1 files changed, 224 insertions, 0 deletions

diff --git a/drivers/net/wireless/i82593.h b/drivers/net/wireless/i82593.h
new file mode 100644
index 000000000000..33acb8add4d6
--- /dev/null
+++ b/drivers/net/wireless/i82593.h
@@ -0,0 +1,224 @@
+/*
+ * Definitions for Intel 82593 CSMA/CD Core LAN Controller
+ * The definitions are taken from the 1992 users manual with Intel
+ * order number 297125-001.
+ *
+ * /usr/src/pc/RCS/i82593.h,v 1.1 1996/07/17 15:23:12 root Exp
+ *
+ * Copyright 1994, Anders Klemets <klemets@it.kth.se>
+ *
+ * This software may be freely distributed for noncommercial purposes
+ * as long as this notice is retained.
+ * 
+ * HISTORY
+ * i82593.h,v
+ * Revision 1.1  1996/07/17 15:23:12  root
+ * Initial revision
+ *
+ * Revision 1.3  1995/04/05  15:13:58  adj
+ * Initial alpha release
+ *
+ * Revision 1.2  1994/06/16  23:57:31  klemets
+ * Mirrored all the fields in the configuration block.
+ *
+ * Revision 1.1  1994/06/02  20:25:34  klemets
+ * Initial revision
+ *
+ *
+ */
+#ifndef _I82593_H
+#define _I82593_H
+
+/* Intel 82593 CSMA/CD Core LAN Controller */
+
+/* Port 0 Command Register definitions */
+
+/* Execution operations */
+#define OP0_NOP                 0       /* CHNL = 0 */
+#define OP0_SWIT_TO_PORT_1      0       /* CHNL = 1 */
+#define OP0_IA_SETUP            1
+#define OP0_CONFIGURE           2
+#define OP0_MC_SETUP            3
+#define OP0_TRANSMIT            4
+#define OP0_TDR                 5
+#define OP0_DUMP                6
+#define OP0_DIAGNOSE            7
+#define OP0_TRANSMIT_NO_CRC     9
+#define OP0_RETRANSMIT          12
+#define OP0_ABORT               13
+/* Reception operations */
+#define OP0_RCV_ENABLE          8
+#define OP0_RCV_DISABLE         10
+#define OP0_STOP_RCV            11
+/* Status pointer control operations */
+#define OP0_FIX_PTR             15      /* CHNL = 1 */
+#define OP0_RLS_PTR             15      /* CHNL = 0 */
+#define OP0_RESET               14
+
+#define CR0_CHNL                (1 << 4)        /* 0=Channel 0, 1=Channel 1 */
+#define CR0_STATUS_0            0x00
+#define CR0_STATUS_1            0x20
+#define CR0_STATUS_2            0x40
+#define CR0_STATUS_3            0x60
+#define CR0_INT_ACK             (1 << 7)        /* 0=No ack, 1=acknowledge */
+
+/* Port 0 Status Register definitions */
+
+#define SR0_NO_RESULT           0               /* dummy */
+#define SR0_EVENT_MASK          0x0f
+#define SR0_IA_SETUP_DONE       1
+#define SR0_CONFIGURE_DONE      2
+#define SR0_MC_SETUP_DONE       3
+#define SR0_TRANSMIT_DONE       4
+#define SR0_TDR_DONE            5
+#define SR0_DUMP_DONE           6
+#define SR0_DIAGNOSE_PASSED     7
+#define SR0_TRANSMIT_NO_CRC_DONE 9
+#define SR0_RETRANSMIT_DONE     12
+#define SR0_EXECUTION_ABORTED   13
+#define SR0_END_OF_FRAME        8
+#define SR0_RECEPTION_ABORTED   10
+#define SR0_DIAGNOSE_FAILED     15
+#define SR0_STOP_REG_HIT        11
+
+#define SR0_CHNL                (1 << 4)
+#define SR0_EXECUTION           (1 << 5)
+#define SR0_RECEPTION           (1 << 6)
+#define SR0_INTERRUPT           (1 << 7)
+#define SR0_BOTH_RX_TX          (SR0_EXECUTION | SR0_RECEPTION)
+
+#define SR3_EXEC_STATE_MASK     0x03
+#define SR3_EXEC_IDLE           0
+#define SR3_TX_ABORT_IN_PROGRESS 1
+#define SR3_EXEC_ACTIVE         2
+#define SR3_ABORT_IN_PROGRESS   3
+#define SR3_EXEC_CHNL           (1 << 2)
+#define SR3_STP_ON_NO_RSRC      (1 << 3)
+#define SR3_RCVING_NO_RSRC      (1 << 4)
+#define SR3_RCV_STATE_MASK      0x60
+#define SR3_RCV_IDLE            0x00
+#define SR3_RCV_READY           0x20
+#define SR3_RCV_ACTIVE          0x40
+#define SR3_RCV_STOP_IN_PROG    0x60
+#define SR3_RCV_CHNL            (1 << 7)
+
+/* Port 1 Command Register definitions */
+
+#define OP1_NOP                 0
+#define OP1_SWIT_TO_PORT_0      1
+#define OP1_INT_DISABLE         2
+#define OP1_INT_ENABLE          3
+#define OP1_SET_TS              5
+#define OP1_RST_TS              7
+#define OP1_POWER_DOWN          8
+#define OP1_RESET_RING_MNGMT    11
+#define OP1_RESET               14
+#define OP1_SEL_RST             15
+
+#define CR1_STATUS_4            0x00
+#define CR1_STATUS_5            0x20
+#define CR1_STATUS_6            0x40
+#define CR1_STOP_REG_UPDATE     (1 << 7)
+
+/* Receive frame status bits */
+
+#define RX_RCLD                 (1 << 0)
+#define RX_IA_MATCH             (1 << 1)
+#define RX_NO_AD_MATCH          (1 << 2)
+#define RX_NO_SFD               (1 << 3)
+#define RX_SRT_FRM              (1 << 7)
+#define RX_OVRRUN               (1 << 8)
+#define RX_ALG_ERR              (1 << 10)
+#define RX_CRC_ERR              (1 << 11)
+#define RX_LEN_ERR              (1 << 12)
+#define RX_RCV_OK               (1 << 13)
+#define RX_TYP_LEN              (1 << 15)
+
+/* Transmit status bits */
+
+#define TX_NCOL_MASK            0x0f
+#define TX_FRTL                 (1 << 4)
+#define TX_MAX_COL              (1 << 5)
+#define TX_HRT_BEAT             (1 << 6)
+#define TX_DEFER                (1 << 7)
+#define TX_UND_RUN              (1 << 8)
+#define TX_LOST_CTS             (1 << 9)
+#define TX_LOST_CRS             (1 << 10)
+#define TX_LTCOL                (1 << 11)
+#define TX_OK                   (1 << 13)
+#define TX_COLL                 (1 << 15)
+
+struct i82593_conf_block {
+  u_char fifo_limit : 4,
+         forgnesi   : 1,
+         fifo_32    : 1,
+         d6mod      : 1,
+         throttle_enb : 1;
+  u_char throttle   : 6,
+         cntrxint   : 1,
+         contin     : 1;
+  u_char addr_len   : 3,
+         acloc      : 1,
+         preamb_len : 2,
+         loopback   : 2;
+  u_char lin_prio   : 3,
+         tbofstop   : 1,
+         exp_prio   : 3,
+         bof_met    : 1;
+  u_char            : 4,
+         ifrm_spc   : 4;
+  u_char            : 5,
+         slottim_low : 3;
+  u_char slottim_hi : 3,
+                    : 1,
+         max_retr   : 4;
+  u_char prmisc     : 1,
+         bc_dis     : 1,
+                    : 1,
+         crs_1      : 1,
+         nocrc_ins  : 1,
+         crc_1632   : 1,
+                    : 1,
+         crs_cdt    : 1;
+  u_char cs_filter  : 3,
+         crs_src    : 1,
+         cd_filter  : 3,
+                    : 1;
+  u_char            : 2,
+         min_fr_len : 6;
+  u_char lng_typ    : 1,
+         lng_fld    : 1,
+         rxcrc_xf   : 1,
+         artx       : 1,
+         sarec      : 1,
+         tx_jabber  : 1,        /* why is this called max_len in the manual? */
+         hash_1     : 1,
+         lbpkpol    : 1;
+  u_char            : 6,
+         fdx        : 1,
+                    : 1;
+  u_char dummy_6    : 6,        /* supposed to be ones */
+         mult_ia    : 1,
+         dis_bof    : 1;
+  u_char dummy_1    : 1,        /* supposed to be one */
+         tx_ifs_retrig : 2,
+         mc_all     : 1,
+         rcv_mon    : 2,
+         frag_acpt  : 1,
+         tstrttrs   : 1;
+  u_char fretx      : 1,
+         runt_eop   : 1,
+         hw_sw_pin  : 1,
+         big_endn   : 1,
+         syncrqs    : 1,
+         sttlen     : 1,
+         tx_eop     : 1,
+         rx_eop     : 1;
+  u_char rbuf_size  : 5,
+         rcvstop    : 1,
+                    : 2;
+};
+
+#define I82593_MAX_MULTICAST_ADDRESSES  128     /* Hardware hashed filter */
+
+#endif /* _I82593_H */