1 files changed, 27 insertions, 47 deletions

diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 891bdab49887..7b9621de239f 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -67,23 +67,7 @@
 /* For rough constant delay */
 #define WL3501_NOPLOOP(n) { int x = 0; while (x++ < n) slow_down_io(); }
 
-/*
- * All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If you do not
- * define PCMCIA_DEBUG at all, all the debug code will be left out.  If you
- * compile with PCMCIA_DEBUG=0, the debug code will be present but disabled --
- * but it can then be enabled for specific modules at load time with a
- * 'pc_debug=#' option to insmod.
- */
-#define PCMCIA_DEBUG 0
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define dprintk(n, format, args...) \
-        { if (pc_debug > (n)) \
-                printk(KERN_INFO "%s: " format "\n", __func__ , ##args); }
-#else
-#define dprintk(n, format, args...)
-#endif
+
 
 #define wl3501_outb(a, b) { outb(a, b); slow_down_io(); }
 #define wl3501_outb_p(a, b) { outb_p(a, b); slow_down_io(); }
@@ -684,10 +668,10 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
         int matchflag = 0;
         struct wl3501_scan_confirm sig;
 
-        dprintk(3, "entry");
+        pr_debug("entry");
         wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
         if (sig.status == WL3501_STATUS_SUCCESS) {
-                dprintk(3, "success");
+                pr_debug("success");
                 if ((this->net_type == IW_MODE_INFRA &&
                      (sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
                     (this->net_type == IW_MODE_ADHOC &&
@@ -722,7 +706,7 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
                         }
                 }
         } else if (sig.status == WL3501_STATUS_TIMEOUT) {
-                dprintk(3, "timeout");
+                pr_debug("timeout");
                 this->join_sta_bss = 0;
                 for (i = this->join_sta_bss; i < this->bss_cnt; i++)
                         if (!wl3501_mgmt_join(this, i))
@@ -879,7 +863,7 @@ static int wl3501_mgmt_auth(struct wl3501_card *this)
                 .timeout = 1000,
         };
 
-        dprintk(3, "entry");
+        pr_debug("entry");
         memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
         return wl3501_esbq_exec(this, &sig, sizeof(sig));
 }
@@ -893,7 +877,7 @@ static int wl3501_mgmt_association(struct wl3501_card *this)
                 .cap_info        = this->cap_info,
         };
 
-        dprintk(3, "entry");
+        pr_debug("entry");
         memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
         return wl3501_esbq_exec(this, &sig, sizeof(sig));
 }
@@ -903,7 +887,7 @@ static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr)
         struct wl3501_card *this = netdev_priv(dev);
         struct wl3501_join_confirm sig;
 
-        dprintk(3, "entry");
+        pr_debug("entry");
         wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
         if (sig.status == WL3501_STATUS_SUCCESS) {
                 if (this->net_type == IW_MODE_INFRA) {
@@ -962,7 +946,7 @@ static inline void wl3501_md_confirm_interrupt(struct net_device *dev,
 {
         struct wl3501_md_confirm sig;
 
-        dprintk(3, "entry");
+        pr_debug("entry");
         wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
         wl3501_free_tx_buffer(this, sig.data);
         if (netif_queue_stopped(dev))
@@ -1017,7 +1001,7 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev,
 static inline void wl3501_get_confirm_interrupt(struct wl3501_card *this,
                                                 u16 addr, void *sig, int size)
 {
-        dprintk(3, "entry");
+        pr_debug("entry");
         wl3501_get_from_wla(this, addr, &this->sig_get_confirm,
                             sizeof(this->sig_get_confirm));
         wake_up(&this->wait);
@@ -1029,7 +1013,7 @@ static inline void wl3501_start_confirm_interrupt(struct net_device *dev,
 {
         struct wl3501_start_confirm sig;
 
-        dprintk(3, "entry");
+        pr_debug("entry");
         wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
         if (sig.status == WL3501_STATUS_SUCCESS)
                 netif_wake_queue(dev);
@@ -1041,7 +1025,7 @@ static inline void wl3501_assoc_confirm_interrupt(struct net_device *dev,
         struct wl3501_card *this = netdev_priv(dev);
         struct wl3501_assoc_confirm sig;
 
-        dprintk(3, "entry");
+        pr_debug("entry");
         wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
 
         if (sig.status == WL3501_STATUS_SUCCESS)
@@ -1053,7 +1037,7 @@ static inline void wl3501_auth_confirm_interrupt(struct wl3501_card *this,
 {
         struct wl3501_auth_confirm sig;
 
-        dprintk(3, "entry");
+        pr_debug("entry");
         wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
 
         if (sig.status == WL3501_STATUS_SUCCESS)
@@ -1069,7 +1053,7 @@ static inline void wl3501_rx_interrupt(struct net_device *dev)
         u8 sig_id;
         struct wl3501_card *this = netdev_priv(dev);
 
-        dprintk(3, "entry");
+        pr_debug("entry");
 loop:
         morepkts = 0;
         if (!wl3501_esbq_confirm(this))
@@ -1302,7 +1286,7 @@ static int wl3501_reset(struct net_device *dev)
         wl3501_ack_interrupt(this);
         wl3501_unblock_interrupt(this);
         wl3501_mgmt_scan(this, 100);
-        dprintk(1, "%s: device reset", dev->name);
+        pr_debug("%s: device reset", dev->name);
         rc = 0;
 out:
         return rc;
@@ -1376,7 +1360,7 @@ static int wl3501_open(struct net_device *dev)
         link->open++;
 
         /* Initial WL3501 firmware */
-        dprintk(1, "%s: Initialize WL3501 firmware...", dev->name);
+        pr_debug("%s: Initialize WL3501 firmware...", dev->name);
         if (wl3501_init_firmware(this))
                 goto fail;
         /* Initial device variables */
@@ -1388,7 +1372,7 @@ static int wl3501_open(struct net_device *dev)
         wl3501_unblock_interrupt(this);
         wl3501_mgmt_scan(this, 100);
         rc = 0;
-        dprintk(1, "%s: WL3501 opened", dev->name);
+        pr_debug("%s: WL3501 opened", dev->name);
         printk(KERN_INFO "%s: Card Name: %s\n"
                          "%s: Firmware Date: %s\n",
                          dev->name, this->card_name,
@@ -1914,8 +1898,7 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
         p_dev->io.IOAddrLines   = 5;
 
         /* Interrupt setup */
-        p_dev->irq.Attributes   = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-        p_dev->irq.IRQInfo1     = IRQ_LEVEL_ID;
+        p_dev->irq.Attributes   = IRQ_TYPE_DYNAMIC_SHARING;
         p_dev->irq.Handler = wl3501_interrupt;
 
         /* General socket configuration */
@@ -1938,16 +1921,13 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
         dev->wireless_handlers  = &wl3501_handler_def;
         SET_ETHTOOL_OPS(dev, &ops);
         netif_stop_queue(dev);
-        p_dev->priv = p_dev->irq.Instance = dev;
+        p_dev->priv = dev;
 
         return wl3501_config(p_dev);
 out_link:
         return -ENOMEM;
 }
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 /**
  * wl3501_config - configure the PCMCIA socket and make eth device available
  * @link - FILL_IN
@@ -1959,7 +1939,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 static int wl3501_config(struct pcmcia_device *link)
 {
         struct net_device *dev = link->priv;
-        int i = 0, j, last_fn, last_ret;
+        int i = 0, j, ret;
         struct wl3501_card *this;
 
         /* Try allocating IO ports.  This tries a few fixed addresses.  If you
@@ -1975,24 +1955,26 @@ static int wl3501_config(struct pcmcia_device *link)
                 if (i == 0)
                         break;
         }
-        if (i != 0) {
-                cs_error(link, RequestIO, i);
+        if (i != 0)
                 goto failed;
-        }
 
         /* Now allocate an interrupt line. Note that this does not actually
          * assign a handler to the interrupt. */
 
-        CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+        ret = pcmcia_request_irq(link, &link->irq);
+        if (ret)
+                goto failed;
 
         /* This actually configures the PCMCIA socket -- setting up the I/O
          * windows and the interrupt mapping.  */
 
-        CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+        ret = pcmcia_request_configuration(link, &link->conf);
+        if (ret)
+                goto failed;
 
         dev->irq = link->irq.AssignedIRQ;
         dev->base_addr = link->io.BasePort1;
-        SET_NETDEV_DEV(dev, &handle_to_dev(link));
+        SET_NETDEV_DEV(dev, &link->dev);
         if (register_netdev(dev)) {
                 printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n");
                 goto failed;
@@ -2041,8 +2023,6 @@ static int wl3501_config(struct pcmcia_device *link)
         netif_start_queue(dev);
         return 0;
 
-cs_failed:
-        cs_error(link, last_fn, last_ret);
 failed:
         wl3501_release(link);
         return -ENODEV;