15 files changed, 231 insertions, 201 deletions

diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index b96d6fb1929e..b780307093eb 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -417,6 +417,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
         struct net_local *lp = netdev_priv(dev);
         static unsigned version_printed;
         int i;
+        int tmp;
         unsigned rev_type = 0;
         int eeprom_buff[CHKSUM_LEN];
         int retval;
@@ -492,14 +493,17 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
                                 goto out2;
                         }
         }
-printk("PP_addr=0x%x\n", inw(ioaddr + ADD_PORT));
+        printk(KERN_DEBUG "PP_addr at %x: 0x%x\n",
+                        ioaddr + ADD_PORT, inw(ioaddr + ADD_PORT));
 
         ioaddr &= ~3;
         outw(PP_ChipID, ioaddr + ADD_PORT);
 
-        if (inw(ioaddr + DATA_PORT) != CHIP_EISA_ID_SIG) {
-                printk(KERN_ERR "%s: incorrect signature 0x%x\n",
-                        dev->name, inw(ioaddr + DATA_PORT));
+        tmp = inw(ioaddr + DATA_PORT);
+        if (tmp != CHIP_EISA_ID_SIG) {
+                printk(KERN_DEBUG "%s: incorrect signature at %x: 0x%x!="
+                        CHIP_EISA_ID_SIG_STR "\n",
+                        dev->name, ioaddr + DATA_PORT, tmp);
                 retval = -ENODEV;
                 goto out2;
         }
@@ -1450,6 +1454,7 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
         /* Write the contents of the packet */
         outsw(dev->base_addr + TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
         spin_unlock_irq(&lp->lock);
+        lp->stats.tx_bytes += skb->len;
         dev->trans_start = jiffies;
         dev_kfree_skb (skb);
 
diff --git a/drivers/net/cs89x0.h b/drivers/net/cs89x0.h
index bd3ad8e6cce9..decea264f121 100644
--- a/drivers/net/cs89x0.h
+++ b/drivers/net/cs89x0.h
@@ -93,6 +93,7 @@
 #endif
 
 #define CHIP_EISA_ID_SIG 0x630E   /*  Product ID Code for Crystal Chip (CS8900 spec 4.3) */
+#define CHIP_EISA_ID_SIG_STR "0x630E"
 
 #ifdef IBMEIPKT
 #define EISA_ID_SIG 0x4D24      /*  IBM */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index cb7f051a60ad..5e5d2c3c7ce4 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -162,7 +162,6 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
 static void e1000_restore_vlan(struct e1000_adapter *adapter);
 
-static int e1000_notify_reboot(struct notifier_block *, unsigned long event, void *ptr);
 static int e1000_suspend(struct pci_dev *pdev, uint32_t state);
 #ifdef CONFIG_PM
 static int e1000_resume(struct pci_dev *pdev);
@@ -173,12 +172,6 @@ static int e1000_resume(struct pci_dev *pdev);
 static void e1000_netpoll (struct net_device *netdev);
 #endif
 
-struct notifier_block e1000_notifier_reboot = {
-        .notifier_call  = e1000_notify_reboot,
-        .next           = NULL,
-        .priority       = 0
-};
-
 /* Exported from other modules */
 
 extern void e1000_check_options(struct e1000_adapter *adapter);
@@ -221,9 +214,7 @@ e1000_init_module(void)
         printk(KERN_INFO "%s\n", e1000_copyright);
 
         ret = pci_module_init(&e1000_driver);
-        if(ret >= 0) {
-                register_reboot_notifier(&e1000_notifier_reboot);
-        }
+
         return ret;
 }
 
@@ -239,7 +230,6 @@ module_init(e1000_init_module);
 static void __exit
 e1000_exit_module(void)
 {
-        unregister_reboot_notifier(&e1000_notifier_reboot);
         pci_unregister_driver(&e1000_driver);
 }
 
@@ -3652,23 +3642,6 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
 }
 
 static int
-e1000_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
-{
-        struct pci_dev *pdev = NULL;
-
-        switch(event) {
-        case SYS_DOWN:
-        case SYS_HALT:
-        case SYS_POWER_OFF:
-                while((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
-                        if(pci_dev_driver(pdev) == &e1000_driver)
-                                e1000_suspend(pdev, 3);
-                }
-        }
-        return NOTIFY_DONE;
-}
-
-static int
 e1000_suspend(struct pci_dev *pdev, uint32_t state)
 {
         struct net_device *netdev = pci_get_drvdata(pdev);
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 7cdebe1a0b61..0cd54306e636 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -17,7 +17,7 @@ config MKISS
 
 config 6PACK
         tristate "Serial port 6PACK driver"
-        depends on AX25 && BROKEN_ON_SMP
+        depends on AX25
         ---help---
           6pack is a transmission protocol for the data exchange between your
           PC and your TNC (the Terminal Node Controller acts as a kind of
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index dbb941004ae9..980d7e5d66cb 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -1671,7 +1671,7 @@ static void set_multicast_list(struct net_device *dev)
 
 static struct pcmcia_device_id nmclan_ids[] = {
         PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Ethernet", 0x085a850b, 0x00b2e941),
-        PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet", 0x0ebf1d60, 0x00b2e941),
+        PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet+", 0xebf1d60, 0xad673aaf),
         PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, nmclan_ids);
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index e1664aef3dfd..9f22d138e3ad 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1639,7 +1639,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
         PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab),
         PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101),
         PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab),
-        PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet ", 0x578ba6e7, 0x02d92d1e),
+        PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
         PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
         PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
         PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
@@ -1683,7 +1683,6 @@ static struct pcmcia_device_id pcnet_ids[] = {
         PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11),
         PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff),
         PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68),
-        PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM", 0xbb7fbdd7, 0x5ba10d49),
         PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997),
         PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8),
         PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96),
@@ -1719,6 +1718,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
         PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e),
         PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398),
         PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b),
+        PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec),
         PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9),
         PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84),
         PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9),
@@ -1737,6 +1737,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
         PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947),
         PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941),
         PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6),
+        PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494),
         PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b),
         PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0),
         PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956),
@@ -1753,7 +1754,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
         PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d),
         PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389),
         PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9),
-        PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline ", 0x0733cc81, 0x5e07cfa0),
+        PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a),
         PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737),
         PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922),
         PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0),
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 0d8bb4cccbb7..d652e1eddb45 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -2332,8 +2332,8 @@ static struct pcmcia_device_id smc91c92_ids[] = {
         PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
         PCMCIA_PFC_DEVICE_PROD_ID12(0, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
         PCMCIA_PFC_DEVICE_PROD_ID12(0, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
-        PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
-        PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
+        PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
+        PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
         PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x016c, 0x0020),
         PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0023),
         PCMCIA_DEVICE_PROD_ID123("BASICS by New Media Corporation", "Ethernet", "SMC91C94", 0x23c78a9d, 0x00b2e941, 0xcef397fb),
@@ -2343,8 +2343,8 @@ static struct pcmcia_device_id smc91c92_ids[] = {
         PCMCIA_DEVICE_PROD_ID12("Farallon", "Farallon Enet", 0x58d93fc4, 0x244734e9),
         PCMCIA_DEVICE_PROD_ID12("Megahertz", "CC10BT/2", 0x33234748, 0x3c95b953),
         PCMCIA_DEVICE_PROD_ID12("MELCO/SMC", "LPC-TX", 0xa2cd8e6d, 0x42da662a),
-        PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
-        PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
+        PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Four of Diamonds Ethernet", 0xc2f80cd, 0xb3466314),
+        PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Seven of Diamonds Ethernet", 0xc2f80cd, 0x194b650a),
         PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast Ethernet PCCard", 0x281f1c5d, 0xdcea68bc),
         PCMCIA_DEVICE_PROD_ID12("Psion", "10Mb Ethernet", 0x4ef00b21, 0x844be9e9),
         PCMCIA_DEVICE_PROD_ID12("SMC", "EtherEZ Ethernet 8020", 0xc4f8b18b, 0x4a0eeb2d),
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 9f33bad174e9..ce143f08638a 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -1985,7 +1985,7 @@ static struct pcmcia_device_id xirc2ps_ids[] = {
         PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
         PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
         PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
-        PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet", 0x2e3ee845, 0xc0e778c2),
+        PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
         PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a),
         PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2),
         PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37),
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 82570ec44d8e..6ee4771addf1 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -5133,6 +5133,84 @@ static void __devexit skge_remove_one(struct pci_dev *pdev)
         kfree(pAC);
 }
 
+#ifdef CONFIG_PM
+static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+        struct net_device *dev = pci_get_drvdata(pdev);
+        DEV_NET *pNet = netdev_priv(dev);
+        SK_AC *pAC = pNet->pAC;
+        struct net_device *otherdev = pAC->dev[1];
+
+        if (netif_running(dev)) {
+                netif_carrier_off(dev);
+                DoPrintInterfaceChange = SK_FALSE;
+                SkDrvDeInitAdapter(pAC, 0);  /* performs SkGeClose */
+                netif_device_detach(dev);
+        }
+        if (otherdev != dev) {
+                if (netif_running(otherdev)) {
+                        netif_carrier_off(otherdev);
+                        DoPrintInterfaceChange = SK_FALSE;
+                        SkDrvDeInitAdapter(pAC, 1);  /* performs SkGeClose */
+                        netif_device_detach(otherdev);
+                }
+        }
+
+        pci_save_state(pdev);
+        pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+        if (pAC->AllocFlag & SK_ALLOC_IRQ) {
+                free_irq(dev->irq, dev);
+        }
+        pci_disable_device(pdev);
+        pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+        return 0;
+}
+
+static int skge_resume(struct pci_dev *pdev)
+{
+        struct net_device *dev = pci_get_drvdata(pdev);
+        DEV_NET *pNet = netdev_priv(dev);
+        SK_AC *pAC = pNet->pAC;
+        struct net_device *otherdev = pAC->dev[1];
+        int ret;
+
+        pci_set_power_state(pdev, PCI_D0);
+        pci_restore_state(pdev);
+        pci_enable_device(pdev);
+        pci_set_master(pdev);
+        if (pAC->GIni.GIMacsFound == 2)
+                ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev);
+        else
+                ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, pAC->Name, dev);
+        if (ret) {
+                printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq);
+                pAC->AllocFlag &= ~SK_ALLOC_IRQ;
+                dev->irq = 0;
+                pci_disable_device(pdev);
+                return -EBUSY;
+        }
+
+        netif_device_attach(dev);
+        if (netif_running(dev)) {
+                DoPrintInterfaceChange = SK_FALSE;
+                SkDrvInitAdapter(pAC, 0);    /* first device  */
+        }
+        if (otherdev != dev) {
+                netif_device_attach(otherdev);
+                if (netif_running(otherdev)) {
+                        DoPrintInterfaceChange = SK_FALSE;
+                        SkDrvInitAdapter(pAC, 1);    /* second device  */
+                }
+        }
+
+        return 0;
+}
+#else
+#define skge_suspend NULL
+#define skge_resume NULL
+#endif
+
 static struct pci_device_id skge_pci_tbl[] = {
         { PCI_VENDOR_ID_3COM, 0x1700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
         { PCI_VENDOR_ID_3COM, 0x80eb, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
@@ -5158,6 +5236,8 @@ static struct pci_driver skge_driver = {
         .id_table       = skge_pci_tbl,
         .probe          = skge_probe_one,
         .remove         = __devexit_p(skge_remove_one),
+        .suspend        = skge_suspend,
+        .resume         = skge_resume,
 };
 
 static int __init skge_init(void)
diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
index df4483429a77..6cb49dd02251 100644
--- a/drivers/net/sk98lin/skgeinit.c
+++ b/drivers/net/sk98lin/skgeinit.c
@@ -2016,7 +2016,7 @@ SK_IOC	IoC)		/* IO context */
          * we set the PHY to coma mode and switch to D3 power state.
          */
         if (pAC->GIni.GIYukonLite &&
-                pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+                pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 
                 /* for all ports switch PHY to coma mode */
                 for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c
index 94a09deecb32..42d2d963150a 100644
--- a/drivers/net/sk98lin/skxmac2.c
+++ b/drivers/net/sk98lin/skxmac2.c
@@ -1065,7 +1065,7 @@ int		Port)	/* Port Index (MAC_1 + n) */
         
         /* WA code for COMA mode */
         if (pAC->GIni.GIYukonLite &&
-                pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+                pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
                 
                 SK_IN32(IoC, B2_GP_IO, &DWord);
 
@@ -1110,7 +1110,7 @@ int		Port)	/* Port Index (MAC_1 + n) */
 
         /* WA code for COMA mode */
         if (pAC->GIni.GIYukonLite &&
-                pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+                pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
                 
                 SK_IN32(IoC, B2_GP_IO, &DWord);
 
@@ -2126,7 +2126,7 @@ SK_U8	Mode)		/* low power mode */
         int             Ret = 0;
 
         if (pAC->GIni.GIYukonLite &&
-            pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+            pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 
                 /* save current power mode */
                 LastMode = pAC->GIni.GP[Port].PPhyPowerState;
@@ -2253,7 +2253,7 @@ int		Port)		/* Port Index (e.g. MAC_1) */
         int             Ret = 0;
 
         if (pAC->GIni.GIYukonLite &&
-                pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+                pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 
                 /* save current power mode */
                 LastMode = pAC->GIni.GP[Port].PPhyPowerState;
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 5cacc7ad9e79..f15739481d62 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -42,7 +42,7 @@
 #include "skge.h"
 
 #define DRV_NAME                "skge"
-#define DRV_VERSION             "0.7"
+#define DRV_VERSION             "0.8"
 #define PFX                     DRV_NAME " "
 
 #define DEFAULT_TX_RING_SIZE    128
@@ -55,7 +55,7 @@
 #define ETH_JUMBO_MTU           9000
 #define TX_WATCHDOG             (5 * HZ)
 #define NAPI_WEIGHT             64
-#define BLINK_HZ                (HZ/4)
+#define BLINK_MS                250
 
 MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver");
 MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
@@ -75,7 +75,6 @@ static const struct pci_device_id skge_id_table[] = {
         { PCI_DEVICE(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B) },
         { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
         { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) },
-        { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx  */
         { PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), },
         { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
         { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
@@ -249,7 +248,7 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
         } else {
                 u32 setting;
 
-                switch(ecmd->speed) {
+                switch (ecmd->speed) {
                 case SPEED_1000:
                         if (ecmd->duplex == DUPLEX_FULL)
                                 setting = SUPPORTED_1000baseT_Full;
@@ -620,84 +619,98 @@ static int skge_set_coalesce(struct net_device *dev,
         return 0;
 }
 
-static void skge_led_on(struct skge_hw *hw, int port)
+enum led_mode { LED_MODE_OFF, LED_MODE_ON, LED_MODE_TST };
+static void skge_led(struct skge_port *skge, enum led_mode mode)
 {
+        struct skge_hw *hw = skge->hw;
+        int port = skge->port;
+
+        spin_lock_bh(&hw->phy_lock);
         if (hw->chip_id == CHIP_ID_GENESIS) {
-                skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
-                skge_write8(hw, B0_LED, LED_STAT_ON);
+                switch (mode) {
+                case LED_MODE_OFF:
+                        xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
+                        skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
+                        skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
+                        skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
+                        break;
 
-                skge_write8(hw, SK_REG(port, RX_LED_TST), LED_T_ON);
-                skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
-                skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
+                case LED_MODE_ON:
+                        skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
+                        skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
 
-                /* For Broadcom Phy only */
-                xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
-        } else {
-                gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
-                gm_phy_write(hw, port, PHY_MARV_LED_OVER,
-                                  PHY_M_LED_MO_DUP(MO_LED_ON)  |
-                                  PHY_M_LED_MO_10(MO_LED_ON)   |
-                                  PHY_M_LED_MO_100(MO_LED_ON)  |
-                                  PHY_M_LED_MO_1000(MO_LED_ON) |
-                                  PHY_M_LED_MO_RX(MO_LED_ON));
-        }
-}
+                        skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
+                        skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
 
-static void skge_led_off(struct skge_hw *hw, int port)
-{
-        if (hw->chip_id == CHIP_ID_GENESIS) {
-                skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
-                skge_write8(hw, B0_LED, LED_STAT_OFF);
+                        break;
 
-                skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
-                skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
+                case LED_MODE_TST:
+                        skge_write8(hw, SK_REG(port, RX_LED_TST), LED_T_ON);
+                        skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
+                        skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
 
-                /* Broadcom only */
-                xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
+                        xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
+                        break;
+                }
         } else {
-                gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
-                gm_phy_write(hw, port, PHY_MARV_LED_OVER,
-                                  PHY_M_LED_MO_DUP(MO_LED_OFF)  |
-                                  PHY_M_LED_MO_10(MO_LED_OFF)   |
-                                  PHY_M_LED_MO_100(MO_LED_OFF)  |
-                                  PHY_M_LED_MO_1000(MO_LED_OFF) |
-                                  PHY_M_LED_MO_RX(MO_LED_OFF));
+                switch (mode) {
+                case LED_MODE_OFF:
+                        gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+                        gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+                                     PHY_M_LED_MO_DUP(MO_LED_OFF)  |
+                                     PHY_M_LED_MO_10(MO_LED_OFF)   |
+                                     PHY_M_LED_MO_100(MO_LED_OFF)  |
+                                     PHY_M_LED_MO_1000(MO_LED_OFF) |
+                                     PHY_M_LED_MO_RX(MO_LED_OFF));
+                        break;
+                case LED_MODE_ON:
+                        gm_phy_write(hw, port, PHY_MARV_LED_CTRL,
+                                     PHY_M_LED_PULS_DUR(PULS_170MS) |
+                                     PHY_M_LED_BLINK_RT(BLINK_84MS) |
+                                     PHY_M_LEDC_TX_CTRL |
+                                     PHY_M_LEDC_DP_CTRL);
+                
+                        gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+                                     PHY_M_LED_MO_RX(MO_LED_OFF) |
+                                     (skge->speed == SPEED_100 ?
+                                      PHY_M_LED_MO_100(MO_LED_ON) : 0));
+                        break;
+                case LED_MODE_TST:
+                        gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+                        gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+                                     PHY_M_LED_MO_DUP(MO_LED_ON)  |
+                                     PHY_M_LED_MO_10(MO_LED_ON)   |
+                                     PHY_M_LED_MO_100(MO_LED_ON)  |
+                                     PHY_M_LED_MO_1000(MO_LED_ON) |
+                                     PHY_M_LED_MO_RX(MO_LED_ON));
+                }
         }
-}
-
-static void skge_blink_timer(unsigned long data)
-{
-        struct skge_port *skge = (struct skge_port *) data;
-        struct skge_hw *hw = skge->hw;
-        unsigned long flags;
-
-        spin_lock_irqsave(&hw->phy_lock, flags);
-        if (skge->blink_on)
-                skge_led_on(hw, skge->port);
-        else
-                skge_led_off(hw, skge->port);
-        spin_unlock_irqrestore(&hw->phy_lock, flags);
-
-        skge->blink_on = !skge->blink_on;
-        mod_timer(&skge->led_blink, jiffies + BLINK_HZ);
+        spin_unlock_bh(&hw->phy_lock);
 }
 
 /* blink LED's for finding board */
 static int skge_phys_id(struct net_device *dev, u32 data)
 {
         struct skge_port *skge = netdev_priv(dev);
+        unsigned long ms;
+        enum led_mode mode = LED_MODE_TST;
 
         if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
-                data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+                ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT / HZ) * 1000;
+        else
+                ms = data * 1000;
 
-        /* start blinking */
-        skge->blink_on = 1;
-        mod_timer(&skge->led_blink, jiffies+1);
+        while (ms > 0) {
+                skge_led(skge, mode);
+                mode ^= LED_MODE_TST;
 
-        msleep_interruptible(data * 1000);
-        del_timer_sync(&skge->led_blink);
+                if (msleep_interruptible(BLINK_MS))
+                        break;
+                ms -= BLINK_MS;
+        }
 
-        skge_led_off(skge->hw, skge->port);
+        /* back to regular LED state */
+        skge_led(skge, netif_running(dev) ? LED_MODE_ON : LED_MODE_OFF);
 
         return 0;
 }
@@ -1028,7 +1041,7 @@ static void bcom_check_link(struct skge_hw *hw, int port)
                         }
 
                         /* Check Duplex mismatch */
-                        switch(aux & PHY_B_AS_AN_RES_MSK) {
+                        switch (aux & PHY_B_AS_AN_RES_MSK) {
                         case PHY_B_RES_1000FD:
                                 skge->duplex = DUPLEX_FULL;
                                 break;
@@ -1099,7 +1112,7 @@ static void bcom_phy_init(struct skge_port *skge, int jumbo)
         r |=  XM_MMU_NO_PRE;
         xm_write16(hw, port, XM_MMU_CMD,r);
 
-        switch(id1) {
+        switch (id1) {
         case PHY_BCOM_ID1_C0:
                 /*
                  * Workaround BCOM Errata for the C0 type.
@@ -1194,13 +1207,6 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
         xm_write16(hw, port, XM_STAT_CMD,
                         XM_SC_CLR_RXC | XM_SC_CLR_TXC);
 
-        /* initialize Rx, Tx and Link LED */
-        skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
-        skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
-
-        skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
-        skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
-
         /* Unreset the XMAC. */
         skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
 
@@ -1209,7 +1215,6 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
          * namely for the 1000baseTX cards that use the XMAC's
          * GMII mode.
          */
-        spin_lock_bh(&hw->phy_lock);
         /* Take external Phy out of reset */
         r = skge_read32(hw, B2_GP_IO);
         if (port == 0)
@@ -1219,7 +1224,6 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
 
         skge_write32(hw, B2_GP_IO, r);
         skge_read32(hw, B2_GP_IO);
-        spin_unlock_bh(&hw->phy_lock);
 
         /* Enable GMII interfac */
         xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
@@ -1569,7 +1573,6 @@ static void yukon_init(struct skge_hw *hw, int port)
 {
         struct skge_port *skge = netdev_priv(hw->dev[port]);
         u16 ctrl, ct1000, adv;
-        u16 ledctrl, ledover;
 
         pr_debug("yukon_init\n");
         if (skge->autoneg == AUTONEG_ENABLE) {
@@ -1641,32 +1644,11 @@ static void yukon_init(struct skge_hw *hw, int port)
         gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
         gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
 
-        /* Setup Phy LED's */
-        ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
-        ledover = 0;
-
-        ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
-
-        /* turn off the Rx LED (LED_RX) */
-        ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
-
-        /* disable blink mode (LED_DUPLEX) on collisions */
-        ctrl |= PHY_M_LEDC_DP_CTRL;
-        gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
-
-        if (skge->autoneg == AUTONEG_DISABLE || skge->speed == SPEED_100) {
-                /* turn on 100 Mbps LED (LED_LINK100) */
-                ledover |= PHY_M_LED_MO_100(MO_LED_ON);
-        }
-
-        if (ledover)
-                gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
-
         /* Enable phy interrupt on autonegotiation complete (or link up) */
         if (skge->autoneg == AUTONEG_ENABLE)
-                gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
+                gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_MSK);
         else
-                gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+                gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_DEF_MSK);
 }
 
 static void yukon_reset(struct skge_hw *hw, int port)
@@ -1691,7 +1673,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
 
         /* WA code for COMA mode -- set PHY reset */
         if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-            hw->chip_rev == CHIP_REV_YU_LITE_A3)
+            hw->chip_rev >= CHIP_REV_YU_LITE_A3)
                 skge_write32(hw, B2_GP_IO,
                              (skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9));
 
@@ -1701,7 +1683,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
 
         /* WA code for COMA mode -- clear PHY reset */
         if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-            hw->chip_rev == CHIP_REV_YU_LITE_A3)
+            hw->chip_rev >= CHIP_REV_YU_LITE_A3)
                 skge_write32(hw, B2_GP_IO,
                              (skge_read32(hw, B2_GP_IO) | GP_DIR_9)
                              & ~GP_IO_9);
@@ -1745,9 +1727,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
         gma_write16(hw, port, GM_GP_CTRL, reg);
         skge_read16(hw, GMAC_IRQ_SRC);
 
-        spin_lock_bh(&hw->phy_lock);
         yukon_init(hw, port);
-        spin_unlock_bh(&hw->phy_lock);
 
         /* MIB clear */
         reg = gma_read16(hw, port, GM_PHY_ADDR);
@@ -1796,7 +1776,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
         skge_write16(hw, SK_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK);
         reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
         if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-            hw->chip_rev == CHIP_REV_YU_LITE_A3)
+            hw->chip_rev >= CHIP_REV_YU_LITE_A3)
                 reg &= ~GMF_RX_F_FL_ON;
         skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
         skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg);
@@ -1813,19 +1793,19 @@ static void yukon_stop(struct skge_port *skge)
         int port = skge->port;
 
         if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-            hw->chip_rev == CHIP_REV_YU_LITE_A3) {
+            hw->chip_rev >= CHIP_REV_YU_LITE_A3) {
                 skge_write32(hw, B2_GP_IO,
                              skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9);
         }
 
         gma_write16(hw, port, GM_GP_CTRL,
                          gma_read16(hw, port, GM_GP_CTRL)
-                         & ~(GM_GPCR_RX_ENA|GM_GPCR_RX_ENA));
+                         & ~(GM_GPCR_TX_ENA|GM_GPCR_RX_ENA));
         gma_read16(hw, port, GM_GP_CTRL);
 
         /* set GPHY Control reset */
-        gma_write32(hw, port, GPHY_CTRL, GPC_RST_SET);
-        gma_write32(hw, port, GMAC_CTRL, GMC_RST_SET);
+        skge_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
+        skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
 }
 
 static void yukon_get_stats(struct skge_port *skge, u64 *data)
@@ -1856,11 +1836,12 @@ static void yukon_mac_intr(struct skge_hw *hw, int port)
 
         if (status & GM_IS_RX_FF_OR) {
                 ++skge->net_stats.rx_fifo_errors;
-                gma_write8(hw, port, RX_GMF_CTRL_T, GMF_CLI_RX_FO);
+                skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
         }
+
         if (status & GM_IS_TX_FF_UR) {
                 ++skge->net_stats.tx_fifo_errors;
-                gma_write8(hw, port, TX_GMF_CTRL_T, GMF_CLI_TX_FU);
+                skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
         }
 
 }
@@ -1896,7 +1877,7 @@ static void yukon_link_up(struct skge_port *skge)
         reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
         gma_write16(hw, port, GM_GP_CTRL, reg);
 
-        gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+        gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_DEF_MSK);
         skge_link_up(skge);
 }
 
@@ -1904,12 +1885,14 @@ static void yukon_link_down(struct skge_port *skge)
 {
         struct skge_hw *hw = skge->hw;
         int port = skge->port;
+        u16 ctrl;
 
         pr_debug("yukon_link_down\n");
         gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
-        gm_phy_write(hw, port, GM_GP_CTRL,
-                          gm_phy_read(hw, port, GM_GP_CTRL)
-                          & ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA));
+
+        ctrl = gma_read16(hw, port, GM_GP_CTRL);
+        ctrl &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
+        gma_write16(hw, port, GM_GP_CTRL, ctrl);
 
         if (skge->flow_control == FLOW_MODE_REM_SEND) {
                 /* restore Asymmetric Pause bit */
@@ -2097,10 +2080,12 @@ static int skge_up(struct net_device *dev)
         skge_write32(hw, B0_IMSK, hw->intr_mask);
 
         /* Initialze MAC */
+        spin_lock_bh(&hw->phy_lock);
         if (hw->chip_id == CHIP_ID_GENESIS)
                 genesis_mac_init(hw, port);
         else
                 yukon_mac_init(hw, port);
+        spin_unlock_bh(&hw->phy_lock);
 
         /* Configure RAMbuffers */
         chunk = hw->ram_size / ((hw->ports + 1)*2);
@@ -2116,6 +2101,7 @@ static int skge_up(struct net_device *dev)
         /* Start receiver BMU */
         wmb();
         skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F);
+        skge_led(skge, LED_MODE_ON);
 
         pr_debug("skge_up completed\n");
         return 0;
@@ -2140,8 +2126,6 @@ static int skge_down(struct net_device *dev)
 
         netif_stop_queue(dev);
 
-        del_timer_sync(&skge->led_blink);
-
         /* Stop transmitter */
         skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
         skge_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
@@ -2175,15 +2159,12 @@ static int skge_down(struct net_device *dev)
         if (hw->chip_id == CHIP_ID_GENESIS) {
                 skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_RST_SET);
                 skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_RST_SET);
-                skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_STOP);
-                skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_STOP);
         } else {
                 skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
                 skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
         }
 
-        /* turn off led's */
-        skge_write16(hw, B0_LED, LED_STAT_OFF);
+        skge_led(skge, LED_MODE_OFF);
 
         skge_tx_clean(skge);
         skge_rx_clean(skge);
@@ -2633,11 +2614,17 @@ static inline void skge_tx_intr(struct net_device *dev)
         spin_unlock(&skge->tx_lock);
 }
 
+/* Parity errors seem to happen when Genesis is connected to a switch
+ * with no other ports present. Heartbeat error??
+ */
 static void skge_mac_parity(struct skge_hw *hw, int port)
 {
-        printk(KERN_ERR PFX "%s: mac data parity error\n",
-               hw->dev[port] ? hw->dev[port]->name
-               : (port == 0 ? "(port A)": "(port B"));
+        struct net_device *dev = hw->dev[port];
+
+        if (dev) {
+                struct skge_port *skge = netdev_priv(dev);
+                ++skge->net_stats.tx_heartbeat_errors;
+        }
 
         if (hw->chip_id == CHIP_ID_GENESIS)
                 skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
@@ -3083,10 +3070,6 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
 
         spin_lock_init(&skge->tx_lock);
 
-        init_timer(&skge->led_blink);
-        skge->led_blink.function = skge_blink_timer;
-        skge->led_blink.data = (unsigned long) skge;
-
         if (hw->chip_id != CHIP_ID_GENESIS) {
                 dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
                 skge->rx_csum = 1;
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index fced3d2bc072..b432f1bb8168 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -1449,10 +1449,12 @@ enum {
         PHY_M_IS_DTE_CHANGE     = 1<<2, /* DTE Power Det. Status Changed */
         PHY_M_IS_POL_CHANGE     = 1<<1, /* Polarity Changed */
         PHY_M_IS_JABBER         = 1<<0, /* Jabber */
-};
 
-#define PHY_M_DEF_MSK   ( PHY_M_IS_AN_ERROR | PHY_M_IS_LSP_CHANGE | \
-                          PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)
+        PHY_M_IS_DEF_MSK        = PHY_M_IS_AN_ERROR | PHY_M_IS_LSP_CHANGE |
+                                  PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR,
+
+        PHY_M_IS_AN_MSK         = PHY_M_IS_AN_ERROR | PHY_M_IS_AN_COMPL,
+};
 
 /*****  PHY_MARV_EXT_CTRL       16 bit r/w      Ext. PHY Specific Ctrl *****/
 enum {
@@ -1509,7 +1511,7 @@ enum {
         PHY_M_LEDC_TX_C_MSB     = 1<<0, /* Tx Control (MSB, 88E1111 only) */
 };
 
-#define PHY_M_LED_PULS_DUR(x)   (       ((x)<<12) & PHY_M_LEDC_PULS_MSK)
+#define PHY_M_LED_PULS_DUR(x)   (((x)<<12) & PHY_M_LEDC_PULS_MSK)
 
 enum {
         PULS_NO_STR     = 0,/* no pulse stretching */
@@ -1522,7 +1524,7 @@ enum {
         PULS_1300MS     = 7,/* 1.3 s to 2.7 s */
 };
 
-#define PHY_M_LED_BLINK_RT(x)   (       ((x)<<8) & PHY_M_LEDC_BL_R_MSK)
+#define PHY_M_LED_BLINK_RT(x)   (((x)<<8) & PHY_M_LEDC_BL_R_MSK)
 
 enum {
         BLINK_42MS      = 0,/* 42 ms */
@@ -1602,9 +1604,9 @@ enum {
         PHY_M_FELP_LED0_MSK = 0xf, /* Bit  3.. 0: LED0 Mask (SPEED) */
 };
 
-#define PHY_M_FELP_LED2_CTRL(x) (       ((x)<<8) & PHY_M_FELP_LED2_MSK)
-#define PHY_M_FELP_LED1_CTRL(x) (       ((x)<<4) & PHY_M_FELP_LED1_MSK)
-#define PHY_M_FELP_LED0_CTRL(x) (       ((x)<<0) & PHY_M_FELP_LED0_MSK)
+#define PHY_M_FELP_LED2_CTRL(x) (((x)<<8) & PHY_M_FELP_LED2_MSK)
+#define PHY_M_FELP_LED1_CTRL(x) (((x)<<4) & PHY_M_FELP_LED1_MSK)
+#define PHY_M_FELP_LED0_CTRL(x) (((x)<<0) & PHY_M_FELP_LED0_MSK)
 
 enum {
         LED_PAR_CTRL_COLX       = 0x00,
@@ -1640,7 +1642,7 @@ enum {
         PHY_M_MAC_MD_COPPER     = 5,/* Copper only */
         PHY_M_MAC_MD_1000BX     = 7,/* 1000Base-X only */
 };
-#define PHY_M_MAC_MODE_SEL(x)   (       ((x)<<7) & PHY_M_MAC_MD_MSK)
+#define PHY_M_MAC_MODE_SEL(x)   (((x)<<7) & PHY_M_MAC_MD_MSK)
 
 /*****  PHY_MARV_PHY_CTRL (page 3)              16 bit r/w      LED Control Reg. *****/
 enum {
@@ -1650,10 +1652,10 @@ enum {
         PHY_M_LEDC_STA0_MSK     = 0xf, /* Bit  3.. 0: STAT0 LED Ctrl. Mask */
 };
 
-#define PHY_M_LEDC_LOS_CTRL(x)  (       ((x)<<12) & PHY_M_LEDC_LOS_MSK)
-#define PHY_M_LEDC_INIT_CTRL(x) (       ((x)<<8) & PHY_M_LEDC_INIT_MSK)
-#define PHY_M_LEDC_STA1_CTRL(x) (       ((x)<<4) & PHY_M_LEDC_STA1_MSK)
-#define PHY_M_LEDC_STA0_CTRL(x) (       ((x)<<0) & PHY_M_LEDC_STA0_MSK)
+#define PHY_M_LEDC_LOS_CTRL(x)  (((x)<<12) & PHY_M_LEDC_LOS_MSK)
+#define PHY_M_LEDC_INIT_CTRL(x) (((x)<<8) & PHY_M_LEDC_INIT_MSK)
+#define PHY_M_LEDC_STA1_CTRL(x) (((x)<<4) & PHY_M_LEDC_STA1_MSK)
+#define PHY_M_LEDC_STA0_CTRL(x) (((x)<<0) & PHY_M_LEDC_STA0_MSK)
 
 /* GMAC registers  */
 /* Port Registers */
@@ -2505,8 +2507,6 @@ struct skge_port {
         dma_addr_t           dma;
         unsigned long        mem_size;
         unsigned int         rx_buf_size;
-
-        struct timer_list    led_blink;
 };
 
 
@@ -2606,17 +2606,6 @@ static inline void gma_write16(const struct skge_hw *hw, int port, int r, u16 v)
         skge_write16(hw, SK_GMAC_REG(port,r), v);
 }
 
-static inline void gma_write32(const struct skge_hw *hw, int port, int r, u32 v)
-{
-        skge_write16(hw, SK_GMAC_REG(port, r), (u16) v);
-        skge_write32(hw, SK_GMAC_REG(port, r+4), (u16)(v >> 16));
-}
-
-static inline void gma_write8(const struct skge_hw *hw, int port, int r, u8 v)
-{
-        skge_write8(hw, SK_GMAC_REG(port,r), v);
-}
-
 static inline void gma_set_addr(struct skge_hw *hw, int port, int reg,
                                     const u8 *addr)
 {
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 7089d86e857a..a9b06b8d8e3f 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -188,7 +188,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 #define SMC_IRQ_TRIGGER_TYPE (( \
                    machine_is_omap_h2() \
                 || machine_is_omap_h3() \
-                || (machine_is_omap_innovator() && !cpu_is_omap150()) \
+                || (machine_is_omap_innovator() && !cpu_is_omap1510()) \
         ) ? IRQT_FALLING : IRQT_RISING)
 
 
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 368d2f962f67..1cc1492083c9 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -621,8 +621,6 @@ static struct pcmcia_device_id orinoco_cs_ids[] = {
         PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021),
         PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
         PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
-        PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
-        PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
         PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
         PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
         PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),