12 files changed, 21 insertions, 21 deletions

diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index 12b84ed0e38a..727d728649b7 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -378,7 +378,7 @@ void i2400m_report_tlv_system_state(struct i2400m *i2400m,
  * the device's state as sometimes we need to do a link-renew (the BS
  * wants us to renew a DHCP lease, for example).
  *
- * In fact, doc says that everytime we get a link-up, we should do a
+ * In fact, doc says that every time we get a link-up, we should do a
  * DHCP negotiation...
  */
 static
@@ -675,7 +675,7 @@ void i2400m_msg_to_dev_cancel_wait(struct i2400m *i2400m, int code)
  *  - the ack message wasn't formatted correctly
  *
  * The returned skb has been allocated with wimax_msg_to_user_alloc(),
- * it contains the reponse in a netlink attribute and is ready to be
+ * it contains the response in a netlink attribute and is ready to be
  * passed up to user space with wimax_msg_to_user_send(). To access
  * the payload and its length, use wimax_msg_{data,len}() on the skb.
  *
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 65bc334ed57b..47cae7150bc1 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -654,7 +654,7 @@ void __i2400m_dev_reset_handle(struct work_struct *ws)
         if (result == -EUCLEAN) {
                 /*
                  * We come here because the reset during operational mode
-                 * wasn't successully done and need to proceed to a bus
+                 * wasn't successfully done and need to proceed to a bus
                  * reset. For the dev_reset_handle() to be able to handle
                  * the reset event later properly, we restore boot_mode back
                  * to the state before previous reset. ie: just like we are
@@ -755,7 +755,7 @@ EXPORT_SYMBOL_GPL(i2400m_error_recovery);
  * Alloc the command and ack buffers for boot mode
  *
  * Get the buffers needed to deal with boot mode messages.  These
- * buffers need to be allocated before the sdio recieve irq is setup.
+ * buffers need to be allocated before the sdio receive irq is setup.
  */
 static
 int i2400m_bm_buf_alloc(struct i2400m *i2400m)
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index 8b55a5b14152..85dadd5bf4be 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -54,7 +54,7 @@
  * endpoint and read from it in the notification endpoint. In SDIO we
  * talk to it via the write address and read from the read address.
  *
- * Upon entrance to boot mode, the device sends (preceeded with a few
+ * Upon entrance to boot mode, the device sends (preceded with a few
  * zero length packets (ZLPs) on the notification endpoint in USB) a
  * reboot barker (4 le32 words with the same value). We ack it by
  * sending the same barker to the device. The device acks with a
@@ -1589,7 +1589,7 @@ int i2400m_dev_bootstrap(struct i2400m *i2400m, enum i2400m_bri flags)
                 i2400m->fw_name = fw_name;
                 ret = i2400m_fw_bootstrap(i2400m, fw, flags);
                 release_firmware(fw);
-                if (ret >= 0)   /* firmware loaded succesfully */
+                if (ret >= 0)   /* firmware loaded successfully */
                         break;
                 i2400m->fw_name = NULL;
         }
diff --git a/drivers/net/wimax/i2400m/i2400m-usb.h b/drivers/net/wimax/i2400m/i2400m-usb.h
index eb80243e22df..6650fde99e1d 100644
--- a/drivers/net/wimax/i2400m/i2400m-usb.h
+++ b/drivers/net/wimax/i2400m/i2400m-usb.h
@@ -105,14 +105,14 @@ static inline void edc_init(struct edc *edc)
  *
  * @edc: pointer to error density counter.
  * @max_err: maximum number of errors we can accept over the timeframe
- * @timeframe: lenght of the timeframe (in jiffies).
+ * @timeframe: length of the timeframe (in jiffies).
  *
  * Returns: !0 1 if maximum acceptable errors per timeframe has been
  *     exceeded. 0 otherwise.
  *
  * This is way to determine if the number of acceptable errors per time
  * period has been exceeded. It is not accurate as there are cases in which
- * this scheme will not work, for example if there are periodic occurences
+ * this scheme will not work, for example if there are periodic occurrences
  * of errors that straddle updates to the start time. This scheme is
  * sufficient for our usage.
  *
@@ -204,7 +204,7 @@ enum {
  *     usb_autopm_get/put_interface() barriers when executing
  *     commands. See doc in i2400mu_suspend() for more information.
  *
- * @rx_size_auto_shrink: if true, the rx_size is shrinked
+ * @rx_size_auto_shrink: if true, the rx_size is shrunk
  *     automatically based on the average size of the received
  *     transactions. This allows the receive code to allocate smaller
  *     chunks of memory and thus reduce pressure on the memory
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 030cbfd31704..5eacc653a94d 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -526,7 +526,7 @@ struct i2400m_barker_db;
  *
  * @barker: barker type that the device uses; this is initialized by
  *     i2400m_is_boot_barker() the first time it is called. Then it
- *     won't change during the life cycle of the device and everytime
+ *     won't change during the life cycle of the device and every time
  *     a boot barker is received, it is just verified for it being the
  *     same.
  *
@@ -928,7 +928,7 @@ extern void i2400m_report_tlv_rf_switches_status(
         struct i2400m *, const struct i2400m_tlv_rf_switches_status *);
 
 /*
- * Helpers for firmware backwards compability
+ * Helpers for firmware backwards compatibility
  *
  * As we aim to support at least the firmware version that was
  * released with the previous kernel/driver release, some code will be
diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c
index 94742e1eafe0..2edd8fe1c1f3 100644
--- a/drivers/net/wimax/i2400m/netdev.c
+++ b/drivers/net/wimax/i2400m/netdev.c
@@ -166,7 +166,7 @@ void i2400m_wake_tx_work(struct work_struct *ws)
         d_fnstart(3, dev, "(ws %p i2400m %p skb %p)\n", ws, i2400m, skb);
         result = -EINVAL;
         if (skb == NULL) {
-                dev_err(dev, "WAKE&TX: skb dissapeared!\n");
+                dev_err(dev, "WAKE&TX: skb disappeared!\n");
                 goto out_put;
         }
         /* If we have, somehow, lost the connection after this was
diff --git a/drivers/net/wimax/i2400m/op-rfkill.c b/drivers/net/wimax/i2400m/op-rfkill.c
index 9e02b90b0080..b0dba35a8ad2 100644
--- a/drivers/net/wimax/i2400m/op-rfkill.c
+++ b/drivers/net/wimax/i2400m/op-rfkill.c
@@ -27,7 +27,7 @@
  * - report changes in the HW RF Kill switch [with
  *   wimax_rfkill_{sw,hw}_report(), which happens when we detect those
  *   indications coming through hardware reports]. We also do it on
- *   initialization to let the stack know the intial HW state.
+ *   initialization to let the stack know the initial HW state.
  *
  * - implement indications from the stack to change the SW RF Kill
  *   switch (coming from sysfs, the wimax stack or user space).
@@ -73,7 +73,7 @@ int i2400m_radio_is(struct i2400m *i2400m, enum wimax_rf_state state)
  * Generic Netlink will call this function when a message is sent from
  * userspace to change the software RF-Kill switch status.
  *
- * This function will set the device's sofware RF-Kill switch state to
+ * This function will set the device's software RF-Kill switch state to
  * match what is requested.
  *
  * NOTE: the i2400m has a strict state machine; we can only set the
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 844133b44af0..2f94a872101f 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -349,7 +349,7 @@ error_no_waiter:
  *
  * For reports: We can't clone the original skb where the data is
  * because we need to send this up via netlink; netlink has to add
- * headers and we can't overwrite what's preceeding the payload...as
+ * headers and we can't overwrite what's preceding the payload...as
  * it is another message. So we just dup them.
  */
 static
@@ -425,7 +425,7 @@ error_check:
  *
  * As in i2400m_rx_ctl(), we can't clone the original skb where the
  * data is because we need to send this up via netlink; netlink has to
- * add headers and we can't overwrite what's preceeding the
+ * add headers and we can't overwrite what's preceding the
  * payload...as it is another message. So we just dup them.
  */
 static
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index 3f819efc06b5..4b30ed11d785 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -149,7 +149,7 @@
  * (with a moved message header to make sure it is size-aligned to
  * 16), TAIL room that was unusable (and thus is marked with a message
  * header that says 'skip this') and at the head of the buffer, an
- * imcomplete message with a couple of payloads.
+ * incomplete message with a couple of payloads.
  *
  * N   ___________________________________________________
  *    |                                                   |
@@ -819,7 +819,7 @@ EXPORT_SYMBOL_GPL(i2400m_tx);
  * the FIF that is ready for transmission.
  *
  * It sets the state in @i2400m to indicate the bus-specific driver is
- * transfering that message (i2400m->tx_msg_size).
+ * transferring that message (i2400m->tx_msg_size).
  *
  * Once the transfer is completed, call i2400m_tx_msg_sent().
  *
diff --git a/drivers/net/wimax/i2400m/usb-fw.c b/drivers/net/wimax/i2400m/usb-fw.c
index b58ec56b86f8..1fda46c55eb3 100644
--- a/drivers/net/wimax/i2400m/usb-fw.c
+++ b/drivers/net/wimax/i2400m/usb-fw.c
@@ -169,7 +169,7 @@ retry:
  *
  * Command can be a raw command, which requires no preparation (and
  * which might not even be following the command format). Checks that
- * the right amount of data was transfered.
+ * the right amount of data was transferred.
  *
  * To satisfy USB requirements (no onstack, vmalloc or in data segment
  * buffers), we copy the command to i2400m->bm_cmd_buf and send it from
diff --git a/drivers/net/wimax/i2400m/usb-rx.c b/drivers/net/wimax/i2400m/usb-rx.c
index a26483a812a5..e3257681e360 100644
--- a/drivers/net/wimax/i2400m/usb-rx.c
+++ b/drivers/net/wimax/i2400m/usb-rx.c
@@ -58,7 +58,7 @@
  *    a zillion reads; by serializing, we are throttling.
  *
  *  - RX data processing can get heavy enough so that it is not
- *    appropiate for doing it in the USB callback; thus we run it in a
+ *    appropriate for doing it in the USB callback; thus we run it in a
  *    process context.
  *
  * We provide a read buffer of an arbitrary size (short of a page); if
diff --git a/drivers/net/wimax/i2400m/usb-tx.c b/drivers/net/wimax/i2400m/usb-tx.c
index c65b9979f87e..ac357acfb3e9 100644
--- a/drivers/net/wimax/i2400m/usb-tx.c
+++ b/drivers/net/wimax/i2400m/usb-tx.c
@@ -168,7 +168,7 @@ retry:
 /*
  * Get the next TX message in the TX FIFO and send it to the device
  *
- * Note we exit the loop if i2400mu_tx() fails; that funtion only
+ * Note we exit the loop if i2400mu_tx() fails; that function only
  * fails on hard error (failing to tx a buffer not being one of them,
  * see its doc).
  *