned int lna;
619 unsigned int i;
620 u32 reg;
621
622 rt73usb_register_read(rt2x00dev, PHY_CSR0, &reg);
623
624 if (rt2x00dev->curr_hwmode == HWMODE_A) {
625 sel = antenna_sel_a;
626 lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
627
628 rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG, 0);
629 rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A, 1);
630 } else {
631 sel = antenna_sel_bg;
632 lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
633
634 rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG, 1);
635 rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A, 0);
636 }
637
638 for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
639 rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
640
641 rt73usb_register_write(rt2x00dev, PHY_CSR0, reg);
642
643 if (rt2x00_rf(&rt2x00dev->chip, RF5226) ||
644 rt2x00_rf(&rt2x00dev->chip, RF5225))
645 rt73usb_config_antenna_5x(rt2x00dev, antenna_tx, antenna_rx);
646 else if (rt2x00_rf(&rt2x00dev->chip, RF2528) ||
647 rt2x00_rf(&rt2x00dev->chip, RF2527))
648 rt73usb_config_antenna_2x(rt2x00dev, antenna_tx, antenna_rx);
649}
650
651static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev,
652 const int short_slot_time,
653 const int beacon_int)
654{
655 u32 reg;
656
657 rt73usb_register_read(rt2x00dev, MAC_CSR9, &reg);
658 rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME,
659 short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME);
660 rt73usb_register_write(rt2x00dev, MAC_CSR9, reg);
661
662 rt73usb_register_read(rt2x00dev, MAC_CSR8, &reg);
663 rt2x00_set_field32(&reg, MAC_CSR8_SIFS, SIFS);
664 rt2x00_set_field32(&reg, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3);
665 rt2x00_set_field32(&reg, MAC_CSR8_EIFS, EIFS);
666 rt73usb_register_write(rt2x00dev, MAC_CSR8, reg);
667
668 rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
669 rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
670 rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
671
672 rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
673 rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
674 rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
675
676 rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
677 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL, beacon_int * 16);
678 rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
679}
680
681static void rt73usb_config(struct rt2x00_dev *rt2x00dev,
682 const unsigned int flags,
683 struct ieee80211_conf *conf)
684{
685 int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME;
686
687 if (flags & CONFIG_UPDATE_PHYMODE)
688 rt73usb_config_phymode(rt2x00dev, conf->phymode);
689 if (flags & CONFIG_UPDATE_CHANNEL)
690 rt73usb_config_channel(rt2x00dev, conf->channel_val,
691 conf->channel, conf->power_level);
692 if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
693 rt73usb_config_txpower(rt2x00dev, conf->power_level);
694 if (flags & CONFIG_UPDATE_ANTENNA)
695 rt73usb_config_antenna(rt2x00dev, conf->antenna_sel_tx,
696 conf->antenna_sel_rx);
697 if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
698 rt73usb_config_duration(rt2x00dev, short_slot_time,
699 conf->beacon_int);
700}
701
702/*
703 * LED functions.
704 */
705static void rt73usb_enable_led(struct rt2x00_dev *rt2x00dev)
706{
707 u32 reg;
708
709 rt73usb_register_read(rt2x00dev, MAC_CSR14, &reg);
710 rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, 70);
711 rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, 30);
712 rt73usb_register_write(rt2x00dev, MAC_CSR14, reg);
713
714 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1);
715 if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A)
716 rt2x00_set_field16(&rt2x00dev->led_reg,
717 MCU_LEDCS_LINK_A_STATUS, 1);
718 else
719 rt2x00_set_field16(&rt2x00dev->led_reg,
720 MCU_LEDCS_LINK_BG_STATUS, 1);
721
722 rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000,
723 rt2x00dev->led_reg, REGISTER_TIMEOUT);
724}
725
726static void rt73usb_disable_led(struct rt2x00_dev *rt2x00dev)
727{
728 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 0);
729 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS, 0);
730 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS, 0);
731
732 rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000,
733 rt2x00dev->led_reg, REGISTER_TIMEOUT);
734}
735
736static void rt73usb_activity_led(struct rt2x00_dev *rt2x00dev, int rssi)
737{
738 u32 led;
739
740 if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH)
741 return;
742
743 /*
744 * Led handling requires a positive value for the rssi,
745 * to do that correctly we need to add the correction.
746 */
747 rssi += rt2x00dev->rssi_offset;
748
749 if (rssi <= 30)
750 led = 0;
751 else if (rssi <= 39)
752 led = 1;
753 else if (rssi <= 49)
754 led = 2;
755 else if (rssi <= 53)
756 led = 3;
757 else if (rssi <= 63)
758 led = 4;
759 else
760 led = 5;
761
762 rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, led,
763 rt2x00dev->led_reg, REGISTER_TIMEOUT);
764}
765
766/*
767 * Link tuning
768 */
769static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev)
770{
771 u32 reg;
772
773 /*
774 * Update FCS error count from register.
775 */
776 rt73usb_register_read(rt2x00dev, STA_CSR0, &reg);
777 rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR);
778
779 /*
780 * Update False CCA count from register.
781 */
782 rt73usb_register_read(rt2x00dev, STA_CSR1, &reg);
783 reg = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
784 rt2x00dev->link.false_cca =
785 rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
786}
787
788static void rt73usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
789{
790 rt73usb_bbp_write(rt2x00dev, 17, 0x20);
791 rt2x00dev->link.vgc_level = 0x20;
792}
793
794static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev)
795{
796 int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
797 u8 r17;
798 u8 up_bound;
799 u8 low_bound;
800
801 /*
802 * Update Led strength
803 */
804 rt73usb_activity_led(rt2x00dev, rssi);
805
806 rt73usb_bbp_read(rt2x00dev, 17, &r17);
807
808 /*
809 * Determine r17 bounds.
810 */
811 if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
812 low_bound = 0x28;
813 up_bound = 0x48;
814
815 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
816 low_bound += 0x10;
817 up_bound += 0x10;
818 }
819 } else {
820 if (rssi > -82) {
821 low_bound = 0x1c;
822 up_bound = 0x40;
823 } else if (rssi > -84) {
824 low_bound = 0x1c;
825 up_bound = 0x20;
826 } else {
827 low_bound = 0x1c;
828 up_bound = 0x1c;
829 }
830
831 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
832 low_bound += 0x14;
833 up_bound += 0x10;
834 }
835 }
836
837 /*
838 * Special big-R17 for very short distance
839 */
840 if (rssi > -35) {
841 if (r17 != 0x60)
842 rt73usb_bbp_write(rt2x00dev, 17, 0x60);
843 return;
844 }
845
846 /*
847 * Special big-R17 for short distance
848 */
849 if (rssi >= -58) {
850 if (r17 != up_bound)
851 rt73usb_bbp_write(rt2x00dev, 17, up_bound);
852 return;
853 }
854
855 /*
856 * Special big-R17 for middle-short distance
857 */
858 if (rssi >= -66) {
859 low_bound += 0x10;
860 if (r17 != low_bound)
861 rt73usb_bbp_write(rt2x00dev, 17, low_bound);
862 return;
863 }
864
865 /*
866 * Special mid-R17 for middle distance
867 */
868 if (rssi >= -74) {
869 if (r17 != (low_bound + 0x10))
870 rt73usb_bbp_write(rt2x00dev, 17, low_bound + 0x08);
871 return;
872 }
873
874 /*
875 * Special case: Change up_bound based on the rssi.
876 * Lower up_bound when rssi is weaker then -74 dBm.
877 */
878 up_bound -= 2 * (-74 - rssi);
879 if (low_bound > up_bound)
880 up_bound = low_bound;
881
882 if (r17 > up_bound) {
883 rt73usb_bbp_write(rt2x00dev, 17, up_bound);
884 return;
885 }
886
887 /*
888 * r17 does not yet exceed upper limit, continue and base
889 * the r17 tuning on the false CCA count.
890 */
891 if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) {
892 r17 += 4;
893 if (r17 > up_bound)
894 r17 = up_bound;
895 rt73usb_bbp_write(rt2x00dev, 17, r17);
896 } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) {
897 r17 -= 4;
898 if (r17 < low_bound)
899 r17 = low_bound;
900 rt73usb_bbp_write(rt2x00dev, 17, r17);
901 }
902}
903
904/*
905 * Firmware name function.
906 */
907static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
908{
909 return FIRMWARE_RT2571;
910}
911
912/*
913 * Initialization functions.
914 */
915static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
916 const size_t len)
917{
918 unsigned int i;
919 int status;
920 u32 reg;
921 char *ptr = data;
922 char *cache;
923 int buflen;
924 int timeout;
925
926 /*
927 * Wait for stable hardware.
928 */
929 for (i = 0; i < 100; i++) {
930 rt73usb_register_read(rt2x00dev, MAC_CSR0, &reg);
931 if (reg)
932 break;
933 msleep(1);
934 }
935
936 if (!reg) {
937 ERROR(rt2x00dev, "Unstable hardware.\n");
938 return -EBUSY;
939 }
940
941 /*
942 * Write firmware to device.
943 * We setup a seperate cache for this action,
944 * since we are going to write larger chunks of data
945 * then normally used cache size.
946 */
947 cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL);
948 if (!cache) {
949 ERROR(rt2x00dev, "Failed to allocate firmware cache.\n");
950 return -ENOMEM;
951 }
952
953 for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) {
954 buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE);
955 timeout = REGISTER_TIMEOUT * (buflen / sizeof(u32));
956
957 memcpy(cache, ptr, buflen);
958
959 rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
960 USB_VENDOR_REQUEST_OUT,
961 FIRMWARE_IMAGE_BASE + i, 0x0000,
962 cache, buflen, timeout);
963
964 ptr += buflen;
965 }
966
967 kfree(cache);
968
969 /*
970 * Send firmware request to device to load firmware,
971 * we need to specify a long timeout time.
972 */
973 status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
974 0x0000, USB_MODE_FIRMWARE,
975 REGISTER_TIMEOUT_FIRMWARE);
976 if (status < 0) {
977 ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
978 return status;
979 }
980
981 rt73usb_disable_led(rt2x00dev);
982
983 return 0;
984}
985
986static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
987{
988 u32 reg;
989
990 rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
991 rt2x00_set_field32(&reg, TXRX_CSR0_AUTO_TX_SEQ, 1);
992 rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
993 rt2x00_set_field32(&reg, TXRX_CSR0_TX_WITHOUT_WAITING, 0);
994 rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
995
996 rt73usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
997 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */
998 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0_VALID, 1);
999 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1, 30); /* Rssi */
1000 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1_VALID, 1);
1001 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */
1002 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2_VALID, 1);
1003 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3, 30); /* Rssi */
1004 rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3_VALID, 1);
1005 rt73usb_register_write(rt2x00dev, TXRX_CSR1, reg);
1006
1007 /*
1008 * CCK TXD BBP registers
1009 */
1010 rt73usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
1011 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0, 13);
1012 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0_VALID, 1);
1013 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1, 12);
1014 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1_VALID, 1);
1015 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2, 11);
1016 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2_VALID, 1);
1017 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3, 10);
1018 rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3_VALID, 1);
1019 rt73usb_register_write(rt2x00dev, TXRX_CSR2, reg);
1020
1021 /*
1022 * OFDM TXD BBP registers
1023 */
1024 rt73usb_register_read(rt2x00dev, TXRX_CSR3, &reg);
1025 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0, 7);
1026 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0_VALID, 1);
1027 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1, 6);
1028 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1_VALID, 1);
1029 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2, 5);
1030 rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2_VALID, 1);
1031 rt73usb_register_write(rt2x00dev, TXRX_CSR3, reg);
1032
1033 rt73usb_register_read(rt2x00dev, TXRX_CSR7, &reg);
1034 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_6MBS, 59);
1035 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_9MBS, 53);
1036 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_12MBS, 49);
1037 rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_18MBS, 46);
1038 rt73usb_register_write(rt2x00dev, TXRX_CSR7, reg);
1039
1040 rt73usb_register_read(rt2x00dev, TXRX_CSR8, &reg);
1041 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_24MBS, 44);
1042 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_36MBS, 42);
1043 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_48MBS, 42);
1044 rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
1045 rt73usb_register_write(rt2x00dev, TXRX_CSR8, reg);
1046
1047 rt73usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
1048
1049 rt73usb_register_read(rt2x00dev, MAC_CSR6, &reg);
1050 rt2x00_set_field32(&reg, MAC_CSR6_MAX_FRAME_UNIT, 0xfff);
1051 rt73usb_register_write(rt2x00dev, MAC_CSR6, reg);
1052
1053 rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718);
1054
1055 if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
1056 return -EBUSY;
1057
1058 rt73usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00);
1059
1060 /*
1061 * Invalidate all Shared Keys (SEC_CSR0),
1062 * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
1063 */
1064 rt73usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000);
1065 rt73usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000);
1066 rt73usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
1067
1068 reg = 0x000023b0;
1069 if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
1070 rt2x00_rf(&rt2x00dev->chip, RF2527))
1071 rt2x00_set_field32(&reg, PHY_CSR1_RF_RPI, 1);
1072 rt73usb_register_write(rt2x00dev, PHY_CSR1, reg);
1073
1074 rt73usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06);
1075 rt73usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
1076 rt73usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408);
1077
1078 rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
1079 rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC0_TX_OP, 0);
1080 rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC1_TX_OP, 0);
1081 rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
1082
1083 rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
1084 rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC2_TX_OP, 192);
1085 rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC3_TX_OP, 48);
1086 rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
1087
1088 rt73usb_register_read(rt2x00dev, MAC_CSR9, &reg);
1089 rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
1090 rt73usb_register_write(rt2x00dev, MAC_CSR9, reg);
1091
1092 /*
1093 * We must clear the error counters.
1094 * These registers are cleared on read,
1095 * so we may pass a useless variable to store the value.
1096 */
1097 rt73usb_register_read(rt2x00dev, STA_CSR0, &reg);
1098 rt73usb_register_read(rt2x00dev, STA_CSR1, &reg);
1099 rt73usb_register_read(rt2x00dev, STA_CSR2, &reg);
1100
1101 /*
1102 * Reset MAC and BBP registers.
1103 */
1104 rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1105 rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
1106 rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
1107 rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1108
1109 rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1110 rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
1111 rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
1112 rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1113
1114 rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1115 rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
1116 rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1117
1118 return 0;
1119}
1120
1121static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev)
1122{
1123 unsigned int i;
1124 u16 eeprom;
1125 u8 reg_id;
1126 u8 value;
1127
1128 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1129 rt73usb_bbp_read(rt2x00dev, 0, &value);
1130 if ((value != 0xff) && (value != 0x00))
1131 goto continue_csr_init;
1132 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
1133 udelay(REGISTER_BUSY_DELAY);
1134 }
1135
1136 ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
1137 return -EACCES;
1138
1139continue_csr_init:
1140 rt73usb_bbp_write(rt2x00dev, 3, 0x80);
1141 rt73usb_bbp_write(rt2x00dev, 15, 0x30);
1142 rt73usb_bbp_write(rt2x00dev, 21, 0xc8);
1143 rt73usb_bbp_write(rt2x00dev, 22, 0x38);
1144 rt73usb_bbp_write(rt2x00dev, 23, 0x06);
1145 rt73usb_bbp_write(rt2x00dev, 24, 0xfe);
1146 rt73usb_bbp_write(rt2x00dev, 25, 0x0a);
1147 rt73usb_bbp_write(rt2x00dev, 26, 0x0d);
1148 rt73usb_bbp_write(rt2x00dev, 32, 0x0b);
1149 rt73usb_bbp_write(rt2x00dev, 34, 0x12);
1150 rt73usb_bbp_write(rt2x00dev, 37, 0x07);
1151 rt73usb_bbp_write(rt2x00dev, 39, 0xf8);
1152 rt73usb_bbp_write(rt2x00dev, 41, 0x60);
1153 rt73usb_bbp_write(rt2x00dev, 53, 0x10);
1154 rt73usb_bbp_write(rt2x00dev, 54, 0x18);
1155 rt73usb_bbp_write(rt2x00dev, 60, 0x10);
1156 rt73usb_bbp_write(rt2x00dev, 61, 0x04);
1157 rt73usb_bbp_write(rt2x00dev, 62, 0x04);
1158 rt73usb_bbp_write(rt2x00dev, 75, 0xfe);
1159 rt73usb_bbp_write(rt2x00dev, 86, 0xfe);
1160 rt73usb_bbp_write(rt2x00dev, 88, 0xfe);
1161 rt73usb_bbp_write(rt2x00dev, 90, 0x0f);
1162 rt73usb_bbp_write(rt2x00dev, 99, 0x00);
1163 rt73usb_bbp_write(rt2x00dev, 102, 0x16);
1164 rt73usb_bbp_write(rt2x00dev, 107, 0x04);
1165
1166 DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
1167 for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1168 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1169
1170 if (eeprom != 0xffff && eeprom != 0x0000) {
1171 reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1172 value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1173 DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
1174 reg_id, value);
1175 rt73usb_bbp_write(rt2x00dev, reg_id, value);
1176 }
1177 }
1178 DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
1179
1180 return 0;
1181}
1182
1183/*
1184 * Device state switch handlers.
1185 */
1186static void rt73usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
1187 enum dev_state state)
1188{
1189 u32 reg;
1190
1191 rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
1192 rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
1193 state == STATE_RADIO_RX_OFF);
1194 rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
1195}
1196
1197static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev)
1198{
1199 /*
1200 * Initialize all registers.
1201 */
1202 if (rt73usb_init_registers(rt2x00dev) ||
1203 rt73usb_init_bbp(rt2x00dev)) {
1204 ERROR(rt2x00dev, "Register initialization failed.\n");
1205 return -EIO;
1206 }
1207
1208 rt2x00usb_enable_radio(rt2x00dev);
1209
1210 /*
1211 * Enable LED
1212 */
1213 rt73usb_enable_led(rt2x00dev);
1214
1215 return 0;
1216}
1217
1218static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev)
1219{
1220 /*
1221 * Disable LED
1222 */
1223 rt73usb_disable_led(rt2x00dev);
1224
1225 rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
1226
1227 /*
1228 * Disable synchronisation.
1229 */
1230 rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0);
1231
1232 rt2x00usb_disable_radio(rt2x00dev);
1233}
1234
1235static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
1236{
1237 u32 reg;
1238 unsigned int i;
1239 char put_to_sleep;
1240 char current_state;
1241
1242 put_to_sleep = (state != STATE_AWAKE);
1243
1244 rt73usb_register_read(rt2x00dev, MAC_CSR12, &reg);
1245 rt2x00_set_field32(&reg, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep);
1246 rt2x00_set_field32(&reg, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep);
1247 rt73usb_register_write(rt2x00dev, MAC_CSR12, reg);
1248
1249 /*
1250 * Device is not guaranteed to be in the requested state yet.
1251 * We must wait until the register indicates that the
1252 * device has entered the correct state.
1253 */
1254 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1255 rt73usb_register_read(rt2x00dev, MAC_CSR12, &reg);
1256 current_state =
1257 rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
1258 if (current_state == !put_to_sleep)
1259 return 0;
1260 msleep(10);
1261 }
1262
1263 NOTICE(rt2x00dev, "Device failed to enter state %d, "
1264 "current device state %d.\n", !put_to_sleep, current_state);
1265
1266 return -EBUSY;
1267}
1268
1269static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
1270 enum dev_state state)
1271{
1272 int retval = 0;
1273
1274 switch (state) {
1275 case STATE_RADIO_ON:
1276 retval = rt73usb_enable_radio(rt2x00dev);
1277 break;
1278 case STATE_RADIO_OFF:
1279 rt73usb_disable_radio(rt2x00dev);
1280 break;
1281 case STATE_RADIO_RX_ON:
1282 case STATE_RADIO_RX_OFF:
1283 rt73usb_toggle_rx(rt2x00dev, state);
1284 break;
1285 case STATE_DEEP_SLEEP:
1286 case STATE_SLEEP:
1287 case STATE_STANDBY:
1288 case STATE_AWAKE:
1289 retval = rt73usb_set_state(rt2x00dev, state);
1290 break;
1291 default:
1292 retval = -ENOTSUPP;
1293 break;
1294 }
1295
1296 return retval;
1297}
1298
1299/*
1300 * TX descriptor initialization
1301 */
1302static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1303 struct data_desc *txd,
1304 struct data_entry_desc *desc,
1305 struct ieee80211_hdr *ieee80211hdr,
1306 unsigned int length,
1307 struct ieee80211_tx_control *control)
1308{
1309 u32 word;
1310
1311 /*
1312 * Start writing the descriptor words.
1313 */
1314 rt2x00_desc_read(txd, 1, &word);
1315 rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue);
1316 rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs);
1317 rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min);
1318 rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max);
1319 rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
1320 rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
1321 rt2x00_desc_write(txd, 1, word);
1322
1323 rt2x00_desc_read(txd, 2, &word);
1324 rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal);
1325 rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service);
1326 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low);
1327 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high);
1328 rt2x00_desc_write(txd, 2, word);
1329
1330 rt2x00_desc_read(txd, 5, &word);
1331 rt2x00_set_field32(&word, TXD_W5_TX_POWER,
1332 TXPOWER_TO_DEV(control->power_level));
1333 rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
1334 rt2x00_desc_write(txd, 5, word);
1335
1336 rt2x00_desc_read(txd, 0, &word);
1337 rt2x00_set_field32(&word, TXD_W0_BURST,
1338 test_bit(ENTRY_TXD_BURST, &desc->flags));
1339 rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1340 rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1341 test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
1342 rt2x00_set_field32(&word, TXD_W0_ACK,
1343 !(control->flags & IEEE80211_TXCTL_NO_ACK));
1344 rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1345 test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
1346 rt2x00_set_field32(&word, TXD_W0_OFDM,
1347 test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags));
1348 rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
1349 rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1350 !!(control->flags &
1351 IEEE80211_TXCTL_LONG_RETRY_LIMIT));
1352 rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
1353 rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length);
1354 rt2x00_set_field32(&word, TXD_W0_BURST2,
1355 test_bit(ENTRY_TXD_BURST, &desc->flags));
1356 rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
1357 rt2x00_desc_write(txd, 0, word);
1358}
1359
1360/*
1361 * TX data initialization
1362 */
1363static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1364 unsigned int queue)
1365{
1366 u32 reg;
1367
1368 if (queue != IEEE80211_TX_QUEUE_BEACON)
1369 return;
1370
1371 /*
1372 * For Wi-Fi faily generated beacons between participating stations.
1373 * Set TBTT phase adaptive adjustment step to 8us (default 16us)
1374 */
1375 rt73usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
1376
1377 rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
1378 if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
1379 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
1380 rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1381 }
1382}
1383
1384/*
1385 * RX control handlers
1386 */
1387static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
1388{
1389 u16 eeprom;
1390 u8 offset;
1391 u8 lna;
1392
1393 lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
1394 switch (lna) {
1395 case 3:
1396 offset = 90;
1397 break;
1398 case 2:
1399 offset = 74;
1400 break;
1401 case 1:
1402 offset = 64;
1403 break;
1404 default:
1405 return 0;
1406 }
1407
1408 if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
1409 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
1410 if (lna == 3 || lna == 2)
1411 offset += 10;
1412 } else {
1413 if (lna == 3)
1414 offset += 6;
1415 else if (lna == 2)
1416 offset += 8;
1417 }
1418
1419 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
1420 offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
1421 } else {
1422 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
1423 offset += 14;
1424
1425 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
1426 offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
1427 }
1428
1429 return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
1430}
1431
1432static int rt73usb_fill_rxdone(struct data_entry *entry,
1433 int *signal, int *rssi, int *ofdm, int *size)
1434{
1435 struct data_desc *rxd = (struct data_desc *)entry->skb->data;
1436 u32 word0;
1437 u32 word1;
1438
1439 rt2x00_desc_read(rxd, 0, &word0);
1440 rt2x00_desc_read(rxd, 1, &word1);
1441
1442 if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
1443 rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
1444 return -EINVAL;
1445
1446 /*
1447 * Obtain the status about this packet.
1448 */
1449 *signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1450 *rssi = rt73usb_agc_to_rssi(entry->ring->rt2x00dev, word1);
1451 *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
1452 *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1453
1454 /*
1455 * Pull the skb to clear the descriptor area.
1456 */
1457 skb_pull(entry->skb, entry->ring->desc_size);
1458
1459 return 0;
1460}
1461
1462/*
1463 * Device probe functions.
1464 */
1465static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1466{
1467 u16 word;
1468 u8 *mac;
1469 s8 value;
1470
1471 rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1472
1473 /*
1474 * Start validation of the data that has been read.
1475 */
1476 mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1477 if (!is_valid_ether_addr(mac)) {
1478 random_ether_addr(mac);
1479 EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac));
1480 }
1481
1482 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1483 if (word == 0xffff) {
1484 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1485 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 2);
1486 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 2);
1487 rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
1488 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1489 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1490 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5226);
1491 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1492 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1493 }
1494
1495 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1496 if (word == 0xffff) {
1497 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA, 0);
1498 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1499 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1500 }
1501
1502 rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word);
1503 if (word == 0xffff) {
1504 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_G, 0);
1505 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_A, 0);
1506 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_ACT, 0);
1507 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_0, 0);
1508 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_1, 0);
1509 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_2, 0);
1510 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_3, 0);
1511 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_4, 0);
1512 rt2x00_set_field16(&word, EEPROM_LED_LED_MODE,
1513 LED_MODE_DEFAULT);
1514 rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word);
1515 EEPROM(rt2x00dev, "Led: 0x%04x\n", word);
1516 }
1517
1518 rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
1519 if (word == 0xffff) {
1520 rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
1521 rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0);
1522 rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
1523 EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
1524 }
1525
1526 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word);
1527 if (word == 0xffff) {
1528 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1529 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1530 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1531 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
1532 } else {
1533 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
1534 if (value < -10 || value > 10)
1535 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1536 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
1537 if (value < -10 || value > 10)
1538 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1539 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1540 }
1541
1542 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word);
1543 if (word == 0xffff) {
1544 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1545 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1546 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1547 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
1548 } else {
1549 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
1550 if (value < -10 || value > 10)
1551 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1552 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
1553 if (value < -10 || value > 10)
1554 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1555 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1556 }
1557
1558 return 0;
1559}
1560
1561static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1562{
1563 u32 reg;
1564 u16 value;
1565 u16 eeprom;
1566
1567 /*
1568 * Read EEPROM word for configuration.
1569 */
1570 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1571
1572 /*
1573 * Identify RF chipset.
1574 */
1575 value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1576 rt73usb_register_read(rt2x00dev, MAC_CSR0, &reg);
1577 rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
1578
1579 if (!rt2x00_rev(&rt2x00dev->chip, 0x25730)) {
1580 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1581 return -ENODEV;
1582 }
1583
1584 if (!rt2x00_rf(&rt2x00dev->chip, RF5226) &&
1585 !rt2x00_rf(&rt2x00dev->chip, RF2528) &&
1586 !rt2x00_rf(&rt2x00dev->chip, RF5225) &&
1587 !rt2x00_rf(&rt2x00dev->chip, RF2527)) {
1588 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1589 return -ENODEV;
1590 }
1591
1592 /*
1593 * Identify default antenna configuration.
1594 */
1595 rt2x00dev->hw->conf.antenna_sel_tx =
1596 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1597 rt2x00dev->hw->conf.antenna_sel_rx =
1598 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1599
1600 /*
1601 * Read the Frame type.
1602 */
1603 if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
1604 __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
1605
1606 /*
1607 * Read frequency offset.
1608 */
1609 rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
1610 rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
1611
1612 /*
1613 * Read external LNA informations.
1614 */
1615 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1616
1617 if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA)) {
1618 __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
1619 __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
1620 }
1621
1622 /*
1623 * Store led settings, for correct led behaviour.
1624 */
1625 rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
1626
1627 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE,
1628 rt2x00dev->led_mode);
1629 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0,
1630 rt2x00_get_field16(eeprom,
1631 EEPROM_LED_POLARITY_GPIO_0));
1632 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1,
1633 rt2x00_get_field16(eeprom,
1634 EEPROM_LED_POLARITY_GPIO_1));
1635 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2,
1636 rt2x00_get_field16(eeprom,
1637 EEPROM_LED_POLARITY_GPIO_2));
1638 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3,
1639 rt2x00_get_field16(eeprom,
1640 EEPROM_LED_POLARITY_GPIO_3));
1641 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4,
1642 rt2x00_get_field16(eeprom,
1643 EEPROM_LED_POLARITY_GPIO_4));
1644 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT,
1645 rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
1646 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG,
1647 rt2x00_get_field16(eeprom,
1648 EEPROM_LED_POLARITY_RDY_G));
1649 rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A,
1650 rt2x00_get_field16(eeprom,
1651 EEPROM_LED_POLARITY_RDY_A));
1652
1653 return 0;
1654}
1655
1656/*
1657 * RF value list for RF2528
1658 * Supports: 2.4 GHz
1659 */
1660static const struct rf_channel rf_vals_bg_2528[] = {
1661 { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1662 { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1663 { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
1664 { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
1665 { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
1666 { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
1667 { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
1668 { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
1669 { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
1670 { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
1671 { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
1672 { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
1673 { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
1674 { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
1675};
1676
1677/*
1678 * RF value list for RF5226
1679 * Supports: 2.4 GHz & 5.2 GHz
1680 */
1681static const struct rf_channel rf_vals_5226[] = {
1682 { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1683 { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1684 { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
1685 { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
1686 { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
1687 { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
1688 { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
1689 { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
1690 { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
1691 { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
1692 { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
1693 { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
1694 { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
1695 { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
1696
1697 /* 802.11 UNI / HyperLan 2 */
1698 { 36, 0x00002c0c, 0x0000099a, 0x00098255, 0x000fea23 },
1699 { 40, 0x00002c0c, 0x000009a2, 0x00098255, 0x000fea03 },
1700 { 44, 0x00002c0c, 0x000009a6, 0x00098255, 0x000fea0b },
1701 { 48, 0x00002c0c, 0x000009aa, 0x00098255, 0x000fea13 },
1702 { 52, 0x00002c0c, 0x000009ae, 0x00098255, 0x000fea1b },
1703 { 56, 0x00002c0c, 0x000009b2, 0x00098255, 0x000fea23 },
1704 { 60, 0x00002c0c, 0x000009ba, 0x00098255, 0x000fea03 },
1705 { 64, 0x00002c0c, 0x000009be, 0x00098255, 0x000fea0b },
1706
1707 /* 802.11 HyperLan 2 */
1708 { 100, 0x00002c0c, 0x00000a2a, 0x000b8255, 0x000fea03 },
1709 { 104, 0x00002c0c, 0x00000a2e, 0x000b8255, 0x000fea0b },
1710 { 108, 0x00002c0c, 0x00000a32, 0x000b8255, 0x000fea13 },
1711 { 112, 0x00002c0c, 0x00000a36, 0x000b8255, 0x000fea1b },
1712 { 116, 0x00002c0c, 0x00000a3a, 0x000b8255, 0x000fea23 },
1713 { 120, 0x00002c0c, 0x00000a82, 0x000b8255, 0x000fea03 },
1714 { 124, 0x00002c0c, 0x00000a86, 0x000b8255, 0x000fea0b },
1715 { 128, 0x00002c0c, 0x00000a8a, 0x000b8255, 0x000fea13 },
1716 { 132, 0x00002c0c, 0x00000a8e, 0x000b8255, 0x000fea1b },
1717 { 136, 0x00002c0c, 0x00000a92, 0x000b8255, 0x000fea23 },
1718
1719 /* 802.11 UNII */
1720 { 140, 0x00002c0c, 0x00000a9a, 0x000b8255, 0x000fea03 },
1721 { 149, 0x00002c0c, 0x00000aa2, 0x000b8255, 0x000fea1f },
1722 { 153, 0x00002c0c, 0x00000aa6, 0x000b8255, 0x000fea27 },
1723 { 157, 0x00002c0c, 0x00000aae, 0x000b8255, 0x000fea07 },
1724 { 161, 0x00002c0c, 0x00000ab2, 0x000b8255, 0x000fea0f },
1725 { 165, 0x00002c0c, 0x00000ab6, 0x000b8255, 0x000fea17 },
1726
1727 /* MMAC(Japan)J52 ch 34,38,42,46 */
1728 { 34, 0x00002c0c, 0x0008099a, 0x000da255, 0x000d3a0b },
1729 { 38, 0x00002c0c, 0x0008099e, 0x000da255, 0x000d3a13 },
1730 { 42, 0x00002c0c, 0x000809a2, 0x000da255, 0x000d3a1b },
1731 { 46, 0x00002c0c, 0x000809a6, 0x000da255, 0x000d3a23 },
1732};
1733
1734/*
1735 * RF value list for RF5225 & RF2527
1736 * Supports: 2.4 GHz & 5.2 GHz
1737 */
1738static const struct rf_channel rf_vals_5225_2527[] = {
1739 { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
1740 { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
1741 { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
1742 { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
1743 { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
1744 { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
1745 { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
1746 { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
1747 { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
1748 { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
1749 { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
1750 { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
1751 { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
1752 { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
1753
1754 /* 802.11 UNI / HyperLan 2 */
1755 { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
1756 { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
1757 { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
1758 { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
1759 { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
1760 { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
1761 { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
1762 { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },
1763
1764 /* 802.11 HyperLan 2 */
1765 { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
1766 { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
1767 { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
1768 { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
1769 { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
1770 { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
1771 { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
1772 { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
1773 { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
1774 { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },
1775
1776 /* 802.11 UNII */
1777 { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
1778 { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
1779 { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
1780 { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
1781 { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
1782 { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },
1783
1784 /* MMAC(Japan)J52 ch 34,38,42,46 */
1785 { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
1786 { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
1787 { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
1788 { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
1789};
1790
1791
1792static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1793{
1794 struct hw_mode_spec *spec = &rt2x00dev->spec;
1795 u8 *txpower;
1796 unsigned int i;
1797
1798 /*
1799 * Initialize all hw fields.
1800 */
1801 rt2x00dev->hw->flags =
1802 IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
1803 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1804 IEEE80211_HW_MONITOR_DURING_OPER |
1805 IEEE80211_HW_NO_PROBE_FILTERING;
1806 rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
1807 rt2x00dev->hw->max_signal = MAX_SIGNAL;
1808 rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1809 rt2x00dev->hw->queues = 5;
1810
1811 SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
1812 SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1813 rt2x00_eeprom_addr(rt2x00dev,
1814 EEPROM_MAC_ADDR_0));
1815
1816 /*
1817 * Convert tx_power array in eeprom.
1818 */
1819 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
1820 for (i = 0; i < 14; i++)
1821 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1822
1823 /*
1824 * Initialize hw_mode information.
1825 */
1826 spec->num_modes = 2;
1827 spec->num_rates = 12;
1828 spec->tx_power_a = NULL;
1829 spec->tx_power_bg = txpower;
1830 spec->tx_power_default = DEFAULT_TXPOWER;
1831
1832 if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
1833 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
1834 spec->channels = rf_vals_bg_2528;
1835 } else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) {
1836 spec->num_channels = ARRAY_SIZE(rf_vals_5226);
1837 spec->channels = rf_vals_5226;
1838 } else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) {
1839 spec->num_channels = 14;
1840 spec->channels = rf_vals_5225_2527;
1841 } else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) {
1842 spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527);
1843 spec->channels = rf_vals_5225_2527;
1844 }
1845
1846 if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
1847 rt2x00_rf(&rt2x00dev->chip, RF5226)) {
1848 spec->num_modes = 3;
1849
1850 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
1851 for (i = 0; i < 14; i++)
1852 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1853
1854 spec->tx_power_a = txpower;
1855 }
1856}
1857
1858static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
1859{
1860 int retval;
1861
1862 /*
1863 * Allocate eeprom data.
1864 */
1865 retval = rt73usb_validate_eeprom(rt2x00dev);
1866 if (retval)
1867 return retval;
1868
1869 retval = rt73usb_init_eeprom(rt2x00dev);
1870 if (retval)
1871 return retval;
1872
1873 /*
1874 * Initialize hw specifications.
1875 */
1876 rt73usb_probe_hw_mode(rt2x00dev);
1877
1878 /*
1879 * USB devices require scheduled packet filter toggling
1880 * This device requires firmware
1881 */
1882 __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags);
1883 __set_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags);
1884
1885 /*
1886 * Set the rssi offset.
1887 */
1888 rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1889
1890 return 0;
1891}
1892
1893/*
1894 * IEEE80211 stack callback functions.
1895 */
1896static int rt73usb_set_retry_limit(struct ieee80211_hw *hw,
1897 u32 short_retry, u32 long_retry)
1898{
1899 struct rt2x00_dev *rt2x00dev = hw->priv;
1900 u32 reg;
1901
1902 rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
1903 rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry);
1904 rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry);
1905 rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
1906
1907 return 0;
1908}
1909
1910#if 0
1911/*
1912 * Mac80211 demands get_tsf must be atomic.
1913 * This is not possible for rt73usb since all register access
1914 * functions require sleeping. Untill mac80211 no longer needs
1915 * get_tsf to be atomic, this function should be disabled.
1916 */
1917static u64 rt73usb_get_tsf(struct ieee80211_hw *hw)
1918{
1919 struct rt2x00_dev *rt2x00dev = hw->priv;
1920 u64 tsf;
1921 u32 reg;
1922
1923 rt73usb_register_read(rt2x00dev, TXRX_CSR13, &reg);
1924 tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
1925 rt73usb_register_read(rt2x00dev, TXRX_CSR12, &reg);
1926 tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
1927
1928 return tsf;
1929}
1930#endif
1931
1932static void rt73usb_reset_tsf(struct ieee80211_hw *hw)
1933{
1934 struct rt2x00_dev *rt2x00dev = hw->priv;
1935
1936 rt73usb_register_write(rt2x00dev, TXRX_CSR12, 0);
1937 rt73usb_register_write(rt2x00dev, TXRX_CSR13, 0);
1938}
1939
1940int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
1941 struct ieee80211_tx_control *control)
1942{
1943 struct rt2x00_dev *rt2x00dev = hw->priv;
1944 int timeout;
1945
1946 /*
1947 * Just in case the ieee80211 doesn't set this,
1948 * but we need this queue set for the descriptor
1949 * initialization.
1950 */
1951 control->queue = IEEE80211_TX_QUEUE_BEACON;
1952
1953 /*
1954 * First we create the beacon.
1955 */
1956 skb_push(skb, TXD_DESC_SIZE);
1957 rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data,
1958 (struct ieee80211_hdr *)(skb->data +
1959 TXD_DESC_SIZE),
1960 skb->len - TXD_DESC_SIZE, control);
1961
1962 /*
1963 * Write entire beacon with descriptor to register,
1964 * and kick the beacon generator.
1965 */
1966 timeout = REGISTER_TIMEOUT * (skb->len / sizeof(u32));
1967 rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
1968 USB_VENDOR_REQUEST_OUT,
1969 HW_BEACON_BASE0, 0x0000,
1970 skb->data, skb->len, timeout);
1971 rt73usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
1972
1973 return 0;
1974}
1975
1976static const struct ieee80211_ops rt73usb_mac80211_ops = {
1977 .tx = rt2x00mac_tx,
1978 .add_interface = rt2x00mac_add_interface,
1979 .remove_interface = rt2x00mac_remove_interface,
1980 .config = rt2x00mac_config,
1981 .config_interface = rt2x00mac_config_interface,
1982 .set_multicast_list = rt2x00mac_set_multicast_list,
1983 .get_stats = rt2x00mac_get_stats,
1984 .set_retry_limit = rt73usb_set_retry_limit,
1985 .conf_tx = rt2x00mac_conf_tx,
1986 .get_tx_stats = rt2x00mac_get_tx_stats,
1987#if 0
1988/*
1989 * See comment at the rt73usb_get_tsf function.
1990 */
1991 .get_tsf = rt73usb_get_tsf,
1992#endif
1993 .reset_tsf = rt73usb_reset_tsf,
1994 .beacon_update = rt73usb_beacon_update,
1995};
1996
1997static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
1998 .probe_hw = rt73usb_probe_hw,
1999 .get_firmware_name = rt73usb_get_firmware_name,
2000 .load_firmware = rt73usb_load_firmware,
2001 .initialize = rt2x00usb_initialize,
2002 .uninitialize = rt2x00usb_uninitialize,
2003 .set_device_state = rt73usb_set_device_state,
2004 .link_stats = rt73usb_link_stats,
2005 .reset_tuner = rt73usb_reset_tuner,
2006 .link_tuner = rt73usb_link_tuner,
2007 .write_tx_desc = rt73usb_write_tx_desc,
2008 .write_tx_data = rt2x00usb_write_tx_data,
2009 .kick_tx_queue = rt73usb_kick_tx_queue,
2010 .fill_rxdone = rt73usb_fill_rxdone,
2011 .config_mac_addr = rt73usb_config_mac_addr,
2012 .config_bssid = rt73usb_config_bssid,
2013 .config_packet_filter = rt73usb_config_packet_filter,
2014 .config_type = rt73usb_config_type,
2015 .config = rt73usb_config,
2016};
2017
2018static const struct rt2x00_ops rt73usb_ops = {
2019 .name = DRV_NAME,
2020 .rxd_size = RXD_DESC_SIZE,
2021 .txd_size = TXD_DESC_SIZE,
2022 .eeprom_size = EEPROM_SIZE,
2023 .rf_size = RF_SIZE,
2024 .lib = &rt73usb_rt2x00_ops,
2025 .hw = &rt73usb_mac80211_ops,
2026#ifdef CONFIG_RT2X00_LIB_DEBUGFS
2027 .debugfs = &rt73usb_rt2x00debug,
2028#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
2029};
2030
2031/*
2032 * rt73usb module information.
2033 */
2034static struct usb_device_id rt73usb_device_table[] = {
2035 /* AboCom */
2036 { USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
2037 /* Askey */
2038 { USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
2039 /* ASUS */
2040 { USB_DEVICE(0x0b05, 0x1723), USB_DEVICE_DATA(&rt73usb_ops) },
2041 { USB_DEVICE(0x0b05, 0x1724), USB_DEVICE_DATA(&rt73usb_ops) },
2042 /* Belkin */
2043 { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) },
2044 { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) },
2045 { USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) },
2046 /* Billionton */
2047 { USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
2048 /* Buffalo */
2049 { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
2050 /* CNet */
2051 { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
2052 { USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
2053 /* Conceptronic */
2054 { USB_DEVICE(0x14b2, 0x3c22), USB_DEVICE_DATA(&rt73usb_ops) },
2055 /* D-Link */
2056 { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) },
2057 { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
2058 /* Gemtek */
2059 { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
2060 /* Gigabyte */
2061 { USB_DEVICE(0x1044, 0x8008), USB_DEVICE_DATA(&rt73usb_ops) },
2062 { USB_DEVICE(0x1044, 0x800a), USB_DEVICE_DATA(&rt73usb_ops) },
2063 /* Huawei-3Com */
2064 { USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops) },
2065 /* Hercules */
2066 { USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops) },
2067 { USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops) },
2068 /* Linksys */
2069 { USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops) },
2070 { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
2071 /* MSI */
2072 { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
2073 { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
2074 { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
2075 { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
2076 /* Ralink */
2077 { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
2078 { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
2079 /* Qcom */
2080 { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
2081 { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
2082 { USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
2083 /* Senao */
2084 { USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
2085 /* Sitecom */
2086 { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
2087 { USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
2088 /* Surecom */
2089 { USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
2090 /* Planex */
2091 { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
2092 { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
2093 { 0, }
2094};
2095
2096MODULE_AUTHOR(DRV_PROJECT);
2097MODULE_VERSION(DRV_VERSION);
2098MODULE_DESCRIPTION("Ralink RT73 USB Wireless LAN driver.");
2099MODULE_SUPPORTED_DEVICE("Ralink RT2571W & RT2671 USB chipset based cards");
2100MODULE_DEVICE_TABLE(usb, rt73usb_device_table);
2101MODULE_FIRMWARE(FIRMWARE_RT2571);
2102MODULE_LICENSE("GPL");
2103
2104static struct usb_driver rt73usb_driver = {
2105 .name = DRV_NAME,
2106 .id_table = rt73usb_device_table,
2107 .probe = rt2x00usb_probe,
2108 .disconnect = rt2x00usb_disconnect,
2109 .suspend = rt2x00usb_suspend,
2110 .resume = rt2x00usb_resume,
2111};
2112
2113static int __init rt73usb_init(void)
2114{
2115 return usb_register(&rt73usb_driver);
2116}
2117
2118static void __exit rt73usb_exit(void)
2119{
2120 usb_deregister(&rt73usb_driver);
2121}
2122
2123module_init(rt73usb_init);
2124module_exit(rt73usb_exit);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
new file mode 100644
index 000000000000..5d63a1a714f3
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -0,0 +1,1024 @@
1/*
2 Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt73usb
23 Abstract: Data structures and registers for the rt73usb module.
24 Supported chipsets: rt2571W & rt2671.
25 */
26
27#ifndef RT73USB_H
28#define RT73USB_H
29
30/*
31 * RF chip defines.
32 */
33#define RF5226 0x0001
34#define RF2528 0x0002
35#define RF5225 0x0003
36#define RF2527 0x0004
37
38/*
39 * Signal information.
40 * Defaul offset is required for RSSI <-> dBm conversion.
41 */
42#define MAX_SIGNAL 100
43#define MAX_RX_SSI -1
44#define DEFAULT_RSSI_OFFSET 120
45
46/*
47 * Register layout information.
48 */
49#define CSR_REG_BASE 0x3000
50#define CSR_REG_SIZE 0x04b0
51#define EEPROM_BASE 0x0000
52#define EEPROM_SIZE 0x0100
53#define BBP_SIZE 0x0080
54#define RF_SIZE 0x0014
55
56/*
57 * USB registers.
58 */
59
60/*
61 * MCU_LEDCS: LED control for MCU Mailbox.
62 */
63#define MCU_LEDCS_LED_MODE FIELD16(0x001f)
64#define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020)
65#define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040)
66#define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080)
67#define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100)
68#define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200)
69#define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400)
70#define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800)
71#define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000)
72#define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000)
73#define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000)
74#define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000)
75
76/*
77 * 8051 firmware image.
78 */
79#define FIRMWARE_RT2571 "rt73.bin"
80#define FIRMWARE_IMAGE_BASE 0x0800
81
82/*
83 * Security key table memory.
84 * 16 entries 32-byte for shared key table
85 * 64 entries 32-byte for pairwise key table
86 * 64 entries 8-byte for pairwise ta key table
87 */
88#define SHARED_KEY_TABLE_BASE 0x1000
89#define PAIRWISE_KEY_TABLE_BASE 0x1200
90#define PAIRWISE_TA_TABLE_BASE 0x1a00
91
92struct hw_key_entry {
93 u8 key[16];
94 u8 tx_mic[8];
95 u8 rx_mic[8];
96} __attribute__ ((packed));
97
98struct hw_pairwise_ta_entry {
99 u8 address[6];
100 u8 reserved[2];
101} __attribute__ ((packed));
102
103/*
104 * Since NULL frame won't be that long (256 byte),
105 * We steal 16 tail bytes to save debugging settings.
106 */
107#define HW_DEBUG_SETTING_BASE 0x2bf0
108
109/*
110 * On-chip BEACON frame space.
111 */
112#define HW_BEACON_BASE0 0x2400
113#define HW_BEACON_BASE1 0x2500
114#define HW_BEACON_BASE2 0x2600
115#define HW_BEACON_BASE3 0x2700
116
117/*
118 * MAC Control/Status Registers(CSR).
119 * Some values are set in TU, whereas 1 TU == 1024 us.
120 */
121
122/*
123 * MAC_CSR0: ASIC revision number.
124 */
125#define MAC_CSR0 0x3000
126
127/*
128 * MAC_CSR1: System control register.
129 * SOFT_RESET: Software reset bit, 1: reset, 0: normal.
130 * BBP_RESET: Hardware reset BBP.
131 * HOST_READY: Host is ready after initialization, 1: ready.
132 */
133#define MAC_CSR1 0x3004
134#define MAC_CSR1_SOFT_RESET FIELD32(0x00000001)
135#define MAC_CSR1_BBP_RESET FIELD32(0x00000002)
136#define MAC_CSR1_HOST_READY FIELD32(0x00000004)
137
138/*
139 * MAC_CSR2: STA MAC register 0.
140 */
141#define MAC_CSR2 0x3008
142#define MAC_CSR2_BYTE0 FIELD32(0x000000ff)
143#define MAC_CSR2_BYTE1 FIELD32(0x0000ff00)
144#define MAC_CSR2_BYTE2 FIELD32(0x00ff0000)
145#define MAC_CSR2_BYTE3 FIELD32(0xff000000)
146
147/*
148 * MAC_CSR3: STA MAC register 1.
149 */
150#define MAC_CSR3 0x300c
151#define MAC_CSR3_BYTE4 FIELD32(0x000000ff)
152#define MAC_CSR3_BYTE5 FIELD32(0x0000ff00)
153#define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000)
154
155/*
156 * MAC_CSR4: BSSID register 0.
157 */
158#define MAC_CSR4 0x3010
159#define MAC_CSR4_BYTE0 FIELD32(0x000000ff)
160#define MAC_CSR4_BYTE1 FIELD32(0x0000ff00)
161#define MAC_CSR4_BYTE2 FIELD32(0x00ff0000)
162#define MAC_CSR4_BYTE3 FIELD32(0xff000000)
163
164/*
165 * MAC_CSR5: BSSID register 1.
166 * BSS_ID_MASK: 3: one BSSID, 0: 4 BSSID, 2 or 1: 2 BSSID.
167 */
168#define MAC_CSR5 0x3014
169#define MAC_CSR5_BYTE4 FIELD32(0x000000ff)
170#define MAC_CSR5_BYTE5 FIELD32(0x0000ff00)
171#define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000)
172
173/*
174 * MAC_CSR6: Maximum frame length register.
175 */
176#define MAC_CSR6 0x3018
177#define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff)
178
179/*
180 * MAC_CSR7: Reserved
181 */
182#define MAC_CSR7 0x301c
183
184/*
185 * MAC_CSR8: SIFS/EIFS register.
186 * All units are in US.
187 */
188#define MAC_CSR8 0x3020
189#define MAC_CSR8_SIFS FIELD32(0x000000ff)
190#define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00)
191#define MAC_CSR8_EIFS FIELD32(0xffff0000)
192
193/*
194 * MAC_CSR9: Back-Off control register.
195 * SLOT_TIME: Slot time, default is 20us for 802.11BG.
196 * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1).
197 * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1).
198 * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD.
199 */
200#define MAC_CSR9 0x3024
201#define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff)
202#define MAC_CSR9_CWMIN FIELD32(0x00000f00)
203#define MAC_CSR9_CWMAX FIELD32(0x0000f000)
204#define MAC_CSR9_CW_SELECT FIELD32(0x00010000)
205
206/*
207 * MAC_CSR10: Power state configuration.
208 */
209#define MAC_CSR10 0x3028
210
211/*
212 * MAC_CSR11: Power saving transition time register.
213 * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU.
214 * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
215 * WAKEUP_LATENCY: In unit of TU.
216 */
217#define MAC_CSR11 0x302c
218#define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff)
219#define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00)
220#define MAC_CSR11_AUTOWAKE FIELD32(0x00008000)
221#define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000)
222
223/*
224 * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1).
225 * CURRENT_STATE: 0:sleep, 1:awake.
226 * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP.
227 * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake.
228 */
229#define MAC_CSR12 0x3030
230#define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001)
231#define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002)
232#define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004)
233#define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008)
234
235/*
236 * MAC_CSR13: GPIO.
237 */
238#define MAC_CSR13 0x3034
239
240/*
241 * MAC_CSR14: LED control register.
242 * ON_PERIOD: On period, default 70ms.
243 * OFF_PERIOD: Off period, default 30ms.
244 * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON.
245 * SW_LED: s/w LED, 1: ON, 0: OFF.
246 * HW_LED_POLARITY: 0: active low, 1: active high.
247 */
248#define MAC_CSR14 0x3038
249#define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff)
250#define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00)
251#define MAC_CSR14_HW_LED FIELD32(0x00010000)
252#define MAC_CSR14_SW_LED FIELD32(0x00020000)
253#define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000)
254#define MAC_CSR14_SW_LED2 FIELD32(0x00080000)
255
256/*
257 * MAC_CSR15: NAV control.
258 */
259#define MAC_CSR15 0x303c
260
261/*
262 * TXRX control registers.
263 * Some values are set in TU, whereas 1 TU == 1024 us.
264 */
265
266/*
267 * TXRX_CSR0: TX/RX configuration register.
268 * TSF_OFFSET: Default is 24.
269 * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame.
270 * DISABLE_RX: Disable Rx engine.
271 * DROP_CRC: Drop CRC error.
272 * DROP_PHYSICAL: Drop physical error.
273 * DROP_CONTROL: Drop control frame.
274 * DROP_NOT_TO_ME: Drop not to me unicast frame.
275 * DROP_TO_DS: Drop fram ToDs bit is true.
276 * DROP_VERSION_ERROR: Drop version error frame.
277 * DROP_MULTICAST: Drop multicast frames.
278 * DROP_BORADCAST: Drop broadcast frames.
279 * ROP_ACK_CTS: Drop received ACK and CTS.
280 */
281#define TXRX_CSR0 0x3040
282#define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff)
283#define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00)
284#define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000)
285#define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000)
286#define TXRX_CSR0_DROP_CRC FIELD32(0x00020000)
287#define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000)
288#define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000)
289#define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000)
290#define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000)
291#define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000)
292#define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000)
293#define TXRX_CSR0_DROP_BORADCAST FIELD32(0x01000000)
294#define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000)
295#define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000)
296
297/*
298 * TXRX_CSR1
299 */
300#define TXRX_CSR1 0x3044
301#define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f)
302#define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080)
303#define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00)
304#define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000)
305#define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000)
306#define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000)
307#define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000)
308#define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000)
309
310/*
311 * TXRX_CSR2
312 */
313#define TXRX_CSR2 0x3048
314#define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f)
315#define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080)
316#define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00)
317#define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000)
318#define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000)
319#define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000)
320#define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000)
321#define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000)
322
323/*
324 * TXRX_CSR3
325 */
326#define TXRX_CSR3 0x304c
327#define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f)
328#define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080)
329#define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00)
330#define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000)
331#define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000)
332#define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000)
333#define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000)
334#define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000)
335
336/*
337 * TXRX_CSR4: Auto-Responder/Tx-retry register.
338 * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble.
339 * OFDM_TX_RATE_DOWN: 1:enable.
340 * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step.
341 * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M.
342 */
343#define TXRX_CSR4 0x3050
344#define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff)
345#define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700)
346#define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000)
347#define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000)
348#define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000)
349#define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000)
350#define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000)
351#define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000)
352#define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000)
353#define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000)
354
355/*
356 * TXRX_CSR5
357 */
358#define TXRX_CSR5 0x3054
359
360/*
361 * TXRX_CSR6: ACK/CTS payload consumed time
362 */
363#define TXRX_CSR6 0x3058
364
365/*
366 * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps.
367 */
368#define TXRX_CSR7 0x305c
369#define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff)
370#define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00)
371#define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000)
372#define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000)
373
374/*
375 * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps.
376 */
377#define TXRX_CSR8 0x3060
378#define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff)
379#define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00)
380#define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000)
381#define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000)
382
383/*
384 * TXRX_CSR9: Synchronization control register.
385 * BEACON_INTERVAL: In unit of 1/16 TU.
386 * TSF_TICKING: Enable TSF auto counting.
387 * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
388 * BEACON_GEN: Enable beacon generator.
389 */
390#define TXRX_CSR9 0x3064
391#define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff)
392#define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000)
393#define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000)
394#define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000)
395#define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000)
396#define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000)
397
398/*
399 * TXRX_CSR10: BEACON alignment.
400 */
401#define TXRX_CSR10 0x3068
402
403/*
404 * TXRX_CSR11: AES mask.
405 */
406#define TXRX_CSR11 0x306c
407
408/*
409 * TXRX_CSR12: TSF low 32.
410 */
411#define TXRX_CSR12 0x3070
412#define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff)
413
414/*
415 * TXRX_CSR13: TSF high 32.
416 */
417#define TXRX_CSR13 0x3074
418#define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff)
419
420/*
421 * TXRX_CSR14: TBTT timer.
422 */
423#define TXRX_CSR14 0x3078
424
425/*
426 * TXRX_CSR15: TKIP MIC priority byte "AND" mask.
427 */
428#define TXRX_CSR15 0x307c
429
430/*
431 * PHY control registers.
432 * Some values are set in TU, whereas 1 TU == 1024 us.
433 */
434
435/*
436 * PHY_CSR0: RF/PS control.
437 */
438#define PHY_CSR0 0x3080
439#define PHY_CSR0_PA_PE_BG FIELD32(0x00010000)
440#define PHY_CSR0_PA_PE_A FIELD32(0x00020000)
441
442/*
443 * PHY_CSR1
444 */
445#define PHY_CSR1 0x3084
446#define PHY_CSR1_RF_RPI FIELD32(0x00010000)
447
448/*
449 * PHY_CSR2: Pre-TX BBP control.
450 */
451#define PHY_CSR2 0x3088
452
453/*
454 * PHY_CSR3: BBP serial control register.
455 * VALUE: Register value to program into BBP.
456 * REG_NUM: Selected BBP register.
457 * READ_CONTROL: 0: Write BBP, 1: Read BBP.
458 * BUSY: 1: ASIC is busy execute BBP programming.
459 */
460#define PHY_CSR3 0x308c
461#define PHY_CSR3_VALUE FIELD32(0x000000ff)
462#define PHY_CSR3_REGNUM FIELD32(0x00007f00)
463#define PHY_CSR3_READ_CONTROL FIELD32(0x00008000)
464#define PHY_CSR3_BUSY FIELD32(0x00010000)
465
466/*
467 * PHY_CSR4: RF serial control register
468 * VALUE: Register value (include register id) serial out to RF/IF chip.
469 * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22).
470 * IF_SELECT: 1: select IF to program, 0: select RF to program.
471 * PLL_LD: RF PLL_LD status.
472 * BUSY: 1: ASIC is busy execute RF programming.
473 */
474#define PHY_CSR4 0x3090
475#define PHY_CSR4_VALUE FIELD32(0x00ffffff)
476#define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000)
477#define PHY_CSR4_IF_SELECT FIELD32(0x20000000)
478#define PHY_CSR4_PLL_LD FIELD32(0x40000000)
479#define PHY_CSR4_BUSY FIELD32(0x80000000)
480
481/*
482 * PHY_CSR5: RX to TX signal switch timing control.
483 */
484#define PHY_CSR5 0x3094
485#define PHY_CSR5_IQ_FLIP FIELD32(0x00000004)
486
487/*
488 * PHY_CSR6: TX to RX signal timing control.
489 */
490#define PHY_CSR6 0x3098
491#define PHY_CSR6_IQ_FLIP FIELD32(0x00000004)
492
493/*
494 * PHY_CSR7: TX DAC switching timing control.
495 */
496#define PHY_CSR7 0x309c
497
498/*
499 * Security control register.
500 */
501
502/*
503 * SEC_CSR0: Shared key table control.
504 */
505#define SEC_CSR0 0x30a0
506#define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001)
507#define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002)
508#define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004)
509#define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008)
510#define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010)
511#define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020)
512#define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040)
513#define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080)
514#define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100)
515#define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200)
516#define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400)
517#define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800)
518#define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000)
519#define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000)
520#define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000)
521#define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000)
522
523/*
524 * SEC_CSR1: Shared key table security mode register.
525 */
526#define SEC_CSR1 0x30a4
527#define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007)
528#define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070)
529#define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700)
530#define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000)
531#define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000)
532#define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000)
533#define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000)
534#define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000)
535
536/*
537 * Pairwise key table valid bitmap registers.
538 * SEC_CSR2: pairwise key table valid bitmap 0.
539 * SEC_CSR3: pairwise key table valid bitmap 1.
540 */
541#define SEC_CSR2 0x30a8
542#define SEC_CSR3 0x30ac
543
544/*
545 * SEC_CSR4: Pairwise key table lookup control.
546 */
547#define SEC_CSR4 0x30b0
548
549/*
550 * SEC_CSR5: shared key table security mode register.
551 */
552#define SEC_CSR5 0x30b4
553#define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007)
554#define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070)
555#define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700)
556#define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000)
557#define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000)
558#define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000)
559#define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000)
560#define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000)
561
562/*
563 * STA control registers.
564 */
565
566/*
567 * STA_CSR0: RX PLCP error count & RX FCS error count.
568 */
569#define STA_CSR0 0x30c0
570#define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff)
571#define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000)
572
573/*
574 * STA_CSR1: RX False CCA count & RX LONG frame count.
575 */
576#define STA_CSR1 0x30c4
577#define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff)
578#define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000)
579
580/*
581 * STA_CSR2: TX Beacon count and RX FIFO overflow count.
582 */
583#define STA_CSR2 0x30c8
584#define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff)
585#define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000)
586
587/*
588 * STA_CSR3: TX Beacon count.
589 */
590#define STA_CSR3 0x30cc
591#define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff)
592
593/*
594 * STA_CSR4: TX Retry count.
595 */
596#define STA_CSR4 0x30d0
597#define STA_CSR4_TX_NO_RETRY_COUNT FIELD32(0x0000ffff)
598#define STA_CSR4_TX_ONE_RETRY_COUNT FIELD32(0xffff0000)
599
600/*
601 * STA_CSR5: TX Retry count.
602 */
603#define STA_CSR5 0x30d4
604#define STA_CSR4_TX_MULTI_RETRY_COUNT FIELD32(0x0000ffff)
605#define STA_CSR4_TX_RETRY_FAIL_COUNT FIELD32(0xffff0000)
606
607/*
608 * QOS control registers.
609 */
610
611/*
612 * QOS_CSR1: TXOP holder MAC address register.
613 */
614#define QOS_CSR1 0x30e4
615#define QOS_CSR1_BYTE4 FIELD32(0x000000ff)
616#define QOS_CSR1_BYTE5 FIELD32(0x0000ff00)
617
618/*
619 * QOS_CSR2: TXOP holder timeout register.
620 */
621#define QOS_CSR2 0x30e8
622
623/*
624 * RX QOS-CFPOLL MAC address register.
625 * QOS_CSR3: RX QOS-CFPOLL MAC address 0.
626 * QOS_CSR4: RX QOS-CFPOLL MAC address 1.
627 */
628#define QOS_CSR3 0x30ec
629#define QOS_CSR4 0x30f0
630
631/*
632 * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL.
633 */
634#define QOS_CSR5 0x30f4
635
636/*
637 * WMM Scheduler Register
638 */
639
640/*
641 * AIFSN_CSR: AIFSN for each EDCA AC.
642 * AIFSN0: For AC_BK.
643 * AIFSN1: For AC_BE.
644 * AIFSN2: For AC_VI.
645 * AIFSN3: For AC_VO.
646 */
647#define AIFSN_CSR 0x0400
648#define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f)
649#define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0)
650#define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00)
651#define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000)
652
653/*
654 * CWMIN_CSR: CWmin for each EDCA AC.
655 * CWMIN0: For AC_BK.
656 * CWMIN1: For AC_BE.
657 * CWMIN2: For AC_VI.
658 * CWMIN3: For AC_VO.
659 */
660#define CWMIN_CSR 0x0404
661#define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f)
662#define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0)
663#define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00)
664#define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000)
665
666/*
667 * CWMAX_CSR: CWmax for each EDCA AC.
668 * CWMAX0: For AC_BK.
669 * CWMAX1: For AC_BE.
670 * CWMAX2: For AC_VI.
671 * CWMAX3: For AC_VO.
672 */
673#define CWMAX_CSR 0x0408
674#define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f)
675#define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0)
676#define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00)
677#define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000)
678
679/*
680 * AC_TXOP_CSR0: AC_BK/AC_BE TXOP register.
681 * AC0_TX_OP: For AC_BK, in unit of 32us.
682 * AC1_TX_OP: For AC_BE, in unit of 32us.
683 */
684#define AC_TXOP_CSR0 0x040c
685#define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff)
686#define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000)
687
688/*
689 * AC_TXOP_CSR1: AC_VO/AC_VI TXOP register.
690 * AC2_TX_OP: For AC_VI, in unit of 32us.
691 * AC3_TX_OP: For AC_VO, in unit of 32us.
692 */
693#define AC_TXOP_CSR1 0x0410
694#define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff)
695#define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000)
696
697/*
698 * BBP registers.
699 * The wordsize of the BBP is 8 bits.
700 */
701
702/*
703 * R2
704 */
705#define BBP_R2_BG_MODE FIELD8(0x20)
706
707/*
708 * R3
709 */
710#define BBP_R3_SMART_MODE FIELD8(0x01)
711
712/*
713 * R4: RX antenna control
714 * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529)
715 */
716#define BBP_R4_RX_ANTENNA FIELD8(0x03)
717#define BBP_R4_RX_FRAME_END FIELD8(0x20)
718
719/*
720 * R77
721 */
722#define BBP_R77_PAIR FIELD8(0x03)
723
724/*
725 * RF registers
726 */
727
728/*
729 * RF 3
730 */
731#define RF3_TXPOWER FIELD32(0x00003e00)
732
733/*
734 * RF 4
735 */
736#define RF4_FREQ_OFFSET FIELD32(0x0003f000)
737
738/*
739 * EEPROM content.
740 * The wordsize of the EEPROM is 16 bits.
741 */
742
743/*
744 * HW MAC address.
745 */
746#define EEPROM_MAC_ADDR_0 0x0002
747#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
748#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
749#define EEPROM_MAC_ADDR1 0x0003
750#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
751#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
752#define EEPROM_MAC_ADDR_2 0x0004
753#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
754#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
755
756/*
757 * EEPROM antenna.
758 * ANTENNA_NUM: Number of antenna's.
759 * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
760 * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
761 * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only.
762 * DYN_TXAGC: Dynamic TX AGC control.
763 * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
764 * RF_TYPE: Rf_type of this adapter.
765 */
766#define EEPROM_ANTENNA 0x0010
767#define EEPROM_ANTENNA_NUM FIELD16(0x0003)
768#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
769#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
770#define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040)
771#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200)
772#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
773#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800)
774
775/*
776 * EEPROM NIC config.
777 * EXTERNAL_LNA: External LNA.
778 */
779#define EEPROM_NIC 0x0011
780#define EEPROM_NIC_EXTERNAL_LNA FIELD16(0x0010)
781
782/*
783 * EEPROM geography.
784 * GEO_A: Default geographical setting for 5GHz band
785 * GEO: Default geographical setting.
786 */
787#define EEPROM_GEOGRAPHY 0x0012
788#define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff)
789#define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00)
790
791/*
792 * EEPROM BBP.
793 */
794#define EEPROM_BBP_START 0x0013
795#define EEPROM_BBP_SIZE 16
796#define EEPROM_BBP_VALUE FIELD16(0x00ff)
797#define EEPROM_BBP_REG_ID FIELD16(0xff00)
798
799/*
800 * EEPROM TXPOWER 802.11G
801 */
802#define EEPROM_TXPOWER_G_START 0x0023
803#define EEPROM_TXPOWER_G_SIZE 7
804#define EEPROM_TXPOWER_G_1 FIELD16(0x00ff)
805#define EEPROM_TXPOWER_G_2 FIELD16(0xff00)
806
807/*
808 * EEPROM Frequency
809 */
810#define EEPROM_FREQ 0x002f
811#define EEPROM_FREQ_OFFSET FIELD16(0x00ff)
812#define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00)
813#define EEPROM_FREQ_SEQ FIELD16(0x0300)
814
815/*
816 * EEPROM LED.
817 * POLARITY_RDY_G: Polarity RDY_G setting.
818 * POLARITY_RDY_A: Polarity RDY_A setting.
819 * POLARITY_ACT: Polarity ACT setting.
820 * POLARITY_GPIO_0: Polarity GPIO0 setting.
821 * POLARITY_GPIO_1: Polarity GPIO1 setting.
822 * POLARITY_GPIO_2: Polarity GPIO2 setting.
823 * POLARITY_GPIO_3: Polarity GPIO3 setting.
824 * POLARITY_GPIO_4: Polarity GPIO4 setting.
825 * LED_MODE: Led mode.
826 */
827#define EEPROM_LED 0x0030
828#define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001)
829#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
830#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
831#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008)
832#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010)
833#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020)
834#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040)
835#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080)
836#define EEPROM_LED_LED_MODE FIELD16(0x1f00)
837
838/*
839 * EEPROM TXPOWER 802.11A
840 */
841#define EEPROM_TXPOWER_A_START 0x0031
842#define EEPROM_TXPOWER_A_SIZE 12
843#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
844#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
845
846/*
847 * EEPROM RSSI offset 802.11BG
848 */
849#define EEPROM_RSSI_OFFSET_BG 0x004d
850#define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff)
851#define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00)
852
853/*
854 * EEPROM RSSI offset 802.11A
855 */
856#define EEPROM_RSSI_OFFSET_A 0x004e
857#define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff)
858#define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00)
859
860/*
861 * DMA descriptor defines.
862 */
863#define TXD_DESC_SIZE ( 6 * sizeof(struct data_desc) )
864#define RXD_DESC_SIZE ( 6 * sizeof(struct data_desc) )
865
866/*
867 * TX descriptor format for TX, PRIO and Beacon Ring.
868 */
869
870/*
871 * Word0
872 * BURST: Next frame belongs to same "burst" event.
873 * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used.
874 * KEY_TABLE: Use per-client pairwise KEY table.
875 * KEY_INDEX:
876 * Key index (0~31) to the pairwise KEY table.
877 * 0~3 to shared KEY table 0 (BSS0).
878 * 4~7 to shared KEY table 1 (BSS1).
879 * 8~11 to shared KEY table 2 (BSS2).
880 * 12~15 to shared KEY table 3 (BSS3).
881 * BURST2: For backward compatibility, set to same value as BURST.
882 */
883#define TXD_W0_BURST FIELD32(0x00000001)
884#define TXD_W0_VALID FIELD32(0x00000002)
885#define TXD_W0_MORE_FRAG FIELD32(0x00000004)
886#define TXD_W0_ACK FIELD32(0x00000008)
887#define TXD_W0_TIMESTAMP FIELD32(0x00000010)
888#define TXD_W0_OFDM FIELD32(0x00000020)
889#define TXD_W0_IFS FIELD32(0x00000040)
890#define TXD_W0_RETRY_MODE FIELD32(0x00000080)
891#define TXD_W0_TKIP_MIC FIELD32(0x00000100)
892#define TXD_W0_KEY_TABLE FIELD32(0x00000200)
893#define TXD_W0_KEY_INDEX FIELD32(0x0000fc00)
894#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
895#define TXD_W0_BURST2 FIELD32(0x10000000)
896#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000)
897
898/*
899 * Word1
900 * HOST_Q_ID: EDCA/HCCA queue ID.
901 * HW_SEQUENCE: MAC overwrites the frame sequence number.
902 * BUFFER_COUNT: Number of buffers in this TXD.
903 */
904#define TXD_W1_HOST_Q_ID FIELD32(0x0000000f)
905#define TXD_W1_AIFSN FIELD32(0x000000f0)
906#define TXD_W1_CWMIN FIELD32(0x00000f00)
907#define TXD_W1_CWMAX FIELD32(0x0000f000)
908#define TXD_W1_IV_OFFSET FIELD32(0x003f0000)
909#define TXD_W1_HW_SEQUENCE FIELD32(0x10000000)
910#define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000)
911
912/*
913 * Word2: PLCP information
914 */
915#define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff)
916#define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00)
917#define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000)
918#define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000)
919
920/*
921 * Word3
922 */
923#define TXD_W3_IV FIELD32(0xffffffff)
924
925/*
926 * Word4
927 */
928#define TXD_W4_EIV FIELD32(0xffffffff)
929
930/*
931 * Word5
932 * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field).
933 * PACKET_ID: Driver assigned packet ID to categorize TXResult in interrupt.
934 * WAITING_DMA_DONE_INT: TXD been filled with data
935 * and waiting for TxDoneISR housekeeping.
936 */
937#define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff)
938#define TXD_W5_PACKET_ID FIELD32(0x0000ff00)
939#define TXD_W5_TX_POWER FIELD32(0x00ff0000)
940#define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000)
941
942/*
943 * RX descriptor format for RX Ring.
944 */
945
946/*
947 * Word0
948 * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key.
949 * KEY_INDEX: Decryption key actually used.
950 */
951#define RXD_W0_OWNER_NIC FIELD32(0x00000001)
952#define RXD_W0_DROP FIELD32(0x00000002)
953#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004)
954#define RXD_W0_MULTICAST FIELD32(0x00000008)
955#define RXD_W0_BROADCAST FIELD32(0x00000010)
956#define RXD_W0_MY_BSS FIELD32(0x00000020)
957#define RXD_W0_CRC_ERROR FIELD32(0x00000040)
958#define RXD_W0_OFDM FIELD32(0x00000080)
959#define RXD_W0_CIPHER_ERROR FIELD32(0x00000300)
960#define RXD_W0_KEY_INDEX FIELD32(0x0000fc00)
961#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
962#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000)
963
964/*
965 * WORD1
966 * SIGNAL: RX raw data rate reported by BBP.
967 * RSSI: RSSI reported by BBP.
968 */
969#define RXD_W1_SIGNAL FIELD32(0x000000ff)
970#define RXD_W1_RSSI_AGC FIELD32(0x00001f00)
971#define RXD_W1_RSSI_LNA FIELD32(0x00006000)
972#define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000)
973
974/*
975 * Word2
976 * IV: Received IV of originally encrypted.
977 */
978#define RXD_W2_IV FIELD32(0xffffffff)
979
980/*
981 * Word3
982 * EIV: Received EIV of originally encrypted.
983 */
984#define RXD_W3_EIV FIELD32(0xffffffff)
985
986/*
987 * Word4
988 */
989#define RXD_W4_RESERVED FIELD32(0xffffffff)
990
991/*
992 * the above 20-byte is called RXINFO and will be DMAed to MAC RX block
993 * and passed to the HOST driver.
994 * The following fields are for DMA block and HOST usage only.
995 * Can't be touched by ASIC MAC block.
996 */
997
998/*
999 * Word5
1000 */
1001#define RXD_W5_RESERVED FIELD32(0xffffffff)
1002
1003/*
1004 * Macro's for converting txpower from EEPROM to dscape value
1005 * and from dscape value to register value.
1006 */
1007#define MIN_TXPOWER 0
1008#define MAX_TXPOWER 31
1009#define DEFAULT_TXPOWER 24
1010
1011#define TXPOWER_FROM_DEV(__txpower) \
1012({ \
1013 ((__txpower) > MAX_TXPOWER) ? \
1014 DEFAULT_TXPOWER : (__txpower); \
1015})
1016
1017#define TXPOWER_TO_DEV(__txpower) \
1018({ \
1019 ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
1020 (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
1021 (__txpower)); \
1022})
1023
1024#endif /* RT73USB_H */
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-04 18:40:37 -0500