1 files changed, 422 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlegacy/iwl-csr.h b/drivers/net/wireless/iwlegacy/iwl-csr.h
new file mode 100644
index 000000000000..668a9616c269
--- /dev/null
+++ b/drivers/net/wireless/iwlegacy/iwl-csr.h
@@ -0,0 +1,422 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#ifndef __iwl_legacy_csr_h__
+#define __iwl_legacy_csr_h__
+/*
+ * CSR (control and status registers)
+ *
+ * CSR registers are mapped directly into PCI bus space, and are accessible
+ * whenever platform supplies power to device, even when device is in
+ * low power states due to driver-invoked device resets
+ * (e.g. CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes.
+ *
+ * Use iwl_write32() and iwl_read32() family to access these registers;
+ * these provide simple PCI bus access, without waking up the MAC.
+ * Do not use iwl_legacy_write_direct32() family for these registers;
+ * no need to "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ.
+ * The MAC (uCode processor, etc.) does not need to be powered up for accessing
+ * the CSR registers.
+ *
+ * NOTE:  Device does need to be awake in order to read this memory
+ *        via CSR_EEPROM register
+ */
+#define CSR_BASE    (0x000)
+
+#define CSR_HW_IF_CONFIG_REG    (CSR_BASE+0x000) /* hardware interface config */
+#define CSR_INT_COALESCING      (CSR_BASE+0x004) /* accum ints, 32-usec units */
+#define CSR_INT                 (CSR_BASE+0x008) /* host interrupt status/ack */
+#define CSR_INT_MASK            (CSR_BASE+0x00c) /* host interrupt enable */
+#define CSR_FH_INT_STATUS       (CSR_BASE+0x010) /* busmaster int status/ack*/
+#define CSR_GPIO_IN             (CSR_BASE+0x018) /* read external chip pins */
+#define CSR_RESET               (CSR_BASE+0x020) /* busmaster enable, NMI, etc*/
+#define CSR_GP_CNTRL            (CSR_BASE+0x024)
+
+/* 2nd byte of CSR_INT_COALESCING, not accessible via iwl_write32()! */
+#define CSR_INT_PERIODIC_REG    (CSR_BASE+0x005)
+
+/*
+ * Hardware revision info
+ * Bit fields:
+ * 31-8:  Reserved
+ *  7-4:  Type of device:  see CSR_HW_REV_TYPE_xxx definitions
+ *  3-2:  Revision step:  0 = A, 1 = B, 2 = C, 3 = D
+ *  1-0:  "Dash" (-) value, as in A-1, etc.
+ *
+ * NOTE:  Revision step affects calculation of CCK txpower for 4965.
+ * NOTE:  See also CSR_HW_REV_WA_REG (work-around for bug in 4965).
+ */
+#define CSR_HW_REV              (CSR_BASE+0x028)
+
+/*
+ * EEPROM memory reads
+ *
+ * NOTE:  Device must be awake, initialized via apm_ops.init(),
+ *        in order to read.
+ */
+#define CSR_EEPROM_REG          (CSR_BASE+0x02c)
+#define CSR_EEPROM_GP           (CSR_BASE+0x030)
+
+#define CSR_GIO_REG             (CSR_BASE+0x03C)
+#define CSR_GP_UCODE_REG        (CSR_BASE+0x048)
+#define CSR_GP_DRIVER_REG       (CSR_BASE+0x050)
+
+/*
+ * UCODE-DRIVER GP (general purpose) mailbox registers.
+ * SET/CLR registers set/clear bit(s) if "1" is written.
+ */
+#define CSR_UCODE_DRV_GP1       (CSR_BASE+0x054)
+#define CSR_UCODE_DRV_GP1_SET   (CSR_BASE+0x058)
+#define CSR_UCODE_DRV_GP1_CLR   (CSR_BASE+0x05c)
+#define CSR_UCODE_DRV_GP2       (CSR_BASE+0x060)
+
+#define CSR_LED_REG             (CSR_BASE+0x094)
+#define CSR_DRAM_INT_TBL_REG    (CSR_BASE+0x0A0)
+
+/* GIO Chicken Bits (PCI Express bus link power management) */
+#define CSR_GIO_CHICKEN_BITS    (CSR_BASE+0x100)
+
+/* Analog phase-lock-loop configuration  */
+#define CSR_ANA_PLL_CFG         (CSR_BASE+0x20c)
+
+/*
+ * CSR Hardware Revision Workaround Register.  Indicates hardware rev;
+ * "step" determines CCK backoff for txpower calculation.  Used for 4965 only.
+ * See also CSR_HW_REV register.
+ * Bit fields:
+ *  3-2:  0 = A, 1 = B, 2 = C, 3 = D step
+ *  1-0:  "Dash" (-) value, as in C-1, etc.
+ */
+#define CSR_HW_REV_WA_REG               (CSR_BASE+0x22C)
+
+#define CSR_DBG_HPET_MEM_REG            (CSR_BASE+0x240)
+#define CSR_DBG_LINK_PWR_MGMT_REG       (CSR_BASE+0x250)
+
+/* Bits for CSR_HW_IF_CONFIG_REG */
+#define CSR49_HW_IF_CONFIG_REG_BIT_4965_R       (0x00000010)
+#define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER      (0x00000C00)
+#define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI         (0x00000100)
+#define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI       (0x00000200)
+
+#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB         (0x00000100)
+#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM         (0x00000200)
+#define CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC            (0x00000400)
+#define CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE         (0x00000800)
+#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A    (0x00000000)
+#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B    (0x00001000)
+
+#define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A   (0x00080000)
+#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000)
+#define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY      (0x00400000) /* PCI_OWN_SEM */
+#define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */
+#define CSR_HW_IF_CONFIG_REG_PREPARE              (0x08000000) /* WAKE_ME */
+
+#define CSR_INT_PERIODIC_DIS                    (0x00) /* disable periodic int*/
+#define CSR_INT_PERIODIC_ENA                    (0xFF) /* 255*32 usec ~ 8 msec*/
+
+/* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
+ * acknowledged (reset) by host writing "1" to flagged bits. */
+#define CSR_INT_BIT_FH_RX        (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */
+#define CSR_INT_BIT_HW_ERR       (1 << 29) /* DMA hardware error FH_INT[31] */
+#define CSR_INT_BIT_RX_PERIODIC  (1 << 28) /* Rx periodic */
+#define CSR_INT_BIT_FH_TX        (1 << 27) /* Tx DMA FH_INT[1:0] */
+#define CSR_INT_BIT_SCD          (1 << 26) /* TXQ pointer advanced */
+#define CSR_INT_BIT_SW_ERR       (1 << 25) /* uCode error */
+#define CSR_INT_BIT_RF_KILL      (1 << 7)  /* HW RFKILL switch GP_CNTRL[27] toggled */
+#define CSR_INT_BIT_CT_KILL      (1 << 6)  /* Critical temp (chip too hot) rfkill */
+#define CSR_INT_BIT_SW_RX        (1 << 3)  /* Rx, command responses, 3945 */
+#define CSR_INT_BIT_WAKEUP       (1 << 1)  /* NIC controller waking up (pwr mgmt) */
+#define CSR_INT_BIT_ALIVE        (1 << 0)  /* uCode interrupts once it initializes */
+
+#define CSR_INI_SET_MASK        (CSR_INT_BIT_FH_RX   | \
+                                 CSR_INT_BIT_HW_ERR  | \
+                                 CSR_INT_BIT_FH_TX   | \
+                                 CSR_INT_BIT_SW_ERR  | \
+                                 CSR_INT_BIT_RF_KILL | \
+                                 CSR_INT_BIT_SW_RX   | \
+                                 CSR_INT_BIT_WAKEUP  | \
+                                 CSR_INT_BIT_ALIVE)
+
+/* interrupt flags in FH (flow handler) (PCI busmaster DMA) */
+#define CSR_FH_INT_BIT_ERR       (1 << 31) /* Error */
+#define CSR_FH_INT_BIT_HI_PRIOR  (1 << 30) /* High priority Rx, bypass coalescing */
+#define CSR39_FH_INT_BIT_RX_CHNL2  (1 << 18) /* Rx channel 2 (3945 only) */
+#define CSR_FH_INT_BIT_RX_CHNL1  (1 << 17) /* Rx channel 1 */
+#define CSR_FH_INT_BIT_RX_CHNL0  (1 << 16) /* Rx channel 0 */
+#define CSR39_FH_INT_BIT_TX_CHNL6  (1 << 6)  /* Tx channel 6 (3945 only) */
+#define CSR_FH_INT_BIT_TX_CHNL1  (1 << 1)  /* Tx channel 1 */
+#define CSR_FH_INT_BIT_TX_CHNL0  (1 << 0)  /* Tx channel 0 */
+
+#define CSR39_FH_INT_RX_MASK    (CSR_FH_INT_BIT_HI_PRIOR | \
+                                 CSR39_FH_INT_BIT_RX_CHNL2 | \
+                                 CSR_FH_INT_BIT_RX_CHNL1 | \
+                                 CSR_FH_INT_BIT_RX_CHNL0)
+
+
+#define CSR39_FH_INT_TX_MASK    (CSR39_FH_INT_BIT_TX_CHNL6 | \
+                                 CSR_FH_INT_BIT_TX_CHNL1 | \
+                                 CSR_FH_INT_BIT_TX_CHNL0)
+
+#define CSR49_FH_INT_RX_MASK    (CSR_FH_INT_BIT_HI_PRIOR | \
+                                 CSR_FH_INT_BIT_RX_CHNL1 | \
+                                 CSR_FH_INT_BIT_RX_CHNL0)
+
+#define CSR49_FH_INT_TX_MASK    (CSR_FH_INT_BIT_TX_CHNL1 | \
+                                 CSR_FH_INT_BIT_TX_CHNL0)
+
+/* GPIO */
+#define CSR_GPIO_IN_BIT_AUX_POWER                   (0x00000200)
+#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC                (0x00000000)
+#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC               (0x00000200)
+
+/* RESET */
+#define CSR_RESET_REG_FLAG_NEVO_RESET                (0x00000001)
+#define CSR_RESET_REG_FLAG_FORCE_NMI                 (0x00000002)
+#define CSR_RESET_REG_FLAG_SW_RESET                  (0x00000080)
+#define CSR_RESET_REG_FLAG_MASTER_DISABLED           (0x00000100)
+#define CSR_RESET_REG_FLAG_STOP_MASTER               (0x00000200)
+#define CSR_RESET_LINK_PWR_MGMT_DISABLED             (0x80000000)
+
+/*
+ * GP (general purpose) CONTROL REGISTER
+ * Bit fields:
+ *    27:  HW_RF_KILL_SW
+ *         Indicates state of (platform's) hardware RF-Kill switch
+ * 26-24:  POWER_SAVE_TYPE
+ *         Indicates current power-saving mode:
+ *         000 -- No power saving
+ *         001 -- MAC power-down
+ *         010 -- PHY (radio) power-down
+ *         011 -- Error
+ *   9-6:  SYS_CONFIG
+ *         Indicates current system configuration, reflecting pins on chip
+ *         as forced high/low by device circuit board.
+ *     4:  GOING_TO_SLEEP
+ *         Indicates MAC is entering a power-saving sleep power-down.
+ *         Not a good time to access device-internal resources.
+ *     3:  MAC_ACCESS_REQ
+ *         Host sets this to request and maintain MAC wakeup, to allow host
+ *         access to device-internal resources.  Host must wait for
+ *         MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR
+ *         device registers.
+ *     2:  INIT_DONE
+ *         Host sets this to put device into fully operational D0 power mode.
+ *         Host resets this after SW_RESET to put device into low power mode.
+ *     0:  MAC_CLOCK_READY
+ *         Indicates MAC (ucode processor, etc.) is powered up and can run.
+ *         Internal resources are accessible.
+ *         NOTE:  This does not indicate that the processor is actually running.
+ *         NOTE:  This does not indicate that 4965 or 3945 has completed
+ *                init or post-power-down restore of internal SRAM memory.
+ *                Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
+ *                SRAM is restored and uCode is in normal operation mode.
+ *                Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
+ *                do not need to save/restore it.
+ *         NOTE:  After device reset, this bit remains "0" until host sets
+ *                INIT_DONE
+ */
+#define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY        (0x00000001)
+#define CSR_GP_CNTRL_REG_FLAG_INIT_DONE              (0x00000004)
+#define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ         (0x00000008)
+#define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP         (0x00000010)
+
+#define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN           (0x00000001)
+
+#define CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE         (0x07000000)
+#define CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE         (0x04000000)
+#define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW          (0x08000000)
+
+
+/* EEPROM REG */
+#define CSR_EEPROM_REG_READ_VALID_MSK   (0x00000001)
+#define CSR_EEPROM_REG_BIT_CMD          (0x00000002)
+#define CSR_EEPROM_REG_MSK_ADDR         (0x0000FFFC)
+#define CSR_EEPROM_REG_MSK_DATA         (0xFFFF0000)
+
+/* EEPROM GP */
+#define CSR_EEPROM_GP_VALID_MSK         (0x00000007) /* signature */
+#define CSR_EEPROM_GP_IF_OWNER_MSK      (0x00000180)
+#define CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K         (0x00000002)
+#define CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K         (0x00000004)
+
+/* GP REG */
+#define CSR_GP_REG_POWER_SAVE_STATUS_MSK            (0x03000000) /* bit 24/25 */
+#define CSR_GP_REG_NO_POWER_SAVE            (0x00000000)
+#define CSR_GP_REG_MAC_POWER_SAVE           (0x01000000)
+#define CSR_GP_REG_PHY_POWER_SAVE           (0x02000000)
+#define CSR_GP_REG_POWER_SAVE_ERROR         (0x03000000)
+
+
+/* CSR GIO */
+#define CSR_GIO_REG_VAL_L0S_ENABLED     (0x00000002)
+
+/*
+ * UCODE-DRIVER GP (general purpose) mailbox register 1
+ * Host driver and uCode write and/or read this register to communicate with
+ * each other.
+ * Bit fields:
+ *     4:  UCODE_DISABLE
+ *         Host sets this to request permanent halt of uCode, same as
+ *         sending CARD_STATE command with "halt" bit set.
+ *     3:  CT_KILL_EXIT
+ *         Host sets this to request exit from CT_KILL state, i.e. host thinks
+ *         device temperature is low enough to continue normal operation.
+ *     2:  CMD_BLOCKED
+ *         Host sets this during RF KILL power-down sequence (HW, SW, CT KILL)
+ *         to release uCode to clear all Tx and command queues, enter
+ *         unassociated mode, and power down.
+ *         NOTE:  Some devices also use HBUS_TARG_MBX_C register for this bit.
+ *     1:  SW_BIT_RFKILL
+ *         Host sets this when issuing CARD_STATE command to request
+ *         device sleep.
+ *     0:  MAC_SLEEP
+ *         uCode sets this when preparing a power-saving power-down.
+ *         uCode resets this when power-up is complete and SRAM is sane.
+ *         NOTE:  3945/4965 saves internal SRAM data to host when powering down,
+ *                and must restore this data after powering back up.
+ *                MAC_SLEEP is the best indication that restore is complete.
+ *                Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
+ *                do not need to save/restore it.
+ */
+#define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP             (0x00000001)
+#define CSR_UCODE_SW_BIT_RFKILL                     (0x00000002)
+#define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED           (0x00000004)
+#define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT      (0x00000008)
+
+/* GIO Chicken Bits (PCI Express bus link power management) */
+#define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX  (0x00800000)
+#define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER  (0x20000000)
+
+/* LED */
+#define CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF)
+#define CSR_LED_REG_TRUN_ON (0x78)
+#define CSR_LED_REG_TRUN_OFF (0x38)
+
+/* ANA_PLL */
+#define CSR39_ANA_PLL_CFG_VAL        (0x01000000)
+
+/* HPET MEM debug */
+#define CSR_DBG_HPET_MEM_REG_VAL        (0xFFFF0000)
+
+/* DRAM INT TABLE */
+#define CSR_DRAM_INT_TBL_ENABLE         (1 << 31)
+#define CSR_DRAM_INIT_TBL_WRAP_CHECK    (1 << 27)
+
+/*
+ * HBUS (Host-side Bus)
+ *
+ * HBUS registers are mapped directly into PCI bus space, but are used
+ * to indirectly access device's internal memory or registers that
+ * may be powered-down.
+ *
+ * Use iwl_legacy_write_direct32()/iwl_legacy_read_direct32() family
+ * for these registers;
+ * host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
+ * to make sure the MAC (uCode processor, etc.) is powered up for accessing
+ * internal resources.
+ *
+ * Do not use iwl_write32()/iwl_read32() family to access these registers;
+ * these provide only simple PCI bus access, without waking up the MAC.
+ */
+#define HBUS_BASE       (0x400)
+
+/*
+ * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM
+ * structures, error log, event log, verifying uCode load).
+ * First write to address register, then read from or write to data register
+ * to complete the job.  Once the address register is set up, accesses to
+ * data registers auto-increment the address by one dword.
+ * Bit usage for address registers (read or write):
+ *  0-31:  memory address within device
+ */
+#define HBUS_TARG_MEM_RADDR     (HBUS_BASE+0x00c)
+#define HBUS_TARG_MEM_WADDR     (HBUS_BASE+0x010)
+#define HBUS_TARG_MEM_WDAT      (HBUS_BASE+0x018)
+#define HBUS_TARG_MEM_RDAT      (HBUS_BASE+0x01c)
+
+/* Mailbox C, used as workaround alternative to CSR_UCODE_DRV_GP1 mailbox */
+#define HBUS_TARG_MBX_C         (HBUS_BASE+0x030)
+#define HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED         (0x00000004)
+
+/*
+ * Registers for accessing device's internal peripheral registers
+ * (e.g. SCD, BSM, etc.).  First write to address register,
+ * then read from or write to data register to complete the job.
+ * Bit usage for address registers (read or write):
+ *  0-15:  register address (offset) within device
+ * 24-25:  (# bytes - 1) to read or write (e.g. 3 for dword)
+ */
+#define HBUS_TARG_PRPH_WADDR    (HBUS_BASE+0x044)
+#define HBUS_TARG_PRPH_RADDR    (HBUS_BASE+0x048)
+#define HBUS_TARG_PRPH_WDAT     (HBUS_BASE+0x04c)
+#define HBUS_TARG_PRPH_RDAT     (HBUS_BASE+0x050)
+
+/*
+ * Per-Tx-queue write pointer (index, really!)
+ * Indicates index to next TFD that driver will fill (1 past latest filled).
+ * Bit usage:
+ *  0-7:  queue write index
+ * 11-8:  queue selector
+ */
+#define HBUS_TARG_WRPTR         (HBUS_BASE+0x060)
+
+#endif /* !__iwl_legacy_csr_h__ */