1 files changed, 2589 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
new file mode 100644
index 000000000000..7070d1543cdc
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -0,0 +1,2589 @@
+/*
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*
+ * Register values for Atheros 5210/5211/5212 cards from OpenBSD's ar5k
+ * maintained by Reyk Floeter
+ *
+ * I tried to document those registers by looking at ar5k code, some
+ * 802.11 (802.11e mostly) papers and by reading various public available
+ * Atheros presentations and papers like these:
+ *
+ * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf
+ *        http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
+ *
+ * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
+ *
+ * This file also contains register values found on a memory dump of
+ * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal
+ * released by Atheros and on various debug messages found on the net.
+ */
+
+
+
+/*====MAC DMA REGISTERS====*/
+
+/*
+ * AR5210-Specific TXDP registers
+ * 5210 has only 2 transmit queues so no DCU/QCU, just
+ * 2 transmit descriptor pointers...
+ */
+#define AR5K_NOQCU_TXDP0        0x0000          /* Queue 0 - data */
+#define AR5K_NOQCU_TXDP1        0x0004          /* Queue 1 - beacons */
+
+/*
+ * Mac Control Register
+ */
+#define AR5K_CR         0x0008                  /* Register Address */
+#define AR5K_CR_TXE0    0x00000001      /* TX Enable for queue 0 on 5210 */
+#define AR5K_CR_TXE1    0x00000002      /* TX Enable for queue 1 on 5210 */
+#define AR5K_CR_RXE     0x00000004      /* RX Enable */
+#define AR5K_CR_TXD0    0x00000008      /* TX Disable for queue 0 on 5210 */
+#define AR5K_CR_TXD1    0x00000010      /* TX Disable for queue 1 on 5210 */
+#define AR5K_CR_RXD     0x00000020      /* RX Disable */
+#define AR5K_CR_SWI     0x00000040      /* Software Interrupt */
+
+/*
+ * RX Descriptor Pointer register
+ */
+#define AR5K_RXDP       0x000c
+
+/*
+ * Configuration and status register
+ */
+#define AR5K_CFG                0x0014                  /* Register Address */
+#define AR5K_CFG_SWTD           0x00000001      /* Byte-swap TX descriptor (for big endian archs) */
+#define AR5K_CFG_SWTB           0x00000002      /* Byte-swap TX buffer */
+#define AR5K_CFG_SWRD           0x00000004      /* Byte-swap RX descriptor */
+#define AR5K_CFG_SWRB           0x00000008      /* Byte-swap RX buffer */
+#define AR5K_CFG_SWRG           0x00000010      /* Byte-swap Register access */
+#define AR5K_CFG_IBSS           0x00000020      /* 0-BSS, 1-IBSS [5211+] */
+#define AR5K_CFG_PHY_OK         0x00000100      /* [5211+] */
+#define AR5K_CFG_EEBS           0x00000200      /* EEPROM is busy */
+#define AR5K_CFG_CLKGD          0x00000400      /* Clock gated (Disable dynamic clock) */
+#define AR5K_CFG_TXCNT          0x00007800      /* Tx frame count (?) [5210] */
+#define AR5K_CFG_TXCNT_S        11
+#define AR5K_CFG_TXFSTAT        0x00008000      /* Tx frame status (?) [5210] */
+#define AR5K_CFG_TXFSTRT        0x00010000      /* [5210] */
+#define AR5K_CFG_PCI_THRES      0x00060000      /* PCI Master req q threshold [5211+] */
+#define AR5K_CFG_PCI_THRES_S    17
+
+/*
+ * Interrupt enable register
+ */
+#define AR5K_IER                0x0024          /* Register Address */
+#define AR5K_IER_DISABLE        0x00000000      /* Disable card interrupts */
+#define AR5K_IER_ENABLE         0x00000001      /* Enable card interrupts */
+
+
+/*
+ * 0x0028 is Beacon Control Register on 5210
+ * and first RTS duration register on 5211
+ */
+
+/*
+ * Beacon control register [5210]
+ */
+#define AR5K_BCR                0x0028          /* Register Address */
+#define AR5K_BCR_AP             0x00000000      /* AP mode */
+#define AR5K_BCR_ADHOC          0x00000001      /* Ad-Hoc mode */
+#define AR5K_BCR_BDMAE          0x00000002      /* DMA enable */
+#define AR5K_BCR_TQ1FV          0x00000004      /* Use Queue1 for CAB traffic */
+#define AR5K_BCR_TQ1V           0x00000008      /* Use Queue1 for Beacon traffic */
+#define AR5K_BCR_BCGET          0x00000010
+
+/*
+ * First RTS duration register [5211]
+ */
+#define AR5K_RTSD0              0x0028          /* Register Address */
+#define AR5K_RTSD0_6            0x000000ff      /* 6Mb RTS duration mask (?) */
+#define AR5K_RTSD0_6_S          0               /* 6Mb RTS duration shift (?) */
+#define AR5K_RTSD0_9            0x0000ff00      /* 9Mb*/
+#define AR5K_RTSD0_9_S          8
+#define AR5K_RTSD0_12           0x00ff0000      /* 12Mb*/
+#define AR5K_RTSD0_12_S         16
+#define AR5K_RTSD0_18           0xff000000      /* 16Mb*/
+#define AR5K_RTSD0_18_S         24
+
+
+/*
+ * 0x002c is Beacon Status Register on 5210
+ * and second RTS duration register on 5211
+ */
+
+/*
+ * Beacon status register [5210]
+ *
+ * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR
+ * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning
+ * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR).
+ * So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i
+ * renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what
+ * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR.
+ */
+#define AR5K_BSR                0x002c                  /* Register Address */
+#define AR5K_BSR_BDLYSW         0x00000001      /* SW Beacon delay (?) */
+#define AR5K_BSR_BDLYDMA        0x00000002      /* DMA Beacon delay (?) */
+#define AR5K_BSR_TXQ1F          0x00000004      /* Beacon queue (1) finished */
+#define AR5K_BSR_ATIMDLY        0x00000008      /* ATIM delay (?) */
+#define AR5K_BSR_SNPADHOC       0x00000100      /* Ad-hoc mode set (?) */
+#define AR5K_BSR_SNPBDMAE       0x00000200      /* Beacon DMA enabled (?) */
+#define AR5K_BSR_SNPTQ1FV       0x00000400      /* Queue1 is used for CAB traffic (?) */
+#define AR5K_BSR_SNPTQ1V        0x00000800      /* Queue1 is used for Beacon traffic (?) */
+#define AR5K_BSR_SNAPSHOTSVALID 0x00001000      /* BCR snapshots are valid (?) */
+#define AR5K_BSR_SWBA_CNT       0x00ff0000
+
+/*
+ * Second RTS duration register [5211]
+ */
+#define AR5K_RTSD1              0x002c                  /* Register Address */
+#define AR5K_RTSD1_24           0x000000ff      /* 24Mb */
+#define AR5K_RTSD1_24_S         0
+#define AR5K_RTSD1_36           0x0000ff00      /* 36Mb */
+#define AR5K_RTSD1_36_S         8
+#define AR5K_RTSD1_48           0x00ff0000      /* 48Mb */
+#define AR5K_RTSD1_48_S         16
+#define AR5K_RTSD1_54           0xff000000      /* 54Mb */
+#define AR5K_RTSD1_54_S         24
+
+
+/*
+ * Transmit configuration register
+ */
+#define AR5K_TXCFG                      0x0030                  /* Register Address */
+#define AR5K_TXCFG_SDMAMR               0x00000007      /* DMA size (read) */
+#define AR5K_TXCFG_SDMAMR_S             0
+#define AR5K_TXCFG_B_MODE               0x00000008      /* Set b mode for 5111 (enable 2111) */
+#define AR5K_TXCFG_TXFSTP               0x00000008      /* TX DMA full Stop [5210] */
+#define AR5K_TXCFG_TXFULL               0x000003f0      /* TX Triger level mask */
+#define AR5K_TXCFG_TXFULL_S             4
+#define AR5K_TXCFG_TXFULL_0B            0x00000000
+#define AR5K_TXCFG_TXFULL_64B           0x00000010
+#define AR5K_TXCFG_TXFULL_128B          0x00000020
+#define AR5K_TXCFG_TXFULL_192B          0x00000030
+#define AR5K_TXCFG_TXFULL_256B          0x00000040
+#define AR5K_TXCFG_TXCONT_EN            0x00000080
+#define AR5K_TXCFG_DMASIZE              0x00000100      /* Flag for passing DMA size [5210] */
+#define AR5K_TXCFG_JUMBO_DESC_EN        0x00000400      /* Enable jumbo tx descriptors [5211+] */
+#define AR5K_TXCFG_ADHOC_BCN_ATIM       0x00000800      /* Adhoc Beacon ATIM Policy */
+#define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS  0x00001000      /* Disable ATIM window defer [5211+] */
+#define AR5K_TXCFG_RTSRND               0x00001000      /* [5211+] */
+#define AR5K_TXCFG_FRMPAD_DIS           0x00002000      /* [5211+] */
+#define AR5K_TXCFG_RDY_CBR_DIS          0x00004000      /* Ready time CBR disable [5211+] */
+#define AR5K_TXCFG_JUMBO_FRM_MODE       0x00008000      /* Jumbo frame mode [5211+] */
+#define AR5K_TXCFG_DCU_DBL_BUF_DIS      0x00008000      /* Disable double buffering on DCU */
+#define AR5K_TXCFG_DCU_CACHING_DIS      0x00010000      /* Disable DCU caching */
+
+/*
+ * Receive configuration register
+ */
+#define AR5K_RXCFG              0x0034                  /* Register Address */
+#define AR5K_RXCFG_SDMAMW       0x00000007      /* DMA size (write) */
+#define AR5K_RXCFG_SDMAMW_S     0
+#define AR5K_RXCFG_ZLFDMA       0x00000008      /* Enable Zero-length frame DMA */
+#define AR5K_RXCFG_DEF_ANTENNA  0x00000010      /* Default antenna (?) */
+#define AR5K_RXCFG_JUMBO_RXE    0x00000020      /* Enable jumbo rx descriptors [5211+] */
+#define AR5K_RXCFG_JUMBO_WRAP   0x00000040      /* Wrap jumbo frames [5211+] */
+#define AR5K_RXCFG_SLE_ENTRY    0x00000080      /* Sleep entry policy */
+
+/*
+ * Receive jumbo descriptor last address register
+ * Only found in 5211 (?)
+ */
+#define AR5K_RXJLA              0x0038
+
+/*
+ * MIB control register
+ */
+#define AR5K_MIBC               0x0040                  /* Register Address */
+#define AR5K_MIBC_COW           0x00000001      /* Warn test indicator */
+#define AR5K_MIBC_FMC           0x00000002      /* Freeze MIB Counters  */
+#define AR5K_MIBC_CMC           0x00000004      /* Clean MIB Counters  */
+#define AR5K_MIBC_MCS           0x00000008      /* MIB counter strobe */
+
+/*
+ * Timeout prescale register
+ */
+#define AR5K_TOPS               0x0044
+#define AR5K_TOPS_M             0x0000ffff
+
+/*
+ * Receive timeout register (no frame received)
+ */
+#define AR5K_RXNOFRM            0x0048
+#define AR5K_RXNOFRM_M          0x000003ff
+
+/*
+ * Transmit timeout register (no frame sent)
+ */
+#define AR5K_TXNOFRM            0x004c
+#define AR5K_TXNOFRM_M          0x000003ff
+#define AR5K_TXNOFRM_QCU        0x000ffc00
+#define AR5K_TXNOFRM_QCU_S      10
+
+/*
+ * Receive frame gap timeout register
+ */
+#define AR5K_RPGTO              0x0050
+#define AR5K_RPGTO_M            0x000003ff
+
+/*
+ * Receive frame count limit register
+ */
+#define AR5K_RFCNT              0x0054
+#define AR5K_RFCNT_M            0x0000001f      /* [5211+] (?) */
+#define AR5K_RFCNT_RFCL         0x0000000f      /* [5210] */
+
+/*
+ * Misc settings register
+ * (reserved0-3)
+ */
+#define AR5K_MISC               0x0058                  /* Register Address */
+#define AR5K_MISC_DMA_OBS_M     0x000001e0
+#define AR5K_MISC_DMA_OBS_S     5
+#define AR5K_MISC_MISC_OBS_M    0x00000e00
+#define AR5K_MISC_MISC_OBS_S    9
+#define AR5K_MISC_MAC_OBS_LSB_M 0x00007000
+#define AR5K_MISC_MAC_OBS_LSB_S 12
+#define AR5K_MISC_MAC_OBS_MSB_M 0x00038000
+#define AR5K_MISC_MAC_OBS_MSB_S 15
+#define AR5K_MISC_LED_DECAY     0x001c0000      /* [5210] */
+#define AR5K_MISC_LED_BLINK     0x00e00000      /* [5210] */
+
+/*
+ * QCU/DCU clock gating register (5311)
+ * (reserved4-5)
+ */
+#define AR5K_QCUDCU_CLKGT       0x005c                  /* Register Address (?) */
+#define AR5K_QCUDCU_CLKGT_QCU   0x0000ffff      /* Mask for QCU clock */
+#define AR5K_QCUDCU_CLKGT_DCU   0x07ff0000      /* Mask for DCU clock */
+
+/*
+ * Interrupt Status Registers
+ *
+ * For 5210 there is only one status register but for
+ * 5211/5212 we have one primary and 4 secondary registers.
+ * So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212.
+ * Most of these bits are common for all chipsets.
+ */
+#define AR5K_ISR                0x001c                  /* Register Address [5210] */
+#define AR5K_PISR               0x0080                  /* Register Address [5211+] */
+#define AR5K_ISR_RXOK           0x00000001      /* Frame successfuly recieved */
+#define AR5K_ISR_RXDESC         0x00000002      /* RX descriptor request */
+#define AR5K_ISR_RXERR          0x00000004      /* Receive error */
+#define AR5K_ISR_RXNOFRM        0x00000008      /* No frame received (receive timeout) */
+#define AR5K_ISR_RXEOL          0x00000010      /* Empty RX descriptor */
+#define AR5K_ISR_RXORN          0x00000020      /* Receive FIFO overrun */
+#define AR5K_ISR_TXOK           0x00000040      /* Frame successfuly transmited */
+#define AR5K_ISR_TXDESC         0x00000080      /* TX descriptor request */
+#define AR5K_ISR_TXERR          0x00000100      /* Transmit error */
+#define AR5K_ISR_TXNOFRM        0x00000200      /* No frame transmited (transmit timeout) */
+#define AR5K_ISR_TXEOL          0x00000400      /* Empty TX descriptor */
+#define AR5K_ISR_TXURN          0x00000800      /* Transmit FIFO underrun */
+#define AR5K_ISR_MIB            0x00001000      /* Update MIB counters */
+#define AR5K_ISR_SWI            0x00002000      /* Software interrupt */
+#define AR5K_ISR_RXPHY          0x00004000      /* PHY error */
+#define AR5K_ISR_RXKCM          0x00008000      /* RX Key cache miss */
+#define AR5K_ISR_SWBA           0x00010000      /* Software beacon alert */
+#define AR5K_ISR_BRSSI          0x00020000      /* Beacon rssi below threshold (?) */
+#define AR5K_ISR_BMISS          0x00040000      /* Beacon missed */
+#define AR5K_ISR_HIUERR         0x00080000      /* Host Interface Unit error [5211+] */
+#define AR5K_ISR_BNR            0x00100000      /* Beacon not ready [5211+] */
+#define AR5K_ISR_MCABT          0x00100000      /* Master Cycle Abort [5210] */
+#define AR5K_ISR_RXCHIRP        0x00200000      /* CHIRP Received [5212+] */
+#define AR5K_ISR_SSERR          0x00200000      /* Signaled System Error [5210] */
+#define AR5K_ISR_DPERR          0x00400000      /* Det par Error (?) [5210] */
+#define AR5K_ISR_RXDOPPLER      0x00400000      /* Doppler chirp received [5212+] */
+#define AR5K_ISR_TIM            0x00800000      /* [5211+] */
+#define AR5K_ISR_BCNMISC        0x00800000      /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+                                                CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
+#define AR5K_ISR_GPIO           0x01000000      /* GPIO (rf kill) */
+#define AR5K_ISR_QCBRORN        0x02000000      /* QCU CBR overrun [5211+] */
+#define AR5K_ISR_QCBRURN        0x04000000      /* QCU CBR underrun [5211+] */
+#define AR5K_ISR_QTRIG          0x08000000      /* QCU scheduling trigger [5211+] */
+
+/*
+ * Secondary status registers [5211+] (0 - 4)
+ *
+ * These give the status for each QCU, only QCUs 0-9 are
+ * represented.
+ */
+#define AR5K_SISR0              0x0084                  /* Register Address [5211+] */
+#define AR5K_SISR0_QCU_TXOK     0x000003ff      /* Mask for QCU_TXOK */
+#define AR5K_SISR0_QCU_TXOK_S   0
+#define AR5K_SISR0_QCU_TXDESC   0x03ff0000      /* Mask for QCU_TXDESC */
+#define AR5K_SISR0_QCU_TXDESC_S 16
+
+#define AR5K_SISR1              0x0088                  /* Register Address [5211+] */
+#define AR5K_SISR1_QCU_TXERR    0x000003ff      /* Mask for QCU_TXERR */
+#define AR5K_SISR1_QCU_TXERR_S  0
+#define AR5K_SISR1_QCU_TXEOL    0x03ff0000      /* Mask for QCU_TXEOL */
+#define AR5K_SISR1_QCU_TXEOL_S  16
+
+#define AR5K_SISR2              0x008c                  /* Register Address [5211+] */
+#define AR5K_SISR2_QCU_TXURN    0x000003ff      /* Mask for QCU_TXURN */
+#define AR5K_SISR2_QCU_TXURN_S  0
+#define AR5K_SISR2_MCABT        0x00100000      /* Master Cycle Abort */
+#define AR5K_SISR2_SSERR        0x00200000      /* Signaled System Error */
+#define AR5K_SISR2_DPERR        0x00400000      /* Bus parity error */
+#define AR5K_SISR2_TIM          0x01000000      /* [5212+] */
+#define AR5K_SISR2_CAB_END      0x02000000      /* [5212+] */
+#define AR5K_SISR2_DTIM_SYNC    0x04000000      /* DTIM sync lost [5212+] */
+#define AR5K_SISR2_BCN_TIMEOUT  0x08000000      /* Beacon Timeout [5212+] */
+#define AR5K_SISR2_CAB_TIMEOUT  0x10000000      /* CAB Timeout [5212+] */
+#define AR5K_SISR2_DTIM         0x20000000      /* [5212+] */
+#define AR5K_SISR2_TSFOOR       0x80000000      /* TSF OOR (?) */
+
+#define AR5K_SISR3              0x0090                  /* Register Address [5211+] */
+#define AR5K_SISR3_QCBRORN      0x000003ff      /* Mask for QCBRORN */
+#define AR5K_SISR3_QCBRORN_S    0
+#define AR5K_SISR3_QCBRURN      0x03ff0000      /* Mask for QCBRURN */
+#define AR5K_SISR3_QCBRURN_S    16
+
+#define AR5K_SISR4              0x0094                  /* Register Address [5211+] */
+#define AR5K_SISR4_QTRIG        0x000003ff      /* Mask for QTRIG */
+#define AR5K_SISR4_QTRIG_S      0
+
+/*
+ * Shadow read-and-clear interrupt status registers [5211+]
+ */
+#define AR5K_RAC_PISR           0x00c0          /* Read and clear PISR */
+#define AR5K_RAC_SISR0          0x00c4          /* Read and clear SISR0 */
+#define AR5K_RAC_SISR1          0x00c8          /* Read and clear SISR1 */
+#define AR5K_RAC_SISR2          0x00cc          /* Read and clear SISR2 */
+#define AR5K_RAC_SISR3          0x00d0          /* Read and clear SISR3 */
+#define AR5K_RAC_SISR4          0x00d4          /* Read and clear SISR4 */
+
+/*
+ * Interrupt Mask Registers
+ *
+ * As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary
+ * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match.
+ */
+#define AR5K_IMR                0x0020                  /* Register Address [5210] */
+#define AR5K_PIMR               0x00a0                  /* Register Address [5211+] */
+#define AR5K_IMR_RXOK           0x00000001      /* Frame successfuly recieved*/
+#define AR5K_IMR_RXDESC         0x00000002      /* RX descriptor request*/
+#define AR5K_IMR_RXERR          0x00000004      /* Receive error*/
+#define AR5K_IMR_RXNOFRM        0x00000008      /* No frame received (receive timeout)*/
+#define AR5K_IMR_RXEOL          0x00000010      /* Empty RX descriptor*/
+#define AR5K_IMR_RXORN          0x00000020      /* Receive FIFO overrun*/
+#define AR5K_IMR_TXOK           0x00000040      /* Frame successfuly transmited*/
+#define AR5K_IMR_TXDESC         0x00000080      /* TX descriptor request*/
+#define AR5K_IMR_TXERR          0x00000100      /* Transmit error*/
+#define AR5K_IMR_TXNOFRM        0x00000200      /* No frame transmited (transmit timeout)*/
+#define AR5K_IMR_TXEOL          0x00000400      /* Empty TX descriptor*/
+#define AR5K_IMR_TXURN          0x00000800      /* Transmit FIFO underrun*/
+#define AR5K_IMR_MIB            0x00001000      /* Update MIB counters*/
+#define AR5K_IMR_SWI            0x00002000      /* Software interrupt */
+#define AR5K_IMR_RXPHY          0x00004000      /* PHY error*/
+#define AR5K_IMR_RXKCM          0x00008000      /* RX Key cache miss */
+#define AR5K_IMR_SWBA           0x00010000      /* Software beacon alert*/
+#define AR5K_IMR_BRSSI          0x00020000      /* Beacon rssi below threshold (?) */
+#define AR5K_IMR_BMISS          0x00040000      /* Beacon missed*/
+#define AR5K_IMR_HIUERR         0x00080000      /* Host Interface Unit error [5211+] */
+#define AR5K_IMR_BNR            0x00100000      /* Beacon not ready [5211+] */
+#define AR5K_IMR_MCABT          0x00100000      /* Master Cycle Abort [5210] */
+#define AR5K_IMR_RXCHIRP        0x00200000      /* CHIRP Received [5212+]*/
+#define AR5K_IMR_SSERR          0x00200000      /* Signaled System Error [5210] */
+#define AR5K_IMR_DPERR          0x00400000      /* Det par Error (?) [5210] */
+#define AR5K_IMR_RXDOPPLER      0x00400000      /* Doppler chirp received [5212+] */
+#define AR5K_IMR_TIM            0x00800000      /* [5211+] */
+#define AR5K_IMR_BCNMISC        0x00800000      /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+                                                CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
+#define AR5K_IMR_GPIO           0x01000000      /* GPIO (rf kill)*/
+#define AR5K_IMR_QCBRORN        0x02000000      /* QCU CBR overrun (?) [5211+] */
+#define AR5K_IMR_QCBRURN        0x04000000      /* QCU CBR underrun (?) [5211+] */
+#define AR5K_IMR_QTRIG          0x08000000      /* QCU scheduling trigger [5211+] */
+
+/*
+ * Secondary interrupt mask registers [5211+] (0 - 4)
+ */
+#define AR5K_SIMR0              0x00a4                  /* Register Address [5211+] */
+#define AR5K_SIMR0_QCU_TXOK     0x000003ff      /* Mask for QCU_TXOK */
+#define AR5K_SIMR0_QCU_TXOK_S   0
+#define AR5K_SIMR0_QCU_TXDESC   0x03ff0000      /* Mask for QCU_TXDESC */
+#define AR5K_SIMR0_QCU_TXDESC_S 16
+
+#define AR5K_SIMR1              0x00a8                  /* Register Address [5211+] */
+#define AR5K_SIMR1_QCU_TXERR    0x000003ff      /* Mask for QCU_TXERR */
+#define AR5K_SIMR1_QCU_TXERR_S  0
+#define AR5K_SIMR1_QCU_TXEOL    0x03ff0000      /* Mask for QCU_TXEOL */
+#define AR5K_SIMR1_QCU_TXEOL_S  16
+
+#define AR5K_SIMR2              0x00ac                  /* Register Address [5211+] */
+#define AR5K_SIMR2_QCU_TXURN    0x000003ff      /* Mask for QCU_TXURN */
+#define AR5K_SIMR2_QCU_TXURN_S  0
+#define AR5K_SIMR2_MCABT        0x00100000      /* Master Cycle Abort */
+#define AR5K_SIMR2_SSERR        0x00200000      /* Signaled System Error */
+#define AR5K_SIMR2_DPERR        0x00400000      /* Bus parity error */
+#define AR5K_SIMR2_TIM          0x01000000      /* [5212+] */
+#define AR5K_SIMR2_CAB_END      0x02000000      /* [5212+] */
+#define AR5K_SIMR2_DTIM_SYNC    0x04000000      /* DTIM Sync lost [5212+] */
+#define AR5K_SIMR2_BCN_TIMEOUT  0x08000000      /* Beacon Timeout [5212+] */
+#define AR5K_SIMR2_CAB_TIMEOUT  0x10000000      /* CAB Timeout [5212+] */
+#define AR5K_SIMR2_DTIM         0x20000000      /* [5212+] */
+#define AR5K_SIMR2_TSFOOR       0x80000000      /* TSF OOR (?) */
+
+#define AR5K_SIMR3              0x00b0                  /* Register Address [5211+] */
+#define AR5K_SIMR3_QCBRORN      0x000003ff      /* Mask for QCBRORN */
+#define AR5K_SIMR3_QCBRORN_S    0
+#define AR5K_SIMR3_QCBRURN      0x03ff0000      /* Mask for QCBRURN */
+#define AR5K_SIMR3_QCBRURN_S    16
+
+#define AR5K_SIMR4              0x00b4                  /* Register Address [5211+] */
+#define AR5K_SIMR4_QTRIG        0x000003ff      /* Mask for QTRIG */
+#define AR5K_SIMR4_QTRIG_S      0
+
+/*
+ * DMA Debug registers 0-7
+ * 0xe0 - 0xfc
+ */
+
+/*
+ * Decompression mask registers [5212+]
+ */
+#define AR5K_DCM_ADDR           0x0400          /*Decompression mask address (index) */
+#define AR5K_DCM_DATA           0x0404          /*Decompression mask data */
+
+/*
+ * Wake On Wireless pattern control register [5212+]
+ */
+#define AR5K_WOW_PCFG                   0x0410                  /* Register Address */
+#define AR5K_WOW_PCFG_PAT_MATCH_EN      0x00000001      /* Pattern match enable */
+#define AR5K_WOW_PCFG_LONG_FRAME_POL    0x00000002      /* Long frame policy */
+#define AR5K_WOW_PCFG_WOBMISS           0x00000004      /* Wake on bea(con) miss (?) */
+#define AR5K_WOW_PCFG_PAT_0_EN          0x00000100      /* Enable pattern 0 */
+#define AR5K_WOW_PCFG_PAT_1_EN          0x00000200      /* Enable pattern 1 */
+#define AR5K_WOW_PCFG_PAT_2_EN          0x00000400      /* Enable pattern 2 */
+#define AR5K_WOW_PCFG_PAT_3_EN          0x00000800      /* Enable pattern 3 */
+#define AR5K_WOW_PCFG_PAT_4_EN          0x00001000      /* Enable pattern 4 */
+#define AR5K_WOW_PCFG_PAT_5_EN          0x00002000      /* Enable pattern 5 */
+
+/*
+ * Wake On Wireless pattern index register (?) [5212+]
+ */
+#define AR5K_WOW_PAT_IDX        0x0414
+
+/*
+ * Wake On Wireless pattern data register [5212+]
+ */
+#define AR5K_WOW_PAT_DATA       0x0418                  /* Register Address */
+#define AR5K_WOW_PAT_DATA_0_3_V 0x00000001      /* Pattern 0, 3 value */
+#define AR5K_WOW_PAT_DATA_1_4_V 0x00000100      /* Pattern 1, 4 value */
+#define AR5K_WOW_PAT_DATA_2_5_V 0x00010000      /* Pattern 2, 5 value */
+#define AR5K_WOW_PAT_DATA_0_3_M 0x01000000      /* Pattern 0, 3 mask */
+#define AR5K_WOW_PAT_DATA_1_4_M 0x04000000      /* Pattern 1, 4 mask */
+#define AR5K_WOW_PAT_DATA_2_5_M 0x10000000      /* Pattern 2, 5 mask */
+
+/*
+ * Decompression configuration registers [5212+]
+ */
+#define AR5K_DCCFG              0x0420                  /* Register Address */
+#define AR5K_DCCFG_GLOBAL_EN    0x00000001      /* Enable decompression on all queues */
+#define AR5K_DCCFG_BYPASS_EN    0x00000002      /* Bypass decompression */
+#define AR5K_DCCFG_BCAST_EN     0x00000004      /* Enable decompression for bcast frames */
+#define AR5K_DCCFG_MCAST_EN     0x00000008      /* Enable decompression for mcast frames */
+
+/*
+ * Compression configuration registers [5212+]
+ */
+#define AR5K_CCFG               0x0600                  /* Register Address */
+#define AR5K_CCFG_WINDOW_SIZE   0x00000007      /* Compression window size */
+#define AR5K_CCFG_CPC_EN        0x00000008      /* Enable performance counters */
+
+#define AR5K_CCFG_CCU           0x0604                  /* Register Address */
+#define AR5K_CCFG_CCU_CUP_EN    0x00000001      /* CCU Catchup enable */
+#define AR5K_CCFG_CCU_CREDIT    0x00000002      /* CCU Credit (field) */
+#define AR5K_CCFG_CCU_CD_THRES  0x00000080      /* CCU Cyc(lic?) debt threshold (field) */
+#define AR5K_CCFG_CCU_CUP_LCNT  0x00010000      /* CCU Catchup lit(?) count */
+#define AR5K_CCFG_CCU_INIT      0x00100200      /* Initial value during reset */
+
+/*
+ * Compression performance counter registers [5212+]
+ */
+#define AR5K_CPC0               0x0610          /* Compression performance counter 0 */
+#define AR5K_CPC1               0x0614          /* Compression performance counter 1*/
+#define AR5K_CPC2               0x0618          /* Compression performance counter 2 */
+#define AR5K_CPC3               0x061c          /* Compression performance counter 3 */
+#define AR5K_CPCOVF             0x0620          /* Compression performance overflow */
+
+
+/*
+ * Queue control unit (QCU) registers [5211+]
+ *
+ * Card has 12 TX Queues but i see that only 0-9 are used (?)
+ * both in binary HAL (see ah.h) and ar5k. Each queue has it's own
+ * TXDP at addresses 0x0800 - 0x082c, a CBR (Constant Bit Rate)
+ * configuration register (0x08c0 - 0x08ec), a ready time configuration
+ * register (0x0900 - 0x092c), a misc configuration register (0x09c0 -
+ * 0x09ec) and a status register (0x0a00 - 0x0a2c). We also have some
+ * global registers, QCU transmit enable/disable and "one shot arm (?)"
+ * set/clear, which contain status for all queues (we shift by 1 for each
+ * queue). To access these registers easily we define some macros here
+ * that are used inside HAL. For more infos check out *_tx_queue functs.
+ */
+
+/*
+ * Generic QCU Register access macros
+ */
+#define AR5K_QUEUE_REG(_r, _q)          (((_q) << 2) + _r)
+#define AR5K_QCU_GLOBAL_READ(_r, _q)    (AR5K_REG_READ(_r) & (1 << _q))
+#define AR5K_QCU_GLOBAL_WRITE(_r, _q)   AR5K_REG_WRITE(_r, (1 << _q))
+
+/*
+ * QCU Transmit descriptor pointer registers
+ */
+#define AR5K_QCU_TXDP_BASE      0x0800          /* Register Address - Queue0 TXDP */
+#define AR5K_QUEUE_TXDP(_q)     AR5K_QUEUE_REG(AR5K_QCU_TXDP_BASE, _q)
+
+/*
+ * QCU Transmit enable register
+ */
+#define AR5K_QCU_TXE            0x0840
+#define AR5K_ENABLE_QUEUE(_q)   AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXE, _q)
+#define AR5K_QUEUE_ENABLED(_q)  AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXE, _q)
+
+/*
+ * QCU Transmit disable register
+ */
+#define AR5K_QCU_TXD            0x0880
+#define AR5K_DISABLE_QUEUE(_q)  AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXD, _q)
+#define AR5K_QUEUE_DISABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXD, _q)
+
+/*
+ * QCU Constant Bit Rate configuration registers
+ */
+#define AR5K_QCU_CBRCFG_BASE            0x08c0  /* Register Address - Queue0 CBRCFG */
+#define AR5K_QCU_CBRCFG_INTVAL          0x00ffffff      /* CBR Interval mask */
+#define AR5K_QCU_CBRCFG_INTVAL_S        0
+#define AR5K_QCU_CBRCFG_ORN_THRES       0xff000000      /* CBR overrun threshold mask */
+#define AR5K_QCU_CBRCFG_ORN_THRES_S     24
+#define AR5K_QUEUE_CBRCFG(_q)           AR5K_QUEUE_REG(AR5K_QCU_CBRCFG_BASE, _q)
+
+/*
+ * QCU Ready time configuration registers
+ */
+#define AR5K_QCU_RDYTIMECFG_BASE        0x0900  /* Register Address - Queue0 RDYTIMECFG */
+#define AR5K_QCU_RDYTIMECFG_INTVAL      0x00ffffff      /* Ready time interval mask */
+#define AR5K_QCU_RDYTIMECFG_INTVAL_S    0
+#define AR5K_QCU_RDYTIMECFG_ENABLE      0x01000000      /* Ready time enable mask */
+#define AR5K_QUEUE_RDYTIMECFG(_q)       AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q)
+
+/*
+ * QCU one shot arm set registers
+ */
+#define AR5K_QCU_ONESHOTARM_SET         0x0940  /* Register Address -QCU "one shot arm set (?)" */
+#define AR5K_QCU_ONESHOTARM_SET_M       0x0000ffff
+
+/*
+ * QCU one shot arm clear registers
+ */
+#define AR5K_QCU_ONESHOTARM_CLEAR       0x0980  /* Register Address -QCU "one shot arm clear (?)" */
+#define AR5K_QCU_ONESHOTARM_CLEAR_M     0x0000ffff
+
+/*
+ * QCU misc registers
+ */
+#define AR5K_QCU_MISC_BASE              0x09c0                  /* Register Address -Queue0 MISC */
+#define AR5K_QCU_MISC_FRSHED_M          0x0000000f      /* Frame sheduling mask */
+#define AR5K_QCU_MISC_FRSHED_ASAP               0       /* ASAP */
+#define AR5K_QCU_MISC_FRSHED_CBR                1       /* Constant Bit Rate */
+#define AR5K_QCU_MISC_FRSHED_DBA_GT             2       /* DMA Beacon alert gated */
+#define AR5K_QCU_MISC_FRSHED_TIM_GT             3       /* TIMT gated */
+#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT        4       /* Beacon sent gated */
+#define AR5K_QCU_MISC_ONESHOT_ENABLE    0x00000010      /* Oneshot enable */
+#define AR5K_QCU_MISC_CBREXP_DIS        0x00000020      /* Disable CBR expired counter (normal queue) */
+#define AR5K_QCU_MISC_CBREXP_BCN_DIS    0x00000040      /* Disable CBR expired counter (beacon queue) */
+#define AR5K_QCU_MISC_BCN_ENABLE        0x00000080      /* Enable Beacon use */
+#define AR5K_QCU_MISC_CBR_THRES_ENABLE  0x00000100      /* CBR expired threshold enabled */
+#define AR5K_QCU_MISC_RDY_VEOL_POLICY   0x00000200      /* TXE reset when RDYTIME expired or VEOL */
+#define AR5K_QCU_MISC_CBR_RESET_CNT     0x00000400      /* CBR threshold (counter) reset */
+#define AR5K_QCU_MISC_DCU_EARLY         0x00000800      /* DCU early termination */
+#define AR5K_QCU_MISC_DCU_CMP_EN        0x00001000      /* Enable frame compression */
+#define AR5K_QUEUE_MISC(_q)             AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q)
+
+
+/*
+ * QCU status registers
+ */
+#define AR5K_QCU_STS_BASE       0x0a00                  /* Register Address - Queue0 STS */
+#define AR5K_QCU_STS_FRMPENDCNT 0x00000003      /* Frames pending counter */
+#define AR5K_QCU_STS_CBREXPCNT  0x0000ff00      /* CBR expired counter */
+#define AR5K_QUEUE_STATUS(_q)   AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q)
+
+/*
+ * QCU ready time shutdown register
+ */
+#define AR5K_QCU_RDYTIMESHDN    0x0a40
+#define AR5K_QCU_RDYTIMESHDN_M  0x000003ff
+
+/*
+ * QCU compression buffer base registers [5212+]
+ */
+#define AR5K_QCU_CBB_SELECT     0x0b00
+#define AR5K_QCU_CBB_ADDR       0x0b04
+#define AR5K_QCU_CBB_ADDR_S     9
+
+/*
+ * QCU compression buffer configuration register [5212+]
+ * (buffer size)
+ */
+#define AR5K_QCU_CBCFG          0x0b08
+
+
+
+/*
+ * Distributed Coordination Function (DCF) control unit (DCU)
+ * registers [5211+]
+ *
+ * These registers control the various characteristics of each queue
+ * for 802.11e (WME) combatibility so they go together with
+ * QCU registers in pairs. For each queue we have a QCU mask register,
+ * (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c),
+ * a retry limit register (0x1080 - 0x10ac), a channel time register
+ * (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and
+ * a sequence number register (0x1140 - 0x116c). It seems that "global"
+ * registers here afect all queues (see use of DCU_GBL_IFS_SLOT in ar5k).
+ * We use the same macros here for easier register access.
+ *
+ */
+
+/*
+ * DCU QCU mask registers
+ */
+#define AR5K_DCU_QCUMASK_BASE   0x1000          /* Register Address -Queue0 DCU_QCUMASK */
+#define AR5K_DCU_QCUMASK_M      0x000003ff
+#define AR5K_QUEUE_QCUMASK(_q)  AR5K_QUEUE_REG(AR5K_DCU_QCUMASK_BASE, _q)
+
+/*
+ * DCU local Inter Frame Space settings register
+ */
+#define AR5K_DCU_LCL_IFS_BASE           0x1040                  /* Register Address -Queue0 DCU_LCL_IFS */
+#define AR5K_DCU_LCL_IFS_CW_MIN         0x000003ff      /* Minimum Contention Window */
+#define AR5K_DCU_LCL_IFS_CW_MIN_S       0
+#define AR5K_DCU_LCL_IFS_CW_MAX         0x000ffc00      /* Maximum Contention Window */
+#define AR5K_DCU_LCL_IFS_CW_MAX_S       10
+#define AR5K_DCU_LCL_IFS_AIFS           0x0ff00000      /* Arbitrated Interframe Space */
+#define AR5K_DCU_LCL_IFS_AIFS_S         20
+#define AR5K_DCU_LCL_IFS_AIFS_MAX       0xfc            /* Anything above that can cause DCU to hang */
+#define AR5K_QUEUE_DFS_LOCAL_IFS(_q)    AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q)
+
+/*
+ * DCU retry limit registers
+ */
+#define AR5K_DCU_RETRY_LMT_BASE         0x1080                  /* Register Address -Queue0 DCU_RETRY_LMT */
+#define AR5K_DCU_RETRY_LMT_SH_RETRY     0x0000000f      /* Short retry limit mask */
+#define AR5K_DCU_RETRY_LMT_SH_RETRY_S   0
+#define AR5K_DCU_RETRY_LMT_LG_RETRY     0x000000f0      /* Long retry limit mask */
+#define AR5K_DCU_RETRY_LMT_LG_RETRY_S   4
+#define AR5K_DCU_RETRY_LMT_SSH_RETRY    0x00003f00      /* Station short retry limit mask (?) */
+#define AR5K_DCU_RETRY_LMT_SSH_RETRY_S  8
+#define AR5K_DCU_RETRY_LMT_SLG_RETRY    0x000fc000      /* Station long retry limit mask (?) */
+#define AR5K_DCU_RETRY_LMT_SLG_RETRY_S  14
+#define AR5K_QUEUE_DFS_RETRY_LIMIT(_q)  AR5K_QUEUE_REG(AR5K_DCU_RETRY_LMT_BASE, _q)
+
+/*
+ * DCU channel time registers
+ */
+#define AR5K_DCU_CHAN_TIME_BASE         0x10c0                  /* Register Address -Queue0 DCU_CHAN_TIME */
+#define AR5K_DCU_CHAN_TIME_DUR          0x000fffff      /* Channel time duration */
+#define AR5K_DCU_CHAN_TIME_DUR_S        0
+#define AR5K_DCU_CHAN_TIME_ENABLE       0x00100000      /* Enable channel time */
+#define AR5K_QUEUE_DFS_CHANNEL_TIME(_q) AR5K_QUEUE_REG(AR5K_DCU_CHAN_TIME_BASE, _q)
+
+/*
+ * DCU misc registers [5211+]
+ *
+ * Note: Arbiter lockout control controls the
+ * behaviour on low priority queues when we have multiple queues
+ * with pending frames. Intra-frame lockout means we wait until
+ * the queue's current frame transmits (with post frame backoff and bursting)
+ * before we transmit anything else and global lockout means we
+ * wait for the whole queue to finish before higher priority queues
+ * can transmit (this is used on beacon and CAB queues).
+ * No lockout means there is no special handling.
+ */
+#define AR5K_DCU_MISC_BASE              0x1100                  /* Register Address -Queue0 DCU_MISC */
+#define AR5K_DCU_MISC_BACKOFF           0x0000003f      /* Mask for backoff threshold */
+#define AR5K_DCU_MISC_ETS_RTS_POL       0x00000040      /* End of transmission series
+                                                        station RTS/data failure count
+                                                        reset policy (?) */
+#define AR5K_DCU_MISC_ETS_CW_POL        0x00000080      /* End of transmission series
+                                                        CW reset policy */
+#define AR5K_DCU_MISC_FRAG_WAIT         0x00000100      /* Wait for next fragment */
+#define AR5K_DCU_MISC_BACKOFF_FRAG      0x00000200      /* Enable backoff while bursting */
+#define AR5K_DCU_MISC_HCFPOLL_ENABLE    0x00000800      /* CF - Poll enable */
+#define AR5K_DCU_MISC_BACKOFF_PERSIST   0x00001000      /* Persistent backoff */
+#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE  0x00002000      /* Enable frame pre-fetch */
+#define AR5K_DCU_MISC_VIRTCOL           0x0000c000      /* Mask for Virtual Collision (?) */
+#define AR5K_DCU_MISC_VIRTCOL_NORMAL    0
+#define AR5K_DCU_MISC_VIRTCOL_IGNORE    1
+#define AR5K_DCU_MISC_BCN_ENABLE        0x00010000      /* Enable Beacon use */
+#define AR5K_DCU_MISC_ARBLOCK_CTL       0x00060000      /* Arbiter lockout control mask */
+#define AR5K_DCU_MISC_ARBLOCK_CTL_S     17
+#define AR5K_DCU_MISC_ARBLOCK_CTL_NONE          0       /* No arbiter lockout */
+#define AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM        1       /* Intra-frame lockout */
+#define AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL        2       /* Global lockout */
+#define AR5K_DCU_MISC_ARBLOCK_IGNORE    0x00080000      /* Ignore Arbiter lockout */
+#define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS  0x00100000      /* Disable sequence number increment */
+#define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000      /* Disable post-frame backoff */
+#define AR5K_DCU_MISC_VIRT_COLL_POLICY  0x00400000      /* Virtual Collision cw policy */
+#define AR5K_DCU_MISC_BLOWN_IFS_POLICY  0x00800000      /* Blown IFS policy (?) */
+#define AR5K_DCU_MISC_SEQNUM_CTL        0x01000000      /* Sequence number control (?) */
+#define AR5K_QUEUE_DFS_MISC(_q)         AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q)
+
+/*
+ * DCU frame sequence number registers
+ */
+#define AR5K_DCU_SEQNUM_BASE            0x1140
+#define AR5K_DCU_SEQNUM_M               0x00000fff
+#define AR5K_QUEUE_DCU_SEQNUM(_q)       AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q)
+
+/*
+ * DCU global IFS SIFS register
+ */
+#define AR5K_DCU_GBL_IFS_SIFS   0x1030
+#define AR5K_DCU_GBL_IFS_SIFS_M 0x0000ffff
+
+/*
+ * DCU global IFS slot interval register
+ */
+#define AR5K_DCU_GBL_IFS_SLOT   0x1070
+#define AR5K_DCU_GBL_IFS_SLOT_M 0x0000ffff
+
+/*
+ * DCU global IFS EIFS register
+ */
+#define AR5K_DCU_GBL_IFS_EIFS   0x10b0
+#define AR5K_DCU_GBL_IFS_EIFS_M 0x0000ffff
+
+/*
+ * DCU global IFS misc register
+ *
+ * LFSR stands for Linear Feedback Shift Register
+ * and it's used for generating pseudo-random
+ * number sequences.
+ *
+ * (If i understand corectly, random numbers are
+ * used for idle sensing -multiplied with cwmin/max etc-)
+ */
+#define AR5K_DCU_GBL_IFS_MISC                   0x10f0                  /* Register Address */
+#define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE        0x00000007      /* LFSR Slice Select */
+#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE        0x00000008      /* Turbo mode */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC     0x000003f0      /* SIFS Duration mask */
+#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR          0x000ffc00      /* USEC Duration mask */
+#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S        10
+#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY     0x00300000      /* DCU Arbiter delay mask */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST      0x00400000      /* SIFS cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST      0x00800000      /* AIFS cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS   0x01000000      /* Disable random LFSR slice */
+
+/*
+ * DCU frame prefetch control register
+ */
+#define AR5K_DCU_FP                     0x1230                  /* Register Address */
+#define AR5K_DCU_FP_NOBURST_DCU_EN      0x00000001      /* Enable non-burst prefetch on DCU (?) */
+#define AR5K_DCU_FP_NOBURST_EN          0x00000010      /* Enable non-burst prefetch (?) */
+#define AR5K_DCU_FP_BURST_DCU_EN        0x00000020      /* Enable burst prefetch on DCU (?) */
+
+/*
+ * DCU transmit pause control/status register
+ */
+#define AR5K_DCU_TXP            0x1270                  /* Register Address */
+#define AR5K_DCU_TXP_M          0x000003ff      /* Tx pause mask */
+#define AR5K_DCU_TXP_STATUS     0x00010000      /* Tx pause status */
+
+/*
+ * DCU transmit filter table 0 (32 entries)
+ * each entry contains a 32bit slice of the
+ * 128bit tx filter for each DCU (4 slices per DCU)
+ */
+#define AR5K_DCU_TX_FILTER_0_BASE       0x1038
+#define AR5K_DCU_TX_FILTER_0(_n)        (AR5K_DCU_TX_FILTER_0_BASE + (_n * 64))
+
+/*
+ * DCU transmit filter table 1 (16 entries)
+ */
+#define AR5K_DCU_TX_FILTER_1_BASE       0x103c
+#define AR5K_DCU_TX_FILTER_1(_n)        (AR5K_DCU_TX_FILTER_1_BASE + (_n * 64))
+
+/*
+ * DCU clear transmit filter register
+ */
+#define AR5K_DCU_TX_FILTER_CLR  0x143c
+
+/*
+ * DCU set transmit filter register
+ */
+#define AR5K_DCU_TX_FILTER_SET  0x147c
+
+/*
+ * Reset control register
+ */
+#define AR5K_RESET_CTL          0x4000                  /* Register Address */
+#define AR5K_RESET_CTL_PCU      0x00000001      /* Protocol Control Unit reset */
+#define AR5K_RESET_CTL_DMA      0x00000002      /* DMA (Rx/Tx) reset [5210] */
+#define AR5K_RESET_CTL_BASEBAND 0x00000002      /* Baseband reset [5211+] */
+#define AR5K_RESET_CTL_MAC      0x00000004      /* MAC reset (PCU+Baseband ?) [5210] */
+#define AR5K_RESET_CTL_PHY      0x00000008      /* PHY reset [5210] */
+#define AR5K_RESET_CTL_PCI      0x00000010      /* PCI Core reset (interrupts etc) */
+
+/*
+ * Sleep control register
+ */
+#define AR5K_SLEEP_CTL                  0x4004                  /* Register Address */
+#define AR5K_SLEEP_CTL_SLDUR            0x0000ffff      /* Sleep duration mask */
+#define AR5K_SLEEP_CTL_SLDUR_S          0
+#define AR5K_SLEEP_CTL_SLE              0x00030000      /* Sleep enable mask */
+#define AR5K_SLEEP_CTL_SLE_S            16
+#define AR5K_SLEEP_CTL_SLE_WAKE         0x00000000      /* Force chip awake */
+#define AR5K_SLEEP_CTL_SLE_SLP          0x00010000      /* Force chip sleep */
+#define AR5K_SLEEP_CTL_SLE_ALLOW        0x00020000      /* Normal sleep policy */
+#define AR5K_SLEEP_CTL_SLE_UNITS        0x00000008      /* [5211+] */
+#define AR5K_SLEEP_CTL_DUR_TIM_POL      0x00040000      /* Sleep duration timing policy */
+#define AR5K_SLEEP_CTL_DUR_WRITE_POL    0x00080000      /* Sleep duration write policy */
+#define AR5K_SLEEP_CTL_SLE_POL          0x00100000      /* Sleep policy mode */
+
+/*
+ * Interrupt pending register
+ */
+#define AR5K_INTPEND    0x4008
+#define AR5K_INTPEND_M  0x00000001
+
+/*
+ * Sleep force register
+ */
+#define AR5K_SFR        0x400c
+#define AR5K_SFR_EN     0x00000001
+
+/*
+ * PCI configuration register
+ * TODO: Fix LED stuff
+ */
+#define AR5K_PCICFG                     0x4010                  /* Register Address */
+#define AR5K_PCICFG_EEAE                0x00000001      /* Eeprom access enable [5210] */
+#define AR5K_PCICFG_SLEEP_CLOCK_EN      0x00000002      /* Enable sleep clock */
+#define AR5K_PCICFG_CLKRUNEN            0x00000004      /* CLKRUN enable [5211+] */
+#define AR5K_PCICFG_EESIZE              0x00000018      /* Mask for EEPROM size [5211+] */
+#define AR5K_PCICFG_EESIZE_S            3
+#define AR5K_PCICFG_EESIZE_4K           0               /* 4K */
+#define AR5K_PCICFG_EESIZE_8K           1               /* 8K */
+#define AR5K_PCICFG_EESIZE_16K          2               /* 16K */
+#define AR5K_PCICFG_EESIZE_FAIL         3               /* Failed to get size [5211+] */
+#define AR5K_PCICFG_LED                 0x00000060      /* Led status [5211+] */
+#define AR5K_PCICFG_LED_NONE            0x00000000      /* Default [5211+] */
+#define AR5K_PCICFG_LED_PEND            0x00000020      /* Scan / Auth pending */
+#define AR5K_PCICFG_LED_ASSOC           0x00000040      /* Associated */
+#define AR5K_PCICFG_BUS_SEL             0x00000380      /* Mask for "bus select" [5211+] (?) */
+#define AR5K_PCICFG_CBEFIX_DIS          0x00000400      /* Disable CBE fix */
+#define AR5K_PCICFG_SL_INTEN            0x00000800      /* Enable interrupts when asleep */
+#define AR5K_PCICFG_LED_BCTL            0x00001000      /* Led blink (?) [5210] */
+#define AR5K_PCICFG_RETRY_FIX           0x00001000      /* Enable pci core retry fix */
+#define AR5K_PCICFG_SL_INPEN            0x00002000      /* Sleep even whith pending interrupts*/
+#define AR5K_PCICFG_SPWR_DN             0x00010000      /* Mask for power status */
+#define AR5K_PCICFG_LEDMODE             0x000e0000      /* Ledmode [5211+] */
+#define AR5K_PCICFG_LEDMODE_PROP        0x00000000      /* Blink on standard traffic [5211+] */
+#define AR5K_PCICFG_LEDMODE_PROM        0x00020000      /* Default mode (blink on any traffic) [5211+] */
+#define AR5K_PCICFG_LEDMODE_PWR         0x00040000      /* Some other blinking mode  (?) [5211+] */
+#define AR5K_PCICFG_LEDMODE_RAND        0x00060000      /* Random blinking (?) [5211+] */
+#define AR5K_PCICFG_LEDBLINK            0x00700000      /* Led blink rate */
+#define AR5K_PCICFG_LEDBLINK_S          20
+#define AR5K_PCICFG_LEDSLOW             0x00800000      /* Slowest led blink rate [5211+] */
+#define AR5K_PCICFG_LEDSTATE                            \
+        (AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE |        \
+        AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW)
+#define AR5K_PCICFG_SLEEP_CLOCK_RATE    0x03000000      /* Sleep clock rate */
+#define AR5K_PCICFG_SLEEP_CLOCK_RATE_S  24
+
+/*
+ * "General Purpose Input/Output" (GPIO) control register
+ *
+ * I'm not sure about this but after looking at the code
+ * for all chipsets here is what i got.
+ *
+ * We have 6 GPIOs (pins), each GPIO has 4 modes (2 bits)
+ * Mode 0 -> always input
+ * Mode 1 -> output when GPIODO for this GPIO is set to 0
+ * Mode 2 -> output when GPIODO for this GPIO is set to 1
+ * Mode 3 -> always output
+ *
+ * For more infos check out get_gpio/set_gpio and
+ * set_gpio_input/set_gpio_output functs.
+ * For more infos on gpio interrupt check out set_gpio_intr.
+ */
+#define AR5K_NUM_GPIO   6
+
+#define AR5K_GPIOCR             0x4014                          /* Register Address */
+#define AR5K_GPIOCR_INT_ENA     0x00008000              /* Enable GPIO interrupt */
+#define AR5K_GPIOCR_INT_SELL    0x00000000              /* Generate interrupt when pin is low */
+#define AR5K_GPIOCR_INT_SELH    0x00010000              /* Generate interrupt when pin is high */
+#define AR5K_GPIOCR_IN(n)       (0 << ((n) * 2))        /* Mode 0 for pin n */
+#define AR5K_GPIOCR_OUT0(n)     (1 << ((n) * 2))        /* Mode 1 for pin n */
+#define AR5K_GPIOCR_OUT1(n)     (2 << ((n) * 2))        /* Mode 2 for pin n */
+#define AR5K_GPIOCR_OUT(n)      (3 << ((n) * 2))        /* Mode 3 for pin n */
+#define AR5K_GPIOCR_INT_SEL(n)  ((n) << 12)             /* Interrupt for GPIO pin n */
+
+/*
+ * "General Purpose Input/Output" (GPIO) data output register
+ */
+#define AR5K_GPIODO     0x4018
+
+/*
+ * "General Purpose Input/Output" (GPIO) data input register
+ */
+#define AR5K_GPIODI     0x401c
+#define AR5K_GPIODI_M   0x0000002f
+
+/*
+ * Silicon revision register
+ */
+#define AR5K_SREV               0x4020                  /* Register Address */
+#define AR5K_SREV_REV           0x0000000f      /* Mask for revision */
+#define AR5K_SREV_REV_S         0
+#define AR5K_SREV_VER           0x000000ff      /* Mask for version */
+#define AR5K_SREV_VER_S         4
+
+/*
+ * TXE write posting register
+ */
+#define AR5K_TXEPOST    0x4028
+
+/*
+ * QCU sleep mask
+ */
+#define AR5K_QCU_SLEEP_MASK     0x402c
+
+/* 0x4068 is compression buffer configuration
+ * register on 5414 and pm configuration register
+ * on 5424 and newer pci-e chips. */
+
+/*
+ * Compression buffer configuration
+ * register (enable/disable) [5414]
+ */
+#define AR5K_5414_CBCFG         0x4068
+#define AR5K_5414_CBCFG_BUF_DIS 0x10    /* Disable buffer */
+
+/*
+ * PCI-E Power managment configuration
+ * and status register [5424+]
+ */
+#define AR5K_PCIE_PM_CTL                0x4068                  /* Register address */
+/* Only 5424 */
+#define AR5K_PCIE_PM_CTL_L1_WHEN_D2     0x00000001      /* enable PCIe core enter L1
+                                                        when d2_sleep_en is asserted */
+#define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR   0x00000002      /* Clear L0 and L0S counters */
+#define AR5K_PCIE_PM_CTL_L0_L0S_EN      0x00000004      /* Start L0 nd L0S counters */
+#define AR5K_PCIE_PM_CTL_LDRESET_EN     0x00000008      /* Enable reset when link goes
+                                                        down */
+/* Wake On Wireless */
+#define AR5K_PCIE_PM_CTL_PME_EN         0x00000010      /* PME Enable */
+#define AR5K_PCIE_PM_CTL_AUX_PWR_DET    0x00000020      /* Aux power detect */
+#define AR5K_PCIE_PM_CTL_PME_CLEAR      0x00000040      /* Clear PME */
+#define AR5K_PCIE_PM_CTL_PSM_D0         0x00000080
+#define AR5K_PCIE_PM_CTL_PSM_D1         0x00000100
+#define AR5K_PCIE_PM_CTL_PSM_D2         0x00000200
+#define AR5K_PCIE_PM_CTL_PSM_D3         0x00000400
+
+/*
+ * PCI-E Workaround enable register
+ */
+#define AR5K_PCIE_WAEN  0x407c
+
+/*
+ * PCI-E Serializer/Desirializer
+ * registers
+ */
+#define AR5K_PCIE_SERDES        0x4080
+#define AR5K_PCIE_SERDES_RESET  0x4084
+
+/*====EEPROM REGISTERS====*/
+
+/*
+ * EEPROM access registers
+ *
+ * Here we got a difference between 5210/5211-12
+ * read data register for 5210 is at 0x6800 and
+ * status register is at 0x6c00. There is also
+ * no eeprom command register on 5210 and the
+ * offsets are different.
+ *
+ * To read eeprom data for a specific offset:
+ * 5210 - enable eeprom access (AR5K_PCICFG_EEAE)
+ *        read AR5K_EEPROM_BASE +(4 * offset)
+ *        check the eeprom status register
+ *        and read eeprom data register.
+ *
+ * 5211 - write offset to AR5K_EEPROM_BASE
+ * 5212   write AR5K_EEPROM_CMD_READ on AR5K_EEPROM_CMD
+ *        check the eeprom status register
+ *        and read eeprom data register.
+ *
+ * To write eeprom data for a specific offset:
+ * 5210 - enable eeprom access (AR5K_PCICFG_EEAE)
+ *        write data to AR5K_EEPROM_BASE +(4 * offset)
+ *        check the eeprom status register
+ * 5211 - write AR5K_EEPROM_CMD_RESET on AR5K_EEPROM_CMD
+ * 5212   write offset to AR5K_EEPROM_BASE
+ *        write data to data register
+ *        write AR5K_EEPROM_CMD_WRITE on AR5K_EEPROM_CMD
+ *        check the eeprom status register
+ *
+ * For more infos check eeprom_* functs and the ar5k.c
+ * file posted in madwifi-devel mailing list.
+ * http://sourceforge.net/mailarchive/message.php?msg_id=8966525
+ *
+ */
+#define AR5K_EEPROM_BASE        0x6000
+
+/*
+ * EEPROM data register
+ */
+#define AR5K_EEPROM_DATA_5211   0x6004
+#define AR5K_EEPROM_DATA_5210   0x6800
+#define AR5K_EEPROM_DATA        (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_EEPROM_DATA_5210 : AR5K_EEPROM_DATA_5211)
+
+/*
+ * EEPROM command register
+ */
+#define AR5K_EEPROM_CMD         0x6008                  /* Register Addres */
+#define AR5K_EEPROM_CMD_READ    0x00000001      /* EEPROM read */
+#define AR5K_EEPROM_CMD_WRITE   0x00000002      /* EEPROM write */
+#define AR5K_EEPROM_CMD_RESET   0x00000004      /* EEPROM reset */
+
+/*
+ * EEPROM status register
+ */
+#define AR5K_EEPROM_STAT_5210   0x6c00                  /* Register Address [5210] */
+#define AR5K_EEPROM_STAT_5211   0x600c                  /* Register Address [5211+] */
+#define AR5K_EEPROM_STATUS      (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_EEPROM_STAT_5210 : AR5K_EEPROM_STAT_5211)
+#define AR5K_EEPROM_STAT_RDERR  0x00000001      /* EEPROM read failed */
+#define AR5K_EEPROM_STAT_RDDONE 0x00000002      /* EEPROM read successful */
+#define AR5K_EEPROM_STAT_WRERR  0x00000004      /* EEPROM write failed */
+#define AR5K_EEPROM_STAT_WRDONE 0x00000008      /* EEPROM write successful */
+
+/*
+ * EEPROM config register
+ */
+#define AR5K_EEPROM_CFG                 0x6010                  /* Register Addres */
+#define AR5K_EEPROM_CFG_SIZE            0x00000003              /* Size determination override */
+#define AR5K_EEPROM_CFG_SIZE_AUTO       0
+#define AR5K_EEPROM_CFG_SIZE_4KBIT      1
+#define AR5K_EEPROM_CFG_SIZE_8KBIT      2
+#define AR5K_EEPROM_CFG_SIZE_16KBIT     3
+#define AR5K_EEPROM_CFG_WR_WAIT_DIS     0x00000004      /* Disable write wait */
+#define AR5K_EEPROM_CFG_CLK_RATE        0x00000018      /* Clock rate */
+#define AR5K_EEPROM_CFG_CLK_RATE_S              3
+#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0
+#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1
+#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2
+#define AR5K_EEPROM_CFG_PROT_KEY        0x00ffff00      /* Protection key */
+#define AR5K_EEPROM_CFG_PROT_KEY_S      8
+#define AR5K_EEPROM_CFG_LIND_EN         0x01000000      /* Enable length indicator (?) */
+
+
+/*
+ * TODO: Wake On Wireless registers
+ * Range 0x7000 - 0x7ce0
+ */
+
+/*
+ * Protocol Control Unit (PCU) registers
+ */
+/*
+ * Used for checking initial register writes
+ * during channel reset (see reset func)
+ */
+#define AR5K_PCU_MIN    0x8000
+#define AR5K_PCU_MAX    0x8fff
+
+/*
+ * First station id register (Lower 32 bits of MAC address)
+ */
+#define AR5K_STA_ID0            0x8000
+#define AR5K_STA_ID0_ARRD_L32   0xffffffff
+
+/*
+ * Second station id register (Upper 16 bits of MAC address + PCU settings)
+ */
+#define AR5K_STA_ID1                    0x8004                  /* Register Address */
+#define AR5K_STA_ID1_ADDR_U16           0x0000ffff      /* Upper 16 bits of MAC addres */
+#define AR5K_STA_ID1_AP                 0x00010000      /* Set AP mode */
+#define AR5K_STA_ID1_ADHOC              0x00020000      /* Set Ad-Hoc mode */
+#define AR5K_STA_ID1_PWR_SV             0x00040000      /* Power save reporting */
+#define AR5K_STA_ID1_NO_KEYSRCH         0x00080000      /* No key search */
+#define AR5K_STA_ID1_NO_PSPOLL          0x00100000      /* No power save polling [5210] */
+#define AR5K_STA_ID1_PCF_5211           0x00100000      /* Enable PCF on [5211+] */
+#define AR5K_STA_ID1_PCF_5210           0x00200000      /* Enable PCF on [5210]*/
+#define AR5K_STA_ID1_PCF                (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211)
+#define AR5K_STA_ID1_DEFAULT_ANTENNA    0x00200000      /* Use default antenna */
+#define AR5K_STA_ID1_DESC_ANTENNA       0x00400000      /* Update antenna from descriptor */
+#define AR5K_STA_ID1_RTS_DEF_ANTENNA    0x00800000      /* Use default antenna for RTS */
+#define AR5K_STA_ID1_ACKCTS_6MB         0x01000000      /* Use 6Mbit/s for ACK/CTS */
+#define AR5K_STA_ID1_BASE_RATE_11B      0x02000000      /* Use 11b base rate for ACK/CTS [5211+] */
+#define AR5K_STA_ID1_SELFGEN_DEF_ANT    0x04000000      /* Use def. antenna for self generated frames */
+#define AR5K_STA_ID1_CRYPT_MIC_EN       0x08000000      /* Enable MIC */
+#define AR5K_STA_ID1_KEYSRCH_MODE       0x10000000      /* Look up key when key id != 0 */
+#define AR5K_STA_ID1_PRESERVE_SEQ_NUM   0x20000000      /* Preserve sequence number */
+#define AR5K_STA_ID1_CBCIV_ENDIAN       0x40000000      /* ??? */
+#define AR5K_STA_ID1_KEYSRCH_MCAST      0x80000000      /* Do key cache search for mcast frames */
+
+/*
+ * First BSSID register (MAC address, lower 32bits)
+ */
+#define AR5K_BSS_ID0    0x8008
+
+/*
+ * Second BSSID register (MAC address in upper 16 bits)
+ *
+ * AID: Association ID
+ */
+#define AR5K_BSS_ID1            0x800c
+#define AR5K_BSS_ID1_AID        0xffff0000
+#define AR5K_BSS_ID1_AID_S      16
+
+/*
+ * Backoff slot time register
+ */
+#define AR5K_SLOT_TIME  0x8010
+
+/*
+ * ACK/CTS timeout register
+ */
+#define AR5K_TIME_OUT           0x8014                  /* Register Address */
+#define AR5K_TIME_OUT_ACK       0x00001fff      /* ACK timeout mask */
+#define AR5K_TIME_OUT_ACK_S     0
+#define AR5K_TIME_OUT_CTS       0x1fff0000      /* CTS timeout mask */
+#define AR5K_TIME_OUT_CTS_S     16
+
+/*
+ * RSSI threshold register
+ */
+#define AR5K_RSSI_THR                   0x8018          /* Register Address */
+#define AR5K_RSSI_THR_M                 0x000000ff      /* Mask for RSSI threshold [5211+] */
+#define AR5K_RSSI_THR_BMISS_5210        0x00000700      /* Mask for Beacon Missed threshold [5210] */
+#define AR5K_RSSI_THR_BMISS_5210_S      8
+#define AR5K_RSSI_THR_BMISS_5211        0x0000ff00      /* Mask for Beacon Missed threshold [5211+] */
+#define AR5K_RSSI_THR_BMISS_5211_S      8
+#define AR5K_RSSI_THR_BMISS             (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_RSSI_THR_BMISS_5210 : AR5K_RSSI_THR_BMISS_5211)
+#define AR5K_RSSI_THR_BMISS_S           8
+
+/*
+ * 5210 has more PCU registers because there is no QCU/DCU
+ * so queue parameters are set here, this way a lot common
+ * registers have different address for 5210. To make things
+ * easier we define a macro based on ah->ah_version for common
+ * registers with different addresses and common flags.
+ */
+
+/*
+ * Retry limit register
+ *
+ * Retry limit register for 5210 (no QCU/DCU so it's done in PCU)
+ */
+#define AR5K_NODCU_RETRY_LMT            0x801c                  /* Register Address */
+#define AR5K_NODCU_RETRY_LMT_SH_RETRY   0x0000000f      /* Short retry limit mask */
+#define AR5K_NODCU_RETRY_LMT_SH_RETRY_S 0
+#define AR5K_NODCU_RETRY_LMT_LG_RETRY   0x000000f0      /* Long retry mask */
+#define AR5K_NODCU_RETRY_LMT_LG_RETRY_S 4
+#define AR5K_NODCU_RETRY_LMT_SSH_RETRY  0x00003f00      /* Station short retry limit mask */
+#define AR5K_NODCU_RETRY_LMT_SSH_RETRY_S        8
+#define AR5K_NODCU_RETRY_LMT_SLG_RETRY  0x000fc000      /* Station long retry limit mask */
+#define AR5K_NODCU_RETRY_LMT_SLG_RETRY_S        14
+#define AR5K_NODCU_RETRY_LMT_CW_MIN     0x3ff00000      /* Minimum contention window mask */
+#define AR5K_NODCU_RETRY_LMT_CW_MIN_S   20
+
+/*
+ * Transmit latency register
+ */
+#define AR5K_USEC_5210                  0x8020                  /* Register Address [5210] */
+#define AR5K_USEC_5211                  0x801c                  /* Register Address [5211+] */
+#define AR5K_USEC                       (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_USEC_5210 : AR5K_USEC_5211)
+#define AR5K_USEC_1                     0x0000007f      /* clock cycles for 1us */
+#define AR5K_USEC_1_S                   0
+#define AR5K_USEC_32                    0x00003f80      /* clock cycles for 1us while on 32Mhz clock */
+#define AR5K_USEC_32_S                  7
+#define AR5K_USEC_TX_LATENCY_5211       0x007fc000
+#define AR5K_USEC_TX_LATENCY_5211_S     14
+#define AR5K_USEC_RX_LATENCY_5211       0x1f800000
+#define AR5K_USEC_RX_LATENCY_5211_S     23
+#define AR5K_USEC_TX_LATENCY_5210       0x000fc000      /* also for 5311 */
+#define AR5K_USEC_TX_LATENCY_5210_S     14
+#define AR5K_USEC_RX_LATENCY_5210       0x03f00000      /* also for 5311 */
+#define AR5K_USEC_RX_LATENCY_5210_S     20
+
+/*
+ * PCU beacon control register
+ */
+#define AR5K_BEACON_5210        0x8024                  /*Register Address [5210] */
+#define AR5K_BEACON_5211        0x8020                  /*Register Address [5211+] */
+#define AR5K_BEACON             (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_BEACON_5210 : AR5K_BEACON_5211)
+#define AR5K_BEACON_PERIOD      0x0000ffff      /* Mask for beacon period */
+#define AR5K_BEACON_PERIOD_S    0
+#define AR5K_BEACON_TIM         0x007f0000      /* Mask for TIM offset */
+#define AR5K_BEACON_TIM_S       16
+#define AR5K_BEACON_ENABLE      0x00800000      /* Enable beacons */
+#define AR5K_BEACON_RESET_TSF   0x01000000      /* Force TSF reset */
+
+/*
+ * CFP period register
+ */
+#define AR5K_CFP_PERIOD_5210    0x8028
+#define AR5K_CFP_PERIOD_5211    0x8024
+#define AR5K_CFP_PERIOD         (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_CFP_PERIOD_5210 : AR5K_CFP_PERIOD_5211)
+
+/*
+ * Next beacon time register
+ */
+#define AR5K_TIMER0_5210        0x802c
+#define AR5K_TIMER0_5211        0x8028
+#define AR5K_TIMER0             (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_TIMER0_5210 : AR5K_TIMER0_5211)
+
+/*
+ * Next DMA beacon alert register
+ */
+#define AR5K_TIMER1_5210        0x8030
+#define AR5K_TIMER1_5211        0x802c
+#define AR5K_TIMER1             (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_TIMER1_5210 : AR5K_TIMER1_5211)
+
+/*
+ * Next software beacon alert register
+ */
+#define AR5K_TIMER2_5210        0x8034
+#define AR5K_TIMER2_5211        0x8030
+#define AR5K_TIMER2             (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_TIMER2_5210 : AR5K_TIMER2_5211)
+
+/*
+ * Next ATIM window time register
+ */
+#define AR5K_TIMER3_5210        0x8038
+#define AR5K_TIMER3_5211        0x8034
+#define AR5K_TIMER3             (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_TIMER3_5210 : AR5K_TIMER3_5211)
+
+
+/*
+ * 5210 First inter frame spacing register (IFS)
+ */
+#define AR5K_IFS0               0x8040
+#define AR5K_IFS0_SIFS          0x000007ff
+#define AR5K_IFS0_SIFS_S        0
+#define AR5K_IFS0_DIFS          0x007ff800
+#define AR5K_IFS0_DIFS_S        11
+
+/*
+ * 5210 Second inter frame spacing register (IFS)
+ */
+#define AR5K_IFS1               0x8044
+#define AR5K_IFS1_PIFS          0x00000fff
+#define AR5K_IFS1_PIFS_S        0
+#define AR5K_IFS1_EIFS          0x03fff000
+#define AR5K_IFS1_EIFS_S        12
+#define AR5K_IFS1_CS_EN         0x04000000
+
+
+/*
+ * CFP duration register
+ */
+#define AR5K_CFP_DUR_5210       0x8048
+#define AR5K_CFP_DUR_5211       0x8038
+#define AR5K_CFP_DUR            (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_CFP_DUR_5210 : AR5K_CFP_DUR_5211)
+
+/*
+ * Receive filter register
+ */
+#define AR5K_RX_FILTER_5210     0x804c                  /* Register Address [5210] */
+#define AR5K_RX_FILTER_5211     0x803c                  /* Register Address [5211+] */
+#define AR5K_RX_FILTER          (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211)
+#define AR5K_RX_FILTER_UCAST    0x00000001      /* Don't filter unicast frames */
+#define AR5K_RX_FILTER_MCAST    0x00000002      /* Don't filter multicast frames */
+#define AR5K_RX_FILTER_BCAST    0x00000004      /* Don't filter broadcast frames */
+#define AR5K_RX_FILTER_CONTROL  0x00000008      /* Don't filter control frames */
+#define AR5K_RX_FILTER_BEACON   0x00000010      /* Don't filter beacon frames */
+#define AR5K_RX_FILTER_PROM     0x00000020      /* Set promiscuous mode */
+#define AR5K_RX_FILTER_XRPOLL   0x00000040      /* Don't filter XR poll frame [5212+] */
+#define AR5K_RX_FILTER_PROBEREQ 0x00000080      /* Don't filter probe requests [5212+] */
+#define AR5K_RX_FILTER_PHYERR_5212      0x00000100      /* Don't filter phy errors [5212+] */
+#define AR5K_RX_FILTER_RADARERR_5212    0x00000200      /* Don't filter phy radar errors [5212+] */
+#define AR5K_RX_FILTER_PHYERR_5211      0x00000040      /* [5211] */
+#define AR5K_RX_FILTER_RADARERR_5211    0x00000080      /* [5211] */
+#define AR5K_RX_FILTER_PHYERR  \
+        ((ah->ah_version == AR5K_AR5211 ? \
+        AR5K_RX_FILTER_PHYERR_5211 : AR5K_RX_FILTER_PHYERR_5212))
+#define        AR5K_RX_FILTER_RADARERR \
+        ((ah->ah_version == AR5K_AR5211 ? \
+        AR5K_RX_FILTER_RADARERR_5211 : AR5K_RX_FILTER_RADARERR_5212))
+
+/*
+ * Multicast filter register (lower 32 bits)
+ */
+#define AR5K_MCAST_FILTER0_5210 0x8050
+#define AR5K_MCAST_FILTER0_5211 0x8040
+#define AR5K_MCAST_FILTER0      (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_MCAST_FILTER0_5210 : AR5K_MCAST_FILTER0_5211)
+
+/*
+ * Multicast filter register (higher 16 bits)
+ */
+#define AR5K_MCAST_FILTER1_5210 0x8054
+#define AR5K_MCAST_FILTER1_5211 0x8044
+#define AR5K_MCAST_FILTER1      (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_MCAST_FILTER1_5210 : AR5K_MCAST_FILTER1_5211)
+
+
+/*
+ * Transmit mask register (lower 32 bits) [5210]
+ */
+#define AR5K_TX_MASK0   0x8058
+
+/*
+ * Transmit mask register (higher 16 bits) [5210]
+ */
+#define AR5K_TX_MASK1   0x805c
+
+/*
+ * Clear transmit mask [5210]
+ */
+#define AR5K_CLR_TMASK  0x8060
+
+/*
+ * Trigger level register (before transmission) [5210]
+ */
+#define AR5K_TRIG_LVL   0x8064
+
+
+/*
+ * PCU control register
+ *
+ * Only DIS_RX is used in the code, the rest i guess are
+ * for tweaking/diagnostics.
+ */
+#define AR5K_DIAG_SW_5210               0x8068                  /* Register Address [5210] */
+#define AR5K_DIAG_SW_5211               0x8048                  /* Register Address [5211+] */
+#define AR5K_DIAG_SW                    (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211)
+#define AR5K_DIAG_SW_DIS_WEP_ACK        0x00000001      /* Disable ACKs if WEP key is invalid */
+#define AR5K_DIAG_SW_DIS_ACK            0x00000002      /* Disable ACKs */
+#define AR5K_DIAG_SW_DIS_CTS            0x00000004      /* Disable CTSs */
+#define AR5K_DIAG_SW_DIS_ENC            0x00000008      /* Disable encryption */
+#define AR5K_DIAG_SW_DIS_DEC            0x00000010      /* Disable decryption */
+#define AR5K_DIAG_SW_DIS_TX             0x00000020      /* Disable transmit [5210] */
+#define AR5K_DIAG_SW_DIS_RX_5210        0x00000040      /* Disable recieve */
+#define AR5K_DIAG_SW_DIS_RX_5211        0x00000020
+#define AR5K_DIAG_SW_DIS_RX             (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_DIAG_SW_DIS_RX_5210 : AR5K_DIAG_SW_DIS_RX_5211)
+#define AR5K_DIAG_SW_LOOP_BACK_5210     0x00000080      /* Loopback (i guess it goes with DIS_TX) [5210] */
+#define AR5K_DIAG_SW_LOOP_BACK_5211     0x00000040
+#define AR5K_DIAG_SW_LOOP_BACK          (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211)
+#define AR5K_DIAG_SW_CORR_FCS_5210      0x00000100      /* Corrupted FCS */
+#define AR5K_DIAG_SW_CORR_FCS_5211      0x00000080
+#define AR5K_DIAG_SW_CORR_FCS           (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211)
+#define AR5K_DIAG_SW_CHAN_INFO_5210     0x00000200      /* Dump channel info */
+#define AR5K_DIAG_SW_CHAN_INFO_5211     0x00000100
+#define AR5K_DIAG_SW_CHAN_INFO          (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211)
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400      /* Enable fixed scrambler seed */
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200
+#define AR5K_DIAG_SW_EN_SCRAM_SEED      (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211)
+#define AR5K_DIAG_SW_ECO_ENABLE         0x00000400      /* [5211+] */
+#define AR5K_DIAG_SW_SCVRAM_SEED        0x0003f800      /* [5210] */
+#define AR5K_DIAG_SW_SCRAM_SEED_M       0x0001fc00      /* Scrambler seed mask */
+#define AR5K_DIAG_SW_SCRAM_SEED_S       10
+#define AR5K_DIAG_SW_DIS_SEQ_INC        0x00040000      /* Disable seqnum increment (?)[5210] */
+#define AR5K_DIAG_SW_FRAME_NV0_5210     0x00080000
+#define AR5K_DIAG_SW_FRAME_NV0_5211     0x00020000      /* Accept frames of non-zero protocol number */
+#define AR5K_DIAG_SW_FRAME_NV0          (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211)
+#define AR5K_DIAG_SW_OBSPT_M            0x000c0000      /* Observation point select (?) */
+#define AR5K_DIAG_SW_OBSPT_S            18
+#define AR5K_DIAG_SW_RX_CLEAR_HIGH      0x0010000       /* Force RX Clear high */
+#define AR5K_DIAG_SW_IGNORE_CARR_SENSE  0x0020000       /* Ignore virtual carrier sense */
+#define AR5K_DIAG_SW_CHANEL_IDLE_HIGH   0x0040000       /* Force channel idle high */
+#define AR5K_DIAG_SW_PHEAR_ME           0x0080000       /* ??? */
+
+/*
+ * TSF (clock) register (lower 32 bits)
+ */
+#define AR5K_TSF_L32_5210       0x806c
+#define AR5K_TSF_L32_5211       0x804c
+#define AR5K_TSF_L32            (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211)
+
+/*
+ * TSF (clock) register (higher 32 bits)
+ */
+#define AR5K_TSF_U32_5210       0x8070
+#define AR5K_TSF_U32_5211       0x8050
+#define AR5K_TSF_U32            (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211)
+
+/*
+ * Last beacon timestamp register (Read Only)
+ */
+#define AR5K_LAST_TSTP  0x8080
+
+/*
+ * ADDAC test register [5211+]
+ */
+#define AR5K_ADDAC_TEST                 0x8054                  /* Register Address */
+#define AR5K_ADDAC_TEST_TXCONT          0x00000001      /* Test continuous tx */
+#define AR5K_ADDAC_TEST_TST_MODE        0x00000002      /* Test mode */
+#define AR5K_ADDAC_TEST_LOOP_EN         0x00000004      /* Enable loop */
+#define AR5K_ADDAC_TEST_LOOP_LEN        0x00000008      /* Loop length (field) */
+#define AR5K_ADDAC_TEST_USE_U8          0x00004000      /* Use upper 8 bits */
+#define AR5K_ADDAC_TEST_MSB             0x00008000      /* State of MSB */
+#define AR5K_ADDAC_TEST_TRIG_SEL        0x00010000      /* Trigger select */
+#define AR5K_ADDAC_TEST_TRIG_PTY        0x00020000      /* Trigger polarity */
+#define AR5K_ADDAC_TEST_RXCONT          0x00040000      /* Continuous capture */
+#define AR5K_ADDAC_TEST_CAPTURE         0x00080000      /* Begin capture */
+#define AR5K_ADDAC_TEST_TST_ARM         0x00100000      /* ARM rx buffer for capture */
+
+/*
+ * Default antenna register [5211+]
+ */
+#define AR5K_DEFAULT_ANTENNA    0x8058
+
+/*
+ * Frame control QoS mask register (?) [5211+]
+ * (FC_QOS_MASK)
+ */
+#define AR5K_FRAME_CTL_QOSM     0x805c
+
+/*
+ * Seq mask register (?) [5211+]
+ */
+#define AR5K_SEQ_MASK   0x8060
+
+/*
+ * Retry count register [5210]
+ */
+#define AR5K_RETRY_CNT          0x8084                  /* Register Address [5210] */
+#define AR5K_RETRY_CNT_SSH      0x0000003f      /* Station short retry count (?) */
+#define AR5K_RETRY_CNT_SLG      0x00000fc0      /* Station long retry count (?) */
+
+/*
+ * Back-off status register [5210]
+ */
+#define AR5K_BACKOFF            0x8088                  /* Register Address [5210] */
+#define AR5K_BACKOFF_CW         0x000003ff      /* Backoff Contention Window (?) */
+#define AR5K_BACKOFF_CNT        0x03ff0000      /* Backoff count (?) */
+
+
+
+/*
+ * NAV register (current)
+ */
+#define AR5K_NAV_5210           0x808c
+#define AR5K_NAV_5211           0x8084
+#define AR5K_NAV                (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_NAV_5210 : AR5K_NAV_5211)
+
+/*
+ * RTS success register
+ */
+#define AR5K_RTS_OK_5210        0x8090
+#define AR5K_RTS_OK_5211        0x8088
+#define AR5K_RTS_OK             (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_RTS_OK_5210 : AR5K_RTS_OK_5211)
+
+/*
+ * RTS failure register
+ */
+#define AR5K_RTS_FAIL_5210      0x8094
+#define AR5K_RTS_FAIL_5211      0x808c
+#define AR5K_RTS_FAIL           (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_RTS_FAIL_5210 : AR5K_RTS_FAIL_5211)
+
+/*
+ * ACK failure register
+ */
+#define AR5K_ACK_FAIL_5210      0x8098
+#define AR5K_ACK_FAIL_5211      0x8090
+#define AR5K_ACK_FAIL           (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_ACK_FAIL_5210 : AR5K_ACK_FAIL_5211)
+
+/*
+ * FCS failure register
+ */
+#define AR5K_FCS_FAIL_5210      0x809c
+#define AR5K_FCS_FAIL_5211      0x8094
+#define AR5K_FCS_FAIL           (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_FCS_FAIL_5210 : AR5K_FCS_FAIL_5211)
+
+/*
+ * Beacon count register
+ */
+#define AR5K_BEACON_CNT_5210    0x80a0
+#define AR5K_BEACON_CNT_5211    0x8098
+#define AR5K_BEACON_CNT         (ah->ah_version == AR5K_AR5210 ? \
+                                AR5K_BEACON_CNT_5210 : AR5K_BEACON_CNT_5211)
+
+
+/*===5212 Specific PCU registers===*/
+
+/*
+ * Transmit power control register
+ */
+#define AR5K_TPC                        0x80e8
+#define AR5K_TPC_ACK                    0x0000003f      /* ack frames */
+#define AR5K_TPC_ACK_S                  0
+#define AR5K_TPC_CTS                    0x00003f00      /* cts frames */
+#define AR5K_TPC_CTS_S                  8
+#define AR5K_TPC_CHIRP                  0x003f0000      /* chirp frames */
+#define AR5K_TPC_CHIRP_S                16
+#define AR5K_TPC_DOPPLER                0x0f000000      /* doppler chirp span */
+#define AR5K_TPC_DOPPLER_S              24
+
+/*
+ * XR (eXtended Range) mode register
+ */
+#define AR5K_XRMODE                     0x80c0                  /* Register Address */
+#define AR5K_XRMODE_POLL_TYPE_M         0x0000003f      /* Mask for Poll type (?) */
+#define AR5K_XRMODE_POLL_TYPE_S         0
+#define AR5K_XRMODE_POLL_SUBTYPE_M      0x0000003c      /* Mask for Poll subtype (?) */
+#define AR5K_XRMODE_POLL_SUBTYPE_S      2
+#define AR5K_XRMODE_POLL_WAIT_ALL       0x00000080      /* Wait for poll */
+#define AR5K_XRMODE_SIFS_DELAY          0x000fff00      /* Mask for SIFS delay */
+#define AR5K_XRMODE_FRAME_HOLD_M        0xfff00000      /* Mask for frame hold (?) */
+#define AR5K_XRMODE_FRAME_HOLD_S        20
+
+/*
+ * XR delay register
+ */
+#define AR5K_XRDELAY                    0x80c4                  /* Register Address */
+#define AR5K_XRDELAY_SLOT_DELAY_M       0x0000ffff      /* Mask for slot delay */
+#define AR5K_XRDELAY_SLOT_DELAY_S       0
+#define AR5K_XRDELAY_CHIRP_DELAY_M      0xffff0000      /* Mask for CHIRP data delay */
+#define AR5K_XRDELAY_CHIRP_DELAY_S      16
+
+/*
+ * XR timeout register
+ */
+#define AR5K_XRTIMEOUT                  0x80c8                  /* Register Address */
+#define AR5K_XRTIMEOUT_CHIRP_M          0x0000ffff      /* Mask for CHIRP timeout */
+#define AR5K_XRTIMEOUT_CHIRP_S          0
+#define AR5K_XRTIMEOUT_POLL_M           0xffff0000      /* Mask for Poll timeout */
+#define AR5K_XRTIMEOUT_POLL_S           16
+
+/*
+ * XR chirp register
+ */
+#define AR5K_XRCHIRP                    0x80cc                  /* Register Address */
+#define AR5K_XRCHIRP_SEND               0x00000001      /* Send CHIRP */
+#define AR5K_XRCHIRP_GAP                0xffff0000      /* Mask for CHIRP gap (?) */
+
+/*
+ * XR stomp register
+ */
+#define AR5K_XRSTOMP                    0x80d0                  /* Register Address */
+#define AR5K_XRSTOMP_TX                 0x00000001      /* Stomp Tx (?) */
+#define AR5K_XRSTOMP_RX                 0x00000002      /* Stomp Rx (?) */
+#define AR5K_XRSTOMP_TX_RSSI            0x00000004      /* Stomp Tx RSSI (?) */
+#define AR5K_XRSTOMP_TX_BSSID           0x00000008      /* Stomp Tx BSSID (?) */
+#define AR5K_XRSTOMP_DATA               0x00000010      /* Stomp data (?)*/
+#define AR5K_XRSTOMP_RSSI_THRES         0x0000ff00      /* Mask for XR RSSI threshold */
+
+/*
+ * First enhanced sleep register
+ */
+#define AR5K_SLEEP0                     0x80d4                  /* Register Address */
+#define AR5K_SLEEP0_NEXT_DTIM           0x0007ffff      /* Mask for next DTIM (?) */
+#define AR5K_SLEEP0_NEXT_DTIM_S         0
+#define AR5K_SLEEP0_ASSUME_DTIM         0x00080000      /* Assume DTIM */
+#define AR5K_SLEEP0_ENH_SLEEP_EN        0x00100000      /* Enable enchanced sleep control */
+#define AR5K_SLEEP0_CABTO               0xff000000      /* Mask for CAB Time Out */
+#define AR5K_SLEEP0_CABTO_S             24
+
+/*
+ * Second enhanced sleep register
+ */
+#define AR5K_SLEEP1                     0x80d8                  /* Register Address */
+#define AR5K_SLEEP1_NEXT_TIM            0x0007ffff      /* Mask for next TIM (?) */
+#define AR5K_SLEEP1_NEXT_TIM_S          0
+#define AR5K_SLEEP1_BEACON_TO           0xff000000      /* Mask for Beacon Time Out */
+#define AR5K_SLEEP1_BEACON_TO_S         24
+
+/*
+ * Third enhanced sleep register
+ */
+#define AR5K_SLEEP2                     0x80dc                  /* Register Address */
+#define AR5K_SLEEP2_TIM_PER             0x0000ffff      /* Mask for TIM period (?) */
+#define AR5K_SLEEP2_TIM_PER_S           0
+#define AR5K_SLEEP2_DTIM_PER            0xffff0000      /* Mask for DTIM period (?) */
+#define AR5K_SLEEP2_DTIM_PER_S          16
+
+/*
+ * BSSID mask registers
+ */
+#define AR5K_BSS_IDM0                   0x80e0  /* Upper bits */
+#define AR5K_BSS_IDM1                   0x80e4  /* Lower bits */
+
+/*
+ * TX power control (TPC) register
+ *
+ * XXX: PCDAC steps (0.5dbm) or DBM ?
+ *
+ */
+#define AR5K_TXPC                       0x80e8                  /* Register Address */
+#define AR5K_TXPC_ACK_M                 0x0000003f      /* ACK tx power */
+#define AR5K_TXPC_ACK_S                 0
+#define AR5K_TXPC_CTS_M                 0x00003f00      /* CTS tx power */
+#define AR5K_TXPC_CTS_S                 8
+#define AR5K_TXPC_CHIRP_M               0x003f0000      /* CHIRP tx power */
+#define AR5K_TXPC_CHIRP_S               16
+#define AR5K_TXPC_DOPPLER               0x0f000000      /* Doppler chirp span (?) */
+#define AR5K_TXPC_DOPPLER_S             24
+
+/*
+ * Profile count registers
+ */
+#define AR5K_PROFCNT_TX                 0x80ec  /* Tx count */
+#define AR5K_PROFCNT_RX                 0x80f0  /* Rx count */
+#define AR5K_PROFCNT_RXCLR              0x80f4  /* Clear Rx count */
+#define AR5K_PROFCNT_CYCLE              0x80f8  /* Cycle count (?) */
+
+/*
+ * Quiet period control registers
+ */
+#define AR5K_QUIET_CTL1                 0x80fc                  /* Register Address */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF     0x0000ffff      /* Next quiet period TSF (TU) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S   0
+#define AR5K_QUIET_CTL1_QT_EN           0x00010000      /* Enable quiet period */
+#define AR5K_QUIET_CTL1_ACK_CTS_EN      0x00020000      /* Send ACK/CTS during quiet period */
+
+#define AR5K_QUIET_CTL2                 0x8100                  /* Register Address */
+#define AR5K_QUIET_CTL2_QT_PER          0x0000ffff      /* Mask for quiet period periodicity */
+#define AR5K_QUIET_CTL2_QT_PER_S        0
+#define AR5K_QUIET_CTL2_QT_DUR          0xffff0000      /* Mask for quiet period duration */
+#define AR5K_QUIET_CTL2_QT_DUR_S        16
+
+/*
+ * TSF parameter register
+ */
+#define AR5K_TSF_PARM                   0x8104                  /* Register Address */
+#define AR5K_TSF_PARM_INC               0x000000ff      /* Mask for TSF increment */
+#define AR5K_TSF_PARM_INC_S             0
+
+/*
+ * QoS NOACK policy
+ */
+#define AR5K_QOS_NOACK                  0x8108                  /* Register Address */
+#define AR5K_QOS_NOACK_2BIT_VALUES      0x0000000f      /* ??? */
+#define AR5K_QOS_NOACK_2BIT_VALUES_S    0
+#define AR5K_QOS_NOACK_BIT_OFFSET       0x00000070      /* ??? */
+#define AR5K_QOS_NOACK_BIT_OFFSET_S     4
+#define AR5K_QOS_NOACK_BYTE_OFFSET      0x00000180      /* ??? */
+#define AR5K_QOS_NOACK_BYTE_OFFSET_S    7
+
+/*
+ * PHY error filter register
+ */
+#define AR5K_PHY_ERR_FIL                0x810c
+#define AR5K_PHY_ERR_FIL_RADAR          0x00000020      /* Radar signal */
+#define AR5K_PHY_ERR_FIL_OFDM           0x00020000      /* OFDM false detect (ANI) */
+#define AR5K_PHY_ERR_FIL_CCK            0x02000000      /* CCK false detect (ANI) */
+
+/*
+ * XR latency register
+ */
+#define AR5K_XRLAT_TX           0x8110
+
+/*
+ * ACK SIFS register
+ */
+#define AR5K_ACKSIFS            0x8114                  /* Register Address */
+#define AR5K_ACKSIFS_INC        0x00000000      /* ACK SIFS Increment (field) */
+
+/*
+ * MIC QoS control register (?)
+ */
+#define AR5K_MIC_QOS_CTL                0x8118                  /* Register Address */
+#define AR5K_MIC_QOS_CTL_OFF(_n)        (1 << (_n * 2))
+#define AR5K_MIC_QOS_CTL_MQ_EN          0x00010000      /* Enable MIC QoS */
+
+/*
+ * MIC QoS select register (?)
+ */
+#define AR5K_MIC_QOS_SEL                0x811c
+#define AR5K_MIC_QOS_SEL_OFF(_n)        (1 << (_n * 4))
+
+/*
+ * Misc mode control register (?)
+ */
+#define AR5K_MISC_MODE                  0x8120                  /* Register Address */
+#define AR5K_MISC_MODE_FBSSID_MATCH     0x00000001      /* Force BSSID match */
+#define AR5K_MISC_MODE_ACKSIFS_MEM      0x00000002      /* ACK SIFS memory (?) */
+#define AR5K_MISC_MODE_COMBINED_MIC     0x00000004      /* use rx/tx MIC key */
+/* more bits */
+
+/*
+ * OFDM Filter counter
+ */
+#define AR5K_OFDM_FIL_CNT               0x8124
+
+/*
+ * CCK Filter counter
+ */
+#define AR5K_CCK_FIL_CNT                0x8128
+
+/*
+ * PHY Error Counters (?)
+ */
+#define AR5K_PHYERR_CNT1                0x812c
+#define AR5K_PHYERR_CNT1_MASK           0x8130
+
+#define AR5K_PHYERR_CNT2                0x8134
+#define AR5K_PHYERR_CNT2_MASK           0x8138
+
+/*
+ * TSF Threshold register (?)
+ */
+#define AR5K_TSF_THRES                  0x813c
+
+/*
+ * TODO: Wake On Wireless registers
+ * Range: 0x8147 - 0x818c
+ */
+
+/*
+ * Rate -> ACK SIFS mapping table (32 entries)
+ */
+#define AR5K_RATE_ACKSIFS_BASE          0x8680                  /* Register Address */
+#define AR5K_RATE_ACKSIFS(_n)           (AR5K_RATE_ACKSIFS_BSE + ((_n) << 2))
+#define AR5K_RATE_ACKSIFS_NORMAL        0x00000001      /* Normal SIFS (field) */
+#define AR5K_RATE_ACKSIFS_TURBO         0x00000400      /* Turbo SIFS (field) */
+
+/*
+ * Rate -> duration mapping table (32 entries)
+ */
+#define AR5K_RATE_DUR_BASE              0x8700
+#define AR5K_RATE_DUR(_n)               (AR5K_RATE_DUR_BASE + ((_n) << 2))
+
+/*
+ * Rate -> db mapping table
+ * (8 entries, each one has 4 8bit fields)
+ */
+#define AR5K_RATE2DB_BASE               0x87c0
+#define AR5K_RATE2DB(_n)                (AR5K_RATE2DB_BASE + ((_n) << 2))
+
+/*
+ * db -> Rate mapping table
+ * (8 entries, each one has 4 8bit fields)
+ */
+#define AR5K_DB2RATE_BASE               0x87e0
+#define AR5K_DB2RATE(_n)                (AR5K_DB2RATE_BASE + ((_n) << 2))
+
+/*===5212 end===*/
+
+/*
+ * Key table (WEP) register
+ */
+#define AR5K_KEYTABLE_0_5210            0x9000
+#define AR5K_KEYTABLE_0_5211            0x8800
+#define AR5K_KEYTABLE_5210(_n)          (AR5K_KEYTABLE_0_5210 + ((_n) << 5))
+#define AR5K_KEYTABLE_5211(_n)          (AR5K_KEYTABLE_0_5211 + ((_n) << 5))
+#define AR5K_KEYTABLE(_n)               (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_KEYTABLE_5210(_n) : AR5K_KEYTABLE_5211(_n))
+#define AR5K_KEYTABLE_OFF(_n, x)        (AR5K_KEYTABLE(_n) + (x << 2))
+#define AR5K_KEYTABLE_TYPE(_n)          AR5K_KEYTABLE_OFF(_n, 5)
+#define AR5K_KEYTABLE_TYPE_40           0x00000000
+#define AR5K_KEYTABLE_TYPE_104          0x00000001
+#define AR5K_KEYTABLE_TYPE_128          0x00000003
+#define AR5K_KEYTABLE_TYPE_TKIP         0x00000004      /* [5212+] */
+#define AR5K_KEYTABLE_TYPE_AES          0x00000005      /* [5211+] */
+#define AR5K_KEYTABLE_TYPE_CCM          0x00000006      /* [5212+] */
+#define AR5K_KEYTABLE_TYPE_NULL         0x00000007      /* [5211+] */
+#define AR5K_KEYTABLE_ANTENNA           0x00000008      /* [5212+] */
+#define AR5K_KEYTABLE_MAC0(_n)          AR5K_KEYTABLE_OFF(_n, 6)
+#define AR5K_KEYTABLE_MAC1(_n)          AR5K_KEYTABLE_OFF(_n, 7)
+#define AR5K_KEYTABLE_VALID             0x00008000
+
+/* If key type is TKIP and MIC is enabled
+ * MIC key goes in offset entry + 64 */
+#define AR5K_KEYTABLE_MIC_OFFSET        64
+
+/* WEP 40-bit   = 40-bit  entered key + 24 bit IV = 64-bit
+ * WEP 104-bit  = 104-bit entered key + 24-bit IV = 128-bit
+ * WEP 128-bit  = 128-bit entered key + 24 bit IV = 152-bit
+ *
+ * Some vendors have introduced bigger WEP keys to address
+ * security vulnerabilities in WEP. This includes:
+ *
+ * WEP 232-bit = 232-bit entered key + 24 bit IV = 256-bit
+ *
+ * We can expand this if we find ar5k Atheros cards with a larger
+ * key table size.
+ */
+#define AR5K_KEYTABLE_SIZE_5210         64
+#define AR5K_KEYTABLE_SIZE_5211         128
+#define AR5K_KEYTABLE_SIZE              (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211)
+
+
+/*===PHY REGISTERS===*/
+
+/*
+ * PHY registers start
+ */
+#define AR5K_PHY_BASE                   0x9800
+#define AR5K_PHY(_n)                    (AR5K_PHY_BASE + ((_n) << 2))
+
+/*
+ * TST_2 (Misc config parameters)
+ */
+#define AR5K_PHY_TST2                   0x9800                  /* Register Address */
+#define AR5K_PHY_TST2_TRIG_SEL          0x00000007      /* Trigger select (?)*/
+#define AR5K_PHY_TST2_TRIG              0x00000010      /* Trigger (?) */
+#define AR5K_PHY_TST2_CBUS_MODE         0x00000060      /* Cardbus mode (?) */
+#define AR5K_PHY_TST2_CLK32             0x00000400      /* CLK_OUT is CLK32 (32Khz external) */
+#define AR5K_PHY_TST2_CHANCOR_DUMP_EN   0x00000800      /* Enable Chancor dump (?) */
+#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000      /* Even Chancor dump (?) */
+#define AR5K_PHY_TST2_RFSILENT_EN       0x00002000      /* Enable RFSILENT */
+#define AR5K_PHY_TST2_ALT_RFDATA        0x00004000      /* Alternate RFDATA (5-2GHz switch ?) */
+#define AR5K_PHY_TST2_MINI_OBS_EN       0x00008000      /* Enable mini OBS (?) */
+#define AR5K_PHY_TST2_RX2_IS_RX5_INV    0x00010000      /* 2GHz rx path is the 5GHz path inverted (?) */
+#define AR5K_PHY_TST2_SLOW_CLK160       0x00020000      /* Slow CLK160 (?) */
+#define AR5K_PHY_TST2_AGC_OBS_SEL_3     0x00040000      /* AGC OBS Select 3 (?) */
+#define AR5K_PHY_TST2_BBB_OBS_SEL       0x00080000      /* BB OBS Select (field ?) */
+#define AR5K_PHY_TST2_ADC_OBS_SEL       0x00800000      /* ADC OBS Select (field ?) */
+#define AR5K_PHY_TST2_RX_CLR_SEL        0x08000000      /* RX Clear Select (?) */
+#define AR5K_PHY_TST2_FORCE_AGC_CLR     0x10000000      /* Force AGC clear (?) */
+#define AR5K_PHY_SHIFT_2GHZ             0x00004007      /* Used to access 2GHz radios */
+#define AR5K_PHY_SHIFT_5GHZ             0x00000007      /* Used to access 5GHz radios (default) */
+
+/*
+ * PHY frame control register [5110] /turbo mode register [5111+]
+ *
+ * There is another frame control register for [5111+]
+ * at address 0x9944 (see below) but the 2 first flags
+ * are common here between 5110 frame control register
+ * and [5111+] turbo mode register, so this also works as
+ * a "turbo mode register" for 5110. We treat this one as
+ * a frame control register for 5110 below.
+ */
+#define AR5K_PHY_TURBO                  0x9804                  /* Register Address */
+#define AR5K_PHY_TURBO_MODE             0x00000001      /* Enable turbo mode */
+#define AR5K_PHY_TURBO_SHORT            0x00000002      /* Set short symbols to turbo mode */
+#define AR5K_PHY_TURBO_MIMO             0x00000004      /* Set turbo for mimo mimo */
+
+/*
+ * PHY agility command register
+ * (aka TST_1)
+ */
+#define AR5K_PHY_AGC                    0x9808                  /* Register Address */
+#define AR5K_PHY_TST1                   0x9808
+#define AR5K_PHY_AGC_DISABLE            0x08000000      /* Disable AGC to A2 (?)*/
+#define AR5K_PHY_TST1_TXHOLD            0x00003800      /* Set tx hold (?) */
+#define AR5K_PHY_TST1_TXSRC_SRC         0x00000002      /* Used with bit 7 (?) */
+#define AR5K_PHY_TST1_TXSRC_SRC_S       1
+#define AR5K_PHY_TST1_TXSRC_ALT         0x00000080      /* Set input to tsdac (?) */
+#define AR5K_PHY_TST1_TXSRC_ALT_S       7
+
+
+/*
+ * PHY timing register 3 [5112+]
+ */
+#define AR5K_PHY_TIMING_3               0x9814
+#define AR5K_PHY_TIMING_3_DSC_MAN       0xfffe0000
+#define AR5K_PHY_TIMING_3_DSC_MAN_S     17
+#define AR5K_PHY_TIMING_3_DSC_EXP       0x0001e000
+#define AR5K_PHY_TIMING_3_DSC_EXP_S     13
+
+/*
+ * PHY chip revision register
+ */
+#define AR5K_PHY_CHIP_ID                0x9818
+
+/*
+ * PHY activation register
+ */
+#define AR5K_PHY_ACT                    0x981c                  /* Register Address */
+#define AR5K_PHY_ACT_ENABLE             0x00000001      /* Activate PHY */
+#define AR5K_PHY_ACT_DISABLE            0x00000002      /* Deactivate PHY */
+
+/*
+ * PHY RF control registers
+ */
+#define AR5K_PHY_RF_CTL2                0x9824                  /* Register Address */
+#define AR5K_PHY_RF_CTL2_TXF2TXD_START  0x0000000f      /* TX frame to TX data start */
+#define AR5K_PHY_RF_CTL2_TXF2TXD_START_S        0
+
+#define AR5K_PHY_RF_CTL3                0x9828                  /* Register Address */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON    0x0000ff00      /* TX end to XLNA on */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S  8
+
+#define AR5K_PHY_ADC_CTL                        0x982c
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF          0x00000003
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S        0
+#define AR5K_PHY_ADC_CTL_PWD_DAC_OFF            0x00002000
+#define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF       0x00004000
+#define AR5K_PHY_ADC_CTL_PWD_ADC_OFF            0x00008000
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON           0x00030000
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S         16
+
+#define AR5K_PHY_RF_CTL4                0x9834                  /* Register Address */
+#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON   0x00000001      /* TX frame to XPA A on (field) */
+#define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON   0x00000100      /* TX frame to XPA B on (field) */
+#define AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF  0x00010000      /* TX end to XPA A off (field) */
+#define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF  0x01000000      /* TX end to XPA B off (field) */
+
+/*
+ * Pre-Amplifier control register
+ * (XPA -> external pre-amplifier)
+ */
+#define AR5K_PHY_PA_CTL                 0x9838                  /* Register Address */
+#define AR5K_PHY_PA_CTL_XPA_A_HI        0x00000001      /* XPA A high (?) */
+#define AR5K_PHY_PA_CTL_XPA_B_HI        0x00000002      /* XPA B high (?) */
+#define AR5K_PHY_PA_CTL_XPA_A_EN        0x00000004      /* Enable XPA A */
+#define AR5K_PHY_PA_CTL_XPA_B_EN        0x00000008      /* Enable XPA B */
+
+/*
+ * PHY settling register
+ */
+#define AR5K_PHY_SETTLING               0x9844                  /* Register Address */
+#define AR5K_PHY_SETTLING_AGC           0x0000007f      /* AGC settling time */
+#define AR5K_PHY_SETTLING_AGC_S         0
+#define AR5K_PHY_SETTLING_SWITCH        0x00003f80      /* Switch settlig time */
+#define AR5K_PHY_SETTLING_SWITCH_S      7
+
+/*
+ * PHY Gain registers
+ */
+#define AR5K_PHY_GAIN                   0x9848                  /* Register Address */
+#define AR5K_PHY_GAIN_TXRX_ATTEN        0x0003f000      /* TX-RX Attenuation */
+#define AR5K_PHY_GAIN_TXRX_ATTEN_S      12
+#define AR5K_PHY_GAIN_TXRX_RF_MAX       0x007c0000
+#define AR5K_PHY_GAIN_TXRX_RF_MAX_S     18
+
+#define AR5K_PHY_GAIN_OFFSET            0x984c                  /* Register Address */
+#define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG  0x00020000      /* RX-TX flag (?) */
+
+/*
+ * Desired ADC/PGA size register
+ * (for more infos read ANI patent)
+ */
+#define AR5K_PHY_DESIRED_SIZE           0x9850                  /* Register Address */
+#define AR5K_PHY_DESIRED_SIZE_ADC       0x000000ff      /* ADC desired size */
+#define AR5K_PHY_DESIRED_SIZE_ADC_S     0
+#define AR5K_PHY_DESIRED_SIZE_PGA       0x0000ff00      /* PGA desired size */
+#define AR5K_PHY_DESIRED_SIZE_PGA_S     8
+#define AR5K_PHY_DESIRED_SIZE_TOT       0x0ff00000      /* Total desired size */
+#define AR5K_PHY_DESIRED_SIZE_TOT_S     20
+
+/*
+ * PHY signal register
+ * (for more infos read ANI patent)
+ */
+#define AR5K_PHY_SIG                    0x9858                  /* Register Address */
+#define AR5K_PHY_SIG_FIRSTEP            0x0003f000      /* FIRSTEP */
+#define AR5K_PHY_SIG_FIRSTEP_S          12
+#define AR5K_PHY_SIG_FIRPWR             0x03fc0000      /* FIPWR */
+#define AR5K_PHY_SIG_FIRPWR_S           18
+
+/*
+ * PHY coarse agility control register
+ * (for more infos read ANI patent)
+ */
+#define AR5K_PHY_AGCCOARSE              0x985c                  /* Register Address */
+#define AR5K_PHY_AGCCOARSE_LO           0x00007f80      /* AGC Coarse low */
+#define AR5K_PHY_AGCCOARSE_LO_S         7
+#define AR5K_PHY_AGCCOARSE_HI           0x003f8000      /* AGC Coarse high */
+#define AR5K_PHY_AGCCOARSE_HI_S         15
+
+/*
+ * PHY agility control register
+ */
+#define AR5K_PHY_AGCCTL                 0x9860                  /* Register address */
+#define AR5K_PHY_AGCCTL_CAL             0x00000001      /* Enable PHY calibration */
+#define AR5K_PHY_AGCCTL_NF              0x00000002      /* Enable Noise Floor calibration */
+#define AR5K_PHY_AGCCTL_NF_EN           0x00008000      /* Enable nf calibration to happen (?) */
+#define AR5K_PHY_AGCCTL_NF_NOUPDATE     0x00020000      /* Don't update nf automaticaly */
+
+/*
+ * PHY noise floor status register
+ */
+#define AR5K_PHY_NF                     0x9864                  /* Register address */
+#define AR5K_PHY_NF_M                   0x000001ff      /* Noise floor mask */
+#define AR5K_PHY_NF_ACTIVE              0x00000100      /* Noise floor calibration still active */
+#define AR5K_PHY_NF_RVAL(_n)            (((_n) >> 19) & AR5K_PHY_NF_M)
+#define AR5K_PHY_NF_AVAL(_n)            (-((_n) ^ AR5K_PHY_NF_M) + 1)
+#define AR5K_PHY_NF_SVAL(_n)            (((_n) & AR5K_PHY_NF_M) | (1 << 9))
+#define AR5K_PHY_NF_THRESH62            0x0007f000      /* Thresh62 -check ANI patent- (field) */
+#define AR5K_PHY_NF_THRESH62_S          12
+#define AR5K_PHY_NF_MINCCA_PWR          0x0ff80000      /* ??? */
+#define AR5K_PHY_NF_MINCCA_PWR_S        19
+
+/*
+ * PHY ADC saturation register [5110]
+ */
+#define AR5K_PHY_ADCSAT                 0x9868
+#define AR5K_PHY_ADCSAT_ICNT            0x0001f800
+#define AR5K_PHY_ADCSAT_ICNT_S          11
+#define AR5K_PHY_ADCSAT_THR             0x000007e0
+#define AR5K_PHY_ADCSAT_THR_S           5
+
+/*
+ * PHY Weak ofdm signal detection threshold registers (ANI) [5212+]
+ */
+
+/* High thresholds */
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR             0x9868
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT    0x0000001f
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S  0
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1          0x00fe0000
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S        17
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2          0x7f000000
+#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S        24
+
+/* Low thresholds */
+#define AR5K_PHY_WEAK_OFDM_LOW_THR              0x986c
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN   0x00000001
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT     0x00003f00
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S   8
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1           0x001fc000
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S         14
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2           0x0fe00000
+#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S         21
+
+
+/*
+ * PHY sleep registers [5112+]
+ */
+#define AR5K_PHY_SCR                    0x9870
+
+#define AR5K_PHY_SLMT                   0x9874
+#define AR5K_PHY_SLMT_32MHZ             0x0000007f
+
+#define AR5K_PHY_SCAL                   0x9878
+#define AR5K_PHY_SCAL_32MHZ             0x0000000e
+#define AR5K_PHY_SCAL_32MHZ_2417        0x0000000a
+#define AR5K_PHY_SCAL_32MHZ_HB63        0x00000032
+
+/*
+ * PHY PLL (Phase Locked Loop) control register
+ */
+#define AR5K_PHY_PLL                    0x987c
+#define AR5K_PHY_PLL_20MHZ              0x00000013      /* For half rate (?) */
+/* 40MHz -> 5GHz band */
+#define AR5K_PHY_PLL_40MHZ_5211         0x00000018
+#define AR5K_PHY_PLL_40MHZ_5212         0x000000aa
+#define AR5K_PHY_PLL_40MHZ_5413         0x00000004
+#define AR5K_PHY_PLL_40MHZ              (ah->ah_version == AR5K_AR5211 ? \
+                                        AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212)
+/* 44MHz -> 2.4GHz band */
+#define AR5K_PHY_PLL_44MHZ_5211         0x00000019
+#define AR5K_PHY_PLL_44MHZ_5212         0x000000ab
+#define AR5K_PHY_PLL_44MHZ              (ah->ah_version == AR5K_AR5211 ? \
+                                        AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212)
+
+#define AR5K_PHY_PLL_RF5111             0x00000000
+#define AR5K_PHY_PLL_RF5112             0x00000040
+#define AR5K_PHY_PLL_HALF_RATE          0x00000100
+#define AR5K_PHY_PLL_QUARTER_RATE       0x00000200
+
+/*
+ * RF Buffer register
+ *
+ * It's obvious from the code that 0x989c is the buffer register but
+ * for the other special registers that we write to after sending each
+ * packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers
+ * for now. It's interesting that they are also used for some other operations.
+ */
+
+#define AR5K_RF_BUFFER                  0x989c
+#define AR5K_RF_BUFFER_CONTROL_0        0x98c0  /* Channel on 5110 */
+#define AR5K_RF_BUFFER_CONTROL_1        0x98c4  /* Bank 7 on 5112 */
+#define AR5K_RF_BUFFER_CONTROL_2        0x98cc  /* Bank 7 on 5111 */
+
+#define AR5K_RF_BUFFER_CONTROL_3        0x98d0  /* Bank 2 on 5112 */
+                                                /* Channel set on 5111 */
+                                                /* Used to read radio revision*/
+
+#define AR5K_RF_BUFFER_CONTROL_4        0x98d4  /* RF Stage register on 5110 */
+                                                /* Bank 0,1,2,6 on 5111 */
+                                                /* Bank 1 on 5112 */
+                                                /* Used during activation on 5111 */
+
+#define AR5K_RF_BUFFER_CONTROL_5        0x98d8  /* Bank 3 on 5111 */
+                                                /* Used during activation on 5111 */
+                                                /* Channel on 5112 */
+                                                /* Bank 6 on 5112 */
+
+#define AR5K_RF_BUFFER_CONTROL_6        0x98dc  /* Bank 3 on 5112 */
+
+/*
+ * PHY RF stage register [5210]
+ */
+#define AR5K_PHY_RFSTG                  0x98d4
+#define AR5K_PHY_RFSTG_DISABLE          0x00000021
+
+/*
+ * BIN masks (?)
+ */
+#define AR5K_PHY_BIN_MASK_1     0x9900
+#define AR5K_PHY_BIN_MASK_2     0x9904
+#define AR5K_PHY_BIN_MASK_3     0x9908
+
+#define AR5K_PHY_BIN_MASK_CTL           0x990c
+#define AR5K_PHY_BIN_MASK_CTL_MASK_4    0x00003fff
+#define AR5K_PHY_BIN_MASK_CTL_MASK_4_S  0
+#define AR5K_PHY_BIN_MASK_CTL_RATE      0xff000000
+#define AR5K_PHY_BIN_MASK_CTL_RATE_S    24
+
+/*
+ * PHY Antenna control register
+ */
+#define AR5K_PHY_ANT_CTL                0x9910                  /* Register Address */
+#define AR5K_PHY_ANT_CTL_TXRX_EN        0x00000001      /* Enable TX/RX (?) */
+#define AR5K_PHY_ANT_CTL_SECTORED_ANT   0x00000004      /* Sectored Antenna */
+#define AR5K_PHY_ANT_CTL_HITUNE5        0x00000008      /* Hitune5 (?) */
+#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE   0x000003f0      /* Switch table idle (?) */
+#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE_S 4
+
+/*
+ * PHY receiver delay register [5111+]
+ */
+#define AR5K_PHY_RX_DELAY               0x9914                  /* Register Address */
+#define AR5K_PHY_RX_DELAY_M             0x00003fff      /* Mask for RX activate to receive delay (/100ns) */
+
+/*
+ * PHY max rx length register (?) [5111]
+ */
+#define AR5K_PHY_MAX_RX_LEN             0x991c
+
+/*
+ * PHY timing register 4
+ * I(nphase)/Q(adrature) calibration register [5111+]
+ */
+#define AR5K_PHY_IQ                     0x9920                  /* Register Address */
+#define AR5K_PHY_IQ_CORR_Q_Q_COFF       0x0000001f      /* Mask for q correction info */
+#define AR5K_PHY_IQ_CORR_Q_I_COFF       0x000007e0      /* Mask for i correction info */
+#define AR5K_PHY_IQ_CORR_Q_I_COFF_S     5
+#define AR5K_PHY_IQ_CORR_ENABLE         0x00000800      /* Enable i/q correction */
+#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX     0x0000f000      /* Mask for max number of samples in log scale */
+#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S   12
+#define AR5K_PHY_IQ_RUN                 0x00010000      /* Run i/q calibration */
+#define AR5K_PHY_IQ_USE_PT_DF           0x00020000      /* Use pilot track df (?) */
+#define AR5K_PHY_IQ_EARLY_TRIG_THR      0x00200000      /* Early trigger threshold (?) (field) */
+#define AR5K_PHY_IQ_PILOT_MASK_EN       0x10000000      /* Enable pilot mask (?) */
+#define AR5K_PHY_IQ_CHAN_MASK_EN        0x20000000      /* Enable channel mask (?) */
+#define AR5K_PHY_IQ_SPUR_FILT_EN        0x40000000      /* Enable spur filter */
+#define AR5K_PHY_IQ_SPUR_RSSI_EN        0x80000000      /* Enable spur rssi */
+
+/*
+ * PHY timing register 5
+ * OFDM Self-correlator Cyclic RSSI threshold params
+ * (Check out bb_cycpwr_thr1 on ANI patent)
+ */
+#define AR5K_PHY_OFDM_SELFCORR                  0x9924                  /* Register Address */
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN    0x00000001      /* Enable cyclic RSSI thr 1 */
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1       0x000000fe      /* Mask for Cyclic RSSI threshold 1 */
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S     1
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3       0x00000100      /* Cyclic RSSI threshold 3 (field) (?) */
+#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN    0x00008000      /* Enable 1A RSSI threshold (?) */
+#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR       0x00010000      /* 1A RSSI threshold (field) (?) */
+#define AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI    0x00800000      /* Long sc threshold hi rssi (?) */
+
+/*
+ * PHY-only warm reset register
+ */
+#define AR5K_PHY_WARM_RESET             0x9928
+
+/*
+ * PHY-only control register
+ */
+#define AR5K_PHY_CTL                    0x992c                  /* Register Address */
+#define AR5K_PHY_CTL_RX_DRAIN_RATE      0x00000001      /* RX drain rate (?) */
+#define AR5K_PHY_CTL_LATE_TX_SIG_SYM    0x00000002      /* Late tx signal symbol (?) */
+#define AR5K_PHY_CTL_GEN_SCRAMBLER      0x00000004      /* Generate scrambler */
+#define AR5K_PHY_CTL_TX_ANT_SEL         0x00000008      /* TX antenna select */
+#define AR5K_PHY_CTL_TX_ANT_STATIC      0x00000010      /* Static TX antenna */
+#define AR5K_PHY_CTL_RX_ANT_SEL         0x00000020      /* RX antenna select */
+#define AR5K_PHY_CTL_RX_ANT_STATIC      0x00000040      /* Static RX antenna */
+#define AR5K_PHY_CTL_LOW_FREQ_SLE_EN    0x00000080      /* Enable low freq sleep */
+
+/*
+ * PHY PAPD probe register [5111+]
+ */
+#define AR5K_PHY_PAPD_PROBE             0x9930
+#define AR5K_PHY_PAPD_PROBE_SH_HI_PAR   0x00000001
+#define AR5K_PHY_PAPD_PROBE_PCDAC_BIAS  0x00000002
+#define AR5K_PHY_PAPD_PROBE_COMP_GAIN   0x00000040
+#define AR5K_PHY_PAPD_PROBE_TXPOWER     0x00007e00
+#define AR5K_PHY_PAPD_PROBE_TXPOWER_S   9
+#define AR5K_PHY_PAPD_PROBE_TX_NEXT     0x00008000
+#define AR5K_PHY_PAPD_PROBE_PREDIST_EN  0x00010000
+#define AR5K_PHY_PAPD_PROBE_TYPE        0x01800000      /* [5112+] */
+#define AR5K_PHY_PAPD_PROBE_TYPE_S      23
+#define AR5K_PHY_PAPD_PROBE_TYPE_OFDM   0
+#define AR5K_PHY_PAPD_PROBE_TYPE_XR     1
+#define AR5K_PHY_PAPD_PROBE_TYPE_CCK    2
+#define AR5K_PHY_PAPD_PROBE_GAINF       0xfe000000
+#define AR5K_PHY_PAPD_PROBE_GAINF_S     25
+#define AR5K_PHY_PAPD_PROBE_INI_5111    0x00004883      /* [5212+] */
+#define AR5K_PHY_PAPD_PROBE_INI_5112    0x00004882      /* [5212+] */
+
+/*
+ * PHY TX rate power registers [5112+]
+ */
+#define AR5K_PHY_TXPOWER_RATE1                  0x9934
+#define AR5K_PHY_TXPOWER_RATE2                  0x9938
+#define AR5K_PHY_TXPOWER_RATE_MAX               0x993c
+#define AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE    0x00000040
+#define AR5K_PHY_TXPOWER_RATE3                  0xa234
+#define AR5K_PHY_TXPOWER_RATE4                  0xa238
+
+/*
+ * PHY frame control register [5111+]
+ */
+#define AR5K_PHY_FRAME_CTL_5210         0x9804
+#define AR5K_PHY_FRAME_CTL_5211         0x9944
+#define AR5K_PHY_FRAME_CTL              (ah->ah_version == AR5K_AR5210 ? \
+                                        AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211)
+/*---[5111+]---*/
+#define AR5K_PHY_FRAME_CTL_TX_CLIP      0x00000038      /* Mask for tx clip (?) */
+#define AR5K_PHY_FRAME_CTL_TX_CLIP_S    3
+#define AR5K_PHY_FRAME_CTL_PREP_CHINFO  0x00010000      /* Prepend chan info */
+#define AR5K_PHY_FRAME_CTL_EMU          0x80000000
+#define AR5K_PHY_FRAME_CTL_EMU_S        31
+/*---[5110/5111]---*/
+#define AR5K_PHY_FRAME_CTL_TIMING_ERR   0x01000000      /* PHY timing error */
+#define AR5K_PHY_FRAME_CTL_PARITY_ERR   0x02000000      /* Parity error */
+#define AR5K_PHY_FRAME_CTL_ILLRATE_ERR  0x04000000      /* Illegal rate */
+#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR   0x08000000      /* Illegal length */
+#define AR5K_PHY_FRAME_CTL_SERVICE_ERR  0x20000000
+#define AR5K_PHY_FRAME_CTL_TXURN_ERR    0x40000000      /* TX underrun */
+#define AR5K_PHY_FRAME_CTL_INI          AR5K_PHY_FRAME_CTL_SERVICE_ERR | \
+                        AR5K_PHY_FRAME_CTL_TXURN_ERR | \
+                        AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \
+                        AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \
+                        AR5K_PHY_FRAME_CTL_PARITY_ERR | \
+                        AR5K_PHY_FRAME_CTL_TIMING_ERR
+
+/*
+ * PHY Tx Power adjustment register [5212A+]
+ */
+#define AR5K_PHY_TX_PWR_ADJ                     0x994c
+#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA      0x00000fc0
+#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA_S    6
+#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX     0x00fc0000
+#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX_S   18
+
+/*
+ * PHY radar detection register [5111+]
+ */
+#define AR5K_PHY_RADAR                  0x9954
+#define AR5K_PHY_RADAR_ENABLE           0x00000001
+#define AR5K_PHY_RADAR_DISABLE          0x00000000
+#define AR5K_PHY_RADAR_INBANDTHR        0x0000003e      /* Inband threshold
+                                                        5-bits, units unknown {0..31}
+                                                        (? MHz ?) */
+#define AR5K_PHY_RADAR_INBANDTHR_S      1
+
+#define AR5K_PHY_RADAR_PRSSI_THR        0x00000fc0      /* Pulse RSSI/SNR threshold
+                                                        6-bits, dBm range {0..63}
+                                                        in dBm units. */
+#define AR5K_PHY_RADAR_PRSSI_THR_S      6
+
+#define AR5K_PHY_RADAR_PHEIGHT_THR      0x0003f000      /* Pulse height threshold
+                                                        6-bits, dBm range {0..63}
+                                                        in dBm units. */
+#define AR5K_PHY_RADAR_PHEIGHT_THR_S    12
+
+#define AR5K_PHY_RADAR_RSSI_THR         0x00fc0000      /* Radar RSSI/SNR threshold.
+                                                        6-bits, dBm range {0..63}
+                                                        in dBm units. */
+#define AR5K_PHY_RADAR_RSSI_THR_S       18
+
+#define AR5K_PHY_RADAR_FIRPWR_THR       0x7f000000      /* Finite Impulse Response
+                                                        filter power out threshold.
+                                                        7-bits, standard power range
+                                                        {0..127} in 1/2 dBm units. */
+#define AR5K_PHY_RADAR_FIRPWR_THRS      24
+
+/*
+ * PHY antenna switch table registers
+ */
+#define AR5K_PHY_ANT_SWITCH_TABLE_0     0x9960
+#define AR5K_PHY_ANT_SWITCH_TABLE_1     0x9964
+
+/*
+ * PHY Noise floor threshold
+ */
+#define AR5K_PHY_NFTHRES                0x9968
+
+/*
+ * Sigma Delta register (?) [5213]
+ */
+#define AR5K_PHY_SIGMA_DELTA            0x996C
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL    0x00000003
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S  0
+#define AR5K_PHY_SIGMA_DELTA_FILT2      0x000000f8
+#define AR5K_PHY_SIGMA_DELTA_FILT2_S    3
+#define AR5K_PHY_SIGMA_DELTA_FILT1      0x00001f00
+#define AR5K_PHY_SIGMA_DELTA_FILT1_S    8
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP   0x01ffe000
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13
+
+/*
+ * RF restart register [5112+] (?)
+ */
+#define AR5K_PHY_RESTART                0x9970          /* restart */
+#define AR5K_PHY_RESTART_DIV_GC         0x001c0000      /* Fast diversity gc_limit (?) */
+#define AR5K_PHY_RESTART_DIV_GC_S       18
+
+/*
+ * RF Bus access request register (for synth-oly channel switching)
+ */
+#define AR5K_PHY_RFBUS_REQ              0x997C
+#define AR5K_PHY_RFBUS_REQ_REQUEST      0x00000001
+
+/*
+ * Spur mitigation masks (?)
+ */
+#define AR5K_PHY_TIMING_7               0x9980
+#define AR5K_PHY_TIMING_8               0x9984
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2          0x000fffff
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S        0
+
+#define AR5K_PHY_BIN_MASK2_1            0x9988
+#define AR5K_PHY_BIN_MASK2_2            0x998c
+#define AR5K_PHY_BIN_MASK2_3            0x9990
+
+#define AR5K_PHY_BIN_MASK2_4            0x9994
+#define AR5K_PHY_BIN_MASK2_4_MASK_4     0x00003fff
+#define AR5K_PHY_BIN_MASK2_4_MASK_4_S   0
+
+#define AR5K_PHY_TIMING_9                       0x9998
+#define AR5K_PHY_TIMING_10                      0x999c
+#define AR5K_PHY_TIMING_10_PILOT_MASK_2         0x000fffff
+#define AR5K_PHY_TIMING_10_PILOT_MASK_2_S       0
+
+/*
+ * Spur mitigation control
+ */
+#define AR5K_PHY_TIMING_11                      0x99a0          /* Register address */
+#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE     0x000fffff      /* Spur delta phase */
+#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE_S   0
+#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD         0x3ff00000      /* Freq sigma delta */
+#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD_S       20
+#define AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC      0x40000000      /* Spur filter in AGC detector */
+#define AR5K_PHY_TIMING_11_USE_SPUR_IN_SELFCOR  0x80000000      /* Spur filter in OFDM self correlator */
+
+/*
+ * Gain tables
+ */
+#define AR5K_BB_GAIN_BASE               0x9b00  /* BaseBand Amplifier Gain table base address */
+#define AR5K_BB_GAIN(_n)                (AR5K_BB_GAIN_BASE + ((_n) << 2))
+#define AR5K_RF_GAIN_BASE               0x9a00  /* RF Amplrifier Gain table base address */
+#define AR5K_RF_GAIN(_n)                (AR5K_RF_GAIN_BASE + ((_n) << 2))
+
+/*
+ * PHY timing IQ calibration result register [5111+]
+ */
+#define AR5K_PHY_IQRES_CAL_PWR_I        0x9c10  /* I (Inphase) power value */
+#define AR5K_PHY_IQRES_CAL_PWR_Q        0x9c14  /* Q (Quadrature) power value */
+#define AR5K_PHY_IQRES_CAL_CORR         0x9c18  /* I/Q Correlation */
+
+/*
+ * PHY current RSSI register [5111+]
+ */
+#define AR5K_PHY_CURRENT_RSSI   0x9c1c
+
+/*
+ * PHY RF Bus grant register
+ */
+#define AR5K_PHY_RFBUS_GRANT    0x9c20
+#define AR5K_PHY_RFBUS_GRANT_OK 0x00000001
+
+/*
+ * PHY ADC test register
+ */
+#define AR5K_PHY_ADC_TEST       0x9c24
+#define AR5K_PHY_ADC_TEST_I     0x00000001
+#define AR5K_PHY_ADC_TEST_Q     0x00000200
+
+/*
+ * PHY DAC test register
+ */
+#define AR5K_PHY_DAC_TEST       0x9c28
+#define AR5K_PHY_DAC_TEST_I     0x00000001
+#define AR5K_PHY_DAC_TEST_Q     0x00000200
+
+/*
+ * PHY PTAT register (?)
+ */
+#define AR5K_PHY_PTAT           0x9c2c
+
+/*
+ * PHY Illegal TX rate register [5112+]
+ */
+#define AR5K_PHY_BAD_TX_RATE    0x9c30
+
+/*
+ * PHY SPUR Power register [5112+]
+ */
+#define AR5K_PHY_SPUR_PWR       0x9c34                  /* Register Address */
+#define AR5K_PHY_SPUR_PWR_I     0x00000001      /* SPUR Power estimate for I (field) */
+#define AR5K_PHY_SPUR_PWR_Q     0x00000100      /* SPUR Power estimate for Q (field) */
+#define AR5K_PHY_SPUR_PWR_FILT  0x00010000      /* Power with SPUR removed (field) */
+
+/*
+ * PHY Channel status register [5112+] (?)
+ */
+#define AR5K_PHY_CHAN_STATUS            0x9c38
+#define AR5K_PHY_CHAN_STATUS_BT_ACT     0x00000001
+#define AR5K_PHY_CHAN_STATUS_RX_CLR_RAW 0x00000002
+#define AR5K_PHY_CHAN_STATUS_RX_CLR_MAC 0x00000004
+#define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008
+
+/*
+ * Heavy clip enable register
+ */
+#define AR5K_PHY_HEAVY_CLIP_ENABLE      0x99e0
+
+/*
+ * PHY clock sleep registers [5112+]
+ */
+#define AR5K_PHY_SCLOCK                 0x99f0
+#define AR5K_PHY_SCLOCK_32MHZ           0x0000000c
+#define AR5K_PHY_SDELAY                 0x99f4
+#define AR5K_PHY_SDELAY_32MHZ           0x000000ff
+#define AR5K_PHY_SPENDING               0x99f8
+
+
+/*
+ * PHY PAPD I (power?) table (?)
+ * (92! entries)
+ */
+#define AR5K_PHY_PAPD_I_BASE    0xa000
+#define AR5K_PHY_PAPD_I(_n)     (AR5K_PHY_PAPD_I_BASE + ((_n) << 2))
+
+/*
+ * PHY PCDAC TX power table
+ */
+#define AR5K_PHY_PCDAC_TXPOWER_BASE     0xa180
+#define AR5K_PHY_PCDAC_TXPOWER(_n)      (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2))
+
+/*
+ * PHY mode register [5111+]
+ */
+#define AR5K_PHY_MODE                   0x0a200                 /* Register Address */
+#define AR5K_PHY_MODE_MOD               0x00000001      /* PHY Modulation bit */
+#define AR5K_PHY_MODE_MOD_OFDM          0
+#define AR5K_PHY_MODE_MOD_CCK           1
+#define AR5K_PHY_MODE_FREQ              0x00000002      /* Freq mode bit */
+#define AR5K_PHY_MODE_FREQ_5GHZ         0
+#define AR5K_PHY_MODE_FREQ_2GHZ         2
+#define AR5K_PHY_MODE_MOD_DYN           0x00000004      /* Enable Dynamic OFDM/CCK mode [5112+] */
+#define AR5K_PHY_MODE_RAD               0x00000008      /* [5212+] */
+#define AR5K_PHY_MODE_RAD_RF5111        0
+#define AR5K_PHY_MODE_RAD_RF5112        8
+#define AR5K_PHY_MODE_XR                0x00000010      /* Enable XR mode [5112+] */
+#define AR5K_PHY_MODE_HALF_RATE         0x00000020      /* Enable Half rate (test) */
+#define AR5K_PHY_MODE_QUARTER_RATE      0x00000040      /* Enable Quarter rat (test) */
+
+/*
+ * PHY CCK transmit control register [5111+ (?)]
+ */
+#define AR5K_PHY_CCKTXCTL               0xa204
+#define AR5K_PHY_CCKTXCTL_WORLD         0x00000000
+#define AR5K_PHY_CCKTXCTL_JAPAN         0x00000010
+#define AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS 0x00000001
+#define AR5K_PHY_CCKTXCTK_DAC_SCALE     0x00000004
+
+/*
+ * PHY CCK Cross-correlator Barker RSSI threshold register [5212+]
+ */
+#define AR5K_PHY_CCK_CROSSCORR                  0xa208
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR     0x0000000f
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S   0
+
+/* Same address is used for antenna diversity activation */
+#define AR5K_PHY_FAST_ANT_DIV           0xa208
+#define AR5K_PHY_FAST_ANT_DIV_EN        0x00002000
+
+/*
+ * PHY 2GHz gain register [5111+]
+ */
+#define AR5K_PHY_GAIN_2GHZ                      0xa20c
+#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX          0x00fc0000
+#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S        18
+#define AR5K_PHY_GAIN_2GHZ_INI_5111             0x6480416c
+
+#define AR5K_PHY_CCK_RX_CTL_4                   0xa21c
+#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT    0x01f80000
+#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S  19
+
+#define AR5K_PHY_DAG_CCK_CTL                    0xa228
+#define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR        0x00000200
+#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR           0x0001fc00
+#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S         10
+
+#define AR5K_PHY_FAST_ADC       0xa24c
+
+#define AR5K_PHY_BLUETOOTH      0xa254
+
+/*
+ * Transmit Power Control register
+ * [2413+]
+ */
+#define AR5K_PHY_TPC_RG1                0xa258
+#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN    0x0000c000
+#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S  14
+#define AR5K_PHY_TPC_RG1_PDGAIN_1       0x00030000
+#define AR5K_PHY_TPC_RG1_PDGAIN_1_S     16
+#define AR5K_PHY_TPC_RG1_PDGAIN_2       0x000c0000
+#define AR5K_PHY_TPC_RG1_PDGAIN_2_S     18
+#define AR5K_PHY_TPC_RG1_PDGAIN_3       0x00300000
+#define AR5K_PHY_TPC_RG1_PDGAIN_3_S     20
+
+#define AR5K_PHY_TPC_RG5                        0xa26C
+#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP        0x0000000F
+#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S      0
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1     0x000003F0
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S   4
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2     0x0000FC00
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S   10
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3     0x003F0000
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S   16
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4     0x0FC00000
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S   22
+
+/*
+ * PHY PDADC Tx power table
+ */
+#define AR5K_PHY_PDADC_TXPOWER_BASE     0xa280
+#define AR5K_PHY_PDADC_TXPOWER(_n)      (AR5K_PHY_PDADC_TXPOWER_BASE + ((_n) << 2))