diff options
Diffstat (limited to 'drivers/net/vxge/vxge-main.c')
-rw-r--r-- | drivers/net/vxge/vxge-main.c | 4502 |
1 files changed, 4502 insertions, 0 deletions
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c new file mode 100644 index 000000000000..61ef16118157 --- /dev/null +++ b/drivers/net/vxge/vxge-main.c | |||
@@ -0,0 +1,4502 @@ | |||
1 | /****************************************************************************** | ||
2 | * This software may be used and distributed according to the terms of | ||
3 | * the GNU General Public License (GPL), incorporated herein by reference. | ||
4 | * Drivers based on or derived from this code fall under the GPL and must | ||
5 | * retain the authorship, copyright and license notice. This file is not | ||
6 | * a complete program and may only be used when the entire operating | ||
7 | * system is licensed under the GPL. | ||
8 | * See the file COPYING in this distribution for more information. | ||
9 | * | ||
10 | * vxge-main.c: Driver for Neterion Inc's X3100 Series 10GbE PCIe I/O | ||
11 | * Virtualized Server Adapter. | ||
12 | * Copyright(c) 2002-2009 Neterion Inc. | ||
13 | * | ||
14 | * The module loadable parameters that are supported by the driver and a brief | ||
15 | * explanation of all the variables: | ||
16 | * vlan_tag_strip: | ||
17 | * Strip VLAN Tag enable/disable. Instructs the device to remove | ||
18 | * the VLAN tag from all received tagged frames that are not | ||
19 | * replicated at the internal L2 switch. | ||
20 | * 0 - Do not strip the VLAN tag. | ||
21 | * 1 - Strip the VLAN tag. | ||
22 | * | ||
23 | * addr_learn_en: | ||
24 | * Enable learning the mac address of the guest OS interface in | ||
25 | * a virtualization environment. | ||
26 | * 0 - DISABLE | ||
27 | * 1 - ENABLE | ||
28 | * | ||
29 | * max_config_port: | ||
30 | * Maximum number of port to be supported. | ||
31 | * MIN -1 and MAX - 2 | ||
32 | * | ||
33 | * max_config_vpath: | ||
34 | * This configures the maximum no of VPATH configures for each | ||
35 | * device function. | ||
36 | * MIN - 1 and MAX - 17 | ||
37 | * | ||
38 | * max_config_dev: | ||
39 | * This configures maximum no of Device function to be enabled. | ||
40 | * MIN - 1 and MAX - 17 | ||
41 | * | ||
42 | ******************************************************************************/ | ||
43 | |||
44 | #include <linux/if_vlan.h> | ||
45 | #include <linux/pci.h> | ||
46 | #include <net/ip.h> | ||
47 | #include <linux/netdevice.h> | ||
48 | #include <linux/etherdevice.h> | ||
49 | #include "vxge-main.h" | ||
50 | #include "vxge-reg.h" | ||
51 | |||
52 | MODULE_LICENSE("Dual BSD/GPL"); | ||
53 | MODULE_DESCRIPTION("Neterion's X3100 Series 10GbE PCIe I/O" | ||
54 | "Virtualized Server Adapter"); | ||
55 | |||
56 | static struct pci_device_id vxge_id_table[] __devinitdata = { | ||
57 | {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_WIN, PCI_ANY_ID, | ||
58 | PCI_ANY_ID}, | ||
59 | {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_UNI, PCI_ANY_ID, | ||
60 | PCI_ANY_ID}, | ||
61 | {0} | ||
62 | }; | ||
63 | |||
64 | MODULE_DEVICE_TABLE(pci, vxge_id_table); | ||
65 | |||
66 | VXGE_MODULE_PARAM_INT(vlan_tag_strip, VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE); | ||
67 | VXGE_MODULE_PARAM_INT(addr_learn_en, VXGE_HW_MAC_ADDR_LEARN_DEFAULT); | ||
68 | VXGE_MODULE_PARAM_INT(max_config_port, VXGE_MAX_CONFIG_PORT); | ||
69 | VXGE_MODULE_PARAM_INT(max_config_vpath, VXGE_USE_DEFAULT); | ||
70 | VXGE_MODULE_PARAM_INT(max_mac_vpath, VXGE_MAX_MAC_ADDR_COUNT); | ||
71 | VXGE_MODULE_PARAM_INT(max_config_dev, VXGE_MAX_CONFIG_DEV); | ||
72 | |||
73 | static u16 vpath_selector[VXGE_HW_MAX_VIRTUAL_PATHS] = | ||
74 | {0, 1, 3, 3, 7, 7, 7, 7, 15, 15, 15, 15, 15, 15, 15, 15, 31}; | ||
75 | static unsigned int bw_percentage[VXGE_HW_MAX_VIRTUAL_PATHS] = | ||
76 | {[0 ...(VXGE_HW_MAX_VIRTUAL_PATHS - 1)] = 0xFF}; | ||
77 | module_param_array(bw_percentage, uint, NULL, 0); | ||
78 | |||
79 | static struct vxge_drv_config *driver_config; | ||
80 | |||
81 | static inline int is_vxge_card_up(struct vxgedev *vdev) | ||
82 | { | ||
83 | return test_bit(__VXGE_STATE_CARD_UP, &vdev->state); | ||
84 | } | ||
85 | |||
86 | static inline void VXGE_COMPLETE_VPATH_TX(struct vxge_fifo *fifo) | ||
87 | { | ||
88 | unsigned long flags = 0; | ||
89 | struct sk_buff *skb_ptr = NULL; | ||
90 | struct sk_buff **temp, *head, *skb; | ||
91 | |||
92 | if (spin_trylock_irqsave(&fifo->tx_lock, flags)) { | ||
93 | vxge_hw_vpath_poll_tx(fifo->handle, (void **)&skb_ptr); | ||
94 | spin_unlock_irqrestore(&fifo->tx_lock, flags); | ||
95 | } | ||
96 | /* free SKBs */ | ||
97 | head = skb_ptr; | ||
98 | while (head) { | ||
99 | skb = head; | ||
100 | temp = (struct sk_buff **)&skb->cb; | ||
101 | head = *temp; | ||
102 | *temp = NULL; | ||
103 | dev_kfree_skb_irq(skb); | ||
104 | } | ||
105 | } | ||
106 | |||
107 | static inline void VXGE_COMPLETE_ALL_TX(struct vxgedev *vdev) | ||
108 | { | ||
109 | int i; | ||
110 | |||
111 | /* Complete all transmits */ | ||
112 | for (i = 0; i < vdev->no_of_vpath; i++) | ||
113 | VXGE_COMPLETE_VPATH_TX(&vdev->vpaths[i].fifo); | ||
114 | } | ||
115 | |||
116 | static inline void VXGE_COMPLETE_ALL_RX(struct vxgedev *vdev) | ||
117 | { | ||
118 | int i; | ||
119 | struct vxge_ring *ring; | ||
120 | |||
121 | /* Complete all receives*/ | ||
122 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
123 | ring = &vdev->vpaths[i].ring; | ||
124 | vxge_hw_vpath_poll_rx(ring->handle); | ||
125 | } | ||
126 | } | ||
127 | |||
128 | /* | ||
129 | * MultiQ manipulation helper functions | ||
130 | */ | ||
131 | void vxge_stop_all_tx_queue(struct vxgedev *vdev) | ||
132 | { | ||
133 | int i; | ||
134 | struct net_device *dev = vdev->ndev; | ||
135 | |||
136 | if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) { | ||
137 | for (i = 0; i < vdev->no_of_vpath; i++) | ||
138 | vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_STOP; | ||
139 | } | ||
140 | netif_tx_stop_all_queues(dev); | ||
141 | } | ||
142 | |||
143 | void vxge_stop_tx_queue(struct vxge_fifo *fifo) | ||
144 | { | ||
145 | struct net_device *dev = fifo->ndev; | ||
146 | |||
147 | struct netdev_queue *txq = NULL; | ||
148 | if (fifo->tx_steering_type == TX_MULTIQ_STEERING) | ||
149 | txq = netdev_get_tx_queue(dev, fifo->driver_id); | ||
150 | else { | ||
151 | txq = netdev_get_tx_queue(dev, 0); | ||
152 | fifo->queue_state = VPATH_QUEUE_STOP; | ||
153 | } | ||
154 | |||
155 | netif_tx_stop_queue(txq); | ||
156 | } | ||
157 | |||
158 | void vxge_start_all_tx_queue(struct vxgedev *vdev) | ||
159 | { | ||
160 | int i; | ||
161 | struct net_device *dev = vdev->ndev; | ||
162 | |||
163 | if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) { | ||
164 | for (i = 0; i < vdev->no_of_vpath; i++) | ||
165 | vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_START; | ||
166 | } | ||
167 | netif_tx_start_all_queues(dev); | ||
168 | } | ||
169 | |||
170 | static void vxge_wake_all_tx_queue(struct vxgedev *vdev) | ||
171 | { | ||
172 | int i; | ||
173 | struct net_device *dev = vdev->ndev; | ||
174 | |||
175 | if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) { | ||
176 | for (i = 0; i < vdev->no_of_vpath; i++) | ||
177 | vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_START; | ||
178 | } | ||
179 | netif_tx_wake_all_queues(dev); | ||
180 | } | ||
181 | |||
182 | void vxge_wake_tx_queue(struct vxge_fifo *fifo, struct sk_buff *skb) | ||
183 | { | ||
184 | struct net_device *dev = fifo->ndev; | ||
185 | |||
186 | int vpath_no = fifo->driver_id; | ||
187 | struct netdev_queue *txq = NULL; | ||
188 | if (fifo->tx_steering_type == TX_MULTIQ_STEERING) { | ||
189 | txq = netdev_get_tx_queue(dev, vpath_no); | ||
190 | if (netif_tx_queue_stopped(txq)) | ||
191 | netif_tx_wake_queue(txq); | ||
192 | } else { | ||
193 | txq = netdev_get_tx_queue(dev, 0); | ||
194 | if (fifo->queue_state == VPATH_QUEUE_STOP) | ||
195 | if (netif_tx_queue_stopped(txq)) { | ||
196 | fifo->queue_state = VPATH_QUEUE_START; | ||
197 | netif_tx_wake_queue(txq); | ||
198 | } | ||
199 | } | ||
200 | } | ||
201 | |||
202 | /* | ||
203 | * vxge_callback_link_up | ||
204 | * | ||
205 | * This function is called during interrupt context to notify link up state | ||
206 | * change. | ||
207 | */ | ||
208 | void | ||
209 | vxge_callback_link_up(struct __vxge_hw_device *hldev) | ||
210 | { | ||
211 | struct net_device *dev = hldev->ndev; | ||
212 | struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev); | ||
213 | |||
214 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | ||
215 | vdev->ndev->name, __func__, __LINE__); | ||
216 | printk(KERN_NOTICE "%s: Link Up\n", vdev->ndev->name); | ||
217 | vdev->stats.link_up++; | ||
218 | |||
219 | netif_carrier_on(vdev->ndev); | ||
220 | vxge_wake_all_tx_queue(vdev); | ||
221 | |||
222 | vxge_debug_entryexit(VXGE_TRACE, | ||
223 | "%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__); | ||
224 | } | ||
225 | |||
226 | /* | ||
227 | * vxge_callback_link_down | ||
228 | * | ||
229 | * This function is called during interrupt context to notify link down state | ||
230 | * change. | ||
231 | */ | ||
232 | void | ||
233 | vxge_callback_link_down(struct __vxge_hw_device *hldev) | ||
234 | { | ||
235 | struct net_device *dev = hldev->ndev; | ||
236 | struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev); | ||
237 | |||
238 | vxge_debug_entryexit(VXGE_TRACE, | ||
239 | "%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | ||
240 | printk(KERN_NOTICE "%s: Link Down\n", vdev->ndev->name); | ||
241 | |||
242 | vdev->stats.link_down++; | ||
243 | netif_carrier_off(vdev->ndev); | ||
244 | vxge_stop_all_tx_queue(vdev); | ||
245 | |||
246 | vxge_debug_entryexit(VXGE_TRACE, | ||
247 | "%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__); | ||
248 | } | ||
249 | |||
250 | /* | ||
251 | * vxge_rx_alloc | ||
252 | * | ||
253 | * Allocate SKB. | ||
254 | */ | ||
255 | static struct sk_buff* | ||
256 | vxge_rx_alloc(void *dtrh, struct vxge_ring *ring, const int skb_size) | ||
257 | { | ||
258 | struct net_device *dev; | ||
259 | struct sk_buff *skb; | ||
260 | struct vxge_rx_priv *rx_priv; | ||
261 | |||
262 | dev = ring->ndev; | ||
263 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | ||
264 | ring->ndev->name, __func__, __LINE__); | ||
265 | |||
266 | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | ||
267 | |||
268 | /* try to allocate skb first. this one may fail */ | ||
269 | skb = netdev_alloc_skb(dev, skb_size + | ||
270 | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | ||
271 | if (skb == NULL) { | ||
272 | vxge_debug_mem(VXGE_ERR, | ||
273 | "%s: out of memory to allocate SKB", dev->name); | ||
274 | ring->stats.skb_alloc_fail++; | ||
275 | return NULL; | ||
276 | } | ||
277 | |||
278 | vxge_debug_mem(VXGE_TRACE, | ||
279 | "%s: %s:%d Skb : 0x%p", ring->ndev->name, | ||
280 | __func__, __LINE__, skb); | ||
281 | |||
282 | skb_reserve(skb, VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | ||
283 | |||
284 | rx_priv->skb = skb; | ||
285 | rx_priv->data_size = skb_size; | ||
286 | vxge_debug_entryexit(VXGE_TRACE, | ||
287 | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | ||
288 | |||
289 | return skb; | ||
290 | } | ||
291 | |||
292 | /* | ||
293 | * vxge_rx_map | ||
294 | */ | ||
295 | static int vxge_rx_map(void *dtrh, struct vxge_ring *ring) | ||
296 | { | ||
297 | struct vxge_rx_priv *rx_priv; | ||
298 | dma_addr_t dma_addr; | ||
299 | |||
300 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | ||
301 | ring->ndev->name, __func__, __LINE__); | ||
302 | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | ||
303 | |||
304 | dma_addr = pci_map_single(ring->pdev, rx_priv->skb->data, | ||
305 | rx_priv->data_size, PCI_DMA_FROMDEVICE); | ||
306 | |||
307 | if (dma_addr == 0) { | ||
308 | ring->stats.pci_map_fail++; | ||
309 | return -EIO; | ||
310 | } | ||
311 | vxge_debug_mem(VXGE_TRACE, | ||
312 | "%s: %s:%d 1 buffer mode dma_addr = 0x%llx", | ||
313 | ring->ndev->name, __func__, __LINE__, | ||
314 | (unsigned long long)dma_addr); | ||
315 | vxge_hw_ring_rxd_1b_set(dtrh, dma_addr, rx_priv->data_size); | ||
316 | |||
317 | rx_priv->data_dma = dma_addr; | ||
318 | vxge_debug_entryexit(VXGE_TRACE, | ||
319 | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | ||
320 | |||
321 | return 0; | ||
322 | } | ||
323 | |||
324 | /* | ||
325 | * vxge_rx_initial_replenish | ||
326 | * Allocation of RxD as an initial replenish procedure. | ||
327 | */ | ||
328 | static enum vxge_hw_status | ||
329 | vxge_rx_initial_replenish(void *dtrh, void *userdata) | ||
330 | { | ||
331 | struct vxge_ring *ring = (struct vxge_ring *)userdata; | ||
332 | struct vxge_rx_priv *rx_priv; | ||
333 | |||
334 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | ||
335 | ring->ndev->name, __func__, __LINE__); | ||
336 | if (vxge_rx_alloc(dtrh, ring, | ||
337 | VXGE_LL_MAX_FRAME_SIZE(ring->ndev)) == NULL) | ||
338 | return VXGE_HW_FAIL; | ||
339 | |||
340 | if (vxge_rx_map(dtrh, ring)) { | ||
341 | rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | ||
342 | dev_kfree_skb(rx_priv->skb); | ||
343 | |||
344 | return VXGE_HW_FAIL; | ||
345 | } | ||
346 | vxge_debug_entryexit(VXGE_TRACE, | ||
347 | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | ||
348 | |||
349 | return VXGE_HW_OK; | ||
350 | } | ||
351 | |||
352 | static inline void | ||
353 | vxge_rx_complete(struct vxge_ring *ring, struct sk_buff *skb, u16 vlan, | ||
354 | int pkt_length, struct vxge_hw_ring_rxd_info *ext_info) | ||
355 | { | ||
356 | |||
357 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | ||
358 | ring->ndev->name, __func__, __LINE__); | ||
359 | skb_record_rx_queue(skb, ring->driver_id); | ||
360 | skb->protocol = eth_type_trans(skb, ring->ndev); | ||
361 | |||
362 | ring->stats.rx_frms++; | ||
363 | ring->stats.rx_bytes += pkt_length; | ||
364 | |||
365 | if (skb->pkt_type == PACKET_MULTICAST) | ||
366 | ring->stats.rx_mcast++; | ||
367 | |||
368 | vxge_debug_rx(VXGE_TRACE, | ||
369 | "%s: %s:%d skb protocol = %d", | ||
370 | ring->ndev->name, __func__, __LINE__, skb->protocol); | ||
371 | |||
372 | if (ring->gro_enable) { | ||
373 | if (ring->vlgrp && ext_info->vlan && | ||
374 | (ring->vlan_tag_strip == | ||
375 | VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE)) | ||
376 | vlan_gro_receive(&ring->napi, ring->vlgrp, | ||
377 | ext_info->vlan, skb); | ||
378 | else | ||
379 | napi_gro_receive(&ring->napi, skb); | ||
380 | } else { | ||
381 | if (ring->vlgrp && vlan && | ||
382 | (ring->vlan_tag_strip == | ||
383 | VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE)) | ||
384 | vlan_hwaccel_receive_skb(skb, ring->vlgrp, vlan); | ||
385 | else | ||
386 | netif_receive_skb(skb); | ||
387 | } | ||
388 | vxge_debug_entryexit(VXGE_TRACE, | ||
389 | "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | ||
390 | } | ||
391 | |||
392 | static inline void vxge_re_pre_post(void *dtr, struct vxge_ring *ring, | ||
393 | struct vxge_rx_priv *rx_priv) | ||
394 | { | ||
395 | pci_dma_sync_single_for_device(ring->pdev, | ||
396 | rx_priv->data_dma, rx_priv->data_size, PCI_DMA_FROMDEVICE); | ||
397 | |||
398 | vxge_hw_ring_rxd_1b_set(dtr, rx_priv->data_dma, rx_priv->data_size); | ||
399 | vxge_hw_ring_rxd_pre_post(ring->handle, dtr); | ||
400 | } | ||
401 | |||
402 | static inline void vxge_post(int *dtr_cnt, void **first_dtr, | ||
403 | void *post_dtr, struct __vxge_hw_ring *ringh) | ||
404 | { | ||
405 | int dtr_count = *dtr_cnt; | ||
406 | if ((*dtr_cnt % VXGE_HW_RXSYNC_FREQ_CNT) == 0) { | ||
407 | if (*first_dtr) | ||
408 | vxge_hw_ring_rxd_post_post_wmb(ringh, *first_dtr); | ||
409 | *first_dtr = post_dtr; | ||
410 | } else | ||
411 | vxge_hw_ring_rxd_post_post(ringh, post_dtr); | ||
412 | dtr_count++; | ||
413 | *dtr_cnt = dtr_count; | ||
414 | } | ||
415 | |||
416 | /* | ||
417 | * vxge_rx_1b_compl | ||
418 | * | ||
419 | * If the interrupt is because of a received frame or if the receive ring | ||
420 | * contains fresh as yet un-processed frames, this function is called. | ||
421 | */ | ||
422 | enum vxge_hw_status | ||
423 | vxge_rx_1b_compl(struct __vxge_hw_ring *ringh, void *dtr, | ||
424 | u8 t_code, void *userdata) | ||
425 | { | ||
426 | struct vxge_ring *ring = (struct vxge_ring *)userdata; | ||
427 | struct net_device *dev = ring->ndev; | ||
428 | unsigned int dma_sizes; | ||
429 | void *first_dtr = NULL; | ||
430 | int dtr_cnt = 0; | ||
431 | int data_size; | ||
432 | dma_addr_t data_dma; | ||
433 | int pkt_length; | ||
434 | struct sk_buff *skb; | ||
435 | struct vxge_rx_priv *rx_priv; | ||
436 | struct vxge_hw_ring_rxd_info ext_info; | ||
437 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | ||
438 | ring->ndev->name, __func__, __LINE__); | ||
439 | ring->pkts_processed = 0; | ||
440 | |||
441 | vxge_hw_ring_replenish(ringh, 0); | ||
442 | |||
443 | do { | ||
444 | rx_priv = vxge_hw_ring_rxd_private_get(dtr); | ||
445 | skb = rx_priv->skb; | ||
446 | data_size = rx_priv->data_size; | ||
447 | data_dma = rx_priv->data_dma; | ||
448 | |||
449 | vxge_debug_rx(VXGE_TRACE, | ||
450 | "%s: %s:%d skb = 0x%p", | ||
451 | ring->ndev->name, __func__, __LINE__, skb); | ||
452 | |||
453 | vxge_hw_ring_rxd_1b_get(ringh, dtr, &dma_sizes); | ||
454 | pkt_length = dma_sizes; | ||
455 | |||
456 | vxge_debug_rx(VXGE_TRACE, | ||
457 | "%s: %s:%d Packet Length = %d", | ||
458 | ring->ndev->name, __func__, __LINE__, pkt_length); | ||
459 | |||
460 | vxge_hw_ring_rxd_1b_info_get(ringh, dtr, &ext_info); | ||
461 | |||
462 | /* check skb validity */ | ||
463 | vxge_assert(skb); | ||
464 | |||
465 | prefetch((char *)skb + L1_CACHE_BYTES); | ||
466 | if (unlikely(t_code)) { | ||
467 | |||
468 | if (vxge_hw_ring_handle_tcode(ringh, dtr, t_code) != | ||
469 | VXGE_HW_OK) { | ||
470 | |||
471 | ring->stats.rx_errors++; | ||
472 | vxge_debug_rx(VXGE_TRACE, | ||
473 | "%s: %s :%d Rx T_code is %d", | ||
474 | ring->ndev->name, __func__, | ||
475 | __LINE__, t_code); | ||
476 | |||
477 | /* If the t_code is not supported and if the | ||
478 | * t_code is other than 0x5 (unparseable packet | ||
479 | * such as unknown UPV6 header), Drop it !!! | ||
480 | */ | ||
481 | vxge_re_pre_post(dtr, ring, rx_priv); | ||
482 | |||
483 | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | ||
484 | ring->stats.rx_dropped++; | ||
485 | continue; | ||
486 | } | ||
487 | } | ||
488 | |||
489 | if (pkt_length > VXGE_LL_RX_COPY_THRESHOLD) { | ||
490 | |||
491 | if (vxge_rx_alloc(dtr, ring, data_size) != NULL) { | ||
492 | |||
493 | if (!vxge_rx_map(dtr, ring)) { | ||
494 | skb_put(skb, pkt_length); | ||
495 | |||
496 | pci_unmap_single(ring->pdev, data_dma, | ||
497 | data_size, PCI_DMA_FROMDEVICE); | ||
498 | |||
499 | vxge_hw_ring_rxd_pre_post(ringh, dtr); | ||
500 | vxge_post(&dtr_cnt, &first_dtr, dtr, | ||
501 | ringh); | ||
502 | } else { | ||
503 | dev_kfree_skb(rx_priv->skb); | ||
504 | rx_priv->skb = skb; | ||
505 | rx_priv->data_size = data_size; | ||
506 | vxge_re_pre_post(dtr, ring, rx_priv); | ||
507 | |||
508 | vxge_post(&dtr_cnt, &first_dtr, dtr, | ||
509 | ringh); | ||
510 | ring->stats.rx_dropped++; | ||
511 | break; | ||
512 | } | ||
513 | } else { | ||
514 | vxge_re_pre_post(dtr, ring, rx_priv); | ||
515 | |||
516 | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | ||
517 | ring->stats.rx_dropped++; | ||
518 | break; | ||
519 | } | ||
520 | } else { | ||
521 | struct sk_buff *skb_up; | ||
522 | |||
523 | skb_up = netdev_alloc_skb(dev, pkt_length + | ||
524 | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | ||
525 | if (skb_up != NULL) { | ||
526 | skb_reserve(skb_up, | ||
527 | VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | ||
528 | |||
529 | pci_dma_sync_single_for_cpu(ring->pdev, | ||
530 | data_dma, data_size, | ||
531 | PCI_DMA_FROMDEVICE); | ||
532 | |||
533 | vxge_debug_mem(VXGE_TRACE, | ||
534 | "%s: %s:%d skb_up = %p", | ||
535 | ring->ndev->name, __func__, | ||
536 | __LINE__, skb); | ||
537 | memcpy(skb_up->data, skb->data, pkt_length); | ||
538 | |||
539 | vxge_re_pre_post(dtr, ring, rx_priv); | ||
540 | |||
541 | vxge_post(&dtr_cnt, &first_dtr, dtr, | ||
542 | ringh); | ||
543 | /* will netif_rx small SKB instead */ | ||
544 | skb = skb_up; | ||
545 | skb_put(skb, pkt_length); | ||
546 | } else { | ||
547 | vxge_re_pre_post(dtr, ring, rx_priv); | ||
548 | |||
549 | vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | ||
550 | vxge_debug_rx(VXGE_ERR, | ||
551 | "%s: vxge_rx_1b_compl: out of " | ||
552 | "memory", dev->name); | ||
553 | ring->stats.skb_alloc_fail++; | ||
554 | break; | ||
555 | } | ||
556 | } | ||
557 | |||
558 | if ((ext_info.proto & VXGE_HW_FRAME_PROTO_TCP_OR_UDP) && | ||
559 | !(ext_info.proto & VXGE_HW_FRAME_PROTO_IP_FRAG) && | ||
560 | ring->rx_csum && /* Offload Rx side CSUM */ | ||
561 | ext_info.l3_cksum == VXGE_HW_L3_CKSUM_OK && | ||
562 | ext_info.l4_cksum == VXGE_HW_L4_CKSUM_OK) | ||
563 | skb->ip_summed = CHECKSUM_UNNECESSARY; | ||
564 | else | ||
565 | skb->ip_summed = CHECKSUM_NONE; | ||
566 | |||
567 | vxge_rx_complete(ring, skb, ext_info.vlan, | ||
568 | pkt_length, &ext_info); | ||
569 | |||
570 | ring->budget--; | ||
571 | ring->pkts_processed++; | ||
572 | if (!ring->budget) | ||
573 | break; | ||
574 | |||
575 | } while (vxge_hw_ring_rxd_next_completed(ringh, &dtr, | ||
576 | &t_code) == VXGE_HW_OK); | ||
577 | |||
578 | if (first_dtr) | ||
579 | vxge_hw_ring_rxd_post_post_wmb(ringh, first_dtr); | ||
580 | |||
581 | dev->last_rx = jiffies; | ||
582 | |||
583 | vxge_debug_entryexit(VXGE_TRACE, | ||
584 | "%s:%d Exiting...", | ||
585 | __func__, __LINE__); | ||
586 | return VXGE_HW_OK; | ||
587 | } | ||
588 | |||
589 | /* | ||
590 | * vxge_xmit_compl | ||
591 | * | ||
592 | * If an interrupt was raised to indicate DMA complete of the Tx packet, | ||
593 | * this function is called. It identifies the last TxD whose buffer was | ||
594 | * freed and frees all skbs whose data have already DMA'ed into the NICs | ||
595 | * internal memory. | ||
596 | */ | ||
597 | enum vxge_hw_status | ||
598 | vxge_xmit_compl(struct __vxge_hw_fifo *fifo_hw, void *dtr, | ||
599 | enum vxge_hw_fifo_tcode t_code, void *userdata, | ||
600 | void **skb_ptr) | ||
601 | { | ||
602 | struct vxge_fifo *fifo = (struct vxge_fifo *)userdata; | ||
603 | struct sk_buff *skb, *head = NULL; | ||
604 | struct sk_buff **temp; | ||
605 | int pkt_cnt = 0; | ||
606 | |||
607 | vxge_debug_entryexit(VXGE_TRACE, | ||
608 | "%s:%d Entered....", __func__, __LINE__); | ||
609 | |||
610 | do { | ||
611 | int frg_cnt; | ||
612 | skb_frag_t *frag; | ||
613 | int i = 0, j; | ||
614 | struct vxge_tx_priv *txd_priv = | ||
615 | vxge_hw_fifo_txdl_private_get(dtr); | ||
616 | |||
617 | skb = txd_priv->skb; | ||
618 | frg_cnt = skb_shinfo(skb)->nr_frags; | ||
619 | frag = &skb_shinfo(skb)->frags[0]; | ||
620 | |||
621 | vxge_debug_tx(VXGE_TRACE, | ||
622 | "%s: %s:%d fifo_hw = %p dtr = %p " | ||
623 | "tcode = 0x%x", fifo->ndev->name, __func__, | ||
624 | __LINE__, fifo_hw, dtr, t_code); | ||
625 | /* check skb validity */ | ||
626 | vxge_assert(skb); | ||
627 | vxge_debug_tx(VXGE_TRACE, | ||
628 | "%s: %s:%d skb = %p itxd_priv = %p frg_cnt = %d", | ||
629 | fifo->ndev->name, __func__, __LINE__, | ||
630 | skb, txd_priv, frg_cnt); | ||
631 | if (unlikely(t_code)) { | ||
632 | fifo->stats.tx_errors++; | ||
633 | vxge_debug_tx(VXGE_ERR, | ||
634 | "%s: tx: dtr %p completed due to " | ||
635 | "error t_code %01x", fifo->ndev->name, | ||
636 | dtr, t_code); | ||
637 | vxge_hw_fifo_handle_tcode(fifo_hw, dtr, t_code); | ||
638 | } | ||
639 | |||
640 | /* for unfragmented skb */ | ||
641 | pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++], | ||
642 | skb_headlen(skb), PCI_DMA_TODEVICE); | ||
643 | |||
644 | for (j = 0; j < frg_cnt; j++) { | ||
645 | pci_unmap_page(fifo->pdev, | ||
646 | txd_priv->dma_buffers[i++], | ||
647 | frag->size, PCI_DMA_TODEVICE); | ||
648 | frag += 1; | ||
649 | } | ||
650 | |||
651 | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | ||
652 | |||
653 | /* Updating the statistics block */ | ||
654 | fifo->stats.tx_frms++; | ||
655 | fifo->stats.tx_bytes += skb->len; | ||
656 | |||
657 | temp = (struct sk_buff **)&skb->cb; | ||
658 | *temp = head; | ||
659 | head = skb; | ||
660 | |||
661 | pkt_cnt++; | ||
662 | if (pkt_cnt > fifo->indicate_max_pkts) | ||
663 | break; | ||
664 | |||
665 | } while (vxge_hw_fifo_txdl_next_completed(fifo_hw, | ||
666 | &dtr, &t_code) == VXGE_HW_OK); | ||
667 | |||
668 | vxge_wake_tx_queue(fifo, skb); | ||
669 | |||
670 | if (skb_ptr) | ||
671 | *skb_ptr = (void *) head; | ||
672 | |||
673 | vxge_debug_entryexit(VXGE_TRACE, | ||
674 | "%s: %s:%d Exiting...", | ||
675 | fifo->ndev->name, __func__, __LINE__); | ||
676 | return VXGE_HW_OK; | ||
677 | } | ||
678 | |||
679 | /* select a vpath to trasmit the packet */ | ||
680 | static u32 vxge_get_vpath_no(struct vxgedev *vdev, struct sk_buff *skb, | ||
681 | int *do_lock) | ||
682 | { | ||
683 | u16 queue_len, counter = 0; | ||
684 | if (skb->protocol == htons(ETH_P_IP)) { | ||
685 | struct iphdr *ip; | ||
686 | struct tcphdr *th; | ||
687 | |||
688 | ip = ip_hdr(skb); | ||
689 | |||
690 | if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) { | ||
691 | th = (struct tcphdr *)(((unsigned char *)ip) + | ||
692 | ip->ihl*4); | ||
693 | |||
694 | queue_len = vdev->no_of_vpath; | ||
695 | counter = (ntohs(th->source) + | ||
696 | ntohs(th->dest)) & | ||
697 | vdev->vpath_selector[queue_len - 1]; | ||
698 | if (counter >= queue_len) | ||
699 | counter = queue_len - 1; | ||
700 | |||
701 | if (ip->protocol == IPPROTO_UDP) { | ||
702 | #ifdef NETIF_F_LLTX | ||
703 | *do_lock = 0; | ||
704 | #endif | ||
705 | } | ||
706 | } | ||
707 | } | ||
708 | return counter; | ||
709 | } | ||
710 | |||
711 | static enum vxge_hw_status vxge_search_mac_addr_in_list( | ||
712 | struct vxge_vpath *vpath, u64 del_mac) | ||
713 | { | ||
714 | struct list_head *entry, *next; | ||
715 | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | ||
716 | if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) | ||
717 | return TRUE; | ||
718 | } | ||
719 | return FALSE; | ||
720 | } | ||
721 | |||
722 | static int vxge_learn_mac(struct vxgedev *vdev, u8 *mac_header) | ||
723 | { | ||
724 | struct macInfo mac_info; | ||
725 | u8 *mac_address = NULL; | ||
726 | u64 mac_addr = 0, vpath_vector = 0; | ||
727 | int vpath_idx = 0; | ||
728 | enum vxge_hw_status status = VXGE_HW_OK; | ||
729 | struct vxge_vpath *vpath = NULL; | ||
730 | struct __vxge_hw_device *hldev; | ||
731 | |||
732 | hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | ||
733 | |||
734 | mac_address = (u8 *)&mac_addr; | ||
735 | memcpy(mac_address, mac_header, ETH_ALEN); | ||
736 | |||
737 | /* Is this mac address already in the list? */ | ||
738 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | ||
739 | vpath = &vdev->vpaths[vpath_idx]; | ||
740 | if (vxge_search_mac_addr_in_list(vpath, mac_addr)) | ||
741 | return vpath_idx; | ||
742 | } | ||
743 | |||
744 | memset(&mac_info, 0, sizeof(struct macInfo)); | ||
745 | memcpy(mac_info.macaddr, mac_header, ETH_ALEN); | ||
746 | |||
747 | /* Any vpath has room to add mac address to its da table? */ | ||
748 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | ||
749 | vpath = &vdev->vpaths[vpath_idx]; | ||
750 | if (vpath->mac_addr_cnt < vpath->max_mac_addr_cnt) { | ||
751 | /* Add this mac address to this vpath */ | ||
752 | mac_info.vpath_no = vpath_idx; | ||
753 | mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | ||
754 | status = vxge_add_mac_addr(vdev, &mac_info); | ||
755 | if (status != VXGE_HW_OK) | ||
756 | return -EPERM; | ||
757 | return vpath_idx; | ||
758 | } | ||
759 | } | ||
760 | |||
761 | mac_info.state = VXGE_LL_MAC_ADDR_IN_LIST; | ||
762 | vpath_idx = 0; | ||
763 | mac_info.vpath_no = vpath_idx; | ||
764 | /* Is the first vpath already selected as catch-basin ? */ | ||
765 | vpath = &vdev->vpaths[vpath_idx]; | ||
766 | if (vpath->mac_addr_cnt > vpath->max_mac_addr_cnt) { | ||
767 | /* Add this mac address to this vpath */ | ||
768 | if (FALSE == vxge_mac_list_add(vpath, &mac_info)) | ||
769 | return -EPERM; | ||
770 | return vpath_idx; | ||
771 | } | ||
772 | |||
773 | /* Select first vpath as catch-basin */ | ||
774 | vpath_vector = vxge_mBIT(vpath->device_id); | ||
775 | status = vxge_hw_mgmt_reg_write(vpath->vdev->devh, | ||
776 | vxge_hw_mgmt_reg_type_mrpcim, | ||
777 | 0, | ||
778 | (ulong)offsetof( | ||
779 | struct vxge_hw_mrpcim_reg, | ||
780 | rts_mgr_cbasin_cfg), | ||
781 | vpath_vector); | ||
782 | if (status != VXGE_HW_OK) { | ||
783 | vxge_debug_tx(VXGE_ERR, | ||
784 | "%s: Unable to set the vpath-%d in catch-basin mode", | ||
785 | VXGE_DRIVER_NAME, vpath->device_id); | ||
786 | return -EPERM; | ||
787 | } | ||
788 | |||
789 | if (FALSE == vxge_mac_list_add(vpath, &mac_info)) | ||
790 | return -EPERM; | ||
791 | |||
792 | return vpath_idx; | ||
793 | } | ||
794 | |||
795 | /** | ||
796 | * vxge_xmit | ||
797 | * @skb : the socket buffer containing the Tx data. | ||
798 | * @dev : device pointer. | ||
799 | * | ||
800 | * This function is the Tx entry point of the driver. Neterion NIC supports | ||
801 | * certain protocol assist features on Tx side, namely CSO, S/G, LSO. | ||
802 | * NOTE: when device cant queue the pkt, just the trans_start variable will | ||
803 | * not be upadted. | ||
804 | */ | ||
805 | static int | ||
806 | vxge_xmit(struct sk_buff *skb, struct net_device *dev) | ||
807 | { | ||
808 | struct vxge_fifo *fifo = NULL; | ||
809 | void *dtr_priv; | ||
810 | void *dtr = NULL; | ||
811 | struct vxgedev *vdev = NULL; | ||
812 | enum vxge_hw_status status; | ||
813 | int frg_cnt, first_frg_len; | ||
814 | skb_frag_t *frag; | ||
815 | int i = 0, j = 0, avail; | ||
816 | u64 dma_pointer; | ||
817 | struct vxge_tx_priv *txdl_priv = NULL; | ||
818 | struct __vxge_hw_fifo *fifo_hw; | ||
819 | u32 max_mss = 0x0; | ||
820 | int offload_type; | ||
821 | unsigned long flags = 0; | ||
822 | int vpath_no = 0; | ||
823 | int do_spin_tx_lock = 1; | ||
824 | |||
825 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | ||
826 | dev->name, __func__, __LINE__); | ||
827 | |||
828 | /* A buffer with no data will be dropped */ | ||
829 | if (unlikely(skb->len <= 0)) { | ||
830 | vxge_debug_tx(VXGE_ERR, | ||
831 | "%s: Buffer has no data..", dev->name); | ||
832 | dev_kfree_skb(skb); | ||
833 | return NETDEV_TX_OK; | ||
834 | } | ||
835 | |||
836 | vdev = (struct vxgedev *)netdev_priv(dev); | ||
837 | |||
838 | if (unlikely(!is_vxge_card_up(vdev))) { | ||
839 | vxge_debug_tx(VXGE_ERR, | ||
840 | "%s: vdev not initialized", dev->name); | ||
841 | dev_kfree_skb(skb); | ||
842 | return NETDEV_TX_OK; | ||
843 | } | ||
844 | |||
845 | if (vdev->config.addr_learn_en) { | ||
846 | vpath_no = vxge_learn_mac(vdev, skb->data + ETH_ALEN); | ||
847 | if (vpath_no == -EPERM) { | ||
848 | vxge_debug_tx(VXGE_ERR, | ||
849 | "%s: Failed to store the mac address", | ||
850 | dev->name); | ||
851 | dev_kfree_skb(skb); | ||
852 | return NETDEV_TX_OK; | ||
853 | } | ||
854 | } | ||
855 | |||
856 | if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) | ||
857 | vpath_no = skb_get_queue_mapping(skb); | ||
858 | else if (vdev->config.tx_steering_type == TX_PORT_STEERING) | ||
859 | vpath_no = vxge_get_vpath_no(vdev, skb, &do_spin_tx_lock); | ||
860 | |||
861 | vxge_debug_tx(VXGE_TRACE, "%s: vpath_no= %d", dev->name, vpath_no); | ||
862 | |||
863 | if (vpath_no >= vdev->no_of_vpath) | ||
864 | vpath_no = 0; | ||
865 | |||
866 | fifo = &vdev->vpaths[vpath_no].fifo; | ||
867 | fifo_hw = fifo->handle; | ||
868 | |||
869 | if (do_spin_tx_lock) | ||
870 | spin_lock_irqsave(&fifo->tx_lock, flags); | ||
871 | else { | ||
872 | if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags))) | ||
873 | return NETDEV_TX_LOCKED; | ||
874 | } | ||
875 | |||
876 | if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) { | ||
877 | if (netif_subqueue_stopped(dev, skb)) { | ||
878 | spin_unlock_irqrestore(&fifo->tx_lock, flags); | ||
879 | return NETDEV_TX_BUSY; | ||
880 | } | ||
881 | } else if (unlikely(fifo->queue_state == VPATH_QUEUE_STOP)) { | ||
882 | if (netif_queue_stopped(dev)) { | ||
883 | spin_unlock_irqrestore(&fifo->tx_lock, flags); | ||
884 | return NETDEV_TX_BUSY; | ||
885 | } | ||
886 | } | ||
887 | avail = vxge_hw_fifo_free_txdl_count_get(fifo_hw); | ||
888 | if (avail == 0) { | ||
889 | vxge_debug_tx(VXGE_ERR, | ||
890 | "%s: No free TXDs available", dev->name); | ||
891 | fifo->stats.txd_not_free++; | ||
892 | vxge_stop_tx_queue(fifo); | ||
893 | goto _exit2; | ||
894 | } | ||
895 | |||
896 | status = vxge_hw_fifo_txdl_reserve(fifo_hw, &dtr, &dtr_priv); | ||
897 | if (unlikely(status != VXGE_HW_OK)) { | ||
898 | vxge_debug_tx(VXGE_ERR, | ||
899 | "%s: Out of descriptors .", dev->name); | ||
900 | fifo->stats.txd_out_of_desc++; | ||
901 | vxge_stop_tx_queue(fifo); | ||
902 | goto _exit2; | ||
903 | } | ||
904 | |||
905 | vxge_debug_tx(VXGE_TRACE, | ||
906 | "%s: %s:%d fifo_hw = %p dtr = %p dtr_priv = %p", | ||
907 | dev->name, __func__, __LINE__, | ||
908 | fifo_hw, dtr, dtr_priv); | ||
909 | |||
910 | if (vdev->vlgrp && vlan_tx_tag_present(skb)) { | ||
911 | u16 vlan_tag = vlan_tx_tag_get(skb); | ||
912 | vxge_hw_fifo_txdl_vlan_set(dtr, vlan_tag); | ||
913 | } | ||
914 | |||
915 | first_frg_len = skb_headlen(skb); | ||
916 | |||
917 | dma_pointer = pci_map_single(fifo->pdev, skb->data, first_frg_len, | ||
918 | PCI_DMA_TODEVICE); | ||
919 | |||
920 | if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer))) { | ||
921 | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | ||
922 | vxge_stop_tx_queue(fifo); | ||
923 | fifo->stats.pci_map_fail++; | ||
924 | goto _exit2; | ||
925 | } | ||
926 | |||
927 | txdl_priv = vxge_hw_fifo_txdl_private_get(dtr); | ||
928 | txdl_priv->skb = skb; | ||
929 | txdl_priv->dma_buffers[j] = dma_pointer; | ||
930 | |||
931 | frg_cnt = skb_shinfo(skb)->nr_frags; | ||
932 | vxge_debug_tx(VXGE_TRACE, | ||
933 | "%s: %s:%d skb = %p txdl_priv = %p " | ||
934 | "frag_cnt = %d dma_pointer = 0x%llx", dev->name, | ||
935 | __func__, __LINE__, skb, txdl_priv, | ||
936 | frg_cnt, (unsigned long long)dma_pointer); | ||
937 | |||
938 | vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer, | ||
939 | first_frg_len); | ||
940 | |||
941 | frag = &skb_shinfo(skb)->frags[0]; | ||
942 | for (i = 0; i < frg_cnt; i++) { | ||
943 | /* ignore 0 length fragment */ | ||
944 | if (!frag->size) | ||
945 | continue; | ||
946 | |||
947 | dma_pointer = | ||
948 | (u64)pci_map_page(fifo->pdev, frag->page, | ||
949 | frag->page_offset, frag->size, | ||
950 | PCI_DMA_TODEVICE); | ||
951 | |||
952 | if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer))) | ||
953 | goto _exit0; | ||
954 | vxge_debug_tx(VXGE_TRACE, | ||
955 | "%s: %s:%d frag = %d dma_pointer = 0x%llx", | ||
956 | dev->name, __func__, __LINE__, i, | ||
957 | (unsigned long long)dma_pointer); | ||
958 | |||
959 | txdl_priv->dma_buffers[j] = dma_pointer; | ||
960 | vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer, | ||
961 | frag->size); | ||
962 | frag += 1; | ||
963 | } | ||
964 | |||
965 | offload_type = vxge_offload_type(skb); | ||
966 | |||
967 | if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) { | ||
968 | |||
969 | int mss = vxge_tcp_mss(skb); | ||
970 | if (mss) { | ||
971 | max_mss = dev->mtu + ETH_HLEN - | ||
972 | VXGE_HW_TCPIP_HEADER_MAX_SIZE; | ||
973 | if (mss > max_mss) | ||
974 | mss = max_mss; | ||
975 | vxge_debug_tx(VXGE_TRACE, | ||
976 | "%s: %s:%d mss = %d", | ||
977 | dev->name, __func__, __LINE__, mss); | ||
978 | vxge_hw_fifo_txdl_mss_set(dtr, mss); | ||
979 | } else { | ||
980 | vxge_assert(skb->len <= | ||
981 | dev->mtu + VXGE_HW_MAC_HEADER_MAX_SIZE); | ||
982 | vxge_assert(0); | ||
983 | goto _exit1; | ||
984 | } | ||
985 | } | ||
986 | |||
987 | if (skb->ip_summed == CHECKSUM_PARTIAL) | ||
988 | vxge_hw_fifo_txdl_cksum_set_bits(dtr, | ||
989 | VXGE_HW_FIFO_TXD_TX_CKO_IPV4_EN | | ||
990 | VXGE_HW_FIFO_TXD_TX_CKO_TCP_EN | | ||
991 | VXGE_HW_FIFO_TXD_TX_CKO_UDP_EN); | ||
992 | |||
993 | vxge_hw_fifo_txdl_post(fifo_hw, dtr); | ||
994 | dev->trans_start = jiffies; | ||
995 | spin_unlock_irqrestore(&fifo->tx_lock, flags); | ||
996 | |||
997 | VXGE_COMPLETE_VPATH_TX(fifo); | ||
998 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d Exiting...", | ||
999 | dev->name, __func__, __LINE__); | ||
1000 | return 0; | ||
1001 | |||
1002 | _exit0: | ||
1003 | vxge_debug_tx(VXGE_TRACE, "%s: pci_map_page failed", dev->name); | ||
1004 | |||
1005 | _exit1: | ||
1006 | j = 0; | ||
1007 | frag = &skb_shinfo(skb)->frags[0]; | ||
1008 | |||
1009 | pci_unmap_single(fifo->pdev, txdl_priv->dma_buffers[j++], | ||
1010 | skb_headlen(skb), PCI_DMA_TODEVICE); | ||
1011 | |||
1012 | for (; j < i; j++) { | ||
1013 | pci_unmap_page(fifo->pdev, txdl_priv->dma_buffers[j], | ||
1014 | frag->size, PCI_DMA_TODEVICE); | ||
1015 | frag += 1; | ||
1016 | } | ||
1017 | |||
1018 | vxge_hw_fifo_txdl_free(fifo_hw, dtr); | ||
1019 | _exit2: | ||
1020 | dev_kfree_skb(skb); | ||
1021 | spin_unlock_irqrestore(&fifo->tx_lock, flags); | ||
1022 | VXGE_COMPLETE_VPATH_TX(fifo); | ||
1023 | |||
1024 | return 0; | ||
1025 | } | ||
1026 | |||
1027 | /* | ||
1028 | * vxge_rx_term | ||
1029 | * | ||
1030 | * Function will be called by hw function to abort all outstanding receive | ||
1031 | * descriptors. | ||
1032 | */ | ||
1033 | static void | ||
1034 | vxge_rx_term(void *dtrh, enum vxge_hw_rxd_state state, void *userdata) | ||
1035 | { | ||
1036 | struct vxge_ring *ring = (struct vxge_ring *)userdata; | ||
1037 | struct vxge_rx_priv *rx_priv = | ||
1038 | vxge_hw_ring_rxd_private_get(dtrh); | ||
1039 | |||
1040 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | ||
1041 | ring->ndev->name, __func__, __LINE__); | ||
1042 | if (state != VXGE_HW_RXD_STATE_POSTED) | ||
1043 | return; | ||
1044 | |||
1045 | pci_unmap_single(ring->pdev, rx_priv->data_dma, | ||
1046 | rx_priv->data_size, PCI_DMA_FROMDEVICE); | ||
1047 | |||
1048 | dev_kfree_skb(rx_priv->skb); | ||
1049 | |||
1050 | vxge_debug_entryexit(VXGE_TRACE, | ||
1051 | "%s: %s:%d Exiting...", | ||
1052 | ring->ndev->name, __func__, __LINE__); | ||
1053 | } | ||
1054 | |||
1055 | /* | ||
1056 | * vxge_tx_term | ||
1057 | * | ||
1058 | * Function will be called to abort all outstanding tx descriptors | ||
1059 | */ | ||
1060 | static void | ||
1061 | vxge_tx_term(void *dtrh, enum vxge_hw_txdl_state state, void *userdata) | ||
1062 | { | ||
1063 | struct vxge_fifo *fifo = (struct vxge_fifo *)userdata; | ||
1064 | skb_frag_t *frag; | ||
1065 | int i = 0, j, frg_cnt; | ||
1066 | struct vxge_tx_priv *txd_priv = vxge_hw_fifo_txdl_private_get(dtrh); | ||
1067 | struct sk_buff *skb = txd_priv->skb; | ||
1068 | |||
1069 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | ||
1070 | |||
1071 | if (state != VXGE_HW_TXDL_STATE_POSTED) | ||
1072 | return; | ||
1073 | |||
1074 | /* check skb validity */ | ||
1075 | vxge_assert(skb); | ||
1076 | frg_cnt = skb_shinfo(skb)->nr_frags; | ||
1077 | frag = &skb_shinfo(skb)->frags[0]; | ||
1078 | |||
1079 | /* for unfragmented skb */ | ||
1080 | pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++], | ||
1081 | skb_headlen(skb), PCI_DMA_TODEVICE); | ||
1082 | |||
1083 | for (j = 0; j < frg_cnt; j++) { | ||
1084 | pci_unmap_page(fifo->pdev, txd_priv->dma_buffers[i++], | ||
1085 | frag->size, PCI_DMA_TODEVICE); | ||
1086 | frag += 1; | ||
1087 | } | ||
1088 | |||
1089 | dev_kfree_skb(skb); | ||
1090 | |||
1091 | vxge_debug_entryexit(VXGE_TRACE, | ||
1092 | "%s:%d Exiting...", __func__, __LINE__); | ||
1093 | } | ||
1094 | |||
1095 | /** | ||
1096 | * vxge_set_multicast | ||
1097 | * @dev: pointer to the device structure | ||
1098 | * | ||
1099 | * Entry point for multicast address enable/disable | ||
1100 | * This function is a driver entry point which gets called by the kernel | ||
1101 | * whenever multicast addresses must be enabled/disabled. This also gets | ||
1102 | * called to set/reset promiscuous mode. Depending on the deivce flag, we | ||
1103 | * determine, if multicast address must be enabled or if promiscuous mode | ||
1104 | * is to be disabled etc. | ||
1105 | */ | ||
1106 | static void vxge_set_multicast(struct net_device *dev) | ||
1107 | { | ||
1108 | struct dev_mc_list *mclist; | ||
1109 | struct vxgedev *vdev; | ||
1110 | int i, mcast_cnt = 0; | ||
1111 | struct __vxge_hw_device *hldev; | ||
1112 | enum vxge_hw_status status = VXGE_HW_OK; | ||
1113 | struct macInfo mac_info; | ||
1114 | int vpath_idx = 0; | ||
1115 | struct vxge_mac_addrs *mac_entry; | ||
1116 | struct list_head *list_head; | ||
1117 | struct list_head *entry, *next; | ||
1118 | u8 *mac_address = NULL; | ||
1119 | |||
1120 | vxge_debug_entryexit(VXGE_TRACE, | ||
1121 | "%s:%d", __func__, __LINE__); | ||
1122 | |||
1123 | vdev = (struct vxgedev *)netdev_priv(dev); | ||
1124 | hldev = (struct __vxge_hw_device *)vdev->devh; | ||
1125 | |||
1126 | if (unlikely(!is_vxge_card_up(vdev))) | ||
1127 | return; | ||
1128 | |||
1129 | if ((dev->flags & IFF_ALLMULTI) && (!vdev->all_multi_flg)) { | ||
1130 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
1131 | vxge_assert(vdev->vpaths[i].is_open); | ||
1132 | status = vxge_hw_vpath_mcast_enable( | ||
1133 | vdev->vpaths[i].handle); | ||
1134 | vdev->all_multi_flg = 1; | ||
1135 | } | ||
1136 | } else if ((dev->flags & IFF_ALLMULTI) && (vdev->all_multi_flg)) { | ||
1137 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
1138 | vxge_assert(vdev->vpaths[i].is_open); | ||
1139 | status = vxge_hw_vpath_mcast_disable( | ||
1140 | vdev->vpaths[i].handle); | ||
1141 | vdev->all_multi_flg = 1; | ||
1142 | } | ||
1143 | } | ||
1144 | |||
1145 | if (status != VXGE_HW_OK) | ||
1146 | vxge_debug_init(VXGE_ERR, | ||
1147 | "failed to %s multicast, status %d", | ||
1148 | dev->flags & IFF_ALLMULTI ? | ||
1149 | "enable" : "disable", status); | ||
1150 | |||
1151 | if (!vdev->config.addr_learn_en) { | ||
1152 | if (dev->flags & IFF_PROMISC) { | ||
1153 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
1154 | vxge_assert(vdev->vpaths[i].is_open); | ||
1155 | status = vxge_hw_vpath_promisc_enable( | ||
1156 | vdev->vpaths[i].handle); | ||
1157 | } | ||
1158 | } else { | ||
1159 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
1160 | vxge_assert(vdev->vpaths[i].is_open); | ||
1161 | status = vxge_hw_vpath_promisc_disable( | ||
1162 | vdev->vpaths[i].handle); | ||
1163 | } | ||
1164 | } | ||
1165 | } | ||
1166 | |||
1167 | memset(&mac_info, 0, sizeof(struct macInfo)); | ||
1168 | /* Update individual M_CAST address list */ | ||
1169 | if ((!vdev->all_multi_flg) && dev->mc_count) { | ||
1170 | |||
1171 | mcast_cnt = vdev->vpaths[0].mcast_addr_cnt; | ||
1172 | list_head = &vdev->vpaths[0].mac_addr_list; | ||
1173 | if ((dev->mc_count + | ||
1174 | (vdev->vpaths[0].mac_addr_cnt - mcast_cnt)) > | ||
1175 | vdev->vpaths[0].max_mac_addr_cnt) | ||
1176 | goto _set_all_mcast; | ||
1177 | |||
1178 | /* Delete previous MC's */ | ||
1179 | for (i = 0; i < mcast_cnt; i++) { | ||
1180 | if (!list_empty(list_head)) | ||
1181 | mac_entry = (struct vxge_mac_addrs *) | ||
1182 | list_first_entry(list_head, | ||
1183 | struct vxge_mac_addrs, | ||
1184 | item); | ||
1185 | |||
1186 | list_for_each_safe(entry, next, list_head) { | ||
1187 | |||
1188 | mac_entry = (struct vxge_mac_addrs *) entry; | ||
1189 | /* Copy the mac address to delete */ | ||
1190 | mac_address = (u8 *)&mac_entry->macaddr; | ||
1191 | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | ||
1192 | |||
1193 | /* Is this a multicast address */ | ||
1194 | if (0x01 & mac_info.macaddr[0]) { | ||
1195 | for (vpath_idx = 0; vpath_idx < | ||
1196 | vdev->no_of_vpath; | ||
1197 | vpath_idx++) { | ||
1198 | mac_info.vpath_no = vpath_idx; | ||
1199 | status = vxge_del_mac_addr( | ||
1200 | vdev, | ||
1201 | &mac_info); | ||
1202 | } | ||
1203 | } | ||
1204 | } | ||
1205 | } | ||
1206 | |||
1207 | /* Add new ones */ | ||
1208 | for (i = 0, mclist = dev->mc_list; i < dev->mc_count; | ||
1209 | i++, mclist = mclist->next) { | ||
1210 | |||
1211 | memcpy(mac_info.macaddr, mclist->dmi_addr, ETH_ALEN); | ||
1212 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; | ||
1213 | vpath_idx++) { | ||
1214 | mac_info.vpath_no = vpath_idx; | ||
1215 | mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | ||
1216 | status = vxge_add_mac_addr(vdev, &mac_info); | ||
1217 | if (status != VXGE_HW_OK) { | ||
1218 | vxge_debug_init(VXGE_ERR, | ||
1219 | "%s:%d Setting individual" | ||
1220 | "multicast address failed", | ||
1221 | __func__, __LINE__); | ||
1222 | goto _set_all_mcast; | ||
1223 | } | ||
1224 | } | ||
1225 | } | ||
1226 | |||
1227 | return; | ||
1228 | _set_all_mcast: | ||
1229 | mcast_cnt = vdev->vpaths[0].mcast_addr_cnt; | ||
1230 | /* Delete previous MC's */ | ||
1231 | for (i = 0; i < mcast_cnt; i++) { | ||
1232 | |||
1233 | list_for_each_safe(entry, next, list_head) { | ||
1234 | |||
1235 | mac_entry = (struct vxge_mac_addrs *) entry; | ||
1236 | /* Copy the mac address to delete */ | ||
1237 | mac_address = (u8 *)&mac_entry->macaddr; | ||
1238 | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | ||
1239 | |||
1240 | /* Is this a multicast address */ | ||
1241 | if (0x01 & mac_info.macaddr[0]) | ||
1242 | break; | ||
1243 | } | ||
1244 | |||
1245 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; | ||
1246 | vpath_idx++) { | ||
1247 | mac_info.vpath_no = vpath_idx; | ||
1248 | status = vxge_del_mac_addr(vdev, &mac_info); | ||
1249 | } | ||
1250 | } | ||
1251 | |||
1252 | /* Enable all multicast */ | ||
1253 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
1254 | vxge_assert(vdev->vpaths[i].is_open); | ||
1255 | status = vxge_hw_vpath_mcast_enable( | ||
1256 | vdev->vpaths[i].handle); | ||
1257 | if (status != VXGE_HW_OK) { | ||
1258 | vxge_debug_init(VXGE_ERR, | ||
1259 | "%s:%d Enabling all multicasts failed", | ||
1260 | __func__, __LINE__); | ||
1261 | } | ||
1262 | vdev->all_multi_flg = 1; | ||
1263 | } | ||
1264 | dev->flags |= IFF_ALLMULTI; | ||
1265 | } | ||
1266 | |||
1267 | vxge_debug_entryexit(VXGE_TRACE, | ||
1268 | "%s:%d Exiting...", __func__, __LINE__); | ||
1269 | } | ||
1270 | |||
1271 | /** | ||
1272 | * vxge_set_mac_addr | ||
1273 | * @dev: pointer to the device structure | ||
1274 | * | ||
1275 | * Update entry "0" (default MAC addr) | ||
1276 | */ | ||
1277 | static int vxge_set_mac_addr(struct net_device *dev, void *p) | ||
1278 | { | ||
1279 | struct sockaddr *addr = p; | ||
1280 | struct vxgedev *vdev; | ||
1281 | struct __vxge_hw_device *hldev; | ||
1282 | enum vxge_hw_status status = VXGE_HW_OK; | ||
1283 | struct macInfo mac_info_new, mac_info_old; | ||
1284 | int vpath_idx = 0; | ||
1285 | |||
1286 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | ||
1287 | |||
1288 | vdev = (struct vxgedev *)netdev_priv(dev); | ||
1289 | hldev = vdev->devh; | ||
1290 | |||
1291 | if (!is_valid_ether_addr(addr->sa_data)) | ||
1292 | return -EINVAL; | ||
1293 | |||
1294 | memset(&mac_info_new, 0, sizeof(struct macInfo)); | ||
1295 | memset(&mac_info_old, 0, sizeof(struct macInfo)); | ||
1296 | |||
1297 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d Exiting...", | ||
1298 | __func__, __LINE__); | ||
1299 | |||
1300 | /* Get the old address */ | ||
1301 | memcpy(mac_info_old.macaddr, dev->dev_addr, dev->addr_len); | ||
1302 | |||
1303 | /* Copy the new address */ | ||
1304 | memcpy(mac_info_new.macaddr, addr->sa_data, dev->addr_len); | ||
1305 | |||
1306 | /* First delete the old mac address from all the vpaths | ||
1307 | as we can't specify the index while adding new mac address */ | ||
1308 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | ||
1309 | struct vxge_vpath *vpath = &vdev->vpaths[vpath_idx]; | ||
1310 | if (!vpath->is_open) { | ||
1311 | /* This can happen when this interface is added/removed | ||
1312 | to the bonding interface. Delete this station address | ||
1313 | from the linked list */ | ||
1314 | vxge_mac_list_del(vpath, &mac_info_old); | ||
1315 | |||
1316 | /* Add this new address to the linked list | ||
1317 | for later restoring */ | ||
1318 | vxge_mac_list_add(vpath, &mac_info_new); | ||
1319 | |||
1320 | continue; | ||
1321 | } | ||
1322 | /* Delete the station address */ | ||
1323 | mac_info_old.vpath_no = vpath_idx; | ||
1324 | status = vxge_del_mac_addr(vdev, &mac_info_old); | ||
1325 | } | ||
1326 | |||
1327 | if (unlikely(!is_vxge_card_up(vdev))) { | ||
1328 | memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | ||
1329 | return VXGE_HW_OK; | ||
1330 | } | ||
1331 | |||
1332 | /* Set this mac address to all the vpaths */ | ||
1333 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | ||
1334 | mac_info_new.vpath_no = vpath_idx; | ||
1335 | mac_info_new.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | ||
1336 | status = vxge_add_mac_addr(vdev, &mac_info_new); | ||
1337 | if (status != VXGE_HW_OK) | ||
1338 | return -EINVAL; | ||
1339 | } | ||
1340 | |||
1341 | memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | ||
1342 | |||
1343 | return status; | ||
1344 | } | ||
1345 | |||
1346 | /* | ||
1347 | * vxge_vpath_intr_enable | ||
1348 | * @vdev: pointer to vdev | ||
1349 | * @vp_id: vpath for which to enable the interrupts | ||
1350 | * | ||
1351 | * Enables the interrupts for the vpath | ||
1352 | */ | ||
1353 | void vxge_vpath_intr_enable(struct vxgedev *vdev, int vp_id) | ||
1354 | { | ||
1355 | struct vxge_vpath *vpath = &vdev->vpaths[vp_id]; | ||
1356 | int msix_id, alarm_msix_id; | ||
1357 | int tim_msix_id[4] = {[0 ...3] = 0}; | ||
1358 | |||
1359 | vxge_hw_vpath_intr_enable(vpath->handle); | ||
1360 | |||
1361 | if (vdev->config.intr_type == INTA) | ||
1362 | vxge_hw_vpath_inta_unmask_tx_rx(vpath->handle); | ||
1363 | else { | ||
1364 | msix_id = vp_id * VXGE_HW_VPATH_MSIX_ACTIVE; | ||
1365 | alarm_msix_id = | ||
1366 | VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | ||
1367 | |||
1368 | tim_msix_id[0] = msix_id; | ||
1369 | tim_msix_id[1] = msix_id + 1; | ||
1370 | vxge_hw_vpath_msix_set(vpath->handle, tim_msix_id, | ||
1371 | alarm_msix_id); | ||
1372 | |||
1373 | vxge_hw_vpath_msix_unmask(vpath->handle, msix_id); | ||
1374 | vxge_hw_vpath_msix_unmask(vpath->handle, msix_id + 1); | ||
1375 | |||
1376 | /* enable the alarm vector */ | ||
1377 | vxge_hw_vpath_msix_unmask(vpath->handle, alarm_msix_id); | ||
1378 | } | ||
1379 | } | ||
1380 | |||
1381 | /* | ||
1382 | * vxge_vpath_intr_disable | ||
1383 | * @vdev: pointer to vdev | ||
1384 | * @vp_id: vpath for which to disable the interrupts | ||
1385 | * | ||
1386 | * Disables the interrupts for the vpath | ||
1387 | */ | ||
1388 | void vxge_vpath_intr_disable(struct vxgedev *vdev, int vp_id) | ||
1389 | { | ||
1390 | struct vxge_vpath *vpath = &vdev->vpaths[vp_id]; | ||
1391 | int msix_id; | ||
1392 | |||
1393 | vxge_hw_vpath_intr_disable(vpath->handle); | ||
1394 | |||
1395 | if (vdev->config.intr_type == INTA) | ||
1396 | vxge_hw_vpath_inta_mask_tx_rx(vpath->handle); | ||
1397 | else { | ||
1398 | msix_id = vp_id * VXGE_HW_VPATH_MSIX_ACTIVE; | ||
1399 | vxge_hw_vpath_msix_mask(vpath->handle, msix_id); | ||
1400 | vxge_hw_vpath_msix_mask(vpath->handle, msix_id + 1); | ||
1401 | |||
1402 | /* disable the alarm vector */ | ||
1403 | msix_id = VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | ||
1404 | vxge_hw_vpath_msix_mask(vpath->handle, msix_id); | ||
1405 | } | ||
1406 | } | ||
1407 | |||
1408 | /* | ||
1409 | * vxge_reset_vpath | ||
1410 | * @vdev: pointer to vdev | ||
1411 | * @vp_id: vpath to reset | ||
1412 | * | ||
1413 | * Resets the vpath | ||
1414 | */ | ||
1415 | static int vxge_reset_vpath(struct vxgedev *vdev, int vp_id) | ||
1416 | { | ||
1417 | enum vxge_hw_status status = VXGE_HW_OK; | ||
1418 | int ret = 0; | ||
1419 | |||
1420 | /* check if device is down already */ | ||
1421 | if (unlikely(!is_vxge_card_up(vdev))) | ||
1422 | return 0; | ||
1423 | |||
1424 | /* is device reset already scheduled */ | ||
1425 | if (test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | ||
1426 | return 0; | ||
1427 | |||
1428 | if (vdev->vpaths[vp_id].handle) { | ||
1429 | if (vxge_hw_vpath_reset(vdev->vpaths[vp_id].handle) | ||
1430 | == VXGE_HW_OK) { | ||
1431 | if (is_vxge_card_up(vdev) && | ||
1432 | vxge_hw_vpath_recover_from_reset( | ||
1433 | vdev->vpaths[vp_id].handle) | ||
1434 | != VXGE_HW_OK) { | ||
1435 | vxge_debug_init(VXGE_ERR, | ||
1436 | "vxge_hw_vpath_recover_from_reset" | ||
1437 | "failed for vpath:%d", vp_id); | ||
1438 | return status; | ||
1439 | } | ||
1440 | } else { | ||
1441 | vxge_debug_init(VXGE_ERR, | ||
1442 | "vxge_hw_vpath_reset failed for" | ||
1443 | "vpath:%d", vp_id); | ||
1444 | return status; | ||
1445 | } | ||
1446 | } else | ||
1447 | return VXGE_HW_FAIL; | ||
1448 | |||
1449 | vxge_restore_vpath_mac_addr(&vdev->vpaths[vp_id]); | ||
1450 | vxge_restore_vpath_vid_table(&vdev->vpaths[vp_id]); | ||
1451 | |||
1452 | /* Enable all broadcast */ | ||
1453 | vxge_hw_vpath_bcast_enable(vdev->vpaths[vp_id].handle); | ||
1454 | |||
1455 | /* Enable the interrupts */ | ||
1456 | vxge_vpath_intr_enable(vdev, vp_id); | ||
1457 | |||
1458 | smp_wmb(); | ||
1459 | |||
1460 | /* Enable the flow of traffic through the vpath */ | ||
1461 | vxge_hw_vpath_enable(vdev->vpaths[vp_id].handle); | ||
1462 | |||
1463 | smp_wmb(); | ||
1464 | vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[vp_id].handle); | ||
1465 | vdev->vpaths[vp_id].ring.last_status = VXGE_HW_OK; | ||
1466 | |||
1467 | /* Vpath reset done */ | ||
1468 | clear_bit(vp_id, &vdev->vp_reset); | ||
1469 | |||
1470 | /* Start the vpath queue */ | ||
1471 | vxge_wake_tx_queue(&vdev->vpaths[vp_id].fifo, NULL); | ||
1472 | |||
1473 | return ret; | ||
1474 | } | ||
1475 | |||
1476 | static int do_vxge_reset(struct vxgedev *vdev, int event) | ||
1477 | { | ||
1478 | enum vxge_hw_status status; | ||
1479 | int ret = 0, vp_id, i; | ||
1480 | |||
1481 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | ||
1482 | |||
1483 | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) { | ||
1484 | /* check if device is down already */ | ||
1485 | if (unlikely(!is_vxge_card_up(vdev))) | ||
1486 | return 0; | ||
1487 | |||
1488 | /* is reset already scheduled */ | ||
1489 | if (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | ||
1490 | return 0; | ||
1491 | } | ||
1492 | |||
1493 | if (event == VXGE_LL_FULL_RESET) { | ||
1494 | /* wait for all the vpath reset to complete */ | ||
1495 | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | ||
1496 | while (test_bit(vp_id, &vdev->vp_reset)) | ||
1497 | msleep(50); | ||
1498 | } | ||
1499 | |||
1500 | /* if execution mode is set to debug, don't reset the adapter */ | ||
1501 | if (unlikely(vdev->exec_mode)) { | ||
1502 | vxge_debug_init(VXGE_ERR, | ||
1503 | "%s: execution mode is debug, returning..", | ||
1504 | vdev->ndev->name); | ||
1505 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | ||
1506 | vxge_stop_all_tx_queue(vdev); | ||
1507 | return 0; | ||
1508 | } | ||
1509 | } | ||
1510 | |||
1511 | if (event == VXGE_LL_FULL_RESET) { | ||
1512 | vxge_hw_device_intr_disable(vdev->devh); | ||
1513 | |||
1514 | switch (vdev->cric_err_event) { | ||
1515 | case VXGE_HW_EVENT_UNKNOWN: | ||
1516 | vxge_stop_all_tx_queue(vdev); | ||
1517 | vxge_debug_init(VXGE_ERR, | ||
1518 | "fatal: %s: Disabling device due to" | ||
1519 | "unknown error", | ||
1520 | vdev->ndev->name); | ||
1521 | ret = -EPERM; | ||
1522 | goto out; | ||
1523 | case VXGE_HW_EVENT_RESET_START: | ||
1524 | break; | ||
1525 | case VXGE_HW_EVENT_RESET_COMPLETE: | ||
1526 | case VXGE_HW_EVENT_LINK_DOWN: | ||
1527 | case VXGE_HW_EVENT_LINK_UP: | ||
1528 | case VXGE_HW_EVENT_ALARM_CLEARED: | ||
1529 | case VXGE_HW_EVENT_ECCERR: | ||
1530 | case VXGE_HW_EVENT_MRPCIM_ECCERR: | ||
1531 | ret = -EPERM; | ||
1532 | goto out; | ||
1533 | case VXGE_HW_EVENT_FIFO_ERR: | ||
1534 | case VXGE_HW_EVENT_VPATH_ERR: | ||
1535 | break; | ||
1536 | case VXGE_HW_EVENT_CRITICAL_ERR: | ||
1537 | vxge_stop_all_tx_queue(vdev); | ||
1538 | vxge_debug_init(VXGE_ERR, | ||
1539 | "fatal: %s: Disabling device due to" | ||
1540 | "serious error", | ||
1541 | vdev->ndev->name); | ||
1542 | /* SOP or device reset required */ | ||
1543 | /* This event is not currently used */ | ||
1544 | ret = -EPERM; | ||
1545 | goto out; | ||
1546 | case VXGE_HW_EVENT_SERR: | ||
1547 | vxge_stop_all_tx_queue(vdev); | ||
1548 | vxge_debug_init(VXGE_ERR, | ||
1549 | "fatal: %s: Disabling device due to" | ||
1550 | "serious error", | ||
1551 | vdev->ndev->name); | ||
1552 | ret = -EPERM; | ||
1553 | goto out; | ||
1554 | case VXGE_HW_EVENT_SRPCIM_SERR: | ||
1555 | case VXGE_HW_EVENT_MRPCIM_SERR: | ||
1556 | ret = -EPERM; | ||
1557 | goto out; | ||
1558 | case VXGE_HW_EVENT_SLOT_FREEZE: | ||
1559 | vxge_stop_all_tx_queue(vdev); | ||
1560 | vxge_debug_init(VXGE_ERR, | ||
1561 | "fatal: %s: Disabling device due to" | ||
1562 | "slot freeze", | ||
1563 | vdev->ndev->name); | ||
1564 | ret = -EPERM; | ||
1565 | goto out; | ||
1566 | default: | ||
1567 | break; | ||
1568 | |||
1569 | } | ||
1570 | } | ||
1571 | |||
1572 | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) | ||
1573 | vxge_stop_all_tx_queue(vdev); | ||
1574 | |||
1575 | if (event == VXGE_LL_FULL_RESET) { | ||
1576 | status = vxge_reset_all_vpaths(vdev); | ||
1577 | if (status != VXGE_HW_OK) { | ||
1578 | vxge_debug_init(VXGE_ERR, | ||
1579 | "fatal: %s: can not reset vpaths", | ||
1580 | vdev->ndev->name); | ||
1581 | ret = -EPERM; | ||
1582 | goto out; | ||
1583 | } | ||
1584 | } | ||
1585 | |||
1586 | if (event == VXGE_LL_COMPL_RESET) { | ||
1587 | for (i = 0; i < vdev->no_of_vpath; i++) | ||
1588 | if (vdev->vpaths[i].handle) { | ||
1589 | if (vxge_hw_vpath_recover_from_reset( | ||
1590 | vdev->vpaths[i].handle) | ||
1591 | != VXGE_HW_OK) { | ||
1592 | vxge_debug_init(VXGE_ERR, | ||
1593 | "vxge_hw_vpath_recover_" | ||
1594 | "from_reset failed for vpath: " | ||
1595 | "%d", i); | ||
1596 | ret = -EPERM; | ||
1597 | goto out; | ||
1598 | } | ||
1599 | } else { | ||
1600 | vxge_debug_init(VXGE_ERR, | ||
1601 | "vxge_hw_vpath_reset failed for " | ||
1602 | "vpath:%d", i); | ||
1603 | ret = -EPERM; | ||
1604 | goto out; | ||
1605 | } | ||
1606 | } | ||
1607 | |||
1608 | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) { | ||
1609 | /* Reprogram the DA table with populated mac addresses */ | ||
1610 | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | ||
1611 | vxge_restore_vpath_mac_addr(&vdev->vpaths[vp_id]); | ||
1612 | vxge_restore_vpath_vid_table(&vdev->vpaths[vp_id]); | ||
1613 | } | ||
1614 | |||
1615 | /* enable vpath interrupts */ | ||
1616 | for (i = 0; i < vdev->no_of_vpath; i++) | ||
1617 | vxge_vpath_intr_enable(vdev, i); | ||
1618 | |||
1619 | vxge_hw_device_intr_enable(vdev->devh); | ||
1620 | |||
1621 | smp_wmb(); | ||
1622 | |||
1623 | /* Indicate card up */ | ||
1624 | set_bit(__VXGE_STATE_CARD_UP, &vdev->state); | ||
1625 | |||
1626 | /* Get the traffic to flow through the vpaths */ | ||
1627 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
1628 | vxge_hw_vpath_enable(vdev->vpaths[i].handle); | ||
1629 | smp_wmb(); | ||
1630 | vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[i].handle); | ||
1631 | } | ||
1632 | |||
1633 | vxge_wake_all_tx_queue(vdev); | ||
1634 | } | ||
1635 | |||
1636 | out: | ||
1637 | vxge_debug_entryexit(VXGE_TRACE, | ||
1638 | "%s:%d Exiting...", __func__, __LINE__); | ||
1639 | |||
1640 | /* Indicate reset done */ | ||
1641 | if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) | ||
1642 | clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state); | ||
1643 | return ret; | ||
1644 | } | ||
1645 | |||
1646 | /* | ||
1647 | * vxge_reset | ||
1648 | * @vdev: pointer to ll device | ||
1649 | * | ||
1650 | * driver may reset the chip on events of serr, eccerr, etc | ||
1651 | */ | ||
1652 | int vxge_reset(struct vxgedev *vdev) | ||
1653 | { | ||
1654 | do_vxge_reset(vdev, VXGE_LL_FULL_RESET); | ||
1655 | return 0; | ||
1656 | } | ||
1657 | |||
1658 | /** | ||
1659 | * vxge_poll - Receive handler when Receive Polling is used. | ||
1660 | * @dev: pointer to the device structure. | ||
1661 | * @budget: Number of packets budgeted to be processed in this iteration. | ||
1662 | * | ||
1663 | * This function comes into picture only if Receive side is being handled | ||
1664 | * through polling (called NAPI in linux). It mostly does what the normal | ||
1665 | * Rx interrupt handler does in terms of descriptor and packet processing | ||
1666 | * but not in an interrupt context. Also it will process a specified number | ||
1667 | * of packets at most in one iteration. This value is passed down by the | ||
1668 | * kernel as the function argument 'budget'. | ||
1669 | */ | ||
1670 | static int vxge_poll_msix(struct napi_struct *napi, int budget) | ||
1671 | { | ||
1672 | struct vxge_ring *ring = | ||
1673 | container_of(napi, struct vxge_ring, napi); | ||
1674 | int budget_org = budget; | ||
1675 | ring->budget = budget; | ||
1676 | |||
1677 | vxge_hw_vpath_poll_rx(ring->handle); | ||
1678 | |||
1679 | if (ring->pkts_processed < budget_org) { | ||
1680 | napi_complete(napi); | ||
1681 | /* Re enable the Rx interrupts for the vpath */ | ||
1682 | vxge_hw_channel_msix_unmask( | ||
1683 | (struct __vxge_hw_channel *)ring->handle, | ||
1684 | ring->rx_vector_no); | ||
1685 | } | ||
1686 | |||
1687 | return ring->pkts_processed; | ||
1688 | } | ||
1689 | |||
1690 | static int vxge_poll_inta(struct napi_struct *napi, int budget) | ||
1691 | { | ||
1692 | struct vxgedev *vdev = container_of(napi, struct vxgedev, napi); | ||
1693 | int pkts_processed = 0; | ||
1694 | int i; | ||
1695 | int budget_org = budget; | ||
1696 | struct vxge_ring *ring; | ||
1697 | |||
1698 | struct __vxge_hw_device *hldev = (struct __vxge_hw_device *) | ||
1699 | pci_get_drvdata(vdev->pdev); | ||
1700 | |||
1701 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
1702 | ring = &vdev->vpaths[i].ring; | ||
1703 | ring->budget = budget; | ||
1704 | vxge_hw_vpath_poll_rx(ring->handle); | ||
1705 | pkts_processed += ring->pkts_processed; | ||
1706 | budget -= ring->pkts_processed; | ||
1707 | if (budget <= 0) | ||
1708 | break; | ||
1709 | } | ||
1710 | |||
1711 | VXGE_COMPLETE_ALL_TX(vdev); | ||
1712 | |||
1713 | if (pkts_processed < budget_org) { | ||
1714 | napi_complete(napi); | ||
1715 | /* Re enable the Rx interrupts for the ring */ | ||
1716 | vxge_hw_device_unmask_all(hldev); | ||
1717 | vxge_hw_device_flush_io(hldev); | ||
1718 | } | ||
1719 | |||
1720 | return pkts_processed; | ||
1721 | } | ||
1722 | |||
1723 | #ifdef CONFIG_NET_POLL_CONTROLLER | ||
1724 | /** | ||
1725 | * vxge_netpoll - netpoll event handler entry point | ||
1726 | * @dev : pointer to the device structure. | ||
1727 | * Description: | ||
1728 | * This function will be called by upper layer to check for events on the | ||
1729 | * interface in situations where interrupts are disabled. It is used for | ||
1730 | * specific in-kernel networking tasks, such as remote consoles and kernel | ||
1731 | * debugging over the network (example netdump in RedHat). | ||
1732 | */ | ||
1733 | static void vxge_netpoll(struct net_device *dev) | ||
1734 | { | ||
1735 | struct __vxge_hw_device *hldev; | ||
1736 | struct vxgedev *vdev; | ||
1737 | |||
1738 | vdev = (struct vxgedev *)netdev_priv(dev); | ||
1739 | hldev = (struct __vxge_hw_device *)pci_get_drvdata(vdev->pdev); | ||
1740 | |||
1741 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | ||
1742 | |||
1743 | if (pci_channel_offline(vdev->pdev)) | ||
1744 | return; | ||
1745 | |||
1746 | disable_irq(dev->irq); | ||
1747 | vxge_hw_device_clear_tx_rx(hldev); | ||
1748 | |||
1749 | vxge_hw_device_clear_tx_rx(hldev); | ||
1750 | VXGE_COMPLETE_ALL_RX(vdev); | ||
1751 | VXGE_COMPLETE_ALL_TX(vdev); | ||
1752 | |||
1753 | enable_irq(dev->irq); | ||
1754 | |||
1755 | vxge_debug_entryexit(VXGE_TRACE, | ||
1756 | "%s:%d Exiting...", __func__, __LINE__); | ||
1757 | return; | ||
1758 | } | ||
1759 | #endif | ||
1760 | |||
1761 | /* RTH configuration */ | ||
1762 | static enum vxge_hw_status vxge_rth_configure(struct vxgedev *vdev) | ||
1763 | { | ||
1764 | enum vxge_hw_status status = VXGE_HW_OK; | ||
1765 | struct vxge_hw_rth_hash_types hash_types; | ||
1766 | u8 itable[256] = {0}; /* indirection table */ | ||
1767 | u8 mtable[256] = {0}; /* CPU to vpath mapping */ | ||
1768 | int index; | ||
1769 | |||
1770 | /* | ||
1771 | * Filling | ||
1772 | * - itable with bucket numbers | ||
1773 | * - mtable with bucket-to-vpath mapping | ||
1774 | */ | ||
1775 | for (index = 0; index < (1 << vdev->config.rth_bkt_sz); index++) { | ||
1776 | itable[index] = index; | ||
1777 | mtable[index] = index % vdev->no_of_vpath; | ||
1778 | } | ||
1779 | |||
1780 | /* Fill RTH hash types */ | ||
1781 | hash_types.hash_type_tcpipv4_en = vdev->config.rth_hash_type_tcpipv4; | ||
1782 | hash_types.hash_type_ipv4_en = vdev->config.rth_hash_type_ipv4; | ||
1783 | hash_types.hash_type_tcpipv6_en = vdev->config.rth_hash_type_tcpipv6; | ||
1784 | hash_types.hash_type_ipv6_en = vdev->config.rth_hash_type_ipv6; | ||
1785 | hash_types.hash_type_tcpipv6ex_en = | ||
1786 | vdev->config.rth_hash_type_tcpipv6ex; | ||
1787 | hash_types.hash_type_ipv6ex_en = vdev->config.rth_hash_type_ipv6ex; | ||
1788 | |||
1789 | /* set indirection table, bucket-to-vpath mapping */ | ||
1790 | status = vxge_hw_vpath_rts_rth_itable_set(vdev->vp_handles, | ||
1791 | vdev->no_of_vpath, | ||
1792 | mtable, itable, | ||
1793 | vdev->config.rth_bkt_sz); | ||
1794 | if (status != VXGE_HW_OK) { | ||
1795 | vxge_debug_init(VXGE_ERR, | ||
1796 | "RTH indirection table configuration failed " | ||
1797 | "for vpath:%d", vdev->vpaths[0].device_id); | ||
1798 | return status; | ||
1799 | } | ||
1800 | |||
1801 | /* | ||
1802 | * Because the itable_set() method uses the active_table field | ||
1803 | * for the target virtual path the RTH config should be updated | ||
1804 | * for all VPATHs. The h/w only uses the lowest numbered VPATH | ||
1805 | * when steering frames. | ||
1806 | */ | ||
1807 | for (index = 0; index < vdev->no_of_vpath; index++) { | ||
1808 | status = vxge_hw_vpath_rts_rth_set( | ||
1809 | vdev->vpaths[index].handle, | ||
1810 | vdev->config.rth_algorithm, | ||
1811 | &hash_types, | ||
1812 | vdev->config.rth_bkt_sz); | ||
1813 | |||
1814 | if (status != VXGE_HW_OK) { | ||
1815 | vxge_debug_init(VXGE_ERR, | ||
1816 | "RTH configuration failed for vpath:%d", | ||
1817 | vdev->vpaths[index].device_id); | ||
1818 | return status; | ||
1819 | } | ||
1820 | } | ||
1821 | |||
1822 | return status; | ||
1823 | } | ||
1824 | |||
1825 | int vxge_mac_list_add(struct vxge_vpath *vpath, struct macInfo *mac) | ||
1826 | { | ||
1827 | struct vxge_mac_addrs *new_mac_entry; | ||
1828 | u8 *mac_address = NULL; | ||
1829 | |||
1830 | if (vpath->mac_addr_cnt >= VXGE_MAX_LEARN_MAC_ADDR_CNT) | ||
1831 | return TRUE; | ||
1832 | |||
1833 | new_mac_entry = kzalloc(sizeof(struct vxge_mac_addrs), GFP_ATOMIC); | ||
1834 | if (!new_mac_entry) { | ||
1835 | vxge_debug_mem(VXGE_ERR, | ||
1836 | "%s: memory allocation failed", | ||
1837 | VXGE_DRIVER_NAME); | ||
1838 | return FALSE; | ||
1839 | } | ||
1840 | |||
1841 | list_add(&new_mac_entry->item, &vpath->mac_addr_list); | ||
1842 | |||
1843 | /* Copy the new mac address to the list */ | ||
1844 | mac_address = (u8 *)&new_mac_entry->macaddr; | ||
1845 | memcpy(mac_address, mac->macaddr, ETH_ALEN); | ||
1846 | |||
1847 | new_mac_entry->state = mac->state; | ||
1848 | vpath->mac_addr_cnt++; | ||
1849 | |||
1850 | /* Is this a multicast address */ | ||
1851 | if (0x01 & mac->macaddr[0]) | ||
1852 | vpath->mcast_addr_cnt++; | ||
1853 | |||
1854 | return TRUE; | ||
1855 | } | ||
1856 | |||
1857 | /* Add a mac address to DA table */ | ||
1858 | enum vxge_hw_status vxge_add_mac_addr(struct vxgedev *vdev, struct macInfo *mac) | ||
1859 | { | ||
1860 | enum vxge_hw_status status = VXGE_HW_OK; | ||
1861 | struct vxge_vpath *vpath; | ||
1862 | enum vxge_hw_vpath_mac_addr_add_mode duplicate_mode; | ||
1863 | |||
1864 | if (0x01 & mac->macaddr[0]) /* multicast address */ | ||
1865 | duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE; | ||
1866 | else | ||
1867 | duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_REPLACE_DUPLICATE; | ||
1868 | |||
1869 | vpath = &vdev->vpaths[mac->vpath_no]; | ||
1870 | status = vxge_hw_vpath_mac_addr_add(vpath->handle, mac->macaddr, | ||
1871 | mac->macmask, duplicate_mode); | ||
1872 | if (status != VXGE_HW_OK) { | ||
1873 | vxge_debug_init(VXGE_ERR, | ||
1874 | "DA config add entry failed for vpath:%d", | ||
1875 | vpath->device_id); | ||
1876 | } else | ||
1877 | if (FALSE == vxge_mac_list_add(vpath, mac)) | ||
1878 | status = -EPERM; | ||
1879 | |||
1880 | return status; | ||
1881 | } | ||
1882 | |||
1883 | int vxge_mac_list_del(struct vxge_vpath *vpath, struct macInfo *mac) | ||
1884 | { | ||
1885 | struct list_head *entry, *next; | ||
1886 | u64 del_mac = 0; | ||
1887 | u8 *mac_address = (u8 *) (&del_mac); | ||
1888 | |||
1889 | /* Copy the mac address to delete from the list */ | ||
1890 | memcpy(mac_address, mac->macaddr, ETH_ALEN); | ||
1891 | |||
1892 | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | ||
1893 | if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) { | ||
1894 | list_del(entry); | ||
1895 | kfree((struct vxge_mac_addrs *)entry); | ||
1896 | vpath->mac_addr_cnt--; | ||
1897 | |||
1898 | /* Is this a multicast address */ | ||
1899 | if (0x01 & mac->macaddr[0]) | ||
1900 | vpath->mcast_addr_cnt--; | ||
1901 | return TRUE; | ||
1902 | } | ||
1903 | } | ||
1904 | |||
1905 | return FALSE; | ||
1906 | } | ||
1907 | /* delete a mac address from DA table */ | ||
1908 | enum vxge_hw_status vxge_del_mac_addr(struct vxgedev *vdev, struct macInfo *mac) | ||
1909 | { | ||
1910 | enum vxge_hw_status status = VXGE_HW_OK; | ||
1911 | struct vxge_vpath *vpath; | ||
1912 | |||
1913 | vpath = &vdev->vpaths[mac->vpath_no]; | ||
1914 | status = vxge_hw_vpath_mac_addr_delete(vpath->handle, mac->macaddr, | ||
1915 | mac->macmask); | ||
1916 | if (status != VXGE_HW_OK) { | ||
1917 | vxge_debug_init(VXGE_ERR, | ||
1918 | "DA config delete entry failed for vpath:%d", | ||
1919 | vpath->device_id); | ||
1920 | } else | ||
1921 | vxge_mac_list_del(vpath, mac); | ||
1922 | return status; | ||
1923 | } | ||
1924 | |||
1925 | /* list all mac addresses from DA table */ | ||
1926 | enum vxge_hw_status | ||
1927 | static vxge_search_mac_addr_in_da_table(struct vxge_vpath *vpath, | ||
1928 | struct macInfo *mac) | ||
1929 | { | ||
1930 | enum vxge_hw_status status = VXGE_HW_OK; | ||
1931 | unsigned char macmask[ETH_ALEN]; | ||
1932 | unsigned char macaddr[ETH_ALEN]; | ||
1933 | |||
1934 | status = vxge_hw_vpath_mac_addr_get(vpath->handle, | ||
1935 | macaddr, macmask); | ||
1936 | if (status != VXGE_HW_OK) { | ||
1937 | vxge_debug_init(VXGE_ERR, | ||
1938 | "DA config list entry failed for vpath:%d", | ||
1939 | vpath->device_id); | ||
1940 | return status; | ||
1941 | } | ||
1942 | |||
1943 | while (memcmp(mac->macaddr, macaddr, ETH_ALEN)) { | ||
1944 | |||
1945 | status = vxge_hw_vpath_mac_addr_get_next(vpath->handle, | ||
1946 | macaddr, macmask); | ||
1947 | if (status != VXGE_HW_OK) | ||
1948 | break; | ||
1949 | } | ||
1950 | |||
1951 | return status; | ||
1952 | } | ||
1953 | |||
1954 | /* Store all vlan ids from the list to the vid table */ | ||
1955 | enum vxge_hw_status vxge_restore_vpath_vid_table(struct vxge_vpath *vpath) | ||
1956 | { | ||
1957 | enum vxge_hw_status status = VXGE_HW_OK; | ||
1958 | struct vxgedev *vdev = vpath->vdev; | ||
1959 | u16 vid; | ||
1960 | |||
1961 | if (vdev->vlgrp && vpath->is_open) { | ||
1962 | |||
1963 | for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) { | ||
1964 | if (!vlan_group_get_device(vdev->vlgrp, vid)) | ||
1965 | continue; | ||
1966 | /* Add these vlan to the vid table */ | ||
1967 | status = vxge_hw_vpath_vid_add(vpath->handle, vid); | ||
1968 | } | ||
1969 | } | ||
1970 | |||
1971 | return status; | ||
1972 | } | ||
1973 | |||
1974 | /* Store all mac addresses from the list to the DA table */ | ||
1975 | enum vxge_hw_status vxge_restore_vpath_mac_addr(struct vxge_vpath *vpath) | ||
1976 | { | ||
1977 | enum vxge_hw_status status = VXGE_HW_OK; | ||
1978 | struct macInfo mac_info; | ||
1979 | u8 *mac_address = NULL; | ||
1980 | struct list_head *entry, *next; | ||
1981 | |||
1982 | memset(&mac_info, 0, sizeof(struct macInfo)); | ||
1983 | |||
1984 | if (vpath->is_open) { | ||
1985 | |||
1986 | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | ||
1987 | mac_address = | ||
1988 | (u8 *)& | ||
1989 | ((struct vxge_mac_addrs *)entry)->macaddr; | ||
1990 | memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | ||
1991 | ((struct vxge_mac_addrs *)entry)->state = | ||
1992 | VXGE_LL_MAC_ADDR_IN_DA_TABLE; | ||
1993 | /* does this mac address already exist in da table? */ | ||
1994 | status = vxge_search_mac_addr_in_da_table(vpath, | ||
1995 | &mac_info); | ||
1996 | if (status != VXGE_HW_OK) { | ||
1997 | /* Add this mac address to the DA table */ | ||
1998 | status = vxge_hw_vpath_mac_addr_add( | ||
1999 | vpath->handle, mac_info.macaddr, | ||
2000 | mac_info.macmask, | ||
2001 | VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE); | ||
2002 | if (status != VXGE_HW_OK) { | ||
2003 | vxge_debug_init(VXGE_ERR, | ||
2004 | "DA add entry failed for vpath:%d", | ||
2005 | vpath->device_id); | ||
2006 | ((struct vxge_mac_addrs *)entry)->state | ||
2007 | = VXGE_LL_MAC_ADDR_IN_LIST; | ||
2008 | } | ||
2009 | } | ||
2010 | } | ||
2011 | } | ||
2012 | |||
2013 | return status; | ||
2014 | } | ||
2015 | |||
2016 | /* reset vpaths */ | ||
2017 | enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev) | ||
2018 | { | ||
2019 | int i; | ||
2020 | enum vxge_hw_status status = VXGE_HW_OK; | ||
2021 | |||
2022 | for (i = 0; i < vdev->no_of_vpath; i++) | ||
2023 | if (vdev->vpaths[i].handle) { | ||
2024 | if (vxge_hw_vpath_reset(vdev->vpaths[i].handle) | ||
2025 | == VXGE_HW_OK) { | ||
2026 | if (is_vxge_card_up(vdev) && | ||
2027 | vxge_hw_vpath_recover_from_reset( | ||
2028 | vdev->vpaths[i].handle) | ||
2029 | != VXGE_HW_OK) { | ||
2030 | vxge_debug_init(VXGE_ERR, | ||
2031 | "vxge_hw_vpath_recover_" | ||
2032 | "from_reset failed for vpath: " | ||
2033 | "%d", i); | ||
2034 | return status; | ||
2035 | } | ||
2036 | } else { | ||
2037 | vxge_debug_init(VXGE_ERR, | ||
2038 | "vxge_hw_vpath_reset failed for " | ||
2039 | "vpath:%d", i); | ||
2040 | return status; | ||
2041 | } | ||
2042 | } | ||
2043 | return status; | ||
2044 | } | ||
2045 | |||
2046 | /* close vpaths */ | ||
2047 | void vxge_close_vpaths(struct vxgedev *vdev, int index) | ||
2048 | { | ||
2049 | int i; | ||
2050 | for (i = index; i < vdev->no_of_vpath; i++) { | ||
2051 | if (vdev->vpaths[i].handle && vdev->vpaths[i].is_open) { | ||
2052 | vxge_hw_vpath_close(vdev->vpaths[i].handle); | ||
2053 | vdev->stats.vpaths_open--; | ||
2054 | } | ||
2055 | vdev->vpaths[i].is_open = 0; | ||
2056 | vdev->vpaths[i].handle = NULL; | ||
2057 | } | ||
2058 | } | ||
2059 | |||
2060 | /* open vpaths */ | ||
2061 | int vxge_open_vpaths(struct vxgedev *vdev) | ||
2062 | { | ||
2063 | enum vxge_hw_status status; | ||
2064 | int i; | ||
2065 | u32 vp_id = 0; | ||
2066 | struct vxge_hw_vpath_attr attr; | ||
2067 | |||
2068 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
2069 | vxge_assert(vdev->vpaths[i].is_configured); | ||
2070 | attr.vp_id = vdev->vpaths[i].device_id; | ||
2071 | attr.fifo_attr.callback = vxge_xmit_compl; | ||
2072 | attr.fifo_attr.txdl_term = vxge_tx_term; | ||
2073 | attr.fifo_attr.per_txdl_space = sizeof(struct vxge_tx_priv); | ||
2074 | attr.fifo_attr.userdata = (void *)&vdev->vpaths[i].fifo; | ||
2075 | |||
2076 | attr.ring_attr.callback = vxge_rx_1b_compl; | ||
2077 | attr.ring_attr.rxd_init = vxge_rx_initial_replenish; | ||
2078 | attr.ring_attr.rxd_term = vxge_rx_term; | ||
2079 | attr.ring_attr.per_rxd_space = sizeof(struct vxge_rx_priv); | ||
2080 | attr.ring_attr.userdata = (void *)&vdev->vpaths[i].ring; | ||
2081 | |||
2082 | vdev->vpaths[i].ring.ndev = vdev->ndev; | ||
2083 | vdev->vpaths[i].ring.pdev = vdev->pdev; | ||
2084 | status = vxge_hw_vpath_open(vdev->devh, &attr, | ||
2085 | &(vdev->vpaths[i].handle)); | ||
2086 | if (status == VXGE_HW_OK) { | ||
2087 | vdev->vpaths[i].fifo.handle = | ||
2088 | (struct __vxge_hw_fifo *)attr.fifo_attr.userdata; | ||
2089 | vdev->vpaths[i].ring.handle = | ||
2090 | (struct __vxge_hw_ring *)attr.ring_attr.userdata; | ||
2091 | vdev->vpaths[i].fifo.tx_steering_type = | ||
2092 | vdev->config.tx_steering_type; | ||
2093 | vdev->vpaths[i].fifo.ndev = vdev->ndev; | ||
2094 | vdev->vpaths[i].fifo.pdev = vdev->pdev; | ||
2095 | vdev->vpaths[i].fifo.indicate_max_pkts = | ||
2096 | vdev->config.fifo_indicate_max_pkts; | ||
2097 | vdev->vpaths[i].ring.rx_vector_no = 0; | ||
2098 | vdev->vpaths[i].ring.rx_csum = vdev->rx_csum; | ||
2099 | vdev->vpaths[i].is_open = 1; | ||
2100 | vdev->vp_handles[i] = vdev->vpaths[i].handle; | ||
2101 | vdev->vpaths[i].ring.gro_enable = | ||
2102 | vdev->config.gro_enable; | ||
2103 | vdev->vpaths[i].ring.vlan_tag_strip = | ||
2104 | vdev->vlan_tag_strip; | ||
2105 | vdev->stats.vpaths_open++; | ||
2106 | } else { | ||
2107 | vdev->stats.vpath_open_fail++; | ||
2108 | vxge_debug_init(VXGE_ERR, | ||
2109 | "%s: vpath: %d failed to open " | ||
2110 | "with status: %d", | ||
2111 | vdev->ndev->name, vdev->vpaths[i].device_id, | ||
2112 | status); | ||
2113 | vxge_close_vpaths(vdev, 0); | ||
2114 | return -EPERM; | ||
2115 | } | ||
2116 | |||
2117 | vp_id = | ||
2118 | ((struct __vxge_hw_vpath_handle *)vdev->vpaths[i].handle)-> | ||
2119 | vpath->vp_id; | ||
2120 | vdev->vpaths_deployed |= vxge_mBIT(vp_id); | ||
2121 | } | ||
2122 | return VXGE_HW_OK; | ||
2123 | } | ||
2124 | |||
2125 | /* | ||
2126 | * vxge_isr_napi | ||
2127 | * @irq: the irq of the device. | ||
2128 | * @dev_id: a void pointer to the hldev structure of the Titan device | ||
2129 | * @ptregs: pointer to the registers pushed on the stack. | ||
2130 | * | ||
2131 | * This function is the ISR handler of the device when napi is enabled. It | ||
2132 | * identifies the reason for the interrupt and calls the relevant service | ||
2133 | * routines. | ||
2134 | */ | ||
2135 | static irqreturn_t vxge_isr_napi(int irq, void *dev_id) | ||
2136 | { | ||
2137 | struct __vxge_hw_device *hldev = (struct __vxge_hw_device *)dev_id; | ||
2138 | struct vxgedev *vdev; | ||
2139 | struct net_device *dev; | ||
2140 | u64 reason; | ||
2141 | enum vxge_hw_status status; | ||
2142 | |||
2143 | vxge_debug_intr(VXGE_TRACE, "%s:%d", __func__, __LINE__); | ||
2144 | |||
2145 | dev = hldev->ndev; | ||
2146 | vdev = netdev_priv(dev); | ||
2147 | |||
2148 | if (pci_channel_offline(vdev->pdev)) | ||
2149 | return IRQ_NONE; | ||
2150 | |||
2151 | if (unlikely(!is_vxge_card_up(vdev))) | ||
2152 | return IRQ_NONE; | ||
2153 | |||
2154 | status = vxge_hw_device_begin_irq(hldev, vdev->exec_mode, | ||
2155 | &reason); | ||
2156 | if (status == VXGE_HW_OK) { | ||
2157 | vxge_hw_device_mask_all(hldev); | ||
2158 | |||
2159 | if (reason & | ||
2160 | VXGE_HW_TITAN_GENERAL_INT_STATUS_VPATH_TRAFFIC_INT( | ||
2161 | vdev->vpaths_deployed >> | ||
2162 | (64 - VXGE_HW_MAX_VIRTUAL_PATHS))) { | ||
2163 | |||
2164 | vxge_hw_device_clear_tx_rx(hldev); | ||
2165 | napi_schedule(&vdev->napi); | ||
2166 | vxge_debug_intr(VXGE_TRACE, | ||
2167 | "%s:%d Exiting...", __func__, __LINE__); | ||
2168 | return IRQ_HANDLED; | ||
2169 | } else | ||
2170 | vxge_hw_device_unmask_all(hldev); | ||
2171 | } else if (unlikely((status == VXGE_HW_ERR_VPATH) || | ||
2172 | (status == VXGE_HW_ERR_CRITICAL) || | ||
2173 | (status == VXGE_HW_ERR_FIFO))) { | ||
2174 | vxge_hw_device_mask_all(hldev); | ||
2175 | vxge_hw_device_flush_io(hldev); | ||
2176 | return IRQ_HANDLED; | ||
2177 | } else if (unlikely(status == VXGE_HW_ERR_SLOT_FREEZE)) | ||
2178 | return IRQ_HANDLED; | ||
2179 | |||
2180 | vxge_debug_intr(VXGE_TRACE, "%s:%d Exiting...", __func__, __LINE__); | ||
2181 | return IRQ_NONE; | ||
2182 | } | ||
2183 | |||
2184 | #ifdef CONFIG_PCI_MSI | ||
2185 | |||
2186 | static irqreturn_t | ||
2187 | vxge_tx_msix_handle(int irq, void *dev_id) | ||
2188 | { | ||
2189 | struct vxge_fifo *fifo = (struct vxge_fifo *)dev_id; | ||
2190 | |||
2191 | VXGE_COMPLETE_VPATH_TX(fifo); | ||
2192 | |||
2193 | return IRQ_HANDLED; | ||
2194 | } | ||
2195 | |||
2196 | static irqreturn_t | ||
2197 | vxge_rx_msix_napi_handle(int irq, void *dev_id) | ||
2198 | { | ||
2199 | struct vxge_ring *ring = (struct vxge_ring *)dev_id; | ||
2200 | |||
2201 | /* MSIX_IDX for Rx is 1 */ | ||
2202 | vxge_hw_channel_msix_mask((struct __vxge_hw_channel *)ring->handle, | ||
2203 | ring->rx_vector_no); | ||
2204 | |||
2205 | napi_schedule(&ring->napi); | ||
2206 | return IRQ_HANDLED; | ||
2207 | } | ||
2208 | |||
2209 | static irqreturn_t | ||
2210 | vxge_alarm_msix_handle(int irq, void *dev_id) | ||
2211 | { | ||
2212 | int i; | ||
2213 | enum vxge_hw_status status; | ||
2214 | struct vxge_vpath *vpath = (struct vxge_vpath *)dev_id; | ||
2215 | struct vxgedev *vdev = vpath->vdev; | ||
2216 | int alarm_msix_id = | ||
2217 | VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | ||
2218 | |||
2219 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
2220 | vxge_hw_vpath_msix_mask(vdev->vpaths[i].handle, | ||
2221 | alarm_msix_id); | ||
2222 | |||
2223 | status = vxge_hw_vpath_alarm_process(vdev->vpaths[i].handle, | ||
2224 | vdev->exec_mode); | ||
2225 | if (status == VXGE_HW_OK) { | ||
2226 | |||
2227 | vxge_hw_vpath_msix_unmask(vdev->vpaths[i].handle, | ||
2228 | alarm_msix_id); | ||
2229 | continue; | ||
2230 | } | ||
2231 | vxge_debug_intr(VXGE_ERR, | ||
2232 | "%s: vxge_hw_vpath_alarm_process failed %x ", | ||
2233 | VXGE_DRIVER_NAME, status); | ||
2234 | } | ||
2235 | return IRQ_HANDLED; | ||
2236 | } | ||
2237 | |||
2238 | static int vxge_alloc_msix(struct vxgedev *vdev) | ||
2239 | { | ||
2240 | int j, i, ret = 0; | ||
2241 | int intr_cnt = 0; | ||
2242 | int alarm_msix_id = 0, msix_intr_vect = 0; | ||
2243 | vdev->intr_cnt = 0; | ||
2244 | |||
2245 | /* Tx/Rx MSIX Vectors count */ | ||
2246 | vdev->intr_cnt = vdev->no_of_vpath * 2; | ||
2247 | |||
2248 | /* Alarm MSIX Vectors count */ | ||
2249 | vdev->intr_cnt++; | ||
2250 | |||
2251 | intr_cnt = (vdev->max_vpath_supported * 2) + 1; | ||
2252 | vdev->entries = kzalloc(intr_cnt * sizeof(struct msix_entry), | ||
2253 | GFP_KERNEL); | ||
2254 | if (!vdev->entries) { | ||
2255 | vxge_debug_init(VXGE_ERR, | ||
2256 | "%s: memory allocation failed", | ||
2257 | VXGE_DRIVER_NAME); | ||
2258 | return -ENOMEM; | ||
2259 | } | ||
2260 | |||
2261 | vdev->vxge_entries = kzalloc(intr_cnt * sizeof(struct vxge_msix_entry), | ||
2262 | GFP_KERNEL); | ||
2263 | if (!vdev->vxge_entries) { | ||
2264 | vxge_debug_init(VXGE_ERR, "%s: memory allocation failed", | ||
2265 | VXGE_DRIVER_NAME); | ||
2266 | kfree(vdev->entries); | ||
2267 | return -ENOMEM; | ||
2268 | } | ||
2269 | |||
2270 | /* Last vector in the list is used for alarm */ | ||
2271 | alarm_msix_id = VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | ||
2272 | for (i = 0, j = 0; i < vdev->max_vpath_supported; i++) { | ||
2273 | |||
2274 | msix_intr_vect = i * VXGE_HW_VPATH_MSIX_ACTIVE; | ||
2275 | |||
2276 | /* Initialize the fifo vector */ | ||
2277 | vdev->entries[j].entry = msix_intr_vect; | ||
2278 | vdev->vxge_entries[j].entry = msix_intr_vect; | ||
2279 | vdev->vxge_entries[j].in_use = 0; | ||
2280 | j++; | ||
2281 | |||
2282 | /* Initialize the ring vector */ | ||
2283 | vdev->entries[j].entry = msix_intr_vect + 1; | ||
2284 | vdev->vxge_entries[j].entry = msix_intr_vect + 1; | ||
2285 | vdev->vxge_entries[j].in_use = 0; | ||
2286 | j++; | ||
2287 | } | ||
2288 | |||
2289 | /* Initialize the alarm vector */ | ||
2290 | vdev->entries[j].entry = alarm_msix_id; | ||
2291 | vdev->vxge_entries[j].entry = alarm_msix_id; | ||
2292 | vdev->vxge_entries[j].in_use = 0; | ||
2293 | |||
2294 | ret = pci_enable_msix(vdev->pdev, vdev->entries, intr_cnt); | ||
2295 | /* if driver request exceeeds available irq's, request with a small | ||
2296 | * number. | ||
2297 | */ | ||
2298 | if (ret > 0) { | ||
2299 | vxge_debug_init(VXGE_ERR, | ||
2300 | "%s: MSI-X enable failed for %d vectors, available: %d", | ||
2301 | VXGE_DRIVER_NAME, intr_cnt, ret); | ||
2302 | vdev->max_vpath_supported = vdev->no_of_vpath; | ||
2303 | intr_cnt = (vdev->max_vpath_supported * 2) + 1; | ||
2304 | |||
2305 | /* Reset the alarm vector setting */ | ||
2306 | vdev->entries[j].entry = 0; | ||
2307 | vdev->vxge_entries[j].entry = 0; | ||
2308 | |||
2309 | /* Initialize the alarm vector with new setting */ | ||
2310 | vdev->entries[intr_cnt - 1].entry = alarm_msix_id; | ||
2311 | vdev->vxge_entries[intr_cnt - 1].entry = alarm_msix_id; | ||
2312 | vdev->vxge_entries[intr_cnt - 1].in_use = 0; | ||
2313 | |||
2314 | ret = pci_enable_msix(vdev->pdev, vdev->entries, intr_cnt); | ||
2315 | if (!ret) | ||
2316 | vxge_debug_init(VXGE_ERR, | ||
2317 | "%s: MSI-X enabled for %d vectors", | ||
2318 | VXGE_DRIVER_NAME, intr_cnt); | ||
2319 | } | ||
2320 | |||
2321 | if (ret) { | ||
2322 | vxge_debug_init(VXGE_ERR, | ||
2323 | "%s: MSI-X enable failed for %d vectors, ret: %d", | ||
2324 | VXGE_DRIVER_NAME, intr_cnt, ret); | ||
2325 | kfree(vdev->entries); | ||
2326 | kfree(vdev->vxge_entries); | ||
2327 | vdev->entries = NULL; | ||
2328 | vdev->vxge_entries = NULL; | ||
2329 | return -ENODEV; | ||
2330 | } | ||
2331 | return 0; | ||
2332 | } | ||
2333 | |||
2334 | static int vxge_enable_msix(struct vxgedev *vdev) | ||
2335 | { | ||
2336 | |||
2337 | int i, ret = 0; | ||
2338 | enum vxge_hw_status status; | ||
2339 | /* 0 - Tx, 1 - Rx */ | ||
2340 | int tim_msix_id[4]; | ||
2341 | int alarm_msix_id = 0, msix_intr_vect = 0;; | ||
2342 | vdev->intr_cnt = 0; | ||
2343 | |||
2344 | /* allocate msix vectors */ | ||
2345 | ret = vxge_alloc_msix(vdev); | ||
2346 | if (!ret) { | ||
2347 | /* Last vector in the list is used for alarm */ | ||
2348 | alarm_msix_id = | ||
2349 | VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | ||
2350 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
2351 | |||
2352 | /* If fifo or ring are not enabled | ||
2353 | the MSIX vector for that should be set to 0 | ||
2354 | Hence initializeing this array to all 0s. | ||
2355 | */ | ||
2356 | memset(tim_msix_id, 0, sizeof(tim_msix_id)); | ||
2357 | msix_intr_vect = i * VXGE_HW_VPATH_MSIX_ACTIVE; | ||
2358 | tim_msix_id[0] = msix_intr_vect; | ||
2359 | |||
2360 | tim_msix_id[1] = msix_intr_vect + 1; | ||
2361 | vdev->vpaths[i].ring.rx_vector_no = tim_msix_id[1]; | ||
2362 | |||
2363 | status = vxge_hw_vpath_msix_set( | ||
2364 | vdev->vpaths[i].handle, | ||
2365 | tim_msix_id, alarm_msix_id); | ||
2366 | if (status != VXGE_HW_OK) { | ||
2367 | vxge_debug_init(VXGE_ERR, | ||
2368 | "vxge_hw_vpath_msix_set " | ||
2369 | "failed with status : %x", status); | ||
2370 | kfree(vdev->entries); | ||
2371 | kfree(vdev->vxge_entries); | ||
2372 | pci_disable_msix(vdev->pdev); | ||
2373 | return -ENODEV; | ||
2374 | } | ||
2375 | } | ||
2376 | } | ||
2377 | |||
2378 | return ret; | ||
2379 | } | ||
2380 | |||
2381 | static void vxge_rem_msix_isr(struct vxgedev *vdev) | ||
2382 | { | ||
2383 | int intr_cnt; | ||
2384 | |||
2385 | for (intr_cnt = 0; intr_cnt < (vdev->max_vpath_supported * 2 + 1); | ||
2386 | intr_cnt++) { | ||
2387 | if (vdev->vxge_entries[intr_cnt].in_use) { | ||
2388 | synchronize_irq(vdev->entries[intr_cnt].vector); | ||
2389 | free_irq(vdev->entries[intr_cnt].vector, | ||
2390 | vdev->vxge_entries[intr_cnt].arg); | ||
2391 | vdev->vxge_entries[intr_cnt].in_use = 0; | ||
2392 | } | ||
2393 | } | ||
2394 | |||
2395 | kfree(vdev->entries); | ||
2396 | kfree(vdev->vxge_entries); | ||
2397 | vdev->entries = NULL; | ||
2398 | vdev->vxge_entries = NULL; | ||
2399 | |||
2400 | if (vdev->config.intr_type == MSI_X) | ||
2401 | pci_disable_msix(vdev->pdev); | ||
2402 | } | ||
2403 | #endif | ||
2404 | |||
2405 | static void vxge_rem_isr(struct vxgedev *vdev) | ||
2406 | { | ||
2407 | struct __vxge_hw_device *hldev; | ||
2408 | hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | ||
2409 | |||
2410 | #ifdef CONFIG_PCI_MSI | ||
2411 | if (vdev->config.intr_type == MSI_X) { | ||
2412 | vxge_rem_msix_isr(vdev); | ||
2413 | } else | ||
2414 | #endif | ||
2415 | if (vdev->config.intr_type == INTA) { | ||
2416 | synchronize_irq(vdev->pdev->irq); | ||
2417 | free_irq(vdev->pdev->irq, hldev); | ||
2418 | } | ||
2419 | } | ||
2420 | |||
2421 | static int vxge_add_isr(struct vxgedev *vdev) | ||
2422 | { | ||
2423 | int ret = 0; | ||
2424 | struct __vxge_hw_device *hldev = | ||
2425 | (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | ||
2426 | #ifdef CONFIG_PCI_MSI | ||
2427 | int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0; | ||
2428 | u64 function_mode = vdev->config.device_hw_info.function_mode; | ||
2429 | int pci_fun = PCI_FUNC(vdev->pdev->devfn); | ||
2430 | |||
2431 | if (vdev->config.intr_type == MSI_X) | ||
2432 | ret = vxge_enable_msix(vdev); | ||
2433 | |||
2434 | if (ret) { | ||
2435 | vxge_debug_init(VXGE_ERR, | ||
2436 | "%s: Enabling MSI-X Failed", VXGE_DRIVER_NAME); | ||
2437 | if ((function_mode == VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) && | ||
2438 | test_and_set_bit(__VXGE_STATE_CARD_UP, | ||
2439 | &driver_config->inta_dev_open)) | ||
2440 | return VXGE_HW_FAIL; | ||
2441 | else { | ||
2442 | vxge_debug_init(VXGE_ERR, | ||
2443 | "%s: Defaulting to INTA", VXGE_DRIVER_NAME); | ||
2444 | vdev->config.intr_type = INTA; | ||
2445 | vxge_hw_device_set_intr_type(vdev->devh, | ||
2446 | VXGE_HW_INTR_MODE_IRQLINE); | ||
2447 | vxge_close_vpaths(vdev, 1); | ||
2448 | vdev->no_of_vpath = 1; | ||
2449 | vdev->stats.vpaths_open = 1; | ||
2450 | } | ||
2451 | } | ||
2452 | |||
2453 | if (vdev->config.intr_type == MSI_X) { | ||
2454 | for (intr_idx = 0; | ||
2455 | intr_idx < (vdev->no_of_vpath * | ||
2456 | VXGE_HW_VPATH_MSIX_ACTIVE); intr_idx++) { | ||
2457 | |||
2458 | msix_idx = intr_idx % VXGE_HW_VPATH_MSIX_ACTIVE; | ||
2459 | irq_req = 0; | ||
2460 | |||
2461 | switch (msix_idx) { | ||
2462 | case 0: | ||
2463 | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | ||
2464 | "%s:vxge fn: %d vpath: %d Tx MSI-X: %d", | ||
2465 | vdev->ndev->name, pci_fun, vp_idx, | ||
2466 | vdev->entries[intr_cnt].entry); | ||
2467 | ret = request_irq( | ||
2468 | vdev->entries[intr_cnt].vector, | ||
2469 | vxge_tx_msix_handle, 0, | ||
2470 | vdev->desc[intr_cnt], | ||
2471 | &vdev->vpaths[vp_idx].fifo); | ||
2472 | vdev->vxge_entries[intr_cnt].arg = | ||
2473 | &vdev->vpaths[vp_idx].fifo; | ||
2474 | irq_req = 1; | ||
2475 | break; | ||
2476 | case 1: | ||
2477 | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | ||
2478 | "%s:vxge fn: %d vpath: %d Rx MSI-X: %d", | ||
2479 | vdev->ndev->name, pci_fun, vp_idx, | ||
2480 | vdev->entries[intr_cnt].entry); | ||
2481 | ret = request_irq( | ||
2482 | vdev->entries[intr_cnt].vector, | ||
2483 | vxge_rx_msix_napi_handle, | ||
2484 | 0, | ||
2485 | vdev->desc[intr_cnt], | ||
2486 | &vdev->vpaths[vp_idx].ring); | ||
2487 | vdev->vxge_entries[intr_cnt].arg = | ||
2488 | &vdev->vpaths[vp_idx].ring; | ||
2489 | irq_req = 1; | ||
2490 | break; | ||
2491 | } | ||
2492 | |||
2493 | if (ret) { | ||
2494 | vxge_debug_init(VXGE_ERR, | ||
2495 | "%s: MSIX - %d Registration failed", | ||
2496 | vdev->ndev->name, intr_cnt); | ||
2497 | vxge_rem_msix_isr(vdev); | ||
2498 | if ((function_mode == | ||
2499 | VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) && | ||
2500 | test_and_set_bit(__VXGE_STATE_CARD_UP, | ||
2501 | &driver_config->inta_dev_open)) | ||
2502 | return VXGE_HW_FAIL; | ||
2503 | else { | ||
2504 | vxge_hw_device_set_intr_type( | ||
2505 | vdev->devh, | ||
2506 | VXGE_HW_INTR_MODE_IRQLINE); | ||
2507 | vdev->config.intr_type = INTA; | ||
2508 | vxge_debug_init(VXGE_ERR, | ||
2509 | "%s: Defaulting to INTA" | ||
2510 | , vdev->ndev->name); | ||
2511 | vxge_close_vpaths(vdev, 1); | ||
2512 | vdev->no_of_vpath = 1; | ||
2513 | vdev->stats.vpaths_open = 1; | ||
2514 | goto INTA_MODE; | ||
2515 | } | ||
2516 | } | ||
2517 | |||
2518 | if (irq_req) { | ||
2519 | /* We requested for this msix interrupt */ | ||
2520 | vdev->vxge_entries[intr_cnt].in_use = 1; | ||
2521 | vxge_hw_vpath_msix_unmask( | ||
2522 | vdev->vpaths[vp_idx].handle, | ||
2523 | intr_idx); | ||
2524 | intr_cnt++; | ||
2525 | } | ||
2526 | |||
2527 | /* Point to next vpath handler */ | ||
2528 | if (((intr_idx + 1) % VXGE_HW_VPATH_MSIX_ACTIVE == 0) | ||
2529 | && (vp_idx < (vdev->no_of_vpath - 1))) | ||
2530 | vp_idx++; | ||
2531 | } | ||
2532 | |||
2533 | intr_cnt = vdev->max_vpath_supported * 2; | ||
2534 | snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | ||
2535 | "%s:vxge Alarm fn: %d MSI-X: %d", | ||
2536 | vdev->ndev->name, pci_fun, | ||
2537 | vdev->entries[intr_cnt].entry); | ||
2538 | /* For Alarm interrupts */ | ||
2539 | ret = request_irq(vdev->entries[intr_cnt].vector, | ||
2540 | vxge_alarm_msix_handle, 0, | ||
2541 | vdev->desc[intr_cnt], | ||
2542 | &vdev->vpaths[vp_idx]); | ||
2543 | if (ret) { | ||
2544 | vxge_debug_init(VXGE_ERR, | ||
2545 | "%s: MSIX - %d Registration failed", | ||
2546 | vdev->ndev->name, intr_cnt); | ||
2547 | vxge_rem_msix_isr(vdev); | ||
2548 | if ((function_mode == | ||
2549 | VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) && | ||
2550 | test_and_set_bit(__VXGE_STATE_CARD_UP, | ||
2551 | &driver_config->inta_dev_open)) | ||
2552 | return VXGE_HW_FAIL; | ||
2553 | else { | ||
2554 | vxge_hw_device_set_intr_type(vdev->devh, | ||
2555 | VXGE_HW_INTR_MODE_IRQLINE); | ||
2556 | vdev->config.intr_type = INTA; | ||
2557 | vxge_debug_init(VXGE_ERR, | ||
2558 | "%s: Defaulting to INTA", | ||
2559 | vdev->ndev->name); | ||
2560 | vxge_close_vpaths(vdev, 1); | ||
2561 | vdev->no_of_vpath = 1; | ||
2562 | vdev->stats.vpaths_open = 1; | ||
2563 | goto INTA_MODE; | ||
2564 | } | ||
2565 | } | ||
2566 | |||
2567 | vxge_hw_vpath_msix_unmask(vdev->vpaths[vp_idx].handle, | ||
2568 | intr_idx - 2); | ||
2569 | vdev->vxge_entries[intr_cnt].in_use = 1; | ||
2570 | vdev->vxge_entries[intr_cnt].arg = &vdev->vpaths[vp_idx]; | ||
2571 | } | ||
2572 | INTA_MODE: | ||
2573 | #endif | ||
2574 | snprintf(vdev->desc[0], VXGE_INTR_STRLEN, "%s:vxge", vdev->ndev->name); | ||
2575 | |||
2576 | if (vdev->config.intr_type == INTA) { | ||
2577 | ret = request_irq((int) vdev->pdev->irq, | ||
2578 | vxge_isr_napi, | ||
2579 | IRQF_SHARED, vdev->desc[0], hldev); | ||
2580 | if (ret) { | ||
2581 | vxge_debug_init(VXGE_ERR, | ||
2582 | "%s %s-%d: ISR registration failed", | ||
2583 | VXGE_DRIVER_NAME, "IRQ", vdev->pdev->irq); | ||
2584 | return -ENODEV; | ||
2585 | } | ||
2586 | vxge_debug_init(VXGE_TRACE, | ||
2587 | "new %s-%d line allocated", | ||
2588 | "IRQ", vdev->pdev->irq); | ||
2589 | } | ||
2590 | |||
2591 | return VXGE_HW_OK; | ||
2592 | } | ||
2593 | |||
2594 | static void vxge_poll_vp_reset(unsigned long data) | ||
2595 | { | ||
2596 | struct vxgedev *vdev = (struct vxgedev *)data; | ||
2597 | int i, j = 0; | ||
2598 | |||
2599 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
2600 | if (test_bit(i, &vdev->vp_reset)) { | ||
2601 | vxge_reset_vpath(vdev, i); | ||
2602 | j++; | ||
2603 | } | ||
2604 | } | ||
2605 | if (j && (vdev->config.intr_type != MSI_X)) { | ||
2606 | vxge_hw_device_unmask_all(vdev->devh); | ||
2607 | vxge_hw_device_flush_io(vdev->devh); | ||
2608 | } | ||
2609 | |||
2610 | mod_timer(&vdev->vp_reset_timer, jiffies + HZ / 2); | ||
2611 | } | ||
2612 | |||
2613 | static void vxge_poll_vp_lockup(unsigned long data) | ||
2614 | { | ||
2615 | struct vxgedev *vdev = (struct vxgedev *)data; | ||
2616 | int i; | ||
2617 | struct vxge_ring *ring; | ||
2618 | enum vxge_hw_status status = VXGE_HW_OK; | ||
2619 | |||
2620 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
2621 | ring = &vdev->vpaths[i].ring; | ||
2622 | /* Did this vpath received any packets */ | ||
2623 | if (ring->stats.prev_rx_frms == ring->stats.rx_frms) { | ||
2624 | status = vxge_hw_vpath_check_leak(ring->handle); | ||
2625 | |||
2626 | /* Did it received any packets last time */ | ||
2627 | if ((VXGE_HW_FAIL == status) && | ||
2628 | (VXGE_HW_FAIL == ring->last_status)) { | ||
2629 | |||
2630 | /* schedule vpath reset */ | ||
2631 | if (!test_and_set_bit(i, &vdev->vp_reset)) { | ||
2632 | |||
2633 | /* disable interrupts for this vpath */ | ||
2634 | vxge_vpath_intr_disable(vdev, i); | ||
2635 | |||
2636 | /* stop the queue for this vpath */ | ||
2637 | vxge_stop_tx_queue(&vdev->vpaths[i]. | ||
2638 | fifo); | ||
2639 | continue; | ||
2640 | } | ||
2641 | } | ||
2642 | } | ||
2643 | ring->stats.prev_rx_frms = ring->stats.rx_frms; | ||
2644 | ring->last_status = status; | ||
2645 | } | ||
2646 | |||
2647 | /* Check every 1 milli second */ | ||
2648 | mod_timer(&vdev->vp_lockup_timer, jiffies + HZ / 1000); | ||
2649 | } | ||
2650 | |||
2651 | /** | ||
2652 | * vxge_open | ||
2653 | * @dev: pointer to the device structure. | ||
2654 | * | ||
2655 | * This function is the open entry point of the driver. It mainly calls a | ||
2656 | * function to allocate Rx buffers and inserts them into the buffer | ||
2657 | * descriptors and then enables the Rx part of the NIC. | ||
2658 | * Return value: '0' on success and an appropriate (-)ve integer as | ||
2659 | * defined in errno.h file on failure. | ||
2660 | */ | ||
2661 | int | ||
2662 | vxge_open(struct net_device *dev) | ||
2663 | { | ||
2664 | enum vxge_hw_status status; | ||
2665 | struct vxgedev *vdev; | ||
2666 | struct __vxge_hw_device *hldev; | ||
2667 | int ret = 0; | ||
2668 | int i; | ||
2669 | u64 val64, function_mode; | ||
2670 | vxge_debug_entryexit(VXGE_TRACE, | ||
2671 | "%s: %s:%d", dev->name, __func__, __LINE__); | ||
2672 | |||
2673 | vdev = (struct vxgedev *)netdev_priv(dev); | ||
2674 | hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | ||
2675 | function_mode = vdev->config.device_hw_info.function_mode; | ||
2676 | |||
2677 | /* make sure you have link off by default every time Nic is | ||
2678 | * initialized */ | ||
2679 | netif_carrier_off(dev); | ||
2680 | |||
2681 | /* Check for another device already opn with INTA */ | ||
2682 | if ((function_mode == VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) && | ||
2683 | test_bit(__VXGE_STATE_CARD_UP, &driver_config->inta_dev_open)) { | ||
2684 | ret = -EPERM; | ||
2685 | goto out0; | ||
2686 | } | ||
2687 | |||
2688 | /* Open VPATHs */ | ||
2689 | status = vxge_open_vpaths(vdev); | ||
2690 | if (status != VXGE_HW_OK) { | ||
2691 | vxge_debug_init(VXGE_ERR, | ||
2692 | "%s: fatal: Vpath open failed", vdev->ndev->name); | ||
2693 | ret = -EPERM; | ||
2694 | goto out0; | ||
2695 | } | ||
2696 | |||
2697 | vdev->mtu = dev->mtu; | ||
2698 | |||
2699 | status = vxge_add_isr(vdev); | ||
2700 | if (status != VXGE_HW_OK) { | ||
2701 | vxge_debug_init(VXGE_ERR, | ||
2702 | "%s: fatal: ISR add failed", dev->name); | ||
2703 | ret = -EPERM; | ||
2704 | goto out1; | ||
2705 | } | ||
2706 | |||
2707 | |||
2708 | if (vdev->config.intr_type != MSI_X) { | ||
2709 | netif_napi_add(dev, &vdev->napi, vxge_poll_inta, | ||
2710 | vdev->config.napi_weight); | ||
2711 | napi_enable(&vdev->napi); | ||
2712 | } else { | ||
2713 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
2714 | netif_napi_add(dev, &vdev->vpaths[i].ring.napi, | ||
2715 | vxge_poll_msix, vdev->config.napi_weight); | ||
2716 | napi_enable(&vdev->vpaths[i].ring.napi); | ||
2717 | } | ||
2718 | } | ||
2719 | |||
2720 | /* configure RTH */ | ||
2721 | if (vdev->config.rth_steering) { | ||
2722 | status = vxge_rth_configure(vdev); | ||
2723 | if (status != VXGE_HW_OK) { | ||
2724 | vxge_debug_init(VXGE_ERR, | ||
2725 | "%s: fatal: RTH configuration failed", | ||
2726 | dev->name); | ||
2727 | ret = -EPERM; | ||
2728 | goto out2; | ||
2729 | } | ||
2730 | } | ||
2731 | |||
2732 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
2733 | /* set initial mtu before enabling the device */ | ||
2734 | status = vxge_hw_vpath_mtu_set(vdev->vpaths[i].handle, | ||
2735 | vdev->mtu); | ||
2736 | if (status != VXGE_HW_OK) { | ||
2737 | vxge_debug_init(VXGE_ERR, | ||
2738 | "%s: fatal: can not set new MTU", dev->name); | ||
2739 | ret = -EPERM; | ||
2740 | goto out2; | ||
2741 | } | ||
2742 | } | ||
2743 | |||
2744 | VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_TRACE, VXGE_COMPONENT_LL, vdev); | ||
2745 | vxge_debug_init(vdev->level_trace, | ||
2746 | "%s: MTU is %d", vdev->ndev->name, vdev->mtu); | ||
2747 | VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_ERR, VXGE_COMPONENT_LL, vdev); | ||
2748 | |||
2749 | /* Reprogram the DA table with populated mac addresses */ | ||
2750 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
2751 | vxge_restore_vpath_mac_addr(&vdev->vpaths[i]); | ||
2752 | vxge_restore_vpath_vid_table(&vdev->vpaths[i]); | ||
2753 | } | ||
2754 | |||
2755 | /* Enable vpath to sniff all unicast/multicast traffic that not | ||
2756 | * addressed to them. We allow promiscous mode for PF only | ||
2757 | */ | ||
2758 | |||
2759 | val64 = 0; | ||
2760 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | ||
2761 | val64 |= VXGE_HW_RXMAC_AUTHORIZE_ALL_ADDR_VP(i); | ||
2762 | |||
2763 | vxge_hw_mgmt_reg_write(vdev->devh, | ||
2764 | vxge_hw_mgmt_reg_type_mrpcim, | ||
2765 | 0, | ||
2766 | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | ||
2767 | rxmac_authorize_all_addr), | ||
2768 | val64); | ||
2769 | |||
2770 | vxge_hw_mgmt_reg_write(vdev->devh, | ||
2771 | vxge_hw_mgmt_reg_type_mrpcim, | ||
2772 | 0, | ||
2773 | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | ||
2774 | rxmac_authorize_all_vid), | ||
2775 | val64); | ||
2776 | |||
2777 | vxge_set_multicast(dev); | ||
2778 | |||
2779 | /* Enabling Bcast and mcast for all vpath */ | ||
2780 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
2781 | status = vxge_hw_vpath_bcast_enable(vdev->vpaths[i].handle); | ||
2782 | if (status != VXGE_HW_OK) | ||
2783 | vxge_debug_init(VXGE_ERR, | ||
2784 | "%s : Can not enable bcast for vpath " | ||
2785 | "id %d", dev->name, i); | ||
2786 | if (vdev->config.addr_learn_en) { | ||
2787 | status = | ||
2788 | vxge_hw_vpath_mcast_enable(vdev->vpaths[i].handle); | ||
2789 | if (status != VXGE_HW_OK) | ||
2790 | vxge_debug_init(VXGE_ERR, | ||
2791 | "%s : Can not enable mcast for vpath " | ||
2792 | "id %d", dev->name, i); | ||
2793 | } | ||
2794 | } | ||
2795 | |||
2796 | vxge_hw_device_setpause_data(vdev->devh, 0, | ||
2797 | vdev->config.tx_pause_enable, | ||
2798 | vdev->config.rx_pause_enable); | ||
2799 | |||
2800 | if (vdev->vp_reset_timer.function == NULL) | ||
2801 | vxge_os_timer(vdev->vp_reset_timer, | ||
2802 | vxge_poll_vp_reset, vdev, (HZ/2)); | ||
2803 | |||
2804 | if (vdev->vp_lockup_timer.function == NULL) | ||
2805 | vxge_os_timer(vdev->vp_lockup_timer, | ||
2806 | vxge_poll_vp_lockup, vdev, (HZ/2)); | ||
2807 | |||
2808 | set_bit(__VXGE_STATE_CARD_UP, &vdev->state); | ||
2809 | |||
2810 | smp_wmb(); | ||
2811 | |||
2812 | if (vxge_hw_device_link_state_get(vdev->devh) == VXGE_HW_LINK_UP) { | ||
2813 | netif_carrier_on(vdev->ndev); | ||
2814 | printk(KERN_NOTICE "%s: Link Up\n", vdev->ndev->name); | ||
2815 | vdev->stats.link_up++; | ||
2816 | } | ||
2817 | |||
2818 | vxge_hw_device_intr_enable(vdev->devh); | ||
2819 | |||
2820 | smp_wmb(); | ||
2821 | |||
2822 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
2823 | vxge_hw_vpath_enable(vdev->vpaths[i].handle); | ||
2824 | smp_wmb(); | ||
2825 | vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[i].handle); | ||
2826 | } | ||
2827 | |||
2828 | vxge_start_all_tx_queue(vdev); | ||
2829 | goto out0; | ||
2830 | |||
2831 | out2: | ||
2832 | vxge_rem_isr(vdev); | ||
2833 | |||
2834 | /* Disable napi */ | ||
2835 | if (vdev->config.intr_type != MSI_X) | ||
2836 | napi_disable(&vdev->napi); | ||
2837 | else { | ||
2838 | for (i = 0; i < vdev->no_of_vpath; i++) | ||
2839 | napi_disable(&vdev->vpaths[i].ring.napi); | ||
2840 | } | ||
2841 | |||
2842 | out1: | ||
2843 | vxge_close_vpaths(vdev, 0); | ||
2844 | out0: | ||
2845 | vxge_debug_entryexit(VXGE_TRACE, | ||
2846 | "%s: %s:%d Exiting...", | ||
2847 | dev->name, __func__, __LINE__); | ||
2848 | return ret; | ||
2849 | } | ||
2850 | |||
2851 | /* Loop throught the mac address list and delete all the entries */ | ||
2852 | void vxge_free_mac_add_list(struct vxge_vpath *vpath) | ||
2853 | { | ||
2854 | |||
2855 | struct list_head *entry, *next; | ||
2856 | if (list_empty(&vpath->mac_addr_list)) | ||
2857 | return; | ||
2858 | |||
2859 | list_for_each_safe(entry, next, &vpath->mac_addr_list) { | ||
2860 | list_del(entry); | ||
2861 | kfree((struct vxge_mac_addrs *)entry); | ||
2862 | } | ||
2863 | } | ||
2864 | |||
2865 | static void vxge_napi_del_all(struct vxgedev *vdev) | ||
2866 | { | ||
2867 | int i; | ||
2868 | if (vdev->config.intr_type != MSI_X) | ||
2869 | netif_napi_del(&vdev->napi); | ||
2870 | else { | ||
2871 | for (i = 0; i < vdev->no_of_vpath; i++) | ||
2872 | netif_napi_del(&vdev->vpaths[i].ring.napi); | ||
2873 | } | ||
2874 | return; | ||
2875 | } | ||
2876 | |||
2877 | int do_vxge_close(struct net_device *dev, int do_io) | ||
2878 | { | ||
2879 | enum vxge_hw_status status; | ||
2880 | struct vxgedev *vdev; | ||
2881 | struct __vxge_hw_device *hldev; | ||
2882 | int i; | ||
2883 | u64 val64, vpath_vector; | ||
2884 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | ||
2885 | dev->name, __func__, __LINE__); | ||
2886 | |||
2887 | vdev = (struct vxgedev *)netdev_priv(dev); | ||
2888 | hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | ||
2889 | |||
2890 | /* If vxge_handle_crit_err task is executing, | ||
2891 | * wait till it completes. */ | ||
2892 | while (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | ||
2893 | msleep(50); | ||
2894 | |||
2895 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | ||
2896 | if (do_io) { | ||
2897 | /* Put the vpath back in normal mode */ | ||
2898 | vpath_vector = vxge_mBIT(vdev->vpaths[0].device_id); | ||
2899 | status = vxge_hw_mgmt_reg_read(vdev->devh, | ||
2900 | vxge_hw_mgmt_reg_type_mrpcim, | ||
2901 | 0, | ||
2902 | (ulong)offsetof( | ||
2903 | struct vxge_hw_mrpcim_reg, | ||
2904 | rts_mgr_cbasin_cfg), | ||
2905 | &val64); | ||
2906 | |||
2907 | if (status == VXGE_HW_OK) { | ||
2908 | val64 &= ~vpath_vector; | ||
2909 | status = vxge_hw_mgmt_reg_write(vdev->devh, | ||
2910 | vxge_hw_mgmt_reg_type_mrpcim, | ||
2911 | 0, | ||
2912 | (ulong)offsetof( | ||
2913 | struct vxge_hw_mrpcim_reg, | ||
2914 | rts_mgr_cbasin_cfg), | ||
2915 | val64); | ||
2916 | } | ||
2917 | |||
2918 | /* Remove the function 0 from promiscous mode */ | ||
2919 | vxge_hw_mgmt_reg_write(vdev->devh, | ||
2920 | vxge_hw_mgmt_reg_type_mrpcim, | ||
2921 | 0, | ||
2922 | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | ||
2923 | rxmac_authorize_all_addr), | ||
2924 | 0); | ||
2925 | |||
2926 | vxge_hw_mgmt_reg_write(vdev->devh, | ||
2927 | vxge_hw_mgmt_reg_type_mrpcim, | ||
2928 | 0, | ||
2929 | (ulong)offsetof(struct vxge_hw_mrpcim_reg, | ||
2930 | rxmac_authorize_all_vid), | ||
2931 | 0); | ||
2932 | |||
2933 | smp_wmb(); | ||
2934 | } | ||
2935 | del_timer_sync(&vdev->vp_lockup_timer); | ||
2936 | |||
2937 | del_timer_sync(&vdev->vp_reset_timer); | ||
2938 | |||
2939 | /* Disable napi */ | ||
2940 | if (vdev->config.intr_type != MSI_X) | ||
2941 | napi_disable(&vdev->napi); | ||
2942 | else { | ||
2943 | for (i = 0; i < vdev->no_of_vpath; i++) | ||
2944 | napi_disable(&vdev->vpaths[i].ring.napi); | ||
2945 | } | ||
2946 | |||
2947 | netif_carrier_off(vdev->ndev); | ||
2948 | printk(KERN_NOTICE "%s: Link Down\n", vdev->ndev->name); | ||
2949 | vxge_stop_all_tx_queue(vdev); | ||
2950 | |||
2951 | /* Note that at this point xmit() is stopped by upper layer */ | ||
2952 | if (do_io) | ||
2953 | vxge_hw_device_intr_disable(vdev->devh); | ||
2954 | |||
2955 | mdelay(1000); | ||
2956 | |||
2957 | vxge_rem_isr(vdev); | ||
2958 | |||
2959 | vxge_napi_del_all(vdev); | ||
2960 | |||
2961 | if (do_io) | ||
2962 | vxge_reset_all_vpaths(vdev); | ||
2963 | |||
2964 | vxge_close_vpaths(vdev, 0); | ||
2965 | |||
2966 | vxge_debug_entryexit(VXGE_TRACE, | ||
2967 | "%s: %s:%d Exiting...", dev->name, __func__, __LINE__); | ||
2968 | |||
2969 | clear_bit(__VXGE_STATE_CARD_UP, &driver_config->inta_dev_open); | ||
2970 | clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state); | ||
2971 | |||
2972 | return 0; | ||
2973 | } | ||
2974 | |||
2975 | /** | ||
2976 | * vxge_close | ||
2977 | * @dev: device pointer. | ||
2978 | * | ||
2979 | * This is the stop entry point of the driver. It needs to undo exactly | ||
2980 | * whatever was done by the open entry point, thus it's usually referred to | ||
2981 | * as the close function.Among other things this function mainly stops the | ||
2982 | * Rx side of the NIC and frees all the Rx buffers in the Rx rings. | ||
2983 | * Return value: '0' on success and an appropriate (-)ve integer as | ||
2984 | * defined in errno.h file on failure. | ||
2985 | */ | ||
2986 | int | ||
2987 | vxge_close(struct net_device *dev) | ||
2988 | { | ||
2989 | do_vxge_close(dev, 1); | ||
2990 | return 0; | ||
2991 | } | ||
2992 | |||
2993 | /** | ||
2994 | * vxge_change_mtu | ||
2995 | * @dev: net device pointer. | ||
2996 | * @new_mtu :the new MTU size for the device. | ||
2997 | * | ||
2998 | * A driver entry point to change MTU size for the device. Before changing | ||
2999 | * the MTU the device must be stopped. | ||
3000 | */ | ||
3001 | static int vxge_change_mtu(struct net_device *dev, int new_mtu) | ||
3002 | { | ||
3003 | struct vxgedev *vdev = netdev_priv(dev); | ||
3004 | |||
3005 | vxge_debug_entryexit(vdev->level_trace, | ||
3006 | "%s:%d", __func__, __LINE__); | ||
3007 | if ((new_mtu < VXGE_HW_MIN_MTU) || (new_mtu > VXGE_HW_MAX_MTU)) { | ||
3008 | vxge_debug_init(vdev->level_err, | ||
3009 | "%s: mtu size is invalid", dev->name); | ||
3010 | return -EPERM; | ||
3011 | } | ||
3012 | |||
3013 | /* check if device is down already */ | ||
3014 | if (unlikely(!is_vxge_card_up(vdev))) { | ||
3015 | /* just store new value, will use later on open() */ | ||
3016 | dev->mtu = new_mtu; | ||
3017 | vxge_debug_init(vdev->level_err, | ||
3018 | "%s", "device is down on MTU change"); | ||
3019 | return 0; | ||
3020 | } | ||
3021 | |||
3022 | vxge_debug_init(vdev->level_trace, | ||
3023 | "trying to apply new MTU %d", new_mtu); | ||
3024 | |||
3025 | if (vxge_close(dev)) | ||
3026 | return -EIO; | ||
3027 | |||
3028 | dev->mtu = new_mtu; | ||
3029 | vdev->mtu = new_mtu; | ||
3030 | |||
3031 | if (vxge_open(dev)) | ||
3032 | return -EIO; | ||
3033 | |||
3034 | vxge_debug_init(vdev->level_trace, | ||
3035 | "%s: MTU changed to %d", vdev->ndev->name, new_mtu); | ||
3036 | |||
3037 | vxge_debug_entryexit(vdev->level_trace, | ||
3038 | "%s:%d Exiting...", __func__, __LINE__); | ||
3039 | |||
3040 | return 0; | ||
3041 | } | ||
3042 | |||
3043 | /** | ||
3044 | * vxge_get_stats | ||
3045 | * @dev: pointer to the device structure | ||
3046 | * | ||
3047 | * Updates the device statistics structure. This function updates the device | ||
3048 | * statistics structure in the net_device structure and returns a pointer | ||
3049 | * to the same. | ||
3050 | */ | ||
3051 | static struct net_device_stats * | ||
3052 | vxge_get_stats(struct net_device *dev) | ||
3053 | { | ||
3054 | struct vxgedev *vdev; | ||
3055 | struct net_device_stats *net_stats; | ||
3056 | int k; | ||
3057 | |||
3058 | vdev = netdev_priv(dev); | ||
3059 | |||
3060 | net_stats = &vdev->stats.net_stats; | ||
3061 | |||
3062 | memset(net_stats, 0, sizeof(struct net_device_stats)); | ||
3063 | |||
3064 | for (k = 0; k < vdev->no_of_vpath; k++) { | ||
3065 | net_stats->rx_packets += vdev->vpaths[k].ring.stats.rx_frms; | ||
3066 | net_stats->rx_bytes += vdev->vpaths[k].ring.stats.rx_bytes; | ||
3067 | net_stats->rx_errors += vdev->vpaths[k].ring.stats.rx_errors; | ||
3068 | net_stats->multicast += vdev->vpaths[k].ring.stats.rx_mcast; | ||
3069 | net_stats->rx_dropped += | ||
3070 | vdev->vpaths[k].ring.stats.rx_dropped; | ||
3071 | |||
3072 | net_stats->tx_packets += vdev->vpaths[k].fifo.stats.tx_frms; | ||
3073 | net_stats->tx_bytes += vdev->vpaths[k].fifo.stats.tx_bytes; | ||
3074 | net_stats->tx_errors += vdev->vpaths[k].fifo.stats.tx_errors; | ||
3075 | } | ||
3076 | |||
3077 | return net_stats; | ||
3078 | } | ||
3079 | |||
3080 | /** | ||
3081 | * vxge_ioctl | ||
3082 | * @dev: Device pointer. | ||
3083 | * @ifr: An IOCTL specific structure, that can contain a pointer to | ||
3084 | * a proprietary structure used to pass information to the driver. | ||
3085 | * @cmd: This is used to distinguish between the different commands that | ||
3086 | * can be passed to the IOCTL functions. | ||
3087 | * | ||
3088 | * Entry point for the Ioctl. | ||
3089 | */ | ||
3090 | static int vxge_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | ||
3091 | { | ||
3092 | return -EOPNOTSUPP; | ||
3093 | } | ||
3094 | |||
3095 | /** | ||
3096 | * vxge_tx_watchdog | ||
3097 | * @dev: pointer to net device structure | ||
3098 | * | ||
3099 | * Watchdog for transmit side. | ||
3100 | * This function is triggered if the Tx Queue is stopped | ||
3101 | * for a pre-defined amount of time when the Interface is still up. | ||
3102 | */ | ||
3103 | static void | ||
3104 | vxge_tx_watchdog(struct net_device *dev) | ||
3105 | { | ||
3106 | struct vxgedev *vdev; | ||
3107 | |||
3108 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | ||
3109 | |||
3110 | vdev = (struct vxgedev *)netdev_priv(dev); | ||
3111 | |||
3112 | vdev->cric_err_event = VXGE_HW_EVENT_RESET_START; | ||
3113 | |||
3114 | vxge_reset(vdev); | ||
3115 | vxge_debug_entryexit(VXGE_TRACE, | ||
3116 | "%s:%d Exiting...", __func__, __LINE__); | ||
3117 | } | ||
3118 | |||
3119 | /** | ||
3120 | * vxge_vlan_rx_register | ||
3121 | * @dev: net device pointer. | ||
3122 | * @grp: vlan group | ||
3123 | * | ||
3124 | * Vlan group registration | ||
3125 | */ | ||
3126 | static void | ||
3127 | vxge_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) | ||
3128 | { | ||
3129 | struct vxgedev *vdev; | ||
3130 | struct vxge_vpath *vpath; | ||
3131 | int vp; | ||
3132 | u64 vid; | ||
3133 | enum vxge_hw_status status; | ||
3134 | int i; | ||
3135 | |||
3136 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | ||
3137 | |||
3138 | vdev = (struct vxgedev *)netdev_priv(dev); | ||
3139 | |||
3140 | vpath = &vdev->vpaths[0]; | ||
3141 | if ((NULL == grp) && (vpath->is_open)) { | ||
3142 | /* Get the first vlan */ | ||
3143 | status = vxge_hw_vpath_vid_get(vpath->handle, &vid); | ||
3144 | |||
3145 | while (status == VXGE_HW_OK) { | ||
3146 | |||
3147 | /* Delete this vlan from the vid table */ | ||
3148 | for (vp = 0; vp < vdev->no_of_vpath; vp++) { | ||
3149 | vpath = &vdev->vpaths[vp]; | ||
3150 | if (!vpath->is_open) | ||
3151 | continue; | ||
3152 | |||
3153 | vxge_hw_vpath_vid_delete(vpath->handle, vid); | ||
3154 | } | ||
3155 | |||
3156 | /* Get the next vlan to be deleted */ | ||
3157 | vpath = &vdev->vpaths[0]; | ||
3158 | status = vxge_hw_vpath_vid_get(vpath->handle, &vid); | ||
3159 | } | ||
3160 | } | ||
3161 | |||
3162 | vdev->vlgrp = grp; | ||
3163 | |||
3164 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
3165 | if (vdev->vpaths[i].is_configured) | ||
3166 | vdev->vpaths[i].ring.vlgrp = grp; | ||
3167 | } | ||
3168 | |||
3169 | vxge_debug_entryexit(VXGE_TRACE, | ||
3170 | "%s:%d Exiting...", __func__, __LINE__); | ||
3171 | } | ||
3172 | |||
3173 | /** | ||
3174 | * vxge_vlan_rx_add_vid | ||
3175 | * @dev: net device pointer. | ||
3176 | * @vid: vid | ||
3177 | * | ||
3178 | * Add the vlan id to the devices vlan id table | ||
3179 | */ | ||
3180 | static void | ||
3181 | vxge_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) | ||
3182 | { | ||
3183 | struct vxgedev *vdev; | ||
3184 | struct vxge_vpath *vpath; | ||
3185 | int vp_id; | ||
3186 | |||
3187 | vdev = (struct vxgedev *)netdev_priv(dev); | ||
3188 | |||
3189 | /* Add these vlan to the vid table */ | ||
3190 | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | ||
3191 | vpath = &vdev->vpaths[vp_id]; | ||
3192 | if (!vpath->is_open) | ||
3193 | continue; | ||
3194 | vxge_hw_vpath_vid_add(vpath->handle, vid); | ||
3195 | } | ||
3196 | } | ||
3197 | |||
3198 | /** | ||
3199 | * vxge_vlan_rx_add_vid | ||
3200 | * @dev: net device pointer. | ||
3201 | * @vid: vid | ||
3202 | * | ||
3203 | * Remove the vlan id from the device's vlan id table | ||
3204 | */ | ||
3205 | static void | ||
3206 | vxge_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) | ||
3207 | { | ||
3208 | struct vxgedev *vdev; | ||
3209 | struct vxge_vpath *vpath; | ||
3210 | int vp_id; | ||
3211 | |||
3212 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | ||
3213 | |||
3214 | vdev = (struct vxgedev *)netdev_priv(dev); | ||
3215 | |||
3216 | vlan_group_set_device(vdev->vlgrp, vid, NULL); | ||
3217 | |||
3218 | /* Delete this vlan from the vid table */ | ||
3219 | for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | ||
3220 | vpath = &vdev->vpaths[vp_id]; | ||
3221 | if (!vpath->is_open) | ||
3222 | continue; | ||
3223 | vxge_hw_vpath_vid_delete(vpath->handle, vid); | ||
3224 | } | ||
3225 | vxge_debug_entryexit(VXGE_TRACE, | ||
3226 | "%s:%d Exiting...", __func__, __LINE__); | ||
3227 | } | ||
3228 | |||
3229 | static const struct net_device_ops vxge_netdev_ops = { | ||
3230 | .ndo_open = vxge_open, | ||
3231 | .ndo_stop = vxge_close, | ||
3232 | .ndo_get_stats = vxge_get_stats, | ||
3233 | .ndo_start_xmit = vxge_xmit, | ||
3234 | .ndo_validate_addr = eth_validate_addr, | ||
3235 | .ndo_set_multicast_list = vxge_set_multicast, | ||
3236 | |||
3237 | .ndo_do_ioctl = vxge_ioctl, | ||
3238 | |||
3239 | .ndo_set_mac_address = vxge_set_mac_addr, | ||
3240 | .ndo_change_mtu = vxge_change_mtu, | ||
3241 | .ndo_vlan_rx_register = vxge_vlan_rx_register, | ||
3242 | .ndo_vlan_rx_kill_vid = vxge_vlan_rx_kill_vid, | ||
3243 | .ndo_vlan_rx_add_vid = vxge_vlan_rx_add_vid, | ||
3244 | |||
3245 | .ndo_tx_timeout = vxge_tx_watchdog, | ||
3246 | #ifdef CONFIG_NET_POLL_CONTROLLER | ||
3247 | .ndo_poll_controller = vxge_netpoll, | ||
3248 | #endif | ||
3249 | }; | ||
3250 | |||
3251 | int __devinit vxge_device_register(struct __vxge_hw_device *hldev, | ||
3252 | struct vxge_config *config, | ||
3253 | int high_dma, int no_of_vpath, | ||
3254 | struct vxgedev **vdev_out) | ||
3255 | { | ||
3256 | struct net_device *ndev; | ||
3257 | enum vxge_hw_status status = VXGE_HW_OK; | ||
3258 | struct vxgedev *vdev; | ||
3259 | int i, ret = 0, no_of_queue = 1; | ||
3260 | u64 stat; | ||
3261 | |||
3262 | *vdev_out = NULL; | ||
3263 | if (config->tx_steering_type == TX_MULTIQ_STEERING) | ||
3264 | no_of_queue = no_of_vpath; | ||
3265 | |||
3266 | ndev = alloc_etherdev_mq(sizeof(struct vxgedev), | ||
3267 | no_of_queue); | ||
3268 | if (ndev == NULL) { | ||
3269 | vxge_debug_init( | ||
3270 | vxge_hw_device_trace_level_get(hldev), | ||
3271 | "%s : device allocation failed", __func__); | ||
3272 | ret = -ENODEV; | ||
3273 | goto _out0; | ||
3274 | } | ||
3275 | |||
3276 | vxge_debug_entryexit( | ||
3277 | vxge_hw_device_trace_level_get(hldev), | ||
3278 | "%s: %s:%d Entering...", | ||
3279 | ndev->name, __func__, __LINE__); | ||
3280 | |||
3281 | vdev = netdev_priv(ndev); | ||
3282 | memset(vdev, 0, sizeof(struct vxgedev)); | ||
3283 | |||
3284 | vdev->ndev = ndev; | ||
3285 | vdev->devh = hldev; | ||
3286 | vdev->pdev = hldev->pdev; | ||
3287 | memcpy(&vdev->config, config, sizeof(struct vxge_config)); | ||
3288 | vdev->rx_csum = 1; /* Enable Rx CSUM by default. */ | ||
3289 | |||
3290 | SET_NETDEV_DEV(ndev, &vdev->pdev->dev); | ||
3291 | |||
3292 | ndev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | | ||
3293 | NETIF_F_HW_VLAN_FILTER; | ||
3294 | /* Driver entry points */ | ||
3295 | ndev->irq = vdev->pdev->irq; | ||
3296 | ndev->base_addr = (unsigned long) hldev->bar0; | ||
3297 | |||
3298 | ndev->netdev_ops = &vxge_netdev_ops; | ||
3299 | |||
3300 | ndev->watchdog_timeo = VXGE_LL_WATCH_DOG_TIMEOUT; | ||
3301 | |||
3302 | initialize_ethtool_ops(ndev); | ||
3303 | |||
3304 | /* Allocate memory for vpath */ | ||
3305 | vdev->vpaths = kzalloc((sizeof(struct vxge_vpath)) * | ||
3306 | no_of_vpath, GFP_KERNEL); | ||
3307 | if (!vdev->vpaths) { | ||
3308 | vxge_debug_init(VXGE_ERR, | ||
3309 | "%s: vpath memory allocation failed", | ||
3310 | vdev->ndev->name); | ||
3311 | ret = -ENODEV; | ||
3312 | goto _out1; | ||
3313 | } | ||
3314 | |||
3315 | ndev->features |= NETIF_F_SG; | ||
3316 | |||
3317 | ndev->features |= NETIF_F_HW_CSUM; | ||
3318 | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | ||
3319 | "%s : checksuming enabled", __func__); | ||
3320 | |||
3321 | if (high_dma) { | ||
3322 | ndev->features |= NETIF_F_HIGHDMA; | ||
3323 | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | ||
3324 | "%s : using High DMA", __func__); | ||
3325 | } | ||
3326 | |||
3327 | ndev->features |= NETIF_F_TSO | NETIF_F_TSO6; | ||
3328 | |||
3329 | if (vdev->config.gro_enable) | ||
3330 | ndev->features |= NETIF_F_GRO; | ||
3331 | |||
3332 | if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) | ||
3333 | ndev->real_num_tx_queues = no_of_vpath; | ||
3334 | |||
3335 | #ifdef NETIF_F_LLTX | ||
3336 | ndev->features |= NETIF_F_LLTX; | ||
3337 | #endif | ||
3338 | |||
3339 | for (i = 0; i < no_of_vpath; i++) | ||
3340 | spin_lock_init(&vdev->vpaths[i].fifo.tx_lock); | ||
3341 | |||
3342 | if (register_netdev(ndev)) { | ||
3343 | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | ||
3344 | "%s: %s : device registration failed!", | ||
3345 | ndev->name, __func__); | ||
3346 | ret = -ENODEV; | ||
3347 | goto _out2; | ||
3348 | } | ||
3349 | |||
3350 | /* Set the factory defined MAC address initially */ | ||
3351 | ndev->addr_len = ETH_ALEN; | ||
3352 | |||
3353 | /* Make Link state as off at this point, when the Link change | ||
3354 | * interrupt comes the state will be automatically changed to | ||
3355 | * the right state. | ||
3356 | */ | ||
3357 | netif_carrier_off(ndev); | ||
3358 | |||
3359 | vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | ||
3360 | "%s: Ethernet device registered", | ||
3361 | ndev->name); | ||
3362 | |||
3363 | *vdev_out = vdev; | ||
3364 | |||
3365 | /* Resetting the Device stats */ | ||
3366 | status = vxge_hw_mrpcim_stats_access( | ||
3367 | hldev, | ||
3368 | VXGE_HW_STATS_OP_CLEAR_ALL_STATS, | ||
3369 | 0, | ||
3370 | 0, | ||
3371 | &stat); | ||
3372 | |||
3373 | if (status == VXGE_HW_ERR_PRIVILAGED_OPEARATION) | ||
3374 | vxge_debug_init( | ||
3375 | vxge_hw_device_trace_level_get(hldev), | ||
3376 | "%s: device stats clear returns" | ||
3377 | "VXGE_HW_ERR_PRIVILAGED_OPEARATION", ndev->name); | ||
3378 | |||
3379 | vxge_debug_entryexit(vxge_hw_device_trace_level_get(hldev), | ||
3380 | "%s: %s:%d Exiting...", | ||
3381 | ndev->name, __func__, __LINE__); | ||
3382 | |||
3383 | return ret; | ||
3384 | _out2: | ||
3385 | kfree(vdev->vpaths); | ||
3386 | _out1: | ||
3387 | free_netdev(ndev); | ||
3388 | _out0: | ||
3389 | return ret; | ||
3390 | } | ||
3391 | |||
3392 | /* | ||
3393 | * vxge_device_unregister | ||
3394 | * | ||
3395 | * This function will unregister and free network device | ||
3396 | */ | ||
3397 | void | ||
3398 | vxge_device_unregister(struct __vxge_hw_device *hldev) | ||
3399 | { | ||
3400 | struct vxgedev *vdev; | ||
3401 | struct net_device *dev; | ||
3402 | char buf[IFNAMSIZ]; | ||
3403 | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | ||
3404 | (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | ||
3405 | u32 level_trace; | ||
3406 | #endif | ||
3407 | |||
3408 | dev = hldev->ndev; | ||
3409 | vdev = netdev_priv(dev); | ||
3410 | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | ||
3411 | (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | ||
3412 | level_trace = vdev->level_trace; | ||
3413 | #endif | ||
3414 | vxge_debug_entryexit(level_trace, | ||
3415 | "%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | ||
3416 | |||
3417 | memcpy(buf, vdev->ndev->name, IFNAMSIZ); | ||
3418 | |||
3419 | /* in 2.6 will call stop() if device is up */ | ||
3420 | unregister_netdev(dev); | ||
3421 | |||
3422 | flush_scheduled_work(); | ||
3423 | |||
3424 | vxge_debug_init(level_trace, "%s: ethernet device unregistered", buf); | ||
3425 | vxge_debug_entryexit(level_trace, | ||
3426 | "%s: %s:%d Exiting...", buf, __func__, __LINE__); | ||
3427 | } | ||
3428 | |||
3429 | /* | ||
3430 | * vxge_callback_crit_err | ||
3431 | * | ||
3432 | * This function is called by the alarm handler in interrupt context. | ||
3433 | * Driver must analyze it based on the event type. | ||
3434 | */ | ||
3435 | static void | ||
3436 | vxge_callback_crit_err(struct __vxge_hw_device *hldev, | ||
3437 | enum vxge_hw_event type, u64 vp_id) | ||
3438 | { | ||
3439 | struct net_device *dev = hldev->ndev; | ||
3440 | struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev); | ||
3441 | int vpath_idx; | ||
3442 | |||
3443 | vxge_debug_entryexit(vdev->level_trace, | ||
3444 | "%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | ||
3445 | |||
3446 | /* Note: This event type should be used for device wide | ||
3447 | * indications only - Serious errors, Slot freeze and critical errors | ||
3448 | */ | ||
3449 | vdev->cric_err_event = type; | ||
3450 | |||
3451 | for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) | ||
3452 | if (vdev->vpaths[vpath_idx].device_id == vp_id) | ||
3453 | break; | ||
3454 | |||
3455 | if (!test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) { | ||
3456 | if (type == VXGE_HW_EVENT_SLOT_FREEZE) { | ||
3457 | vxge_debug_init(VXGE_ERR, | ||
3458 | "%s: Slot is frozen", vdev->ndev->name); | ||
3459 | } else if (type == VXGE_HW_EVENT_SERR) { | ||
3460 | vxge_debug_init(VXGE_ERR, | ||
3461 | "%s: Encountered Serious Error", | ||
3462 | vdev->ndev->name); | ||
3463 | } else if (type == VXGE_HW_EVENT_CRITICAL_ERR) | ||
3464 | vxge_debug_init(VXGE_ERR, | ||
3465 | "%s: Encountered Critical Error", | ||
3466 | vdev->ndev->name); | ||
3467 | } | ||
3468 | |||
3469 | if ((type == VXGE_HW_EVENT_SERR) || | ||
3470 | (type == VXGE_HW_EVENT_SLOT_FREEZE)) { | ||
3471 | if (unlikely(vdev->exec_mode)) | ||
3472 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | ||
3473 | } else if (type == VXGE_HW_EVENT_CRITICAL_ERR) { | ||
3474 | vxge_hw_device_mask_all(hldev); | ||
3475 | if (unlikely(vdev->exec_mode)) | ||
3476 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | ||
3477 | } else if ((type == VXGE_HW_EVENT_FIFO_ERR) || | ||
3478 | (type == VXGE_HW_EVENT_VPATH_ERR)) { | ||
3479 | |||
3480 | if (unlikely(vdev->exec_mode)) | ||
3481 | clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | ||
3482 | else { | ||
3483 | /* check if this vpath is already set for reset */ | ||
3484 | if (!test_and_set_bit(vpath_idx, &vdev->vp_reset)) { | ||
3485 | |||
3486 | /* disable interrupts for this vpath */ | ||
3487 | vxge_vpath_intr_disable(vdev, vpath_idx); | ||
3488 | |||
3489 | /* stop the queue for this vpath */ | ||
3490 | vxge_stop_tx_queue(&vdev->vpaths[vpath_idx]. | ||
3491 | fifo); | ||
3492 | } | ||
3493 | } | ||
3494 | } | ||
3495 | |||
3496 | vxge_debug_entryexit(vdev->level_trace, | ||
3497 | "%s: %s:%d Exiting...", | ||
3498 | vdev->ndev->name, __func__, __LINE__); | ||
3499 | } | ||
3500 | |||
3501 | static void verify_bandwidth(void) | ||
3502 | { | ||
3503 | int i, band_width, total = 0, equal_priority = 0; | ||
3504 | |||
3505 | /* 1. If user enters 0 for some fifo, give equal priority to all */ | ||
3506 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | ||
3507 | if (bw_percentage[i] == 0) { | ||
3508 | equal_priority = 1; | ||
3509 | break; | ||
3510 | } | ||
3511 | } | ||
3512 | |||
3513 | if (!equal_priority) { | ||
3514 | /* 2. If sum exceeds 100, give equal priority to all */ | ||
3515 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | ||
3516 | if (bw_percentage[i] == 0xFF) | ||
3517 | break; | ||
3518 | |||
3519 | total += bw_percentage[i]; | ||
3520 | if (total > VXGE_HW_VPATH_BANDWIDTH_MAX) { | ||
3521 | equal_priority = 1; | ||
3522 | break; | ||
3523 | } | ||
3524 | } | ||
3525 | } | ||
3526 | |||
3527 | if (!equal_priority) { | ||
3528 | /* Is all the bandwidth consumed? */ | ||
3529 | if (total < VXGE_HW_VPATH_BANDWIDTH_MAX) { | ||
3530 | if (i < VXGE_HW_MAX_VIRTUAL_PATHS) { | ||
3531 | /* Split rest of bw equally among next VPs*/ | ||
3532 | band_width = | ||
3533 | (VXGE_HW_VPATH_BANDWIDTH_MAX - total) / | ||
3534 | (VXGE_HW_MAX_VIRTUAL_PATHS - i); | ||
3535 | if (band_width < 2) /* min of 2% */ | ||
3536 | equal_priority = 1; | ||
3537 | else { | ||
3538 | for (; i < VXGE_HW_MAX_VIRTUAL_PATHS; | ||
3539 | i++) | ||
3540 | bw_percentage[i] = | ||
3541 | band_width; | ||
3542 | } | ||
3543 | } | ||
3544 | } else if (i < VXGE_HW_MAX_VIRTUAL_PATHS) | ||
3545 | equal_priority = 1; | ||
3546 | } | ||
3547 | |||
3548 | if (equal_priority) { | ||
3549 | vxge_debug_init(VXGE_ERR, | ||
3550 | "%s: Assigning equal bandwidth to all the vpaths", | ||
3551 | VXGE_DRIVER_NAME); | ||
3552 | bw_percentage[0] = VXGE_HW_VPATH_BANDWIDTH_MAX / | ||
3553 | VXGE_HW_MAX_VIRTUAL_PATHS; | ||
3554 | for (i = 1; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | ||
3555 | bw_percentage[i] = bw_percentage[0]; | ||
3556 | } | ||
3557 | |||
3558 | return; | ||
3559 | } | ||
3560 | |||
3561 | /* | ||
3562 | * Vpath configuration | ||
3563 | */ | ||
3564 | static int __devinit vxge_config_vpaths( | ||
3565 | struct vxge_hw_device_config *device_config, | ||
3566 | u64 vpath_mask, struct vxge_config *config_param) | ||
3567 | { | ||
3568 | int i, no_of_vpaths = 0, default_no_vpath = 0, temp; | ||
3569 | u32 txdl_size, txdl_per_memblock; | ||
3570 | |||
3571 | temp = driver_config->vpath_per_dev; | ||
3572 | if ((driver_config->vpath_per_dev == VXGE_USE_DEFAULT) && | ||
3573 | (max_config_dev == VXGE_MAX_CONFIG_DEV)) { | ||
3574 | /* No more CPU. Return vpath number as zero.*/ | ||
3575 | if (driver_config->g_no_cpus == -1) | ||
3576 | return 0; | ||
3577 | |||
3578 | if (!driver_config->g_no_cpus) | ||
3579 | driver_config->g_no_cpus = num_online_cpus(); | ||
3580 | |||
3581 | driver_config->vpath_per_dev = driver_config->g_no_cpus >> 1; | ||
3582 | if (!driver_config->vpath_per_dev) | ||
3583 | driver_config->vpath_per_dev = 1; | ||
3584 | |||
3585 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | ||
3586 | if (!vxge_bVALn(vpath_mask, i, 1)) | ||
3587 | continue; | ||
3588 | else | ||
3589 | default_no_vpath++; | ||
3590 | if (default_no_vpath < driver_config->vpath_per_dev) | ||
3591 | driver_config->vpath_per_dev = default_no_vpath; | ||
3592 | |||
3593 | driver_config->g_no_cpus = driver_config->g_no_cpus - | ||
3594 | (driver_config->vpath_per_dev * 2); | ||
3595 | if (driver_config->g_no_cpus <= 0) | ||
3596 | driver_config->g_no_cpus = -1; | ||
3597 | } | ||
3598 | |||
3599 | if (driver_config->vpath_per_dev == 1) { | ||
3600 | vxge_debug_ll_config(VXGE_TRACE, | ||
3601 | "%s: Disable tx and rx steering, " | ||
3602 | "as single vpath is configured", VXGE_DRIVER_NAME); | ||
3603 | config_param->rth_steering = NO_STEERING; | ||
3604 | config_param->tx_steering_type = NO_STEERING; | ||
3605 | device_config->rth_en = 0; | ||
3606 | } | ||
3607 | |||
3608 | /* configure bandwidth */ | ||
3609 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | ||
3610 | device_config->vp_config[i].min_bandwidth = bw_percentage[i]; | ||
3611 | |||
3612 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | ||
3613 | device_config->vp_config[i].vp_id = i; | ||
3614 | device_config->vp_config[i].mtu = VXGE_HW_DEFAULT_MTU; | ||
3615 | if (no_of_vpaths < driver_config->vpath_per_dev) { | ||
3616 | if (!vxge_bVALn(vpath_mask, i, 1)) { | ||
3617 | vxge_debug_ll_config(VXGE_TRACE, | ||
3618 | "%s: vpath: %d is not available", | ||
3619 | VXGE_DRIVER_NAME, i); | ||
3620 | continue; | ||
3621 | } else { | ||
3622 | vxge_debug_ll_config(VXGE_TRACE, | ||
3623 | "%s: vpath: %d available", | ||
3624 | VXGE_DRIVER_NAME, i); | ||
3625 | no_of_vpaths++; | ||
3626 | } | ||
3627 | } else { | ||
3628 | vxge_debug_ll_config(VXGE_TRACE, | ||
3629 | "%s: vpath: %d is not configured, " | ||
3630 | "max_config_vpath exceeded", | ||
3631 | VXGE_DRIVER_NAME, i); | ||
3632 | break; | ||
3633 | } | ||
3634 | |||
3635 | /* Configure Tx fifo's */ | ||
3636 | device_config->vp_config[i].fifo.enable = | ||
3637 | VXGE_HW_FIFO_ENABLE; | ||
3638 | device_config->vp_config[i].fifo.max_frags = | ||
3639 | MAX_SKB_FRAGS; | ||
3640 | device_config->vp_config[i].fifo.memblock_size = | ||
3641 | VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE; | ||
3642 | |||
3643 | txdl_size = MAX_SKB_FRAGS * sizeof(struct vxge_hw_fifo_txd); | ||
3644 | txdl_per_memblock = VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE / txdl_size; | ||
3645 | |||
3646 | device_config->vp_config[i].fifo.fifo_blocks = | ||
3647 | ((VXGE_DEF_FIFO_LENGTH - 1) / txdl_per_memblock) + 1; | ||
3648 | |||
3649 | device_config->vp_config[i].fifo.intr = | ||
3650 | VXGE_HW_FIFO_QUEUE_INTR_DISABLE; | ||
3651 | |||
3652 | /* Configure tti properties */ | ||
3653 | device_config->vp_config[i].tti.intr_enable = | ||
3654 | VXGE_HW_TIM_INTR_ENABLE; | ||
3655 | |||
3656 | device_config->vp_config[i].tti.btimer_val = | ||
3657 | (VXGE_TTI_BTIMER_VAL * 1000) / 272; | ||
3658 | |||
3659 | device_config->vp_config[i].tti.timer_ac_en = | ||
3660 | VXGE_HW_TIM_TIMER_AC_ENABLE; | ||
3661 | |||
3662 | /* For msi-x with napi (each vector | ||
3663 | has a handler of its own) - | ||
3664 | Set CI to OFF for all vpaths */ | ||
3665 | device_config->vp_config[i].tti.timer_ci_en = | ||
3666 | VXGE_HW_TIM_TIMER_CI_DISABLE; | ||
3667 | |||
3668 | device_config->vp_config[i].tti.timer_ri_en = | ||
3669 | VXGE_HW_TIM_TIMER_RI_DISABLE; | ||
3670 | |||
3671 | device_config->vp_config[i].tti.util_sel = | ||
3672 | VXGE_HW_TIM_UTIL_SEL_LEGACY_TX_NET_UTIL; | ||
3673 | |||
3674 | device_config->vp_config[i].tti.ltimer_val = | ||
3675 | (VXGE_TTI_LTIMER_VAL * 1000) / 272; | ||
3676 | |||
3677 | device_config->vp_config[i].tti.rtimer_val = | ||
3678 | (VXGE_TTI_RTIMER_VAL * 1000) / 272; | ||
3679 | |||
3680 | device_config->vp_config[i].tti.urange_a = TTI_TX_URANGE_A; | ||
3681 | device_config->vp_config[i].tti.urange_b = TTI_TX_URANGE_B; | ||
3682 | device_config->vp_config[i].tti.urange_c = TTI_TX_URANGE_C; | ||
3683 | device_config->vp_config[i].tti.uec_a = TTI_TX_UFC_A; | ||
3684 | device_config->vp_config[i].tti.uec_b = TTI_TX_UFC_B; | ||
3685 | device_config->vp_config[i].tti.uec_c = TTI_TX_UFC_C; | ||
3686 | device_config->vp_config[i].tti.uec_d = TTI_TX_UFC_D; | ||
3687 | |||
3688 | /* Configure Rx rings */ | ||
3689 | device_config->vp_config[i].ring.enable = | ||
3690 | VXGE_HW_RING_ENABLE; | ||
3691 | |||
3692 | device_config->vp_config[i].ring.ring_blocks = | ||
3693 | VXGE_HW_DEF_RING_BLOCKS; | ||
3694 | device_config->vp_config[i].ring.buffer_mode = | ||
3695 | VXGE_HW_RING_RXD_BUFFER_MODE_1; | ||
3696 | device_config->vp_config[i].ring.rxds_limit = | ||
3697 | VXGE_HW_DEF_RING_RXDS_LIMIT; | ||
3698 | device_config->vp_config[i].ring.scatter_mode = | ||
3699 | VXGE_HW_RING_SCATTER_MODE_A; | ||
3700 | |||
3701 | /* Configure rti properties */ | ||
3702 | device_config->vp_config[i].rti.intr_enable = | ||
3703 | VXGE_HW_TIM_INTR_ENABLE; | ||
3704 | |||
3705 | device_config->vp_config[i].rti.btimer_val = | ||
3706 | (VXGE_RTI_BTIMER_VAL * 1000)/272; | ||
3707 | |||
3708 | device_config->vp_config[i].rti.timer_ac_en = | ||
3709 | VXGE_HW_TIM_TIMER_AC_ENABLE; | ||
3710 | |||
3711 | device_config->vp_config[i].rti.timer_ci_en = | ||
3712 | VXGE_HW_TIM_TIMER_CI_DISABLE; | ||
3713 | |||
3714 | device_config->vp_config[i].rti.timer_ri_en = | ||
3715 | VXGE_HW_TIM_TIMER_RI_DISABLE; | ||
3716 | |||
3717 | device_config->vp_config[i].rti.util_sel = | ||
3718 | VXGE_HW_TIM_UTIL_SEL_LEGACY_RX_NET_UTIL; | ||
3719 | |||
3720 | device_config->vp_config[i].rti.urange_a = | ||
3721 | RTI_RX_URANGE_A; | ||
3722 | device_config->vp_config[i].rti.urange_b = | ||
3723 | RTI_RX_URANGE_B; | ||
3724 | device_config->vp_config[i].rti.urange_c = | ||
3725 | RTI_RX_URANGE_C; | ||
3726 | device_config->vp_config[i].rti.uec_a = RTI_RX_UFC_A; | ||
3727 | device_config->vp_config[i].rti.uec_b = RTI_RX_UFC_B; | ||
3728 | device_config->vp_config[i].rti.uec_c = RTI_RX_UFC_C; | ||
3729 | device_config->vp_config[i].rti.uec_d = RTI_RX_UFC_D; | ||
3730 | |||
3731 | device_config->vp_config[i].rti.rtimer_val = | ||
3732 | (VXGE_RTI_RTIMER_VAL * 1000) / 272; | ||
3733 | |||
3734 | device_config->vp_config[i].rti.ltimer_val = | ||
3735 | (VXGE_RTI_LTIMER_VAL * 1000) / 272; | ||
3736 | |||
3737 | device_config->vp_config[i].rpa_strip_vlan_tag = | ||
3738 | vlan_tag_strip; | ||
3739 | } | ||
3740 | |||
3741 | driver_config->vpath_per_dev = temp; | ||
3742 | return no_of_vpaths; | ||
3743 | } | ||
3744 | |||
3745 | /* initialize device configuratrions */ | ||
3746 | static void __devinit vxge_device_config_init( | ||
3747 | struct vxge_hw_device_config *device_config, | ||
3748 | int *intr_type) | ||
3749 | { | ||
3750 | /* Used for CQRQ/SRQ. */ | ||
3751 | device_config->dma_blockpool_initial = | ||
3752 | VXGE_HW_INITIAL_DMA_BLOCK_POOL_SIZE; | ||
3753 | |||
3754 | device_config->dma_blockpool_max = | ||
3755 | VXGE_HW_MAX_DMA_BLOCK_POOL_SIZE; | ||
3756 | |||
3757 | if (max_mac_vpath > VXGE_MAX_MAC_ADDR_COUNT) | ||
3758 | max_mac_vpath = VXGE_MAX_MAC_ADDR_COUNT; | ||
3759 | |||
3760 | #ifndef CONFIG_PCI_MSI | ||
3761 | vxge_debug_init(VXGE_ERR, | ||
3762 | "%s: This Kernel does not support " | ||
3763 | "MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME); | ||
3764 | *intr_type = INTA; | ||
3765 | #endif | ||
3766 | |||
3767 | /* Configure whether MSI-X or IRQL. */ | ||
3768 | switch (*intr_type) { | ||
3769 | case INTA: | ||
3770 | device_config->intr_mode = VXGE_HW_INTR_MODE_IRQLINE; | ||
3771 | break; | ||
3772 | |||
3773 | case MSI_X: | ||
3774 | device_config->intr_mode = VXGE_HW_INTR_MODE_MSIX; | ||
3775 | break; | ||
3776 | } | ||
3777 | /* Timer period between device poll */ | ||
3778 | device_config->device_poll_millis = VXGE_TIMER_DELAY; | ||
3779 | |||
3780 | /* Configure mac based steering. */ | ||
3781 | device_config->rts_mac_en = addr_learn_en; | ||
3782 | |||
3783 | /* Configure Vpaths */ | ||
3784 | device_config->rth_it_type = VXGE_HW_RTH_IT_TYPE_MULTI_IT; | ||
3785 | |||
3786 | vxge_debug_ll_config(VXGE_TRACE, "%s : Device Config Params ", | ||
3787 | __func__); | ||
3788 | vxge_debug_ll_config(VXGE_TRACE, "dma_blockpool_initial : %d", | ||
3789 | device_config->dma_blockpool_initial); | ||
3790 | vxge_debug_ll_config(VXGE_TRACE, "dma_blockpool_max : %d", | ||
3791 | device_config->dma_blockpool_max); | ||
3792 | vxge_debug_ll_config(VXGE_TRACE, "intr_mode : %d", | ||
3793 | device_config->intr_mode); | ||
3794 | vxge_debug_ll_config(VXGE_TRACE, "device_poll_millis : %d", | ||
3795 | device_config->device_poll_millis); | ||
3796 | vxge_debug_ll_config(VXGE_TRACE, "rts_mac_en : %d", | ||
3797 | device_config->rts_mac_en); | ||
3798 | vxge_debug_ll_config(VXGE_TRACE, "rth_en : %d", | ||
3799 | device_config->rth_en); | ||
3800 | vxge_debug_ll_config(VXGE_TRACE, "rth_it_type : %d", | ||
3801 | device_config->rth_it_type); | ||
3802 | } | ||
3803 | |||
3804 | static void __devinit vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask) | ||
3805 | { | ||
3806 | int i; | ||
3807 | |||
3808 | vxge_debug_init(VXGE_TRACE, | ||
3809 | "%s: %d Vpath(s) opened", | ||
3810 | vdev->ndev->name, vdev->no_of_vpath); | ||
3811 | |||
3812 | switch (vdev->config.intr_type) { | ||
3813 | case INTA: | ||
3814 | vxge_debug_init(VXGE_TRACE, | ||
3815 | "%s: Interrupt type INTA", vdev->ndev->name); | ||
3816 | break; | ||
3817 | |||
3818 | case MSI_X: | ||
3819 | vxge_debug_init(VXGE_TRACE, | ||
3820 | "%s: Interrupt type MSI-X", vdev->ndev->name); | ||
3821 | break; | ||
3822 | } | ||
3823 | |||
3824 | if (vdev->config.rth_steering) { | ||
3825 | vxge_debug_init(VXGE_TRACE, | ||
3826 | "%s: RTH steering enabled for TCP_IPV4", | ||
3827 | vdev->ndev->name); | ||
3828 | } else { | ||
3829 | vxge_debug_init(VXGE_TRACE, | ||
3830 | "%s: RTH steering disabled", vdev->ndev->name); | ||
3831 | } | ||
3832 | |||
3833 | switch (vdev->config.tx_steering_type) { | ||
3834 | case NO_STEERING: | ||
3835 | vxge_debug_init(VXGE_TRACE, | ||
3836 | "%s: Tx steering disabled", vdev->ndev->name); | ||
3837 | break; | ||
3838 | case TX_PRIORITY_STEERING: | ||
3839 | vxge_debug_init(VXGE_TRACE, | ||
3840 | "%s: Unsupported tx steering option", | ||
3841 | vdev->ndev->name); | ||
3842 | vxge_debug_init(VXGE_TRACE, | ||
3843 | "%s: Tx steering disabled", vdev->ndev->name); | ||
3844 | vdev->config.tx_steering_type = 0; | ||
3845 | break; | ||
3846 | case TX_VLAN_STEERING: | ||
3847 | vxge_debug_init(VXGE_TRACE, | ||
3848 | "%s: Unsupported tx steering option", | ||
3849 | vdev->ndev->name); | ||
3850 | vxge_debug_init(VXGE_TRACE, | ||
3851 | "%s: Tx steering disabled", vdev->ndev->name); | ||
3852 | vdev->config.tx_steering_type = 0; | ||
3853 | break; | ||
3854 | case TX_MULTIQ_STEERING: | ||
3855 | vxge_debug_init(VXGE_TRACE, | ||
3856 | "%s: Tx multiqueue steering enabled", | ||
3857 | vdev->ndev->name); | ||
3858 | break; | ||
3859 | case TX_PORT_STEERING: | ||
3860 | vxge_debug_init(VXGE_TRACE, | ||
3861 | "%s: Tx port steering enabled", | ||
3862 | vdev->ndev->name); | ||
3863 | break; | ||
3864 | default: | ||
3865 | vxge_debug_init(VXGE_ERR, | ||
3866 | "%s: Unsupported tx steering type", | ||
3867 | vdev->ndev->name); | ||
3868 | vxge_debug_init(VXGE_TRACE, | ||
3869 | "%s: Tx steering disabled", vdev->ndev->name); | ||
3870 | vdev->config.tx_steering_type = 0; | ||
3871 | } | ||
3872 | |||
3873 | if (vdev->config.gro_enable) { | ||
3874 | vxge_debug_init(VXGE_ERR, | ||
3875 | "%s: Generic receive offload enabled", | ||
3876 | vdev->ndev->name); | ||
3877 | } else | ||
3878 | vxge_debug_init(VXGE_TRACE, | ||
3879 | "%s: Generic receive offload disabled", | ||
3880 | vdev->ndev->name); | ||
3881 | |||
3882 | if (vdev->config.addr_learn_en) | ||
3883 | vxge_debug_init(VXGE_TRACE, | ||
3884 | "%s: MAC Address learning enabled", vdev->ndev->name); | ||
3885 | |||
3886 | vxge_debug_init(VXGE_TRACE, | ||
3887 | "%s: Rx doorbell mode enabled", vdev->ndev->name); | ||
3888 | |||
3889 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | ||
3890 | if (!vxge_bVALn(vpath_mask, i, 1)) | ||
3891 | continue; | ||
3892 | vxge_debug_ll_config(VXGE_TRACE, | ||
3893 | "%s: MTU size - %d", vdev->ndev->name, | ||
3894 | ((struct __vxge_hw_device *)(vdev->devh))-> | ||
3895 | config.vp_config[i].mtu); | ||
3896 | vxge_debug_init(VXGE_TRACE, | ||
3897 | "%s: VLAN tag stripping %s", vdev->ndev->name, | ||
3898 | ((struct __vxge_hw_device *)(vdev->devh))-> | ||
3899 | config.vp_config[i].rpa_strip_vlan_tag | ||
3900 | ? "Enabled" : "Disabled"); | ||
3901 | vxge_debug_init(VXGE_TRACE, | ||
3902 | "%s: Ring blocks : %d", vdev->ndev->name, | ||
3903 | ((struct __vxge_hw_device *)(vdev->devh))-> | ||
3904 | config.vp_config[i].ring.ring_blocks); | ||
3905 | vxge_debug_init(VXGE_TRACE, | ||
3906 | "%s: Fifo blocks : %d", vdev->ndev->name, | ||
3907 | ((struct __vxge_hw_device *)(vdev->devh))-> | ||
3908 | config.vp_config[i].fifo.fifo_blocks); | ||
3909 | vxge_debug_ll_config(VXGE_TRACE, | ||
3910 | "%s: Max frags : %d", vdev->ndev->name, | ||
3911 | ((struct __vxge_hw_device *)(vdev->devh))-> | ||
3912 | config.vp_config[i].fifo.max_frags); | ||
3913 | break; | ||
3914 | } | ||
3915 | } | ||
3916 | |||
3917 | #ifdef CONFIG_PM | ||
3918 | /** | ||
3919 | * vxge_pm_suspend - vxge power management suspend entry point | ||
3920 | * | ||
3921 | */ | ||
3922 | static int vxge_pm_suspend(struct pci_dev *pdev, pm_message_t state) | ||
3923 | { | ||
3924 | return -ENOSYS; | ||
3925 | } | ||
3926 | /** | ||
3927 | * vxge_pm_resume - vxge power management resume entry point | ||
3928 | * | ||
3929 | */ | ||
3930 | static int vxge_pm_resume(struct pci_dev *pdev) | ||
3931 | { | ||
3932 | return -ENOSYS; | ||
3933 | } | ||
3934 | |||
3935 | #endif | ||
3936 | |||
3937 | /** | ||
3938 | * vxge_io_error_detected - called when PCI error is detected | ||
3939 | * @pdev: Pointer to PCI device | ||
3940 | * @state: The current pci connection state | ||
3941 | * | ||
3942 | * This function is called after a PCI bus error affecting | ||
3943 | * this device has been detected. | ||
3944 | */ | ||
3945 | static pci_ers_result_t vxge_io_error_detected(struct pci_dev *pdev, | ||
3946 | pci_channel_state_t state) | ||
3947 | { | ||
3948 | struct __vxge_hw_device *hldev = | ||
3949 | (struct __vxge_hw_device *) pci_get_drvdata(pdev); | ||
3950 | struct net_device *netdev = hldev->ndev; | ||
3951 | |||
3952 | netif_device_detach(netdev); | ||
3953 | |||
3954 | if (netif_running(netdev)) { | ||
3955 | /* Bring down the card, while avoiding PCI I/O */ | ||
3956 | do_vxge_close(netdev, 0); | ||
3957 | } | ||
3958 | |||
3959 | pci_disable_device(pdev); | ||
3960 | |||
3961 | return PCI_ERS_RESULT_NEED_RESET; | ||
3962 | } | ||
3963 | |||
3964 | /** | ||
3965 | * vxge_io_slot_reset - called after the pci bus has been reset. | ||
3966 | * @pdev: Pointer to PCI device | ||
3967 | * | ||
3968 | * Restart the card from scratch, as if from a cold-boot. | ||
3969 | * At this point, the card has exprienced a hard reset, | ||
3970 | * followed by fixups by BIOS, and has its config space | ||
3971 | * set up identically to what it was at cold boot. | ||
3972 | */ | ||
3973 | static pci_ers_result_t vxge_io_slot_reset(struct pci_dev *pdev) | ||
3974 | { | ||
3975 | struct __vxge_hw_device *hldev = | ||
3976 | (struct __vxge_hw_device *) pci_get_drvdata(pdev); | ||
3977 | struct net_device *netdev = hldev->ndev; | ||
3978 | |||
3979 | struct vxgedev *vdev = netdev_priv(netdev); | ||
3980 | |||
3981 | if (pci_enable_device(pdev)) { | ||
3982 | printk(KERN_ERR "%s: " | ||
3983 | "Cannot re-enable device after reset\n", | ||
3984 | VXGE_DRIVER_NAME); | ||
3985 | return PCI_ERS_RESULT_DISCONNECT; | ||
3986 | } | ||
3987 | |||
3988 | pci_set_master(pdev); | ||
3989 | vxge_reset(vdev); | ||
3990 | |||
3991 | return PCI_ERS_RESULT_RECOVERED; | ||
3992 | } | ||
3993 | |||
3994 | /** | ||
3995 | * vxge_io_resume - called when traffic can start flowing again. | ||
3996 | * @pdev: Pointer to PCI device | ||
3997 | * | ||
3998 | * This callback is called when the error recovery driver tells | ||
3999 | * us that its OK to resume normal operation. | ||
4000 | */ | ||
4001 | static void vxge_io_resume(struct pci_dev *pdev) | ||
4002 | { | ||
4003 | struct __vxge_hw_device *hldev = | ||
4004 | (struct __vxge_hw_device *) pci_get_drvdata(pdev); | ||
4005 | struct net_device *netdev = hldev->ndev; | ||
4006 | |||
4007 | if (netif_running(netdev)) { | ||
4008 | if (vxge_open(netdev)) { | ||
4009 | printk(KERN_ERR "%s: " | ||
4010 | "Can't bring device back up after reset\n", | ||
4011 | VXGE_DRIVER_NAME); | ||
4012 | return; | ||
4013 | } | ||
4014 | } | ||
4015 | |||
4016 | netif_device_attach(netdev); | ||
4017 | } | ||
4018 | |||
4019 | /** | ||
4020 | * vxge_probe | ||
4021 | * @pdev : structure containing the PCI related information of the device. | ||
4022 | * @pre: List of PCI devices supported by the driver listed in vxge_id_table. | ||
4023 | * Description: | ||
4024 | * This function is called when a new PCI device gets detected and initializes | ||
4025 | * it. | ||
4026 | * Return value: | ||
4027 | * returns 0 on success and negative on failure. | ||
4028 | * | ||
4029 | */ | ||
4030 | static int __devinit | ||
4031 | vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre) | ||
4032 | { | ||
4033 | struct __vxge_hw_device *hldev; | ||
4034 | enum vxge_hw_status status; | ||
4035 | int ret; | ||
4036 | int high_dma = 0; | ||
4037 | u64 vpath_mask = 0; | ||
4038 | struct vxgedev *vdev; | ||
4039 | struct vxge_config ll_config; | ||
4040 | struct vxge_hw_device_config *device_config = NULL; | ||
4041 | struct vxge_hw_device_attr attr; | ||
4042 | int i, j, no_of_vpath = 0, max_vpath_supported = 0; | ||
4043 | u8 *macaddr; | ||
4044 | struct vxge_mac_addrs *entry; | ||
4045 | static int bus = -1, device = -1; | ||
4046 | u8 new_device = 0; | ||
4047 | |||
4048 | vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | ||
4049 | attr.pdev = pdev; | ||
4050 | |||
4051 | if (bus != pdev->bus->number) | ||
4052 | new_device = 1; | ||
4053 | if (device != PCI_SLOT(pdev->devfn)) | ||
4054 | new_device = 1; | ||
4055 | |||
4056 | bus = pdev->bus->number; | ||
4057 | device = PCI_SLOT(pdev->devfn); | ||
4058 | |||
4059 | if (new_device) { | ||
4060 | if (driver_config->config_dev_cnt && | ||
4061 | (driver_config->config_dev_cnt != | ||
4062 | driver_config->total_dev_cnt)) | ||
4063 | vxge_debug_init(VXGE_ERR, | ||
4064 | "%s: Configured %d of %d devices", | ||
4065 | VXGE_DRIVER_NAME, | ||
4066 | driver_config->config_dev_cnt, | ||
4067 | driver_config->total_dev_cnt); | ||
4068 | driver_config->config_dev_cnt = 0; | ||
4069 | driver_config->total_dev_cnt = 0; | ||
4070 | driver_config->g_no_cpus = 0; | ||
4071 | driver_config->vpath_per_dev = max_config_vpath; | ||
4072 | } | ||
4073 | |||
4074 | driver_config->total_dev_cnt++; | ||
4075 | if (++driver_config->config_dev_cnt > max_config_dev) { | ||
4076 | ret = 0; | ||
4077 | goto _exit0; | ||
4078 | } | ||
4079 | |||
4080 | device_config = kzalloc(sizeof(struct vxge_hw_device_config), | ||
4081 | GFP_KERNEL); | ||
4082 | if (!device_config) { | ||
4083 | ret = -ENOMEM; | ||
4084 | vxge_debug_init(VXGE_ERR, | ||
4085 | "device_config : malloc failed %s %d", | ||
4086 | __FILE__, __LINE__); | ||
4087 | goto _exit0; | ||
4088 | } | ||
4089 | |||
4090 | memset(&ll_config, 0, sizeof(struct vxge_config)); | ||
4091 | ll_config.tx_steering_type = TX_MULTIQ_STEERING; | ||
4092 | ll_config.intr_type = MSI_X; | ||
4093 | ll_config.napi_weight = NEW_NAPI_WEIGHT; | ||
4094 | ll_config.rth_steering = RTH_STEERING; | ||
4095 | |||
4096 | /* get the default configuration parameters */ | ||
4097 | vxge_hw_device_config_default_get(device_config); | ||
4098 | |||
4099 | /* initialize configuration parameters */ | ||
4100 | vxge_device_config_init(device_config, &ll_config.intr_type); | ||
4101 | |||
4102 | ret = pci_enable_device(pdev); | ||
4103 | if (ret) { | ||
4104 | vxge_debug_init(VXGE_ERR, | ||
4105 | "%s : can not enable PCI device", __func__); | ||
4106 | goto _exit0; | ||
4107 | } | ||
4108 | |||
4109 | if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) { | ||
4110 | vxge_debug_ll_config(VXGE_TRACE, | ||
4111 | "%s : using 64bit DMA", __func__); | ||
4112 | |||
4113 | high_dma = 1; | ||
4114 | |||
4115 | if (pci_set_consistent_dma_mask(pdev, | ||
4116 | 0xffffffffffffffffULL)) { | ||
4117 | vxge_debug_init(VXGE_ERR, | ||
4118 | "%s : unable to obtain 64bit DMA for " | ||
4119 | "consistent allocations", __func__); | ||
4120 | ret = -ENOMEM; | ||
4121 | goto _exit1; | ||
4122 | } | ||
4123 | } else if (!pci_set_dma_mask(pdev, 0xffffffffUL)) { | ||
4124 | vxge_debug_ll_config(VXGE_TRACE, | ||
4125 | "%s : using 32bit DMA", __func__); | ||
4126 | } else { | ||
4127 | ret = -ENOMEM; | ||
4128 | goto _exit1; | ||
4129 | } | ||
4130 | |||
4131 | if (pci_request_regions(pdev, VXGE_DRIVER_NAME)) { | ||
4132 | vxge_debug_init(VXGE_ERR, | ||
4133 | "%s : request regions failed", __func__); | ||
4134 | ret = -ENODEV; | ||
4135 | goto _exit1; | ||
4136 | } | ||
4137 | |||
4138 | pci_set_master(pdev); | ||
4139 | |||
4140 | attr.bar0 = pci_ioremap_bar(pdev, 0); | ||
4141 | if (!attr.bar0) { | ||
4142 | vxge_debug_init(VXGE_ERR, | ||
4143 | "%s : cannot remap io memory bar0", __func__); | ||
4144 | ret = -ENODEV; | ||
4145 | goto _exit2; | ||
4146 | } | ||
4147 | vxge_debug_ll_config(VXGE_TRACE, | ||
4148 | "pci ioremap bar0: %p:0x%llx", | ||
4149 | attr.bar0, | ||
4150 | (unsigned long long)pci_resource_start(pdev, 0)); | ||
4151 | |||
4152 | attr.bar1 = pci_ioremap_bar(pdev, 2); | ||
4153 | if (!attr.bar1) { | ||
4154 | vxge_debug_init(VXGE_ERR, | ||
4155 | "%s : cannot remap io memory bar2", __func__); | ||
4156 | ret = -ENODEV; | ||
4157 | goto _exit3; | ||
4158 | } | ||
4159 | vxge_debug_ll_config(VXGE_TRACE, | ||
4160 | "pci ioremap bar1: %p:0x%llx", | ||
4161 | attr.bar1, | ||
4162 | (unsigned long long)pci_resource_start(pdev, 2)); | ||
4163 | |||
4164 | status = vxge_hw_device_hw_info_get(attr.bar0, | ||
4165 | &ll_config.device_hw_info); | ||
4166 | if (status != VXGE_HW_OK) { | ||
4167 | vxge_debug_init(VXGE_ERR, | ||
4168 | "%s: Reading of hardware info failed." | ||
4169 | "Please try upgrading the firmware.", VXGE_DRIVER_NAME); | ||
4170 | ret = -EINVAL; | ||
4171 | goto _exit4; | ||
4172 | } | ||
4173 | |||
4174 | if (ll_config.device_hw_info.fw_version.major != | ||
4175 | VXGE_DRIVER_VERSION_MAJOR) { | ||
4176 | vxge_debug_init(VXGE_ERR, | ||
4177 | "FW Ver.(maj): %d not driver's expected version: %d", | ||
4178 | ll_config.device_hw_info.fw_version.major, | ||
4179 | VXGE_DRIVER_VERSION_MAJOR); | ||
4180 | ret = -EINVAL; | ||
4181 | goto _exit4; | ||
4182 | } | ||
4183 | |||
4184 | vpath_mask = ll_config.device_hw_info.vpath_mask; | ||
4185 | if (vpath_mask == 0) { | ||
4186 | vxge_debug_ll_config(VXGE_TRACE, | ||
4187 | "%s: No vpaths available in device", VXGE_DRIVER_NAME); | ||
4188 | ret = -EINVAL; | ||
4189 | goto _exit4; | ||
4190 | } | ||
4191 | |||
4192 | vxge_debug_ll_config(VXGE_TRACE, | ||
4193 | "%s:%d Vpath mask = %llx", __func__, __LINE__, | ||
4194 | (unsigned long long)vpath_mask); | ||
4195 | |||
4196 | /* Check how many vpaths are available */ | ||
4197 | for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | ||
4198 | if (!((vpath_mask) & vxge_mBIT(i))) | ||
4199 | continue; | ||
4200 | max_vpath_supported++; | ||
4201 | } | ||
4202 | |||
4203 | /* | ||
4204 | * Configure vpaths and get driver configured number of vpaths | ||
4205 | * which is less than or equal to the maximum vpaths per function. | ||
4206 | */ | ||
4207 | no_of_vpath = vxge_config_vpaths(device_config, vpath_mask, &ll_config); | ||
4208 | if (!no_of_vpath) { | ||
4209 | vxge_debug_ll_config(VXGE_ERR, | ||
4210 | "%s: No more vpaths to configure", VXGE_DRIVER_NAME); | ||
4211 | ret = 0; | ||
4212 | goto _exit4; | ||
4213 | } | ||
4214 | |||
4215 | /* Setting driver callbacks */ | ||
4216 | attr.uld_callbacks.link_up = vxge_callback_link_up; | ||
4217 | attr.uld_callbacks.link_down = vxge_callback_link_down; | ||
4218 | attr.uld_callbacks.crit_err = vxge_callback_crit_err; | ||
4219 | |||
4220 | status = vxge_hw_device_initialize(&hldev, &attr, device_config); | ||
4221 | if (status != VXGE_HW_OK) { | ||
4222 | vxge_debug_init(VXGE_ERR, | ||
4223 | "Failed to initialize device (%d)", status); | ||
4224 | ret = -EINVAL; | ||
4225 | goto _exit4; | ||
4226 | } | ||
4227 | |||
4228 | vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL); | ||
4229 | |||
4230 | /* set private device info */ | ||
4231 | pci_set_drvdata(pdev, hldev); | ||
4232 | |||
4233 | ll_config.gro_enable = VXGE_GRO_ALWAYS_AGGREGATE; | ||
4234 | ll_config.fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS; | ||
4235 | ll_config.addr_learn_en = addr_learn_en; | ||
4236 | ll_config.rth_algorithm = RTH_ALG_JENKINS; | ||
4237 | ll_config.rth_hash_type_tcpipv4 = VXGE_HW_RING_HASH_TYPE_TCP_IPV4; | ||
4238 | ll_config.rth_hash_type_ipv4 = VXGE_HW_RING_HASH_TYPE_NONE; | ||
4239 | ll_config.rth_hash_type_tcpipv6 = VXGE_HW_RING_HASH_TYPE_NONE; | ||
4240 | ll_config.rth_hash_type_ipv6 = VXGE_HW_RING_HASH_TYPE_NONE; | ||
4241 | ll_config.rth_hash_type_tcpipv6ex = VXGE_HW_RING_HASH_TYPE_NONE; | ||
4242 | ll_config.rth_hash_type_ipv6ex = VXGE_HW_RING_HASH_TYPE_NONE; | ||
4243 | ll_config.rth_bkt_sz = RTH_BUCKET_SIZE; | ||
4244 | ll_config.tx_pause_enable = VXGE_PAUSE_CTRL_ENABLE; | ||
4245 | ll_config.rx_pause_enable = VXGE_PAUSE_CTRL_ENABLE; | ||
4246 | |||
4247 | if (vxge_device_register(hldev, &ll_config, high_dma, no_of_vpath, | ||
4248 | &vdev)) { | ||
4249 | ret = -EINVAL; | ||
4250 | goto _exit5; | ||
4251 | } | ||
4252 | |||
4253 | vxge_hw_device_debug_set(hldev, VXGE_TRACE, VXGE_COMPONENT_LL); | ||
4254 | VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev), | ||
4255 | vxge_hw_device_trace_level_get(hldev)); | ||
4256 | |||
4257 | /* set private HW device info */ | ||
4258 | hldev->ndev = vdev->ndev; | ||
4259 | vdev->mtu = VXGE_HW_DEFAULT_MTU; | ||
4260 | vdev->bar0 = attr.bar0; | ||
4261 | vdev->bar1 = attr.bar1; | ||
4262 | vdev->max_vpath_supported = max_vpath_supported; | ||
4263 | vdev->no_of_vpath = no_of_vpath; | ||
4264 | |||
4265 | /* Virtual Path count */ | ||
4266 | for (i = 0, j = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | ||
4267 | if (!vxge_bVALn(vpath_mask, i, 1)) | ||
4268 | continue; | ||
4269 | if (j >= vdev->no_of_vpath) | ||
4270 | break; | ||
4271 | |||
4272 | vdev->vpaths[j].is_configured = 1; | ||
4273 | vdev->vpaths[j].device_id = i; | ||
4274 | vdev->vpaths[j].fifo.driver_id = j; | ||
4275 | vdev->vpaths[j].ring.driver_id = j; | ||
4276 | vdev->vpaths[j].vdev = vdev; | ||
4277 | vdev->vpaths[j].max_mac_addr_cnt = max_mac_vpath; | ||
4278 | memcpy((u8 *)vdev->vpaths[j].macaddr, | ||
4279 | (u8 *)ll_config.device_hw_info.mac_addrs[i], | ||
4280 | ETH_ALEN); | ||
4281 | |||
4282 | /* Initialize the mac address list header */ | ||
4283 | INIT_LIST_HEAD(&vdev->vpaths[j].mac_addr_list); | ||
4284 | |||
4285 | vdev->vpaths[j].mac_addr_cnt = 0; | ||
4286 | vdev->vpaths[j].mcast_addr_cnt = 0; | ||
4287 | j++; | ||
4288 | } | ||
4289 | vdev->exec_mode = VXGE_EXEC_MODE_DISABLE; | ||
4290 | vdev->max_config_port = max_config_port; | ||
4291 | |||
4292 | vdev->vlan_tag_strip = vlan_tag_strip; | ||
4293 | |||
4294 | /* map the hashing selector table to the configured vpaths */ | ||
4295 | for (i = 0; i < vdev->no_of_vpath; i++) | ||
4296 | vdev->vpath_selector[i] = vpath_selector[i]; | ||
4297 | |||
4298 | macaddr = (u8 *)vdev->vpaths[0].macaddr; | ||
4299 | |||
4300 | ll_config.device_hw_info.serial_number[VXGE_HW_INFO_LEN - 1] = '\0'; | ||
4301 | ll_config.device_hw_info.product_desc[VXGE_HW_INFO_LEN - 1] = '\0'; | ||
4302 | ll_config.device_hw_info.part_number[VXGE_HW_INFO_LEN - 1] = '\0'; | ||
4303 | |||
4304 | vxge_debug_init(VXGE_TRACE, "%s: SERIAL NUMBER: %s", | ||
4305 | vdev->ndev->name, ll_config.device_hw_info.serial_number); | ||
4306 | |||
4307 | vxge_debug_init(VXGE_TRACE, "%s: PART NUMBER: %s", | ||
4308 | vdev->ndev->name, ll_config.device_hw_info.part_number); | ||
4309 | |||
4310 | vxge_debug_init(VXGE_TRACE, "%s: Neterion %s Server Adapter", | ||
4311 | vdev->ndev->name, ll_config.device_hw_info.product_desc); | ||
4312 | |||
4313 | vxge_debug_init(VXGE_TRACE, | ||
4314 | "%s: MAC ADDR: %02X:%02X:%02X:%02X:%02X:%02X", | ||
4315 | vdev->ndev->name, macaddr[0], macaddr[1], macaddr[2], | ||
4316 | macaddr[3], macaddr[4], macaddr[5]); | ||
4317 | |||
4318 | vxge_debug_init(VXGE_TRACE, "%s: Link Width x%d", | ||
4319 | vdev->ndev->name, vxge_hw_device_link_width_get(hldev)); | ||
4320 | |||
4321 | vxge_debug_init(VXGE_TRACE, | ||
4322 | "%s: Firmware version : %s Date : %s", vdev->ndev->name, | ||
4323 | ll_config.device_hw_info.fw_version.version, | ||
4324 | ll_config.device_hw_info.fw_date.date); | ||
4325 | |||
4326 | vxge_print_parm(vdev, vpath_mask); | ||
4327 | |||
4328 | /* Store the fw version for ethttool option */ | ||
4329 | strcpy(vdev->fw_version, ll_config.device_hw_info.fw_version.version); | ||
4330 | memcpy(vdev->ndev->dev_addr, (u8 *)vdev->vpaths[0].macaddr, ETH_ALEN); | ||
4331 | memcpy(vdev->ndev->perm_addr, vdev->ndev->dev_addr, ETH_ALEN); | ||
4332 | |||
4333 | /* Copy the station mac address to the list */ | ||
4334 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
4335 | entry = (struct vxge_mac_addrs *) | ||
4336 | kzalloc(sizeof(struct vxge_mac_addrs), | ||
4337 | GFP_KERNEL); | ||
4338 | if (NULL == entry) { | ||
4339 | vxge_debug_init(VXGE_ERR, | ||
4340 | "%s: mac_addr_list : memory allocation failed", | ||
4341 | vdev->ndev->name); | ||
4342 | ret = -EPERM; | ||
4343 | goto _exit6; | ||
4344 | } | ||
4345 | macaddr = (u8 *)&entry->macaddr; | ||
4346 | memcpy(macaddr, vdev->ndev->dev_addr, ETH_ALEN); | ||
4347 | list_add(&entry->item, &vdev->vpaths[i].mac_addr_list); | ||
4348 | vdev->vpaths[i].mac_addr_cnt = 1; | ||
4349 | } | ||
4350 | |||
4351 | vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d Exiting...", | ||
4352 | vdev->ndev->name, __func__, __LINE__); | ||
4353 | |||
4354 | vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL); | ||
4355 | VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev), | ||
4356 | vxge_hw_device_trace_level_get(hldev)); | ||
4357 | |||
4358 | return 0; | ||
4359 | |||
4360 | _exit6: | ||
4361 | for (i = 0; i < vdev->no_of_vpath; i++) | ||
4362 | vxge_free_mac_add_list(&vdev->vpaths[i]); | ||
4363 | |||
4364 | vxge_device_unregister(hldev); | ||
4365 | _exit5: | ||
4366 | vxge_hw_device_terminate(hldev); | ||
4367 | _exit4: | ||
4368 | iounmap(attr.bar1); | ||
4369 | _exit3: | ||
4370 | iounmap(attr.bar0); | ||
4371 | _exit2: | ||
4372 | pci_release_regions(pdev); | ||
4373 | _exit1: | ||
4374 | pci_disable_device(pdev); | ||
4375 | _exit0: | ||
4376 | kfree(device_config); | ||
4377 | driver_config->config_dev_cnt--; | ||
4378 | pci_set_drvdata(pdev, NULL); | ||
4379 | return ret; | ||
4380 | } | ||
4381 | |||
4382 | /** | ||
4383 | * vxge_rem_nic - Free the PCI device | ||
4384 | * @pdev: structure containing the PCI related information of the device. | ||
4385 | * Description: This function is called by the Pci subsystem to release a | ||
4386 | * PCI device and free up all resource held up by the device. | ||
4387 | */ | ||
4388 | static void __devexit | ||
4389 | vxge_remove(struct pci_dev *pdev) | ||
4390 | { | ||
4391 | struct __vxge_hw_device *hldev; | ||
4392 | struct vxgedev *vdev = NULL; | ||
4393 | struct net_device *dev; | ||
4394 | int i = 0; | ||
4395 | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | ||
4396 | (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | ||
4397 | u32 level_trace; | ||
4398 | #endif | ||
4399 | |||
4400 | hldev = (struct __vxge_hw_device *) pci_get_drvdata(pdev); | ||
4401 | |||
4402 | if (hldev == NULL) | ||
4403 | return; | ||
4404 | dev = hldev->ndev; | ||
4405 | vdev = netdev_priv(dev); | ||
4406 | |||
4407 | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | ||
4408 | (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | ||
4409 | level_trace = vdev->level_trace; | ||
4410 | #endif | ||
4411 | vxge_debug_entryexit(level_trace, | ||
4412 | "%s:%d", __func__, __LINE__); | ||
4413 | |||
4414 | vxge_debug_init(level_trace, | ||
4415 | "%s : removing PCI device...", __func__); | ||
4416 | vxge_device_unregister(hldev); | ||
4417 | |||
4418 | for (i = 0; i < vdev->no_of_vpath; i++) { | ||
4419 | vxge_free_mac_add_list(&vdev->vpaths[i]); | ||
4420 | vdev->vpaths[i].mcast_addr_cnt = 0; | ||
4421 | vdev->vpaths[i].mac_addr_cnt = 0; | ||
4422 | } | ||
4423 | |||
4424 | kfree(vdev->vpaths); | ||
4425 | |||
4426 | iounmap(vdev->bar0); | ||
4427 | iounmap(vdev->bar1); | ||
4428 | |||
4429 | /* we are safe to free it now */ | ||
4430 | free_netdev(dev); | ||
4431 | |||
4432 | vxge_debug_init(level_trace, | ||
4433 | "%s:%d Device unregistered", __func__, __LINE__); | ||
4434 | |||
4435 | vxge_hw_device_terminate(hldev); | ||
4436 | |||
4437 | pci_disable_device(pdev); | ||
4438 | pci_release_regions(pdev); | ||
4439 | pci_set_drvdata(pdev, NULL); | ||
4440 | vxge_debug_entryexit(level_trace, | ||
4441 | "%s:%d Exiting...", __func__, __LINE__); | ||
4442 | } | ||
4443 | |||
4444 | static struct pci_error_handlers vxge_err_handler = { | ||
4445 | .error_detected = vxge_io_error_detected, | ||
4446 | .slot_reset = vxge_io_slot_reset, | ||
4447 | .resume = vxge_io_resume, | ||
4448 | }; | ||
4449 | |||
4450 | static struct pci_driver vxge_driver = { | ||
4451 | .name = VXGE_DRIVER_NAME, | ||
4452 | .id_table = vxge_id_table, | ||
4453 | .probe = vxge_probe, | ||
4454 | .remove = __devexit_p(vxge_remove), | ||
4455 | #ifdef CONFIG_PM | ||
4456 | .suspend = vxge_pm_suspend, | ||
4457 | .resume = vxge_pm_resume, | ||
4458 | #endif | ||
4459 | .err_handler = &vxge_err_handler, | ||
4460 | }; | ||
4461 | |||
4462 | static int __init | ||
4463 | vxge_starter(void) | ||
4464 | { | ||
4465 | int ret = 0; | ||
4466 | char version[32]; | ||
4467 | snprintf(version, 32, "%s", DRV_VERSION); | ||
4468 | |||
4469 | printk(KERN_CRIT "%s: Copyright(c) 2002-2009 Neterion Inc\n", | ||
4470 | VXGE_DRIVER_NAME); | ||
4471 | printk(KERN_CRIT "%s: Driver version: %s\n", | ||
4472 | VXGE_DRIVER_NAME, version); | ||
4473 | |||
4474 | verify_bandwidth(); | ||
4475 | |||
4476 | driver_config = kzalloc(sizeof(struct vxge_drv_config), GFP_KERNEL); | ||
4477 | if (!driver_config) | ||
4478 | return -ENOMEM; | ||
4479 | |||
4480 | ret = pci_register_driver(&vxge_driver); | ||
4481 | |||
4482 | if (driver_config->config_dev_cnt && | ||
4483 | (driver_config->config_dev_cnt != driver_config->total_dev_cnt)) | ||
4484 | vxge_debug_init(VXGE_ERR, | ||
4485 | "%s: Configured %d of %d devices", | ||
4486 | VXGE_DRIVER_NAME, driver_config->config_dev_cnt, | ||
4487 | driver_config->total_dev_cnt); | ||
4488 | |||
4489 | if (ret) | ||
4490 | kfree(driver_config); | ||
4491 | |||
4492 | return ret; | ||
4493 | } | ||
4494 | |||
4495 | static void __exit | ||
4496 | vxge_closer(void) | ||
4497 | { | ||
4498 | pci_unregister_driver(&vxge_driver); | ||
4499 | kfree(driver_config); | ||
4500 | } | ||
4501 | module_init(vxge_starter); | ||
4502 | module_exit(vxge_closer); | ||