1 files changed, 7 insertions, 2 deletions

diff --git a/drivers/net/lance.c b/drivers/net/lance.c
index d1d714faa6ce..bb5ad479210b 100644
--- a/drivers/net/lance.c
+++ b/drivers/net/lance.c
@@ -464,20 +464,25 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int
         static int did_version;                 /* Already printed version info. */
         unsigned long flags;
         int err = -ENOMEM;
+        void __iomem *bios;
 
         /* First we look for special cases.
            Check for HP's on-board ethernet by looking for 'HP' in the BIOS.
            There are two HP versions, check the BIOS for the configuration port.
            This method provided by L. Julliard, Laurent_Julliard@grenoble.hp.com.
            */
-        if (isa_readw(0x000f0102) == 0x5048)  {
+        bios = ioremap(0xf00f0, 0x14);
+        if (!bios)
+                return -ENOMEM;
+        if (readw(bios + 0x12) == 0x5048)  {
                 static const short ioaddr_table[] = { 0x300, 0x320, 0x340, 0x360};
-                int hp_port = (isa_readl(0x000f00f1) & 1)  ? 0x499 : 0x99;
+                int hp_port = (readl(bios + 1) & 1)  ? 0x499 : 0x99;
                 /* We can have boards other than the built-in!  Verify this is on-board. */
                 if ((inb(hp_port) & 0xc0) == 0x80
                         && ioaddr_table[inb(hp_port) & 3] == ioaddr)
                         hp_builtin = hp_port;
         }
+        iounmap(bios);
         /* We also recognize the HP Vectra on-board here, but check below. */
         hpJ2405A = (inb(ioaddr) == 0x08 && inb(ioaddr+1) == 0x00
                                 && inb(ioaddr+2) == 0x09);