1 files changed, 845 insertions, 0 deletions

diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
new file mode 100644
index 000000000000..270a2112de2a
--- /dev/null
+++ b/drivers/net/wireless/b43/b43.h
@@ -0,0 +1,845 @@
+#ifndef B43_H_
+#define B43_H_
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/hw_random.h>
+#include <linux/ssb/ssb.h>
+#include <net/mac80211.h>
+
+#include "debugfs.h"
+#include "leds.h"
+#include "lo.h"
+#include "phy.h"
+
+#ifdef CONFIG_B43_DEBUG
+# define B43_DEBUG      1
+#else
+# define B43_DEBUG      0
+#endif
+
+#define B43_RX_MAX_SSI                  60
+
+/* MMIO offsets */
+#define B43_MMIO_DMA0_REASON            0x20
+#define B43_MMIO_DMA0_IRQ_MASK          0x24
+#define B43_MMIO_DMA1_REASON            0x28
+#define B43_MMIO_DMA1_IRQ_MASK          0x2C
+#define B43_MMIO_DMA2_REASON            0x30
+#define B43_MMIO_DMA2_IRQ_MASK          0x34
+#define B43_MMIO_DMA3_REASON            0x38
+#define B43_MMIO_DMA3_IRQ_MASK          0x3C
+#define B43_MMIO_DMA4_REASON            0x40
+#define B43_MMIO_DMA4_IRQ_MASK          0x44
+#define B43_MMIO_DMA5_REASON            0x48
+#define B43_MMIO_DMA5_IRQ_MASK          0x4C
+#define B43_MMIO_MACCTL                 0x120
+#define B43_MMIO_STATUS2_BITFIELD       0x124
+#define B43_MMIO_GEN_IRQ_REASON         0x128
+#define B43_MMIO_GEN_IRQ_MASK           0x12C
+#define B43_MMIO_RAM_CONTROL            0x130
+#define B43_MMIO_RAM_DATA               0x134
+#define B43_MMIO_PS_STATUS              0x140
+#define B43_MMIO_RADIO_HWENABLED_HI     0x158
+#define B43_MMIO_SHM_CONTROL            0x160
+#define B43_MMIO_SHM_DATA               0x164
+#define B43_MMIO_SHM_DATA_UNALIGNED     0x166
+#define B43_MMIO_XMITSTAT_0             0x170
+#define B43_MMIO_XMITSTAT_1             0x174
+#define B43_MMIO_REV3PLUS_TSF_LOW       0x180   /* core rev >= 3 only */
+#define B43_MMIO_REV3PLUS_TSF_HIGH      0x184   /* core rev >= 3 only */
+
+/* 32-bit DMA */
+#define B43_MMIO_DMA32_BASE0            0x200
+#define B43_MMIO_DMA32_BASE1            0x220
+#define B43_MMIO_DMA32_BASE2            0x240
+#define B43_MMIO_DMA32_BASE3            0x260
+#define B43_MMIO_DMA32_BASE4            0x280
+#define B43_MMIO_DMA32_BASE5            0x2A0
+/* 64-bit DMA */
+#define B43_MMIO_DMA64_BASE0            0x200
+#define B43_MMIO_DMA64_BASE1            0x240
+#define B43_MMIO_DMA64_BASE2            0x280
+#define B43_MMIO_DMA64_BASE3            0x2C0
+#define B43_MMIO_DMA64_BASE4            0x300
+#define B43_MMIO_DMA64_BASE5            0x340
+/* PIO */
+#define B43_MMIO_PIO1_BASE              0x300
+#define B43_MMIO_PIO2_BASE              0x310
+#define B43_MMIO_PIO3_BASE              0x320
+#define B43_MMIO_PIO4_BASE              0x330
+
+#define B43_MMIO_PHY_VER                0x3E0
+#define B43_MMIO_PHY_RADIO              0x3E2
+#define B43_MMIO_PHY0                   0x3E6
+#define B43_MMIO_ANTENNA                0x3E8
+#define B43_MMIO_CHANNEL                0x3F0
+#define B43_MMIO_CHANNEL_EXT            0x3F4
+#define B43_MMIO_RADIO_CONTROL          0x3F6
+#define B43_MMIO_RADIO_DATA_HIGH        0x3F8
+#define B43_MMIO_RADIO_DATA_LOW         0x3FA
+#define B43_MMIO_PHY_CONTROL            0x3FC
+#define B43_MMIO_PHY_DATA               0x3FE
+#define B43_MMIO_MACFILTER_CONTROL      0x420
+#define B43_MMIO_MACFILTER_DATA         0x422
+#define B43_MMIO_RCMTA_COUNT            0x43C
+#define B43_MMIO_RADIO_HWENABLED_LO     0x49A
+#define B43_MMIO_GPIO_CONTROL           0x49C
+#define B43_MMIO_GPIO_MASK              0x49E
+#define B43_MMIO_TSF_0                  0x632   /* core rev < 3 only */
+#define B43_MMIO_TSF_1                  0x634   /* core rev < 3 only */
+#define B43_MMIO_TSF_2                  0x636   /* core rev < 3 only */
+#define B43_MMIO_TSF_3                  0x638   /* core rev < 3 only */
+#define B43_MMIO_RNG                    0x65A
+#define B43_MMIO_POWERUP_DELAY          0x6A8
+
+/* SPROM boardflags_lo values */
+#define B43_BFL_BTCOEXIST               0x0001  /* implements Bluetooth coexistance */
+#define B43_BFL_PACTRL                  0x0002  /* GPIO 9 controlling the PA */
+#define B43_BFL_AIRLINEMODE             0x0004  /* implements GPIO 13 radio disable indication */
+#define B43_BFL_RSSI                    0x0008  /* software calculates nrssi slope. */
+#define B43_BFL_ENETSPI                 0x0010  /* has ephy roboswitch spi */
+#define B43_BFL_XTAL_NOSLOW             0x0020  /* no slow clock available */
+#define B43_BFL_CCKHIPWR                0x0040  /* can do high power CCK transmission */
+#define B43_BFL_ENETADM                 0x0080  /* has ADMtek switch */
+#define B43_BFL_ENETVLAN                0x0100  /* can do vlan */
+#define B43_BFL_AFTERBURNER             0x0200  /* supports Afterburner mode */
+#define B43_BFL_NOPCI                   0x0400  /* leaves PCI floating */
+#define B43_BFL_FEM                     0x0800  /* supports the Front End Module */
+#define B43_BFL_EXTLNA                  0x1000  /* has an external LNA */
+#define B43_BFL_HGPA                    0x2000  /* had high gain PA */
+#define B43_BFL_BTCMOD                  0x4000  /* BFL_BTCOEXIST is given in alternate GPIOs */
+#define B43_BFL_ALTIQ                   0x8000  /* alternate I/Q settings */
+
+/* GPIO register offset, in both ChipCommon and PCI core. */
+#define B43_GPIO_CONTROL                0x6c
+
+/* SHM Routing */
+enum {
+        B43_SHM_UCODE,          /* Microcode memory */
+        B43_SHM_SHARED,         /* Shared memory */
+        B43_SHM_SCRATCH,        /* Scratch memory */
+        B43_SHM_HW,             /* Internal hardware register */
+        B43_SHM_RCMTA,          /* Receive match transmitter address (rev >= 5 only) */
+};
+/* SHM Routing modifiers */
+#define B43_SHM_AUTOINC_R               0x0200  /* Auto-increment address on read */
+#define B43_SHM_AUTOINC_W               0x0100  /* Auto-increment address on write */
+#define B43_SHM_AUTOINC_RW              (B43_SHM_AUTOINC_R | \
+                                         B43_SHM_AUTOINC_W)
+
+/* Misc SHM_SHARED offsets */
+#define B43_SHM_SH_WLCOREREV            0x0016  /* 802.11 core revision */
+#define B43_SHM_SH_PCTLWDPOS            0x0008
+#define B43_SHM_SH_RXPADOFF             0x0034  /* RX Padding data offset (PIO only) */
+#define B43_SHM_SH_PHYVER               0x0050  /* PHY version */
+#define B43_SHM_SH_PHYTYPE              0x0052  /* PHY type */
+#define B43_SHM_SH_ANTSWAP              0x005C  /* Antenna swap threshold */
+#define B43_SHM_SH_HOSTFLO              0x005E  /* Hostflags for ucode options (low) */
+#define B43_SHM_SH_HOSTFHI              0x0060  /* Hostflags for ucode options (high) */
+#define B43_SHM_SH_RFATT                0x0064  /* Current radio attenuation value */
+#define B43_SHM_SH_RADAR                0x0066  /* Radar register */
+#define B43_SHM_SH_PHYTXNOI             0x006E  /* PHY noise directly after TX (lower 8bit only) */
+#define B43_SHM_SH_RFRXSP1              0x0072  /* RF RX SP Register 1 */
+#define B43_SHM_SH_CHAN                 0x00A0  /* Current channel (low 8bit only) */
+#define  B43_SHM_SH_CHAN_5GHZ           0x0100  /* Bit set, if 5Ghz channel */
+#define B43_SHM_SH_BCMCFIFOID           0x0108  /* Last posted cookie to the bcast/mcast FIFO */
+/* SHM_SHARED TX FIFO variables */
+#define B43_SHM_SH_SIZE01               0x0098  /* TX FIFO size for FIFO 0 (low) and 1 (high) */
+#define B43_SHM_SH_SIZE23               0x009A  /* TX FIFO size for FIFO 2 and 3 */
+#define B43_SHM_SH_SIZE45               0x009C  /* TX FIFO size for FIFO 4 and 5 */
+#define B43_SHM_SH_SIZE67               0x009E  /* TX FIFO size for FIFO 6 and 7 */
+/* SHM_SHARED background noise */
+#define B43_SHM_SH_JSSI0                0x0088  /* Measure JSSI 0 */
+#define B43_SHM_SH_JSSI1                0x008A  /* Measure JSSI 1 */
+#define B43_SHM_SH_JSSIAUX              0x008C  /* Measure JSSI AUX */
+/* SHM_SHARED crypto engine */
+#define B43_SHM_SH_DEFAULTIV            0x003C  /* Default IV location */
+#define B43_SHM_SH_NRRXTRANS            0x003E  /* # of soft RX transmitter addresses (max 8) */
+#define B43_SHM_SH_KTP                  0x0056  /* Key table pointer */
+#define B43_SHM_SH_TKIPTSCTTAK          0x0318
+#define B43_SHM_SH_KEYIDXBLOCK          0x05D4  /* Key index/algorithm block (v4 firmware) */
+#define B43_SHM_SH_PSM                  0x05F4  /* PSM transmitter address match block (rev < 5) */
+/* SHM_SHARED WME variables */
+#define B43_SHM_SH_EDCFSTAT             0x000E  /* EDCF status */
+#define B43_SHM_SH_TXFCUR               0x0030  /* TXF current index */
+#define B43_SHM_SH_EDCFQ                0x0240  /* EDCF Q info */
+/* SHM_SHARED powersave mode related */
+#define B43_SHM_SH_SLOTT                0x0010  /* Slot time */
+#define B43_SHM_SH_DTIMPER              0x0012  /* DTIM period */
+#define B43_SHM_SH_NOSLPZNATDTIM        0x004C  /* NOSLPZNAT DTIM */
+/* SHM_SHARED beacon variables */
+#define B43_SHM_SH_BTL0                 0x0018  /* Beacon template length 0 */
+#define B43_SHM_SH_BTL1                 0x001A  /* Beacon template length 1 */
+#define B43_SHM_SH_BTSFOFF              0x001C  /* Beacon TSF offset */
+#define B43_SHM_SH_TIMBPOS              0x001E  /* TIM B position in beacon */
+#define B43_SHM_SH_SFFBLIM              0x0044  /* Short frame fallback retry limit */
+#define B43_SHM_SH_LFFBLIM              0x0046  /* Long frame fallback retry limit */
+#define B43_SHM_SH_BEACPHYCTL           0x0054  /* Beacon PHY TX control word (see PHY TX control) */
+/* SHM_SHARED ACK/CTS control */
+#define B43_SHM_SH_ACKCTSPHYCTL         0x0022  /* ACK/CTS PHY control word (see PHY TX control) */
+/* SHM_SHARED probe response variables */
+#define B43_SHM_SH_PRSSID               0x0160  /* Probe Response SSID */
+#define B43_SHM_SH_PRSSIDLEN            0x0048  /* Probe Response SSID length */
+#define B43_SHM_SH_PRTLEN               0x004A  /* Probe Response template length */
+#define B43_SHM_SH_PRMAXTIME            0x0074  /* Probe Response max time */
+#define B43_SHM_SH_PRPHYCTL             0x0188  /* Probe Response PHY TX control word */
+/* SHM_SHARED rate tables */
+#define B43_SHM_SH_OFDMDIRECT           0x01C0  /* Pointer to OFDM direct map */
+#define B43_SHM_SH_OFDMBASIC            0x01E0  /* Pointer to OFDM basic rate map */
+#define B43_SHM_SH_CCKDIRECT            0x0200  /* Pointer to CCK direct map */
+#define B43_SHM_SH_CCKBASIC             0x0220  /* Pointer to CCK basic rate map */
+/* SHM_SHARED microcode soft registers */
+#define B43_SHM_SH_UCODEREV             0x0000  /* Microcode revision */
+#define B43_SHM_SH_UCODEPATCH           0x0002  /* Microcode patchlevel */
+#define B43_SHM_SH_UCODEDATE            0x0004  /* Microcode date */
+#define B43_SHM_SH_UCODETIME            0x0006  /* Microcode time */
+#define B43_SHM_SH_UCODESTAT            0x0040  /* Microcode debug status code */
+#define  B43_SHM_SH_UCODESTAT_INVALID   0
+#define  B43_SHM_SH_UCODESTAT_INIT      1
+#define  B43_SHM_SH_UCODESTAT_ACTIVE    2
+#define  B43_SHM_SH_UCODESTAT_SUSP      3       /* suspended */
+#define  B43_SHM_SH_UCODESTAT_SLEEP     4       /* asleep (PS) */
+#define B43_SHM_SH_MAXBFRAMES           0x0080  /* Maximum number of frames in a burst */
+#define B43_SHM_SH_SPUWKUP              0x0094  /* pre-wakeup for synth PU in us */
+#define B43_SHM_SH_PRETBTT              0x0096  /* pre-TBTT in us */
+
+/* SHM_SCRATCH offsets */
+#define B43_SHM_SC_MINCONT              0x0003  /* Minimum contention window */
+#define B43_SHM_SC_MAXCONT              0x0004  /* Maximum contention window */
+#define B43_SHM_SC_CURCONT              0x0005  /* Current contention window */
+#define B43_SHM_SC_SRLIMIT              0x0006  /* Short retry count limit */
+#define B43_SHM_SC_LRLIMIT              0x0007  /* Long retry count limit */
+#define B43_SHM_SC_DTIMC                0x0008  /* Current DTIM count */
+#define B43_SHM_SC_BTL0LEN              0x0015  /* Beacon 0 template length */
+#define B43_SHM_SC_BTL1LEN              0x0016  /* Beacon 1 template length */
+#define B43_SHM_SC_SCFB                 0x0017  /* Short frame transmit count threshold for rate fallback */
+#define B43_SHM_SC_LCFB                 0x0018  /* Long frame transmit count threshold for rate fallback */
+
+/* Hardware Radio Enable masks */
+#define B43_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16)
+#define B43_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4)
+
+/* HostFlags. See b43_hf_read/write() */
+#define B43_HF_ANTDIVHELP               0x00000001      /* ucode antenna div helper */
+#define B43_HF_SYMW                     0x00000002      /* G-PHY SYM workaround */
+#define B43_HF_RXPULLW                  0x00000004      /* RX pullup workaround */
+#define B43_HF_CCKBOOST                 0x00000008      /* 4dB CCK power boost (exclusive with OFDM boost) */
+#define B43_HF_BTCOEX                   0x00000010      /* Bluetooth coexistance */
+#define B43_HF_GDCW                     0x00000020      /* G-PHY DV canceller filter bw workaround */
+#define B43_HF_OFDMPABOOST              0x00000040      /* Enable PA gain boost for OFDM */
+#define B43_HF_ACPR                     0x00000080      /* Disable for Japan, channel 14 */
+#define B43_HF_EDCF                     0x00000100      /* on if WME and MAC suspended */
+#define B43_HF_TSSIRPSMW                0x00000200      /* TSSI reset PSM ucode workaround */
+#define B43_HF_DSCRQ                    0x00000400      /* Disable slow clock request in ucode */
+#define B43_HF_ACIW                     0x00000800      /* ACI workaround: shift bits by 2 on PHY CRS */
+#define B43_HF_2060W                    0x00001000      /* 2060 radio workaround */
+#define B43_HF_RADARW                   0x00002000      /* Radar workaround */
+#define B43_HF_USEDEFKEYS               0x00004000      /* Enable use of default keys */
+#define B43_HF_BT4PRIOCOEX              0x00010000      /* Bluetooth 2-priority coexistance */
+#define B43_HF_FWKUP                    0x00020000      /* Fast wake-up ucode */
+#define B43_HF_VCORECALC                0x00040000      /* Force VCO recalculation when powering up synthpu */
+#define B43_HF_PCISCW                   0x00080000      /* PCI slow clock workaround */
+#define B43_HF_4318TSSI                 0x00200000      /* 4318 TSSI */
+#define B43_HF_FBCMCFIFO                0x00400000      /* Flush bcast/mcast FIFO immediately */
+#define B43_HF_HWPCTL                   0x00800000      /* Enable hardwarre power control */
+#define B43_HF_BTCOEXALT                0x01000000      /* Bluetooth coexistance in alternate pins */
+#define B43_HF_TXBTCHECK                0x02000000      /* Bluetooth check during transmission */
+#define B43_HF_SKCFPUP                  0x04000000      /* Skip CFP update */
+
+/* MacFilter offsets. */
+#define B43_MACFILTER_SELF              0x0000
+#define B43_MACFILTER_BSSID             0x0003
+
+/* PowerControl */
+#define B43_PCTL_IN                     0xB0
+#define B43_PCTL_OUT                    0xB4
+#define B43_PCTL_OUTENABLE              0xB8
+#define B43_PCTL_XTAL_POWERUP           0x40
+#define B43_PCTL_PLL_POWERDOWN          0x80
+
+/* PowerControl Clock Modes */
+#define B43_PCTL_CLK_FAST               0x00
+#define B43_PCTL_CLK_SLOW               0x01
+#define B43_PCTL_CLK_DYNAMIC            0x02
+
+#define B43_PCTL_FORCE_SLOW             0x0800
+#define B43_PCTL_FORCE_PLL              0x1000
+#define B43_PCTL_DYN_XTAL               0x2000
+
+/* PHYVersioning */
+#define B43_PHYTYPE_A                   0x00
+#define B43_PHYTYPE_B                   0x01
+#define B43_PHYTYPE_G                   0x02
+
+/* PHYRegisters */
+#define B43_PHY_ILT_A_CTRL              0x0072
+#define B43_PHY_ILT_A_DATA1             0x0073
+#define B43_PHY_ILT_A_DATA2             0x0074
+#define B43_PHY_G_LO_CONTROL            0x0810
+#define B43_PHY_ILT_G_CTRL              0x0472
+#define B43_PHY_ILT_G_DATA1             0x0473
+#define B43_PHY_ILT_G_DATA2             0x0474
+#define B43_PHY_A_PCTL                  0x007B
+#define B43_PHY_G_PCTL                  0x0029
+#define B43_PHY_A_CRS                   0x0029
+#define B43_PHY_RADIO_BITFIELD          0x0401
+#define B43_PHY_G_CRS                   0x0429
+#define B43_PHY_NRSSILT_CTRL            0x0803
+#define B43_PHY_NRSSILT_DATA            0x0804
+
+/* RadioRegisters */
+#define B43_RADIOCTL_ID                 0x01
+
+/* MAC Control bitfield */
+#define B43_MACCTL_ENABLED              0x00000001      /* MAC Enabled */
+#define B43_MACCTL_PSM_RUN              0x00000002      /* Run Microcode */
+#define B43_MACCTL_PSM_JMP0             0x00000004      /* Microcode jump to 0 */
+#define B43_MACCTL_SHM_ENABLED          0x00000100      /* SHM Enabled */
+#define B43_MACCTL_SHM_UPPER            0x00000200      /* SHM Upper */
+#define B43_MACCTL_IHR_ENABLED          0x00000400      /* IHR Region Enabled */
+#define B43_MACCTL_PSM_DBG              0x00002000      /* Microcode debugging enabled */
+#define B43_MACCTL_GPOUTSMSK            0x0000C000      /* GPOUT Select Mask */
+#define B43_MACCTL_BE                   0x00010000      /* Big Endian mode */
+#define B43_MACCTL_INFRA                0x00020000      /* Infrastructure mode */
+#define B43_MACCTL_AP                   0x00040000      /* AccessPoint mode */
+#define B43_MACCTL_RADIOLOCK            0x00080000      /* Radio lock */
+#define B43_MACCTL_BEACPROMISC          0x00100000      /* Beacon Promiscuous */
+#define B43_MACCTL_KEEP_BADPLCP         0x00200000      /* Keep frames with bad PLCP */
+#define B43_MACCTL_KEEP_CTL             0x00400000      /* Keep control frames */
+#define B43_MACCTL_KEEP_BAD             0x00800000      /* Keep bad frames (FCS) */
+#define B43_MACCTL_PROMISC              0x01000000      /* Promiscuous mode */
+#define B43_MACCTL_HWPS                 0x02000000      /* Hardware Power Saving */
+#define B43_MACCTL_AWAKE                0x04000000      /* Device is awake */
+#define B43_MACCTL_CLOSEDNET            0x08000000      /* Closed net (no SSID bcast) */
+#define B43_MACCTL_TBTTHOLD             0x10000000      /* TBTT Hold */
+#define B43_MACCTL_DISCTXSTAT           0x20000000      /* Discard TX status */
+#define B43_MACCTL_DISCPMQ              0x40000000      /* Discard Power Management Queue */
+#define B43_MACCTL_GMODE                0x80000000      /* G Mode */
+
+/* 802.11 core specific TM State Low flags */
+#define B43_TMSLOW_GMODE                0x20000000      /* G Mode Enable */
+#define B43_TMSLOW_PLLREFSEL            0x00200000      /* PLL Frequency Reference Select */
+#define B43_TMSLOW_MACPHYCLKEN          0x00100000      /* MAC PHY Clock Control Enable (rev >= 5) */
+#define B43_TMSLOW_PHYRESET             0x00080000      /* PHY Reset */
+#define B43_TMSLOW_PHYCLKEN             0x00040000      /* PHY Clock Enable */
+
+/* 802.11 core specific TM State High flags */
+#define B43_TMSHIGH_FCLOCK              0x00040000      /* Fast Clock Available (rev >= 5) */
+#define B43_TMSHIGH_APHY                0x00020000      /* A-PHY available (rev >= 5) */
+#define B43_TMSHIGH_GPHY                0x00010000      /* G-PHY available (rev >= 5) */
+
+/* Generic-Interrupt reasons. */
+#define B43_IRQ_MAC_SUSPENDED           0x00000001
+#define B43_IRQ_BEACON                  0x00000002
+#define B43_IRQ_TBTT_INDI               0x00000004
+#define B43_IRQ_BEACON_TX_OK            0x00000008
+#define B43_IRQ_BEACON_CANCEL           0x00000010
+#define B43_IRQ_ATIM_END                0x00000020
+#define B43_IRQ_PMQ                     0x00000040
+#define B43_IRQ_PIO_WORKAROUND          0x00000100
+#define B43_IRQ_MAC_TXERR               0x00000200
+#define B43_IRQ_PHY_TXERR               0x00000800
+#define B43_IRQ_PMEVENT                 0x00001000
+#define B43_IRQ_TIMER0                  0x00002000
+#define B43_IRQ_TIMER1                  0x00004000
+#define B43_IRQ_DMA                     0x00008000
+#define B43_IRQ_TXFIFO_FLUSH_OK         0x00010000
+#define B43_IRQ_CCA_MEASURE_OK          0x00020000
+#define B43_IRQ_NOISESAMPLE_OK          0x00040000
+#define B43_IRQ_UCODE_DEBUG             0x08000000
+#define B43_IRQ_RFKILL                  0x10000000
+#define B43_IRQ_TX_OK                   0x20000000
+#define B43_IRQ_PHY_G_CHANGED           0x40000000
+#define B43_IRQ_TIMEOUT                 0x80000000
+
+#define B43_IRQ_ALL                     0xFFFFFFFF
+#define B43_IRQ_MASKTEMPLATE            (B43_IRQ_MAC_SUSPENDED | \
+                                         B43_IRQ_BEACON | \
+                                         B43_IRQ_TBTT_INDI | \
+                                         B43_IRQ_ATIM_END | \
+                                         B43_IRQ_PMQ | \
+                                         B43_IRQ_MAC_TXERR | \
+                                         B43_IRQ_PHY_TXERR | \
+                                         B43_IRQ_DMA | \
+                                         B43_IRQ_TXFIFO_FLUSH_OK | \
+                                         B43_IRQ_NOISESAMPLE_OK | \
+                                         B43_IRQ_UCODE_DEBUG | \
+                                         B43_IRQ_RFKILL | \
+                                         B43_IRQ_TX_OK)
+
+/* Device specific rate values.
+ * The actual values defined here are (rate_in_mbps * 2).
+ * Some code depends on this. Don't change it. */
+#define B43_CCK_RATE_1MB                0x02
+#define B43_CCK_RATE_2MB                0x04
+#define B43_CCK_RATE_5MB                0x0B
+#define B43_CCK_RATE_11MB               0x16
+#define B43_OFDM_RATE_6MB               0x0C
+#define B43_OFDM_RATE_9MB               0x12
+#define B43_OFDM_RATE_12MB              0x18
+#define B43_OFDM_RATE_18MB              0x24
+#define B43_OFDM_RATE_24MB              0x30
+#define B43_OFDM_RATE_36MB              0x48
+#define B43_OFDM_RATE_48MB              0x60
+#define B43_OFDM_RATE_54MB              0x6C
+/* Convert a b43 rate value to a rate in 100kbps */
+#define B43_RATE_TO_BASE100KBPS(rate)   (((rate) * 10) / 2)
+
+#define B43_DEFAULT_SHORT_RETRY_LIMIT   7
+#define B43_DEFAULT_LONG_RETRY_LIMIT    4
+
+/* Max size of a security key */
+#define B43_SEC_KEYSIZE                 16
+/* Security algorithms. */
+enum {
+        B43_SEC_ALGO_NONE = 0,  /* unencrypted, as of TX header. */
+        B43_SEC_ALGO_WEP40,
+        B43_SEC_ALGO_TKIP,
+        B43_SEC_ALGO_AES,
+        B43_SEC_ALGO_WEP104,
+        B43_SEC_ALGO_AES_LEGACY,
+};
+
+struct b43_dmaring;
+struct b43_pioqueue;
+
+/* The firmware file header */
+#define B43_FW_TYPE_UCODE       'u'
+#define B43_FW_TYPE_PCM         'p'
+#define B43_FW_TYPE_IV          'i'
+struct b43_fw_header {
+        /* File type */
+        u8 type;
+        /* File format version */
+        u8 ver;
+        u8 __padding[2];
+        /* Size of the data. For ucode and PCM this is in bytes.
+         * For IV this is number-of-ivs. */
+        __be32 size;
+} __attribute__((__packed__));
+
+/* Initial Value file format */
+#define B43_IV_OFFSET_MASK      0x7FFF
+#define B43_IV_32BIT            0x8000
+struct b43_iv {
+        __be16 offset_size;
+        union {
+                __be16 d16;
+                __be32 d32;
+        } data __attribute__((__packed__));
+} __attribute__((__packed__));
+
+
+#define B43_PHYMODE(phytype)            (1 << (phytype))
+#define B43_PHYMODE_A                   B43_PHYMODE(B43_PHYTYPE_A)
+#define B43_PHYMODE_B                   B43_PHYMODE(B43_PHYTYPE_B)
+#define B43_PHYMODE_G                   B43_PHYMODE(B43_PHYTYPE_G)
+
+struct b43_phy {
+        /* Possible PHYMODEs on this PHY */
+        u8 possible_phymodes;
+        /* GMODE bit enabled? */
+        bool gmode;
+        /* Possible ieee80211 subsystem hwmodes for this PHY.
+         * Which mode is selected, depends on thr GMODE enabled bit */
+#define B43_MAX_PHYHWMODES      2
+        struct ieee80211_hw_mode hwmodes[B43_MAX_PHYHWMODES];
+
+        /* Analog Type */
+        u8 analog;
+        /* B43_PHYTYPE_ */
+        u8 type;
+        /* PHY revision number. */
+        u8 rev;
+
+        /* Radio versioning */
+        u16 radio_manuf;        /* Radio manufacturer */
+        u16 radio_ver;          /* Radio version */
+        u8 radio_rev;           /* Radio revision */
+
+        bool radio_on;          /* Radio switched on/off */
+        bool locked;            /* Only used in b43_phy_{un}lock() */
+        bool dyn_tssi_tbl;      /* tssi2dbm is kmalloc()ed. */
+
+        /* ACI (adjacent channel interference) flags. */
+        bool aci_enable;
+        bool aci_wlan_automatic;
+        bool aci_hw_rssi;
+
+        u16 minlowsig[2];
+        u16 minlowsigpos[2];
+
+        /* TSSI to dBm table in use */
+        const s8 *tssi2dbm;
+        /* Target idle TSSI */
+        int tgt_idle_tssi;
+        /* Current idle TSSI */
+        int cur_idle_tssi;
+
+        /* LocalOscillator control values. */
+        struct b43_txpower_lo_control *lo_control;
+        /* Values from b43_calc_loopback_gain() */
+        s16 max_lb_gain;        /* Maximum Loopback gain in hdB */
+        s16 trsw_rx_gain;       /* TRSW RX gain in hdB */
+        s16 lna_lod_gain;       /* LNA lod */
+        s16 lna_gain;           /* LNA */
+        s16 pga_gain;           /* PGA */
+
+        /* PHY lock for core.rev < 3
+         * This lock is only used by b43_phy_{un}lock()
+         */
+        spinlock_t lock;
+
+        /* Desired TX power level (in dBm).
+         * This is set by the user and adjusted in b43_phy_xmitpower(). */
+        u8 power_level;
+        /* A-PHY TX Power control value. */
+        u16 txpwr_offset;
+
+        /* Current TX power level attenuation control values */
+        struct b43_bbatt bbatt;
+        struct b43_rfatt rfatt;
+        u8 tx_control;          /* B43_TXCTL_XXX */
+#ifdef CONFIG_B43_DEBUG
+        bool manual_txpower_control;    /* Manual TX-power control enabled? */
+#endif
+        /* Hardware Power Control enabled? */
+        bool hardware_power_control;
+
+        /* Current Interference Mitigation mode */
+        int interfmode;
+        /* Stack of saved values from the Interference Mitigation code.
+         * Each value in the stack is layed out as follows:
+         * bit 0-11:  offset
+         * bit 12-15: register ID
+         * bit 16-32: value
+         * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT
+         */
+#define B43_INTERFSTACK_SIZE    26
+        u32 interfstack[B43_INTERFSTACK_SIZE];  //FIXME: use a data structure
+
+        /* Saved values from the NRSSI Slope calculation */
+        s16 nrssi[2];
+        s32 nrssislope;
+        /* In memory nrssi lookup table. */
+        s8 nrssi_lt[64];
+
+        /* current channel */
+        u8 channel;
+
+        u16 lofcal;
+
+        u16 initval;            //FIXME rename?
+};
+
+/* Data structures for DMA transmission, per 80211 core. */
+struct b43_dma {
+        struct b43_dmaring *tx_ring0;
+        struct b43_dmaring *tx_ring1;
+        struct b43_dmaring *tx_ring2;
+        struct b43_dmaring *tx_ring3;
+        struct b43_dmaring *tx_ring4;
+        struct b43_dmaring *tx_ring5;
+
+        struct b43_dmaring *rx_ring0;
+        struct b43_dmaring *rx_ring3;   /* only available on core.rev < 5 */
+};
+
+/* Data structures for PIO transmission, per 80211 core. */
+struct b43_pio {
+        struct b43_pioqueue *queue0;
+        struct b43_pioqueue *queue1;
+        struct b43_pioqueue *queue2;
+        struct b43_pioqueue *queue3;
+};
+
+/* Context information for a noise calculation (Link Quality). */
+struct b43_noise_calculation {
+        u8 channel_at_start;
+        bool calculation_running;
+        u8 nr_samples;
+        s8 samples[8][4];
+};
+
+struct b43_stats {
+        u8 link_noise;
+        /* Store the last TX/RX times here for updating the leds. */
+        unsigned long last_tx;
+        unsigned long last_rx;
+};
+
+struct b43_key {
+        /* If keyconf is NULL, this key is disabled.
+         * keyconf is a cookie. Don't derefenrence it outside of the set_key
+         * path, because b43 doesn't own it. */
+        struct ieee80211_key_conf *keyconf;
+        u8 algorithm;
+};
+
+struct b43_wldev;
+
+/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
+struct b43_wl {
+        /* Pointer to the active wireless device on this chip */
+        struct b43_wldev *current_dev;
+        /* Pointer to the ieee80211 hardware data structure */
+        struct ieee80211_hw *hw;
+
+        spinlock_t irq_lock;
+        struct mutex mutex;
+        spinlock_t leds_lock;
+
+        /* We can only have one operating interface (802.11 core)
+         * at a time. General information about this interface follows.
+         */
+
+        /* Opaque ID of the operating interface (!= monitor
+         * interface) from the ieee80211 subsystem.
+         * Do not modify.
+         */
+        int if_id;
+        /* The MAC address of the operating interface. */
+        u8 mac_addr[ETH_ALEN];
+        /* Current BSSID */
+        u8 bssid[ETH_ALEN];
+        /* Interface type. (IEEE80211_IF_TYPE_XXX) */
+        int if_type;
+        /* Counter of active monitor interfaces. */
+        int monitor;
+        /* Is the card operating in AP, STA or IBSS mode? */
+        bool operating;
+        /* Promisc mode active?
+         * Note that (monitor != 0) implies promisc.
+         */
+        bool promisc;
+        /* Stats about the wireless interface */
+        struct ieee80211_low_level_stats ieee_stats;
+
+        struct hwrng rng;
+        u8 rng_initialized;
+        char rng_name[30 + 1];
+
+        /* List of all wireless devices on this chip */
+        struct list_head devlist;
+        u8 nr_devs;
+};
+
+/* Pointers to the firmware data and meta information about it. */
+struct b43_firmware {
+        /* Microcode */
+        const struct firmware *ucode;
+        /* PCM code */
+        const struct firmware *pcm;
+        /* Initial MMIO values for the firmware */
+        const struct firmware *initvals;
+        /* Initial MMIO values for the firmware, band-specific */
+        const struct firmware *initvals_band;
+        /* Firmware revision */
+        u16 rev;
+        /* Firmware patchlevel */
+        u16 patch;
+};
+
+/* Device (802.11 core) initialization status. */
+enum {
+        B43_STAT_UNINIT = 0,    /* Uninitialized. */
+        B43_STAT_INITIALIZED = 1,       /* Initialized, but not started, yet. */
+        B43_STAT_STARTED = 2,   /* Up and running. */
+};
+#define b43_status(wldev)               atomic_read(&(wldev)->__init_status)
+#define b43_set_status(wldev, stat)     do {                    \
+                atomic_set(&(wldev)->__init_status, (stat));    \
+                smp_wmb();                                      \
+                                        } while (0)
+
+/* XXX---   HOW LOCKING WORKS IN B43   ---XXX
+ *
+ * You should always acquire both, wl->mutex and wl->irq_lock unless:
+ * - You don't need to acquire wl->irq_lock, if the interface is stopped.
+ * - You don't need to acquire wl->mutex in the IRQ handler, IRQ tasklet
+ *   and packet TX path (and _ONLY_ there.)
+ */
+
+/* Data structure for one wireless device (802.11 core) */
+struct b43_wldev {
+        struct ssb_device *dev;
+        struct b43_wl *wl;
+
+        /* The device initialization status.
+         * Use b43_status() to query. */
+        atomic_t __init_status;
+        /* Saved init status for handling suspend. */
+        int suspend_init_status;
+
+        bool __using_pio;       /* Internal, use b43_using_pio(). */
+        bool bad_frames_preempt;        /* Use "Bad Frames Preemption" (default off) */
+        bool reg124_set_0x4;    /* Some variable to keep track of IRQ stuff. */
+        bool short_preamble;    /* TRUE, if short preamble is enabled. */
+        bool short_slot;        /* TRUE, if short slot timing is enabled. */
+        bool radio_hw_enable;   /* saved state of radio hardware enabled state */
+
+        /* PHY/Radio device. */
+        struct b43_phy phy;
+        union {
+                /* DMA engines. */
+                struct b43_dma dma;
+                /* PIO engines. */
+                struct b43_pio pio;
+        };
+
+        /* Various statistics about the physical device. */
+        struct b43_stats stats;
+
+#define B43_NR_LEDS             4
+        struct b43_led leds[B43_NR_LEDS];
+
+        /* Reason code of the last interrupt. */
+        u32 irq_reason;
+        u32 dma_reason[6];
+        /* saved irq enable/disable state bitfield. */
+        u32 irq_savedstate;
+        /* Link Quality calculation context. */
+        struct b43_noise_calculation noisecalc;
+        /* if > 0 MAC is suspended. if == 0 MAC is enabled. */
+        int mac_suspended;
+
+        /* Interrupt Service Routine tasklet (bottom-half) */
+        struct tasklet_struct isr_tasklet;
+
+        /* Periodic tasks */
+        struct delayed_work periodic_work;
+        unsigned int periodic_state;
+
+        struct work_struct restart_work;
+
+        /* encryption/decryption */
+        u16 ktp;                /* Key table pointer */
+        u8 max_nr_keys;
+        struct b43_key key[58];
+
+        /* Cached beacon template while uploading the template. */
+        struct sk_buff *cached_beacon;
+
+        /* Firmware data */
+        struct b43_firmware fw;
+
+        /* Devicelist in struct b43_wl (all 802.11 cores) */
+        struct list_head list;
+
+        /* Debugging stuff follows. */
+#ifdef CONFIG_B43_DEBUG
+        struct b43_dfsentry *dfsentry;
+#endif
+};
+
+static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw)
+{
+        return hw->priv;
+}
+
+/* Helper function, which returns a boolean.
+ * TRUE, if PIO is used; FALSE, if DMA is used.
+ */
+#if defined(CONFIG_B43_DMA) && defined(CONFIG_B43_PIO)
+static inline int b43_using_pio(struct b43_wldev *dev)
+{
+        return dev->__using_pio;
+}
+#elif defined(CONFIG_B43_DMA)
+static inline int b43_using_pio(struct b43_wldev *dev)
+{
+        return 0;
+}
+#elif defined(CONFIG_B43_PIO)
+static inline int b43_using_pio(struct b43_wldev *dev)
+{
+        return 1;
+}
+#else
+# error "Using neither DMA nor PIO? Confused..."
+#endif
+
+static inline struct b43_wldev *dev_to_b43_wldev(struct device *dev)
+{
+        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+        return ssb_get_drvdata(ssb_dev);
+}
+
+/* Is the device operating in a specified mode (IEEE80211_IF_TYPE_XXX). */
+static inline int b43_is_mode(struct b43_wl *wl, int type)
+{
+        if (type == IEEE80211_IF_TYPE_MNTR)
+                return !!(wl->monitor);
+        return (wl->operating && wl->if_type == type);
+}
+
+static inline u16 b43_read16(struct b43_wldev *dev, u16 offset)
+{
+        return ssb_read16(dev->dev, offset);
+}
+
+static inline void b43_write16(struct b43_wldev *dev, u16 offset, u16 value)
+{
+        ssb_write16(dev->dev, offset, value);
+}
+
+static inline u32 b43_read32(struct b43_wldev *dev, u16 offset)
+{
+        return ssb_read32(dev->dev, offset);
+}
+
+static inline void b43_write32(struct b43_wldev *dev, u16 offset, u32 value)
+{
+        ssb_write32(dev->dev, offset, value);
+}
+
+/* Message printing */
+void b43info(struct b43_wl *wl, const char *fmt, ...)
+    __attribute__ ((format(printf, 2, 3)));
+void b43err(struct b43_wl *wl, const char *fmt, ...)
+    __attribute__ ((format(printf, 2, 3)));
+void b43warn(struct b43_wl *wl, const char *fmt, ...)
+    __attribute__ ((format(printf, 2, 3)));
+#if B43_DEBUG
+void b43dbg(struct b43_wl *wl, const char *fmt, ...)
+    __attribute__ ((format(printf, 2, 3)));
+#else /* DEBUG */
+# define b43dbg(wl, fmt...) do { /* nothing */ } while (0)
+#endif /* DEBUG */
+
+/* A WARN_ON variant that vanishes when b43 debugging is disabled.
+ * This _also_ evaluates the arg with debugging disabled. */
+#if B43_DEBUG
+# define B43_WARN_ON(x) WARN_ON(x)
+#else
+static inline bool __b43_warn_on_dummy(bool x) { return x; }
+# define B43_WARN_ON(x) __b43_warn_on_dummy(unlikely(!!(x)))
+#endif
+
+/** Limit a value between two limits */
+#ifdef limit_value
+# undef limit_value
+#endif
+#define limit_value(value, min, max)  \
+        ({                                              \
+                typeof(value) __value = (value);        \
+                typeof(value) __min = (min);            \
+                typeof(value) __max = (max);            \
+                if (__value < __min)                    \
+                        __value = __min;                \
+                else if (__value > __max)               \
+                        __value = __max;                \
+                __value;                                \
+        })
+
+/* Convert an integer to a Q5.2 value */
+#define INT_TO_Q52(i)   ((i) << 2)
+/* Convert a Q5.2 value to an integer (precision loss!) */
+#define Q52_TO_INT(q52) ((q52) >> 2)
+/* Macros for printing a value in Q5.2 format */
+#define Q52_FMT         "%u.%u"
+#define Q52_ARG(q52)    Q52_TO_INT(q52), ((((q52) & 0x3) * 100) / 4)
+
+#endif /* B43_H_ */