aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/phy/Kconfig12
-rw-r--r--drivers/net/phy/Makefile12
-rw-r--r--drivers/net/phy/mdio_bus.c4
-rw-r--r--drivers/net/phy/phy.c9
-rw-r--r--drivers/net/phy/phy.c.orig860
-rw-r--r--drivers/net/phy/phy_device.c48
6 files changed, 53 insertions, 892 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 8b5db2343cc3..c2f1bf1d02d2 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -5,7 +5,7 @@
5menu "PHY device support" 5menu "PHY device support"
6 6
7config PHYLIB 7config PHYLIB
8 bool "PHY Device support and infrastructure" 8 tristate "PHY Device support and infrastructure"
9 depends on NET_ETHERNET 9 depends on NET_ETHERNET
10 help 10 help
11 Ethernet controllers are usually attached to PHY 11 Ethernet controllers are usually attached to PHY
@@ -24,31 +24,31 @@ comment "MII PHY device drivers"
24 depends on PHYLIB 24 depends on PHYLIB
25 25
26config MARVELL_PHY 26config MARVELL_PHY
27 bool "Drivers for Marvell PHYs" 27 tristate "Drivers for Marvell PHYs"
28 depends on PHYLIB 28 depends on PHYLIB
29 ---help--- 29 ---help---
30 Currently has a driver for the 88E1011S 30 Currently has a driver for the 88E1011S
31 31
32config DAVICOM_PHY 32config DAVICOM_PHY
33 bool "Drivers for Davicom PHYs" 33 tristate "Drivers for Davicom PHYs"
34 depends on PHYLIB 34 depends on PHYLIB
35 ---help--- 35 ---help---
36 Currently supports dm9161e and dm9131 36 Currently supports dm9161e and dm9131
37 37
38config QSEMI_PHY 38config QSEMI_PHY
39 bool "Drivers for Quality Semiconductor PHYs" 39 tristate "Drivers for Quality Semiconductor PHYs"
40 depends on PHYLIB 40 depends on PHYLIB
41 ---help--- 41 ---help---
42 Currently supports the qs6612 42 Currently supports the qs6612
43 43
44config LXT_PHY 44config LXT_PHY
45 bool "Drivers for the Intel LXT PHYs" 45 tristate "Drivers for the Intel LXT PHYs"
46 depends on PHYLIB 46 depends on PHYLIB
47 ---help--- 47 ---help---
48 Currently supports the lxt970, lxt971 48 Currently supports the lxt970, lxt971
49 49
50config CICADA_PHY 50config CICADA_PHY
51 bool "Drivers for the Cicada PHYs" 51 tristate "Drivers for the Cicada PHYs"
52 depends on PHYLIB 52 depends on PHYLIB
53 ---help--- 53 ---help---
54 Currently supports the cis8204 54 Currently supports the cis8204
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 1af05de6ced0..fb7cb385a659 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -1,9 +1,9 @@
1# Makefile for Linux PHY drivers 1# Makefile for Linux PHY drivers
2 2
3obj-$(CONFIG_PHYLIB) += phy.o phy_device.o mdio_bus.o 3libphy-objs := phy.o phy_device.o mdio_bus.o
4 4
5obj-$(CONFIG_MARVELL_PHY) += marvell.o 5obj-$(CONFIG_MARVELL_PHY) += libphy.o marvell.o
6obj-$(CONFIG_DAVICOM_PHY) += davicom.o 6obj-$(CONFIG_DAVICOM_PHY) += libphy.o davicom.o
7obj-$(CONFIG_CICADA_PHY) += cicada.o 7obj-$(CONFIG_CICADA_PHY) += libphy.o cicada.o
8obj-$(CONFIG_LXT_PHY) += lxt.o 8obj-$(CONFIG_LXT_PHY) += libphy.o lxt.o
9obj-$(CONFIG_QSEMI_PHY) += qsemi.o 9obj-$(CONFIG_QSEMI_PHY) += libphy.o qsemi.o
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index e75103ba6f86..5fbea6acfe80 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -165,9 +165,9 @@ struct bus_type mdio_bus_type = {
165 .resume = mdio_bus_resume, 165 .resume = mdio_bus_resume,
166}; 166};
167 167
168static int __init mdio_bus_init(void) 168int __init mdio_bus_init(void)
169{ 169{
170 return bus_register(&mdio_bus_type); 170 return bus_register(&mdio_bus_type);
171} 171}
172 172
173subsys_initcall(mdio_bus_init); 173
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index e2c6896b92d2..934065dd6371 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -39,7 +39,6 @@
39#include <asm/irq.h> 39#include <asm/irq.h>
40#include <asm/uaccess.h> 40#include <asm/uaccess.h>
41 41
42static void phy_change(void *data);
43static void phy_timer(unsigned long data); 42static void phy_timer(unsigned long data);
44 43
45/* Convenience function to print out the current phy status 44/* Convenience function to print out the current phy status
@@ -464,7 +463,6 @@ void phy_stop_machine(struct phy_device *phydev)
464 phydev->adjust_state = NULL; 463 phydev->adjust_state = NULL;
465} 464}
466 465
467#ifdef CONFIG_PHYCONTROL
468/* phy_error: 466/* phy_error:
469 * 467 *
470 * Moves the PHY to the HALTED state in response to a read 468 * Moves the PHY to the HALTED state in response to a read
@@ -479,6 +477,10 @@ void phy_error(struct phy_device *phydev)
479 spin_unlock(&phydev->lock); 477 spin_unlock(&phydev->lock);
480} 478}
481 479
480#ifdef CONFIG_PHYCONTROL
481
482static void phy_change(void *data);
483
482/* phy_interrupt 484/* phy_interrupt
483 * 485 *
484 * description: When a PHY interrupt occurs, the handler disables 486 * description: When a PHY interrupt occurs, the handler disables
@@ -672,6 +674,8 @@ void phy_start(struct phy_device *phydev)
672EXPORT_SYMBOL(phy_stop); 674EXPORT_SYMBOL(phy_stop);
673EXPORT_SYMBOL(phy_start); 675EXPORT_SYMBOL(phy_start);
674 676
677#endif /* CONFIG_PHYCONTROL */
678
675/* PHY timer which handles the state machine */ 679/* PHY timer which handles the state machine */
676static void phy_timer(unsigned long data) 680static void phy_timer(unsigned long data)
677{ 681{
@@ -859,4 +863,3 @@ static void phy_timer(unsigned long data)
859 mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ); 863 mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ);
860} 864}
861 865
862#endif /* CONFIG_PHYCONTROL */
diff --git a/drivers/net/phy/phy.c.orig b/drivers/net/phy/phy.c.orig
deleted file mode 100644
index 6af17cec9ace..000000000000
--- a/drivers/net/phy/phy.c.orig
+++ /dev/null
@@ -1,860 +0,0 @@
1/*
2 * drivers/net/phy/phy.c
3 *
4 * Framework for configuring and reading PHY devices
5 * Based on code in sungem_phy.c and gianfar_phy.c
6 *
7 * Author: Andy Fleming
8 *
9 * Copyright (c) 2004 Freescale Semiconductor, Inc.
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 *
16 */
17#include <linux/config.h>
18#include <linux/kernel.h>
19#include <linux/sched.h>
20#include <linux/string.h>
21#include <linux/errno.h>
22#include <linux/unistd.h>
23#include <linux/slab.h>
24#include <linux/interrupt.h>
25#include <linux/init.h>
26#include <linux/delay.h>
27#include <linux/netdevice.h>
28#include <linux/etherdevice.h>
29#include <linux/skbuff.h>
30#include <linux/spinlock.h>
31#include <linux/mm.h>
32#include <linux/module.h>
33#include <linux/version.h>
34#include <linux/mii.h>
35#include <linux/ethtool.h>
36#include <linux/phy.h>
37
38#include <asm/io.h>
39#include <asm/irq.h>
40#include <asm/uaccess.h>
41
42static void phy_change(void *data);
43static void phy_timer(unsigned long data);
44
45/* Convenience function to print out the current phy status
46 */
47void phy_print_status(struct phy_device *phydev)
48{
49 pr_info("%s: Link is %s", phydev->dev.bus_id,
50 phydev->link ? "Up" : "Down");
51 if (phydev->link)
52 printk(" - %d/%s", phydev->speed,
53 DUPLEX_FULL == phydev->duplex ?
54 "Full" : "Half");
55
56 printk("\n");
57}
58EXPORT_SYMBOL(phy_print_status);
59
60
61/* Convenience functions for reading/writing a given PHY
62 * register. They MUST NOT be called from interrupt context,
63 * because the bus read/write functions may wait for an interrupt
64 * to conclude the operation. */
65int phy_read(struct phy_device *phydev, u16 regnum)
66{
67 int retval;
68 struct mii_bus *bus = phydev->bus;
69
70 spin_lock_bh(&bus->mdio_lock);
71 retval = bus->read(bus, phydev->addr, regnum);
72 spin_unlock_bh(&bus->mdio_lock);
73
74 return retval;
75}
76EXPORT_SYMBOL(phy_read);
77
78int phy_write(struct phy_device *phydev, u16 regnum, u16 val)
79{
80 int err;
81 struct mii_bus *bus = phydev->bus;
82
83 spin_lock_bh(&bus->mdio_lock);
84 err = bus->write(bus, phydev->addr, regnum, val);
85 spin_unlock_bh(&bus->mdio_lock);
86
87 return err;
88}
89EXPORT_SYMBOL(phy_write);
90
91
92int phy_clear_interrupt(struct phy_device *phydev)
93{
94 int err = 0;
95
96 if (phydev->drv->ack_interrupt)
97 err = phydev->drv->ack_interrupt(phydev);
98
99 return err;
100}
101
102
103int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
104{
105 int err = 0;
106
107 phydev->interrupts = interrupts;
108 if (phydev->drv->config_intr)
109 err = phydev->drv->config_intr(phydev);
110
111 return err;
112}
113
114
115/* phy_aneg_done
116 *
117 * description: Reads the status register and returns 0 either if
118 * auto-negotiation is incomplete, or if there was an error.
119 * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
120 */
121static inline int phy_aneg_done(struct phy_device *phydev)
122{
123 int retval;
124
125 retval = phy_read(phydev, MII_BMSR);
126
127 return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
128}
129
130/* phy_start_aneg
131 *
132 * description: Calls the PHY driver's config_aneg, and then
133 * sets the PHY state to PHY_AN if auto-negotiation is enabled,
134 * and to PHY_FORCING if auto-negotiation is disabled. Unless
135 * the PHY is currently HALTED.
136 */
137int phy_start_aneg(struct phy_device *phydev)
138{
139 int err;
140
141 spin_lock(&phydev->lock);
142
143 if (AUTONEG_DISABLE == phydev->autoneg)
144 phy_sanitize_settings(phydev);
145
146 err = phydev->drv->config_aneg(phydev);
147
148 if (err < 0)
149 goto out_unlock;
150
151 if (phydev->state != PHY_HALTED) {
152 if (AUTONEG_ENABLE == phydev->autoneg) {
153 phydev->state = PHY_AN;
154 phydev->link_timeout = PHY_AN_TIMEOUT;
155 } else {
156 phydev->state = PHY_FORCING;
157 phydev->link_timeout = PHY_FORCE_TIMEOUT;
158 }
159 }
160
161out_unlock:
162 spin_unlock(&phydev->lock);
163 return err;
164}
165EXPORT_SYMBOL(phy_start_aneg);
166
167
168/* A structure for mapping a particular speed and duplex
169 * combination to a particular SUPPORTED and ADVERTISED value */
170struct phy_setting {
171 int speed;
172 int duplex;
173 u32 setting;
174};
175
176/* A mapping of all SUPPORTED settings to speed/duplex */
177static struct phy_setting settings[] = {
178 {
179 .speed = 10000,
180 .duplex = DUPLEX_FULL,
181 .setting = SUPPORTED_10000baseT_Full,
182 },
183 {
184 .speed = SPEED_1000,
185 .duplex = DUPLEX_FULL,
186 .setting = SUPPORTED_1000baseT_Full,
187 },
188 {
189 .speed = SPEED_1000,
190 .duplex = DUPLEX_HALF,
191 .setting = SUPPORTED_1000baseT_Half,
192 },
193 {
194 .speed = SPEED_100,
195 .duplex = DUPLEX_FULL,
196 .setting = SUPPORTED_100baseT_Full,
197 },
198 {
199 .speed = SPEED_100,
200 .duplex = DUPLEX_HALF,
201 .setting = SUPPORTED_100baseT_Half,
202 },
203 {
204 .speed = SPEED_10,
205 .duplex = DUPLEX_FULL,
206 .setting = SUPPORTED_10baseT_Full,
207 },
208 {
209 .speed = SPEED_10,
210 .duplex = DUPLEX_HALF,
211 .setting = SUPPORTED_10baseT_Half,
212 },
213};
214
215#define MAX_NUM_SETTINGS (sizeof(settings)/sizeof(struct phy_setting))
216
217/* phy_find_setting
218 *
219 * description: Searches the settings array for the setting which
220 * matches the desired speed and duplex, and returns the index
221 * of that setting. Returns the index of the last setting if
222 * none of the others match.
223 */
224static inline int phy_find_setting(int speed, int duplex)
225{
226 int idx = 0;
227
228 while (idx < ARRAY_SIZE(settings) &&
229 (settings[idx].speed != speed ||
230 settings[idx].duplex != duplex))
231 idx++;
232
233 return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
234}
235
236/* phy_find_valid
237 * idx: The first index in settings[] to search
238 * features: A mask of the valid settings
239 *
240 * description: Returns the index of the first valid setting less
241 * than or equal to the one pointed to by idx, as determined by
242 * the mask in features. Returns the index of the last setting
243 * if nothing else matches.
244 */
245static inline int phy_find_valid(int idx, u32 features)
246{
247 while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features))
248 idx++;
249
250 return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
251}
252
253/* phy_sanitize_settings
254 *
255 * description: Make sure the PHY is set to supported speeds and
256 * duplexes. Drop down by one in this order: 1000/FULL,
257 * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF
258 */
259void phy_sanitize_settings(struct phy_device *phydev)
260{
261 u32 features = phydev->supported;
262 int idx;
263
264 /* Sanitize settings based on PHY capabilities */
265 if ((features & SUPPORTED_Autoneg) == 0)
266 phydev->autoneg = 0;
267
268 idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
269 features);
270
271 phydev->speed = settings[idx].speed;
272 phydev->duplex = settings[idx].duplex;
273}
274EXPORT_SYMBOL(phy_sanitize_settings);
275
276/* phy_force_reduction
277 *
278 * description: Reduces the speed/duplex settings by
279 * one notch. The order is so:
280 * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF,
281 * 10/FULL, 10/HALF. The function bottoms out at 10/HALF.
282 */
283static void phy_force_reduction(struct phy_device *phydev)
284{
285 int idx;
286
287 idx = phy_find_setting(phydev->speed, phydev->duplex);
288
289 idx++;
290
291 idx = phy_find_valid(idx, phydev->supported);
292
293 phydev->speed = settings[idx].speed;
294 phydev->duplex = settings[idx].duplex;
295
296 pr_info("Trying %d/%s\n", phydev->speed,
297 DUPLEX_FULL == phydev->duplex ?
298 "FULL" : "HALF");
299}
300
301/* phy_ethtool_sset:
302 * A generic ethtool sset function. Handles all the details
303 *
304 * A few notes about parameter checking:
305 * - We don't set port or transceiver, so we don't care what they
306 * were set to.
307 * - phy_start_aneg() will make sure forced settings are sane, and
308 * choose the next best ones from the ones selected, so we don't
309 * care if ethtool tries to give us bad values
310 */
311int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
312{
313 if (cmd->phy_address != phydev->addr)
314 return -EINVAL;
315
316 /* We make sure that we don't pass unsupported
317 * values in to the PHY */
318 cmd->advertising &= phydev->supported;
319
320 /* Verify the settings we care about. */
321 if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
322 return -EINVAL;
323
324 if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
325 return -EINVAL;
326
327 if (cmd->autoneg == AUTONEG_DISABLE
328 && ((cmd->speed != SPEED_1000
329 && cmd->speed != SPEED_100
330 && cmd->speed != SPEED_10)
331 || (cmd->duplex != DUPLEX_HALF
332 && cmd->duplex != DUPLEX_FULL)))
333 return -EINVAL;
334
335 phydev->autoneg = cmd->autoneg;
336
337 phydev->speed = cmd->speed;
338
339 phydev->advertising = cmd->advertising;
340
341 if (AUTONEG_ENABLE == cmd->autoneg)
342 phydev->advertising |= ADVERTISED_Autoneg;
343 else
344 phydev->advertising &= ~ADVERTISED_Autoneg;
345
346 phydev->duplex = cmd->duplex;
347
348 /* Restart the PHY */
349 phy_start_aneg(phydev);
350
351 return 0;
352}
353
354int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
355{
356 cmd->supported = phydev->supported;
357
358 cmd->advertising = phydev->advertising;
359
360 cmd->speed = phydev->speed;
361 cmd->duplex = phydev->duplex;
362 cmd->port = PORT_MII;
363 cmd->phy_address = phydev->addr;
364 cmd->transceiver = XCVR_EXTERNAL;
365 cmd->autoneg = phydev->autoneg;
366
367 return 0;
368}
369
370
371/* Note that this function is currently incompatible with the
372 * PHYCONTROL layer. It changes registers without regard to
373 * current state. Use at own risk
374 */
375int phy_mii_ioctl(struct phy_device *phydev,
376 struct mii_ioctl_data *mii_data, int cmd)
377{
378 u16 val = mii_data->val_in;
379
380 switch (cmd) {
381 case SIOCGMIIPHY:
382 mii_data->phy_id = phydev->addr;
383 break;
384 case SIOCGMIIREG:
385 mii_data->val_out = phy_read(phydev, mii_data->reg_num);
386 break;
387
388 case SIOCSMIIREG:
389 if (!capable(CAP_NET_ADMIN))
390 return -EPERM;
391
392 if (mii_data->phy_id == phydev->addr) {
393 switch(mii_data->reg_num) {
394 case MII_BMCR:
395 if (val & (BMCR_RESET|BMCR_ANENABLE))
396 phydev->autoneg = AUTONEG_DISABLE;
397 else
398 phydev->autoneg = AUTONEG_ENABLE;
399 if ((!phydev->autoneg) && (val & BMCR_FULLDPLX))
400 phydev->duplex = DUPLEX_FULL;
401 else
402 phydev->duplex = DUPLEX_HALF;
403 break;
404 case MII_ADVERTISE:
405 phydev->advertising = val;
406 break;
407 default:
408 /* do nothing */
409 break;
410 }
411 }
412
413 phy_write(phydev, mii_data->reg_num, val);
414
415 if (mii_data->reg_num == MII_BMCR
416 && val & BMCR_RESET
417 && phydev->drv->config_init)
418 phydev->drv->config_init(phydev);
419 break;
420 }
421
422 return 0;
423}
424
425/* phy_start_machine:
426 *
427 * description: The PHY infrastructure can run a state machine
428 * which tracks whether the PHY is starting up, negotiating,
429 * etc. This function starts the timer which tracks the state
430 * of the PHY. If you want to be notified when the state
431 * changes, pass in the callback, otherwise, pass NULL. If you
432 * want to maintain your own state machine, do not call this
433 * function. */
434void phy_start_machine(struct phy_device *phydev,
435 void (*handler)(struct net_device *))
436{
437 phydev->adjust_state = handler;
438
439 init_timer(&phydev->phy_timer);
440 phydev->phy_timer.function = &phy_timer;
441 phydev->phy_timer.data = (unsigned long) phydev;
442 mod_timer(&phydev->phy_timer, jiffies + HZ);
443}
444
445/* phy_stop_machine
446 *
447 * description: Stops the state machine timer, sets the state to
448 * UP (unless it wasn't up yet), and then frees the interrupt,
449 * if it is in use. This function must be called BEFORE
450 * phy_detach.
451 */
452void phy_stop_machine(struct phy_device *phydev)
453{
454 del_timer_sync(&phydev->phy_timer);
455
456 spin_lock(&phydev->lock);
457 if (phydev->state > PHY_UP)
458 phydev->state = PHY_UP;
459 spin_unlock(&phydev->lock);
460
461 if (phydev->irq != PHY_POLL)
462 phy_stop_interrupts(phydev);
463
464 phydev->adjust_state = NULL;
465}
466
467#ifdef CONFIG_PHYCONTROL
468/* phy_error:
469 *
470 * Moves the PHY to the HALTED state in response to a read
471 * or write error, and tells the controller the link is down.
472 * Must not be called from interrupt context, or while the
473 * phydev->lock is held.
474 */
475void phy_error(struct phy_device *phydev)
476{
477 spin_lock(&phydev->lock);
478 phydev->state = PHY_HALTED;
479 spin_unlock(&phydev->lock);
480}
481
482/* phy_interrupt
483 *
484 * description: When a PHY interrupt occurs, the handler disables
485 * interrupts, and schedules a work task to clear the interrupt.
486 */
487static irqreturn_t phy_interrupt(int irq, void *phy_dat, struct pt_regs *regs)
488{
489 struct phy_device *phydev = phy_dat;
490
491 /* The MDIO bus is not allowed to be written in interrupt
492 * context, so we need to disable the irq here. A work
493 * queue will write the PHY to disable and clear the
494 * interrupt, and then reenable the irq line. */
495 disable_irq_nosync(irq);
496
497 schedule_work(&phydev->phy_queue);
498
499 return IRQ_HANDLED;
500}
501
502/* Enable the interrupts from the PHY side */
503int phy_enable_interrupts(struct phy_device *phydev)
504{
505 int err;
506
507 err = phy_clear_interrupt(phydev);
508
509 if (err < 0)
510 return err;
511
512 err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
513
514 return err;
515}
516
517/* Disable the PHY interrupts from the PHY side */
518int phy_disable_interrupts(struct phy_device *phydev)
519{
520 int err;
521
522 /* Disable PHY interrupts */
523 err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
524
525 if (err)
526 goto phy_err;
527
528 /* Clear the interrupt */
529 err = phy_clear_interrupt(phydev);
530
531 if (err)
532 goto phy_err;
533
534 return 0;
535
536phy_err:
537 phy_error(phydev);
538
539 return err;
540}
541
542/* phy_start_interrupts
543 *
544 * description: Request the interrupt for the given PHY. If
545 * this fails, then we set irq to PHY_POLL.
546 * Otherwise, we enable the interrupts in the PHY.
547 * Returns 0 on success.
548 * This should only be called with a valid IRQ number.
549 */
550int phy_start_interrupts(struct phy_device *phydev)
551{
552 int err = 0;
553
554 INIT_WORK(&phydev->phy_queue, phy_change, phydev);
555
556 if (request_irq(phydev->irq, phy_interrupt,
557 SA_SHIRQ,
558 "phy_interrupt",
559 phydev) < 0) {
560 printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n",
561 phydev->bus->name,
562 phydev->irq);
563 phydev->irq = PHY_POLL;
564 return 0;
565 }
566
567 err = phy_enable_interrupts(phydev);
568
569 return err;
570}
571EXPORT_SYMBOL(phy_start_interrupts);
572
573int phy_stop_interrupts(struct phy_device *phydev)
574{
575 int err;
576
577 err = phy_disable_interrupts(phydev);
578
579 if (err)
580 phy_error(phydev);
581
582 free_irq(phydev->irq, phydev);
583
584 return err;
585}
586EXPORT_SYMBOL(phy_stop_interrupts);
587
588
589/* Scheduled by the phy_interrupt/timer to handle PHY changes */
590static void phy_change(void *data)
591{
592 int err;
593 struct phy_device *phydev = data;
594
595 err = phy_disable_interrupts(phydev);
596
597 if (err)
598 goto phy_err;
599
600 spin_lock(&phydev->lock);
601 if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
602 phydev->state = PHY_CHANGELINK;
603 spin_unlock(&phydev->lock);
604
605 enable_irq(phydev->irq);
606
607 /* Reenable interrupts */
608 err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
609
610 if (err)
611 goto irq_enable_err;
612
613 return;
614
615irq_enable_err:
616 disable_irq(phydev->irq);
617phy_err:
618 phy_error(phydev);
619}
620
621/* Bring down the PHY link, and stop checking the status. */
622void phy_stop(struct phy_device *phydev)
623{
624 spin_lock(&phydev->lock);
625
626 if (PHY_HALTED == phydev->state)
627 goto out_unlock;
628
629 if (phydev->irq != PHY_POLL) {
630 /* Clear any pending interrupts */
631 phy_clear_interrupt(phydev);
632
633 /* Disable PHY Interrupts */
634 phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
635 }
636
637 phydev->state = PHY_HALTED;
638
639out_unlock:
640 spin_unlock(&phydev->lock);
641}
642
643
644/* phy_start
645 *
646 * description: Indicates the attached device's readiness to
647 * handle PHY-related work. Used during startup to start the
648 * PHY, and after a call to phy_stop() to resume operation.
649 * Also used to indicate the MDIO bus has cleared an error
650 * condition.
651 */
652void phy_start(struct phy_device *phydev)
653{
654 spin_lock(&phydev->lock);
655
656 switch (phydev->state) {
657 case PHY_STARTING:
658 phydev->state = PHY_PENDING;
659 break;
660 case PHY_READY:
661 phydev->state = PHY_UP;
662 break;
663 case PHY_HALTED:
664 phydev->state = PHY_RESUMING;
665 default:
666 break;
667 }
668 spin_unlock(&phydev->lock);
669}
670EXPORT_SYMBOL(phy_stop);
671EXPORT_SYMBOL(phy_start);
672
673/* PHY timer which handles the state machine */
674static void phy_timer(unsigned long data)
675{
676 struct phy_device *phydev = (struct phy_device *)data;
677 int needs_aneg = 0;
678 int err = 0;
679
680 spin_lock(&phydev->lock);
681
682 if (phydev->adjust_state)
683 phydev->adjust_state(phydev->attached_dev);
684
685 switch(phydev->state) {
686 case PHY_DOWN:
687 case PHY_STARTING:
688 case PHY_READY:
689 case PHY_PENDING:
690 break;
691 case PHY_UP:
692 needs_aneg = 1;
693
694 phydev->link_timeout = PHY_AN_TIMEOUT;
695
696 break;
697 case PHY_AN:
698 /* Check if negotiation is done. Break
699 * if there's an error */
700 err = phy_aneg_done(phydev);
701 if (err < 0)
702 break;
703
704 /* If auto-negotiation is done, we change to
705 * either RUNNING, or NOLINK */
706 if (err > 0) {
707 err = phy_read_status(phydev);
708
709 if (err)
710 break;
711
712 if (phydev->link) {
713 phydev->state = PHY_RUNNING;
714 netif_carrier_on(phydev->attached_dev);
715 } else {
716 phydev->state = PHY_NOLINK;
717 netif_carrier_off(phydev->attached_dev);
718 }
719
720 phydev->adjust_link(phydev->attached_dev);
721
722 } else if (0 == phydev->link_timeout--) {
723 /* The counter expired, so either we
724 * switch to forced mode, or the
725 * magic_aneg bit exists, and we try aneg
726 * again */
727 if (!(phydev->drv->flags & PHY_HAS_MAGICANEG)) {
728 int idx;
729
730 /* We'll start from the
731 * fastest speed, and work
732 * our way down */
733 idx = phy_find_valid(0,
734 phydev->supported);
735
736 phydev->speed = settings[idx].speed;
737 phydev->duplex = settings[idx].duplex;
738
739 phydev->autoneg = AUTONEG_DISABLE;
740 phydev->state = PHY_FORCING;
741 phydev->link_timeout =
742 PHY_FORCE_TIMEOUT;
743
744 pr_info("Trying %d/%s\n",
745 phydev->speed,
746 DUPLEX_FULL ==
747 phydev->duplex ?
748 "FULL" : "HALF");
749 }
750
751 needs_aneg = 1;
752 }
753 break;
754 case PHY_NOLINK:
755 err = phy_read_status(phydev);
756
757 if (err)
758 break;
759
760 if (phydev->link) {
761 phydev->state = PHY_RUNNING;
762 netif_carrier_on(phydev->attached_dev);
763 phydev->adjust_link(phydev->attached_dev);
764 }
765 break;
766 case PHY_FORCING:
767 err = phy_read_status(phydev);
768
769 if (err)
770 break;
771
772 if (phydev->link) {
773 phydev->state = PHY_RUNNING;
774 netif_carrier_on(phydev->attached_dev);
775 } else {
776 if (0 == phydev->link_timeout--) {
777 phy_force_reduction(phydev);
778 needs_aneg = 1;
779 }
780 }
781
782 phydev->adjust_link(phydev->attached_dev);
783 break;
784 case PHY_RUNNING:
785 /* Only register a CHANGE if we are
786 * polling */
787 if (PHY_POLL == phydev->irq)
788 phydev->state = PHY_CHANGELINK;
789 break;
790 case PHY_CHANGELINK:
791 err = phy_read_status(phydev);
792
793 if (err)
794 break;
795
796 if (phydev->link) {
797 phydev->state = PHY_RUNNING;
798 netif_carrier_on(phydev->attached_dev);
799 } else {
800 phydev->state = PHY_NOLINK;
801 netif_carrier_off(phydev->attached_dev);
802 }
803
804 phydev->adjust_link(phydev->attached_dev);
805
806 if (PHY_POLL != phydev->irq)
807 err = phy_config_interrupt(phydev,
808 PHY_INTERRUPT_ENABLED);
809 break;
810 case PHY_HALTED:
811 if (phydev->link) {
812 phydev->link = 0;
813 netif_carrier_off(phydev->attached_dev);
814 phydev->adjust_link(phydev->attached_dev);
815 }
816 break;
817 case PHY_RESUMING:
818
819 err = phy_clear_interrupt(phydev);
820
821 if (err)
822 break;
823
824 err = phy_config_interrupt(phydev,
825 PHY_INTERRUPT_ENABLED);
826
827 if (err)
828 break;
829
830 if (AUTONEG_ENABLE == phydev->autoneg) {
831 err = phy_aneg_done(phydev);
832 if (err < 0)
833 break;
834
835 /* err > 0 if AN is done.
836 * Otherwise, it's 0, and we're
837 * still waiting for AN */
838 if (err > 0) {
839 phydev->state = PHY_RUNNING;
840 } else {
841 phydev->state = PHY_AN;
842 phydev->link_timeout = PHY_AN_TIMEOUT;
843 }
844 } else
845 phydev->state = PHY_RUNNING;
846 break;
847 }
848
849 spin_unlock(&phydev->lock);
850
851 if (needs_aneg)
852 err = phy_start_aneg(phydev);
853
854 if (err < 0)
855 phy_error(phydev);
856
857 mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ);
858}
859
860#endif /* CONFIG_PHYCONTROL */
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index f0595af4c837..c11138330fed 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -39,6 +39,19 @@
39#include <asm/irq.h> 39#include <asm/irq.h>
40#include <asm/uaccess.h> 40#include <asm/uaccess.h>
41 41
42static int genphy_config_init(struct phy_device *phydev);
43
44static struct phy_driver genphy_driver = {
45 .phy_id = 0xffffffff,
46 .phy_id_mask = 0xffffffff,
47 .name = "Generic PHY",
48 .config_init = genphy_config_init,
49 .features = 0,
50 .config_aneg = genphy_config_aneg,
51 .read_status = genphy_read_status,
52 .driver = {.owner = THIS_MODULE, },
53};
54
42/* get_phy_device 55/* get_phy_device
43 * 56 *
44 * description: Reads the ID registers of the PHY at addr on the 57 * description: Reads the ID registers of the PHY at addr on the
@@ -656,27 +669,32 @@ void phy_driver_unregister(struct phy_driver *drv)
656} 669}
657EXPORT_SYMBOL(phy_driver_unregister); 670EXPORT_SYMBOL(phy_driver_unregister);
658 671
659static struct phy_driver genphy_driver = {
660 .phy_id = 0xffffffff,
661 .phy_id_mask = 0xffffffff,
662 .name = "Generic PHY",
663 .config_init = genphy_config_init,
664 .features = 0,
665 .config_aneg = genphy_config_aneg,
666 .read_status = genphy_read_status,
667 .driver = {.owner = THIS_MODULE, },
668};
669 672
670static int __init genphy_init(void) 673static int __init phy_init(void)
671{ 674{
672 return phy_driver_register(&genphy_driver); 675 int rc;
676 extern int mdio_bus_init(void);
677
678 rc = phy_driver_register(&genphy_driver);
679 if (rc)
680 goto out;
681
682 rc = mdio_bus_init();
683 if (rc)
684 goto out_unreg;
673 685
686 return 0;
687
688out_unreg:
689 phy_driver_unregister(&genphy_driver);
690out:
691 return rc;
674} 692}
675 693
676static void __exit genphy_exit(void) 694static void __exit phy_exit(void)
677{ 695{
678 phy_driver_unregister(&genphy_driver); 696 phy_driver_unregister(&genphy_driver);
679} 697}
680 698
681module_init(genphy_init); 699module_init(phy_init);
682module_exit(genphy_exit); 700module_exit(phy_exit);
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-23 14:34:07 -0500