53 files changed, 3325 insertions, 1316 deletions
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 2819de79442c..80e8ca013e44 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -17,172 +17,6 @@
        410 Severn Ave., Suite 210
        Annapolis MD 21403
-        Linux Kernel Additions:
-        
-        0.99H+lk0.9 - David S. Miller - softnet, PCI DMA updates
-        0.99H+lk1.0 - Jeff Garzik <jgarzik@pobox.com>
-                Remove compatibility defines for kernel versions < 2.2.x.
-                Update for new 2.3.x module interface
-        LK1.1.2 (March 19, 2000)
-        * New PCI interface (jgarzik)
-    LK1.1.3 25 April 2000, Andrew Morton <andrewm@uow.edu.au>
-    - Merged with 3c575_cb.c
-    - Don't set RxComplete in boomerang interrupt enable reg
-    - spinlock in vortex_timer to protect mdio functions
-    - disable local interrupts around call to vortex_interrupt in
-      vortex_tx_timeout() (So vortex_interrupt can use spin_lock())
-    - Select window 3 in vortex_timer()'s write to Wn3_MAC_Ctrl
-    - In vortex_start_xmit(), move the lock to _after_ we've altered
-      vp->cur_tx and vp->tx_full.  This defeats the race between
-      vortex_start_xmit() and vortex_interrupt which was identified
-      by Bogdan Costescu.
-    - Merged back support for six new cards from various sources
-    - Set vortex_have_pci if pci_module_init returns zero (fixes cardbus
-      insertion oops)
-    - Tell it that 3c905C has NWAY for 100bT autoneg
-    - Fix handling of SetStatusEnd in 'Too much work..' code, as
-      per 2.3.99's 3c575_cb (Dave Hinds).
-    - Split ISR into two for vortex & boomerang
-    - Fix MOD_INC/DEC races
-    - Handle resource allocation failures.
-    - Fix 3CCFE575CT LED polarity
-    - Make tx_interrupt_mitigation the default
-    LK1.1.4 25 April 2000, Andrew Morton <andrewm@uow.edu.au>    
-    - Add extra TxReset to vortex_up() to fix 575_cb hotplug initialisation probs.
-    - Put vortex_info_tbl into __devinitdata
-    - In the vortex_error StatsFull HACK, disable stats in vp->intr_enable as well
-      as in the hardware.
-    - Increased the loop counter in issue_and_wait from 2,000 to 4,000.
-    LK1.1.5 28 April 2000, andrewm
-    - Added powerpc defines (John Daniel <jdaniel@etresoft.com> said these work...)
-    - Some extra diagnostics
-    - In vortex_error(), reset the Tx on maxCollisions.  Otherwise most
-      chips usually get a Tx timeout.
-    - Added extra_reset module parm
-    - Replaced some inline timer manip with mod_timer
-      (Franois romieu <Francois.Romieu@nic.fr>)
-    - In vortex_up(), don't make Wn3_config initialisation dependent upon has_nway
-      (this came across from 3c575_cb).
-    LK1.1.6 06 Jun 2000, andrewm
-    - Backed out the PPC defines.
-    - Use del_timer_sync(), mod_timer().
-    - Fix wrapped ulong comparison in boomerang_rx()
-    - Add IS_TORNADO, use it to suppress 3c905C checksum error msg
-      (Donald Becker, I Lee Hetherington <ilh@sls.lcs.mit.edu>)
-    - Replace union wn3_config with BFINS/BFEXT manipulation for
-      sparc64 (Pete Zaitcev, Peter Jones)
-    - In vortex_error, do_tx_reset and vortex_tx_timeout(Vortex):
-      do a netif_wake_queue() to better recover from errors. (Anders Pedersen,
-      Donald Becker)
-    - Print a warning on out-of-memory (rate limited to 1 per 10 secs)
-    - Added two more Cardbus 575 NICs: 5b57 and 6564 (Paul Wagland)
-    LK1.1.7 2 Jul 2000 andrewm
-    - Better handling of shared IRQs
-    - Reset the transmitter on a Tx reclaim error
-    - Fixed crash under OOM during vortex_open() (Mark Hemment)
-    - Fix Rx cessation problem during OOM (help from Mark Hemment)
-    - The spinlocks around the mdio access were blocking interrupts for 300uS.
-      Fix all this to use spin_lock_bh() within mdio_read/write
-    - Only write to TxFreeThreshold if it's a boomerang - other NICs don't
-      have one.
-    - Added 802.3x MAC-layer flow control support
-   LK1.1.8 13 Aug 2000 andrewm
-    - Ignore request_region() return value - already reserved if Cardbus.
-    - Merged some additional Cardbus flags from Don's 0.99Qk
-    - Some fixes for 3c556 (Fred Maciel)
-    - Fix for EISA initialisation (Jan Rekorajski)
-    - Renamed MII_XCVR_PWR and EEPROM_230 to align with 3c575_cb and D. Becker's drivers
-    - Fixed MII_XCVR_PWR for 3CCFE575CT
-    - Added INVERT_LED_PWR, used it.
-    - Backed out the extra_reset stuff
-   LK1.1.9 12 Sep 2000 andrewm
-    - Backed out the tx_reset_resume flags.  It was a no-op.
-    - In vortex_error, don't reset the Tx on txReclaim errors
-    - In vortex_error, don't reset the Tx on maxCollisions errors.
-      Hence backed out all the DownListPtr logic here.
-    - In vortex_error, give Tornado cards a partial TxReset on
-      maxCollisions (David Hinds).  Defined MAX_COLLISION_RESET for this.
-    - Redid some driver flags and device names based on pcmcia_cs-3.1.20.
-    - Fixed a bug where, if vp->tx_full is set when the interface
-      is downed, it remains set when the interface is upped.  Bad
-      things happen.
-   LK1.1.10 17 Sep 2000 andrewm
-    - Added EEPROM_8BIT for 3c555 (Fred Maciel)
-    - Added experimental support for the 3c556B Laptop Hurricane (Louis Gerbarg)
-    - Add HAS_NWAY to "3c900 Cyclone 10Mbps TPO"
-   LK1.1.11 13 Nov 2000 andrewm
-    - Dump MOD_INC/DEC_USE_COUNT, use SET_MODULE_OWNER
-   LK1.1.12 1 Jan 2001 andrewm (2.4.0-pre1)
-    - Call pci_enable_device before we request our IRQ (Tobias Ringstrom)
-    - Add 3c590 PCI latency timer hack to vortex_probe1 (from 0.99Ra)
-    - Added extended issue_and_wait for the 3c905CX.
-    - Look for an MII on PHY index 24 first (3c905CX oddity).
-    - Add HAS_NWAY to 3cSOHO100-TX (Brett Frankenberger)
-    - Don't free skbs we don't own on oom path in vortex_open().
-   LK1.1.13 27 Jan 2001
-    - Added explicit `medialock' flag so we can truly
-      lock the media type down with `options'.
-    - "check ioremap return and some tidbits" (Arnaldo Carvalho de Melo <acme@conectiva.com.br>)
-    - Added and used EEPROM_NORESET for 3c556B PM resumes.
-    - Fixed leakage of vp->rx_ring.
-    - Break out separate HAS_HWCKSM device capability flag.
-    - Kill vp->tx_full (ANK)
-    - Merge zerocopy fragment handling (ANK?)
-   LK1.1.14 15 Feb 2001
-    - Enable WOL.  Can be turned on with `enable_wol' module option.
-    - EISA and PCI initialisation fixes (jgarzik, Manfred Spraul)
-    - If a device's internalconfig register reports it has NWAY,
-      use it, even if autoselect is enabled.
-   LK1.1.15 6 June 2001 akpm
-    - Prevent double counting of received bytes (Lars Christensen)
-    - Add ethtool support (jgarzik)
-    - Add module parm descriptions (Andrzej M. Krzysztofowicz)
-    - Implemented alloc_etherdev() API
-    - Special-case the 'Tx error 82' message.
-   LK1.1.16 18 July 2001 akpm
-    - Make NETIF_F_SG dependent upon nr_free_highpages(), not on CONFIG_HIGHMEM
-    - Lessen verbosity of bootup messages
-    - Fix WOL - use new PM API functions.
-    - Use netif_running() instead of vp->open in suspend/resume.
-    - Don't reset the interface logic on open/close/rmmod.  It upsets
-      autonegotiation, and hence DHCP (from 0.99T).
-    - Back out EEPROM_NORESET flag because of the above (we do it for all
-      NICs).
-    - Correct 3c982 identification string
-    - Rename wait_for_completion() to issue_and_wait() to avoid completion.h
-      clash.
-   LK1.1.17 18Dec01 akpm
-    - PCI ID 9805 is a Python-T, not a dual-port Cyclone.  Apparently.
-      And it has NWAY.
-    - Mask our advertised modes (vp->advertising) with our capabilities
-          (MII reg5) when deciding which duplex mode to use.
-    - Add `global_options' as default for options[].  Ditto global_enable_wol,
-      global_full_duplex.
-   LK1.1.18 01Jul02 akpm
-    - Fix for undocumented transceiver power-up bit on some 3c566B's
-      (Donald Becker, Rahul Karnik)
-    - See http://www.zip.com.au/~akpm/linux/#3c59x-2.3 for more details.
-    - Also see Documentation/networking/vortex.txt
-   LK1.1.19 10Nov02 Marc Zyngier <maz@wild-wind.fr.eu.org>
-    - EISA sysfs integration.
 */
 /*
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index d2150baa7e35..1428bb7715af 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1916,7 +1916,7 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
        regs = ioremap(pciaddr, CP_REGS_SIZE);
        if (!regs) {
                rc = -EIO;
-                dev_err(&pdev->dev, "Cannot map PCI MMIO (%lx@%lx)\n",
+                dev_err(&pdev->dev, "Cannot map PCI MMIO (%Lx@%Lx)\n",
                       (unsigned long long)pci_resource_len(pdev, 1),
                       (unsigned long long)pciaddr);
                goto err_out_res;
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index cd9718512d1c..e4f4eaff7679 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -1709,6 +1709,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
        void __iomem *ioaddr = tp->mmio_addr;
        unsigned int entry;
        unsigned int len = skb->len;
+        unsigned long flags;
        /* Calculate the next Tx descriptor entry. */
        entry = tp->cur_tx % NUM_TX_DESC;
@@ -1725,7 +1726,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
                return 0;
        }
-        spin_lock_irq(&tp->lock);
+        spin_lock_irqsave(&tp->lock, flags);
        RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
                   tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
@@ -1736,7 +1737,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
        if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
                netif_stop_queue (dev);
-        spin_unlock_irq(&tp->lock);
+        spin_unlock_irqrestore(&tp->lock, flags);
        if (netif_msg_tx_queued(tp))
                printk (KERN_DEBUG "%s: Queued Tx packet size %u to slot %d.\n",
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 64b6a72b4f6a..db73de0d2511 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1639,7 +1639,7 @@ bnx2_tx_int(struct bnx2 *bp)
                skb = tx_buf->skb;
 #ifdef BCM_TSO 
                /* partial BD completions possible with TSO packets */
-                if (skb_shinfo(skb)->gso_size) {
+                if (skb_is_gso(skb)) {
                        u16 last_idx, last_ring_idx;
                        last_idx = sw_cons +
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 87f94d939ff8..61b3754f50ff 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1417,7 +1417,7 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
        struct cpl_tx_pkt *cpl;
 #ifdef NETIF_F_TSO
-        if (skb_shinfo(skb)->gso_size) {
+        if (skb_is_gso(skb)) {
                int eth_type;
                struct cpl_tx_pkt_lso *hdr;
diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c
index 36d511729f71..2146cf74425e 100644
--- a/drivers/net/dummy.c
+++ b/drivers/net/dummy.c
@@ -132,6 +132,7 @@ static int __init dummy_init_module(void)
        for (i = 0; i < numdummies && !err; i++)
                err = dummy_init_one(i); 
        if (err) { 
+                i--;
                while (--i >= 0)
                        dummy_free_one(i);
        }
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 3042d33e2d4d..d304297c496c 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -68,7 +68,6 @@
 #ifdef NETIF_F_TSO
 #include <net/checksum.h>
 #endif
-#include <linux/workqueue.h>
 #include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
@@ -111,6 +110,9 @@ struct e1000_adapter;
 #define E1000_MIN_RXD                       80
 #define E1000_MAX_82544_RXD               4096
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
 /* Supported Rx Buffer Sizes */
 #define E1000_RXBUFFER_128   128    /* Used for packet split */
 #define E1000_RXBUFFER_256   256    /* Used for packet split */
@@ -143,6 +145,7 @@ struct e1000_adapter;
 #define AUTO_ALL_MODES            0
 #define E1000_EEPROM_82544_APM    0x0004
+#define E1000_EEPROM_ICH8_APME    0x0004
 #define E1000_EEPROM_APME         0x0400
 #ifndef E1000_MASTER_SLAVE
@@ -254,7 +257,6 @@ struct e1000_adapter {
        spinlock_t tx_queue_lock;
 #endif
        atomic_t irq_sem;
-        struct work_struct watchdog_task;
        struct work_struct reset_task;
        uint8_t fc_autoneg;
@@ -339,8 +341,14 @@ struct e1000_adapter {
 #ifdef NETIF_F_TSO
        boolean_t tso_force;
 #endif
+        boolean_t smart_power_down;     /* phy smart power down */
+        unsigned long flags;
 };
+enum e1000_state_t {
+        __E1000_DRIVER_TESTING,
+        __E1000_RESETTING,
+};
 /*  e1000_main.c  */
 extern char e1000_driver_name[];
@@ -348,6 +356,7 @@ extern char e1000_driver_version[];
 int e1000_up(struct e1000_adapter *adapter);
 void e1000_down(struct e1000_adapter *adapter);
 void e1000_reset(struct e1000_adapter *adapter);
+void e1000_reinit_locked(struct e1000_adapter *adapter);
 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index d19664891768..88a82ba88f57 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -109,7 +109,8 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
                                   SUPPORTED_1000baseT_Full|
                                   SUPPORTED_Autoneg |
                                   SUPPORTED_TP);
+                if (hw->phy_type == e1000_phy_ife)
+                        ecmd->supported &= ~SUPPORTED_1000baseT_Full;
                ecmd->advertising = ADVERTISED_TP;
                if (hw->autoneg == 1) {
@@ -203,11 +204,9 @@ e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
        /* reset the link */
-        if (netif_running(adapter->netdev)) {
+        if (netif_running(adapter->netdev))
-                e1000_down(adapter);
+                e1000_reinit_locked(adapter);
-                e1000_reset(adapter);
+        else
-                e1000_up(adapter);
-        } else
                e1000_reset(adapter);
        return 0;
@@ -254,10 +253,9 @@ e1000_set_pauseparam(struct net_device *netdev,
        hw->original_fc = hw->fc;
        if (adapter->fc_autoneg == AUTONEG_ENABLE) {
-                if (netif_running(adapter->netdev)) {
+                if (netif_running(adapter->netdev))
-                        e1000_down(adapter);
+                        e1000_reinit_locked(adapter);
-                        e1000_up(adapter);
+                else
-                } else
                        e1000_reset(adapter);
        } else
                return ((hw->media_type == e1000_media_type_fiber) ?
@@ -279,10 +277,9 @@ e1000_set_rx_csum(struct net_device *netdev, uint32_t data)
        struct e1000_adapter *adapter = netdev_priv(netdev);
        adapter->rx_csum = data;
-        if (netif_running(netdev)) {
+        if (netif_running(netdev))
-                e1000_down(adapter);
+                e1000_reinit_locked(adapter);
-                e1000_up(adapter);
+        else
-        } else
                e1000_reset(adapter);
        return 0;
 }
@@ -577,6 +574,7 @@ e1000_get_drvinfo(struct net_device *netdev,
        case e1000_82572:
        case e1000_82573:
        case e1000_80003es2lan:
+        case e1000_ich8lan:
                sprintf(firmware_version, "%d.%d-%d",
                        (eeprom_data & 0xF000) >> 12,
                        (eeprom_data & 0x0FF0) >> 4,
@@ -631,6 +629,9 @@ e1000_set_ringparam(struct net_device *netdev,
        tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
        rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
+        while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+                msleep(1);
        if (netif_running(adapter->netdev))
                e1000_down(adapter);
@@ -691,9 +692,11 @@ e1000_set_ringparam(struct net_device *netdev,
                adapter->rx_ring = rx_new;
                adapter->tx_ring = tx_new;
                if ((err = e1000_up(adapter)))
-                        return err;
+                        goto err_setup;
        }
+        clear_bit(__E1000_RESETTING, &adapter->flags);
        return 0;
 err_setup_tx:
        e1000_free_all_rx_resources(adapter);
@@ -701,6 +704,8 @@ err_setup_rx:
        adapter->rx_ring = rx_old;
        adapter->tx_ring = tx_old;
        e1000_up(adapter);
+err_setup:
+        clear_bit(__E1000_RESETTING, &adapter->flags);
        return err;
 }
@@ -754,6 +759,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
                toggle = 0x7FFFF3FF;
                break;
        case e1000_82573:
+        case e1000_ich8lan:
                toggle = 0x7FFFF033;
                break;
        default:
@@ -773,11 +779,12 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
        }
        /* restore previous status */
        E1000_WRITE_REG(&adapter->hw, STATUS, before);
+        if (adapter->hw.mac_type != e1000_ich8lan) {
-        REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
+                REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
-        REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
+                REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
-        REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
+                REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
-        REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
+                REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
+        }
        REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
        REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
        REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF);
@@ -790,20 +797,22 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
        REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF);
        REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
-        REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0x003FFFFB);
+        before = (adapter->hw.mac_type == e1000_ich8lan ?
+                        0x06C3B33E : 0x06DFB3FE);
+        REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
        REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
        if (adapter->hw.mac_type >= e1000_82543) {
-                REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0xFFFFFFFF);
+                REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
                REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
-                REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
+                if (adapter->hw.mac_type != e1000_ich8lan)
+                        REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
                REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
                REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
+                value = (adapter->hw.mac_type == e1000_ich8lan ?
-                for (i = 0; i < E1000_RAR_ENTRIES; i++) {
+                                E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES);
-                        REG_PATTERN_TEST(RA + ((i << 1) << 2), 0xFFFFFFFF,
+                for (i = 0; i < value; i++) {
-                                         0xFFFFFFFF);
                        REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
                                         0xFFFFFFFF);
                }
@@ -817,7 +826,9 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
        }
-        for (i = 0; i < E1000_MC_TBL_SIZE; i++)
+        value = (adapter->hw.mac_type == e1000_ich8lan ?
+                        E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE);
+        for (i = 0; i < value; i++)
                REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
        *data = 0;
@@ -889,6 +900,8 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
        /* Test each interrupt */
        for (; i < 10; i++) {
+                if (adapter->hw.mac_type == e1000_ich8lan && i == 8)
+                        continue;
                /* Interrupt to test */
                mask = 1 << i;
@@ -1246,18 +1259,33 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
        } else if (adapter->hw.phy_type == e1000_phy_gg82563) {
                e1000_write_phy_reg(&adapter->hw,
                                    GG82563_PHY_KMRN_MODE_CTRL,
-                                    0x1CE);
+                                    0x1CC);
        }
-        /* force 1000, set loopback */
-        e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140);
-        /* Now set up the MAC to the same speed/duplex as the PHY. */
        ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
-        ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
-        ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+        if (adapter->hw.phy_type == e1000_phy_ife) {
-                     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+                /* force 100, set loopback */
-                     E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+                e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x6100);
-                     E1000_CTRL_FD);     /* Force Duplex to FULL */
+                /* Now set up the MAC to the same speed/duplex as the PHY. */
+                ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+                ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+                             E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+                             E1000_CTRL_SPD_100 |/* Force Speed to 100 */
+                             E1000_CTRL_FD);     /* Force Duplex to FULL */
+        } else {
+                /* force 1000, set loopback */
+                e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140);
+                /* Now set up the MAC to the same speed/duplex as the PHY. */
+                ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
+                ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+                ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+                             E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+                             E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+                             E1000_CTRL_FD);     /* Force Duplex to FULL */
+        }
        if (adapter->hw.media_type == e1000_media_type_copper &&
           adapter->hw.phy_type == e1000_phy_m88) {
@@ -1317,6 +1345,7 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter)
        case e1000_82572:
        case e1000_82573:
        case e1000_80003es2lan:
+        case e1000_ich8lan:
                return e1000_integrated_phy_loopback(adapter);
                break;
@@ -1568,6 +1597,7 @@ e1000_diag_test(struct net_device *netdev,
        struct e1000_adapter *adapter = netdev_priv(netdev);
        boolean_t if_running = netif_running(netdev);
+        set_bit(__E1000_DRIVER_TESTING, &adapter->flags);
        if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
                /* Offline tests */
@@ -1582,7 +1612,8 @@ e1000_diag_test(struct net_device *netdev,
                        eth_test->flags |= ETH_TEST_FL_FAILED;
                if (if_running)
-                        e1000_down(adapter);
+                        /* indicate we're in test mode */
+                        dev_close(netdev);
                else
                        e1000_reset(adapter);
@@ -1607,8 +1638,9 @@ e1000_diag_test(struct net_device *netdev,
                adapter->hw.autoneg = autoneg;
                e1000_reset(adapter);
+                clear_bit(__E1000_DRIVER_TESTING, &adapter->flags);
                if (if_running)
-                        e1000_up(adapter);
+                        dev_open(netdev);
        } else {
                /* Online tests */
                if (e1000_link_test(adapter, &data[4]))
@@ -1619,6 +1651,8 @@ e1000_diag_test(struct net_device *netdev,
                data[1] = 0;
                data[2] = 0;
                data[3] = 0;
+                clear_bit(__E1000_DRIVER_TESTING, &adapter->flags);
        }
        msleep_interruptible(4 * 1000);
 }
@@ -1778,21 +1812,18 @@ e1000_phys_id(struct net_device *netdev, uint32_t data)
                mod_timer(&adapter->blink_timer, jiffies);
                msleep_interruptible(data * 1000);
                del_timer_sync(&adapter->blink_timer);
-        } else if (adapter->hw.mac_type < e1000_82573) {
+        } else if (adapter->hw.phy_type == e1000_phy_ife) {
-                E1000_WRITE_REG(&adapter->hw, LEDCTL,
+                if (!adapter->blink_timer.function) {
-                        (E1000_LEDCTL_LED2_BLINK_RATE |
+                        init_timer(&adapter->blink_timer);
-                         E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK |
+                        adapter->blink_timer.function = e1000_led_blink_callback;
-                         (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
+                        adapter->blink_timer.data = (unsigned long) adapter;
-                         (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) |
+                }
-                         (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT)));
+                mod_timer(&adapter->blink_timer, jiffies);
                msleep_interruptible(data * 1000);
+                del_timer_sync(&adapter->blink_timer);
+                e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0);
        } else {
-                E1000_WRITE_REG(&adapter->hw, LEDCTL,
+                e1000_blink_led_start(&adapter->hw);
-                        (E1000_LEDCTL_LED2_BLINK_RATE |
-                         E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK |
-                         (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
-                         (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED1_MODE_SHIFT) |
-                         (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED0_MODE_SHIFT)));
                msleep_interruptible(data * 1000);
        }
@@ -1807,10 +1838,8 @@ static int
 e1000_nway_reset(struct net_device *netdev)
 {
        struct e1000_adapter *adapter = netdev_priv(netdev);
-        if (netif_running(netdev)) {
+        if (netif_running(netdev))
-                e1000_down(adapter);
+                e1000_reinit_locked(adapter);
-                e1000_up(adapter);
-        }
        return 0;
 }
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 3959039b16ec..583518ae49ce 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -101,7 +101,8 @@ static void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset,
 #define E1000_WRITE_REG_IO(a, reg, val) \
            e1000_write_reg_io((a), E1000_##reg, val)
-static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw);
+static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw,
+                                               uint16_t duplex);
 static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
 /* IGP cable length table */
@@ -156,6 +157,14 @@ e1000_set_phy_type(struct e1000_hw *hw)
            hw->phy_type = e1000_phy_igp;
            break;
        }
+    case IGP03E1000_E_PHY_ID:
+        hw->phy_type = e1000_phy_igp_3;
+        break;
+    case IFE_E_PHY_ID:
+    case IFE_PLUS_E_PHY_ID:
+    case IFE_C_E_PHY_ID:
+        hw->phy_type = e1000_phy_ife;
+        break;
    case GG82563_E_PHY_ID:
        if (hw->mac_type == e1000_80003es2lan) {
            hw->phy_type = e1000_phy_gg82563;
@@ -332,6 +341,7 @@ e1000_set_mac_type(struct e1000_hw *hw)
        break;
    case E1000_DEV_ID_82541EI:
    case E1000_DEV_ID_82541EI_MOBILE:
+    case E1000_DEV_ID_82541ER_LOM:
        hw->mac_type = e1000_82541;
        break;
    case E1000_DEV_ID_82541ER:
@@ -341,6 +351,7 @@ e1000_set_mac_type(struct e1000_hw *hw)
        hw->mac_type = e1000_82541_rev_2;
        break;
    case E1000_DEV_ID_82547EI:
+    case E1000_DEV_ID_82547EI_MOBILE:
        hw->mac_type = e1000_82547;
        break;
    case E1000_DEV_ID_82547GI:
@@ -354,6 +365,7 @@ e1000_set_mac_type(struct e1000_hw *hw)
    case E1000_DEV_ID_82572EI_COPPER:
    case E1000_DEV_ID_82572EI_FIBER:
    case E1000_DEV_ID_82572EI_SERDES:
+    case E1000_DEV_ID_82572EI:
        hw->mac_type = e1000_82572;
        break;
    case E1000_DEV_ID_82573E:
@@ -361,16 +373,29 @@ e1000_set_mac_type(struct e1000_hw *hw)
    case E1000_DEV_ID_82573L:
        hw->mac_type = e1000_82573;
        break;
+    case E1000_DEV_ID_80003ES2LAN_COPPER_SPT:
+    case E1000_DEV_ID_80003ES2LAN_SERDES_SPT:
    case E1000_DEV_ID_80003ES2LAN_COPPER_DPT:
    case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
        hw->mac_type = e1000_80003es2lan;
        break;
+    case E1000_DEV_ID_ICH8_IGP_M_AMT:
+    case E1000_DEV_ID_ICH8_IGP_AMT:
+    case E1000_DEV_ID_ICH8_IGP_C:
+    case E1000_DEV_ID_ICH8_IFE:
+    case E1000_DEV_ID_ICH8_IGP_M:
+        hw->mac_type = e1000_ich8lan;
+        break;
    default:
        /* Should never have loaded on this device */
        return -E1000_ERR_MAC_TYPE;
    }
    switch(hw->mac_type) {
+    case e1000_ich8lan:
+        hw->swfwhw_semaphore_present = TRUE;
+        hw->asf_firmware_present = TRUE;
+        break;
    case e1000_80003es2lan:
        hw->swfw_sync_present = TRUE;
        /* fall through */
@@ -423,6 +448,7 @@ e1000_set_media_type(struct e1000_hw *hw)
        case e1000_82542_rev2_1:
            hw->media_type = e1000_media_type_fiber;
            break;
+        case e1000_ich8lan:
        case e1000_82573:
            /* The STATUS_TBIMODE bit is reserved or reused for the this
             * device.
@@ -527,6 +553,14 @@ e1000_reset_hw(struct e1000_hw *hw)
        } while(timeout);
    }
+    /* Workaround for ICH8 bit corruption issue in FIFO memory */
+    if (hw->mac_type == e1000_ich8lan) {
+        /* Set Tx and Rx buffer allocation to 8k apiece. */
+        E1000_WRITE_REG(hw, PBA, E1000_PBA_8K);
+        /* Set Packet Buffer Size to 16k. */
+        E1000_WRITE_REG(hw, PBS, E1000_PBS_16K);
+    }
    /* Issue a global reset to the MAC.  This will reset the chip's
     * transmit, receive, DMA, and link units.  It will not effect
     * the current PCI configuration.  The global reset bit is self-
@@ -550,6 +584,20 @@ e1000_reset_hw(struct e1000_hw *hw)
            /* Reset is performed on a shadow of the control register */
            E1000_WRITE_REG(hw, CTRL_DUP, (ctrl | E1000_CTRL_RST));
            break;
+        case e1000_ich8lan:
+            if (!hw->phy_reset_disable &&
+                e1000_check_phy_reset_block(hw) == E1000_SUCCESS) {
+                /* e1000_ich8lan PHY HW reset requires MAC CORE reset
+                 * at the same time to make sure the interface between
+                 * MAC and the external PHY is reset.
+                 */
+                ctrl |= E1000_CTRL_PHY_RST;
+            }
+            e1000_get_software_flag(hw);
+            E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST));
+            msec_delay(5);
+            break;
        default:
            E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST));
            break;
@@ -591,6 +639,7 @@ e1000_reset_hw(struct e1000_hw *hw)
            /* fall through */
        case e1000_82571:
        case e1000_82572:
+        case e1000_ich8lan:
        case e1000_80003es2lan:
            ret_val = e1000_get_auto_rd_done(hw);
            if(ret_val)
@@ -633,6 +682,12 @@ e1000_reset_hw(struct e1000_hw *hw)
            e1000_pci_set_mwi(hw);
    }
+    if (hw->mac_type == e1000_ich8lan) {
+        uint32_t kab = E1000_READ_REG(hw, KABGTXD);
+        kab |= E1000_KABGTXD_BGSQLBIAS;
+        E1000_WRITE_REG(hw, KABGTXD, kab);
+    }
    return E1000_SUCCESS;
 }
@@ -675,9 +730,12 @@ e1000_init_hw(struct e1000_hw *hw)
    /* Disabling VLAN filtering. */
    DEBUGOUT("Initializing the IEEE VLAN\n");
-    if (hw->mac_type < e1000_82545_rev_3)
+    /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */
-        E1000_WRITE_REG(hw, VET, 0);
+    if (hw->mac_type != e1000_ich8lan) {
-    e1000_clear_vfta(hw);
+        if (hw->mac_type < e1000_82545_rev_3)
+            E1000_WRITE_REG(hw, VET, 0);
+        e1000_clear_vfta(hw);
+    }
    /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
    if(hw->mac_type == e1000_82542_rev2_0) {
@@ -705,8 +763,14 @@ e1000_init_hw(struct e1000_hw *hw)
    /* Zero out the Multicast HASH table */
    DEBUGOUT("Zeroing the MTA\n");
    mta_size = E1000_MC_TBL_SIZE;
-    for(i = 0; i < mta_size; i++)
+    if (hw->mac_type == e1000_ich8lan)
+        mta_size = E1000_MC_TBL_SIZE_ICH8LAN;
+    for(i = 0; i < mta_size; i++) {
        E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+        /* use write flush to prevent Memory Write Block (MWB) from
+         * occuring when accessing our register space */
+        E1000_WRITE_FLUSH(hw);
+    }
    /* Set the PCI priority bit correctly in the CTRL register.  This
     * determines if the adapter gives priority to receives, or if it
@@ -744,6 +808,10 @@ e1000_init_hw(struct e1000_hw *hw)
        break;
    }
+    /* More time needed for PHY to initialize */
+    if (hw->mac_type == e1000_ich8lan)
+        msec_delay(15);
    /* Call a subroutine to configure the link and setup flow control. */
    ret_val = e1000_setup_link(hw);
@@ -757,6 +825,7 @@ e1000_init_hw(struct e1000_hw *hw)
        case e1000_82571:
        case e1000_82572:
        case e1000_82573:
+        case e1000_ich8lan:
        case e1000_80003es2lan:
            ctrl |= E1000_TXDCTL_COUNT_DESC;
            break;
@@ -795,6 +864,7 @@ e1000_init_hw(struct e1000_hw *hw)
        /* Fall through */
    case e1000_82571:
    case e1000_82572:
+    case e1000_ich8lan:
        ctrl = E1000_READ_REG(hw, TXDCTL1);
        ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
        if(hw->mac_type >= e1000_82571)
@@ -818,6 +888,11 @@ e1000_init_hw(struct e1000_hw *hw)
     */
    e1000_clear_hw_cntrs(hw);
+    /* ICH8 No-snoop bits are opposite polarity.
+     * Set to snoop by default after reset. */
+    if (hw->mac_type == e1000_ich8lan)
+        e1000_set_pci_ex_no_snoop(hw, PCI_EX_82566_SNOOP_ALL);
    if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
        hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
        ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
@@ -905,6 +980,7 @@ e1000_setup_link(struct e1000_hw *hw)
     */
    if (hw->fc == e1000_fc_default) {
        switch (hw->mac_type) {
+        case e1000_ich8lan:
        case e1000_82573:
            hw->fc = e1000_fc_full;
            break;
@@ -971,9 +1047,12 @@ e1000_setup_link(struct e1000_hw *hw)
     */
    DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
-    E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW);
+    /* FCAL/H and FCT are hardcoded to standard values in e1000_ich8lan. */
-    E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+    if (hw->mac_type != e1000_ich8lan) {
-    E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE);
+        E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE);
+        E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+        E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW);
+    }
    E1000_WRITE_REG(hw, FCTTV, hw->fc_pause_time);
@@ -1237,12 +1316,13 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
    /* Wait 10ms for MAC to configure PHY from eeprom settings */
    msec_delay(15);
+    if (hw->mac_type != e1000_ich8lan) {
    /* Configure activity LED after PHY reset */
    led_ctrl = E1000_READ_REG(hw, LEDCTL);
    led_ctrl &= IGP_ACTIVITY_LED_MASK;
    led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
    E1000_WRITE_REG(hw, LEDCTL, led_ctrl);
+    }
    /* disable lplu d3 during driver init */
    ret_val = e1000_set_d3_lplu_state(hw, FALSE);
@@ -1478,8 +1558,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw)
            if (ret_val)
                return ret_val;
-            /* Enable Pass False Carrier on the PHY */
+            phy_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
-            phy_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
            ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
                                          phy_data);
@@ -1561,28 +1640,40 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw)
    phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
    if(hw->disable_polarity_correction == 1)
        phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
-        ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-        if(ret_val)
+    if (ret_val)
-            return ret_val;
-    /* Force TX_CLK in the Extended PHY Specific Control Register
-     * to 25MHz clock.
-     */
-    ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
-    if(ret_val)
        return ret_val;
-    phy_data |= M88E1000_EPSCR_TX_CLK_25;
    if (hw->phy_revision < M88E1011_I_REV_4) {
-        /* Configure Master and Slave downshift values */
+        /* Force TX_CLK in the Extended PHY Specific Control Register
-        phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+         * to 25MHz clock.
+         */
+        ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+        if (ret_val)
+            return ret_val;
+        phy_data |= M88E1000_EPSCR_TX_CLK_25;
+        if ((hw->phy_revision == E1000_REVISION_2) &&
+            (hw->phy_id == M88E1111_I_PHY_ID)) {
+            /* Vidalia Phy, set the downshift counter to 5x */
+            phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK);
+            phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+            ret_val = e1000_write_phy_reg(hw,
+                                        M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+            if (ret_val)
+                return ret_val;
+        } else {
+            /* Configure Master and Slave downshift values */
+            phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
                              M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
-        phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+            phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
                             M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
-        ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+            ret_val = e1000_write_phy_reg(hw,
-        if(ret_val)
+                                        M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
-            return ret_val;
+            if (ret_val)
+               return ret_val;
+        }
    }
    /* SW Reset the PHY so all changes take effect */
@@ -1620,6 +1711,10 @@ e1000_copper_link_autoneg(struct e1000_hw *hw)
    if(hw->autoneg_advertised == 0)
        hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+    /* IFE phy only supports 10/100 */
+    if (hw->phy_type == e1000_phy_ife)
+        hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL;
    DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
    ret_val = e1000_phy_setup_autoneg(hw);
    if(ret_val) {
@@ -1717,6 +1812,26 @@ e1000_setup_copper_link(struct e1000_hw *hw)
    DEBUGFUNC("e1000_setup_copper_link");
+    switch (hw->mac_type) {
+    case e1000_80003es2lan:
+    case e1000_ich8lan:
+        /* Set the mac to wait the maximum time between each
+         * iteration and increase the max iterations when
+         * polling the phy; this fixes erroneous timeouts at 10Mbps. */
+        ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF);
+        if (ret_val)
+            return ret_val;
+        ret_val = e1000_read_kmrn_reg(hw, GG82563_REG(0x34, 9), &reg_data);
+        if (ret_val)
+            return ret_val;
+        reg_data |= 0x3F;
+        ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data);
+        if (ret_val)
+            return ret_val;
+    default:
+        break;
+    }
    /* Check if it is a valid PHY and set PHY mode if necessary. */
    ret_val = e1000_copper_link_preconfig(hw);
    if(ret_val)
@@ -1724,10 +1839,8 @@ e1000_setup_copper_link(struct e1000_hw *hw)
    switch (hw->mac_type) {
    case e1000_80003es2lan:
-        ret_val = e1000_read_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL,
+        /* Kumeran registers are written-only */
-                                      &reg_data);
+        reg_data = E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT;
-        if (ret_val)
-            return ret_val;
        reg_data |= E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING;
        ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL,
                                       reg_data);
@@ -1739,6 +1852,7 @@ e1000_setup_copper_link(struct e1000_hw *hw)
    }
    if (hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
        hw->phy_type == e1000_phy_igp_2) {
        ret_val = e1000_copper_link_igp_setup(hw);
        if(ret_val)
@@ -1803,7 +1917,7 @@ e1000_setup_copper_link(struct e1000_hw *hw)
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
 static int32_t
-e1000_configure_kmrn_for_10_100(struct e1000_hw *hw)
+e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex)
 {
    int32_t ret_val = E1000_SUCCESS;
    uint32_t tipg;
@@ -1823,6 +1937,18 @@ e1000_configure_kmrn_for_10_100(struct e1000_hw *hw)
    tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100;
    E1000_WRITE_REG(hw, TIPG, tipg);
+    ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
+    if (ret_val)
+        return ret_val;
+    if (duplex == HALF_DUPLEX)
+        reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
+    else
+        reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+    ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
    return ret_val;
 }
@@ -1847,6 +1973,14 @@ e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
    tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
    E1000_WRITE_REG(hw, TIPG, tipg);
+    ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
+    if (ret_val)
+        return ret_val;
+    reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+    ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
    return ret_val;
 }
@@ -1869,10 +2003,13 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw)
    if(ret_val)
        return ret_val;
-    /* Read the MII 1000Base-T Control Register (Address 9). */
+    if (hw->phy_type != e1000_phy_ife) {
-    ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
+        /* Read the MII 1000Base-T Control Register (Address 9). */
-    if(ret_val)
+        ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
-        return ret_val;
+        if (ret_val)
+            return ret_val;
+    } else
+        mii_1000t_ctrl_reg=0;
    /* Need to parse both autoneg_advertised and fc and set up
     * the appropriate PHY registers.  First we will parse for
@@ -1923,6 +2060,9 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw)
    if(hw->autoneg_advertised & ADVERTISE_1000_FULL) {
        DEBUGOUT("Advertise 1000mb Full duplex\n");
        mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+        if (hw->phy_type == e1000_phy_ife) {
+            DEBUGOUT("e1000_phy_ife is a 10/100 PHY. Gigabit speed is not supported.\n");
+        }
    }
    /* Check for a software override of the flow control settings, and
@@ -1984,9 +2124,11 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw)
    DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
-    ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
+    if (hw->phy_type != e1000_phy_ife) {
-    if(ret_val)
+        ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
-        return ret_val;
+        if (ret_val)
+            return ret_val;
+    }
    return E1000_SUCCESS;
 }
@@ -2089,6 +2231,18 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw)
        /* Need to reset the PHY or these changes will be ignored */
        mii_ctrl_reg |= MII_CR_RESET;
+    /* Disable MDI-X support for 10/100 */
+    } else if (hw->phy_type == e1000_phy_ife) {
+        ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
+        if (ret_val)
+            return ret_val;
+        phy_data &= ~IFE_PMC_AUTO_MDIX;
+        phy_data &= ~IFE_PMC_FORCE_MDIX;
+        ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data);
+        if (ret_val)
+            return ret_val;
    } else {
        /* Clear Auto-Crossover to force MDI manually.  IGP requires MDI
         * forced whenever speed or duplex are forced.
@@ -2721,8 +2875,12 @@ e1000_check_for_link(struct e1000_hw *hw)
         */
        if(hw->tbi_compatibility_en) {
            uint16_t speed, duplex;
-            e1000_get_speed_and_duplex(hw, &speed, &duplex);
+            ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
-            if(speed != SPEED_1000) {
+            if (ret_val) {
+                DEBUGOUT("Error getting link speed and duplex\n");
+                return ret_val;
+            }
+            if (speed != SPEED_1000) {
                /* If link speed is not set to gigabit speed, we do not need
                 * to enable TBI compatibility.
                 */
@@ -2889,7 +3047,13 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw,
        if (*speed == SPEED_1000)
            ret_val = e1000_configure_kmrn_for_1000(hw);
        else
-            ret_val = e1000_configure_kmrn_for_10_100(hw);
+            ret_val = e1000_configure_kmrn_for_10_100(hw, *duplex);
+        if (ret_val)
+            return ret_val;
+    }
+    if ((hw->phy_type == e1000_phy_igp_3) && (*speed == SPEED_1000)) {
+        ret_val = e1000_kumeran_lock_loss_workaround(hw);
        if (ret_val)
            return ret_val;
    }
@@ -3079,6 +3243,9 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask)
    DEBUGFUNC("e1000_swfw_sync_acquire");
+    if (hw->swfwhw_semaphore_present)
+        return e1000_get_software_flag(hw);
    if (!hw->swfw_sync_present)
        return e1000_get_hw_eeprom_semaphore(hw);
@@ -3118,6 +3285,11 @@ e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask)
    DEBUGFUNC("e1000_swfw_sync_release");
+    if (hw->swfwhw_semaphore_present) {
+        e1000_release_software_flag(hw);
+        return;
+    }
    if (!hw->swfw_sync_present) {
        e1000_put_hw_eeprom_semaphore(hw);
        return;
@@ -3160,7 +3332,8 @@ e1000_read_phy_reg(struct e1000_hw *hw,
    if (e1000_swfw_sync_acquire(hw, swfw))
        return -E1000_ERR_SWFW_SYNC;
-    if((hw->phy_type == e1000_phy_igp ||
+    if ((hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
        hw->phy_type == e1000_phy_igp_2) &&
       (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
        ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
@@ -3299,7 +3472,8 @@ e1000_write_phy_reg(struct e1000_hw *hw,
    if (e1000_swfw_sync_acquire(hw, swfw))
        return -E1000_ERR_SWFW_SYNC;
-    if((hw->phy_type == e1000_phy_igp ||
+    if ((hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
        hw->phy_type == e1000_phy_igp_2) &&
       (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
        ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
@@ -3514,7 +3688,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
        E1000_WRITE_FLUSH(hw);
        if (hw->mac_type >= e1000_82571)
-            msec_delay(10);
+            msec_delay_irq(10);
        e1000_swfw_sync_release(hw, swfw);
    } else {
        /* Read the Extended Device Control Register, assert the PHY_RESET_DIR
@@ -3544,6 +3718,12 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
    ret_val = e1000_get_phy_cfg_done(hw);
    e1000_release_software_semaphore(hw);
+        if ((hw->mac_type == e1000_ich8lan) &&
+            (hw->phy_type == e1000_phy_igp_3)) {
+            ret_val = e1000_init_lcd_from_nvm(hw);
+            if (ret_val)
+                return ret_val;
+        }
    return ret_val;
 }
@@ -3572,9 +3752,11 @@ e1000_phy_reset(struct e1000_hw *hw)
    case e1000_82541_rev_2:
    case e1000_82571:
    case e1000_82572:
+    case e1000_ich8lan:
        ret_val = e1000_phy_hw_reset(hw);
        if(ret_val)
            return ret_val;
        break;
    default:
        ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
@@ -3597,11 +3779,120 @@ e1000_phy_reset(struct e1000_hw *hw)
 }
 /******************************************************************************
+* Work-around for 82566 power-down: on D3 entry-
+* 1) disable gigabit link
+* 2) write VR power-down enable
+* 3) read it back
+* if successful continue, else issue LCD reset and repeat
+*
+* hw - struct containing variables accessed by shared code
+******************************************************************************/
+void
+e1000_phy_powerdown_workaround(struct e1000_hw *hw)
+{
+    int32_t reg;
+    uint16_t phy_data;
+    int32_t retry = 0;
+    DEBUGFUNC("e1000_phy_powerdown_workaround");
+    if (hw->phy_type != e1000_phy_igp_3)
+        return;
+    do {
+        /* Disable link */
+        reg = E1000_READ_REG(hw, PHY_CTRL);
+        E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
+                        E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+        /* Write VR power-down enable */
+        e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
+        e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data |
+                            IGP3_VR_CTRL_MODE_SHUT);
+        /* Read it back and test */
+        e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
+        if ((phy_data & IGP3_VR_CTRL_MODE_SHUT) || retry)
+            break;
+        /* Issue PHY reset and repeat at most one more time */
+        reg = E1000_READ_REG(hw, CTRL);
+        E1000_WRITE_REG(hw, CTRL, reg | E1000_CTRL_PHY_RST);
+        retry++;
+    } while (retry);
+    return;
+}
+/******************************************************************************
+* Work-around for 82566 Kumeran PCS lock loss:
+* On link status change (i.e. PCI reset, speed change) and link is up and
+* speed is gigabit-
+* 0) if workaround is optionally disabled do nothing
+* 1) wait 1ms for Kumeran link to come up
+* 2) check Kumeran Diagnostic register PCS lock loss bit
+* 3) if not set the link is locked (all is good), otherwise...
+* 4) reset the PHY
+* 5) repeat up to 10 times
+* Note: this is only called for IGP3 copper when speed is 1gb.
+*
+* hw - struct containing variables accessed by shared code
+******************************************************************************/
+int32_t
+e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
+{
+    int32_t ret_val;
+    int32_t reg;
+    int32_t cnt;
+    uint16_t phy_data;
+    if (hw->kmrn_lock_loss_workaround_disabled)
+        return E1000_SUCCESS;
+    /* Make sure link is up before proceeding. If not just return.
+     * Attempting this while link is negotiating fouls up link
+     * stability */
+    ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+    ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+    if (phy_data & MII_SR_LINK_STATUS) {
+        for (cnt = 0; cnt < 10; cnt++) {
+            /* read once to clear */
+            ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
+            if (ret_val)
+                return ret_val;
+            /* and again to get new status */
+            ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
+            if (ret_val)
+                return ret_val;
+            /* check for PCS lock */
+            if (!(phy_data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS))
+                return E1000_SUCCESS;
+            /* Issue PHY reset */
+            e1000_phy_hw_reset(hw);
+            msec_delay_irq(5);
+        }
+        /* Disable GigE link negotiation */
+        reg = E1000_READ_REG(hw, PHY_CTRL);
+        E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
+                        E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+        /* unable to acquire PCS lock */
+        return E1000_ERR_PHY;
+    }
+    return E1000_SUCCESS;
+}
+/******************************************************************************
 * Probes the expected PHY address for known PHY IDs
 *
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
-static int32_t
+int32_t
 e1000_detect_gig_phy(struct e1000_hw *hw)
 {
    int32_t phy_init_status, ret_val;
@@ -3613,8 +3904,8 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
    /* The 82571 firmware may still be configuring the PHY.  In this
     * case, we cannot access the PHY until the configuration is done.  So
     * we explicitly set the PHY values. */
-    if(hw->mac_type == e1000_82571 ||
+    if (hw->mac_type == e1000_82571 ||
-       hw->mac_type == e1000_82572) {
+        hw->mac_type == e1000_82572) {
        hw->phy_id = IGP01E1000_I_PHY_ID;
        hw->phy_type = e1000_phy_igp_2;
        return E1000_SUCCESS;
@@ -3631,7 +3922,7 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
    /* Read the PHY ID Registers to identify which PHY is onboard. */
    ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
-    if(ret_val)
+    if (ret_val)
        return ret_val;
    hw->phy_id = (uint32_t) (phy_id_high << 16);
@@ -3669,6 +3960,12 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
    case e1000_80003es2lan:
        if (hw->phy_id == GG82563_E_PHY_ID) match = TRUE;
        break;
+    case e1000_ich8lan:
+        if (hw->phy_id == IGP03E1000_E_PHY_ID) match = TRUE;
+        if (hw->phy_id == IFE_E_PHY_ID) match = TRUE;
+        if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = TRUE;
+        if (hw->phy_id == IFE_C_E_PHY_ID) match = TRUE;
+        break;
    default:
        DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
        return -E1000_ERR_CONFIG;
@@ -3784,6 +4081,53 @@ e1000_phy_igp_get_info(struct e1000_hw *hw,
 }
 /******************************************************************************
+* Get PHY information from various PHY registers for ife PHY only.
+*
+* hw - Struct containing variables accessed by shared code
+* phy_info - PHY information structure
+******************************************************************************/
+int32_t
+e1000_phy_ife_get_info(struct e1000_hw *hw,
+                       struct e1000_phy_info *phy_info)
+{
+    int32_t ret_val;
+    uint16_t phy_data, polarity;
+    DEBUGFUNC("e1000_phy_ife_get_info");
+    phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
+    phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
+    ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
+    if (ret_val)
+        return ret_val;
+    phy_info->polarity_correction =
+                        (phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >>
+                        IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT;
+    if (phy_info->polarity_correction == e1000_polarity_reversal_enabled) {
+        ret_val = e1000_check_polarity(hw, &polarity);
+        if (ret_val)
+            return ret_val;
+    } else {
+        /* Polarity is forced. */
+        polarity = (phy_data & IFE_PSC_FORCE_POLARITY) >>
+                       IFE_PSC_FORCE_POLARITY_SHIFT;
+    }
+    phy_info->cable_polarity = polarity;
+    ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
+    if (ret_val)
+        return ret_val;
+    phy_info->mdix_mode =
+                     (phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >>
+                     IFE_PMC_MDIX_MODE_SHIFT;
+    return E1000_SUCCESS;
+}
+/******************************************************************************
 * Get PHY information from various PHY registers fot m88 PHY only.
 *
 * hw - Struct containing variables accessed by shared code
@@ -3898,9 +4242,12 @@ e1000_phy_get_info(struct e1000_hw *hw,
        return -E1000_ERR_CONFIG;
    }
-    if(hw->phy_type == e1000_phy_igp ||
+    if (hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
        hw->phy_type == e1000_phy_igp_2)
        return e1000_phy_igp_get_info(hw, phy_info);
+    else if (hw->phy_type == e1000_phy_ife)
+        return e1000_phy_ife_get_info(hw, phy_info);
    else
        return e1000_phy_m88_get_info(hw, phy_info);
 }
@@ -4049,6 +4396,35 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
        eeprom->use_eerd = TRUE;
        eeprom->use_eewr = FALSE;
        break;
+    case e1000_ich8lan:
+    {
+        int32_t  i = 0;
+        uint32_t flash_size = E1000_READ_ICH8_REG(hw, ICH8_FLASH_GFPREG);
+        eeprom->type = e1000_eeprom_ich8;
+        eeprom->use_eerd = FALSE;
+        eeprom->use_eewr = FALSE;
+        eeprom->word_size = E1000_SHADOW_RAM_WORDS;
+        /* Zero the shadow RAM structure. But don't load it from NVM
+         * so as to save time for driver init */
+        if (hw->eeprom_shadow_ram != NULL) {
+            for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
+                hw->eeprom_shadow_ram[i].modified = FALSE;
+                hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
+            }
+        }
+        hw->flash_base_addr = (flash_size & ICH8_GFPREG_BASE_MASK) *
+                              ICH8_FLASH_SECTOR_SIZE;
+        hw->flash_bank_size = ((flash_size >> 16) & ICH8_GFPREG_BASE_MASK) + 1;
+        hw->flash_bank_size -= (flash_size & ICH8_GFPREG_BASE_MASK);
+        hw->flash_bank_size *= ICH8_FLASH_SECTOR_SIZE;
+        hw->flash_bank_size /= 2 * sizeof(uint16_t);
+        break;
+    }
    default:
        break;
    }
@@ -4469,7 +4845,10 @@ e1000_read_eeprom(struct e1000_hw *hw,
        return ret_val;
    }
-    if(eeprom->type == e1000_eeprom_spi) {
+    if (eeprom->type == e1000_eeprom_ich8)
+        return e1000_read_eeprom_ich8(hw, offset, words, data);
+    if (eeprom->type == e1000_eeprom_spi) {
        uint16_t word_in;
        uint8_t read_opcode = EEPROM_READ_OPCODE_SPI;
@@ -4636,7 +5015,10 @@ e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
    DEBUGFUNC("e1000_is_onboard_nvm_eeprom");
-    if(hw->mac_type == e1000_82573) {
+    if (hw->mac_type == e1000_ich8lan)
+        return FALSE;
+    if (hw->mac_type == e1000_82573) {
        eecd = E1000_READ_REG(hw, EECD);
        /* Isolate bits 15 & 16 */
@@ -4686,8 +5068,22 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw)
        }
    }
-    for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+    if (hw->mac_type == e1000_ich8lan) {
-        if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+        /* Drivers must allocate the shadow ram structure for the
+         * EEPROM checksum to be updated.  Otherwise, this bit as well
+         * as the checksum must both be set correctly for this
+         * validation to pass.
+         */
+        e1000_read_eeprom(hw, 0x19, 1, &eeprom_data);
+        if ((eeprom_data & 0x40) == 0) {
+            eeprom_data |= 0x40;
+            e1000_write_eeprom(hw, 0x19, 1, &eeprom_data);
+            e1000_update_eeprom_checksum(hw);
+        }
+    }
+    for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+        if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
            DEBUGOUT("EEPROM Read Error\n");
            return -E1000_ERR_EEPROM;
        }
@@ -4713,6 +5109,7 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw)
 int32_t
 e1000_update_eeprom_checksum(struct e1000_hw *hw)
 {
+    uint32_t ctrl_ext;
    uint16_t checksum = 0;
    uint16_t i, eeprom_data;
@@ -4731,6 +5128,14 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw)
        return -E1000_ERR_EEPROM;
    } else if (hw->eeprom.type == e1000_eeprom_flash) {
        e1000_commit_shadow_ram(hw);
+    } else if (hw->eeprom.type == e1000_eeprom_ich8) {
+        e1000_commit_shadow_ram(hw);
+        /* Reload the EEPROM, or else modifications will not appear
+         * until after next adapter reset. */
+        ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+        ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+        E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+        msec_delay(10);
    }
    return E1000_SUCCESS;
 }
@@ -4770,6 +5175,9 @@ e1000_write_eeprom(struct e1000_hw *hw,
    if(eeprom->use_eewr == TRUE)
        return e1000_write_eeprom_eewr(hw, offset, words, data);
+    if (eeprom->type == e1000_eeprom_ich8)
+        return e1000_write_eeprom_ich8(hw, offset, words, data);
    /* Prepare the EEPROM for writing  */
    if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
        return -E1000_ERR_EEPROM;
@@ -4957,11 +5365,17 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
    uint32_t flop = 0;
    uint32_t i = 0;
    int32_t error = E1000_SUCCESS;
+    uint32_t old_bank_offset = 0;
-    /* The flop register will be used to determine if flash type is STM */
+    uint32_t new_bank_offset = 0;
-    flop = E1000_READ_REG(hw, FLOP);
+    uint32_t sector_retries = 0;
+    uint8_t low_byte = 0;
+    uint8_t high_byte = 0;
+    uint8_t temp_byte = 0;
+    boolean_t sector_write_failed = FALSE;
    if (hw->mac_type == e1000_82573) {
+        /* The flop register will be used to determine if flash type is STM */
+        flop = E1000_READ_REG(hw, FLOP);
        for (i=0; i < attempts; i++) {
            eecd = E1000_READ_REG(hw, EECD);
            if ((eecd & E1000_EECD_FLUPD) == 0) {
@@ -4995,6 +5409,106 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
        }
    }
+    if (hw->mac_type == e1000_ich8lan && hw->eeprom_shadow_ram != NULL) {
+        /* We're writing to the opposite bank so if we're on bank 1,
+         * write to bank 0 etc.  We also need to erase the segment that
+         * is going to be written */
+        if (!(E1000_READ_REG(hw, EECD) & E1000_EECD_SEC1VAL)) {
+            new_bank_offset = hw->flash_bank_size * 2;
+            old_bank_offset = 0;
+            e1000_erase_ich8_4k_segment(hw, 1);
+        } else {
+            old_bank_offset = hw->flash_bank_size * 2;
+            new_bank_offset = 0;
+            e1000_erase_ich8_4k_segment(hw, 0);
+        }
+        do {
+            sector_write_failed = FALSE;
+            /* Loop for every byte in the shadow RAM,
+             * which is in units of words. */
+            for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
+                /* Determine whether to write the value stored
+                 * in the other NVM bank or a modified value stored
+                 * in the shadow RAM */
+                if (hw->eeprom_shadow_ram[i].modified == TRUE) {
+                    low_byte = (uint8_t)hw->eeprom_shadow_ram[i].eeprom_word;
+                    e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset,
+                                         &temp_byte);
+                    udelay(100);
+                    error = e1000_verify_write_ich8_byte(hw,
+                                                 (i << 1) + new_bank_offset,
+                                                 low_byte);
+                    if (error != E1000_SUCCESS)
+                        sector_write_failed = TRUE;
+                    high_byte =
+                        (uint8_t)(hw->eeprom_shadow_ram[i].eeprom_word >> 8);
+                    e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1,
+                                         &temp_byte);
+                    udelay(100);
+                } else {
+                    e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset,
+                                         &low_byte);
+                    udelay(100);
+                    error = e1000_verify_write_ich8_byte(hw,
+                                 (i << 1) + new_bank_offset, low_byte);
+                    if (error != E1000_SUCCESS)
+                        sector_write_failed = TRUE;
+                    e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1,
+                                         &high_byte);
+                }
+                /* If the word is 0x13, then make sure the signature bits
+                 * (15:14) are 11b until the commit has completed.
+                 * This will allow us to write 10b which indicates the
+                 * signature is valid.  We want to do this after the write
+                 * has completed so that we don't mark the segment valid
+                 * while the write is still in progress */
+                if (i == E1000_ICH8_NVM_SIG_WORD)
+                    high_byte = E1000_ICH8_NVM_SIG_MASK | high_byte;
+                error = e1000_verify_write_ich8_byte(hw,
+                             (i << 1) + new_bank_offset + 1, high_byte);
+                if (error != E1000_SUCCESS)
+                    sector_write_failed = TRUE;
+                if (sector_write_failed == FALSE) {
+                    /* Clear the now not used entry in the cache */
+                    hw->eeprom_shadow_ram[i].modified = FALSE;
+                    hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
+                }
+            }
+            /* Don't bother writing the segment valid bits if sector
+             * programming failed. */
+            if (sector_write_failed == FALSE) {
+                /* Finally validate the new segment by setting bit 15:14
+                 * to 10b in word 0x13 , this can be done without an
+                 * erase as well since these bits are 11 to start with
+                 * and we need to change bit 14 to 0b */
+                e1000_read_ich8_byte(hw,
+                    E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset,
+                    &high_byte);
+                high_byte &= 0xBF;
+                error = e1000_verify_write_ich8_byte(hw,
+                            E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset,
+                            high_byte);
+                if (error != E1000_SUCCESS)
+                    sector_write_failed = TRUE;
+                /* And invalidate the previously valid segment by setting
+                 * its signature word (0x13) high_byte to 0b. This can be
+                 * done without an erase because flash erase sets all bits
+                 * to 1's. We can write 1's to 0's without an erase */
+                error = e1000_verify_write_ich8_byte(hw,
+                            E1000_ICH8_NVM_SIG_WORD * 2 + 1 + old_bank_offset,
+                            0);
+                if (error != E1000_SUCCESS)
+                    sector_write_failed = TRUE;
+            }
+        } while (++sector_retries < 10 && sector_write_failed == TRUE);
+    }
    return error;
 }
@@ -5102,15 +5616,19 @@ e1000_init_rx_addrs(struct e1000_hw *hw)
     * the other port. */
    if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE))
        rar_num -= 1;
+    if (hw->mac_type == e1000_ich8lan)
+        rar_num = E1000_RAR_ENTRIES_ICH8LAN;
    /* Zero out the other 15 receive addresses. */
    DEBUGOUT("Clearing RAR[1-15]\n");
    for(i = 1; i < rar_num; i++) {
        E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+        E1000_WRITE_FLUSH(hw);
        E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+        E1000_WRITE_FLUSH(hw);
    }
 }
-#if 0
 /******************************************************************************
 * Updates the MAC's list of multicast addresses.
 *
@@ -5145,6 +5663,8 @@ e1000_mc_addr_list_update(struct e1000_hw *hw,
    /* Clear RAR[1-15] */
    DEBUGOUT(" Clearing RAR[1-15]\n");
    num_rar_entry = E1000_RAR_ENTRIES;
+    if (hw->mac_type == e1000_ich8lan)
+        num_rar_entry = E1000_RAR_ENTRIES_ICH8LAN;
    /* Reserve a spot for the Locally Administered Address to work around
     * an 82571 issue in which a reset on one port will reload the MAC on
     * the other port. */
@@ -5153,14 +5673,19 @@ e1000_mc_addr_list_update(struct e1000_hw *hw,
    for(i = rar_used_count; i < num_rar_entry; i++) {
        E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+        E1000_WRITE_FLUSH(hw);
        E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+        E1000_WRITE_FLUSH(hw);
    }
    /* Clear the MTA */
    DEBUGOUT(" Clearing MTA\n");
    num_mta_entry = E1000_NUM_MTA_REGISTERS;
+    if (hw->mac_type == e1000_ich8lan)
+        num_mta_entry = E1000_NUM_MTA_REGISTERS_ICH8LAN;
    for(i = 0; i < num_mta_entry; i++) {
        E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+        E1000_WRITE_FLUSH(hw);
    }
    /* Add the new addresses */
@@ -5194,7 +5719,6 @@ e1000_mc_addr_list_update(struct e1000_hw *hw,
    }
    DEBUGOUT("MC Update Complete\n");
 }
-#endif  /*  0  */
 /******************************************************************************
 * Hashes an address to determine its location in the multicast table
@@ -5217,24 +5741,46 @@ e1000_hash_mc_addr(struct e1000_hw *hw,
     * LSB                 MSB
     */
    case 0:
-        /* [47:36] i.e. 0x563 for above example address */
+        if (hw->mac_type == e1000_ich8lan) {
-        hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+            /* [47:38] i.e. 0x158 for above example address */
+            hash_value = ((mc_addr[4] >> 6) | (((uint16_t) mc_addr[5]) << 2));
+        } else {
+            /* [47:36] i.e. 0x563 for above example address */
+            hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+        }
        break;
    case 1:
-        /* [46:35] i.e. 0xAC6 for above example address */
+        if (hw->mac_type == e1000_ich8lan) {
-        hash_value = ((mc_addr[4] >> 3) | (((uint16_t) mc_addr[5]) << 5));
+            /* [46:37] i.e. 0x2B1 for above example address */
+            hash_value = ((mc_addr[4] >> 5) | (((uint16_t) mc_addr[5]) << 3));
+        } else {
+            /* [46:35] i.e. 0xAC6 for above example address */
+            hash_value = ((mc_addr[4] >> 3) | (((uint16_t) mc_addr[5]) << 5));
+        }
        break;
    case 2:
-        /* [45:34] i.e. 0x5D8 for above example address */
+        if (hw->mac_type == e1000_ich8lan) {
-        hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+            /*[45:36] i.e. 0x163 for above example address */
+            hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+        } else {
+            /* [45:34] i.e. 0x5D8 for above example address */
+            hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+        }
        break;
    case 3:
-        /* [43:32] i.e. 0x634 for above example address */
+        if (hw->mac_type == e1000_ich8lan) {
-        hash_value = ((mc_addr[4]) | (((uint16_t) mc_addr[5]) << 8));
+            /* [43:34] i.e. 0x18D for above example address */
+            hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+        } else {
+            /* [43:32] i.e. 0x634 for above example address */
+            hash_value = ((mc_addr[4]) | (((uint16_t) mc_addr[5]) << 8));
+        }
        break;
    }
    hash_value &= 0xFFF;
+    if (hw->mac_type == e1000_ich8lan)
+        hash_value &= 0x3FF;
    return hash_value;
 }
@@ -5262,6 +5808,8 @@ e1000_mta_set(struct e1000_hw *hw,
     * register are determined by the lower 5 bits of the value.
     */
    hash_reg = (hash_value >> 5) & 0x7F;
+    if (hw->mac_type == e1000_ich8lan)
+        hash_reg &= 0x1F;
    hash_bit = hash_value & 0x1F;
    mta = E1000_READ_REG_ARRAY(hw, MTA, hash_reg);
@@ -5275,9 +5823,12 @@ e1000_mta_set(struct e1000_hw *hw,
    if((hw->mac_type == e1000_82544) && ((hash_reg & 0x1) == 1)) {
        temp = E1000_READ_REG_ARRAY(hw, MTA, (hash_reg - 1));
        E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
+        E1000_WRITE_FLUSH(hw);
        E1000_WRITE_REG_ARRAY(hw, MTA, (hash_reg - 1), temp);
+        E1000_WRITE_FLUSH(hw);
    } else {
        E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
+        E1000_WRITE_FLUSH(hw);
    }
 }
@@ -5334,7 +5885,9 @@ e1000_rar_set(struct e1000_hw *hw,
    }
    E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
+    E1000_WRITE_FLUSH(hw);
    E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
+    E1000_WRITE_FLUSH(hw);
 }
 /******************************************************************************
@@ -5351,12 +5904,18 @@ e1000_write_vfta(struct e1000_hw *hw,
 {
    uint32_t temp;
-    if((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
+    if (hw->mac_type == e1000_ich8lan)
+        return;
+    if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
        temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
        E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+        E1000_WRITE_FLUSH(hw);
        E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
+        E1000_WRITE_FLUSH(hw);
    } else {
        E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+        E1000_WRITE_FLUSH(hw);
    }
 }
@@ -5373,6 +5932,9 @@ e1000_clear_vfta(struct e1000_hw *hw)
    uint32_t vfta_offset = 0;
    uint32_t vfta_bit_in_reg = 0;
+    if (hw->mac_type == e1000_ich8lan)
+        return;
    if (hw->mac_type == e1000_82573) {
        if (hw->mng_cookie.vlan_id != 0) {
            /* The VFTA is a 4096b bit-field, each identifying a single VLAN
@@ -5392,6 +5954,7 @@ e1000_clear_vfta(struct e1000_hw *hw)
         * manageability unit */
        vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
        E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
+        E1000_WRITE_FLUSH(hw);
    }
 }
@@ -5421,9 +5984,18 @@ e1000_id_led_init(struct e1000_hw * hw)
        DEBUGOUT("EEPROM Read Error\n");
        return -E1000_ERR_EEPROM;
    }
-    if((eeprom_data== ID_LED_RESERVED_0000) ||
-       (eeprom_data == ID_LED_RESERVED_FFFF)) eeprom_data = ID_LED_DEFAULT;
+    if ((hw->mac_type == e1000_82573) &&
-    for(i = 0; i < 4; i++) {
+        (eeprom_data == ID_LED_RESERVED_82573))
+        eeprom_data = ID_LED_DEFAULT_82573;
+    else if ((eeprom_data == ID_LED_RESERVED_0000) ||
+            (eeprom_data == ID_LED_RESERVED_FFFF)) {
+        if (hw->mac_type == e1000_ich8lan)
+            eeprom_data = ID_LED_DEFAULT_ICH8LAN;
+        else
+            eeprom_data = ID_LED_DEFAULT;
+    }
+    for (i = 0; i < 4; i++) {
        temp = (eeprom_data >> (i << 2)) & led_mask;
        switch(temp) {
        case ID_LED_ON1_DEF2:
@@ -5519,6 +6091,44 @@ e1000_setup_led(struct e1000_hw *hw)
 }
 /******************************************************************************
+ * Used on 82571 and later Si that has LED blink bits.
+ * Callers must use their own timer and should have already called
+ * e1000_id_led_init()
+ * Call e1000_cleanup led() to stop blinking
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+int32_t
+e1000_blink_led_start(struct e1000_hw *hw)
+{
+    int16_t  i;
+    uint32_t ledctl_blink = 0;
+    DEBUGFUNC("e1000_id_led_blink_on");
+    if (hw->mac_type < e1000_82571) {
+        /* Nothing to do */
+        return E1000_SUCCESS;
+    }
+    if (hw->media_type == e1000_media_type_fiber) {
+        /* always blink LED0 for PCI-E fiber */
+        ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+                     (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+    } else {
+        /* set the blink bit for each LED that's "on" (0x0E) in ledctl_mode2 */
+        ledctl_blink = hw->ledctl_mode2;
+        for (i=0; i < 4; i++)
+            if (((hw->ledctl_mode2 >> (i * 8)) & 0xFF) ==
+                E1000_LEDCTL_MODE_LED_ON)
+                ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8));
+    }
+    E1000_WRITE_REG(hw, LEDCTL, ledctl_blink);
+    return E1000_SUCCESS;
+}
+/******************************************************************************
 * Restores the saved state of the SW controlable LED.
 *
 * hw - Struct containing variables accessed by shared code
@@ -5548,6 +6158,10 @@ e1000_cleanup_led(struct e1000_hw *hw)
            return ret_val;
        /* Fall Through */
    default:
+        if (hw->phy_type == e1000_phy_ife) {
+            e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
+            break;
+        }
        /* Restore LEDCTL settings */
        E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_default);
        break;
@@ -5592,7 +6206,10 @@ e1000_led_on(struct e1000_hw *hw)
            /* Clear SW Defineable Pin 0 to turn on the LED */
            ctrl &= ~E1000_CTRL_SWDPIN0;
            ctrl |= E1000_CTRL_SWDPIO0;
-        } else if(hw->media_type == e1000_media_type_copper) {
+        } else if (hw->phy_type == e1000_phy_ife) {
+            e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+                 (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));
+        } else if (hw->media_type == e1000_media_type_copper) {
            E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode2);
            return E1000_SUCCESS;
        }
@@ -5640,7 +6257,10 @@ e1000_led_off(struct e1000_hw *hw)
            /* Set SW Defineable Pin 0 to turn off the LED */
            ctrl |= E1000_CTRL_SWDPIN0;
            ctrl |= E1000_CTRL_SWDPIO0;
-        } else if(hw->media_type == e1000_media_type_copper) {
+        } else if (hw->phy_type == e1000_phy_ife) {
+            e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+                 (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF));
+        } else if (hw->media_type == e1000_media_type_copper) {
            E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode1);
            return E1000_SUCCESS;
        }
@@ -5678,12 +6298,16 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw)
    temp = E1000_READ_REG(hw, XOFFRXC);
    temp = E1000_READ_REG(hw, XOFFTXC);
    temp = E1000_READ_REG(hw, FCRUC);
+    if (hw->mac_type != e1000_ich8lan) {
    temp = E1000_READ_REG(hw, PRC64);
    temp = E1000_READ_REG(hw, PRC127);
    temp = E1000_READ_REG(hw, PRC255);
    temp = E1000_READ_REG(hw, PRC511);
    temp = E1000_READ_REG(hw, PRC1023);
    temp = E1000_READ_REG(hw, PRC1522);
+    }
    temp = E1000_READ_REG(hw, GPRC);
    temp = E1000_READ_REG(hw, BPRC);
    temp = E1000_READ_REG(hw, MPRC);
@@ -5703,12 +6327,16 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw)
    temp = E1000_READ_REG(hw, TOTH);
    temp = E1000_READ_REG(hw, TPR);
    temp = E1000_READ_REG(hw, TPT);
+    if (hw->mac_type != e1000_ich8lan) {
    temp = E1000_READ_REG(hw, PTC64);
    temp = E1000_READ_REG(hw, PTC127);
    temp = E1000_READ_REG(hw, PTC255);
    temp = E1000_READ_REG(hw, PTC511);
    temp = E1000_READ_REG(hw, PTC1023);
    temp = E1000_READ_REG(hw, PTC1522);
+    }
    temp = E1000_READ_REG(hw, MPTC);
    temp = E1000_READ_REG(hw, BPTC);
@@ -5731,6 +6359,9 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw)
    temp = E1000_READ_REG(hw, IAC);
    temp = E1000_READ_REG(hw, ICRXOC);
+    if (hw->mac_type == e1000_ich8lan) return;
    temp = E1000_READ_REG(hw, ICRXPTC);
    temp = E1000_READ_REG(hw, ICRXATC);
    temp = E1000_READ_REG(hw, ICTXPTC);
@@ -5911,6 +6542,7 @@ e1000_get_bus_info(struct e1000_hw *hw)
        hw->bus_width = e1000_bus_width_pciex_1;
        break;
    case e1000_82571:
+    case e1000_ich8lan:
    case e1000_80003es2lan:
        hw->bus_type = e1000_bus_type_pci_express;
        hw->bus_speed = e1000_bus_speed_2500;
@@ -5948,8 +6580,6 @@ e1000_get_bus_info(struct e1000_hw *hw)
        break;
    }
 }
-#if 0
 /******************************************************************************
 * Reads a value from one of the devices registers using port I/O (as opposed
 * memory mapped I/O). Only 82544 and newer devices support port I/O.
@@ -5967,7 +6597,6 @@ e1000_read_reg_io(struct e1000_hw *hw,
    e1000_io_write(hw, io_addr, offset);
    return e1000_io_read(hw, io_data);
 }
-#endif  /*  0  */
 /******************************************************************************
 * Writes a value to one of the devices registers using port I/O (as opposed to
@@ -6012,8 +6641,6 @@ e1000_get_cable_length(struct e1000_hw *hw,
 {
    int32_t ret_val;
    uint16_t agc_value = 0;
-    uint16_t cur_agc, min_agc = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
-    uint16_t max_agc = 0;
    uint16_t i, phy_data;
    uint16_t cable_length;
@@ -6086,6 +6713,8 @@ e1000_get_cable_length(struct e1000_hw *hw,
            break;
        }
    } else if(hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
+        uint16_t cur_agc_value;
+        uint16_t min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
        uint16_t agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
                                                         {IGP01E1000_PHY_AGC_A,
                                                          IGP01E1000_PHY_AGC_B,
@@ -6098,23 +6727,23 @@ e1000_get_cable_length(struct e1000_hw *hw,
            if(ret_val)
                return ret_val;
-            cur_agc = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
+            cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
-            /* Array bound check. */
+            /* Value bound check. */
-            if((cur_agc >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) ||
+            if ((cur_agc_value >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) ||
-               (cur_agc == 0))
+                (cur_agc_value == 0))
                return -E1000_ERR_PHY;
-            agc_value += cur_agc;
+            agc_value += cur_agc_value;
            /* Update minimal AGC value. */
-            if(min_agc > cur_agc)
+            if (min_agc_value > cur_agc_value)
-                min_agc = cur_agc;
+                min_agc_value = cur_agc_value;
        }
        /* Remove the minimal AGC result for length < 50m */
-        if(agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
+        if (agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
-            agc_value -= min_agc;
+            agc_value -= min_agc_value;
            /* Get the average length of the remaining 3 channels */
            agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1);
@@ -6130,7 +6759,10 @@ e1000_get_cable_length(struct e1000_hw *hw,
                       IGP01E1000_AGC_RANGE) : 0;
        *max_length = e1000_igp_cable_length_table[agc_value] +
                      IGP01E1000_AGC_RANGE;
-    } else if (hw->phy_type == e1000_phy_igp_2) {
+    } else if (hw->phy_type == e1000_phy_igp_2 ||
+               hw->phy_type == e1000_phy_igp_3) {
+        uint16_t cur_agc_index, max_agc_index = 0;
+        uint16_t min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1;
        uint16_t agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
                                                         {IGP02E1000_PHY_AGC_A,
                                                          IGP02E1000_PHY_AGC_B,
@@ -6145,19 +6777,27 @@ e1000_get_cable_length(struct e1000_hw *hw,
            /* Getting bits 15:9, which represent the combination of course and
             * fine gain values.  The result is a number that can be put into
             * the lookup table to obtain the approximate cable length. */
-            cur_agc = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+            cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
-                      IGP02E1000_AGC_LENGTH_MASK;
+                            IGP02E1000_AGC_LENGTH_MASK;
-            /* Remove min & max AGC values from calculation. */
+            /* Array index bound check. */
-            if (e1000_igp_2_cable_length_table[min_agc] > e1000_igp_2_cable_length_table[cur_agc])
+            if ((cur_agc_index >= IGP02E1000_AGC_LENGTH_TABLE_SIZE) ||
-                min_agc = cur_agc;
+                (cur_agc_index == 0))
-            if (e1000_igp_2_cable_length_table[max_agc] < e1000_igp_2_cable_length_table[cur_agc])
+                return -E1000_ERR_PHY;
-                max_agc = cur_agc;
-            agc_value += e1000_igp_2_cable_length_table[cur_agc];
+            /* Remove min & max AGC values from calculation. */
+            if (e1000_igp_2_cable_length_table[min_agc_index] >
+                e1000_igp_2_cable_length_table[cur_agc_index])
+                min_agc_index = cur_agc_index;
+            if (e1000_igp_2_cable_length_table[max_agc_index] <
+                e1000_igp_2_cable_length_table[cur_agc_index])
+                max_agc_index = cur_agc_index;
+            agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
        }
-        agc_value -= (e1000_igp_2_cable_length_table[min_agc] + e1000_igp_2_cable_length_table[max_agc]);
+        agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
+                      e1000_igp_2_cable_length_table[max_agc_index]);
        agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
        /* Calculate cable length with the error range of +/- 10 meters. */
@@ -6203,7 +6843,8 @@ e1000_check_polarity(struct e1000_hw *hw,
            return ret_val;
        *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) >>
                    M88E1000_PSSR_REV_POLARITY_SHIFT;
-    } else if(hw->phy_type == e1000_phy_igp ||
+    } else if (hw->phy_type == e1000_phy_igp ||
+              hw->phy_type == e1000_phy_igp_3 ||
              hw->phy_type == e1000_phy_igp_2) {
        /* Read the Status register to check the speed */
        ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
@@ -6229,6 +6870,13 @@ e1000_check_polarity(struct e1000_hw *hw,
             * 100 Mbps this bit is always 0) */
            *polarity = phy_data & IGP01E1000_PSSR_POLARITY_REVERSED;
        }
+    } else if (hw->phy_type == e1000_phy_ife) {
+        ret_val = e1000_read_phy_reg(hw, IFE_PHY_EXTENDED_STATUS_CONTROL,
+                                     &phy_data);
+        if (ret_val)
+            return ret_val;
+        *polarity = (phy_data & IFE_PESC_POLARITY_REVERSED) >>
+                           IFE_PESC_POLARITY_REVERSED_SHIFT;
    }
    return E1000_SUCCESS;
 }
@@ -6256,7 +6904,8 @@ e1000_check_downshift(struct e1000_hw *hw)
    DEBUGFUNC("e1000_check_downshift");
-    if(hw->phy_type == e1000_phy_igp ||
+    if (hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
        hw->phy_type == e1000_phy_igp_2) {
        ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
                                     &phy_data);
@@ -6273,6 +6922,9 @@ e1000_check_downshift(struct e1000_hw *hw)
        hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
                               M88E1000_PSSR_DOWNSHIFT_SHIFT;
+    } else if (hw->phy_type == e1000_phy_ife) {
+        /* e1000_phy_ife supports 10/100 speed only */
+        hw->speed_downgraded = FALSE;
    }
    return E1000_SUCCESS;
@@ -6317,7 +6969,9 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw,
        if(speed == SPEED_1000) {
-            e1000_get_cable_length(hw, &min_length, &max_length);
+            ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
+            if (ret_val)
+                return ret_val;
            if((hw->dsp_config_state == e1000_dsp_config_enabled) &&
                min_length >= e1000_igp_cable_length_50) {
@@ -6525,20 +7179,27 @@ static int32_t
 e1000_set_d3_lplu_state(struct e1000_hw *hw,
                        boolean_t active)
 {
+    uint32_t phy_ctrl = 0;
    int32_t ret_val;
    uint16_t phy_data;
    DEBUGFUNC("e1000_set_d3_lplu_state");
-    if(hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2)
+    if (hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2
+        && hw->phy_type != e1000_phy_igp_3)
        return E1000_SUCCESS;
    /* During driver activity LPLU should not be used or it will attain link
     * from the lowest speeds starting from 10Mbps. The capability is used for
     * Dx transitions and states */
-    if(hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) {
+    if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) {
        ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
-        if(ret_val)
+        if (ret_val)
            return ret_val;
+    } else if (hw->mac_type == e1000_ich8lan) {
+        /* MAC writes into PHY register based on the state transition
+         * and start auto-negotiation. SW driver can overwrite the settings
+         * in CSR PHY power control E1000_PHY_CTRL register. */
+        phy_ctrl = E1000_READ_REG(hw, PHY_CTRL);
    } else {
        ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
        if(ret_val)
@@ -6553,11 +7214,16 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw,
            if(ret_val)
                return ret_val;
        } else {
+            if (hw->mac_type == e1000_ich8lan) {
+                phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+                E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+            } else {
                phy_data &= ~IGP02E1000_PM_D3_LPLU;
                ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
                                              phy_data);
                if (ret_val)
                    return ret_val;
+            }
        }
        /* LPLU and SmartSpeed are mutually exclusive.  LPLU is used during
@@ -6593,17 +7259,22 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw,
              (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) {
        if(hw->mac_type == e1000_82541_rev_2 ||
-           hw->mac_type == e1000_82547_rev_2) {
+            hw->mac_type == e1000_82547_rev_2) {
            phy_data |= IGP01E1000_GMII_FLEX_SPD;
            ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
            if(ret_val)
                return ret_val;
        } else {
+            if (hw->mac_type == e1000_ich8lan) {
+                phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
+                E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+            } else {
                phy_data |= IGP02E1000_PM_D3_LPLU;
                ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
                                              phy_data);
                if (ret_val)
                    return ret_val;
+            }
        }
        /* When LPLU is enabled we should disable SmartSpeed */
@@ -6638,6 +7309,7 @@ static int32_t
 e1000_set_d0_lplu_state(struct e1000_hw *hw,
                        boolean_t active)
 {
+    uint32_t phy_ctrl = 0;
    int32_t ret_val;
    uint16_t phy_data;
    DEBUGFUNC("e1000_set_d0_lplu_state");
@@ -6645,15 +7317,24 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw,
    if(hw->mac_type <= e1000_82547_rev_2)
        return E1000_SUCCESS;
+    if (hw->mac_type == e1000_ich8lan) {
+        phy_ctrl = E1000_READ_REG(hw, PHY_CTRL);
+    } else {
        ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
        if(ret_val)
            return ret_val;
+    }
    if (!active) {
+        if (hw->mac_type == e1000_ich8lan) {
+            phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
+            E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+        } else {
            phy_data &= ~IGP02E1000_PM_D0_LPLU;
            ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
            if (ret_val)
                return ret_val;
+        }
        /* LPLU and SmartSpeed are mutually exclusive.  LPLU is used during
         * Dx states where the power conservation is most important.  During
@@ -6686,10 +7367,15 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw,
    } else {
+        if (hw->mac_type == e1000_ich8lan) {
+            phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
+            E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+        } else {
            phy_data |= IGP02E1000_PM_D0_LPLU;
            ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
            if (ret_val)
                return ret_val;
+        }
        /* When LPLU is enabled we should disable SmartSpeed */
        ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
@@ -6928,8 +7614,10 @@ e1000_mng_write_cmd_header(struct e1000_hw * hw,
    length >>= 2;
    /* The device driver writes the relevant command block into the ram area. */
-    for (i = 0; i < length; i++)
+    for (i = 0; i < length; i++) {
        E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((uint32_t *) hdr + i));
+        E1000_WRITE_FLUSH(hw);
+    }
    return E1000_SUCCESS;
 }
@@ -6961,15 +7649,18 @@ e1000_mng_write_commit(
 * returns  - TRUE when the mode is IAMT or FALSE.
 ****************************************************************************/
 boolean_t
-e1000_check_mng_mode(
+e1000_check_mng_mode(struct e1000_hw *hw)
-    struct e1000_hw *hw)
 {
    uint32_t fwsm;
    fwsm = E1000_READ_REG(hw, FWSM);
-    if((fwsm & E1000_FWSM_MODE_MASK) ==
+    if (hw->mac_type == e1000_ich8lan) {
-        (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
+        if ((fwsm & E1000_FWSM_MODE_MASK) ==
+            (E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
+            return TRUE;
+    } else if ((fwsm & E1000_FWSM_MODE_MASK) ==
+               (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
        return TRUE;
    return FALSE;
@@ -7209,7 +7900,6 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw)
    E1000_WRITE_REG(hw, CTRL, ctrl);
 }
-#if 0
 /***************************************************************************
 *
 * Enables PCI-Express master access.
@@ -7233,7 +7923,6 @@ e1000_enable_pciex_master(struct e1000_hw *hw)
    ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE;
    E1000_WRITE_REG(hw, CTRL, ctrl);
 }
-#endif  /*  0  */
 /*******************************************************************************
 *
@@ -7299,8 +7988,10 @@ e1000_get_auto_rd_done(struct e1000_hw *hw)
    case e1000_82572:
    case e1000_82573:
    case e1000_80003es2lan:
-        while(timeout) {
+    case e1000_ich8lan:
-            if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break;
+        while (timeout) {
+            if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD)
+                break;
            else msec_delay(1);
            timeout--;
        }
@@ -7340,7 +8031,7 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw)
    switch (hw->mac_type) {
    default:
-        msec_delay(10);
+        msec_delay_irq(10);
        break;
    case e1000_80003es2lan:
        /* Separate *_CFG_DONE_* bit for each port */
@@ -7523,6 +8214,13 @@ int32_t
 e1000_check_phy_reset_block(struct e1000_hw *hw)
 {
    uint32_t manc = 0;
+    uint32_t fwsm = 0;
+    if (hw->mac_type == e1000_ich8lan) {
+        fwsm = E1000_READ_REG(hw, FWSM);
+        return (fwsm & E1000_FWSM_RSPCIPHY) ? E1000_SUCCESS
+                                            : E1000_BLK_PHY_RESET;
+    }
    if (hw->mac_type > e1000_82547_rev_2)
        manc = E1000_READ_REG(hw, MANC);
@@ -7549,6 +8247,8 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw)
        if((fwsm & E1000_FWSM_MODE_MASK) != 0)
            return TRUE;
        break;
+    case e1000_ich8lan:
+        return TRUE;
    default:
        break;
    }
@@ -7556,4 +8256,846 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw)
 }
+/******************************************************************************
+ * Configure PCI-Ex no-snoop
+ *
+ * hw - Struct containing variables accessed by shared code.
+ * no_snoop - Bitmap of no-snoop events.
+ *
+ * returns: E1000_SUCCESS
+ *
+ *****************************************************************************/
+int32_t
+e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop)
+{
+    uint32_t gcr_reg = 0;
+    DEBUGFUNC("e1000_set_pci_ex_no_snoop");
+    if (hw->bus_type == e1000_bus_type_unknown)
+        e1000_get_bus_info(hw);
+    if (hw->bus_type != e1000_bus_type_pci_express)
+        return E1000_SUCCESS;
+    if (no_snoop) {
+        gcr_reg = E1000_READ_REG(hw, GCR);
+        gcr_reg &= ~(PCI_EX_NO_SNOOP_ALL);
+        gcr_reg |= no_snoop;
+        E1000_WRITE_REG(hw, GCR, gcr_reg);
+    }
+    if (hw->mac_type == e1000_ich8lan) {
+        uint32_t ctrl_ext;
+        E1000_WRITE_REG(hw, GCR, PCI_EX_82566_SNOOP_ALL);
+        ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+        ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+        E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+    }
+    return E1000_SUCCESS;
+}
+/***************************************************************************
+ *
+ * Get software semaphore FLAG bit (SWFLAG).
+ * SWFLAG is used to synchronize the access to all shared resource between
+ * SW, FW and HW.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+int32_t
+e1000_get_software_flag(struct e1000_hw *hw)
+{
+    int32_t timeout = PHY_CFG_TIMEOUT;
+    uint32_t extcnf_ctrl;
+    DEBUGFUNC("e1000_get_software_flag");
+    if (hw->mac_type == e1000_ich8lan) {
+        while (timeout) {
+            extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
+            extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+            E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl);
+            extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
+            if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+                break;
+            msec_delay_irq(1);
+            timeout--;
+        }
+        if (!timeout) {
+            DEBUGOUT("FW or HW locks the resource too long.\n");
+            return -E1000_ERR_CONFIG;
+        }
+    }
+    return E1000_SUCCESS;
+}
+/***************************************************************************
+ *
+ * Release software semaphore FLAG bit (SWFLAG).
+ * SWFLAG is used to synchronize the access to all shared resource between
+ * SW, FW and HW.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+void
+e1000_release_software_flag(struct e1000_hw *hw)
+{
+    uint32_t extcnf_ctrl;
+    DEBUGFUNC("e1000_release_software_flag");
+    if (hw->mac_type == e1000_ich8lan) {
+        extcnf_ctrl= E1000_READ_REG(hw, EXTCNF_CTRL);
+        extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+        E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl);
+    }
+    return;
+}
+/***************************************************************************
+ *
+ * Disable dynamic power down mode in ife PHY.
+ * It can be used to workaround band-gap problem.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+int32_t
+e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw)
+{
+    uint16_t phy_data;
+    int32_t ret_val = E1000_SUCCESS;
+    DEBUGFUNC("e1000_ife_disable_dynamic_power_down");
+    if (hw->phy_type == e1000_phy_ife) {
+        ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
+        if (ret_val)
+            return ret_val;
+        phy_data |=  IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN;
+        ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data);
+    }
+    return ret_val;
+}
+/***************************************************************************
+ *
+ * Enable dynamic power down mode in ife PHY.
+ * It can be used to workaround band-gap problem.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+int32_t
+e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw)
+{
+    uint16_t phy_data;
+    int32_t ret_val = E1000_SUCCESS;
+    DEBUGFUNC("e1000_ife_enable_dynamic_power_down");
+    if (hw->phy_type == e1000_phy_ife) {
+        ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
+        if (ret_val)
+            return ret_val;
+        phy_data &=  ~IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN;
+        ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data);
+    }
+    return ret_val;
+}
+/******************************************************************************
+ * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access
+ * register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+int32_t
+e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
+                       uint16_t *data)
+{
+    int32_t  error = E1000_SUCCESS;
+    uint32_t flash_bank = 0;
+    uint32_t act_offset = 0;
+    uint32_t bank_offset = 0;
+    uint16_t word = 0;
+    uint16_t i = 0;
+    /* We need to know which is the valid flash bank.  In the event
+     * that we didn't allocate eeprom_shadow_ram, we may not be
+     * managing flash_bank.  So it cannot be trusted and needs
+     * to be updated with each read.
+     */
+    /* Value of bit 22 corresponds to the flash bank we're on. */
+    flash_bank = (E1000_READ_REG(hw, EECD) & E1000_EECD_SEC1VAL) ? 1 : 0;
+    /* Adjust offset appropriately if we're on bank 1 - adjust for word size */
+    bank_offset = flash_bank * (hw->flash_bank_size * 2);
+    error = e1000_get_software_flag(hw);
+    if (error != E1000_SUCCESS)
+        return error;
+    for (i = 0; i < words; i++) {
+        if (hw->eeprom_shadow_ram != NULL &&
+            hw->eeprom_shadow_ram[offset+i].modified == TRUE) {
+            data[i] = hw->eeprom_shadow_ram[offset+i].eeprom_word;
+        } else {
+            /* The NVM part needs a byte offset, hence * 2 */
+            act_offset = bank_offset + ((offset + i) * 2);
+            error = e1000_read_ich8_word(hw, act_offset, &word);
+            if (error != E1000_SUCCESS)
+                break;
+            data[i] = word;
+        }
+    }
+    e1000_release_software_flag(hw);
+    return error;
+}
+/******************************************************************************
+ * Writes a 16 bit word or words to the EEPROM using the ICH8's flash access
+ * register.  Actually, writes are written to the shadow ram cache in the hw
+ * structure hw->e1000_shadow_ram.  e1000_commit_shadow_ram flushes this to
+ * the NVM, which occurs when the NVM checksum is updated.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to write
+ * words - number of words to write
+ * data - words to write to the EEPROM
+ *****************************************************************************/
+int32_t
+e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
+                        uint16_t *data)
+{
+    uint32_t i = 0;
+    int32_t error = E1000_SUCCESS;
+    error = e1000_get_software_flag(hw);
+    if (error != E1000_SUCCESS)
+        return error;
+    /* A driver can write to the NVM only if it has eeprom_shadow_ram
+     * allocated.  Subsequent reads to the modified words are read from
+     * this cached structure as well.  Writes will only go into this
+     * cached structure unless it's followed by a call to
+     * e1000_update_eeprom_checksum() where it will commit the changes
+     * and clear the "modified" field.
+     */
+    if (hw->eeprom_shadow_ram != NULL) {
+        for (i = 0; i < words; i++) {
+            if ((offset + i) < E1000_SHADOW_RAM_WORDS) {
+                hw->eeprom_shadow_ram[offset+i].modified = TRUE;
+                hw->eeprom_shadow_ram[offset+i].eeprom_word = data[i];
+            } else {
+                error = -E1000_ERR_EEPROM;
+                break;
+            }
+        }
+    } else {
+        /* Drivers have the option to not allocate eeprom_shadow_ram as long
+         * as they don't perform any NVM writes.  An attempt in doing so
+         * will result in this error.
+         */
+        error = -E1000_ERR_EEPROM;
+    }
+    e1000_release_software_flag(hw);
+    return error;
+}
+/******************************************************************************
+ * This function does initial flash setup so that a new read/write/erase cycle
+ * can be started.
+ *
+ * hw - The pointer to the hw structure
+ ****************************************************************************/
+int32_t
+e1000_ich8_cycle_init(struct e1000_hw *hw)
+{
+    union ich8_hws_flash_status hsfsts;
+    int32_t error = E1000_ERR_EEPROM;
+    int32_t i     = 0;
+    DEBUGFUNC("e1000_ich8_cycle_init");
+    hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+    /* May be check the Flash Des Valid bit in Hw status */
+    if (hsfsts.hsf_status.fldesvalid == 0) {
+        DEBUGOUT("Flash descriptor invalid.  SW Sequencing must be used.");
+        return error;
+    }
+    /* Clear FCERR in Hw status by writing 1 */
+    /* Clear DAEL in Hw status by writing a 1 */
+    hsfsts.hsf_status.flcerr = 1;
+    hsfsts.hsf_status.dael = 1;
+    E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+    /* Either we should have a hardware SPI cycle in progress bit to check
+     * against, in order to start a new cycle or FDONE bit should be changed
+     * in the hardware so that it is 1 after harware reset, which can then be
+     * used as an indication whether a cycle is in progress or has been
+     * completed .. we should also have some software semaphore mechanism to
+     * guard FDONE or the cycle in progress bit so that two threads access to
+     * those bits can be sequentiallized or a way so that 2 threads dont
+     * start the cycle at the same time */
+    if (hsfsts.hsf_status.flcinprog == 0) {
+        /* There is no cycle running at present, so we can start a cycle */
+        /* Begin by setting Flash Cycle Done. */
+        hsfsts.hsf_status.flcdone = 1;
+        E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+        error = E1000_SUCCESS;
+    } else {
+        /* otherwise poll for sometime so the current cycle has a chance
+         * to end before giving up. */
+        for (i = 0; i < ICH8_FLASH_COMMAND_TIMEOUT; i++) {
+            hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+            if (hsfsts.hsf_status.flcinprog == 0) {
+                error = E1000_SUCCESS;
+                break;
+            }
+            udelay(1);
+        }
+        if (error == E1000_SUCCESS) {
+            /* Successful in waiting for previous cycle to timeout,
+             * now set the Flash Cycle Done. */
+            hsfsts.hsf_status.flcdone = 1;
+            E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+        } else {
+            DEBUGOUT("Flash controller busy, cannot get access");
+        }
+    }
+    return error;
+}
+/******************************************************************************
+ * This function starts a flash cycle and waits for its completion
+ *
+ * hw - The pointer to the hw structure
+ ****************************************************************************/
+int32_t
+e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout)
+{
+    union ich8_hws_flash_ctrl hsflctl;
+    union ich8_hws_flash_status hsfsts;
+    int32_t error = E1000_ERR_EEPROM;
+    uint32_t i = 0;
+    /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
+    hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+    hsflctl.hsf_ctrl.flcgo = 1;
+    E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+    /* wait till FDONE bit is set to 1 */
+    do {
+        hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+        if (hsfsts.hsf_status.flcdone == 1)
+            break;
+        udelay(1);
+        i++;
+    } while (i < timeout);
+    if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) {
+        error = E1000_SUCCESS;
+    }
+    return error;
+}
+/******************************************************************************
+ * Reads a byte or word from the NVM using the ICH8 flash access registers.
+ *
+ * hw - The pointer to the hw structure
+ * index - The index of the byte or word to read.
+ * size - Size of data to read, 1=byte 2=word
+ * data - Pointer to the word to store the value read.
+ *****************************************************************************/
+int32_t
+e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
+                     uint32_t size, uint16_t* data)
+{
+    union ich8_hws_flash_status hsfsts;
+    union ich8_hws_flash_ctrl hsflctl;
+    uint32_t flash_linear_address;
+    uint32_t flash_data = 0;
+    int32_t error = -E1000_ERR_EEPROM;
+    int32_t count = 0;
+    DEBUGFUNC("e1000_read_ich8_data");
+    if (size < 1  || size > 2 || data == 0x0 ||
+        index > ICH8_FLASH_LINEAR_ADDR_MASK)
+        return error;
+    flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) +
+                           hw->flash_base_addr;
+    do {
+        udelay(1);
+        /* Steps */
+        error = e1000_ich8_cycle_init(hw);
+        if (error != E1000_SUCCESS)
+            break;
+        hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+        /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+        hsflctl.hsf_ctrl.fldbcount = size - 1;
+        hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_READ;
+        E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+        /* Write the last 24 bits of index into Flash Linear address field in
+         * Flash Address */
+        /* TODO: TBD maybe check the index against the size of flash */
+        E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+        error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT);
+        /* Check if FCERR is set to 1, if set to 1, clear it and try the whole
+         * sequence a few more times, else read in (shift in) the Flash Data0,
+         * the order is least significant byte first msb to lsb */
+        if (error == E1000_SUCCESS) {
+            flash_data = E1000_READ_ICH8_REG(hw, ICH8_FLASH_FDATA0);
+            if (size == 1) {
+                *data = (uint8_t)(flash_data & 0x000000FF);
+            } else if (size == 2) {
+                *data = (uint16_t)(flash_data & 0x0000FFFF);
+            }
+            break;
+        } else {
+            /* If we've gotten here, then things are probably completely hosed,
+             * but if the error condition is detected, it won't hurt to give
+             * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times.
+             */
+            hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+            if (hsfsts.hsf_status.flcerr == 1) {
+                /* Repeat for some time before giving up. */
+                continue;
+            } else if (hsfsts.hsf_status.flcdone == 0) {
+                DEBUGOUT("Timeout error - flash cycle did not complete.");
+                break;
+            }
+        }
+    } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT);
+    return error;
+}
+/******************************************************************************
+ * Writes One /two bytes to the NVM using the ICH8 flash access registers.
+ *
+ * hw - The pointer to the hw structure
+ * index - The index of the byte/word to read.
+ * size - Size of data to read, 1=byte 2=word
+ * data - The byte(s) to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
+                      uint16_t data)
+{
+    union ich8_hws_flash_status hsfsts;
+    union ich8_hws_flash_ctrl hsflctl;
+    uint32_t flash_linear_address;
+    uint32_t flash_data = 0;
+    int32_t error = -E1000_ERR_EEPROM;
+    int32_t count = 0;
+    DEBUGFUNC("e1000_write_ich8_data");
+    if (size < 1  || size > 2 || data > size * 0xff ||
+        index > ICH8_FLASH_LINEAR_ADDR_MASK)
+        return error;
+    flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) +
+                           hw->flash_base_addr;
+    do {
+        udelay(1);
+        /* Steps */
+        error = e1000_ich8_cycle_init(hw);
+        if (error != E1000_SUCCESS)
+            break;
+        hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+        /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+        hsflctl.hsf_ctrl.fldbcount = size -1;
+        hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_WRITE;
+        E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+        /* Write the last 24 bits of index into Flash Linear address field in
+         * Flash Address */
+        E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+        if (size == 1)
+            flash_data = (uint32_t)data & 0x00FF;
+        else
+            flash_data = (uint32_t)data;
+        E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FDATA0, flash_data);
+        /* check if FCERR is set to 1 , if set to 1, clear it and try the whole
+         * sequence a few more times else done */
+        error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT);
+        if (error == E1000_SUCCESS) {
+            break;
+        } else {
+            /* If we're here, then things are most likely completely hosed,
+             * but if the error condition is detected, it won't hurt to give
+             * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times.
+             */
+            hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+            if (hsfsts.hsf_status.flcerr == 1) {
+                /* Repeat for some time before giving up. */
+                continue;
+            } else if (hsfsts.hsf_status.flcdone == 0) {
+                DEBUGOUT("Timeout error - flash cycle did not complete.");
+                break;
+            }
+        }
+    } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT);
+    return error;
+}
+/******************************************************************************
+ * Reads a single byte from the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to read.
+ * data - Pointer to a byte to store the value read.
+ *****************************************************************************/
+int32_t
+e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data)
+{
+    int32_t status = E1000_SUCCESS;
+    uint16_t word = 0;
+    status = e1000_read_ich8_data(hw, index, 1, &word);
+    if (status == E1000_SUCCESS) {
+        *data = (uint8_t)word;
+    }
+    return status;
+}
+/******************************************************************************
+ * Writes a single byte to the NVM using the ICH8 flash access registers.
+ * Performs verification by reading back the value and then going through
+ * a retry algorithm before giving up.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to write.
+ * byte - The byte to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte)
+{
+    int32_t error = E1000_SUCCESS;
+    int32_t program_retries;
+    uint8_t temp_byte;
+    e1000_write_ich8_byte(hw, index, byte);
+    udelay(100);
+    for (program_retries = 0; program_retries < 100; program_retries++) {
+        e1000_read_ich8_byte(hw, index, &temp_byte);
+        if (temp_byte == byte)
+            break;
+        udelay(10);
+        e1000_write_ich8_byte(hw, index, byte);
+        udelay(100);
+    }
+    if (program_retries == 100)
+        error = E1000_ERR_EEPROM;
+    return error;
+}
+/******************************************************************************
+ * Writes a single byte to the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to read.
+ * data - The byte to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data)
+{
+    int32_t status = E1000_SUCCESS;
+    uint16_t word = (uint16_t)data;
+    status = e1000_write_ich8_data(hw, index, 1, word);
+    return status;
+}
+/******************************************************************************
+ * Reads a word from the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The starting byte index of the word to read.
+ * data - Pointer to a word to store the value read.
+ *****************************************************************************/
+int32_t
+e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data)
+{
+    int32_t status = E1000_SUCCESS;
+    status = e1000_read_ich8_data(hw, index, 2, data);
+    return status;
+}
+/******************************************************************************
+ * Writes a word to the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The starting byte index of the word to read.
+ * data - The word to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data)
+{
+    int32_t status = E1000_SUCCESS;
+    status = e1000_write_ich8_data(hw, index, 2, data);
+    return status;
+}
+/******************************************************************************
+ * Erases the bank specified. Each bank is a 4k block. Segments are 0 based.
+ * segment N is 4096 * N + flash_reg_addr.
+ *
+ * hw - pointer to e1000_hw structure
+ * segment - 0 for first segment, 1 for second segment, etc.
+ *****************************************************************************/
+int32_t
+e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment)
+{
+    union ich8_hws_flash_status hsfsts;
+    union ich8_hws_flash_ctrl hsflctl;
+    uint32_t flash_linear_address;
+    int32_t  count = 0;
+    int32_t  error = E1000_ERR_EEPROM;
+    int32_t  iteration, seg_size;
+    int32_t  sector_size;
+    int32_t  j = 0;
+    int32_t  error_flag = 0;
+    hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+    /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */
+    /* 00: The Hw sector is 256 bytes, hence we need to erase 16
+     *     consecutive sectors.  The start index for the nth Hw sector can be
+     *     calculated as = segment * 4096 + n * 256
+     * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
+     *     The start index for the nth Hw sector can be calculated
+     *     as = segment * 4096
+     * 10: Error condition
+     * 11: The Hw sector size is much bigger than the size asked to
+     *     erase...error condition */
+    if (hsfsts.hsf_status.berasesz == 0x0) {
+        /* Hw sector size 256 */
+        sector_size = seg_size = ICH8_FLASH_SEG_SIZE_256;
+        iteration = ICH8_FLASH_SECTOR_SIZE / ICH8_FLASH_SEG_SIZE_256;
+    } else if (hsfsts.hsf_status.berasesz == 0x1) {
+        sector_size = seg_size = ICH8_FLASH_SEG_SIZE_4K;
+        iteration = 1;
+    } else if (hsfsts.hsf_status.berasesz == 0x3) {
+        sector_size = seg_size = ICH8_FLASH_SEG_SIZE_64K;
+        iteration = 1;
+    } else {
+        return error;
+    }
+    for (j = 0; j < iteration ; j++) {
+        do {
+            count++;
+            /* Steps */
+            error = e1000_ich8_cycle_init(hw);
+            if (error != E1000_SUCCESS) {
+                error_flag = 1;
+                break;
+            }
+            /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash
+             * Control */
+            hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+            hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_ERASE;
+            E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+            /* Write the last 24 bits of an index within the block into Flash
+             * Linear address field in Flash Address.  This probably needs to
+             * be calculated here based off the on-chip segment size and the
+             * software segment size assumed (4K) */
+            /* TBD */
+            flash_linear_address = segment * sector_size + j * seg_size;
+            flash_linear_address &= ICH8_FLASH_LINEAR_ADDR_MASK;
+            flash_linear_address += hw->flash_base_addr;
+            E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+            error = e1000_ich8_flash_cycle(hw, 1000000);
+            /* Check if FCERR is set to 1.  If 1, clear it and try the whole
+             * sequence a few more times else Done */
+            if (error == E1000_SUCCESS) {
+                break;
+            } else {
+                hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+                if (hsfsts.hsf_status.flcerr == 1) {
+                    /* repeat for some time before giving up */
+                    continue;
+                } else if (hsfsts.hsf_status.flcdone == 0) {
+                    error_flag = 1;
+                    break;
+                }
+            }
+        } while ((count < ICH8_FLASH_CYCLE_REPEAT_COUNT) && !error_flag);
+        if (error_flag == 1)
+            break;
+    }
+    if (error_flag != 1)
+        error = E1000_SUCCESS;
+    return error;
+}
+/******************************************************************************
+ *
+ * Reverse duplex setting without breaking the link.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ *****************************************************************************/
+int32_t
+e1000_duplex_reversal(struct e1000_hw *hw)
+{
+    int32_t ret_val;
+    uint16_t phy_data;
+    if (hw->phy_type != e1000_phy_igp_3)
+        return E1000_SUCCESS;
+    ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+    if (ret_val)
+        return ret_val;
+    phy_data ^= MII_CR_FULL_DUPLEX;
+    ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+    if (ret_val)
+        return ret_val;
+    ret_val = e1000_read_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, &phy_data);
+    if (ret_val)
+        return ret_val;
+    phy_data |= IGP3_PHY_MISC_DUPLEX_MANUAL_SET;
+    ret_val = e1000_write_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, phy_data);
+    return ret_val;
+}
+int32_t
+e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
+                                      uint32_t cnf_base_addr, uint32_t cnf_size)
+{
+    uint32_t ret_val = E1000_SUCCESS;
+    uint16_t word_addr, reg_data, reg_addr;
+    uint16_t i;
+    /* cnf_base_addr is in DWORD */
+    word_addr = (uint16_t)(cnf_base_addr << 1);
+    /* cnf_size is returned in size of dwords */
+    for (i = 0; i < cnf_size; i++) {
+        ret_val = e1000_read_eeprom(hw, (word_addr + i*2), 1, &reg_data);
+        if (ret_val)
+            return ret_val;
+        ret_val = e1000_read_eeprom(hw, (word_addr + i*2 + 1), 1, &reg_addr);
+        if (ret_val)
+            return ret_val;
+        ret_val = e1000_get_software_flag(hw);
+        if (ret_val != E1000_SUCCESS)
+            return ret_val;
+        ret_val = e1000_write_phy_reg_ex(hw, (uint32_t)reg_addr, reg_data);
+        e1000_release_software_flag(hw);
+    }
+    return ret_val;
+}
+int32_t
+e1000_init_lcd_from_nvm(struct e1000_hw *hw)
+{
+    uint32_t reg_data, cnf_base_addr, cnf_size, ret_val, loop;
+    if (hw->phy_type != e1000_phy_igp_3)
+          return E1000_SUCCESS;
+    /* Check if SW needs configure the PHY */
+    reg_data = E1000_READ_REG(hw, FEXTNVM);
+    if (!(reg_data & FEXTNVM_SW_CONFIG))
+        return E1000_SUCCESS;
+    /* Wait for basic configuration completes before proceeding*/
+    loop = 0;
+    do {
+        reg_data = E1000_READ_REG(hw, STATUS) & E1000_STATUS_LAN_INIT_DONE;
+        udelay(100);
+        loop++;
+    } while ((!reg_data) && (loop < 50));
+    /* Clear the Init Done bit for the next init event */
+    reg_data = E1000_READ_REG(hw, STATUS);
+    reg_data &= ~E1000_STATUS_LAN_INIT_DONE;
+    E1000_WRITE_REG(hw, STATUS, reg_data);
+    /* Make sure HW does not configure LCD from PHY extended configuration
+       before SW configuration */
+    reg_data = E1000_READ_REG(hw, EXTCNF_CTRL);
+    if ((reg_data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) == 0x0000) {
+        reg_data = E1000_READ_REG(hw, EXTCNF_SIZE);
+        cnf_size = reg_data & E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH;
+        cnf_size >>= 16;
+        if (cnf_size) {
+            reg_data = E1000_READ_REG(hw, EXTCNF_CTRL);
+            cnf_base_addr = reg_data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER;
+            /* cnf_base_addr is in DWORD */
+            cnf_base_addr >>= 16;
+            /* Configure LCD from extended configuration region. */
+            ret_val = e1000_init_lcd_from_nvm_config_region(hw, cnf_base_addr,
+                                                            cnf_size);
+            if (ret_val)
+                return ret_val;
+        }
+    }
+    return E1000_SUCCESS;
+}
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 467c9ed944f8..f9341e3276b3 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -62,6 +62,7 @@ typedef enum {
    e1000_82572,
    e1000_82573,
    e1000_80003es2lan,
+    e1000_ich8lan,
    e1000_num_macs
 } e1000_mac_type;
@@ -70,6 +71,7 @@ typedef enum {
    e1000_eeprom_spi,
    e1000_eeprom_microwire,
    e1000_eeprom_flash,
+    e1000_eeprom_ich8,
    e1000_eeprom_none, /* No NVM support */
    e1000_num_eeprom_types
 } e1000_eeprom_type;
@@ -98,6 +100,11 @@ typedef enum {
    e1000_fc_default = 0xFF
 } e1000_fc_type;
+struct e1000_shadow_ram {
+    uint16_t    eeprom_word;
+    boolean_t   modified;
+};
 /* PCI bus types */
 typedef enum {
    e1000_bus_type_unknown = 0,
@@ -218,6 +225,8 @@ typedef enum {
    e1000_phy_igp,
    e1000_phy_igp_2,
    e1000_phy_gg82563,
+    e1000_phy_igp_3,
+    e1000_phy_ife,
    e1000_phy_undefined = 0xFF
 } e1000_phy_type;
@@ -313,6 +322,10 @@ int32_t e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy
 int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data);
 int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
 int32_t e1000_phy_reset(struct e1000_hw *hw);
+void e1000_phy_powerdown_workaround(struct e1000_hw *hw);
+int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
+int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size);
+int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw);
 int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
 int32_t e1000_validate_mdi_setting(struct e1000_hw *hw);
 int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data);
@@ -331,6 +344,7 @@ uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw);
 #define E1000_MNG_DHCP_COOKIE_OFFSET    0x6F0   /* Cookie offset */
 #define E1000_MNG_DHCP_COOKIE_LENGTH    0x10    /* Cookie length */
 #define E1000_MNG_IAMT_MODE             0x3
+#define E1000_MNG_ICH_IAMT_MODE         0x2
 #define E1000_IAMT_SIGNATURE            0x544D4149 /* Intel(R) Active Management Technology signature */
 #define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
@@ -388,6 +402,8 @@ int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num);
 int32_t e1000_read_mac_addr(struct e1000_hw * hw);
 int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
 void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask);
+void e1000_release_software_flag(struct e1000_hw *hw);
+int32_t e1000_get_software_flag(struct e1000_hw *hw);
 /* Filters (multicast, vlan, receive) */
 void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t * mc_addr_list, uint32_t mc_addr_count, uint32_t pad, uint32_t rar_used_count);
@@ -401,6 +417,7 @@ int32_t e1000_setup_led(struct e1000_hw *hw);
 int32_t e1000_cleanup_led(struct e1000_hw *hw);
 int32_t e1000_led_on(struct e1000_hw *hw);
 int32_t e1000_led_off(struct e1000_hw *hw);
+int32_t e1000_blink_led_start(struct e1000_hw *hw);
 /* Adaptive IFS Functions */
@@ -422,6 +439,29 @@ int32_t e1000_disable_pciex_master(struct e1000_hw *hw);
 int32_t e1000_get_software_semaphore(struct e1000_hw *hw);
 void e1000_release_software_semaphore(struct e1000_hw *hw);
 int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
+int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop);
+int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index,
+                             uint8_t *data);
+int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
+                                     uint8_t byte);
+int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
+                              uint8_t byte);
+int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index,
+                             uint16_t *data);
+int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
+                             uint32_t size, uint16_t *data);
+int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
+                               uint16_t words, uint16_t *data);
+int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
+                                uint16_t words, uint16_t *data);
+int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment);
+#define E1000_READ_REG_IO(a, reg) \
+    e1000_read_reg_io((a), E1000_##reg)
+#define E1000_WRITE_REG_IO(a, reg, val) \
+    e1000_write_reg_io((a), E1000_##reg, val)
 /* PCI Device IDs */
 #define E1000_DEV_ID_82542               0x1000
@@ -446,6 +486,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
 #define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
 #define E1000_DEV_ID_82541EI             0x1013
 #define E1000_DEV_ID_82541EI_MOBILE      0x1018
+#define E1000_DEV_ID_82541ER_LOM         0x1014
 #define E1000_DEV_ID_82541ER             0x1078
 #define E1000_DEV_ID_82547GI             0x1075
 #define E1000_DEV_ID_82541GI             0x1076
@@ -457,18 +498,28 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
 #define E1000_DEV_ID_82546GB_PCIE        0x108A
 #define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
 #define E1000_DEV_ID_82547EI             0x1019
+#define E1000_DEV_ID_82547EI_MOBILE      0x101A
 #define E1000_DEV_ID_82571EB_COPPER      0x105E
 #define E1000_DEV_ID_82571EB_FIBER       0x105F
 #define E1000_DEV_ID_82571EB_SERDES      0x1060
 #define E1000_DEV_ID_82572EI_COPPER      0x107D
 #define E1000_DEV_ID_82572EI_FIBER       0x107E
 #define E1000_DEV_ID_82572EI_SERDES      0x107F
+#define E1000_DEV_ID_82572EI             0x10B9
 #define E1000_DEV_ID_82573E              0x108B
 #define E1000_DEV_ID_82573E_IAMT         0x108C
 #define E1000_DEV_ID_82573L              0x109A
 #define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
 #define E1000_DEV_ID_80003ES2LAN_COPPER_DPT     0x1096
 #define E1000_DEV_ID_80003ES2LAN_SERDES_DPT     0x1098
+#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT     0x10BA
+#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT     0x10BB
+#define E1000_DEV_ID_ICH8_IGP_M_AMT      0x1049
+#define E1000_DEV_ID_ICH8_IGP_AMT        0x104A
+#define E1000_DEV_ID_ICH8_IGP_C          0x104B
+#define E1000_DEV_ID_ICH8_IFE            0x104C
+#define E1000_DEV_ID_ICH8_IGP_M          0x104D
 #define NODE_ADDRESS_SIZE 6
@@ -539,6 +590,14 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
    E1000_IMS_RXSEQ  |    \
    E1000_IMS_LSC)
+/* Additional interrupts need to be handled for e1000_ich8lan:
+    DSW = The FW changed the status of the DISSW bit in FWSM
+    PHYINT = The LAN connected device generates an interrupt
+    EPRST = Manageability reset event */
+#define IMS_ICH8LAN_ENABLE_MASK (\
+    E1000_IMS_DSW   | \
+    E1000_IMS_PHYINT | \
+    E1000_IMS_EPRST)
 /* Number of high/low register pairs in the RAR. The RAR (Receive Address
 * Registers) holds the directed and multicast addresses that we monitor. We
@@ -546,6 +605,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
 * E1000_RAR_ENTRIES - 1 multicast addresses.
 */
 #define E1000_RAR_ENTRIES 15
+#define E1000_RAR_ENTRIES_ICH8LAN  7
 #define MIN_NUMBER_OF_DESCRIPTORS 8
 #define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
@@ -767,6 +827,9 @@ struct e1000_data_desc {
 #define E1000_MC_TBL_SIZE          128  /* Multicast Filter Table (4096 bits) */
 #define E1000_VLAN_FILTER_TBL_SIZE 128  /* VLAN Filter Table (4096 bits) */
+#define E1000_NUM_UNICAST_ICH8LAN  7
+#define E1000_MC_TBL_SIZE_ICH8LAN  32
 /* Receive Address Register */
 struct e1000_rar {
@@ -776,6 +839,7 @@ struct e1000_rar {
 /* Number of entries in the Multicast Table Array (MTA). */
 #define E1000_NUM_MTA_REGISTERS 128
+#define E1000_NUM_MTA_REGISTERS_ICH8LAN 32
 /* IPv4 Address Table Entry */
 struct e1000_ipv4_at_entry {
@@ -786,6 +850,7 @@ struct e1000_ipv4_at_entry {
 /* Four wakeup IP addresses are supported */
 #define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
 #define E1000_IP4AT_SIZE                  E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
+#define E1000_IP4AT_SIZE_ICH8LAN          3
 #define E1000_IP6AT_SIZE                  1
 /* IPv6 Address Table Entry */
@@ -844,6 +909,7 @@ struct e1000_ffvt_entry {
 #define E1000_FLA      0x0001C  /* Flash Access - RW */
 #define E1000_MDIC     0x00020  /* MDI Control - RW */
 #define E1000_SCTL     0x00024  /* SerDes Control - RW */
+#define E1000_FEXTNVM  0x00028  /* Future Extended NVM register */
 #define E1000_FCAL     0x00028  /* Flow Control Address Low - RW */
 #define E1000_FCAH     0x0002C  /* Flow Control Address High -RW */
 #define E1000_FCT      0x00030  /* Flow Control Type - RW */
@@ -872,6 +938,8 @@ struct e1000_ffvt_entry {
 #define E1000_LEDCTL   0x00E00  /* LED Control - RW */
 #define E1000_EXTCNF_CTRL  0x00F00  /* Extended Configuration Control */
 #define E1000_EXTCNF_SIZE  0x00F08  /* Extended Configuration Size */
+#define E1000_PHY_CTRL     0x00F10  /* PHY Control Register in CSR */
+#define FEXTNVM_SW_CONFIG  0x0001
 #define E1000_PBA      0x01000  /* Packet Buffer Allocation - RW */
 #define E1000_PBS      0x01008  /* Packet Buffer Size */
 #define E1000_EEMNGCTL 0x01010  /* MNG EEprom Control */
@@ -899,11 +967,13 @@ struct e1000_ffvt_entry {
 #define E1000_RDH0     E1000_RDH   /* RX Desc Head (0) - RW */
 #define E1000_RDT0     E1000_RDT   /* RX Desc Tail (0) - RW */
 #define E1000_RDTR0    E1000_RDTR  /* RX Delay Timer (0) - RW */
-#define E1000_RXDCTL   0x02828  /* RX Descriptor Control - RW */
+#define E1000_RXDCTL   0x02828  /* RX Descriptor Control queue 0 - RW */
+#define E1000_RXDCTL1  0x02928  /* RX Descriptor Control queue 1 - RW */
 #define E1000_RADV     0x0282C  /* RX Interrupt Absolute Delay Timer - RW */
 #define E1000_RSRPD    0x02C00  /* RX Small Packet Detect - RW */
 #define E1000_RAID     0x02C08  /* Receive Ack Interrupt Delay - RW */
 #define E1000_TXDMAC   0x03000  /* TX DMA Control - RW */
+#define E1000_KABGTXD  0x03004  /* AFE Band Gap Transmit Ref Data */
 #define E1000_TDFH     0x03410  /* TX Data FIFO Head - RW */
 #define E1000_TDFT     0x03418  /* TX Data FIFO Tail - RW */
 #define E1000_TDFHS    0x03420  /* TX Data FIFO Head Saved - RW */
@@ -1050,6 +1120,7 @@ struct e1000_ffvt_entry {
 #define E1000_82542_FLA      E1000_FLA
 #define E1000_82542_MDIC     E1000_MDIC
 #define E1000_82542_SCTL     E1000_SCTL
+#define E1000_82542_FEXTNVM  E1000_FEXTNVM
 #define E1000_82542_FCAL     E1000_FCAL
 #define E1000_82542_FCAH     E1000_FCAH
 #define E1000_82542_FCT      E1000_FCT
@@ -1073,6 +1144,19 @@ struct e1000_ffvt_entry {
 #define E1000_82542_RDLEN0   E1000_82542_RDLEN
 #define E1000_82542_RDH0     E1000_82542_RDH
 #define E1000_82542_RDT0     E1000_82542_RDT
+#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication
+                                                       * RX Control - RW */
+#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
+#define E1000_82542_RDBAH3   0x02B04 /* RX Desc Base High Queue 3 - RW */
+#define E1000_82542_RDBAL3   0x02B00 /* RX Desc Low Queue 3 - RW */
+#define E1000_82542_RDLEN3   0x02B08 /* RX Desc Length Queue 3 - RW */
+#define E1000_82542_RDH3     0x02B10 /* RX Desc Head Queue 3 - RW */
+#define E1000_82542_RDT3     0x02B18 /* RX Desc Tail Queue 3 - RW */
+#define E1000_82542_RDBAL2   0x02A00 /* RX Desc Base Low Queue 2 - RW */
+#define E1000_82542_RDBAH2   0x02A04 /* RX Desc Base High Queue 2 - RW */
+#define E1000_82542_RDLEN2   0x02A08 /* RX Desc Length Queue 2 - RW */
+#define E1000_82542_RDH2     0x02A10 /* RX Desc Head Queue 2 - RW */
+#define E1000_82542_RDT2     0x02A18 /* RX Desc Tail Queue 2 - RW */
 #define E1000_82542_RDTR1    0x00130
 #define E1000_82542_RDBAL1   0x00138
 #define E1000_82542_RDBAH1   0x0013C
@@ -1110,11 +1194,14 @@ struct e1000_ffvt_entry {
 #define E1000_82542_FLOP     E1000_FLOP
 #define E1000_82542_EXTCNF_CTRL  E1000_EXTCNF_CTRL
 #define E1000_82542_EXTCNF_SIZE  E1000_EXTCNF_SIZE
+#define E1000_82542_PHY_CTRL E1000_PHY_CTRL
 #define E1000_82542_ERT      E1000_ERT
 #define E1000_82542_RXDCTL   E1000_RXDCTL
+#define E1000_82542_RXDCTL1  E1000_RXDCTL1
 #define E1000_82542_RADV     E1000_RADV
 #define E1000_82542_RSRPD    E1000_RSRPD
 #define E1000_82542_TXDMAC   E1000_TXDMAC
+#define E1000_82542_KABGTXD  E1000_KABGTXD
 #define E1000_82542_TDFHS    E1000_TDFHS
 #define E1000_82542_TDFTS    E1000_TDFTS
 #define E1000_82542_TDFPC    E1000_TDFPC
@@ -1310,13 +1397,16 @@ struct e1000_hw_stats {
 /* Structure containing variables used by the shared code (e1000_hw.c) */
 struct e1000_hw {
-    uint8_t __iomem *hw_addr;
+    uint8_t *hw_addr;
    uint8_t *flash_address;
    e1000_mac_type mac_type;
    e1000_phy_type phy_type;
    uint32_t phy_init_script;
    e1000_media_type media_type;
    void *back;
+    struct e1000_shadow_ram *eeprom_shadow_ram;
+    uint32_t flash_bank_size;
+    uint32_t flash_base_addr;
    e1000_fc_type fc;
    e1000_bus_speed bus_speed;
    e1000_bus_width bus_width;
@@ -1328,6 +1418,7 @@ struct e1000_hw {
    uint32_t asf_firmware_present;
    uint32_t eeprom_semaphore_present;
    uint32_t swfw_sync_present;
+    uint32_t swfwhw_semaphore_present;
    unsigned long io_base;
    uint32_t phy_id;
    uint32_t phy_revision;
@@ -1387,6 +1478,7 @@ struct e1000_hw {
    boolean_t in_ifs_mode;
    boolean_t mng_reg_access_disabled;
    boolean_t leave_av_bit_off;
+    boolean_t kmrn_lock_loss_workaround_disabled;
 };
@@ -1435,6 +1527,7 @@ struct e1000_hw {
 #define E1000_CTRL_RTE      0x20000000  /* Routing tag enable */
 #define E1000_CTRL_VME      0x40000000  /* IEEE VLAN mode enable */
 #define E1000_CTRL_PHY_RST  0x80000000  /* PHY Reset */
+#define E1000_CTRL_SW2FW_INT 0x02000000  /* Initiate an interrupt to manageability engine */
 /* Device Status */
 #define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
@@ -1449,6 +1542,8 @@ struct e1000_hw {
 #define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
 #define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
 #define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200   /* Lan Init Completion
+                                                   by EEPROM/Flash */
 #define E1000_STATUS_ASDV       0x00000300      /* Auto speed detect value */
 #define E1000_STATUS_DOCK_CI    0x00000800      /* Change in Dock/Undock state. Clear on write '0'. */
 #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
@@ -1506,6 +1601,10 @@ struct e1000_hw {
 #define E1000_STM_OPCODE     0xDB00
 #define E1000_HICR_FW_RESET  0xC0
+#define E1000_SHADOW_RAM_WORDS     2048
+#define E1000_ICH8_NVM_SIG_WORD    0x13
+#define E1000_ICH8_NVM_SIG_MASK    0xC0
 /* EEPROM Read */
 #define E1000_EERD_START      0x00000001 /* Start Read */
 #define E1000_EERD_DONE       0x00000010 /* Read Done */
@@ -1551,7 +1650,6 @@ struct e1000_hw {
 #define E1000_CTRL_EXT_WR_WMARK_320   0x01000000
 #define E1000_CTRL_EXT_WR_WMARK_384   0x02000000
 #define E1000_CTRL_EXT_WR_WMARK_448   0x03000000
-#define E1000_CTRL_EXT_CANC           0x04000000  /* Interrupt delay cancellation */
 #define E1000_CTRL_EXT_DRV_LOAD       0x10000000  /* Driver loaded bit for FW */
 #define E1000_CTRL_EXT_IAME           0x08000000  /* Interrupt acknowledge Auto-mask */
 #define E1000_CTRL_EXT_INT_TIMER_CLR  0x20000000  /* Clear Interrupt timers after IMS clear */
@@ -1591,12 +1689,31 @@ struct e1000_hw {
 #define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS   0x00000800
 /* In-Band Control */
+#define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT    0x00000500
 #define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING  0x00000010
 /* Half-Duplex Control */
 #define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004
 #define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT  0x00000000
+#define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL       0x0000001E
+#define E1000_KUMCTRLSTA_DIAG_FELPBK           0x2000
+#define E1000_KUMCTRLSTA_DIAG_NELPBK           0x1000
+#define E1000_KUMCTRLSTA_K0S_100_EN            0x2000
+#define E1000_KUMCTRLSTA_K0S_GBE_EN            0x1000
+#define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK   0x0003
+#define E1000_KABGTXD_BGSQLBIAS                0x00050000
+#define E1000_PHY_CTRL_SPD_EN                  0x00000001
+#define E1000_PHY_CTRL_D0A_LPLU                0x00000002
+#define E1000_PHY_CTRL_NOND0A_LPLU             0x00000004
+#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE      0x00000008
+#define E1000_PHY_CTRL_GBE_DISABLE             0x00000040
+#define E1000_PHY_CTRL_B2B_EN                  0x00000080
 /* LED Control */
 #define E1000_LEDCTL_LED0_MODE_MASK       0x0000000F
 #define E1000_LEDCTL_LED0_MODE_SHIFT      0
@@ -1666,6 +1783,9 @@ struct e1000_hw {
 #define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
 #define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
 #define E1000_ICR_ALL_PARITY    0x03F00000 /* all parity error bits */
+#define E1000_ICR_DSW           0x00000020 /* FW changed the status of DISSW bit in the FWSM */
+#define E1000_ICR_PHYINT        0x00001000 /* LAN connected device generates an interrupt */
+#define E1000_ICR_EPRST         0x00100000 /* ME handware reset occurs */
 /* Interrupt Cause Set */
 #define E1000_ICS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
@@ -1692,6 +1812,9 @@ struct e1000_hw {
 #define E1000_ICS_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
 #define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
 #define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICS_DSW       E1000_ICR_DSW
+#define E1000_ICS_PHYINT    E1000_ICR_PHYINT
+#define E1000_ICS_EPRST     E1000_ICR_EPRST
 /* Interrupt Mask Set */
 #define E1000_IMS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
@@ -1718,6 +1841,9 @@ struct e1000_hw {
 #define E1000_IMS_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
 #define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
 #define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMS_DSW       E1000_ICR_DSW
+#define E1000_IMS_PHYINT    E1000_ICR_PHYINT
+#define E1000_IMS_EPRST     E1000_ICR_EPRST
 /* Interrupt Mask Clear */
 #define E1000_IMC_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
@@ -1744,6 +1870,9 @@ struct e1000_hw {
 #define E1000_IMC_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
 #define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
 #define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMC_DSW       E1000_ICR_DSW
+#define E1000_IMC_PHYINT    E1000_ICR_PHYINT
+#define E1000_IMC_EPRST     E1000_ICR_EPRST
 /* Receive Control */
 #define E1000_RCTL_RST            0x00000001    /* Software reset */
@@ -1918,9 +2047,10 @@ struct e1000_hw {
 #define E1000_MRQC_RSS_FIELD_MASK           0xFFFF0000
 #define E1000_MRQC_RSS_FIELD_IPV4_TCP       0x00010000
 #define E1000_MRQC_RSS_FIELD_IPV4           0x00020000
-#define E1000_MRQC_RSS_FIELD_IPV6_TCP       0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX    0x00040000
 #define E1000_MRQC_RSS_FIELD_IPV6_EX        0x00080000
 #define E1000_MRQC_RSS_FIELD_IPV6           0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP       0x00200000
 /* Definitions for power management and wakeup registers */
 /* Wake Up Control */
@@ -2010,6 +2140,15 @@ struct e1000_hw {
 #define E1000_FWSM_MODE_SHIFT            1
 #define E1000_FWSM_FW_VALID     0x00008000 /* FW established a valid mode */
+#define E1000_FWSM_RSPCIPHY        0x00000040 /* Reset PHY on PCI reset */
+#define E1000_FWSM_DISSW           0x10000000 /* FW disable SW Write Access */
+#define E1000_FWSM_SKUSEL_MASK     0x60000000 /* LAN SKU select */
+#define E1000_FWSM_SKUEL_SHIFT     29
+#define E1000_FWSM_SKUSEL_EMB      0x0 /* Embedded SKU */
+#define E1000_FWSM_SKUSEL_CONS     0x1 /* Consumer SKU */
+#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */
+#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */
 /* FFLT Debug Register */
 #define E1000_FFLT_DBG_INVC     0x00100000 /* Invalid /C/ code handling */
@@ -2082,6 +2221,8 @@ struct e1000_host_command_info {
                             E1000_GCR_TXDSCW_NO_SNOOP      | \
                             E1000_GCR_TXDSCR_NO_SNOOP)
+#define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL
 #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
 /* Function Active and Power State to MNG */
 #define E1000_FACTPS_FUNC0_POWER_STATE_MASK         0x00000003
@@ -2140,8 +2281,10 @@ struct e1000_host_command_info {
 #define EEPROM_PHY_CLASS_WORD         0x0007
 #define EEPROM_INIT_CONTROL1_REG      0x000A
 #define EEPROM_INIT_CONTROL2_REG      0x000F
+#define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010
 #define EEPROM_INIT_CONTROL3_PORT_B   0x0014
 #define EEPROM_INIT_3GIO_3            0x001A
+#define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020
 #define EEPROM_INIT_CONTROL3_PORT_A   0x0024
 #define EEPROM_CFG                    0x0012
 #define EEPROM_FLASH_VERSION          0x0032
@@ -2153,10 +2296,16 @@ struct e1000_host_command_info {
 /* Word definitions for ID LED Settings */
 #define ID_LED_RESERVED_0000 0x0000
 #define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_RESERVED_82573  0xF746
+#define ID_LED_DEFAULT_82573   0x1811
 #define ID_LED_DEFAULT       ((ID_LED_OFF1_ON2 << 12) | \
                              (ID_LED_OFF1_OFF2 << 8) | \
                              (ID_LED_DEF1_DEF2 << 4) | \
                              (ID_LED_DEF1_DEF2))
+#define ID_LED_DEFAULT_ICH8LAN  ((ID_LED_DEF1_DEF2 << 12) | \
+                                 (ID_LED_DEF1_OFF2 <<  8) | \
+                                 (ID_LED_DEF1_ON2  <<  4) | \
+                                 (ID_LED_DEF1_DEF2))
 #define ID_LED_DEF1_DEF2     0x1
 #define ID_LED_DEF1_ON2      0x2
 #define ID_LED_DEF1_OFF2     0x3
@@ -2191,6 +2340,11 @@ struct e1000_host_command_info {
 #define EEPROM_WORD0F_ASM_DIR    0x2000
 #define EEPROM_WORD0F_ANE        0x0800
 #define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
+#define EEPROM_WORD0F_LPLU       0x0001
+/* Mask bits for fields in Word 0x10/0x20 of the EEPROM */
+#define EEPROM_WORD1020_GIGA_DISABLE         0x0010
+#define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008
 /* Mask bits for fields in Word 0x1a of the EEPROM */
 #define EEPROM_WORD1A_ASPM_MASK  0x000C
@@ -2265,23 +2419,29 @@ struct e1000_host_command_info {
 #define E1000_EXTCNF_CTRL_D_UD_OWNER        0x00000010
 #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
 #define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040
-#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER   0x1FFF0000
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER   0x0FFF0000
 #define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH    0x000000FF
 #define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH   0x0000FF00
 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH   0x00FF0000
+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE  0x00000001
+#define E1000_EXTCNF_CTRL_SWFLAG            0x00000020
 /* PBA constants */
+#define E1000_PBA_8K 0x0008    /* 8KB, default Rx allocation */
 #define E1000_PBA_12K 0x000C    /* 12KB, default Rx allocation */
 #define E1000_PBA_16K 0x0010    /* 16KB, default TX allocation */
 #define E1000_PBA_22K 0x0016
 #define E1000_PBA_24K 0x0018
 #define E1000_PBA_30K 0x001E
 #define E1000_PBA_32K 0x0020
+#define E1000_PBA_34K 0x0022
 #define E1000_PBA_38K 0x0026
 #define E1000_PBA_40K 0x0028
 #define E1000_PBA_48K 0x0030    /* 48KB, default RX allocation */
+#define E1000_PBS_16K E1000_PBA_16K
 /* Flow Control Constants */
 #define FLOW_CONTROL_ADDRESS_LOW  0x00C28001
 #define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
@@ -2336,7 +2496,7 @@ struct e1000_host_command_info {
 /* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
 #define AUTO_READ_DONE_TIMEOUT      10
 /* Number of milliseconds we wait for PHY configuration done after MAC reset */
-#define PHY_CFG_TIMEOUT             40
+#define PHY_CFG_TIMEOUT             100
 #define E1000_TX_BUFFER_SIZE ((uint32_t)1514)
@@ -2764,6 +2924,17 @@ struct e1000_host_command_info {
 #define M88E1000_EPSCR_TX_CLK_25      0x0070 /* 25  MHz TX_CLK */
 #define M88E1000_EPSCR_TX_CLK_0       0x0000 /* NO  TX_CLK */
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK  0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X    0x0000
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X    0x0200
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X    0x0400
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X    0x0600
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X    0x0800
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X    0x0A00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X    0x0C00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X    0x0E00
 /* IGP01E1000 Specific Port Config Register - R/W */
 #define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT  0x0010
 #define IGP01E1000_PSCFR_PRE_EN                0x0020
@@ -2990,6 +3161,221 @@ struct e1000_host_command_info {
 #define L1LXT971A_PHY_ID   0x001378E0
 #define GG82563_E_PHY_ID   0x01410CA0
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define PHY_PAGE_SHIFT        5
+#define PHY_REG(page, reg)    \
+        (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+#define IGP3_PHY_PORT_CTRL           \
+        PHY_REG(769, 17) /* Port General Configuration */
+#define IGP3_PHY_RATE_ADAPT_CTRL \
+        PHY_REG(769, 25) /* Rate Adapter Control Register */
+#define IGP3_KMRN_FIFO_CTRL_STATS \
+        PHY_REG(770, 16) /* KMRN FIFO's control/status register */
+#define IGP3_KMRN_POWER_MNG_CTRL \
+        PHY_REG(770, 17) /* KMRN Power Management Control Register */
+#define IGP3_KMRN_INBAND_CTRL \
+        PHY_REG(770, 18) /* KMRN Inband Control Register */
+#define IGP3_KMRN_DIAG \
+        PHY_REG(770, 19) /* KMRN Diagnostic register */
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
+#define IGP3_KMRN_ACK_TIMEOUT \
+        PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
+#define IGP3_VR_CTRL \
+        PHY_REG(776, 18) /* Voltage regulator control register */
+#define IGP3_VR_CTRL_MODE_SHUT       0x0200 /* Enter powerdown, shutdown VRs */
+#define IGP3_CAPABILITY \
+        PHY_REG(776, 19) /* IGP3 Capability Register */
+/* Capabilities for SKU Control  */
+#define IGP3_CAP_INITIATE_TEAM       0x0001 /* Able to initiate a team */
+#define IGP3_CAP_WFM                 0x0002 /* Support WoL and PXE */
+#define IGP3_CAP_ASF                 0x0004 /* Support ASF */
+#define IGP3_CAP_LPLU                0x0008 /* Support Low Power Link Up */
+#define IGP3_CAP_DC_AUTO_SPEED       0x0010 /* Support AC/DC Auto Link Speed */
+#define IGP3_CAP_SPD                 0x0020 /* Support Smart Power Down */
+#define IGP3_CAP_MULT_QUEUE          0x0040 /* Support 2 tx & 2 rx queues */
+#define IGP3_CAP_RSS                 0x0080 /* Support RSS */
+#define IGP3_CAP_8021PQ              0x0100 /* Support 802.1Q & 802.1p */
+#define IGP3_CAP_AMT_CB              0x0200 /* Support active manageability and circuit breaker */
+#define IGP3_PPC_JORDAN_EN           0x0001
+#define IGP3_PPC_JORDAN_GIGA_SPEED   0x0002
+#define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS         0x0001
+#define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK   0x001E
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA        0x0020
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_100         0x0040
+#define IGP3E1000_PHY_MISC_CTRL                0x1B   /* Misc. Ctrl register */
+#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET        0x1000 /* Duplex Manual Set */
+#define IGP3_KMRN_EXT_CTRL  PHY_REG(770, 18)
+#define IGP3_KMRN_EC_DIS_INBAND    0x0080
+#define IGP03E1000_E_PHY_ID  0x02A80390
+#define IFE_E_PHY_ID         0x02A80330 /* 10/100 PHY */
+#define IFE_PLUS_E_PHY_ID    0x02A80320
+#define IFE_C_E_PHY_ID       0x02A80310
+#define IFE_PHY_EXTENDED_STATUS_CONTROL   0x10  /* 100BaseTx Extended Status, Control and Address */
+#define IFE_PHY_SPECIAL_CONTROL           0x11  /* 100BaseTx PHY special control register */
+#define IFE_PHY_RCV_FALSE_CARRIER         0x13  /* 100BaseTx Receive False Carrier Counter */
+#define IFE_PHY_RCV_DISCONNECT            0x14  /* 100BaseTx Receive Disconnet Counter */
+#define IFE_PHY_RCV_ERROT_FRAME           0x15  /* 100BaseTx Receive Error Frame Counter */
+#define IFE_PHY_RCV_SYMBOL_ERR            0x16  /* Receive Symbol Error Counter */
+#define IFE_PHY_PREM_EOF_ERR              0x17  /* 100BaseTx Receive Premature End Of Frame Error Counter */
+#define IFE_PHY_RCV_EOF_ERR               0x18  /* 10BaseT Receive End Of Frame Error Counter */
+#define IFE_PHY_TX_JABBER_DETECT          0x19  /* 10BaseT Transmit Jabber Detect Counter */
+#define IFE_PHY_EQUALIZER                 0x1A  /* PHY Equalizer Control and Status */
+#define IFE_PHY_SPECIAL_CONTROL_LED       0x1B  /* PHY special control and LED configuration */
+#define IFE_PHY_MDIX_CONTROL              0x1C  /* MDI/MDI-X Control register */
+#define IFE_PHY_HWI_CONTROL               0x1D  /* Hardware Integrity Control (HWI) */
+#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE  0x2000  /* Defaut 1 = Disable auto reduced power down */
+#define IFE_PESC_100BTX_POWER_DOWN           0x0400  /* Indicates the power state of 100BASE-TX */
+#define IFE_PESC_10BTX_POWER_DOWN            0x0200  /* Indicates the power state of 10BASE-T */
+#define IFE_PESC_POLARITY_REVERSED           0x0100  /* Indicates 10BASE-T polarity */
+#define IFE_PESC_PHY_ADDR_MASK               0x007C  /* Bit 6:2 for sampled PHY address */
+#define IFE_PESC_SPEED                       0x0002  /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
+#define IFE_PESC_DUPLEX                      0x0001  /* Auto-negotiation duplex result 1=Full, 0=Half */
+#define IFE_PESC_POLARITY_REVERSED_SHIFT     8
+#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN   0x0100  /* 1 = Dyanmic Power Down disabled */
+#define IFE_PSC_FORCE_POLARITY               0x0020  /* 1=Reversed Polarity, 0=Normal */
+#define IFE_PSC_AUTO_POLARITY_DISABLE        0x0010  /* 1=Auto Polarity Disabled, 0=Enabled */
+#define IFE_PSC_JABBER_FUNC_DISABLE          0x0001  /* 1=Jabber Disabled, 0=Normal Jabber Operation */
+#define IFE_PSC_FORCE_POLARITY_SHIFT         5
+#define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT  4
+#define IFE_PMC_AUTO_MDIX                    0x0080  /* 1=enable MDI/MDI-X feature, default 0=disabled */
+#define IFE_PMC_FORCE_MDIX                   0x0040  /* 1=force MDIX-X, 0=force MDI */
+#define IFE_PMC_MDIX_STATUS                  0x0020  /* 1=MDI-X, 0=MDI */
+#define IFE_PMC_AUTO_MDIX_COMPLETE           0x0010  /* Resolution algorthm is completed */
+#define IFE_PMC_MDIX_MODE_SHIFT              6
+#define IFE_PHC_MDIX_RESET_ALL_MASK          0x0000  /* Disable auto MDI-X */
+#define IFE_PHC_HWI_ENABLE                   0x8000  /* Enable the HWI feature */
+#define IFE_PHC_ABILITY_CHECK                0x4000  /* 1= Test Passed, 0=failed */
+#define IFE_PHC_TEST_EXEC                    0x2000  /* PHY launch test pulses on the wire */
+#define IFE_PHC_HIGHZ                        0x0200  /* 1 = Open Circuit */
+#define IFE_PHC_LOWZ                         0x0400  /* 1 = Short Circuit */
+#define IFE_PHC_LOW_HIGH_Z_MASK              0x0600  /* Mask for indication type of problem on the line */
+#define IFE_PHC_DISTANCE_MASK                0x01FF  /* Mask for distance to the cable problem, in 80cm granularity */
+#define IFE_PHC_RESET_ALL_MASK               0x0000  /* Disable HWI */
+#define IFE_PSCL_PROBE_MODE                  0x0020  /* LED Probe mode */
+#define IFE_PSCL_PROBE_LEDS_OFF              0x0006  /* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON               0x0007  /* Force LEDs 0 and 2 on */
+#define ICH8_FLASH_COMMAND_TIMEOUT           500   /* 500 ms , should be adjusted */
+#define ICH8_FLASH_CYCLE_REPEAT_COUNT        10    /* 10 cycles , should be adjusted */
+#define ICH8_FLASH_SEG_SIZE_256              256
+#define ICH8_FLASH_SEG_SIZE_4K               4096
+#define ICH8_FLASH_SEG_SIZE_64K              65536
+#define ICH8_CYCLE_READ                      0x0
+#define ICH8_CYCLE_RESERVED                  0x1
+#define ICH8_CYCLE_WRITE                     0x2
+#define ICH8_CYCLE_ERASE                     0x3
+#define ICH8_FLASH_GFPREG   0x0000
+#define ICH8_FLASH_HSFSTS   0x0004
+#define ICH8_FLASH_HSFCTL   0x0006
+#define ICH8_FLASH_FADDR    0x0008
+#define ICH8_FLASH_FDATA0   0x0010
+#define ICH8_FLASH_FRACC    0x0050
+#define ICH8_FLASH_FREG0    0x0054
+#define ICH8_FLASH_FREG1    0x0058
+#define ICH8_FLASH_FREG2    0x005C
+#define ICH8_FLASH_FREG3    0x0060
+#define ICH8_FLASH_FPR0     0x0074
+#define ICH8_FLASH_FPR1     0x0078
+#define ICH8_FLASH_SSFSTS   0x0090
+#define ICH8_FLASH_SSFCTL   0x0092
+#define ICH8_FLASH_PREOP    0x0094
+#define ICH8_FLASH_OPTYPE   0x0096
+#define ICH8_FLASH_OPMENU   0x0098
+#define ICH8_FLASH_REG_MAPSIZE      0x00A0
+#define ICH8_FLASH_SECTOR_SIZE      4096
+#define ICH8_GFPREG_BASE_MASK       0x1FFF
+#define ICH8_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
+/* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
+/* Offset 04h HSFSTS */
+union ich8_hws_flash_status {
+    struct ich8_hsfsts {
+#ifdef E1000_BIG_ENDIAN
+        uint16_t reserved2      :6;
+        uint16_t fldesvalid     :1;
+        uint16_t flockdn        :1;
+        uint16_t flcdone        :1;
+        uint16_t flcerr         :1;
+        uint16_t dael           :1;
+        uint16_t berasesz       :2;
+        uint16_t flcinprog      :1;
+        uint16_t reserved1      :2;
+#else
+        uint16_t flcdone        :1;   /* bit 0 Flash Cycle Done */
+        uint16_t flcerr         :1;   /* bit 1 Flash Cycle Error */
+        uint16_t dael           :1;   /* bit 2 Direct Access error Log */
+        uint16_t berasesz       :2;   /* bit 4:3 Block/Sector Erase Size */
+        uint16_t flcinprog      :1;   /* bit 5 flash SPI cycle in Progress */
+        uint16_t reserved1      :2;   /* bit 13:6 Reserved */
+        uint16_t reserved2      :6;   /* bit 13:6 Reserved */
+        uint16_t fldesvalid     :1;   /* bit 14 Flash Descriptor Valid */
+        uint16_t flockdn        :1;   /* bit 15 Flash Configuration Lock-Down */
+#endif
+    } hsf_status;
+    uint16_t regval;
+};
+/* ICH8 GbE Flash Hardware Sequencing Flash control Register bit breakdown */
+/* Offset 06h FLCTL */
+union ich8_hws_flash_ctrl {
+    struct ich8_hsflctl {
+#ifdef E1000_BIG_ENDIAN
+        uint16_t fldbcount      :2;
+        uint16_t flockdn        :6;
+        uint16_t flcgo          :1;
+        uint16_t flcycle        :2;
+        uint16_t reserved       :5;
+#else
+        uint16_t flcgo          :1;   /* 0 Flash Cycle Go */
+        uint16_t flcycle        :2;   /* 2:1 Flash Cycle */
+        uint16_t reserved       :5;   /* 7:3 Reserved  */
+        uint16_t fldbcount      :2;   /* 9:8 Flash Data Byte Count */
+        uint16_t flockdn        :6;   /* 15:10 Reserved */
+#endif
+    } hsf_ctrl;
+    uint16_t regval;
+};
+/* ICH8 Flash Region Access Permissions */
+union ich8_hws_flash_regacc {
+    struct ich8_flracc {
+#ifdef E1000_BIG_ENDIAN
+        uint32_t gmwag          :8;
+        uint32_t gmrag          :8;
+        uint32_t grwa           :8;
+        uint32_t grra           :8;
+#else
+        uint32_t grra           :8;   /* 0:7 GbE region Read Access */
+        uint32_t grwa           :8;   /* 8:15 GbE region Write Access */
+        uint32_t gmrag          :8;   /* 23:16 GbE Master Read Access Grant  */
+        uint32_t gmwag          :8;   /* 31:24 GbE Master Write Access Grant */
+#endif
+    } hsf_flregacc;
+    uint16_t regval;
+};
 /* Miscellaneous PHY bit definitions. */
 #define PHY_PREAMBLE        0xFFFFFFFF
 #define PHY_SOF             0x01
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index f77624f5f17b..da62db897426 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -36,7 +36,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
 #else
 #define DRIVERNAPI "-NAPI"
 #endif
-#define DRV_VERSION "7.0.38-k4"DRIVERNAPI
+#define DRV_VERSION "7.1.9-k4"DRIVERNAPI
 char e1000_driver_version[] = DRV_VERSION;
 static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
@@ -73,6 +73,11 @@ static struct pci_device_id e1000_pci_tbl[] = {
        INTEL_E1000_ETHERNET_DEVICE(0x1026),
        INTEL_E1000_ETHERNET_DEVICE(0x1027),
        INTEL_E1000_ETHERNET_DEVICE(0x1028),
+        INTEL_E1000_ETHERNET_DEVICE(0x1049),
+        INTEL_E1000_ETHERNET_DEVICE(0x104A),
+        INTEL_E1000_ETHERNET_DEVICE(0x104B),
+        INTEL_E1000_ETHERNET_DEVICE(0x104C),
+        INTEL_E1000_ETHERNET_DEVICE(0x104D),
        INTEL_E1000_ETHERNET_DEVICE(0x105E),
        INTEL_E1000_ETHERNET_DEVICE(0x105F),
        INTEL_E1000_ETHERNET_DEVICE(0x1060),
@@ -96,6 +101,8 @@ static struct pci_device_id e1000_pci_tbl[] = {
        INTEL_E1000_ETHERNET_DEVICE(0x109A),
        INTEL_E1000_ETHERNET_DEVICE(0x10B5),
        INTEL_E1000_ETHERNET_DEVICE(0x10B9),
+        INTEL_E1000_ETHERNET_DEVICE(0x10BA),
+        INTEL_E1000_ETHERNET_DEVICE(0x10BB),
        /* required last entry */
        {0,}
 };
@@ -133,7 +140,6 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
 static void e1000_set_multi(struct net_device *netdev);
 static void e1000_update_phy_info(unsigned long data);
 static void e1000_watchdog(unsigned long data);
-static void e1000_watchdog_task(struct e1000_adapter *adapter);
 static void e1000_82547_tx_fifo_stall(unsigned long data);
 static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
 static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
@@ -178,8 +184,8 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
 static void e1000_restore_vlan(struct e1000_adapter *adapter);
-#ifdef CONFIG_PM
 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
+#ifdef CONFIG_PM
 static int e1000_resume(struct pci_dev *pdev);
 #endif
 static void e1000_shutdown(struct pci_dev *pdev);
@@ -206,8 +212,8 @@ static struct pci_driver e1000_driver = {
        .probe    = e1000_probe,
        .remove   = __devexit_p(e1000_remove),
        /* Power Managment Hooks */
-#ifdef CONFIG_PM
        .suspend  = e1000_suspend,
+#ifdef CONFIG_PM
        .resume   = e1000_resume,
 #endif
        .shutdown = e1000_shutdown,
@@ -261,6 +267,44 @@ e1000_exit_module(void)
 module_exit(e1000_exit_module);
+static int e1000_request_irq(struct e1000_adapter *adapter)
+{
+        struct net_device *netdev = adapter->netdev;
+        int flags, err = 0;
+        flags = IRQF_SHARED;
+#ifdef CONFIG_PCI_MSI
+        if (adapter->hw.mac_type > e1000_82547_rev_2) {
+                adapter->have_msi = TRUE;
+                if ((err = pci_enable_msi(adapter->pdev))) {
+                        DPRINTK(PROBE, ERR,
+                         "Unable to allocate MSI interrupt Error: %d\n", err);
+                        adapter->have_msi = FALSE;
+                }
+        }
+        if (adapter->have_msi)
+                flags &= ~IRQF_SHARED;
+#endif
+        if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
+                               netdev->name, netdev)))
+                DPRINTK(PROBE, ERR,
+                        "Unable to allocate interrupt Error: %d\n", err);
+        return err;
+}
+static void e1000_free_irq(struct e1000_adapter *adapter)
+{
+        struct net_device *netdev = adapter->netdev;
+        free_irq(adapter->pdev->irq, netdev);
+#ifdef CONFIG_PCI_MSI
+        if (adapter->have_msi)
+                pci_disable_msi(adapter->pdev);
+#endif
+}
 /**
 * e1000_irq_disable - Mask off interrupt generation on the NIC
 * @adapter: board private structure
@@ -329,6 +373,7 @@ e1000_release_hw_control(struct e1000_adapter *adapter)
 {
        uint32_t ctrl_ext;
        uint32_t swsm;
+        uint32_t extcnf;
        /* Let firmware taken over control of h/w */
        switch (adapter->hw.mac_type) {
@@ -343,6 +388,11 @@ e1000_release_hw_control(struct e1000_adapter *adapter)
                swsm = E1000_READ_REG(&adapter->hw, SWSM);
                E1000_WRITE_REG(&adapter->hw, SWSM,
                                swsm & ~E1000_SWSM_DRV_LOAD);
+        case e1000_ich8lan:
+                extcnf = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+                E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+                                extcnf & ~E1000_CTRL_EXT_DRV_LOAD);
+                break;
        default:
                break;
        }
@@ -364,6 +414,7 @@ e1000_get_hw_control(struct e1000_adapter *adapter)
 {
        uint32_t ctrl_ext;
        uint32_t swsm;
+        uint32_t extcnf;
        /* Let firmware know the driver has taken over */
        switch (adapter->hw.mac_type) {
        case e1000_82571:
@@ -378,6 +429,11 @@ e1000_get_hw_control(struct e1000_adapter *adapter)
                E1000_WRITE_REG(&adapter->hw, SWSM,
                                swsm | E1000_SWSM_DRV_LOAD);
                break;
+        case e1000_ich8lan:
+                extcnf = E1000_READ_REG(&adapter->hw, EXTCNF_CTRL);
+                E1000_WRITE_REG(&adapter->hw, EXTCNF_CTRL,
+                                extcnf | E1000_EXTCNF_CTRL_SWFLAG);
+                break;
        default:
                break;
        }
@@ -387,18 +443,10 @@ int
 e1000_up(struct e1000_adapter *adapter)
 {
        struct net_device *netdev = adapter->netdev;
-        int i, err;
+        int i;
        /* hardware has been reset, we need to reload some things */
-        /* Reset the PHY if it was previously powered down */
-        if (adapter->hw.media_type == e1000_media_type_copper) {
-                uint16_t mii_reg;
-                e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
-                if (mii_reg & MII_CR_POWER_DOWN)
-                        e1000_phy_hw_reset(&adapter->hw);
-        }
        e1000_set_multi(netdev);
        e1000_restore_vlan(adapter);
@@ -415,24 +463,6 @@ e1000_up(struct e1000_adapter *adapter)
                                      E1000_DESC_UNUSED(ring));
        }
-#ifdef CONFIG_PCI_MSI
-        if (adapter->hw.mac_type > e1000_82547_rev_2) {
-                adapter->have_msi = TRUE;
-                if ((err = pci_enable_msi(adapter->pdev))) {
-                        DPRINTK(PROBE, ERR,
-                         "Unable to allocate MSI interrupt Error: %d\n", err);
-                        adapter->have_msi = FALSE;
-                }
-        }
-#endif
-        if ((err = request_irq(adapter->pdev->irq, &e1000_intr,
-                              IRQF_SHARED | IRQF_SAMPLE_RANDOM,
-                              netdev->name, netdev))) {
-                DPRINTK(PROBE, ERR,
-                    "Unable to allocate interrupt Error: %d\n", err);
-                return err;
-        }
        adapter->tx_queue_len = netdev->tx_queue_len;
        mod_timer(&adapter->watchdog_timer, jiffies);
@@ -445,21 +475,60 @@ e1000_up(struct e1000_adapter *adapter)
        return 0;
 }
+/**
+ * e1000_power_up_phy - restore link in case the phy was powered down
+ * @adapter: address of board private structure
+ *
+ * The phy may be powered down to save power and turn off link when the
+ * driver is unloaded and wake on lan is not enabled (among others)
+ * *** this routine MUST be followed by a call to e1000_reset ***
+ *
+ **/
+static void e1000_power_up_phy(struct e1000_adapter *adapter)
+{
+        uint16_t mii_reg = 0;
+        /* Just clear the power down bit to wake the phy back up */
+        if (adapter->hw.media_type == e1000_media_type_copper) {
+                /* according to the manual, the phy will retain its
+                 * settings across a power-down/up cycle */
+                e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
+                mii_reg &= ~MII_CR_POWER_DOWN;
+                e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
+        }
+}
+static void e1000_power_down_phy(struct e1000_adapter *adapter)
+{
+        boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) &&
+                                      e1000_check_mng_mode(&adapter->hw);
+        /* Power down the PHY so no link is implied when interface is down
+         * The PHY cannot be powered down if any of the following is TRUE
+         * (a) WoL is enabled
+         * (b) AMT is active
+         * (c) SoL/IDER session is active */
+        if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
+            adapter->hw.mac_type != e1000_ich8lan &&
+            adapter->hw.media_type == e1000_media_type_copper &&
+            !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) &&
+            !mng_mode_enabled &&
+            !e1000_check_phy_reset_block(&adapter->hw)) {
+                uint16_t mii_reg = 0;
+                e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
+                mii_reg |= MII_CR_POWER_DOWN;
+                e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
+                mdelay(1);
+        }
+}
 void
 e1000_down(struct e1000_adapter *adapter)
 {
        struct net_device *netdev = adapter->netdev;
-        boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) &&
-                                     e1000_check_mng_mode(&adapter->hw);
        e1000_irq_disable(adapter);
-        free_irq(adapter->pdev->irq, netdev);
-#ifdef CONFIG_PCI_MSI
-        if (adapter->hw.mac_type > e1000_82547_rev_2 &&
-           adapter->have_msi == TRUE)
-                pci_disable_msi(adapter->pdev);
-#endif
        del_timer_sync(&adapter->tx_fifo_stall_timer);
        del_timer_sync(&adapter->watchdog_timer);
        del_timer_sync(&adapter->phy_info_timer);
@@ -476,23 +545,17 @@ e1000_down(struct e1000_adapter *adapter)
        e1000_reset(adapter);
        e1000_clean_all_tx_rings(adapter);
        e1000_clean_all_rx_rings(adapter);
+}
-        /* Power down the PHY so no link is implied when interface is down *
+void
-         * The PHY cannot be powered down if any of the following is TRUE *
+e1000_reinit_locked(struct e1000_adapter *adapter)
-         * (a) WoL is enabled
+{
-         * (b) AMT is active
+        WARN_ON(in_interrupt());
-         * (c) SoL/IDER session is active */
+        while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
-        if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
+                msleep(1);
-           adapter->hw.media_type == e1000_media_type_copper &&
+        e1000_down(adapter);
-           !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) &&
+        e1000_up(adapter);
-           !mng_mode_enabled &&
+        clear_bit(__E1000_RESETTING, &adapter->flags);
-           !e1000_check_phy_reset_block(&adapter->hw)) {
-                uint16_t mii_reg;
-                e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
-                mii_reg |= MII_CR_POWER_DOWN;
-                e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
-                mdelay(1);
-        }
 }
 void
@@ -518,6 +581,9 @@ e1000_reset(struct e1000_adapter *adapter)
        case e1000_82573:
                pba = E1000_PBA_12K;
                break;
+        case e1000_ich8lan:
+                pba = E1000_PBA_8K;
+                break;
        default:
                pba = E1000_PBA_48K;
                break;
@@ -542,6 +608,12 @@ e1000_reset(struct e1000_adapter *adapter)
        /* Set the FC high water mark to 90% of the FIFO size.
         * Required to clear last 3 LSB */
        fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
+        /* We can't use 90% on small FIFOs because the remainder
+         * would be less than 1 full frame.  In this case, we size
+         * it to allow at least a full frame above the high water
+         *  mark. */
+        if (pba < E1000_PBA_16K)
+                fc_high_water_mark = (pba * 1024) - 1600;
        adapter->hw.fc_high_water = fc_high_water_mark;
        adapter->hw.fc_low_water = fc_high_water_mark - 8;
@@ -564,6 +636,23 @@ e1000_reset(struct e1000_adapter *adapter)
        e1000_reset_adaptive(&adapter->hw);
        e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
+        if (!adapter->smart_power_down &&
+            (adapter->hw.mac_type == e1000_82571 ||
+             adapter->hw.mac_type == e1000_82572)) {
+                uint16_t phy_data = 0;
+                /* speed up time to link by disabling smart power down, ignore
+                 * the return value of this function because there is nothing
+                 * different we would do if it failed */
+                e1000_read_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
+                                   &phy_data);
+                phy_data &= ~IGP02E1000_PM_SPD;
+                e1000_write_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
+                                    phy_data);
+        }
+        if (adapter->hw.mac_type < e1000_ich8lan)
+        /* FIXME: this code is duplicate and wrong for PCI Express */
        if (adapter->en_mng_pt) {
                manc = E1000_READ_REG(&adapter->hw, MANC);
                manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
@@ -590,6 +679,7 @@ e1000_probe(struct pci_dev *pdev,
        struct net_device *netdev;
        struct e1000_adapter *adapter;
        unsigned long mmio_start, mmio_len;
+        unsigned long flash_start, flash_len;
        static int cards_found = 0;
        static int e1000_ksp3_port_a = 0; /* global ksp3 port a indication */
@@ -599,10 +689,12 @@ e1000_probe(struct pci_dev *pdev,
        if ((err = pci_enable_device(pdev)))
                return err;
-        if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
+        if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
+            !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) {
                pci_using_dac = 1;
        } else {
-                if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
+                if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) &&
+                    (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
                        E1000_ERR("No usable DMA configuration, aborting\n");
                        return err;
                }
@@ -682,6 +774,19 @@ e1000_probe(struct pci_dev *pdev,
        if ((err = e1000_sw_init(adapter)))
                goto err_sw_init;
+        /* Flash BAR mapping must happen after e1000_sw_init
+         * because it depends on mac_type */
+        if ((adapter->hw.mac_type == e1000_ich8lan) &&
+           (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
+                flash_start = pci_resource_start(pdev, 1);
+                flash_len = pci_resource_len(pdev, 1);
+                adapter->hw.flash_address = ioremap(flash_start, flash_len);
+                if (!adapter->hw.flash_address) {
+                        err = -EIO;
+                        goto err_flashmap;
+                }
+        }
        if ((err = e1000_check_phy_reset_block(&adapter->hw)))
                DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
@@ -700,6 +805,8 @@ e1000_probe(struct pci_dev *pdev,
                                   NETIF_F_HW_VLAN_TX |
                                   NETIF_F_HW_VLAN_RX |
                                   NETIF_F_HW_VLAN_FILTER;
+                if (adapter->hw.mac_type == e1000_ich8lan)
+                        netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
        }
 #ifdef NETIF_F_TSO
@@ -715,11 +822,17 @@ e1000_probe(struct pci_dev *pdev,
        if (pci_using_dac)
                netdev->features |= NETIF_F_HIGHDMA;
-        /* hard_start_xmit is safe against parallel locking */
        netdev->features |= NETIF_F_LLTX;
        adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
+        /* initialize eeprom parameters */
+        if (e1000_init_eeprom_params(&adapter->hw)) {
+                E1000_ERR("EEPROM initialization failed\n");
+                return -EIO;
+        }
        /* before reading the EEPROM, reset the controller to
         * put the device in a known good starting state */
@@ -758,9 +871,6 @@ e1000_probe(struct pci_dev *pdev,
        adapter->watchdog_timer.function = &e1000_watchdog;
        adapter->watchdog_timer.data = (unsigned long) adapter;
-        INIT_WORK(&adapter->watchdog_task,
-                (void (*)(void *))e1000_watchdog_task, adapter);
        init_timer(&adapter->phy_info_timer);
        adapter->phy_info_timer.function = &e1000_update_phy_info;
        adapter->phy_info_timer.data = (unsigned long) adapter;
@@ -790,6 +900,11 @@ e1000_probe(struct pci_dev *pdev,
                        EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
                eeprom_apme_mask = E1000_EEPROM_82544_APM;
                break;
+        case e1000_ich8lan:
+                e1000_read_eeprom(&adapter->hw,
+                        EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
+                eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
+                break;
        case e1000_82546:
        case e1000_82546_rev_3:
        case e1000_82571:
@@ -849,6 +964,9 @@ e1000_probe(struct pci_dev *pdev,
        return 0;
 err_register:
+        if (adapter->hw.flash_address)
+                iounmap(adapter->hw.flash_address);
+err_flashmap:
 err_sw_init:
 err_eeprom:
        iounmap(adapter->hw.hw_addr);
@@ -882,6 +1000,7 @@ e1000_remove(struct pci_dev *pdev)
        flush_scheduled_work();
        if (adapter->hw.mac_type >= e1000_82540 &&
+           adapter->hw.mac_type != e1000_ich8lan &&
           adapter->hw.media_type == e1000_media_type_copper) {
                manc = E1000_READ_REG(&adapter->hw, MANC);
                if (manc & E1000_MANC_SMBUS_EN) {
@@ -910,6 +1029,8 @@ e1000_remove(struct pci_dev *pdev)
 #endif
        iounmap(adapter->hw.hw_addr);
+        if (adapter->hw.flash_address)
+                iounmap(adapter->hw.flash_address);
        pci_release_regions(pdev);
        free_netdev(netdev);
@@ -947,7 +1068,7 @@ e1000_sw_init(struct e1000_adapter *adapter)
        pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
-        adapter->rx_buffer_len = MAXIMUM_ETHERNET_FRAME_SIZE;
+        adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
        adapter->rx_ps_bsize0 = E1000_RXBUFFER_128;
        hw->max_frame_size = netdev->mtu +
                             ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
@@ -960,13 +1081,6 @@ e1000_sw_init(struct e1000_adapter *adapter)
                return -EIO;
        }
-        /* initialize eeprom parameters */
-        if (e1000_init_eeprom_params(hw)) {
-                E1000_ERR("EEPROM initialization failed\n");
-                return -EIO;
-        }
        switch (hw->mac_type) {
        default:
                break;
@@ -1078,6 +1192,10 @@ e1000_open(struct net_device *netdev)
        struct e1000_adapter *adapter = netdev_priv(netdev);
        int err;
+        /* disallow open during test */
+        if (test_bit(__E1000_DRIVER_TESTING, &adapter->flags))
+                return -EBUSY;
        /* allocate transmit descriptors */
        if ((err = e1000_setup_all_tx_resources(adapter)))
@@ -1088,6 +1206,12 @@ e1000_open(struct net_device *netdev)
        if ((err = e1000_setup_all_rx_resources(adapter)))
                goto err_setup_rx;
+        err = e1000_request_irq(adapter);
+        if (err)
+                goto err_up;
+        e1000_power_up_phy(adapter);
        if ((err = e1000_up(adapter)))
                goto err_up;
        adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
@@ -1131,7 +1255,10 @@ e1000_close(struct net_device *netdev)
 {
        struct e1000_adapter *adapter = netdev_priv(netdev);
+        WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
        e1000_down(adapter);
+        e1000_power_down_phy(adapter);
+        e1000_free_irq(adapter);
        e1000_free_all_tx_resources(adapter);
        e1000_free_all_rx_resources(adapter);
@@ -1189,8 +1316,7 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter,
        int size;
        size = sizeof(struct e1000_buffer) * txdr->count;
+        txdr->buffer_info = vmalloc(size);
-        txdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
        if (!txdr->buffer_info) {
                DPRINTK(PROBE, ERR,
                "Unable to allocate memory for the transmit descriptor ring\n");
@@ -1302,11 +1428,11 @@ e1000_configure_tx(struct e1000_adapter *adapter)
                tdba = adapter->tx_ring[0].dma;
                tdlen = adapter->tx_ring[0].count *
                        sizeof(struct e1000_tx_desc);
-                E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
-                E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
                E1000_WRITE_REG(hw, TDLEN, tdlen);
-                E1000_WRITE_REG(hw, TDH, 0);
+                E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
+                E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
                E1000_WRITE_REG(hw, TDT, 0);
+                E1000_WRITE_REG(hw, TDH, 0);
                adapter->tx_ring[0].tdh = E1000_TDH;
                adapter->tx_ring[0].tdt = E1000_TDT;
                break;
@@ -1418,7 +1544,7 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter,
        int size, desc_len;
        size = sizeof(struct e1000_buffer) * rxdr->count;
-        rxdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
+        rxdr->buffer_info = vmalloc(size);
        if (!rxdr->buffer_info) {
                DPRINTK(PROBE, ERR,
                "Unable to allocate memory for the receive descriptor ring\n");
@@ -1560,9 +1686,6 @@ e1000_setup_rctl(struct e1000_adapter *adapter)
                E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
                (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
-        if (adapter->hw.mac_type > e1000_82543)
-                rctl |= E1000_RCTL_SECRC;
        if (adapter->hw.tbi_compatibility_on == 1)
                rctl |= E1000_RCTL_SBP;
        else
@@ -1628,7 +1751,7 @@ e1000_setup_rctl(struct e1000_adapter *adapter)
                rfctl |= E1000_RFCTL_IPV6_DIS;
                E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
-                rctl |= E1000_RCTL_DTYP_PS | E1000_RCTL_SECRC;
+                rctl |= E1000_RCTL_DTYP_PS;
                psrctl |= adapter->rx_ps_bsize0 >>
                        E1000_PSRCTL_BSIZE0_SHIFT;
@@ -1712,11 +1835,11 @@ e1000_configure_rx(struct e1000_adapter *adapter)
        case 1:
        default:
                rdba = adapter->rx_ring[0].dma;
-                E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
-                E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
                E1000_WRITE_REG(hw, RDLEN, rdlen);
-                E1000_WRITE_REG(hw, RDH, 0);
+                E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
+                E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
                E1000_WRITE_REG(hw, RDT, 0);
+                E1000_WRITE_REG(hw, RDH, 0);
                adapter->rx_ring[0].rdh = E1000_RDH;
                adapter->rx_ring[0].rdt = E1000_RDT;
                break;
@@ -1741,9 +1864,6 @@ e1000_configure_rx(struct e1000_adapter *adapter)
                E1000_WRITE_REG(hw, RXCSUM, rxcsum);
        }
-        if (hw->mac_type == e1000_82573)
-                E1000_WRITE_REG(hw, ERT, 0x0100);
        /* Enable Receives */
        E1000_WRITE_REG(hw, RCTL, rctl);
 }
@@ -2083,6 +2203,12 @@ e1000_set_multi(struct net_device *netdev)
        uint32_t rctl;
        uint32_t hash_value;
        int i, rar_entries = E1000_RAR_ENTRIES;
+        int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
+                                E1000_NUM_MTA_REGISTERS_ICH8LAN :
+                                E1000_NUM_MTA_REGISTERS;
+        if (adapter->hw.mac_type == e1000_ich8lan)
+                rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
        /* reserve RAR[14] for LAA over-write work-around */
        if (adapter->hw.mac_type == e1000_82571)
@@ -2121,14 +2247,18 @@ e1000_set_multi(struct net_device *netdev)
                        mc_ptr = mc_ptr->next;
                } else {
                        E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
+                        E1000_WRITE_FLUSH(hw);
                        E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
+                        E1000_WRITE_FLUSH(hw);
                }
        }
        /* clear the old settings from the multicast hash table */
-        for (i = 0; i < E1000_NUM_MTA_REGISTERS; i++)
+        for (i = 0; i < mta_reg_count; i++) {
                E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+                E1000_WRITE_FLUSH(hw);
+        }
        /* load any remaining addresses into the hash table */
@@ -2201,19 +2331,19 @@ static void
 e1000_watchdog(unsigned long data)
 {
        struct e1000_adapter *adapter = (struct e1000_adapter *) data;
-        /* Do the rest outside of interrupt context */
-        schedule_work(&adapter->watchdog_task);
-}
-static void
-e1000_watchdog_task(struct e1000_adapter *adapter)
-{
        struct net_device *netdev = adapter->netdev;
        struct e1000_tx_ring *txdr = adapter->tx_ring;
        uint32_t link, tctl;
+        int32_t ret_val;
-        e1000_check_for_link(&adapter->hw);
+        ret_val = e1000_check_for_link(&adapter->hw);
+        if ((ret_val == E1000_ERR_PHY) &&
+            (adapter->hw.phy_type == e1000_phy_igp_3) &&
+            (E1000_READ_REG(&adapter->hw, CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+                /* See e1000_kumeran_lock_loss_workaround() */
+                DPRINTK(LINK, INFO,
+                        "Gigabit has been disabled, downgrading speed\n");
+        }
        if (adapter->hw.mac_type == e1000_82573) {
                e1000_enable_tx_pkt_filtering(&adapter->hw);
                if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
@@ -2394,7 +2524,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
        uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
        int err;
-        if (skb_shinfo(skb)->gso_size) {
+        if (skb_is_gso(skb)) {
                if (skb_header_cloned(skb)) {
                        err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
                        if (err)
@@ -2519,7 +2649,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
                 * tso gets written back prematurely before the data is fully
                 * DMA'd to the controller */
                if (!skb->data_len && tx_ring->last_tx_tso &&
-                    !skb_shinfo(skb)->gso_size) {
+                    !skb_is_gso(skb)) {
                        tx_ring->last_tx_tso = 0;
                        size -= 4;
                }
@@ -2779,9 +2909,10 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
                        case e1000_82571:
                        case e1000_82572:
                        case e1000_82573:
+                        case e1000_ich8lan:
                                pull_size = min((unsigned int)4, skb->data_len);
                                if (!__pskb_pull_tail(skb, pull_size)) {
-                                        printk(KERN_ERR
+                                        DPRINTK(DRV, ERR,
                                                "__pskb_pull_tail failed.\n");
                                        dev_kfree_skb_any(skb);
                                        return NETDEV_TX_OK;
@@ -2806,8 +2937,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 #ifdef NETIF_F_TSO
        /* Controller Erratum workaround */
-        if (!skb->data_len && tx_ring->last_tx_tso &&
+        if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
-            !skb_shinfo(skb)->gso_size)
                count++;
 #endif
@@ -2919,8 +3049,7 @@ e1000_reset_task(struct net_device *netdev)
 {
        struct e1000_adapter *adapter = netdev_priv(netdev);
-        e1000_down(adapter);
+        e1000_reinit_locked(adapter);
-        e1000_up(adapter);
 }
 /**
@@ -2964,6 +3093,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu)
        /* Adapter-specific max frame size limits. */
        switch (adapter->hw.mac_type) {
        case e1000_undefined ... e1000_82542_rev2_1:
+        case e1000_ich8lan:
                if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
                        DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
                        return -EINVAL;
@@ -3018,7 +3148,6 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu)
                adapter->rx_buffer_len = E1000_RXBUFFER_16384;
        /* adjust allocation if LPE protects us, and we aren't using SBP */
-#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
        if (!adapter->hw.tbi_compatibility_on &&
            ((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) ||
             (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
@@ -3026,10 +3155,8 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu)
        netdev->mtu = new_mtu;
-        if (netif_running(netdev)) {
+        if (netif_running(netdev))
-                e1000_down(adapter);
+                e1000_reinit_locked(adapter);
-                e1000_up(adapter);
-        }
        adapter->hw.max_frame_size = max_frame;
@@ -3074,12 +3201,15 @@ e1000_update_stats(struct e1000_adapter *adapter)
        adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
        adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
        adapter->stats.roc += E1000_READ_REG(hw, ROC);
+        if (adapter->hw.mac_type != e1000_ich8lan) {
        adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
        adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
        adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
        adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
        adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
        adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
+        }
        adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
        adapter->stats.mpc += E1000_READ_REG(hw, MPC);
@@ -3107,12 +3237,16 @@ e1000_update_stats(struct e1000_adapter *adapter)
        adapter->stats.totl += E1000_READ_REG(hw, TOTL);
        adapter->stats.toth += E1000_READ_REG(hw, TOTH);
        adapter->stats.tpr += E1000_READ_REG(hw, TPR);
+        if (adapter->hw.mac_type != e1000_ich8lan) {
        adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
        adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
        adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
        adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
        adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
        adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
+        }
        adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
        adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
@@ -3134,6 +3268,8 @@ e1000_update_stats(struct e1000_adapter *adapter)
        if (hw->mac_type > e1000_82547_rev_2) {
                adapter->stats.iac += E1000_READ_REG(hw, IAC);
                adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
+                if (adapter->hw.mac_type != e1000_ich8lan) {
                adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
                adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
                adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
@@ -3141,6 +3277,7 @@ e1000_update_stats(struct e1000_adapter *adapter)
                adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
                adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
                adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
+                }
        }
        /* Fill out the OS statistics structure */
@@ -3249,8 +3386,8 @@ e1000_intr(int irq, void *data, struct pt_regs *regs)
                E1000_WRITE_REG(hw, IMC, ~0);
                E1000_WRITE_FLUSH(hw);
        }
-        if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0])))
+        if (likely(netif_rx_schedule_prep(netdev)))
-                __netif_rx_schedule(&adapter->polling_netdev[0]);
+                __netif_rx_schedule(netdev);
        else
                e1000_irq_enable(adapter);
 #else
@@ -3293,34 +3430,26 @@ e1000_clean(struct net_device *poll_dev, int *budget)
 {
        struct e1000_adapter *adapter;
        int work_to_do = min(*budget, poll_dev->quota);
-        int tx_cleaned = 0, i = 0, work_done = 0;
+        int tx_cleaned = 0, work_done = 0;
        /* Must NOT use netdev_priv macro here. */
        adapter = poll_dev->priv;
        /* Keep link state information with original netdev */
-        if (!netif_carrier_ok(adapter->netdev))
+        if (!netif_carrier_ok(poll_dev))
                goto quit_polling;
-        while (poll_dev != &adapter->polling_netdev[i]) {
+        /* e1000_clean is called per-cpu.  This lock protects
-                i++;
+         * tx_ring[0] from being cleaned by multiple cpus
-                BUG_ON(i == adapter->num_rx_queues);
+         * simultaneously.  A failure obtaining the lock means
+         * tx_ring[0] is currently being cleaned anyway. */
+        if (spin_trylock(&adapter->tx_queue_lock)) {
+                tx_cleaned = e1000_clean_tx_irq(adapter,
+                                                &adapter->tx_ring[0]);
+                spin_unlock(&adapter->tx_queue_lock);
        }
-        if (likely(adapter->num_tx_queues == 1)) {
+        adapter->clean_rx(adapter, &adapter->rx_ring[0],
-                /* e1000_clean is called per-cpu.  This lock protects
-                 * tx_ring[0] from being cleaned by multiple cpus
-                 * simultaneously.  A failure obtaining the lock means
-                 * tx_ring[0] is currently being cleaned anyway. */
-                if (spin_trylock(&adapter->tx_queue_lock)) {
-                        tx_cleaned = e1000_clean_tx_irq(adapter,
-                                                        &adapter->tx_ring[0]);
-                        spin_unlock(&adapter->tx_queue_lock);
-                }
-        } else
-                tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[i]);
-        adapter->clean_rx(adapter, &adapter->rx_ring[i],
                          &work_done, work_to_do);
        *budget -= work_done;
@@ -3328,7 +3457,7 @@ e1000_clean(struct net_device *poll_dev, int *budget)
        /* If no Tx and not enough Rx work done, exit the polling mode */
        if ((!tx_cleaned && (work_done == 0)) ||
-           !netif_running(adapter->netdev)) {
+           !netif_running(poll_dev)) {
 quit_polling:
                netif_rx_complete(poll_dev);
                e1000_irq_enable(adapter);
@@ -3543,11 +3672,15 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
                length = le16_to_cpu(rx_desc->length);
+                /* adjust length to remove Ethernet CRC */
+                length -= 4;
                if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
                        /* All receives must fit into a single buffer */
                        E1000_DBG("%s: Receive packet consumed multiple"
                                  " buffers\n", netdev->name);
-                        dev_kfree_skb_irq(skb);
+                        /* recycle */
+                        buffer_info-> skb = skb;
                        goto next_desc;
                }
@@ -3675,7 +3808,6 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
        buffer_info = &rx_ring->buffer_info[i];
        while (staterr & E1000_RXD_STAT_DD) {
-                buffer_info = &rx_ring->buffer_info[i];
                ps_page = &rx_ring->ps_page[i];
                ps_page_dma = &rx_ring->ps_page_dma[i];
 #ifdef CONFIG_E1000_NAPI
@@ -3747,8 +3879,9 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
                        pci_dma_sync_single_for_device(pdev,
                                ps_page_dma->ps_page_dma[0],
                                PAGE_SIZE, PCI_DMA_FROMDEVICE);
+                        /* remove the CRC */
+                        l1 -= 4;
                        skb_put(skb, l1);
-                        length += l1;
                        goto copydone;
                } /* if */
                }
@@ -3767,6 +3900,10 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
                        skb->truesize += length;
                }
+                /* strip the ethernet crc, problem is we're using pages now so
+                 * this whole operation can get a little cpu intensive */
+                pskb_trim(skb, skb->len - 4);
 copydone:
                e1000_rx_checksum(adapter, staterr,
                                  le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
@@ -4180,10 +4317,9 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
                                                return retval;
                                        }
                                }
-                                if (netif_running(adapter->netdev)) {
+                                if (netif_running(adapter->netdev))
-                                        e1000_down(adapter);
+                                        e1000_reinit_locked(adapter);
-                                        e1000_up(adapter);
+                                else
-                                } else
                                        e1000_reset(adapter);
                                break;
                        case M88E1000_PHY_SPEC_CTRL:
@@ -4200,10 +4336,9 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
                        case PHY_CTRL:
                                if (mii_reg & MII_CR_POWER_DOWN)
                                        break;
-                                if (netif_running(adapter->netdev)) {
+                                if (netif_running(adapter->netdev))
-                                        e1000_down(adapter);
+                                        e1000_reinit_locked(adapter);
-                                        e1000_up(adapter);
+                                else
-                                } else
                                        e1000_reset(adapter);
                                break;
                        }
@@ -4277,18 +4412,21 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
                ctrl |= E1000_CTRL_VME;
                E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+                if (adapter->hw.mac_type != e1000_ich8lan) {
                /* enable VLAN receive filtering */
                rctl = E1000_READ_REG(&adapter->hw, RCTL);
                rctl |= E1000_RCTL_VFE;
                rctl &= ~E1000_RCTL_CFIEN;
                E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
                e1000_update_mng_vlan(adapter);
+                }
        } else {
                /* disable VLAN tag insert/strip */
                ctrl = E1000_READ_REG(&adapter->hw, CTRL);
                ctrl &= ~E1000_CTRL_VME;
                E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+                if (adapter->hw.mac_type != e1000_ich8lan) {
                /* disable VLAN filtering */
                rctl = E1000_READ_REG(&adapter->hw, RCTL);
                rctl &= ~E1000_RCTL_VFE;
@@ -4297,6 +4435,7 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
                        e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
                        adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
                }
+                }
        }
        e1000_irq_enable(adapter);
@@ -4458,12 +4597,16 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
        struct e1000_adapter *adapter = netdev_priv(netdev);
        uint32_t ctrl, ctrl_ext, rctl, manc, status;
        uint32_t wufc = adapter->wol;
+#ifdef CONFIG_PM
        int retval = 0;
+#endif
        netif_device_detach(netdev);
-        if (netif_running(netdev))
+        if (netif_running(netdev)) {
+                WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
                e1000_down(adapter);
+        }
 #ifdef CONFIG_PM
        /* Implement our own version of pci_save_state(pdev) because pci-
@@ -4521,7 +4664,9 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
                pci_enable_wake(pdev, PCI_D3cold, 0);
        }
+        /* FIXME: this code is incorrect for PCI Express */
        if (adapter->hw.mac_type >= e1000_82540 &&
+           adapter->hw.mac_type != e1000_ich8lan &&
           adapter->hw.media_type == e1000_media_type_copper) {
                manc = E1000_READ_REG(&adapter->hw, MANC);
                if (manc & E1000_MANC_SMBUS_EN) {
@@ -4532,6 +4677,9 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
                }
        }
+        if (adapter->hw.phy_type == e1000_phy_igp_3)
+                e1000_phy_powerdown_workaround(&adapter->hw);
        /* Release control of h/w to f/w.  If f/w is AMT enabled, this
         * would have already happened in close and is redundant. */
        e1000_release_hw_control(adapter);
@@ -4567,7 +4715,9 @@ e1000_resume(struct pci_dev *pdev)
        netif_device_attach(netdev);
+        /* FIXME: this code is incorrect for PCI Express */
        if (adapter->hw.mac_type >= e1000_82540 &&
+           adapter->hw.mac_type != e1000_ich8lan &&
           adapter->hw.media_type == e1000_media_type_copper) {
                manc = E1000_READ_REG(&adapter->hw, MANC);
                manc &= ~(E1000_MANC_ARP_EN);
@@ -4601,6 +4751,7 @@ static void
 e1000_netpoll(struct net_device *netdev)
 {
        struct e1000_adapter *adapter = netdev_priv(netdev);
        disable_irq(adapter->pdev->irq);
        e1000_intr(adapter->pdev->irq, netdev, NULL);
        e1000_clean_tx_irq(adapter, adapter->tx_ring);
diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h
index 048d052be29d..2d3e8b06cab0 100644
--- a/drivers/net/e1000/e1000_osdep.h
+++ b/drivers/net/e1000/e1000_osdep.h
@@ -127,4 +127,17 @@ typedef enum {
 #define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, STATUS)
+#define E1000_WRITE_ICH8_REG(a, reg, value) ( \
+    writel((value), ((a)->flash_address + reg)))
+#define E1000_READ_ICH8_REG(a, reg) ( \
+    readl((a)->flash_address + reg))
+#define E1000_WRITE_ICH8_REG16(a, reg, value) ( \
+    writew((value), ((a)->flash_address + reg)))
+#define E1000_READ_ICH8_REG16(a, reg) ( \
+    readw((a)->flash_address + reg))
 #endif /* _E1000_OSDEP_H_ */
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index e55f8969a0fb..0ef413172c68 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -45,6 +45,16 @@
 */
 #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+/* Module Parameters are always initialized to -1, so that the driver
+ * can tell the difference between no user specified value or the
+ * user asking for the default value.
+ * The true default values are loaded in when e1000_check_options is called.
+ *
+ * This is a GCC extension to ANSI C.
+ * See the item "Labeled Elements in Initializers" in the section
+ * "Extensions to the C Language Family" of the GCC documentation.
+ */
 #define E1000_PARAM(X, desc) \
        static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
        static int num_##X = 0; \
@@ -183,6 +193,24 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
 E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+/* Enable Smart Power Down of the PHY
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 0 (disabled)
+ */
+E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
+/* Enable Kumeran Lock Loss workaround
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
 #define AUTONEG_ADV_DEFAULT  0x2F
 #define AUTONEG_ADV_MASK     0x2F
 #define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
@@ -296,6 +324,7 @@ e1000_check_options(struct e1000_adapter *adapter)
                DPRINTK(PROBE, NOTICE,
                       "Warning: no configuration for board #%i\n", bd);
                DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
+                bd = E1000_MAX_NIC;
        }
        { /* Transmit Descriptor Count */
@@ -313,14 +342,9 @@ e1000_check_options(struct e1000_adapter *adapter)
                opt.arg.r.max = mac_type < e1000_82544 ?
                        E1000_MAX_TXD : E1000_MAX_82544_TXD;
-                if (num_TxDescriptors > bd) {
+                tx_ring->count = TxDescriptors[bd];
-                        tx_ring->count = TxDescriptors[bd];
+                e1000_validate_option(&tx_ring->count, &opt, adapter);
-                        e1000_validate_option(&tx_ring->count, &opt, adapter);
+                E1000_ROUNDUP(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
-                        E1000_ROUNDUP(tx_ring->count,
-                                                REQ_TX_DESCRIPTOR_MULTIPLE);
-                } else {
-                        tx_ring->count = opt.def;
-                }
                for (i = 0; i < adapter->num_tx_queues; i++)
                        tx_ring[i].count = tx_ring->count;
        }
@@ -339,14 +363,9 @@ e1000_check_options(struct e1000_adapter *adapter)
                opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD :
                        E1000_MAX_82544_RXD;
-                if (num_RxDescriptors > bd) {
+                rx_ring->count = RxDescriptors[bd];
-                        rx_ring->count = RxDescriptors[bd];
+                e1000_validate_option(&rx_ring->count, &opt, adapter);
-                        e1000_validate_option(&rx_ring->count, &opt, adapter);
+                E1000_ROUNDUP(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
-                        E1000_ROUNDUP(rx_ring->count,
-                                                REQ_RX_DESCRIPTOR_MULTIPLE);
-                } else {
-                        rx_ring->count = opt.def;
-                }
                for (i = 0; i < adapter->num_rx_queues; i++)
                        rx_ring[i].count = rx_ring->count;
        }
@@ -358,13 +377,9 @@ e1000_check_options(struct e1000_adapter *adapter)
                        .def  = OPTION_ENABLED
                };
-                if (num_XsumRX > bd) {
+                int rx_csum = XsumRX[bd];
-                        int rx_csum = XsumRX[bd];
+                e1000_validate_option(&rx_csum, &opt, adapter);
-                        e1000_validate_option(&rx_csum, &opt, adapter);
+                adapter->rx_csum = rx_csum;
-                        adapter->rx_csum = rx_csum;
-                } else {
-                        adapter->rx_csum = opt.def;
-                }
        }
        { /* Flow Control */
@@ -384,13 +399,9 @@ e1000_check_options(struct e1000_adapter *adapter)
                                         .p = fc_list }}
                };
-                if (num_FlowControl > bd) {
+                int fc = FlowControl[bd];
-                        int fc = FlowControl[bd];
+                e1000_validate_option(&fc, &opt, adapter);
-                        e1000_validate_option(&fc, &opt, adapter);
+                adapter->hw.fc = adapter->hw.original_fc = fc;
-                        adapter->hw.fc = adapter->hw.original_fc = fc;
-                } else {
-                        adapter->hw.fc = adapter->hw.original_fc = opt.def;
-                }
        }
        { /* Transmit Interrupt Delay */
                struct e1000_option opt = {
@@ -402,13 +413,8 @@ e1000_check_options(struct e1000_adapter *adapter)
                                         .max = MAX_TXDELAY }}
                };
-                if (num_TxIntDelay > bd) {
+                adapter->tx_int_delay = TxIntDelay[bd];
-                        adapter->tx_int_delay = TxIntDelay[bd];
+                e1000_validate_option(&adapter->tx_int_delay, &opt, adapter);
-                        e1000_validate_option(&adapter->tx_int_delay, &opt,
-                                                                adapter);
-                } else {
-                        adapter->tx_int_delay = opt.def;
-                }
        }
        { /* Transmit Absolute Interrupt Delay */
                struct e1000_option opt = {
@@ -420,13 +426,9 @@ e1000_check_options(struct e1000_adapter *adapter)
                                         .max = MAX_TXABSDELAY }}
                };
-                if (num_TxAbsIntDelay > bd) {
+                adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
-                        adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
+                e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
-                        e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+                                      adapter);
-                                                                adapter);
-                } else {
-                        adapter->tx_abs_int_delay = opt.def;
-                }
        }
        { /* Receive Interrupt Delay */
                struct e1000_option opt = {
@@ -438,13 +440,8 @@ e1000_check_options(struct e1000_adapter *adapter)
                                         .max = MAX_RXDELAY }}
                };
-                if (num_RxIntDelay > bd) {
+                adapter->rx_int_delay = RxIntDelay[bd];
-                        adapter->rx_int_delay = RxIntDelay[bd];
+                e1000_validate_option(&adapter->rx_int_delay, &opt, adapter);
-                        e1000_validate_option(&adapter->rx_int_delay, &opt,
-                                                                adapter);
-                } else {
-                        adapter->rx_int_delay = opt.def;
-                }
        }
        { /* Receive Absolute Interrupt Delay */
                struct e1000_option opt = {
@@ -456,13 +453,9 @@ e1000_check_options(struct e1000_adapter *adapter)
                                         .max = MAX_RXABSDELAY }}
                };
-                if (num_RxAbsIntDelay > bd) {
+                adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
-                        adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
+                e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
-                        e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+                                      adapter);
-                                                                adapter);
-                } else {
-                        adapter->rx_abs_int_delay = opt.def;
-                }
        }
        { /* Interrupt Throttling Rate */
                struct e1000_option opt = {
@@ -474,26 +467,44 @@ e1000_check_options(struct e1000_adapter *adapter)
                                         .max = MAX_ITR }}
                };
-                if (num_InterruptThrottleRate > bd) {
+                adapter->itr = InterruptThrottleRate[bd];
-                        adapter->itr = InterruptThrottleRate[bd];
+                switch (adapter->itr) {
-                        switch (adapter->itr) {
+                case 0:
-                        case 0:
+                        DPRINTK(PROBE, INFO, "%s turned off\n", opt.name);
-                                DPRINTK(PROBE, INFO, "%s turned off\n",
+                        break;
-                                        opt.name);
+                case 1:
-                                break;
+                        DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
-                        case 1:
+                                opt.name);
-                                DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
+                        break;
-                                        opt.name);
+                default:
-                                break;
+                        e1000_validate_option(&adapter->itr, &opt, adapter);
-                        default:
+                        break;
-                                e1000_validate_option(&adapter->itr, &opt,
-                                        adapter);
-                                break;
-                        }
-                } else {
-                        adapter->itr = opt.def;
                }
        }
+        { /* Smart Power Down */
+                struct e1000_option opt = {
+                        .type = enable_option,
+                        .name = "PHY Smart Power Down",
+                        .err  = "defaulting to Disabled",
+                        .def  = OPTION_DISABLED
+                };
+                int spd = SmartPowerDownEnable[bd];
+                e1000_validate_option(&spd, &opt, adapter);
+                adapter->smart_power_down = spd;
+        }
+        { /* Kumeran Lock Loss Workaround */
+                struct e1000_option opt = {
+                        .type = enable_option,
+                        .name = "Kumeran Lock Loss Workaround",
+                        .err  = "defaulting to Enabled",
+                        .def  = OPTION_ENABLED
+                };
+                        int kmrn_lock_loss = KumeranLockLoss[bd];
+                        e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
+                        adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss;
+        }
        switch (adapter->hw.media_type) {
        case e1000_media_type_fiber:
@@ -519,17 +530,18 @@ static void __devinit
 e1000_check_fiber_options(struct e1000_adapter *adapter)
 {
        int bd = adapter->bd_number;
-        if (num_Speed > bd) {
+        bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
+        if ((Speed[bd] != OPTION_UNSET)) {
                DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
                       "parameter ignored\n");
        }
-        if (num_Duplex > bd) {
+        if ((Duplex[bd] != OPTION_UNSET)) {
                DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
                       "parameter ignored\n");
        }
-        if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
+        if ((AutoNeg[bd] != OPTION_UNSET) && (AutoNeg[bd] != 0x20)) {
                DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
                                 "not valid for fiber adapters, "
                                 "parameter ignored\n");
@@ -548,6 +560,7 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
 {
        int speed, dplx, an;
        int bd = adapter->bd_number;
+        bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
        { /* Speed */
                struct e1000_opt_list speed_list[] = {{          0, "" },
@@ -564,12 +577,8 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
                                         .p = speed_list }}
                };
-                if (num_Speed > bd) {
+                speed = Speed[bd];
-                        speed = Speed[bd];
+                e1000_validate_option(&speed, &opt, adapter);
-                        e1000_validate_option(&speed, &opt, adapter);
-                } else {
-                        speed = opt.def;
-                }
        }
        { /* Duplex */
                struct e1000_opt_list dplx_list[] = {{           0, "" },
@@ -591,15 +600,11 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
                                "Speed/Duplex/AutoNeg parameter ignored.\n");
                        return;
                }
-                if (num_Duplex > bd) {
+                dplx = Duplex[bd];
-                        dplx = Duplex[bd];
+                e1000_validate_option(&dplx, &opt, adapter);
-                        e1000_validate_option(&dplx, &opt, adapter);
-                } else {
-                        dplx = opt.def;
-                }
        }
-        if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
+        if (AutoNeg[bd] != OPTION_UNSET && (speed != 0 || dplx != 0)) {
                DPRINTK(PROBE, INFO,
                       "AutoNeg specified along with Speed or Duplex, "
                       "parameter ignored\n");
@@ -648,19 +653,15 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
                                         .p = an_list }}
                };
-                if (num_AutoNeg > bd) {
+                an = AutoNeg[bd];
-                        an = AutoNeg[bd];
+                e1000_validate_option(&an, &opt, adapter);
-                        e1000_validate_option(&an, &opt, adapter);
-                } else {
-                        an = opt.def;
-                }
                adapter->hw.autoneg_advertised = an;
        }
        switch (speed + dplx) {
        case 0:
                adapter->hw.autoneg = adapter->fc_autoneg = 1;
-                if ((num_Speed > bd) && (speed != 0 || dplx != 0))
+                if (Speed[bd] != OPTION_UNSET || Duplex[bd] != OPTION_UNSET)
                        DPRINTK(PROBE, INFO,
                               "Speed and duplex autonegotiation enabled\n");
                break;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 037d870712ff..11b8f1b43dd5 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -240,10 +240,12 @@ enum {
 #define NVREG_RNDSEED_FORCE2    0x2d00
 #define NVREG_RNDSEED_FORCE3    0x7400
-        NvRegUnknownSetupReg1 = 0xA0,
+        NvRegTxDeferral = 0xA0,
-#define NVREG_UNKSETUP1_VAL     0x16070f
+#define NVREG_TX_DEFERRAL_DEFAULT       0x15050f
-        NvRegUnknownSetupReg2 = 0xA4,
+#define NVREG_TX_DEFERRAL_RGMII_10_100  0x16070f
-#define NVREG_UNKSETUP2_VAL     0x16
+#define NVREG_TX_DEFERRAL_RGMII_1000    0x14050f
+        NvRegRxDeferral = 0xA4,
+#define NVREG_RX_DEFERRAL_DEFAULT       0x16
        NvRegMacAddrA = 0xA8,
        NvRegMacAddrB = 0xAC,
        NvRegMulticastAddrA = 0xB0,
@@ -269,8 +271,10 @@ enum {
 #define NVREG_LINKSPEED_MASK    (0xFFF)
        NvRegUnknownSetupReg5 = 0x130,
 #define NVREG_UNKSETUP5_BIT31   (1<<31)
-        NvRegUnknownSetupReg3 = 0x13c,
+        NvRegTxWatermark = 0x13c,
-#define NVREG_UNKSETUP3_VAL1    0x200010
+#define NVREG_TX_WM_DESC1_DEFAULT       0x0200010
+#define NVREG_TX_WM_DESC2_3_DEFAULT     0x1e08000
+#define NVREG_TX_WM_DESC2_3_1000        0xfe08000
        NvRegTxRxControl = 0x144,
 #define NVREG_TXRXCTL_KICK      0x0001
 #define NVREG_TXRXCTL_BIT1      0x0002
@@ -658,7 +662,7 @@ static const struct register_test nv_registers_test[] = {
        { NvRegMisc1, 0x03c },
        { NvRegOffloadConfig, 0x03ff },
        { NvRegMulticastAddrA, 0xffffffff },
-        { NvRegUnknownSetupReg3, 0x0ff },
+        { NvRegTxWatermark, 0x0ff },
        { NvRegWakeUpFlags, 0x07777 },
        { 0,0 }
 };
@@ -1495,7 +1499,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
        np->tx_skbuff[nr] = skb;
 #ifdef NETIF_F_TSO
-        if (skb_shinfo(skb)->gso_size)
+        if (skb_is_gso(skb))
                tx_flags_extra = NV_TX2_TSO | (skb_shinfo(skb)->gso_size << NV_TX2_TSO_SHIFT);
        else
 #endif
@@ -2127,7 +2131,7 @@ static int nv_update_linkspeed(struct net_device *dev)
        int newdup = np->duplex;
        int mii_status;
        int retval = 0;
-        u32 control_1000, status_1000, phyreg, pause_flags;
+        u32 control_1000, status_1000, phyreg, pause_flags, txreg;
        /* BMSR_LSTATUS is latched, read it twice:
         * we want the current value.
@@ -2245,6 +2249,26 @@ set_speed:
                phyreg |= PHY_1000;
        writel(phyreg, base + NvRegPhyInterface);
+        if (phyreg & PHY_RGMII) {
+                if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000)
+                        txreg = NVREG_TX_DEFERRAL_RGMII_1000;
+                else
+                        txreg = NVREG_TX_DEFERRAL_RGMII_10_100;
+        } else {
+                txreg = NVREG_TX_DEFERRAL_DEFAULT;
+        }
+        writel(txreg, base + NvRegTxDeferral);
+        if (np->desc_ver == DESC_VER_1) {
+                txreg = NVREG_TX_WM_DESC1_DEFAULT;
+        } else {
+                if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000)
+                        txreg = NVREG_TX_WM_DESC2_3_1000;
+                else
+                        txreg = NVREG_TX_WM_DESC2_3_DEFAULT;
+        }
+        writel(txreg, base + NvRegTxWatermark);
        writel(NVREG_MISC1_FORCE | ( np->duplex ? 0 : NVREG_MISC1_HD),
                base + NvRegMisc1);
        pci_push(base);
@@ -3910,7 +3934,10 @@ static int nv_open(struct net_device *dev)
        /* 5) continue setup */
        writel(np->linkspeed, base + NvRegLinkSpeed);
-        writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3);
+        if (np->desc_ver == DESC_VER_1)
+                writel(NVREG_TX_WM_DESC1_DEFAULT, base + NvRegTxWatermark);
+        else
+                writel(NVREG_TX_WM_DESC2_3_DEFAULT, base + NvRegTxWatermark);
        writel(np->txrxctl_bits, base + NvRegTxRxControl);
        writel(np->vlanctl_bits, base + NvRegVlanControl);
        pci_push(base);
@@ -3932,8 +3959,8 @@ static int nv_open(struct net_device *dev)
        writel(readl(base + NvRegReceiverStatus), base + NvRegReceiverStatus);
        get_random_bytes(&i, sizeof(i));
        writel(NVREG_RNDSEED_FORCE | (i&NVREG_RNDSEED_MASK), base + NvRegRandomSeed);
-        writel(NVREG_UNKSETUP1_VAL, base + NvRegUnknownSetupReg1);
+        writel(NVREG_TX_DEFERRAL_DEFAULT, base + NvRegTxDeferral);
-        writel(NVREG_UNKSETUP2_VAL, base + NvRegUnknownSetupReg2);
+        writel(NVREG_RX_DEFERRAL_DEFAULT, base + NvRegRxDeferral);
        if (poll_interval == -1) {
                if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT)
                        writel(NVREG_POLL_DEFAULT_THROUGHPUT, base + NvRegPollingInterval);
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index 0641f54fc638..889f338132fa 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -122,6 +122,12 @@ struct bpqdev {
 static LIST_HEAD(bpq_devices);
+/*
+ * bpqether network devices are paired with ethernet devices below them, so
+ * form a special "super class" of normal ethernet devices; split their locks
+ * off into a separate class since they always nest.
+ */
+static struct lock_class_key bpq_netdev_xmit_lock_key;
 /* ------------------------------------------------------------------------ */
@@ -528,6 +534,7 @@ static int bpq_new_device(struct net_device *edev)
        err = register_netdevice(ndev);
        if (err)
                goto error;
+        lockdep_set_class(&ndev->_xmit_lock, &bpq_netdev_xmit_lock_key);
        /* List protected by RTNL */
        list_add_rcu(&bpq->bpq_list, &bpq_devices);
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 3a42afab5036..43e3f33ed5e2 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -271,6 +271,7 @@ static int __init ifb_init_module(void)
        for (i = 0; i < numifbs && !err; i++)
                err = ifb_init_one(i); 
        if (err) { 
+                i--;
                while (--i >= 0)
                        ifb_free_one(i);
        }
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index bf1fca5a3fa0..e3c8cd5eca67 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -146,7 +146,7 @@ static int __init ali_ircc_init(void)
 {
        ali_chip_t *chip;
        chipio_t info;
-        int ret = -ENODEV;
+        int ret;
        int cfg, cfg_base;
        int reg, revision;
        int i = 0;
@@ -160,6 +160,7 @@ static int __init ali_ircc_init(void)
                return ret;
        }
+        ret = -ENODEV;
        
        /* Probe for all the ALi chipsets we know about */
        for (chip= chips; chip->name; chip++, i++) 
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index a4674044bd6f..2eff45bedc7c 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -2353,7 +2353,7 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
 #ifdef CONFIG_PCI
 #define PCIID_VENDOR_INTEL 0x8086
 #define PCIID_VENDOR_ALI 0x10b9
-static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __devinitdata = {
+static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
        {
                .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
                .device = 0x24cc,
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index b91e082483f6..7bbd447289b5 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -1173,7 +1173,7 @@ ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb)
        uint16_t ipcse, tucse, mss;
        int err;
-        if(likely(skb_shinfo(skb)->gso_size)) {
+        if (likely(skb_is_gso(skb))) {
                if (skb_header_cloned(skb)) {
                        err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
                        if (err)
@@ -1281,7 +1281,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
        while(len) {
                buffer_info = &tx_ring->buffer_info[i];
-                size = min(len, IXGB_MAX_JUMBO_FRAME_SIZE);
+                size = min(len, IXGB_MAX_DATA_PER_TXD);
                buffer_info->length = size;
                buffer_info->dma =
                        pci_map_single(adapter->pdev,
@@ -1306,7 +1306,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
                while(len) {
                        buffer_info = &tx_ring->buffer_info[i];
-                        size = min(len, IXGB_MAX_JUMBO_FRAME_SIZE);
+                        size = min(len, IXGB_MAX_DATA_PER_TXD);
                        buffer_info->length = size;
                        buffer_info->dma =
                                pci_map_page(adapter->pdev,
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 43fef7de8cb9..997cbce9af6e 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -139,7 +139,7 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 #ifdef LOOPBACK_TSO
-        if (skb_shinfo(skb)->gso_size) {
+        if (skb_is_gso(skb)) {
                BUG_ON(skb->protocol != htons(ETH_P_IP));
                BUG_ON(skb->nh.iph->protocol != IPPROTO_TCP);
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index f4c8fd373b9b..c3e52c806b13 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -620,7 +620,7 @@ static int myri10ge_load_firmware(struct myri10ge_priv *mgp)
                return -ENXIO;
        }
        dev_info(&mgp->pdev->dev, "handoff confirmed\n");
-        myri10ge_dummy_rdma(mgp, mgp->tx.boundary != 4096);
+        myri10ge_dummy_rdma(mgp, 1);
        return 0;
 }
@@ -2116,7 +2116,7 @@ abort_linearize:
                }
                idx = (idx + 1) & tx->mask;
        } while (idx != last_idx);
-        if (skb_shinfo(skb)->gso_size) {
+        if (skb_is_gso(skb)) {
                printk(KERN_ERR
                       "myri10ge: %s: TSO but wanted to linearize?!?!?\n",
                       mgp->dev->name);
@@ -2412,14 +2412,20 @@ static int myri10ge_resume(struct pci_dev *pdev)
                return -EIO;
        }
        myri10ge_restore_state(mgp);
-        pci_enable_device(pdev);
+        status = pci_enable_device(pdev);
+        if (status < 0) {
+                dev_err(&pdev->dev, "failed to enable device\n");
+                return -EIO;
+        }
        pci_set_master(pdev);
        status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
                             netdev->name, mgp);
        if (status != 0) {
                dev_err(&pdev->dev, "failed to allocate IRQ\n");
-                goto abort_with_msi;
+                goto abort_with_enabled;
        }
        myri10ge_reset(mgp);
@@ -2438,7 +2444,8 @@ static int myri10ge_resume(struct pci_dev *pdev)
        return 0;
-abort_with_msi:
+abort_with_enabled:
+        pci_disable_device(pdev);
        return -EIO;
 }
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index c6b77acb35ef..e1fe3a0a7b0b 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -1976,7 +1976,6 @@ static int start_nic(struct s2io_nic *nic)
        XENA_dev_config_t __iomem *bar0 = nic->bar0;
        struct net_device *dev = nic->dev;
        register u64 val64 = 0;
-        u16 interruptible;
        u16 subid, i;
        mac_info_t *mac_control;
        struct config_param *config;
@@ -2047,16 +2046,6 @@ static int start_nic(struct s2io_nic *nic)
                return FAILURE;
        }
-        /*  Enable select interrupts */
-        if (nic->intr_type != INTA)
-                en_dis_able_nic_intrs(nic, ENA_ALL_INTRS, DISABLE_INTRS);
-        else {
-                interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
-                interruptible |= TX_PIC_INTR | RX_PIC_INTR;
-                interruptible |= TX_MAC_INTR | RX_MAC_INTR;
-                en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
-        }
        /*
         * With some switches, link might be already up at this point.
         * Because of this weird behavior, when we enable laser,
@@ -3749,101 +3738,19 @@ static int s2io_open(struct net_device *dev)
        if (err) {
                DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
                          dev->name);
-                if (err == -ENODEV)
+                goto hw_init_failed;
-                        goto hw_init_failed;
-                else
-                        goto hw_enable_failed;
-        }
-        /* Store the values of the MSIX table in the nic_t structure */
-        store_xmsi_data(sp);
-        /* After proper initialization of H/W, register ISR */
-        if (sp->intr_type == MSI) {
-                err = request_irq((int) sp->pdev->irq, s2io_msi_handle, 
-                        IRQF_SHARED, sp->name, dev);
-                if (err) {
-                        DBG_PRINT(ERR_DBG, "%s: MSI registration \
-failed\n", dev->name);
-                        goto isr_registration_failed;
-                }
-        }
-        if (sp->intr_type == MSI_X) {
-                int i;
-                for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
-                        if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
-                                sprintf(sp->desc1, "%s:MSI-X-%d-TX",
-                                        dev->name, i);
-                                err = request_irq(sp->entries[i].vector,
-                                          s2io_msix_fifo_handle, 0, sp->desc1,
-                                          sp->s2io_entries[i].arg);
-                                DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1, 
-                                    (unsigned long long)sp->msix_info[i].addr);
-                        } else {
-                                sprintf(sp->desc2, "%s:MSI-X-%d-RX",
-                                        dev->name, i);
-                                err = request_irq(sp->entries[i].vector,
-                                          s2io_msix_ring_handle, 0, sp->desc2,
-                                          sp->s2io_entries[i].arg);
-                                DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2, 
-                                     (unsigned long long)sp->msix_info[i].addr);
-                        }
-                        if (err) {
-                                DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \
-failed\n", dev->name, i);
-                                DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
-                                goto isr_registration_failed;
-                        }
-                        sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
-                }
-        }
-        if (sp->intr_type == INTA) {
-                err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
-                                sp->name, dev);
-                if (err) {
-                        DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
-                                  dev->name);
-                        goto isr_registration_failed;
-                }
        }
        if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
                DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
+                s2io_card_down(sp);
                err = -ENODEV;
-                goto setting_mac_address_failed;
+                goto hw_init_failed;
        }
        netif_start_queue(dev);
        return 0;
-setting_mac_address_failed:
-        if (sp->intr_type != MSI_X)
-                free_irq(sp->pdev->irq, dev);
-isr_registration_failed:
-        del_timer_sync(&sp->alarm_timer);
-        if (sp->intr_type == MSI_X) {
-                int i;
-                u16 msi_control; /* Temp variable */
-                for (i=1; (sp->s2io_entries[i].in_use == 
-                                MSIX_REGISTERED_SUCCESS); i++) {
-                        int vector = sp->entries[i].vector;
-                        void *arg = sp->s2io_entries[i].arg;
-                        free_irq(vector, arg);
-                }
-                pci_disable_msix(sp->pdev);
-                /* Temp */
-                pci_read_config_word(sp->pdev, 0x42, &msi_control);
-                msi_control &= 0xFFFE; /* Disable MSI */
-                pci_write_config_word(sp->pdev, 0x42, msi_control);
-        }
-        else if (sp->intr_type == MSI)
-                pci_disable_msi(sp->pdev);
-hw_enable_failed:
-        s2io_reset(sp);
 hw_init_failed:
        if (sp->intr_type == MSI_X) {
                if (sp->entries)
@@ -3874,7 +3781,7 @@ static int s2io_close(struct net_device *dev)
        flush_scheduled_work();
        netif_stop_queue(dev);
        /* Reset card, kill tasklet and free Tx and Rx buffers. */
-        s2io_card_down(sp, 1);
+        s2io_card_down(sp);
        sp->device_close_flag = TRUE;   /* Device is shut down. */
        return 0;
@@ -5919,7 +5826,7 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu)
        dev->mtu = new_mtu;
        if (netif_running(dev)) {
-                s2io_card_down(sp, 0);
+                s2io_card_down(sp);
                netif_stop_queue(dev);
                if (s2io_card_up(sp)) {
                        DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
@@ -6216,43 +6123,106 @@ static  int rxd_owner_bit_reset(nic_t *sp)
 }
-static void s2io_card_down(nic_t * sp, int flag)
+static int s2io_add_isr(nic_t * sp)
 {
-        int cnt = 0;
+        int ret = 0;
-        XENA_dev_config_t __iomem *bar0 = sp->bar0;
-        unsigned long flags;
-        register u64 val64 = 0;
        struct net_device *dev = sp->dev;
+        int err = 0;
-        del_timer_sync(&sp->alarm_timer);
+        if (sp->intr_type == MSI)
-        /* If s2io_set_link task is executing, wait till it completes. */
+                ret = s2io_enable_msi(sp);
-        while (test_and_set_bit(0, &(sp->link_state))) {
+        else if (sp->intr_type == MSI_X)
-                msleep(50);
+                ret = s2io_enable_msi_x(sp);
+        if (ret) {
+                DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
+                sp->intr_type = INTA;
        }
-        atomic_set(&sp->card_state, CARD_DOWN);
-        /* disable Tx and Rx traffic on the NIC */
+        /* Store the values of the MSIX table in the nic_t structure */
-        stop_nic(sp);
+        store_xmsi_data(sp);
-        if (flag) {
-                if (sp->intr_type == MSI_X) {
-                        int i;
-                        u16 msi_control;
-                        for (i=1; (sp->s2io_entries[i].in_use ==
+        /* After proper initialization of H/W, register ISR */
-                                MSIX_REGISTERED_SUCCESS); i++) {
+        if (sp->intr_type == MSI) {
-                                int vector = sp->entries[i].vector;
+                err = request_irq((int) sp->pdev->irq, s2io_msi_handle,
-                                void *arg = sp->s2io_entries[i].arg;
+                        IRQF_SHARED, sp->name, dev);
+                if (err) {
+                        pci_disable_msi(sp->pdev);
+                        DBG_PRINT(ERR_DBG, "%s: MSI registration failed\n",
+                                  dev->name);
+                        return -1;
+                }
+        }
+        if (sp->intr_type == MSI_X) {
+                int i;
-                                free_irq(vector, arg);
+                for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
+                        if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
+                                sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
+                                        dev->name, i);
+                                err = request_irq(sp->entries[i].vector,
+                                          s2io_msix_fifo_handle, 0, sp->desc[i],
+                                                  sp->s2io_entries[i].arg);
+                                DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i],
+                                (unsigned long long)sp->msix_info[i].addr);
+                        } else {
+                                sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
+                                        dev->name, i);
+                                err = request_irq(sp->entries[i].vector,
+                                          s2io_msix_ring_handle, 0, sp->desc[i],
+                                                  sp->s2io_entries[i].arg);
+                                DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i],
+                                (unsigned long long)sp->msix_info[i].addr);
                        }
-                        pci_read_config_word(sp->pdev, 0x42, &msi_control);
+                        if (err) {
-                        msi_control &= 0xFFFE; /* Disable MSI */
+                                DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration "
-                        pci_write_config_word(sp->pdev, 0x42, msi_control);
+                                          "failed\n", dev->name, i);
-                        pci_disable_msix(sp->pdev);
+                                DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
-                } else {
+                                return -1;
-                        free_irq(sp->pdev->irq, dev);
+                        }
-                        if (sp->intr_type == MSI)
+                        sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
-                                pci_disable_msi(sp->pdev);
+                }
+        }
+        if (sp->intr_type == INTA) {
+                err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
+                                sp->name, dev);
+                if (err) {
+                        DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
+                                  dev->name);
+                        return -1;
+                }
+        }
+        return 0;
+}
+static void s2io_rem_isr(nic_t * sp)
+{
+        int cnt = 0;
+        struct net_device *dev = sp->dev;
+        if (sp->intr_type == MSI_X) {
+                int i;
+                u16 msi_control;
+                for (i=1; (sp->s2io_entries[i].in_use ==
+                        MSIX_REGISTERED_SUCCESS); i++) {
+                        int vector = sp->entries[i].vector;
+                        void *arg = sp->s2io_entries[i].arg;
+                        free_irq(vector, arg);
+                }
+                pci_read_config_word(sp->pdev, 0x42, &msi_control);
+                msi_control &= 0xFFFE; /* Disable MSI */
+                pci_write_config_word(sp->pdev, 0x42, msi_control);
+                pci_disable_msix(sp->pdev);
+        } else {
+                free_irq(sp->pdev->irq, dev);
+                if (sp->intr_type == MSI) {
+                        u16 val;
+                        pci_disable_msi(sp->pdev);
+                        pci_read_config_word(sp->pdev, 0x4c, &val);
+                        val ^= 0x1;
+                        pci_write_config_word(sp->pdev, 0x4c, val);
                }
        }
        /* Waiting till all Interrupt handlers are complete */
@@ -6263,6 +6233,26 @@ static void s2io_card_down(nic_t * sp, int flag)
                        break;
                cnt++;
        } while(cnt < 5);
+}
+static void s2io_card_down(nic_t * sp)
+{
+        int cnt = 0;
+        XENA_dev_config_t __iomem *bar0 = sp->bar0;
+        unsigned long flags;
+        register u64 val64 = 0;
+        del_timer_sync(&sp->alarm_timer);
+        /* If s2io_set_link task is executing, wait till it completes. */
+        while (test_and_set_bit(0, &(sp->link_state))) {
+                msleep(50);
+        }
+        atomic_set(&sp->card_state, CARD_DOWN);
+        /* disable Tx and Rx traffic on the NIC */
+        stop_nic(sp);
+        s2io_rem_isr(sp);
        /* Kill tasklet. */
        tasklet_kill(&sp->task);
@@ -6314,23 +6304,16 @@ static int s2io_card_up(nic_t * sp)
        mac_info_t *mac_control;
        struct config_param *config;
        struct net_device *dev = (struct net_device *) sp->dev;
+        u16 interruptible;
        /* Initialize the H/W I/O registers */
        if (init_nic(sp) != 0) {
                DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
                          dev->name);
+                s2io_reset(sp);
                return -ENODEV;
        }
-        if (sp->intr_type == MSI)
-                ret = s2io_enable_msi(sp);
-        else if (sp->intr_type == MSI_X)
-                ret = s2io_enable_msi_x(sp);
-        if (ret) {
-                DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
-                sp->intr_type = INTA;
-        }
        /*
         * Initializing the Rx buffers. For now we are considering only 1
         * Rx ring and initializing buffers into 30 Rx blocks
@@ -6361,21 +6344,39 @@ static int s2io_card_up(nic_t * sp)
                        sp->lro_max_aggr_per_sess = lro_max_pkts;
        }
-        /* Enable tasklet for the device */
-        tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
        /* Enable Rx Traffic and interrupts on the NIC */
        if (start_nic(sp)) {
                DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
-                tasklet_kill(&sp->task);
                s2io_reset(sp);
-                free_irq(dev->irq, dev);
+                free_rx_buffers(sp);
+                return -ENODEV;
+        }
+        /* Add interrupt service routine */
+        if (s2io_add_isr(sp) != 0) {
+                if (sp->intr_type == MSI_X)
+                        s2io_rem_isr(sp);
+                s2io_reset(sp);
                free_rx_buffers(sp);
                return -ENODEV;
        }
        S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
+        /* Enable tasklet for the device */
+        tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
+        /*  Enable select interrupts */
+        if (sp->intr_type != INTA)
+                en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS);
+        else {
+                interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
+                interruptible |= TX_PIC_INTR | RX_PIC_INTR;
+                interruptible |= TX_MAC_INTR | RX_MAC_INTR;
+                en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
+        }
        atomic_set(&sp->card_state, CARD_UP);
        return 0;
 }
@@ -6395,7 +6396,7 @@ static void s2io_restart_nic(unsigned long data)
        struct net_device *dev = (struct net_device *) data;
        nic_t *sp = dev->priv;
-        s2io_card_down(sp, 0);
+        s2io_card_down(sp);
        if (s2io_card_up(sp)) {
                DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
                          dev->name);
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index c43f52179708..217097bc22f1 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -829,8 +829,7 @@ struct s2io_nic {
 #define MSIX_FLG                0xA5
        struct msix_entry *entries;
        struct s2io_msix_entry *s2io_entries;
-        char desc1[35];
+        char desc[MAX_REQUESTED_MSI_X][25];
-        char desc2[35];
        int avail_msix_vectors; /* No. of MSI-X vectors granted by system */
@@ -1002,7 +1001,7 @@ static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag);
 static struct ethtool_ops netdev_ethtool_ops;
 static void s2io_set_link(unsigned long data);
 static int s2io_set_swapper(nic_t * sp);
-static void s2io_card_down(nic_t *nic, int flag);
+static void s2io_card_down(nic_t *nic);
 static int s2io_card_up(nic_t *nic);
 static int get_xena_rev_id(struct pci_dev *pdev);
 static void restore_xmsi_data(nic_t *nic);
diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h
index 2b19f8ad0318..7f8e6d0084c7 100644
--- a/drivers/net/sk98lin/h/xmac_ii.h
+++ b/drivers/net/sk98lin/h/xmac_ii.h
@@ -1473,7 +1473,7 @@ extern "C" {
 #define GM_TXCR_FORCE_JAM       (1<<15) /* Bit 15:      Force Jam / Flow-Control */
 #define GM_TXCR_CRC_DIS         (1<<14) /* Bit 14:      Disable insertion of CRC */
 #define GM_TXCR_PAD_DIS         (1<<13) /* Bit 13:      Disable padding of packets */
-#define GM_TXCR_COL_THR_MSK     (1<<10) /* Bit 12..10:  Collision Threshold */
+#define GM_TXCR_COL_THR_MSK     (7<<10) /* Bit 12..10:  Collision Threshold */
 #define TX_COL_THR(x)           (SHIFT10(x) & GM_TXCR_COL_THR_MSK)
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 82200bfaa8ed..7de9a07b2ac2 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -516,10 +516,7 @@ static int skge_set_pauseparam(struct net_device *dev,
 /* Chip internal frequency for clock calculations */
 static inline u32 hwkhz(const struct skge_hw *hw)
 {
-        if (hw->chip_id == CHIP_ID_GENESIS)
+        return (hw->chip_id == CHIP_ID_GENESIS) ? 53125 : 78125;
-                return 53215; /* or:  53.125 MHz */
-        else
-                return 78215; /* or:  78.125 MHz */
 }
 /* Chip HZ to microseconds */
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index ed19ff47ce11..593387b3c0dd 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -1734,11 +1734,11 @@ enum {
        GM_TXCR_FORCE_JAM       = 1<<15, /* Bit 15:     Force Jam / Flow-Control */
        GM_TXCR_CRC_DIS         = 1<<14, /* Bit 14:     Disable insertion of CRC */
        GM_TXCR_PAD_DIS         = 1<<13, /* Bit 13:     Disable padding of packets */
-        GM_TXCR_COL_THR_MSK     = 1<<10, /* Bit 12..10: Collision Threshold */
+        GM_TXCR_COL_THR_MSK     = 7<<10, /* Bit 12..10: Collision Threshold */
 };
 #define TX_COL_THR(x)           (((x)<<10) & GM_TXCR_COL_THR_MSK)
-#define TX_COL_DEF              0x04
+#define TX_COL_DEF              0x04    /* late collision after 64 byte */
 /*      GM_RX_CTRL                      16 bit r/w      Receive Control Register */
 enum {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 418f169a6a31..de91609ca112 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -50,7 +50,7 @@
 #include "sky2.h"
 #define DRV_NAME                "sky2"
-#define DRV_VERSION             "1.4"
+#define DRV_VERSION             "1.5"
 #define PFX                     DRV_NAME " "
 /*
@@ -65,6 +65,7 @@
 #define RX_MAX_PENDING          (RX_LE_SIZE/2 - 2)
 #define RX_DEF_PENDING          RX_MAX_PENDING
 #define RX_SKB_ALIGN            8
+#define RX_BUF_WRITE            16
 #define TX_RING_SIZE            512
 #define TX_DEF_PENDING          (TX_RING_SIZE - 1)
@@ -234,7 +235,6 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
                }
                if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-                        sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
                        sky2_pci_write32(hw, PCI_DEV_REG3, 0);
                        reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
                        reg1 &= P_ASPM_CONTROL_MSK;
@@ -243,6 +243,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
                }
                sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+                udelay(100);
                break;
@@ -255,6 +256,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
                else
                        reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
                sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+                udelay(100);
                if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
                        sky2_write8(hw, B2_Y2_CLK_GATE, 0);
@@ -1159,7 +1161,7 @@ static unsigned tx_le_req(const struct sk_buff *skb)
        count = sizeof(dma_addr_t) / sizeof(u32);
        count += skb_shinfo(skb)->nr_frags * count;
-        if (skb_shinfo(skb)->gso_size)
+        if (skb_is_gso(skb))
                ++count;
        if (skb->ip_summed == CHECKSUM_HW)
@@ -1389,7 +1391,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
        }
        sky2->tx_cons = put;
-        if (tx_avail(sky2) > MAX_SKB_TX_LE)
+        if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
                netif_wake_queue(dev);
 }
@@ -1888,9 +1890,6 @@ resubmit:
        re->skb->ip_summed = CHECKSUM_NONE;
        sky2_rx_add(sky2, re->mapaddr);
-        /* Tell receiver about new buffers. */
-        sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put);
        return skb;
 oversize:
@@ -1937,7 +1936,9 @@ static inline int sky2_more_work(const struct sky2_hw *hw)
 /* Process status response ring */
 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 {
+        struct sky2_port *sky2;
        int work_done = 0;
+        unsigned buf_write[2] = { 0, 0 };
        u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
        rmb();
@@ -1945,7 +1946,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
        while (hw->st_idx != hwidx) {
                struct sky2_status_le *le  = hw->st_le + hw->st_idx;
                struct net_device *dev;
-                struct sky2_port *sky2;
                struct sk_buff *skb;
                u32 status;
                u16 length;
@@ -1978,6 +1978,14 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 #endif
                                netif_receive_skb(skb);
+                        /* Update receiver after 16 frames */
+                        if (++buf_write[le->link] == RX_BUF_WRITE) {
+                                sky2_put_idx(hw, rxqaddr[le->link],
+                                             sky2->rx_put);
+                                buf_write[le->link] = 0;
+                        }
+                        /* Stop after net poll weight */
                        if (++work_done >= to_do)
                                goto exit_loop;
                        break;
@@ -2016,6 +2024,16 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
        }
 exit_loop:
+        if (buf_write[0]) {
+                sky2 = netdev_priv(hw->dev[0]);
+                sky2_put_idx(hw, Q_R1, sky2->rx_put);
+        }
+        if (buf_write[1]) {
+                sky2 = netdev_priv(hw->dev[1]);
+                sky2_put_idx(hw, Q_R2, sky2->rx_put);
+        }
        return work_done;
 }
@@ -2186,9 +2204,6 @@ static int sky2_poll(struct net_device *dev0, int *budget)
        int work_done = 0;
        u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
-        if (!~status)
-                goto out;
        if (status & Y2_IS_HW_ERR)
                sky2_hw_intr(hw);
@@ -2225,7 +2240,7 @@ static int sky2_poll(struct net_device *dev0, int *budget)
        if (sky2_more_work(hw))
                return 1;
-out:
        netif_rx_complete(dev0);
        sky2_read32(hw, B0_Y2_SP_LISR);
@@ -2286,7 +2301,7 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
 }
-static int __devinit sky2_reset(struct sky2_hw *hw)
+static int sky2_reset(struct sky2_hw *hw)
 {
        u16 status;
        u8 t8, pmd_type;
@@ -3437,17 +3452,14 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
                return -EINVAL;
        del_timer_sync(&hw->idle_timer);
+        netif_poll_disable(hw->dev[0]);
        for (i = 0; i < hw->ports; i++) {
                struct net_device *dev = hw->dev[i];
-                if (dev) {
+                if (netif_running(dev)) {
-                        if (!netif_running(dev))
-                                continue;
                        sky2_down(dev);
                        netif_device_detach(dev);
-                        netif_poll_disable(dev);
                }
        }
@@ -3474,9 +3486,8 @@ static int sky2_resume(struct pci_dev *pdev)
        for (i = 0; i < hw->ports; i++) {
                struct net_device *dev = hw->dev[i];
-                if (dev && netif_running(dev)) {
+                if (netif_running(dev)) {
                        netif_device_attach(dev);
-                        netif_poll_enable(dev);
                        err = sky2_up(dev);
                        if (err) {
@@ -3488,6 +3499,7 @@ static int sky2_resume(struct pci_dev *pdev)
                }
        }
+        netif_poll_enable(hw->dev[0]);
        sky2_idle_start(hw);
 out:
        return err;
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 8a0bc5525f0a..2db8d19b22d1 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1480,7 +1480,7 @@ enum {
        GM_TXCR_FORCE_JAM       = 1<<15, /* Bit 15:     Force Jam / Flow-Control */
        GM_TXCR_CRC_DIS         = 1<<14, /* Bit 14:     Disable insertion of CRC */
        GM_TXCR_PAD_DIS         = 1<<13, /* Bit 13:     Disable padding of packets */
-        GM_TXCR_COL_THR_MSK     = 1<<10, /* Bit 12..10: Collision Threshold */
+        GM_TXCR_COL_THR_MSK     = 7<<10, /* Bit 12..10: Collision Threshold */
 };
 #define TX_COL_THR(x)           (((x)<<10) & GM_TXCR_COL_THR_MSK)
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index b4028049ed76..4ec4b4d23ae5 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -354,6 +354,24 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
 #define SMC_IRQ_FLAGS           (0)
+#elif   defined(CONFIG_ARCH_VERSATILE)
+#define SMC_CAN_USE_8BIT        1
+#define SMC_CAN_USE_16BIT       1
+#define SMC_CAN_USE_32BIT       1
+#define SMC_NOWAIT              1
+#define SMC_inb(a, r)           readb((a) + (r))
+#define SMC_inw(a, r)           readw((a) + (r))
+#define SMC_inl(a, r)           readl((a) + (r))
+#define SMC_outb(v, a, r)       writeb(v, (a) + (r))
+#define SMC_outw(v, a, r)       writew(v, (a) + (r))
+#define SMC_outl(v, a, r)       writel(v, (a) + (r))
+#define SMC_insl(a, r, p, l)    readsl((a) + (r), p, l)
+#define SMC_outsl(a, r, p, l)   writesl((a) + (r), p, l)
+#define SMC_IRQ_FLAGS           (0)
 #else
 #define SMC_CAN_USE_8BIT        1
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index b30290d53f79..ec1a8e2d458e 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -84,7 +84,7 @@ MODULE_DEVICE_TABLE(pci, spider_net_pci_tbl);
 *
 * returns the content of the specified SMMIO register.
 */
-static u32
+static inline u32
 spider_net_read_reg(struct spider_net_card *card, u32 reg)
 {
        u32 value;
@@ -101,7 +101,7 @@ spider_net_read_reg(struct spider_net_card *card, u32 reg)
 * @reg: register to write to
 * @value: value to write into the specified SMMIO register
 */
-static void
+static inline void
 spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value)
 {
        value = cpu_to_le32(value);
@@ -259,39 +259,10 @@ spider_net_get_mac_address(struct net_device *netdev)
 *
 * returns the status as in the dmac_cmd_status field of the descriptor
 */
-static enum spider_net_descr_status
+static inline int
 spider_net_get_descr_status(struct spider_net_descr *descr)
 {
-        u32 cmd_status;
+        return descr->dmac_cmd_status & SPIDER_NET_DESCR_IND_PROC_MASK;
-        cmd_status = descr->dmac_cmd_status;
-        cmd_status >>= SPIDER_NET_DESCR_IND_PROC_SHIFT;
-        /* no need to mask out any bits, as cmd_status is 32 bits wide only
-         * (and unsigned) */
-        return cmd_status;
-}
-/**
- * spider_net_set_descr_status -- sets the status of a descriptor
- * @descr: descriptor to change
- * @status: status to set in the descriptor
- *
- * changes the status to the specified value. Doesn't change other bits
- * in the status
- */
-static void
-spider_net_set_descr_status(struct spider_net_descr *descr,
-                            enum spider_net_descr_status status)
-{
-        u32 cmd_status;
-        /* read the status */
-        cmd_status = descr->dmac_cmd_status;
-        /* clean the upper 4 bits */
-        cmd_status &= SPIDER_NET_DESCR_IND_PROC_MASKO;
-        /* add the status to it */
-        cmd_status |= ((u32)status)<<SPIDER_NET_DESCR_IND_PROC_SHIFT;
-        /* and write it back */
-        descr->dmac_cmd_status = cmd_status;
 }
 /**
@@ -328,24 +299,23 @@ spider_net_free_chain(struct spider_net_card *card,
 static int
 spider_net_init_chain(struct spider_net_card *card,
                       struct spider_net_descr_chain *chain,
-                       struct spider_net_descr *start_descr, int no)
+                       struct spider_net_descr *start_descr,
+                       int direction, int no)
 {
        int i;
        struct spider_net_descr *descr;
        dma_addr_t buf;
-        atomic_set(&card->rx_chain_refill,0);
        descr = start_descr;
        memset(descr, 0, sizeof(*descr) * no);
        /* set up the hardware pointers in each descriptor */
        for (i=0; i<no; i++, descr++) {
-                spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE);
+                descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
                buf = pci_map_single(card->pdev, descr,
                                     SPIDER_NET_DESCR_SIZE,
-                                     PCI_DMA_BIDIRECTIONAL);
+                                     direction);
                if (buf == DMA_ERROR_CODE)
                        goto iommu_error;
@@ -360,10 +330,11 @@ spider_net_init_chain(struct spider_net_card *card,
        start_descr->prev = descr-1;
        descr = start_descr;
-        for (i=0; i < no; i++, descr++) {
+        if (direction == PCI_DMA_FROMDEVICE)
-                descr->next_descr_addr = descr->next->bus_addr;
+                for (i=0; i < no; i++, descr++)
-        }
+                        descr->next_descr_addr = descr->next->bus_addr;
+        spin_lock_init(&chain->lock);
        chain->head = start_descr;
        chain->tail = start_descr;
@@ -375,7 +346,7 @@ iommu_error:
                if (descr->bus_addr)
                        pci_unmap_single(card->pdev, descr->bus_addr,
                                         SPIDER_NET_DESCR_SIZE,
-                                         PCI_DMA_BIDIRECTIONAL);
+                                         direction);
        return -ENOMEM;
 }
@@ -396,7 +367,7 @@ spider_net_free_rx_chain_contents(struct spider_net_card *card)
                        dev_kfree_skb(descr->skb);
                        pci_unmap_single(card->pdev, descr->buf_addr,
                                         SPIDER_NET_MAX_FRAME,
-                                         PCI_DMA_BIDIRECTIONAL);
+                                         PCI_DMA_FROMDEVICE);
                }
                descr = descr->next;
        }
@@ -446,15 +417,16 @@ spider_net_prepare_rx_descr(struct spider_net_card *card,
                skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset);
        /* io-mmu-map the skb */
        buf = pci_map_single(card->pdev, descr->skb->data,
-                             SPIDER_NET_MAX_FRAME, PCI_DMA_BIDIRECTIONAL);
+                        SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
        descr->buf_addr = buf;
        if (buf == DMA_ERROR_CODE) {
                dev_kfree_skb_any(descr->skb);
                if (netif_msg_rx_err(card) && net_ratelimit())
                        pr_err("Could not iommu-map rx buffer\n");
-                spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE);
+                descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
        } else {
-                descr->dmac_cmd_status = SPIDER_NET_DMAC_RX_CARDOWNED;
+                descr->dmac_cmd_status = SPIDER_NET_DESCR_CARDOWNED |
+                                         SPIDER_NET_DMAC_NOINTR_COMPLETE;
        }
        return error;
@@ -468,7 +440,7 @@ spider_net_prepare_rx_descr(struct spider_net_card *card,
 * chip by writing to the appropriate register. DMA is enabled in
 * spider_net_enable_rxdmac.
 */
-static void
+static inline void
 spider_net_enable_rxchtails(struct spider_net_card *card)
 {
        /* assume chain is aligned correctly */
@@ -483,7 +455,7 @@ spider_net_enable_rxchtails(struct spider_net_card *card)
 * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
 * in the GDADMACCNTR register
 */
-static void
+static inline void
 spider_net_enable_rxdmac(struct spider_net_card *card)
 {
        wmb();
@@ -500,23 +472,24 @@ spider_net_enable_rxdmac(struct spider_net_card *card)
 static void
 spider_net_refill_rx_chain(struct spider_net_card *card)
 {
-        struct spider_net_descr_chain *chain;
+        struct spider_net_descr_chain *chain = &card->rx_chain;
+        unsigned long flags;
-        chain = &card->rx_chain;
        /* one context doing the refill (and a second context seeing that
         * and omitting it) is ok. If called by NAPI, we'll be called again
         * as spider_net_decode_one_descr is called several times. If some
         * interrupt calls us, the NAPI is about to clean up anyway. */
-        if (atomic_inc_return(&card->rx_chain_refill) == 1)
+        if (!spin_trylock_irqsave(&chain->lock, flags))
-                while (spider_net_get_descr_status(chain->head) ==
+                return;
-                       SPIDER_NET_DESCR_NOT_IN_USE) {
-                        if (spider_net_prepare_rx_descr(card, chain->head))
+        while (spider_net_get_descr_status(chain->head) ==
-                                break;
+                        SPIDER_NET_DESCR_NOT_IN_USE) {
-                        chain->head = chain->head->next;
+                if (spider_net_prepare_rx_descr(card, chain->head))
-                }
+                        break;
+                chain->head = chain->head->next;
+        }
-        atomic_dec(&card->rx_chain_refill);
+        spin_unlock_irqrestore(&chain->lock, flags);
 }
 /**
@@ -554,111 +527,6 @@ error:
 }
 /**
- * spider_net_release_tx_descr - processes a used tx descriptor
- * @card: card structure
- * @descr: descriptor to release
- *
- * releases a used tx descriptor (unmapping, freeing of skb)
- */
-static void
-spider_net_release_tx_descr(struct spider_net_card *card,
-                            struct spider_net_descr *descr)
-{
-        struct sk_buff *skb;
-        /* unmap the skb */
-        skb = descr->skb;
-        pci_unmap_single(card->pdev, descr->buf_addr, skb->len,
-                         PCI_DMA_BIDIRECTIONAL);
-        dev_kfree_skb_any(skb);
-        /* set status to not used */
-        spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE);
-}
-/**
- * spider_net_release_tx_chain - processes sent tx descriptors
- * @card: adapter structure
- * @brutal: if set, don't care about whether descriptor seems to be in use
- *
- * returns 0 if the tx ring is empty, otherwise 1.
- *
- * spider_net_release_tx_chain releases the tx descriptors that spider has
- * finished with (if non-brutal) or simply release tx descriptors (if brutal).
- * If some other context is calling this function, we return 1 so that we're
- * scheduled again (if we were scheduled) and will not loose initiative.
- */
-static int
-spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
-{
-        struct spider_net_descr_chain *tx_chain = &card->tx_chain;
-        enum spider_net_descr_status status;
-        if (atomic_inc_return(&card->tx_chain_release) != 1) {
-                atomic_dec(&card->tx_chain_release);
-                return 1;
-        }
-        for (;;) {
-                status = spider_net_get_descr_status(tx_chain->tail);
-                switch (status) {
-                case SPIDER_NET_DESCR_CARDOWNED:
-                        if (!brutal)
-                                goto out;
-                        /* fallthrough, if we release the descriptors
-                         * brutally (then we don't care about
-                         * SPIDER_NET_DESCR_CARDOWNED) */
-                case SPIDER_NET_DESCR_RESPONSE_ERROR:
-                case SPIDER_NET_DESCR_PROTECTION_ERROR:
-                case SPIDER_NET_DESCR_FORCE_END:
-                        if (netif_msg_tx_err(card))
-                                pr_err("%s: forcing end of tx descriptor "
-                                       "with status x%02x\n",
-                                       card->netdev->name, status);
-                        card->netdev_stats.tx_dropped++;
-                        break;
-                case SPIDER_NET_DESCR_COMPLETE:
-                        card->netdev_stats.tx_packets++;
-                        card->netdev_stats.tx_bytes +=
-                                tx_chain->tail->skb->len;
-                        break;
-                default: /* any other value (== SPIDER_NET_DESCR_NOT_IN_USE) */
-                        goto out;
-                }
-                spider_net_release_tx_descr(card, tx_chain->tail);
-                tx_chain->tail = tx_chain->tail->next;
-        }
-out:
-        atomic_dec(&card->tx_chain_release);
-        netif_wake_queue(card->netdev);
-        if (status == SPIDER_NET_DESCR_CARDOWNED)
-                return 1;
-        return 0;
-}
-/**
- * spider_net_cleanup_tx_ring - cleans up the TX ring
- * @card: card structure
- *
- * spider_net_cleanup_tx_ring is called by the tx_timer (as we don't use
- * interrupts to cleanup our TX ring) and returns sent packets to the stack
- * by freeing them
- */
-static void
-spider_net_cleanup_tx_ring(struct spider_net_card *card)
-{
-        if ( (spider_net_release_tx_chain(card, 0)) &&
-              (card->netdev->flags & IFF_UP) ) {
-                mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER);
-        }
-}
-/**
 * spider_net_get_multicast_hash - generates hash for multicast filter table
 * @addr: multicast address
 *
@@ -761,97 +629,6 @@ spider_net_disable_rxdmac(struct spider_net_card *card)
 }
 /**
- * spider_net_stop - called upon ifconfig down
- * @netdev: interface device structure
- *
- * always returns 0
- */
-int
-spider_net_stop(struct net_device *netdev)
-{
-        struct spider_net_card *card = netdev_priv(netdev);
-        tasklet_kill(&card->rxram_full_tl);
-        netif_poll_disable(netdev);
-        netif_carrier_off(netdev);
-        netif_stop_queue(netdev);
-        del_timer_sync(&card->tx_timer);
-        /* disable/mask all interrupts */
-        spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
-        spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
-        spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
-        /* free_irq(netdev->irq, netdev);*/
-        free_irq(to_pci_dev(netdev->class_dev.dev)->irq, netdev);
-        spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
-                             SPIDER_NET_DMA_TX_FEND_VALUE);
-        /* turn off DMA, force end */
-        spider_net_disable_rxdmac(card);
-        /* release chains */
-        spider_net_release_tx_chain(card, 1);
-        spider_net_free_chain(card, &card->tx_chain);
-        spider_net_free_chain(card, &card->rx_chain);
-        return 0;
-}
-/**
- * spider_net_get_next_tx_descr - returns the next available tx descriptor
- * @card: device structure to get descriptor from
- *
- * returns the address of the next descriptor, or NULL if not available.
- */
-static struct spider_net_descr *
-spider_net_get_next_tx_descr(struct spider_net_card *card)
-{
-        /* check, if head points to not-in-use descr */
-        if ( spider_net_get_descr_status(card->tx_chain.head) ==
-             SPIDER_NET_DESCR_NOT_IN_USE ) {
-                return card->tx_chain.head;
-        } else {
-                return NULL;
-        }
-}
-/**
- * spider_net_set_txdescr_cmdstat - sets the tx descriptor command field
- * @descr: descriptor structure to fill out
- * @skb: packet to consider
- *
- * fills out the command and status field of the descriptor structure,
- * depending on hardware checksum settings.
- */
-static void
-spider_net_set_txdescr_cmdstat(struct spider_net_descr *descr,
-                               struct sk_buff *skb)
-{
-        /* make sure the other fields in the descriptor are written */
-        wmb();
-        if (skb->ip_summed != CHECKSUM_HW) {
-                descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_NOCS;
-                return;
-        }
-        /* is packet ip?
-         * if yes: tcp? udp? */
-        if (skb->protocol == htons(ETH_P_IP)) {
-                if (skb->nh.iph->protocol == IPPROTO_TCP)
-                        descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_TCPCS;
-                else if (skb->nh.iph->protocol == IPPROTO_UDP)
-                        descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_UDPCS;
-                else /* the stack should checksum non-tcp and non-udp
-                        packets on his own: NETIF_F_IP_CSUM */
-                        descr->dmac_cmd_status = SPIDER_NET_DMAC_CMDSTAT_NOCS;
-        }
-}
-/**
 * spider_net_prepare_tx_descr - fill tx descriptor with skb data
 * @card: card structure
 * @descr: descriptor structure to fill out
@@ -864,13 +641,12 @@ spider_net_set_txdescr_cmdstat(struct spider_net_descr *descr,
 */
 static int
 spider_net_prepare_tx_descr(struct spider_net_card *card,
-                            struct spider_net_descr *descr,
                            struct sk_buff *skb)
 {
+        struct spider_net_descr *descr = card->tx_chain.head;
        dma_addr_t buf;
-        buf = pci_map_single(card->pdev, skb->data,
+        buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
-                             skb->len, PCI_DMA_BIDIRECTIONAL);
        if (buf == DMA_ERROR_CODE) {
                if (netif_msg_tx_err(card) && net_ratelimit())
                        pr_err("could not iommu-map packet (%p, %i). "
@@ -880,10 +656,101 @@ spider_net_prepare_tx_descr(struct spider_net_card *card,
        descr->buf_addr = buf;
        descr->buf_size = skb->len;
+        descr->next_descr_addr = 0;
        descr->skb = skb;
        descr->data_status = 0;
-        spider_net_set_txdescr_cmdstat(descr,skb);
+        descr->dmac_cmd_status =
+                        SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_NOCS;
+        if (skb->protocol == htons(ETH_P_IP))
+                switch (skb->nh.iph->protocol) {
+                case IPPROTO_TCP:
+                        descr->dmac_cmd_status |= SPIDER_NET_DMAC_TCP;
+                        break;
+                case IPPROTO_UDP:
+                        descr->dmac_cmd_status |= SPIDER_NET_DMAC_UDP;
+                        break;
+                }
+        descr->prev->next_descr_addr = descr->bus_addr;
+        return 0;
+}
+/**
+ * spider_net_release_tx_descr - processes a used tx descriptor
+ * @card: card structure
+ * @descr: descriptor to release
+ *
+ * releases a used tx descriptor (unmapping, freeing of skb)
+ */
+static inline void
+spider_net_release_tx_descr(struct spider_net_card *card)
+{
+        struct spider_net_descr *descr = card->tx_chain.tail;
+        struct sk_buff *skb;
+        card->tx_chain.tail = card->tx_chain.tail->next;
+        descr->dmac_cmd_status |= SPIDER_NET_DESCR_NOT_IN_USE;
+        /* unmap the skb */
+        skb = descr->skb;
+        pci_unmap_single(card->pdev, descr->buf_addr, skb->len,
+                        PCI_DMA_TODEVICE);
+        dev_kfree_skb_any(skb);
+}
+/**
+ * spider_net_release_tx_chain - processes sent tx descriptors
+ * @card: adapter structure
+ * @brutal: if set, don't care about whether descriptor seems to be in use
+ *
+ * returns 0 if the tx ring is empty, otherwise 1.
+ *
+ * spider_net_release_tx_chain releases the tx descriptors that spider has
+ * finished with (if non-brutal) or simply release tx descriptors (if brutal).
+ * If some other context is calling this function, we return 1 so that we're
+ * scheduled again (if we were scheduled) and will not loose initiative.
+ */
+static int
+spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
+{
+        struct spider_net_descr_chain *chain = &card->tx_chain;
+        int status;
+        spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR);
+        while (chain->tail != chain->head) {
+                status = spider_net_get_descr_status(chain->tail);
+                switch (status) {
+                case SPIDER_NET_DESCR_COMPLETE:
+                        card->netdev_stats.tx_packets++;
+                        card->netdev_stats.tx_bytes += chain->tail->skb->len;
+                        break;
+                case SPIDER_NET_DESCR_CARDOWNED:
+                        if (!brutal)
+                                return 1;
+                        /* fallthrough, if we release the descriptors
+                         * brutally (then we don't care about
+                         * SPIDER_NET_DESCR_CARDOWNED) */
+                case SPIDER_NET_DESCR_RESPONSE_ERROR:
+                case SPIDER_NET_DESCR_PROTECTION_ERROR:
+                case SPIDER_NET_DESCR_FORCE_END:
+                        if (netif_msg_tx_err(card))
+                                pr_err("%s: forcing end of tx descriptor "
+                                       "with status x%02x\n",
+                                       card->netdev->name, status);
+                        card->netdev_stats.tx_errors++;
+                        break;
+                default:
+                        card->netdev_stats.tx_dropped++;
+                        return 1;
+                }
+                spider_net_release_tx_descr(card);
+        }
        return 0;
 }
@@ -896,18 +763,32 @@ spider_net_prepare_tx_descr(struct spider_net_card *card,
 * spider_net_kick_tx_dma writes the current tx chain head as start address
 * of the tx descriptor chain and enables the transmission DMA engine
 */
-static void
+static inline void
-spider_net_kick_tx_dma(struct spider_net_card *card,
+spider_net_kick_tx_dma(struct spider_net_card *card)
-                       struct spider_net_descr *descr)
 {
-        /* this is the only descriptor in the output chain.
+        struct spider_net_descr *descr;
-         * Enable TX DMA */
-        spider_net_write_reg(card, SPIDER_NET_GDTDCHA,
+        if (spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR) &
-                             descr->bus_addr);
+                        SPIDER_NET_TX_DMA_EN)
+                goto out;
-        spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
+        descr = card->tx_chain.tail;
-                             SPIDER_NET_DMA_TX_VALUE);
+        for (;;) {
+                if (spider_net_get_descr_status(descr) ==
+                                SPIDER_NET_DESCR_CARDOWNED) {
+                        spider_net_write_reg(card, SPIDER_NET_GDTDCHA,
+                                        descr->bus_addr);
+                        spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
+                                        SPIDER_NET_DMA_TX_VALUE);
+                        break;
+                }
+                if (descr == card->tx_chain.head)
+                        break;
+                descr = descr->next;
+        }
+out:
+        mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER);
 }
 /**
@@ -915,47 +796,69 @@ spider_net_kick_tx_dma(struct spider_net_card *card,
 * @skb: packet to send out
 * @netdev: interface device structure
 *
- * returns 0 on success, <0 on failure
+ * returns 0 on success, !0 on failure
 */
 static int
 spider_net_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
        struct spider_net_card *card = netdev_priv(netdev);
-        struct spider_net_descr *descr;
+        struct spider_net_descr_chain *chain = &card->tx_chain;
+        struct spider_net_descr *descr = chain->head;
+        unsigned long flags;
        int result;
+        spin_lock_irqsave(&chain->lock, flags);
        spider_net_release_tx_chain(card, 0);
-        descr = spider_net_get_next_tx_descr(card);
+        if (chain->head->next == chain->tail->prev) {
+                card->netdev_stats.tx_dropped++;
+                result = NETDEV_TX_LOCKED;
+                goto out;
+        }
-        if (!descr)
+        if (spider_net_get_descr_status(descr) != SPIDER_NET_DESCR_NOT_IN_USE) {
-                goto error;
+                result = NETDEV_TX_LOCKED;
+                goto out;
+        }
-        result = spider_net_prepare_tx_descr(card, descr, skb);
+        if (spider_net_prepare_tx_descr(card, skb) != 0) {
-        if (result)
+                card->netdev_stats.tx_dropped++;
-                goto error;
+                result = NETDEV_TX_BUSY;
+                goto out;
+        }
+        result = NETDEV_TX_OK;
+        spider_net_kick_tx_dma(card);
        card->tx_chain.head = card->tx_chain.head->next;
-        if (spider_net_get_descr_status(descr->prev) !=
+out:
-            SPIDER_NET_DESCR_CARDOWNED) {
+        spin_unlock_irqrestore(&chain->lock, flags);
-                /* make sure the current descriptor is in memory. Then
+        netif_wake_queue(netdev);
-                 * kicking it on again makes sense, if the previous is not
+        return result;
-                 * card-owned anymore. Check the previous descriptor twice
+}
-                 * to omit an mb() in heavy traffic cases */
-                mb();
-                if (spider_net_get_descr_status(descr->prev) !=
-                    SPIDER_NET_DESCR_CARDOWNED)
-                        spider_net_kick_tx_dma(card, descr);
-        }
-        mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER);
+/**
+ * spider_net_cleanup_tx_ring - cleans up the TX ring
+ * @card: card structure
+ *
+ * spider_net_cleanup_tx_ring is called by the tx_timer (as we don't use
+ * interrupts to cleanup our TX ring) and returns sent packets to the stack
+ * by freeing them
+ */
+static void
+spider_net_cleanup_tx_ring(struct spider_net_card *card)
+{
+        unsigned long flags;
-        return NETDEV_TX_OK;
+        spin_lock_irqsave(&card->tx_chain.lock, flags);
-error:
+        if ((spider_net_release_tx_chain(card, 0) != 0) &&
-        card->netdev_stats.tx_dropped++;
+            (card->netdev->flags & IFF_UP))
-        return NETDEV_TX_BUSY;
+                spider_net_kick_tx_dma(card);
+        spin_unlock_irqrestore(&card->tx_chain.lock, flags);
 }
 /**
@@ -1002,7 +905,7 @@ spider_net_pass_skb_up(struct spider_net_descr *descr,
        /* unmap descriptor */
        pci_unmap_single(card->pdev, descr->buf_addr, SPIDER_NET_MAX_FRAME,
-                         PCI_DMA_BIDIRECTIONAL);
+                        PCI_DMA_FROMDEVICE);
        /* the cases we'll throw away the packet immediately */
        if (data_error & SPIDER_NET_DESTROY_RX_FLAGS) {
@@ -1067,14 +970,11 @@ spider_net_pass_skb_up(struct spider_net_descr *descr,
 static int
 spider_net_decode_one_descr(struct spider_net_card *card, int napi)
 {
-        enum spider_net_descr_status status;
+        struct spider_net_descr_chain *chain = &card->rx_chain;
-        struct spider_net_descr *descr;
+        struct spider_net_descr *descr = chain->tail;
-        struct spider_net_descr_chain *chain;
+        int status;
        int result;
-        chain = &card->rx_chain;
-        descr = chain->tail;
        status = spider_net_get_descr_status(descr);
        if (status == SPIDER_NET_DESCR_CARDOWNED) {
@@ -1103,7 +1003,7 @@ spider_net_decode_one_descr(struct spider_net_card *card, int napi)
                               card->netdev->name, status);
                card->netdev_stats.rx_dropped++;
                pci_unmap_single(card->pdev, descr->buf_addr,
-                                 SPIDER_NET_MAX_FRAME, PCI_DMA_BIDIRECTIONAL);
+                                SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
                dev_kfree_skb_irq(descr->skb);
                goto refill;
        }
@@ -1119,7 +1019,7 @@ spider_net_decode_one_descr(struct spider_net_card *card, int napi)
        /* ok, we've got a packet in descr */
        result = spider_net_pass_skb_up(descr, card, napi);
 refill:
-        spider_net_set_descr_status(descr, SPIDER_NET_DESCR_NOT_IN_USE);
+        descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
        /* change the descriptor state: */
        if (!napi)
                spider_net_refill_rx_chain(card);
@@ -1291,21 +1191,6 @@ spider_net_set_mac(struct net_device *netdev, void *p)
 }
 /**
- * spider_net_enable_txdmac - enables a TX DMA controller
- * @card: card structure
- *
- * spider_net_enable_txdmac enables the TX DMA controller by setting the
- * descriptor chain tail address
- */
-static void
-spider_net_enable_txdmac(struct spider_net_card *card)
-{
-        /* assume chain is aligned correctly */
-        spider_net_write_reg(card, SPIDER_NET_GDTDCHA,
-                             card->tx_chain.tail->bus_addr);
-}
-/**
 * spider_net_handle_rxram_full - cleans up RX ring upon RX RAM full interrupt
 * @card: card structure
 *
@@ -1653,7 +1538,6 @@ spider_net_enable_card(struct spider_net_card *card)
                { SPIDER_NET_GMRWOLCTRL, 0 },
                { SPIDER_NET_GTESTMD, 0x10000000 },
                { SPIDER_NET_GTTQMSK, 0x00400040 },
-                { SPIDER_NET_GTESTMD, 0 },
                { SPIDER_NET_GMACINTEN, 0 },
@@ -1692,9 +1576,6 @@ spider_net_enable_card(struct spider_net_card *card)
        spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE);
-        /* set chain tail adress for TX chain */
-        spider_net_enable_txdmac(card);
        spider_net_write_reg(card, SPIDER_NET_GMACLENLMT,
                             SPIDER_NET_LENLMT_VALUE);
        spider_net_write_reg(card, SPIDER_NET_GMACMODE,
@@ -1709,6 +1590,9 @@ spider_net_enable_card(struct spider_net_card *card)
                             SPIDER_NET_INT1_MASK_VALUE);
        spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK,
                             SPIDER_NET_INT2_MASK_VALUE);
+        spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
+                             SPIDER_NET_GDTDCEIDIS);
 }
 /**
@@ -1728,10 +1612,12 @@ spider_net_open(struct net_device *netdev)
        result = -ENOMEM;
        if (spider_net_init_chain(card, &card->tx_chain,
-                          card->descr, tx_descriptors))
+                        card->descr,
+                        PCI_DMA_TODEVICE, tx_descriptors))
                goto alloc_tx_failed;
        if (spider_net_init_chain(card, &card->rx_chain,
-                          card->descr + tx_descriptors, rx_descriptors))
+                        card->descr + tx_descriptors,
+                        PCI_DMA_FROMDEVICE, rx_descriptors))
                goto alloc_rx_failed;
        /* allocate rx skbs */
@@ -1938,7 +1824,7 @@ spider_net_workaround_rxramfull(struct spider_net_card *card)
        /* empty sequencer data */
        for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
             sequencer++) {
-                spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
+                spider_net_write_reg(card, SPIDER_NET_GSnPRGADR +
                                     sequencer * 8, 0x0);
                for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
                        spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
@@ -1955,6 +1841,49 @@ spider_net_workaround_rxramfull(struct spider_net_card *card)
 }
 /**
+ * spider_net_stop - called upon ifconfig down
+ * @netdev: interface device structure
+ *
+ * always returns 0
+ */
+int
+spider_net_stop(struct net_device *netdev)
+{
+        struct spider_net_card *card = netdev_priv(netdev);
+        tasklet_kill(&card->rxram_full_tl);
+        netif_poll_disable(netdev);
+        netif_carrier_off(netdev);
+        netif_stop_queue(netdev);
+        del_timer_sync(&card->tx_timer);
+        /* disable/mask all interrupts */
+        spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
+        spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
+        spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
+        /* free_irq(netdev->irq, netdev);*/
+        free_irq(to_pci_dev(netdev->class_dev.dev)->irq, netdev);
+        spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
+                             SPIDER_NET_DMA_TX_FEND_VALUE);
+        /* turn off DMA, force end */
+        spider_net_disable_rxdmac(card);
+        /* release chains */
+        if (spin_trylock(&card->tx_chain.lock)) {
+                spider_net_release_tx_chain(card, 1);
+                spin_unlock(&card->tx_chain.lock);
+        }
+        spider_net_free_chain(card, &card->tx_chain);
+        spider_net_free_chain(card, &card->rx_chain);
+        return 0;
+}
+/**
 * spider_net_tx_timeout_task - task scheduled by the watchdog timeout
 * function (to be called not under interrupt status)
 * @data: data, is interface device structure
@@ -1982,7 +1911,7 @@ spider_net_tx_timeout_task(void *data)
                goto out;
        spider_net_open(netdev);
-        spider_net_kick_tx_dma(card, card->tx_chain.head);
+        spider_net_kick_tx_dma(card);
        netif_device_attach(netdev);
 out:
@@ -2065,7 +1994,6 @@ spider_net_setup_netdev(struct spider_net_card *card)
        pci_set_drvdata(card->pdev, netdev);
-        atomic_set(&card->tx_chain_release,0);
        card->rxram_full_tl.data = (unsigned long) card;
        card->rxram_full_tl.func =
                (void (*)(unsigned long)) spider_net_handle_rxram_full;
@@ -2079,7 +2007,7 @@ spider_net_setup_netdev(struct spider_net_card *card)
        spider_net_setup_netdev_ops(netdev);
-        netdev->features = NETIF_F_HW_CSUM;
+        netdev->features = NETIF_F_HW_CSUM | NETIF_F_LLTX;
        /* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
         *              NETIF_F_HW_VLAN_FILTER */
diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
index 3b8d951cf73c..f6dcf180ae3d 100644
--- a/drivers/net/spider_net.h
+++ b/drivers/net/spider_net.h
@@ -208,7 +208,10 @@ extern char spider_net_driver_name[];
 #define SPIDER_NET_DMA_RX_VALUE         0x80000000
 #define SPIDER_NET_DMA_RX_FEND_VALUE    0x00030003
 /* to set TX_DMA_EN */
-#define SPIDER_NET_DMA_TX_VALUE         0x80000000
+#define SPIDER_NET_TX_DMA_EN            0x80000000
+#define SPIDER_NET_GDTDCEIDIS           0x00000002
+#define SPIDER_NET_DMA_TX_VALUE         SPIDER_NET_TX_DMA_EN | \
+                                        SPIDER_NET_GDTDCEIDIS
 #define SPIDER_NET_DMA_TX_FEND_VALUE    0x00030003
 /* SPIDER_NET_UA_DESCR_VALUE is OR'ed with the unicast address */
@@ -329,55 +332,23 @@ enum spider_net_int2_status {
                                  (~SPIDER_NET_TXINT) & \
                                  (~SPIDER_NET_RXINT) )
-#define SPIDER_NET_GPREXEC              0x80000000
+#define SPIDER_NET_GPREXEC                      0x80000000
-#define SPIDER_NET_GPRDAT_MASK          0x0000ffff
+#define SPIDER_NET_GPRDAT_MASK                  0x0000ffff
-/* descriptor bits
+#define SPIDER_NET_DMAC_NOINTR_COMPLETE         0x00800000
- *
+#define SPIDER_NET_DMAC_NOCS                    0x00040000
- * 1010                                 descriptor ready
+#define SPIDER_NET_DMAC_TCP                     0x00020000
- *     0                                descr in middle of chain
+#define SPIDER_NET_DMAC_UDP                     0x00030000
- *      000                             fixed to 0
+#define SPIDER_NET_TXDCEST                      0x08000000
- *
- *         0                            no interrupt on completion
+#define SPIDER_NET_DESCR_IND_PROC_MASK          0xF0000000
- *          000                         fixed to 0
+#define SPIDER_NET_DESCR_COMPLETE               0x00000000 /* used in rx and tx */
- *             1                        no ipsec processing
+#define SPIDER_NET_DESCR_RESPONSE_ERROR         0x10000000 /* used in rx and tx */
- *              1                       last descriptor for this frame
+#define SPIDER_NET_DESCR_PROTECTION_ERROR       0x20000000 /* used in rx and tx */
- *               00                     no checksum
+#define SPIDER_NET_DESCR_FRAME_END              0x40000000 /* used in rx */
- *               10                     tcp checksum
+#define SPIDER_NET_DESCR_FORCE_END              0x50000000 /* used in rx and tx */
- *               11                     udp checksum
+#define SPIDER_NET_DESCR_CARDOWNED              0xA0000000 /* used in rx and tx */
- *
+#define SPIDER_NET_DESCR_NOT_IN_USE             0xF0000000
- *                 00                   fixed to 0
- *                   0                  fixed to 0
- *                    0                 no interrupt on response errors
- *                     0                no interrupt on invalid descr
- *                      0               no interrupt on dma process termination
- *                       0              no interrupt on descr chain end
- *                        0             no interrupt on descr complete
- *
- *                         000          fixed to 0
- *                            0         response error interrupt status
- *                             0        invalid descr status
- *                              0       dma termination status
- *                               0      descr chain end status
- *                                0     descr complete status */
-#define SPIDER_NET_DMAC_CMDSTAT_NOCS    0xa00c0000
-#define SPIDER_NET_DMAC_CMDSTAT_TCPCS   0xa00e0000
-#define SPIDER_NET_DMAC_CMDSTAT_UDPCS   0xa00f0000
-#define SPIDER_NET_DESCR_IND_PROC_SHIFT 28
-#define SPIDER_NET_DESCR_IND_PROC_MASKO 0x0fffffff
-/* descr ready, descr is in middle of chain, get interrupt on completion */
-#define SPIDER_NET_DMAC_RX_CARDOWNED    0xa0800000
-enum spider_net_descr_status {
-        SPIDER_NET_DESCR_COMPLETE               = 0x00, /* used in rx and tx */
-        SPIDER_NET_DESCR_RESPONSE_ERROR         = 0x01, /* used in rx and tx */
-        SPIDER_NET_DESCR_PROTECTION_ERROR       = 0x02, /* used in rx and tx */
-        SPIDER_NET_DESCR_FRAME_END              = 0x04, /* used in rx */
-        SPIDER_NET_DESCR_FORCE_END              = 0x05, /* used in rx and tx */
-        SPIDER_NET_DESCR_CARDOWNED              = 0x0a, /* used in rx and tx */
-        SPIDER_NET_DESCR_NOT_IN_USE /* any other value */
-};
 struct spider_net_descr {
        /* as defined by the hardware */
@@ -398,7 +369,7 @@ struct spider_net_descr {
 } __attribute__((aligned(32)));
 struct spider_net_descr_chain {
-        /* we walk from tail to head */
+        spinlock_t lock;
        struct spider_net_descr *head;
        struct spider_net_descr *tail;
 };
@@ -453,8 +424,6 @@ struct spider_net_card {
        struct spider_net_descr_chain tx_chain;
        struct spider_net_descr_chain rx_chain;
-        atomic_t rx_chain_refill;
-        atomic_t tx_chain_release;
        struct net_device_stats netdev_stats;
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index 8673fd4c08c7..c6f5bc3c042f 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -3255,12 +3255,7 @@ static void __devexit happy_meal_pci_remove(struct pci_dev *pdev)
 }
 static struct pci_device_id happymeal_pci_ids[] = {
-        {
+        { PCI_DEVICE(PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_HAPPYMEAL) },
-          .vendor       = PCI_VENDOR_ID_SUN,
-          .device       = PCI_DEVICE_ID_SUN_HAPPYMEAL,
-          .subvendor    = PCI_ANY_ID,
-          .subdevice    = PCI_ANY_ID,
-        },
        { }                     /* Terminating entry */
 };
@@ -3275,7 +3270,7 @@ static struct pci_driver hme_pci_driver = {
 static int __init happy_meal_pci_init(void)
 {
-        return pci_module_init(&hme_pci_driver);
+        return pci_register_driver(&hme_pci_driver);
 }
 static void happy_meal_pci_exit(void)
diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c
index 1ef9fd39a79a..0e3fdf7c6dd3 100644
--- a/drivers/net/sunlance.c
+++ b/drivers/net/sunlance.c
@@ -1537,7 +1537,7 @@ static int __init sparc_lance_init(void)
 {
        if ((idprom->id_machtype == (SM_SUN4|SM_4_330)) ||
            (idprom->id_machtype == (SM_SUN4|SM_4_470))) {
-                memset(&sun4_sdev, 0, sizeof(sdev));
+                memset(&sun4_sdev, 0, sizeof(struct sbus_dev));
                sun4_sdev.reg_addrs[0].phys_addr = sun4_eth_physaddr;
                sun4_sdev.irqs[0] = 6;
                return sparc_lance_probe_one(&sun4_sdev, NULL, NULL);
@@ -1547,16 +1547,16 @@ static int __init sparc_lance_init(void)
 static int __exit sunlance_sun4_remove(void)
 {
-        struct lance_private *lp = dev_get_drvdata(&sun4_sdev->dev);
+        struct lance_private *lp = dev_get_drvdata(&sun4_sdev.ofdev.dev);
        struct net_device *net_dev = lp->dev;
        unregister_netdevice(net_dev);
-        lance_free_hwresources(root_lance_dev);
+        lance_free_hwresources(lp);
        free_netdev(net_dev);
-        dev_set_drvdata(&sun4_sdev->dev, NULL);
+        dev_set_drvdata(&sun4_sdev.ofdev.dev, NULL);
        return 0;
 }
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f645921aff8b..1b8138f641e3 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
 #define DRV_MODULE_NAME         "tg3"
 #define PFX DRV_MODULE_NAME     ": "
-#define DRV_MODULE_VERSION      "3.62"
+#define DRV_MODULE_VERSION      "3.63"
-#define DRV_MODULE_RELDATE      "June 30, 2006"
+#define DRV_MODULE_RELDATE      "July 25, 2006"
 #define TG3_DEF_MAC_MODE        0
 #define TG3_DEF_RX_MODE         0
@@ -3590,6 +3590,28 @@ static irqreturn_t tg3_test_isr(int irq, void *dev_id,
 static int tg3_init_hw(struct tg3 *, int);
 static int tg3_halt(struct tg3 *, int, int);
+/* Restart hardware after configuration changes, self-test, etc.
+ * Invoked with tp->lock held.
+ */
+static int tg3_restart_hw(struct tg3 *tp, int reset_phy)
+{
+        int err;
+        err = tg3_init_hw(tp, reset_phy);
+        if (err) {
+                printk(KERN_ERR PFX "%s: Failed to re-initialize device, "
+                       "aborting.\n", tp->dev->name);
+                tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
+                tg3_full_unlock(tp);
+                del_timer_sync(&tp->timer);
+                tp->irq_sync = 0;
+                netif_poll_enable(tp->dev);
+                dev_close(tp->dev);
+                tg3_full_lock(tp, 0);
+        }
+        return err;
+}
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void tg3_poll_controller(struct net_device *dev)
 {
@@ -3630,13 +3652,15 @@ static void tg3_reset_task(void *_data)
        }
        tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
-        tg3_init_hw(tp, 1);
+        if (tg3_init_hw(tp, 1))
+                goto out;
        tg3_netif_start(tp);
        if (restart_timer)
                mod_timer(&tp->timer, jiffies + 1);
+out:
        tp->tg3_flags &= ~TG3_FLAG_IN_RESET_TASK;
        tg3_full_unlock(tp);
@@ -4124,6 +4148,7 @@ static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
 static int tg3_change_mtu(struct net_device *dev, int new_mtu)
 {
        struct tg3 *tp = netdev_priv(dev);
+        int err;
        if (new_mtu < TG3_MIN_MTU || new_mtu > TG3_MAX_MTU(tp))
                return -EINVAL;
@@ -4144,13 +4169,14 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu)
        tg3_set_mtu(dev, tp, new_mtu);
-        tg3_init_hw(tp, 0);
+        err = tg3_restart_hw(tp, 0);
-        tg3_netif_start(tp);
+        if (!err)
+                tg3_netif_start(tp);
        tg3_full_unlock(tp);
-        return 0;
+        return err;
 }
 /* Free up pending packets in all rx/tx rings.
@@ -4232,7 +4258,7 @@ static void tg3_free_rings(struct tg3 *tp)
 * end up in the driver.  tp->{tx,}lock are held and thus
 * we may not sleep.
 */
-static void tg3_init_rings(struct tg3 *tp)
+static int tg3_init_rings(struct tg3 *tp)
 {
        u32 i;
@@ -4281,18 +4307,38 @@ static void tg3_init_rings(struct tg3 *tp)
        /* Now allocate fresh SKBs for each rx ring. */
        for (i = 0; i < tp->rx_pending; i++) {
-                if (tg3_alloc_rx_skb(tp, RXD_OPAQUE_RING_STD,
+                if (tg3_alloc_rx_skb(tp, RXD_OPAQUE_RING_STD, -1, i) < 0) {
-                                     -1, i) < 0)
+                        printk(KERN_WARNING PFX
+                               "%s: Using a smaller RX standard ring, "
+                               "only %d out of %d buffers were allocated "
+                               "successfully.\n",
+                               tp->dev->name, i, tp->rx_pending);
+                        if (i == 0)
+                                return -ENOMEM;
+                        tp->rx_pending = i;
                        break;
+                }
        }
        if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
                for (i = 0; i < tp->rx_jumbo_pending; i++) {
                        if (tg3_alloc_rx_skb(tp, RXD_OPAQUE_RING_JUMBO,
-                                             -1, i) < 0)
+                                             -1, i) < 0) {
+                                printk(KERN_WARNING PFX
+                                       "%s: Using a smaller RX jumbo ring, "
+                                       "only %d out of %d buffers were "
+                                       "allocated successfully.\n",
+                                       tp->dev->name, i, tp->rx_jumbo_pending);
+                                if (i == 0) {
+                                        tg3_free_rings(tp);
+                                        return -ENOMEM;
+                                }
+                                tp->rx_jumbo_pending = i;
                                break;
+                        }
                }
        }
+        return 0;
 }
 /*
@@ -5815,6 +5861,7 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p)
 {
        struct tg3 *tp = netdev_priv(dev);
        struct sockaddr *addr = p;
+        int err = 0;
        if (!is_valid_ether_addr(addr->sa_data))
                return -EINVAL;
@@ -5832,9 +5879,9 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p)
                tg3_full_lock(tp, 1);
                tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-                tg3_init_hw(tp, 0);
+                err = tg3_restart_hw(tp, 0);
+                if (!err)
-                tg3_netif_start(tp);
+                        tg3_netif_start(tp);
                tg3_full_unlock(tp);
        } else {
                spin_lock_bh(&tp->lock);
@@ -5842,7 +5889,7 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p)
                spin_unlock_bh(&tp->lock);
        }
-        return 0;
+        return err;
 }
 /* tp->lock is held. */
@@ -5942,7 +5989,9 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
         * can only do this after the hardware has been
         * successfully reset.
         */
-        tg3_init_rings(tp);
+        err = tg3_init_rings(tp);
+        if (err)
+                return err;
        /* This value is determined during the probe time DMA
         * engine test, tg3_test_dma.
@@ -7956,7 +8005,7 @@ static void tg3_get_ringparam(struct net_device *dev, struct ethtool_ringparam *
 static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
 {
        struct tg3 *tp = netdev_priv(dev);
-        int irq_sync = 0;
+        int irq_sync = 0, err = 0;
  
        if ((ering->rx_pending > TG3_RX_RING_SIZE - 1) ||
            (ering->rx_jumbo_pending > TG3_RX_JUMBO_RING_SIZE - 1) ||
@@ -7980,13 +8029,14 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e
        if (netif_running(dev)) {
                tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-                tg3_init_hw(tp, 1);
+                err = tg3_restart_hw(tp, 1);
-                tg3_netif_start(tp);
+                if (!err)
+                        tg3_netif_start(tp);
        }
        tg3_full_unlock(tp);
  
-        return 0;
+        return err;
 }
  
 static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
@@ -8001,7 +8051,7 @@ static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam
 static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
 {
        struct tg3 *tp = netdev_priv(dev);
-        int irq_sync = 0;
+        int irq_sync = 0, err = 0;
  
        if (netif_running(dev)) {
                tg3_netif_stop(tp);
@@ -8025,13 +8075,14 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
        if (netif_running(dev)) {
                tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-                tg3_init_hw(tp, 1);
+                err = tg3_restart_hw(tp, 1);
-                tg3_netif_start(tp);
+                if (!err)
+                        tg3_netif_start(tp);
        }
        tg3_full_unlock(tp);
  
-        return 0;
+        return err;
 }
  
 static u32 tg3_get_rx_csum(struct net_device *dev)
@@ -8666,7 +8717,9 @@ static int tg3_test_loopback(struct tg3 *tp)
        if (!netif_running(tp->dev))
                return TG3_LOOPBACK_FAILED;
-        tg3_reset_hw(tp, 1);
+        err = tg3_reset_hw(tp, 1);
+        if (err)
+                return TG3_LOOPBACK_FAILED;
        if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK))
                err |= TG3_MAC_LOOPBACK_FAILED;
@@ -8740,8 +8793,8 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
                tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
                if (netif_running(dev)) {
                        tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-                        tg3_init_hw(tp, 1);
+                        if (!tg3_restart_hw(tp, 1))
-                        tg3_netif_start(tp);
+                                tg3_netif_start(tp);
                }
                tg3_full_unlock(tp);
@@ -10078,6 +10131,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
        static struct pci_device_id write_reorder_chipsets[] = {
                { PCI_DEVICE(PCI_VENDOR_ID_AMD,
                             PCI_DEVICE_ID_AMD_FE_GATE_700C) },
+                { PCI_DEVICE(PCI_VENDOR_ID_AMD,
+                             PCI_DEVICE_ID_AMD_8131_BRIDGE) },
                { PCI_DEVICE(PCI_VENDOR_ID_VIA,
                             PCI_DEVICE_ID_VIA_8385_0) },
                { },
@@ -11697,7 +11752,8 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
                tg3_full_lock(tp, 0);
                tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-                tg3_init_hw(tp, 1);
+                if (tg3_restart_hw(tp, 1))
+                        goto out;
                tp->timer.expires = jiffies + tp->timer_offset;
                add_timer(&tp->timer);
@@ -11705,6 +11761,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
                netif_device_attach(dev);
                tg3_netif_start(tp);
+out:
                tg3_full_unlock(tp);
        }
@@ -11731,16 +11788,19 @@ static int tg3_resume(struct pci_dev *pdev)
        tg3_full_lock(tp, 0);
        tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-        tg3_init_hw(tp, 1);
+        err = tg3_restart_hw(tp, 1);
+        if (err)
+                goto out;
        tp->timer.expires = jiffies + tp->timer_offset;
        add_timer(&tp->timer);
        tg3_netif_start(tp);
+out:
        tg3_full_unlock(tp);
-        return 0;
+        return err;
 }
 static struct pci_driver tg3_driver = {
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 063816f2b11e..4103c37172f9 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -805,7 +805,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
         * If problems develop with TSO, check this first.
         */
        numDesc = skb_shinfo(skb)->nr_frags + 1;
-        if(skb_tso_size(skb))
+        if (skb_is_gso(skb))
                numDesc++;
        /* When checking for free space in the ring, we need to also
@@ -845,7 +845,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
                                TYPHOON_TX_PF_VLAN_TAG_SHIFT);
        }
-        if(skb_tso_size(skb)) {
+        if (skb_is_gso(skb)) {
                first_txd->processFlags |= TYPHOON_TX_PF_TCP_SEGMENT;
                first_txd->numDesc++;
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index f5b0078eb4ad..aa9cd92f46b2 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -2742,7 +2742,7 @@ static u32 check_connection_type(struct mac_regs __iomem * regs)
        if (PHYSR0 & PHYSR0_SPDG)
                status |= VELOCITY_SPEED_1000;
-        if (PHYSR0 & PHYSR0_SPD10)
+        else if (PHYSR0 & PHYSR0_SPD10)
                status |= VELOCITY_SPEED_10;
        else
                status |= VELOCITY_SPEED_100;
@@ -2851,8 +2851,17 @@ static int velocity_get_settings(struct net_device *dev, struct ethtool_cmd *cmd
        u32 status;
        status = check_connection_type(vptr->mac_regs);
-        cmd->supported = SUPPORTED_TP | SUPPORTED_Autoneg | SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full;
+        cmd->supported = SUPPORTED_TP |
-        if (status & VELOCITY_SPEED_100)
+                        SUPPORTED_Autoneg |
+                        SUPPORTED_10baseT_Half |
+                        SUPPORTED_10baseT_Full |
+                        SUPPORTED_100baseT_Half |
+                        SUPPORTED_100baseT_Full |
+                        SUPPORTED_1000baseT_Half |
+                        SUPPORTED_1000baseT_Full;
+        if (status & VELOCITY_SPEED_1000)
+                cmd->speed = SPEED_1000;
+        else if (status & VELOCITY_SPEED_100)
                cmd->speed = SPEED_100;
        else
                cmd->speed = SPEED_10;
@@ -2896,7 +2905,7 @@ static u32 velocity_get_link(struct net_device *dev)
 {
        struct velocity_info *vptr = netdev_priv(dev);
        struct mac_regs __iomem * regs = vptr->mac_regs;
-        return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, &regs->PHYSR0)  ? 0 : 1;
+        return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, &regs->PHYSR0) ? 1 : 0;
 }
 static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c
index c92ac9fde083..435e91ec4620 100644
--- a/drivers/net/wan/c101.c
+++ b/drivers/net/wan/c101.c
@@ -116,27 +116,33 @@ static inline void openwin(card_t *card, u8 page)
 #include "hd6457x.c"
+static inline void set_carrier(port_t *port)
+{
+        if (!sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD)
+                netif_carrier_on(port_to_dev(port));
+        else
+                netif_carrier_off(port_to_dev(port));
+}
 static void sca_msci_intr(port_t *port)
 {
-        struct net_device *dev = port_to_dev(port);
+        u8 stat = sca_in(MSCI1_OFFSET + ST1, port); /* read MSCI ST1 status */
-        card_t* card = port_to_card(port);
-        u8 stat = sca_in(MSCI1_OFFSET + ST1, card); /* read MSCI ST1 status */
        /* Reset MSCI TX underrun status bit */
-        sca_out(stat & ST1_UDRN, MSCI0_OFFSET + ST1, card);
+        sca_out(stat & ST1_UDRN, MSCI0_OFFSET + ST1, port);
        if (stat & ST1_UDRN) {
-                struct net_device_stats *stats = hdlc_stats(dev);
+                struct net_device_stats *stats = hdlc_stats(port_to_dev(port));
                stats->tx_errors++; /* TX Underrun error detected */
                stats->tx_fifo_errors++;
        }
        /* Reset MSCI CDCD status bit - uses ch#2 DCD input */
-        sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, card);
+        sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, port);
        if (stat & ST1_CDCD)
-                hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, card) & ST3_DCD),
+                set_carrier(port);
-                                 dev);
 }
@@ -190,8 +196,7 @@ static int c101_open(struct net_device *dev)
        sca_out(IE1_UDRN, MSCI0_OFFSET + IE1, port);
        sca_out(IE0_TXINT, MSCI0_OFFSET + IE0, port);
-        hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD), dev);
+        set_carrier(port);
-        printk(KERN_DEBUG "0x%X\n", sca_in(MSCI1_OFFSET + ST3, port));
        /* enable MSCI1 CDCD interrupt */
        sca_out(IE1_CDCD, MSCI1_OFFSET + IE1, port);
@@ -378,7 +383,7 @@ static int __init c101_run(unsigned long irq, unsigned long winbase)
        }
        sca_init_sync_port(card); /* Set up C101 memory */
-        hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, card) & ST3_DCD), dev);
+        set_carrier(card);
        printk(KERN_INFO "%s: Moxa C101 on IRQ%u,"
               " using %u TX + %u RX packets rings\n",
@@ -443,4 +448,5 @@ module_exit(c101_cleanup);
 MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
 MODULE_DESCRIPTION("Moxa C101 serial port driver");
 MODULE_LICENSE("GPL v2");
-module_param(hw, charp, 0444);  /* hw=irq,ram:irq,... */
+module_param(hw, charp, 0444);
+MODULE_PARM_DESC(hw, "irq,ram:irq,...");
diff --git a/drivers/net/wan/hd6457x.c b/drivers/net/wan/hd6457x.c
index d3743321a977..dce2bb317b82 100644
--- a/drivers/net/wan/hd6457x.c
+++ b/drivers/net/wan/hd6457x.c
@@ -168,6 +168,23 @@ static inline u32 buffer_offset(port_t *port, u16 desc, int transmit)
 }
+static inline void sca_set_carrier(port_t *port)
+{
+        if (!(sca_in(get_msci(port) + ST3, port_to_card(port)) & ST3_DCD)) {
+#ifdef DEBUG_LINK
+                printk(KERN_DEBUG "%s: sca_set_carrier on\n",
+                       port_to_dev(port)->name);
+#endif
+                netif_carrier_on(port_to_dev(port));
+        } else {
+#ifdef DEBUG_LINK
+                printk(KERN_DEBUG "%s: sca_set_carrier off\n",
+                       port_to_dev(port)->name);
+#endif
+                netif_carrier_off(port_to_dev(port));
+        }
+}
 static void sca_init_sync_port(port_t *port)
 {
@@ -237,9 +254,7 @@ static void sca_init_sync_port(port_t *port)
                        sca_out(DIR_BOFE, DIR_TX(phy_node(port)), card);
                }
        }
+        sca_set_carrier(port);
-        hdlc_set_carrier(!(sca_in(get_msci(port) + ST3, card) & ST3_DCD),
-                         port_to_dev(port));
 }
@@ -262,8 +277,7 @@ static inline void sca_msci_intr(port_t *port)
        }
        if (stat & ST1_CDCD)
-                hdlc_set_carrier(!(sca_in(msci + ST3, card) & ST3_DCD),
+                sca_set_carrier(port);
-                                 port_to_dev(port));
 }
 #endif
@@ -566,7 +580,7 @@ static void sca_open(struct net_device *dev)
   - all DMA interrupts
 */
-        hdlc_set_carrier(!(sca_in(msci + ST3, card) & ST3_DCD), dev);
+        sca_set_carrier(port);
 #ifdef __HD64570_H
        /* MSCI TX INT and RX INT A IRQ enable */
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index 1fd04662c4fc..f289daba0c7b 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -192,9 +192,7 @@ static int cisco_rx(struct sk_buff *skb)
                                               "uptime %ud%uh%um%us)\n",
                                               dev->name, days, hrs,
                                               min, sec);
-#if 0
+                                        netif_dormant_off(dev);
-                                        netif_carrier_on(dev);
-#endif
                                        hdlc->state.cisco.up = 1;
                                }
                        }
@@ -227,9 +225,7 @@ static void cisco_timer(unsigned long arg)
                       hdlc->state.cisco.settings.timeout * HZ)) {
                hdlc->state.cisco.up = 0;
                printk(KERN_INFO "%s: Link down\n", dev->name);
-#if 0
+                netif_dormant_on(dev);
-                netif_carrier_off(dev);
-#endif
        }
        cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ,
@@ -265,10 +261,7 @@ static void cisco_stop(struct net_device *dev)
 {
        hdlc_device *hdlc = dev_to_hdlc(dev);
        del_timer_sync(&hdlc->state.cisco.timer);
-#if 0
+        netif_dormant_on(dev);
-        if (netif_carrier_ok(dev))
-                netif_carrier_off(dev);
-#endif
        hdlc->state.cisco.up = 0;
        hdlc->state.cisco.request_sent = 0;
 }
@@ -328,6 +321,7 @@ int hdlc_cisco_ioctl(struct net_device *dev, struct ifreq *ifr)
                dev->type = ARPHRD_CISCO;
                dev->flags = IFF_POINTOPOINT | IFF_NOARP;
                dev->addr_len = 0;
+                netif_dormant_on(dev);
                return 0;
        }
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 523afe17564e..7bb737bbdeb9 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -301,7 +301,7 @@ static int pvc_open(struct net_device *dev)
        if (pvc->open_count++ == 0) {
                hdlc_device *hdlc = dev_to_hdlc(pvc->master);
                if (hdlc->state.fr.settings.lmi == LMI_NONE)
-                        pvc->state.active = hdlc->carrier;
+                        pvc->state.active = netif_carrier_ok(pvc->master);
                pvc_carrier(pvc->state.active, pvc);
                hdlc->state.fr.dce_changed = 1;
@@ -545,11 +545,7 @@ static void fr_set_link_state(int reliable, struct net_device *dev)
        hdlc->state.fr.reliable = reliable;
        if (reliable) {
-#if 0
+                netif_dormant_off(dev);
-                if (!netif_carrier_ok(dev))
-                        netif_carrier_on(dev);
-#endif
                hdlc->state.fr.n391cnt = 0; /* Request full status */
                hdlc->state.fr.dce_changed = 1;
@@ -562,11 +558,7 @@ static void fr_set_link_state(int reliable, struct net_device *dev)
                        }
                }
        } else {
-#if 0
+                netif_dormant_on(dev);
-                if (netif_carrier_ok(dev))
-                        netif_carrier_off(dev);
-#endif
                while (pvc) {           /* Deactivate all PVCs */
                        pvc_carrier(0, pvc);
                        pvc->state.exist = pvc->state.active = 0;
diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc_generic.c
index b7da55140fbd..04ca1f7b6424 100644
--- a/drivers/net/wan/hdlc_generic.c
+++ b/drivers/net/wan/hdlc_generic.c
@@ -34,10 +34,11 @@
 #include <linux/inetdevice.h>
 #include <linux/lapb.h>
 #include <linux/rtnetlink.h>
+#include <linux/notifier.h>
 #include <linux/hdlc.h>
-static const char* version = "HDLC support module revision 1.18";
+static const char* version = "HDLC support module revision 1.19";
 #undef DEBUG_LINK
@@ -73,57 +74,51 @@ static int hdlc_rcv(struct sk_buff *skb, struct net_device *dev,
-static void __hdlc_set_carrier_on(struct net_device *dev)
+static inline void hdlc_proto_start(struct net_device *dev)
 {
        hdlc_device *hdlc = dev_to_hdlc(dev);
        if (hdlc->proto.start)
                return hdlc->proto.start(dev);
-#if 0
-#ifdef DEBUG_LINK
-        if (netif_carrier_ok(dev))
-                printk(KERN_ERR "hdlc_set_carrier_on(): already on\n");
-#endif
-        netif_carrier_on(dev);
-#endif
 }
-static void __hdlc_set_carrier_off(struct net_device *dev)
+static inline void hdlc_proto_stop(struct net_device *dev)
 {
        hdlc_device *hdlc = dev_to_hdlc(dev);
        if (hdlc->proto.stop)
                return hdlc->proto.stop(dev);
-#if 0
-#ifdef DEBUG_LINK
-        if (!netif_carrier_ok(dev))
-                printk(KERN_ERR "hdlc_set_carrier_off(): already off\n");
-#endif
-        netif_carrier_off(dev);
-#endif
 }
-void hdlc_set_carrier(int on, struct net_device *dev)
+static int hdlc_device_event(struct notifier_block *this, unsigned long event,
+                             void *ptr)
 {
-        hdlc_device *hdlc = dev_to_hdlc(dev);
+        struct net_device *dev = ptr;
+        hdlc_device *hdlc;
        unsigned long flags;
-        on = on ? 1 : 0;
+        int on;
+ 
+        if (dev->get_stats != hdlc_get_stats)
+                return NOTIFY_DONE; /* not an HDLC device */
+ 
+        if (event != NETDEV_CHANGE)
+                return NOTIFY_DONE; /* Only interrested in carrier changes */
+        on = netif_carrier_ok(dev);
 #ifdef DEBUG_LINK
-        printk(KERN_DEBUG "hdlc_set_carrier %i\n", on);
+        printk(KERN_DEBUG "%s: hdlc_device_event NETDEV_CHANGE, carrier %i\n",
+               dev->name, on);
 #endif
+        hdlc = dev_to_hdlc(dev);
        spin_lock_irqsave(&hdlc->state_lock, flags);
        if (hdlc->carrier == on)
                goto carrier_exit; /* no change in DCD line level */
-#ifdef DEBUG_LINK
-        printk(KERN_INFO "%s: carrier %s\n", dev->name, on ? "ON" : "off");
-#endif
        hdlc->carrier = on;
        if (!hdlc->open)
@@ -131,14 +126,15 @@ void hdlc_set_carrier(int on, struct net_device *dev)
        if (hdlc->carrier) {
                printk(KERN_INFO "%s: Carrier detected\n", dev->name);
-                __hdlc_set_carrier_on(dev);
+                hdlc_proto_start(dev);
        } else {
                printk(KERN_INFO "%s: Carrier lost\n", dev->name);
-                __hdlc_set_carrier_off(dev);
+                hdlc_proto_stop(dev);
        }
 carrier_exit:
        spin_unlock_irqrestore(&hdlc->state_lock, flags);
+        return NOTIFY_DONE;
 }
@@ -165,7 +161,7 @@ int hdlc_open(struct net_device *dev)
        if (hdlc->carrier) {
                printk(KERN_INFO "%s: Carrier detected\n", dev->name);
-                __hdlc_set_carrier_on(dev);
+                hdlc_proto_start(dev);
        } else
                printk(KERN_INFO "%s: No carrier\n", dev->name);
@@ -190,7 +186,7 @@ void hdlc_close(struct net_device *dev)
        hdlc->open = 0;
        if (hdlc->carrier)
-                __hdlc_set_carrier_off(dev);
+                hdlc_proto_stop(dev);
        spin_unlock_irq(&hdlc->state_lock);
@@ -303,7 +299,6 @@ MODULE_LICENSE("GPL v2");
 EXPORT_SYMBOL(hdlc_open);
 EXPORT_SYMBOL(hdlc_close);
-EXPORT_SYMBOL(hdlc_set_carrier);
 EXPORT_SYMBOL(hdlc_ioctl);
 EXPORT_SYMBOL(hdlc_setup);
 EXPORT_SYMBOL(alloc_hdlcdev);
@@ -315,9 +310,18 @@ static struct packet_type hdlc_packet_type = {
 };
+static struct notifier_block hdlc_notifier = {
+        .notifier_call = hdlc_device_event,
+};
 static int __init hdlc_module_init(void)
 {
+        int result;
        printk(KERN_INFO "%s\n", version);
+        if ((result = register_netdevice_notifier(&hdlc_notifier)) != 0)
+                return result;
        dev_add_pack(&hdlc_packet_type);
        return 0;
 }
@@ -327,6 +331,7 @@ static int __init hdlc_module_init(void)
 static void __exit hdlc_module_exit(void)
 {
        dev_remove_pack(&hdlc_packet_type);
+        unregister_netdevice_notifier(&hdlc_notifier);
 }
diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c
index b81263eaede0..fbaab5bf71eb 100644
--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -107,6 +107,7 @@ int hdlc_ppp_ioctl(struct net_device *dev, struct ifreq *ifr)
                dev->hard_header = NULL;
                dev->type = ARPHRD_PPP;
                dev->addr_len = 0;
+                netif_dormant_off(dev);
                return 0;
        }
diff --git a/drivers/net/wan/hdlc_raw.c b/drivers/net/wan/hdlc_raw.c
index 9456d31cb1c1..f15aa6ba77f1 100644
--- a/drivers/net/wan/hdlc_raw.c
+++ b/drivers/net/wan/hdlc_raw.c
@@ -82,6 +82,7 @@ int hdlc_raw_ioctl(struct net_device *dev, struct ifreq *ifr)
                dev->type = ARPHRD_RAWHDLC;
                dev->flags = IFF_POINTOPOINT | IFF_NOARP;
                dev->addr_len = 0;
+                netif_dormant_off(dev);
                return 0;
        }
diff --git a/drivers/net/wan/hdlc_raw_eth.c b/drivers/net/wan/hdlc_raw_eth.c
index b1285cc8fee6..d1884987f94e 100644
--- a/drivers/net/wan/hdlc_raw_eth.c
+++ b/drivers/net/wan/hdlc_raw_eth.c
@@ -100,6 +100,7 @@ int hdlc_raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr)
                dev->tx_queue_len = old_qlen;
                memcpy(dev->dev_addr, "\x00\x01", 2);
                get_random_bytes(dev->dev_addr + 2, ETH_ALEN - 2);
+                netif_dormant_off(dev);
                return 0;
        }
diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c
index 07e5eef1fe0f..a867fb411f89 100644
--- a/drivers/net/wan/hdlc_x25.c
+++ b/drivers/net/wan/hdlc_x25.c
@@ -212,6 +212,7 @@ int hdlc_x25_ioctl(struct net_device *dev, struct ifreq *ifr)
                dev->hard_header = NULL;
                dev->type = ARPHRD_X25;
                dev->addr_len = 0;
+                netif_dormant_off(dev);
                return 0;
        }
diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c
index e013b817cab8..dcf46add3adf 100644
--- a/drivers/net/wan/n2.c
+++ b/drivers/net/wan/n2.c
@@ -564,4 +564,5 @@ module_exit(n2_cleanup);
 MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
 MODULE_DESCRIPTION("RISCom/N2 serial port driver");
 MODULE_LICENSE("GPL v2");
-module_param(hw, charp, 0444);  /* hw=io,irq,ram,ports:io,irq,... */
+module_param(hw, charp, 0444);
+MODULE_PARM_DESC(hw, "io,irq,ram,ports:io,irq,...");
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index d564224cdca9..b2031dfc4bb1 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -149,7 +149,10 @@ static inline void wanxl_cable_intr(port_t *port)
        printk(KERN_INFO "%s: %s%s module, %s cable%s%s\n",
               port->dev->name, pm, dte, cable, dsr, dcd);
-        hdlc_set_carrier(value & STATUS_CABLE_DCD, port->dev);
+        if (value & STATUS_CABLE_DCD)
+                netif_carrier_on(port->dev);
+        else
+                netif_carrier_off(port->dev);
 }
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index fa9d2c4edc93..2e8ac995d56f 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -447,6 +447,7 @@ config AIRO_CS
        tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
        depends on NET_RADIO && PCMCIA && (BROKEN || !M32R)
        select CRYPTO
+        select CRYPTO_AES
        ---help---
          This is the standard Linux driver to support Cisco/Aironet PCMCIA
          802.11 wireless cards.  This driver is the same as the Aironet
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index e1c5a939bca4..df317c1e12a8 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -1547,7 +1547,7 @@ static void handle_irq_noise(struct bcm43xx_private *bcm)
                goto generate_new;
        /* Get the noise samples. */
-        assert(bcm->noisecalc.nr_samples <= 8);
+        assert(bcm->noisecalc.nr_samples < 8);
        i = bcm->noisecalc.nr_samples;
        noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
        noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
@@ -3701,7 +3701,7 @@ static void bcm43xx_ieee80211_set_security(struct net_device *net_dev,
        }
        if (sec->flags & SEC_AUTH_MODE) {
                secinfo->auth_mode = sec->auth_mode;
-                dprintk(", .auth_mode = %d\n", sec->auth_mode);
+                dprintk(", .auth_mode = %d", sec->auth_mode);
        }
        dprintk("\n");
        if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED &&
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index d6ed5781b93a..317ace7f9aae 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -2875,7 +2875,7 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev,
        if (orinoco_lock(priv, &flags) != 0)
                return -EBUSY;
-        if (erq->pointer) {
+        if (erq->length > 0) {
                if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
                        index = priv->tx_key;
@@ -2918,7 +2918,7 @@ static int orinoco_ioctl_setiwencode(struct net_device *dev,
        if (erq->flags & IW_ENCODE_RESTRICTED)
                restricted = 1;
-        if (erq->pointer) {
+        if (erq->pointer && erq->length > 0) {
                priv->keys[index].len = cpu_to_le16(xlen);
                memset(priv->keys[index].data, 0,
                       sizeof(priv->keys[index].data));
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 15465278c789..7f78b7801fb3 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -34,8 +34,6 @@
 #include "orinoco.h"
-static unsigned char *primsym;
-static unsigned char *secsym;
 static const char primary_fw_name[] = "symbol_sp24t_prim_fw";
 static const char secondary_fw_name[] = "symbol_sp24t_sec_fw";
@@ -440,7 +438,7 @@ spectrum_load_blocks(hermes_t *hw, const struct dblock *first_block)
 */
 static int
 spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
-                  const unsigned char *image)
+                  const unsigned char *image, int secondary)
 {
        int ret;
        const unsigned char *ptr;
@@ -455,7 +453,7 @@ spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
        first_block = (const struct dblock *) ptr;
        /* Read the PDA */
-        if (image != primsym) {
+        if (secondary) {
                ret = spectrum_read_pda(hw, pda, sizeof(pda));
                if (ret)
                        return ret;
@@ -472,7 +470,7 @@ spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
                return ret;
        /* Write the PDA to the adapter */
-        if (image != primsym) {
+        if (secondary) {
                ret = spectrum_apply_pda(hw, first_block, pda);
                if (ret)
                        return ret;
@@ -487,7 +485,7 @@ spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
        ret = hermes_init(hw);
        /* hermes_reset() should return 0 with the secondary firmware */
-        if (image != primsym && ret != 0)
+        if (secondary && ret != 0)
                return -ENODEV;
        /* And this should work with any firmware */
@@ -509,33 +507,30 @@ spectrum_dl_firmware(hermes_t *hw, struct pcmcia_device *link)
        const struct firmware *fw_entry;
        if (request_firmware(&fw_entry, primary_fw_name,
-                             &handle_to_dev(link)) == 0) {
+                             &handle_to_dev(link)) != 0) {
-                primsym = fw_entry->data;
-        } else {
                printk(KERN_ERR PFX "Cannot find firmware: %s\n",
                       primary_fw_name);
                return -ENOENT;
        }
-        if (request_firmware(&fw_entry, secondary_fw_name,
-                             &handle_to_dev(link)) == 0) {
-                secsym = fw_entry->data;
-        } else {
-                printk(KERN_ERR PFX "Cannot find firmware: %s\n",
-                       secondary_fw_name);
-                return -ENOENT;
-        }
        /* Load primary firmware */
-        ret = spectrum_dl_image(hw, link, primsym);
+        ret = spectrum_dl_image(hw, link, fw_entry->data, 0);
+        release_firmware(fw_entry);
        if (ret) {
                printk(KERN_ERR PFX "Primary firmware download failed\n");
                return ret;
        }
-        /* Load secondary firmware */
+        if (request_firmware(&fw_entry, secondary_fw_name,
-        ret = spectrum_dl_image(hw, link, secsym);
+                             &handle_to_dev(link)) != 0) {
+                printk(KERN_ERR PFX "Cannot find firmware: %s\n",
+                       secondary_fw_name);
+                return -ENOENT;
+        }
+        /* Load secondary firmware */
+        ret = spectrum_dl_image(hw, link, fw_entry->data, 1);
+        release_firmware(fw_entry);
        if (ret) {
                printk(KERN_ERR PFX "Secondary firmware download failed\n");
        }
diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c
index 662ecc8a33ff..c52e9bcf8d02 100644
--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -1820,6 +1820,8 @@ static int zd1201_probe(struct usb_interface *interface,
            zd->dev->name);
        usb_set_intfdata(interface, zd);
+        zd1201_enable(zd);      /* zd1201 likes to startup enabled, */
+        zd1201_disable(zd);     /* interfering with all the wifis in range */
        return 0;
 err_net:
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index ce1cb2c6aa8d..72f90525bf68 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -375,10 +375,8 @@ static void int_urb_complete(struct urb *urb, struct pt_regs *pt_regs)
        case -ENODEV:
        case -ENOENT:
        case -ECONNRESET:
-                goto kfree;
        case -EPIPE:
-                usb_clear_halt(urb->dev, EP_INT_IN);
+                goto kfree;
-                /* FALL-THROUGH */
        default:
                goto resubmit;
        }
@@ -580,10 +578,8 @@ static void rx_urb_complete(struct urb *urb, struct pt_regs *pt_regs)
        case -ENODEV:
        case -ENOENT:
        case -ECONNRESET:
-                return;
        case -EPIPE:
-                usb_clear_halt(urb->dev, EP_DATA_IN);
+                return;
-                /* FALL-THROUGH */
        default:
                dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
                goto resubmit;
@@ -749,11 +745,9 @@ static void tx_urb_complete(struct urb *urb, struct pt_regs *pt_regs)
        case -ENODEV:
        case -ENOENT:
        case -ECONNRESET:
+        case -EPIPE:
                dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
                break;
-        case -EPIPE:
-                usb_clear_halt(urb->dev, EP_DATA_OUT);
-                /* FALL-THROUGH */
        default:
                dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
                goto resubmit;