1 files changed, 106 insertions, 0 deletions

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index ec3f75a030d2..dd7dbf7b14d4 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -137,6 +137,110 @@ config PCMCIA_RAYCS
 comment "Wireless 802.11b ISA/PCI cards support"
         depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
 
+config IPW2100
+        tristate "Intel PRO/Wireless 2100 Network Connection"
+        depends on NET_RADIO && PCI && IEEE80211
+        select FW_LOADER
+        ---help---
+          A driver for the Intel PRO/Wireless 2100 Network 
+          Connection 802.11b wireless network adapter.
+
+          See <file:Documentation/networking/README.ipw2100> for information on
+          the capabilities currently enabled in this driver and for tips
+          for debugging issues and problems.
+
+          In order to use this driver, you will need a firmware image for it.
+          You can obtain the firmware from
+          <http://ipw2100.sf.net/>.  Once you have the firmware image, you 
+          will need to place it in /etc/firmware.
+
+          You will also very likely need the Wireless Tools in order to
+          configure your card:
+
+          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+ 
+          If you want to compile the driver as a module ( = code which can be
+          inserted in and remvoed from the running kernel whenever you want),
+          say M here and read <file:Documentation/modules.txt>.  The module
+          will be called ipw2100.ko.
+        
+config IPW2100_MONITOR
+        bool "Enable promiscuous mode"
+        depends on IPW2100
+        ---help---
+          Enables promiscuous/monitor mode support for the ipw2100 driver.
+          With this feature compiled into the driver, you can switch to 
+          promiscuous mode via the Wireless Tool's Monitor mode.  While in this
+          mode, no packets can be sent.
+
+config IPW_DEBUG
+        bool "Enable full debugging output in IPW2100 module."
+        depends on IPW2100
+        ---help---
+          This option will enable debug tracing output for the IPW2100.  
+
+          This will result in the kernel module being ~60k larger.  You can 
+          control which debug output is sent to the kernel log by setting the 
+          value in 
+
+          /sys/bus/pci/drivers/ipw2100/debug_level
+
+          This entry will only exist if this option is enabled.
+
+          If you are not trying to debug or develop the IPW2100 driver, you 
+          most likely want to say N here.
+
+config IPW2200
+        tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
+        depends on IEEE80211 && PCI
+        select FW_LOADER
+        ---help---
+          A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
+          Connection adapters. 
+
+          See <file:Documentation/networking/README.ipw2200> for 
+          information on the capabilities currently enabled in this 
+          driver and for tips for debugging issues and problems.
+
+          In order to use this driver, you will need a firmware image for it.
+          You can obtain the firmware from
+          <http://ipw2200.sf.net/>.  See the above referenced README.ipw2200 
+          for information on where to install the firmare images.
+
+          You will also very likely need the Wireless Tools in order to
+          configure your card:
+
+          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+ 
+          If you want to compile the driver as a module ( = code which can be
+          inserted in and remvoed from the running kernel whenever you want),
+          say M here and read <file:Documentation/modules.txt>.  The module
+          will be called ipw2200.ko.
+
+config IPW_DEBUG
+        bool "Enable full debugging output in IPW2200 module."
+        depends on IPW2200
+        ---help---
+          This option will enable debug tracing output for the IPW2200.  
+
+          This will result in the kernel module being ~100k larger.  You can 
+          control which debug output is sent to the kernel log by setting the 
+          value in 
+
+          /sys/bus/pci/drivers/ipw2200/debug_level
+
+          This entry will only exist if this option is enabled.
+
+          To set a value, simply echo an 8-byte hex value to the same file:
+
+          % echo 0x00000FFO > /sys/bus/pci/drivers/ipw2200/debug_level
+
+          You can find the list of debug mask values in 
+          drivers/net/wireless/ipw2200.h
+
+          If you are not trying to debug or develop the IPW2200 driver, you 
+          most likely want to say N here.
+
 config AIRO
         tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
         depends on NET_RADIO && ISA && (PCI || BROKEN)
@@ -355,6 +459,8 @@ config PRISM54
           say M here and read <file:Documentation/modules.txt>.  The module
           will be called prism54.ko.
 
+source "drivers/net/wireless/hostap/Kconfig"
+
 # yes, this works even when no drivers are selected
 config NET_WIRELESS
         bool