15 files changed, 15837 insertions, 0 deletions

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 2c08c0a5a0df..50a8b6c2fa00 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -648,6 +648,23 @@ config P54_PCI
 
           If you choose to build a module, it'll be called p54pci.
 
+config ATH5K
+        tristate "Atheros 5xxx wireless cards support"
+        depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+        ---help---
+          This module adds support for wireless adapters based on
+          Atheros 5xxx chipset.
+
+          Currently the following chip versions are supported:
+
+          MAC: AR5211 AR5212
+          PHY: RF5111/2111 RF5112/2112 RF5413/2413
+
+          This driver uses the kernel's mac80211 subsystem.
+
+          If you choose to build a module, it'll be called ath5k. Say M if
+          unsure.
+
 source "drivers/net/wireless/iwlwifi/Kconfig"
 source "drivers/net/wireless/hostap/Kconfig"
 source "drivers/net/wireless/bcm43xx/Kconfig"
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index d48f7d19745b..7e1535ece17a 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -59,3 +59,5 @@ obj-$(CONFIG_RT2X00)	+= rt2x00/
 obj-$(CONFIG_P54_COMMON)        += p54common.o
 obj-$(CONFIG_P54_USB)           += p54usb.o
 obj-$(CONFIG_P54_PCI)           += p54pci.o
+
+obj-$(CONFIG_ATH5K)     += ath5k/
diff --git a/drivers/net/wireless/ath5k/Makefile b/drivers/net/wireless/ath5k/Makefile
new file mode 100644
index 000000000000..321641f99e13
--- /dev/null
+++ b/drivers/net/wireless/ath5k/Makefile
@@ -0,0 +1,2 @@
+ath5k-objs              = base.o hw.o regdom.o initvals.o phy.o debug.o
+obj-$(CONFIG_ATH5K)     += ath5k.o
diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h
new file mode 100644
index 000000000000..878609f1bf39
--- /dev/null
+++ b/drivers/net/wireless/ath5k/ath5k.h
@@ -0,0 +1,1173 @@
+/*
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _ATH5K_H
+#define _ATH5K_H
+
+/* Set this to 1 to disable regulatory domain restrictions for channel tests.
+ * WARNING: This is for debuging only and has side effects (eg. scan takes too
+ * long and results timeouts). It's also illegal to tune to some of the
+ * supported frequencies in some countries, so use this at your own risk,
+ * you've been warned. */
+#define CHAN_DEBUG      0
+
+#include <linux/io.h>
+#include <linux/types.h>
+#include <net/mac80211.h>
+
+#include "hw.h"
+#include "regdom.h"
+
+/* PCI IDs */
+#define PCI_DEVICE_ID_ATHEROS_AR5210            0x0007 /* AR5210 */
+#define PCI_DEVICE_ID_ATHEROS_AR5311            0x0011 /* AR5311 */
+#define PCI_DEVICE_ID_ATHEROS_AR5211            0x0012 /* AR5211 */
+#define PCI_DEVICE_ID_ATHEROS_AR5212            0x0013 /* AR5212 */
+#define PCI_DEVICE_ID_3COM_3CRDAG675            0x0013 /* 3CRDAG675 (Atheros AR5212) */
+#define PCI_DEVICE_ID_3COM_2_3CRPAG175          0x0013 /* 3CRPAG175 (Atheros AR5212) */
+#define PCI_DEVICE_ID_ATHEROS_AR5210_AP         0x0207 /* AR5210 (Early) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM        0x1014 /* AR5212 (IBM MiniPCI) */
+#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT    0x1107 /* AR5210 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT    0x1113 /* AR5212 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT    0x1112 /* AR5211 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA       0xf013 /* AR5212 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY     0xff12 /* AR5211 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B    0xf11b /* AR5211 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2       0x0052 /* AR5312 WMAC (AP31) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7       0x0057 /* AR5312 WMAC (AP30-040) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8       0x0058 /* AR5312 WMAC (AP43-030) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0014       0x0014 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0015       0x0015 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0016       0x0016 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0017       0x0017 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0018       0x0018 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0019       0x0019 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR2413            0x001a /* AR2413 (Griffin-lite) */
+#define PCI_DEVICE_ID_ATHEROS_AR5413            0x001b /* AR5413 (Eagle) */
+#define PCI_DEVICE_ID_ATHEROS_AR5424            0x001c /* AR5424 (Condor PCI-E) */
+#define PCI_DEVICE_ID_ATHEROS_AR5416            0x0023 /* AR5416 */
+#define PCI_DEVICE_ID_ATHEROS_AR5418            0x0024 /* AR5418 */
+
+/****************************\
+  GENERIC DRIVER DEFINITIONS
+\****************************/
+
+#define ATH5K_PRINTF(fmt, ...)   printk("%s: " fmt, __func__, ##__VA_ARGS__)
+
+#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
+        printk(_level "ath5k %s: " _fmt, \
+                ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
+                ##__VA_ARGS__)
+
+#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
+        if (net_ratelimit()) \
+                ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
+        } while (0)
+
+#define ATH5K_INFO(_sc, _fmt, ...) \
+        ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
+
+#define ATH5K_WARN(_sc, _fmt, ...) \
+        ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
+
+#define ATH5K_ERR(_sc, _fmt, ...) \
+        ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
+
+/*
+ * Some tuneable values (these should be changeable by the user)
+ */
+#define AR5K_TUNE_DMA_BEACON_RESP               2
+#define AR5K_TUNE_SW_BEACON_RESP                10
+#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF       0
+#define AR5K_TUNE_RADAR_ALERT                   false
+#define AR5K_TUNE_MIN_TX_FIFO_THRES             1
+#define AR5K_TUNE_MAX_TX_FIFO_THRES             ((IEEE80211_MAX_LEN / 64) + 1)
+#define AR5K_TUNE_REGISTER_TIMEOUT              20000
+/* Register for RSSI threshold has a mask of 0xff, so 255 seems to
+ * be the max value. */
+#define AR5K_TUNE_RSSI_THRES                   129
+/* This must be set when setting the RSSI threshold otherwise it can
+ * prevent a reset. If AR5K_RSSI_THR is read after writing to it
+ * the BMISS_THRES will be seen as 0, seems harware doesn't keep
+ * track of it. Max value depends on harware. For AR5210 this is just 7.
+ * For AR5211+ this seems to be up to 255. */
+#define AR5K_TUNE_BMISS_THRES                  7
+#define AR5K_TUNE_REGISTER_DWELL_TIME           20000
+#define AR5K_TUNE_BEACON_INTERVAL               100
+#define AR5K_TUNE_AIFS                          2
+#define AR5K_TUNE_AIFS_11B                      2
+#define AR5K_TUNE_AIFS_XR                       0
+#define AR5K_TUNE_CWMIN                         15
+#define AR5K_TUNE_CWMIN_11B                     31
+#define AR5K_TUNE_CWMIN_XR                      3
+#define AR5K_TUNE_CWMAX                         1023
+#define AR5K_TUNE_CWMAX_11B                     1023
+#define AR5K_TUNE_CWMAX_XR                      7
+#define AR5K_TUNE_NOISE_FLOOR                   -72
+#define AR5K_TUNE_MAX_TXPOWER                   60
+#define AR5K_TUNE_DEFAULT_TXPOWER               30
+#define AR5K_TUNE_TPC_TXPOWER                   true
+#define AR5K_TUNE_ANT_DIVERSITY                 true
+#define AR5K_TUNE_HWTXTRIES                     4
+
+/* token to use for aifs, cwmin, cwmax in MadWiFi */
+#define AR5K_TXQ_USEDEFAULT     ((u32) -1)
+
+/* GENERIC CHIPSET DEFINITIONS */
+
+/* MAC Chips */
+enum ath5k_version {
+        AR5K_AR5210     = 0,
+        AR5K_AR5211     = 1,
+        AR5K_AR5212     = 2,
+};
+
+/* PHY Chips */
+enum ath5k_radio {
+        AR5K_RF5110     = 0,
+        AR5K_RF5111     = 1,
+        AR5K_RF5112     = 2,
+        AR5K_RF5413     = 3,
+};
+
+/*
+ * Common silicon revision/version values
+ */
+
+enum ath5k_srev_type {
+        AR5K_VERSION_VER,
+        AR5K_VERSION_RAD,
+};
+
+struct ath5k_srev_name {
+        const char              *sr_name;
+        enum ath5k_srev_type    sr_type;
+        u_int                   sr_val;
+};
+
+#define AR5K_SREV_UNKNOWN       0xffff
+
+#define AR5K_SREV_VER_AR5210    0x00
+#define AR5K_SREV_VER_AR5311    0x10
+#define AR5K_SREV_VER_AR5311A   0x20
+#define AR5K_SREV_VER_AR5311B   0x30
+#define AR5K_SREV_VER_AR5211    0x40
+#define AR5K_SREV_VER_AR5212    0x50
+#define AR5K_SREV_VER_AR5213    0x55
+#define AR5K_SREV_VER_AR5213A   0x59
+#define AR5K_SREV_VER_AR2424    0xa0
+#define AR5K_SREV_VER_AR5424    0xa3
+#define AR5K_SREV_VER_AR5413    0xa4
+#define AR5K_SREV_VER_AR5414    0xa5
+#define AR5K_SREV_VER_AR5416    0xc0    /* ? */
+#define AR5K_SREV_VER_AR5418    0xca
+
+#define AR5K_SREV_RAD_5110      0x00
+#define AR5K_SREV_RAD_5111      0x10
+#define AR5K_SREV_RAD_5111A     0x15
+#define AR5K_SREV_RAD_2111      0x20
+#define AR5K_SREV_RAD_5112      0x30
+#define AR5K_SREV_RAD_5112A     0x35
+#define AR5K_SREV_RAD_2112      0x40
+#define AR5K_SREV_RAD_2112A     0x45
+#define AR5K_SREV_RAD_SC1       0x63    /* Found on 5413/5414 */
+#define AR5K_SREV_RAD_SC2       0xa2    /* Found on 2424/5424 */
+#define AR5K_SREV_RAD_5133      0xc0    /* MIMO found on 5418 */
+
+/* IEEE defs */
+
+#define IEEE80211_MAX_LEN       2500
+
+/* TODO add support to mac80211 for vendor-specific rates and modes */
+
+/*
+ * Some of this information is based on Documentation from:
+ *
+ * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
+ *
+ * Modulation for Atheros' eXtended Range - range enhancing extension that is
+ * supposed to double the distance an Atheros client device can keep a
+ * connection with an Atheros access point. This is achieved by increasing
+ * the receiver sensitivity up to, -105dBm, which is about 20dB above what
+ * the 802.11 specifications demand. In addition, new (proprietary) data rates
+ * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
+ *
+ * Please note that can you either use XR or TURBO but you cannot use both,
+ * they are exclusive.
+ *
+ */
+#define MODULATION_XR           0x00000200
+/*
+ * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
+ * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
+ * signaling rate achieved through the bonding of two 54Mbit/s 802.11g
+ * channels. To use this feature your Access Point must also suport it.
+ * There is also a distinction between "static" and "dynamic" turbo modes:
+ *
+ * - Static: is the dumb version: devices set to this mode stick to it until
+ *     the mode is turned off.
+ * - Dynamic: is the intelligent version, the network decides itself if it
+ *     is ok to use turbo. As soon as traffic is detected on adjacent channels
+ *     (which would get used in turbo mode), or when a non-turbo station joins
+ *     the network, turbo mode won't be used until the situation changes again.
+ *     Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
+ *     monitors the used radio band in order to decide whether turbo mode may
+ *     be used or not.
+ *
+ * This article claims Super G sticks to bonding of channels 5 and 6 for
+ * USA:
+ *
+ * http://www.pcworld.com/article/id,113428-page,1/article.html
+ *
+ * The channel bonding seems to be driver specific though. In addition to
+ * deciding what channels will be used, these "Turbo" modes are accomplished
+ * by also enabling the following features:
+ *
+ * - Bursting: allows multiple frames to be sent at once, rather than pausing
+ *     after each frame. Bursting is a standards-compliant feature that can be
+ *     used with any Access Point.
+ * - Fast frames: increases the amount of information that can be sent per
+ *     frame, also resulting in a reduction of transmission overhead. It is a
+ *     proprietary feature that needs to be supported by the Access Point.
+ * - Compression: data frames are compressed in real time using a Lempel Ziv
+ *     algorithm. This is done transparently. Once this feature is enabled,
+ *     compression and decompression takes place inside the chipset, without
+ *     putting additional load on the host CPU.
+ *
+ */
+#define MODULATION_TURBO        0x00000080
+
+enum ath5k_vendor_mode {
+        MODE_ATHEROS_TURBO = NUM_IEEE80211_MODES+1,
+        MODE_ATHEROS_TURBOG
+};
+
+/* Number of supported mac80211 enum ieee80211_phymode modes by this driver */
+#define NUM_DRIVER_MODES        3
+
+/* adding this flag to rate_code enables short preamble, see ar5212_reg.h */
+#define AR5K_SET_SHORT_PREAMBLE 0x04
+
+#define HAS_SHPREAMBLE(_ix) (rt->rates[_ix].modulation == IEEE80211_RATE_CCK_2)
+#define SHPREAMBLE_FLAG(_ix) (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0)
+
+/****************\
+  TX DEFINITIONS
+\****************/
+
+/*
+ * Tx Descriptor
+ */
+struct ath5k_tx_status {
+        u16     ts_seqnum;
+        u16     ts_tstamp;
+        u8      ts_status;
+        u8      ts_rate;
+        s8      ts_rssi;
+        u8      ts_shortretry;
+        u8      ts_longretry;
+        u8      ts_virtcol;
+        u8      ts_antenna;
+};
+
+#define AR5K_TXSTAT_ALTRATE     0x80
+#define AR5K_TXERR_XRETRY       0x01
+#define AR5K_TXERR_FILT         0x02
+#define AR5K_TXERR_FIFO         0x04
+
+/**
+ * enum ath5k_tx_queue - Queue types used to classify tx queues.
+ * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
+ * @AR5K_TX_QUEUE_DATA: A normal data queue
+ * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue
+ * @AR5K_TX_QUEUE_BEACON: The beacon queue
+ * @AR5K_TX_QUEUE_CAB: The after-beacon queue
+ * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
+ */
+enum ath5k_tx_queue {
+        AR5K_TX_QUEUE_INACTIVE = 0,
+        AR5K_TX_QUEUE_DATA,
+        AR5K_TX_QUEUE_XR_DATA,
+        AR5K_TX_QUEUE_BEACON,
+        AR5K_TX_QUEUE_CAB,
+        AR5K_TX_QUEUE_UAPSD,
+};
+
+#define AR5K_NUM_TX_QUEUES              10
+#define AR5K_NUM_TX_QUEUES_NOQCU        2
+
+/*
+ * Queue syb-types to classify normal data queues.
+ * These are the 4 Access Categories as defined in
+ * WME spec. 0 is the lowest priority and 4 is the
+ * highest. Normal data that hasn't been classified
+ * goes to the Best Effort AC.
+ */
+enum ath5k_tx_queue_subtype {
+        AR5K_WME_AC_BK = 0,     /*Background traffic*/
+        AR5K_WME_AC_BE,         /*Best-effort (normal) traffic)*/
+        AR5K_WME_AC_VI,         /*Video traffic*/
+        AR5K_WME_AC_VO,         /*Voice traffic*/
+};
+
+/*
+ * Queue ID numbers as returned by the hw functions, each number
+ * represents a hw queue. If hw does not support hw queues
+ * (eg 5210) all data goes in one queue. These match
+ * d80211 definitions (net80211/MadWiFi don't use them).
+ */
+enum ath5k_tx_queue_id {
+        AR5K_TX_QUEUE_ID_NOQCU_DATA     = 0,
+        AR5K_TX_QUEUE_ID_NOQCU_BEACON   = 1,
+        AR5K_TX_QUEUE_ID_DATA_MIN       = 0, /*IEEE80211_TX_QUEUE_DATA0*/
+        AR5K_TX_QUEUE_ID_DATA_MAX       = 4, /*IEEE80211_TX_QUEUE_DATA4*/
+        AR5K_TX_QUEUE_ID_DATA_SVP       = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/
+        AR5K_TX_QUEUE_ID_CAB            = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/
+        AR5K_TX_QUEUE_ID_BEACON         = 7, /*IEEE80211_TX_QUEUE_BEACON*/
+        AR5K_TX_QUEUE_ID_UAPSD          = 8,
+        AR5K_TX_QUEUE_ID_XR_DATA        = 9,
+};
+
+
+/*
+ * Flags to set hw queue's parameters...
+ */
+#define AR5K_TXQ_FLAG_TXOKINT_ENABLE            0x0001  /* Enable TXOK interrupt */
+#define AR5K_TXQ_FLAG_TXERRINT_ENABLE           0x0002  /* Enable TXERR interrupt */
+#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE           0x0004  /* Enable TXEOL interrupt -not used- */
+#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE          0x0008  /* Enable TXDESC interrupt -not used- */
+#define AR5K_TXQ_FLAG_TXURNINT_ENABLE           0x0010  /* Enable TXURN interrupt */
+#define AR5K_TXQ_FLAG_BACKOFF_DISABLE           0x0020  /* Disable random post-backoff */
+#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0040  /* Enable ready time expiry policy (?)*/
+#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0080  /* Enable backoff while bursting */
+#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS         0x0100  /* Disable backoff while bursting */
+#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE        0x0200  /* Enable hw compression -not implemented-*/
+
+/*
+ * A struct to hold tx queue's parameters
+ */
+struct ath5k_txq_info {
+        enum ath5k_tx_queue tqi_type;
+        enum ath5k_tx_queue_subtype tqi_subtype;
+        u16     tqi_flags;      /* Tx queue flags (see above) */
+        u32     tqi_aifs;       /* Arbitrated Interframe Space */
+        s32     tqi_cw_min;     /* Minimum Contention Window */
+        s32     tqi_cw_max;     /* Maximum Contention Window */
+        u32     tqi_cbr_period; /* Constant bit rate period */
+        u32     tqi_cbr_overflow_limit;
+        u32     tqi_burst_time;
+        u32     tqi_ready_time; /* Not used */
+};
+
+/*
+ * Transmit packet types.
+ * These are not fully used inside OpenHAL yet
+ */
+enum ath5k_pkt_type {
+        AR5K_PKT_TYPE_NORMAL            = 0,
+        AR5K_PKT_TYPE_ATIM              = 1,
+        AR5K_PKT_TYPE_PSPOLL            = 2,
+        AR5K_PKT_TYPE_BEACON            = 3,
+        AR5K_PKT_TYPE_PROBE_RESP        = 4,
+        AR5K_PKT_TYPE_PIFS              = 5,
+};
+
+/*
+ * TX power and TPC settings
+ */
+#define AR5K_TXPOWER_OFDM(_r, _v)       (                       \
+        ((0 & 1) << ((_v) + 6)) |                               \
+        (((ah->ah_txpower.txp_rates[(_r)]) & 0x3f) << (_v))     \
+)
+
+#define AR5K_TXPOWER_CCK(_r, _v)        (                       \
+        (ah->ah_txpower.txp_rates[(_r)] & 0x3f) << (_v) \
+)
+
+/*
+ * DMA size definitions (2^n+2)
+ */
+enum ath5k_dmasize {
+        AR5K_DMASIZE_4B = 0,
+        AR5K_DMASIZE_8B,
+        AR5K_DMASIZE_16B,
+        AR5K_DMASIZE_32B,
+        AR5K_DMASIZE_64B,
+        AR5K_DMASIZE_128B,
+        AR5K_DMASIZE_256B,
+        AR5K_DMASIZE_512B
+};
+
+
+/****************\
+  RX DEFINITIONS
+\****************/
+
+/*
+ * Rx Descriptor
+ */
+struct ath5k_rx_status {
+        u16     rs_datalen;
+        u16     rs_tstamp;
+        u8      rs_status;
+        u8      rs_phyerr;
+        s8      rs_rssi;
+        u8      rs_keyix;
+        u8      rs_rate;
+        u8      rs_antenna;
+        u8      rs_more;
+};
+
+#define AR5K_RXERR_CRC          0x01
+#define AR5K_RXERR_PHY          0x02
+#define AR5K_RXERR_FIFO         0x04
+#define AR5K_RXERR_DECRYPT      0x08
+#define AR5K_RXERR_MIC          0x10
+#define AR5K_RXKEYIX_INVALID    ((u8) - 1)
+#define AR5K_TXKEYIX_INVALID    ((u32) - 1)
+
+struct ath5k_mib_stats {
+        u32     ackrcv_bad;
+        u32     rts_bad;
+        u32     rts_good;
+        u32     fcs_bad;
+        u32     beacons;
+};
+
+
+
+
+/**************************\
+ BEACON TIMERS DEFINITIONS
+\**************************/
+
+#define AR5K_BEACON_PERIOD      0x0000ffff
+#define AR5K_BEACON_ENA         0x00800000 /*enable beacon xmit*/
+#define AR5K_BEACON_RESET_TSF   0x01000000 /*force a TSF reset*/
+
+#if 0
+/**
+ * struct ath5k_beacon_state - Per-station beacon timer state.
+ * @bs_interval: in TU's, can also include the above flags
+ * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a
+ *      Point Coordination Function capable AP
+ */
+struct ath5k_beacon_state {
+        u32     bs_next_beacon;
+        u32     bs_next_dtim;
+        u32     bs_interval;
+        u8      bs_dtim_period;
+        u8      bs_cfp_period;
+        u16     bs_cfp_max_duration;
+        u16     bs_cfp_du_remain;
+        u16     bs_tim_offset;
+        u16     bs_sleep_duration;
+        u16     bs_bmiss_threshold;
+        u32     bs_cfp_next;
+};
+#endif
+
+
+/*
+ * TSF to TU conversion:
+ *
+ * TSF is a 64bit value in usec (microseconds).
+ * TU is a 32bit value in roughly msec (milliseconds): usec / 1024
+ * (1000ms equals 976 TU)
+ */
+#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
+
+
+
+/********************\
+  COMMON DEFINITIONS
+\********************/
+
+/*
+ * Atheros descriptor
+ */
+struct ath5k_desc {
+        u32     ds_link;
+        u32     ds_data;
+        u32     ds_ctl0;
+        u32     ds_ctl1;
+        u32     ds_hw[4];
+
+        union {
+                struct ath5k_rx_status rx;
+                struct ath5k_tx_status tx;
+        } ds_us;
+
+#define ds_rxstat ds_us.rx
+#define ds_txstat ds_us.tx
+
+} __packed;
+
+#define AR5K_RXDESC_INTREQ      0x0020
+
+#define AR5K_TXDESC_CLRDMASK    0x0001
+#define AR5K_TXDESC_NOACK       0x0002  /*[5211+]*/
+#define AR5K_TXDESC_RTSENA      0x0004
+#define AR5K_TXDESC_CTSENA      0x0008
+#define AR5K_TXDESC_INTREQ      0x0010
+#define AR5K_TXDESC_VEOL        0x0020  /*[5211+]*/
+
+#define AR5K_SLOT_TIME_9        396
+#define AR5K_SLOT_TIME_20       880
+#define AR5K_SLOT_TIME_MAX      0xffff
+
+/* channel_flags */
+#define CHANNEL_CW_INT  0x0008  /* Contention Window interference detected */
+#define CHANNEL_TURBO   0x0010  /* Turbo Channel */
+#define CHANNEL_CCK     0x0020  /* CCK channel */
+#define CHANNEL_OFDM    0x0040  /* OFDM channel */
+#define CHANNEL_2GHZ    0x0080  /* 2GHz channel. */
+#define CHANNEL_5GHZ    0x0100  /* 5GHz channel */
+#define CHANNEL_PASSIVE 0x0200  /* Only passive scan allowed */
+#define CHANNEL_DYN     0x0400  /* Dynamic CCK-OFDM channel (for g operation) */
+#define CHANNEL_XR      0x0800  /* XR channel */
+
+#define CHANNEL_A       (CHANNEL_5GHZ|CHANNEL_OFDM)
+#define CHANNEL_B       (CHANNEL_2GHZ|CHANNEL_CCK)
+#define CHANNEL_G       (CHANNEL_2GHZ|CHANNEL_OFDM)
+#define CHANNEL_T       (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
+#define CHANNEL_TG      (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
+#define CHANNEL_108A    CHANNEL_T
+#define CHANNEL_108G    CHANNEL_TG
+#define CHANNEL_X       (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)
+
+#define CHANNEL_ALL     (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \
+                CHANNEL_TURBO)
+
+#define CHANNEL_ALL_NOTURBO     (CHANNEL_ALL & ~CHANNEL_TURBO)
+#define CHANNEL_MODES           CHANNEL_ALL
+
+/*
+ * Used internaly in OpenHAL (ar5211.c/ar5212.c
+ * for reset_tx_queue). Also see struct struct ieee80211_channel.
+ */
+#define IS_CHAN_XR(_c)  ((_c.val & CHANNEL_XR) != 0)
+#define IS_CHAN_B(_c)   ((_c.val & CHANNEL_B) != 0)
+
+/*
+ * The following structure will be used to map 2GHz channels to
+ * 5GHz Atheros channels.
+ */
+struct ath5k_athchan_2ghz {
+        u32     a2_flags;
+        u16     a2_athchan;
+};
+
+/*
+ * Rate definitions
+ * TODO: Clean them up or move them on mac80211 -most of these infos are
+ *       used by the rate control algorytm on MadWiFi.
+ */
+
+/* Max number of rates on the rate table and what it seems
+ * Atheros hardware supports */
+#define AR5K_MAX_RATES 32
+
+/**
+ * struct ath5k_rate - rate structure
+ * @valid: is this a valid rate for the current mode
+ * @modulation: respective mac80211 modulation
+ * @rate_kbps: rate in kbit/s
+ * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on
+ *     &struct ath5k_rx_status.rs_rate and on TX on
+ *     &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports
+ *     up to 32 rates, indexed by 1-32. This means we really only need
+ *     6 bits for the rate_code.
+ * @dot11_rate: respective IEEE-802.11 rate value
+ * @control_rate: index of rate assumed to be used to send control frames.
+ *     This can be used to set override the value on the rate duration
+ *     registers. This is only useful if we can override in the harware at
+ *     what rate we want to send control frames at. Note that IEEE-802.11
+ *     Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we
+ *     should send ACK/CTS, if we change this value we can be breaking
+ *     the spec.
+ *
+ * This structure is used to get the RX rate or set the TX rate on the
+ * hardware descriptors. It is also used for internal modulation control
+ * and settings.
+ *
+ * On RX after the &struct ath5k_desc is parsed by the appropriate
+ * ah_proc_rx_desc() the respective hardware rate value is set in
+ * &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in
+ * &struct ath5k_tx_status.ts_rate which is later used to setup the
+ * &struct ath5k_desc correctly. This is the hardware rate map we are
+ * aware of:
+ *
+ * rate_code   1       2       3       4       5       6       7       8
+ * rate_kbps   3000    1000    ?       ?       ?       2000    500     48000
+ *
+ * rate_code   9       10      11      12      13      14      15      16
+ * rate_kbps   24000   12000   6000    54000   36000   18000   9000    ?
+ *
+ * rate_code   17      18      19      20      21      22      23      24
+ * rate_kbps   ?       ?       ?       ?       ?       ?       ?       11000
+ *
+ * rate_code   25      26      27      28      29      30      31      32
+ * rate_kbps   5500    2000    1000    ?       ?       ?       ?       ?
+ *
+ */
+struct ath5k_rate {
+        u8      valid;
+        u32     modulation;
+        u16     rate_kbps;
+        u8      rate_code;
+        u8      dot11_rate;
+        u8      control_rate;
+};
+
+/* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */
+struct ath5k_rate_table {
+        u16     rate_count;
+        u8      rate_code_to_index[AR5K_MAX_RATES];     /* Back-mapping */
+        struct ath5k_rate rates[AR5K_MAX_RATES];
+};
+
+/*
+ * Rate tables...
+ */
+#define AR5K_RATES_11A { 8, {                                   \
+        255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0,     \
+        7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255,     \
+        255, 255, 255, 255, 255, 255, 255, 255 }, {             \
+        { 1, IEEE80211_RATE_OFDM, 6000, 11, 140, 0 },           \
+        { 1, IEEE80211_RATE_OFDM, 9000, 15, 18, 0 },            \
+        { 1, IEEE80211_RATE_OFDM, 12000, 10, 152, 2 },          \
+        { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 2 },           \
+        { 1, IEEE80211_RATE_OFDM, 24000, 9, 176, 4 },           \
+        { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 4 },           \
+        { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 4 },            \
+        { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 4 } }         \
+}
+
+#define AR5K_RATES_11B { 4, {                                           \
+        255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,     \
+        255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,     \
+        3, 2, 1, 0, 255, 255, 255, 255 }, {                             \
+        { 1, IEEE80211_RATE_CCK, 1000, 27, 130, 0 },    \
+        { 1, IEEE80211_RATE_CCK_2, 2000, 26, 132, 1 },  \
+        { 1, IEEE80211_RATE_CCK_2, 5500, 25, 139, 1 },  \
+        { 1, IEEE80211_RATE_CCK_2, 11000, 24, 150, 1 } }        \
+}
+
+#define AR5K_RATES_11G { 12, {                                  \
+        255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4,    \
+        11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255,    \
+        3, 2, 1, 0, 255, 255, 255, 255 }, {                     \
+        { 1, IEEE80211_RATE_CCK, 1000, 27, 2, 0 },              \
+        { 1, IEEE80211_RATE_CCK_2, 2000, 26, 4, 1 },            \
+        { 1, IEEE80211_RATE_CCK_2, 5500, 25, 11, 1 },           \
+        { 1, IEEE80211_RATE_CCK_2, 11000, 24, 22, 1 },  \
+        { 0, IEEE80211_RATE_OFDM, 6000, 11, 12, 4 },    \
+        { 0, IEEE80211_RATE_OFDM, 9000, 15, 18, 4 },    \
+        { 1, IEEE80211_RATE_OFDM, 12000, 10, 24, 6 },   \
+        { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 6 },   \
+        { 1, IEEE80211_RATE_OFDM, 24000, 9, 48, 8 },    \
+        { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 8 },   \
+        { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 8 },    \
+        { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 8 } } \
+}
+
+#define AR5K_RATES_TURBO { 8, {                                 \
+        255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0,     \
+        7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255,     \
+        255, 255, 255, 255, 255, 255, 255, 255 }, {             \
+        { 1, MODULATION_TURBO, 6000, 11, 140, 0 },      \
+        { 1, MODULATION_TURBO, 9000, 15, 18, 0 },       \
+        { 1, MODULATION_TURBO, 12000, 10, 152, 2 },     \
+        { 1, MODULATION_TURBO, 18000, 14, 36, 2 },      \
+        { 1, MODULATION_TURBO, 24000, 9, 176, 4 },      \
+        { 1, MODULATION_TURBO, 36000, 13, 72, 4 },      \
+        { 1, MODULATION_TURBO, 48000, 8, 96, 4 },       \
+        { 1, MODULATION_TURBO, 54000, 12, 108, 4 } }    \
+}
+
+#define AR5K_RATES_XR { 12, {                                   \
+        255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4,            \
+        11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255,    \
+        255, 255, 255, 255, 255, 255, 255, 255 }, {             \
+        { 1, MODULATION_XR, 500, 7, 129, 0 },           \
+        { 1, MODULATION_XR, 1000, 2, 139, 1 },          \
+        { 1, MODULATION_XR, 2000, 6, 150, 2 },          \
+        { 1, MODULATION_XR, 3000, 1, 150, 3 },          \
+        { 1, IEEE80211_RATE_OFDM, 6000, 11, 140, 4 },   \
+        { 1, IEEE80211_RATE_OFDM, 9000, 15, 18, 4 },    \
+        { 1, IEEE80211_RATE_OFDM, 12000, 10, 152, 6 },  \
+        { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 6 },   \
+        { 1, IEEE80211_RATE_OFDM, 24000, 9, 176, 8 },   \
+        { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 8 },   \
+        { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 8 },    \
+        { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 8 } } \
+}
+
+/*
+ * Crypto definitions
+ */
+
+#define AR5K_KEYCACHE_SIZE      8
+
+/***********************\
+ HW RELATED DEFINITIONS
+\***********************/
+
+/*
+ * Misc definitions
+ */
+#define AR5K_RSSI_EP_MULTIPLIER (1<<7)
+
+#define AR5K_ASSERT_ENTRY(_e, _s) do {          \
+        if (_e >= _s)                           \
+                return (false);                 \
+} while (0)
+
+
+enum ath5k_ant_setting {
+        AR5K_ANT_VARIABLE       = 0,    /* variable by programming */
+        AR5K_ANT_FIXED_A        = 1,    /* fixed to 11a frequencies */
+        AR5K_ANT_FIXED_B        = 2,    /* fixed to 11b frequencies */
+        AR5K_ANT_MAX            = 3,
+};
+
+/*
+ * Hardware interrupt abstraction
+ */
+
+/**
+ * enum ath5k_int - Hardware interrupt masks helpers
+ *
+ * @AR5K_INT_RX: mask to identify received frame interrupts, of type
+ *      AR5K_ISR_RXOK or AR5K_ISR_RXERR
+ * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?)
+ * @AR5K_INT_RXNOFRM: No frame received (?)
+ * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The
+ *      Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's
+ *      LinkPtr is NULL. For more details, refer to:
+ *      http://www.freepatentsonline.com/20030225739.html
+ * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
+ *      Note that Rx overrun is not always fatal, on some chips we can continue
+ *      operation without reseting the card, that's why int_fatal is not
+ *      common for all chips.
+ * @AR5K_INT_TX: mask to identify received frame interrupts, of type
+ *      AR5K_ISR_TXOK or AR5K_ISR_TXERR
+ * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?)
+ * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold
+ *      We currently do increments on interrupt by
+ *      (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2
+ * @AR5K_INT_MIB: Indicates the Management Information Base counters should be
+ *      checked. We should do this with ath5k_hw_update_mib_counters() but
+ *      it seems we should also then do some noise immunity work.
+ * @AR5K_INT_RXPHY: RX PHY Error
+ * @AR5K_INT_RXKCM: ??
+ * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
+ *      beacon that must be handled in software. The alternative is if you
+ *      have VEOL support, in that case you let the hardware deal with things.
+ * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
+ *      beacons from the AP have associated with, we should probably try to
+ *      reassociate. When in IBSS mode this might mean we have not received
+ *      any beacons from any local stations. Note that every station in an
+ *      IBSS schedules to send beacons at the Target Beacon Transmission Time
+ *      (TBTT) with a random backoff.
+ * @AR5K_INT_BNR: Beacon Not Ready interrupt - ??
+ * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now
+ *      until properly handled
+ * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA
+ *      errors. These types of errors we can enable seem to be of type
+ *      AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
+ * @AR5K_INT_GLOBAL: Seems to be used to clear and set the IER
+ * @AR5K_INT_NOCARD: signals the card has been removed
+ * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same
+ *      bit value
+ *
+ * These are mapped to take advantage of some common bits
+ * between the MACs, to be able to set intr properties
+ * easier. Some of them are not used yet inside hw.c. Most map
+ * to the respective hw interrupt value as they are common amogst different
+ * MACs.
+ */
+enum ath5k_int {
+        AR5K_INT_RX     = 0x00000001, /* Not common */
+        AR5K_INT_RXDESC = 0x00000002,
+        AR5K_INT_RXNOFRM = 0x00000008,
+        AR5K_INT_RXEOL  = 0x00000010,
+        AR5K_INT_RXORN  = 0x00000020,
+        AR5K_INT_TX     = 0x00000040, /* Not common */
+        AR5K_INT_TXDESC = 0x00000080,
+        AR5K_INT_TXURN  = 0x00000800,
+        AR5K_INT_MIB    = 0x00001000,
+        AR5K_INT_RXPHY  = 0x00004000,
+        AR5K_INT_RXKCM  = 0x00008000,
+        AR5K_INT_SWBA   = 0x00010000,
+        AR5K_INT_BMISS  = 0x00040000,
+        AR5K_INT_BNR    = 0x00100000, /* Not common */
+        AR5K_INT_GPIO   = 0x01000000,
+        AR5K_INT_FATAL  = 0x40000000, /* Not common */
+        AR5K_INT_GLOBAL = 0x80000000,
+
+        AR5K_INT_COMMON  = AR5K_INT_RXNOFRM
+                        | AR5K_INT_RXDESC
+                        | AR5K_INT_RXEOL
+                        | AR5K_INT_RXORN
+                        | AR5K_INT_TXURN
+                        | AR5K_INT_TXDESC
+                        | AR5K_INT_MIB
+                        | AR5K_INT_RXPHY
+                        | AR5K_INT_RXKCM
+                        | AR5K_INT_SWBA
+                        | AR5K_INT_BMISS
+                        | AR5K_INT_GPIO,
+        AR5K_INT_NOCARD = 0xffffffff
+};
+
+/*
+ * Power management
+ */
+enum ath5k_power_mode {
+        AR5K_PM_UNDEFINED = 0,
+        AR5K_PM_AUTO,
+        AR5K_PM_AWAKE,
+        AR5K_PM_FULL_SLEEP,
+        AR5K_PM_NETWORK_SLEEP,
+};
+
+/*
+ * These match net80211 definitions (not used in
+ * d80211).
+ */
+#define AR5K_LED_INIT   0 /*IEEE80211_S_INIT*/
+#define AR5K_LED_SCAN   1 /*IEEE80211_S_SCAN*/
+#define AR5K_LED_AUTH   2 /*IEEE80211_S_AUTH*/
+#define AR5K_LED_ASSOC  3 /*IEEE80211_S_ASSOC*/
+#define AR5K_LED_RUN    4 /*IEEE80211_S_RUN*/
+
+/* GPIO-controlled software LED */
+#define AR5K_SOFTLED_PIN        0
+#define AR5K_SOFTLED_ON         0
+#define AR5K_SOFTLED_OFF        1
+
+/*
+ * Chipset capabilities -see ath5k_hw_get_capability-
+ * get_capability function is not yet fully implemented
+ * in OpenHAL so most of these don't work yet...
+ */
+enum ath5k_capability_type {
+        AR5K_CAP_REG_DMN                = 0,    /* Used to get current reg. domain id */
+        AR5K_CAP_TKIP_MIC               = 2,    /* Can handle TKIP MIC in hardware */
+        AR5K_CAP_TKIP_SPLIT             = 3,    /* TKIP uses split keys */
+        AR5K_CAP_PHYCOUNTERS            = 4,    /* PHY error counters */
+        AR5K_CAP_DIVERSITY              = 5,    /* Supports fast diversity */
+        AR5K_CAP_NUM_TXQUEUES           = 6,    /* Used to get max number of hw txqueues */
+        AR5K_CAP_VEOL                   = 7,    /* Supports virtual EOL */
+        AR5K_CAP_COMPRESSION            = 8,    /* Supports compression */
+        AR5K_CAP_BURST                  = 9,    /* Supports packet bursting */
+        AR5K_CAP_FASTFRAME              = 10,   /* Supports fast frames */
+        AR5K_CAP_TXPOW                  = 11,   /* Used to get global tx power limit */
+        AR5K_CAP_TPC                    = 12,   /* Can do per-packet tx power control (needed for 802.11a) */
+        AR5K_CAP_BSSIDMASK              = 13,   /* Supports bssid mask */
+        AR5K_CAP_MCAST_KEYSRCH          = 14,   /* Supports multicast key search */
+        AR5K_CAP_TSF_ADJUST             = 15,   /* Supports beacon tsf adjust */
+        AR5K_CAP_XR                     = 16,   /* Supports XR mode */
+        AR5K_CAP_WME_TKIPMIC            = 17,   /* Supports TKIP MIC when using WMM */
+        AR5K_CAP_CHAN_HALFRATE          = 18,   /* Supports half rate channels */
+        AR5K_CAP_CHAN_QUARTERRATE       = 19,   /* Supports quarter rate channels */
+        AR5K_CAP_RFSILENT               = 20,   /* Supports RFsilent */
+};
+
+struct ath5k_capabilities {
+        /*
+         * Supported PHY modes
+         * (ie. CHANNEL_A, CHANNEL_B, ...)
+         */
+        DECLARE_BITMAP(cap_mode, NUM_DRIVER_MODES);
+
+        /*
+         * Frequency range (without regulation restrictions)
+         */
+        struct {
+                u16     range_2ghz_min;
+                u16     range_2ghz_max;
+                u16     range_5ghz_min;
+                u16     range_5ghz_max;
+        } cap_range;
+
+        /*
+         * Active regulation domain settings
+         */
+        struct {
+                enum ath5k_regdom reg_current;
+                enum ath5k_regdom reg_hw;
+        } cap_regdomain;
+
+        /*
+         * Values stored in the EEPROM (some of them...)
+         */
+        struct ath5k_eeprom_info        cap_eeprom;
+
+        /*
+         * Queue information
+         */
+        struct {
+                u8      q_tx_num;
+        } cap_queues;
+};
+
+
+/***************************************\
+  HARDWARE ABSTRACTION LAYER STRUCTURE
+\***************************************/
+
+/*
+ * Misc defines
+ */
+
+#define AR5K_MAX_GPIO           10
+#define AR5K_MAX_RF_BANKS       8
+
+struct ath5k_hw {
+        u32                     ah_magic;
+
+        struct ath5k_softc      *ah_sc;
+        void __iomem            *ah_iobase;
+
+        enum ath5k_int          ah_imr;
+
+        enum ieee80211_if_types ah_op_mode;
+        enum ath5k_power_mode   ah_power_mode;
+        struct ieee80211_channel ah_current_channel;
+        bool                    ah_turbo;
+        bool                    ah_calibration;
+        bool                    ah_running;
+        bool                    ah_single_chip;
+        enum ath5k_rfgain       ah_rf_gain;
+
+        u32                     ah_mac_srev;
+        u16                     ah_mac_version;
+        u16                     ah_mac_revision;
+        u16                     ah_phy_revision;
+        u16                     ah_radio_5ghz_revision;
+        u16                     ah_radio_2ghz_revision;
+
+        enum ath5k_version      ah_version;
+        enum ath5k_radio        ah_radio;
+        u32                     ah_phy;
+
+        bool                    ah_5ghz;
+        bool                    ah_2ghz;
+
+#define ah_regdomain            ah_capabilities.cap_regdomain.reg_current
+#define ah_regdomain_hw         ah_capabilities.cap_regdomain.reg_hw
+#define ah_modes                ah_capabilities.cap_mode
+#define ah_ee_version           ah_capabilities.cap_eeprom.ee_version
+
+        u32                     ah_atim_window;
+        u32                     ah_aifs;
+        u32                     ah_cw_min;
+        u32                     ah_cw_max;
+        bool                    ah_software_retry;
+        u32                     ah_limit_tx_retries;
+
+        u32                     ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
+        bool                    ah_ant_diversity;
+
+        u8                      ah_sta_id[ETH_ALEN];
+
+        /* Current BSSID we are trying to assoc to / creating.
+         * This is passed by mac80211 on config_interface() and cached here for
+         * use in resets */
+        u8                      ah_bssid[ETH_ALEN];
+
+        u32                     ah_gpio[AR5K_MAX_GPIO];
+        int                     ah_gpio_npins;
+
+        struct ath5k_capabilities ah_capabilities;
+
+        struct ath5k_txq_info   ah_txq[AR5K_NUM_TX_QUEUES];
+        u32                     ah_txq_status;
+        u32                     ah_txq_imr_txok;
+        u32                     ah_txq_imr_txerr;
+        u32                     ah_txq_imr_txurn;
+        u32                     ah_txq_imr_txdesc;
+        u32                     ah_txq_imr_txeol;
+        u32                     *ah_rf_banks;
+        size_t                  ah_rf_banks_size;
+        struct ath5k_gain       ah_gain;
+        u32                     ah_offset[AR5K_MAX_RF_BANKS];
+
+        struct {
+                u16             txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE];
+                u16             txp_rates[AR5K_MAX_RATES];
+                s16             txp_min;
+                s16             txp_max;
+                bool            txp_tpc;
+                s16             txp_ofdm;
+        } ah_txpower;
+
+        struct {
+                bool            r_enabled;
+                int             r_last_alert;
+                struct ieee80211_channel r_last_channel;
+        } ah_radar;
+
+        /* noise floor from last periodic calibration */
+        s32                     ah_noise_floor;
+
+        /*
+         * Function pointers
+         */
+        int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+                unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
+                unsigned int, unsigned int, unsigned int, unsigned int,
+                unsigned int, unsigned int, unsigned int);
+        bool (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+                unsigned int, unsigned int, unsigned int, unsigned int,
+                unsigned int, unsigned int);
+        int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *);
+        int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *);
+};
+
+/*
+ * Prototypes
+ */
+
+/* General Functions */
+extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set);
+/* Attach/Detach Functions */
+extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version);
+extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode);
+extern void ath5k_hw_detach(struct ath5k_hw *ah);
+/* Reset Functions */
+extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel);
+/* Power management functions */
+extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
+/* DMA Related Functions */
+extern void ath5k_hw_start_rx(struct ath5k_hw *ah);
+extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
+extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah);
+extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr);
+extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue);
+extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
+extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue);
+extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr);
+extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
+/* Interrupt handling */
+extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
+extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
+extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask);
+/* EEPROM access functions */
+extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain);
+/* Protocol Control Unit Functions */
+extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
+/* BSSID Functions */
+extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac);
+extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
+extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id);
+extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
+/* Receive start/stop functions */
+extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
+extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah);
+/* RX Filter functions */
+extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
+extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index);
+extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
+extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
+extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
+/* Beacon related functions */
+extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah);
+extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
+extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
+extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
+#if 0
+extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state);
+extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah);
+extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr);
+#endif
+extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ath5k_mib_stats *statistics);
+/* ACK bit rate */
+void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high);
+/* ACK/CTS Timeouts */
+extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout);
+extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah);
+extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout);
+extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah);
+/* Key table (WEP) functions */
+extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
+extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
+extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac);
+extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
+/* Queue Control Unit, DFS Control Unit Functions */
+extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info);
+extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info);
+extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info);
+extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
+extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
+extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
+extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
+extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah);
+/* Hardware Descriptor Functions */
+extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags);
+/* GPIO Functions */
+extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
+extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
+extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
+extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
+extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
+extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
+/* Regulatory Domain/Channels Setup */
+extern u16 ath5k_get_regdomain(struct ath5k_hw *ah);
+/* Misc functions */
+extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
+
+
+/* Initial register settings functions */
+extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
+/* Initialize RF */
+extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode);
+extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq);
+extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah);
+extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah);
+
+
+/* PHY/RF channel functions */
+extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
+extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
+/* PHY calibration */
+extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
+extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
+/* Misc PHY functions */
+extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
+extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
+extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
+extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+/* TX power setup */
+extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower);
+extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power);
+
+
+static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
+{
+        return ioread32(ah->ah_iobase + reg);
+}
+
+static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
+{
+        iowrite32(val, ah->ah_iobase + reg);
+}
+
+#endif
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
new file mode 100644
index 000000000000..d3d37282f3dc
--- /dev/null
+++ b/drivers/net/wireless/ath5k/base.c
@@ -0,0 +1,2817 @@
+/*-
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2006 Devicescape Software, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ *    redistribution must be conditioned upon including a substantially
+ *    similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/if.h>
+#include <linux/netdevice.h>
+#include <linux/cache.h>
+#include <linux/pci.h>
+#include <linux/ethtool.h>
+#include <linux/uaccess.h>
+
+#include <net/ieee80211_radiotap.h>
+
+#include <asm/unaligned.h>
+
+#include "base.h"
+#include "reg.h"
+#include "debug.h"
+
+/* unaligned little endian access */
+#define LE_READ_2(_p) (le16_to_cpu(get_unaligned((__le16 *)(_p))))
+#define LE_READ_4(_p) (le32_to_cpu(get_unaligned((__le32 *)(_p))))
+
+enum {
+        ATH_LED_TX,
+        ATH_LED_RX,
+};
+
+static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
+
+
+/******************\
+* Internal defines *
+\******************/
+
+/* Module info */
+MODULE_AUTHOR("Jiri Slaby");
+MODULE_AUTHOR("Nick Kossifidis");
+MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
+MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION("0.1.1 (EXPERIMENTAL)");
+
+
+/* Known PCI ids */
+static struct pci_device_id ath5k_pci_id_table[] __devinitdata = {
+        { PCI_VDEVICE(ATHEROS, 0x0207), .driver_data = AR5K_AR5210 }, /* 5210 early */
+        { PCI_VDEVICE(ATHEROS, 0x0007), .driver_data = AR5K_AR5210 }, /* 5210 */
+        { PCI_VDEVICE(ATHEROS, 0x0011), .driver_data = AR5K_AR5211 }, /* 5311 - this is on AHB bus !*/
+        { PCI_VDEVICE(ATHEROS, 0x0012), .driver_data = AR5K_AR5211 }, /* 5211 */
+        { PCI_VDEVICE(ATHEROS, 0x0013), .driver_data = AR5K_AR5212 }, /* 5212 */
+        { PCI_VDEVICE(3COM_2,  0x0013), .driver_data = AR5K_AR5212 }, /* 3com 5212 */
+        { PCI_VDEVICE(3COM,    0x0013), .driver_data = AR5K_AR5212 }, /* 3com 3CRDAG675 5212 */
+        { PCI_VDEVICE(ATHEROS, 0x1014), .driver_data = AR5K_AR5212 }, /* IBM minipci 5212 */
+        { PCI_VDEVICE(ATHEROS, 0x0014), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
+        { PCI_VDEVICE(ATHEROS, 0x0015), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
+        { PCI_VDEVICE(ATHEROS, 0x0016), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
+        { PCI_VDEVICE(ATHEROS, 0x0017), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
+        { PCI_VDEVICE(ATHEROS, 0x0018), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
+        { PCI_VDEVICE(ATHEROS, 0x0019), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
+        { PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */
+        { PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */
+        { PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* 5424 Condor (PCI-E)*/
+        { PCI_VDEVICE(ATHEROS, 0x0023), .driver_data = AR5K_AR5212 }, /* 5416 */
+        { PCI_VDEVICE(ATHEROS, 0x0024), .driver_data = AR5K_AR5212 }, /* 5418 */
+        { 0 }
+};
+MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
+
+/* Known SREVs */
+static struct ath5k_srev_name srev_names[] = {
+        { "5210",       AR5K_VERSION_VER,       AR5K_SREV_VER_AR5210 },
+        { "5311",       AR5K_VERSION_VER,       AR5K_SREV_VER_AR5311 },
+        { "5311A",      AR5K_VERSION_VER,       AR5K_SREV_VER_AR5311A },
+        { "5311B",      AR5K_VERSION_VER,       AR5K_SREV_VER_AR5311B },
+        { "5211",       AR5K_VERSION_VER,       AR5K_SREV_VER_AR5211 },
+        { "5212",       AR5K_VERSION_VER,       AR5K_SREV_VER_AR5212 },
+        { "5213",       AR5K_VERSION_VER,       AR5K_SREV_VER_AR5213 },
+        { "5213A",      AR5K_VERSION_VER,       AR5K_SREV_VER_AR5213A },
+        { "2424",       AR5K_VERSION_VER,       AR5K_SREV_VER_AR2424 },
+        { "5424",       AR5K_VERSION_VER,       AR5K_SREV_VER_AR5424 },
+        { "5413",       AR5K_VERSION_VER,       AR5K_SREV_VER_AR5413 },
+        { "5414",       AR5K_VERSION_VER,       AR5K_SREV_VER_AR5414 },
+        { "5416",       AR5K_VERSION_VER,       AR5K_SREV_VER_AR5416 },
+        { "5418",       AR5K_VERSION_VER,       AR5K_SREV_VER_AR5418 },
+        { "xxxxx",      AR5K_VERSION_VER,       AR5K_SREV_UNKNOWN },
+        { "5110",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5110 },
+        { "5111",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5111 },
+        { "2111",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2111 },
+        { "5112",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5112 },
+        { "5112A",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_5112A },
+        { "2112",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_2112 },
+        { "2112A",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_2112A },
+        { "SChip",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_SC1 },
+        { "SChip",      AR5K_VERSION_RAD,       AR5K_SREV_RAD_SC2 },
+        { "5133",       AR5K_VERSION_RAD,       AR5K_SREV_RAD_5133 },
+        { "xxxxx",      AR5K_VERSION_RAD,       AR5K_SREV_UNKNOWN },
+};
+
+/*
+ * Prototypes - PCI stack related functions
+ */
+static int __devinit    ath5k_pci_probe(struct pci_dev *pdev,
+                                const struct pci_device_id *id);
+static void __devexit   ath5k_pci_remove(struct pci_dev *pdev);
+#ifdef CONFIG_PM
+static int              ath5k_pci_suspend(struct pci_dev *pdev,
+                                        pm_message_t state);
+static int              ath5k_pci_resume(struct pci_dev *pdev);
+#else
+#define ath5k_pci_suspend NULL
+#define ath5k_pci_resume NULL
+#endif /* CONFIG_PM */
+
+static struct pci_driver ath5k_pci_drv_id = {
+        .name           = "ath5k_pci",
+        .id_table       = ath5k_pci_id_table,
+        .probe          = ath5k_pci_probe,
+        .remove         = __devexit_p(ath5k_pci_remove),
+        .suspend        = ath5k_pci_suspend,
+        .resume         = ath5k_pci_resume,
+};
+
+
+
+/*
+ * Prototypes - MAC 802.11 stack related functions
+ */
+static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
+                struct ieee80211_tx_control *ctl);
+static int ath5k_reset(struct ieee80211_hw *hw);
+static int ath5k_start(struct ieee80211_hw *hw);
+static void ath5k_stop(struct ieee80211_hw *hw);
+static int ath5k_add_interface(struct ieee80211_hw *hw,
+                struct ieee80211_if_init_conf *conf);
+static void ath5k_remove_interface(struct ieee80211_hw *hw,
+                struct ieee80211_if_init_conf *conf);
+static int ath5k_config(struct ieee80211_hw *hw,
+                struct ieee80211_conf *conf);
+static int ath5k_config_interface(struct ieee80211_hw *hw, int if_id,
+                struct ieee80211_if_conf *conf);
+static void ath5k_configure_filter(struct ieee80211_hw *hw,
+                unsigned int changed_flags,
+                unsigned int *new_flags,
+                int mc_count, struct dev_mc_list *mclist);
+static int ath5k_set_key(struct ieee80211_hw *hw,
+                enum set_key_cmd cmd,
+                const u8 *local_addr, const u8 *addr,
+                struct ieee80211_key_conf *key);
+static int ath5k_get_stats(struct ieee80211_hw *hw,
+                struct ieee80211_low_level_stats *stats);
+static int ath5k_get_tx_stats(struct ieee80211_hw *hw,
+                struct ieee80211_tx_queue_stats *stats);
+static u64 ath5k_get_tsf(struct ieee80211_hw *hw);
+static void ath5k_reset_tsf(struct ieee80211_hw *hw);
+static int ath5k_beacon_update(struct ieee80211_hw *hw,
+                struct sk_buff *skb,
+                struct ieee80211_tx_control *ctl);
+
+static struct ieee80211_ops ath5k_hw_ops = {
+        .tx             = ath5k_tx,
+        .start          = ath5k_start,
+        .stop           = ath5k_stop,
+        .add_interface  = ath5k_add_interface,
+        .remove_interface = ath5k_remove_interface,
+        .config         = ath5k_config,
+        .config_interface = ath5k_config_interface,
+        .configure_filter = ath5k_configure_filter,
+        .set_key        = ath5k_set_key,
+        .get_stats      = ath5k_get_stats,
+        .conf_tx        = NULL,
+        .get_tx_stats   = ath5k_get_tx_stats,
+        .get_tsf        = ath5k_get_tsf,
+        .reset_tsf      = ath5k_reset_tsf,
+        .beacon_update  = ath5k_beacon_update,
+};
+
+/*
+ * Prototypes - Internal functions
+ */
+/* Attach detach */
+static int      ath5k_attach(struct pci_dev *pdev,
+                        struct ieee80211_hw *hw);
+static void     ath5k_detach(struct pci_dev *pdev,
+                        struct ieee80211_hw *hw);
+/* Channel/mode setup */
+static inline short ath5k_ieee2mhz(short chan);
+static unsigned int ath5k_copy_rates(struct ieee80211_rate *rates,
+                                const struct ath5k_rate_table *rt,
+                                unsigned int max);
+static unsigned int ath5k_copy_channels(struct ath5k_hw *ah,
+                                struct ieee80211_channel *channels,
+                                unsigned int mode,
+                                unsigned int max);
+static int      ath5k_getchannels(struct ieee80211_hw *hw);
+static int      ath5k_chan_set(struct ath5k_softc *sc,
+                                struct ieee80211_channel *chan);
+static void     ath5k_setcurmode(struct ath5k_softc *sc,
+                                unsigned int mode);
+static void     ath5k_mode_setup(struct ath5k_softc *sc);
+/* Descriptor setup */
+static int      ath5k_desc_alloc(struct ath5k_softc *sc,
+                                struct pci_dev *pdev);
+static void     ath5k_desc_free(struct ath5k_softc *sc,
+                                struct pci_dev *pdev);
+/* Buffers setup */
+static int      ath5k_rxbuf_setup(struct ath5k_softc *sc,
+                                struct ath5k_buf *bf);
+static int      ath5k_txbuf_setup(struct ath5k_softc *sc,
+                                struct ath5k_buf *bf,
+                                struct ieee80211_tx_control *ctl);
+
+static inline void ath5k_txbuf_free(struct ath5k_softc *sc,
+                                struct ath5k_buf *bf)
+{
+        BUG_ON(!bf);
+        if (!bf->skb)
+                return;
+        pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
+                        PCI_DMA_TODEVICE);
+        dev_kfree_skb(bf->skb);
+        bf->skb = NULL;
+}
+
+/* Queues setup */
+static struct   ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc,
+                                int qtype, int subtype);
+static int      ath5k_beaconq_setup(struct ath5k_hw *ah);
+static int      ath5k_beaconq_config(struct ath5k_softc *sc);
+static void     ath5k_txq_drainq(struct ath5k_softc *sc,
+                                struct ath5k_txq *txq);
+static void     ath5k_txq_cleanup(struct ath5k_softc *sc);
+static void     ath5k_txq_release(struct ath5k_softc *sc);
+/* Rx handling */
+static int      ath5k_rx_start(struct ath5k_softc *sc);
+static void     ath5k_rx_stop(struct ath5k_softc *sc);
+static unsigned int ath5k_rx_decrypted(struct ath5k_softc *sc,
+                                        struct ath5k_desc *ds,
+                                        struct sk_buff *skb);
+static void     ath5k_tasklet_rx(unsigned long data);
+/* Tx handling */
+static void     ath5k_tx_processq(struct ath5k_softc *sc,
+                                struct ath5k_txq *txq);
+static void     ath5k_tasklet_tx(unsigned long data);
+/* Beacon handling */
+static int      ath5k_beacon_setup(struct ath5k_softc *sc,
+                                struct ath5k_buf *bf,
+                                struct ieee80211_tx_control *ctl);
+static void     ath5k_beacon_send(struct ath5k_softc *sc);
+static void     ath5k_beacon_config(struct ath5k_softc *sc);
+
+static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
+{
+        u64 tsf = ath5k_hw_get_tsf64(ah);
+
+        if ((tsf & 0x7fff) < rstamp)
+                tsf -= 0x8000;
+
+        return (tsf & ~0x7fff) | rstamp;
+}
+
+/* Interrupt handling */
+static int      ath5k_init(struct ath5k_softc *sc);
+static int      ath5k_stop_locked(struct ath5k_softc *sc);
+static int      ath5k_stop_hw(struct ath5k_softc *sc);
+static irqreturn_t ath5k_intr(int irq, void *dev_id);
+static void     ath5k_tasklet_reset(unsigned long data);
+
+static void     ath5k_calibrate(unsigned long data);
+/* LED functions */
+static void     ath5k_led_off(unsigned long data);
+static void     ath5k_led_blink(struct ath5k_softc *sc,
+                                unsigned int on,
+                                unsigned int off);
+static void     ath5k_led_event(struct ath5k_softc *sc,
+                                int event);
+
+
+/*
+ * Module init/exit functions
+ */
+static int __init
+init_ath5k_pci(void)
+{
+        int ret;
+
+        ath5k_debug_init();
+
+        ret = pci_register_driver(&ath5k_pci_drv_id);
+        if (ret) {
+                printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
+                return ret;
+        }
+
+        return 0;
+}
+
+static void __exit
+exit_ath5k_pci(void)
+{
+        pci_unregister_driver(&ath5k_pci_drv_id);
+
+        ath5k_debug_finish();
+}
+
+module_init(init_ath5k_pci);
+module_exit(exit_ath5k_pci);
+
+
+/********************\
+* PCI Initialization *
+\********************/
+
+static const char *
+ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
+{
+        const char *name = "xxxxx";
+        unsigned int i;
+
+        for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
+                if (srev_names[i].sr_type != type)
+                        continue;
+                if ((val & 0xff) < srev_names[i + 1].sr_val) {
+                        name = srev_names[i].sr_name;
+                        break;
+                }
+        }
+
+        return name;
+}
+
+static int __devinit
+ath5k_pci_probe(struct pci_dev *pdev,
+                const struct pci_device_id *id)
+{
+        void __iomem *mem;
+        struct ath5k_softc *sc;
+        struct ieee80211_hw *hw;
+        int ret;
+        u8 csz;
+
+        ret = pci_enable_device(pdev);
+        if (ret) {
+                dev_err(&pdev->dev, "can't enable device\n");
+                goto err;
+        }
+
+        /* XXX 32-bit addressing only */
+        ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+        if (ret) {
+                dev_err(&pdev->dev, "32-bit DMA not available\n");
+                goto err_dis;
+        }
+
+        /*
+         * Cache line size is used to size and align various
+         * structures used to communicate with the hardware.
+         */
+        pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
+        if (csz == 0) {
+                /*
+                 * Linux 2.4.18 (at least) writes the cache line size
+                 * register as a 16-bit wide register which is wrong.
+                 * We must have this setup properly for rx buffer
+                 * DMA to work so force a reasonable value here if it
+                 * comes up zero.
+                 */
+                csz = L1_CACHE_BYTES / sizeof(u32);
+                pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
+        }
+        /*
+         * The default setting of latency timer yields poor results,
+         * set it to the value used by other systems.  It may be worth
+         * tweaking this setting more.
+         */
+        pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
+
+        /* Enable bus mastering */
+        pci_set_master(pdev);
+
+        /*
+         * Disable the RETRY_TIMEOUT register (0x41) to keep
+         * PCI Tx retries from interfering with C3 CPU state.
+         */
+        pci_write_config_byte(pdev, 0x41, 0);
+
+        ret = pci_request_region(pdev, 0, "ath5k");
+        if (ret) {
+                dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
+                goto err_dis;
+        }
+
+        mem = pci_iomap(pdev, 0, 0);
+        if (!mem) {
+                dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
+                ret = -EIO;
+                goto err_reg;
+        }
+
+        /*
+         * Allocate hw (mac80211 main struct)
+         * and hw->priv (driver private data)
+         */
+        hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
+        if (hw == NULL) {
+                dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
+                ret = -ENOMEM;
+                goto err_map;
+        }
+
+        dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
+
+        /* Initialize driver private data */
+        SET_IEEE80211_DEV(hw, &pdev->dev);
+        hw->flags = IEEE80211_HW_RX_INCLUDES_FCS;
+        hw->extra_tx_headroom = 2;
+        hw->channel_change_time = 5000;
+        /* these names are misleading */
+        hw->max_rssi = -110; /* signal in dBm */
+        hw->max_noise = -110; /* noise in dBm */
+        hw->max_signal = 100; /* we will provide a percentage based on rssi */
+        sc = hw->priv;
+        sc->hw = hw;
+        sc->pdev = pdev;
+
+        ath5k_debug_init_device(sc);
+
+        /*
+         * Mark the device as detached to avoid processing
+         * interrupts until setup is complete.
+         */
+        __set_bit(ATH_STAT_INVALID, sc->status);
+
+        sc->iobase = mem; /* So we can unmap it on detach */
+        sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
+        sc->opmode = IEEE80211_IF_TYPE_STA;
+        mutex_init(&sc->lock);
+        spin_lock_init(&sc->rxbuflock);
+        spin_lock_init(&sc->txbuflock);
+
+        /* Set private data */
+        pci_set_drvdata(pdev, hw);
+
+        /* Enable msi for devices that support it */
+        pci_enable_msi(pdev);
+
+        /* Setup interrupt handler */
+        ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
+        if (ret) {
+                ATH5K_ERR(sc, "request_irq failed\n");
+                goto err_free;
+        }
+
+        /* Initialize device */
+        sc->ah = ath5k_hw_attach(sc, id->driver_data);
+        if (IS_ERR(sc->ah)) {
+                ret = PTR_ERR(sc->ah);
+                goto err_irq;
+        }
+
+        /* Finish private driver data initialization */
+        ret = ath5k_attach(pdev, hw);
+        if (ret)
+                goto err_ah;
+
+        ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
+                        ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev),
+                                        sc->ah->ah_mac_srev,
+                                        sc->ah->ah_phy_revision);
+
+        if(!sc->ah->ah_single_chip){
+                /* Single chip radio (!RF5111) */
+                if(sc->ah->ah_radio_5ghz_revision && !sc->ah->ah_radio_2ghz_revision) {
+                        /* No 5GHz support -> report 2GHz radio */
+                        if(!test_bit(MODE_IEEE80211A, sc->ah->ah_capabilities.cap_mode)){
+                                ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
+                                        ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
+                                                        sc->ah->ah_radio_5ghz_revision);
+                        /* No 2GHz support (5110 and some 5Ghz only cards) -> report 5Ghz radio */
+                        } else if(!test_bit(MODE_IEEE80211B, sc->ah->ah_capabilities.cap_mode)){
+                                ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
+                                        ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
+                                                        sc->ah->ah_radio_5ghz_revision);
+                        /* Multiband radio */
+                        } else {
+                                ATH5K_INFO(sc, "RF%s multiband radio found"
+                                        " (0x%x)\n",
+                                        ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
+                                                        sc->ah->ah_radio_5ghz_revision);
+                        }
+                }
+                /* Multi chip radio (RF5111 - RF2111) -> report both 2GHz/5GHz radios */
+                else if(sc->ah->ah_radio_5ghz_revision && sc->ah->ah_radio_2ghz_revision){
+                        ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
+                                ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
+                                                sc->ah->ah_radio_5ghz_revision);
+                        ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
+                                ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_2ghz_revision),
+                                                sc->ah->ah_radio_2ghz_revision);
+                }
+        }
+
+
+        /* ready to process interrupts */
+        __clear_bit(ATH_STAT_INVALID, sc->status);
+
+        return 0;
+err_ah:
+        ath5k_hw_detach(sc->ah);
+err_irq:
+        free_irq(pdev->irq, sc);
+err_free:
+        pci_disable_msi(pdev);
+        ieee80211_free_hw(hw);
+err_map:
+        pci_iounmap(pdev, mem);
+err_reg:
+        pci_release_region(pdev, 0);
+err_dis:
+        pci_disable_device(pdev);
+err:
+        return ret;
+}
+
+static void __devexit
+ath5k_pci_remove(struct pci_dev *pdev)
+{
+        struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+        struct ath5k_softc *sc = hw->priv;
+
+        ath5k_debug_finish_device(sc);
+        ath5k_detach(pdev, hw);
+        ath5k_hw_detach(sc->ah);
+        free_irq(pdev->irq, sc);
+        pci_disable_msi(pdev);
+        pci_iounmap(pdev, sc->iobase);
+        pci_release_region(pdev, 0);
+        pci_disable_device(pdev);
+        ieee80211_free_hw(hw);
+}
+
+#ifdef CONFIG_PM
+static int
+ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+        struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+        struct ath5k_softc *sc = hw->priv;
+
+        if (test_bit(ATH_STAT_LEDSOFT, sc->status))
+                ath5k_hw_set_gpio(sc->ah, sc->led_pin, 1);
+
+        ath5k_stop_hw(sc);
+        pci_save_state(pdev);
+        pci_disable_device(pdev);
+        pci_set_power_state(pdev, PCI_D3hot);
+
+        return 0;
+}
+
+static int
+ath5k_pci_resume(struct pci_dev *pdev)
+{
+        struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+        struct ath5k_softc *sc = hw->priv;
+        int err;
+
+        err = pci_set_power_state(pdev, PCI_D0);
+        if (err)
+                return err;
+
+        err = pci_enable_device(pdev);
+        if (err)
+                return err;
+
+        pci_restore_state(pdev);
+        /*
+         * Suspend/Resume resets the PCI configuration space, so we have to
+         * re-disable the RETRY_TIMEOUT register (0x41) to keep
+         * PCI Tx retries from interfering with C3 CPU state
+         */
+        pci_write_config_byte(pdev, 0x41, 0);
+
+        ath5k_init(sc);
+        if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
+                ath5k_hw_set_gpio_output(sc->ah, sc->led_pin);
+                ath5k_hw_set_gpio(sc->ah, sc->led_pin, 0);
+        }
+
+        return 0;
+}
+#endif /* CONFIG_PM */
+
+
+
+/***********************\
+* Driver Initialization *
+\***********************/
+
+static int
+ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
+{
+        struct ath5k_softc *sc = hw->priv;
+        struct ath5k_hw *ah = sc->ah;
+        u8 mac[ETH_ALEN];
+        unsigned int i;
+        int ret;
+
+        ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
+
+        /*
+         * Check if the MAC has multi-rate retry support.
+         * We do this by trying to setup a fake extended
+         * descriptor.  MAC's that don't have support will
+         * return false w/o doing anything.  MAC's that do
+         * support it will return true w/o doing anything.
+         */
+        if (ah->ah_setup_xtx_desc(ah, NULL, 0, 0, 0, 0, 0, 0))
+                __set_bit(ATH_STAT_MRRETRY, sc->status);
+
+        /*
+         * Reset the key cache since some parts do not
+         * reset the contents on initial power up.
+         */
+        for (i = 0; i < AR5K_KEYCACHE_SIZE; i++)
+                ath5k_hw_reset_key(ah, i);
+
+        /*
+         * Collect the channel list.  The 802.11 layer
+         * is resposible for filtering this list based
+         * on settings like the phy mode and regulatory
+         * domain restrictions.
+         */
+        ret = ath5k_getchannels(hw);
+        if (ret) {
+                ATH5K_ERR(sc, "can't get channels\n");
+                goto err;
+        }
+
+        /* NB: setup here so ath5k_rate_update is happy */
+        if (test_bit(MODE_IEEE80211A, ah->ah_modes))
+                ath5k_setcurmode(sc, MODE_IEEE80211A);
+        else
+                ath5k_setcurmode(sc, MODE_IEEE80211B);
+
+        /*
+         * Allocate tx+rx descriptors and populate the lists.
+         */
+        ret = ath5k_desc_alloc(sc, pdev);
+        if (ret) {
+                ATH5K_ERR(sc, "can't allocate descriptors\n");
+                goto err;
+        }
+
+        /*
+         * Allocate hardware transmit queues: one queue for
+         * beacon frames and one data queue for each QoS
+         * priority.  Note that hw functions handle reseting
+         * these queues at the needed time.
+         */
+        ret = ath5k_beaconq_setup(ah);
+        if (ret < 0) {
+                ATH5K_ERR(sc, "can't setup a beacon xmit queue\n");
+                goto err_desc;
+        }
+        sc->bhalq = ret;
+
+        sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
+        if (IS_ERR(sc->txq)) {
+                ATH5K_ERR(sc, "can't setup xmit queue\n");
+                ret = PTR_ERR(sc->txq);
+                goto err_bhal;
+        }
+
+        tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
+        tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
+        tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc);
+        setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc);
+        setup_timer(&sc->led_tim, ath5k_led_off, (unsigned long)sc);
+
+        sc->led_on = 0; /* low true */
+        /*
+         * Auto-enable soft led processing for IBM cards and for
+         * 5211 minipci cards.
+         */
+        if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM ||
+                        pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
+                __set_bit(ATH_STAT_LEDSOFT, sc->status);
+                sc->led_pin = 0;
+        }
+        /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
+        if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
+                __set_bit(ATH_STAT_LEDSOFT, sc->status);
+                sc->led_pin = 0;
+        }
+        if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
+                ath5k_hw_set_gpio_output(ah, sc->led_pin);
+                ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on);
+        }
+
+        ath5k_hw_get_lladdr(ah, mac);
+        SET_IEEE80211_PERM_ADDR(hw, mac);
+        /* All MAC address bits matter for ACKs */
+        memset(sc->bssidmask, 0xff, ETH_ALEN);
+        ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
+
+        ret = ieee80211_register_hw(hw);
+        if (ret) {
+                ATH5K_ERR(sc, "can't register ieee80211 hw\n");
+                goto err_queues;
+        }
+
+        return 0;
+err_queues:
+        ath5k_txq_release(sc);
+err_bhal:
+        ath5k_hw_release_tx_queue(ah, sc->bhalq);
+err_desc:
+        ath5k_desc_free(sc, pdev);
+err:
+        return ret;
+}
+
+static void
+ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
+{
+        struct ath5k_softc *sc = hw->priv;
+
+        /*
+         * NB: the order of these is important:
+         * o call the 802.11 layer before detaching ath5k_hw to
+         *   insure callbacks into the driver to delete global
+         *   key cache entries can be handled
+         * o reclaim the tx queue data structures after calling
+         *   the 802.11 layer as we'll get called back to reclaim
+         *   node state and potentially want to use them
+         * o to cleanup the tx queues the hal is called, so detach
+         *   it last
+         * XXX: ??? detach ath5k_hw ???
+         * Other than that, it's straightforward...
+         */
+        ieee80211_unregister_hw(hw);
+        ath5k_desc_free(sc, pdev);
+        ath5k_txq_release(sc);
+        ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
+
+        /*
+         * NB: can't reclaim these until after ieee80211_ifdetach
+         * returns because we'll get called back to reclaim node
+         * state and potentially want to use them.
+         */
+}
+
+
+
+
+/********************\
+* Channel/mode setup *
+\********************/
+
+/*
+ * Convert IEEE channel number to MHz frequency.
+ */
+static inline short
+ath5k_ieee2mhz(short chan)
+{
+        if (chan <= 14 || chan >= 27)
+                return ieee80211chan2mhz(chan);
+        else
+                return 2212 + chan * 20;
+}
+
+static unsigned int
+ath5k_copy_rates(struct ieee80211_rate *rates,
+                const struct ath5k_rate_table *rt,
+                unsigned int max)
+{
+        unsigned int i, count;
+
+        if (rt == NULL)
+                return 0;
+
+        for (i = 0, count = 0; i < rt->rate_count && max > 0; i++) {
+                if (!rt->rates[i].valid)
+                        continue;
+                rates->rate = rt->rates[i].rate_kbps / 100;
+                rates->val = rt->rates[i].rate_code;
+                rates->flags = rt->rates[i].modulation;
+                rates++;
+                count++;
+                max--;
+        }
+
+        return count;
+}
+
+static unsigned int
+ath5k_copy_channels(struct ath5k_hw *ah,
+                struct ieee80211_channel *channels,
+                unsigned int mode,
+                unsigned int max)
+{
+        static const struct { unsigned int mode, mask, chan; } map[] = {
+                [MODE_IEEE80211A] = { CHANNEL_OFDM, CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_A },
+                [MODE_ATHEROS_TURBO] = { CHANNEL_OFDM|CHANNEL_TURBO, CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_T },
+                [MODE_IEEE80211B] = { CHANNEL_CCK, CHANNEL_CCK, CHANNEL_B },
+                [MODE_IEEE80211G] = { CHANNEL_OFDM, CHANNEL_OFDM, CHANNEL_G },
+                [MODE_ATHEROS_TURBOG] = { CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_TG },
+        };
+        static const struct ath5k_regchannel chans_2ghz[] =
+                IEEE80211_CHANNELS_2GHZ;
+        static const struct ath5k_regchannel chans_5ghz[] =
+                IEEE80211_CHANNELS_5GHZ;
+        const struct ath5k_regchannel *chans;
+        enum ath5k_regdom dmn;
+        unsigned int i, count, size, chfreq, all, f, ch;
+
+        if (!test_bit(mode, ah->ah_modes))
+                return 0;
+
+        all = ah->ah_regdomain == DMN_DEFAULT || CHAN_DEBUG == 1;
+
+        switch (mode) {
+        case MODE_IEEE80211A:
+        case MODE_ATHEROS_TURBO:
+                /* 1..220, but 2GHz frequencies are filtered by check_channel */
+                size = all ? 220 : ARRAY_SIZE(chans_5ghz);
+                chans = chans_5ghz;
+                dmn = ath5k_regdom2flag(ah->ah_regdomain,
+                                IEEE80211_CHANNELS_5GHZ_MIN);
+                chfreq = CHANNEL_5GHZ;
+                break;
+        case MODE_IEEE80211B:
+        case MODE_IEEE80211G:
+        case MODE_ATHEROS_TURBOG:
+                size = all ? 26 : ARRAY_SIZE(chans_2ghz);
+                chans = chans_2ghz;
+                dmn = ath5k_regdom2flag(ah->ah_regdomain,
+                                IEEE80211_CHANNELS_2GHZ_MIN);
+                chfreq = CHANNEL_2GHZ;
+                break;
+        default:
+                ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n");
+                return 0;
+        }
+
+        for (i = 0, count = 0; i < size && max > 0; i++) {
+                ch = all ? i + 1 : chans[i].chan;
+                f = ath5k_ieee2mhz(ch);
+                /* Check if channel is supported by the chipset */
+                if (!ath5k_channel_ok(ah, f, chfreq))
+                        continue;
+
+                /* Match regulation domain */
+                if (!all && !(IEEE80211_DMN(chans[i].domain) &
+                                                        IEEE80211_DMN(dmn)))
+                        continue;
+
+                if (!all && (chans[i].mode & map[mode].mask) != map[mode].mode)
+                        continue;
+
+                /* Write channel and increment counter */
+                channels->chan = ch;
+                channels->freq = f;
+                channels->val = map[mode].chan;
+                channels++;
+                count++;
+                max--;
+        }
+
+        return count;
+}
+
+/* Only tries to register modes our EEPROM says it can support */
+#define REGISTER_MODE(m) do { \
+        ret = ath5k_register_mode(hw, m); \
+        if (ret) \
+                return ret; \
+} while (0) \
+
+static inline int
+ath5k_register_mode(struct ieee80211_hw *hw, u8 m)
+{
+        struct ath5k_softc *sc = hw->priv;
+        struct ieee80211_hw_mode *modes = sc->modes;
+        unsigned int i;
+        int ret;
+
+        if (!test_bit(m, sc->ah->ah_capabilities.cap_mode))
+                return 0;
+
+        for (i = 0; i < NUM_DRIVER_MODES; i++) {
+                if (modes[i].mode != m || !modes[i].num_channels)
+                        continue;
+                ret = ieee80211_register_hwmode(hw, &modes[i]);
+                if (ret) {
+                        ATH5K_ERR(sc, "can't register hwmode %u\n", m);
+                        return ret;
+                }
+                return 0;
+        }
+        BUG();
+}
+
+static int
+ath5k_getchannels(struct ieee80211_hw *hw)
+{
+        struct ath5k_softc *sc = hw->priv;
+        struct ath5k_hw *ah = sc->ah;
+        struct ieee80211_hw_mode *modes = sc->modes;
+        unsigned int i, max_r, max_c;
+        int ret;
+
+        BUILD_BUG_ON(ARRAY_SIZE(sc->modes) < 3);
+
+        /* The order here does not matter */
+        modes[0].mode = MODE_IEEE80211G;
+        modes[1].mode = MODE_IEEE80211B;
+        modes[2].mode = MODE_IEEE80211A;
+
+        max_r = ARRAY_SIZE(sc->rates);
+        max_c = ARRAY_SIZE(sc->channels);
+
+        for (i = 0; i < NUM_DRIVER_MODES; i++) {
+                struct ieee80211_hw_mode *mode = &modes[i];
+                const struct ath5k_rate_table *hw_rates;
+
+                if (i == 0) {
+                        modes[0].rates  = sc->rates;
+                        modes->channels = sc->channels;
+                } else {
+                        struct ieee80211_hw_mode *prev_mode = &modes[i-1];
+                        int prev_num_r  = prev_mode->num_rates;
+                        int prev_num_c  = prev_mode->num_channels;
+                        mode->rates     = &prev_mode->rates[prev_num_r];
+                        mode->channels  = &prev_mode->channels[prev_num_c];
+                }
+
+                hw_rates = ath5k_hw_get_rate_table(ah, mode->mode);
+                mode->num_rates    = ath5k_copy_rates(mode->rates, hw_rates,
+                        max_r);
+                mode->num_channels = ath5k_copy_channels(ah, mode->channels,
+                        mode->mode, max_c);
+                max_r -= mode->num_rates;
+                max_c -= mode->num_channels;
+        }
+
+        /* We try to register all modes this driver supports. We don't bother
+         * with MODE_IEEE80211B for AR5212 as MODE_IEEE80211G already accounts
+         * for that as per mac80211. Then, REGISTER_MODE() will will actually
+         * check the eeprom reading for more reliable capability information.
+         * Order matters here as per mac80211's latest preference. This will
+         * all hopefullly soon go away. */
+
+        REGISTER_MODE(MODE_IEEE80211G);
+        if (ah->ah_version != AR5K_AR5212)
+                REGISTER_MODE(MODE_IEEE80211B);
+        REGISTER_MODE(MODE_IEEE80211A);
+
+        ath5k_debug_dump_modes(sc, modes);
+
+        return ret;
+}
+
+/*
+ * Set/change channels.  If the channel is really being changed,
+ * it's done by reseting the chip.  To accomplish this we must
+ * first cleanup any pending DMA, then restart stuff after a la
+ * ath5k_init.
+ */
+static int
+ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
+{
+        struct ath5k_hw *ah = sc->ah;
+        int ret;
+
+        ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "%u (%u MHz) -> %u (%u MHz)\n",
+                sc->curchan->chan, sc->curchan->freq,
+                chan->chan, chan->freq);
+
+        if (chan->freq != sc->curchan->freq || chan->val != sc->curchan->val) {
+                /*
+                 * To switch channels clear any pending DMA operations;
+                 * wait long enough for the RX fifo to drain, reset the
+                 * hardware at the new frequency, and then re-enable
+                 * the relevant bits of the h/w.
+                 */
+                ath5k_hw_set_intr(ah, 0);       /* disable interrupts */
+                ath5k_txq_cleanup(sc);          /* clear pending tx frames */
+                ath5k_rx_stop(sc);              /* turn off frame recv */
+                ret = ath5k_hw_reset(ah, sc->opmode, chan, true);
+                if (ret) {
+                        ATH5K_ERR(sc, "%s: unable to reset channel %u "
+                                "(%u Mhz)\n", __func__, chan->chan, chan->freq);
+                        return ret;
+                }
+                sc->curchan = chan;
+                ath5k_hw_set_txpower_limit(sc->ah, 0);
+
+                /*
+                 * Re-enable rx framework.
+                 */
+                ret = ath5k_rx_start(sc);
+                if (ret) {
+                        ATH5K_ERR(sc, "%s: unable to restart recv logic\n",
+                                        __func__);
+                        return ret;
+                }
+
+                /*
+                 * Change channels and update the h/w rate map
+                 * if we're switching; e.g. 11a to 11b/g.
+                 *
+                 * XXX needed?
+                 */
+/*              ath5k_chan_change(sc, chan); */
+
+                ath5k_beacon_config(sc);
+                /*
+                 * Re-enable interrupts.
+                 */
+                ath5k_hw_set_intr(ah, sc->imask);
+        }
+
+        return 0;
+}
+
+static void
+ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
+{
+        if (unlikely(test_bit(ATH_STAT_LEDSOFT, sc->status))) {
+                /* from Atheros NDIS driver, w/ permission */
+                static const struct {
+                        u16 rate;       /* tx/rx 802.11 rate */
+                        u16 timeOn;     /* LED on time (ms) */
+                        u16 timeOff;    /* LED off time (ms) */
+                } blinkrates[] = {
+                        { 108,  40,  10 },
+                        {  96,  44,  11 },
+                        {  72,  50,  13 },
+                        {  48,  57,  14 },
+                        {  36,  67,  16 },
+                        {  24,  80,  20 },
+                        {  22, 100,  25 },
+                        {  18, 133,  34 },
+                        {  12, 160,  40 },
+                        {  10, 200,  50 },
+                        {   6, 240,  58 },
+                        {   4, 267,  66 },
+                        {   2, 400, 100 },
+                        {   0, 500, 130 }
+                };
+                const struct ath5k_rate_table *rt =
+                                ath5k_hw_get_rate_table(sc->ah, mode);
+                unsigned int i, j;
+
+                BUG_ON(rt == NULL);
+
+                memset(sc->hwmap, 0, sizeof(sc->hwmap));
+                for (i = 0; i < 32; i++) {
+                        u8 ix = rt->rate_code_to_index[i];
+                        if (ix == 0xff) {
+                                sc->hwmap[i].ledon = msecs_to_jiffies(500);
+                                sc->hwmap[i].ledoff = msecs_to_jiffies(130);
+                                continue;
+                        }
+                        sc->hwmap[i].txflags = IEEE80211_RADIOTAP_F_DATAPAD;
+                        if (SHPREAMBLE_FLAG(ix) || rt->rates[ix].modulation ==
+                                        IEEE80211_RATE_OFDM)
+                                sc->hwmap[i].txflags |=
+                                                IEEE80211_RADIOTAP_F_SHORTPRE;
+                        /* receive frames include FCS */
+                        sc->hwmap[i].rxflags = sc->hwmap[i].txflags |
+                                        IEEE80211_RADIOTAP_F_FCS;
+                        /* setup blink rate table to avoid per-packet lookup */
+                        for (j = 0; j < ARRAY_SIZE(blinkrates) - 1; j++)
+                                if (blinkrates[j].rate == /* XXX why 7f? */
+                                                (rt->rates[ix].dot11_rate&0x7f))
+                                        break;
+
+                        sc->hwmap[i].ledon = msecs_to_jiffies(blinkrates[j].
+                                        timeOn);
+                        sc->hwmap[i].ledoff = msecs_to_jiffies(blinkrates[j].
+                                        timeOff);
+                }
+        }
+
+        sc->curmode = mode;
+}
+
+static void
+ath5k_mode_setup(struct ath5k_softc *sc)
+{
+        struct ath5k_hw *ah = sc->ah;
+        u32 rfilt;
+
+        /* configure rx filter */
+        rfilt = sc->filter_flags;
+        ath5k_hw_set_rx_filter(ah, rfilt);
+
+        if (ath5k_hw_hasbssidmask(ah))
+                ath5k_hw_set_bssid_mask(ah, sc->bssidmask);
+
+        /* configure operational mode */
+        ath5k_hw_set_opmode(ah);
+
+        ath5k_hw_set_mcast_filter(ah, 0, 0);
+        ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
+}
+
+
+
+
+/***************\
+* Buffers setup *
+\***************/
+
+static int
+ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
+{
+        struct ath5k_hw *ah = sc->ah;
+        struct sk_buff *skb = bf->skb;
+        struct ath5k_desc *ds;
+
+        if (likely(skb == NULL)) {
+                unsigned int off;
+
+                /*
+                 * Allocate buffer with headroom_needed space for the
+                 * fake physical layer header at the start.
+                 */
+                skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1);
+                if (unlikely(skb == NULL)) {
+                        ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
+                                        sc->rxbufsize + sc->cachelsz - 1);
+                        return -ENOMEM;
+                }
+                /*
+                 * Cache-line-align.  This is important (for the
+                 * 5210 at least) as not doing so causes bogus data
+                 * in rx'd frames.
+                 */
+                off = ((unsigned long)skb->data) % sc->cachelsz;
+                if (off != 0)
+                        skb_reserve(skb, sc->cachelsz - off);
+
+                bf->skb = skb;
+                bf->skbaddr = pci_map_single(sc->pdev,
+                        skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
+                if (unlikely(pci_dma_mapping_error(bf->skbaddr))) {
+                        ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
+                        dev_kfree_skb(skb);
+                        bf->skb = NULL;
+                        return -ENOMEM;
+                }
+        }
+
+        /*
+         * Setup descriptors.  For receive we always terminate
+         * the descriptor list with a self-linked entry so we'll
+         * not get overrun under high load (as can happen with a
+         * 5212 when ANI processing enables PHY error frames).
+         *
+         * To insure the last descriptor is self-linked we create
+         * each descriptor as self-linked and add it to the end.  As
+         * each additional descriptor is added the previous self-linked
+         * entry is ``fixed'' naturally.  This should be safe even
+         * if DMA is happening.  When processing RX interrupts we
+         * never remove/process the last, self-linked, entry on the
+         * descriptor list.  This insures the hardware always has
+         * someplace to write a new frame.
+         */
+        ds = bf->desc;
+        ds->ds_link = bf->daddr;        /* link to self */
+        ds->ds_data = bf->skbaddr;
+        ath5k_hw_setup_rx_desc(ah, ds,
+                skb_tailroom(skb),      /* buffer size */
+                0);
+
+        if (sc->rxlink != NULL)
+                *sc->rxlink = bf->daddr;
+        sc->rxlink = &ds->ds_link;
+        return 0;
+}
+
+static int
+ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
+                struct ieee80211_tx_control *ctl)
+{
+        struct ath5k_hw *ah = sc->ah;
+        struct ath5k_txq *txq = sc->txq;
+        struct ath5k_desc *ds = bf->desc;
+        struct sk_buff *skb = bf->skb;
+        unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
+        int ret;
+
+        flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
+        bf->ctl = *ctl;
+        /* XXX endianness */
+        bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
+                        PCI_DMA_TODEVICE);
+
+        if (ctl->flags & IEEE80211_TXCTL_NO_ACK)
+                flags |= AR5K_TXDESC_NOACK;
+
+        pktlen = skb->len + FCS_LEN;
+
+        if (!(ctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)) {
+                keyidx = ctl->key_idx;
+                pktlen += ctl->icv_len;
+        }
+
+        ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
+                ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
+                (ctl->power_level * 2), ctl->tx_rate, ctl->retry_limit, keyidx, 0, flags, 0, 0);
+        if (ret)
+                goto err_unmap;
+
+        ds->ds_link = 0;
+        ds->ds_data = bf->skbaddr;
+
+        spin_lock_bh(&txq->lock);
+        list_add_tail(&bf->list, &txq->q);
+        sc->tx_stats.data[txq->qnum].len++;
+        if (txq->link == NULL) /* is this first packet? */
+                ath5k_hw_put_tx_buf(ah, txq->qnum, bf->daddr);
+        else /* no, so only link it */
+                *txq->link = bf->daddr;
+
+        txq->link = &ds->ds_link;
+        ath5k_hw_tx_start(ah, txq->qnum);
+        spin_unlock_bh(&txq->lock);
+
+        return 0;
+err_unmap:
+        pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
+        return ret;
+}
+
+/*******************\
+* Descriptors setup *
+\*******************/
+
+static int
+ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
+{
+        struct ath5k_desc *ds;
+        struct ath5k_buf *bf;
+        dma_addr_t da;
+        unsigned int i;
+        int ret;
+
+        /* allocate descriptors */
+        sc->desc_len = sizeof(struct ath5k_desc) *
+                        (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
+        sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr);
+        if (sc->desc == NULL) {
+                ATH5K_ERR(sc, "can't allocate descriptors\n");
+                ret = -ENOMEM;
+                goto err;
+        }
+        ds = sc->desc;
+        da = sc->desc_daddr;
+        ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n",
+                ds, sc->desc_len, (unsigned long long)sc->desc_daddr);
+
+        bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF,
+                        sizeof(struct ath5k_buf), GFP_KERNEL);
+        if (bf == NULL) {
+                ATH5K_ERR(sc, "can't allocate bufptr\n");
+                ret = -ENOMEM;
+                goto err_free;
+        }
+        sc->bufptr = bf;
+
+        INIT_LIST_HEAD(&sc->rxbuf);
+        for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
+                bf->desc = ds;
+                bf->daddr = da;
+                list_add_tail(&bf->list, &sc->rxbuf);
+        }
+
+        INIT_LIST_HEAD(&sc->txbuf);
+        sc->txbuf_len = ATH_TXBUF;
+        for (i = 0; i < ATH_TXBUF; i++, bf++, ds++,
+                        da += sizeof(*ds)) {
+                bf->desc = ds;
+                bf->daddr = da;
+                list_add_tail(&bf->list, &sc->txbuf);
+        }
+
+        /* beacon buffer */
+        bf->desc = ds;
+        bf->daddr = da;
+        sc->bbuf = bf;
+
+        return 0;
+err_free:
+        pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
+err:
+        sc->desc = NULL;
+        return ret;
+}
+
+static void
+ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
+{
+        struct ath5k_buf *bf;
+
+        ath5k_txbuf_free(sc, sc->bbuf);
+        list_for_each_entry(bf, &sc->txbuf, list)
+                ath5k_txbuf_free(sc, bf);
+        list_for_each_entry(bf, &sc->rxbuf, list)
+                ath5k_txbuf_free(sc, bf);
+
+        /* Free memory associated with all descriptors */
+        pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
+
+        kfree(sc->bufptr);
+        sc->bufptr = NULL;
+}
+
+
+
+
+
+/**************\
+* Queues setup *
+\**************/
+
+static struct ath5k_txq *
+ath5k_txq_setup(struct ath5k_softc *sc,
+                int qtype, int subtype)
+{
+        struct ath5k_hw *ah = sc->ah;
+        struct ath5k_txq *txq;
+        struct ath5k_txq_info qi = {
+                .tqi_subtype = subtype,
+                .tqi_aifs = AR5K_TXQ_USEDEFAULT,
+                .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
+                .tqi_cw_max = AR5K_TXQ_USEDEFAULT
+        };
+        int qnum;
+
+        /*
+         * Enable interrupts only for EOL and DESC conditions.
+         * We mark tx descriptors to receive a DESC interrupt
+         * when a tx queue gets deep; otherwise waiting for the
+         * EOL to reap descriptors.  Note that this is done to
+         * reduce interrupt load and this only defers reaping
+         * descriptors, never transmitting frames.  Aside from
+         * reducing interrupts this also permits more concurrency.
+         * The only potential downside is if the tx queue backs
+         * up in which case the top half of the kernel may backup
+         * due to a lack of tx descriptors.
+         */
+        qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE |
+                                AR5K_TXQ_FLAG_TXDESCINT_ENABLE;
+        qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi);
+        if (qnum < 0) {
+                /*
+                 * NB: don't print a message, this happens
+                 * normally on parts with too few tx queues
+                 */
+                return ERR_PTR(qnum);
+        }
+        if (qnum >= ARRAY_SIZE(sc->txqs)) {
+                ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n",
+                        qnum, ARRAY_SIZE(sc->txqs));
+                ath5k_hw_release_tx_queue(ah, qnum);
+                return ERR_PTR(-EINVAL);
+        }
+        txq = &sc->txqs[qnum];
+        if (!txq->setup) {
+                txq->qnum = qnum;
+                txq->link = NULL;
+                INIT_LIST_HEAD(&txq->q);
+                spin_lock_init(&txq->lock);
+                txq->setup = true;
+        }
+        return &sc->txqs[qnum];
+}
+
+static int
+ath5k_beaconq_setup(struct ath5k_hw *ah)
+{
+        struct ath5k_txq_info qi = {
+                .tqi_aifs = AR5K_TXQ_USEDEFAULT,
+                .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
+                .tqi_cw_max = AR5K_TXQ_USEDEFAULT,
+                /* NB: for dynamic turbo, don't enable any other interrupts */
+                .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE
+        };
+
+        return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi);
+}
+
+static int
+ath5k_beaconq_config(struct ath5k_softc *sc)
+{
+        struct ath5k_hw *ah = sc->ah;
+        struct ath5k_txq_info qi;
+        int ret;
+
+        ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
+        if (ret)
+                return ret;
+        if (sc->opmode == IEEE80211_IF_TYPE_AP ||
+            sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+                /*
+                 * Always burst out beacon and CAB traffic
+                 * (aifs = cwmin = cwmax = 0)
+                 */
+                qi.tqi_aifs = 0;
+                qi.tqi_cw_min = 0;
+                qi.tqi_cw_max = 0;
+        }
+
+        ret = ath5k_hw_setup_tx_queueprops(ah, sc->bhalq, &qi);
+        if (ret) {
+                ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
+                        "hardware queue!\n", __func__);
+                return ret;
+        }
+
+        return ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */;
+}
+
+static void
+ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
+{
+        struct ath5k_buf *bf, *bf0;
+
+        /*
+         * NB: this assumes output has been stopped and
+         *     we do not need to block ath5k_tx_tasklet
+         */
+        spin_lock_bh(&txq->lock);
+        list_for_each_entry_safe(bf, bf0, &txq->q, list) {
+                ath5k_debug_printtxbuf(sc, bf, !sc->ah->ah_proc_tx_desc(sc->ah,
+                                        bf->desc));
+
+                ath5k_txbuf_free(sc, bf);
+
+                spin_lock_bh(&sc->txbuflock);
+                sc->tx_stats.data[txq->qnum].len--;
+                list_move_tail(&bf->list, &sc->txbuf);
+                sc->txbuf_len++;
+                spin_unlock_bh(&sc->txbuflock);
+        }
+        txq->link = NULL;
+        spin_unlock_bh(&txq->lock);
+}
+
+/*
+ * Drain the transmit queues and reclaim resources.
+ */
+static void
+ath5k_txq_cleanup(struct ath5k_softc *sc)
+{
+        struct ath5k_hw *ah = sc->ah;
+        unsigned int i;
+
+        /* XXX return value */
+        if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) {
+                /* don't touch the hardware if marked invalid */
+                ath5k_hw_stop_tx_dma(ah, sc->bhalq);
+                ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
+                        ath5k_hw_get_tx_buf(ah, sc->bhalq));
+                for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
+                        if (sc->txqs[i].setup) {
+                                ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
+                                ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
+                                        "link %p\n",
+                                        sc->txqs[i].qnum,
+                                        ath5k_hw_get_tx_buf(ah,
+                                                        sc->txqs[i].qnum),
+                                        sc->txqs[i].link);
+                        }
+        }
+        ieee80211_start_queues(sc->hw); /* XXX move to callers */
+
+        for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
+                if (sc->txqs[i].setup)
+                        ath5k_txq_drainq(sc, &sc->txqs[i]);
+}
+
+static void
+ath5k_txq_release(struct ath5k_softc *sc)
+{
+        struct ath5k_txq *txq = sc->txqs;
+        unsigned int i;
+
+        for (i = 0; i < ARRAY_SIZE(sc->txqs); i++, txq++)
+                if (txq->setup) {
+                        ath5k_hw_release_tx_queue(sc->ah, txq->qnum);
+                        txq->setup = false;
+                }
+}
+
+
+
+
+/*************\
+* RX Handling *
+\*************/
+
+/*
+ * Enable the receive h/w following a reset.
+ */
+static int
+ath5k_rx_start(struct ath5k_softc *sc)
+{
+        struct ath5k_hw *ah = sc->ah;
+        struct ath5k_buf *bf;
+        int ret;
+
+        sc->rxbufsize = roundup(IEEE80211_MAX_LEN, sc->cachelsz);
+
+        ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rxbufsize %u\n",
+                sc->cachelsz, sc->rxbufsize);
+
+        sc->rxlink = NULL;
+
+        spin_lock_bh(&sc->rxbuflock);
+        list_for_each_entry(bf, &sc->rxbuf, list) {
+                ret = ath5k_rxbuf_setup(sc, bf);
+                if (ret != 0) {
+                        spin_unlock_bh(&sc->rxbuflock);
+                        goto err;
+                }
+        }
+        bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
+        spin_unlock_bh(&sc->rxbuflock);
+
+        ath5k_hw_put_rx_buf(ah, bf->daddr);
+        ath5k_hw_start_rx(ah);          /* enable recv descriptors */
+        ath5k_mode_setup(sc);           /* set filters, etc. */
+        ath5k_hw_start_rx_pcu(ah);      /* re-enable PCU/DMA engine */
+
+        return 0;
+err:
+        return ret;
+}
+
+/*
+ * Disable the receive h/w in preparation for a reset.
+ */
+static void
+ath5k_rx_stop(struct ath5k_softc *sc)
+{
+        struct ath5k_hw *ah = sc->ah;
+
+        ath5k_hw_stop_pcu_recv(ah);     /* disable PCU */
+        ath5k_hw_set_rx_filter(ah, 0);  /* clear recv filter */
+        ath5k_hw_stop_rx_dma(ah);       /* disable DMA engine */
+        mdelay(3);                      /* 3ms is long enough for 1 frame */
+
+        ath5k_debug_printrxbuffs(sc, ah);
+
+        sc->rxlink = NULL;              /* just in case */
+}
+
+static unsigned int
+ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds,
+                struct sk_buff *skb)
+{
+        struct ieee80211_hdr *hdr = (void *)skb->data;
+        unsigned int keyix, hlen = ieee80211_get_hdrlen_from_skb(skb);
+
+        if (!(ds->ds_rxstat.rs_status & AR5K_RXERR_DECRYPT) &&
+                        ds->ds_rxstat.rs_keyix != AR5K_RXKEYIX_INVALID)
+                return RX_FLAG_DECRYPTED;
+
+        /* Apparently when a default key is used to decrypt the packet
+           the hw does not set the index used to decrypt.  In such cases
+           get the index from the packet. */
+        if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED) &&
+                        !(ds->ds_rxstat.rs_status & AR5K_RXERR_DECRYPT) &&
+                        skb->len >= hlen + 4) {
+                keyix = skb->data[hlen + 3] >> 6;
+
+                if (test_bit(keyix, sc->keymap))
+                        return RX_FLAG_DECRYPTED;
+        }
+
+        return 0;
+}
+
+static void
+ath5k_tasklet_rx(unsigned long data)
+{
+        struct ieee80211_rx_status rxs = {};
+        struct sk_buff *skb;
+        struct ath5k_softc *sc = (void *)data;
+        struct ath5k_buf *bf;
+        struct ath5k_desc *ds;
+        u16 len;
+        u8 stat;
+        int ret;
+        int hdrlen;
+        int pad;
+
+        spin_lock(&sc->rxbuflock);
+        do {
+                if (unlikely(list_empty(&sc->rxbuf))) {
+                        ATH5K_WARN(sc, "empty rx buf pool\n");
+                        break;
+                }
+                bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
+                BUG_ON(bf->skb == NULL);
+                skb = bf->skb;
+                ds = bf->desc;
+
+                /* TODO only one segment */
+                pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
+                                sc->desc_len, PCI_DMA_FROMDEVICE);
+
+                if (unlikely(ds->ds_link == bf->daddr)) /* this is the end */
+                        break;
+
+                ret = sc->ah->ah_proc_rx_desc(sc->ah, ds);
+                if (unlikely(ret == -EINPROGRESS))
+                        break;
+                else if (unlikely(ret)) {
+                        ATH5K_ERR(sc, "error in processing rx descriptor\n");
+                        return;
+                }
+
+                if (unlikely(ds->ds_rxstat.rs_more)) {
+                        ATH5K_WARN(sc, "unsupported jumbo\n");
+                        goto next;
+                }
+
+                stat = ds->ds_rxstat.rs_status;
+                if (unlikely(stat)) {
+                        if (stat & AR5K_RXERR_PHY)
+                                goto next;
+                        if (stat & AR5K_RXERR_DECRYPT) {
+                                /*
+                                 * Decrypt error.  If the error occurred
+                                 * because there was no hardware key, then
+                                 * let the frame through so the upper layers
+                                 * can process it.  This is necessary for 5210
+                                 * parts which have no way to setup a ``clear''
+                                 * key cache entry.
+                                 *
+                                 * XXX do key cache faulting
+                                 */
+                                if (ds->ds_rxstat.rs_keyix ==
+                                                AR5K_RXKEYIX_INVALID &&
+                                                !(stat & AR5K_RXERR_CRC))
+                                        goto accept;
+                        }
+                        if (stat & AR5K_RXERR_MIC) {
+                                rxs.flag |= RX_FLAG_MMIC_ERROR;
+                                goto accept;
+                        }
+
+                        /* let crypto-error packets fall through in MNTR */
+                        if ((stat & ~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) ||
+                                        sc->opmode != IEEE80211_IF_TYPE_MNTR)
+                                goto next;
+                }
+accept:
+                len = ds->ds_rxstat.rs_datalen;
+                pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, len,
+                                PCI_DMA_FROMDEVICE);
+                pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
+                                PCI_DMA_FROMDEVICE);
+                bf->skb = NULL;
+
+                skb_put(skb, len);
+
+                /*
+                 * the hardware adds a padding to 4 byte boundaries between
+                 * the header and the payload data if the header length is
+                 * not multiples of 4 - remove it
+                 */
+                hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+                if (hdrlen & 3) {
+                        pad = hdrlen % 4;
+                        memmove(skb->data + pad, skb->data, hdrlen);
+                        skb_pull(skb, pad);
+                }
+
+                if (sc->opmode == IEEE80211_IF_TYPE_MNTR)
+                        rxs.mactime = ath5k_extend_tsf(sc->ah,
+                                        ds->ds_rxstat.rs_tstamp);
+                else
+                        rxs.mactime = ds->ds_rxstat.rs_tstamp;
+                rxs.freq = sc->curchan->freq;
+                rxs.channel = sc->curchan->chan;
+                rxs.phymode = sc->curmode;
+
+                /*
+                 * signal quality:
+                 * the names here are misleading and the usage of these
+                 * values by iwconfig makes it even worse
+                 */
+                /* noise floor in dBm, from the last noise calibration */
+                rxs.noise = sc->ah->ah_noise_floor;
+                /* signal level in dBm */
+                rxs.ssi = rxs.noise + ds->ds_rxstat.rs_rssi;
+                /*
+                 * "signal" is actually displayed as Link Quality by iwconfig
+                 * we provide a percentage based on rssi (assuming max rssi 64)
+                 */
+                rxs.signal = ds->ds_rxstat.rs_rssi * 100 / 64;
+
+                rxs.antenna = ds->ds_rxstat.rs_antenna;
+                rxs.rate = ds->ds_rxstat.rs_rate;
+                rxs.flag |= ath5k_rx_decrypted(sc, ds, skb);
+
+                ath5k_debug_dump_skb(sc, skb, "RX  ", 0);
+
+                __ieee80211_rx(sc->hw, skb, &rxs);
+                sc->led_rxrate = ds->ds_rxstat.rs_rate;
+                ath5k_led_event(sc, ATH_LED_RX);
+next:
+                list_move_tail(&bf->list, &sc->rxbuf);
+        } while (ath5k_rxbuf_setup(sc, bf) == 0);
+        spin_unlock(&sc->rxbuflock);
+}
+
+
+
+
+/*************\
+* TX Handling *
+\*************/
+
+static void
+ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
+{
+        struct ieee80211_tx_status txs = {};
+        struct ath5k_buf *bf, *bf0;
+        struct ath5k_desc *ds;
+        struct sk_buff *skb;
+        int ret;
+
+        spin_lock(&txq->lock);
+        list_for_each_entry_safe(bf, bf0, &txq->q, list) {
+                ds = bf->desc;
+
+                /* TODO only one segment */
+                pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
+                                sc->desc_len, PCI_DMA_FROMDEVICE);
+                ret = sc->ah->ah_proc_tx_desc(sc->ah, ds);
+                if (unlikely(ret == -EINPROGRESS))
+                        break;
+                else if (unlikely(ret)) {
+                        ATH5K_ERR(sc, "error %d while processing queue %u\n",
+                                ret, txq->qnum);
+                        break;
+                }
+
+                skb = bf->skb;
+                bf->skb = NULL;
+                pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
+                                PCI_DMA_TODEVICE);
+
+                txs.control = bf->ctl;
+                txs.retry_count = ds->ds_txstat.ts_shortretry +
+                        ds->ds_txstat.ts_longretry / 6;
+                if (unlikely(ds->ds_txstat.ts_status)) {
+                        sc->ll_stats.dot11ACKFailureCount++;
+                        if (ds->ds_txstat.ts_status & AR5K_TXERR_XRETRY)
+                                txs.excessive_retries = 1;
+                        else if (ds->ds_txstat.ts_status & AR5K_TXERR_FILT)
+                                txs.flags |= IEEE80211_TX_STATUS_TX_FILTERED;
+                } else {
+                        txs.flags |= IEEE80211_TX_STATUS_ACK;
+                        txs.ack_signal = ds->ds_txstat.ts_rssi;
+                }
+
+                ieee80211_tx_status(sc->hw, skb, &txs);
+                sc->tx_stats.data[txq->qnum].count++;
+
+                spin_lock(&sc->txbuflock);
+                sc->tx_stats.data[txq->qnum].len--;
+                list_move_tail(&bf->list, &sc->txbuf);
+                sc->txbuf_len++;
+                spin_unlock(&sc->txbuflock);
+        }
+        if (likely(list_empty(&txq->q)))
+                txq->link = NULL;
+        spin_unlock(&txq->lock);
+        if (sc->txbuf_len > ATH_TXBUF / 5)
+                ieee80211_wake_queues(sc->hw);
+}
+
+static void
+ath5k_tasklet_tx(unsigned long data)
+{
+        struct ath5k_softc *sc = (void *)data;
+
+        ath5k_tx_processq(sc, sc->txq);
+
+        ath5k_led_event(sc, ATH_LED_TX);
+}
+
+
+
+
+/*****************\
+* Beacon handling *
+\*****************/
+
+/*
+ * Setup the beacon frame for transmit.
+ */
+static int
+ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
+                struct ieee80211_tx_control *ctl)
+{
+        struct sk_buff *skb = bf->skb;
+        struct ath5k_hw *ah = sc->ah;
+        struct ath5k_desc *ds;
+        int ret, antenna = 0;
+        u32 flags;
+
+        bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
+                        PCI_DMA_TODEVICE);
+        ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
+                        "skbaddr %llx\n", skb, skb->data, skb->len,
+                        (unsigned long long)bf->skbaddr);
+        if (pci_dma_mapping_error(bf->skbaddr)) {
+                ATH5K_ERR(sc, "beacon DMA mapping failed\n");
+                return -EIO;
+        }
+
+        ds = bf->desc;
+
+        flags = AR5K_TXDESC_NOACK;
+        if (sc->opmode == IEEE80211_IF_TYPE_IBSS && ath5k_hw_hasveol(ah)) {
+                ds->ds_link = bf->daddr;        /* self-linked */
+                flags |= AR5K_TXDESC_VEOL;
+                /*
+                 * Let hardware handle antenna switching if txantenna is not set
+                 */
+        } else {
+                ds->ds_link = 0;
+                /*
+                 * Switch antenna every 4 beacons if txantenna is not set
+                 * XXX assumes two antennas
+                 */
+                if (antenna == 0)
+                        antenna = sc->bsent & 4 ? 2 : 1;
+        }
+
+        ds->ds_data = bf->skbaddr;
+        ret = ah->ah_setup_tx_desc(ah, ds, skb->len + FCS_LEN,
+                        ieee80211_get_hdrlen_from_skb(skb),
+                        AR5K_PKT_TYPE_BEACON, (ctl->power_level * 2), ctl->tx_rate, 1,
+                        AR5K_TXKEYIX_INVALID, antenna, flags, 0, 0);
+        if (ret)
+                goto err_unmap;
+
+        return 0;
+err_unmap:
+        pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
+        return ret;
+}
+
+/*
+ * Transmit a beacon frame at SWBA.  Dynamic updates to the
+ * frame contents are done as needed and the slot time is
+ * also adjusted based on current state.
+ *
+ * this is usually called from interrupt context (ath5k_intr())
+ * but also from ath5k_beacon_config() in IBSS mode which in turn
+ * can be called from a tasklet and user context
+ */
+static void
+ath5k_beacon_send(struct ath5k_softc *sc)
+{
+        struct ath5k_buf *bf = sc->bbuf;
+        struct ath5k_hw *ah = sc->ah;
+
+        ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC, "in beacon_send\n");
+
+        if (unlikely(bf->skb == NULL || sc->opmode == IEEE80211_IF_TYPE_STA ||
+                        sc->opmode == IEEE80211_IF_TYPE_MNTR)) {
+                ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
+                return;
+        }
+        /*
+         * Check if the previous beacon has gone out.  If
+         * not don't don't try to post another, skip this
+         * period and wait for the next.  Missed beacons
+         * indicate a problem and should not occur.  If we
+         * miss too many consecutive beacons reset the device.
+         */
+        if (unlikely(ath5k_hw_num_tx_pending(ah, sc->bhalq) != 0)) {
+                sc->bmisscount++;
+                ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC,
+                        "missed %u consecutive beacons\n", sc->bmisscount);
+                if (sc->bmisscount > 3) {               /* NB: 3 is a guess */
+                        ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC,
+                                "stuck beacon time (%u missed)\n",
+                                sc->bmisscount);
+                        tasklet_schedule(&sc->restq);
+                }
+                return;
+        }
+        if (unlikely(sc->bmisscount != 0)) {
+                ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC,
+                        "resume beacon xmit after %u misses\n",
+                        sc->bmisscount);
+                sc->bmisscount = 0;
+        }
+
+        /*
+         * Stop any current dma and put the new frame on the queue.
+         * This should never fail since we check above that no frames
+         * are still pending on the queue.
+         */
+        if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
+                ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
+                /* NB: hw still stops DMA, so proceed */
+        }
+        pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, bf->skb->len,
+                        PCI_DMA_TODEVICE);
+
+        ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr);
+        ath5k_hw_tx_start(ah, sc->bhalq);
+        ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC, "TXDP[%u] = %llx (%p)\n",
+                sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
+
+        sc->bsent++;
+}
+
+
+static void
+ath5k_beacon_update_timers(struct ath5k_softc *sc)
+{
+        struct ath5k_hw *ah = sc->ah;
+        u32 uninitialized_var(nexttbtt), intval, tsftu;
+        u64 tsf;
+
+        intval = sc->bintval & AR5K_BEACON_PERIOD;
+        if (WARN_ON(!intval))
+                return;
+
+        /* current TSF converted to TU */
+        tsf = ath5k_hw_get_tsf64(ah);
+        tsftu = TSF_TO_TU(tsf);
+
+        /*
+         * Pull nexttbtt forward to reflect the current
+         * TSF. Add one intval otherwise the timespan
+         * can be too short for ibss merges.
+         */
+        nexttbtt = tsftu + 2 * intval;
+
+        ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
+                "hw tsftu %u nexttbtt %u intval %u\n", tsftu, nexttbtt, intval);
+
+        intval |= AR5K_BEACON_ENA;
+
+        ath5k_hw_init_beacon(ah, nexttbtt, intval);
+}
+
+
+/*
+ * Configure the beacon timers and interrupts based on the operating mode
+ *
+ * When operating in station mode we want to receive a BMISS interrupt when we
+ * stop seeing beacons from the AP we've associated with so we can look for
+ * another AP to associate with.
+ *
+ * In IBSS mode we need to configure the beacon timers and use a self-linked tx
+ * descriptor if possible. If the hardware cannot deal with that we enable SWBA
+ * interrupts to send the beacons from the interrupt handler.
+ */
+static void
+ath5k_beacon_config(struct ath5k_softc *sc)
+{
+        struct ath5k_hw *ah = sc->ah;
+
+        ath5k_hw_set_intr(ah, 0);
+        sc->bmisscount = 0;
+
+        if (sc->opmode == IEEE80211_IF_TYPE_STA) {
+                sc->imask |= AR5K_INT_BMISS;
+        } else if (sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+                /*
+                 * In IBSS mode enable the beacon timers but only enable SWBA
+                 * interrupts if we need to manually prepare beacon frames.
+                 * Otherwise we use a self-linked tx descriptor and let the
+                 * hardware deal with things. In that case we have to load it
+                 * only once here.
+                 */
+                ath5k_beaconq_config(sc);
+                ath5k_beacon_update_timers(sc);
+
+                if (!ath5k_hw_hasveol(ah))
+                        sc->imask |= AR5K_INT_SWBA;
+                else
+                        ath5k_beacon_send(sc);
+        }
+        /* TODO else AP */
+
+        ath5k_hw_set_intr(ah, sc->imask);
+}
+
+
+/********************\
+* Interrupt handling *
+\********************/
+
+static int
+ath5k_init(struct ath5k_softc *sc)
+{
+        int ret;
+
+        mutex_lock(&sc->lock);
+
+        ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode);
+
+        /*
+         * Stop anything previously setup.  This is safe
+         * no matter this is the first time through or not.
+         */
+        ath5k_stop_locked(sc);
+
+        /*
+         * The basic interface to setting the hardware in a good
+         * state is ``reset''.  On return the hardware is known to
+         * be powered up and with interrupts disabled.  This must
+         * be followed by initialization of the appropriate bits
+         * and then setup of the interrupt mask.
+         */
+        sc->curchan = sc->hw->conf.chan;
+        ret = ath5k_hw_reset(sc->ah, sc->opmode, sc->curchan, false);
+        if (ret) {
+                ATH5K_ERR(sc, "unable to reset hardware: %d\n", ret);
+                goto done;
+        }
+        /*
+         * This is needed only to setup initial state
+         * but it's best done after a reset.
+         */
+        ath5k_hw_set_txpower_limit(sc->ah, 0);
+
+        /*
+         * Setup the hardware after reset: the key cache
+         * is filled as needed and the receive engine is
+         * set going.  Frame transmit is handled entirely
+         * in the frame output path; there's nothing to do
+         * here except setup the interrupt mask.
+         */
+        ret = ath5k_rx_start(sc);
+        if (ret)
+                goto done;
+
+        /*
+         * Enable interrupts.
+         */
+        sc->imask = AR5K_INT_RX | AR5K_INT_TX | AR5K_INT_RXEOL |
+                AR5K_INT_RXORN | AR5K_INT_FATAL | AR5K_INT_GLOBAL;
+
+        ath5k_hw_set_intr(sc->ah, sc->imask);
+        /* Set ack to be sent at low bit-rates */
+        ath5k_hw_set_ack_bitrate_high(sc->ah, false);
+
+        mod_timer(&sc->calib_tim, round_jiffies(jiffies +
+                        msecs_to_jiffies(ath5k_calinterval * 1000)));
+
+        ret = 0;
+done:
+        mutex_unlock(&sc->lock);
+        return ret;
+}
+
+static int
+ath5k_stop_locked(struct ath5k_softc *sc)
+{
+        struct ath5k_hw *ah = sc->ah;
+
+        ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n",
+                        test_bit(ATH_STAT_INVALID, sc->status));
+
+        /*
+         * Shutdown the hardware and driver:
+         *    stop output from above
+         *    disable interrupts
+         *    turn off timers
+         *    turn off the radio
+         *    clear transmit machinery
+         *    clear receive machinery
+         *    drain and release tx queues
+         *    reclaim beacon resources
+         *    power down hardware
+         *
+         * Note that some of this work is not possible if the
+         * hardware is gone (invalid).
+         */
+        ieee80211_stop_queues(sc->hw);
+
+        if (!test_bit(ATH_STAT_INVALID, sc->status)) {
+                if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
+                        del_timer_sync(&sc->led_tim);
+                        ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on);
+                        __clear_bit(ATH_STAT_LEDBLINKING, sc->status);
+                }
+                ath5k_hw_set_intr(ah, 0);
+        }
+        ath5k_txq_cleanup(sc);
+        if (!test_bit(ATH_STAT_INVALID, sc->status)) {
+                ath5k_rx_stop(sc);
+                ath5k_hw_phy_disable(ah);
+        } else
+                sc->rxlink = NULL;
+
+        return 0;
+}
+
+/*
+ * Stop the device, grabbing the top-level lock to protect
+ * against concurrent entry through ath5k_init (which can happen
+ * if another thread does a system call and the thread doing the
+ * stop is preempted).
+ */
+static int
+ath5k_stop_hw(struct ath5k_softc *sc)
+{
+        int ret;
+
+        mutex_lock(&sc->lock);
+        ret = ath5k_stop_locked(sc);
+        if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
+                /*
+                 * Set the chip in full sleep mode.  Note that we are
+                 * careful to do this only when bringing the interface
+                 * completely to a stop.  When the chip is in this state
+                 * it must be carefully woken up or references to
+                 * registers in the PCI clock domain may freeze the bus
+                 * (and system).  This varies by chip and is mostly an
+                 * issue with newer parts that go to sleep more quickly.
+                 */
+                if (sc->ah->ah_mac_srev >= 0x78) {
+                        /*
+                         * XXX
+                         * don't put newer MAC revisions > 7.8 to sleep because
+                         * of the above mentioned problems
+                         */
+                        ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mac version > 7.8, "
+                                "not putting device to sleep\n");
+                } else {
+                        ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
+                                "putting device to full sleep\n");
+                        ath5k_hw_set_power(sc->ah, AR5K_PM_FULL_SLEEP, true, 0);
+                }
+        }
+        ath5k_txbuf_free(sc, sc->bbuf);
+        mutex_unlock(&sc->lock);
+
+        del_timer_sync(&sc->calib_tim);
+
+        return ret;
+}
+
+static irqreturn_t
+ath5k_intr(int irq, void *dev_id)
+{
+        struct ath5k_softc *sc = dev_id;
+        struct ath5k_hw *ah = sc->ah;
+        enum ath5k_int status;
+        unsigned int counter = 1000;
+
+        if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) ||
+                                !ath5k_hw_is_intr_pending(ah)))
+                return IRQ_NONE;
+
+        do {
+                /*
+                 * Figure out the reason(s) for the interrupt.  Note
+                 * that get_isr returns a pseudo-ISR that may include
+                 * bits we haven't explicitly enabled so we mask the
+                 * value to insure we only process bits we requested.
+                 */
+                ath5k_hw_get_isr(ah, &status);          /* NB: clears IRQ too */
+                ATH5K_DBG(sc, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n",
+                                status, sc->imask);
+                status &= sc->imask; /* discard unasked for bits */
+                if (unlikely(status & AR5K_INT_FATAL)) {
+                        /*
+                         * Fatal errors are unrecoverable.
+                         * Typically these are caused by DMA errors.
+                         */
+                        tasklet_schedule(&sc->restq);
+                } else if (unlikely(status & AR5K_INT_RXORN)) {
+                        tasklet_schedule(&sc->restq);
+                } else {
+                        if (status & AR5K_INT_SWBA) {
+                                /*
+                                * Software beacon alert--time to send a beacon.
+                                * Handle beacon transmission directly; deferring
+                                * this is too slow to meet timing constraints
+                                * under load.
+                                */
+                                ath5k_beacon_send(sc);
+                        }
+                        if (status & AR5K_INT_RXEOL) {
+                                /*
+                                * NB: the hardware should re-read the link when
+                                *     RXE bit is written, but it doesn't work at
+                                *     least on older hardware revs.
+                                */
+                                sc->rxlink = NULL;
+                        }
+                        if (status & AR5K_INT_TXURN) {
+                                /* bump tx trigger level */
+                                ath5k_hw_update_tx_triglevel(ah, true);
+                        }
+                        if (status & AR5K_INT_RX)
+                                tasklet_schedule(&sc->rxtq);
+                        if (status & AR5K_INT_TX)
+                                tasklet_schedule(&sc->txtq);
+                        if (status & AR5K_INT_BMISS) {
+                        }
+                        if (status & AR5K_INT_MIB) {
+                                /* TODO */
+                        }
+                }
+        } while (ath5k_hw_is_intr_pending(ah) && counter-- > 0);
+
+        if (unlikely(!counter))
+                ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
+
+        return IRQ_HANDLED;
+}
+
+static void
+ath5k_tasklet_reset(unsigned long data)
+{
+        struct ath5k_softc *sc = (void *)data;
+
+        ath5k_reset(sc->hw);
+}
+
+/*
+ * Periodically recalibrate the PHY to account
+ * for temperature/environment changes.
+ */
+static void
+ath5k_calibrate(unsigned long data)
+{
+        struct ath5k_softc *sc = (void *)data;
+        struct ath5k_hw *ah = sc->ah;
+
+        ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
+                sc->curchan->chan, sc->curchan->val);
+
+        if (ath5k_hw_get_rf_gain(ah) == AR5K_RFGAIN_NEED_CHANGE) {
+                /*
+                 * Rfgain is out of bounds, reset the chip
+                 * to load new gain values.
+                 */
+                ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n");
+                ath5k_reset(sc->hw);
+        }
+        if (ath5k_hw_phy_calibrate(ah, sc->curchan))
+                ATH5K_ERR(sc, "calibration of channel %u failed\n",
+                                sc->curchan->chan);
+
+        mod_timer(&sc->calib_tim, round_jiffies(jiffies +
+                        msecs_to_jiffies(ath5k_calinterval * 1000)));
+}
+
+
+
+/***************\
+* LED functions *
+\***************/
+
+static void
+ath5k_led_off(unsigned long data)
+{
+        struct ath5k_softc *sc = (void *)data;
+
+        if (test_bit(ATH_STAT_LEDENDBLINK, sc->status))
+                __clear_bit(ATH_STAT_LEDBLINKING, sc->status);
+        else {
+                __set_bit(ATH_STAT_LEDENDBLINK, sc->status);
+                ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on);
+                mod_timer(&sc->led_tim, jiffies + sc->led_off);
+        }
+}
+
+/*
+ * Blink the LED according to the specified on/off times.
+ */
+static void
+ath5k_led_blink(struct ath5k_softc *sc, unsigned int on,
+                unsigned int off)
+{
+        ATH5K_DBG(sc, ATH5K_DEBUG_LED, "on %u off %u\n", on, off);
+        ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on);
+        __set_bit(ATH_STAT_LEDBLINKING, sc->status);
+        __clear_bit(ATH_STAT_LEDENDBLINK, sc->status);
+        sc->led_off = off;
+        mod_timer(&sc->led_tim, jiffies + on);
+}
+
+static void
+ath5k_led_event(struct ath5k_softc *sc, int event)
+{
+        if (likely(!test_bit(ATH_STAT_LEDSOFT, sc->status)))
+                return;
+        if (unlikely(test_bit(ATH_STAT_LEDBLINKING, sc->status)))
+                return; /* don't interrupt active blink */
+        switch (event) {
+        case ATH_LED_TX:
+                ath5k_led_blink(sc, sc->hwmap[sc->led_txrate].ledon,
+                        sc->hwmap[sc->led_txrate].ledoff);
+                break;
+        case ATH_LED_RX:
+                ath5k_led_blink(sc, sc->hwmap[sc->led_rxrate].ledon,
+                        sc->hwmap[sc->led_rxrate].ledoff);
+                break;
+        }
+}
+
+
+
+
+/********************\
+* Mac80211 functions *
+\********************/
+
+static int
+ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
+                        struct ieee80211_tx_control *ctl)
+{
+        struct ath5k_softc *sc = hw->priv;
+        struct ath5k_buf *bf;
+        unsigned long flags;
+        int hdrlen;
+        int pad;
+
+        ath5k_debug_dump_skb(sc, skb, "TX  ", 1);
+
+        if (sc->opmode == IEEE80211_IF_TYPE_MNTR)
+                ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n");
+
+        /*
+         * the hardware expects the header padded to 4 byte boundaries
+         * if this is not the case we add the padding after the header
+         */
+        hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+        if (hdrlen & 3) {
+                pad = hdrlen % 4;
+                if (skb_headroom(skb) < pad) {
+                        ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
+                                " headroom to pad %d\n", hdrlen, pad);
+                        return -1;
+                }
+                skb_push(skb, pad);
+                memmove(skb->data, skb->data+pad, hdrlen);
+        }
+
+        sc->led_txrate = ctl->tx_rate;
+
+        spin_lock_irqsave(&sc->txbuflock, flags);
+        if (list_empty(&sc->txbuf)) {
+                ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
+                spin_unlock_irqrestore(&sc->txbuflock, flags);
+                ieee80211_stop_queue(hw, ctl->queue);
+                return -1;
+        }
+        bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
+        list_del(&bf->list);
+        sc->txbuf_len--;
+        if (list_empty(&sc->txbuf))
+                ieee80211_stop_queues(hw);
+        spin_unlock_irqrestore(&sc->txbuflock, flags);
+
+        bf->skb = skb;
+
+        if (ath5k_txbuf_setup(sc, bf, ctl)) {
+                bf->skb = NULL;
+                spin_lock_irqsave(&sc->txbuflock, flags);
+                list_add_tail(&bf->list, &sc->txbuf);
+                sc->txbuf_len++;
+                spin_unlock_irqrestore(&sc->txbuflock, flags);
+                dev_kfree_skb_any(skb);
+                return 0;
+        }
+
+        return 0;
+}
+
+static int
+ath5k_reset(struct ieee80211_hw *hw)
+{
+        struct ath5k_softc *sc = hw->priv;
+        struct ath5k_hw *ah = sc->ah;
+        int ret;
+
+        ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
+        /*
+         * Convert to a hw channel description with the flags
+         * constrained to reflect the current operating mode.
+         */
+        sc->curchan = hw->conf.chan;
+
+        ath5k_hw_set_intr(ah, 0);
+        ath5k_txq_cleanup(sc);
+        ath5k_rx_stop(sc);
+
+        ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
+        if (unlikely(ret)) {
+                ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
+                goto err;
+        }
+        ath5k_hw_set_txpower_limit(sc->ah, 0);
+
+        ret = ath5k_rx_start(sc);
+        if (unlikely(ret)) {
+                ATH5K_ERR(sc, "can't start recv logic\n");
+                goto err;
+        }
+        /*
+         * We may be doing a reset in response to an ioctl
+         * that changes the channel so update any state that
+         * might change as a result.
+         *
+         * XXX needed?
+         */
+/*      ath5k_chan_change(sc, c); */
+        ath5k_beacon_config(sc);
+        /* intrs are started by ath5k_beacon_config */
+
+        ieee80211_wake_queues(hw);
+
+        return 0;
+err:
+        return ret;
+}
+
+static int ath5k_start(struct ieee80211_hw *hw)
+{
+        return ath5k_init(hw->priv);
+}
+
+static void ath5k_stop(struct ieee80211_hw *hw)
+{
+        ath5k_stop_hw(hw->priv);
+}
+
+static int ath5k_add_interface(struct ieee80211_hw *hw,
+                struct ieee80211_if_init_conf *conf)
+{
+        struct ath5k_softc *sc = hw->priv;
+        int ret;
+
+        mutex_lock(&sc->lock);
+        if (sc->iface_id) {
+                ret = 0;
+                goto end;
+        }
+
+        sc->iface_id = conf->if_id;
+
+        switch (conf->type) {
+        case IEEE80211_IF_TYPE_STA:
+        case IEEE80211_IF_TYPE_IBSS:
+        case IEEE80211_IF_TYPE_MNTR:
+                sc->opmode = conf->type;
+                break;
+        default:
+                ret = -EOPNOTSUPP;
+                goto end;
+        }
+        ret = 0;
+end:
+        mutex_unlock(&sc->lock);
+        return ret;
+}
+
+static void
+ath5k_remove_interface(struct ieee80211_hw *hw,
+                        struct ieee80211_if_init_conf *conf)
+{
+        struct ath5k_softc *sc = hw->priv;
+
+        mutex_lock(&sc->lock);
+        if (sc->iface_id != conf->if_id)
+                goto end;
+
+        sc->iface_id = 0;
+end:
+        mutex_unlock(&sc->lock);
+}
+
+static int
+ath5k_config(struct ieee80211_hw *hw,
+                        struct ieee80211_conf *conf)
+{
+        struct ath5k_softc *sc = hw->priv;
+
+        sc->bintval = conf->beacon_int * 1000 / 1024;
+        ath5k_setcurmode(sc, conf->phymode);
+
+        return ath5k_chan_set(sc, conf->chan);
+}
+
+static int
+ath5k_config_interface(struct ieee80211_hw *hw, int if_id,
+                        struct ieee80211_if_conf *conf)
+{
+        struct ath5k_softc *sc = hw->priv;
+        struct ath5k_hw *ah = sc->ah;
+        int ret;
+
+        /* Set to a reasonable value. Note that this will
+         * be set to mac80211's value at ath5k_config(). */
+        sc->bintval = 1000 * 1000 / 1024;
+        mutex_lock(&sc->lock);
+        if (sc->iface_id != if_id) {
+                ret = -EIO;
+                goto unlock;
+        }
+        if (conf->bssid) {
+                /* Cache for later use during resets */
+                memcpy(ah->ah_bssid, conf->bssid, ETH_ALEN);
+                /* XXX: assoc id is set to 0 for now, mac80211 doesn't have
+                 * a clean way of letting us retrieve this yet. */
+                ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+        }
+        mutex_unlock(&sc->lock);
+
+        return ath5k_reset(hw);
+unlock:
+        mutex_unlock(&sc->lock);
+        return ret;
+}
+
+#define SUPPORTED_FIF_FLAGS \
+        FIF_PROMISC_IN_BSS |  FIF_ALLMULTI | FIF_FCSFAIL | \
+        FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
+        FIF_BCN_PRBRESP_PROMISC
+/*
+ * o always accept unicast, broadcast, and multicast traffic
+ * o multicast traffic for all BSSIDs will be enabled if mac80211
+ *   says it should be
+ * o maintain current state of phy ofdm or phy cck error reception.
+ *   If the hardware detects any of these type of errors then
+ *   ath5k_hw_get_rx_filter() will pass to us the respective
+ *   hardware filters to be able to receive these type of frames.
+ * o probe request frames are accepted only when operating in
+ *   hostap, adhoc, or monitor modes
+ * o enable promiscuous mode according to the interface state
+ * o accept beacons:
+ *   - when operating in adhoc mode so the 802.11 layer creates
+ *     node table entries for peers,
+ *   - when operating in station mode for collecting rssi data when
+ *     the station is otherwise quiet, or
+ *   - when scanning
+ */
+static void ath5k_configure_filter(struct ieee80211_hw *hw,
+                unsigned int changed_flags,
+                unsigned int *new_flags,
+                int mc_count, struct dev_mc_list *mclist)
+{
+        struct ath5k_softc *sc = hw->priv;
+        struct ath5k_hw *ah = sc->ah;
+        u32 mfilt[2], val, rfilt;
+        u8 pos;
+        int i;
+
+        mfilt[0] = 0;
+        mfilt[1] = 0;
+
+        /* Only deal with supported flags */
+        changed_flags &= SUPPORTED_FIF_FLAGS;
+        *new_flags &= SUPPORTED_FIF_FLAGS;
+
+        /* If HW detects any phy or radar errors, leave those filters on.
+         * Also, always enable Unicast, Broadcasts and Multicast
+         * XXX: move unicast, bssid broadcasts and multicast to mac80211 */
+        rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) |
+                (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
+                AR5K_RX_FILTER_MCAST);
+
+        if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
+                if (*new_flags & FIF_PROMISC_IN_BSS) {
+                        rfilt |= AR5K_RX_FILTER_PROM;
+                        __set_bit(ATH_STAT_PROMISC, sc->status);
+                }
+                else
+                        __clear_bit(ATH_STAT_PROMISC, sc->status);
+        }
+
+        /* Note, AR5K_RX_FILTER_MCAST is already enabled */
+        if (*new_flags & FIF_ALLMULTI) {
+                mfilt[0] =  ~0;
+                mfilt[1] =  ~0;
+        } else {
+                for (i = 0; i < mc_count; i++) {
+                        if (!mclist)
+                                break;
+                        /* calculate XOR of eight 6-bit values */
+                        val = LE_READ_4(mclist->dmi_addr + 0);
+                        pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
+                        val = LE_READ_4(mclist->dmi_addr + 3);
+                        pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
+                        pos &= 0x3f;
+                        mfilt[pos / 32] |= (1 << (pos % 32));
+                        /* XXX: we might be able to just do this instead,
+                        * but not sure, needs testing, if we do use this we'd
+                        * neet to inform below to not reset the mcast */
+                        /* ath5k_hw_set_mcast_filterindex(ah,
+                         *      mclist->dmi_addr[5]); */
+                        mclist = mclist->next;
+                }
+        }
+
+        /* This is the best we can do */
+        if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))
+                rfilt |= AR5K_RX_FILTER_PHYERR;
+
+        /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
+        * and probes for any BSSID, this needs testing */
+        if (*new_flags & FIF_BCN_PRBRESP_PROMISC)
+                rfilt |= AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ;
+
+        /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
+         * set we should only pass on control frames for this
+         * station. This needs testing. I believe right now this
+         * enables *all* control frames, which is OK.. but
+         * but we should see if we can improve on granularity */
+        if (*new_flags & FIF_CONTROL)
+                rfilt |= AR5K_RX_FILTER_CONTROL;
+
+        /* Additional settings per mode -- this is per ath5k */
+
+        /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
+
+        if (sc->opmode == IEEE80211_IF_TYPE_MNTR)
+                rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
+                        AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
+        if (sc->opmode != IEEE80211_IF_TYPE_STA)
+                rfilt |= AR5K_RX_FILTER_PROBEREQ;
+        if (sc->opmode != IEEE80211_IF_TYPE_AP &&
+                test_bit(ATH_STAT_PROMISC, sc->status))
+                rfilt |= AR5K_RX_FILTER_PROM;
+        if (sc->opmode == IEEE80211_IF_TYPE_STA ||
+                sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+                rfilt |= AR5K_RX_FILTER_BEACON;
+        }
+
+        /* Set filters */
+        ath5k_hw_set_rx_filter(ah,rfilt);
+
+        /* Set multicast bits */
+        ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
+        /* Set the cached hw filter flags, this will alter actually
+         * be set in HW */
+        sc->filter_flags = rfilt;
+}
+
+static int
+ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+                const u8 *local_addr, const u8 *addr,
+                struct ieee80211_key_conf *key)
+{
+        struct ath5k_softc *sc = hw->priv;
+        int ret = 0;
+
+        switch(key->alg) {
+        case ALG_WEP:
+                break;
+        case ALG_TKIP:
+        case ALG_CCMP:
+                return -EOPNOTSUPP;
+        default:
+                WARN_ON(1);
+                return -EINVAL;
+        }
+
+        mutex_lock(&sc->lock);
+
+        switch (cmd) {
+        case SET_KEY:
+                ret = ath5k_hw_set_key(sc->ah, key->keyidx, key, addr);
+                if (ret) {
+                        ATH5K_ERR(sc, "can't set the key\n");
+                        goto unlock;
+                }
+                __set_bit(key->keyidx, sc->keymap);
+                key->hw_key_idx = key->keyidx;
+                break;
+        case DISABLE_KEY:
+                ath5k_hw_reset_key(sc->ah, key->keyidx);
+                __clear_bit(key->keyidx, sc->keymap);
+                break;
+        default:
+                ret = -EINVAL;
+                goto unlock;
+        }
+
+unlock:
+        mutex_unlock(&sc->lock);
+        return ret;
+}
+
+static int
+ath5k_get_stats(struct ieee80211_hw *hw,
+                struct ieee80211_low_level_stats *stats)
+{
+        struct ath5k_softc *sc = hw->priv;
+
+        memcpy(stats, &sc->ll_stats, sizeof(sc->ll_stats));
+
+        return 0;
+}
+
+static int
+ath5k_get_tx_stats(struct ieee80211_hw *hw,
+                struct ieee80211_tx_queue_stats *stats)
+{
+        struct ath5k_softc *sc = hw->priv;
+
+        memcpy(stats, &sc->tx_stats, sizeof(sc->tx_stats));
+
+        return 0;
+}
+
+static u64
+ath5k_get_tsf(struct ieee80211_hw *hw)
+{
+        struct ath5k_softc *sc = hw->priv;
+
+        return ath5k_hw_get_tsf64(sc->ah);
+}
+
+static void
+ath5k_reset_tsf(struct ieee80211_hw *hw)
+{
+        struct ath5k_softc *sc = hw->priv;
+
+        ath5k_hw_reset_tsf(sc->ah);
+}
+
+static int
+ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
+                        struct ieee80211_tx_control *ctl)
+{
+        struct ath5k_softc *sc = hw->priv;
+        int ret;
+
+        ath5k_debug_dump_skb(sc, skb, "BC  ", 1);
+
+        mutex_lock(&sc->lock);
+
+        if (sc->opmode != IEEE80211_IF_TYPE_IBSS) {
+                ret = -EIO;
+                goto end;
+        }
+
+        ath5k_txbuf_free(sc, sc->bbuf);
+        sc->bbuf->skb = skb;
+        ret = ath5k_beacon_setup(sc, sc->bbuf, ctl);
+        if (ret)
+                sc->bbuf->skb = NULL;
+        else
+                ath5k_beacon_config(sc);
+
+end:
+        mutex_unlock(&sc->lock);
+        return ret;
+}
+
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h
new file mode 100644
index 000000000000..927d67db3dc2
--- /dev/null
+++ b/drivers/net/wireless/ath5k/base.h
@@ -0,0 +1,178 @@
+/*-
+ * Copyright (c) 2002-2007 Sam Leffler, Errno Consulting
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ *    redistribution must be conditioned upon including a substantially
+ *    similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+/*
+ * Defintions for the Atheros Wireless LAN controller driver.
+ */
+#ifndef _DEV_ATH_ATHVAR_H
+#define _DEV_ATH_ATHVAR_H
+
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/wireless.h>
+#include <linux/if_ether.h>
+
+#include "ath5k.h"
+#include "debug.h"
+
+#define ATH_RXBUF       40              /* number of RX buffers */
+#define ATH_TXBUF       200             /* number of TX buffers */
+#define ATH_BCBUF       1               /* number of beacon buffers */
+
+struct ath5k_buf {
+        struct list_head        list;
+        unsigned int            flags;  /* tx descriptor flags */
+        struct ath5k_desc       *desc;  /* virtual addr of desc */
+        dma_addr_t              daddr;  /* physical addr of desc */
+        struct sk_buff          *skb;   /* skbuff for buf */
+        dma_addr_t              skbaddr;/* physical addr of skb data */
+        struct ieee80211_tx_control ctl;
+};
+
+/*
+ * Data transmit queue state.  One of these exists for each
+ * hardware transmit queue.  Packets sent to us from above
+ * are assigned to queues based on their priority.  Not all
+ * devices support a complete set of hardware transmit queues.
+ * For those devices the array sc_ac2q will map multiple
+ * priorities to fewer hardware queues (typically all to one
+ * hardware queue).
+ */
+struct ath5k_txq {
+        unsigned int            qnum;   /* hardware q number */
+        u32                     *link;  /* link ptr in last TX desc */
+        struct list_head        q;      /* transmit queue */
+        spinlock_t              lock;   /* lock on q and link */
+        bool                    setup;
+};
+
+#if CHAN_DEBUG
+#define ATH_CHAN_MAX    (26+26+26+200+200)
+#else
+#define ATH_CHAN_MAX    (14+14+14+252+20)       /* XXX what's the max? */
+#endif
+
+/* Software Carrier, keeps track of the driver state
+ * associated with an instance of a device */
+struct ath5k_softc {
+        struct pci_dev          *pdev;          /* for dma mapping */
+        void __iomem            *iobase;        /* address of the device */
+        struct mutex            lock;           /* dev-level lock */
+        struct ieee80211_tx_queue_stats tx_stats;
+        struct ieee80211_low_level_stats ll_stats;
+        struct ieee80211_hw     *hw;            /* IEEE 802.11 common */
+        struct ieee80211_hw_mode modes[NUM_DRIVER_MODES];
+        struct ieee80211_channel channels[ATH_CHAN_MAX];
+        struct ieee80211_rate   rates[AR5K_MAX_RATES * NUM_DRIVER_MODES];
+        enum ieee80211_if_types opmode;
+        struct ath5k_hw         *ah;            /* Atheros HW */
+
+#if ATH5K_DEBUG
+        struct ath5k_dbg_info   debug;          /* debug info */
+#endif
+
+        struct ath5k_buf        *bufptr;        /* allocated buffer ptr */
+        struct ath5k_desc       *desc;          /* TX/RX descriptors */
+        dma_addr_t              desc_daddr;     /* DMA (physical) address */
+        size_t                  desc_len;       /* size of TX/RX descriptors */
+        u16                     cachelsz;       /* cache line size */
+
+        DECLARE_BITMAP(status, 6);
+#define ATH_STAT_INVALID        0               /* disable hardware accesses */
+#define ATH_STAT_MRRETRY        1               /* multi-rate retry support */
+#define ATH_STAT_PROMISC        2
+#define ATH_STAT_LEDBLINKING    3               /* LED blink operation active */
+#define ATH_STAT_LEDENDBLINK    4               /* finish LED blink operation */
+#define ATH_STAT_LEDSOFT        5               /* enable LED gpio status */
+
+        unsigned int            filter_flags;   /* HW flags, AR5K_RX_FILTER_* */
+        unsigned int            curmode;        /* current phy mode */
+        struct ieee80211_channel *curchan;      /* current h/w channel */
+
+        int                     iface_id;       /* add/remove_interface id */
+
+        struct {
+                u8      rxflags;        /* radiotap rx flags */
+                u8      txflags;        /* radiotap tx flags */
+                u16     ledon;          /* softled on time */
+                u16     ledoff;         /* softled off time */
+        } hwmap[32];                            /* h/w rate ix mappings */
+
+        enum ath5k_int          imask;          /* interrupt mask copy */
+
+        DECLARE_BITMAP(keymap, AR5K_KEYCACHE_SIZE); /* key use bit map */
+
+        u8                      bssidmask[ETH_ALEN];
+
+        unsigned int            led_pin,        /* GPIO pin for driving LED */
+                                led_on,         /* pin setting for LED on */
+                                led_off;        /* off time for current blink */
+        struct timer_list       led_tim;        /* led off timer */
+        u8                      led_rxrate;     /* current rx rate for LED */
+        u8                      led_txrate;     /* current tx rate for LED */
+
+        struct tasklet_struct   restq;          /* reset tasklet */
+
+        unsigned int            rxbufsize;      /* rx size based on mtu */
+        struct list_head        rxbuf;          /* receive buffer */
+        spinlock_t              rxbuflock;
+        u32                     *rxlink;        /* link ptr in last RX desc */
+        struct tasklet_struct   rxtq;           /* rx intr tasklet */
+
+        struct list_head        txbuf;          /* transmit buffer */
+        spinlock_t              txbuflock;
+        unsigned int            txbuf_len;      /* buf count in txbuf list */
+        struct ath5k_txq        txqs[2];        /* beacon and tx */
+
+        struct ath5k_txq        *txq;           /* beacon and tx*/
+        struct tasklet_struct   txtq;           /* tx intr tasklet */
+
+        struct ath5k_buf        *bbuf;          /* beacon buffer */
+        unsigned int            bhalq,          /* SW q for outgoing beacons */
+                                bmisscount,     /* missed beacon transmits */
+                                bintval,        /* beacon interval */
+                                bsent;
+
+        struct timer_list       calib_tim;      /* calibration timer */
+};
+
+#define ath5k_hw_hasbssidmask(_ah) \
+        (ath5k_hw_get_capability(_ah, AR5K_CAP_BSSIDMASK, 0, NULL) == 0)
+#define ath5k_hw_hasveol(_ah) \
+        (ath5k_hw_get_capability(_ah, AR5K_CAP_VEOL, 0, NULL) == 0)
+
+#endif
diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c
new file mode 100644
index 000000000000..4ba649e20269
--- /dev/null
+++ b/drivers/net/wireless/ath5k/debug.c
@@ -0,0 +1,469 @@
+/*
+ * Copyright (c) 2007 Bruno Randolf <bruno@thinktube.com>
+ *
+ *  This file is free software: you may copy, redistribute and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation, either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  This file is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2006 Devicescape Software, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ *    redistribution must be conditioned upon including a substantially
+ *    similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include "debug.h"
+#include "base.h"
+
+static unsigned int ath5k_debug;
+module_param_named(debug, ath5k_debug, uint, 0);
+
+
+#if ATH5K_DEBUG
+
+#include <linux/seq_file.h>
+#include "reg.h"
+
+static struct dentry *ath5k_global_debugfs;
+
+static int ath5k_debugfs_open(struct inode *inode, struct file *file)
+{
+        file->private_data = inode->i_private;
+        return 0;
+}
+
+
+/* debugfs: registers */
+
+struct reg {
+        char *name;
+        int addr;
+};
+
+#define REG_STRUCT_INIT(r) { #r, r }
+
+/* just a few random registers, might want to add more */
+static struct reg regs[] = {
+        REG_STRUCT_INIT(AR5K_CR),
+        REG_STRUCT_INIT(AR5K_RXDP),
+        REG_STRUCT_INIT(AR5K_CFG),
+        REG_STRUCT_INIT(AR5K_IER),
+        REG_STRUCT_INIT(AR5K_BCR),
+        REG_STRUCT_INIT(AR5K_RTSD0),
+        REG_STRUCT_INIT(AR5K_RTSD1),
+        REG_STRUCT_INIT(AR5K_TXCFG),
+        REG_STRUCT_INIT(AR5K_RXCFG),
+        REG_STRUCT_INIT(AR5K_RXJLA),
+        REG_STRUCT_INIT(AR5K_MIBC),
+        REG_STRUCT_INIT(AR5K_TOPS),
+        REG_STRUCT_INIT(AR5K_RXNOFRM),
+        REG_STRUCT_INIT(AR5K_TXNOFRM),
+        REG_STRUCT_INIT(AR5K_RPGTO),
+        REG_STRUCT_INIT(AR5K_RFCNT),
+        REG_STRUCT_INIT(AR5K_MISC),
+        REG_STRUCT_INIT(AR5K_QCUDCU_CLKGT),
+        REG_STRUCT_INIT(AR5K_ISR),
+        REG_STRUCT_INIT(AR5K_PISR),
+        REG_STRUCT_INIT(AR5K_SISR0),
+        REG_STRUCT_INIT(AR5K_SISR1),
+        REG_STRUCT_INIT(AR5K_SISR2),
+        REG_STRUCT_INIT(AR5K_SISR3),
+        REG_STRUCT_INIT(AR5K_SISR4),
+        REG_STRUCT_INIT(AR5K_IMR),
+        REG_STRUCT_INIT(AR5K_PIMR),
+        REG_STRUCT_INIT(AR5K_SIMR0),
+        REG_STRUCT_INIT(AR5K_SIMR1),
+        REG_STRUCT_INIT(AR5K_SIMR2),
+        REG_STRUCT_INIT(AR5K_SIMR3),
+        REG_STRUCT_INIT(AR5K_SIMR4),
+        REG_STRUCT_INIT(AR5K_DCM_ADDR),
+        REG_STRUCT_INIT(AR5K_DCCFG),
+        REG_STRUCT_INIT(AR5K_CCFG),
+        REG_STRUCT_INIT(AR5K_CPC0),
+        REG_STRUCT_INIT(AR5K_CPC1),
+        REG_STRUCT_INIT(AR5K_CPC2),
+        REG_STRUCT_INIT(AR5K_CPC3),
+        REG_STRUCT_INIT(AR5K_CPCORN),
+        REG_STRUCT_INIT(AR5K_RESET_CTL),
+        REG_STRUCT_INIT(AR5K_SLEEP_CTL),
+        REG_STRUCT_INIT(AR5K_INTPEND),
+        REG_STRUCT_INIT(AR5K_SFR),
+        REG_STRUCT_INIT(AR5K_PCICFG),
+        REG_STRUCT_INIT(AR5K_GPIOCR),
+        REG_STRUCT_INIT(AR5K_GPIODO),
+        REG_STRUCT_INIT(AR5K_SREV),
+};
+
+static void *reg_start(struct seq_file *seq, loff_t *pos)
+{
+        return *pos < ARRAY_SIZE(regs) ? &regs[*pos] : NULL;
+}
+
+static void reg_stop(struct seq_file *seq, void *p)
+{
+        /* nothing to do */
+}
+
+static void *reg_next(struct seq_file *seq, void *p, loff_t *pos)
+{
+        ++*pos;
+        return *pos < ARRAY_SIZE(regs) ? &regs[*pos] : NULL;
+}
+
+static int reg_show(struct seq_file *seq, void *p)
+{
+        struct ath5k_softc *sc = seq->private;
+        struct reg *r = p;
+        seq_printf(seq, "%-25s0x%08x\n", r->name,
+                ath5k_hw_reg_read(sc->ah, r->addr));
+        return 0;
+}
+
+static struct seq_operations register_seq_ops = {
+        .start = reg_start,
+        .next  = reg_next,
+        .stop  = reg_stop,
+        .show  = reg_show
+};
+
+static int open_file_registers(struct inode *inode, struct file *file)
+{
+        struct seq_file *s;
+        int res;
+        res = seq_open(file, &register_seq_ops);
+        if (res == 0) {
+                s = file->private_data;
+                s->private = inode->i_private;
+        }
+        return res;
+}
+
+static const struct file_operations fops_registers = {
+        .open = open_file_registers,
+        .read    = seq_read,
+        .llseek  = seq_lseek,
+        .release = seq_release,
+        .owner = THIS_MODULE,
+};
+
+
+/* debugfs: TSF */
+
+static ssize_t read_file_tsf(struct file *file, char __user *user_buf,
+                                   size_t count, loff_t *ppos)
+{
+        struct ath5k_softc *sc = file->private_data;
+        char buf[100];
+        snprintf(buf, 100, "0x%016llx\n", ath5k_hw_get_tsf64(sc->ah));
+        return simple_read_from_buffer(user_buf, count, ppos, buf, 19);
+}
+
+static ssize_t write_file_tsf(struct file *file,
+                                 const char __user *userbuf,
+                                 size_t count, loff_t *ppos)
+{
+        struct ath5k_softc *sc = file->private_data;
+        if (strncmp(userbuf, "reset", 5) == 0) {
+                ath5k_hw_reset_tsf(sc->ah);
+                printk(KERN_INFO "debugfs reset TSF\n");
+        }
+        return count;
+}
+
+static const struct file_operations fops_tsf = {
+        .read = read_file_tsf,
+        .write = write_file_tsf,
+        .open = ath5k_debugfs_open,
+        .owner = THIS_MODULE,
+};
+
+
+/* debugfs: beacons */
+
+static ssize_t read_file_beacon(struct file *file, char __user *user_buf,
+                                   size_t count, loff_t *ppos)
+{
+        struct ath5k_softc *sc = file->private_data;
+        struct ath5k_hw *ah = sc->ah;
+        char buf[1000];
+        int len = 0;
+        unsigned int v;
+        u64 tsf;
+
+        v = ath5k_hw_reg_read(sc->ah, AR5K_BEACON);
+        len += snprintf(buf+len, sizeof(buf)-len,
+                "%-24s0x%08x\tintval: %d\tTIM: 0x%x\n",
+                "AR5K_BEACON", v, v & AR5K_BEACON_PERIOD,
+                (v & AR5K_BEACON_TIM) >> AR5K_BEACON_TIM_S);
+
+        len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\n",
+                "AR5K_LAST_TSTP", ath5k_hw_reg_read(sc->ah, AR5K_LAST_TSTP));
+
+        len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\n\n",
+                "AR5K_BEACON_CNT", ath5k_hw_reg_read(sc->ah, AR5K_BEACON_CNT));
+
+        v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER0);
+        len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n",
+                "AR5K_TIMER0 (TBTT)", v, v);
+
+        v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER1);
+        len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n",
+                "AR5K_TIMER1 (DMA)", v, v >> 3);
+
+        v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER2);
+        len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n",
+                "AR5K_TIMER2 (SWBA)", v, v >> 3);
+
+        v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER3);
+        len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n",
+                "AR5K_TIMER3 (ATIM)", v, v);
+
+        tsf = ath5k_hw_get_tsf64(sc->ah);
+        len += snprintf(buf+len, sizeof(buf)-len,
+                "TSF\t\t0x%016llx\tTU: %08x\n", tsf, TSF_TO_TU(tsf));
+
+        return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_beacon(struct file *file,
+                                 const char __user *userbuf,
+                                 size_t count, loff_t *ppos)
+{
+        struct ath5k_softc *sc = file->private_data;
+        struct ath5k_hw *ah = sc->ah;
+
+        if (strncmp(userbuf, "disable", 7) == 0) {
+                AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
+                printk(KERN_INFO "debugfs disable beacons\n");
+        } else if (strncmp(userbuf, "enable", 6) == 0) {
+                AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE);
+                printk(KERN_INFO "debugfs enable beacons\n");
+        }
+        return count;
+}
+
+static const struct file_operations fops_beacon = {
+        .read = read_file_beacon,
+        .write = write_file_beacon,
+        .open = ath5k_debugfs_open,
+        .owner = THIS_MODULE,
+};
+
+
+/* debugfs: reset */
+
+static ssize_t write_file_reset(struct file *file,
+                                 const char __user *userbuf,
+                                 size_t count, loff_t *ppos)
+{
+        struct ath5k_softc *sc = file->private_data;
+        tasklet_schedule(&sc->restq);
+        return count;
+}
+
+static const struct file_operations fops_reset = {
+        .write = write_file_reset,
+        .open = ath5k_debugfs_open,
+        .owner = THIS_MODULE,
+};
+
+
+/* init */
+
+void
+ath5k_debug_init(void)
+{
+        ath5k_global_debugfs = debugfs_create_dir("ath5k", NULL);
+}
+
+void
+ath5k_debug_init_device(struct ath5k_softc *sc)
+{
+        sc->debug.level = ath5k_debug;
+        sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy),
+                        ath5k_global_debugfs);
+        sc->debug.debugfs_debug = debugfs_create_u32("debug",
+                        0666, sc->debug.debugfs_phydir, &sc->debug.level);
+
+        sc->debug.debugfs_registers = debugfs_create_file("registers", 0444,
+                                sc->debug.debugfs_phydir,
+                                sc, &fops_registers);
+
+        sc->debug.debugfs_tsf = debugfs_create_file("tsf", 0666,
+                                sc->debug.debugfs_phydir,
+                                sc, &fops_tsf);
+
+        sc->debug.debugfs_beacon = debugfs_create_file("beacon", 0666,
+                                sc->debug.debugfs_phydir,
+                                sc, &fops_beacon);
+
+        sc->debug.debugfs_reset = debugfs_create_file("reset", 0222,
+                                sc->debug.debugfs_phydir,
+                                sc, &fops_reset);
+}
+
+void
+ath5k_debug_finish(void)
+{
+        debugfs_remove(ath5k_global_debugfs);
+}
+
+void
+ath5k_debug_finish_device(struct ath5k_softc *sc)
+{
+        debugfs_remove(sc->debug.debugfs_debug);
+        debugfs_remove(sc->debug.debugfs_registers);
+        debugfs_remove(sc->debug.debugfs_tsf);
+        debugfs_remove(sc->debug.debugfs_beacon);
+        debugfs_remove(sc->debug.debugfs_reset);
+        debugfs_remove(sc->debug.debugfs_phydir);
+}
+
+
+/* functions used in other places */
+
+void
+ath5k_debug_dump_modes(struct ath5k_softc *sc, struct ieee80211_hw_mode *modes)
+{
+        unsigned int m, i;
+
+        if (likely(!(sc->debug.level & ATH5K_DEBUG_DUMPMODES)))
+                return;
+
+        for (m = 0; m < NUM_DRIVER_MODES; m++) {
+                printk(KERN_DEBUG "Mode %u: channels %d, rates %d\n", m,
+                                modes[m].num_channels, modes[m].num_rates);
+                printk(KERN_DEBUG " channels:\n");
+                for (i = 0; i < modes[m].num_channels; i++)
+                        printk(KERN_DEBUG "  %3d %d %.4x %.4x\n",
+                                        modes[m].channels[i].chan,
+                                        modes[m].channels[i].freq,
+                                        modes[m].channels[i].val,
+                                        modes[m].channels[i].flag);
+                printk(KERN_DEBUG " rates:\n");
+                for (i = 0; i < modes[m].num_rates; i++)
+                        printk(KERN_DEBUG "  %4d %.4x %.4x %.4x\n",
+                                        modes[m].rates[i].rate,
+                                        modes[m].rates[i].val,
+                                        modes[m].rates[i].flags,
+                                        modes[m].rates[i].val2);
+        }
+}
+
+static inline void
+ath5k_debug_printrxbuf(struct ath5k_buf *bf, int done)
+{
+        struct ath5k_desc *ds = bf->desc;
+
+        printk(KERN_DEBUG "R (%p %llx) %08x %08x %08x %08x %08x %08x %c\n",
+                ds, (unsigned long long)bf->daddr,
+                ds->ds_link, ds->ds_data, ds->ds_ctl0, ds->ds_ctl1,
+                ds->ds_hw[0], ds->ds_hw[1],
+                !done ? ' ' : (ds->ds_rxstat.rs_status == 0) ? '*' : '!');
+}
+
+void
+ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah)
+{
+        struct ath5k_desc *ds;
+        struct ath5k_buf *bf;
+        int status;
+
+        if (likely(!(sc->debug.level &
+            (ATH5K_DEBUG_RESET | ATH5K_DEBUG_FATAL))))
+                return;
+
+        printk(KERN_DEBUG "rx queue %x, link %p\n",
+                ath5k_hw_get_rx_buf(ah), sc->rxlink);
+
+        spin_lock_bh(&sc->rxbuflock);
+        list_for_each_entry(bf, &sc->rxbuf, list) {
+                ds = bf->desc;
+                status = ah->ah_proc_rx_desc(ah, ds);
+                if (!status || (sc->debug.level & ATH5K_DEBUG_FATAL))
+                        ath5k_debug_printrxbuf(bf, status == 0);
+        }
+        spin_unlock_bh(&sc->rxbuflock);
+}
+
+void
+ath5k_debug_dump_skb(struct ath5k_softc *sc,
+                        struct sk_buff *skb, const char *prefix, int tx)
+{
+        char buf[16];
+
+        if (likely(!((tx && (sc->debug.level & ATH5K_DEBUG_DUMP_TX)) ||
+                     (!tx && (sc->debug.level & ATH5K_DEBUG_DUMP_RX)))))
+                return;
+
+        snprintf(buf, sizeof(buf), "%s %s", wiphy_name(sc->hw->wiphy), prefix);
+
+        print_hex_dump_bytes(buf, DUMP_PREFIX_NONE, skb->data,
+                min(200U, skb->len));
+
+        printk(KERN_DEBUG "\n");
+}
+
+void
+ath5k_debug_printtxbuf(struct ath5k_softc *sc,
+                        struct ath5k_buf *bf, int done)
+{
+        struct ath5k_desc *ds = bf->desc;
+
+        if (likely(!(sc->debug.level & ATH5K_DEBUG_RESET)))
+                return;
+
+        printk(KERN_DEBUG "T (%p %llx) %08x %08x %08x %08x %08x %08x %08x "
+                "%08x %c\n", ds, (unsigned long long)bf->daddr, ds->ds_link,
+                ds->ds_data, ds->ds_ctl0, ds->ds_ctl1,
+                ds->ds_hw[0], ds->ds_hw[1], ds->ds_hw[2], ds->ds_hw[3],
+                !done ? ' ' : (ds->ds_txstat.ts_status == 0) ? '*' : '!');
+}
+
+#endif /* if ATH5K_DEBUG */
diff --git a/drivers/net/wireless/ath5k/debug.h b/drivers/net/wireless/ath5k/debug.h
new file mode 100644
index 000000000000..2b491cbc8c80
--- /dev/null
+++ b/drivers/net/wireless/ath5k/debug.h
@@ -0,0 +1,216 @@
+/*
+ * Copyright (c) 2007 Bruno Randolf <bruno@thinktube.com>
+ *
+ *  This file is free software: you may copy, redistribute and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation, either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  This file is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2006 Devicescape Software, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ *    redistribution must be conditioned upon including a substantially
+ *    similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef _ATH5K_DEBUG_H
+#define _ATH5K_DEBUG_H
+
+/* set this to 1 for debugging output */
+#ifndef ATH5K_DEBUG
+#define ATH5K_DEBUG     0
+#endif
+
+struct ath5k_softc;
+struct ath5k_hw;
+struct ieee80211_hw_mode;
+struct sk_buff;
+struct ath5k_buf;
+
+struct ath5k_dbg_info {
+        unsigned int            level;          /* debug level */
+        /* debugfs entries */
+        struct dentry           *debugfs_phydir;
+        struct dentry           *debugfs_debug;
+        struct dentry           *debugfs_registers;
+        struct dentry           *debugfs_tsf;
+        struct dentry           *debugfs_beacon;
+        struct dentry           *debugfs_reset;
+};
+
+/**
+ * enum ath5k_debug_level - ath5k debug level
+ *
+ * @ATH5K_DEBUG_RESET: reset processing
+ * @ATH5K_DEBUG_INTR: interrupt handling
+ * @ATH5K_DEBUG_MODE: mode init/setup
+ * @ATH5K_DEBUG_XMIT: basic xmit operation
+ * @ATH5K_DEBUG_BEACON: beacon handling
+ * @ATH5K_DEBUG_BEACON_PROC: beacon ISR proc
+ * @ATH5K_DEBUG_CALIBRATE: periodic calibration
+ * @ATH5K_DEBUG_TXPOWER: transmit power setting
+ * @ATH5K_DEBUG_LED: led management
+ * @ATH5K_DEBUG_DUMP_RX: print received skb content
+ * @ATH5K_DEBUG_DUMP_TX: print transmit skb content
+ * @ATH5K_DEBUG_DUMPMODES: dump modes
+ * @ATH5K_DEBUG_TRACE: trace function calls
+ * @ATH5K_DEBUG_FATAL: fatal errors
+ * @ATH5K_DEBUG_ANY: show at any debug level
+ *
+ * The debug level is used to control the amount and type of debugging output
+ * we want to see. The debug level is given in calls to ATH5K_DBG to specify
+ * where the message should appear, and the user can control the debugging
+ * messages he wants to see, either by the module parameter 'debug' on module
+ * load, or dynamically by using debugfs 'ath5k/phyX/debug'. these levels can
+ * be combined together by bitwise OR.
+ */
+enum ath5k_debug_level {
+        ATH5K_DEBUG_RESET       = 0x00000001,
+        ATH5K_DEBUG_INTR        = 0x00000002,
+        ATH5K_DEBUG_MODE        = 0x00000004,
+        ATH5K_DEBUG_XMIT        = 0x00000008,
+        ATH5K_DEBUG_BEACON      = 0x00000010,
+        ATH5K_DEBUG_BEACON_PROC = 0x00000020,
+        ATH5K_DEBUG_CALIBRATE   = 0x00000100,
+        ATH5K_DEBUG_TXPOWER     = 0x00000200,
+        ATH5K_DEBUG_LED         = 0x00000400,
+        ATH5K_DEBUG_DUMP_RX     = 0x00001000,
+        ATH5K_DEBUG_DUMP_TX     = 0x00002000,
+        ATH5K_DEBUG_DUMPMODES   = 0x00004000,
+        ATH5K_DEBUG_TRACE       = 0x00010000,
+        ATH5K_DEBUG_FATAL       = 0x80000000,
+        ATH5K_DEBUG_ANY         = 0xffffffff
+};
+
+#if ATH5K_DEBUG
+
+#define ATH5K_TRACE(_sc) do { \
+        if (unlikely((_sc)->debug.level & ATH5K_DEBUG_TRACE)) \
+                printk(KERN_DEBUG "ath5k trace %s:%d\n", __func__, __LINE__); \
+        } while (0)
+
+#define ATH5K_DBG(_sc, _m, _fmt, ...) do { \
+        if (unlikely((_sc)->debug.level & (_m) && net_ratelimit())) \
+                ATH5K_PRINTK(_sc, KERN_DEBUG, "(%s:%d): " _fmt, \
+                        __func__, __LINE__, ##__VA_ARGS__); \
+        } while (0)
+
+#define ATH5K_DBG_UNLIMIT(_sc, _m, _fmt, ...) do { \
+        if (unlikely((_sc)->debug.level & (_m))) \
+                ATH5K_PRINTK(_sc, KERN_DEBUG, "(%s:%d): " _fmt, \
+                        __func__, __LINE__, ##__VA_ARGS__); \
+        } while (0)
+
+void
+ath5k_debug_init(void);
+
+void
+ath5k_debug_init_device(struct ath5k_softc *sc);
+
+void
+ath5k_debug_finish(void);
+
+void
+ath5k_debug_finish_device(struct ath5k_softc *sc);
+
+void
+ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah);
+
+void
+ath5k_debug_dump_modes(struct ath5k_softc *sc,
+                        struct ieee80211_hw_mode *modes);
+
+void
+ath5k_debug_dump_skb(struct ath5k_softc *sc,
+                        struct sk_buff *skb, const char *prefix, int tx);
+
+void
+ath5k_debug_printtxbuf(struct ath5k_softc *sc,
+                        struct ath5k_buf *bf, int done);
+
+#else /* no debugging */
+
+#define ATH5K_TRACE(_sc) /* empty */
+
+static inline void __attribute__ ((format (printf, 3, 4)))
+ATH5K_DBG(struct ath5k_softc *sc, unsigned int m, const char *fmt, ...) {}
+
+static inline void __attribute__ ((format (printf, 3, 4)))
+ATH5K_DBG_UNLIMIT(struct ath5k_softc *sc, unsigned int m, const char *fmt, ...)
+{}
+
+static inline void
+ath5k_debug_init(void) {}
+
+static inline void
+ath5k_debug_init_device(struct ath5k_softc *sc) {}
+
+static inline void
+ath5k_debug_finish(void) {}
+
+static inline void
+ath5k_debug_finish_device(struct ath5k_softc *sc) {}
+
+static inline void
+ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah) {}
+
+static inline void
+ath5k_debug_dump_modes(struct ath5k_softc *sc,
+                        struct ieee80211_hw_mode *modes) {}
+
+static inline void
+ath5k_debug_dump_skb(struct ath5k_softc *sc,
+                        struct sk_buff *skb, const char *prefix, int tx) {}
+
+static inline void
+ath5k_debug_printtxbuf(struct ath5k_softc *sc,
+                        struct ath5k_buf *bf, int done) {}
+
+#endif /* if ATH5K_DEBUG */
+
+#endif /* ifndef _ATH5K_DEBUG_H */
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
new file mode 100644
index 000000000000..5623d7dc738e
--- /dev/null
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -0,0 +1,4349 @@
+ /*
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007 Matthew W. S. Bell  <mentor@madwifi.org>
+ * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2007 Pavel Roskin <proski@gnu.org>
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*
+ * HW related functions for Atheros Wireless LAN devices.
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "reg.h"
+#include "base.h"
+#include "debug.h"
+
+/*Rate tables*/
+static const struct ath5k_rate_table ath5k_rt_11a = AR5K_RATES_11A;
+static const struct ath5k_rate_table ath5k_rt_11b = AR5K_RATES_11B;
+static const struct ath5k_rate_table ath5k_rt_11g = AR5K_RATES_11G;
+static const struct ath5k_rate_table ath5k_rt_turbo = AR5K_RATES_TURBO;
+static const struct ath5k_rate_table ath5k_rt_xr = AR5K_RATES_XR;
+
+/*Prototypes*/
+static int ath5k_hw_nic_reset(struct ath5k_hw *, u32);
+static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool);
+static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
+        unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
+        unsigned int, unsigned int, unsigned int, unsigned int, unsigned int,
+        unsigned int, unsigned int);
+static bool ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
+        unsigned int, unsigned int, unsigned int, unsigned int, unsigned int,
+        unsigned int);
+static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *, struct ath5k_desc *);
+static int ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
+        unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
+        unsigned int, unsigned int, unsigned int, unsigned int, unsigned int,
+        unsigned int, unsigned int);
+static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *, struct ath5k_desc *);
+static int ath5k_hw_proc_new_rx_status(struct ath5k_hw *, struct ath5k_desc *);
+static int ath5k_hw_proc_old_rx_status(struct ath5k_hw *, struct ath5k_desc *);
+static int ath5k_hw_get_capabilities(struct ath5k_hw *);
+
+static int ath5k_eeprom_init(struct ath5k_hw *);
+static int ath5k_eeprom_read_mac(struct ath5k_hw *, u8 *);
+
+static int ath5k_hw_enable_pspoll(struct ath5k_hw *, u8 *, u16);
+static int ath5k_hw_disable_pspoll(struct ath5k_hw *);
+
+/*
+ * Enable to overwrite the country code (use "00" for debug)
+ */
+#if 0
+#define COUNTRYCODE "00"
+#endif
+
+/*******************\
+  General Functions
+\*******************/
+
+/*
+ * Functions used internaly
+ */
+
+static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
+{
+        return turbo == true ? (usec * 80) : (usec * 40);
+}
+
+static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
+{
+        return turbo == true ? (clock / 80) : (clock / 40);
+}
+
+/*
+ * Check if a register write has been completed
+ */
+int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val,
+                bool is_set)
+{
+        int i;
+        u32 data;
+
+        for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) {
+                data = ath5k_hw_reg_read(ah, reg);
+                if ((is_set == true) && (data & flag))
+                        break;
+                else if ((data & flag) == val)
+                        break;
+                udelay(15);
+        }
+
+        return (i <= 0) ? -EAGAIN : 0;
+}
+
+
+/***************************************\
+        Attach/Detach Functions
+\***************************************/
+
+/*
+ * Check if the device is supported and initialize the needed structs
+ */
+struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
+{
+        struct ath5k_hw *ah;
+        u8 mac[ETH_ALEN];
+        int ret;
+        u32 srev;
+
+        /*If we passed the test malloc a ath5k_hw struct*/
+        ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
+        if (ah == NULL) {
+                ret = -ENOMEM;
+                ATH5K_ERR(sc, "out of memory\n");
+                goto err;
+        }
+
+        ah->ah_sc = sc;
+        ah->ah_iobase = sc->iobase;
+
+        /*
+         * HW information
+         */
+
+        /* Get reg domain from eeprom */
+        ath5k_get_regdomain(ah);
+
+        ah->ah_op_mode = IEEE80211_IF_TYPE_STA;
+        ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT;
+        ah->ah_turbo = false;
+        ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
+        ah->ah_imr = 0;
+        ah->ah_atim_window = 0;
+        ah->ah_aifs = AR5K_TUNE_AIFS;
+        ah->ah_cw_min = AR5K_TUNE_CWMIN;
+        ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY;
+        ah->ah_software_retry = false;
+        ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY;
+
+        /*
+         * Set the mac revision based on the pci id
+         */
+        ah->ah_version = mac_version;
+
+        /*Fill the ath5k_hw struct with the needed functions*/
+        if (ah->ah_version == AR5K_AR5212)
+                ah->ah_magic = AR5K_EEPROM_MAGIC_5212;
+        else if (ah->ah_version == AR5K_AR5211)
+                ah->ah_magic = AR5K_EEPROM_MAGIC_5211;
+
+        if (ah->ah_version == AR5K_AR5212) {
+                ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc;
+                ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc;
+                ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status;
+        } else {
+                ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc;
+                ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc;
+                ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status;
+        }
+
+        if (ah->ah_version == AR5K_AR5212)
+                ah->ah_proc_rx_desc = ath5k_hw_proc_new_rx_status;
+        else if (ah->ah_version <= AR5K_AR5211)
+                ah->ah_proc_rx_desc = ath5k_hw_proc_old_rx_status;
+
+        /* Bring device out of sleep and reset it's units */
+        ret = ath5k_hw_nic_wakeup(ah, AR5K_INIT_MODE, true);
+        if (ret)
+                goto err_free;
+
+        /* Get MAC, PHY and RADIO revisions */
+        srev = ath5k_hw_reg_read(ah, AR5K_SREV);
+        ah->ah_mac_srev = srev;
+        ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER);
+        ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV);
+        ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) &
+                        0xffffffff;
+        ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah,
+                        CHANNEL_5GHZ);
+
+        if (ah->ah_version == AR5K_AR5210)
+                ah->ah_radio_2ghz_revision = 0;
+        else
+                ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+                                CHANNEL_2GHZ);
+
+        /* Return on unsuported chips (unsupported eeprom etc) */
+        if(srev >= AR5K_SREV_VER_AR5416){
+                ATH5K_ERR(sc, "Device not yet supported.\n");
+                ret = -ENODEV;
+                goto err_free;
+        }
+
+        /* Identify single chip solutions */
+        if((srev <= AR5K_SREV_VER_AR5414) &&
+        (srev >= AR5K_SREV_VER_AR2424)) {
+                ah->ah_single_chip = true;
+        } else {
+                ah->ah_single_chip = false;
+        }
+
+        /* Single chip radio */
+        if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision)
+                ah->ah_radio_2ghz_revision = 0;
+
+        /* Identify the radio chip*/
+        if (ah->ah_version == AR5K_AR5210) {
+                ah->ah_radio = AR5K_RF5110;
+        } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) {
+                ah->ah_radio = AR5K_RF5111;
+        } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) {
+                ah->ah_radio = AR5K_RF5112;
+        } else {
+                ah->ah_radio = AR5K_RF5413;
+        }
+
+        ah->ah_phy = AR5K_PHY(0);
+
+        /*
+         * Get card capabilities, values, ...
+         */
+
+        ret = ath5k_eeprom_init(ah);
+        if (ret) {
+                ATH5K_ERR(sc, "unable to init EEPROM\n");
+                goto err_free;
+        }
+
+        /* Get misc capabilities */
+        ret = ath5k_hw_get_capabilities(ah);
+        if (ret) {
+                ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n",
+                        sc->pdev->device);
+                goto err_free;
+        }
+
+        /* Get MAC address */
+        ret = ath5k_eeprom_read_mac(ah, mac);
+        if (ret) {
+                ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
+                        sc->pdev->device);
+                goto err_free;
+        }
+
+        ath5k_hw_set_lladdr(ah, mac);
+        /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
+        memset(ah->ah_bssid, 0xff, ETH_ALEN);
+        ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+        ath5k_hw_set_opmode(ah);
+
+        ath5k_hw_set_rfgain_opt(ah);
+
+        return ah;
+err_free:
+        kfree(ah);
+err:
+        return ERR_PTR(ret);
+}
+
+/*
+ * Bring up MAC + PHY Chips
+ */
+static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
+{
+        u32 turbo, mode, clock;
+        int ret;
+
+        turbo = 0;
+        mode = 0;
+        clock = 0;
+
+        ATH5K_TRACE(ah->ah_sc);
+
+        /* Wakeup the device */
+        ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+        if (ret) {
+                ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
+                return ret;
+        }
+
+        if (ah->ah_version != AR5K_AR5210) {
+                /*
+                 * Get channel mode flags
+                 */
+
+                if (ah->ah_radio >= AR5K_RF5112) {
+                        mode = AR5K_PHY_MODE_RAD_RF5112;
+                        clock = AR5K_PHY_PLL_RF5112;
+                } else {
+                        mode = AR5K_PHY_MODE_RAD_RF5111;        /*Zero*/
+                        clock = AR5K_PHY_PLL_RF5111;            /*Zero*/
+                }
+
+                if (flags & CHANNEL_2GHZ) {
+                        mode |= AR5K_PHY_MODE_FREQ_2GHZ;
+                        clock |= AR5K_PHY_PLL_44MHZ;
+
+                        if (flags & CHANNEL_CCK) {
+                                mode |= AR5K_PHY_MODE_MOD_CCK;
+                        } else if (flags & CHANNEL_OFDM) {
+                                /* XXX Dynamic OFDM/CCK is not supported by the
+                                 * AR5211 so we set MOD_OFDM for plain g (no
+                                 * CCK headers) operation. We need to test
+                                 * this, 5211 might support ofdm-only g after
+                                 * all, there are also initial register values
+                                 * in the code for g mode (see initvals.c). */
+                                if (ah->ah_version == AR5K_AR5211)
+                                        mode |= AR5K_PHY_MODE_MOD_OFDM;
+                                else
+                                        mode |= AR5K_PHY_MODE_MOD_DYN;
+                        } else {
+                                ATH5K_ERR(ah->ah_sc,
+                                        "invalid radio modulation mode\n");
+                                return -EINVAL;
+                        }
+                } else if (flags & CHANNEL_5GHZ) {
+                        mode |= AR5K_PHY_MODE_FREQ_5GHZ;
+                        clock |= AR5K_PHY_PLL_40MHZ;
+
+                        if (flags & CHANNEL_OFDM)
+                                mode |= AR5K_PHY_MODE_MOD_OFDM;
+                        else {
+                                ATH5K_ERR(ah->ah_sc,
+                                        "invalid radio modulation mode\n");
+                                return -EINVAL;
+                        }
+                } else {
+                        ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n");
+                        return -EINVAL;
+                }
+
+                if (flags & CHANNEL_TURBO)
+                        turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
+        } else { /* Reset the device */
+
+                /* ...enable Atheros turbo mode if requested */
+                if (flags & CHANNEL_TURBO)
+                        ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
+                                        AR5K_PHY_TURBO);
+        }
+
+        /* ...reset chipset and PCI device */
+        if (ah->ah_single_chip == false && ath5k_hw_nic_reset(ah,
+                                AR5K_RESET_CTL_CHIP | AR5K_RESET_CTL_PCI)) {
+                ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip + PCI\n");
+                return -EIO;
+        }
+
+        if (ah->ah_version == AR5K_AR5210)
+                udelay(2300);
+
+        /* ...wakeup again!*/
+        ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+        if (ret) {
+                ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
+                return ret;
+        }
+
+        /* ...final warm reset */
+        if (ath5k_hw_nic_reset(ah, 0)) {
+                ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
+                return -EIO;
+        }
+
+        if (ah->ah_version != AR5K_AR5210) {
+                /* ...set the PHY operating mode */
+                ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
+                udelay(300);
+
+                ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
+                ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
+        }
+
+        return 0;
+}
+
+/*
+ * Get the rate table for a specific operation mode
+ */
+const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah,
+                unsigned int mode)
+{
+        ATH5K_TRACE(ah->ah_sc);
+
+        if (!test_bit(mode, ah->ah_capabilities.cap_mode))
+                return NULL;
+
+        /* Get rate tables */
+        switch (mode) {
+        case MODE_IEEE80211A:
+                return &ath5k_rt_11a;
+        case MODE_ATHEROS_TURBO:
+                return &ath5k_rt_turbo;
+        case MODE_IEEE80211B:
+                return &ath5k_rt_11b;
+        case MODE_IEEE80211G:
+                return &ath5k_rt_11g;
+        case MODE_ATHEROS_TURBOG:
+                return &ath5k_rt_xr;
+        }
+
+        return NULL;
+}
+
+/*
+ * Free the ath5k_hw struct
+ */
+void ath5k_hw_detach(struct ath5k_hw *ah)
+{
+        ATH5K_TRACE(ah->ah_sc);
+
+        if (ah->ah_rf_banks != NULL)
+                kfree(ah->ah_rf_banks);
+
+        /* assume interrupts are down */
+        kfree(ah);
+}
+
+/****************************\
+  Reset function and helpers
+\****************************/
+
+/**
+ * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
+ *
+ * @ah: the &struct ath5k_hw
+ * @channel: the currently set channel upon reset
+ *
+ * Write the OFDM timings for the AR5212 upon reset. This is a helper for
+ * ath5k_hw_reset(). This seems to tune the PLL a specified frequency
+ * depending on the bandwidth of the channel.
+ *
+ */
+static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
+        struct ieee80211_channel *channel)
+{
+        /* Get exponent and mantissa and set it */
+        u32 coef_scaled, coef_exp, coef_man,
+                ds_coef_exp, ds_coef_man, clock;
+
+        if (!(ah->ah_version == AR5K_AR5212) ||
+                !(channel->val & CHANNEL_OFDM))
+                BUG();
+
+        /* Seems there are two PLLs, one for baseband sampling and one
+         * for tuning. Tuning basebands are 40 MHz or 80MHz when in
+         * turbo. */
+        clock = channel->val & CHANNEL_TURBO ? 80 : 40;
+        coef_scaled = ((5 * (clock << 24)) / 2) /
+        channel->freq;
+
+        for (coef_exp = 31; coef_exp > 0; coef_exp--)
+                if ((coef_scaled >> coef_exp) & 0x1)
+                        break;
+
+        if (!coef_exp)
+                return -EINVAL;
+
+        coef_exp = 14 - (coef_exp - 24);
+        coef_man = coef_scaled +
+                (1 << (24 - coef_exp - 1));
+        ds_coef_man = coef_man >> (24 - coef_exp);
+        ds_coef_exp = coef_exp - 16;
+
+        AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+                AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
+        AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+                AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
+
+        return 0;
+}
+
+/**
+ * ath5k_hw_write_rate_duration - set rate duration during hw resets
+ *
+ * @ah: the &struct ath5k_hw
+ * @driver_mode: one of enum ieee80211_phymode or our one of our own
+ *     vendor modes
+ *
+ * Write the rate duration table for the current mode upon hw reset. This
+ * is a helper for ath5k_hw_reset(). It seems all this is doing is setting
+ * an ACK timeout for the hardware for the current mode for each rate. The
+ * rates which are capable of short preamble (802.11b rates 2Mbps, 5.5Mbps,
+ * and 11Mbps) have another register for the short preamble ACK timeout
+ * calculation.
+ *
+ */
+static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
+       unsigned int driver_mode)
+{
+        struct ath5k_softc *sc = ah->ah_sc;
+        const struct ath5k_rate_table *rt;
+        unsigned int i;
+
+        /* Get rate table for the current operating mode */
+        rt = ath5k_hw_get_rate_table(ah,
+                driver_mode);
+
+        /* Write rate duration table */
+        for (i = 0; i < rt->rate_count; i++) {
+                const struct ath5k_rate *rate, *control_rate;
+                u32 reg;
+                u16 tx_time;
+
+                rate = &rt->rates[i];
+                control_rate = &rt->rates[rate->control_rate];
+
+                /* Set ACK timeout */
+                reg = AR5K_RATE_DUR(rate->rate_code);
+
+                /* An ACK frame consists of 10 bytes. If you add the FCS,
+                 * which ieee80211_generic_frame_duration() adds,
+                 * its 14 bytes. Note we use the control rate and not the
+                 * actual rate for this rate. See mac80211 tx.c
+                 * ieee80211_duration() for a brief description of
+                 * what rate we should choose to TX ACKs. */
+                tx_time = ieee80211_generic_frame_duration(sc->hw,
+                        sc->iface_id, 10, control_rate->rate_kbps/100);
+
+                ath5k_hw_reg_write(ah, tx_time, reg);
+
+                if (!HAS_SHPREAMBLE(i))
+                        continue;
+
+                /*
+                 * We're not distinguishing short preamble here,
+                 * This is true, all we'll get is a longer value here
+                 * which is not necessarilly bad. We could use
+                 * export ieee80211_frame_duration() but that needs to be
+                 * fixed first to be properly used by mac802111 drivers:
+                 *
+                 *  - remove erp stuff and let the routine figure ofdm
+                 *    erp rates
+                 *  - remove passing argument ieee80211_local as
+                 *    drivers don't have access to it
+                 *  - move drivers using ieee80211_generic_frame_duration()
+                 *    to this
+                 */
+                ath5k_hw_reg_write(ah, tx_time,
+                        reg + (AR5K_SET_SHORT_PREAMBLE << 2));
+        }
+}
+
+/*
+ * Main reset function
+ */
+int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
+        struct ieee80211_channel *channel, bool change_channel)
+{
+        struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+        u32 data, s_seq, s_ant, s_led[3];
+        unsigned int i, mode, freq, ee_mode, ant[2], driver_mode = -1;
+        int ret;
+
+        ATH5K_TRACE(ah->ah_sc);
+
+        s_seq = 0;
+        s_ant = 0;
+        ee_mode = 0;
+        freq = 0;
+        mode = 0;
+
+        /*
+         * Save some registers before a reset
+         */
+        /*DCU/Antenna selection not available on 5210*/
+        if (ah->ah_version != AR5K_AR5210) {
+                if (change_channel == true) {
+                        /* Seq number for queue 0 -do this for all queues ? */
+                        s_seq = ath5k_hw_reg_read(ah,
+                                        AR5K_QUEUE_DFS_SEQNUM(0));
+                        /*Default antenna*/
+                        s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
+                }
+        }
+
+        /*GPIOs*/
+        s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE;
+        s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
+        s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+        if (change_channel == true && ah->ah_rf_banks != NULL)
+                ath5k_hw_get_rf_gain(ah);
+
+
+        /*Wakeup the device*/
+        ret = ath5k_hw_nic_wakeup(ah, channel->val, false);
+        if (ret)
+                return ret;
+
+        /*
+         * Initialize operating mode
+         */
+        ah->ah_op_mode = op_mode;
+
+        /*
+         * 5111/5112 Settings
+         * 5210 only comes with RF5110
+         */
+        if (ah->ah_version != AR5K_AR5210) {
+                if (ah->ah_radio != AR5K_RF5111 &&
+                        ah->ah_radio != AR5K_RF5112 &&
+                        ah->ah_radio != AR5K_RF5413) {
+                        ATH5K_ERR(ah->ah_sc,
+                                "invalid phy radio: %u\n", ah->ah_radio);
+                        return -EINVAL;
+                }
+
+                switch (channel->val & CHANNEL_MODES) {
+                case CHANNEL_A:
+                        mode = AR5K_INI_VAL_11A;
+                        freq = AR5K_INI_RFGAIN_5GHZ;
+                        ee_mode = AR5K_EEPROM_MODE_11A;
+                        driver_mode = MODE_IEEE80211A;
+                        break;
+                case CHANNEL_G:
+                        mode = AR5K_INI_VAL_11G;
+                        freq = AR5K_INI_RFGAIN_2GHZ;
+                        ee_mode = AR5K_EEPROM_MODE_11G;
+                        driver_mode = MODE_IEEE80211G;
+                        break;
+                case CHANNEL_B:
+                        mode = AR5K_INI_VAL_11B;
+                        freq = AR5K_INI_RFGAIN_2GHZ;
+                        ee_mode = AR5K_EEPROM_MODE_11B;
+                        driver_mode = MODE_IEEE80211B;
+                        break;
+                case CHANNEL_T:
+                        mode = AR5K_INI_VAL_11A_TURBO;
+                        freq = AR5K_INI_RFGAIN_5GHZ;
+                        ee_mode = AR5K_EEPROM_MODE_11A;
+                        driver_mode = MODE_ATHEROS_TURBO;
+                        break;
+                /*Is this ok on 5211 too ?*/
+                case CHANNEL_TG:
+                        mode = AR5K_INI_VAL_11G_TURBO;
+                        freq = AR5K_INI_RFGAIN_2GHZ;
+                        ee_mode = AR5K_EEPROM_MODE_11G;
+                        driver_mode = MODE_ATHEROS_TURBOG;
+                        break;
+                case CHANNEL_XR:
+                        if (ah->ah_version == AR5K_AR5211) {
+                                ATH5K_ERR(ah->ah_sc,
+                                        "XR mode not available on 5211");
+                                return -EINVAL;
+                        }
+                        mode = AR5K_INI_VAL_XR;
+                        freq = AR5K_INI_RFGAIN_5GHZ;
+                        ee_mode = AR5K_EEPROM_MODE_11A;
+                        driver_mode = MODE_IEEE80211A;
+                        break;
+                default:
+                        ATH5K_ERR(ah->ah_sc,
+                                "invalid channel: %d\n", channel->freq);
+                        return -EINVAL;
+                }
+
+                /* PHY access enable */
+                ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+
+        }
+
+        ret = ath5k_hw_write_initvals(ah, mode, change_channel);
+        if (ret)
+                return ret;
+
+        /*
+         * 5211/5212 Specific
+         */
+        if (ah->ah_version != AR5K_AR5210) {
+                /*
+                 * Write initial RF gain settings
+                 * This should work for both 5111/5112
+                 */
+                ret = ath5k_hw_rfgain(ah, freq);
+                if (ret)
+                        return ret;
+
+                mdelay(1);
+
+                /*
+                 * Write some more initial register settings
+                 */
+                if (ah->ah_version > AR5K_AR5211){ /* found on 5213+ */
+                        ath5k_hw_reg_write(ah, 0x0002a002, AR5K_PHY(11));
+
+                        if (channel->val == CHANNEL_G)
+                                ath5k_hw_reg_write(ah, 0x00f80d80, AR5K_PHY(83)); /* 0x00fc0ec0 */
+                        else
+                                ath5k_hw_reg_write(ah, 0x00000000, AR5K_PHY(83));
+
+                        ath5k_hw_reg_write(ah, 0x000001b5, 0xa228); /* 0x000009b5 */
+                        ath5k_hw_reg_write(ah, 0x000009b5, 0xa228);
+                        ath5k_hw_reg_write(ah, 0x0000000f, 0x8060);
+                        ath5k_hw_reg_write(ah, 0x00000000, 0xa254);
+                        ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL);
+                }
+
+                /* Fix for first revision of the RF5112 RF chipset */
+                if (ah->ah_radio >= AR5K_RF5112 &&
+                                ah->ah_radio_5ghz_revision <
+                                AR5K_SREV_RAD_5112A) {
+                        ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
+                                        AR5K_PHY_CCKTXCTL);
+                        if (channel->val & CHANNEL_5GHZ)
+                                data = 0xffb81020;
+                        else
+                                data = 0xffb80d20;
+                        ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
+                }
+
+                /*
+                 * Set TX power (FIXME)
+                 */
+                ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER);
+                if (ret)
+                        return ret;
+
+                /* Write rate duration table */
+                if (ah->ah_version == AR5K_AR5212)
+                        ath5k_hw_write_rate_duration(ah, driver_mode);
+
+                /*
+                 * Write RF registers
+                 * TODO:Does this work on 5211 (5111) ?
+                 */
+                ret = ath5k_hw_rfregs(ah, channel, mode);
+                if (ret)
+                        return ret;
+
+                /*
+                 * Configure additional registers
+                 */
+
+                /* Write OFDM timings on 5212*/
+                if (ah->ah_version == AR5K_AR5212 &&
+                        channel->val & CHANNEL_OFDM) {
+                        ret = ath5k_hw_write_ofdm_timings(ah, channel);
+                        if (ret)
+                                return ret;
+                }
+
+                /*Enable/disable 802.11b mode on 5111
+                (enable 2111 frequency converter + CCK)*/
+                if (ah->ah_radio == AR5K_RF5111) {
+                        if (driver_mode == MODE_IEEE80211B)
+                                AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
+                                    AR5K_TXCFG_B_MODE);
+                        else
+                                AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
+                                    AR5K_TXCFG_B_MODE);
+                }
+
+                /*
+                 * Set channel and calibrate the PHY
+                 */
+                ret = ath5k_hw_channel(ah, channel);
+                if (ret)
+                        return ret;
+
+                /* Set antenna mode */
+                AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x44),
+                        ah->ah_antenna[ee_mode][0], 0xfffffc06);
+
+                /*
+                 * In case a fixed antenna was set as default
+                 * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
+                 * registers.
+                 */
+                if (s_ant != 0){
+                        if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
+                                ant[0] = ant[1] = AR5K_ANT_FIXED_A;
+                        else    /* 2 - Aux */
+                                ant[0] = ant[1] = AR5K_ANT_FIXED_B;
+                } else {
+                        ant[0] = AR5K_ANT_FIXED_A;
+                        ant[1] = AR5K_ANT_FIXED_B;
+                }
+
+                ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
+                        AR5K_PHY_ANT_SWITCH_TABLE_0);
+                ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
+                        AR5K_PHY_ANT_SWITCH_TABLE_1);
+
+                /* Commit values from EEPROM */
+                if (ah->ah_radio == AR5K_RF5111)
+                        AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL,
+                            AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip);
+
+                ath5k_hw_reg_write(ah,
+                        AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
+                        AR5K_PHY(0x5a));
+
+                AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x11),
+                        (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80,
+                        0xffffc07f);
+                AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x12),
+                        (ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000,
+                        0xfffc0fff);
+                AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x14),
+                        (ee->ee_adc_desired_size[ee_mode] & 0x00ff) |
+                        ((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00),
+                        0xffff0000);
+
+                ath5k_hw_reg_write(ah,
+                        (ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
+                        (ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
+                        (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
+                        (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY(0x0d));
+
+                AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x0a),
+                        ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff);
+                AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x19),
+                        (ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff);
+                AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x49), 4, 0xffffff01);
+
+                AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+                    AR5K_PHY_IQ_CORR_ENABLE |
+                    (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
+                    ee->ee_q_cal[ee_mode]);
+
+                if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+                        AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
+                                AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
+                                ee->ee_margin_tx_rx[ee_mode]);
+
+        } else {
+                mdelay(1);
+                /* Disable phy and wait */
+                ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
+                mdelay(1);
+        }
+
+        /*
+         * Restore saved values
+         */
+        /*DCU/Antenna selection not available on 5210*/
+        if (ah->ah_version != AR5K_AR5210) {
+                ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0));
+                ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA);
+        }
+        AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
+        ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
+        ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
+
+        /*
+         * Misc
+         */
+        /* XXX: add ah->aid once mac80211 gives this to us */
+        ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+
+        ath5k_hw_set_opmode(ah);
+        /*PISR/SISR Not available on 5210*/
+        if (ah->ah_version != AR5K_AR5210) {
+                ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
+                /* If we later allow tuning for this, store into sc structure */
+                data = AR5K_TUNE_RSSI_THRES |
+                        AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S;
+                ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR);
+        }
+
+        /*
+         * Set Rx/Tx DMA Configuration
+         *(passing dma size not available on 5210)
+         */
+        if (ah->ah_version != AR5K_AR5210) {
+                AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, AR5K_TXCFG_SDMAMR,
+                                AR5K_DMASIZE_512B | AR5K_TXCFG_DMASIZE);
+                AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_SDMAMW,
+                                AR5K_DMASIZE_512B);
+        }
+
+        /*
+         * Enable the PHY and wait until completion
+         */
+        ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
+
+        /*
+         * 5111/5112 Specific
+         */
+        if (ah->ah_version != AR5K_AR5210) {
+                data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
+                        AR5K_PHY_RX_DELAY_M;
+                data = (channel->val & CHANNEL_CCK) ?
+                        ((data << 2) / 22) : (data / 10);
+
+                udelay(100 + data);
+        } else {
+                mdelay(1);
+        }
+
+        /*
+         * Enable calibration and wait until completion
+         */
+        AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+                                AR5K_PHY_AGCCTL_CAL);
+
+        if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+                        AR5K_PHY_AGCCTL_CAL, 0, false)) {
+                ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n",
+                        channel->freq);
+                return -EAGAIN;
+        }
+
+        ret = ath5k_hw_noise_floor_calibration(ah, channel->freq);
+        if (ret)
+                return ret;
+
+        ah->ah_calibration = false;
+
+        /* A and G modes can use QAM modulation which requires enabling
+         * I and Q calibration. Don't bother in B mode. */
+        if (!(driver_mode == MODE_IEEE80211B)) {
+                ah->ah_calibration = true;
+                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+                                AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+                AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+                                AR5K_PHY_IQ_RUN);
+        }
+
+        /*
+         * Reset queues and start beacon timers at the end of the reset routine
+         */
+        for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
+                /*No QCU on 5210*/
+                if (ah->ah_version != AR5K_AR5210)
+                        AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i);
+
+                ret = ath5k_hw_reset_tx_queue(ah, i);
+                if (ret) {
+                        ATH5K_ERR(ah->ah_sc,
+                                "failed to reset TX queue #%d\n", i);
+                        return ret;
+                }
+        }
+
+        /* Pre-enable interrupts on 5211/5212*/
+        if (ah->ah_version != AR5K_AR5210)
+                ath5k_hw_set_intr(ah, AR5K_INT_RX | AR5K_INT_TX |
+                                AR5K_INT_FATAL);
+
+        /*
+         * Set RF kill flags if supported by the device (read from the EEPROM)
+         * Disable gpio_intr for now since it results system hang.
+         * TODO: Handle this in ath5k_intr
+         */
+#if 0
+        if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
+                ath5k_hw_set_gpio_input(ah, 0);
+                ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
+                if (ah->ah_gpio[0] == 0)
+                        ath5k_hw_set_gpio_intr(ah, 0, 1);
+                else
+                        ath5k_hw_set_gpio_intr(ah, 0, 0);
+        }
+#endif
+
+        /*
+         * Set the 32MHz reference clock on 5212 phy clock sleep register
+         */
+        if (ah->ah_version == AR5K_AR5212) {
+                ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR);
+                ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
+                ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL);
+                ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
+                ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
+                ath5k_hw_reg_write(ah, ah->ah_radio == AR5K_RF5111 ?
+                        AR5K_PHY_SPENDING_RF5111 : AR5K_PHY_SPENDING_RF5112,
+                        AR5K_PHY_SPENDING);
+        }
+
+        /*
+         * Disable beacons and reset the register
+         */
+        AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
+                        AR5K_BEACON_RESET_TSF);
+
+        return 0;
+}
+
+/*
+ * Reset chipset
+ */
+static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
+{
+        int ret;
+        u32 mask = val ? val : ~0U;
+
+        ATH5K_TRACE(ah->ah_sc);
+
+        /* Read-and-clear RX Descriptor Pointer*/
+        ath5k_hw_reg_read(ah, AR5K_RXDP);
+
+        /*
+         * Reset the device and wait until success
+         */
+        ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
+
+        /* Wait at least 128 PCI clocks */
+        udelay(15);
+
+        if (ah->ah_version == AR5K_AR5210) {
+                val &= AR5K_RESET_CTL_CHIP;
+                mask &= AR5K_RESET_CTL_CHIP;
+        } else {
+                val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+                mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+        }
+
+        ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false);
+
+        /*
+         * Reset configuration register (for hw byte-swap). Note that this
+         * is only set for big endian. We do the necessary magic in
+         * AR5K_INIT_CFG.
+         */
+        if ((val & AR5K_RESET_CTL_PCU) == 0)
+                ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
+
+        return ret;
+}
+
+/*
+ * Power management functions
+ */
+
+/*
+ * Sleep control
+ */
+int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
+                bool set_chip, u16 sleep_duration)
+{
+        unsigned int i;
+        u32 staid;
+
+        ATH5K_TRACE(ah->ah_sc);
+        staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
+
+        switch (mode) {
+        case AR5K_PM_AUTO:
+                staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA;
+                /* fallthrough */
+        case AR5K_PM_NETWORK_SLEEP:
+                if (set_chip == true)
+                        ath5k_hw_reg_write(ah,
+                                AR5K_SLEEP_CTL_SLE | sleep_duration,
+                                AR5K_SLEEP_CTL);
+
+                staid |= AR5K_STA_ID1_PWR_SV;
+                break;
+
+        case AR5K_PM_FULL_SLEEP:
+                if (set_chip == true)
+                        ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP,
+                                AR5K_SLEEP_CTL);
+
+                staid |= AR5K_STA_ID1_PWR_SV;
+                break;
+
+        case AR5K_PM_AWAKE:
+                if (set_chip == false)
+                        goto commit;
+
+                ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE,
+                                AR5K_SLEEP_CTL);
+
+                for (i = 5000; i > 0; i--) {
+                        /* Check if the chip did wake up */
+                        if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
+                                        AR5K_PCICFG_SPWR_DN) == 0)
+                                break;
+
+                        /* Wait a bit and retry */
+                        udelay(200);
+                        ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE,
+                                AR5K_SLEEP_CTL);
+                }
+
+                /* Fail if the chip didn't wake up */
+                if (i <= 0)
+                        return -EIO;
+
+                staid &= ~AR5K_STA_ID1_PWR_SV;
+                break;
+
+        default:
+                return -EINVAL;
+        }
+
+commit:
+        ah->ah_power_mode = mode;
+        ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
+
+        return 0;
+}
+
+/***********************\
+  DMA Related Functions
+\***********************/
+
+/*
+ * Receive functions
+ */
+
+/*
+ * Start DMA receive
+ */
+void ath5k_hw_start_rx(struct ath5k_hw *ah)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
+}
+
+/*
+ * Stop DMA receive
+ */
+int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
+{
+        unsigned int i;
+
+        ATH5K_TRACE(ah->ah_sc);
+        ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR);
+
+        /*
+         * It may take some time to disable the DMA receive unit
+         */
+        for (i = 2000; i > 0 &&
+                        (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0;
+                        i--)
+                udelay(10);
+
+        return i ? 0 : -EBUSY;
+}
+
+/*
+ * Get the address of the RX Descriptor
+ */
+u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah)
+{
+        return ath5k_hw_reg_read(ah, AR5K_RXDP);
+}
+
+/*
+ * Set the address of the RX Descriptor
+ */
+void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr)
+{
+        ATH5K_TRACE(ah->ah_sc);
+
+        /*TODO:Shouldn't we check if RX is enabled first ?*/
+        ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP);
+}
+
+/*
+ * Transmit functions
+ */
+
+/*
+ * Start DMA transmit for a specific queue
+ * (see also QCU/DCU functions)
+ */
+int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue)
+{
+        u32 tx_queue;
+
+        ATH5K_TRACE(ah->ah_sc);
+        AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+        /* Return if queue is declared inactive */
+        if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+                return -EIO;
+
+        if (ah->ah_version == AR5K_AR5210) {
+                tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
+
+                /*
+                 * Set the queue by type on 5210
+                 */
+                switch (ah->ah_txq[queue].tqi_type) {
+                case AR5K_TX_QUEUE_DATA:
+                        tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0;
+                        break;
+                case AR5K_TX_QUEUE_BEACON:
+                        tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
+                        ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
+                                        AR5K_BSR);
+                        break;
+                case AR5K_TX_QUEUE_CAB:
+                        tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
+                        ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V |
+                                AR5K_BCR_BDMAE, AR5K_BSR);
+                        break;
+                default:
+                        return -EINVAL;
+                }
+                /* Start queue */
+                ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+        } else {
+                /* Return if queue is disabled */
+                if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue))
+                        return -EIO;
+
+                /* Start queue */
+                AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue);
+        }
+
+        return 0;
+}
+
+/*
+ * Stop DMA transmit for a specific queue
+ * (see also QCU/DCU functions)
+ */
+int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+{
+        unsigned int i = 100;
+        u32 tx_queue, pending;
+
+        ATH5K_TRACE(ah->ah_sc);
+        AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+        /* Return if queue is declared inactive */
+        if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+                return -EIO;
+
+        if (ah->ah_version == AR5K_AR5210) {
+                tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
+
+                /*
+                 * Set by queue type
+                 */
+                switch (ah->ah_txq[queue].tqi_type) {
+                case AR5K_TX_QUEUE_DATA:
+                        tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0;
+                        break;
+                case AR5K_TX_QUEUE_BEACON:
+                case AR5K_TX_QUEUE_CAB:
+                        /* XXX Fix me... */
+                        tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1;
+                        ath5k_hw_reg_write(ah, 0, AR5K_BSR);
+                        break;
+                default:
+                        return -EINVAL;
+                }
+
+                /* Stop queue */
+                ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+        } else {
+                /*
+                 * Schedule TX disable and wait until queue is empty
+                 */
+                AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue);
+
+                /*Check for pending frames*/
+                do {
+                        pending = ath5k_hw_reg_read(ah,
+                                AR5K_QUEUE_STATUS(queue)) &
+                                AR5K_QCU_STS_FRMPENDCNT;
+                        udelay(100);
+                } while (--i && pending);
+
+                /* Clear register */
+                ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
+        }
+
+        /* TODO: Check for success else return error */
+        return 0;
+}
+
+/*
+ * Get the address of the TX Descriptor for a specific queue
+ * (see also QCU/DCU functions)
+ */
+u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue)
+{
+        u16 tx_reg;
+
+        ATH5K_TRACE(ah->ah_sc);
+        AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+        /*
+         * Get the transmit queue descriptor pointer from the selected queue
+         */
+        /*5210 doesn't have QCU*/
+        if (ah->ah_version == AR5K_AR5210) {
+                switch (ah->ah_txq[queue].tqi_type) {
+                case AR5K_TX_QUEUE_DATA:
+                        tx_reg = AR5K_NOQCU_TXDP0;
+                        break;
+                case AR5K_TX_QUEUE_BEACON:
+                case AR5K_TX_QUEUE_CAB:
+                        tx_reg = AR5K_NOQCU_TXDP1;
+                        break;
+                default:
+                        return 0xffffffff;
+                }
+        } else {
+                tx_reg = AR5K_QUEUE_TXDP(queue);
+        }
+
+        return ath5k_hw_reg_read(ah, tx_reg);
+}
+
+/*
+ * Set the address of the TX Descriptor for a specific queue
+ * (see also QCU/DCU functions)
+ */
+int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
+{
+        u16 tx_reg;
+
+        ATH5K_TRACE(ah->ah_sc);
+        AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+        /*
+         * Set the transmit queue descriptor pointer register by type
+         * on 5210
+         */
+        if (ah->ah_version == AR5K_AR5210) {
+                switch (ah->ah_txq[queue].tqi_type) {
+                case AR5K_TX_QUEUE_DATA:
+                        tx_reg = AR5K_NOQCU_TXDP0;
+                        break;
+                case AR5K_TX_QUEUE_BEACON:
+                case AR5K_TX_QUEUE_CAB:
+                        tx_reg = AR5K_NOQCU_TXDP1;
+                        break;
+                default:
+                        return -EINVAL;
+                }
+        } else {
+                /*
+                 * Set the transmit queue descriptor pointer for
+                 * the selected queue on QCU for 5211+
+                 * (this won't work if the queue is still active)
+                 */
+                if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
+                        return -EIO;
+
+                tx_reg = AR5K_QUEUE_TXDP(queue);
+        }
+
+        /* Set descriptor pointer */
+        ath5k_hw_reg_write(ah, phys_addr, tx_reg);
+
+        return 0;
+}
+
+/*
+ * Update tx trigger level
+ */
+int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
+{
+        u32 trigger_level, imr;
+        int ret = -EIO;
+
+        ATH5K_TRACE(ah->ah_sc);
+
+        /*
+         * Disable interrupts by setting the mask
+         */
+        imr = ath5k_hw_set_intr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL);
+
+        /*TODO: Boundary check on trigger_level*/
+        trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG),
+                        AR5K_TXCFG_TXFULL);
+
+        if (increase == false) {
+                if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES)
+                        goto done;
+        } else
+                trigger_level +=
+                        ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2);
+
+        /*
+         * Update trigger level on success
+         */
+        if (ah->ah_version == AR5K_AR5210)
+                ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL);
+        else
+                AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+                                AR5K_TXCFG_TXFULL, trigger_level);
+
+        ret = 0;
+
+done:
+        /*
+         * Restore interrupt mask
+         */
+        ath5k_hw_set_intr(ah, imr);
+
+        return ret;
+}
+
+/*
+ * Interrupt handling
+ */
+
+/*
+ * Check if we have pending interrupts
+ */
+bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        return ath5k_hw_reg_read(ah, AR5K_INTPEND);
+}
+
+/*
+ * Get interrupt mask (ISR)
+ */
+int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
+{
+        u32 data;
+
+        ATH5K_TRACE(ah->ah_sc);
+
+        /*
+         * Read interrupt status from the Interrupt Status register
+         * on 5210
+         */
+        if (ah->ah_version == AR5K_AR5210) {
+                data = ath5k_hw_reg_read(ah, AR5K_ISR);
+                if (unlikely(data == AR5K_INT_NOCARD)) {
+                        *interrupt_mask = data;
+                        return -ENODEV;
+                }
+        } else {
+                /*
+                 * Read interrupt status from the Read-And-Clear shadow register
+                 * Note: PISR/SISR Not available on 5210
+                 */
+                data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR);
+        }
+
+        /*
+         * Get abstract interrupt mask (driver-compatible)
+         */
+        *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr;
+
+        if (unlikely(data == AR5K_INT_NOCARD))
+                return -ENODEV;
+
+        if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR))
+                *interrupt_mask |= AR5K_INT_RX;
+
+        if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR
+                | AR5K_ISR_TXDESC | AR5K_ISR_TXEOL))
+                *interrupt_mask |= AR5K_INT_TX;
+
+        if (ah->ah_version != AR5K_AR5210) {
+                /*HIU = Host Interface Unit (PCI etc)*/
+                if (unlikely(data & (AR5K_ISR_HIUERR)))
+                        *interrupt_mask |= AR5K_INT_FATAL;
+
+                /*Beacon Not Ready*/
+                if (unlikely(data & (AR5K_ISR_BNR)))
+                        *interrupt_mask |= AR5K_INT_BNR;
+        }
+
+        /*
+         * XXX: BMISS interrupts may occur after association.
+         * I found this on 5210 code but it needs testing. If this is
+         * true we should disable them before assoc and re-enable them
+         * after a successfull assoc + some jiffies.
+         */
+#if 0
+        interrupt_mask &= ~AR5K_INT_BMISS;
+#endif
+
+        /*
+         * In case we didn't handle anything,
+         * print the register value.
+         */
+        if (unlikely(*interrupt_mask == 0 && net_ratelimit()))
+                ATH5K_PRINTF("0x%08x\n", data);
+
+        return 0;
+}
+
+/*
+ * Set interrupt mask
+ */
+enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask)
+{
+        enum ath5k_int old_mask, int_mask;
+
+        /*
+         * Disable card interrupts to prevent any race conditions
+         * (they will be re-enabled afterwards).
+         */
+        ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
+
+        old_mask = ah->ah_imr;
+
+        /*
+         * Add additional, chipset-dependent interrupt mask flags
+         * and write them to the IMR (interrupt mask register).
+         */
+        int_mask = new_mask & AR5K_INT_COMMON;
+
+        if (new_mask & AR5K_INT_RX)
+                int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN |
+                        AR5K_IMR_RXDESC;
+
+        if (new_mask & AR5K_INT_TX)
+                int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC |
+                        AR5K_IMR_TXURN;
+
+        if (ah->ah_version != AR5K_AR5210) {
+                if (new_mask & AR5K_INT_FATAL) {
+                        int_mask |= AR5K_IMR_HIUERR;
+                        AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT |
+                                        AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR);
+                }
+        }
+
+        ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR);
+
+        /* Store new interrupt mask */
+        ah->ah_imr = new_mask;
+
+        /* ..re-enable interrupts */
+        ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
+
+        return old_mask;
+}
+
+
+/*************************\
+  EEPROM access functions
+\*************************/
+
+/*
+ * Read from eeprom
+ */
+static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data)
+{
+        u32 status, timeout;
+
+        ATH5K_TRACE(ah->ah_sc);
+        /*
+         * Initialize EEPROM access
+         */
+        if (ah->ah_version == AR5K_AR5210) {
+                AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
+                (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
+        } else {
+                ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
+                AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
+                                AR5K_EEPROM_CMD_READ);
+        }
+
+        for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
+                status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
+                if (status & AR5K_EEPROM_STAT_RDDONE) {
+                        if (status & AR5K_EEPROM_STAT_RDERR)
+                                return -EIO;
+                        *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
+                                        0xffff);
+                        return 0;
+                }
+                udelay(15);
+        }
+
+        return -ETIMEDOUT;
+}
+
+/*
+ * Write to eeprom - currently disabled, use at your own risk
+ */
+static int ath5k_hw_eeprom_write(struct ath5k_hw *ah, u32 offset, u16 data)
+{
+#if 0
+        u32 status, timeout;
+
+        ATH5K_TRACE(ah->ah_sc);
+
+        /*
+         * Initialize eeprom access
+         */
+
+        if (ah->ah_version == AR5K_AR5210) {
+                AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
+        } else {
+                AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
+                                AR5K_EEPROM_CMD_RESET);
+        }
+
+        /*
+         * Write data to data register
+         */
+
+        if (ah->ah_version == AR5K_AR5210) {
+                ath5k_hw_reg_write(ah, data, AR5K_EEPROM_BASE + (4 * offset));
+        } else {
+                ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
+                ath5k_hw_reg_write(ah, data, AR5K_EEPROM_DATA);
+                AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
+                                AR5K_EEPROM_CMD_WRITE);
+        }
+
+        /*
+         * Check status
+         */
+
+        for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
+                status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
+                if (status & AR5K_EEPROM_STAT_WRDONE) {
+                        if (status & AR5K_EEPROM_STAT_WRERR)
+                                return EIO;
+                        return 0;
+                }
+                udelay(15);
+        }
+#endif
+        ATH5K_ERR(ah->ah_sc, "EEPROM Write is disabled!");
+        return -EIO;
+}
+
+/*
+ * Translate binary channel representation in EEPROM to frequency
+ */
+static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, unsigned int mode)
+{
+        u16 val;
+
+        if (bin == AR5K_EEPROM_CHANNEL_DIS)
+                return bin;
+
+        if (mode == AR5K_EEPROM_MODE_11A) {
+                if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2)
+                        val = (5 * bin) + 4800;
+                else
+                        val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 :
+                                (bin * 10) + 5100;
+        } else {
+                if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2)
+                        val = bin + 2300;
+                else
+                        val = bin + 2400;
+        }
+
+        return val;
+}
+
+/*
+ * Read antenna infos from eeprom
+ */
+static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset,
+                unsigned int mode)
+{
+        struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+        u32 o = *offset;
+        u16 val;
+        int ret, i = 0;
+
+        AR5K_EEPROM_READ(o++, val);
+        ee->ee_switch_settling[mode]    = (val >> 8) & 0x7f;
+        ee->ee_ant_tx_rx[mode]          = (val >> 2) & 0x3f;
+        ee->ee_ant_control[mode][i]     = (val << 4) & 0x3f;
+
+        AR5K_EEPROM_READ(o++, val);
+        ee->ee_ant_control[mode][i++]   |= (val >> 12) & 0xf;
+        ee->ee_ant_control[mode][i++]   = (val >> 6) & 0x3f;
+        ee->ee_ant_control[mode][i++]   = val & 0x3f;
+
+        AR5K_EEPROM_READ(o++, val);
+        ee->ee_ant_control[mode][i++]   = (val >> 10) & 0x3f;
+        ee->ee_ant_control[mode][i++]   = (val >> 4) & 0x3f;
+        ee->ee_ant_control[mode][i]     = (val << 2) & 0x3f;
+
+        AR5K_EEPROM_READ(o++, val);
+        ee->ee_ant_control[mode][i++]   |= (val >> 14) & 0x3;
+        ee->ee_ant_control[mode][i++]   = (val >> 8) & 0x3f;
+        ee->ee_ant_control[mode][i++]   = (val >> 2) & 0x3f;
+        ee->ee_ant_control[mode][i]     = (val << 4) & 0x3f;
+
+        AR5K_EEPROM_READ(o++, val);
+        ee->ee_ant_control[mode][i++]   |= (val >> 12) & 0xf;
+        ee->ee_ant_control[mode][i++]   = (val >> 6) & 0x3f;
+        ee->ee_ant_control[mode][i++]   = val & 0x3f;
+
+        /* Get antenna modes */
+        ah->ah_antenna[mode][0] =
+            (ee->ee_ant_control[mode][0] << 4) | 0x1;
+        ah->ah_antenna[mode][AR5K_ANT_FIXED_A] =
+             ee->ee_ant_control[mode][1]        |
+            (ee->ee_ant_control[mode][2] << 6)  |
+            (ee->ee_ant_control[mode][3] << 12) |
+            (ee->ee_ant_control[mode][4] << 18) |
+            (ee->ee_ant_control[mode][5] << 24);
+        ah->ah_antenna[mode][AR5K_ANT_FIXED_B] =
+             ee->ee_ant_control[mode][6]        |
+            (ee->ee_ant_control[mode][7] << 6)  |
+            (ee->ee_ant_control[mode][8] << 12) |
+            (ee->ee_ant_control[mode][9] << 18) |
+            (ee->ee_ant_control[mode][10] << 24);
+
+        /* return new offset */
+        *offset = o;
+
+        return 0;
+}
+
+/*
+ * Read supported modes from eeprom
+ */
+static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
+                unsigned int mode)
+{
+        struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+        u32 o = *offset;
+        u16 val;
+        int ret;
+
+        AR5K_EEPROM_READ(o++, val);
+        ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff;
+        ee->ee_thr_62[mode]             = val & 0xff;
+
+        if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
+                ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28;
+
+        AR5K_EEPROM_READ(o++, val);
+        ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff;
+        ee->ee_tx_frm2xpa_enable[mode]  = val & 0xff;
+
+        AR5K_EEPROM_READ(o++, val);
+        ee->ee_pga_desired_size[mode]   = (val >> 8) & 0xff;
+
+        if ((val & 0xff) & 0x80)
+                ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1);
+        else
+                ee->ee_noise_floor_thr[mode] = val & 0xff;
+
+        if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
+                ee->ee_noise_floor_thr[mode] =
+                    mode == AR5K_EEPROM_MODE_11A ? -54 : -1;
+
+        AR5K_EEPROM_READ(o++, val);
+        ee->ee_xlna_gain[mode]          = (val >> 5) & 0xff;
+        ee->ee_x_gain[mode]             = (val >> 1) & 0xf;
+        ee->ee_xpd[mode]                = val & 0x1;
+
+        if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0)
+                ee->ee_fixed_bias[mode] = (val >> 13) & 0x1;
+
+        if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) {
+                AR5K_EEPROM_READ(o++, val);
+                ee->ee_false_detect[mode] = (val >> 6) & 0x7f;
+
+                if (mode == AR5K_EEPROM_MODE_11A)
+                        ee->ee_xr_power[mode] = val & 0x3f;
+                else {
+                        ee->ee_ob[mode][0] = val & 0x7;
+                        ee->ee_db[mode][0] = (val >> 3) & 0x7;
+                }
+        }
+
+        if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) {
+                ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN;
+                ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA;
+        } else {
+                ee->ee_i_gain[mode] = (val >> 13) & 0x7;
+
+                AR5K_EEPROM_READ(o++, val);
+                ee->ee_i_gain[mode] |= (val << 3) & 0x38;
+
+                if (mode == AR5K_EEPROM_MODE_11G)
+                        ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff;
+        }
+
+        if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 &&
+                        mode == AR5K_EEPROM_MODE_11A) {
+                ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
+                ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+        }
+
+        if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 &&
+            mode == AR5K_EEPROM_MODE_11G)
+                ee->ee_scaled_cck_delta = (val >> 11) & 0x1f;
+
+        /* return new offset */
+        *offset = o;
+
+        return 0;
+}
+
+/*
+ * Initialize eeprom & capabilities structs
+ */
+static int ath5k_eeprom_init(struct ath5k_hw *ah)
+{
+        struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+        unsigned int mode, i;
+        int ret;
+        u32 offset;
+        u16 val;
+
+        /* Initial TX thermal adjustment values */
+        ee->ee_tx_clip = 4;
+        ee->ee_pwd_84 = ee->ee_pwd_90 = 1;
+        ee->ee_gain_select = 1;
+
+        /*
+         * Read values from EEPROM and store them in the capability structure
+         */
+        AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic);
+        AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect);
+        AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain);
+        AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version);
+        AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header);
+
+        /* Return if we have an old EEPROM */
+        if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0)
+                return 0;
+
+#ifdef notyet
+        /*
+         * Validate the checksum of the EEPROM date. There are some
+         * devices with invalid EEPROMs.
+         */
+        for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
+                AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
+                cksum ^= val;
+        }
+        if (cksum != AR5K_EEPROM_INFO_CKSUM) {
+                ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
+                return -EIO;
+        }
+#endif
+
+        AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version),
+            ee_ant_gain);
+
+        if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+                AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0);
+                AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1);
+        }
+
+        if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) {
+                AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val);
+                ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7;
+                ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7;
+
+                AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val);
+                ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7;
+                ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
+        }
+
+        /*
+         * Get conformance test limit values
+         */
+        offset = AR5K_EEPROM_CTL(ah->ah_ee_version);
+        ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version);
+
+        for (i = 0; i < ee->ee_ctls; i++) {
+                AR5K_EEPROM_READ(offset++, val);
+                ee->ee_ctl[i] = (val >> 8) & 0xff;
+                ee->ee_ctl[i + 1] = val & 0xff;
+        }
+
+        /*
+         * Get values for 802.11a (5GHz)
+         */
+        mode = AR5K_EEPROM_MODE_11A;
+
+        ee->ee_turbo_max_power[mode] =
+                        AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header);
+
+        offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version);
+
+        ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+        if (ret)
+                return ret;
+
+        AR5K_EEPROM_READ(offset++, val);
+        ee->ee_adc_desired_size[mode]   = (s8)((val >> 8) & 0xff);
+        ee->ee_ob[mode][3]              = (val >> 5) & 0x7;
+        ee->ee_db[mode][3]              = (val >> 2) & 0x7;
+        ee->ee_ob[mode][2]              = (val << 1) & 0x7;
+
+        AR5K_EEPROM_READ(offset++, val);
+        ee->ee_ob[mode][2]              |= (val >> 15) & 0x1;
+        ee->ee_db[mode][2]              = (val >> 12) & 0x7;
+        ee->ee_ob[mode][1]              = (val >> 9) & 0x7;
+        ee->ee_db[mode][1]              = (val >> 6) & 0x7;
+        ee->ee_ob[mode][0]              = (val >> 3) & 0x7;
+        ee->ee_db[mode][0]              = val & 0x7;
+
+        ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+        if (ret)
+                return ret;
+
+        if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) {
+                AR5K_EEPROM_READ(offset++, val);
+                ee->ee_margin_tx_rx[mode] = val & 0x3f;
+        }
+
+        /*
+         * Get values for 802.11b (2.4GHz)
+         */
+        mode = AR5K_EEPROM_MODE_11B;
+        offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version);
+
+        ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+        if (ret)
+                return ret;
+
+        AR5K_EEPROM_READ(offset++, val);
+        ee->ee_adc_desired_size[mode]   = (s8)((val >> 8) & 0xff);
+        ee->ee_ob[mode][1]              = (val >> 4) & 0x7;
+        ee->ee_db[mode][1]              = val & 0x7;
+
+        ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+        if (ret)
+                return ret;
+
+        if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+                AR5K_EEPROM_READ(offset++, val);
+                ee->ee_cal_pier[mode][0] =
+                        ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+                ee->ee_cal_pier[mode][1] =
+                        ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode);
+
+                AR5K_EEPROM_READ(offset++, val);
+                ee->ee_cal_pier[mode][2] =
+                        ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+        }
+
+        if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+                ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+
+        /*
+         * Get values for 802.11g (2.4GHz)
+         */
+        mode = AR5K_EEPROM_MODE_11G;
+        offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version);
+
+        ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+        if (ret)
+                return ret;
+
+        AR5K_EEPROM_READ(offset++, val);
+        ee->ee_adc_desired_size[mode]   = (s8)((val >> 8) & 0xff);
+        ee->ee_ob[mode][1]              = (val >> 4) & 0x7;
+        ee->ee_db[mode][1]              = val & 0x7;
+
+        ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+        if (ret)
+                return ret;
+
+        if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+                AR5K_EEPROM_READ(offset++, val);
+                ee->ee_cal_pier[mode][0] =
+                        ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+                ee->ee_cal_pier[mode][1] =
+                        ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode);
+
+                AR5K_EEPROM_READ(offset++, val);
+                ee->ee_turbo_max_power[mode] = val & 0x7f;
+                ee->ee_xr_power[mode] = (val >> 7) & 0x3f;
+
+                AR5K_EEPROM_READ(offset++, val);
+                ee->ee_cal_pier[mode][2] =
+                        ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+
+                if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+                        ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+
+                AR5K_EEPROM_READ(offset++, val);
+                ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
+                ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+
+                if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
+                        AR5K_EEPROM_READ(offset++, val);
+                        ee->ee_cck_ofdm_gain_delta = val & 0xff;
+                }
+        }
+
+        /*
+         * Read 5GHz EEPROM channels
+         */
+
+        return 0;
+}
+
+/*
+ * Read the MAC address from eeprom
+ */
+static int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
+{
+        u8 mac_d[ETH_ALEN];
+        u32 total, offset;
+        u16 data;
+        int octet, ret;
+
+        memset(mac, 0, ETH_ALEN);
+        memset(mac_d, 0, ETH_ALEN);
+
+        ret = ath5k_hw_eeprom_read(ah, 0x20, &data);
+        if (ret)
+                return ret;
+
+        for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
+                ret = ath5k_hw_eeprom_read(ah, offset, &data);
+                if (ret)
+                        return ret;
+
+                total += data;
+                mac_d[octet + 1] = data & 0xff;
+                mac_d[octet] = data >> 8;
+                octet += 2;
+        }
+
+        memcpy(mac, mac_d, ETH_ALEN);
+
+        if (!total || total == 3 * 0xffff)
+                return -EINVAL;
+
+        return 0;
+}
+
+/*
+ * Read/Write regulatory domain
+ */
+static bool ath5k_eeprom_regulation_domain(struct ath5k_hw *ah, bool write,
+        enum ath5k_regdom *regdomain)
+{
+        u16 ee_regdomain;
+
+        /* Read current value */
+        if (write != true) {
+                ee_regdomain = ah->ah_capabilities.cap_eeprom.ee_regdomain;
+                *regdomain = ath5k_regdom_to_ieee(ee_regdomain);
+                return true;
+        }
+
+        ee_regdomain = ath5k_regdom_from_ieee(*regdomain);
+
+        /* Try to write a new value */
+        if (ah->ah_capabilities.cap_eeprom.ee_protect &
+                        AR5K_EEPROM_PROTECT_WR_128_191)
+                return false;
+        if (ath5k_hw_eeprom_write(ah, AR5K_EEPROM_REG_DOMAIN, ee_regdomain)!=0)
+                return false;
+
+        ah->ah_capabilities.cap_eeprom.ee_regdomain = ee_regdomain;
+
+        return true;
+}
+
+/*
+ * Use the above to write a new regulatory domain
+ */
+int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain)
+{
+        enum ath5k_regdom ieee_regdomain;
+
+        ieee_regdomain = ath5k_regdom_to_ieee(regdomain);
+
+        if (ath5k_eeprom_regulation_domain(ah, true, &ieee_regdomain) == true)
+                return 0;
+
+        return -EIO;
+}
+
+/*
+ * Fill the capabilities struct
+ */
+static int ath5k_hw_get_capabilities(struct ath5k_hw *ah)
+{
+        u16 ee_header;
+
+        ATH5K_TRACE(ah->ah_sc);
+        /* Capabilities stored in the EEPROM */
+        ee_header = ah->ah_capabilities.cap_eeprom.ee_header;
+
+        if (ah->ah_version == AR5K_AR5210) {
+                /*
+                 * Set radio capabilities
+                 * (The AR5110 only supports the middle 5GHz band)
+                 */
+                ah->ah_capabilities.cap_range.range_5ghz_min = 5120;
+                ah->ah_capabilities.cap_range.range_5ghz_max = 5430;
+                ah->ah_capabilities.cap_range.range_2ghz_min = 0;
+                ah->ah_capabilities.cap_range.range_2ghz_max = 0;
+
+                /* Set supported modes */
+                __set_bit(MODE_IEEE80211A, ah->ah_capabilities.cap_mode);
+                __set_bit(MODE_ATHEROS_TURBO, ah->ah_capabilities.cap_mode);
+        } else {
+                /*
+                 * XXX The tranceiver supports frequencies from 4920 to 6100GHz
+                 * XXX and from 2312 to 2732GHz. There are problems with the
+                 * XXX current ieee80211 implementation because the IEEE
+                 * XXX channel mapping does not support negative channel
+                 * XXX numbers (2312MHz is channel -19). Of course, this
+                 * XXX doesn't matter because these channels are out of range
+                 * XXX but some regulation domains like MKK (Japan) will
+                 * XXX support frequencies somewhere around 4.8GHz.
+                 */
+
+                /*
+                 * Set radio capabilities
+                 */
+
+                if (AR5K_EEPROM_HDR_11A(ee_header)) {
+                        ah->ah_capabilities.cap_range.range_5ghz_min = 5005; /* 4920 */
+                        ah->ah_capabilities.cap_range.range_5ghz_max = 6100;
+
+                        /* Set supported modes */
+                        __set_bit(MODE_IEEE80211A,
+                                        ah->ah_capabilities.cap_mode);
+                        __set_bit(MODE_ATHEROS_TURBO,
+                                        ah->ah_capabilities.cap_mode);
+                        if (ah->ah_version == AR5K_AR5212)
+                                __set_bit(MODE_ATHEROS_TURBOG,
+                                                ah->ah_capabilities.cap_mode);
+                }
+
+                /* Enable  802.11b if a 2GHz capable radio (2111/5112) is
+                 * connected */
+                if (AR5K_EEPROM_HDR_11B(ee_header) ||
+                                AR5K_EEPROM_HDR_11G(ee_header)) {
+                        ah->ah_capabilities.cap_range.range_2ghz_min = 2412; /* 2312 */
+                        ah->ah_capabilities.cap_range.range_2ghz_max = 2732;
+
+                        if (AR5K_EEPROM_HDR_11B(ee_header))
+                                __set_bit(MODE_IEEE80211B,
+                                                ah->ah_capabilities.cap_mode);
+
+                        if (AR5K_EEPROM_HDR_11G(ee_header))
+                                __set_bit(MODE_IEEE80211G,
+                                                ah->ah_capabilities.cap_mode);
+                }
+        }
+
+        /* GPIO */
+        ah->ah_gpio_npins = AR5K_NUM_GPIO;
+
+        /* Set number of supported TX queues */
+        if (ah->ah_version == AR5K_AR5210)
+                ah->ah_capabilities.cap_queues.q_tx_num =
+                        AR5K_NUM_TX_QUEUES_NOQCU;
+        else
+                ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES;
+
+        return 0;
+}
+
+/*********************************\
+  Protocol Control Unit Functions
+\*********************************/
+
+/*
+ * Set Operation mode
+ */
+int ath5k_hw_set_opmode(struct ath5k_hw *ah)
+{
+        u32 pcu_reg, beacon_reg, low_id, high_id;
+
+        pcu_reg = 0;
+        beacon_reg = 0;
+
+        ATH5K_TRACE(ah->ah_sc);
+
+        switch (ah->ah_op_mode) {
+        case IEEE80211_IF_TYPE_IBSS:
+                pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA |
+                        (ah->ah_version == AR5K_AR5210 ?
+                                AR5K_STA_ID1_NO_PSPOLL : 0);
+                beacon_reg |= AR5K_BCR_ADHOC;
+                break;
+
+        case IEEE80211_IF_TYPE_AP:
+                pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA |
+                        (ah->ah_version == AR5K_AR5210 ?
+                                AR5K_STA_ID1_NO_PSPOLL : 0);
+                beacon_reg |= AR5K_BCR_AP;
+                break;
+
+        case IEEE80211_IF_TYPE_STA:
+                pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
+                        (ah->ah_version == AR5K_AR5210 ?
+                                AR5K_STA_ID1_PWR_SV : 0);
+        case IEEE80211_IF_TYPE_MNTR:
+                pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
+                        (ah->ah_version == AR5K_AR5210 ?
+                                AR5K_STA_ID1_NO_PSPOLL : 0);
+                break;
+
+        default:
+                return -EINVAL;
+        }
+
+        /*
+         * Set PCU registers
+         */
+        low_id = AR5K_LOW_ID(ah->ah_sta_id);
+        high_id = AR5K_HIGH_ID(ah->ah_sta_id);
+        ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+        ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
+
+        /*
+         * Set Beacon Control Register on 5210
+         */
+        if (ah->ah_version == AR5K_AR5210)
+                ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
+
+        return 0;
+}
+
+/*
+ * BSSID Functions
+ */
+
+/*
+ * Get station id
+ */
+void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        memcpy(mac, ah->ah_sta_id, ETH_ALEN);
+}
+
+/*
+ * Set station id
+ */
+int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
+{
+        u32 low_id, high_id;
+
+        ATH5K_TRACE(ah->ah_sc);
+        /* Set new station ID */
+        memcpy(ah->ah_sta_id, mac, ETH_ALEN);
+
+        low_id = AR5K_LOW_ID(mac);
+        high_id = AR5K_HIGH_ID(mac);
+
+        ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+        ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1);
+
+        return 0;
+}
+
+/*
+ * Set BSSID
+ */
+void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
+{
+        u32 low_id, high_id;
+        u16 tim_offset = 0;
+
+        /*
+         * Set simple BSSID mask on 5212
+         */
+        if (ah->ah_version == AR5K_AR5212) {
+                ath5k_hw_reg_write(ah, 0xfffffff, AR5K_BSS_IDM0);
+                ath5k_hw_reg_write(ah, 0xfffffff, AR5K_BSS_IDM1);
+        }
+
+        /*
+         * Set BSSID which triggers the "SME Join" operation
+         */
+        low_id = AR5K_LOW_ID(bssid);
+        high_id = AR5K_HIGH_ID(bssid);
+        ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0);
+        ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) <<
+                                AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1);
+
+        if (assoc_id == 0) {
+                ath5k_hw_disable_pspoll(ah);
+                return;
+        }
+
+        AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM,
+                        tim_offset ? tim_offset + 4 : 0);
+
+        ath5k_hw_enable_pspoll(ah, NULL, 0);
+}
+/**
+ * ath5k_hw_set_bssid_mask - set common bits we should listen to
+ *
+ * The bssid_mask is a utility used by AR5212 hardware to inform the hardware
+ * which bits of the interface's MAC address should be looked at when trying
+ * to decide which packets to ACK. In station mode every bit matters. In AP
+ * mode with a single BSS every bit matters as well. In AP mode with
+ * multiple BSSes not every bit matters.
+ *
+ * @ah: the &struct ath5k_hw
+ * @mask: the bssid_mask, a u8 array of size ETH_ALEN
+ *
+ * Note that this is a simple filter and *does* not filter out all
+ * relevant frames. Some non-relevant frames will get through, probability
+ * jocks are welcomed to compute.
+ *
+ * When handling multiple BSSes (or VAPs) you can get the BSSID mask by
+ * computing the set of:
+ *
+ *     ~ ( MAC XOR BSSID )
+ *
+ * When you do this you are essentially computing the common bits. Later it
+ * is assumed the harware will "and" (&) the BSSID mask with the MAC address
+ * to obtain the relevant bits which should match on the destination frame.
+ *
+ * Simple example: on your card you have have two BSSes you have created with
+ * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
+ * There is another BSSID-03 but you are not part of it. For simplicity's sake,
+ * assuming only 4 bits for a mac address and for BSSIDs you can then have:
+ *
+ *                  \
+ * MAC:                0001 |
+ * BSSID-01:   0100 | --> Belongs to us
+ * BSSID-02:   1001 |
+ *                  /
+ * -------------------
+ * BSSID-03:   0110  | --> External
+ * -------------------
+ *
+ * Our bssid_mask would then be:
+ *
+ *             On loop iteration for BSSID-01:
+ *             ~(0001 ^ 0100)  -> ~(0101)
+ *                             ->   1010
+ *             bssid_mask      =    1010
+ *
+ *             On loop iteration for BSSID-02:
+ *             bssid_mask &= ~(0001   ^   1001)
+ *             bssid_mask =   (1010)  & ~(0001 ^ 1001)
+ *             bssid_mask =   (1010)  & ~(1001)
+ *             bssid_mask =   (1010)  &  (0110)
+ *             bssid_mask =   0010
+ *
+ * A bssid_mask of 0010 means "only pay attention to the second least
+ * significant bit". This is because its the only bit common
+ * amongst the MAC and all BSSIDs we support. To findout what the real
+ * common bit is we can simply "&" the bssid_mask now with any BSSID we have
+ * or our MAC address (we assume the hardware uses the MAC address).
+ *
+ * Now, suppose there's an incoming frame for BSSID-03:
+ *
+ * IFRAME-01:  0110
+ *
+ * An easy eye-inspeciton of this already should tell you that this frame
+ * will not pass our check. This is beacuse the bssid_mask tells the
+ * hardware to only look at the second least significant bit and the
+ * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
+ * as 1, which does not match 0.
+ *
+ * So with IFRAME-01 we *assume* the hardware will do:
+ *
+ *     allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ *  --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
+ *  --> allow = (0010) == 0000 ? 1 : 0;
+ *  --> allow = 0
+ *
+ *  Lets now test a frame that should work:
+ *
+ * IFRAME-02:  0001 (we should allow)
+ *
+ *     allow = (0001 & 1010) == 1010
+ *
+ *     allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ *  --> allow = (0001 & 0010) ==  (0010 & 0001) ? 1 :0;
+ *  --> allow = (0010) == (0010)
+ *  --> allow = 1
+ *
+ * Other examples:
+ *
+ * IFRAME-03:  0100 --> allowed
+ * IFRAME-04:  1001 --> allowed
+ * IFRAME-05:  1101 --> allowed but its not for us!!!
+ *
+ */
+int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
+{
+        u32 low_id, high_id;
+        ATH5K_TRACE(ah->ah_sc);
+
+        if (ah->ah_version == AR5K_AR5212) {
+                low_id = AR5K_LOW_ID(mask);
+                high_id = AR5K_HIGH_ID(mask);
+
+                ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0);
+                ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1);
+
+                return 0;
+        }
+
+        return -EIO;
+}
+
+/*
+ * Receive start/stop functions
+ */
+
+/*
+ * Start receive on PCU
+ */
+void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/*
+ * Stop receive on PCU
+ */
+void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/*
+ * RX Filter functions
+ */
+
+/*
+ * Set multicast filter
+ */
+void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        /* Set the multicat filter */
+        ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0);
+        ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1);
+}
+
+/*
+ * Set multicast filter by index
+ */
+int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index)
+{
+
+        ATH5K_TRACE(ah->ah_sc);
+        if (index >= 64)
+                return -EINVAL;
+        else if (index >= 32)
+                AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1,
+                                (1 << (index - 32)));
+        else
+                AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
+
+        return 0;
+}
+
+/*
+ * Clear Multicast filter by index
+ */
+int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
+{
+
+        ATH5K_TRACE(ah->ah_sc);
+        if (index >= 64)
+                return -EINVAL;
+        else if (index >= 32)
+                AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1,
+                                (1 << (index - 32)));
+        else
+                AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
+
+        return 0;
+}
+
+/*
+ * Get current rx filter
+ */
+u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
+{
+        u32 data, filter = 0;
+
+        ATH5K_TRACE(ah->ah_sc);
+        filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER);
+
+        /*Radar detection for 5212*/
+        if (ah->ah_version == AR5K_AR5212) {
+                data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL);
+
+                if (data & AR5K_PHY_ERR_FIL_RADAR)
+                        filter |= AR5K_RX_FILTER_RADARERR;
+                if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK))
+                        filter |= AR5K_RX_FILTER_PHYERR;
+        }
+
+        return filter;
+}
+
+/*
+ * Set rx filter
+ */
+void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
+{
+        u32 data = 0;
+
+        ATH5K_TRACE(ah->ah_sc);
+
+        /* Set PHY error filter register on 5212*/
+        if (ah->ah_version == AR5K_AR5212) {
+                if (filter & AR5K_RX_FILTER_RADARERR)
+                        data |= AR5K_PHY_ERR_FIL_RADAR;
+                if (filter & AR5K_RX_FILTER_PHYERR)
+                        data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK;
+        }
+
+        /*
+         * The AR5210 uses promiscous mode to detect radar activity
+         */
+        if (ah->ah_version == AR5K_AR5210 &&
+                        (filter & AR5K_RX_FILTER_RADARERR)) {
+                filter &= ~AR5K_RX_FILTER_RADARERR;
+                filter |= AR5K_RX_FILTER_PROM;
+        }
+
+        /*Zero length DMA*/
+        if (data)
+                AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
+        else
+                AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
+
+        /*Write RX Filter register*/
+        ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER);
+
+        /*Write PHY error filter register on 5212*/
+        if (ah->ah_version == AR5K_AR5212)
+                ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL);
+
+}
+
+/*
+ * Beacon related functions
+ */
+
+/*
+ * Get a 32bit TSF
+ */
+u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        return ath5k_hw_reg_read(ah, AR5K_TSF_L32);
+}
+
+/*
+ * Get the full 64bit TSF
+ */
+u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
+{
+        u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
+        ATH5K_TRACE(ah->ah_sc);
+
+        return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32);
+}
+
+/*
+ * Force a TSF reset
+ */
+void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF);
+}
+
+/*
+ * Initialize beacon timers
+ */
+void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
+{
+        u32 timer1, timer2, timer3;
+
+        ATH5K_TRACE(ah->ah_sc);
+        /*
+         * Set the additional timers by mode
+         */
+        switch (ah->ah_op_mode) {
+        case IEEE80211_IF_TYPE_STA:
+                if (ah->ah_version == AR5K_AR5210) {
+                        timer1 = 0xffffffff;
+                        timer2 = 0xffffffff;
+                } else {
+                        timer1 = 0x0000ffff;
+                        timer2 = 0x0007ffff;
+                }
+                break;
+
+        default:
+                timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) <<
+                    0x00000003;
+                timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) <<
+                    0x00000003;
+        }
+
+        timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1);
+
+        /*
+         * Set the beacon register and enable all timers.
+         * (next beacon, DMA beacon, software beacon, ATIM window time)
+         */
+        ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
+        ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
+        ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
+        ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
+
+        ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD |
+                        AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE),
+                AR5K_BEACON);
+}
+
+#if 0
+/*
+ * Set beacon timers
+ */
+int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah,
+                const struct ath5k_beacon_state *state)
+{
+        u32 cfp_period, next_cfp, dtim, interval, next_beacon;
+
+        /*
+         * TODO: should be changed through *state
+         * review struct ath5k_beacon_state struct
+         *
+         * XXX: These are used for cfp period bellow, are they
+         * ok ? Is it O.K. for tsf here to be 0 or should we use
+         * get_tsf ?
+         */
+        u32 dtim_count = 0; /* XXX */
+        u32 cfp_count = 0; /* XXX */
+        u32 tsf = 0; /* XXX */
+
+        ATH5K_TRACE(ah->ah_sc);
+        /* Return on an invalid beacon state */
+        if (state->bs_interval < 1)
+                return -EINVAL;
+
+        interval = state->bs_interval;
+        dtim = state->bs_dtim_period;
+
+        /*
+         * PCF support?
+         */
+        if (state->bs_cfp_period > 0) {
+                /*
+                 * Enable PCF mode and set the CFP
+                 * (Contention Free Period) and timer registers
+                 */
+                cfp_period = state->bs_cfp_period * state->bs_dtim_period *
+                        state->bs_interval;
+                next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) *
+                        state->bs_interval;
+
+                AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
+                                AR5K_STA_ID1_DEFAULT_ANTENNA |
+                                AR5K_STA_ID1_PCF);
+                ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD);
+                ath5k_hw_reg_write(ah, state->bs_cfp_max_duration,
+                                AR5K_CFP_DUR);
+                ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period :
+                                                next_cfp)) << 3, AR5K_TIMER2);
+        } else {
+                /* Disable PCF mode */
+                AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+                                AR5K_STA_ID1_DEFAULT_ANTENNA |
+                                AR5K_STA_ID1_PCF);
+        }
+
+        /*
+         * Enable the beacon timer register
+         */
+        ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0);
+
+        /*
+         * Start the beacon timers
+         */
+        ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &~
+                (AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) |
+                AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0,
+                AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval,
+                AR5K_BEACON_PERIOD), AR5K_BEACON);
+
+        /*
+         * Write new beacon miss threshold, if it appears to be valid
+         * XXX: Figure out right values for min <= bs_bmiss_threshold <= max
+         * and return if its not in range. We can test this by reading value and
+         * setting value to a largest value and seeing which values register.
+         */
+
+        AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS,
+                        state->bs_bmiss_threshold);
+
+        /*
+         * Set sleep control register
+         * XXX: Didn't find this in 5210 code but since this register
+         * exists also in ar5k's 5210 headers i leave it as common code.
+         */
+        AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR,
+                        (state->bs_sleep_duration - 3) << 3);
+
+        /*
+         * Set enhanced sleep registers on 5212
+         */
+        if (ah->ah_version == AR5K_AR5212) {
+                if (state->bs_sleep_duration > state->bs_interval &&
+                                roundup(state->bs_sleep_duration, interval) ==
+                                state->bs_sleep_duration)
+                        interval = state->bs_sleep_duration;
+
+                if (state->bs_sleep_duration > dtim && (dtim == 0 ||
+                                roundup(state->bs_sleep_duration, dtim) ==
+                                state->bs_sleep_duration))
+                        dtim = state->bs_sleep_duration;
+
+                if (interval > dtim)
+                        return -EINVAL;
+
+                next_beacon = interval == dtim ? state->bs_next_dtim :
+                        state->bs_next_beacon;
+
+                ath5k_hw_reg_write(ah,
+                        AR5K_REG_SM((state->bs_next_dtim - 3) << 3,
+                        AR5K_SLEEP0_NEXT_DTIM) |
+                        AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) |
+                        AR5K_SLEEP0_ENH_SLEEP_EN |
+                        AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0);
+
+                ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3,
+                        AR5K_SLEEP1_NEXT_TIM) |
+                        AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1);
+
+                ath5k_hw_reg_write(ah,
+                        AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) |
+                        AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2);
+        }
+
+        return 0;
+}
+
+/*
+ * Reset beacon timers
+ */
+void ath5k_hw_reset_beacon(struct ath5k_hw *ah)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        /*
+         * Disable beacon timer
+         */
+        ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
+
+        /*
+         * Disable some beacon register values
+         */
+        AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+                        AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF);
+        ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON);
+}
+
+/*
+ * Wait for beacon queue to finish
+ */
+int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr)
+{
+        unsigned int i;
+        int ret;
+
+        ATH5K_TRACE(ah->ah_sc);
+
+        /* 5210 doesn't have QCU*/
+        if (ah->ah_version == AR5K_AR5210) {
+                /*
+                 * Wait for beaconn queue to finish by checking
+                 * Control Register and Beacon Status Register.
+                 */
+                for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) {
+                        if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F)
+                                        ||
+                            !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F))
+                                break;
+                        udelay(10);
+                }
+
+                /* Timeout... */
+                if (i <= 0) {
+                        /*
+                         * Re-schedule the beacon queue
+                         */
+                        ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1);
+                        ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
+                                        AR5K_BCR);
+
+                        return -EIO;
+                }
+                ret = 0;
+        } else {
+        /*5211/5212*/
+                ret = ath5k_hw_register_timeout(ah,
+                        AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON),
+                        AR5K_QCU_STS_FRMPENDCNT, 0, false);
+
+                if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON))
+                        return -EIO;
+        }
+
+        return ret;
+}
+#endif
+
+/*
+ * Update mib counters (statistics)
+ */
+void ath5k_hw_update_mib_counters(struct ath5k_hw *ah,
+                struct ath5k_mib_stats *statistics)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        /* Read-And-Clear */
+        statistics->ackrcv_bad += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL);
+        statistics->rts_bad += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL);
+        statistics->rts_good += ath5k_hw_reg_read(ah, AR5K_RTS_OK);
+        statistics->fcs_bad += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL);
+        statistics->beacons += ath5k_hw_reg_read(ah, AR5K_BEACON_CNT);
+
+        /* Reset profile count registers on 5212*/
+        if (ah->ah_version == AR5K_AR5212) {
+                ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX);
+                ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX);
+                ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR);
+                ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE);
+        }
+}
+
+/** ath5k_hw_set_ack_bitrate - set bitrate for ACKs
+ *
+ * @ah: the &struct ath5k_hw
+ * @high: determines if to use low bit rate or now
+ */
+void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high)
+{
+        if (ah->ah_version != AR5K_AR5212)
+                return;
+        else {
+                u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
+                if (high)
+                        AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
+                else
+                        AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
+        }
+}
+
+
+/*
+ * ACK/CTS Timeouts
+ */
+
+/*
+ * Set ACK timeout on PCU
+ */
+int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK),
+                        ah->ah_turbo) <= timeout)
+                return -EINVAL;
+
+        AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK,
+                ath5k_hw_htoclock(timeout, ah->ah_turbo));
+
+        return 0;
+}
+
+/*
+ * Read the ACK timeout from PCU
+ */
+unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah)
+{
+        ATH5K_TRACE(ah->ah_sc);
+
+        return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
+                        AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo);
+}
+
+/*
+ * Set CTS timeout on PCU
+ */
+int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS),
+                        ah->ah_turbo) <= timeout)
+                return -EINVAL;
+
+        AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS,
+                        ath5k_hw_htoclock(timeout, ah->ah_turbo));
+
+        return 0;
+}
+
+/*
+ * Read CTS timeout from PCU
+ */
+unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
+                        AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo);
+}
+
+/*
+ * Key table (WEP) functions
+ */
+
+int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
+{
+        unsigned int i;
+
+        ATH5K_TRACE(ah->ah_sc);
+        AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+        for (i = 0; i < AR5K_KEYCACHE_SIZE; i++)
+                ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i));
+
+        /* Set NULL encryption on non-5210*/
+        if (ah->ah_version != AR5K_AR5210)
+                ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
+                                AR5K_KEYTABLE_TYPE(entry));
+
+        return 0;
+}
+
+int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+        /* Check the validation flag at the end of the entry */
+        return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) &
+                AR5K_KEYTABLE_VALID;
+}
+
+int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry,
+                const struct ieee80211_key_conf *key, const u8 *mac)
+{
+        unsigned int i;
+        __le32 key_v[5] = {};
+        u32 keytype;
+
+        ATH5K_TRACE(ah->ah_sc);
+
+        /* key->keylen comes in from mac80211 in bytes */
+
+        if (key->keylen > AR5K_KEYTABLE_SIZE / 8)
+                return -EOPNOTSUPP;
+
+        switch (key->keylen) {
+        /* WEP 40-bit   = 40-bit  entered key + 24 bit IV = 64-bit */
+        case 40 / 8:
+                memcpy(&key_v[0], key->key, 5);
+                keytype = AR5K_KEYTABLE_TYPE_40;
+                break;
+
+        /* WEP 104-bit  = 104-bit entered key + 24-bit IV = 128-bit */
+        case 104 / 8:
+                memcpy(&key_v[0], &key->key[0], 6);
+                memcpy(&key_v[2], &key->key[6], 6);
+                memcpy(&key_v[4], &key->key[12], 1);
+                keytype = AR5K_KEYTABLE_TYPE_104;
+                break;
+        /* WEP 128-bit  = 128-bit entered key + 24 bit IV = 152-bit */
+        case 128 / 8:
+                memcpy(&key_v[0], &key->key[0], 6);
+                memcpy(&key_v[2], &key->key[6], 6);
+                memcpy(&key_v[4], &key->key[12], 4);
+                keytype = AR5K_KEYTABLE_TYPE_128;
+                break;
+
+        default:
+                return -EINVAL; /* shouldn't happen */
+        }
+
+        for (i = 0; i < ARRAY_SIZE(key_v); i++)
+                ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]),
+                                AR5K_KEYTABLE_OFF(entry, i));
+
+        ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry));
+
+        return ath5k_hw_set_key_lladdr(ah, entry, mac);
+}
+
+int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac)
+{
+        u32 low_id, high_id;
+
+        ATH5K_TRACE(ah->ah_sc);
+         /* Invalid entry (key table overflow) */
+        AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+        /* MAC may be NULL if it's a broadcast key. In this case no need to
+         * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */
+        if (unlikely(mac == NULL)) {
+                low_id = 0xffffffff;
+                high_id = 0xffff | AR5K_KEYTABLE_VALID;
+        } else {
+                low_id = AR5K_LOW_ID(mac);
+                high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID;
+        }
+
+        ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry));
+        ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry));
+
+        return 0;
+}
+
+
+/********************************************\
+Queue Control Unit, DFS Control Unit Functions
+\********************************************/
+
+/*
+ * Initialize a transmit queue
+ */
+int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
+                struct ath5k_txq_info *queue_info)
+{
+        unsigned int queue;
+        int ret;
+
+        ATH5K_TRACE(ah->ah_sc);
+
+        /*
+         * Get queue by type
+         */
+        /*5210 only has 2 queues*/
+        if (ah->ah_version == AR5K_AR5210) {
+                switch (queue_type) {
+                case AR5K_TX_QUEUE_DATA:
+                        queue = AR5K_TX_QUEUE_ID_NOQCU_DATA;
+                        break;
+                case AR5K_TX_QUEUE_BEACON:
+                case AR5K_TX_QUEUE_CAB:
+                        queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON;
+                        break;
+                default:
+                        return -EINVAL;
+                }
+        } else {
+                switch (queue_type) {
+                case AR5K_TX_QUEUE_DATA:
+                        for (queue = AR5K_TX_QUEUE_ID_DATA_MIN;
+                                ah->ah_txq[queue].tqi_type !=
+                                AR5K_TX_QUEUE_INACTIVE; queue++) {
+
+                                if (queue > AR5K_TX_QUEUE_ID_DATA_MAX)
+                                        return -EINVAL;
+                        }
+                        break;
+                case AR5K_TX_QUEUE_UAPSD:
+                        queue = AR5K_TX_QUEUE_ID_UAPSD;
+                        break;
+                case AR5K_TX_QUEUE_BEACON:
+                        queue = AR5K_TX_QUEUE_ID_BEACON;
+                        break;
+                case AR5K_TX_QUEUE_CAB:
+                        queue = AR5K_TX_QUEUE_ID_CAB;
+                        break;
+                case AR5K_TX_QUEUE_XR_DATA:
+                        if (ah->ah_version != AR5K_AR5212)
+                                ATH5K_ERR(ah->ah_sc,
+                                        "XR data queues only supported in"
+                                        " 5212!\n");
+                        queue = AR5K_TX_QUEUE_ID_XR_DATA;
+                        break;
+                default:
+                        return -EINVAL;
+                }
+        }
+
+        /*
+         * Setup internal queue structure
+         */
+        memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info));
+        ah->ah_txq[queue].tqi_type = queue_type;
+
+        if (queue_info != NULL) {
+                queue_info->tqi_type = queue_type;
+                ret = ath5k_hw_setup_tx_queueprops(ah, queue, queue_info);
+                if (ret)
+                        return ret;
+        }
+        /*
+         * We use ah_txq_status to hold a temp value for
+         * the Secondary interrupt mask registers on 5211+
+         * check out ath5k_hw_reset_tx_queue
+         */
+        AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue);
+
+        return queue;
+}
+
+/*
+ * Setup a transmit queue
+ */
+int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue,
+                                const struct ath5k_txq_info *queue_info)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+        if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+                return -EIO;
+
+        memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info));
+
+        /*XXX: Is this supported on 5210 ?*/
+        if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA &&
+                        ((queue_info->tqi_subtype == AR5K_WME_AC_VI) ||
+                        (queue_info->tqi_subtype == AR5K_WME_AC_VO))) ||
+                        queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD)
+                ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS;
+
+        return 0;
+}
+
+/*
+ * Get properties for a specific transmit queue
+ */
+int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
+                struct ath5k_txq_info *queue_info)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info));
+        return 0;
+}
+
+/*
+ * Set a transmit queue inactive
+ */
+void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num))
+                return;
+
+        /* This queue will be skipped in further operations */
+        ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE;
+        /*For SIMR setup*/
+        AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue);
+}
+
+/*
+ * Set DFS params for a transmit queue
+ */
+int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+        u32 cw_min, cw_max, retry_lg, retry_sh;
+        struct ath5k_txq_info *tq = &ah->ah_txq[queue];
+
+        ATH5K_TRACE(ah->ah_sc);
+        AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+        tq = &ah->ah_txq[queue];
+
+        if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE)
+                return 0;
+
+        if (ah->ah_version == AR5K_AR5210) {
+                /* Only handle data queues, others will be ignored */
+                if (tq->tqi_type != AR5K_TX_QUEUE_DATA)
+                        return 0;
+
+                /* Set Slot time */
+                ath5k_hw_reg_write(ah, ah->ah_turbo == true ?
+                        AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME,
+                        AR5K_SLOT_TIME);
+                /* Set ACK_CTS timeout */
+                ath5k_hw_reg_write(ah, ah->ah_turbo == true ?
+                        AR5K_INIT_ACK_CTS_TIMEOUT_TURBO :
+                        AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME);
+                /* Set Transmit Latency */
+                ath5k_hw_reg_write(ah, ah->ah_turbo == true ?
+                        AR5K_INIT_TRANSMIT_LATENCY_TURBO :
+                        AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210);
+                /* Set IFS0 */
+                if (ah->ah_turbo == true)
+                         ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO +
+                                (ah->ah_aifs + tq->tqi_aifs) *
+                                AR5K_INIT_SLOT_TIME_TURBO) <<
+                                AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO,
+                                AR5K_IFS0);
+                else
+                        ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS +
+                                (ah->ah_aifs + tq->tqi_aifs) *
+                                AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) |
+                                AR5K_INIT_SIFS, AR5K_IFS0);
+
+                /* Set IFS1 */
+                ath5k_hw_reg_write(ah, ah->ah_turbo == true ?
+                        AR5K_INIT_PROTO_TIME_CNTRL_TURBO :
+                        AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1);
+                /* Set PHY register 0x9844 (??) */
+                ath5k_hw_reg_write(ah, ah->ah_turbo == true ?
+                        (ath5k_hw_reg_read(ah, AR5K_PHY(17)) & ~0x7F) | 0x38 :
+                        (ath5k_hw_reg_read(ah, AR5K_PHY(17)) & ~0x7F) | 0x1C,
+                        AR5K_PHY(17));
+                /* Set Frame Control Register */
+                ath5k_hw_reg_write(ah, ah->ah_turbo == true ?
+                        (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE |
+                        AR5K_PHY_TURBO_SHORT | 0x2020) :
+                        (AR5K_PHY_FRAME_CTL_INI | 0x1020),
+                        AR5K_PHY_FRAME_CTL_5210);
+        }
+
+        /*
+         * Calculate cwmin/max by channel mode
+         */
+        cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN;
+        cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX;
+        ah->ah_aifs = AR5K_TUNE_AIFS;
+        /*XR is only supported on 5212*/
+        if (IS_CHAN_XR(ah->ah_current_channel) &&
+                        ah->ah_version == AR5K_AR5212) {
+                cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR;
+                cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR;
+                ah->ah_aifs = AR5K_TUNE_AIFS_XR;
+        /*B mode is not supported on 5210*/
+        } else if (IS_CHAN_B(ah->ah_current_channel) &&
+                        ah->ah_version != AR5K_AR5210) {
+                cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B;
+                cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B;
+                ah->ah_aifs = AR5K_TUNE_AIFS_11B;
+        }
+
+        cw_min = 1;
+        while (cw_min < ah->ah_cw_min)
+                cw_min = (cw_min << 1) | 1;
+
+        cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) :
+                ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1);
+        cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) :
+                ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1);
+
+        /*
+         * Calculate and set retry limits
+         */
+        if (ah->ah_software_retry == true) {
+                /* XXX Need to test this */
+                retry_lg = ah->ah_limit_tx_retries;
+                retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ?
+                        AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg;
+        } else {
+                retry_lg = AR5K_INIT_LG_RETRY;
+                retry_sh = AR5K_INIT_SH_RETRY;
+        }
+
+        /*No QCU/DCU [5210]*/
+        if (ah->ah_version == AR5K_AR5210) {
+                ath5k_hw_reg_write(ah,
+                        (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S)
+                        | AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
+                                AR5K_NODCU_RETRY_LMT_SLG_RETRY)
+                        | AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
+                                AR5K_NODCU_RETRY_LMT_SSH_RETRY)
+                        | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY)
+                        | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY),
+                        AR5K_NODCU_RETRY_LMT);
+        } else {
+                /*QCU/DCU [5211+]*/
+                ath5k_hw_reg_write(ah,
+                        AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
+                                AR5K_DCU_RETRY_LMT_SLG_RETRY) |
+                        AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
+                                AR5K_DCU_RETRY_LMT_SSH_RETRY) |
+                        AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) |
+                        AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY),
+                        AR5K_QUEUE_DFS_RETRY_LIMIT(queue));
+
+        /*===Rest is also for QCU/DCU only [5211+]===*/
+
+                /*
+                 * Set initial content window (cw_min/cw_max)
+                 * and arbitrated interframe space (aifs)...
+                 */
+                ath5k_hw_reg_write(ah,
+                        AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) |
+                        AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) |
+                        AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs,
+                                AR5K_DCU_LCL_IFS_AIFS),
+                        AR5K_QUEUE_DFS_LOCAL_IFS(queue));
+
+                /*
+                 * Set misc registers
+                 */
+                ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY,
+                        AR5K_QUEUE_MISC(queue));
+
+                if (tq->tqi_cbr_period) {
+                        ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period,
+                                AR5K_QCU_CBRCFG_INTVAL) |
+                                AR5K_REG_SM(tq->tqi_cbr_overflow_limit,
+                                AR5K_QCU_CBRCFG_ORN_THRES),
+                                AR5K_QUEUE_CBRCFG(queue));
+                        AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+                                AR5K_QCU_MISC_FRSHED_CBR);
+                        if (tq->tqi_cbr_overflow_limit)
+                                AR5K_REG_ENABLE_BITS(ah,
+                                        AR5K_QUEUE_MISC(queue),
+                                        AR5K_QCU_MISC_CBR_THRES_ENABLE);
+                }
+
+                if (tq->tqi_ready_time)
+                        ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time,
+                                AR5K_QCU_RDYTIMECFG_INTVAL) |
+                                AR5K_QCU_RDYTIMECFG_ENABLE,
+                                AR5K_QUEUE_RDYTIMECFG(queue));
+
+                if (tq->tqi_burst_time) {
+                        ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time,
+                                AR5K_DCU_CHAN_TIME_DUR) |
+                                AR5K_DCU_CHAN_TIME_ENABLE,
+                                AR5K_QUEUE_DFS_CHANNEL_TIME(queue));
+
+                        if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)
+                                AR5K_REG_ENABLE_BITS(ah,
+                                        AR5K_QUEUE_MISC(queue),
+                                        AR5K_QCU_MISC_TXE);
+                }
+
+                if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)
+                        ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS,
+                                AR5K_QUEUE_DFS_MISC(queue));
+
+                if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE)
+                        ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG,
+                                AR5K_QUEUE_DFS_MISC(queue));
+
+                /*
+                 * Set registers by queue type
+                 */
+                switch (tq->tqi_type) {
+                case AR5K_TX_QUEUE_BEACON:
+                        AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+                                AR5K_QCU_MISC_FRSHED_DBA_GT |
+                                AR5K_QCU_MISC_CBREXP_BCN |
+                                AR5K_QCU_MISC_BCN_ENABLE);
+
+                        AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+                                (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
+                                AR5K_DCU_MISC_ARBLOCK_CTL_S) |
+                                AR5K_DCU_MISC_POST_FR_BKOFF_DIS |
+                                AR5K_DCU_MISC_BCN_ENABLE);
+
+                        ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
+                                (AR5K_TUNE_SW_BEACON_RESP -
+                                AR5K_TUNE_DMA_BEACON_RESP) -
+                                AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) |
+                                AR5K_QCU_RDYTIMECFG_ENABLE,
+                                AR5K_QUEUE_RDYTIMECFG(queue));
+                        break;
+
+                case AR5K_TX_QUEUE_CAB:
+                        AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+                                AR5K_QCU_MISC_FRSHED_DBA_GT |
+                                AR5K_QCU_MISC_CBREXP |
+                                AR5K_QCU_MISC_CBREXP_BCN);
+
+                        AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+                                (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
+                                AR5K_DCU_MISC_ARBLOCK_CTL_S));
+                        break;
+
+                case AR5K_TX_QUEUE_UAPSD:
+                        AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+                                AR5K_QCU_MISC_CBREXP);
+                        break;
+
+                case AR5K_TX_QUEUE_DATA:
+                default:
+                        break;
+                }
+
+                /*
+                 * Enable interrupts for this tx queue
+                 * in the secondary interrupt mask registers
+                 */
+                if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE)
+                        AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue);
+
+                if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE)
+                        AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue);
+
+                if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE)
+                        AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue);
+
+                if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE)
+                        AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue);
+
+                if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE)
+                        AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue);
+
+
+                /* Update secondary interrupt mask registers */
+                ah->ah_txq_imr_txok &= ah->ah_txq_status;
+                ah->ah_txq_imr_txerr &= ah->ah_txq_status;
+                ah->ah_txq_imr_txurn &= ah->ah_txq_status;
+                ah->ah_txq_imr_txdesc &= ah->ah_txq_status;
+                ah->ah_txq_imr_txeol &= ah->ah_txq_status;
+
+                ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok,
+                        AR5K_SIMR0_QCU_TXOK) |
+                        AR5K_REG_SM(ah->ah_txq_imr_txdesc,
+                        AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0);
+                ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr,
+                        AR5K_SIMR1_QCU_TXERR) |
+                        AR5K_REG_SM(ah->ah_txq_imr_txeol,
+                        AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1);
+                ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn,
+                        AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2);
+        }
+
+        return 0;
+}
+
+/*
+ * Get number of pending frames
+ * for a specific queue [5211+]
+ */
+u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) {
+        ATH5K_TRACE(ah->ah_sc);
+        AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+        /* Return if queue is declared inactive */
+        if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+                return false;
+
+        /* XXX: How about AR5K_CFG_TXCNT ? */
+        if (ah->ah_version == AR5K_AR5210)
+                return false;
+
+        return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT;
+}
+
+/*
+ * Set slot time
+ */
+int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX)
+                return -EINVAL;
+
+        if (ah->ah_version == AR5K_AR5210)
+                ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time,
+                                ah->ah_turbo), AR5K_SLOT_TIME);
+        else
+                ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT);
+
+        return 0;
+}
+
+/*
+ * Get slot time
+ */
+unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        if (ah->ah_version == AR5K_AR5210)
+                return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah,
+                                AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo);
+        else
+                return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff;
+}
+
+
+/******************************\
+ Hardware Descriptor Functions
+\******************************/
+
+/*
+ * TX Descriptor
+ */
+
+/*
+ * Initialize the 2-word tx descriptor on 5210/5211
+ */
+static int
+ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+        unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type,
+        unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0,
+        unsigned int key_index, unsigned int antenna_mode, unsigned int flags,
+        unsigned int rtscts_rate, unsigned int rtscts_duration)
+{
+        u32 frame_type;
+        struct ath5k_hw_2w_tx_desc *tx_desc;
+        unsigned int buff_len;
+
+        tx_desc = (struct ath5k_hw_2w_tx_desc *)&desc->ds_ctl0;
+
+        /*
+         * Validate input
+         * - Zero retries don't make sense.
+         * - A zero rate will put the HW into a mode where it continously sends
+         *   noise on the channel, so it is important to avoid this.
+         */
+        if (unlikely(tx_tries0 == 0)) {
+                ATH5K_ERR(ah->ah_sc, "zero retries\n");
+                WARN_ON(1);
+                return -EINVAL;
+        }
+        if (unlikely(tx_rate0 == 0)) {
+                ATH5K_ERR(ah->ah_sc, "zero rate\n");
+                WARN_ON(1);
+                return -EINVAL;
+        }
+
+        /* Clear status descriptor */
+        memset(desc->ds_hw, 0, sizeof(struct ath5k_hw_tx_status));
+
+        /* Initialize control descriptor */
+        tx_desc->tx_control_0 = 0;
+        tx_desc->tx_control_1 = 0;
+
+        /* Setup control descriptor */
+
+        /* Verify and set frame length */
+        if (pkt_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN)
+                return -EINVAL;
+
+        tx_desc->tx_control_0 = pkt_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN;
+
+        /* Verify and set buffer length */
+        buff_len = pkt_len - FCS_LEN;
+
+        /* NB: beacon's BufLen must be a multiple of 4 bytes */
+        if(type == AR5K_PKT_TYPE_BEACON)
+                buff_len = roundup(buff_len, 4);
+
+        if (buff_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN)
+                return -EINVAL;
+
+        tx_desc->tx_control_1 = buff_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN;
+
+        /*
+         * Verify and set header length
+         * XXX: I only found that on 5210 code, does it work on 5211 ?
+         */
+        if (ah->ah_version == AR5K_AR5210) {
+                if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN)
+                        return -EINVAL;
+                tx_desc->tx_control_0 |=
+                        AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN);
+        }
+
+        /*Diferences between 5210-5211*/
+        if (ah->ah_version == AR5K_AR5210) {
+                switch (type) {
+                case AR5K_PKT_TYPE_BEACON:
+                case AR5K_PKT_TYPE_PROBE_RESP:
+                        frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY;
+                case AR5K_PKT_TYPE_PIFS:
+                        frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS;
+                default:
+                        frame_type = type /*<< 2 ?*/;
+                }
+
+                tx_desc->tx_control_0 |=
+                        AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) |
+                        AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
+        } else {
+                tx_desc->tx_control_0 |=
+                        AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) |
+                        AR5K_REG_SM(antenna_mode, AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT);
+                tx_desc->tx_control_1 |=
+                        AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE);
+        }
+#define _TX_FLAGS(_c, _flag)                                            \
+        if (flags & AR5K_TXDESC_##_flag)                                \
+                tx_desc->tx_control_##_c |=                             \
+                        AR5K_2W_TX_DESC_CTL##_c##_##_flag
+
+        _TX_FLAGS(0, CLRDMASK);
+        _TX_FLAGS(0, VEOL);
+        _TX_FLAGS(0, INTREQ);
+        _TX_FLAGS(0, RTSENA);
+        _TX_FLAGS(1, NOACK);
+
+#undef _TX_FLAGS
+
+        /*
+         * WEP crap
+         */
+        if (key_index != AR5K_TXKEYIX_INVALID) {
+                tx_desc->tx_control_0 |=
+                        AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
+                tx_desc->tx_control_1 |=
+                        AR5K_REG_SM(key_index,
+                        AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
+        }
+
+        /*
+         * RTS/CTS Duration [5210 ?]
+         */
+        if ((ah->ah_version == AR5K_AR5210) &&
+                        (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)))
+                tx_desc->tx_control_1 |= rtscts_duration &
+                                AR5K_2W_TX_DESC_CTL1_RTS_DURATION;
+
+        return 0;
+}
+
+/*
+ * Initialize the 4-word tx descriptor on 5212
+ */
+static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
+        struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len,
+        enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0,
+        unsigned int tx_tries0, unsigned int key_index,
+        unsigned int antenna_mode, unsigned int flags, unsigned int rtscts_rate,
+        unsigned int rtscts_duration)
+{
+        struct ath5k_hw_4w_tx_desc *tx_desc;
+        struct ath5k_hw_tx_status *tx_status;
+        unsigned int buff_len;
+
+        ATH5K_TRACE(ah->ah_sc);
+        tx_desc = (struct ath5k_hw_4w_tx_desc *)&desc->ds_ctl0;
+        tx_status = (struct ath5k_hw_tx_status *)&desc->ds_hw[2];
+
+        /*
+         * Validate input
+         * - Zero retries don't make sense.
+         * - A zero rate will put the HW into a mode where it continously sends
+         *   noise on the channel, so it is important to avoid this.
+         */
+        if (unlikely(tx_tries0 == 0)) {
+                ATH5K_ERR(ah->ah_sc, "zero retries\n");
+                WARN_ON(1);
+                return -EINVAL;
+        }
+        if (unlikely(tx_rate0 == 0)) {
+                ATH5K_ERR(ah->ah_sc, "zero rate\n");
+                WARN_ON(1);
+                return -EINVAL;
+        }
+
+        /* Clear status descriptor */
+        memset(tx_status, 0, sizeof(struct ath5k_hw_tx_status));
+
+        /* Initialize control descriptor */
+        tx_desc->tx_control_0 = 0;
+        tx_desc->tx_control_1 = 0;
+        tx_desc->tx_control_2 = 0;
+        tx_desc->tx_control_3 = 0;
+
+        /* Setup control descriptor */
+
+        /* Verify and set frame length */
+        if (pkt_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN)
+                return -EINVAL;
+
+        tx_desc->tx_control_0 = pkt_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN;
+
+        /* Verify and set buffer length */
+        buff_len = pkt_len - FCS_LEN;
+
+        /* NB: beacon's BufLen must be a multiple of 4 bytes */
+        if(type == AR5K_PKT_TYPE_BEACON)
+                buff_len = roundup(buff_len, 4);
+
+        if (buff_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN)
+                return -EINVAL;
+
+        tx_desc->tx_control_1 = buff_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN;
+
+        tx_desc->tx_control_0 |=
+                AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) |
+                AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT);
+        tx_desc->tx_control_1 |= AR5K_REG_SM(type,
+                                        AR5K_4W_TX_DESC_CTL1_FRAME_TYPE);
+        tx_desc->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES,
+                                        AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0);
+        tx_desc->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
+
+#define _TX_FLAGS(_c, _flag)                    \
+        if (flags & AR5K_TXDESC_##_flag)        \
+                tx_desc->tx_control_##_c |=     \
+                        AR5K_4W_TX_DESC_CTL##_c##_##_flag
+
+        _TX_FLAGS(0, CLRDMASK);
+        _TX_FLAGS(0, VEOL);
+        _TX_FLAGS(0, INTREQ);
+        _TX_FLAGS(0, RTSENA);
+        _TX_FLAGS(0, CTSENA);
+        _TX_FLAGS(1, NOACK);
+
+#undef _TX_FLAGS
+
+        /*
+         * WEP crap
+         */
+        if (key_index != AR5K_TXKEYIX_INVALID) {
+                tx_desc->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
+                tx_desc->tx_control_1 |= AR5K_REG_SM(key_index,
+                                AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
+        }
+
+        /*
+         * RTS/CTS
+         */
+        if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) {
+                if ((flags & AR5K_TXDESC_RTSENA) &&
+                                (flags & AR5K_TXDESC_CTSENA))
+                        return -EINVAL;
+                tx_desc->tx_control_2 |= rtscts_duration &
+                                AR5K_4W_TX_DESC_CTL2_RTS_DURATION;
+                tx_desc->tx_control_3 |= AR5K_REG_SM(rtscts_rate,
+                                AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE);
+        }
+
+        return 0;
+}
+
+/*
+ * Initialize a 4-word multirate tx descriptor on 5212
+ */
+static bool
+ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+        unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, u_int tx_tries2,
+        unsigned int tx_rate3, u_int tx_tries3)
+{
+        struct ath5k_hw_4w_tx_desc *tx_desc;
+
+        /*
+         * Rates can be 0 as long as the retry count is 0 too.
+         * A zero rate and nonzero retry count will put the HW into a mode where
+         * it continously sends noise on the channel, so it is important to
+         * avoid this.
+         */
+        if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) ||
+                     (tx_rate2 == 0 && tx_tries2 != 0) ||
+                     (tx_rate3 == 0 && tx_tries3 != 0))) {
+                ATH5K_ERR(ah->ah_sc, "zero rate\n");
+                WARN_ON(1);
+                return -EINVAL;
+        }
+
+        if (ah->ah_version == AR5K_AR5212) {
+                tx_desc = (struct ath5k_hw_4w_tx_desc *)&desc->ds_ctl0;
+
+#define _XTX_TRIES(_n)                                                  \
+        if (tx_tries##_n) {                                             \
+                tx_desc->tx_control_2 |=                                \
+                    AR5K_REG_SM(tx_tries##_n,                           \
+                    AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n);               \
+                tx_desc->tx_control_3 |=                                \
+                    AR5K_REG_SM(tx_rate##_n,                            \
+                    AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n);                \
+        }
+
+                _XTX_TRIES(1);
+                _XTX_TRIES(2);
+                _XTX_TRIES(3);
+
+#undef _XTX_TRIES
+
+                return true;
+        }
+
+        return false;
+}
+
+/*
+ * Proccess the tx status descriptor on 5210/5211
+ */
+static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
+                struct ath5k_desc *desc)
+{
+        struct ath5k_hw_tx_status *tx_status;
+        struct ath5k_hw_2w_tx_desc *tx_desc;
+
+        tx_desc = (struct ath5k_hw_2w_tx_desc *)&desc->ds_ctl0;
+        tx_status = (struct ath5k_hw_tx_status *)&desc->ds_hw[0];
+
+        /* No frame has been send or error */
+        if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0))
+                return -EINPROGRESS;
+
+        /*
+         * Get descriptor status
+         */
+        desc->ds_us.tx.ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
+                AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
+        desc->ds_us.tx.ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
+                AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
+        desc->ds_us.tx.ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
+                AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
+        /*TODO: desc->ds_us.tx.ts_virtcol + test*/
+        desc->ds_us.tx.ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
+                AR5K_DESC_TX_STATUS1_SEQ_NUM);
+        desc->ds_us.tx.ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
+                AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
+        desc->ds_us.tx.ts_antenna = 1;
+        desc->ds_us.tx.ts_status = 0;
+        desc->ds_us.tx.ts_rate = AR5K_REG_MS(tx_desc->tx_control_0,
+                AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
+
+        if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){
+                if (tx_status->tx_status_0 &
+                                AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
+                        desc->ds_us.tx.ts_status |= AR5K_TXERR_XRETRY;
+
+                if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
+                        desc->ds_us.tx.ts_status |= AR5K_TXERR_FIFO;
+
+                if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
+                        desc->ds_us.tx.ts_status |= AR5K_TXERR_FILT;
+        }
+
+        return 0;
+}
+
+/*
+ * Proccess a tx descriptor on 5212
+ */
+static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
+                struct ath5k_desc *desc)
+{
+        struct ath5k_hw_tx_status *tx_status;
+        struct ath5k_hw_4w_tx_desc *tx_desc;
+
+        ATH5K_TRACE(ah->ah_sc);
+        tx_desc = (struct ath5k_hw_4w_tx_desc *)&desc->ds_ctl0;
+        tx_status = (struct ath5k_hw_tx_status *)&desc->ds_hw[2];
+
+        /* No frame has been send or error */
+        if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0))
+                return -EINPROGRESS;
+
+        /*
+         * Get descriptor status
+         */
+        desc->ds_us.tx.ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
+                AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
+        desc->ds_us.tx.ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
+                AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
+        desc->ds_us.tx.ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
+                AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
+        desc->ds_us.tx.ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
+                AR5K_DESC_TX_STATUS1_SEQ_NUM);
+        desc->ds_us.tx.ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
+                AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
+        desc->ds_us.tx.ts_antenna = (tx_status->tx_status_1 &
+                AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1;
+        desc->ds_us.tx.ts_status = 0;
+
+        switch (AR5K_REG_MS(tx_status->tx_status_1,
+                        AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX)) {
+        case 0:
+                desc->ds_us.tx.ts_rate = tx_desc->tx_control_3 &
+                        AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
+                break;
+        case 1:
+                desc->ds_us.tx.ts_rate = AR5K_REG_MS(tx_desc->tx_control_3,
+                        AR5K_4W_TX_DESC_CTL3_XMIT_RATE1);
+                desc->ds_us.tx.ts_longretry +=AR5K_REG_MS(tx_desc->tx_control_2,
+                        AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
+                break;
+        case 2:
+                desc->ds_us.tx.ts_rate = AR5K_REG_MS(tx_desc->tx_control_3,
+                        AR5K_4W_TX_DESC_CTL3_XMIT_RATE2);
+                desc->ds_us.tx.ts_longretry +=AR5K_REG_MS(tx_desc->tx_control_2,
+                        AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2);
+                break;
+        case 3:
+                desc->ds_us.tx.ts_rate = AR5K_REG_MS(tx_desc->tx_control_3,
+                        AR5K_4W_TX_DESC_CTL3_XMIT_RATE3);
+                desc->ds_us.tx.ts_longretry +=AR5K_REG_MS(tx_desc->tx_control_2,
+                        AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3);
+                break;
+        }
+
+        if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){
+                if (tx_status->tx_status_0 &
+                                AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
+                        desc->ds_us.tx.ts_status |= AR5K_TXERR_XRETRY;
+
+                if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
+                        desc->ds_us.tx.ts_status |= AR5K_TXERR_FIFO;
+
+                if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
+                        desc->ds_us.tx.ts_status |= AR5K_TXERR_FILT;
+        }
+
+        return 0;
+}
+
+/*
+ * RX Descriptor
+ */
+
+/*
+ * Initialize an rx descriptor
+ */
+int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+                        u32 size, unsigned int flags)
+{
+        struct ath5k_rx_desc *rx_desc;
+
+        ATH5K_TRACE(ah->ah_sc);
+        rx_desc = (struct ath5k_rx_desc *)&desc->ds_ctl0;
+
+        /*
+         *Clear ds_hw
+         * If we don't clean the status descriptor,
+         * while scanning we get too many results,
+         * most of them virtual, after some secs
+         * of scanning system hangs. M.F.
+        */
+        memset(desc->ds_hw, 0, sizeof(desc->ds_hw));
+
+        /*Initialize rx descriptor*/
+        rx_desc->rx_control_0 = 0;
+        rx_desc->rx_control_1 = 0;
+
+        /* Setup descriptor */
+        rx_desc->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN;
+        if (unlikely(rx_desc->rx_control_1 != size))
+                return -EINVAL;
+
+        if (flags & AR5K_RXDESC_INTREQ)
+                rx_desc->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ;
+
+        return 0;
+}
+
+/*
+ * Proccess the rx status descriptor on 5210/5211
+ */
+static int ath5k_hw_proc_old_rx_status(struct ath5k_hw *ah,
+                struct ath5k_desc *desc)
+{
+        struct ath5k_hw_old_rx_status *rx_status;
+
+        rx_status = (struct ath5k_hw_old_rx_status *)&desc->ds_hw[0];
+
+        /* No frame received / not ready */
+        if (unlikely((rx_status->rx_status_1 & AR5K_OLD_RX_DESC_STATUS1_DONE)
+                                == 0))
+                return -EINPROGRESS;
+
+        /*
+         * Frame receive status
+         */
+        desc->ds_us.rx.rs_datalen = rx_status->rx_status_0 &
+                AR5K_OLD_RX_DESC_STATUS0_DATA_LEN;
+        desc->ds_us.rx.rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
+                AR5K_OLD_RX_DESC_STATUS0_RECEIVE_SIGNAL);
+        desc->ds_us.rx.rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
+                AR5K_OLD_RX_DESC_STATUS0_RECEIVE_RATE);
+        desc->ds_us.rx.rs_antenna = rx_status->rx_status_0 &
+                AR5K_OLD_RX_DESC_STATUS0_RECEIVE_ANTENNA;
+        desc->ds_us.rx.rs_more = rx_status->rx_status_0 &
+                AR5K_OLD_RX_DESC_STATUS0_MORE;
+        desc->ds_us.rx.rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
+                AR5K_OLD_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
+        desc->ds_us.rx.rs_status = 0;
+
+        /*
+         * Key table status
+         */
+        if (rx_status->rx_status_1 & AR5K_OLD_RX_DESC_STATUS1_KEY_INDEX_VALID)
+                desc->ds_us.rx.rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
+                        AR5K_OLD_RX_DESC_STATUS1_KEY_INDEX);
+        else
+                desc->ds_us.rx.rs_keyix = AR5K_RXKEYIX_INVALID;
+
+        /*
+         * Receive/descriptor errors
+         */
+        if ((rx_status->rx_status_1 & AR5K_OLD_RX_DESC_STATUS1_FRAME_RECEIVE_OK)
+                        == 0) {
+                if (rx_status->rx_status_1 & AR5K_OLD_RX_DESC_STATUS1_CRC_ERROR)
+                        desc->ds_us.rx.rs_status |= AR5K_RXERR_CRC;
+
+                if (rx_status->rx_status_1 &
+                                AR5K_OLD_RX_DESC_STATUS1_FIFO_OVERRUN)
+                        desc->ds_us.rx.rs_status |= AR5K_RXERR_FIFO;
+
+                if (rx_status->rx_status_1 &
+                                AR5K_OLD_RX_DESC_STATUS1_PHY_ERROR) {
+                        desc->ds_us.rx.rs_status |= AR5K_RXERR_PHY;
+                        desc->ds_us.rx.rs_phyerr =
+                                AR5K_REG_MS(rx_status->rx_status_1,
+                                        AR5K_OLD_RX_DESC_STATUS1_PHY_ERROR);
+                }
+
+                if (rx_status->rx_status_1 &
+                                AR5K_OLD_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
+                        desc->ds_us.rx.rs_status |= AR5K_RXERR_DECRYPT;
+        }
+
+        return 0;
+}
+
+/*
+ * Proccess the rx status descriptor on 5212
+ */
+static int ath5k_hw_proc_new_rx_status(struct ath5k_hw *ah,
+                struct ath5k_desc *desc)
+{
+        struct ath5k_hw_new_rx_status *rx_status;
+        struct ath5k_hw_rx_error *rx_err;
+
+        ATH5K_TRACE(ah->ah_sc);
+        rx_status = (struct ath5k_hw_new_rx_status *)&desc->ds_hw[0];
+
+        /* Overlay on error */
+        rx_err = (struct ath5k_hw_rx_error *)&desc->ds_hw[0];
+
+        /* No frame received / not ready */
+        if (unlikely((rx_status->rx_status_1 & AR5K_NEW_RX_DESC_STATUS1_DONE)
+                                == 0))
+                return -EINPROGRESS;
+
+        /*
+         * Frame receive status
+         */
+        desc->ds_us.rx.rs_datalen = rx_status->rx_status_0 &
+                AR5K_NEW_RX_DESC_STATUS0_DATA_LEN;
+        desc->ds_us.rx.rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
+                AR5K_NEW_RX_DESC_STATUS0_RECEIVE_SIGNAL);
+        desc->ds_us.rx.rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
+                AR5K_NEW_RX_DESC_STATUS0_RECEIVE_RATE);
+        desc->ds_us.rx.rs_antenna = rx_status->rx_status_0 &
+                AR5K_NEW_RX_DESC_STATUS0_RECEIVE_ANTENNA;
+        desc->ds_us.rx.rs_more = rx_status->rx_status_0 &
+                AR5K_NEW_RX_DESC_STATUS0_MORE;
+        desc->ds_us.rx.rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
+                AR5K_NEW_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
+        desc->ds_us.rx.rs_status = 0;
+
+        /*
+         * Key table status
+         */
+        if (rx_status->rx_status_1 & AR5K_NEW_RX_DESC_STATUS1_KEY_INDEX_VALID)
+                desc->ds_us.rx.rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
+                                AR5K_NEW_RX_DESC_STATUS1_KEY_INDEX);
+        else
+                desc->ds_us.rx.rs_keyix = AR5K_RXKEYIX_INVALID;
+
+        /*
+         * Receive/descriptor errors
+         */
+        if ((rx_status->rx_status_1 &
+                        AR5K_NEW_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) {
+                if (rx_status->rx_status_1 & AR5K_NEW_RX_DESC_STATUS1_CRC_ERROR)
+                        desc->ds_us.rx.rs_status |= AR5K_RXERR_CRC;
+
+                if (rx_status->rx_status_1 &
+                                AR5K_NEW_RX_DESC_STATUS1_PHY_ERROR) {
+                        desc->ds_us.rx.rs_status |= AR5K_RXERR_PHY;
+                        desc->ds_us.rx.rs_phyerr =
+                                AR5K_REG_MS(rx_err->rx_error_1,
+                                        AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE);
+                }
+
+                if (rx_status->rx_status_1 &
+                                AR5K_NEW_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
+                        desc->ds_us.rx.rs_status |= AR5K_RXERR_DECRYPT;
+
+                if (rx_status->rx_status_1 & AR5K_NEW_RX_DESC_STATUS1_MIC_ERROR)
+                        desc->ds_us.rx.rs_status |= AR5K_RXERR_MIC;
+        }
+
+        return 0;
+}
+
+
+/****************\
+  GPIO Functions
+\****************/
+
+/*
+ * Set led state
+ */
+void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state)
+{
+        u32 led;
+        /*5210 has different led mode handling*/
+        u32 led_5210;
+
+        ATH5K_TRACE(ah->ah_sc);
+
+        /*Reset led status*/
+        if (ah->ah_version != AR5K_AR5210)
+                AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
+                        AR5K_PCICFG_LEDMODE |  AR5K_PCICFG_LED);
+        else
+                AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED);
+
+        /*
+         * Some blinking values, define at your wish
+         */
+        switch (state) {
+        case AR5K_LED_SCAN:
+        case AR5K_LED_AUTH:
+                led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND;
+                led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL;
+                break;
+
+        case AR5K_LED_INIT:
+                led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE;
+                led_5210 = AR5K_PCICFG_LED_PEND;
+                break;
+
+        case AR5K_LED_ASSOC:
+        case AR5K_LED_RUN:
+                led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC;
+                led_5210 = AR5K_PCICFG_LED_ASSOC;
+                break;
+
+        default:
+                led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE;
+                led_5210 = AR5K_PCICFG_LED_PEND;
+                break;
+        }
+
+        /*Write new status to the register*/
+        if (ah->ah_version != AR5K_AR5210)
+                AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led);
+        else
+                AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210);
+}
+
+/*
+ * Set GPIO outputs
+ */
+int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        if (gpio > AR5K_NUM_GPIO)
+                return -EINVAL;
+
+        ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~
+                AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR);
+
+        return 0;
+}
+
+/*
+ * Set GPIO inputs
+ */
+int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        if (gpio > AR5K_NUM_GPIO)
+                return -EINVAL;
+
+        ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~
+                AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR);
+
+        return 0;
+}
+
+/*
+ * Get GPIO state
+ */
+u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        if (gpio > AR5K_NUM_GPIO)
+                return 0xffffffff;
+
+        /* GPIO input magic */
+        return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) &
+                0x1;
+}
+
+/*
+ * Set GPIO state
+ */
+int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val)
+{
+        u32 data;
+        ATH5K_TRACE(ah->ah_sc);
+
+        if (gpio > AR5K_NUM_GPIO)
+                return -EINVAL;
+
+        /* GPIO output magic */
+        data = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+        data &= ~(1 << gpio);
+        data |= (val & 1) << gpio;
+
+        ath5k_hw_reg_write(ah, data, AR5K_GPIODO);
+
+        return 0;
+}
+
+/*
+ * Initialize the GPIO interrupt (RFKill switch)
+ */
+void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
+                u32 interrupt_level)
+{
+        u32 data;
+
+        ATH5K_TRACE(ah->ah_sc);
+        if (gpio > AR5K_NUM_GPIO)
+                return;
+
+        /*
+         * Set the GPIO interrupt
+         */
+        data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &
+                ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH |
+                AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) |
+                (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA);
+
+        ath5k_hw_reg_write(ah, interrupt_level ? data :
+                (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR);
+
+        ah->ah_imr |= AR5K_IMR_GPIO;
+
+        /* Enable GPIO interrupts */
+        AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO);
+}
+
+
+/*********************************\
+ Regulatory Domain/Channels Setup
+\*********************************/
+
+u16 ath5k_get_regdomain(struct ath5k_hw *ah)
+{
+        u16 regdomain;
+        enum ath5k_regdom ieee_regdomain;
+#ifdef COUNTRYCODE
+        u16 code;
+#endif
+
+        ath5k_eeprom_regulation_domain(ah, false, &ieee_regdomain);
+        ah->ah_capabilities.cap_regdomain.reg_hw = ieee_regdomain;
+
+#ifdef COUNTRYCODE
+        /*
+         * Get the regulation domain by country code. This will ignore
+         * the settings found in the EEPROM.
+         */
+        code = ieee80211_name2countrycode(COUNTRYCODE);
+        ieee_regdomain = ieee80211_countrycode2regdomain(code);
+#endif
+
+        regdomain = ath5k_regdom_from_ieee(ieee_regdomain);
+        ah->ah_capabilities.cap_regdomain.reg_current = regdomain;
+
+        return regdomain;
+}
+
+
+/****************\
+  Misc functions
+\****************/
+
+int ath5k_hw_get_capability(struct ath5k_hw *ah,
+                enum ath5k_capability_type cap_type,
+                u32 capability, u32 *result)
+{
+        ATH5K_TRACE(ah->ah_sc);
+
+        switch (cap_type) {
+        case AR5K_CAP_NUM_TXQUEUES:
+                if (result) {
+                        if (ah->ah_version == AR5K_AR5210)
+                                *result = AR5K_NUM_TX_QUEUES_NOQCU;
+                        else
+                                *result = AR5K_NUM_TX_QUEUES;
+                        goto yes;
+                }
+        case AR5K_CAP_VEOL:
+                goto yes;
+        case AR5K_CAP_COMPRESSION:
+                if (ah->ah_version == AR5K_AR5212)
+                        goto yes;
+                else
+                        goto no;
+        case AR5K_CAP_BURST:
+                goto yes;
+        case AR5K_CAP_TPC:
+                goto yes;
+        case AR5K_CAP_BSSIDMASK:
+                if (ah->ah_version == AR5K_AR5212)
+                        goto yes;
+                else
+                        goto no;
+        case AR5K_CAP_XR:
+                if (ah->ah_version == AR5K_AR5212)
+                        goto yes;
+                else
+                        goto no;
+        default:
+                goto no;
+        }
+
+no:
+        return -EINVAL;
+yes:
+        return 0;
+}
+
+static int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid,
+                u16 assoc_id)
+{
+        ATH5K_TRACE(ah->ah_sc);
+
+        if (ah->ah_version == AR5K_AR5210) {
+                AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+                        AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
+                return 0;
+        }
+
+        return -EIO;
+}
+
+static int ath5k_hw_disable_pspoll(struct ath5k_hw *ah)
+{
+        ATH5K_TRACE(ah->ah_sc);
+
+        if (ah->ah_version == AR5K_AR5210) {
+                AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
+                        AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
+                return 0;
+        }
+
+        return -EIO;
+}
diff --git a/drivers/net/wireless/ath5k/hw.h b/drivers/net/wireless/ath5k/hw.h
new file mode 100644
index 000000000000..d9a7c0973f53
--- /dev/null
+++ b/drivers/net/wireless/ath5k/hw.h
@@ -0,0 +1,588 @@
+/*
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007 Matthew W. S. Bell  <mentor@madwifi.org>
+ * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/delay.h>
+
+/*
+ * Gain settings
+ */
+
+enum ath5k_rfgain {
+        AR5K_RFGAIN_INACTIVE = 0,
+        AR5K_RFGAIN_READ_REQUESTED,
+        AR5K_RFGAIN_NEED_CHANGE,
+};
+
+#define AR5K_GAIN_CRN_FIX_BITS_5111             4
+#define AR5K_GAIN_CRN_FIX_BITS_5112             7
+#define AR5K_GAIN_CRN_MAX_FIX_BITS              AR5K_GAIN_CRN_FIX_BITS_5112
+#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN          15
+#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN          20
+#define AR5K_GAIN_CCK_PROBE_CORR                5
+#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA           15
+#define AR5K_GAIN_STEP_COUNT                    10
+#define AR5K_GAIN_PARAM_TX_CLIP                 0
+#define AR5K_GAIN_PARAM_PD_90                   1
+#define AR5K_GAIN_PARAM_PD_84                   2
+#define AR5K_GAIN_PARAM_GAIN_SEL                3
+#define AR5K_GAIN_PARAM_MIX_ORN                 0
+#define AR5K_GAIN_PARAM_PD_138                  1
+#define AR5K_GAIN_PARAM_PD_137                  2
+#define AR5K_GAIN_PARAM_PD_136                  3
+#define AR5K_GAIN_PARAM_PD_132                  4
+#define AR5K_GAIN_PARAM_PD_131                  5
+#define AR5K_GAIN_PARAM_PD_130                  6
+#define AR5K_GAIN_CHECK_ADJUST(_g)              \
+        ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)
+
+struct ath5k_gain_opt_step {
+        s16                             gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];
+        s32                             gos_gain;
+};
+
+struct ath5k_gain {
+        u32                     g_step_idx;
+        u32                     g_current;
+        u32                     g_target;
+        u32                     g_low;
+        u32                     g_high;
+        u32                     g_f_corr;
+        u32                     g_active;
+        const struct ath5k_gain_opt_step        *g_step;
+};
+
+
+/*
+ * HW SPECIFIC STRUCTS
+ */
+
+/* Some EEPROM defines */
+#define AR5K_EEPROM_EEP_SCALE           100
+#define AR5K_EEPROM_EEP_DELTA           10
+#define AR5K_EEPROM_N_MODES             3
+#define AR5K_EEPROM_N_5GHZ_CHAN         10
+#define AR5K_EEPROM_N_2GHZ_CHAN         3
+#define AR5K_EEPROM_MAX_CHAN            10
+#define AR5K_EEPROM_N_PCDAC             11
+#define AR5K_EEPROM_N_TEST_FREQ         8
+#define AR5K_EEPROM_N_EDGES             8
+#define AR5K_EEPROM_N_INTERCEPTS        11
+#define AR5K_EEPROM_FREQ_M(_v)          AR5K_EEPROM_OFF(_v, 0x7f, 0xff)
+#define AR5K_EEPROM_PCDAC_M             0x3f
+#define AR5K_EEPROM_PCDAC_START         1
+#define AR5K_EEPROM_PCDAC_STOP          63
+#define AR5K_EEPROM_PCDAC_STEP          1
+#define AR5K_EEPROM_NON_EDGE_M          0x40
+#define AR5K_EEPROM_CHANNEL_POWER       8
+#define AR5K_EEPROM_N_OBDB              4
+#define AR5K_EEPROM_OBDB_DIS            0xffff
+#define AR5K_EEPROM_CHANNEL_DIS         0xff
+#define AR5K_EEPROM_SCALE_OC_DELTA(_x)  (((_x) * 2) / 10)
+#define AR5K_EEPROM_N_CTLS(_v)          AR5K_EEPROM_OFF(_v, 16, 32)
+#define AR5K_EEPROM_MAX_CTLS            32
+#define AR5K_EEPROM_N_XPD_PER_CHANNEL   4
+#define AR5K_EEPROM_N_XPD0_POINTS       4
+#define AR5K_EEPROM_N_XPD3_POINTS       3
+#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35
+#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55
+#define AR5K_EEPROM_POWER_M             0x3f
+#define AR5K_EEPROM_POWER_MIN           0
+#define AR5K_EEPROM_POWER_MAX           3150
+#define AR5K_EEPROM_POWER_STEP          50
+#define AR5K_EEPROM_POWER_TABLE_SIZE    64
+#define AR5K_EEPROM_N_POWER_LOC_11B     4
+#define AR5K_EEPROM_N_POWER_LOC_11G     6
+#define AR5K_EEPROM_I_GAIN              10
+#define AR5K_EEPROM_CCK_OFDM_DELTA      15
+#define AR5K_EEPROM_N_IQ_CAL            2
+
+/* Struct to hold EEPROM calibration data */
+struct ath5k_eeprom_info {
+        u16     ee_magic;
+        u16     ee_protect;
+        u16     ee_regdomain;
+        u16     ee_version;
+        u16     ee_header;
+        u16     ee_ant_gain;
+        u16     ee_misc0;
+        u16     ee_misc1;
+        u16     ee_cck_ofdm_gain_delta;
+        u16     ee_cck_ofdm_power_delta;
+        u16     ee_scaled_cck_delta;
+
+        /* Used for tx thermal adjustment (eeprom_init, rfregs) */
+        u16     ee_tx_clip;
+        u16     ee_pwd_84;
+        u16     ee_pwd_90;
+        u16     ee_gain_select;
+
+        /* RF Calibration settings (reset, rfregs) */
+        u16     ee_i_cal[AR5K_EEPROM_N_MODES];
+        u16     ee_q_cal[AR5K_EEPROM_N_MODES];
+        u16     ee_fixed_bias[AR5K_EEPROM_N_MODES];
+        u16     ee_turbo_max_power[AR5K_EEPROM_N_MODES];
+        u16     ee_xr_power[AR5K_EEPROM_N_MODES];
+        u16     ee_switch_settling[AR5K_EEPROM_N_MODES];
+        u16     ee_ant_tx_rx[AR5K_EEPROM_N_MODES];
+        u16     ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC];
+        u16     ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
+        u16     ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
+        u16     ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES];
+        u16     ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES];
+        u16     ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES];
+        u16     ee_thr_62[AR5K_EEPROM_N_MODES];
+        u16     ee_xlna_gain[AR5K_EEPROM_N_MODES];
+        u16     ee_xpd[AR5K_EEPROM_N_MODES];
+        u16     ee_x_gain[AR5K_EEPROM_N_MODES];
+        u16     ee_i_gain[AR5K_EEPROM_N_MODES];
+        u16     ee_margin_tx_rx[AR5K_EEPROM_N_MODES];
+
+        /* Unused */
+        u16     ee_false_detect[AR5K_EEPROM_N_MODES];
+        u16     ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN];
+        u16     ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/
+
+        /* Conformance test limits (Unused) */
+        u16     ee_ctls;
+        u16     ee_ctl[AR5K_EEPROM_MAX_CTLS];
+
+        /* Noise Floor Calibration settings */
+        s16     ee_noise_floor_thr[AR5K_EEPROM_N_MODES];
+        s8      ee_adc_desired_size[AR5K_EEPROM_N_MODES];
+        s8      ee_pga_desired_size[AR5K_EEPROM_N_MODES];
+};
+
+/*
+ * Internal RX/TX descriptor structures
+ * (rX: reserved fields possibily used by future versions of the ar5k chipset)
+ */
+
+struct ath5k_rx_desc {
+        u32     rx_control_0; /* RX control word 0 */
+
+#define AR5K_DESC_RX_CTL0                       0x00000000
+
+        u32     rx_control_1; /* RX control word 1 */
+
+#define AR5K_DESC_RX_CTL1_BUF_LEN               0x00000fff
+#define AR5K_DESC_RX_CTL1_INTREQ                0x00002000
+} __packed;
+
+/*
+ * 5210/5211 rx status descriptor
+ */
+struct ath5k_hw_old_rx_status {
+        u32     rx_status_0; /* RX status word 0 */
+
+#define AR5K_OLD_RX_DESC_STATUS0_DATA_LEN               0x00000fff
+#define AR5K_OLD_RX_DESC_STATUS0_MORE                   0x00001000
+#define AR5K_OLD_RX_DESC_STATUS0_RECEIVE_RATE           0x00078000
+#define AR5K_OLD_RX_DESC_STATUS0_RECEIVE_RATE_S         15
+#define AR5K_OLD_RX_DESC_STATUS0_RECEIVE_SIGNAL         0x07f80000
+#define AR5K_OLD_RX_DESC_STATUS0_RECEIVE_SIGNAL_S       19
+#define AR5K_OLD_RX_DESC_STATUS0_RECEIVE_ANTENNA        0x38000000
+#define AR5K_OLD_RX_DESC_STATUS0_RECEIVE_ANTENNA_S      27
+
+        u32     rx_status_1; /* RX status word 1 */
+
+#define AR5K_OLD_RX_DESC_STATUS1_DONE                   0x00000001
+#define AR5K_OLD_RX_DESC_STATUS1_FRAME_RECEIVE_OK       0x00000002
+#define AR5K_OLD_RX_DESC_STATUS1_CRC_ERROR              0x00000004
+#define AR5K_OLD_RX_DESC_STATUS1_FIFO_OVERRUN           0x00000008
+#define AR5K_OLD_RX_DESC_STATUS1_DECRYPT_CRC_ERROR      0x00000010
+#define AR5K_OLD_RX_DESC_STATUS1_PHY_ERROR              0x000000e0
+#define AR5K_OLD_RX_DESC_STATUS1_PHY_ERROR_S            5
+#define AR5K_OLD_RX_DESC_STATUS1_KEY_INDEX_VALID        0x00000100
+#define AR5K_OLD_RX_DESC_STATUS1_KEY_INDEX              0x00007e00
+#define AR5K_OLD_RX_DESC_STATUS1_KEY_INDEX_S            9
+#define AR5K_OLD_RX_DESC_STATUS1_RECEIVE_TIMESTAMP      0x0fff8000
+#define AR5K_OLD_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S    15
+#define AR5K_OLD_RX_DESC_STATUS1_KEY_CACHE_MISS         0x10000000
+} __packed;
+
+/*
+ * 5212 rx status descriptor
+ */
+struct ath5k_hw_new_rx_status {
+        u32     rx_status_0; /* RX status word 0 */
+
+#define AR5K_NEW_RX_DESC_STATUS0_DATA_LEN               0x00000fff
+#define AR5K_NEW_RX_DESC_STATUS0_MORE                   0x00001000
+#define AR5K_NEW_RX_DESC_STATUS0_DECOMP_CRC_ERROR       0x00002000
+#define AR5K_NEW_RX_DESC_STATUS0_RECEIVE_RATE           0x000f8000
+#define AR5K_NEW_RX_DESC_STATUS0_RECEIVE_RATE_S         15
+#define AR5K_NEW_RX_DESC_STATUS0_RECEIVE_SIGNAL         0x0ff00000
+#define AR5K_NEW_RX_DESC_STATUS0_RECEIVE_SIGNAL_S       20
+#define AR5K_NEW_RX_DESC_STATUS0_RECEIVE_ANTENNA        0xf0000000
+#define AR5K_NEW_RX_DESC_STATUS0_RECEIVE_ANTENNA_S      28
+
+        u32     rx_status_1; /* RX status word 1 */
+
+#define AR5K_NEW_RX_DESC_STATUS1_DONE                   0x00000001
+#define AR5K_NEW_RX_DESC_STATUS1_FRAME_RECEIVE_OK       0x00000002
+#define AR5K_NEW_RX_DESC_STATUS1_CRC_ERROR              0x00000004
+#define AR5K_NEW_RX_DESC_STATUS1_DECRYPT_CRC_ERROR      0x00000008
+#define AR5K_NEW_RX_DESC_STATUS1_PHY_ERROR              0x00000010
+#define AR5K_NEW_RX_DESC_STATUS1_MIC_ERROR              0x00000020
+#define AR5K_NEW_RX_DESC_STATUS1_KEY_INDEX_VALID        0x00000100
+#define AR5K_NEW_RX_DESC_STATUS1_KEY_INDEX              0x0000fe00
+#define AR5K_NEW_RX_DESC_STATUS1_KEY_INDEX_S            9
+#define AR5K_NEW_RX_DESC_STATUS1_RECEIVE_TIMESTAMP      0x7fff0000
+#define AR5K_NEW_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S    16
+#define AR5K_NEW_RX_DESC_STATUS1_KEY_CACHE_MISS         0x80000000
+} __packed;
+
+struct ath5k_hw_rx_error {
+        u32     rx_error_0; /* RX error word 0 */
+
+#define AR5K_RX_DESC_ERROR0                     0x00000000
+
+        u32     rx_error_1; /* RX error word 1 */
+
+#define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE      0x0000ff00
+#define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE_S    8
+} __packed;
+
+#define AR5K_DESC_RX_PHY_ERROR_NONE             0x00
+#define AR5K_DESC_RX_PHY_ERROR_TIMING           0x20
+#define AR5K_DESC_RX_PHY_ERROR_PARITY           0x40
+#define AR5K_DESC_RX_PHY_ERROR_RATE             0x60
+#define AR5K_DESC_RX_PHY_ERROR_LENGTH           0x80
+#define AR5K_DESC_RX_PHY_ERROR_64QAM            0xa0
+#define AR5K_DESC_RX_PHY_ERROR_SERVICE          0xc0
+#define AR5K_DESC_RX_PHY_ERROR_TRANSMITOVR      0xe0
+
+struct ath5k_hw_2w_tx_desc {
+        u32     tx_control_0; /* TX control word 0 */
+
+#define AR5K_2W_TX_DESC_CTL0_FRAME_LEN          0x00000fff
+#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN         0x0003f000 /*[5210 ?]*/
+#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_S       12
+#define AR5K_2W_TX_DESC_CTL0_XMIT_RATE          0x003c0000
+#define AR5K_2W_TX_DESC_CTL0_XMIT_RATE_S        18
+#define AR5K_2W_TX_DESC_CTL0_RTSENA             0x00400000
+#define AR5K_2W_TX_DESC_CTL0_CLRDMASK           0x01000000
+#define AR5K_2W_TX_DESC_CTL0_LONG_PACKET        0x00800000 /*[5210]*/
+#define AR5K_2W_TX_DESC_CTL0_VEOL               0x00800000 /*[5211]*/
+#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE         0x1c000000 /*[5210]*/
+#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_S       26
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 0x02000000
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211 0x1e000000
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT      (ah->ah_version == AR5K_AR5210 ? \
+                                                AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \
+                                                AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211)
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_S    25
+#define AR5K_2W_TX_DESC_CTL0_INTREQ             0x20000000
+#define AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID  0x40000000
+
+        u32     tx_control_1; /* TX control word 1 */
+
+#define AR5K_2W_TX_DESC_CTL1_BUF_LEN            0x00000fff
+#define AR5K_2W_TX_DESC_CTL1_MORE               0x00001000
+#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210     0x0007e000
+#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211     0x000fe000
+#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX  (ah->ah_version == AR5K_AR5210 ? \
+                                                AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \
+                                                AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211)
+#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S        13
+#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE         0x00700000 /*[5211]*/
+#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_S       20
+#define AR5K_2W_TX_DESC_CTL1_NOACK              0x00800000 /*[5211]*/
+#define AR5K_2W_TX_DESC_CTL1_RTS_DURATION       0xfff80000 /*[5210 ?]*/
+} __packed;
+
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NORMAL   0x00
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_ATIM     0x04
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PSPOLL   0x08
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY 0x0c
+#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS     0x10
+
+/*
+ * 5212 4-word tx control descriptor
+ */
+struct ath5k_hw_4w_tx_desc {
+        u32     tx_control_0; /* TX control word 0 */
+
+#define AR5K_4W_TX_DESC_CTL0_FRAME_LEN          0x00000fff
+#define AR5K_4W_TX_DESC_CTL0_XMIT_POWER         0x003f0000
+#define AR5K_4W_TX_DESC_CTL0_XMIT_POWER_S       16
+#define AR5K_4W_TX_DESC_CTL0_RTSENA             0x00400000
+#define AR5K_4W_TX_DESC_CTL0_VEOL               0x00800000
+#define AR5K_4W_TX_DESC_CTL0_CLRDMASK           0x01000000
+#define AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT      0x1e000000
+#define AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT_S    25
+#define AR5K_4W_TX_DESC_CTL0_INTREQ             0x20000000
+#define AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID  0x40000000
+#define AR5K_4W_TX_DESC_CTL0_CTSENA             0x80000000
+
+        u32     tx_control_1; /* TX control word 1 */
+
+#define AR5K_4W_TX_DESC_CTL1_BUF_LEN            0x00000fff
+#define AR5K_4W_TX_DESC_CTL1_MORE               0x00001000
+#define AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX  0x000fe000
+#define AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S        13
+#define AR5K_4W_TX_DESC_CTL1_FRAME_TYPE         0x00f00000
+#define AR5K_4W_TX_DESC_CTL1_FRAME_TYPE_S       20
+#define AR5K_4W_TX_DESC_CTL1_NOACK              0x01000000
+#define AR5K_4W_TX_DESC_CTL1_COMP_PROC          0x06000000
+#define AR5K_4W_TX_DESC_CTL1_COMP_PROC_S        25
+#define AR5K_4W_TX_DESC_CTL1_COMP_IV_LEN        0x18000000
+#define AR5K_4W_TX_DESC_CTL1_COMP_IV_LEN_S      27
+#define AR5K_4W_TX_DESC_CTL1_COMP_ICV_LEN       0x60000000
+#define AR5K_4W_TX_DESC_CTL1_COMP_ICV_LEN_S     29
+
+        u32     tx_control_2; /* TX control word 2 */
+
+#define AR5K_4W_TX_DESC_CTL2_RTS_DURATION               0x00007fff
+#define AR5K_4W_TX_DESC_CTL2_DURATION_UPDATE_ENABLE     0x00008000
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0                0x000f0000
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0_S              16
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1                0x00f00000
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1_S              20
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2                0x0f000000
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2_S              24
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3                0xf0000000
+#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3_S              28
+
+        u32     tx_control_3; /* TX control word 3 */
+
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE0         0x0000001f
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE1         0x000003e0
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE1_S       5
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE2         0x00007c00
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE2_S       10
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE3         0x000f8000
+#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE3_S       15
+#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE       0x01f00000
+#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE_S     20
+} __packed;
+
+/*
+ * Common tx status descriptor
+ */
+struct ath5k_hw_tx_status {
+        u32     tx_status_0; /* TX status word 0 */
+
+#define AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK      0x00000001
+#define AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES  0x00000002
+#define AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN      0x00000004
+#define AR5K_DESC_TX_STATUS0_FILTERED           0x00000008
+/*???
+#define AR5K_DESC_TX_STATUS0_RTS_FAIL_COUNT     0x000000f0
+#define AR5K_DESC_TX_STATUS0_RTS_FAIL_COUNT_S   4
+*/
+#define AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT  0x000000f0
+#define AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT_S        4
+/*???
+#define AR5K_DESC_TX_STATUS0_DATA_FAIL_COUNT    0x00000f00
+#define AR5K_DESC_TX_STATUS0_DATA_FAIL_COUNT_S  8
+*/
+#define AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT   0x00000f00
+#define AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT_S 8
+#define AR5K_DESC_TX_STATUS0_VIRT_COLL_COUNT    0x0000f000
+#define AR5K_DESC_TX_STATUS0_VIRT_COLL_COUNT_S  12
+#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP     0xffff0000
+#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP_S   16
+
+        u32     tx_status_1; /* TX status word 1 */
+
+#define AR5K_DESC_TX_STATUS1_DONE               0x00000001
+#define AR5K_DESC_TX_STATUS1_SEQ_NUM            0x00001ffe
+#define AR5K_DESC_TX_STATUS1_SEQ_NUM_S          1
+#define AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH   0x001fe000
+#define AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH_S 13
+#define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX     0x00600000
+#define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX_S   21
+#define AR5K_DESC_TX_STATUS1_COMP_SUCCESS       0x00800000
+#define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA       0x01000000
+} __packed;
+
+
+/*
+ * AR5K REGISTER ACCESS
+ */
+
+/*Swap RX/TX Descriptor for big endian archs*/
+#if defined(__BIG_ENDIAN)
+#define AR5K_INIT_CFG   (               \
+        AR5K_CFG_SWTD | AR5K_CFG_SWRD   \
+)
+#else
+#define AR5K_INIT_CFG   0x00000000
+#endif
+
+/*#define AR5K_REG_READ(_reg)   ath5k_hw_reg_read(ah, _reg)
+
+#define AR5K_REG_WRITE(_reg, _val)      ath5k_hw_reg_write(ah, _val, _reg)*/
+
+#define AR5K_REG_SM(_val, _flags)                                       \
+        (((_val) << _flags##_S) & (_flags))
+
+#define AR5K_REG_MS(_val, _flags)                                       \
+        (((_val) & (_flags)) >> _flags##_S)
+
+/* Some registers can hold multiple values of interest. For this
+ * reason when we want to write to these registers we must first
+ * retrieve the values which we do not want to clear (lets call this
+ * old_data) and then set the register with this and our new_value:
+ * ( old_data | new_value) */
+#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val)                     \
+        ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
+            (((_val) << _flags##_S) & (_flags)), _reg)
+
+#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask)                   \
+        ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) &           \
+                        (_mask)) | (_flags), _reg)
+
+#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags)                          \
+        ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
+
+#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags)                 \
+        ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
+
+#define AR5K_PHY_WRITE(ah, _reg, _val)                                  \
+        ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2))
+
+#define AR5K_PHY_READ(ah, _reg)                                 \
+        ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2))
+
+#define AR5K_REG_WAIT(_i) do {                                          \
+        if (_i % 64)                                                    \
+                udelay(1);                                              \
+} while (0)
+
+#define AR5K_EEPROM_READ(_o, _v) do {                                   \
+        if ((ret = ath5k_hw_eeprom_read(ah, (_o), &(_v))) != 0) \
+                return (ret);                                           \
+} while (0)
+
+#define AR5K_EEPROM_READ_HDR(_o, _v)                                    \
+        AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v);        \
+
+/* Read status of selected queue */
+#define AR5K_REG_READ_Q(ah, _reg, _queue)                               \
+        (ath5k_hw_reg_read(ah, _reg) & (1 << _queue))                   \
+
+#define AR5K_REG_WRITE_Q(ah, _reg, _queue)                              \
+        ath5k_hw_reg_write(ah, (1 << _queue), _reg)
+
+#define AR5K_Q_ENABLE_BITS(_reg, _queue) do {                           \
+        _reg |= 1 << _queue;                                            \
+} while (0)
+
+#define AR5K_Q_DISABLE_BITS(_reg, _queue) do {                          \
+        _reg &= ~(1 << _queue);                                         \
+} while (0)
+
+#define AR5K_LOW_ID(_a)(                                \
+(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24  \
+)
+
+#define AR5K_HIGH_ID(_a)        ((_a)[4] | (_a)[5] << 8)
+
+/*
+ * Initial register values
+ */
+
+/*
+ * Common initial register values
+ */
+#define AR5K_INIT_MODE                          CHANNEL_B
+
+#define AR5K_INIT_TX_LATENCY                    502
+#define AR5K_INIT_USEC                          39
+#define AR5K_INIT_USEC_TURBO                    79
+#define AR5K_INIT_USEC_32                       31
+#define AR5K_INIT_CARR_SENSE_EN                 1
+#define AR5K_INIT_PROG_IFS                      920
+#define AR5K_INIT_PROG_IFS_TURBO                960
+#define AR5K_INIT_EIFS                          3440
+#define AR5K_INIT_EIFS_TURBO                    6880
+#define AR5K_INIT_SLOT_TIME                     396
+#define AR5K_INIT_SLOT_TIME_TURBO               480
+#define AR5K_INIT_ACK_CTS_TIMEOUT               1024
+#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO         0x08000800
+#define AR5K_INIT_SIFS                          560
+#define AR5K_INIT_SIFS_TURBO                    480
+#define AR5K_INIT_SH_RETRY                      10
+#define AR5K_INIT_LG_RETRY                      AR5K_INIT_SH_RETRY
+#define AR5K_INIT_SSH_RETRY                     32
+#define AR5K_INIT_SLG_RETRY                     AR5K_INIT_SSH_RETRY
+#define AR5K_INIT_TX_RETRY                      10
+#define AR5K_INIT_TOPS                          8
+#define AR5K_INIT_RXNOFRM                       8
+#define AR5K_INIT_RPGTO                         0
+#define AR5K_INIT_TXNOFRM                       0
+#define AR5K_INIT_BEACON_PERIOD                 65535
+#define AR5K_INIT_TIM_OFFSET                    0
+#define AR5K_INIT_BEACON_EN                     0
+#define AR5K_INIT_RESET_TSF                     0
+
+#define AR5K_INIT_TRANSMIT_LATENCY              (                       \
+        (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |       \
+        (AR5K_INIT_USEC)                                                \
+)
+#define AR5K_INIT_TRANSMIT_LATENCY_TURBO        (                       \
+        (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |       \
+        (AR5K_INIT_USEC_TURBO)                                          \
+)
+#define AR5K_INIT_PROTO_TIME_CNTRL              (                       \
+        (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) |      \
+        (AR5K_INIT_PROG_IFS)                                            \
+)
+#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO        (                       \
+        (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
+        (AR5K_INIT_PROG_IFS_TURBO)                                      \
+)
+#define AR5K_INIT_BEACON_CONTROL                (                       \
+        (AR5K_INIT_RESET_TSF << 24) | (AR5K_INIT_BEACON_EN << 23) |     \
+        (AR5K_INIT_TIM_OFFSET << 16) | (AR5K_INIT_BEACON_PERIOD)        \
+)
+
+/*
+ * Non-common initial register values which have to be loaded into the
+ * card at boot time and after each reset.
+ */
+
+/* Register dumps are done per operation mode */
+#define AR5K_INI_RFGAIN_5GHZ            0
+#define AR5K_INI_RFGAIN_2GHZ            1
+
+#define AR5K_INI_VAL_11A                0
+#define AR5K_INI_VAL_11A_TURBO          1
+#define AR5K_INI_VAL_11B                2
+#define AR5K_INI_VAL_11G                3
+#define AR5K_INI_VAL_11G_TURBO          4
+#define AR5K_INI_VAL_XR                 0
+#define AR5K_INI_VAL_MAX                5
+
+#define AR5K_RF5111_INI_RF_MAX_BANKS    AR5K_MAX_RF_BANKS
+#define AR5K_RF5112_INI_RF_MAX_BANKS    AR5K_MAX_RF_BANKS
+
+static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
+{
+        u32 retval = 0, bit, i;
+
+        for (i = 0; i < bits; i++) {
+                bit = (val >> i) & 1;
+                retval = (retval << 1) | bit;
+        }
+
+        return retval;
+}
diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c
new file mode 100644
index 000000000000..2c22f1d4ee64
--- /dev/null
+++ b/drivers/net/wireless/ath5k/initvals.c
@@ -0,0 +1,1347 @@
+/*
+ * Initial register settings functions
+ *
+ * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "ath5k.h"
+#include "base.h"
+#include "reg.h"
+
+/*
+ * MAC/PHY REGISTERS
+ */
+
+
+/*
+ * Mode-independent initial register writes
+ */
+
+struct ath5k_ini {
+        u16     ini_register;
+        u32     ini_value;
+
+        enum {
+                AR5K_INI_WRITE = 0,     /* Default */
+                AR5K_INI_READ = 1,      /* Cleared on read */
+        } ini_mode;
+};
+
+/*
+ * Mode specific initial register values
+ */
+
+struct ath5k_ini_mode {
+        u16     mode_register;
+        u32     mode_value[5];
+};
+
+/* Initial register settings for AR5210 */
+static const struct ath5k_ini ar5210_ini[] = {
+        /* PCU and MAC registers */
+        { AR5K_NOQCU_TXDP0,     0 },
+        { AR5K_NOQCU_TXDP1,     0 },
+        { AR5K_RXDP,            0 },
+        { AR5K_CR,              0 },
+        { AR5K_ISR,             0, AR5K_INI_READ },
+        { AR5K_IMR,             0 },
+        { AR5K_IER,             AR5K_IER_DISABLE },
+        { AR5K_BSR,             0, AR5K_INI_READ },
+        { AR5K_TXCFG,           AR5K_DMASIZE_128B },
+        { AR5K_RXCFG,           AR5K_DMASIZE_128B },
+        { AR5K_CFG,             AR5K_INIT_CFG },
+        { AR5K_TOPS,            AR5K_INIT_TOPS },
+        { AR5K_RXNOFRM,         AR5K_INIT_RXNOFRM },
+        { AR5K_RPGTO,           AR5K_INIT_RPGTO },
+        { AR5K_TXNOFRM,         AR5K_INIT_TXNOFRM },
+        { AR5K_SFR,             0 },
+        { AR5K_MIBC,            0 },
+        { AR5K_MISC,            0 },
+        { AR5K_RX_FILTER_5210,  0 },
+        { AR5K_MCAST_FILTER0_5210, 0 },
+        { AR5K_MCAST_FILTER1_5210, 0 },
+        { AR5K_TX_MASK0,        0 },
+        { AR5K_TX_MASK1,        0 },
+        { AR5K_CLR_TMASK,       0 },
+        { AR5K_TRIG_LVL,        AR5K_TUNE_MIN_TX_FIFO_THRES },
+        { AR5K_DIAG_SW_5210,    0 },
+        { AR5K_RSSI_THR,        AR5K_TUNE_RSSI_THRES },
+        { AR5K_TSF_L32_5210,    0 },
+        { AR5K_TIMER0_5210,     0 },
+        { AR5K_TIMER1_5210,     0xffffffff },
+        { AR5K_TIMER2_5210,     0xffffffff },
+        { AR5K_TIMER3_5210,     1 },
+        { AR5K_CFP_DUR_5210,    0 },
+        { AR5K_CFP_PERIOD_5210, 0 },
+        /* PHY registers */
+        { AR5K_PHY(0),  0x00000047 },
+        { AR5K_PHY_AGC, 0x00000000 },
+        { AR5K_PHY(3),  0x09848ea6 },
+        { AR5K_PHY(4),  0x3d32e000 },
+        { AR5K_PHY(5),  0x0000076b },
+        { AR5K_PHY_ACT, AR5K_PHY_ACT_DISABLE },
+        { AR5K_PHY(8),  0x02020200 },
+        { AR5K_PHY(9),  0x00000e0e },
+        { AR5K_PHY(10), 0x0a020201 },
+        { AR5K_PHY(11), 0x00036ffc },
+        { AR5K_PHY(12), 0x00000000 },
+        { AR5K_PHY(13), 0x00000e0e },
+        { AR5K_PHY(14), 0x00000007 },
+        { AR5K_PHY(15), 0x00020100 },
+        { AR5K_PHY(16), 0x89630000 },
+        { AR5K_PHY(17), 0x1372169c },
+        { AR5K_PHY(18), 0x0018b633 },
+        { AR5K_PHY(19), 0x1284613c },
+        { AR5K_PHY(20), 0x0de8b8e0 },
+        { AR5K_PHY(21), 0x00074859 },
+        { AR5K_PHY(22), 0x7e80beba },
+        { AR5K_PHY(23), 0x313a665e },
+        { AR5K_PHY_AGCCTL, 0x00001d08 },
+        { AR5K_PHY(25), 0x0001ce00 },
+        { AR5K_PHY(26), 0x409a4190 },
+        { AR5K_PHY(28), 0x0000000f },
+        { AR5K_PHY(29), 0x00000080 },
+        { AR5K_PHY(30), 0x00000004 },
+        { AR5K_PHY(31), 0x00000018 },   /* 0x987c */
+        { AR5K_PHY(64), 0x00000000 },   /* 0x9900 */
+        { AR5K_PHY(65), 0x00000000 },
+        { AR5K_PHY(66), 0x00000000 },
+        { AR5K_PHY(67), 0x00800000 },
+        { AR5K_PHY(68), 0x00000003 },
+        /* BB gain table (64bytes) */
+        { AR5K_BB_GAIN(0), 0x00000000 },
+        { AR5K_BB_GAIN(1), 0x00000020 },
+        { AR5K_BB_GAIN(2), 0x00000010 },
+        { AR5K_BB_GAIN(3), 0x00000030 },
+        { AR5K_BB_GAIN(4), 0x00000008 },
+        { AR5K_BB_GAIN(5), 0x00000028 },
+        { AR5K_BB_GAIN(6), 0x00000028 },
+        { AR5K_BB_GAIN(7), 0x00000004 },
+        { AR5K_BB_GAIN(8), 0x00000024 },
+        { AR5K_BB_GAIN(9), 0x00000014 },
+        { AR5K_BB_GAIN(10), 0x00000034 },
+        { AR5K_BB_GAIN(11), 0x0000000c },
+        { AR5K_BB_GAIN(12), 0x0000002c },
+        { AR5K_BB_GAIN(13), 0x00000002 },
+        { AR5K_BB_GAIN(14), 0x00000022 },
+        { AR5K_BB_GAIN(15), 0x00000012 },
+        { AR5K_BB_GAIN(16), 0x00000032 },
+        { AR5K_BB_GAIN(17), 0x0000000a },
+        { AR5K_BB_GAIN(18), 0x0000002a },
+        { AR5K_BB_GAIN(19), 0x00000001 },
+        { AR5K_BB_GAIN(20), 0x00000021 },
+        { AR5K_BB_GAIN(21), 0x00000011 },
+        { AR5K_BB_GAIN(22), 0x00000031 },
+        { AR5K_BB_GAIN(23), 0x00000009 },
+        { AR5K_BB_GAIN(24), 0x00000029 },
+        { AR5K_BB_GAIN(25), 0x00000005 },
+        { AR5K_BB_GAIN(26), 0x00000025 },
+        { AR5K_BB_GAIN(27), 0x00000015 },
+        { AR5K_BB_GAIN(28), 0x00000035 },
+        { AR5K_BB_GAIN(29), 0x0000000d },
+        { AR5K_BB_GAIN(30), 0x0000002d },
+        { AR5K_BB_GAIN(31), 0x00000003 },
+        { AR5K_BB_GAIN(32), 0x00000023 },
+        { AR5K_BB_GAIN(33), 0x00000013 },
+        { AR5K_BB_GAIN(34), 0x00000033 },
+        { AR5K_BB_GAIN(35), 0x0000000b },
+        { AR5K_BB_GAIN(36), 0x0000002b },
+        { AR5K_BB_GAIN(37), 0x00000007 },
+        { AR5K_BB_GAIN(38), 0x00000027 },
+        { AR5K_BB_GAIN(39), 0x00000017 },
+        { AR5K_BB_GAIN(40), 0x00000037 },
+        { AR5K_BB_GAIN(41), 0x0000000f },
+        { AR5K_BB_GAIN(42), 0x0000002f },
+        { AR5K_BB_GAIN(43), 0x0000002f },
+        { AR5K_BB_GAIN(44), 0x0000002f },
+        { AR5K_BB_GAIN(45), 0x0000002f },
+        { AR5K_BB_GAIN(46), 0x0000002f },
+        { AR5K_BB_GAIN(47), 0x0000002f },
+        { AR5K_BB_GAIN(48), 0x0000002f },
+        { AR5K_BB_GAIN(49), 0x0000002f },
+        { AR5K_BB_GAIN(50), 0x0000002f },
+        { AR5K_BB_GAIN(51), 0x0000002f },
+        { AR5K_BB_GAIN(52), 0x0000002f },
+        { AR5K_BB_GAIN(53), 0x0000002f },
+        { AR5K_BB_GAIN(54), 0x0000002f },
+        { AR5K_BB_GAIN(55), 0x0000002f },
+        { AR5K_BB_GAIN(56), 0x0000002f },
+        { AR5K_BB_GAIN(57), 0x0000002f },
+        { AR5K_BB_GAIN(58), 0x0000002f },
+        { AR5K_BB_GAIN(59), 0x0000002f },
+        { AR5K_BB_GAIN(60), 0x0000002f },
+        { AR5K_BB_GAIN(61), 0x0000002f },
+        { AR5K_BB_GAIN(62), 0x0000002f },
+        { AR5K_BB_GAIN(63), 0x0000002f },
+        /* 5110 RF gain table (64btes) */
+        { AR5K_RF_GAIN(0), 0x0000001d },
+        { AR5K_RF_GAIN(1), 0x0000005d },
+        { AR5K_RF_GAIN(2), 0x0000009d },
+        { AR5K_RF_GAIN(3), 0x000000dd },
+        { AR5K_RF_GAIN(4), 0x0000011d },
+        { AR5K_RF_GAIN(5), 0x00000021 },
+        { AR5K_RF_GAIN(6), 0x00000061 },
+        { AR5K_RF_GAIN(7), 0x000000a1 },
+        { AR5K_RF_GAIN(8), 0x000000e1 },
+        { AR5K_RF_GAIN(9), 0x00000031 },
+        { AR5K_RF_GAIN(10), 0x00000071 },
+        { AR5K_RF_GAIN(11), 0x000000b1 },
+        { AR5K_RF_GAIN(12), 0x0000001c },
+        { AR5K_RF_GAIN(13), 0x0000005c },
+        { AR5K_RF_GAIN(14), 0x00000029 },
+        { AR5K_RF_GAIN(15), 0x00000069 },
+        { AR5K_RF_GAIN(16), 0x000000a9 },
+        { AR5K_RF_GAIN(17), 0x00000020 },
+        { AR5K_RF_GAIN(18), 0x00000019 },
+        { AR5K_RF_GAIN(19), 0x00000059 },
+        { AR5K_RF_GAIN(20), 0x00000099 },
+        { AR5K_RF_GAIN(21), 0x00000030 },
+        { AR5K_RF_GAIN(22), 0x00000005 },
+        { AR5K_RF_GAIN(23), 0x00000025 },
+        { AR5K_RF_GAIN(24), 0x00000065 },
+        { AR5K_RF_GAIN(25), 0x000000a5 },
+        { AR5K_RF_GAIN(26), 0x00000028 },
+        { AR5K_RF_GAIN(27), 0x00000068 },
+        { AR5K_RF_GAIN(28), 0x0000001f },
+        { AR5K_RF_GAIN(29), 0x0000001e },
+        { AR5K_RF_GAIN(30), 0x00000018 },
+        { AR5K_RF_GAIN(31), 0x00000058 },
+        { AR5K_RF_GAIN(32), 0x00000098 },
+        { AR5K_RF_GAIN(33), 0x00000003 },
+        { AR5K_RF_GAIN(34), 0x00000004 },
+        { AR5K_RF_GAIN(35), 0x00000044 },
+        { AR5K_RF_GAIN(36), 0x00000084 },
+        { AR5K_RF_GAIN(37), 0x00000013 },
+        { AR5K_RF_GAIN(38), 0x00000012 },
+        { AR5K_RF_GAIN(39), 0x00000052 },
+        { AR5K_RF_GAIN(40), 0x00000092 },
+        { AR5K_RF_GAIN(41), 0x000000d2 },
+        { AR5K_RF_GAIN(42), 0x0000002b },
+        { AR5K_RF_GAIN(43), 0x0000002a },
+        { AR5K_RF_GAIN(44), 0x0000006a },
+        { AR5K_RF_GAIN(45), 0x000000aa },
+        { AR5K_RF_GAIN(46), 0x0000001b },
+        { AR5K_RF_GAIN(47), 0x0000001a },
+        { AR5K_RF_GAIN(48), 0x0000005a },
+        { AR5K_RF_GAIN(49), 0x0000009a },
+        { AR5K_RF_GAIN(50), 0x000000da },
+        { AR5K_RF_GAIN(51), 0x00000006 },
+        { AR5K_RF_GAIN(52), 0x00000006 },
+        { AR5K_RF_GAIN(53), 0x00000006 },
+        { AR5K_RF_GAIN(54), 0x00000006 },
+        { AR5K_RF_GAIN(55), 0x00000006 },
+        { AR5K_RF_GAIN(56), 0x00000006 },
+        { AR5K_RF_GAIN(57), 0x00000006 },
+        { AR5K_RF_GAIN(58), 0x00000006 },
+        { AR5K_RF_GAIN(59), 0x00000006 },
+        { AR5K_RF_GAIN(60), 0x00000006 },
+        { AR5K_RF_GAIN(61), 0x00000006 },
+        { AR5K_RF_GAIN(62), 0x00000006 },
+        { AR5K_RF_GAIN(63), 0x00000006 },
+        /* PHY activation */
+        { AR5K_PHY(53), 0x00000020 },
+        { AR5K_PHY(51), 0x00000004 },
+        { AR5K_PHY(50), 0x00060106 },
+        { AR5K_PHY(39), 0x0000006d },
+        { AR5K_PHY(48), 0x00000000 },
+        { AR5K_PHY(52), 0x00000014 },
+        { AR5K_PHY_ACT, AR5K_PHY_ACT_ENABLE },
+};
+
+/* Initial register settings for AR5211 */
+static const struct ath5k_ini ar5211_ini[] = {
+        { AR5K_RXDP,            0x00000000 },
+        { AR5K_RTSD0,           0x84849c9c },
+        { AR5K_RTSD1,           0x7c7c7c7c },
+        { AR5K_RXCFG,           0x00000005 },
+        { AR5K_MIBC,            0x00000000 },
+        { AR5K_TOPS,            0x00000008 },
+        { AR5K_RXNOFRM,         0x00000008 },
+        { AR5K_TXNOFRM,         0x00000010 },
+        { AR5K_RPGTO,           0x00000000 },
+        { AR5K_RFCNT,           0x0000001f },
+        { AR5K_QUEUE_TXDP(0),   0x00000000 },
+        { AR5K_QUEUE_TXDP(1),   0x00000000 },
+        { AR5K_QUEUE_TXDP(2),   0x00000000 },
+        { AR5K_QUEUE_TXDP(3),   0x00000000 },
+        { AR5K_QUEUE_TXDP(4),   0x00000000 },
+        { AR5K_QUEUE_TXDP(5),   0x00000000 },
+        { AR5K_QUEUE_TXDP(6),   0x00000000 },
+        { AR5K_QUEUE_TXDP(7),   0x00000000 },
+        { AR5K_QUEUE_TXDP(8),   0x00000000 },
+        { AR5K_QUEUE_TXDP(9),   0x00000000 },
+        { AR5K_DCU_FP,          0x00000000 },
+        { AR5K_STA_ID1,         0x00000000 },
+        { AR5K_BSS_ID0,         0x00000000 },
+        { AR5K_BSS_ID1,         0x00000000 },
+        { AR5K_RSSI_THR,        0x00000000 },
+        { AR5K_CFP_PERIOD_5211, 0x00000000 },
+        { AR5K_TIMER0_5211,     0x00000030 },
+        { AR5K_TIMER1_5211,     0x0007ffff },
+        { AR5K_TIMER2_5211,     0x01ffffff },
+        { AR5K_TIMER3_5211,     0x00000031 },
+        { AR5K_CFP_DUR_5211,    0x00000000 },
+        { AR5K_RX_FILTER_5211,  0x00000000 },
+        { AR5K_MCAST_FILTER0_5211, 0x00000000 },
+        { AR5K_MCAST_FILTER1_5211, 0x00000002 },
+        { AR5K_DIAG_SW_5211,    0x00000000 },
+        { AR5K_ADDAC_TEST,      0x00000000 },
+        { AR5K_DEFAULT_ANTENNA, 0x00000000 },
+        /* PHY registers */
+        { AR5K_PHY_AGC, 0x00000000 },
+        { AR5K_PHY(3),  0x2d849093 },
+        { AR5K_PHY(4),  0x7d32e000 },
+        { AR5K_PHY(5),  0x00000f6b },
+        { AR5K_PHY_ACT, 0x00000000 },
+        { AR5K_PHY(11), 0x00026ffe },
+        { AR5K_PHY(12), 0x00000000 },
+        { AR5K_PHY(15), 0x00020100 },
+        { AR5K_PHY(16), 0x206a017a },
+        { AR5K_PHY(19), 0x1284613c },
+        { AR5K_PHY(21), 0x00000859 },
+        { AR5K_PHY(26), 0x409a4190 },   /* 0x9868 */
+        { AR5K_PHY(27), 0x050cb081 },
+        { AR5K_PHY(28), 0x0000000f },
+        { AR5K_PHY(29), 0x00000080 },
+        { AR5K_PHY(30), 0x0000000c },
+        { AR5K_PHY(64), 0x00000000 },
+        { AR5K_PHY(65), 0x00000000 },
+        { AR5K_PHY(66), 0x00000000 },
+        { AR5K_PHY(67), 0x00800000 },
+        { AR5K_PHY(68), 0x00000001 },
+        { AR5K_PHY(71), 0x0000092a },
+        { AR5K_PHY_IQ,  0x00000000 },
+        { AR5K_PHY(73), 0x00058a05 },
+        { AR5K_PHY(74), 0x00000001 },
+        { AR5K_PHY(75), 0x00000000 },
+        { AR5K_PHY_PAPD_PROBE, 0x00000000 },
+        { AR5K_PHY(77), 0x00000000 },   /* 0x9934 */
+        { AR5K_PHY(78), 0x00000000 },   /* 0x9938 */
+        { AR5K_PHY(79), 0x0000003f },   /* 0x993c */
+        { AR5K_PHY(80), 0x00000004 },
+        { AR5K_PHY(82), 0x00000000 },
+        { AR5K_PHY(83), 0x00000000 },
+        { AR5K_PHY(84), 0x00000000 },
+        { AR5K_PHY_RADAR, 0x5d50f14c },
+        { AR5K_PHY(86), 0x00000018 },
+        { AR5K_PHY(87), 0x004b6a8e },
+        /* Initial Power table (32bytes)
+         * common on all cards/modes.
+         * Note: Table is rewritten during
+         * txpower setup later using calibration
+         * data etc. so next write is non-common
+        { AR5K_PHY_PCDAC_TXPOWER(1), 0x06ff05ff },
+        { AR5K_PHY_PCDAC_TXPOWER(2), 0x07ff07ff },
+        { AR5K_PHY_PCDAC_TXPOWER(3), 0x08ff08ff },
+        { AR5K_PHY_PCDAC_TXPOWER(4), 0x09ff09ff },
+        { AR5K_PHY_PCDAC_TXPOWER(5), 0x0aff0aff },
+        { AR5K_PHY_PCDAC_TXPOWER(6), 0x0bff0bff },
+        { AR5K_PHY_PCDAC_TXPOWER(7), 0x0cff0cff },
+        { AR5K_PHY_PCDAC_TXPOWER(8), 0x0dff0dff },
+        { AR5K_PHY_PCDAC_TXPOWER(9), 0x0fff0eff },
+        { AR5K_PHY_PCDAC_TXPOWER(10), 0x12ff12ff },
+        { AR5K_PHY_PCDAC_TXPOWER(11), 0x14ff13ff },
+        { AR5K_PHY_PCDAC_TXPOWER(12), 0x16ff15ff },
+        { AR5K_PHY_PCDAC_TXPOWER(13), 0x19ff17ff },
+        { AR5K_PHY_PCDAC_TXPOWER(14), 0x1bff1aff },
+        { AR5K_PHY_PCDAC_TXPOWER(15), 0x1eff1dff },
+        { AR5K_PHY_PCDAC_TXPOWER(16), 0x23ff20ff },
+        { AR5K_PHY_PCDAC_TXPOWER(17), 0x27ff25ff },
+        { AR5K_PHY_PCDAC_TXPOWER(18), 0x2cff29ff },
+        { AR5K_PHY_PCDAC_TXPOWER(19), 0x31ff2fff },
+        { AR5K_PHY_PCDAC_TXPOWER(20), 0x37ff34ff },
+        { AR5K_PHY_PCDAC_TXPOWER(21), 0x3aff3aff },
+        { AR5K_PHY_PCDAC_TXPOWER(22), 0x3aff3aff },
+        { AR5K_PHY_PCDAC_TXPOWER(23), 0x3aff3aff },
+        { AR5K_PHY_PCDAC_TXPOWER(24), 0x3aff3aff },
+        { AR5K_PHY_PCDAC_TXPOWER(25), 0x3aff3aff },
+        { AR5K_PHY_PCDAC_TXPOWER(26), 0x3aff3aff },
+        { AR5K_PHY_PCDAC_TXPOWER(27), 0x3aff3aff },
+        { AR5K_PHY_PCDAC_TXPOWER(28), 0x3aff3aff },
+        { AR5K_PHY_PCDAC_TXPOWER(29), 0x3aff3aff },
+        { AR5K_PHY_PCDAC_TXPOWER(30), 0x3aff3aff },
+        { AR5K_PHY_PCDAC_TXPOWER(31), 0x3aff3aff },*/
+        { AR5K_PHY_CCKTXCTL, 0x00000000 },
+        { AR5K_PHY(642), 0x503e4646 },
+        { AR5K_PHY_GAIN_2GHZ, 0x6480416c },
+        { AR5K_PHY(644), 0x0199a003 },
+        { AR5K_PHY(645), 0x044cd610 },
+        { AR5K_PHY(646), 0x13800040 },
+        { AR5K_PHY(647), 0x1be00060 },
+        { AR5K_PHY(648), 0x0c53800a },
+        { AR5K_PHY(649), 0x0014df3b },
+        { AR5K_PHY(650), 0x000001b5 },
+        { AR5K_PHY(651), 0x00000020 },
+};
+
+/* Initial mode-specific settings for AR5211
+ * XXX: how about g / gTurbo ? RF5111 supports it, how about AR5211 ?
+ * Maybe 5211 supports OFDM-only g but we need to test it !
+ */
+static const struct ath5k_ini_mode ar5211_ini_mode[] = {
+        { AR5K_TXCFG,
+        /*        a           aTurbo      b             */
+                { 0x00000015, 0x00000015, 0x0000001d } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(0),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(1),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(2),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(3),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(4),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(5),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(6),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(7),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(8),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(9),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } },
+        { AR5K_DCU_GBL_IFS_SLOT,
+                { 0x00000168, 0x000001e0, 0x000001b8 } },
+        { AR5K_DCU_GBL_IFS_SIFS,
+                { 0x00000230, 0x000001e0, 0x000000b0 } },
+        { AR5K_DCU_GBL_IFS_EIFS,
+                { 0x00000d98, 0x00001180, 0x00001f48 } },
+        { AR5K_DCU_GBL_IFS_MISC,
+                { 0x0000a0e0, 0x00014068, 0x00005880 } },
+        { AR5K_TIME_OUT,
+                { 0x04000400, 0x08000800, 0x20003000 } },
+        { AR5K_USEC_5211,
+                { 0x0e8d8fa7, 0x0e8d8fcf, 0x01608f95 } },
+        { AR5K_PHY_TURBO,
+                { 0x00000000, 0x00000003, 0x00000000 } },
+        { AR5K_PHY(8),
+                { 0x02020200, 0x02020200, 0x02010200 } },
+        { AR5K_PHY(9),
+                { 0x00000e0e, 0x00000e0e, 0x00000707 } },
+        { AR5K_PHY(10),
+                { 0x0a020001, 0x0a020001, 0x05010000 } },
+        { AR5K_PHY(13),
+                { 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+        { AR5K_PHY(14),
+                { 0x00000007, 0x00000007, 0x0000000b } },
+        { AR5K_PHY(17),
+                { 0x1372169c, 0x137216a5, 0x137216a8 } },
+        { AR5K_PHY(18),
+                { 0x0018ba67, 0x0018ba67, 0x0018ba69 } },
+        { AR5K_PHY(20),
+                { 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0 } },
+        { AR5K_PHY_SIG,
+                { 0x7e800d2e, 0x7e800d2e, 0x7ec00d2e } },
+        { AR5K_PHY_AGCCOARSE,
+                { 0x31375d5e, 0x31375d5e, 0x313a5d5e } },
+        { AR5K_PHY_AGCCTL,
+                { 0x0000bd10, 0x0000bd10, 0x0000bd38 } },
+        { AR5K_PHY_NF,
+                { 0x0001ce00, 0x0001ce00, 0x0001ce00 } },
+        { AR5K_PHY_RX_DELAY,
+                { 0x00002710, 0x00002710, 0x0000157c } },
+        { AR5K_PHY(70),
+                { 0x00000190, 0x00000190, 0x00000084 } },
+        { AR5K_PHY_FRAME_CTL_5211,
+                { 0x6fe01020, 0x6fe01020, 0x6fe00920 } },
+        { AR5K_PHY_PCDAC_TXPOWER_BASE_5211,
+                { 0x05ff14ff, 0x05ff14ff, 0x05ff14ff } },
+        { AR5K_RF_BUFFER_CONTROL_4,
+                { 0x00000010, 0x00000014, 0x00000010 } },
+};
+
+/* Initial register settings for AR5212 */
+static const struct ath5k_ini ar5212_ini[] = {
+        { AR5K_RXDP,            0x00000000 },
+        { AR5K_RXCFG,           0x00000005 },
+        { AR5K_MIBC,            0x00000000 },
+        { AR5K_TOPS,            0x00000008 },
+        { AR5K_RXNOFRM,         0x00000008 },
+        { AR5K_TXNOFRM,         0x00000010 },
+        { AR5K_RPGTO,           0x00000000 },
+        { AR5K_RFCNT,           0x0000001f },
+        { AR5K_QUEUE_TXDP(0),   0x00000000 },
+        { AR5K_QUEUE_TXDP(1),   0x00000000 },
+        { AR5K_QUEUE_TXDP(2),   0x00000000 },
+        { AR5K_QUEUE_TXDP(3),   0x00000000 },
+        { AR5K_QUEUE_TXDP(4),   0x00000000 },
+        { AR5K_QUEUE_TXDP(5),   0x00000000 },
+        { AR5K_QUEUE_TXDP(6),   0x00000000 },
+        { AR5K_QUEUE_TXDP(7),   0x00000000 },
+        { AR5K_QUEUE_TXDP(8),   0x00000000 },
+        { AR5K_QUEUE_TXDP(9),   0x00000000 },
+        { AR5K_DCU_FP,          0x00000000 },
+        { AR5K_DCU_TXP,         0x00000000 },
+        { AR5K_DCU_TX_FILTER,   0x00000000 },
+        /* Unknown table */
+        { 0x1078, 0x00000000 },
+        { 0x10b8, 0x00000000 },
+        { 0x10f8, 0x00000000 },
+        { 0x1138, 0x00000000 },
+        { 0x1178, 0x00000000 },
+        { 0x11b8, 0x00000000 },
+        { 0x11f8, 0x00000000 },
+        { 0x1238, 0x00000000 },
+        { 0x1278, 0x00000000 },
+        { 0x12b8, 0x00000000 },
+        { 0x12f8, 0x00000000 },
+        { 0x1338, 0x00000000 },
+        { 0x1378, 0x00000000 },
+        { 0x13b8, 0x00000000 },
+        { 0x13f8, 0x00000000 },
+        { 0x1438, 0x00000000 },
+        { 0x1478, 0x00000000 },
+        { 0x14b8, 0x00000000 },
+        { 0x14f8, 0x00000000 },
+        { 0x1538, 0x00000000 },
+        { 0x1578, 0x00000000 },
+        { 0x15b8, 0x00000000 },
+        { 0x15f8, 0x00000000 },
+        { 0x1638, 0x00000000 },
+        { 0x1678, 0x00000000 },
+        { 0x16b8, 0x00000000 },
+        { 0x16f8, 0x00000000 },
+        { 0x1738, 0x00000000 },
+        { 0x1778, 0x00000000 },
+        { 0x17b8, 0x00000000 },
+        { 0x17f8, 0x00000000 },
+        { 0x103c, 0x00000000 },
+        { 0x107c, 0x00000000 },
+        { 0x10bc, 0x00000000 },
+        { 0x10fc, 0x00000000 },
+        { 0x113c, 0x00000000 },
+        { 0x117c, 0x00000000 },
+        { 0x11bc, 0x00000000 },
+        { 0x11fc, 0x00000000 },
+        { 0x123c, 0x00000000 },
+        { 0x127c, 0x00000000 },
+        { 0x12bc, 0x00000000 },
+        { 0x12fc, 0x00000000 },
+        { 0x133c, 0x00000000 },
+        { 0x137c, 0x00000000 },
+        { 0x13bc, 0x00000000 },
+        { 0x13fc, 0x00000000 },
+        { 0x143c, 0x00000000 },
+        { 0x147c, 0x00000000 },
+        { AR5K_DCU_TX_FILTER_CLR, 0x00000000 },
+        { AR5K_DCU_TX_FILTER_SET, 0x00000000 },
+        { AR5K_STA_ID1,         0x00000000 },
+        { AR5K_BSS_ID0,         0x00000000 },
+        { AR5K_BSS_ID1,         0x00000000 },
+        /*{ AR5K_RSSI_THR,      0x00000000 },*/ /* Found on SuperAG cards */
+        { AR5K_BEACON_5211,     0x00000000 },   /* Found on SuperAG cards */
+        { AR5K_CFP_PERIOD_5211, 0x00000000 },   /* Found on SuperAG cards */
+        { AR5K_TIMER0_5211,     0x00000030 },   /* Found on SuperAG cards */
+        { AR5K_TIMER1_5211,     0x0007ffff },   /* Found on SuperAG cards */
+        { AR5K_TIMER2_5211,     0x01ffffff },   /* Found on SuperAG cards */
+        { AR5K_TIMER3_5211,     0x00000031 },   /* Found on SuperAG cards */
+        { AR5K_CFP_DUR_5211,    0x00000000 },   /* Found on SuperAG cards */
+        { AR5K_RX_FILTER_5211,  0x00000000 },
+        { AR5K_DIAG_SW_5211,    0x00000000 },
+        { AR5K_ADDAC_TEST,      0x00000000 },
+        { AR5K_DEFAULT_ANTENNA, 0x00000000 },
+        { 0x8080, 0x00000000 },
+        /*{ 0x805c, 0xffffc7ff },*/ /* Old value */
+        { 0x805c, 0x000fc78f },
+        { AR5K_NAV_5211,        0x00000000 },   /* Not found on recent */
+        { AR5K_RTS_OK_5211,     0x00000000 },   /* dumps but it makes  */
+        { AR5K_RTS_FAIL_5211,   0x00000000 },   /* sense to reset counters */
+        { AR5K_ACK_FAIL_5211,   0x00000000 },   /* since pcu registers */
+        { AR5K_FCS_FAIL_5211,   0x00000000 },   /* are skiped during chan*/
+        { AR5K_BEACON_CNT_5211, 0x00000000 },   /* change */
+        { AR5K_XRMODE,          0x2a82301a },
+        { AR5K_XRDELAY,         0x05dc01e0 },
+        { AR5K_XRTIMEOUT,       0x1f402710 },
+        { AR5K_XRCHIRP,         0x01f40000 },
+        { AR5K_XRSTOMP,         0x00001e1c },
+        { AR5K_SLEEP0,          0x0002aaaa },   /* Found on SuperAG cards */
+        { AR5K_SLEEP1,          0x02005555 },   /* Found on SuperAG cards */
+        { AR5K_SLEEP2,          0x00000000 },   /* Found on SuperAG cards */
+        { AR5K_BSS_IDM0,        0xffffffff },
+        { AR5K_BSS_IDM1,        0x0000ffff },
+        { AR5K_TXPC,            0x00000000 },
+        { AR5K_PROFCNT_TX,      0x00000000 },
+        { AR5K_PROFCNT_RX,      0x00000000 },
+        { AR5K_PROFCNT_RXCLR,   0x00000000 },
+        { AR5K_PROFCNT_CYCLE,   0x00000000 },
+        { 0x80fc, 0x00000088 },
+        { AR5K_RATE_DUR(0),     0x00000000 },
+        { AR5K_RATE_DUR(1),     0x0000008c },
+        { AR5K_RATE_DUR(2),     0x000000e4 },
+        { AR5K_RATE_DUR(3),     0x000002d5 },
+        { AR5K_RATE_DUR(4),     0x00000000 },
+        { AR5K_RATE_DUR(5),     0x00000000 },
+        { AR5K_RATE_DUR(6),     0x000000a0 },
+        { AR5K_RATE_DUR(7),     0x000001c9 },
+        { AR5K_RATE_DUR(8),     0x0000002c },
+        { AR5K_RATE_DUR(9),     0x0000002c },
+        { AR5K_RATE_DUR(10),    0x00000030 },
+        { AR5K_RATE_DUR(11),    0x0000003c },
+        { AR5K_RATE_DUR(12),    0x0000002c },
+        { AR5K_RATE_DUR(13),    0x0000002c },
+        { AR5K_RATE_DUR(14),    0x00000030 },
+        { AR5K_RATE_DUR(15),    0x0000003c },
+        { AR5K_RATE_DUR(16),    0x00000000 },
+        { AR5K_RATE_DUR(17),    0x00000000 },
+        { AR5K_RATE_DUR(18),    0x00000000 },
+        { AR5K_RATE_DUR(19),    0x00000000 },
+        { AR5K_RATE_DUR(20),    0x00000000 },
+        { AR5K_RATE_DUR(21),    0x00000000 },
+        { AR5K_RATE_DUR(22),    0x00000000 },
+        { AR5K_RATE_DUR(23),    0x00000000 },
+        { AR5K_RATE_DUR(24),    0x000000d5 },
+        { AR5K_RATE_DUR(25),    0x000000df },
+        { AR5K_RATE_DUR(26),    0x00000102 },
+        { AR5K_RATE_DUR(27),    0x0000013a },
+        { AR5K_RATE_DUR(28),    0x00000075 },
+        { AR5K_RATE_DUR(29),    0x0000007f },
+        { AR5K_RATE_DUR(30),    0x000000a2 },
+        { AR5K_RATE_DUR(31),    0x00000000 },
+        { 0x8100, 0x00010002},
+        { AR5K_TSF_PARM,        0x00000001 },
+        { 0x8108, 0x000000c0 },
+        { AR5K_PHY_ERR_FIL,     0x00000000 },
+        { 0x8110, 0x00000168 },
+        { 0x8114, 0x00000000 },
+        /* Some kind of table
+         * also notice ...03<-02<-01<-00) */
+        { 0x87c0, 0x03020100 },
+        { 0x87c4, 0x07060504 },
+        { 0x87c8, 0x0b0a0908 },
+        { 0x87cc, 0x0f0e0d0c },
+        { 0x87d0, 0x13121110 },
+        { 0x87d4, 0x17161514 },
+        { 0x87d8, 0x1b1a1918 },
+        { 0x87dc, 0x1f1e1d1c },
+        /* loop ? */
+        { 0x87e0, 0x03020100 },
+        { 0x87e4, 0x07060504 },
+        { 0x87e8, 0x0b0a0908 },
+        { 0x87ec, 0x0f0e0d0c },
+        { 0x87f0, 0x13121110 },
+        { 0x87f4, 0x17161514 },
+        { 0x87f8, 0x1b1a1918 },
+        { 0x87fc, 0x1f1e1d1c },
+        /* PHY registers */
+        /*{ AR5K_PHY_AGC, 0x00000000 },*/
+        { AR5K_PHY(3),  0xad848e19 },
+        { AR5K_PHY(4),  0x7d28e000 },
+        { AR5K_PHY_TIMING_3, 0x9c0a9f6b },
+        { AR5K_PHY_ACT, 0x00000000 },
+        /*{ AR5K_PHY(11), 0x00022ffe },*/
+        /*{ AR5K_PHY(15), 0x00020100 },*/
+        { AR5K_PHY(16), 0x206a017a },
+        /*{ AR5K_PHY(19), 0x1284613c },*/
+        { AR5K_PHY(21), 0x00000859 },
+        { AR5K_PHY(64), 0x00000000 },
+        { AR5K_PHY(65), 0x00000000 },
+        { AR5K_PHY(66), 0x00000000 },
+        { AR5K_PHY(67), 0x00800000 },
+        { AR5K_PHY(68), 0x00000001 },
+        /*{ AR5K_PHY(71), 0x0000092a },*/ /* Old value */
+        { AR5K_PHY(71), 0x00000c80 },
+        { AR5K_PHY_IQ,  0x05100000 },
+        { AR5K_PHY(74), 0x00000001 },
+        { AR5K_PHY(75), 0x00000004 },
+        { AR5K_PHY_TXPOWER_RATE1, 0x1e1f2022 },
+        { AR5K_PHY_TXPOWER_RATE2, 0x0a0b0c0d },
+        { AR5K_PHY_TXPOWER_RATE_MAX, 0x0000003f },
+        /*{ AR5K_PHY(80), 0x00000004 },*/
+        { AR5K_PHY(82), 0x9280b212 },
+        { AR5K_PHY_RADAR, 0x5d50e188 },
+        /*{ AR5K_PHY(86), 0x000000ff },*/
+        { AR5K_PHY(87), 0x004b6a8e },
+        { AR5K_PHY(90), 0x000003ce },
+        { AR5K_PHY(92), 0x192fb515 },
+        /*{ AR5K_PHY(93), 0x00000000 },*/
+        { AR5K_PHY(94), 0x00000001 },
+        { AR5K_PHY(95), 0x00000000 },
+        /*{ AR5K_PHY(644), 0x0080a333 },*/ /* Old value */
+        /*{ AR5K_PHY(645), 0x00206c10 },*/ /* Old value */
+        { AR5K_PHY(644), 0x00806333 },
+        { AR5K_PHY(645), 0x00106c10 },
+        { AR5K_PHY(646), 0x009c4060 },
+        /*{ AR5K_PHY(647), 0x1483800a },*/ /* Old value */
+        { AR5K_PHY(647), 0x1483800a },
+        { AR5K_PHY(648), 0x01831061 },
+        { AR5K_PHY(649), 0x00000400 },
+        /*{ AR5K_PHY(650), 0x000001b5 },*/
+        { AR5K_PHY(651), 0x00000000 },
+        { AR5K_PHY_TXPOWER_RATE3, 0x20202020 },
+        { AR5K_PHY_TXPOWER_RATE2, 0x20202020 },
+        /*{ AR5K_PHY(655), 0x13c889af },*/
+        { AR5K_PHY(656), 0x38490a20 },
+        { AR5K_PHY(657), 0x00007bb6 },
+        { AR5K_PHY(658), 0x0fff3ffc },
+        /*{ AR5K_PHY_CCKTXCTL, 0x00000000 },*/
+};
+
+/* Initial mode-specific settings for AR5212 (Written before ar5212_ini) */
+static const struct ath5k_ini_mode ar5212_ini_mode_start[] = {
+        { AR5K_PHY(640),
+        /*        a/XR        aTurbo      b           g (DYN)     gTurbo */
+                { 0x00000008, 0x00000008, 0x0000000b, 0x0000000e, 0x0000000e } },
+        { AR5K_PHY(0),
+                { 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(0),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(1),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(2),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(3),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(4),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(5),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(6),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(7),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(8),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+        { AR5K_QUEUE_DFS_LOCAL_IFS(9),
+                { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+        { AR5K_DCU_GBL_IFS_SIFS,
+                { 0x00000230, 0x000001e0, 0x000000b0, 0x00000160, 0x000001e0 } },
+        { AR5K_DCU_GBL_IFS_SLOT,
+                { 0x00000168, 0x000001e0, 0x000001b8, 0x0000018c, 0x000001e0 } },
+        { AR5K_DCU_GBL_IFS_EIFS,
+                { 0x00000e60, 0x00001180, 0x00001f1c, 0x00003e38, 0x00001180 } },
+        { AR5K_DCU_GBL_IFS_MISC,
+                { 0x0000a0e0, 0x00014068, 0x00005880, 0x0000b0e0, 0x00014068 } },
+        { AR5K_TIME_OUT,
+                { 0x03e803e8, 0x06e006e0, 0x04200420, 0x08400840, 0x06e006e0 } },
+        { AR5K_PHY_TURBO,
+                { 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x00000003 } },
+        { AR5K_PHY(8),
+                { 0x02020200, 0x02020200, 0x02010200, 0x02020200, 0x02020200 } },
+        { AR5K_PHY(9),
+                { 0x00000e0e, 0x00000e0e, 0x00000707, 0x00000e0e, 0x00000e0e } },
+        { AR5K_PHY(17),
+                { 0x1372161c, 0x13721c25, 0x13721722, 0x137216a2, 0x13721c25 } },
+        { AR5K_PHY_AGCCTL,
+                { 0x00009d10, 0x00009d10, 0x00009d18, 0x00009d18, 0x00009d18 } },
+        { AR5K_PHY_NF,
+                { 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 } },
+        { AR5K_PHY(26),
+                { 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190 } },
+        { AR5K_PHY(70),
+                { 0x000001b8, 0x000001b8, 0x00000084, 0x00000108, 0x000001b8 } },
+        { AR5K_PHY(73),
+                { 0x10058a05, 0x10058a05, 0x10058a05, 0x10058a05, 0x10058a05 } },
+        { 0xa230,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000108, 0x00000000 } },
+};
+
+/* Initial mode-specific settings for AR5212 + RF5111 (Written after ar5212_ini) */
+/* New dump pending */
+static const struct ath5k_ini_mode ar5212_rf5111_ini_mode_end[] = {
+        { AR5K_PHY(640), /* This one differs from ar5212_ini_mode_start ! */
+        /*        a/XR        aTurbo      b           g (DYN)     gTurbo */
+                { 0x00000000, 0x00000000, 0x00000003, 0x00000006, 0x00000006 } },
+        { AR5K_TXCFG,
+                { 0x00008015, 0x00008015, 0x00008015, 0x00008015, 0x00008015 } },
+        { AR5K_USEC_5211,
+                { 0x128d8fa7, 0x09880fcf, 0x04e00f95, 0x12e00fab, 0x09880fcf } },
+        { AR5K_PHY(10),
+                { 0x0a020001, 0x0a020001, 0x05010100, 0x0a020001, 0x0a020001 } },
+        { AR5K_PHY(13),
+                { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+        { AR5K_PHY(14),
+                { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } },
+        { AR5K_PHY(18),
+                { 0x0018da5a, 0x0018da5a, 0x0018ca69, 0x0018ca69, 0x0018ca69 } },
+        { AR5K_PHY(20),
+                { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } },
+        { AR5K_PHY_SIG,
+                { 0x7e800d2e, 0x7e800d2e, 0x7ee84d2e, 0x7ee84d2e, 0x7e800d2e } },
+        { AR5K_PHY_AGCCOARSE,
+                { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137615e } },
+        { AR5K_PHY(27),
+                { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb080, 0x050cb080 } },
+        { AR5K_PHY_RX_DELAY,
+                { 0x00002710, 0x00002710, 0x0000157c, 0x00002af8, 0x00002710 } },
+        { AR5K_PHY_FRAME_CTL_5211,
+                { 0xf7b81020, 0xf7b81020, 0xf7b80d20, 0xf7b81020, 0xf7b81020 } },
+        { AR5K_PHY_GAIN_2GHZ,
+                { 0x642c416a, 0x642c416a, 0x6440416a, 0x6440416a, 0x6440416a } },
+        { 0xa21c,
+                { 0x1883800a, 0x1883800a, 0x1873800a, 0x1883800a, 0x1883800a } },
+        { AR5K_DCU_FP,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { AR5K_PHY_AGC,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { AR5K_PHY(11),
+                { 0x00022ffe, 0x00022ffe, 0x00022ffe, 0x00022ffe, 0x00022ffe } },
+        { AR5K_PHY(15),
+                { 0x00020100, 0x00020100, 0x00020100, 0x00020100, 0x00020100 } },
+        { AR5K_PHY(19),
+                { 0x1284613c, 0x1284613c, 0x1284613c, 0x1284613c, 0x1284613c } },
+        { AR5K_PHY_PAPD_PROBE,
+                { 0x00004883, 0x00004883, 0x00004883, 0x00004883, 0x00004883 } },
+        { AR5K_PHY(80),
+                { 0x00000004, 0x00000004, 0x00000004, 0x00000004, 0x00000004 } },
+        { AR5K_PHY(86),
+                { 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff } },
+        { AR5K_PHY(93),
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { AR5K_PHY_SPENDING,
+                { 0x00000018, 0x00000018, 0x00000018, 0x00000018, 0x00000018 } },
+        { AR5K_PHY_CCKTXCTL,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { AR5K_PHY(642),
+                { 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } },
+        { 0xa23c,
+                { 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af } },
+};
+
+/* Initial mode-specific settings for AR5212 + RF5112 (Written after ar5212_ini) */
+/* XXX: No dumps for turbog yet, but i found settings from old values so it should be ok */
+static const struct ath5k_ini_mode ar5212_rf5112_ini_mode_end[] = {
+        { AR5K_TXCFG,
+        /*        a/XR        aTurbo      b           g (DYN)     gTurbo */
+                { 0x00008015, 0x00008015, 0x00008015, 0x00008015, 0x00008015 } },
+        { AR5K_USEC_5211,
+                { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } },
+        { AR5K_PHY(10),
+                { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } },
+        { AR5K_PHY(13),
+                { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+        { AR5K_PHY(14),
+                { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } },
+        { AR5K_PHY(18),
+                { 0x0018da6d, 0x0018da6d, 0x0018ca75, 0x0018ca75, 0x0018ca75 } },
+        { AR5K_PHY(20),
+                { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } },
+        { AR5K_PHY_SIG,
+                { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e, 0x7ee80d2e } },
+        { AR5K_PHY_AGCCOARSE,
+                { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e } },
+        { AR5K_PHY(27),
+                { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } },
+        { AR5K_PHY_RX_DELAY,
+                { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } },
+        { AR5K_PHY_FRAME_CTL_5211,
+                { 0xf7b81020, 0xf7b81020, 0xf7b80d10, 0xf7b81010, 0xf7b81010 } },
+        { AR5K_PHY_CCKTXCTL,
+                { 0x00000000, 0x00000000, 0x00000008, 0x00000008, 0x00000008 } },
+        { AR5K_PHY(642),
+                { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } },
+        { AR5K_PHY_GAIN_2GHZ,
+                { 0x642c0140, 0x642c0140, 0x6442c160, 0x6442c160, 0x6442c160 } },
+        { 0xa21c,
+                { 0x1883800a, 0x1883800a, 0x1873800a, 0x1883800a, 0x1883800a } },
+        { AR5K_DCU_FP,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { AR5K_PHY_AGC,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { AR5K_PHY(11),
+                { 0x00022ffe, 0x00022ffe, 0x00022ffe, 0x00022ffe, 0x00022ffe } },
+        { AR5K_PHY(15),
+                { 0x00020100, 0x00020100, 0x00020100, 0x00020100, 0x00020100 } },
+        { AR5K_PHY(19),
+                { 0x1284613c, 0x1284613c, 0x1284613c, 0x1284613c, 0x1284613c } },
+        { AR5K_PHY_PAPD_PROBE,
+                { 0x00004882, 0x00004882, 0x00004882, 0x00004882, 0x00004882 } },
+        { AR5K_PHY(80),
+                { 0x00000004, 0x00000004, 0x00000004, 0x00000004, 0x00000004 } },
+        { AR5K_PHY(86),
+                { 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff } },
+        { AR5K_PHY(93),
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0xa228,
+                { 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5 } },
+        { 0xa23c,
+                { 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af } },
+};
+
+/* Initial mode-specific settings for RF5413/5414 (Written after ar5212_ini) */
+/* XXX: No dumps for turbog yet, so turbog is the same with g here with some
+ * minor tweaking based on dumps from other chips */
+static const struct ath5k_ini_mode rf5413_ini_mode_end[] = {
+        { AR5K_TXCFG,
+        /*        a/XR        aTurbo      b           g           gTurbo */
+                { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } },
+        { AR5K_USEC_5211,
+                { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } },
+        { AR5K_PHY(10),
+                { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } },
+        { AR5K_PHY(13),
+                { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+        { AR5K_PHY(14),
+                { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } },
+        { AR5K_PHY(18),
+                { 0x0018fa61, 0x0018fa61, 0x001a1a63, 0x001a1a63, 0x001a1a63 } },
+        { AR5K_PHY(20),
+                { 0x0c98b4e0, 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da, 0x0c98b0da } },
+        { AR5K_PHY_SIG,
+                { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } },
+        { AR5K_PHY_AGCCOARSE,
+                { 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e } },
+        { AR5K_PHY(27),
+                { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } },
+        { AR5K_PHY_RX_DELAY,
+                { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } },
+        { AR5K_PHY_FRAME_CTL_5211,
+                { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } },
+        { AR5K_PHY_CCKTXCTL,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { AR5K_PHY(642),
+                { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } },
+        { AR5K_PHY_GAIN_2GHZ,
+                { 0x002ec1e0, 0x002ec1e0, 0x002ac120, 0x002ac120, 0x002ac120 } },
+        { 0xa21c,
+                { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } },
+        { 0xa300,
+                { 0x18010000, 0x18010000, 0x18010000, 0x18010000, 0x18010000 } },
+        { 0xa304,
+                { 0x30032602, 0x30032602, 0x30032602, 0x30032602, 0x30032602 } },
+        { 0xa308,
+                { 0x48073e06, 0x48073e06, 0x48073e06, 0x48073e06, 0x48073e06 } },
+        { 0xa30c,
+                { 0x560b4c0a, 0x560b4c0a, 0x560b4c0a, 0x560b4c0a, 0x560b4c0a } },
+        { 0xa310,
+                { 0x641a600f, 0x641a600f, 0x641a600f, 0x641a600f, 0x641a600f } },
+        { 0xa314,
+                { 0x784f6e1b, 0x784f6e1b, 0x784f6e1b, 0x784f6e1b, 0x784f6e1b } },
+        { 0xa318,
+                { 0x868f7c5a, 0x868f7c5a, 0x868f7c5a, 0x868f7c5a, 0x868f7c5a } },
+        { 0xa31c,
+                { 0x90cf865b, 0x90cf865b, 0x8ecf865b, 0x8ecf865b, 0x8ecf865b } },
+        { 0xa320,
+                { 0x9d4f970f, 0x9d4f970f, 0x9b4f970f, 0x9b4f970f, 0x9b4f970f } },
+        { 0xa324,
+                { 0xa7cfa38f, 0xa7cfa38f, 0xa3cf9f8f, 0xa3cf9f8f, 0xa3cf9f8f } },
+        { 0xa328,
+                { 0xb55faf1f, 0xb55faf1f, 0xb35faf1f, 0xb35faf1f, 0xb35faf1f } },
+        { 0xa32c,
+                { 0xbddfb99f, 0xbddfb99f, 0xbbdfb99f, 0xbbdfb99f, 0xbbdfb99f } },
+        { 0xa330,
+                { 0xcb7fc53f, 0xcb7fc53f, 0xcb7fc73f, 0xcb7fc73f, 0xcb7fc73f } },
+        { 0xa334,
+                { 0xd5ffd1bf, 0xd5ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf } },
+        { AR5K_DCU_FP,
+                { 0x000003e0, 0x000003e0, 0x000003e0, 0x000003e0, 0x000003e0 } },
+        { 0x4068,
+                { 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 } },
+        { 0x8060,
+                { 0x0000000f, 0x0000000f, 0x0000000f, 0x0000000f, 0x0000000f } },
+        { 0x809c,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0x80a0,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0x8118,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0x811c,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0x8120,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0x8124,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0x8128,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0x812c,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0x8130,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0x8134,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0x8138,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0x813c,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0x8140,
+                { 0x800003f9, 0x800003f9, 0x800003f9, 0x800003f9, 0x800003f9 } },
+        { 0x8144,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { AR5K_PHY_AGC,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { AR5K_PHY(11),
+                { 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000 } },
+        { AR5K_PHY(15),
+                { 0x00200400, 0x00200400, 0x00200400, 0x00200400, 0x00200400 } },
+        { AR5K_PHY(19),
+                { 0x1284233c, 0x1284233c, 0x1284233c, 0x1284233c, 0x1284233c } },
+        { AR5K_PHY_SCR,
+                { 0x0000001f, 0x0000001f, 0x0000001f, 0x0000001f, 0x0000001f } },
+        { AR5K_PHY_SLMT,
+                { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } },
+        { AR5K_PHY_SCAL,
+                { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
+        { AR5K_PHY(86),
+                { 0x00081fff, 0x00081fff, 0x00081fff, 0x00081fff, 0x00081fff } },
+        { AR5K_PHY(96),
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { AR5K_PHY(97),
+                { 0x02800000, 0x02800000, 0x02800000, 0x02800000, 0x02800000 } },
+        { AR5K_PHY(104),
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { AR5K_PHY(120),
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { AR5K_PHY(121),
+                { 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa } },
+        { AR5K_PHY(122),
+                { 0x3c466478, 0x3c466478, 0x3c466478, 0x3c466478, 0x3c466478 } },
+        { AR5K_PHY(123),
+                { 0x000000aa, 0x000000aa, 0x000000aa, 0x000000aa, 0x000000aa } },
+        { AR5K_PHY_SCLOCK,
+                { 0x0000000c, 0x0000000c, 0x0000000c, 0x0000000c, 0x0000000c } },
+        { AR5K_PHY_SDELAY,
+                { 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff } },
+        { AR5K_PHY_SPENDING,
+                { 0x00000014, 0x00000014, 0x00000014, 0x00000014, 0x00000014 } },
+        { 0xa228,
+                { 0x000009b5, 0x000009b5, 0x000009b5, 0x000009b5, 0x000009b5 } },
+        { 0xa23c,
+                { 0x93c889af, 0x93c889af, 0x93c889af, 0x93c889af, 0x93c889af } },
+        { 0xa24c,
+                { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } },
+        { 0xa250,
+                { 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000 } },
+        { 0xa254,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0xa258,
+                { 0x0cc75380, 0x0cc75380, 0x0cc75380, 0x0cc75380, 0x0cc75380 } },
+        { 0xa25c,
+                { 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01 } },
+        { 0xa260,
+                { 0x5f690f01, 0x5f690f01, 0x5f690f01, 0x5f690f01, 0x5f690f01 } },
+        { 0xa264,
+                { 0x00418a11, 0x00418a11, 0x00418a11, 0x00418a11, 0x00418a11 } },
+        { 0xa268,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0xa26c,
+                { 0x0c30c16a, 0x0c30c16a, 0x0c30c16a, 0x0c30c16a, 0x0c30c16a } },
+        { 0xa270,
+                { 0x00820820, 0x00820820, 0x00820820, 0x00820820, 0x00820820 } },
+        { 0xa274,
+                { 0x081b7caa, 0x081b7caa, 0x081b7caa, 0x081b7caa, 0x081b7caa } },
+        { 0xa278,
+                { 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce } },
+        { 0xa27c,
+                { 0x051701ce, 0x051701ce, 0x051701ce, 0x051701ce, 0x051701ce } },
+        { 0xa338,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0xa33c,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0xa340,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0xa344,
+                { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0xa348,
+                { 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff } },
+        { 0xa34c,
+                { 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff } },
+        { 0xa350,
+                { 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff } },
+        { 0xa354,
+                { 0x0003ffff, 0x0003ffff, 0x0003ffff, 0x0003ffff, 0x0003ffff } },
+        { 0xa358,
+                { 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f } },
+        { 0xa35c,
+                { 0x066c420f, 0x066c420f, 0x066c420f, 0x066c420f, 0x066c420f } },
+        { 0xa360,
+                { 0x0f282207, 0x0f282207, 0x0f282207, 0x0f282207, 0x0f282207 } },
+        { 0xa364,
+                { 0x17601685, 0x17601685, 0x17601685, 0x17601685, 0x17601685 } },
+        { 0xa368,
+                { 0x1f801104, 0x1f801104, 0x1f801104, 0x1f801104, 0x1f801104 } },
+        { 0xa36c,
+                { 0x37a00c03, 0x37a00c03, 0x37a00c03, 0x37a00c03, 0x37a00c03 } },
+        { 0xa370,
+                { 0x3fc40883, 0x3fc40883, 0x3fc40883, 0x3fc40883, 0x3fc40883 } },
+        { 0xa374,
+                { 0x57c00803, 0x57c00803, 0x57c00803, 0x57c00803, 0x57c00803 } },
+        { 0xa378,
+                { 0x5fd80682, 0x5fd80682, 0x5fd80682, 0x5fd80682, 0x5fd80682 } },
+        { 0xa37c,
+                { 0x7fe00482, 0x7fe00482, 0x7fe00482, 0x7fe00482, 0x7fe00482 } },
+        { 0xa380,
+                { 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba } },
+        { 0xa384,
+                { 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0 } },
+};
+
+/*
+ * Initial BaseBand Gain settings for RF5111/5112 (AR5210 comes with
+ * RF5110 only so initial BB Gain settings are included in AR5K_AR5210_INI)
+ */
+
+/* RF5111 Initial BaseBand Gain settings */
+static const struct ath5k_ini rf5111_ini_bbgain[] = {
+        { AR5K_BB_GAIN(0), 0x00000000 },
+        { AR5K_BB_GAIN(1), 0x00000020 },
+        { AR5K_BB_GAIN(2), 0x00000010 },
+        { AR5K_BB_GAIN(3), 0x00000030 },
+        { AR5K_BB_GAIN(4), 0x00000008 },
+        { AR5K_BB_GAIN(5), 0x00000028 },
+        { AR5K_BB_GAIN(6), 0x00000004 },
+        { AR5K_BB_GAIN(7), 0x00000024 },
+        { AR5K_BB_GAIN(8), 0x00000014 },
+        { AR5K_BB_GAIN(9), 0x00000034 },
+        { AR5K_BB_GAIN(10), 0x0000000c },
+        { AR5K_BB_GAIN(11), 0x0000002c },
+        { AR5K_BB_GAIN(12), 0x00000002 },
+        { AR5K_BB_GAIN(13), 0x00000022 },
+        { AR5K_BB_GAIN(14), 0x00000012 },
+        { AR5K_BB_GAIN(15), 0x00000032 },
+        { AR5K_BB_GAIN(16), 0x0000000a },
+        { AR5K_BB_GAIN(17), 0x0000002a },
+        { AR5K_BB_GAIN(18), 0x00000006 },
+        { AR5K_BB_GAIN(19), 0x00000026 },
+        { AR5K_BB_GAIN(20), 0x00000016 },
+        { AR5K_BB_GAIN(21), 0x00000036 },
+        { AR5K_BB_GAIN(22), 0x0000000e },
+        { AR5K_BB_GAIN(23), 0x0000002e },
+        { AR5K_BB_GAIN(24), 0x00000001 },
+        { AR5K_BB_GAIN(25), 0x00000021 },
+        { AR5K_BB_GAIN(26), 0x00000011 },
+        { AR5K_BB_GAIN(27), 0x00000031 },
+        { AR5K_BB_GAIN(28), 0x00000009 },
+        { AR5K_BB_GAIN(29), 0x00000029 },
+        { AR5K_BB_GAIN(30), 0x00000005 },
+        { AR5K_BB_GAIN(31), 0x00000025 },
+        { AR5K_BB_GAIN(32), 0x00000015 },
+        { AR5K_BB_GAIN(33), 0x00000035 },
+        { AR5K_BB_GAIN(34), 0x0000000d },
+        { AR5K_BB_GAIN(35), 0x0000002d },
+        { AR5K_BB_GAIN(36), 0x00000003 },
+        { AR5K_BB_GAIN(37), 0x00000023 },
+        { AR5K_BB_GAIN(38), 0x00000013 },
+        { AR5K_BB_GAIN(39), 0x00000033 },
+        { AR5K_BB_GAIN(40), 0x0000000b },
+        { AR5K_BB_GAIN(41), 0x0000002b },
+        { AR5K_BB_GAIN(42), 0x0000002b },
+        { AR5K_BB_GAIN(43), 0x0000002b },
+        { AR5K_BB_GAIN(44), 0x0000002b },
+        { AR5K_BB_GAIN(45), 0x0000002b },
+        { AR5K_BB_GAIN(46), 0x0000002b },
+        { AR5K_BB_GAIN(47), 0x0000002b },
+        { AR5K_BB_GAIN(48), 0x0000002b },
+        { AR5K_BB_GAIN(49), 0x0000002b },
+        { AR5K_BB_GAIN(50), 0x0000002b },
+        { AR5K_BB_GAIN(51), 0x0000002b },
+        { AR5K_BB_GAIN(52), 0x0000002b },
+        { AR5K_BB_GAIN(53), 0x0000002b },
+        { AR5K_BB_GAIN(54), 0x0000002b },
+        { AR5K_BB_GAIN(55), 0x0000002b },
+        { AR5K_BB_GAIN(56), 0x0000002b },
+        { AR5K_BB_GAIN(57), 0x0000002b },
+        { AR5K_BB_GAIN(58), 0x0000002b },
+        { AR5K_BB_GAIN(59), 0x0000002b },
+        { AR5K_BB_GAIN(60), 0x0000002b },
+        { AR5K_BB_GAIN(61), 0x0000002b },
+        { AR5K_BB_GAIN(62), 0x00000002 },
+        { AR5K_BB_GAIN(63), 0x00000016 },
+};
+
+/* RF5112 Initial BaseBand Gain settings (Same for RF5413/5414) */
+static const struct ath5k_ini rf5112_ini_bbgain[] = {
+        { AR5K_BB_GAIN(0), 0x00000000 },
+        { AR5K_BB_GAIN(1), 0x00000001 },
+        { AR5K_BB_GAIN(2), 0x00000002 },
+        { AR5K_BB_GAIN(3), 0x00000003 },
+        { AR5K_BB_GAIN(4), 0x00000004 },
+        { AR5K_BB_GAIN(5), 0x00000005 },
+        { AR5K_BB_GAIN(6), 0x00000008 },
+        { AR5K_BB_GAIN(7), 0x00000009 },
+        { AR5K_BB_GAIN(8), 0x0000000a },
+        { AR5K_BB_GAIN(9), 0x0000000b },
+        { AR5K_BB_GAIN(10), 0x0000000c },
+        { AR5K_BB_GAIN(11), 0x0000000d },
+        { AR5K_BB_GAIN(12), 0x00000010 },
+        { AR5K_BB_GAIN(13), 0x00000011 },
+        { AR5K_BB_GAIN(14), 0x00000012 },
+        { AR5K_BB_GAIN(15), 0x00000013 },
+        { AR5K_BB_GAIN(16), 0x00000014 },
+        { AR5K_BB_GAIN(17), 0x00000015 },
+        { AR5K_BB_GAIN(18), 0x00000018 },
+        { AR5K_BB_GAIN(19), 0x00000019 },
+        { AR5K_BB_GAIN(20), 0x0000001a },
+        { AR5K_BB_GAIN(21), 0x0000001b },
+        { AR5K_BB_GAIN(22), 0x0000001c },
+        { AR5K_BB_GAIN(23), 0x0000001d },
+        { AR5K_BB_GAIN(24), 0x00000020 },
+        { AR5K_BB_GAIN(25), 0x00000021 },
+        { AR5K_BB_GAIN(26), 0x00000022 },
+        { AR5K_BB_GAIN(27), 0x00000023 },
+        { AR5K_BB_GAIN(28), 0x00000024 },
+        { AR5K_BB_GAIN(29), 0x00000025 },
+        { AR5K_BB_GAIN(30), 0x00000028 },
+        { AR5K_BB_GAIN(31), 0x00000029 },
+        { AR5K_BB_GAIN(32), 0x0000002a },
+        { AR5K_BB_GAIN(33), 0x0000002b },
+        { AR5K_BB_GAIN(34), 0x0000002c },
+        { AR5K_BB_GAIN(35), 0x0000002d },
+        { AR5K_BB_GAIN(36), 0x00000030 },
+        { AR5K_BB_GAIN(37), 0x00000031 },
+        { AR5K_BB_GAIN(38), 0x00000032 },
+        { AR5K_BB_GAIN(39), 0x00000033 },
+        { AR5K_BB_GAIN(40), 0x00000034 },
+        { AR5K_BB_GAIN(41), 0x00000035 },
+        { AR5K_BB_GAIN(42), 0x00000035 },
+        { AR5K_BB_GAIN(43), 0x00000035 },
+        { AR5K_BB_GAIN(44), 0x00000035 },
+        { AR5K_BB_GAIN(45), 0x00000035 },
+        { AR5K_BB_GAIN(46), 0x00000035 },
+        { AR5K_BB_GAIN(47), 0x00000035 },
+        { AR5K_BB_GAIN(48), 0x00000035 },
+        { AR5K_BB_GAIN(49), 0x00000035 },
+        { AR5K_BB_GAIN(50), 0x00000035 },
+        { AR5K_BB_GAIN(51), 0x00000035 },
+        { AR5K_BB_GAIN(52), 0x00000035 },
+        { AR5K_BB_GAIN(53), 0x00000035 },
+        { AR5K_BB_GAIN(54), 0x00000035 },
+        { AR5K_BB_GAIN(55), 0x00000035 },
+        { AR5K_BB_GAIN(56), 0x00000035 },
+        { AR5K_BB_GAIN(57), 0x00000035 },
+        { AR5K_BB_GAIN(58), 0x00000035 },
+        { AR5K_BB_GAIN(59), 0x00000035 },
+        { AR5K_BB_GAIN(60), 0x00000035 },
+        { AR5K_BB_GAIN(61), 0x00000035 },
+        { AR5K_BB_GAIN(62), 0x00000010 },
+        { AR5K_BB_GAIN(63), 0x0000001a },
+};
+
+
+/*
+ * Write initial register dump
+ */
+static void ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size,
+                const struct ath5k_ini *ini_regs, bool change_channel)
+{
+        unsigned int i;
+
+        /* Write initial registers */
+        for (i = 0; i < size; i++) {
+                /* On channel change there is
+                 * no need to mess with PCU */
+                if (change_channel &&
+                                ini_regs[i].ini_register >= AR5K_PCU_MIN &&
+                                ini_regs[i].ini_register <= AR5K_PCU_MAX)
+                        continue;
+
+                switch (ini_regs[i].ini_mode) {
+                case AR5K_INI_READ:
+                        /* Cleared on read */
+                        ath5k_hw_reg_read(ah, ini_regs[i].ini_register);
+                        break;
+                case AR5K_INI_WRITE:
+                default:
+                        AR5K_REG_WAIT(i);
+                        ath5k_hw_reg_write(ah, ini_regs[i].ini_value,
+                                        ini_regs[i].ini_register);
+                }
+        }
+}
+
+static void ath5k_hw_ini_mode_registers(struct ath5k_hw *ah,
+                unsigned int size, const struct ath5k_ini_mode *ini_mode,
+                u8 mode)
+{
+        unsigned int i;
+
+        for (i = 0; i < size; i++) {
+                AR5K_REG_WAIT(i);
+                ath5k_hw_reg_write(ah, ini_mode[i].mode_value[mode],
+                        (u32)ini_mode[i].mode_register);
+        }
+
+}
+
+int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel)
+{
+        /*
+         * Write initial register settings
+         */
+
+        /* For AR5212 and combatible */
+        if (ah->ah_version == AR5K_AR5212){
+
+                /* First set of mode-specific settings */
+                ath5k_hw_ini_mode_registers(ah,
+                        ARRAY_SIZE(ar5212_ini_mode_start),
+                        ar5212_ini_mode_start, mode);
+
+                /*
+                 * Write initial settings common for all modes
+                 */
+                ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5212_ini),
+                                        ar5212_ini, change_channel);
+
+                /* Second set of mode-specific settings */
+                if (ah->ah_radio == AR5K_RF5111){
+                        ath5k_hw_ini_mode_registers(ah,
+                                        ARRAY_SIZE(ar5212_rf5111_ini_mode_end),
+                                        ar5212_rf5111_ini_mode_end, mode);
+                        /* Baseband gain table */
+                        ath5k_hw_ini_registers(ah,
+                                        ARRAY_SIZE(rf5111_ini_bbgain),
+                                        rf5111_ini_bbgain, change_channel);
+                } else if (ah->ah_radio == AR5K_RF5112){
+                        ath5k_hw_ini_mode_registers(ah,
+                                        ARRAY_SIZE(ar5212_rf5112_ini_mode_end),
+                                        ar5212_rf5112_ini_mode_end, mode);
+                        /* Baseband gain table */
+                        ath5k_hw_ini_registers(ah,
+                                        ARRAY_SIZE(rf5112_ini_bbgain),
+                                        rf5112_ini_bbgain, change_channel);
+                } else if (ah->ah_radio == AR5K_RF5413){
+                        ath5k_hw_ini_mode_registers(ah,
+                                        ARRAY_SIZE(rf5413_ini_mode_end),
+                                        rf5413_ini_mode_end, mode);
+                        /* Baseband gain table */
+                        ath5k_hw_ini_registers(ah,
+                                        ARRAY_SIZE(rf5112_ini_bbgain),
+                                        rf5112_ini_bbgain, change_channel);
+                }
+        /* For AR5211 */
+        } else if (ah->ah_version == AR5K_AR5211) {
+
+                if(mode > 2){ /* AR5K_INI_VAL_11B */
+                        ATH5K_ERR(ah->ah_sc,"unsupported channel mode: %d\n", mode);
+                        return -EINVAL;
+                }
+
+                /* Mode-specific settings */
+                ath5k_hw_ini_mode_registers(ah, ARRAY_SIZE(ar5211_ini_mode),
+                                ar5211_ini_mode, mode);
+
+                /*
+                 * Write initial settings common for all modes
+                 */
+                ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5211_ini),
+                                ar5211_ini, change_channel);
+
+                /* AR5211 only comes with 5111 */
+
+                /* Baseband gain table */
+                ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5111_ini_bbgain),
+                                rf5111_ini_bbgain, change_channel);
+        /* For AR5210 (for mode settings check out ath5k_hw_reset_tx_queue) */
+        } else if (ah->ah_version == AR5K_AR5210) {
+                ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5210_ini),
+                                ar5210_ini, change_channel);
+        }
+
+        return 0;
+}
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
new file mode 100644
index 000000000000..b95941797141
--- /dev/null
+++ b/drivers/net/wireless/ath5k/phy.c
@@ -0,0 +1,2071 @@
+/*
+ * PHY functions
+ *
+ * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/delay.h>
+
+#include "ath5k.h"
+#include "reg.h"
+#include "base.h"
+
+/* Struct to hold initial RF register values (RF Banks) */
+struct ath5k_ini_rf {
+        u8      rf_bank;        /* check out ath5k_reg.h */
+        u16     rf_register;    /* register address */
+        u32     rf_value[5];    /* register value for different modes (above) */
+};
+
+/*
+ * Mode-specific RF Gain table (64bytes) for RF5111/5112
+ * (RF5110 only comes with AR5210 and only supports a/turbo a mode so initial
+ * RF Gain values are included in AR5K_AR5210_INI)
+ */
+struct ath5k_ini_rfgain {
+        u16     rfg_register;   /* RF Gain register address */
+        u32     rfg_value[2];   /* [freq (see below)] */
+};
+
+struct ath5k_gain_opt {
+        u32                     go_default;
+        u32                     go_steps_count;
+        const struct ath5k_gain_opt_step        go_step[AR5K_GAIN_STEP_COUNT];
+};
+
+/* RF5111 mode-specific init registers */
+static const struct ath5k_ini_rf rfregs_5111[] = {
+        { 0, 0x989c,
+        /*    mode a/XR   mode aTurbo mode b      mode g      mode gTurbo */
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0, 0x989c,
+            { 0x00380000, 0x00380000, 0x00380000, 0x00380000, 0x00380000 } },
+        { 0, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 0, 0x989c,
+            { 0x00000000, 0x00000000, 0x000000c0, 0x00000080, 0x00000080 } },
+        { 0, 0x989c,
+            { 0x000400f9, 0x000400f9, 0x000400ff, 0x000400fd, 0x000400fd } },
+        { 0, 0x98d4,
+            { 0x00000000, 0x00000000, 0x00000004, 0x00000004, 0x00000004 } },
+        { 1, 0x98d4,
+            { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
+        { 2, 0x98d4,
+            { 0x00000010, 0x00000014, 0x00000010, 0x00000010, 0x00000014 } },
+        { 3, 0x98d8,
+            { 0x00601068, 0x00601068, 0x00601068, 0x00601068, 0x00601068 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } },
+        { 6, 0x989c,
+            { 0x04000000, 0x04000000, 0x04000000, 0x04000000, 0x04000000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x0a000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x003800c0, 0x00380080, 0x023800c0, 0x003800c0, 0x003800c0 } },
+        { 6, 0x989c,
+            { 0x00020006, 0x00020006, 0x00000006, 0x00020006, 0x00020006 } },
+        { 6, 0x989c,
+            { 0x00000089, 0x00000089, 0x00000089, 0x00000089, 0x00000089 } },
+        { 6, 0x989c,
+            { 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0 } },
+        { 6, 0x989c,
+            { 0x00040007, 0x00040007, 0x00040007, 0x00040007, 0x00040007 } },
+        { 6, 0x98d4,
+            { 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a } },
+        { 7, 0x989c,
+            { 0x00000040, 0x00000048, 0x00000040, 0x00000040, 0x00000040 } },
+        { 7, 0x989c,
+            { 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 } },
+        { 7, 0x989c,
+            { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } },
+        { 7, 0x989c,
+            { 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f } },
+        { 7, 0x989c,
+            { 0x000000f1, 0x000000f1, 0x00000061, 0x000000f1, 0x000000f1 } },
+        { 7, 0x989c,
+            { 0x0000904f, 0x0000904f, 0x0000904c, 0x0000904f, 0x0000904f } },
+        { 7, 0x989c,
+            { 0x0000125a, 0x0000125a, 0x0000129a, 0x0000125a, 0x0000125a } },
+        { 7, 0x98cc,
+            { 0x0000000e, 0x0000000e, 0x0000000f, 0x0000000e, 0x0000000e } },
+};
+
+/* Initial RF Gain settings for RF5111 */
+static const struct ath5k_ini_rfgain rfgain_5111[] = {
+        /*                            5Ghz      2Ghz    */
+        { AR5K_RF_GAIN(0),      { 0x000001a9, 0x00000000 } },
+        { AR5K_RF_GAIN(1),      { 0x000001e9, 0x00000040 } },
+        { AR5K_RF_GAIN(2),      { 0x00000029, 0x00000080 } },
+        { AR5K_RF_GAIN(3),      { 0x00000069, 0x00000150 } },
+        { AR5K_RF_GAIN(4),      { 0x00000199, 0x00000190 } },
+        { AR5K_RF_GAIN(5),      { 0x000001d9, 0x000001d0 } },
+        { AR5K_RF_GAIN(6),      { 0x00000019, 0x00000010 } },
+        { AR5K_RF_GAIN(7),      { 0x00000059, 0x00000044 } },
+        { AR5K_RF_GAIN(8),      { 0x00000099, 0x00000084 } },
+        { AR5K_RF_GAIN(9),      { 0x000001a5, 0x00000148 } },
+        { AR5K_RF_GAIN(10),     { 0x000001e5, 0x00000188 } },
+        { AR5K_RF_GAIN(11),     { 0x00000025, 0x000001c8 } },
+        { AR5K_RF_GAIN(12),     { 0x000001c8, 0x00000014 } },
+        { AR5K_RF_GAIN(13),     { 0x00000008, 0x00000042 } },
+        { AR5K_RF_GAIN(14),     { 0x00000048, 0x00000082 } },
+        { AR5K_RF_GAIN(15),     { 0x00000088, 0x00000178 } },
+        { AR5K_RF_GAIN(16),     { 0x00000198, 0x000001b8 } },
+        { AR5K_RF_GAIN(17),     { 0x000001d8, 0x000001f8 } },
+        { AR5K_RF_GAIN(18),     { 0x00000018, 0x00000012 } },
+        { AR5K_RF_GAIN(19),     { 0x00000058, 0x00000052 } },
+        { AR5K_RF_GAIN(20),     { 0x00000098, 0x00000092 } },
+        { AR5K_RF_GAIN(21),     { 0x000001a4, 0x0000017c } },
+        { AR5K_RF_GAIN(22),     { 0x000001e4, 0x000001bc } },
+        { AR5K_RF_GAIN(23),     { 0x00000024, 0x000001fc } },
+        { AR5K_RF_GAIN(24),     { 0x00000064, 0x0000000a } },
+        { AR5K_RF_GAIN(25),     { 0x000000a4, 0x0000004a } },
+        { AR5K_RF_GAIN(26),     { 0x000000e4, 0x0000008a } },
+        { AR5K_RF_GAIN(27),     { 0x0000010a, 0x0000015a } },
+        { AR5K_RF_GAIN(28),     { 0x0000014a, 0x0000019a } },
+        { AR5K_RF_GAIN(29),     { 0x0000018a, 0x000001da } },
+        { AR5K_RF_GAIN(30),     { 0x000001ca, 0x0000000e } },
+        { AR5K_RF_GAIN(31),     { 0x0000000a, 0x0000004e } },
+        { AR5K_RF_GAIN(32),     { 0x0000004a, 0x0000008e } },
+        { AR5K_RF_GAIN(33),     { 0x0000008a, 0x0000015e } },
+        { AR5K_RF_GAIN(34),     { 0x000001ba, 0x0000019e } },
+        { AR5K_RF_GAIN(35),     { 0x000001fa, 0x000001de } },
+        { AR5K_RF_GAIN(36),     { 0x0000003a, 0x00000009 } },
+        { AR5K_RF_GAIN(37),     { 0x0000007a, 0x00000049 } },
+        { AR5K_RF_GAIN(38),     { 0x00000186, 0x00000089 } },
+        { AR5K_RF_GAIN(39),     { 0x000001c6, 0x00000179 } },
+        { AR5K_RF_GAIN(40),     { 0x00000006, 0x000001b9 } },
+        { AR5K_RF_GAIN(41),     { 0x00000046, 0x000001f9 } },
+        { AR5K_RF_GAIN(42),     { 0x00000086, 0x00000039 } },
+        { AR5K_RF_GAIN(43),     { 0x000000c6, 0x00000079 } },
+        { AR5K_RF_GAIN(44),     { 0x000000c6, 0x000000b9 } },
+        { AR5K_RF_GAIN(45),     { 0x000000c6, 0x000001bd } },
+        { AR5K_RF_GAIN(46),     { 0x000000c6, 0x000001fd } },
+        { AR5K_RF_GAIN(47),     { 0x000000c6, 0x0000003d } },
+        { AR5K_RF_GAIN(48),     { 0x000000c6, 0x0000007d } },
+        { AR5K_RF_GAIN(49),     { 0x000000c6, 0x000000bd } },
+        { AR5K_RF_GAIN(50),     { 0x000000c6, 0x000000fd } },
+        { AR5K_RF_GAIN(51),     { 0x000000c6, 0x000000fd } },
+        { AR5K_RF_GAIN(52),     { 0x000000c6, 0x000000fd } },
+        { AR5K_RF_GAIN(53),     { 0x000000c6, 0x000000fd } },
+        { AR5K_RF_GAIN(54),     { 0x000000c6, 0x000000fd } },
+        { AR5K_RF_GAIN(55),     { 0x000000c6, 0x000000fd } },
+        { AR5K_RF_GAIN(56),     { 0x000000c6, 0x000000fd } },
+        { AR5K_RF_GAIN(57),     { 0x000000c6, 0x000000fd } },
+        { AR5K_RF_GAIN(58),     { 0x000000c6, 0x000000fd } },
+        { AR5K_RF_GAIN(59),     { 0x000000c6, 0x000000fd } },
+        { AR5K_RF_GAIN(60),     { 0x000000c6, 0x000000fd } },
+        { AR5K_RF_GAIN(61),     { 0x000000c6, 0x000000fd } },
+        { AR5K_RF_GAIN(62),     { 0x000000c6, 0x000000fd } },
+        { AR5K_RF_GAIN(63),     { 0x000000c6, 0x000000fd } },
+};
+
+static const struct ath5k_gain_opt rfgain_opt_5111 = {
+        4,
+        9,
+        {
+                { { 4, 1, 1, 1 }, 6 },
+                { { 4, 0, 1, 1 }, 4 },
+                { { 3, 1, 1, 1 }, 3 },
+                { { 4, 0, 0, 1 }, 1 },
+                { { 4, 1, 1, 0 }, 0 },
+                { { 4, 0, 1, 0 }, -2 },
+                { { 3, 1, 1, 0 }, -3 },
+                { { 4, 0, 0, 0 }, -4 },
+                { { 2, 1, 1, 0 }, -6 }
+        }
+};
+
+/* RF5112 mode-specific init registers */
+static const struct ath5k_ini_rf rfregs_5112[] = {
+        { 1, 0x98d4,
+        /*    mode a/XR   mode aTurbo mode b      mode g      mode gTurbo */
+            { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
+        { 2, 0x98d0,
+            { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } },
+        { 3, 0x98dc,
+            { 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } },
+        { 6, 0x989c,
+            { 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000 } },
+        { 6, 0x989c,
+            { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00660000, 0x00660000, 0x00660000, 0x00660000, 0x00660000 } },
+        { 6, 0x989c,
+            { 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000 } },
+        { 6, 0x989c,
+            { 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000 } },
+        { 6, 0x989c,
+            { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
+        { 6, 0x989c,
+            { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
+        { 6, 0x989c,
+            { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
+        { 6, 0x989c,
+            { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+        { 6, 0x989c,
+            { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+        { 6, 0x989c,
+            { 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000 } },
+        { 6, 0x989c,
+            { 0x00600000, 0x00600000, 0x00600000, 0x00600000, 0x00600000 } },
+        { 6, 0x989c,
+            { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
+        { 6, 0x989c,
+            { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } },
+        { 6, 0x989c,
+            { 0x00640000, 0x00640000, 0x00640000, 0x00640000, 0x00640000 } },
+        { 6, 0x989c,
+            { 0x00200000, 0x00200000, 0x00200000, 0x00200000, 0x00200000 } },
+        { 6, 0x989c,
+            { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } },
+        { 6, 0x989c,
+            { 0x00250000, 0x00250000, 0x00250000, 0x00250000, 0x00250000 } },
+        { 6, 0x989c,
+            { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
+        { 6, 0x989c,
+            { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
+        { 6, 0x989c,
+            { 0x00510000, 0x00510000, 0x00510000, 0x00510000, 0x00510000 } },
+        { 6, 0x989c,
+            { 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000 } },
+        { 6, 0x989c,
+            { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } },
+        { 6, 0x989c,
+            { 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000 } },
+        { 6, 0x989c,
+            { 0x00400000, 0x00400000, 0x00400000, 0x00400000, 0x00400000 } },
+        { 6, 0x989c,
+            { 0x03090000, 0x03090000, 0x03090000, 0x03090000, 0x03090000 } },
+        { 6, 0x989c,
+            { 0x06000000, 0x06000000, 0x06000000, 0x06000000, 0x06000000 } },
+        { 6, 0x989c,
+            { 0x000000b0, 0x000000b0, 0x000000a8, 0x000000a8, 0x000000a8 } },
+        { 6, 0x989c,
+            { 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e } },
+        { 6, 0x989c,
+            { 0x006c4a41, 0x006c4a41, 0x006c4af1, 0x006c4a61, 0x006c4a61 } },
+        { 6, 0x989c,
+            { 0x0050892a, 0x0050892a, 0x0050892b, 0x0050892b, 0x0050892b } },
+        { 6, 0x989c,
+            { 0x00842400, 0x00842400, 0x00842400, 0x00842400, 0x00842400 } },
+        { 6, 0x989c,
+            { 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200 } },
+        { 6, 0x98d0,
+            { 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c } },
+        { 7, 0x989c,
+            { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } },
+        { 7, 0x989c,
+            { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } },
+        { 7, 0x989c,
+            { 0x0000000a, 0x0000000a, 0x00000012, 0x00000012, 0x00000012 } },
+        { 7, 0x989c,
+            { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } },
+        { 7, 0x989c,
+            { 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1 } },
+        { 7, 0x989c,
+            { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } },
+        { 7, 0x989c,
+            { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } },
+        { 7, 0x989c,
+            { 0x00000022, 0x00000022, 0x00000022, 0x00000022, 0x00000022 } },
+        { 7, 0x989c,
+            { 0x00000092, 0x00000092, 0x00000092, 0x00000092, 0x00000092 } },
+        { 7, 0x989c,
+            { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } },
+        { 7, 0x989c,
+            { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } },
+        { 7, 0x989c,
+            { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } },
+        { 7, 0x98c4,
+            { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
+};
+
+/* RF5112A mode-specific init registers */
+static const struct ath5k_ini_rf rfregs_5112a[] = {
+        { 1, 0x98d4,
+        /*    mode a/XR   mode aTurbo mode b      mode g      mode gTurbo */
+            { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
+        { 2, 0x98d0,
+            { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } },
+        { 3, 0x98dc,
+            { 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } },
+        { 6, 0x989c,
+            { 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00800000, 0x00800000, 0x00800000, 0x00800000, 0x00800000 } },
+        { 6, 0x989c,
+            { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
+        { 6, 0x989c,
+            { 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00180000, 0x00180000, 0x00180000, 0x00180000, 0x00180000 } },
+        { 6, 0x989c,
+            { 0x00600000, 0x00600000, 0x006e0000, 0x006e0000, 0x006e0000 } },
+        { 6, 0x989c,
+            { 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000 } },
+        { 6, 0x989c,
+            { 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000 } },
+        { 6, 0x989c,
+            { 0x04480000, 0x04480000, 0x04480000, 0x04480000, 0x04480000 } },
+        { 6, 0x989c,
+            { 0x00220000, 0x00220000, 0x00220000, 0x00220000, 0x00220000 } },
+        { 6, 0x989c,
+            { 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000 } },
+        { 6, 0x989c,
+            { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+        { 6, 0x989c,
+            { 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000 } },
+        { 6, 0x989c,
+            { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
+        { 6, 0x989c,
+            { 0x00190000, 0x00190000, 0x00190000, 0x00190000, 0x00190000 } },
+        { 6, 0x989c,
+            { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } },
+        { 6, 0x989c,
+            { 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000 } },
+        { 6, 0x989c,
+            { 0x00990000, 0x00990000, 0x00990000, 0x00990000, 0x00990000 } },
+        { 6, 0x989c,
+            { 0x00500000, 0x00500000, 0x00500000, 0x00500000, 0x00500000 } },
+        { 6, 0x989c,
+            { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
+        { 6, 0x989c,
+            { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
+        { 6, 0x989c,
+            { 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000 } },
+        { 6, 0x989c,
+            { 0x01740000, 0x01740000, 0x01740000, 0x01740000, 0x01740000 } },
+        { 6, 0x989c,
+            { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
+        { 6, 0x989c,
+            { 0x86280000, 0x86280000, 0x86280000, 0x86280000, 0x86280000 } },
+        { 6, 0x989c,
+            { 0x31840000, 0x31840000, 0x31840000, 0x31840000, 0x31840000 } },
+        { 6, 0x989c,
+            { 0x00020080, 0x00020080, 0x00020080, 0x00020080, 0x00020080 } },
+        { 6, 0x989c,
+            { 0x00080009, 0x00080009, 0x00080009, 0x00080009, 0x00080009 } },
+        { 6, 0x989c,
+            { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2 } },
+        { 6, 0x989c,
+            { 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084 } },
+        { 6, 0x989c,
+            { 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4 } },
+        { 6, 0x989c,
+            { 0x00119220, 0x00119220, 0x00119220, 0x00119220, 0x00119220 } },
+        { 6, 0x989c,
+            { 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800 } },
+        { 6, 0x98d8,
+            { 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230 } },
+        { 7, 0x989c,
+            { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } },
+        { 7, 0x989c,
+            { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } },
+        { 7, 0x989c,
+            { 0x00000012, 0x00000012, 0x00000012, 0x00000012, 0x00000012 } },
+        { 7, 0x989c,
+            { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } },
+        { 7, 0x989c,
+            { 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9 } },
+        { 7, 0x989c,
+            { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } },
+        { 7, 0x989c,
+            { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } },
+        { 7, 0x989c,
+            { 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2 } },
+        { 7, 0x989c,
+            { 0x00000052, 0x00000052, 0x00000052, 0x00000052, 0x00000052 } },
+        { 7, 0x989c,
+            { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } },
+        { 7, 0x989c,
+            { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } },
+        { 7, 0x989c,
+            { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } },
+        { 7, 0x98c4,
+            { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
+};
+
+
+static const struct ath5k_ini_rf rfregs_2112a[] = {
+        { 1, AR5K_RF_BUFFER_CONTROL_4,
+        /*         mode b       mode g    mode gTurbo */
+                { 0x00000020, 0x00000020, 0x00000020 } },
+        { 2, AR5K_RF_BUFFER_CONTROL_3,
+                { 0x03060408, 0x03060408, 0x03070408 } },
+        { 3, AR5K_RF_BUFFER_CONTROL_6,
+                { 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x0a000000, 0x0a000000, 0x0a000000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00800000, 0x00800000, 0x00800000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x002a0000, 0x002a0000, 0x002a0000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00010000, 0x00010000, 0x00010000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00180000, 0x00180000, 0x00180000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x006e0000, 0x006e0000, 0x006e0000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00c70000, 0x00c70000, 0x00c70000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x004b0000, 0x004b0000, 0x004b0000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x04480000, 0x04480000, 0x04480000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x002a0000, 0x002a0000, 0x002a0000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00e40000, 0x00e40000, 0x00e40000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00fc0000, 0x00fc0000, 0x00fc0000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x043f0000, 0x043f0000, 0x043f0000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x0c0c0000, 0x0c0c0000, 0x0c0c0000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x02190000, 0x02190000, 0x02190000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00240000, 0x00240000, 0x00240000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00b40000, 0x00b40000, 0x00b40000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00990000, 0x00990000, 0x00990000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00500000, 0x00500000, 0x00500000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x002a0000, 0x002a0000, 0x002a0000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00120000, 0x00120000, 0x00120000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0xc0320000, 0xc0320000, 0xc0320000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x01740000, 0x01740000, 0x01740000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00110000, 0x00110000, 0x00110000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x86280000, 0x86280000, 0x86280000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x31840000, 0x31840000, 0x31840000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00f20080, 0x00f20080, 0x00f20080 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00070019, 0x00070019, 0x00070019 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x000000b2, 0x000000b2, 0x000000b2 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00b02184, 0x00b02184, 0x00b02184 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x004125a4, 0x004125a4, 0x004125a4 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x00119220, 0x00119220, 0x00119220 } },
+        { 6, AR5K_RF_BUFFER,
+                { 0x001a4800, 0x001a4800, 0x001a4800 } },
+        { 6, AR5K_RF_BUFFER_CONTROL_5,
+                { 0x000b0230, 0x000b0230, 0x000b0230 } },
+        { 7, AR5K_RF_BUFFER,
+                { 0x00000094, 0x00000094, 0x00000094 } },
+        { 7, AR5K_RF_BUFFER,
+                { 0x00000091, 0x00000091, 0x00000091 } },
+        { 7, AR5K_RF_BUFFER,
+                { 0x00000012, 0x00000012, 0x00000012 } },
+        { 7, AR5K_RF_BUFFER,
+                { 0x00000080, 0x00000080, 0x00000080 } },
+        { 7, AR5K_RF_BUFFER,
+                { 0x000000d9, 0x000000d9, 0x000000d9 } },
+        { 7, AR5K_RF_BUFFER,
+                { 0x00000060, 0x00000060, 0x00000060 } },
+        { 7, AR5K_RF_BUFFER,
+                { 0x000000f0, 0x000000f0, 0x000000f0 } },
+        { 7, AR5K_RF_BUFFER,
+                { 0x000000a2, 0x000000a2, 0x000000a2 } },
+        { 7, AR5K_RF_BUFFER,
+                { 0x00000052, 0x00000052, 0x00000052 } },
+        { 7, AR5K_RF_BUFFER,
+                { 0x000000d4, 0x000000d4, 0x000000d4 } },
+        { 7, AR5K_RF_BUFFER,
+                { 0x000014cc, 0x000014cc, 0x000014cc } },
+        { 7, AR5K_RF_BUFFER,
+                { 0x0000048c, 0x0000048c, 0x0000048c } },
+        { 7, AR5K_RF_BUFFER_CONTROL_1,
+                { 0x00000003, 0x00000003, 0x00000003 } },
+};
+
+/* RF5413/5414 mode-specific init registers */
+static const struct ath5k_ini_rf rfregs_5413[] = {
+        { 1, 0x98d4,
+        /*    mode a/XR   mode aTurbo mode b      mode g      mode gTurbo */
+            { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
+        { 2, 0x98d0,
+            { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } },
+        { 3, 0x98dc,
+            { 0x00a000c0, 0x00a000c0, 0x00e000c0, 0x00e000c0, 0x00e000c0 } },
+        { 6, 0x989c,
+            { 0x33000000, 0x33000000, 0x33000000, 0x33000000, 0x33000000 } },
+        { 6, 0x989c,
+            { 0x01000000, 0x01000000, 0x01000000, 0x01000000, 0x01000000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000 } },
+        { 6, 0x989c,
+            { 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000 } },
+        { 6, 0x989c,
+            { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } },
+        { 6, 0x989c,
+            { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } },
+        { 6, 0x989c,
+            { 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000 } },
+        { 6, 0x989c,
+            { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+        { 6, 0x989c,
+            { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+        { 6, 0x989c,
+            { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+        { 6, 0x989c,
+            { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+        { 6, 0x989c,
+            { 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000 } },
+        { 6, 0x989c,
+            { 0x00610000, 0x00610000, 0x00610000, 0x00610000, 0x00610000 } },
+        { 6, 0x989c,
+            { 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000 } },
+        { 6, 0x989c,
+            { 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000 } },
+        { 6, 0x989c,
+            { 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000 } },
+        { 6, 0x989c,
+            { 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000 } },
+        { 6, 0x989c,
+            { 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } },
+        { 6, 0x989c,
+            { 0x00440000, 0x00440000, 0x00440000, 0x00440000, 0x00440000 } },
+        { 6, 0x989c,
+            { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } },
+        { 6, 0x989c,
+            { 0x00100080, 0x00100080, 0x00100080, 0x00100080, 0x00100080 } },
+        { 6, 0x989c,
+            { 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034 } },
+        { 6, 0x989c,
+            { 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0 } },
+        { 6, 0x989c,
+            { 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f } },
+        { 6, 0x989c,
+            { 0x00510040, 0x00510040, 0x005100a0, 0x005100a0, 0x005100a0 } },
+        { 6, 0x989c,
+            { 0x0050006a, 0x0050006a, 0x005000dd, 0x005000dd, 0x005000dd } },
+        { 6, 0x989c,
+            { 0x00000001, 0x00000001, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x00004044, 0x00004044, 0x00004044, 0x00004044, 0x00004044 } },
+        { 6, 0x989c,
+            { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+        { 6, 0x989c,
+            { 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0 } },
+        { 6, 0x989c,
+            { 0x00002c00, 0x00002c00, 0x00003600, 0x00003600, 0x00003600 } },
+        { 6, 0x98c8,
+            { 0x00000403, 0x00000403, 0x00040403, 0x00040403, 0x00040403 } },
+        { 7, 0x989c,
+            { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
+        { 7, 0x989c,
+            { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
+        { 7, 0x98cc,
+            { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
+};
+
+
+/* Initial RF Gain settings for RF5112 */
+static const struct ath5k_ini_rfgain rfgain_5112[] = {
+        /*                            5Ghz      2Ghz    */
+        { AR5K_RF_GAIN(0),      { 0x00000007, 0x00000007 } },
+        { AR5K_RF_GAIN(1),      { 0x00000047, 0x00000047 } },
+        { AR5K_RF_GAIN(2),      { 0x00000087, 0x00000087 } },
+        { AR5K_RF_GAIN(3),      { 0x000001a0, 0x000001a0 } },
+        { AR5K_RF_GAIN(4),      { 0x000001e0, 0x000001e0 } },
+        { AR5K_RF_GAIN(5),      { 0x00000020, 0x00000020 } },
+        { AR5K_RF_GAIN(6),      { 0x00000060, 0x00000060 } },
+        { AR5K_RF_GAIN(7),      { 0x000001a1, 0x000001a1 } },
+        { AR5K_RF_GAIN(8),      { 0x000001e1, 0x000001e1 } },
+        { AR5K_RF_GAIN(9),      { 0x00000021, 0x00000021 } },
+        { AR5K_RF_GAIN(10),     { 0x00000061, 0x00000061 } },
+        { AR5K_RF_GAIN(11),     { 0x00000162, 0x00000162 } },
+        { AR5K_RF_GAIN(12),     { 0x000001a2, 0x000001a2 } },
+        { AR5K_RF_GAIN(13),     { 0x000001e2, 0x000001e2 } },
+        { AR5K_RF_GAIN(14),     { 0x00000022, 0x00000022 } },
+        { AR5K_RF_GAIN(15),     { 0x00000062, 0x00000062 } },
+        { AR5K_RF_GAIN(16),     { 0x00000163, 0x00000163 } },
+        { AR5K_RF_GAIN(17),     { 0x000001a3, 0x000001a3 } },
+        { AR5K_RF_GAIN(18),     { 0x000001e3, 0x000001e3 } },
+        { AR5K_RF_GAIN(19),     { 0x00000023, 0x00000023 } },
+        { AR5K_RF_GAIN(20),     { 0x00000063, 0x00000063 } },
+        { AR5K_RF_GAIN(21),     { 0x00000184, 0x00000184 } },
+        { AR5K_RF_GAIN(22),     { 0x000001c4, 0x000001c4 } },
+        { AR5K_RF_GAIN(23),     { 0x00000004, 0x00000004 } },
+        { AR5K_RF_GAIN(24),     { 0x000001ea, 0x0000000b } },
+        { AR5K_RF_GAIN(25),     { 0x0000002a, 0x0000004b } },
+        { AR5K_RF_GAIN(26),     { 0x0000006a, 0x0000008b } },
+        { AR5K_RF_GAIN(27),     { 0x000000aa, 0x000001ac } },
+        { AR5K_RF_GAIN(28),     { 0x000001ab, 0x000001ec } },
+        { AR5K_RF_GAIN(29),     { 0x000001eb, 0x0000002c } },
+        { AR5K_RF_GAIN(30),     { 0x0000002b, 0x00000012 } },
+        { AR5K_RF_GAIN(31),     { 0x0000006b, 0x00000052 } },
+        { AR5K_RF_GAIN(32),     { 0x000000ab, 0x00000092 } },
+        { AR5K_RF_GAIN(33),     { 0x000001ac, 0x00000193 } },
+        { AR5K_RF_GAIN(34),     { 0x000001ec, 0x000001d3 } },
+        { AR5K_RF_GAIN(35),     { 0x0000002c, 0x00000013 } },
+        { AR5K_RF_GAIN(36),     { 0x0000003a, 0x00000053 } },
+        { AR5K_RF_GAIN(37),     { 0x0000007a, 0x00000093 } },
+        { AR5K_RF_GAIN(38),     { 0x000000ba, 0x00000194 } },
+        { AR5K_RF_GAIN(39),     { 0x000001bb, 0x000001d4 } },
+        { AR5K_RF_GAIN(40),     { 0x000001fb, 0x00000014 } },
+        { AR5K_RF_GAIN(41),     { 0x0000003b, 0x0000003a } },
+        { AR5K_RF_GAIN(42),     { 0x0000007b, 0x0000007a } },
+        { AR5K_RF_GAIN(43),     { 0x000000bb, 0x000000ba } },
+        { AR5K_RF_GAIN(44),     { 0x000001bc, 0x000001bb } },
+        { AR5K_RF_GAIN(45),     { 0x000001fc, 0x000001fb } },
+        { AR5K_RF_GAIN(46),     { 0x0000003c, 0x0000003b } },
+        { AR5K_RF_GAIN(47),     { 0x0000007c, 0x0000007b } },
+        { AR5K_RF_GAIN(48),     { 0x000000bc, 0x000000bb } },
+        { AR5K_RF_GAIN(49),     { 0x000000fc, 0x000001bc } },
+        { AR5K_RF_GAIN(50),     { 0x000000fc, 0x000001fc } },
+        { AR5K_RF_GAIN(51),     { 0x000000fc, 0x0000003c } },
+        { AR5K_RF_GAIN(52),     { 0x000000fc, 0x0000007c } },
+        { AR5K_RF_GAIN(53),     { 0x000000fc, 0x000000bc } },
+        { AR5K_RF_GAIN(54),     { 0x000000fc, 0x000000fc } },
+        { AR5K_RF_GAIN(55),     { 0x000000fc, 0x000000fc } },
+        { AR5K_RF_GAIN(56),     { 0x000000fc, 0x000000fc } },
+        { AR5K_RF_GAIN(57),     { 0x000000fc, 0x000000fc } },
+        { AR5K_RF_GAIN(58),     { 0x000000fc, 0x000000fc } },
+        { AR5K_RF_GAIN(59),     { 0x000000fc, 0x000000fc } },
+        { AR5K_RF_GAIN(60),     { 0x000000fc, 0x000000fc } },
+        { AR5K_RF_GAIN(61),     { 0x000000fc, 0x000000fc } },
+        { AR5K_RF_GAIN(62),     { 0x000000fc, 0x000000fc } },
+        { AR5K_RF_GAIN(63),     { 0x000000fc, 0x000000fc } },
+};
+
+/* Initial RF Gain settings for RF5413 */
+static const struct ath5k_ini_rfgain rfgain_5413[] = {
+        /*                            5Ghz      2Ghz    */
+        { AR5K_RF_GAIN(0),      { 0x00000000, 0x00000000 } },
+        { AR5K_RF_GAIN(1),      { 0x00000040, 0x00000040 } },
+        { AR5K_RF_GAIN(2),      { 0x00000080, 0x00000080 } },
+        { AR5K_RF_GAIN(3),      { 0x000001a1, 0x00000161 } },
+        { AR5K_RF_GAIN(4),      { 0x000001e1, 0x000001a1 } },
+        { AR5K_RF_GAIN(5),      { 0x00000021, 0x000001e1 } },
+        { AR5K_RF_GAIN(6),      { 0x00000061, 0x00000021 } },
+        { AR5K_RF_GAIN(7),      { 0x00000188, 0x00000061 } },
+        { AR5K_RF_GAIN(8),      { 0x000001c8, 0x00000188 } },
+        { AR5K_RF_GAIN(9),      { 0x00000008, 0x000001c8 } },
+        { AR5K_RF_GAIN(10),     { 0x00000048, 0x00000008 } },
+        { AR5K_RF_GAIN(11),     { 0x00000088, 0x00000048 } },
+        { AR5K_RF_GAIN(12),     { 0x000001a9, 0x00000088 } },
+        { AR5K_RF_GAIN(13),     { 0x000001e9, 0x00000169 } },
+        { AR5K_RF_GAIN(14),     { 0x00000029, 0x000001a9 } },
+        { AR5K_RF_GAIN(15),     { 0x00000069, 0x000001e9 } },
+        { AR5K_RF_GAIN(16),     { 0x000001d0, 0x00000029 } },
+        { AR5K_RF_GAIN(17),     { 0x00000010, 0x00000069 } },
+        { AR5K_RF_GAIN(18),     { 0x00000050, 0x00000190 } },
+        { AR5K_RF_GAIN(19),     { 0x00000090, 0x000001d0 } },
+        { AR5K_RF_GAIN(20),     { 0x000001b1, 0x00000010 } },
+        { AR5K_RF_GAIN(21),     { 0x000001f1, 0x00000050 } },
+        { AR5K_RF_GAIN(22),     { 0x00000031, 0x00000090 } },
+        { AR5K_RF_GAIN(23),     { 0x00000071, 0x00000171 } },
+        { AR5K_RF_GAIN(24),     { 0x000001b8, 0x000001b1 } },
+        { AR5K_RF_GAIN(25),     { 0x000001f8, 0x000001f1 } },
+        { AR5K_RF_GAIN(26),     { 0x00000038, 0x00000031 } },
+        { AR5K_RF_GAIN(27),     { 0x00000078, 0x00000071 } },
+        { AR5K_RF_GAIN(28),     { 0x00000199, 0x00000198 } },
+        { AR5K_RF_GAIN(29),     { 0x000001d9, 0x000001d8 } },
+        { AR5K_RF_GAIN(30),     { 0x00000019, 0x00000018 } },
+        { AR5K_RF_GAIN(31),     { 0x00000059, 0x00000058 } },
+        { AR5K_RF_GAIN(32),     { 0x00000099, 0x00000098 } },
+        { AR5K_RF_GAIN(33),     { 0x000000d9, 0x00000179 } },
+        { AR5K_RF_GAIN(34),     { 0x000000f9, 0x000001b9 } },
+        { AR5K_RF_GAIN(35),     { 0x000000f9, 0x000001f9 } },
+        { AR5K_RF_GAIN(36),     { 0x000000f9, 0x00000039 } },
+        { AR5K_RF_GAIN(37),     { 0x000000f9, 0x00000079 } },
+        { AR5K_RF_GAIN(38),     { 0x000000f9, 0x000000b9 } },
+        { AR5K_RF_GAIN(39),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(40),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(41),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(42),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(43),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(44),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(45),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(46),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(47),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(48),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(49),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(50),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(51),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(52),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(53),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(54),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(55),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(56),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(57),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(58),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(59),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(60),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(61),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(62),     { 0x000000f9, 0x000000f9 } },
+        { AR5K_RF_GAIN(63),     { 0x000000f9, 0x000000f9 } },
+};
+
+static const struct ath5k_gain_opt rfgain_opt_5112 = {
+        1,
+        8,
+        {
+                { { 3, 0, 0, 0, 0, 0, 0 }, 6 },
+                { { 2, 0, 0, 0, 0, 0, 0 }, 0 },
+                { { 1, 0, 0, 0, 0, 0, 0 }, -3 },
+                { { 0, 0, 0, 0, 0, 0, 0 }, -6 },
+                { { 0, 1, 1, 0, 0, 0, 0 }, -8 },
+                { { 0, 1, 1, 0, 1, 1, 0 }, -10 },
+                { { 0, 1, 0, 1, 1, 1, 0 }, -13 },
+                { { 0, 1, 0, 1, 1, 0, 1 }, -16 },
+        }
+};
+
+/*
+ * Used to modify RF Banks before writing them to AR5K_RF_BUFFER
+ */
+static unsigned int ath5k_hw_rfregs_op(u32 *rf, u32 offset, u32 reg, u32 bits,
+                u32 first, u32 col, bool set)
+{
+        u32 mask, entry, last, data, shift, position;
+        s32 left;
+        int i;
+
+        data = 0;
+
+        if (rf == NULL)
+                /* should not happen */
+                return 0;
+
+        if (!(col <= 3 && bits <= 32 && first + bits <= 319)) {
+                ATH5K_PRINTF("invalid values at offset %u\n", offset);
+                return 0;
+        }
+
+        entry = ((first - 1) / 8) + offset;
+        position = (first - 1) % 8;
+
+        if (set == true)
+                data = ath5k_hw_bitswap(reg, bits);
+
+        for (i = shift = 0, left = bits; left > 0; position = 0, entry++, i++) {
+                last = (position + left > 8) ? 8 : position + left;
+                mask = (((1 << last) - 1) ^ ((1 << position) - 1)) << (col * 8);
+
+                if (set == true) {
+                        rf[entry] &= ~mask;
+                        rf[entry] |= ((data << position) << (col * 8)) & mask;
+                        data >>= (8 - position);
+                } else {
+                        data = (((rf[entry] & mask) >> (col * 8)) >> position)
+                                << shift;
+                        shift += last - position;
+                }
+
+                left -= 8 - position;
+        }
+
+        data = set == true ? 1 : ath5k_hw_bitswap(data, bits);
+
+        return data;
+}
+
+static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah)
+{
+        u32 mix, step;
+        u32 *rf;
+
+        if (ah->ah_rf_banks == NULL)
+                return 0;
+
+        rf = ah->ah_rf_banks;
+        ah->ah_gain.g_f_corr = 0;
+
+        if (ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0, false) != 1)
+                return 0;
+
+        step = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 4, 32, 0, false);
+        mix = ah->ah_gain.g_step->gos_param[0];
+
+        switch (mix) {
+        case 3:
+                ah->ah_gain.g_f_corr = step * 2;
+                break;
+        case 2:
+                ah->ah_gain.g_f_corr = (step - 5) * 2;
+                break;
+        case 1:
+                ah->ah_gain.g_f_corr = step;
+                break;
+        default:
+                ah->ah_gain.g_f_corr = 0;
+                break;
+        }
+
+        return ah->ah_gain.g_f_corr;
+}
+
+static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah)
+{
+        u32 step, mix, level[4];
+        u32 *rf;
+
+        if (ah->ah_rf_banks == NULL)
+                return false;
+
+        rf = ah->ah_rf_banks;
+
+        if (ah->ah_radio == AR5K_RF5111) {
+                step = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 6, 37, 0,
+                                false);
+                level[0] = 0;
+                level[1] = (step == 0x3f) ? 0x32 : step + 4;
+                level[2] = (step != 0x3f) ? 0x40 : level[0];
+                level[3] = level[2] + 0x32;
+
+                ah->ah_gain.g_high = level[3] -
+                        (step == 0x3f ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5);
+                ah->ah_gain.g_low = level[0] +
+                        (step == 0x3f ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0);
+        } else {
+                mix = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0,
+                                false);
+                level[0] = level[2] = 0;
+
+                if (mix == 1) {
+                        level[1] = level[3] = 83;
+                } else {
+                        level[1] = level[3] = 107;
+                        ah->ah_gain.g_high = 55;
+                }
+        }
+
+        return (ah->ah_gain.g_current >= level[0] &&
+                        ah->ah_gain.g_current <= level[1]) ||
+                (ah->ah_gain.g_current >= level[2] &&
+                        ah->ah_gain.g_current <= level[3]);
+}
+
+static s32 ath5k_hw_rfregs_gain_adjust(struct ath5k_hw *ah)
+{
+        const struct ath5k_gain_opt *go;
+        int ret = 0;
+
+        switch (ah->ah_radio) {
+        case AR5K_RF5111:
+                go = &rfgain_opt_5111;
+                break;
+        case AR5K_RF5112:
+        case AR5K_RF5413: /* ??? */
+                go = &rfgain_opt_5112;
+                break;
+        default:
+                return 0;
+        }
+
+        ah->ah_gain.g_step = &go->go_step[ah->ah_gain.g_step_idx];
+
+        if (ah->ah_gain.g_current >= ah->ah_gain.g_high) {
+                if (ah->ah_gain.g_step_idx == 0)
+                        return -1;
+                for (ah->ah_gain.g_target = ah->ah_gain.g_current;
+                                ah->ah_gain.g_target >=  ah->ah_gain.g_high &&
+                                ah->ah_gain.g_step_idx > 0;
+                                ah->ah_gain.g_step =
+                                        &go->go_step[ah->ah_gain.g_step_idx])
+                        ah->ah_gain.g_target -= 2 *
+                            (go->go_step[--(ah->ah_gain.g_step_idx)].gos_gain -
+                            ah->ah_gain.g_step->gos_gain);
+
+                ret = 1;
+                goto done;
+        }
+
+        if (ah->ah_gain.g_current <= ah->ah_gain.g_low) {
+                if (ah->ah_gain.g_step_idx == (go->go_steps_count - 1))
+                        return -2;
+                for (ah->ah_gain.g_target = ah->ah_gain.g_current;
+                                ah->ah_gain.g_target <= ah->ah_gain.g_low &&
+                                ah->ah_gain.g_step_idx < go->go_steps_count-1;
+                                ah->ah_gain.g_step =
+                                        &go->go_step[ah->ah_gain.g_step_idx])
+                        ah->ah_gain.g_target -= 2 *
+                            (go->go_step[++ah->ah_gain.g_step_idx].gos_gain -
+                            ah->ah_gain.g_step->gos_gain);
+
+                ret = 2;
+                goto done;
+        }
+
+done:
+        ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+                "ret %d, gain step %u, current gain %u, target gain %u\n",
+                ret, ah->ah_gain.g_step_idx, ah->ah_gain.g_current,
+                ah->ah_gain.g_target);
+
+        return ret;
+}
+
+/*
+ * Read EEPROM Calibration data, modify RF Banks and Initialize RF5111
+ */
+static int ath5k_hw_rf5111_rfregs(struct ath5k_hw *ah,
+                struct ieee80211_channel *channel, unsigned int mode)
+{
+        struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+        u32 *rf;
+        const unsigned int rf_size = ARRAY_SIZE(rfregs_5111);
+        unsigned int i;
+        int obdb = -1, bank = -1;
+        u32 ee_mode;
+
+        AR5K_ASSERT_ENTRY(mode, AR5K_INI_VAL_MAX);
+
+        rf = ah->ah_rf_banks;
+
+        /* Copy values to modify them */
+        for (i = 0; i < rf_size; i++) {
+                if (rfregs_5111[i].rf_bank >= AR5K_RF5111_INI_RF_MAX_BANKS) {
+                        ATH5K_ERR(ah->ah_sc, "invalid bank\n");
+                        return -EINVAL;
+                }
+
+                if (bank != rfregs_5111[i].rf_bank) {
+                        bank = rfregs_5111[i].rf_bank;
+                        ah->ah_offset[bank] = i;
+                }
+
+                rf[i] = rfregs_5111[i].rf_value[mode];
+        }
+
+        /* Modify bank 0 */
+        if (channel->val & CHANNEL_2GHZ) {
+                if (channel->val & CHANNEL_CCK)
+                        ee_mode = AR5K_EEPROM_MODE_11B;
+                else
+                        ee_mode = AR5K_EEPROM_MODE_11G;
+                obdb = 0;
+
+                if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[0],
+                                ee->ee_ob[ee_mode][obdb], 3, 119, 0, true))
+                        return -EINVAL;
+
+                if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[0],
+                                ee->ee_ob[ee_mode][obdb], 3, 122, 0, true))
+                        return -EINVAL;
+
+                obdb = 1;
+        /* Modify bank 6 */
+        } else {
+                /* For 11a, Turbo and XR */
+                ee_mode = AR5K_EEPROM_MODE_11A;
+                obdb =   channel->freq >= 5725 ? 3 :
+                        (channel->freq >= 5500 ? 2 :
+                        (channel->freq >= 5260 ? 1 :
+                         (channel->freq > 4000 ? 0 : -1)));
+
+                if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
+                                ee->ee_pwd_84, 1, 51, 3, true))
+                        return -EINVAL;
+
+                if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
+                                ee->ee_pwd_90, 1, 45, 3, true))
+                        return -EINVAL;
+        }
+
+        if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
+                        !ee->ee_xpd[ee_mode], 1, 95, 0, true))
+                return -EINVAL;
+
+        if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
+                        ee->ee_x_gain[ee_mode], 4, 96, 0, true))
+                return -EINVAL;
+
+        if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], obdb >= 0 ?
+                        ee->ee_ob[ee_mode][obdb] : 0, 3, 104, 0, true))
+                return -EINVAL;
+
+        if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], obdb >= 0 ?
+                        ee->ee_db[ee_mode][obdb] : 0, 3, 107, 0, true))
+                return -EINVAL;
+
+        /* Modify bank 7 */
+        if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7],
+                        ee->ee_i_gain[ee_mode], 6, 29, 0, true))
+                return -EINVAL;
+
+        if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7],
+                        ee->ee_xpd[ee_mode], 1, 4, 0, true))
+                return -EINVAL;
+
+        /* Write RF values */
+        for (i = 0; i < rf_size; i++) {
+                AR5K_REG_WAIT(i);
+                ath5k_hw_reg_write(ah, rf[i], rfregs_5111[i].rf_register);
+        }
+
+        return 0;
+}
+
+/*
+ * Read EEPROM Calibration data, modify RF Banks and Initialize RF5112
+ */
+static int ath5k_hw_rf5112_rfregs(struct ath5k_hw *ah,
+                struct ieee80211_channel *channel, unsigned int mode)
+{
+        const struct ath5k_ini_rf *rf_ini;
+        struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+        u32 *rf;
+        unsigned int rf_size, i;
+        int obdb = -1, bank = -1;
+        u32 ee_mode;
+
+        AR5K_ASSERT_ENTRY(mode, AR5K_INI_VAL_MAX);
+
+        rf = ah->ah_rf_banks;
+
+        if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_2112A
+                && !test_bit(MODE_IEEE80211A, ah->ah_capabilities.cap_mode)){
+                rf_ini = rfregs_2112a;
+                rf_size = ARRAY_SIZE(rfregs_5112a);
+                if (mode < 2) {
+                        ATH5K_ERR(ah->ah_sc,"invalid channel mode: %i\n",mode);
+                        return -EINVAL;
+                }
+                mode = mode - 2; /*no a/turboa modes for 2112*/
+        } else if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) {
+                rf_ini = rfregs_5112a;
+                rf_size = ARRAY_SIZE(rfregs_5112a);
+        } else {
+                rf_ini = rfregs_5112;
+                rf_size = ARRAY_SIZE(rfregs_5112);
+        }
+
+        /* Copy values to modify them */
+        for (i = 0; i < rf_size; i++) {
+                if (rf_ini[i].rf_bank >= AR5K_RF5112_INI_RF_MAX_BANKS) {
+                        ATH5K_ERR(ah->ah_sc, "invalid bank\n");
+                        return -EINVAL;
+                }
+
+                if (bank != rf_ini[i].rf_bank) {
+                        bank = rf_ini[i].rf_bank;
+                        ah->ah_offset[bank] = i;
+                }
+
+                rf[i] = rf_ini[i].rf_value[mode];
+        }
+
+        /* Modify bank 6 */
+        if (channel->val & CHANNEL_2GHZ) {
+                if (channel->val & CHANNEL_OFDM)
+                        ee_mode = AR5K_EEPROM_MODE_11G;
+                else
+                        ee_mode = AR5K_EEPROM_MODE_11B;
+                obdb = 0;
+
+                if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
+                                ee->ee_ob[ee_mode][obdb], 3, 287, 0, true))
+                        return -EINVAL;
+
+                if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
+                                ee->ee_ob[ee_mode][obdb], 3, 290, 0, true))
+                        return -EINVAL;
+        } else {
+                /* For 11a, Turbo and XR */
+                ee_mode = AR5K_EEPROM_MODE_11A;
+                obdb = channel->freq >= 5725 ? 3 :
+                    (channel->freq >= 5500 ? 2 :
+                        (channel->freq >= 5260 ? 1 :
+                            (channel->freq > 4000 ? 0 : -1)));
+
+                if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
+                                ee->ee_ob[ee_mode][obdb], 3, 279, 0, true))
+                        return -EINVAL;
+
+                if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
+                                ee->ee_ob[ee_mode][obdb], 3, 282, 0, true))
+                        return -EINVAL;
+        }
+
+        ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
+            ee->ee_x_gain[ee_mode], 2, 270, 0, true);
+        ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
+            ee->ee_x_gain[ee_mode], 2, 257, 0, true);
+
+        if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6],
+                        ee->ee_xpd[ee_mode], 1, 302, 0, true))
+                return -EINVAL;
+
+        /* Modify bank 7 */
+        if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7],
+                        ee->ee_i_gain[ee_mode], 6, 14, 0, true))
+                return -EINVAL;
+
+        /* Write RF values */
+        for (i = 0; i < rf_size; i++)
+                ath5k_hw_reg_write(ah, rf[i], rf_ini[i].rf_register);
+
+        return 0;
+}
+
+/*
+ * Initialize RF5413/5414
+ */
+static int ath5k_hw_rf5413_rfregs(struct ath5k_hw *ah,
+                struct ieee80211_channel *channel, unsigned int mode)
+{
+        const struct ath5k_ini_rf *rf_ini;
+        u32 *rf;
+        unsigned int rf_size, i;
+        int bank = -1;
+
+        AR5K_ASSERT_ENTRY(mode, AR5K_INI_VAL_MAX);
+
+        rf = ah->ah_rf_banks;
+
+        rf_ini = rfregs_5413;
+        rf_size = ARRAY_SIZE(rfregs_5413);
+
+        /* Copy values to modify them */
+        for (i = 0; i < rf_size; i++) {
+                if (rf_ini[i].rf_bank >= AR5K_RF5112_INI_RF_MAX_BANKS) {
+                        ATH5K_ERR(ah->ah_sc, "invalid bank\n");
+                        return -EINVAL;
+                }
+
+                if (bank != rf_ini[i].rf_bank) {
+                        bank = rf_ini[i].rf_bank;
+                        ah->ah_offset[bank] = i;
+                }
+
+                rf[i] = rf_ini[i].rf_value[mode];
+        }
+
+        /*
+         * After compairing dumps from different cards
+         * we get the same RF_BUFFER settings (diff returns
+         * 0 lines). It seems that RF_BUFFER settings are static
+         * and are written unmodified (no EEPROM stuff
+         * is used because calibration data would be
+         * different between different cards and would result
+         * different RF_BUFFER settings)
+         */
+
+        /* Write RF values */
+        for (i = 0; i < rf_size; i++)
+                ath5k_hw_reg_write(ah, rf[i], rf_ini[i].rf_register);
+
+        return 0;
+}
+
+/*
+ * Initialize RF
+ */
+int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+                unsigned int mode)
+{
+        int (*func)(struct ath5k_hw *, struct ieee80211_channel *, unsigned int);
+        int ret;
+
+        switch (ah->ah_radio) {
+        case AR5K_RF5111:
+                ah->ah_rf_banks_size = sizeof(rfregs_5111);
+                func = ath5k_hw_rf5111_rfregs;
+                break;
+        case AR5K_RF5112:
+                if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A)
+                        ah->ah_rf_banks_size = sizeof(rfregs_5112a);
+                else
+                        ah->ah_rf_banks_size = sizeof(rfregs_5112);
+                func = ath5k_hw_rf5112_rfregs;
+                break;
+        case AR5K_RF5413:
+                ah->ah_rf_banks_size = sizeof(rfregs_5413);
+                func = ath5k_hw_rf5413_rfregs;
+                break;
+        default:
+                return -EINVAL;
+        }
+
+        if (ah->ah_rf_banks == NULL) {
+                /* XXX do extra checks? */
+                ah->ah_rf_banks = kmalloc(ah->ah_rf_banks_size, GFP_KERNEL);
+                if (ah->ah_rf_banks == NULL) {
+                        ATH5K_ERR(ah->ah_sc, "out of memory\n");
+                        return -ENOMEM;
+                }
+        }
+
+        ret = func(ah, channel, mode);
+        if (!ret)
+                ah->ah_rf_gain = AR5K_RFGAIN_INACTIVE;
+
+        return ret;
+}
+
+int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq)
+{
+        const struct ath5k_ini_rfgain *ath5k_rfg;
+        unsigned int i, size;
+
+        switch (ah->ah_radio) {
+        case AR5K_RF5111:
+                ath5k_rfg = rfgain_5111;
+                size = ARRAY_SIZE(rfgain_5111);
+                break;
+        case AR5K_RF5112:
+                ath5k_rfg = rfgain_5112;
+                size = ARRAY_SIZE(rfgain_5112);
+                break;
+        case AR5K_RF5413:
+                ath5k_rfg = rfgain_5413;
+                size = ARRAY_SIZE(rfgain_5413);
+                break;
+        default:
+                return -EINVAL;
+        }
+
+        switch (freq) {
+        case AR5K_INI_RFGAIN_2GHZ:
+        case AR5K_INI_RFGAIN_5GHZ:
+                break;
+        default:
+                return -EINVAL;
+        }
+
+        for (i = 0; i < size; i++) {
+                AR5K_REG_WAIT(i);
+                ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq],
+                        (u32)ath5k_rfg[i].rfg_register);
+        }
+
+        return 0;
+}
+
+enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah)
+{
+        u32 data, type;
+
+        ATH5K_TRACE(ah->ah_sc);
+
+        if (ah->ah_rf_banks == NULL || !ah->ah_gain.g_active ||
+                        ah->ah_version <= AR5K_AR5211)
+                return AR5K_RFGAIN_INACTIVE;
+
+        if (ah->ah_rf_gain != AR5K_RFGAIN_READ_REQUESTED)
+                goto done;
+
+        data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE);
+
+        if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) {
+                ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S;
+                type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE);
+
+                if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK)
+                        ah->ah_gain.g_current += AR5K_GAIN_CCK_PROBE_CORR;
+
+                if (ah->ah_radio >= AR5K_RF5112) {
+                        ath5k_hw_rfregs_gainf_corr(ah);
+                        ah->ah_gain.g_current =
+                                ah->ah_gain.g_current>=ah->ah_gain.g_f_corr ?
+                                (ah->ah_gain.g_current-ah->ah_gain.g_f_corr) :
+                                0;
+                }
+
+                if (ath5k_hw_rfregs_gain_readback(ah) &&
+                                AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) &&
+                                ath5k_hw_rfregs_gain_adjust(ah))
+                        ah->ah_rf_gain = AR5K_RFGAIN_NEED_CHANGE;
+        }
+
+done:
+        return ah->ah_rf_gain;
+}
+
+int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah)
+{
+        /* Initialize the gain optimization values */
+        switch (ah->ah_radio) {
+        case AR5K_RF5111:
+                ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default;
+                ah->ah_gain.g_step =
+                    &rfgain_opt_5111.go_step[ah->ah_gain.g_step_idx];
+                ah->ah_gain.g_low = 20;
+                ah->ah_gain.g_high = 35;
+                ah->ah_gain.g_active = 1;
+                break;
+        case AR5K_RF5112:
+        case AR5K_RF5413: /* ??? */
+                ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default;
+                ah->ah_gain.g_step =
+                    &rfgain_opt_5112.go_step[ah->ah_gain.g_step_idx];
+                ah->ah_gain.g_low = 20;
+                ah->ah_gain.g_high = 85;
+                ah->ah_gain.g_active = 1;
+                break;
+        default:
+                return -EINVAL;
+        }
+
+        return 0;
+}
+
+/**************************\
+  PHY/RF channel functions
+\**************************/
+
+/*
+ * Check if a channel is supported
+ */
+bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags)
+{
+        /* Check if the channel is in our supported range */
+        if (flags & CHANNEL_2GHZ) {
+                if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) &&
+                    (freq <= ah->ah_capabilities.cap_range.range_2ghz_max))
+                        return true;
+        } else if (flags & CHANNEL_5GHZ)
+                if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) &&
+                    (freq <= ah->ah_capabilities.cap_range.range_5ghz_max))
+                        return true;
+
+        return false;
+}
+
+/*
+ * Convertion needed for RF5110
+ */
+static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel)
+{
+        u32 athchan;
+
+        /*
+         * Convert IEEE channel/MHz to an internal channel value used
+         * by the AR5210 chipset. This has not been verified with
+         * newer chipsets like the AR5212A who have a completely
+         * different RF/PHY part.
+         */
+        athchan = (ath5k_hw_bitswap((channel->chan - 24) / 2, 5) << 1) |
+                (1 << 6) | 0x1;
+
+        return athchan;
+}
+
+/*
+ * Set channel on RF5110
+ */
+static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah,
+                struct ieee80211_channel *channel)
+{
+        u32 data;
+
+        /*
+         * Set the channel and wait
+         */
+        data = ath5k_hw_rf5110_chan2athchan(channel);
+        ath5k_hw_reg_write(ah, data, AR5K_RF_BUFFER);
+        ath5k_hw_reg_write(ah, 0, AR5K_RF_BUFFER_CONTROL_0);
+        mdelay(1);
+
+        return 0;
+}
+
+/*
+ * Convertion needed for 5111
+ */
+static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee,
+                struct ath5k_athchan_2ghz *athchan)
+{
+        int channel;
+
+        /* Cast this value to catch negative channel numbers (>= -19) */
+        channel = (int)ieee;
+
+        /*
+         * Map 2GHz IEEE channel to 5GHz Atheros channel
+         */
+        if (channel <= 13) {
+                athchan->a2_athchan = 115 + channel;
+                athchan->a2_flags = 0x46;
+        } else if (channel == 14) {
+                athchan->a2_athchan = 124;
+                athchan->a2_flags = 0x44;
+        } else if (channel >= 15 && channel <= 26) {
+                athchan->a2_athchan = ((channel - 14) * 4) + 132;
+                athchan->a2_flags = 0x46;
+        } else
+                return -EINVAL;
+
+        return 0;
+}
+
+/*
+ * Set channel on 5111
+ */
+static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah,
+                struct ieee80211_channel *channel)
+{
+        struct ath5k_athchan_2ghz ath5k_channel_2ghz;
+        unsigned int ath5k_channel = channel->chan;
+        u32 data0, data1, clock;
+        int ret;
+
+        /*
+         * Set the channel on the RF5111 radio
+         */
+        data0 = data1 = 0;
+
+        if (channel->val & CHANNEL_2GHZ) {
+                /* Map 2GHz channel to 5GHz Atheros channel ID */
+                ret = ath5k_hw_rf5111_chan2athchan(channel->chan,
+                                &ath5k_channel_2ghz);
+                if (ret)
+                        return ret;
+
+                ath5k_channel = ath5k_channel_2ghz.a2_athchan;
+                data0 = ((ath5k_hw_bitswap(ath5k_channel_2ghz.a2_flags, 8) & 0xff)
+                    << 5) | (1 << 4);
+        }
+
+        if (ath5k_channel < 145 || !(ath5k_channel & 1)) {
+                clock = 1;
+                data1 = ((ath5k_hw_bitswap(ath5k_channel - 24, 8) & 0xff) << 2) |
+                        (clock << 1) | (1 << 10) | 1;
+        } else {
+                clock = 0;
+                data1 = ((ath5k_hw_bitswap((ath5k_channel - 24) / 2, 8) & 0xff)
+                        << 2) | (clock << 1) | (1 << 10) | 1;
+        }
+
+        ath5k_hw_reg_write(ah, (data1 & 0xff) | ((data0 & 0xff) << 8),
+                        AR5K_RF_BUFFER);
+        ath5k_hw_reg_write(ah, ((data1 >> 8) & 0xff) | (data0 & 0xff00),
+                        AR5K_RF_BUFFER_CONTROL_3);
+
+        return 0;
+}
+
+/*
+ * Set channel on 5112 and newer
+ */
+static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
+                struct ieee80211_channel *channel)
+{
+        u32 data, data0, data1, data2;
+        u16 c;
+
+        data = data0 = data1 = data2 = 0;
+        c = channel->freq;
+
+        /*
+         * Set the channel on the RF5112 or newer
+         */
+        if (c < 4800) {
+                if (!((c - 2224) % 5)) {
+                        data0 = ((2 * (c - 704)) - 3040) / 10;
+                        data1 = 1;
+                } else if (!((c - 2192) % 5)) {
+                        data0 = ((2 * (c - 672)) - 3040) / 10;
+                        data1 = 0;
+                } else
+                        return -EINVAL;
+
+                data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8);
+        } else {
+                if (!(c % 20) && c >= 5120) {
+                        data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8);
+                        data2 = ath5k_hw_bitswap(3, 2);
+                } else if (!(c % 10)) {
+                        data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8);
+                        data2 = ath5k_hw_bitswap(2, 2);
+                } else if (!(c % 5)) {
+                        data0 = ath5k_hw_bitswap((c - 4800) / 5, 8);
+                        data2 = ath5k_hw_bitswap(1, 2);
+                } else
+                        return -EINVAL;
+        }
+
+        data = (data0 << 4) | (data1 << 1) | (data2 << 2) | 0x1001;
+
+        ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER);
+        ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5);
+
+        return 0;
+}
+
+/*
+ * Set a channel on the radio chip
+ */
+int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
+{
+        int ret;
+
+        /*
+         * Check bounds supported by the PHY
+         * (don't care about regulation restrictions at this point)
+         */
+        if ((channel->freq < ah->ah_capabilities.cap_range.range_2ghz_min ||
+            channel->freq > ah->ah_capabilities.cap_range.range_2ghz_max) &&
+            (channel->freq < ah->ah_capabilities.cap_range.range_5ghz_min ||
+            channel->freq > ah->ah_capabilities.cap_range.range_5ghz_max)) {
+                ATH5K_ERR(ah->ah_sc,
+                        "channel out of supported range (%u MHz)\n",
+                        channel->freq);
+                return -EINVAL;
+        }
+
+        /*
+         * Set the channel and wait
+         */
+        switch (ah->ah_radio) {
+        case AR5K_RF5110:
+                ret = ath5k_hw_rf5110_channel(ah, channel);
+                break;
+        case AR5K_RF5111:
+                ret = ath5k_hw_rf5111_channel(ah, channel);
+                break;
+        default:
+                ret = ath5k_hw_rf5112_channel(ah, channel);
+                break;
+        }
+
+        if (ret)
+                return ret;
+
+        ah->ah_current_channel.freq = channel->freq;
+        ah->ah_current_channel.val = channel->val;
+        ah->ah_turbo = channel->val == CHANNEL_T ? true : false;
+
+        return 0;
+}
+
+/*****************\
+  PHY calibration
+\*****************/
+
+/**
+ * ath5k_hw_noise_floor_calibration - perform PHY noise floor calibration
+ *
+ * @ah: struct ath5k_hw pointer we are operating on
+ * @freq: the channel frequency, just used for error logging
+ *
+ * This function performs a noise floor calibration of the PHY and waits for
+ * it to complete. Then the noise floor value is compared to some maximum
+ * noise floor we consider valid.
+ *
+ * Note that this is different from what the madwifi HAL does: it reads the
+ * noise floor and afterwards initiates the calibration. Since the noise floor
+ * calibration can take some time to finish, depending on the current channel
+ * use, that avoids the occasional timeout warnings we are seeing now.
+ *
+ * See the following link for an Atheros patent on noise floor calibration:
+ * http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL \
+ * &p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7245893.PN.&OS=PN/7
+ *
+ */
+int
+ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
+{
+        int ret;
+        unsigned int i;
+        s32 noise_floor;
+
+        /*
+         * Enable noise floor calibration and wait until completion
+         */
+        AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+                                AR5K_PHY_AGCCTL_NF);
+
+        ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+                        AR5K_PHY_AGCCTL_NF, 0, false);
+        if (ret) {
+                ATH5K_ERR(ah->ah_sc,
+                        "noise floor calibration timeout (%uMHz)\n", freq);
+                return ret;
+        }
+
+        /* Wait until the noise floor is calibrated and read the value */
+        for (i = 20; i > 0; i--) {
+                mdelay(1);
+                noise_floor = ath5k_hw_reg_read(ah, AR5K_PHY_NF);
+                noise_floor = AR5K_PHY_NF_RVAL(noise_floor);
+                if (noise_floor & AR5K_PHY_NF_ACTIVE) {
+                        noise_floor = AR5K_PHY_NF_AVAL(noise_floor);
+
+                        if (noise_floor <= AR5K_TUNE_NOISE_FLOOR)
+                                break;
+                }
+        }
+
+        ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+                "noise floor %d\n", noise_floor);
+
+        if (noise_floor > AR5K_TUNE_NOISE_FLOOR) {
+                ATH5K_ERR(ah->ah_sc,
+                        "noise floor calibration failed (%uMHz)\n", freq);
+                return -EIO;
+        }
+
+        ah->ah_noise_floor = noise_floor;
+
+        return 0;
+}
+
+/*
+ * Perform a PHY calibration on RF5110
+ * -Fix BPSK/QAM Constellation (I/Q correction)
+ * -Calculate Noise Floor
+ */
+static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
+                struct ieee80211_channel *channel)
+{
+        u32 phy_sig, phy_agc, phy_sat, beacon;
+        int ret;
+
+        /*
+         * Disable beacons and RX/TX queues, wait
+         */
+        AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5210,
+                AR5K_DIAG_SW_DIS_TX | AR5K_DIAG_SW_DIS_RX_5210);
+        beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210);
+        ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210);
+
+        udelay(2300);
+
+        /*
+         * Set the channel (with AGC turned off)
+         */
+        AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
+        udelay(10);
+        ret = ath5k_hw_channel(ah, channel);
+
+        /*
+         * Activate PHY and wait
+         */
+        ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
+        mdelay(1);
+
+        AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
+
+        if (ret)
+                return ret;
+
+        /*
+         * Calibrate the radio chip
+         */
+
+        /* Remember normal state */
+        phy_sig = ath5k_hw_reg_read(ah, AR5K_PHY_SIG);
+        phy_agc = ath5k_hw_reg_read(ah, AR5K_PHY_AGCCOARSE);
+        phy_sat = ath5k_hw_reg_read(ah, AR5K_PHY_ADCSAT);
+
+        /* Update radio registers */
+        ath5k_hw_reg_write(ah, (phy_sig & ~(AR5K_PHY_SIG_FIRPWR)) |
+                AR5K_REG_SM(-1, AR5K_PHY_SIG_FIRPWR), AR5K_PHY_SIG);
+
+        ath5k_hw_reg_write(ah, (phy_agc & ~(AR5K_PHY_AGCCOARSE_HI |
+                        AR5K_PHY_AGCCOARSE_LO)) |
+                AR5K_REG_SM(-1, AR5K_PHY_AGCCOARSE_HI) |
+                AR5K_REG_SM(-127, AR5K_PHY_AGCCOARSE_LO), AR5K_PHY_AGCCOARSE);
+
+        ath5k_hw_reg_write(ah, (phy_sat & ~(AR5K_PHY_ADCSAT_ICNT |
+                        AR5K_PHY_ADCSAT_THR)) |
+                AR5K_REG_SM(2, AR5K_PHY_ADCSAT_ICNT) |
+                AR5K_REG_SM(12, AR5K_PHY_ADCSAT_THR), AR5K_PHY_ADCSAT);
+
+        udelay(20);
+
+        AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
+        udelay(10);
+        ath5k_hw_reg_write(ah, AR5K_PHY_RFSTG_DISABLE, AR5K_PHY_RFSTG);
+        AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
+
+        mdelay(1);
+
+        /*
+         * Enable calibration and wait until completion
+         */
+        AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_CAL);
+
+        ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+                        AR5K_PHY_AGCCTL_CAL, 0, false);
+
+        /* Reset to normal state */
+        ath5k_hw_reg_write(ah, phy_sig, AR5K_PHY_SIG);
+        ath5k_hw_reg_write(ah, phy_agc, AR5K_PHY_AGCCOARSE);
+        ath5k_hw_reg_write(ah, phy_sat, AR5K_PHY_ADCSAT);
+
+        if (ret) {
+                ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n",
+                                channel->freq);
+                return ret;
+        }
+
+        ret = ath5k_hw_noise_floor_calibration(ah, channel->freq);
+        if (ret)
+                return ret;
+
+        /*
+         * Re-enable RX/TX and beacons
+         */
+        AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5210,
+                AR5K_DIAG_SW_DIS_TX | AR5K_DIAG_SW_DIS_RX_5210);
+        ath5k_hw_reg_write(ah, beacon, AR5K_BEACON_5210);
+
+        return 0;
+}
+
+/*
+ * Perform a PHY calibration on RF5111/5112
+ */
+static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah,
+                struct ieee80211_channel *channel)
+{
+        u32 i_pwr, q_pwr;
+        s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd;
+        ATH5K_TRACE(ah->ah_sc);
+
+        if (ah->ah_calibration == false ||
+                        ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN)
+                goto done;
+
+        ah->ah_calibration = false;
+
+        iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR);
+        i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I);
+        q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q);
+        i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7;
+        q_coffd = q_pwr >> 6;
+
+        if (i_coffd == 0 || q_coffd == 0)
+                goto done;
+
+        i_coff = ((-iq_corr) / i_coffd) & 0x3f;
+        q_coff = (((s32)i_pwr / q_coffd) - 64) & 0x1f;
+
+        /* Commit new IQ value */
+        AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE |
+                ((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S));
+
+done:
+        ath5k_hw_noise_floor_calibration(ah, channel->freq);
+
+        /* Request RF gain */
+        if (channel->val & CHANNEL_5GHZ) {
+                ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max,
+                        AR5K_PHY_PAPD_PROBE_TXPOWER) |
+                        AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);
+                ah->ah_rf_gain = AR5K_RFGAIN_READ_REQUESTED;
+        }
+
+        return 0;
+}
+
+/*
+ * Perform a PHY calibration
+ */
+int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
+                struct ieee80211_channel *channel)
+{
+        int ret;
+
+        if (ah->ah_radio == AR5K_RF5110)
+                ret = ath5k_hw_rf5110_calibrate(ah, channel);
+        else
+                ret = ath5k_hw_rf511x_calibrate(ah, channel);
+
+        return ret;
+}
+
+int ath5k_hw_phy_disable(struct ath5k_hw *ah)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        /*Just a try M.F.*/
+        ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
+
+        return 0;
+}
+
+/********************\
+  Misc PHY functions
+\********************/
+
+/*
+ * Get the PHY Chip revision
+ */
+u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan)
+{
+        unsigned int i;
+        u32 srev;
+        u16 ret;
+
+        ATH5K_TRACE(ah->ah_sc);
+
+        /*
+         * Set the radio chip access register
+         */
+        switch (chan) {
+        case CHANNEL_2GHZ:
+                ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0));
+                break;
+        case CHANNEL_5GHZ:
+                ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+                break;
+        default:
+                return 0;
+        }
+
+        mdelay(2);
+
+        /* ...wait until PHY is ready and read the selected radio revision */
+        ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34));
+
+        for (i = 0; i < 8; i++)
+                ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20));
+
+        if (ah->ah_version == AR5K_AR5210) {
+                srev = ath5k_hw_reg_read(ah, AR5K_PHY(256) >> 28) & 0xf;
+                ret = (u16)ath5k_hw_bitswap(srev, 4) + 1;
+        } else {
+                srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff;
+                ret = (u16)ath5k_hw_bitswap(((srev & 0xf0) >> 4) |
+                                ((srev & 0x0f) << 4), 8);
+        }
+
+        /* Reset to the 5GHz mode */
+        ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+
+        return ret;
+}
+
+void /*TODO:Boundary check*/
+ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        /*Just a try M.F.*/
+        if (ah->ah_version != AR5K_AR5210)
+                ath5k_hw_reg_write(ah, ant, AR5K_DEFAULT_ANTENNA);
+}
+
+unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah)
+{
+        ATH5K_TRACE(ah->ah_sc);
+        /*Just a try M.F.*/
+        if (ah->ah_version != AR5K_AR5210)
+                return ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
+
+        return false; /*XXX: What do we return for 5210 ?*/
+}
+
+/*
+ * TX power setup
+ */
+
+/*
+ * Initialize the tx power table (not fully implemented)
+ */
+static void ath5k_txpower_table(struct ath5k_hw *ah,
+                struct ieee80211_channel *channel, s16 max_power)
+{
+        unsigned int i, min, max, n;
+        u16 txpower, *rates;
+
+        rates = ah->ah_txpower.txp_rates;
+
+        txpower = AR5K_TUNE_DEFAULT_TXPOWER * 2;
+        if (max_power > txpower)
+                txpower = max_power > AR5K_TUNE_MAX_TXPOWER ?
+                    AR5K_TUNE_MAX_TXPOWER : max_power;
+
+        for (i = 0; i < AR5K_MAX_RATES; i++)
+                rates[i] = txpower;
+
+        /* XXX setup target powers by rate */
+
+        ah->ah_txpower.txp_min = rates[7];
+        ah->ah_txpower.txp_max = rates[0];
+        ah->ah_txpower.txp_ofdm = rates[0];
+
+        /* Calculate the power table */
+        n = ARRAY_SIZE(ah->ah_txpower.txp_pcdac);
+        min = AR5K_EEPROM_PCDAC_START;
+        max = AR5K_EEPROM_PCDAC_STOP;
+        for (i = 0; i < n; i += AR5K_EEPROM_PCDAC_STEP)
+                ah->ah_txpower.txp_pcdac[i] =
+#ifdef notyet
+                min + ((i * (max - min)) / n);
+#else
+                min;
+#endif
+}
+
+/*
+ * Set transmition power
+ */
+int /*O.K. - txpower_table is unimplemented so this doesn't work*/
+ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+                unsigned int txpower)
+{
+        bool tpc = ah->ah_txpower.txp_tpc;
+        unsigned int i;
+
+        ATH5K_TRACE(ah->ah_sc);
+        if (txpower > AR5K_TUNE_MAX_TXPOWER) {
+                ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower);
+                return -EINVAL;
+        }
+
+        /* Reset TX power values */
+        memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
+        ah->ah_txpower.txp_tpc = tpc;
+
+        /* Initialize TX power table */
+        ath5k_txpower_table(ah, channel, txpower);
+
+        /*
+         * Write TX power values
+         */
+        for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
+                ath5k_hw_reg_write(ah,
+                        ((((ah->ah_txpower.txp_pcdac[(i << 1) + 1] << 8) | 0xff) & 0xffff) << 16) |
+                        (((ah->ah_txpower.txp_pcdac[(i << 1)    ] << 8) | 0xff) & 0xffff),
+                        AR5K_PHY_PCDAC_TXPOWER(i));
+        }
+
+        ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) |
+                AR5K_TXPOWER_OFDM(2, 16) | AR5K_TXPOWER_OFDM(1, 8) |
+                AR5K_TXPOWER_OFDM(0, 0), AR5K_PHY_TXPOWER_RATE1);
+
+        ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(7, 24) |
+                AR5K_TXPOWER_OFDM(6, 16) | AR5K_TXPOWER_OFDM(5, 8) |
+                AR5K_TXPOWER_OFDM(4, 0), AR5K_PHY_TXPOWER_RATE2);
+
+        ath5k_hw_reg_write(ah, AR5K_TXPOWER_CCK(10, 24) |
+                AR5K_TXPOWER_CCK(9, 16) | AR5K_TXPOWER_CCK(15, 8) |
+                AR5K_TXPOWER_CCK(8, 0), AR5K_PHY_TXPOWER_RATE3);
+
+        ath5k_hw_reg_write(ah, AR5K_TXPOWER_CCK(14, 24) |
+                AR5K_TXPOWER_CCK(13, 16) | AR5K_TXPOWER_CCK(12, 8) |
+                AR5K_TXPOWER_CCK(11, 0), AR5K_PHY_TXPOWER_RATE4);
+
+        if (ah->ah_txpower.txp_tpc == true)
+                ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE |
+                        AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX);
+        else
+                ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX |
+                        AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX);
+
+        return 0;
+}
+
+int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power)
+{
+        /*Just a try M.F.*/
+        struct ieee80211_channel *channel = &ah->ah_current_channel;
+
+        ATH5K_TRACE(ah->ah_sc);
+        ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER,
+                "changing txpower to %d\n", power);
+
+        return ath5k_hw_txpower(ah, channel, power);
+}
diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h
new file mode 100644
index 000000000000..2f41c8398602
--- /dev/null
+++ b/drivers/net/wireless/ath5k/reg.h
@@ -0,0 +1,1987 @@
+/*
+ * Copyright (c) 2007 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2007 Michael Taylor <mike.taylor@apprion.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*
+ * Register values for Atheros 5210/5211/5212 cards from OpenBSD's ar5k
+ * maintained by Reyk Floeter
+ *
+ * I tried to document those registers by looking at ar5k code, some
+ * 802.11 (802.11e mostly) papers and by reading various public available
+ * Atheros presentations and papers like these:
+ *
+ * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf
+ *        http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
+ *
+ * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
+ */
+
+
+
+/*====MAC DMA REGISTERS====*/
+
+/*
+ * AR5210-Specific TXDP registers
+ * 5210 has only 2 transmit queues so no DCU/QCU, just
+ * 2 transmit descriptor pointers...
+ */
+#define AR5K_NOQCU_TXDP0        0x0000          /* Queue 0 - data */
+#define AR5K_NOQCU_TXDP1        0x0004          /* Queue 1 - beacons */
+
+/*
+ * Mac Control Register
+ */
+#define AR5K_CR         0x0008                  /* Register Address */
+#define AR5K_CR_TXE0    0x00000001      /* TX Enable for queue 0 on 5210 */
+#define AR5K_CR_TXE1    0x00000002      /* TX Enable for queue 1 on 5210 */
+#define AR5K_CR_RXE     0x00000004      /* RX Enable */
+#define AR5K_CR_TXD0    0x00000008      /* TX Disable for queue 0 on 5210 */
+#define AR5K_CR_TXD1    0x00000010      /* TX Disable for queue 1 on 5210 */
+#define AR5K_CR_RXD     0x00000020      /* RX Disable */
+#define AR5K_CR_SWI     0x00000040
+
+/*
+ * RX Descriptor Pointer register
+ */
+#define AR5K_RXDP       0x000c
+
+/*
+ * Configuration and status register
+ */
+#define AR5K_CFG                0x0014                  /* Register Address */
+#define AR5K_CFG_SWTD           0x00000001      /* Byte-swap TX descriptor (for big endian archs) */
+#define AR5K_CFG_SWTB           0x00000002      /* Byte-swap TX buffer (?) */
+#define AR5K_CFG_SWRD           0x00000004      /* Byte-swap RX descriptor */
+#define AR5K_CFG_SWRB           0x00000008      /* Byte-swap RX buffer (?) */
+#define AR5K_CFG_SWRG           0x00000010      /* Byte-swap Register values (?) */
+#define AR5K_CFG_ADHOC          0x00000020      /* [5211+] */
+#define AR5K_CFG_PHY_OK         0x00000100      /* [5211+] */
+#define AR5K_CFG_EEBS           0x00000200      /* EEPROM is busy */
+#define AR5K_CFG_CLKGD          0x00000400      /* Clock gated (?) */
+#define AR5K_CFG_TXCNT          0x00007800      /* Tx frame count (?) [5210] */
+#define AR5K_CFG_TXCNT_S        11
+#define AR5K_CFG_TXFSTAT        0x00008000      /* Tx frame status (?) [5210] */
+#define AR5K_CFG_TXFSTRT        0x00010000      /* [5210] */
+#define AR5K_CFG_PCI_THRES      0x00060000      /* [5211+] */
+#define AR5K_CFG_PCI_THRES_S    17
+
+/*
+ * Interrupt enable register
+ */
+#define AR5K_IER                0x0024          /* Register Address */
+#define AR5K_IER_DISABLE        0x00000000      /* Disable card interrupts */
+#define AR5K_IER_ENABLE         0x00000001      /* Enable card interrupts */
+
+
+/*
+ * 0x0028 is Beacon Control Register on 5210
+ * and first RTS duration register on 5211
+ */
+
+/*
+ * Beacon control register [5210]
+ */
+#define AR5K_BCR                0x0028          /* Register Address */
+#define AR5K_BCR_AP             0x00000000      /* AP mode */
+#define AR5K_BCR_ADHOC          0x00000001      /* Ad-Hoc mode */
+#define AR5K_BCR_BDMAE          0x00000002      /* DMA enable */
+#define AR5K_BCR_TQ1FV          0x00000004      /* Use Queue1 for CAB traffic */
+#define AR5K_BCR_TQ1V           0x00000008      /* Use Queue1 for Beacon traffic */
+#define AR5K_BCR_BCGET          0x00000010
+
+/*
+ * First RTS duration register [5211]
+ */
+#define AR5K_RTSD0              0x0028          /* Register Address */
+#define AR5K_RTSD0_6            0x000000ff      /* 6Mb RTS duration mask (?) */
+#define AR5K_RTSD0_6_S          0               /* 6Mb RTS duration shift (?) */
+#define AR5K_RTSD0_9            0x0000ff00      /* 9Mb*/
+#define AR5K_RTSD0_9_S          8
+#define AR5K_RTSD0_12           0x00ff0000      /* 12Mb*/
+#define AR5K_RTSD0_12_S         16
+#define AR5K_RTSD0_18           0xff000000      /* 16Mb*/
+#define AR5K_RTSD0_18_S         24
+
+
+/*
+ * 0x002c is Beacon Status Register on 5210
+ * and second RTS duration register on 5211
+ */
+
+/*
+ * Beacon status register [5210]
+ *
+ * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR
+ * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning
+ * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR).
+ * So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i
+ * renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what
+ * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR.
+ */
+#define AR5K_BSR                0x002c                  /* Register Address */
+#define AR5K_BSR_BDLYSW         0x00000001      /* SW Beacon delay (?) */
+#define AR5K_BSR_BDLYDMA        0x00000002      /* DMA Beacon delay (?) */
+#define AR5K_BSR_TXQ1F          0x00000004      /* Beacon queue (1) finished */
+#define AR5K_BSR_ATIMDLY        0x00000008      /* ATIM delay (?) */
+#define AR5K_BSR_SNPADHOC       0x00000100      /* Ad-hoc mode set (?) */
+#define AR5K_BSR_SNPBDMAE       0x00000200      /* Beacon DMA enabled (?) */
+#define AR5K_BSR_SNPTQ1FV       0x00000400      /* Queue1 is used for CAB traffic (?) */
+#define AR5K_BSR_SNPTQ1V        0x00000800      /* Queue1 is used for Beacon traffic (?) */
+#define AR5K_BSR_SNAPSHOTSVALID 0x00001000      /* BCR snapshots are valid (?) */
+#define AR5K_BSR_SWBA_CNT       0x00ff0000
+
+/*
+ * Second RTS duration register [5211]
+ */
+#define AR5K_RTSD1              0x002c                  /* Register Address */
+#define AR5K_RTSD1_24           0x000000ff      /* 24Mb */
+#define AR5K_RTSD1_24_S         0
+#define AR5K_RTSD1_36           0x0000ff00      /* 36Mb */
+#define AR5K_RTSD1_36_S         8
+#define AR5K_RTSD1_48           0x00ff0000      /* 48Mb */
+#define AR5K_RTSD1_48_S         16
+#define AR5K_RTSD1_54           0xff000000      /* 54Mb */
+#define AR5K_RTSD1_54_S         24
+
+
+/*
+ * Transmit configuration register
+ */
+#define AR5K_TXCFG              0x0030                  /* Register Address */
+#define AR5K_TXCFG_SDMAMR       0x00000007      /* DMA size */
+#define AR5K_TXCFG_SDMAMR_S     0
+#define AR5K_TXCFG_B_MODE       0x00000008      /* Set b mode for 5111 (enable 2111) */
+#define AR5K_TXCFG_TXFSTP       0x00000008      /* TX DMA full Stop [5210] */
+#define AR5K_TXCFG_TXFULL       0x000003f0      /* TX Triger level mask */
+#define AR5K_TXCFG_TXFULL_S     4
+#define AR5K_TXCFG_TXFULL_0B    0x00000000
+#define AR5K_TXCFG_TXFULL_64B   0x00000010
+#define AR5K_TXCFG_TXFULL_128B  0x00000020
+#define AR5K_TXCFG_TXFULL_192B  0x00000030
+#define AR5K_TXCFG_TXFULL_256B  0x00000040
+#define AR5K_TXCFG_TXCONT_EN    0x00000080
+#define AR5K_TXCFG_DMASIZE      0x00000100      /* Flag for passing DMA size [5210] */
+#define AR5K_TXCFG_JUMBO_TXE    0x00000400      /* Enable jumbo frames transmition (?) [5211+] */
+#define AR5K_TXCFG_RTSRND       0x00001000      /* [5211+] */
+#define AR5K_TXCFG_FRMPAD_DIS   0x00002000      /* [5211+] */
+#define AR5K_TXCFG_RDY_DIS      0x00004000      /* [5211+] */
+
+/*
+ * Receive configuration register
+ */
+#define AR5K_RXCFG              0x0034                  /* Register Address */
+#define AR5K_RXCFG_SDMAMW       0x00000007      /* DMA size */
+#define AR5K_RXCFG_SDMAMW_S     0
+#define AR5K_RXCFG_DEF_ANTENNA  0x00000008      /* Default antenna */
+#define AR5K_RXCFG_ZLFDMA       0x00000010      /* Zero-length DMA */
+#define AR5K_RXCFG_JUMBO_RXE    0x00000020      /* Enable jumbo frames reception (?) [5211+] */
+#define AR5K_RXCFG_JUMBO_WRAP   0x00000040      /* Wrap jumbo frames (?) [5211+] */
+
+/*
+ * Receive jumbo descriptor last address register
+ * Only found in 5211 (?)
+ */
+#define AR5K_RXJLA              0x0038
+
+/*
+ * MIB control register
+ */
+#define AR5K_MIBC               0x0040                  /* Register Address */
+#define AR5K_MIBC_COW           0x00000001
+#define AR5K_MIBC_FMC           0x00000002      /* Freeze Mib Counters (?) */
+#define AR5K_MIBC_CMC           0x00000004      /* Clean Mib Counters (?) */
+#define AR5K_MIBC_MCS           0x00000008
+
+/*
+ * Timeout prescale register
+ */
+#define AR5K_TOPS               0x0044
+#define AR5K_TOPS_M             0x0000ffff      /* [5211+] (?) */
+
+/*
+ * Receive timeout register (no frame received)
+ */
+#define AR5K_RXNOFRM            0x0048
+#define AR5K_RXNOFRM_M          0x000003ff      /* [5211+] (?) */
+
+/*
+ * Transmit timeout register (no frame sent)
+ */
+#define AR5K_TXNOFRM            0x004c
+#define AR5K_TXNOFRM_M          0x000003ff      /* [5211+] (?) */
+#define AR5K_TXNOFRM_QCU        0x000ffc00      /* [5211+] (?) */
+
+/*
+ * Receive frame gap timeout register
+ */
+#define AR5K_RPGTO              0x0050
+#define AR5K_RPGTO_M            0x000003ff      /* [5211+] (?) */
+
+/*
+ * Receive frame count limit register
+ */
+#define AR5K_RFCNT              0x0054
+#define AR5K_RFCNT_M            0x0000001f      /* [5211+] (?) */
+#define AR5K_RFCNT_RFCL         0x0000000f      /* [5210] */
+
+/*
+ * Misc settings register
+ */
+#define AR5K_MISC               0x0058                  /* Register Address */
+#define AR5K_MISC_DMA_OBS_M     0x000001e0
+#define AR5K_MISC_DMA_OBS_S     5
+#define AR5K_MISC_MISC_OBS_M    0x00000e00
+#define AR5K_MISC_MISC_OBS_S    9
+#define AR5K_MISC_MAC_OBS_LSB_M 0x00007000
+#define AR5K_MISC_MAC_OBS_LSB_S 12
+#define AR5K_MISC_MAC_OBS_MSB_M 0x00038000
+#define AR5K_MISC_MAC_OBS_MSB_S 15
+#define AR5K_MISC_LED_DECAY     0x001c0000      /* [5210] */
+#define AR5K_MISC_LED_BLINK     0x00e00000      /* [5210] */
+
+/*
+ * QCU/DCU clock gating register (5311)
+ */
+#define AR5K_QCUDCU_CLKGT       0x005c                  /* Register Address (?) */
+#define AR5K_QCUDCU_CLKGT_QCU   0x0000ffff      /* Mask for QCU clock */
+#define AR5K_QCUDCU_CLKGT_DCU   0x07ff0000      /* Mask for DCU clock */
+
+/*
+ * Interrupt Status Registers
+ *
+ * For 5210 there is only one status register but for
+ * 5211/5212 we have one primary and 4 secondary registers.
+ * So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212.
+ * Most of these bits are common for all chipsets.
+ */
+#define AR5K_ISR                0x001c                  /* Register Address [5210] */
+#define AR5K_PISR               0x0080                  /* Register Address [5211+] */
+#define AR5K_ISR_RXOK           0x00000001      /* Frame successfuly recieved */
+#define AR5K_ISR_RXDESC         0x00000002      /* RX descriptor request */
+#define AR5K_ISR_RXERR          0x00000004      /* Receive error */
+#define AR5K_ISR_RXNOFRM        0x00000008      /* No frame received (receive timeout) */
+#define AR5K_ISR_RXEOL          0x00000010      /* Empty RX descriptor */
+#define AR5K_ISR_RXORN          0x00000020      /* Receive FIFO overrun */
+#define AR5K_ISR_TXOK           0x00000040      /* Frame successfuly transmited */
+#define AR5K_ISR_TXDESC         0x00000080      /* TX descriptor request */
+#define AR5K_ISR_TXERR          0x00000100      /* Transmit error */
+#define AR5K_ISR_TXNOFRM        0x00000200      /* No frame transmited (transmit timeout) */
+#define AR5K_ISR_TXEOL          0x00000400      /* Empty TX descriptor */
+#define AR5K_ISR_TXURN          0x00000800      /* Transmit FIFO underrun */
+#define AR5K_ISR_MIB            0x00001000      /* Update MIB counters */
+#define AR5K_ISR_SWI            0x00002000      /* Software interrupt (?) */
+#define AR5K_ISR_RXPHY          0x00004000      /* PHY error */
+#define AR5K_ISR_RXKCM          0x00008000
+#define AR5K_ISR_SWBA           0x00010000      /* Software beacon alert */
+#define AR5K_ISR_BRSSI          0x00020000
+#define AR5K_ISR_BMISS          0x00040000      /* Beacon missed */
+#define AR5K_ISR_HIUERR         0x00080000      /* Host Interface Unit error [5211+] */
+#define AR5K_ISR_BNR            0x00100000      /* Beacon not ready [5211+] */
+#define AR5K_ISR_MCABT          0x00100000      /* [5210] */
+#define AR5K_ISR_RXCHIRP        0x00200000      /* [5212+] */
+#define AR5K_ISR_SSERR          0x00200000      /* [5210] */
+#define AR5K_ISR_DPERR          0x00400000      /* [5210] */
+#define AR5K_ISR_TIM            0x00800000      /* [5210] */
+#define AR5K_ISR_BCNMISC        0x00800000      /* [5212+] */
+#define AR5K_ISR_GPIO           0x01000000      /* GPIO (rf kill)*/
+#define AR5K_ISR_QCBRORN        0x02000000      /* CBR overrun (?)  [5211+] */
+#define AR5K_ISR_QCBRURN        0x04000000      /* CBR underrun (?) [5211+] */
+#define AR5K_ISR_QTRIG          0x08000000      /* [5211+] */
+
+/*
+ * Secondary status registers [5211+] (0 - 4)
+ *
+ * I guess from the names that these give the status for each
+ * queue, that's why only masks are defined here, haven't got
+ * any info about them (couldn't find them anywhere in ar5k code).
+ */
+#define AR5K_SISR0              0x0084                  /* Register Address [5211+] */
+#define AR5K_SISR0_QCU_TXOK     0x000003ff      /* Mask for QCU_TXOK */
+#define AR5K_SISR0_QCU_TXDESC   0x03ff0000      /* Mask for QCU_TXDESC */
+
+#define AR5K_SISR1              0x0088                  /* Register Address [5211+] */
+#define AR5K_SISR1_QCU_TXERR    0x000003ff      /* Mask for QCU_TXERR */
+#define AR5K_SISR1_QCU_TXEOL    0x03ff0000      /* Mask for QCU_TXEOL */
+
+#define AR5K_SISR2              0x008c                  /* Register Address [5211+] */
+#define AR5K_SISR2_QCU_TXURN    0x000003ff      /* Mask for QCU_TXURN */
+#define AR5K_SISR2_MCABT        0x00100000
+#define AR5K_SISR2_SSERR        0x00200000
+#define AR5K_SISR2_DPERR        0x00400000
+#define AR5K_SISR2_TIM          0x01000000      /* [5212+] */
+#define AR5K_SISR2_CAB_END      0x02000000      /* [5212+] */
+#define AR5K_SISR2_DTIM_SYNC    0x04000000      /* [5212+] */
+#define AR5K_SISR2_BCN_TIMEOUT  0x08000000      /* [5212+] */
+#define AR5K_SISR2_CAB_TIMEOUT  0x10000000      /* [5212+] */
+#define AR5K_SISR2_DTIM         0x20000000      /* [5212+] */
+
+#define AR5K_SISR3              0x0090                  /* Register Address [5211+] */
+#define AR5K_SISR3_QCBRORN      0x000003ff      /* Mask for QCBRORN */
+#define AR5K_SISR3_QCBRURN      0x03ff0000      /* Mask for QCBRURN */
+
+#define AR5K_SISR4              0x0094                  /* Register Address [5211+] */
+#define AR5K_SISR4_QTRIG        0x000003ff      /* Mask for QTRIG */
+
+/*
+ * Shadow read-and-clear interrupt status registers [5211+]
+ */
+#define AR5K_RAC_PISR           0x00c0          /* Read and clear PISR */
+#define AR5K_RAC_SISR0          0x00c4          /* Read and clear SISR0 */
+#define AR5K_RAC_SISR1          0x00c8          /* Read and clear SISR1 */
+#define AR5K_RAC_SISR2          0x00cc          /* Read and clear SISR2 */
+#define AR5K_RAC_SISR3          0x00d0          /* Read and clear SISR3 */
+#define AR5K_RAC_SISR4          0x00d4          /* Read and clear SISR4 */
+
+/*
+ * Interrupt Mask Registers
+ *
+ * As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary
+ * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match.
+ */
+#define AR5K_IMR                0x0020                  /* Register Address [5210] */
+#define AR5K_PIMR               0x00a0                  /* Register Address [5211+] */
+#define AR5K_IMR_RXOK           0x00000001      /* Frame successfuly recieved*/
+#define AR5K_IMR_RXDESC         0x00000002      /* RX descriptor request*/
+#define AR5K_IMR_RXERR          0x00000004      /* Receive error*/
+#define AR5K_IMR_RXNOFRM        0x00000008      /* No frame received (receive timeout)*/
+#define AR5K_IMR_RXEOL          0x00000010      /* Empty RX descriptor*/
+#define AR5K_IMR_RXORN          0x00000020      /* Receive FIFO overrun*/
+#define AR5K_IMR_TXOK           0x00000040      /* Frame successfuly transmited*/
+#define AR5K_IMR_TXDESC         0x00000080      /* TX descriptor request*/
+#define AR5K_IMR_TXERR          0x00000100      /* Transmit error*/
+#define AR5K_IMR_TXNOFRM        0x00000200      /* No frame transmited (transmit timeout)*/
+#define AR5K_IMR_TXEOL          0x00000400      /* Empty TX descriptor*/
+#define AR5K_IMR_TXURN          0x00000800      /* Transmit FIFO underrun*/
+#define AR5K_IMR_MIB            0x00001000      /* Update MIB counters*/
+#define AR5K_IMR_SWI            0x00002000
+#define AR5K_IMR_RXPHY          0x00004000      /* PHY error*/
+#define AR5K_IMR_RXKCM          0x00008000
+#define AR5K_IMR_SWBA           0x00010000      /* Software beacon alert*/
+#define AR5K_IMR_BRSSI          0x00020000
+#define AR5K_IMR_BMISS          0x00040000      /* Beacon missed*/
+#define AR5K_IMR_HIUERR         0x00080000      /* Host Interface Unit error [5211+] */
+#define AR5K_IMR_BNR            0x00100000      /* Beacon not ready [5211+] */
+#define AR5K_IMR_MCABT          0x00100000      /* [5210] */
+#define AR5K_IMR_RXCHIRP        0x00200000      /* [5212+]*/
+#define AR5K_IMR_SSERR          0x00200000      /* [5210] */
+#define AR5K_IMR_DPERR          0x00400000      /* [5210] */
+#define AR5K_IMR_TIM            0x00800000      /* [5211+] */
+#define AR5K_IMR_BCNMISC        0x00800000      /* [5212+] */
+#define AR5K_IMR_GPIO           0x01000000      /* GPIO (rf kill)*/
+#define AR5K_IMR_QCBRORN        0x02000000      /* CBR overrun (?) [5211+] */
+#define AR5K_IMR_QCBRURN        0x04000000      /* CBR underrun (?) [5211+] */
+#define AR5K_IMR_QTRIG          0x08000000      /* [5211+] */
+
+/*
+ * Secondary interrupt mask registers [5211+] (0 - 4)
+ */
+#define AR5K_SIMR0              0x00a4                  /* Register Address [5211+] */
+#define AR5K_SIMR0_QCU_TXOK     0x000003ff      /* Mask for QCU_TXOK */
+#define AR5K_SIMR0_QCU_TXOK_S   0
+#define AR5K_SIMR0_QCU_TXDESC   0x03ff0000      /* Mask for QCU_TXDESC */
+#define AR5K_SIMR0_QCU_TXDESC_S 16
+
+#define AR5K_SIMR1              0x00a8                  /* Register Address [5211+] */
+#define AR5K_SIMR1_QCU_TXERR    0x000003ff      /* Mask for QCU_TXERR */
+#define AR5K_SIMR1_QCU_TXERR_S  0
+#define AR5K_SIMR1_QCU_TXEOL    0x03ff0000      /* Mask for QCU_TXEOL */
+#define AR5K_SIMR1_QCU_TXEOL_S  16
+
+#define AR5K_SIMR2              0x00ac                  /* Register Address [5211+] */
+#define AR5K_SIMR2_QCU_TXURN    0x000003ff      /* Mask for QCU_TXURN */
+#define AR5K_SIMR2_QCU_TXURN_S  0
+#define AR5K_SIMR2_MCABT        0x00100000
+#define AR5K_SIMR2_SSERR        0x00200000
+#define AR5K_SIMR2_DPERR        0x00400000
+#define AR5K_SIMR2_TIM          0x01000000      /* [5212+] */
+#define AR5K_SIMR2_CAB_END      0x02000000      /* [5212+] */
+#define AR5K_SIMR2_DTIM_SYNC    0x04000000      /* [5212+] */
+#define AR5K_SIMR2_BCN_TIMEOUT  0x08000000      /* [5212+] */
+#define AR5K_SIMR2_CAB_TIMEOUT  0x10000000      /* [5212+] */
+#define AR5K_SIMR2_DTIM         0x20000000      /* [5212+] */
+
+#define AR5K_SIMR3              0x00b0                  /* Register Address [5211+] */
+#define AR5K_SIMR3_QCBRORN      0x000003ff      /* Mask for QCBRORN */
+#define AR5K_SIMR3_QCBRORN_S    0
+#define AR5K_SIMR3_QCBRURN      0x03ff0000      /* Mask for QCBRURN */
+#define AR5K_SIMR3_QCBRURN_S    16
+
+#define AR5K_SIMR4              0x00b4                  /* Register Address [5211+] */
+#define AR5K_SIMR4_QTRIG        0x000003ff      /* Mask for QTRIG */
+#define AR5K_SIMR4_QTRIG_S      0
+
+
+/*
+ * Decompression mask registers [5212+]
+ */
+#define AR5K_DCM_ADDR           0x0400          /*Decompression mask address (?)*/
+#define AR5K_DCM_DATA           0x0404          /*Decompression mask data (?)*/
+
+/*
+ * Decompression configuration registers [5212+]
+ */
+#define AR5K_DCCFG              0x0420
+
+/*
+ * Compression configuration registers [5212+]
+ */
+#define AR5K_CCFG               0x0600
+#define AR5K_CCFG_CUP           0x0604
+
+/*
+ * Compression performance counter registers [5212+]
+ */
+#define AR5K_CPC0               0x0610          /* Compression performance counter 0 */
+#define AR5K_CPC1               0x0614          /* Compression performance counter 1*/
+#define AR5K_CPC2               0x0618          /* Compression performance counter 2 */
+#define AR5K_CPC3               0x061c          /* Compression performance counter 3 */
+#define AR5K_CPCORN             0x0620          /* Compression performance overrun (?) */
+
+
+/*
+ * Queue control unit (QCU) registers [5211+]
+ *
+ * Card has 12 TX Queues but i see that only 0-9 are used (?)
+ * both in binary HAL (see ah.h) and ar5k. Each queue has it's own
+ * TXDP at addresses 0x0800 - 0x082c, a CBR (Constant Bit Rate)
+ * configuration register (0x08c0 - 0x08ec), a ready time configuration
+ * register (0x0900 - 0x092c), a misc configuration register (0x09c0 -
+ * 0x09ec) and a status register (0x0a00 - 0x0a2c). We also have some
+ * global registers, QCU transmit enable/disable and "one shot arm (?)"
+ * set/clear, which contain status for all queues (we shift by 1 for each
+ * queue). To access these registers easily we define some macros here
+ * that are used inside HAL. For more infos check out *_tx_queue functs.
+ *
+ * TODO: Boundary checking on macros (here?)
+ */
+
+/*
+ * Generic QCU Register access macros
+ */
+#define AR5K_QUEUE_REG(_r, _q)          (((_q) << 2) + _r)
+#define AR5K_QCU_GLOBAL_READ(_r, _q)    (AR5K_REG_READ(_r) & (1 << _q))
+#define AR5K_QCU_GLOBAL_WRITE(_r, _q)   AR5K_REG_WRITE(_r, (1 << _q))
+
+/*
+ * QCU Transmit descriptor pointer registers
+ */
+#define AR5K_QCU_TXDP_BASE      0x0800          /* Register Address - Queue0 TXDP */
+#define AR5K_QUEUE_TXDP(_q)     AR5K_QUEUE_REG(AR5K_QCU_TXDP_BASE, _q)
+
+/*
+ * QCU Transmit enable register
+ */
+#define AR5K_QCU_TXE            0x0840
+#define AR5K_ENABLE_QUEUE(_q)   AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXE, _q)
+#define AR5K_QUEUE_ENABLED(_q)  AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXE, _q)
+
+/*
+ * QCU Transmit disable register
+ */
+#define AR5K_QCU_TXD            0x0880
+#define AR5K_DISABLE_QUEUE(_q)  AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXD, _q)
+#define AR5K_QUEUE_DISABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXD, _q)
+
+/*
+ * QCU Constant Bit Rate configuration registers
+ */
+#define AR5K_QCU_CBRCFG_BASE            0x08c0  /* Register Address - Queue0 CBRCFG */
+#define AR5K_QCU_CBRCFG_INTVAL          0x00ffffff      /* CBR Interval mask */
+#define AR5K_QCU_CBRCFG_INTVAL_S        0
+#define AR5K_QCU_CBRCFG_ORN_THRES       0xff000000      /* CBR overrun threshold mask */
+#define AR5K_QCU_CBRCFG_ORN_THRES_S     24
+#define AR5K_QUEUE_CBRCFG(_q)           AR5K_QUEUE_REG(AR5K_QCU_CBRCFG_BASE, _q)
+
+/*
+ * QCU Ready time configuration registers
+ */
+#define AR5K_QCU_RDYTIMECFG_BASE        0x0900  /* Register Address - Queue0 RDYTIMECFG */
+#define AR5K_QCU_RDYTIMECFG_INTVAL      0x00ffffff      /* Ready time interval mask */
+#define AR5K_QCU_RDYTIMECFG_INTVAL_S    0
+#define AR5K_QCU_RDYTIMECFG_DURATION    0x00ffffff      /* Ready time duration mask */
+#define AR5K_QCU_RDYTIMECFG_ENABLE      0x01000000      /* Ready time enable mask */
+#define AR5K_QUEUE_RDYTIMECFG(_q)       AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q)
+
+/*
+ * QCU one shot arm set registers
+ */
+#define AR5K_QCU_ONESHOTARM_SET         0x0940  /* Register Address -QCU "one shot arm set (?)" */
+#define AR5K_QCU_ONESHOTARM_SET_M       0x0000ffff
+
+/*
+ * QCU one shot arm clear registers
+ */
+#define AR5K_QCU_ONESHOTARM_CLEAR       0x0980  /* Register Address -QCU "one shot arm clear (?)" */
+#define AR5K_QCU_ONESHOTARM_CLEAR_M     0x0000ffff
+
+/*
+ * QCU misc registers
+ */
+#define AR5K_QCU_MISC_BASE              0x09c0                  /* Register Address -Queue0 MISC */
+#define AR5K_QCU_MISC_FRSHED_M          0x0000000f      /* Frame sheduling mask */
+#define AR5K_QCU_MISC_FRSHED_ASAP       0               /* ASAP */
+#define AR5K_QCU_MISC_FRSHED_CBR        1               /* Constant Bit Rate */
+#define AR5K_QCU_MISC_FRSHED_DBA_GT     2               /* DMA Beacon alert gated (?) */
+#define AR5K_QCU_MISC_FRSHED_TIM_GT     3               /* Time gated (?) */
+#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT        4       /* Beacon sent gated (?) */
+#define AR5K_QCU_MISC_ONESHOT_ENABLE    0x00000010      /* Oneshot enable */
+#define AR5K_QCU_MISC_CBREXP            0x00000020      /* CBR expired (normal queue) */
+#define AR5K_QCU_MISC_CBREXP_BCN        0x00000040      /* CBR expired (beacon queue) */
+#define AR5K_QCU_MISC_BCN_ENABLE        0x00000080      /* Beacons enabled */
+#define AR5K_QCU_MISC_CBR_THRES_ENABLE  0x00000100      /* CBR threshold enabled (?) */
+#define AR5K_QCU_MISC_TXE               0x00000200      /* TXE reset when RDYTIME enalbed (?) */
+#define AR5K_QCU_MISC_CBR               0x00000400      /* CBR threshold reset (?) */
+#define AR5K_QCU_MISC_DCU_EARLY         0x00000800      /* DCU reset (?) */
+#define AR5K_QUEUE_MISC(_q)             AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q)
+
+
+/*
+ * QCU status registers
+ */
+#define AR5K_QCU_STS_BASE       0x0a00                  /* Register Address - Queue0 STS */
+#define AR5K_QCU_STS_FRMPENDCNT 0x00000003      /* Frames pending counter */
+#define AR5K_QCU_STS_CBREXPCNT  0x0000ff00      /* CBR expired counter (?) */
+#define AR5K_QUEUE_STATUS(_q)   AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q)
+
+/*
+ * QCU ready time shutdown register
+ */
+#define AR5K_QCU_RDYTIMESHDN    0x0a40
+#define AR5K_QCU_RDYTIMESHDN_M  0x000003ff
+
+/*
+ * QCU compression buffer base registers [5212+]
+ */
+#define AR5K_QCU_CBB_SELECT     0x0b00
+#define AR5K_QCU_CBB_ADDR       0x0b04
+
+/*
+ * QCU compression buffer configuration register [5212+]
+ */
+#define AR5K_QCU_CBCFG          0x0b08
+
+
+
+/*
+ * Distributed Coordination Function (DCF) control unit (DCU)
+ * registers [5211+]
+ *
+ * These registers control the various characteristics of each queue
+ * for 802.11e (WME) combatibility so they go together with
+ * QCU registers in pairs. For each queue we have a QCU mask register,
+ * (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c),
+ * a retry limit register (0x1080 - 0x10ac), a channel time register
+ * (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and
+ * a sequence number register (0x1140 - 0x116c). It seems that "global"
+ * registers here afect all queues (see use of DCU_GBL_IFS_SLOT in ar5k).
+ * We use the same macros here for easier register access.
+ *
+ */
+
+/*
+ * DCU QCU mask registers
+ */
+#define AR5K_DCU_QCUMASK_BASE   0x1000          /* Register Address -Queue0 DCU_QCUMASK */
+#define AR5K_DCU_QCUMASK_M      0x000003ff
+#define AR5K_QUEUE_QCUMASK(_q)  AR5K_QUEUE_REG(AR5K_DCU_QCUMASK_BASE, _q)
+
+/*
+ * DCU local Inter Frame Space settings register
+ */
+#define AR5K_DCU_LCL_IFS_BASE           0x1040                  /* Register Address -Queue0 DCU_LCL_IFS */
+#define AR5K_DCU_LCL_IFS_CW_MIN         0x000003ff      /* Minimum Contention Window */
+#define AR5K_DCU_LCL_IFS_CW_MIN_S       0
+#define AR5K_DCU_LCL_IFS_CW_MAX         0x000ffc00      /* Maximum Contention Window */
+#define AR5K_DCU_LCL_IFS_CW_MAX_S       10
+#define AR5K_DCU_LCL_IFS_AIFS           0x0ff00000      /* Arbitrated Interframe Space */
+#define AR5K_DCU_LCL_IFS_AIFS_S         20
+#define AR5K_QUEUE_DFS_LOCAL_IFS(_q)    AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q)
+
+/*
+ * DCU retry limit registers
+ */
+#define AR5K_DCU_RETRY_LMT_BASE         0x1080                  /* Register Address -Queue0 DCU_RETRY_LMT */
+#define AR5K_DCU_RETRY_LMT_SH_RETRY     0x0000000f      /* Short retry limit mask */
+#define AR5K_DCU_RETRY_LMT_SH_RETRY_S   0
+#define AR5K_DCU_RETRY_LMT_LG_RETRY     0x000000f0      /* Long retry limit mask */
+#define AR5K_DCU_RETRY_LMT_LG_RETRY_S   4
+#define AR5K_DCU_RETRY_LMT_SSH_RETRY    0x00003f00      /* Station short retry limit mask (?) */
+#define AR5K_DCU_RETRY_LMT_SSH_RETRY_S  8
+#define AR5K_DCU_RETRY_LMT_SLG_RETRY    0x000fc000      /* Station long retry limit mask (?) */
+#define AR5K_DCU_RETRY_LMT_SLG_RETRY_S  14
+#define AR5K_QUEUE_DFS_RETRY_LIMIT(_q)  AR5K_QUEUE_REG(AR5K_DCU_RETRY_LMT_BASE, _q)
+
+/*
+ * DCU channel time registers
+ */
+#define AR5K_DCU_CHAN_TIME_BASE         0x10c0                  /* Register Address -Queue0 DCU_CHAN_TIME */
+#define AR5K_DCU_CHAN_TIME_DUR          0x000fffff      /* Channel time duration */
+#define AR5K_DCU_CHAN_TIME_DUR_S        0
+#define AR5K_DCU_CHAN_TIME_ENABLE       0x00100000      /* Enable channel time */
+#define AR5K_QUEUE_DFS_CHANNEL_TIME(_q) AR5K_QUEUE_REG(AR5K_DCU_CHAN_TIME_BASE, _q)
+
+/*
+ * DCU misc registers [5211+]
+ *
+ * For some of the registers i couldn't find in the code
+ * (only backoff stuff is there realy) i tried to match the
+ * names with 802.11e parameters etc, so i guess VIRTCOL here
+ * means Virtual Collision and HCFPOLL means Hybrid Coordination
+ * factor Poll (CF- Poll). Arbiter lockout control controls the
+ * behaviour on low priority queues when we have multiple queues
+ * with pending frames. Intra-frame lockout means we wait until
+ * the queue's current frame transmits (with post frame backoff and bursting)
+ * before we transmit anything else and global lockout means we
+ * wait for the whole queue to finish before higher priority queues
+ * can transmit (this is used on beacon and CAB queues).
+ * No lockout means there is no special handling.
+ */
+#define AR5K_DCU_MISC_BASE              0x1100                  /* Register Address -Queue0 DCU_MISC */
+#define AR5K_DCU_MISC_BACKOFF           0x000007ff      /* Mask for backoff setting (?) */
+#define AR5K_DCU_MISC_BACKOFF_FRAG      0x00000200      /* Enable backoff while bursting */
+#define AR5K_DCU_MISC_HCFPOLL_ENABLE    0x00000800      /* CF - Poll (?) */
+#define AR5K_DCU_MISC_BACKOFF_PERSIST   0x00001000      /* Persistent backoff (?) */
+#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE  0x00002000      /* Enable frame pre-fetch (?) */
+#define AR5K_DCU_MISC_VIRTCOL           0x0000c000      /* Mask for Virtual Collision (?) */
+#define AR5K_DCU_MISC_VIRTCOL_NORMAL    0
+#define AR5K_DCU_MISC_VIRTCOL_MODIFIED  1
+#define AR5K_DCU_MISC_VIRTCOL_IGNORE    2
+#define AR5K_DCU_MISC_BCN_ENABLE        0x00010000      /* Beacon enable (?) */
+#define AR5K_DCU_MISC_ARBLOCK_CTL       0x00060000      /* Arbiter lockout control mask */
+#define AR5K_DCU_MISC_ARBLOCK_CTL_S     17
+#define AR5K_DCU_MISC_ARBLOCK_CTL_NONE  0               /* No arbiter lockout */
+#define AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM        1       /* Intra-frame lockout */
+#define AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL        2       /* Global lockout */
+#define AR5K_DCU_MISC_ARBLOCK_IGNORE    0x00080000
+#define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS  0x00100000      /* Disable sequence number increment (?) */
+#define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000      /* Disable post-frame backoff (?) */
+#define AR5K_DCU_MISC_VIRT_COLL_POLICY  0x00400000      /* Virtual Collision policy (?) */
+#define AR5K_DCU_MISC_BLOWN_IFS_POLICY  0x00800000
+#define AR5K_DCU_MISC_SEQNUM_CTL        0x01000000      /* Sequence number control (?) */
+#define AR5K_QUEUE_DFS_MISC(_q)         AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q)
+
+/*
+ * DCU frame sequence number registers
+ */
+#define AR5K_DCU_SEQNUM_BASE    0x1140
+#define AR5K_DCU_SEQNUM_M       0x00000fff
+#define AR5K_QUEUE_DFS_SEQNUM(_q)       AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q)
+
+/*
+ * DCU global IFS SIFS registers
+ */
+#define AR5K_DCU_GBL_IFS_SIFS   0x1030
+#define AR5K_DCU_GBL_IFS_SIFS_M 0x0000ffff
+
+/*
+ * DCU global IFS slot interval registers
+ */
+#define AR5K_DCU_GBL_IFS_SLOT   0x1070
+#define AR5K_DCU_GBL_IFS_SLOT_M 0x0000ffff
+
+/*
+ * DCU global IFS EIFS registers
+ */
+#define AR5K_DCU_GBL_IFS_EIFS   0x10b0
+#define AR5K_DCU_GBL_IFS_EIFS_M 0x0000ffff
+
+/*
+ * DCU global IFS misc registers
+ */
+#define AR5K_DCU_GBL_IFS_MISC                   0x10f0                  /* Register Address */
+#define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE        0x00000007
+#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE        0x00000008      /* Turbo mode (?) */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC     0x000003f0      /* SIFS Duration mask (?) */
+#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR          0x000ffc00
+#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY     0x00300000
+
+/*
+ * DCU frame prefetch control register
+ */
+#define AR5K_DCU_FP             0x1230
+
+/*
+ * DCU transmit pause control/status register
+ */
+#define AR5K_DCU_TXP            0x1270                  /* Register Address */
+#define AR5K_DCU_TXP_M          0x000003ff      /* Tx pause mask (?) */
+#define AR5K_DCU_TXP_STATUS     0x00010000      /* Tx pause status (?) */
+
+/*
+ * DCU transmit filter register
+ */
+#define AR5K_DCU_TX_FILTER      0x1038
+
+/*
+ * DCU clear transmit filter register
+ */
+#define AR5K_DCU_TX_FILTER_CLR  0x143c
+
+/*
+ * DCU set transmit filter register
+ */
+#define AR5K_DCU_TX_FILTER_SET  0x147c
+
+/*
+ * Reset control register
+ *
+ * 4 and 8 are not used in 5211/5212 and
+ * 2 means "baseband reset" on 5211/5212.
+ */
+#define AR5K_RESET_CTL          0x4000                  /* Register Address */
+#define AR5K_RESET_CTL_PCU      0x00000001      /* Protocol Control Unit reset */
+#define AR5K_RESET_CTL_DMA      0x00000002      /* DMA (Rx/Tx) reset [5210] */
+#define AR5K_RESET_CTL_BASEBAND 0x00000002      /* Baseband reset [5211+] */
+#define AR5K_RESET_CTL_MAC      0x00000004      /* MAC reset (PCU+Baseband ?) [5210] */
+#define AR5K_RESET_CTL_PHY      0x00000008      /* PHY reset [5210] */
+#define AR5K_RESET_CTL_PCI      0x00000010      /* PCI Core reset (interrupts etc) */
+#define AR5K_RESET_CTL_CHIP     (AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA |      \
+                                AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY)
+
+/*
+ * Sleep control register
+ */
+#define AR5K_SLEEP_CTL                  0x4004                  /* Register Address */
+#define AR5K_SLEEP_CTL_SLDUR            0x0000ffff      /* Sleep duration mask */
+#define AR5K_SLEEP_CTL_SLDUR_S          0
+#define AR5K_SLEEP_CTL_SLE              0x00030000      /* Sleep enable mask */
+#define AR5K_SLEEP_CTL_SLE_S            16
+#define AR5K_SLEEP_CTL_SLE_WAKE         0x00000000      /* Force chip awake */
+#define AR5K_SLEEP_CTL_SLE_SLP          0x00010000      /* Force chip sleep */
+#define AR5K_SLEEP_CTL_SLE_ALLOW        0x00020000
+#define AR5K_SLEEP_CTL_SLE_UNITS        0x00000008      /* [5211+] */
+
+/*
+ * Interrupt pending register
+ */
+#define AR5K_INTPEND    0x4008
+#define AR5K_INTPEND_M  0x00000001
+
+/*
+ * Sleep force register
+ */
+#define AR5K_SFR        0x400c
+#define AR5K_SFR_M      0x00000001
+
+/*
+ * PCI configuration register
+ */
+#define AR5K_PCICFG                     0x4010                  /* Register Address */
+#define AR5K_PCICFG_EEAE                0x00000001      /* Eeprom access enable [5210] */
+#define AR5K_PCICFG_CLKRUNEN            0x00000004      /* CLKRUN enable [5211+] */
+#define AR5K_PCICFG_EESIZE              0x00000018      /* Mask for EEPROM size [5211+] */
+#define AR5K_PCICFG_EESIZE_S            3
+#define AR5K_PCICFG_EESIZE_4K           0               /* 4K */
+#define AR5K_PCICFG_EESIZE_8K           1               /* 8K */
+#define AR5K_PCICFG_EESIZE_16K          2               /* 16K */
+#define AR5K_PCICFG_EESIZE_FAIL         3               /* Failed to get size (?) [5211+] */
+#define AR5K_PCICFG_LED                 0x00000060      /* Led status [5211+] */
+#define AR5K_PCICFG_LED_NONE            0x00000000      /* Default [5211+] */
+#define AR5K_PCICFG_LED_PEND            0x00000020      /* Scan / Auth pending */
+#define AR5K_PCICFG_LED_ASSOC           0x00000040      /* Associated */
+#define AR5K_PCICFG_BUS_SEL             0x00000380      /* Mask for "bus select" [5211+] (?) */
+#define AR5K_PCICFG_CBEFIX_DIS          0x00000400      /* Disable CBE fix (?) */
+#define AR5K_PCICFG_SL_INTEN            0x00000800      /* Enable interrupts when asleep (?) */
+#define AR5K_PCICFG_LED_BCTL            0x00001000      /* Led blink (?) [5210] */
+#define AR5K_PCICFG_SL_INPEN            0x00002800      /* Sleep even whith pending interrupts (?) */
+#define AR5K_PCICFG_SPWR_DN             0x00010000      /* Mask for power status */
+#define AR5K_PCICFG_LEDMODE             0x000e0000      /* Ledmode [5211+] */
+#define AR5K_PCICFG_LEDMODE_PROP        0x00000000      /* Blink on standard traffic [5211+] */
+#define AR5K_PCICFG_LEDMODE_PROM        0x00020000      /* Default mode (blink on any traffic) [5211+] */
+#define AR5K_PCICFG_LEDMODE_PWR         0x00040000      /* Some other blinking mode  (?) [5211+] */
+#define AR5K_PCICFG_LEDMODE_RAND        0x00060000      /* Random blinking (?) [5211+] */
+#define AR5K_PCICFG_LEDBLINK            0x00700000
+#define AR5K_PCICFG_LEDBLINK_S          20
+#define AR5K_PCICFG_LEDSLOW             0x00800000      /* Slow led blink rate (?) [5211+] */
+#define AR5K_PCICFG_LEDSTATE                            \
+        (AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE |        \
+        AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW)
+
+/*
+ * "General Purpose Input/Output" (GPIO) control register
+ *
+ * I'm not sure about this but after looking at the code
+ * for all chipsets here is what i got.
+ *
+ * We have 6 GPIOs (pins), each GPIO has 4 modes (2 bits)
+ * Mode 0 -> always input
+ * Mode 1 -> output when GPIODO for this GPIO is set to 0
+ * Mode 2 -> output when GPIODO for this GPIO is set to 1
+ * Mode 3 -> always output
+ *
+ * For more infos check out get_gpio/set_gpio and
+ * set_gpio_input/set_gpio_output functs.
+ * For more infos on gpio interrupt check out set_gpio_intr.
+ */
+#define AR5K_NUM_GPIO   6
+
+#define AR5K_GPIOCR             0x4014                          /* Register Address */
+#define AR5K_GPIOCR_INT_ENA     0x00008000              /* Enable GPIO interrupt */
+#define AR5K_GPIOCR_INT_SELL    0x00000000              /* Generate interrupt when pin is off (?) */
+#define AR5K_GPIOCR_INT_SELH    0x00010000              /* Generate interrupt when pin is on */
+#define AR5K_GPIOCR_IN(n)       (0 << ((n) * 2))        /* Mode 0 for pin n */
+#define AR5K_GPIOCR_OUT0(n)     (1 << ((n) * 2))        /* Mode 1 for pin n */
+#define AR5K_GPIOCR_OUT1(n)     (2 << ((n) * 2))        /* Mode 2 for pin n */
+#define AR5K_GPIOCR_OUT(n)      (3 << ((n) * 2))        /* Mode 3 for pin n */
+#define AR5K_GPIOCR_INT_SEL(n)  ((n) << 12)             /* Interrupt for GPIO pin n */
+
+/*
+ * "General Purpose Input/Output" (GPIO) data output register
+ */
+#define AR5K_GPIODO     0x4018
+
+/*
+ * "General Purpose Input/Output" (GPIO) data input register
+ */
+#define AR5K_GPIODI     0x401c
+#define AR5K_GPIODI_M   0x0000002f
+
+
+/*
+ * Silicon revision register
+ */
+#define AR5K_SREV               0x4020                  /* Register Address */
+#define AR5K_SREV_REV           0x0000000f      /* Mask for revision */
+#define AR5K_SREV_REV_S         0
+#define AR5K_SREV_VER           0x000000ff      /* Mask for version */
+#define AR5K_SREV_VER_S         4
+
+
+
+/*====EEPROM REGISTERS====*/
+
+/*
+ * EEPROM access registers
+ *
+ * Here we got a difference between 5210/5211-12
+ * read data register for 5210 is at 0x6800 and
+ * status register is at 0x6c00. There is also
+ * no eeprom command register on 5210 and the
+ * offsets are different.
+ *
+ * To read eeprom data for a specific offset:
+ * 5210 - enable eeprom access (AR5K_PCICFG_EEAE)
+ *        read AR5K_EEPROM_BASE +(4 * offset)
+ *        check the eeprom status register
+ *        and read eeprom data register.
+ *
+ * 5211 - write offset to AR5K_EEPROM_BASE
+ * 5212   write AR5K_EEPROM_CMD_READ on AR5K_EEPROM_CMD
+ *        check the eeprom status register
+ *        and read eeprom data register.
+ *
+ * To write eeprom data for a specific offset:
+ * 5210 - enable eeprom access (AR5K_PCICFG_EEAE)
+ *        write data to AR5K_EEPROM_BASE +(4 * offset)
+ *        check the eeprom status register
+ * 5211 - write AR5K_EEPROM_CMD_RESET on AR5K_EEPROM_CMD
+ * 5212   write offset to AR5K_EEPROM_BASE
+ *        write data to data register
+ *        write AR5K_EEPROM_CMD_WRITE on AR5K_EEPROM_CMD
+ *        check the eeprom status register
+ *
+ * For more infos check eeprom_* functs and the ar5k.c
+ * file posted in madwifi-devel mailing list.
+ * http://sourceforge.net/mailarchive/message.php?msg_id=8966525
+ *
+ */
+#define AR5K_EEPROM_BASE        0x6000
+
+/*
+ * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE)
+ */
+#define AR5K_EEPROM_MAGIC               0x003d  /* EEPROM Magic number */
+#define AR5K_EEPROM_MAGIC_VALUE         0x5aa5  /* Default - found on EEPROM */
+#define AR5K_EEPROM_MAGIC_5212          0x0000145c /* 5212 */
+#define AR5K_EEPROM_MAGIC_5211          0x0000145b /* 5211 */
+#define AR5K_EEPROM_MAGIC_5210          0x0000145a /* 5210 */
+
+#define AR5K_EEPROM_PROTECT             0x003f  /* EEPROM protect status */
+#define AR5K_EEPROM_PROTECT_RD_0_31     0x0001  /* Read protection bit for offsets 0x0 - 0x1f */
+#define AR5K_EEPROM_PROTECT_WR_0_31     0x0002  /* Write protection bit for offsets 0x0 - 0x1f */
+#define AR5K_EEPROM_PROTECT_RD_32_63    0x0004  /* 0x20 - 0x3f */
+#define AR5K_EEPROM_PROTECT_WR_32_63    0x0008
+#define AR5K_EEPROM_PROTECT_RD_64_127   0x0010  /* 0x40 - 0x7f */
+#define AR5K_EEPROM_PROTECT_WR_64_127   0x0020
+#define AR5K_EEPROM_PROTECT_RD_128_191  0x0040  /* 0x80 - 0xbf (regdom) */
+#define AR5K_EEPROM_PROTECT_WR_128_191  0x0080
+#define AR5K_EEPROM_PROTECT_RD_192_207  0x0100  /* 0xc0 - 0xcf */
+#define AR5K_EEPROM_PROTECT_WR_192_207  0x0200
+#define AR5K_EEPROM_PROTECT_RD_208_223  0x0400  /* 0xd0 - 0xdf */
+#define AR5K_EEPROM_PROTECT_WR_208_223  0x0800
+#define AR5K_EEPROM_PROTECT_RD_224_239  0x1000  /* 0xe0 - 0xef */
+#define AR5K_EEPROM_PROTECT_WR_224_239  0x2000
+#define AR5K_EEPROM_PROTECT_RD_240_255  0x4000  /* 0xf0 - 0xff */
+#define AR5K_EEPROM_PROTECT_WR_240_255  0x8000
+#define AR5K_EEPROM_REG_DOMAIN          0x00bf  /* EEPROM regdom */
+#define AR5K_EEPROM_INFO_BASE           0x00c0  /* EEPROM header */
+#define AR5K_EEPROM_INFO_MAX            (0x400 - AR5K_EEPROM_INFO_BASE)
+#define AR5K_EEPROM_INFO_CKSUM          0xffff
+#define AR5K_EEPROM_INFO(_n)            (AR5K_EEPROM_INFO_BASE + (_n))
+
+#define AR5K_EEPROM_VERSION             AR5K_EEPROM_INFO(1)     /* EEPROM Version */
+#define AR5K_EEPROM_VERSION_3_0         0x3000  /* No idea what's going on before this version */
+#define AR5K_EEPROM_VERSION_3_1         0x3001  /* ob/db values for 2Ghz (ar5211_rfregs) */
+#define AR5K_EEPROM_VERSION_3_2         0x3002  /* different frequency representation (eeprom_bin2freq) */
+#define AR5K_EEPROM_VERSION_3_3         0x3003  /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */
+#define AR5K_EEPROM_VERSION_3_4         0x3004  /* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */
+#define AR5K_EEPROM_VERSION_4_0         0x4000  /* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_1         0x4001  /* has ee_margin_tx_rx (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_2         0x4002  /* has ee_cck_ofdm_gain_delta (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_3         0x4003
+#define AR5K_EEPROM_VERSION_4_4         0x4004
+#define AR5K_EEPROM_VERSION_4_5         0x4005
+#define AR5K_EEPROM_VERSION_4_6         0x4006  /* has ee_scaled_cck_delta */
+#define AR5K_EEPROM_VERSION_4_7         0x3007
+
+#define AR5K_EEPROM_MODE_11A            0
+#define AR5K_EEPROM_MODE_11B            1
+#define AR5K_EEPROM_MODE_11G            2
+
+#define AR5K_EEPROM_HDR                 AR5K_EEPROM_INFO(2)     /* Header that contains the device caps */
+#define AR5K_EEPROM_HDR_11A(_v)         (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)
+#define AR5K_EEPROM_HDR_11B(_v)         (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)
+#define AR5K_EEPROM_HDR_11G(_v)         (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)
+#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v)  (((_v) >> 3) & 0x1)     /* Disable turbo for 2Ghz (?) */
+#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v)  (((_v) >> 4) & 0x7f)    /* Max turbo power for a/XR mode (eeprom_init) */
+#define AR5K_EEPROM_HDR_DEVICE(_v)      (((_v) >> 11) & 0x7)
+#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v)  (((_v) >> 15) & 0x1)    /* Disable turbo for 5Ghz (?) */
+#define AR5K_EEPROM_HDR_RFKILL(_v)      (((_v) >> 14) & 0x1)    /* Device has RFKill support */
+
+#define AR5K_EEPROM_RFKILL_GPIO_SEL     0x0000001c
+#define AR5K_EEPROM_RFKILL_GPIO_SEL_S   2
+#define AR5K_EEPROM_RFKILL_POLARITY     0x00000002
+#define AR5K_EEPROM_RFKILL_POLARITY_S   1
+
+/* Newer EEPROMs are using a different offset */
+#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
+        (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
+
+#define AR5K_EEPROM_ANT_GAIN(_v)        AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3)
+#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v)   ((int8_t)(((_v) >> 8) & 0xff))
+#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v)   ((int8_t)((_v) & 0xff))
+
+/* calibration settings */
+#define AR5K_EEPROM_MODES_11A(_v)       AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4)
+#define AR5K_EEPROM_MODES_11B(_v)       AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2)
+#define AR5K_EEPROM_MODES_11G(_v)       AR5K_EEPROM_OFF(_v, 0x00da, 0x010d)
+#define AR5K_EEPROM_CTL(_v)             AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128)     /* Conformance test limits */
+
+/* [3.1 - 3.3] */
+#define AR5K_EEPROM_OBDB0_2GHZ          0x00ec
+#define AR5K_EEPROM_OBDB1_2GHZ          0x00ed
+
+/* Misc values available since EEPROM 4.0 */
+#define AR5K_EEPROM_MISC0               0x00c4
+#define AR5K_EEPROM_EARSTART(_v)        ((_v) & 0xfff)
+#define AR5K_EEPROM_EEMAP(_v)           (((_v) >> 14) & 0x3)
+#define AR5K_EEPROM_MISC1               0x00c5
+#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff)
+#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1)
+
+/*
+ * EEPROM data register
+ */
+#define AR5K_EEPROM_DATA_5211   0x6004
+#define AR5K_EEPROM_DATA_5210   0x6800
+#define AR5K_EEPROM_DATA        (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_EEPROM_DATA_5210 : AR5K_EEPROM_DATA_5211)
+
+/*
+ * EEPROM command register
+ */
+#define AR5K_EEPROM_CMD         0x6008                  /* Register Addres */
+#define AR5K_EEPROM_CMD_READ    0x00000001      /* EEPROM read */
+#define AR5K_EEPROM_CMD_WRITE   0x00000002      /* EEPROM write */
+#define AR5K_EEPROM_CMD_RESET   0x00000004      /* EEPROM reset */
+
+/*
+ * EEPROM status register
+ */
+#define AR5K_EEPROM_STAT_5210   0x6c00                  /* Register Address [5210] */
+#define AR5K_EEPROM_STAT_5211   0x600c                  /* Register Address [5211+] */
+#define AR5K_EEPROM_STATUS      (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_EEPROM_STAT_5210 : AR5K_EEPROM_STAT_5211)
+#define AR5K_EEPROM_STAT_RDERR  0x00000001      /* EEPROM read failed */
+#define AR5K_EEPROM_STAT_RDDONE 0x00000002      /* EEPROM read successful */
+#define AR5K_EEPROM_STAT_WRERR  0x00000004      /* EEPROM write failed */
+#define AR5K_EEPROM_STAT_WRDONE 0x00000008      /* EEPROM write successful */
+
+/*
+ * EEPROM config register (?)
+ */
+#define AR5K_EEPROM_CFG 0x6010
+
+
+
+/*
+ * Protocol Control Unit (PCU) registers
+ */
+/*
+ * Used for checking initial register writes
+ * during channel reset (see reset func)
+ */
+#define AR5K_PCU_MIN    0x8000
+#define AR5K_PCU_MAX    0x8fff
+
+/*
+ * First station id register (MAC address in lower 32 bits)
+ */
+#define AR5K_STA_ID0    0x8000
+
+/*
+ * Second station id register (MAC address in upper 16 bits)
+ */
+#define AR5K_STA_ID1                    0x8004                  /* Register Address */
+#define AR5K_STA_ID1_AP                 0x00010000      /* Set AP mode */
+#define AR5K_STA_ID1_ADHOC              0x00020000      /* Set Ad-Hoc mode */
+#define AR5K_STA_ID1_PWR_SV             0x00040000      /* Power save reporting (?) */
+#define AR5K_STA_ID1_NO_KEYSRCH         0x00080000      /* No key search */
+#define AR5K_STA_ID1_NO_PSPOLL          0x00100000      /* No power save polling [5210] */
+#define AR5K_STA_ID1_PCF_5211           0x00100000      /* Enable PCF on [5211+] */
+#define AR5K_STA_ID1_PCF_5210           0x00200000      /* Enable PCF on [5210]*/
+#define AR5K_STA_ID1_PCF                (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211)
+#define AR5K_STA_ID1_DEFAULT_ANTENNA    0x00200000      /* Use default antenna */
+#define AR5K_STA_ID1_DESC_ANTENNA       0x00400000      /* Update antenna from descriptor */
+#define AR5K_STA_ID1_RTS_DEF_ANTENNA    0x00800000      /* Use default antenna for RTS (?) */
+#define AR5K_STA_ID1_ACKCTS_6MB         0x01000000      /* Use 6Mbit/s for ACK/CTS (?) */
+#define AR5K_STA_ID1_BASE_RATE_11B      0x02000000      /* Use 11b base rate (for ACK/CTS ?) [5211+] */
+
+/*
+ * First BSSID register (MAC address, lower 32bits)
+ */
+#define AR5K_BSS_ID0    0x8008
+
+/*
+ * Second BSSID register (MAC address in upper 16 bits)
+ *
+ * AID: Association ID
+ */
+#define AR5K_BSS_ID1            0x800c
+#define AR5K_BSS_ID1_AID        0xffff0000
+#define AR5K_BSS_ID1_AID_S      16
+
+/*
+ * Backoff slot time register
+ */
+#define AR5K_SLOT_TIME  0x8010
+
+/*
+ * ACK/CTS timeout register
+ */
+#define AR5K_TIME_OUT           0x8014                  /* Register Address */
+#define AR5K_TIME_OUT_ACK       0x00001fff      /* ACK timeout mask */
+#define AR5K_TIME_OUT_ACK_S     0
+#define AR5K_TIME_OUT_CTS       0x1fff0000      /* CTS timeout mask */
+#define AR5K_TIME_OUT_CTS_S     16
+
+/*
+ * RSSI threshold register
+ */
+#define AR5K_RSSI_THR                   0x8018          /* Register Address */
+#define AR5K_RSSI_THR_M                 0x000000ff      /* Mask for RSSI threshold [5211+] */
+#define AR5K_RSSI_THR_BMISS_5210        0x00000700      /* Mask for Beacon Missed threshold [5210] */
+#define AR5K_RSSI_THR_BMISS_5210_S      8
+#define AR5K_RSSI_THR_BMISS_5211        0x0000ff00      /* Mask for Beacon Missed threshold [5211+] */
+#define AR5K_RSSI_THR_BMISS_5211_S      8
+#define AR5K_RSSI_THR_BMISS             (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_RSSI_THR_BMISS_5210 : AR5K_RSSI_THR_BMISS_5211)
+#define AR5K_RSSI_THR_BMISS_S           8
+
+/*
+ * 5210 has more PCU registers because there is no QCU/DCU
+ * so queue parameters are set here, this way a lot common
+ * registers have different address for 5210. To make things
+ * easier we define a macro based on ah->ah_version for common
+ * registers with different addresses and common flags.
+ */
+
+/*
+ * Retry limit register
+ *
+ * Retry limit register for 5210 (no QCU/DCU so it's done in PCU)
+ */
+#define AR5K_NODCU_RETRY_LMT            0x801c                  /*Register Address */
+#define AR5K_NODCU_RETRY_LMT_SH_RETRY   0x0000000f      /* Short retry limit mask */
+#define AR5K_NODCU_RETRY_LMT_SH_RETRY_S 0
+#define AR5K_NODCU_RETRY_LMT_LG_RETRY   0x000000f0      /* Long retry mask */
+#define AR5K_NODCU_RETRY_LMT_LG_RETRY_S 4
+#define AR5K_NODCU_RETRY_LMT_SSH_RETRY  0x00003f00      /* Station short retry limit mask */
+#define AR5K_NODCU_RETRY_LMT_SSH_RETRY_S        8
+#define AR5K_NODCU_RETRY_LMT_SLG_RETRY  0x000fc000      /* Station long retry limit mask */
+#define AR5K_NODCU_RETRY_LMT_SLG_RETRY_S        14
+#define AR5K_NODCU_RETRY_LMT_CW_MIN     0x3ff00000      /* Minimum contention window mask */
+#define AR5K_NODCU_RETRY_LMT_CW_MIN_S   20
+
+/*
+ * Transmit latency register
+ */
+#define AR5K_USEC_5210                  0x8020                  /* Register Address [5210] */
+#define AR5K_USEC_5211                  0x801c                  /* Register Address [5211+] */
+#define AR5K_USEC                       (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_USEC_5210 : AR5K_USEC_5211)
+#define AR5K_USEC_1                     0x0000007f
+#define AR5K_USEC_1_S                   0
+#define AR5K_USEC_32                    0x00003f80
+#define AR5K_USEC_32_S                  7
+#define AR5K_USEC_TX_LATENCY_5211       0x007fc000
+#define AR5K_USEC_TX_LATENCY_5211_S     14
+#define AR5K_USEC_RX_LATENCY_5211       0x1f800000
+#define AR5K_USEC_RX_LATENCY_5211_S     23
+#define AR5K_USEC_TX_LATENCY_5210       0x000fc000      /* also for 5311 */
+#define AR5K_USEC_TX_LATENCY_5210_S     14
+#define AR5K_USEC_RX_LATENCY_5210       0x03f00000      /* also for 5311 */
+#define AR5K_USEC_RX_LATENCY_5210_S     20
+
+/*
+ * PCU beacon control register
+ */
+#define AR5K_BEACON_5210        0x8024
+#define AR5K_BEACON_5211        0x8020
+#define AR5K_BEACON             (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_BEACON_5210 : AR5K_BEACON_5211)
+#define AR5K_BEACON_PERIOD      0x0000ffff
+#define AR5K_BEACON_PERIOD_S    0
+#define AR5K_BEACON_TIM         0x007f0000
+#define AR5K_BEACON_TIM_S       16
+#define AR5K_BEACON_ENABLE      0x00800000
+#define AR5K_BEACON_RESET_TSF   0x01000000
+
+/*
+ * CFP period register
+ */
+#define AR5K_CFP_PERIOD_5210    0x8028
+#define AR5K_CFP_PERIOD_5211    0x8024
+#define AR5K_CFP_PERIOD         (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_CFP_PERIOD_5210 : AR5K_CFP_PERIOD_5211)
+
+/*
+ * Next beacon time register
+ */
+#define AR5K_TIMER0_5210        0x802c
+#define AR5K_TIMER0_5211        0x8028
+#define AR5K_TIMER0             (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_TIMER0_5210 : AR5K_TIMER0_5211)
+
+/*
+ * Next DMA beacon alert register
+ */
+#define AR5K_TIMER1_5210        0x8030
+#define AR5K_TIMER1_5211        0x802c
+#define AR5K_TIMER1             (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_TIMER1_5210 : AR5K_TIMER1_5211)
+
+/*
+ * Next software beacon alert register
+ */
+#define AR5K_TIMER2_5210        0x8034
+#define AR5K_TIMER2_5211        0x8030
+#define AR5K_TIMER2             (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_TIMER2_5210 : AR5K_TIMER2_5211)
+
+/*
+ * Next ATIM window time register
+ */
+#define AR5K_TIMER3_5210        0x8038
+#define AR5K_TIMER3_5211        0x8034
+#define AR5K_TIMER3             (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_TIMER3_5210 : AR5K_TIMER3_5211)
+
+
+/*
+ * 5210 First inter frame spacing register (IFS)
+ */
+#define AR5K_IFS0               0x8040
+#define AR5K_IFS0_SIFS          0x000007ff
+#define AR5K_IFS0_SIFS_S        0
+#define AR5K_IFS0_DIFS          0x007ff800
+#define AR5K_IFS0_DIFS_S        11
+
+/*
+ * 5210 Second inter frame spacing register (IFS)
+ */
+#define AR5K_IFS1               0x8044
+#define AR5K_IFS1_PIFS          0x00000fff
+#define AR5K_IFS1_PIFS_S        0
+#define AR5K_IFS1_EIFS          0x03fff000
+#define AR5K_IFS1_EIFS_S        12
+#define AR5K_IFS1_CS_EN         0x04000000
+
+
+/*
+ * CFP duration register
+ */
+#define AR5K_CFP_DUR_5210       0x8048
+#define AR5K_CFP_DUR_5211       0x8038
+#define AR5K_CFP_DUR            (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_CFP_DUR_5210 : AR5K_CFP_DUR_5211)
+
+/*
+ * Receive filter register
+ * TODO: Get these out of ar5xxx.h on ath5k
+ */
+#define AR5K_RX_FILTER_5210     0x804c                  /* Register Address [5210] */
+#define AR5K_RX_FILTER_5211     0x803c                  /* Register Address [5211+] */
+#define AR5K_RX_FILTER          (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211)
+#define AR5K_RX_FILTER_UCAST    0x00000001      /* Don't filter unicast frames */
+#define AR5K_RX_FILTER_MCAST    0x00000002      /* Don't filter multicast frames */
+#define AR5K_RX_FILTER_BCAST    0x00000004      /* Don't filter broadcast frames */
+#define AR5K_RX_FILTER_CONTROL  0x00000008      /* Don't filter control frames */
+#define AR5K_RX_FILTER_BEACON   0x00000010      /* Don't filter beacon frames */
+#define AR5K_RX_FILTER_PROM     0x00000020      /* Set promiscuous mode */
+#define AR5K_RX_FILTER_XRPOLL   0x00000040      /* Don't filter XR poll frame [5212+] */
+#define AR5K_RX_FILTER_PROBEREQ 0x00000080      /* Don't filter probe requests [5212+] */
+#define AR5K_RX_FILTER_PHYERR_5212      0x00000100      /* Don't filter phy errors [5212+] */
+#define AR5K_RX_FILTER_RADARERR_5212    0x00000200      /* Don't filter phy radar errors [5212+] */
+#define AR5K_RX_FILTER_PHYERR_5211      0x00000040      /* [5211] */
+#define AR5K_RX_FILTER_RADARERR_5211    0x00000080      /* [5211] */
+#define AR5K_RX_FILTER_PHYERR  \
+        ((ah->ah_version == AR5K_AR5211 ? \
+        AR5K_RX_FILTER_PHYERR_5211 : AR5K_RX_FILTER_PHYERR_5212))
+#define        AR5K_RX_FILTER_RADARERR \
+        ((ah->ah_version == AR5K_AR5211 ? \
+        AR5K_RX_FILTER_RADARERR_5211 : AR5K_RX_FILTER_RADARERR_5212))
+
+/*
+ * Multicast filter register (lower 32 bits)
+ */
+#define AR5K_MCAST_FILTER0_5210 0x8050
+#define AR5K_MCAST_FILTER0_5211 0x8040
+#define AR5K_MCAST_FILTER0      (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_MCAST_FILTER0_5210 : AR5K_MCAST_FILTER0_5211)
+
+/*
+ * Multicast filter register (higher 16 bits)
+ */
+#define AR5K_MCAST_FILTER1_5210 0x8054
+#define AR5K_MCAST_FILTER1_5211 0x8044
+#define AR5K_MCAST_FILTER1      (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_MCAST_FILTER1_5210 : AR5K_MCAST_FILTER1_5211)
+
+
+/*
+ * Transmit mask register (lower 32 bits) [5210]
+ */
+#define AR5K_TX_MASK0   0x8058
+
+/*
+ * Transmit mask register (higher 16 bits) [5210]
+ */
+#define AR5K_TX_MASK1   0x805c
+
+/*
+ * Clear transmit mask [5210]
+ */
+#define AR5K_CLR_TMASK  0x8060
+
+/*
+ * Trigger level register (before transmission) [5210]
+ */
+#define AR5K_TRIG_LVL   0x8064
+
+
+/*
+ * PCU control register
+ *
+ * Only DIS_RX is used in the code, the rest i guess are
+ * for tweaking/diagnostics.
+ */
+#define AR5K_DIAG_SW_5210               0x8068                  /* Register Address [5210] */
+#define AR5K_DIAG_SW_5211               0x8048                  /* Register Address [5211+] */
+#define AR5K_DIAG_SW                    (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211)
+#define AR5K_DIAG_SW_DIS_WEP_ACK        0x00000001
+#define AR5K_DIAG_SW_DIS_ACK            0x00000002      /* Disable ACKs (?) */
+#define AR5K_DIAG_SW_DIS_CTS            0x00000004      /* Disable CTSs (?) */
+#define AR5K_DIAG_SW_DIS_ENC            0x00000008      /* Disable encryption (?) */
+#define AR5K_DIAG_SW_DIS_DEC            0x00000010      /* Disable decryption (?) */
+#define AR5K_DIAG_SW_DIS_TX             0x00000020      /* Disable transmit [5210] */
+#define AR5K_DIAG_SW_DIS_RX_5210        0x00000040      /* Disable recieve */
+#define AR5K_DIAG_SW_DIS_RX_5211        0x00000020
+#define AR5K_DIAG_SW_DIS_RX             (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_DIAG_SW_DIS_RX_5210 : AR5K_DIAG_SW_DIS_RX_5211)
+#define AR5K_DIAG_SW_LOOP_BACK_5210     0x00000080      /* Loopback (i guess it goes with DIS_TX) [5210] */
+#define AR5K_DIAG_SW_LOOP_BACK_5211     0x00000040
+#define AR5K_DIAG_SW_LOOP_BACK          (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211)
+#define AR5K_DIAG_SW_CORR_FCS_5210      0x00000100
+#define AR5K_DIAG_SW_CORR_FCS_5211      0x00000080
+#define AR5K_DIAG_SW_CORR_FCS           (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211)
+#define AR5K_DIAG_SW_CHAN_INFO_5210     0x00000200
+#define AR5K_DIAG_SW_CHAN_INFO_5211     0x00000100
+#define AR5K_DIAG_SW_CHAN_INFO          (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211)
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200      /* Scrambler seed (?) */
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400
+#define AR5K_DIAG_SW_EN_SCRAM_SEED      (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211)
+#define AR5K_DIAG_SW_ECO_ENABLE         0x00000400      /* [5211+] */
+#define AR5K_DIAG_SW_SCVRAM_SEED        0x0003f800      /* [5210] */
+#define AR5K_DIAG_SW_SCRAM_SEED_M       0x0001fc00      /* Scrambler seed mask (?) */
+#define AR5K_DIAG_SW_SCRAM_SEED_S       10
+#define AR5K_DIAG_SW_DIS_SEQ_INC        0x00040000      /* Disable seqnum increment (?)[5210] */
+#define AR5K_DIAG_SW_FRAME_NV0_5210     0x00080000
+#define AR5K_DIAG_SW_FRAME_NV0_5211     0x00020000
+#define AR5K_DIAG_SW_FRAME_NV0          (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211)
+#define AR5K_DIAG_SW_OBSPT_M            0x000c0000
+#define AR5K_DIAG_SW_OBSPT_S            18
+
+/*
+ * TSF (clock) register (lower 32 bits)
+ */
+#define AR5K_TSF_L32_5210       0x806c
+#define AR5K_TSF_L32_5211       0x804c
+#define AR5K_TSF_L32            (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211)
+
+/*
+ * TSF (clock) register (higher 32 bits)
+ */
+#define AR5K_TSF_U32_5210       0x8070
+#define AR5K_TSF_U32_5211       0x8050
+#define AR5K_TSF_U32            (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211)
+
+/*
+ * Last beacon timestamp register
+ */
+#define AR5K_LAST_TSTP  0x8080
+
+/*
+ * ADDAC test register [5211+]
+ */
+#define AR5K_ADDAC_TEST 0x8054
+#define AR5K_ADDAC_TEST_TXCONT 0x00000001
+
+/*
+ * Default antenna register [5211+]
+ */
+#define AR5K_DEFAULT_ANTENNA    0x8058
+
+
+
+/*
+ * Retry count register [5210]
+ */
+#define AR5K_RETRY_CNT          0x8084                  /* Register Address [5210] */
+#define AR5K_RETRY_CNT_SSH      0x0000003f      /* Station short retry count (?) */
+#define AR5K_RETRY_CNT_SLG      0x00000fc0      /* Station long retry count (?) */
+
+/*
+ * Back-off status register [5210]
+ */
+#define AR5K_BACKOFF            0x8088                  /* Register Address [5210] */
+#define AR5K_BACKOFF_CW         0x000003ff      /* Backoff Contention Window (?) */
+#define AR5K_BACKOFF_CNT        0x03ff0000      /* Backoff count (?) */
+
+
+
+/*
+ * NAV register (current)
+ */
+#define AR5K_NAV_5210           0x808c
+#define AR5K_NAV_5211           0x8084
+#define AR5K_NAV                (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_NAV_5210 : AR5K_NAV_5211)
+
+/*
+ * RTS success register
+ */
+#define AR5K_RTS_OK_5210        0x8090
+#define AR5K_RTS_OK_5211        0x8088
+#define AR5K_RTS_OK             (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_RTS_OK_5210 : AR5K_RTS_OK_5211)
+
+/*
+ * RTS failure register
+ */
+#define AR5K_RTS_FAIL_5210      0x8094
+#define AR5K_RTS_FAIL_5211      0x808c
+#define AR5K_RTS_FAIL           (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_RTS_FAIL_5210 : AR5K_RTS_FAIL_5211)
+
+/*
+ * ACK failure register
+ */
+#define AR5K_ACK_FAIL_5210      0x8098
+#define AR5K_ACK_FAIL_5211      0x8090
+#define AR5K_ACK_FAIL           (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_ACK_FAIL_5210 : AR5K_ACK_FAIL_5211)
+
+/*
+ * FCS failure register
+ */
+#define AR5K_FCS_FAIL_5210      0x809c
+#define AR5K_FCS_FAIL_5211      0x8094
+#define AR5K_FCS_FAIL           (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_FCS_FAIL_5210 : AR5K_FCS_FAIL_5211)
+
+/*
+ * Beacon count register
+ */
+#define AR5K_BEACON_CNT_5210    0x80a0
+#define AR5K_BEACON_CNT_5211    0x8098
+#define AR5K_BEACON_CNT         (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_BEACON_CNT_5210 : AR5K_BEACON_CNT_5211)
+
+
+/*===5212 Specific PCU registers===*/
+
+/*
+ * XR (eXtended Range) mode register
+ */
+#define AR5K_XRMODE                     0x80c0
+#define AR5K_XRMODE_POLL_TYPE_M         0x0000003f
+#define AR5K_XRMODE_POLL_TYPE_S         0
+#define AR5K_XRMODE_POLL_SUBTYPE_M      0x0000003c
+#define AR5K_XRMODE_POLL_SUBTYPE_S      2
+#define AR5K_XRMODE_POLL_WAIT_ALL       0x00000080
+#define AR5K_XRMODE_SIFS_DELAY          0x000fff00
+#define AR5K_XRMODE_FRAME_HOLD_M        0xfff00000
+#define AR5K_XRMODE_FRAME_HOLD_S        20
+
+/*
+ * XR delay register
+ */
+#define AR5K_XRDELAY                    0x80c4
+#define AR5K_XRDELAY_SLOT_DELAY_M       0x0000ffff
+#define AR5K_XRDELAY_SLOT_DELAY_S       0
+#define AR5K_XRDELAY_CHIRP_DELAY_M      0xffff0000
+#define AR5K_XRDELAY_CHIRP_DELAY_S      16
+
+/*
+ * XR timeout register
+ */
+#define AR5K_XRTIMEOUT                  0x80c8
+#define AR5K_XRTIMEOUT_CHIRP_M          0x0000ffff
+#define AR5K_XRTIMEOUT_CHIRP_S          0
+#define AR5K_XRTIMEOUT_POLL_M           0xffff0000
+#define AR5K_XRTIMEOUT_POLL_S           16
+
+/*
+ * XR chirp register
+ */
+#define AR5K_XRCHIRP                    0x80cc
+#define AR5K_XRCHIRP_SEND               0x00000001
+#define AR5K_XRCHIRP_GAP                0xffff0000
+
+/*
+ * XR stomp register
+ */
+#define AR5K_XRSTOMP                    0x80d0
+#define AR5K_XRSTOMP_TX                 0x00000001
+#define AR5K_XRSTOMP_RX_ABORT           0x00000002
+#define AR5K_XRSTOMP_RSSI_THRES         0x0000ff00
+
+/*
+ * First enhanced sleep register
+ */
+#define AR5K_SLEEP0                     0x80d4
+#define AR5K_SLEEP0_NEXT_DTIM           0x0007ffff
+#define AR5K_SLEEP0_NEXT_DTIM_S         0
+#define AR5K_SLEEP0_ASSUME_DTIM         0x00080000
+#define AR5K_SLEEP0_ENH_SLEEP_EN        0x00100000
+#define AR5K_SLEEP0_CABTO               0xff000000
+#define AR5K_SLEEP0_CABTO_S             24
+
+/*
+ * Second enhanced sleep register
+ */
+#define AR5K_SLEEP1                     0x80d8
+#define AR5K_SLEEP1_NEXT_TIM            0x0007ffff
+#define AR5K_SLEEP1_NEXT_TIM_S          0
+#define AR5K_SLEEP1_BEACON_TO           0xff000000
+#define AR5K_SLEEP1_BEACON_TO_S         24
+
+/*
+ * Third enhanced sleep register
+ */
+#define AR5K_SLEEP2                     0x80dc
+#define AR5K_SLEEP2_TIM_PER             0x0000ffff
+#define AR5K_SLEEP2_TIM_PER_S           0
+#define AR5K_SLEEP2_DTIM_PER            0xffff0000
+#define AR5K_SLEEP2_DTIM_PER_S          16
+
+/*
+ * BSSID mask registers
+ */
+#define AR5K_BSS_IDM0                   0x80e0
+#define AR5K_BSS_IDM1                   0x80e4
+
+/*
+ * TX power control (TPC) register
+ */
+#define AR5K_TXPC                       0x80e8
+#define AR5K_TXPC_ACK_M                 0x0000003f
+#define AR5K_TXPC_ACK_S                 0
+#define AR5K_TXPC_CTS_M                 0x00003f00
+#define AR5K_TXPC_CTS_S                 8
+#define AR5K_TXPC_CHIRP_M               0x003f0000
+#define AR5K_TXPC_CHIRP_S               22
+
+/*
+ * Profile count registers
+ */
+#define AR5K_PROFCNT_TX                 0x80ec
+#define AR5K_PROFCNT_RX                 0x80f0
+#define AR5K_PROFCNT_RXCLR              0x80f4
+#define AR5K_PROFCNT_CYCLE              0x80f8
+
+/*
+ * TSF parameter register
+ */
+#define AR5K_TSF_PARM                   0x8104
+#define AR5K_TSF_PARM_INC_M             0x000000ff
+#define AR5K_TSF_PARM_INC_S             0
+
+/*
+ * PHY error filter register
+ */
+#define AR5K_PHY_ERR_FIL                0x810c
+#define AR5K_PHY_ERR_FIL_RADAR          0x00000020
+#define AR5K_PHY_ERR_FIL_OFDM           0x00020000
+#define AR5K_PHY_ERR_FIL_CCK            0x02000000
+
+/*
+ * Rate duration register
+ */
+#define AR5K_RATE_DUR_BASE              0x8700
+#define AR5K_RATE_DUR(_n)               (AR5K_RATE_DUR_BASE + ((_n) << 2))
+
+/*===5212 end===*/
+
+/*
+ * Key table (WEP) register
+ */
+#define AR5K_KEYTABLE_0_5210            0x9000
+#define AR5K_KEYTABLE_0_5211            0x8800
+#define AR5K_KEYTABLE_5210(_n)          (AR5K_KEYTABLE_0_5210 + ((_n) << 5))
+#define AR5K_KEYTABLE_5211(_n)          (AR5K_KEYTABLE_0_5211 + ((_n) << 5))
+#define AR5K_KEYTABLE(_n)               (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_KEYTABLE_5210(_n) : AR5K_KEYTABLE_5211(_n))
+#define AR5K_KEYTABLE_OFF(_n, x)        (AR5K_KEYTABLE(_n) + (x << 2))
+#define AR5K_KEYTABLE_TYPE(_n)          AR5K_KEYTABLE_OFF(_n, 5)
+#define AR5K_KEYTABLE_TYPE_40           0x00000000
+#define AR5K_KEYTABLE_TYPE_104          0x00000001
+#define AR5K_KEYTABLE_TYPE_128          0x00000003
+#define AR5K_KEYTABLE_TYPE_TKIP         0x00000004      /* [5212+] */
+#define AR5K_KEYTABLE_TYPE_AES          0x00000005      /* [5211+] */
+#define AR5K_KEYTABLE_TYPE_CCM          0x00000006      /* [5212+] */
+#define AR5K_KEYTABLE_TYPE_NULL         0x00000007      /* [5211+] */
+#define AR5K_KEYTABLE_ANTENNA           0x00000008      /* [5212+] */
+#define AR5K_KEYTABLE_MAC0(_n)          AR5K_KEYTABLE_OFF(_n, 6)
+#define AR5K_KEYTABLE_MAC1(_n)          AR5K_KEYTABLE_OFF(_n, 7)
+#define AR5K_KEYTABLE_VALID             0x00008000
+
+/* WEP 40-bit   = 40-bit  entered key + 24 bit IV = 64-bit
+ * WEP 104-bit  = 104-bit entered key + 24-bit IV = 128-bit
+ * WEP 128-bit  = 128-bit entered key + 24 bit IV = 152-bit
+ *
+ * Some vendors have introduced bigger WEP keys to address
+ * security vulnerabilities in WEP. This includes:
+ *
+ * WEP 232-bit = 232-bit entered key + 24 bit IV = 256-bit
+ *
+ * We can expand this if we find ar5k Atheros cards with a larger
+ * key table size.
+ */
+#define AR5K_KEYTABLE_SIZE_5210         64
+#define AR5K_KEYTABLE_SIZE_5211         128
+#define AR5K_KEYTABLE_SIZE              (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211)
+
+
+/*===PHY REGISTERS===*/
+
+/*
+ * PHY register
+ */
+#define AR5K_PHY_BASE                   0x9800
+#define AR5K_PHY(_n)                    (AR5K_PHY_BASE + ((_n) << 2))
+#define AR5K_PHY_SHIFT_2GHZ             0x00004007
+#define AR5K_PHY_SHIFT_5GHZ             0x00000007
+
+/*
+ * PHY frame control register [5110] /turbo mode register [5111+]
+ *
+ * There is another frame control register for [5111+]
+ * at address 0x9944 (see below) but the 2 first flags
+ * are common here between 5110 frame control register
+ * and [5111+] turbo mode register, so this also works as
+ * a "turbo mode register" for 5110. We treat this one as
+ * a frame control register for 5110 below.
+ */
+#define AR5K_PHY_TURBO                  0x9804
+#define AR5K_PHY_TURBO_MODE             0x00000001
+#define AR5K_PHY_TURBO_SHORT            0x00000002
+
+/*
+ * PHY agility command register
+ */
+#define AR5K_PHY_AGC                    0x9808
+#define AR5K_PHY_AGC_DISABLE            0x08000000
+
+/*
+ * PHY timing register [5112+]
+ */
+#define AR5K_PHY_TIMING_3               0x9814
+#define AR5K_PHY_TIMING_3_DSC_MAN       0xfffe0000
+#define AR5K_PHY_TIMING_3_DSC_MAN_S     17
+#define AR5K_PHY_TIMING_3_DSC_EXP       0x0001e000
+#define AR5K_PHY_TIMING_3_DSC_EXP_S     13
+
+/*
+ * PHY chip revision register
+ */
+#define AR5K_PHY_CHIP_ID                0x9818
+
+/*
+ * PHY activation register
+ */
+#define AR5K_PHY_ACT                    0x981c
+#define AR5K_PHY_ACT_ENABLE             0x00000001
+#define AR5K_PHY_ACT_DISABLE            0x00000002
+
+/*
+ * PHY signal register
+ */
+#define AR5K_PHY_SIG                    0x9858
+#define AR5K_PHY_SIG_FIRSTEP            0x0003f000
+#define AR5K_PHY_SIG_FIRSTEP_S          12
+#define AR5K_PHY_SIG_FIRPWR             0x03fc0000
+#define AR5K_PHY_SIG_FIRPWR_S           18
+
+/*
+ * PHY coarse agility control register
+ */
+#define AR5K_PHY_AGCCOARSE              0x985c
+#define AR5K_PHY_AGCCOARSE_LO           0x00007f80
+#define AR5K_PHY_AGCCOARSE_LO_S         7
+#define AR5K_PHY_AGCCOARSE_HI           0x003f8000
+#define AR5K_PHY_AGCCOARSE_HI_S         15
+
+/*
+ * PHY agility control register
+ */
+#define AR5K_PHY_AGCCTL                 0x9860                  /* Register address */
+#define AR5K_PHY_AGCCTL_CAL             0x00000001      /* Enable PHY calibration */
+#define AR5K_PHY_AGCCTL_NF              0x00000002      /* Enable Noise Floor calibration */
+
+/*
+ * PHY noise floor status register
+ */
+#define AR5K_PHY_NF                     0x9864
+#define AR5K_PHY_NF_M                   0x000001ff
+#define AR5K_PHY_NF_ACTIVE              0x00000100
+#define AR5K_PHY_NF_RVAL(_n)            (((_n) >> 19) & AR5K_PHY_NF_M)
+#define AR5K_PHY_NF_AVAL(_n)            (-((_n) ^ AR5K_PHY_NF_M) + 1)
+#define AR5K_PHY_NF_SVAL(_n)            (((_n) & AR5K_PHY_NF_M) | (1 << 9))
+
+/*
+ * PHY ADC saturation register [5110]
+ */
+#define AR5K_PHY_ADCSAT                 0x9868
+#define AR5K_PHY_ADCSAT_ICNT            0x0001f800
+#define AR5K_PHY_ADCSAT_ICNT_S          11
+#define AR5K_PHY_ADCSAT_THR             0x000007e0
+#define AR5K_PHY_ADCSAT_THR_S           5
+
+/*
+ * PHY sleep registers [5112+]
+ */
+#define AR5K_PHY_SCR                    0x9870
+#define AR5K_PHY_SCR_32MHZ              0x0000001f
+#define AR5K_PHY_SLMT                   0x9874
+#define AR5K_PHY_SLMT_32MHZ             0x0000007f
+#define AR5K_PHY_SCAL                   0x9878
+#define AR5K_PHY_SCAL_32MHZ             0x0000000e
+
+/*
+ * PHY PLL (Phase Locked Loop) control register
+ */
+#define AR5K_PHY_PLL                    0x987c
+#define AR5K_PHY_PLL_20MHZ              0x13    /* For half rate (?) [5111+] */
+#define AR5K_PHY_PLL_40MHZ_5211         0x18    /* For 802.11a */
+#define AR5K_PHY_PLL_40MHZ_5212         0x000000aa
+#define AR5K_PHY_PLL_40MHZ              (ah->ah_version == AR5K_AR5211 ? \
+                                        AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212)
+#define AR5K_PHY_PLL_44MHZ_5211         0x19    /* For 802.11b/g */
+#define AR5K_PHY_PLL_44MHZ_5212         0x000000ab
+#define AR5K_PHY_PLL_44MHZ              (ah->ah_version == AR5K_AR5211 ? \
+                                        AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212)
+#define AR5K_PHY_PLL_RF5111             0x00000000
+#define AR5K_PHY_PLL_RF5112             0x00000040
+
+/*
+ * RF Buffer register
+ *
+ * There are some special control registers on the RF chip
+ * that hold various operation settings related mostly to
+ * the analog parts (channel, gain adjustment etc).
+ *
+ * We don't write on those registers directly but
+ * we send a data packet on the buffer register and
+ * then write on another special register to notify hw
+ * to apply the settings. This is done so that control registers
+ * can be dynamicaly programmed during operation and the settings
+ * are applied faster on the hw.
+ *
+ * We sent such data packets during rf initialization and channel change
+ * through ath5k_hw_rf*_rfregs and ath5k_hw_rf*_channel functions.
+ *
+ * The data packets we send during initializadion are inside ath5k_ini_rf
+ * struct (see ath5k_hw.h) and each one is related to an "rf register bank".
+ * We use *rfregs functions to modify them  acording to current operation
+ * mode and eeprom values and pass them all together to the chip.
+ *
+ * It's obvious from the code that 0x989c is the buffer register but
+ * for the other special registers that we write to after sending each
+ * packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers
+ * for now. It's interesting that they are also used for some other operations.
+ *
+ * Also check out hw.h and U.S. Patent 6677779 B1 (about buffer
+ * registers and control registers):
+ *
+ * http://www.google.com/patents?id=qNURAAAAEBAJ
+ */
+
+#define AR5K_RF_BUFFER                  0x989c
+#define AR5K_RF_BUFFER_CONTROL_0        0x98c0  /* Channel on 5110 */
+#define AR5K_RF_BUFFER_CONTROL_1        0x98c4  /* Bank 7 on 5112 */
+#define AR5K_RF_BUFFER_CONTROL_2        0x98cc  /* Bank 7 on 5111 */
+
+#define AR5K_RF_BUFFER_CONTROL_3        0x98d0  /* Bank 2 on 5112 */
+                                                /* Channel set on 5111 */
+                                                /* Used to read radio revision*/
+
+#define AR5K_RF_BUFFER_CONTROL_4        0x98d4  /* RF Stage register on 5110 */
+                                                /* Bank 0,1,2,6 on 5111 */
+                                                /* Bank 1 on 5112 */
+                                                /* Used during activation on 5111 */
+
+#define AR5K_RF_BUFFER_CONTROL_5        0x98d8  /* Bank 3 on 5111 */
+                                                /* Used during activation on 5111 */
+                                                /* Channel on 5112 */
+                                                /* Bank 6 on 5112 */
+
+#define AR5K_RF_BUFFER_CONTROL_6        0x98dc  /* Bank 3 on 5112 */
+
+/*
+ * PHY RF stage register [5210]
+ */
+#define AR5K_PHY_RFSTG                  0x98d4
+#define AR5K_PHY_RFSTG_DISABLE          0x00000021
+
+/*
+ * PHY receiver delay register [5111+]
+ */
+#define AR5K_PHY_RX_DELAY               0x9914
+#define AR5K_PHY_RX_DELAY_M             0x00003fff
+
+/*
+ * PHY timing I(nphase) Q(adrature) control register [5111+]
+ */
+#define AR5K_PHY_IQ                     0x9920          /* Register address */
+#define AR5K_PHY_IQ_CORR_Q_Q_COFF       0x0000001f      /* Mask for q correction info */
+#define AR5K_PHY_IQ_CORR_Q_I_COFF       0x000007e0      /* Mask for i correction info */
+#define AR5K_PHY_IQ_CORR_Q_I_COFF_S     5
+#define AR5K_PHY_IQ_CORR_ENABLE         0x00000800      /* Enable i/q correction */
+#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX     0x0000f000
+#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S   12
+#define AR5K_PHY_IQ_RUN                 0x00010000      /* Run i/q calibration */
+
+
+/*
+ * PHY PAPD probe register [5111+ (?)]
+ * Is this only present in 5212 ?
+ * Because it's always 0 in 5211 initialization code
+ */
+#define AR5K_PHY_PAPD_PROBE             0x9930
+#define AR5K_PHY_PAPD_PROBE_TXPOWER     0x00007e00
+#define AR5K_PHY_PAPD_PROBE_TXPOWER_S   9
+#define AR5K_PHY_PAPD_PROBE_TX_NEXT     0x00008000
+#define AR5K_PHY_PAPD_PROBE_TYPE        0x01800000      /* [5112+] */
+#define AR5K_PHY_PAPD_PROBE_TYPE_S      23
+#define AR5K_PHY_PAPD_PROBE_TYPE_OFDM   0
+#define AR5K_PHY_PAPD_PROBE_TYPE_XR     1
+#define AR5K_PHY_PAPD_PROBE_TYPE_CCK    2
+#define AR5K_PHY_PAPD_PROBE_GAINF       0xfe000000
+#define AR5K_PHY_PAPD_PROBE_GAINF_S     25
+#define AR5K_PHY_PAPD_PROBE_INI_5111    0x00004883      /* [5212+] */
+#define AR5K_PHY_PAPD_PROBE_INI_5112    0x00004882      /* [5212+] */
+
+
+/*
+ * PHY TX rate power registers [5112+]
+ */
+#define AR5K_PHY_TXPOWER_RATE1                  0x9934
+#define AR5K_PHY_TXPOWER_RATE2                  0x9938
+#define AR5K_PHY_TXPOWER_RATE_MAX               0x993c
+#define AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE    0x00000040
+#define AR5K_PHY_TXPOWER_RATE3                  0xa234
+#define AR5K_PHY_TXPOWER_RATE4                  0xa238
+
+/*
+ * PHY frame control register [5111+]
+ */
+#define AR5K_PHY_FRAME_CTL_5210         0x9804
+#define AR5K_PHY_FRAME_CTL_5211         0x9944
+#define AR5K_PHY_FRAME_CTL              (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211)
+/*---[5111+]---*/
+#define AR5K_PHY_FRAME_CTL_TX_CLIP      0x00000038
+#define AR5K_PHY_FRAME_CTL_TX_CLIP_S    3
+/*---[5110/5111]---*/
+#define AR5K_PHY_FRAME_CTL_TIMING_ERR   0x01000000
+#define AR5K_PHY_FRAME_CTL_PARITY_ERR   0x02000000
+#define AR5K_PHY_FRAME_CTL_ILLRATE_ERR  0x04000000      /* illegal rate */
+#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR   0x08000000      /* illegal length */
+#define AR5K_PHY_FRAME_CTL_SERVICE_ERR  0x20000000
+#define AR5K_PHY_FRAME_CTL_TXURN_ERR    0x40000000      /* tx underrun */
+#define AR5K_PHY_FRAME_CTL_INI          AR5K_PHY_FRAME_CTL_SERVICE_ERR | \
+                        AR5K_PHY_FRAME_CTL_TXURN_ERR | \
+                        AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \
+                        AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \
+                        AR5K_PHY_FRAME_CTL_PARITY_ERR | \
+                        AR5K_PHY_FRAME_CTL_TIMING_ERR
+
+/*
+ * PHY radar detection register [5111+]
+ */
+#define AR5K_PHY_RADAR                  0x9954
+
+/* Radar enable                         ........ ........ ........ .......1 */
+#define AR5K_PHY_RADAR_ENABLE           0x00000001
+#define AR5K_PHY_RADAR_DISABLE          0x00000000
+#define AR5K_PHY_RADAR_ENABLE_S         0
+
+/* This is the value found on the card  .1.111.1 .1.1.... 111....1 1...1...
+at power on. */
+#define AR5K_PHY_RADAR_PWONDEF_AR5213   0x5d50e188
+
+/* This is the value found on the card  .1.1.111 ..11...1 .1...1.1 1...11.1
+after DFS is enabled */
+#define AR5K_PHY_RADAR_ENABLED_AR5213   0x5731458d
+
+/* Finite Impulse Response (FIR) filter .1111111 ........ ........ ........
+ * power out threshold.
+ * 7-bits, standard power range {0..127} in 1/2 dBm units. */
+#define AR5K_PHY_RADAR_FIRPWROUTTHR     0x7f000000
+#define AR5K_PHY_RADAR_FIRPWROUTTHR_S   24
+
+/* Radar RSSI/SNR threshold.            ........ 111111.. ........ ........
+ * 6-bits, dBm range {0..63} in dBm units. */
+#define AR5K_PHY_RADAR_RADARRSSITHR     0x00fc0000
+#define AR5K_PHY_RADAR_RADARRSSITHR_S   18
+
+/* Pulse height threshold               ........ ......11 1111.... ........
+ * 6-bits, dBm range {0..63} in dBm units. */
+#define AR5K_PHY_RADAR_PULSEHEIGHTTHR   0x0003f000
+#define AR5K_PHY_RADAR_PULSEHEIGHTTHR_S 12
+
+/* Pulse RSSI/SNR threshold             ........ ........ ....1111 11......
+ * 6-bits, dBm range {0..63} in dBm units. */
+#define AR5K_PHY_RADAR_PULSERSSITHR     0x00000fc0
+#define AR5K_PHY_RADAR_PULSERSSITHR_S   6
+
+/* Inband threshold                     ........ ........ ........ ..11111.
+ * 5-bits, units unknown {0..31} (? MHz ?) */
+#define AR5K_PHY_RADAR_INBANDTHR        0x0000003e
+#define AR5K_PHY_RADAR_INBANDTHR_S      1
+
+/*
+ * PHY antenna switch table registers [5110]
+ */
+#define AR5K_PHY_ANT_SWITCH_TABLE_0     0x9960
+#define AR5K_PHY_ANT_SWITCH_TABLE_1     0x9964
+
+/*
+ * PHY clock sleep registers [5112+]
+ */
+#define AR5K_PHY_SCLOCK                 0x99f0
+#define AR5K_PHY_SCLOCK_32MHZ           0x0000000c
+#define AR5K_PHY_SDELAY                 0x99f4
+#define AR5K_PHY_SDELAY_32MHZ           0x000000ff
+#define AR5K_PHY_SPENDING               0x99f8
+#define AR5K_PHY_SPENDING_RF5111        0x00000018
+#define AR5K_PHY_SPENDING_RF5112        0x00000014
+
+/*
+ * Misc PHY/radio registers [5110 - 5111]
+ */
+#define AR5K_BB_GAIN_BASE               0x9b00 /* BaseBand Amplifier Gain table base address */
+#define AR5K_BB_GAIN(_n)                (AR5K_BB_GAIN_BASE + ((_n) << 2))
+#define AR5K_RF_GAIN_BASE               0x9a00 /* RF Amplrifier Gain table base address */
+#define AR5K_RF_GAIN(_n)                (AR5K_RF_GAIN_BASE + ((_n) << 2))
+
+/*
+ * PHY timing IQ calibration result register [5111+]
+ */
+#define AR5K_PHY_IQRES_CAL_PWR_I        0x9c10 /* I (Inphase) power value */
+#define AR5K_PHY_IQRES_CAL_PWR_Q        0x9c14 /* Q (Quadrature) power value */
+#define AR5K_PHY_IQRES_CAL_CORR         0x9c18  /* I/Q Correlation */
+
+/*
+ * PHY current RSSI register [5111+]
+ */
+#define AR5K_PHY_CURRENT_RSSI           0x9c1c
+
+/*
+ * PHY PCDAC TX power table
+ */
+#define AR5K_PHY_PCDAC_TXPOWER_BASE_5211        0xa180
+#define AR5K_PHY_PCDAC_TXPOWER_BASE_5413        0xa280
+#define AR5K_PHY_PCDAC_TXPOWER_BASE     (ah->ah_radio >= AR5K_RF5413 ? \
+                                        AR5K_PHY_PCDAC_TXPOWER_BASE_5413 :\
+                                        AR5K_PHY_PCDAC_TXPOWER_BASE_5211)
+#define AR5K_PHY_PCDAC_TXPOWER(_n)      (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2))
+
+/*
+ * PHY mode register [5111+]
+ */
+#define AR5K_PHY_MODE                   0x0a200         /* Register address */
+#define AR5K_PHY_MODE_MOD               0x00000001      /* PHY Modulation mask*/
+#define AR5K_PHY_MODE_MOD_OFDM          0
+#define AR5K_PHY_MODE_MOD_CCK           1
+#define AR5K_PHY_MODE_FREQ              0x00000002      /* Freq mode mask */
+#define AR5K_PHY_MODE_FREQ_5GHZ         0
+#define AR5K_PHY_MODE_FREQ_2GHZ         2
+#define AR5K_PHY_MODE_MOD_DYN           0x00000004      /* Dynamic OFDM/CCK mode mask [5112+] */
+#define AR5K_PHY_MODE_RAD               0x00000008      /* [5212+] */
+#define AR5K_PHY_MODE_RAD_RF5111        0
+#define AR5K_PHY_MODE_RAD_RF5112        8
+#define AR5K_PHY_MODE_XR                0x00000010      /* [5112+] */
+
+/*
+ * PHY CCK transmit control register [5111+ (?)]
+ */
+#define AR5K_PHY_CCKTXCTL               0xa204
+#define AR5K_PHY_CCKTXCTL_WORLD         0x00000000
+#define AR5K_PHY_CCKTXCTL_JAPAN         0x00000010
+
+/*
+ * PHY 2GHz gain register [5111+]
+ */
+#define AR5K_PHY_GAIN_2GHZ              0xa20c
+#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX  0x00fc0000
+#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S        18
+#define AR5K_PHY_GAIN_2GHZ_INI_5111     0x6480416c
diff --git a/drivers/net/wireless/ath5k/regdom.c b/drivers/net/wireless/ath5k/regdom.c
new file mode 100644
index 000000000000..e851957dacfd
--- /dev/null
+++ b/drivers/net/wireless/ath5k/regdom.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) 2004, 2005 Reyk Floeter <reyk@vantronix.net>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * Basic regulation domain extensions for the IEEE 802.11 stack
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+
+#include "regdom.h"
+
+static const struct ath5k_regdommap {
+        enum ath5k_regdom dmn;
+        enum ath5k_regdom dmn5;
+        enum ath5k_regdom dmn2;
+} r_map[] = {
+        { DMN_DEFAULT,          DMN_DEBUG,      DMN_DEBUG },
+        { DMN_NULL_WORLD,       DMN_NULL,       DMN_WORLD },
+        { DMN_NULL_ETSIB,       DMN_NULL,       DMN_ETSIB },
+        { DMN_NULL_ETSIC,       DMN_NULL,       DMN_ETSIC },
+        { DMN_FCC1_FCCA,        DMN_FCC1,       DMN_FCCA },
+        { DMN_FCC1_WORLD,       DMN_FCC1,       DMN_WORLD },
+        { DMN_FCC2_FCCA,        DMN_FCC2,       DMN_FCCA },
+        { DMN_FCC2_WORLD,       DMN_FCC2,       DMN_WORLD },
+        { DMN_FCC2_ETSIC,       DMN_FCC2,       DMN_ETSIC },
+        { DMN_FRANCE_NULL,      DMN_ETSI3,      DMN_ETSI3 },
+        { DMN_FCC3_FCCA,        DMN_FCC3,       DMN_WORLD },
+        { DMN_ETSI1_WORLD,      DMN_ETSI1,      DMN_WORLD },
+        { DMN_ETSI3_ETSIA,      DMN_ETSI3,      DMN_WORLD },
+        { DMN_ETSI2_WORLD,      DMN_ETSI2,      DMN_WORLD },
+        { DMN_ETSI3_WORLD,      DMN_ETSI3,      DMN_WORLD },
+        { DMN_ETSI4_WORLD,      DMN_ETSI4,      DMN_WORLD },
+        { DMN_ETSI4_ETSIC,      DMN_ETSI4,      DMN_ETSIC },
+        { DMN_ETSI5_WORLD,      DMN_ETSI5,      DMN_WORLD },
+        { DMN_ETSI6_WORLD,      DMN_ETSI6,      DMN_WORLD },
+        { DMN_ETSI_NULL,        DMN_ETSI1,      DMN_ETSI1 },
+        { DMN_MKK1_MKKA,        DMN_MKK1,       DMN_MKKA },
+        { DMN_MKK1_MKKB,        DMN_MKK1,       DMN_MKKA },
+        { DMN_APL4_WORLD,       DMN_APL4,       DMN_WORLD },
+        { DMN_MKK2_MKKA,        DMN_MKK2,       DMN_MKKA },
+        { DMN_APL_NULL,         DMN_APL1,       DMN_NULL },
+        { DMN_APL2_WORLD,       DMN_APL2,       DMN_WORLD },
+        { DMN_APL2_APLC,        DMN_APL2,       DMN_WORLD },
+        { DMN_APL3_WORLD,       DMN_APL3,       DMN_WORLD },
+        { DMN_MKK1_FCCA,        DMN_MKK1,       DMN_FCCA },
+        { DMN_APL2_APLD,        DMN_APL2,       DMN_APLD },
+        { DMN_MKK1_MKKA1,       DMN_MKK1,       DMN_MKKA },
+        { DMN_MKK1_MKKA2,       DMN_MKK1,       DMN_MKKA },
+        { DMN_APL1_WORLD,       DMN_APL1,       DMN_WORLD },
+        { DMN_APL1_FCCA,        DMN_APL1,       DMN_FCCA },
+        { DMN_APL1_APLA,        DMN_APL1,       DMN_WORLD },
+        { DMN_APL1_ETSIC,       DMN_APL1,       DMN_ETSIC },
+        { DMN_APL2_ETSIC,       DMN_APL2,       DMN_ETSIC },
+        { DMN_APL5_WORLD,       DMN_APL5,       DMN_WORLD },
+        { DMN_WOR0_WORLD,       DMN_WORLD,      DMN_WORLD },
+        { DMN_WOR1_WORLD,       DMN_WORLD,      DMN_WORLD },
+        { DMN_WOR2_WORLD,       DMN_WORLD,      DMN_WORLD },
+        { DMN_WOR3_WORLD,       DMN_WORLD,      DMN_WORLD },
+        { DMN_WOR4_WORLD,       DMN_WORLD,      DMN_WORLD },
+        { DMN_WOR5_ETSIC,       DMN_WORLD,      DMN_WORLD },
+        { DMN_WOR01_WORLD,      DMN_WORLD,      DMN_WORLD },
+        { DMN_WOR02_WORLD,      DMN_WORLD,      DMN_WORLD },
+        { DMN_EU1_WORLD,        DMN_ETSI1,      DMN_WORLD },
+        { DMN_WOR9_WORLD,       DMN_WORLD,      DMN_WORLD },
+        { DMN_WORA_WORLD,       DMN_WORLD,      DMN_WORLD },
+};
+
+enum ath5k_regdom ath5k_regdom2flag(enum ath5k_regdom dmn, u16 mhz)
+{
+        unsigned int i;
+
+        for (i = 0; i < ARRAY_SIZE(r_map); i++) {
+                if (r_map[i].dmn == dmn) {
+                        if (mhz >= 2000 && mhz <= 3000)
+                                return r_map[i].dmn2;
+                        if (mhz >= IEEE80211_CHANNELS_5GHZ_MIN &&
+                                        mhz <= IEEE80211_CHANNELS_5GHZ_MAX)
+                                return r_map[i].dmn5;
+                }
+        }
+
+        return DMN_DEBUG;
+}
+
+u16 ath5k_regdom_from_ieee(enum ath5k_regdom ieee)
+{
+        u32 regdomain = (u32)ieee;
+
+        /*
+         * Use the default regulation domain if the value is empty
+         * or not supported by the net80211 regulation code.
+         */
+        if (ath5k_regdom2flag(regdomain, IEEE80211_CHANNELS_5GHZ_MIN) ==
+                        DMN_DEBUG)
+                return (u16)AR5K_TUNE_REGDOMAIN;
+
+        /* It is supported, just return the value */
+        return regdomain;
+}
+
+enum ath5k_regdom ath5k_regdom_to_ieee(u16 regdomain)
+{
+        enum ath5k_regdom ieee = (enum ath5k_regdom)regdomain;
+
+        return ieee;
+}
+
diff --git a/drivers/net/wireless/ath5k/regdom.h b/drivers/net/wireless/ath5k/regdom.h
new file mode 100644
index 000000000000..f7d3c66e594e
--- /dev/null
+++ b/drivers/net/wireless/ath5k/regdom.h
@@ -0,0 +1,500 @@
+/*
+ * Copyright (c) 2004, 2005 Reyk Floeter <reyk@openbsd.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _IEEE80211_REGDOMAIN_H_
+#define _IEEE80211_REGDOMAIN_H_
+
+#include <linux/types.h>
+
+/* Default regulation domain if stored value EEPROM value is invalid */
+#define AR5K_TUNE_REGDOMAIN     DMN_FCC2_FCCA   /* Canada */
+#define AR5K_TUNE_CTRY          CTRY_DEFAULT
+
+
+enum ath5k_regdom {
+        DMN_DEFAULT             = 0x00,
+        DMN_NULL_WORLD          = 0x03,
+        DMN_NULL_ETSIB          = 0x07,
+        DMN_NULL_ETSIC          = 0x08,
+        DMN_FCC1_FCCA           = 0x10,
+        DMN_FCC1_WORLD          = 0x11,
+        DMN_FCC2_FCCA           = 0x20,
+        DMN_FCC2_WORLD          = 0x21,
+        DMN_FCC2_ETSIC          = 0x22,
+        DMN_FRANCE_NULL         = 0x31,
+        DMN_FCC3_FCCA           = 0x3A,
+        DMN_ETSI1_WORLD         = 0x37,
+        DMN_ETSI3_ETSIA         = 0x32,
+        DMN_ETSI2_WORLD         = 0x35,
+        DMN_ETSI3_WORLD         = 0x36,
+        DMN_ETSI4_WORLD         = 0x30,
+        DMN_ETSI4_ETSIC         = 0x38,
+        DMN_ETSI5_WORLD         = 0x39,
+        DMN_ETSI6_WORLD         = 0x34,
+        DMN_ETSI_NULL           = 0x33,
+        DMN_MKK1_MKKA           = 0x40,
+        DMN_MKK1_MKKB           = 0x41,
+        DMN_APL4_WORLD          = 0x42,
+        DMN_MKK2_MKKA           = 0x43,
+        DMN_APL_NULL            = 0x44,
+        DMN_APL2_WORLD          = 0x45,
+        DMN_APL2_APLC           = 0x46,
+        DMN_APL3_WORLD          = 0x47,
+        DMN_MKK1_FCCA           = 0x48,
+        DMN_APL2_APLD           = 0x49,
+        DMN_MKK1_MKKA1          = 0x4A,
+        DMN_MKK1_MKKA2          = 0x4B,
+        DMN_APL1_WORLD          = 0x52,
+        DMN_APL1_FCCA           = 0x53,
+        DMN_APL1_APLA           = 0x54,
+        DMN_APL1_ETSIC          = 0x55,
+        DMN_APL2_ETSIC          = 0x56,
+        DMN_APL5_WORLD          = 0x58,
+        DMN_WOR0_WORLD          = 0x60,
+        DMN_WOR1_WORLD          = 0x61,
+        DMN_WOR2_WORLD          = 0x62,
+        DMN_WOR3_WORLD          = 0x63,
+        DMN_WOR4_WORLD          = 0x64,
+        DMN_WOR5_ETSIC          = 0x65,
+        DMN_WOR01_WORLD         = 0x66,
+        DMN_WOR02_WORLD         = 0x67,
+        DMN_EU1_WORLD           = 0x68,
+        DMN_WOR9_WORLD          = 0x69,
+        DMN_WORA_WORLD          = 0x6A,
+
+        DMN_APL1                = 0xf0000001,
+        DMN_APL2                = 0xf0000002,
+        DMN_APL3                = 0xf0000004,
+        DMN_APL4                = 0xf0000008,
+        DMN_APL5                = 0xf0000010,
+        DMN_ETSI1               = 0xf0000020,
+        DMN_ETSI2               = 0xf0000040,
+        DMN_ETSI3               = 0xf0000080,
+        DMN_ETSI4               = 0xf0000100,
+        DMN_ETSI5               = 0xf0000200,
+        DMN_ETSI6               = 0xf0000400,
+        DMN_ETSIA               = 0xf0000800,
+        DMN_ETSIB               = 0xf0001000,
+        DMN_ETSIC               = 0xf0002000,
+        DMN_FCC1                = 0xf0004000,
+        DMN_FCC2                = 0xf0008000,
+        DMN_FCC3                = 0xf0010000,
+        DMN_FCCA                = 0xf0020000,
+        DMN_APLD                = 0xf0040000,
+        DMN_MKK1                = 0xf0080000,
+        DMN_MKK2                = 0xf0100000,
+        DMN_MKKA                = 0xf0200000,
+        DMN_NULL                = 0xf0400000,
+        DMN_WORLD               = 0xf0800000,
+        DMN_DEBUG               = 0xf1000000    /* used for debugging */
+};
+
+#define IEEE80211_DMN(_d)       ((_d) & ~0xf0000000)
+
+enum ath5k_countrycode {
+        CTRY_DEFAULT            = 0,   /* Default domain (NA) */
+        CTRY_ALBANIA            = 8,   /* Albania */
+        CTRY_ALGERIA            = 12,  /* Algeria */
+        CTRY_ARGENTINA          = 32,  /* Argentina */
+        CTRY_ARMENIA            = 51,  /* Armenia */
+        CTRY_AUSTRALIA          = 36,  /* Australia */
+        CTRY_AUSTRIA            = 40,  /* Austria */
+        CTRY_AZERBAIJAN         = 31,  /* Azerbaijan */
+        CTRY_BAHRAIN            = 48,  /* Bahrain */
+        CTRY_BELARUS            = 112, /* Belarus */
+        CTRY_BELGIUM            = 56,  /* Belgium */
+        CTRY_BELIZE             = 84,  /* Belize */
+        CTRY_BOLIVIA            = 68,  /* Bolivia */
+        CTRY_BRAZIL             = 76,  /* Brazil */
+        CTRY_BRUNEI_DARUSSALAM  = 96,  /* Brunei Darussalam */
+        CTRY_BULGARIA           = 100, /* Bulgaria */
+        CTRY_CANADA             = 124, /* Canada */
+        CTRY_CHILE              = 152, /* Chile */
+        CTRY_CHINA              = 156, /* People's Republic of China */
+        CTRY_COLOMBIA           = 170, /* Colombia */
+        CTRY_COSTA_RICA         = 188, /* Costa Rica */
+        CTRY_CROATIA            = 191, /* Croatia */
+        CTRY_CYPRUS             = 196, /* Cyprus */
+        CTRY_CZECH              = 203, /* Czech Republic */
+        CTRY_DENMARK            = 208, /* Denmark */
+        CTRY_DOMINICAN_REPUBLIC = 214, /* Dominican Republic */
+        CTRY_ECUADOR            = 218, /* Ecuador */
+        CTRY_EGYPT              = 818, /* Egypt */
+        CTRY_EL_SALVADOR        = 222, /* El Salvador */
+        CTRY_ESTONIA            = 233, /* Estonia */
+        CTRY_FAEROE_ISLANDS     = 234, /* Faeroe Islands */
+        CTRY_FINLAND            = 246, /* Finland */
+        CTRY_FRANCE             = 250, /* France */
+        CTRY_FRANCE2            = 255, /* France2 */
+        CTRY_GEORGIA            = 268, /* Georgia */
+        CTRY_GERMANY            = 276, /* Germany */
+        CTRY_GREECE             = 300, /* Greece */
+        CTRY_GUATEMALA          = 320, /* Guatemala */
+        CTRY_HONDURAS           = 340, /* Honduras */
+        CTRY_HONG_KONG          = 344, /* Hong Kong S.A.R., P.R.C. */
+        CTRY_HUNGARY            = 348, /* Hungary */
+        CTRY_ICELAND            = 352, /* Iceland */
+        CTRY_INDIA              = 356, /* India */
+        CTRY_INDONESIA          = 360, /* Indonesia */
+        CTRY_IRAN               = 364, /* Iran */
+        CTRY_IRAQ               = 368, /* Iraq */
+        CTRY_IRELAND            = 372, /* Ireland */
+        CTRY_ISRAEL             = 376, /* Israel */
+        CTRY_ITALY              = 380, /* Italy */
+        CTRY_JAMAICA            = 388, /* Jamaica */
+        CTRY_JAPAN              = 392, /* Japan */
+        CTRY_JAPAN1             = 393, /* Japan (JP1) */
+        CTRY_JAPAN2             = 394, /* Japan (JP0) */
+        CTRY_JAPAN3             = 395, /* Japan (JP1-1) */
+        CTRY_JAPAN4             = 396, /* Japan (JE1) */
+        CTRY_JAPAN5             = 397, /* Japan (JE2) */
+        CTRY_JORDAN             = 400, /* Jordan */
+        CTRY_KAZAKHSTAN         = 398, /* Kazakhstan */
+        CTRY_KENYA              = 404, /* Kenya */
+        CTRY_KOREA_NORTH        = 408, /* North Korea */
+        CTRY_KOREA_ROC          = 410, /* South Korea */
+        CTRY_KOREA_ROC2         = 411, /* South Korea */
+        CTRY_KUWAIT             = 414, /* Kuwait */
+        CTRY_LATVIA             = 428, /* Latvia */
+        CTRY_LEBANON            = 422, /* Lebanon */
+        CTRY_LIBYA              = 434, /* Libya */
+        CTRY_LIECHTENSTEIN      = 438, /* Liechtenstein */
+        CTRY_LITHUANIA          = 440, /* Lithuania */
+        CTRY_LUXEMBOURG         = 442, /* Luxembourg */
+        CTRY_MACAU              = 446, /* Macau */
+        CTRY_MACEDONIA          = 807, /* Republic of Macedonia */
+        CTRY_MALAYSIA           = 458, /* Malaysia */
+        CTRY_MEXICO             = 484, /* Mexico */
+        CTRY_MONACO             = 492, /* Principality of Monaco */
+        CTRY_MOROCCO            = 504, /* Morocco */
+        CTRY_NETHERLANDS        = 528, /* Netherlands */
+        CTRY_NEW_ZEALAND        = 554, /* New Zealand */
+        CTRY_NICARAGUA          = 558, /* Nicaragua */
+        CTRY_NORWAY             = 578, /* Norway */
+        CTRY_OMAN               = 512, /* Oman */
+        CTRY_PAKISTAN           = 586, /* Islamic Republic of Pakistan */
+        CTRY_PANAMA             = 591, /* Panama */
+        CTRY_PARAGUAY           = 600, /* Paraguay */
+        CTRY_PERU               = 604, /* Peru */
+        CTRY_PHILIPPINES        = 608, /* Republic of the Philippines */
+        CTRY_POLAND             = 616, /* Poland */
+        CTRY_PORTUGAL           = 620, /* Portugal */
+        CTRY_PUERTO_RICO        = 630, /* Puerto Rico */
+        CTRY_QATAR              = 634, /* Qatar */
+        CTRY_ROMANIA            = 642, /* Romania */
+        CTRY_RUSSIA             = 643, /* Russia */
+        CTRY_SAUDI_ARABIA       = 682, /* Saudi Arabia */
+        CTRY_SINGAPORE          = 702, /* Singapore */
+        CTRY_SLOVAKIA           = 703, /* Slovak Republic */
+        CTRY_SLOVENIA           = 705, /* Slovenia */
+        CTRY_SOUTH_AFRICA       = 710, /* South Africa */
+        CTRY_SPAIN              = 724, /* Spain */
+        CTRY_SRI_LANKA          = 728, /* Sri Lanka */
+        CTRY_SWEDEN             = 752, /* Sweden */
+        CTRY_SWITZERLAND        = 756, /* Switzerland */
+        CTRY_SYRIA              = 760, /* Syria */
+        CTRY_TAIWAN             = 158, /* Taiwan */
+        CTRY_THAILAND           = 764, /* Thailand */
+        CTRY_TRINIDAD_Y_TOBAGO  = 780, /* Trinidad y Tobago */
+        CTRY_TUNISIA            = 788, /* Tunisia */
+        CTRY_TURKEY             = 792, /* Turkey */
+        CTRY_UAE                = 784, /* U.A.E. */
+        CTRY_UKRAINE            = 804, /* Ukraine */
+        CTRY_UNITED_KINGDOM     = 826, /* United Kingdom */
+        CTRY_UNITED_STATES      = 840, /* United States */
+        CTRY_URUGUAY            = 858, /* Uruguay */
+        CTRY_UZBEKISTAN         = 860, /* Uzbekistan */
+        CTRY_VENEZUELA          = 862, /* Venezuela */
+        CTRY_VIET_NAM           = 704, /* Viet Nam */
+        CTRY_YEMEN              = 887, /* Yemen */
+        CTRY_ZIMBABWE           = 716, /* Zimbabwe */
+};
+
+#define IEEE80211_CHANNELS_2GHZ_MIN     2412    /* 2GHz channel 1 */
+#define IEEE80211_CHANNELS_2GHZ_MAX     2732    /* 2GHz channel 26 */
+#define IEEE80211_CHANNELS_5GHZ_MIN     5005    /* 5GHz channel 1 */
+#define IEEE80211_CHANNELS_5GHZ_MAX     6100    /* 5GHz channel 220 */
+
+struct ath5k_regchannel {
+        u16 chan;
+        enum ath5k_regdom domain;
+        u32 mode;
+};
+
+#define IEEE80211_CHANNELS_2GHZ {                                       \
+/*2412*/ {   1, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2417*/ {   2, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2422*/ {   3, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2427*/ {   4, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2432*/ {   5, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2437*/ {   6, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2442*/ {   7, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2447*/ {   8, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2452*/ {   9, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2457*/ {  10, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2462*/ {  11, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2467*/ {  12, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2472*/ {  13, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM },                   \
+                                                                        \
+/*2432*/ {   5, DMN_ETSIB, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2437*/ {   6, DMN_ETSIB, CHANNEL_CCK|CHANNEL_OFDM|CHANNEL_TURBO },    \
+/*2442*/ {   7, DMN_ETSIB, CHANNEL_CCK|CHANNEL_OFDM },                  \
+                                                                        \
+/*2412*/ {   1, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2417*/ {   2, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2422*/ {   3, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2427*/ {   4, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2432*/ {   5, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2437*/ {   6, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM|CHANNEL_TURBO },    \
+/*2442*/ {   7, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2447*/ {   8, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2452*/ {   9, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2457*/ {  10, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2462*/ {  11, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2467*/ {  12, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2472*/ {  13, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM },                  \
+                                                                        \
+/*2412*/ {   1, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2417*/ {   2, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2422*/ {   3, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2427*/ {   4, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2432*/ {   5, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2437*/ {   6, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM|CHANNEL_TURBO },     \
+/*2442*/ {   7, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2447*/ {   8, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2452*/ {   9, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2457*/ {  10, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2462*/ {  11, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+                                                                        \
+/*2412*/ {   1, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2417*/ {   2, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2422*/ {   3, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2427*/ {   4, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2432*/ {   5, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2437*/ {   6, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2442*/ {   7, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2447*/ {   8, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2452*/ {   9, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2457*/ {  10, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2462*/ {  11, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2467*/ {  12, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2472*/ {  13, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM },                   \
+/*2484*/ {  14, DMN_MKKA, CHANNEL_CCK },                                \
+                                                                        \
+/*2412*/ {   1, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2417*/ {   2, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2422*/ {   3, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2427*/ {   4, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2432*/ {   5, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2437*/ {   6, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM|CHANNEL_TURBO },    \
+/*2442*/ {   7, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2447*/ {   8, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2452*/ {   9, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2457*/ {  10, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2462*/ {  11, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2467*/ {  12, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM },                  \
+/*2472*/ {  13, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM },                  \
+}
+
+#define IEEE80211_CHANNELS_5GHZ {                       \
+/*5745*/ { 149, DMN_APL1, CHANNEL_OFDM },               \
+/*5765*/ { 153, DMN_APL1, CHANNEL_OFDM },               \
+/*5785*/ { 157, DMN_APL1, CHANNEL_OFDM },               \
+/*5805*/ { 161, DMN_APL1, CHANNEL_OFDM },               \
+/*5825*/ { 165, DMN_APL1, CHANNEL_OFDM },               \
+                                                        \
+/*5745*/ { 149, DMN_APL2, CHANNEL_OFDM },               \
+/*5765*/ { 153, DMN_APL2, CHANNEL_OFDM },               \
+/*5785*/ { 157, DMN_APL2, CHANNEL_OFDM },               \
+/*5805*/ { 161, DMN_APL2, CHANNEL_OFDM },               \
+                                                        \
+/*5280*/ {  56, DMN_APL3, CHANNEL_OFDM },               \
+/*5300*/ {  60, DMN_APL3, CHANNEL_OFDM },               \
+/*5320*/ {  64, DMN_APL3, CHANNEL_OFDM },               \
+/*5745*/ { 149, DMN_APL3, CHANNEL_OFDM },               \
+/*5765*/ { 153, DMN_APL3, CHANNEL_OFDM },               \
+/*5785*/ { 157, DMN_APL3, CHANNEL_OFDM },               \
+/*5805*/ { 161, DMN_APL3, CHANNEL_OFDM },               \
+                                                        \
+/*5180*/ {  36, DMN_APL4, CHANNEL_OFDM },               \
+/*5200*/ {  40, DMN_APL4, CHANNEL_OFDM },               \
+/*5220*/ {  44, DMN_APL4, CHANNEL_OFDM },               \
+/*5240*/ {  48, DMN_APL4, CHANNEL_OFDM },               \
+/*5745*/ { 149, DMN_APL4, CHANNEL_OFDM },               \
+/*5765*/ { 153, DMN_APL4, CHANNEL_OFDM },               \
+/*5785*/ { 157, DMN_APL4, CHANNEL_OFDM },               \
+/*5805*/ { 161, DMN_APL4, CHANNEL_OFDM },               \
+/*5825*/ { 165, DMN_APL4, CHANNEL_OFDM },               \
+                                                        \
+/*5745*/ { 149, DMN_APL5, CHANNEL_OFDM },               \
+/*5765*/ { 153, DMN_APL5, CHANNEL_OFDM },               \
+/*5785*/ { 157, DMN_APL5, CHANNEL_OFDM },               \
+/*5805*/ { 161, DMN_APL5, CHANNEL_OFDM },               \
+/*5825*/ { 165, DMN_APL5, CHANNEL_OFDM },               \
+                                                        \
+/*5180*/ {  36, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5200*/ {  40, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5220*/ {  44, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5240*/ {  48, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5260*/ {  52, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5280*/ {  56, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5300*/ {  60, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5320*/ {  64, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5500*/ { 100, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5520*/ { 104, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5540*/ { 108, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5560*/ { 112, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5580*/ { 116, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5600*/ { 120, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5620*/ { 124, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5640*/ { 128, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5660*/ { 132, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5680*/ { 136, DMN_ETSI1, CHANNEL_OFDM },              \
+/*5700*/ { 140, DMN_ETSI1, CHANNEL_OFDM },              \
+                                                        \
+/*5180*/ {  36, DMN_ETSI2, CHANNEL_OFDM },              \
+/*5200*/ {  40, DMN_ETSI2, CHANNEL_OFDM },              \
+/*5220*/ {  44, DMN_ETSI2, CHANNEL_OFDM },              \
+/*5240*/ {  48, DMN_ETSI2, CHANNEL_OFDM },              \
+                                                        \
+/*5180*/ {  36, DMN_ETSI3, CHANNEL_OFDM },              \
+/*5200*/ {  40, DMN_ETSI3, CHANNEL_OFDM },              \
+/*5220*/ {  44, DMN_ETSI3, CHANNEL_OFDM },              \
+/*5240*/ {  48, DMN_ETSI3, CHANNEL_OFDM },              \
+/*5260*/ {  52, DMN_ETSI3, CHANNEL_OFDM },              \
+/*5280*/ {  56, DMN_ETSI3, CHANNEL_OFDM },              \
+/*5300*/ {  60, DMN_ETSI3, CHANNEL_OFDM },              \
+/*5320*/ {  64, DMN_ETSI3, CHANNEL_OFDM },              \
+                                                        \
+/*5180*/ {  36, DMN_ETSI4, CHANNEL_OFDM },              \
+/*5200*/ {  40, DMN_ETSI4, CHANNEL_OFDM },              \
+/*5220*/ {  44, DMN_ETSI4, CHANNEL_OFDM },              \
+/*5240*/ {  48, DMN_ETSI4, CHANNEL_OFDM },              \
+/*5260*/ {  52, DMN_ETSI4, CHANNEL_OFDM },              \
+/*5280*/ {  56, DMN_ETSI4, CHANNEL_OFDM },              \
+/*5300*/ {  60, DMN_ETSI4, CHANNEL_OFDM },              \
+/*5320*/ {  64, DMN_ETSI4, CHANNEL_OFDM },              \
+                                                        \
+/*5180*/ {  36, DMN_ETSI5, CHANNEL_OFDM },              \
+/*5200*/ {  40, DMN_ETSI5, CHANNEL_OFDM },              \
+/*5220*/ {  44, DMN_ETSI5, CHANNEL_OFDM },              \
+/*5240*/ {  48, DMN_ETSI5, CHANNEL_OFDM },              \
+                                                        \
+/*5180*/ {  36, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5200*/ {  40, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5220*/ {  44, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5240*/ {  48, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5260*/ {  52, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5280*/ {  56, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5500*/ { 100, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5520*/ { 104, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5540*/ { 108, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5560*/ { 112, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5580*/ { 116, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5600*/ { 120, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5620*/ { 124, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5640*/ { 128, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5660*/ { 132, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5680*/ { 136, DMN_ETSI6, CHANNEL_OFDM },              \
+/*5700*/ { 140, DMN_ETSI6, CHANNEL_OFDM },              \
+                                                        \
+/*5180*/ {  36, DMN_FCC1, CHANNEL_OFDM },               \
+/*5200*/ {  40, DMN_FCC1, CHANNEL_OFDM },               \
+/*5210*/ {  42, DMN_FCC1, CHANNEL_OFDM|CHANNEL_TURBO }, \
+/*5220*/ {  44, DMN_FCC1, CHANNEL_OFDM },               \
+/*5240*/ {  48, DMN_FCC1, CHANNEL_OFDM },               \
+/*5250*/ {  50, DMN_FCC1, CHANNEL_OFDM|CHANNEL_TURBO }, \
+/*5260*/ {  52, DMN_FCC1, CHANNEL_OFDM },               \
+/*5280*/ {  56, DMN_FCC1, CHANNEL_OFDM },               \
+/*5290*/ {  58, DMN_FCC1, CHANNEL_OFDM|CHANNEL_TURBO }, \
+/*5300*/ {  60, DMN_FCC1, CHANNEL_OFDM },               \
+/*5320*/ {  64, DMN_FCC1, CHANNEL_OFDM },               \
+/*5745*/ { 149, DMN_FCC1, CHANNEL_OFDM },               \
+/*5760*/ { 152, DMN_FCC1, CHANNEL_OFDM|CHANNEL_TURBO }, \
+/*5765*/ { 153, DMN_FCC1, CHANNEL_OFDM },               \
+/*5785*/ { 157, DMN_FCC1, CHANNEL_OFDM },               \
+/*5800*/ { 160, DMN_FCC1, CHANNEL_OFDM|CHANNEL_TURBO }, \
+/*5805*/ { 161, DMN_FCC1, CHANNEL_OFDM },               \
+/*5825*/ { 165, DMN_FCC1, CHANNEL_OFDM },               \
+                                                        \
+/*5180*/ {  36, DMN_FCC2, CHANNEL_OFDM },               \
+/*5200*/ {  40, DMN_FCC2, CHANNEL_OFDM },               \
+/*5220*/ {  44, DMN_FCC2, CHANNEL_OFDM },               \
+/*5240*/ {  48, DMN_FCC2, CHANNEL_OFDM },               \
+/*5260*/ {  52, DMN_FCC2, CHANNEL_OFDM },               \
+/*5280*/ {  56, DMN_FCC2, CHANNEL_OFDM },               \
+/*5300*/ {  60, DMN_FCC2, CHANNEL_OFDM },               \
+/*5320*/ {  64, DMN_FCC2, CHANNEL_OFDM },               \
+/*5745*/ { 149, DMN_FCC2, CHANNEL_OFDM },               \
+/*5765*/ { 153, DMN_FCC2, CHANNEL_OFDM },               \
+/*5785*/ { 157, DMN_FCC2, CHANNEL_OFDM },               \
+/*5805*/ { 161, DMN_FCC2, CHANNEL_OFDM },               \
+/*5825*/ { 165, DMN_FCC2, CHANNEL_OFDM },               \
+                                                        \
+/*5180*/ {  36, DMN_FCC3, CHANNEL_OFDM },               \
+/*5200*/ {  40, DMN_FCC3, CHANNEL_OFDM },               \
+/*5210*/ {  42, DMN_FCC3, CHANNEL_OFDM|CHANNEL_TURBO }, \
+/*5220*/ {  44, DMN_FCC3, CHANNEL_OFDM },               \
+/*5240*/ {  48, DMN_FCC3, CHANNEL_OFDM },               \
+/*5250*/ {  50, DMN_FCC3, CHANNEL_OFDM|CHANNEL_TURBO }, \
+/*5260*/ {  52, DMN_FCC3, CHANNEL_OFDM },               \
+/*5280*/ {  56, DMN_FCC3, CHANNEL_OFDM },               \
+/*5290*/ {  58, DMN_FCC3, CHANNEL_OFDM|CHANNEL_TURBO }, \
+/*5300*/ {  60, DMN_FCC3, CHANNEL_OFDM },               \
+/*5320*/ {  64, DMN_FCC3, CHANNEL_OFDM },               \
+/*5500*/ { 100, DMN_FCC3, CHANNEL_OFDM },               \
+/*5520*/ { 104, DMN_FCC3, CHANNEL_OFDM },               \
+/*5540*/ { 108, DMN_FCC3, CHANNEL_OFDM },               \
+/*5560*/ { 112, DMN_FCC3, CHANNEL_OFDM },               \
+/*5580*/ { 116, DMN_FCC3, CHANNEL_OFDM },               \
+/*5600*/ { 120, DMN_FCC3, CHANNEL_OFDM },               \
+/*5620*/ { 124, DMN_FCC3, CHANNEL_OFDM },               \
+/*5640*/ { 128, DMN_FCC3, CHANNEL_OFDM },               \
+/*5660*/ { 132, DMN_FCC3, CHANNEL_OFDM },               \
+/*5680*/ { 136, DMN_FCC3, CHANNEL_OFDM },               \
+/*5700*/ { 140, DMN_FCC3, CHANNEL_OFDM },               \
+/*5745*/ { 149, DMN_FCC3, CHANNEL_OFDM },               \
+/*5760*/ { 152, DMN_FCC3, CHANNEL_OFDM|CHANNEL_TURBO }, \
+/*5765*/ { 153, DMN_FCC3, CHANNEL_OFDM },               \
+/*5785*/ { 157, DMN_FCC3, CHANNEL_OFDM },               \
+/*5800*/ { 160, DMN_FCC3, CHANNEL_OFDM|CHANNEL_TURBO }, \
+/*5805*/ { 161, DMN_FCC3, CHANNEL_OFDM },               \
+/*5825*/ { 165, DMN_FCC3, CHANNEL_OFDM },               \
+                                                        \
+/*5170*/ {  34, DMN_MKK1, CHANNEL_OFDM },               \
+/*5190*/ {  38, DMN_MKK1, CHANNEL_OFDM },               \
+/*5210*/ {  42, DMN_MKK1, CHANNEL_OFDM },               \
+/*5230*/ {  46, DMN_MKK1, CHANNEL_OFDM },               \
+                                                        \
+/*5040*/ {   8, DMN_MKK2, CHANNEL_OFDM },               \
+/*5060*/ {  12, DMN_MKK2, CHANNEL_OFDM },               \
+/*5080*/ {  16, DMN_MKK2, CHANNEL_OFDM },               \
+/*5170*/ {  34, DMN_MKK2, CHANNEL_OFDM },               \
+/*5190*/ {  38, DMN_MKK2, CHANNEL_OFDM },               \
+/*5210*/ {  42, DMN_MKK2, CHANNEL_OFDM },               \
+/*5230*/ {  46, DMN_MKK2, CHANNEL_OFDM },               \
+                                                        \
+/*5180*/ {  36, DMN_WORLD, CHANNEL_OFDM },              \
+/*5200*/ {  40, DMN_WORLD, CHANNEL_OFDM },              \
+/*5220*/ {  44, DMN_WORLD, CHANNEL_OFDM },              \
+/*5240*/ {  48, DMN_WORLD, CHANNEL_OFDM },              \
+}
+
+enum ath5k_regdom ath5k_regdom2flag(enum ath5k_regdom, u16);
+u16 ath5k_regdom_from_ieee(enum ath5k_regdom ieee);
+enum ath5k_regdom ath5k_regdom_to_ieee(u16 regdomain);
+
+#endif