2 files changed, 33 insertions, 18 deletions

diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 4d83e5916593..3f36d834ccfd 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -464,6 +464,15 @@ s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw,
         hw->mac.ops.get_link_capabilities(hw, &phy_link_speed, &negotiation);
         speed &= phy_link_speed;
 
+         /* Set autoneg_advertised value based on input link speed */
+        hw->phy.autoneg_advertised = 0;
+
+        if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+                hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+        if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+                hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
         /*
          * When the driver changes the link speeds that it can support,
          * it sets autotry_restart to true to indicate that we need to
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 1c110459d33b..e0feaf5725bb 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -136,11 +136,12 @@ static int ixgbe_get_settings(struct net_device *netdev,
         ecmd->supported = SUPPORTED_10000baseT_Full;
         ecmd->autoneg = AUTONEG_ENABLE;
         ecmd->transceiver = XCVR_EXTERNAL;
-        if (hw->phy.media_type == ixgbe_media_type_copper) {
+        if ((hw->phy.media_type == ixgbe_media_type_copper) ||
+            (hw->mac.type == ixgbe_mac_82599EB)) {
                 ecmd->supported |= (SUPPORTED_1000baseT_Full |
-                                    SUPPORTED_TP | SUPPORTED_Autoneg);
+                                    SUPPORTED_Autoneg);
 
-                ecmd->advertising = (ADVERTISED_TP | ADVERTISED_Autoneg);
+                ecmd->advertising = ADVERTISED_Autoneg;
                 if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
                         ecmd->advertising |= ADVERTISED_10000baseT_Full;
                 if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
@@ -155,7 +156,15 @@ static int ixgbe_get_settings(struct net_device *netdev,
                         ecmd->advertising |= (ADVERTISED_10000baseT_Full |
                                               ADVERTISED_1000baseT_Full);
 
-                ecmd->port = PORT_TP;
+                if (hw->phy.media_type == ixgbe_media_type_copper) {
+                        ecmd->supported |= SUPPORTED_TP;
+                        ecmd->advertising |= ADVERTISED_TP;
+                        ecmd->port = PORT_TP;
+                } else {
+                        ecmd->supported |= SUPPORTED_FIBRE;
+                        ecmd->advertising |= ADVERTISED_FIBRE;
+                        ecmd->port = PORT_FIBRE;
+                }
         } else if (hw->phy.media_type == ixgbe_media_type_backplane) {
                 /* Set as FIBRE until SERDES defined in kernel */
                 switch (hw->device_id) {
@@ -203,16 +212,10 @@ static int ixgbe_set_settings(struct net_device *netdev,
         struct ixgbe_adapter *adapter = netdev_priv(netdev);
         struct ixgbe_hw *hw = &adapter->hw;
         u32 advertised, old;
-        s32 err;
+        s32 err = 0;
 
-        switch (hw->phy.media_type) {
-        case ixgbe_media_type_fiber:
-                if ((ecmd->autoneg == AUTONEG_ENABLE) ||
-                    (ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
-                        return -EINVAL;
-                /* in this case we currently only support 10Gb/FULL */
-                break;
-        case ixgbe_media_type_copper:
+        if ((hw->phy.media_type == ixgbe_media_type_copper) ||
+            (hw->mac.type == ixgbe_mac_82599EB)) {
                 /* 10000/copper and 1000/copper must autoneg
                  * this function does not support any duplex forcing, but can
                  * limit the advertising of the adapter to only 10000 or 1000 */
@@ -228,20 +231,23 @@ static int ixgbe_set_settings(struct net_device *netdev,
                         advertised |= IXGBE_LINK_SPEED_1GB_FULL;
 
                 if (old == advertised)
-                        break;
+                        return err;
                 /* this sets the link speed and restarts auto-neg */
+                hw->mac.autotry_restart = true;
                 err = hw->mac.ops.setup_link_speed(hw, advertised, true, true);
                 if (err) {
                         DPRINTK(PROBE, INFO,
                                 "setup link failed with code %d\n", err);
                         hw->mac.ops.setup_link_speed(hw, old, true, true);
                 }
-                break;
-        default:
-                break;
+        } else {
+                /* in this case we currently only support 10Gb/FULL */
+                if ((ecmd->autoneg == AUTONEG_ENABLE) ||
+                    (ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
+                        return -EINVAL;
         }
 
-        return 0;
+        return err;
 }
 
 static void ixgbe_get_pauseparam(struct net_device *netdev,