1 files changed, 80 insertions, 79 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 6aeb82b6992f..818367b57bab 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1463,59 +1463,66 @@ static void iwl_nic_start(struct iwl_priv *priv)
 }
 
 
+static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
+static int iwl_mac_setup_register(struct iwl_priv *priv);
+
+static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
+{
+        const char *name_pre = priv->cfg->fw_name_pre;
+
+        if (first)
+                priv->fw_index = priv->cfg->ucode_api_max;
+        else
+                priv->fw_index--;
+
+        if (priv->fw_index < priv->cfg->ucode_api_min) {
+                IWL_ERR(priv, "no suitable firmware found!\n");
+                return -ENOENT;
+        }
+
+        sprintf(priv->firmware_name, "%s%d%s",
+                name_pre, priv->fw_index, ".ucode");
+
+        IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n",
+                       priv->firmware_name);
+
+        return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
+                                       &priv->pci_dev->dev, GFP_KERNEL, priv,
+                                       iwl_ucode_callback);
+}
+
 /**
- * iwl_read_ucode - Read uCode images from disk file.
+ * iwl_ucode_callback - callback when firmware was loaded
  *
- * Copy into buffers for card to fetch via bus-mastering
+ * If loaded successfully, copies the firmware into buffers
+ * for the card to fetch (via DMA).
  */
-static int iwl_read_ucode(struct iwl_priv *priv)
+static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
 {
+        struct iwl_priv *priv = context;
         struct iwl_ucode_header *ucode;
-        int ret = -EINVAL, index;
-        const struct firmware *ucode_raw;
-        const char *name_pre = priv->cfg->fw_name_pre;
         const unsigned int api_max = priv->cfg->ucode_api_max;
         const unsigned int api_min = priv->cfg->ucode_api_min;
-        char buf[25];
         u8 *src;
         size_t len;
         u32 api_ver, build;
         u32 inst_size, data_size, init_size, init_data_size, boot_size;
+        int err;
         u16 eeprom_ver;
 
-        /* Ask kernel firmware_class module to get the boot firmware off disk.
-         * request_firmware() is synchronous, file is in memory on return. */
-        for (index = api_max; index >= api_min; index--) {
-                sprintf(buf, "%s%d%s", name_pre, index, ".ucode");
-                ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev);
-                if (ret < 0) {
-                        IWL_ERR(priv, "%s firmware file req failed: %d\n",
-                                  buf, ret);
-                        if (ret == -ENOENT)
-                                continue;
-                        else
-                                goto error;
-                } else {
-                        if (index < api_max)
-                                IWL_ERR(priv, "Loaded firmware %s, "
-                                        "which is deprecated. "
-                                        "Please use API v%u instead.\n",
-                                          buf, api_max);
-
-                        IWL_DEBUG_INFO(priv, "Got firmware '%s' file (%zd bytes) from disk\n",
-                                       buf, ucode_raw->size);
-                        break;
-                }
+        if (!ucode_raw) {
+                IWL_ERR(priv, "request for firmware file '%s' failed.\n",
+                        priv->firmware_name);
+                goto try_again;
         }
 
-        if (ret < 0)
-                goto error;
+        IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
+                       priv->firmware_name, ucode_raw->size);
 
         /* Make sure that we got at least the v1 header! */
         if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
                 IWL_ERR(priv, "File size way too small!\n");
-                ret = -EINVAL;
-                goto err_release;
+                goto try_again;
         }
 
         /* Data from ucode file:  header followed by uCode images */
@@ -1540,10 +1547,9 @@ static int iwl_read_ucode(struct iwl_priv *priv)
                 IWL_ERR(priv, "Driver unable to support your firmware API. "
                           "Driver supports v%u, firmware is v%u.\n",
                           api_max, api_ver);
-                priv->ucode_ver = 0;
-                ret = -EINVAL;
-                goto err_release;
+                goto try_again;
         }
+
         if (api_ver != api_max)
                 IWL_ERR(priv, "Firmware has old API version. Expected v%u, "
                           "got v%u. New firmware can be obtained "
@@ -1585,6 +1591,12 @@ static int iwl_read_ucode(struct iwl_priv *priv)
         IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
                        boot_size);
 
+        /*
+         * For any of the failures below (before allocating pci memory)
+         * we will try to load a version with a smaller API -- maybe the
+         * user just got a corrupted version of the latest API.
+         */
+
         /* Verify size of file vs. image size info in file's header */
         if (ucode_raw->size !=
                 priv->cfg->ops->ucode->get_header_size(api_ver) +
@@ -1594,41 +1606,35 @@ static int iwl_read_ucode(struct iwl_priv *priv)
                 IWL_DEBUG_INFO(priv,
                         "uCode file size %d does not match expected size\n",
                         (int)ucode_raw->size);
-                ret = -EINVAL;
-                goto err_release;
+                goto try_again;
         }
 
         /* Verify that uCode images will fit in card's SRAM */
         if (inst_size > priv->hw_params.max_inst_size) {
                 IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
                                inst_size);
-                ret = -EINVAL;
-                goto err_release;
+                goto try_again;
         }
 
         if (data_size > priv->hw_params.max_data_size) {
                 IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
                                 data_size);
-                ret = -EINVAL;
-                goto err_release;
+                goto try_again;
         }
         if (init_size > priv->hw_params.max_inst_size) {
                 IWL_INFO(priv, "uCode init instr len %d too large to fit in\n",
                         init_size);
-                ret = -EINVAL;
-                goto err_release;
+                goto try_again;
         }
         if (init_data_size > priv->hw_params.max_data_size) {
                 IWL_INFO(priv, "uCode init data len %d too large to fit in\n",
                       init_data_size);
-                ret = -EINVAL;
-                goto err_release;
+                goto try_again;
         }
         if (boot_size > priv->hw_params.max_bsm_size) {
                 IWL_INFO(priv, "uCode boot instr len %d too large to fit in\n",
                         boot_size);
-                ret = -EINVAL;
-                goto err_release;
+                goto try_again;
         }
 
         /* Allocate ucode buffers for card's bus-master loading ... */
@@ -1712,20 +1718,36 @@ static int iwl_read_ucode(struct iwl_priv *priv)
         IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
         memcpy(priv->ucode_boot.v_addr, src, len);
 
+        /**************************************************
+         * This is still part of probe() in a sense...
+         *
+         * 9. Setup and register with mac80211 and debugfs
+         **************************************************/
+        err = iwl_mac_setup_register(priv);
+        if (err)
+                goto out_unbind;
+
+        err = iwl_dbgfs_register(priv, DRV_NAME);
+        if (err)
+                IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
+
         /* We have our copies now, allow OS release its copies */
         release_firmware(ucode_raw);
-        return 0;
+        return;
+
+ try_again:
+        /* try next, if any */
+        if (iwl_request_firmware(priv, false))
+                goto out_unbind;
+        release_firmware(ucode_raw);
+        return;
 
  err_pci_alloc:
         IWL_ERR(priv, "failed to allocate pci memory\n");
-        ret = -ENOMEM;
         iwl_dealloc_ucode_pci(priv);
-
- err_release:
+ out_unbind:
+        device_release_driver(&priv->pci_dev->dev);
         release_firmware(ucode_raw);
-
- error:
-        return ret;
 }
 
 static const char *desc_lookup_text[] = {
@@ -2631,7 +2653,7 @@ static int iwl_mac_setup_register(struct iwl_priv *priv)
          */
         hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
-        hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX + 1;
+        hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
         /* we create the 802.11 header and a zero-length SSID element */
         hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
 
@@ -2667,21 +2689,7 @@ static int iwl_mac_start(struct ieee80211_hw *hw)
 
         /* we should be verifying the device is ready to be opened */
         mutex_lock(&priv->mutex);
-
-        /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
-         * ucode filename and max sizes are card-specific. */
-
-        if (!priv->ucode_code.len) {
-                ret = iwl_read_ucode(priv);
-                if (ret) {
-                        IWL_ERR(priv, "Could not read microcode: %d\n", ret);
-                        mutex_unlock(&priv->mutex);
-                        return ret;
-                }
-        }
-
         ret = __iwl_up(priv);
-
         mutex_unlock(&priv->mutex);
 
         if (ret)
@@ -3654,17 +3662,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
         iwl_power_initialize(priv);
         iwl_tt_initialize(priv);
 
-        /**************************************************
-         * 9. Setup and register with mac80211 and debugfs
-         **************************************************/
-        err = iwl_mac_setup_register(priv);
+        err = iwl_request_firmware(priv, true);
         if (err)
                 goto out_remove_sysfs;
 
-        err = iwl_dbgfs_register(priv, DRV_NAME);
-        if (err)
-                IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
-
         return 0;
 
  out_remove_sysfs: