1 files changed, 961 insertions, 0 deletions

diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h
new file mode 100644
index 000000000000..aca1601e5b4f
--- /dev/null
+++ b/drivers/net/wireless/bcm43xx/bcm43xx.h
@@ -0,0 +1,961 @@
+#ifndef BCM43xx_H_
+#define BCM43xx_H_
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/stringify.h>
+#include <linux/pci.h>
+#include <net/ieee80211.h>
+#include <net/ieee80211softmac.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+
+
+#include "bcm43xx_debugfs.h"
+#include "bcm43xx_leds.h"
+
+
+#define DRV_NAME                        __stringify(KBUILD_MODNAME)
+#define DRV_VERSION                     __stringify(BCM43xx_VERSION)
+#define BCM43xx_DRIVER_NAME             DRV_NAME " driver " DRV_VERSION
+#define PFX                             DRV_NAME ": "
+
+#define BCM43xx_SWITCH_CORE_MAX_RETRIES 10
+#define BCM43xx_IRQWAIT_MAX_RETRIES     50
+#define BCM43xx_TX_TIMEOUT              (10 * HZ)
+
+#define BCM43xx_IO_SIZE                 8192
+#define BCM43xx_REG_ACTIVE_CORE         0x80
+
+/* Interrupt Control PCI Configuration Register. (Only on PCI cores with rev >= 6) */
+#define BCM43xx_PCICFG_ICR              0x94
+/* SPROM control register. */
+#define BCM43xx_PCICFG_SPROMCTL         0x88
+
+/* MMIO offsets */
+#define BCM43xx_MMIO_DMA1_REASON        0x20
+#define BCM43xx_MMIO_DMA1_IRQ_MASK      0x24
+#define BCM43xx_MMIO_DMA2_REASON        0x28
+#define BCM43xx_MMIO_DMA2_IRQ_MASK      0x2C
+#define BCM43xx_MMIO_DMA3_REASON        0x30
+#define BCM43xx_MMIO_DMA3_IRQ_MASK      0x34
+#define BCM43xx_MMIO_DMA4_REASON        0x38
+#define BCM43xx_MMIO_DMA4_IRQ_MASK      0x3C
+#define BCM43xx_MMIO_STATUS_BITFIELD    0x120
+#define BCM43xx_MMIO_STATUS2_BITFIELD   0x124
+#define BCM43xx_MMIO_GEN_IRQ_REASON     0x128
+#define BCM43xx_MMIO_GEN_IRQ_MASK       0x12C
+#define BCM43xx_MMIO_RAM_CONTROL        0x130
+#define BCM43xx_MMIO_RAM_DATA           0x134
+#define BCM43xx_MMIO_PS_STATUS          0x140
+#define BCM43xx_MMIO_RADIO_HWENABLED_HI 0x158
+#define BCM43xx_MMIO_SHM_CONTROL        0x160
+#define BCM43xx_MMIO_SHM_DATA           0x164
+#define BCM43xx_MMIO_SHM_DATA_UNALIGNED 0x166
+#define BCM43xx_MMIO_XMITSTAT_0         0x170
+#define BCM43xx_MMIO_XMITSTAT_1         0x174
+#define BCM43xx_MMIO_REV3PLUS_TSF_LOW   0x180 /* core rev >= 3 only */
+#define BCM43xx_MMIO_REV3PLUS_TSF_HIGH  0x184 /* core rev >= 3 only */
+#define BCM43xx_MMIO_DMA1_BASE          0x200
+#define BCM43xx_MMIO_DMA2_BASE          0x220
+#define BCM43xx_MMIO_DMA3_BASE          0x240
+#define BCM43xx_MMIO_DMA4_BASE          0x260
+#define BCM43xx_MMIO_PIO1_BASE          0x300
+#define BCM43xx_MMIO_PIO2_BASE          0x310
+#define BCM43xx_MMIO_PIO3_BASE          0x320
+#define BCM43xx_MMIO_PIO4_BASE          0x330
+#define BCM43xx_MMIO_PHY_VER            0x3E0
+#define BCM43xx_MMIO_PHY_RADIO          0x3E2
+#define BCM43xx_MMIO_ANTENNA            0x3E8
+#define BCM43xx_MMIO_CHANNEL            0x3F0
+#define BCM43xx_MMIO_CHANNEL_EXT        0x3F4
+#define BCM43xx_MMIO_RADIO_CONTROL      0x3F6
+#define BCM43xx_MMIO_RADIO_DATA_HIGH    0x3F8
+#define BCM43xx_MMIO_RADIO_DATA_LOW     0x3FA
+#define BCM43xx_MMIO_PHY_CONTROL        0x3FC
+#define BCM43xx_MMIO_PHY_DATA           0x3FE
+#define BCM43xx_MMIO_MACFILTER_CONTROL  0x420
+#define BCM43xx_MMIO_MACFILTER_DATA     0x422
+#define BCM43xx_MMIO_RADIO_HWENABLED_LO 0x49A
+#define BCM43xx_MMIO_GPIO_CONTROL       0x49C
+#define BCM43xx_MMIO_GPIO_MASK          0x49E
+#define BCM43xx_MMIO_TSF_0              0x632 /* core rev < 3 only */
+#define BCM43xx_MMIO_TSF_1              0x634 /* core rev < 3 only */
+#define BCM43xx_MMIO_TSF_2              0x636 /* core rev < 3 only */
+#define BCM43xx_MMIO_TSF_3              0x638 /* core rev < 3 only */
+#define BCM43xx_MMIO_POWERUP_DELAY      0x6A8
+
+/* SPROM offsets. */
+#define BCM43xx_SPROM_BASE              0x1000
+#define BCM43xx_SPROM_BOARDFLAGS2       0x1c
+#define BCM43xx_SPROM_IL0MACADDR        0x24
+#define BCM43xx_SPROM_ET0MACADDR        0x27
+#define BCM43xx_SPROM_ET1MACADDR        0x2a
+#define BCM43xx_SPROM_ETHPHY            0x2d
+#define BCM43xx_SPROM_BOARDREV          0x2e
+#define BCM43xx_SPROM_PA0B0             0x2f
+#define BCM43xx_SPROM_PA0B1             0x30
+#define BCM43xx_SPROM_PA0B2             0x31
+#define BCM43xx_SPROM_WL0GPIO0          0x32
+#define BCM43xx_SPROM_WL0GPIO2          0x33
+#define BCM43xx_SPROM_MAXPWR            0x34
+#define BCM43xx_SPROM_PA1B0             0x35
+#define BCM43xx_SPROM_PA1B1             0x36
+#define BCM43xx_SPROM_PA1B2             0x37
+#define BCM43xx_SPROM_IDL_TSSI_TGT      0x38
+#define BCM43xx_SPROM_BOARDFLAGS        0x39
+#define BCM43xx_SPROM_ANTENNA_GAIN      0x3a
+#define BCM43xx_SPROM_VERSION           0x3f
+
+/* BCM43xx_SPROM_BOARDFLAGS values */
+#define BCM43xx_BFL_BTCOEXIST           0x0001 /* implements Bluetooth coexistance */
+#define BCM43xx_BFL_PACTRL              0x0002 /* GPIO 9 controlling the PA */
+#define BCM43xx_BFL_AIRLINEMODE         0x0004 /* implements GPIO 13 radio disable indication */
+#define BCM43xx_BFL_RSSI                0x0008 /* software calculates nrssi slope. */
+#define BCM43xx_BFL_ENETSPI             0x0010 /* has ephy roboswitch spi */
+#define BCM43xx_BFL_XTAL_NOSLOW         0x0020 /* no slow clock available */
+#define BCM43xx_BFL_CCKHIPWR            0x0040 /* can do high power CCK transmission */
+#define BCM43xx_BFL_ENETADM             0x0080 /* has ADMtek switch */
+#define BCM43xx_BFL_ENETVLAN            0x0100 /* can do vlan */
+#define BCM43xx_BFL_AFTERBURNER         0x0200 /* supports Afterburner mode */
+#define BCM43xx_BFL_NOPCI               0x0400 /* leaves PCI floating */
+#define BCM43xx_BFL_FEM                 0x0800 /* supports the Front End Module */
+
+/* GPIO register offset, in both ChipCommon and PCI core. */
+#define BCM43xx_GPIO_CONTROL            0x6c
+
+/* SHM Routing */
+#define BCM43xx_SHM_SHARED              0x0001
+#define BCM43xx_SHM_WIRELESS            0x0002
+#define BCM43xx_SHM_PCM                 0x0003
+#define BCM43xx_SHM_HWMAC               0x0004
+#define BCM43xx_SHM_UCODE               0x0300
+
+/* MacFilter offsets. */
+#define BCM43xx_MACFILTER_SELF          0x0000
+#define BCM43xx_MACFILTER_ASSOC         0x0003
+
+/* Chipcommon registers. */
+#define BCM43xx_CHIPCOMMON_CAPABILITIES         0x04
+#define BCM43xx_CHIPCOMMON_PLLONDELAY           0xB0
+#define BCM43xx_CHIPCOMMON_FREFSELDELAY         0xB4
+#define BCM43xx_CHIPCOMMON_SLOWCLKCTL           0xB8
+#define BCM43xx_CHIPCOMMON_SYSCLKCTL            0xC0
+
+/* PCI core specific registers. */
+#define BCM43xx_PCICORE_BCAST_ADDR      0x50
+#define BCM43xx_PCICORE_BCAST_DATA      0x54
+#define BCM43xx_PCICORE_SBTOPCI2        0x108
+
+/* SBTOPCI2 values. */
+#define BCM43xx_SBTOPCI2_PREFETCH       0x4
+#define BCM43xx_SBTOPCI2_BURST          0x8
+
+/* Chipcommon capabilities. */
+#define BCM43xx_CAPABILITIES_PCTL               0x00040000
+#define BCM43xx_CAPABILITIES_PLLMASK            0x00030000
+#define BCM43xx_CAPABILITIES_PLLSHIFT           16
+#define BCM43xx_CAPABILITIES_FLASHMASK          0x00000700
+#define BCM43xx_CAPABILITIES_FLASHSHIFT         8
+#define BCM43xx_CAPABILITIES_EXTBUSPRESENT      0x00000040
+#define BCM43xx_CAPABILITIES_UARTGPIO           0x00000020
+#define BCM43xx_CAPABILITIES_UARTCLOCKMASK      0x00000018
+#define BCM43xx_CAPABILITIES_UARTCLOCKSHIFT     3
+#define BCM43xx_CAPABILITIES_MIPSBIGENDIAN      0x00000004
+#define BCM43xx_CAPABILITIES_NRUARTSMASK        0x00000003
+
+/* PowerControl */
+#define BCM43xx_PCTL_IN                 0xB0
+#define BCM43xx_PCTL_OUT                0xB4
+#define BCM43xx_PCTL_OUTENABLE          0xB8
+#define BCM43xx_PCTL_XTAL_POWERUP       0x40
+#define BCM43xx_PCTL_PLL_POWERDOWN      0x80
+
+/* PowerControl Clock Modes */
+#define BCM43xx_PCTL_CLK_FAST           0x00
+#define BCM43xx_PCTL_CLK_SLOW           0x01
+#define BCM43xx_PCTL_CLK_DYNAMIC        0x02
+
+#define BCM43xx_PCTL_FORCE_SLOW         0x0800
+#define BCM43xx_PCTL_FORCE_PLL          0x1000
+#define BCM43xx_PCTL_DYN_XTAL           0x2000
+
+/* COREIDs */
+#define BCM43xx_COREID_CHIPCOMMON       0x800
+#define BCM43xx_COREID_ILINE20          0x801
+#define BCM43xx_COREID_SDRAM            0x803
+#define BCM43xx_COREID_PCI              0x804
+#define BCM43xx_COREID_MIPS             0x805
+#define BCM43xx_COREID_ETHERNET         0x806
+#define BCM43xx_COREID_V90              0x807
+#define BCM43xx_COREID_USB11_HOSTDEV    0x80a
+#define BCM43xx_COREID_IPSEC            0x80b
+#define BCM43xx_COREID_PCMCIA           0x80d
+#define BCM43xx_COREID_EXT_IF           0x80f
+#define BCM43xx_COREID_80211            0x812
+#define BCM43xx_COREID_MIPS_3302        0x816
+#define BCM43xx_COREID_USB11_HOST       0x817
+#define BCM43xx_COREID_USB11_DEV        0x818
+#define BCM43xx_COREID_USB20_HOST       0x819
+#define BCM43xx_COREID_USB20_DEV        0x81a
+#define BCM43xx_COREID_SDIO_HOST        0x81b
+
+/* Core Information Registers */
+#define BCM43xx_CIR_BASE                0xf00
+#define BCM43xx_CIR_SBTPSFLAG           (BCM43xx_CIR_BASE + 0x18)
+#define BCM43xx_CIR_SBIMSTATE           (BCM43xx_CIR_BASE + 0x90)
+#define BCM43xx_CIR_SBINTVEC            (BCM43xx_CIR_BASE + 0x94)
+#define BCM43xx_CIR_SBTMSTATELOW        (BCM43xx_CIR_BASE + 0x98)
+#define BCM43xx_CIR_SBTMSTATEHIGH       (BCM43xx_CIR_BASE + 0x9c)
+#define BCM43xx_CIR_SBIMCONFIGLOW       (BCM43xx_CIR_BASE + 0xa8)
+#define BCM43xx_CIR_SB_ID_HI            (BCM43xx_CIR_BASE + 0xfc)
+
+/* Mask to get the Backplane Flag Number from SBTPSFLAG. */
+#define BCM43xx_BACKPLANE_FLAG_NR_MASK  0x3f
+
+/* SBIMCONFIGLOW values/masks. */
+#define BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK         0x00000007
+#define BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT        0
+#define BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK         0x00000070
+#define BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT        4
+#define BCM43xx_SBIMCONFIGLOW_CONNID_MASK               0x00ff0000
+#define BCM43xx_SBIMCONFIGLOW_CONNID_SHIFT              16
+
+/* sbtmstatelow state flags */
+#define BCM43xx_SBTMSTATELOW_RESET              0x01
+#define BCM43xx_SBTMSTATELOW_REJECT             0x02
+#define BCM43xx_SBTMSTATELOW_CLOCK              0x10000
+#define BCM43xx_SBTMSTATELOW_FORCE_GATE_CLOCK   0x20000
+
+/* sbtmstatehigh state flags */
+#define BCM43xx_SBTMSTATEHIGH_SERROR            0x1
+#define BCM43xx_SBTMSTATEHIGH_BUSY              0x4
+
+/* sbimstate flags */
+#define BCM43xx_SBIMSTATE_IB_ERROR              0x20000
+#define BCM43xx_SBIMSTATE_TIMEOUT               0x40000
+
+/* PHYVersioning */
+#define BCM43xx_PHYTYPE_A               0x00
+#define BCM43xx_PHYTYPE_B               0x01
+#define BCM43xx_PHYTYPE_G               0x02
+
+/* PHYRegisters */
+#define BCM43xx_PHY_ILT_A_CTRL          0x0072
+#define BCM43xx_PHY_ILT_A_DATA1         0x0073
+#define BCM43xx_PHY_ILT_A_DATA2         0x0074
+#define BCM43xx_PHY_G_LO_CONTROL        0x0810
+#define BCM43xx_PHY_ILT_G_CTRL          0x0472
+#define BCM43xx_PHY_ILT_G_DATA1         0x0473
+#define BCM43xx_PHY_ILT_G_DATA2         0x0474
+#define BCM43xx_PHY_A_PCTL              0x007B
+#define BCM43xx_PHY_G_PCTL              0x0029
+#define BCM43xx_PHY_A_CRS               0x0029
+#define BCM43xx_PHY_RADIO_BITFIELD      0x0401
+#define BCM43xx_PHY_G_CRS               0x0429
+#define BCM43xx_PHY_NRSSILT_CTRL        0x0803
+#define BCM43xx_PHY_NRSSILT_DATA        0x0804
+
+/* RadioRegisters */
+#define BCM43xx_RADIOCTL_ID             0x01
+
+/* StatusBitField */
+#define BCM43xx_SBF_MAC_ENABLED         0x00000001
+#define BCM43xx_SBF_2                   0x00000002 /*FIXME: fix name*/
+#define BCM43xx_SBF_CORE_READY          0x00000004
+#define BCM43xx_SBF_400                 0x00000400 /*FIXME: fix name*/
+#define BCM43xx_SBF_4000                0x00004000 /*FIXME: fix name*/
+#define BCM43xx_SBF_8000                0x00008000 /*FIXME: fix name*/
+#define BCM43xx_SBF_XFER_REG_BYTESWAP   0x00010000
+#define BCM43xx_SBF_MODE_NOTADHOC       0x00020000
+#define BCM43xx_SBF_MODE_AP             0x00040000
+#define BCM43xx_SBF_RADIOREG_LOCK       0x00080000
+#define BCM43xx_SBF_MODE_MONITOR        0x00400000
+#define BCM43xx_SBF_MODE_PROMISC        0x01000000
+#define BCM43xx_SBF_PS1                 0x02000000
+#define BCM43xx_SBF_PS2                 0x04000000
+#define BCM43xx_SBF_NO_SSID_BCAST       0x08000000
+#define BCM43xx_SBF_TIME_UPDATE         0x10000000
+#define BCM43xx_SBF_80000000            0x80000000 /*FIXME: fix name*/
+
+/* MicrocodeFlagsBitfield (addr + lo-word values?)*/
+#define BCM43xx_UCODEFLAGS_OFFSET       0x005E
+
+#define BCM43xx_UCODEFLAG_AUTODIV       0x0001
+#define BCM43xx_UCODEFLAG_UNKBGPHY      0x0002
+#define BCM43xx_UCODEFLAG_UNKBPHY       0x0004
+#define BCM43xx_UCODEFLAG_UNKGPHY       0x0020
+#define BCM43xx_UCODEFLAG_UNKPACTRL     0x0040
+#define BCM43xx_UCODEFLAG_JAPAN         0x0080
+
+/* Generic-Interrupt reasons. */
+#define BCM43xx_IRQ_READY               (1 << 0)
+#define BCM43xx_IRQ_BEACON              (1 << 1)
+#define BCM43xx_IRQ_PS                  (1 << 2)
+#define BCM43xx_IRQ_REG124              (1 << 5)
+#define BCM43xx_IRQ_PMQ                 (1 << 6)
+#define BCM43xx_IRQ_PIO_WORKAROUND      (1 << 8)
+#define BCM43xx_IRQ_XMIT_ERROR          (1 << 11)
+#define BCM43xx_IRQ_RX                  (1 << 15)
+#define BCM43xx_IRQ_SCAN                (1 << 16)
+#define BCM43xx_IRQ_NOISE               (1 << 18)
+#define BCM43xx_IRQ_XMIT_STATUS         (1 << 29)
+
+#define BCM43xx_IRQ_ALL                 0xffffffff
+#define BCM43xx_IRQ_INITIAL             (BCM43xx_IRQ_PS |               \
+                                         BCM43xx_IRQ_REG124 |           \
+                                         BCM43xx_IRQ_PMQ |              \
+                                         BCM43xx_IRQ_XMIT_ERROR |       \
+                                         BCM43xx_IRQ_RX |               \
+                                         BCM43xx_IRQ_SCAN |             \
+                                         BCM43xx_IRQ_NOISE |            \
+                                         BCM43xx_IRQ_XMIT_STATUS)
+                                         
+
+/* Initial default iw_mode */
+#define BCM43xx_INITIAL_IWMODE                  IW_MODE_INFRA
+
+/* Values/Masks for the device TX header */
+#define BCM43xx_TXHDRFLAG_EXPECTACK             0x0001
+#define BCM43xx_TXHDRFLAG_FIRSTFRAGMENT         0x0008
+#define BCM43xx_TXHDRFLAG_DESTPSMODE            0x0020
+#define BCM43xx_TXHDRFLAG_FALLBACKOFDM          0x0100
+#define BCM43xx_TXHDRFLAG_FRAMEBURST            0x0800
+
+#define BCM43xx_TXHDRCTL_OFDM                   0x0001
+#define BCM43xx_TXHDRCTL_SHORT_PREAMBLE         0x0010
+#define BCM43xx_TXHDRCTL_ANTENNADIV_MASK        0x0030
+#define BCM43xx_TXHDRCTL_ANTENNADIV_SHIFT       8
+
+#define BCM43xx_TXHDR_WSEC_KEYINDEX_MASK        0x00F0
+#define BCM43xx_TXHDR_WSEC_KEYINDEX_SHIFT       4
+#define BCM43xx_TXHDR_WSEC_ALGO_MASK            0x0003
+#define BCM43xx_TXHDR_WSEC_ALGO_SHIFT           0
+
+/* Bus type PCI. */
+#define BCM43xx_BUSTYPE_PCI     0
+/* Bus type Silicone Backplane Bus. */
+#define BCM43xx_BUSTYPE_SB      1
+/* Bus type PCMCIA. */
+#define BCM43xx_BUSTYPE_PCMCIA  2
+
+/* Threshold values. */
+#define BCM43xx_MIN_RTS_THRESHOLD               1U
+#define BCM43xx_MAX_RTS_THRESHOLD               2304U
+#define BCM43xx_DEFAULT_RTS_THRESHOLD           BCM43xx_MAX_RTS_THRESHOLD
+
+#define BCM43xx_DEFAULT_SHORT_RETRY_LIMIT       7
+#define BCM43xx_DEFAULT_LONG_RETRY_LIMIT        4
+
+/* Max size of a security key */
+#define BCM43xx_SEC_KEYSIZE                     16
+/* Security algorithms. */
+enum {
+        BCM43xx_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */
+        BCM43xx_SEC_ALGO_WEP,
+        BCM43xx_SEC_ALGO_UNKNOWN,
+        BCM43xx_SEC_ALGO_AES,
+        BCM43xx_SEC_ALGO_WEP104,
+        BCM43xx_SEC_ALGO_TKIP,
+};
+
+#ifdef assert
+# undef assert
+#endif
+#ifdef CONFIG_BCM43XX_DEBUG
+#define assert(expr) \
+        do {                                                                    \
+                if (unlikely(!(expr))) {                                        \
+                printk(KERN_ERR PFX "ASSERTION FAILED (%s) at: %s:%d:%s()\n",   \
+                        #expr, __FILE__, __LINE__, __FUNCTION__);               \
+                }                                                               \
+        } while (0)
+#else
+#define assert(expr)    do { /* nothing */ } while (0)
+#endif
+
+/* rate limited printk(). */
+#ifdef printkl
+# undef printkl
+#endif
+#define printkl(f, x...)  do { if (printk_ratelimit()) printk(f ,##x); } while (0)
+/* rate limited printk() for debugging */
+#ifdef dprintkl
+# undef dprintkl
+#endif
+#ifdef CONFIG_BCM43XX_DEBUG
+# define dprintkl               printkl
+#else
+# define dprintkl(f, x...)      do { /* nothing */ } while (0)
+#endif
+
+/* Helper macro for if branches.
+ * An if branch marked with this macro is only taken in DEBUG mode.
+ * Example:
+ *      if (DEBUG_ONLY(foo == bar)) {
+ *              do something
+ *      }
+ *      In DEBUG mode, the branch will be taken if (foo == bar).
+ *      In non-DEBUG mode, the branch will never be taken.
+ */
+#ifdef DEBUG_ONLY
+# undef DEBUG_ONLY
+#endif
+#ifdef CONFIG_BCM43XX_DEBUG
+# define DEBUG_ONLY(x)  (x)
+#else
+# define DEBUG_ONLY(x)  0
+#endif
+
+/* debugging printk() */
+#ifdef dprintk
+# undef dprintk
+#endif
+#ifdef CONFIG_BCM43XX_DEBUG
+# define dprintk(f, x...)  do { printk(f ,##x); } while (0)
+#else
+# define dprintk(f, x...)  do { /* nothing */ } while (0)
+#endif
+
+
+struct net_device;
+struct pci_dev;
+struct workqueue_struct;
+struct bcm43xx_dmaring;
+struct bcm43xx_pioqueue;
+
+struct bcm43xx_initval {
+        u16 offset;
+        u16 size;
+        u32 value;
+} __attribute__((__packed__));
+
+/* Values for bcm430x_sprominfo.locale */
+enum {
+        BCM43xx_LOCALE_WORLD = 0,
+        BCM43xx_LOCALE_THAILAND,
+        BCM43xx_LOCALE_ISRAEL,
+        BCM43xx_LOCALE_JORDAN,
+        BCM43xx_LOCALE_CHINA,
+        BCM43xx_LOCALE_JAPAN,
+        BCM43xx_LOCALE_USA_CANADA_ANZ,
+        BCM43xx_LOCALE_EUROPE,
+        BCM43xx_LOCALE_USA_LOW,
+        BCM43xx_LOCALE_JAPAN_HIGH,
+        BCM43xx_LOCALE_ALL,
+        BCM43xx_LOCALE_NONE,
+};
+
+#define BCM43xx_SPROM_SIZE      64 /* in 16-bit words. */
+struct bcm43xx_sprominfo {
+        u16 boardflags2;
+        u8 il0macaddr[6];
+        u8 et0macaddr[6];
+        u8 et1macaddr[6];
+        u8 et0phyaddr:5;
+        u8 et1phyaddr:5;
+        u8 et0mdcport:1;
+        u8 et1mdcport:1;
+        u8 boardrev;
+        u8 locale:4;
+        u8 antennas_aphy:2;
+        u8 antennas_bgphy:2;
+        u16 pa0b0;
+        u16 pa0b1;
+        u16 pa0b2;
+        u8 wl0gpio0;
+        u8 wl0gpio1;
+        u8 wl0gpio2;
+        u8 wl0gpio3;
+        u8 maxpower_aphy;
+        u8 maxpower_bgphy;
+        u16 pa1b0;
+        u16 pa1b1;
+        u16 pa1b2;
+        u8 idle_tssi_tgt_aphy;
+        u8 idle_tssi_tgt_bgphy;
+        u16 boardflags;
+        u16 antennagain_aphy;
+        u16 antennagain_bgphy;
+};
+
+/* Value pair to measure the LocalOscillator. */
+struct bcm43xx_lopair {
+        s8 low;
+        s8 high;
+        u8 used:1;
+};
+#define BCM43xx_LO_COUNT        (14*4)
+
+struct bcm43xx_phyinfo {
+        /* Hardware Data */
+        u8 version;
+        u8 type;
+        u8 rev;
+        u16 antenna_diversity;
+        u16 savedpctlreg;
+        u16 minlowsig[2];
+        u16 minlowsigpos[2];
+        u8 connected:1,
+           calibrated:1,
+           is_locked:1, /* used in bcm43xx_phy_{un}lock() */
+           dyn_tssi_tbl:1; /* used in bcm43xx_phy_init_tssi2dbm_table() */
+        /* LO Measurement Data.
+         * Use bcm43xx_get_lopair() to get a value.
+         */
+        struct bcm43xx_lopair *_lo_pairs;
+
+        /* TSSI to dBm table in use */
+        const s8 *tssi2dbm;
+        /* idle TSSI value */
+        s8 idle_tssi;
+        /* PHY lock for core.rev < 3
+         * This lock is only used by bcm43xx_phy_{un}lock()
+         */
+        spinlock_t lock;
+};
+
+
+struct bcm43xx_radioinfo {
+        u16 manufact;
+        u16 version;
+        u8 revision;
+
+        /* 0: baseband attenuation,
+         * 1: radio attenuation, 
+         * 2: tx_CTL1
+         * 3: tx_CTL2
+         */
+        u16 txpower[4];
+        /* Current Interference Mitigation mode */
+        int interfmode;
+        /* Stack of saved values from the Interference Mitigation code */
+        u16 interfstack[20];
+        /* Saved values from the NRSSI Slope calculation */
+        s16 nrssi[2];
+        s32 nrssislope;
+        /* In memory nrssi lookup table. */
+        s8 nrssi_lt[64];
+
+        /* current channel */
+        u8 channel;
+        u8 initial_channel;
+
+        u16 lofcal;
+
+        u16 initval;
+
+        u8 enabled:1;
+        /* ACI (adjacent channel interference) flags. */
+        u8 aci_enable:1,
+           aci_wlan_automatic:1,
+           aci_hw_rssi:1;
+};
+
+/* Data structures for DMA transmission, per 80211 core. */
+struct bcm43xx_dma {
+        struct bcm43xx_dmaring *tx_ring0;
+        struct bcm43xx_dmaring *tx_ring1;
+        struct bcm43xx_dmaring *tx_ring2;
+        struct bcm43xx_dmaring *tx_ring3;
+        struct bcm43xx_dmaring *rx_ring0;
+        struct bcm43xx_dmaring *rx_ring1; /* only available on core.rev < 5 */
+};
+
+/* Data structures for PIO transmission, per 80211 core. */
+struct bcm43xx_pio {
+        struct bcm43xx_pioqueue *queue0;
+        struct bcm43xx_pioqueue *queue1;
+        struct bcm43xx_pioqueue *queue2;
+        struct bcm43xx_pioqueue *queue3;
+};
+
+#define BCM43xx_MAX_80211_CORES         2
+
+#define BCM43xx_COREFLAG_AVAILABLE      (1 << 0)
+#define BCM43xx_COREFLAG_ENABLED        (1 << 1)
+#define BCM43xx_COREFLAG_INITIALIZED    (1 << 2)
+
+#ifdef CONFIG_BCM947XX
+#define core_offset(bcm) (bcm)->current_core_offset
+#else
+#define core_offset(bcm) 0
+#endif
+
+struct bcm43xx_coreinfo {
+        /** Driver internal flags. See BCM43xx_COREFLAG_* */
+        u32 flags;
+        /** core_id ID number */
+        u16 id;
+        /** core_rev revision number */
+        u8 rev;
+        /** Index number for _switch_core() */
+        u8 index;
+        /* Pointer to the PHYinfo, which belongs to this core (if 80211 core) */
+        struct bcm43xx_phyinfo *phy;
+        /* Pointer to the RadioInfo, which belongs to this core (if 80211 core) */
+        struct bcm43xx_radioinfo *radio;
+        /* Pointer to the DMA rings, which belong to this core (if 80211 core) */
+        struct bcm43xx_dma *dma;
+        /* Pointer to the PIO queues, which belong to this core (if 80211 core) */
+        struct bcm43xx_pio *pio;
+};
+
+/* Context information for a noise calculation (Link Quality). */
+struct bcm43xx_noise_calculation {
+        struct bcm43xx_coreinfo *core_at_start;
+        u8 channel_at_start;
+        u8 calculation_running:1;
+        u8 nr_samples;
+        s8 samples[8][4];
+};
+
+struct bcm43xx_stats {
+        u8 link_quality;
+        /* Store the last TX/RX times here for updating the leds. */
+        unsigned long last_tx;
+        unsigned long last_rx;
+};
+
+struct bcm43xx_key {
+        u8 enabled:1;
+        u8 algorithm;
+};
+
+struct bcm43xx_private {
+        struct ieee80211_device *ieee;
+        struct ieee80211softmac_device *softmac;
+
+        struct net_device *net_dev;
+        struct pci_dev *pci_dev;
+        unsigned int irq;
+
+        void __iomem *mmio_addr;
+        unsigned int mmio_len;
+
+        spinlock_t lock;
+
+        /* Driver status flags. */
+        u32 initialized:1,              /* init_board() succeed */
+            was_initialized:1,          /* for PCI suspend/resume. */
+            shutting_down:1,            /* free_board() in progress */
+            pio_mode:1,                 /* PIO (if true), or DMA (if false) used. */
+            bad_frames_preempt:1,       /* Use "Bad Frames Preemption" (default off) */
+            reg124_set_0x4:1,           /* Some variable to keep track of IRQ stuff. */
+            powersaving:1,              /* TRUE if we are in PowerSaving mode. FALSE otherwise. */
+            short_preamble:1,           /* TRUE, if short preamble is enabled. */
+            firmware_norelease:1;       /* Do not release the firmware. Used on suspend. */
+
+        struct bcm43xx_stats stats;
+
+        /* Bus type we are connected to.
+         * This is currently always BCM43xx_BUSTYPE_PCI
+         */
+        u8 bustype;
+
+        u16 board_vendor;
+        u16 board_type;
+        u16 board_revision;
+
+        u16 chip_id;
+        u8 chip_rev;
+
+        struct bcm43xx_sprominfo sprom;
+#define BCM43xx_NR_LEDS         4
+        struct bcm43xx_led leds[BCM43xx_NR_LEDS];
+
+        /* The currently active core. NULL if not initialized, yet. */
+        struct bcm43xx_coreinfo *current_core;
+#ifdef CONFIG_BCM947XX
+        /** current core memory offset */
+        u32 current_core_offset;
+#endif
+        struct bcm43xx_coreinfo *active_80211_core;
+        /* coreinfo structs for all possible cores follow.
+         * Note that a core might not exist.
+         * So check the coreinfo flags before using it.
+         */
+        struct bcm43xx_coreinfo core_chipcommon;
+        struct bcm43xx_coreinfo core_pci;
+        struct bcm43xx_coreinfo core_v90;
+        struct bcm43xx_coreinfo core_pcmcia;
+        struct bcm43xx_coreinfo core_ethernet;
+        struct bcm43xx_coreinfo core_80211[ BCM43xx_MAX_80211_CORES ];
+        /* Info about the PHY for each 80211 core. */
+        struct bcm43xx_phyinfo phy[ BCM43xx_MAX_80211_CORES ];
+        /* Info about the Radio for each 80211 core. */
+        struct bcm43xx_radioinfo radio[ BCM43xx_MAX_80211_CORES ];
+        /* DMA */
+        struct bcm43xx_dma dma[ BCM43xx_MAX_80211_CORES ];
+        /* PIO */
+        struct bcm43xx_pio pio[ BCM43xx_MAX_80211_CORES ];
+
+        u32 chipcommon_capabilities;
+
+        /* Reason code of the last interrupt. */
+        u32 irq_reason;
+        u32 dma_reason[4];
+        /* saved irq enable/disable state bitfield. */
+        u32 irq_savedstate;
+        /* Link Quality calculation context. */
+        struct bcm43xx_noise_calculation noisecalc;
+
+        /* Threshold values. */
+        //TODO: The RTS thr has to be _used_. Currently, it is only set via WX.
+        u32 rts_threshold;
+
+        /* Interrupt Service Routine tasklet (bottom-half) */
+        struct tasklet_struct isr_tasklet;
+        /* Custom driver work queue. */
+        struct workqueue_struct *workqueue;
+
+        /* Periodic tasks */
+        struct work_struct periodic_work0;
+#define BCM43xx_PERIODIC_0_DELAY                (HZ * 15)
+        struct work_struct periodic_work1;
+#define BCM43xx_PERIODIC_1_DELAY                ((HZ * 60) + HZ / 2)
+        struct work_struct periodic_work2;
+#define BCM43xx_PERIODIC_2_DELAY                ((HZ * 120) + HZ)
+        struct work_struct periodic_work3;
+#define BCM43xx_PERIODIC_3_DELAY                ((HZ * 30) + HZ / 5)
+
+        struct work_struct restart_work;
+
+        /* Informational stuff. */
+        char nick[IW_ESSID_MAX_SIZE + 1];
+
+        /* encryption/decryption */
+        u16 security_offset;
+        struct bcm43xx_key key[54];
+        u8 default_key_idx;
+
+        /* Firmware. */
+        const struct firmware *ucode;
+        const struct firmware *pcm;
+        const struct firmware *initvals0;
+        const struct firmware *initvals1;
+
+        /* Debugging stuff follows. */
+#ifdef CONFIG_BCM43XX_DEBUG
+        struct bcm43xx_dfsentry *dfsentry;
+        atomic_t mmio_print_cnt;
+        atomic_t pcicfg_print_cnt;
+#endif
+};
+
+static inline
+struct bcm43xx_private * bcm43xx_priv(struct net_device *dev)
+{
+        return ieee80211softmac_priv(dev);
+}
+
+static inline
+int bcm43xx_num_80211_cores(struct bcm43xx_private *bcm)
+{
+        int i, cnt = 0;
+
+        for (i = 0; i < BCM43xx_MAX_80211_CORES; i++) {
+                if (bcm->core_80211[i].flags & BCM43xx_COREFLAG_AVAILABLE)
+                        cnt++;
+        }
+
+        return cnt;
+}
+
+/* Are we running in init_board() context? */
+static inline
+int bcm43xx_is_initializing(struct bcm43xx_private *bcm)
+{
+        if (bcm->initialized)
+                return 0;
+        if (bcm->shutting_down)
+                return 0;
+        return 1;
+}
+
+static inline
+struct bcm43xx_lopair * bcm43xx_get_lopair(struct bcm43xx_phyinfo *phy,
+                                           u16 radio_attenuation,
+                                           u16 baseband_attenuation)
+{
+        return phy->_lo_pairs + (radio_attenuation + 14 * (baseband_attenuation / 2));
+}
+
+
+/* MMIO read/write functions. Debug and non-debug variants. */
+#ifdef CONFIG_BCM43XX_DEBUG
+
+static inline
+u16 bcm43xx_read16(struct bcm43xx_private *bcm, u16 offset)
+{
+        u16 value;
+
+        value = ioread16(bcm->mmio_addr + core_offset(bcm) + offset);
+        if (unlikely(atomic_read(&bcm->mmio_print_cnt) > 0)) {
+                printk(KERN_INFO PFX "ioread16   offset: 0x%04x, value: 0x%04x\n",
+                       offset, value);
+        }
+
+        return value;
+}
+
+static inline
+void bcm43xx_write16(struct bcm43xx_private *bcm, u16 offset, u16 value)
+{
+        iowrite16(value, bcm->mmio_addr + core_offset(bcm) + offset);
+        if (unlikely(atomic_read(&bcm->mmio_print_cnt) > 0)) {
+                printk(KERN_INFO PFX "iowrite16  offset: 0x%04x, value: 0x%04x\n",
+                       offset, value);
+        }
+}
+
+static inline
+u32 bcm43xx_read32(struct bcm43xx_private *bcm, u16 offset)
+{
+        u32 value;
+
+        value = ioread32(bcm->mmio_addr + core_offset(bcm) + offset);
+        if (unlikely(atomic_read(&bcm->mmio_print_cnt) > 0)) {
+                printk(KERN_INFO PFX "ioread32   offset: 0x%04x, value: 0x%08x\n",
+                       offset, value);
+        }
+
+        return value;
+}
+
+static inline
+void bcm43xx_write32(struct bcm43xx_private *bcm, u16 offset, u32 value)
+{
+        iowrite32(value, bcm->mmio_addr + core_offset(bcm) + offset);
+        if (unlikely(atomic_read(&bcm->mmio_print_cnt) > 0)) {
+                printk(KERN_INFO PFX "iowrite32  offset: 0x%04x, value: 0x%08x\n",
+                       offset, value);
+        }
+}
+
+static inline
+int bcm43xx_pci_read_config16(struct bcm43xx_private *bcm, int offset, u16 *value)
+{
+        int err;
+
+        err = pci_read_config_word(bcm->pci_dev, offset, value);
+        if (unlikely(atomic_read(&bcm->pcicfg_print_cnt) > 0)) {
+                printk(KERN_INFO PFX "pciread16   offset: 0x%08x, value: 0x%04x, err: %d\n",
+                       offset, *value, err);
+        }
+
+        return err;
+}
+
+static inline
+int bcm43xx_pci_read_config32(struct bcm43xx_private *bcm, int offset, u32 *value)
+{
+        int err;
+
+        err = pci_read_config_dword(bcm->pci_dev, offset, value);
+        if (unlikely(atomic_read(&bcm->pcicfg_print_cnt) > 0)) {
+                printk(KERN_INFO PFX "pciread32   offset: 0x%08x, value: 0x%08x, err: %d\n",
+                       offset, *value, err);
+        }
+
+        return err;
+}
+
+static inline
+int bcm43xx_pci_write_config16(struct bcm43xx_private *bcm, int offset, u16 value)
+{
+        int err;
+
+        err = pci_write_config_word(bcm->pci_dev, offset, value);
+        if (unlikely(atomic_read(&bcm->pcicfg_print_cnt) > 0)) {
+                printk(KERN_INFO PFX "pciwrite16  offset: 0x%08x, value: 0x%04x, err: %d\n",
+                       offset, value, err);
+        }
+
+        return err;
+}
+
+static inline
+int bcm43xx_pci_write_config32(struct bcm43xx_private *bcm, int offset, u32 value)
+{
+        int err;
+
+        err = pci_write_config_dword(bcm->pci_dev, offset, value);
+        if (unlikely(atomic_read(&bcm->pcicfg_print_cnt) > 0)) {
+                printk(KERN_INFO PFX "pciwrite32  offset: 0x%08x, value: 0x%08x, err: %d\n",
+                       offset, value, err);
+        }
+
+        return err;
+}
+
+#define bcm43xx_mmioprint_initial(bcm, value)   atomic_set(&(bcm)->mmio_print_cnt, (value))
+#define bcm43xx_mmioprint_enable(bcm)           atomic_inc(&(bcm)->mmio_print_cnt)
+#define bcm43xx_mmioprint_disable(bcm)          atomic_dec(&(bcm)->mmio_print_cnt)
+#define bcm43xx_pciprint_initial(bcm, value)    atomic_set(&(bcm)->pcicfg_print_cnt, (value))
+#define bcm43xx_pciprint_enable(bcm)            atomic_inc(&(bcm)->pcicfg_print_cnt)
+#define bcm43xx_pciprint_disable(bcm)           atomic_dec(&(bcm)->pcicfg_print_cnt)
+
+#else /* CONFIG_BCM43XX_DEBUG*/
+
+#define bcm43xx_read16(bcm, offset)             ioread16((bcm)->mmio_addr + core_offset(bcm) + (offset))
+#define bcm43xx_write16(bcm, offset, value)     iowrite16((value), (bcm)->mmio_addr + core_offset(bcm) + (offset))
+#define bcm43xx_read32(bcm, offset)             ioread32((bcm)->mmio_addr + core_offset(bcm) + (offset))
+#define bcm43xx_write32(bcm, offset, value)     iowrite32((value), (bcm)->mmio_addr + core_offset(bcm) + (offset))
+#define bcm43xx_pci_read_config16(bcm, o, v)    pci_read_config_word((bcm)->pci_dev, (o), (v))
+#define bcm43xx_pci_read_config32(bcm, o, v)    pci_read_config_dword((bcm)->pci_dev, (o), (v))
+#define bcm43xx_pci_write_config16(bcm, o, v)   pci_write_config_word((bcm)->pci_dev, (o), (v))
+#define bcm43xx_pci_write_config32(bcm, o, v)   pci_write_config_dword((bcm)->pci_dev, (o), (v))
+
+#define bcm43xx_mmioprint_initial(x, y)         do { /* nothing */ } while (0)
+#define bcm43xx_mmioprint_enable(x)             do { /* nothing */ } while (0)
+#define bcm43xx_mmioprint_disable(x)            do { /* nothing */ } while (0)
+#define bcm43xx_pciprint_initial(bcm, value)    do { /* nothing */ } while (0)
+#define bcm43xx_pciprint_enable(bcm)            do { /* nothing */ } while (0)
+#define bcm43xx_pciprint_disable(bcm)           do { /* nothing */ } while (0)
+
+#endif /* CONFIG_BCM43XX_DEBUG*/
+
+
+/** Limit a value between two limits */
+#ifdef limit_value
+# undef limit_value
+#endif
+#define limit_value(value, min, max)  \
+        ({                                              \
+                typeof(value) __value = (value);        \
+                typeof(value) __min = (min);            \
+                typeof(value) __max = (max);            \
+                if (__value < __min)                    \
+                        __value = __min;                \
+                else if (__value > __max)               \
+                        __value = __max;                \
+                __value;                                \
+        })
+
+
+/*
+ * Compatibility stuff follows
+ */
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 15)
+# error "The bcm43xx driver does not support kernels < 2.6.15"
+# error "The driver will _NOT_ compile on your kernel. Please upgrade to the latest 2.6 kernel."
+# error "DO NOT COMPLAIN ABOUT BUGS. UPDATE FIRST AND TRY AGAIN."
+#else
+# if !defined(CONFIG_IEEE80211_MODULE) && !defined(CONFIG_IEEE80211)
+#  error "Generic IEEE 802.11 Networking Stack (CONFIG_IEEE80211) not available."
+# endif
+#endif
+#ifdef IEEE80211SOFTMAC_API
+# if IEEE80211SOFTMAC_API != 0
+#  warning "Incompatible SoftMAC subsystem installed."
+# endif
+#else
+# error "The bcm43xx driver requires the SoftMAC subsystem."
+# error "SEE >>>>>>    http://softmac.sipsolutions.net/    <<<<<<"
+#endif
+
+#endif /* BCM43xx_H_ */