diff options
Diffstat (limited to 'drivers/net/usb/smsc75xx.c')
-rw-r--r-- | drivers/net/usb/smsc75xx.c | 1288 |
1 files changed, 1288 insertions, 0 deletions
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c new file mode 100644 index 000000000000..300e3e764fa2 --- /dev/null +++ b/drivers/net/usb/smsc75xx.c | |||
@@ -0,0 +1,1288 @@ | |||
1 | /*************************************************************************** | ||
2 | * | ||
3 | * Copyright (C) 2007-2010 SMSC | ||
4 | * | ||
5 | * This program is free software; you can redistribute it and/or | ||
6 | * modify it under the terms of the GNU General Public License | ||
7 | * as published by the Free Software Foundation; either version 2 | ||
8 | * of the License, or (at your option) any later version. | ||
9 | * | ||
10 | * This program is distributed in the hope that it will be useful, | ||
11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
13 | * GNU General Public License for more details. | ||
14 | * | ||
15 | * You should have received a copy of the GNU General Public License | ||
16 | * along with this program; if not, write to the Free Software | ||
17 | * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | ||
18 | * | ||
19 | *****************************************************************************/ | ||
20 | |||
21 | #include <linux/module.h> | ||
22 | #include <linux/kmod.h> | ||
23 | #include <linux/init.h> | ||
24 | #include <linux/netdevice.h> | ||
25 | #include <linux/etherdevice.h> | ||
26 | #include <linux/ethtool.h> | ||
27 | #include <linux/mii.h> | ||
28 | #include <linux/usb.h> | ||
29 | #include <linux/crc32.h> | ||
30 | #include <linux/usb/usbnet.h> | ||
31 | #include "smsc75xx.h" | ||
32 | |||
33 | #define SMSC_CHIPNAME "smsc75xx" | ||
34 | #define SMSC_DRIVER_VERSION "1.0.0" | ||
35 | #define HS_USB_PKT_SIZE (512) | ||
36 | #define FS_USB_PKT_SIZE (64) | ||
37 | #define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE) | ||
38 | #define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE) | ||
39 | #define DEFAULT_BULK_IN_DELAY (0x00002000) | ||
40 | #define MAX_SINGLE_PACKET_SIZE (9000) | ||
41 | #define LAN75XX_EEPROM_MAGIC (0x7500) | ||
42 | #define EEPROM_MAC_OFFSET (0x01) | ||
43 | #define DEFAULT_TX_CSUM_ENABLE (true) | ||
44 | #define DEFAULT_RX_CSUM_ENABLE (true) | ||
45 | #define DEFAULT_TSO_ENABLE (true) | ||
46 | #define SMSC75XX_INTERNAL_PHY_ID (1) | ||
47 | #define SMSC75XX_TX_OVERHEAD (8) | ||
48 | #define MAX_RX_FIFO_SIZE (20 * 1024) | ||
49 | #define MAX_TX_FIFO_SIZE (12 * 1024) | ||
50 | #define USB_VENDOR_ID_SMSC (0x0424) | ||
51 | #define USB_PRODUCT_ID_LAN7500 (0x7500) | ||
52 | #define USB_PRODUCT_ID_LAN7505 (0x7505) | ||
53 | |||
54 | #define check_warn(ret, fmt, args...) \ | ||
55 | ({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); }) | ||
56 | |||
57 | #define check_warn_return(ret, fmt, args...) \ | ||
58 | ({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); return ret; } }) | ||
59 | |||
60 | #define check_warn_goto_done(ret, fmt, args...) \ | ||
61 | ({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); goto done; } }) | ||
62 | |||
63 | struct smsc75xx_priv { | ||
64 | struct usbnet *dev; | ||
65 | u32 rfe_ctl; | ||
66 | u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN]; | ||
67 | bool use_rx_csum; | ||
68 | struct mutex dataport_mutex; | ||
69 | spinlock_t rfe_ctl_lock; | ||
70 | struct work_struct set_multicast; | ||
71 | }; | ||
72 | |||
73 | struct usb_context { | ||
74 | struct usb_ctrlrequest req; | ||
75 | struct usbnet *dev; | ||
76 | }; | ||
77 | |||
78 | static int turbo_mode = true; | ||
79 | module_param(turbo_mode, bool, 0644); | ||
80 | MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction"); | ||
81 | |||
82 | static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index, | ||
83 | u32 *data) | ||
84 | { | ||
85 | u32 *buf = kmalloc(4, GFP_KERNEL); | ||
86 | int ret; | ||
87 | |||
88 | BUG_ON(!dev); | ||
89 | |||
90 | if (!buf) | ||
91 | return -ENOMEM; | ||
92 | |||
93 | ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), | ||
94 | USB_VENDOR_REQUEST_READ_REGISTER, | ||
95 | USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, | ||
96 | 00, index, buf, 4, USB_CTRL_GET_TIMEOUT); | ||
97 | |||
98 | if (unlikely(ret < 0)) | ||
99 | netdev_warn(dev->net, | ||
100 | "Failed to read register index 0x%08x", index); | ||
101 | |||
102 | le32_to_cpus(buf); | ||
103 | *data = *buf; | ||
104 | kfree(buf); | ||
105 | |||
106 | return ret; | ||
107 | } | ||
108 | |||
109 | static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index, | ||
110 | u32 data) | ||
111 | { | ||
112 | u32 *buf = kmalloc(4, GFP_KERNEL); | ||
113 | int ret; | ||
114 | |||
115 | BUG_ON(!dev); | ||
116 | |||
117 | if (!buf) | ||
118 | return -ENOMEM; | ||
119 | |||
120 | *buf = data; | ||
121 | cpu_to_le32s(buf); | ||
122 | |||
123 | ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), | ||
124 | USB_VENDOR_REQUEST_WRITE_REGISTER, | ||
125 | USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, | ||
126 | 00, index, buf, 4, USB_CTRL_SET_TIMEOUT); | ||
127 | |||
128 | if (unlikely(ret < 0)) | ||
129 | netdev_warn(dev->net, | ||
130 | "Failed to write register index 0x%08x", index); | ||
131 | |||
132 | kfree(buf); | ||
133 | |||
134 | return ret; | ||
135 | } | ||
136 | |||
137 | /* Loop until the read is completed with timeout | ||
138 | * called with phy_mutex held */ | ||
139 | static int smsc75xx_phy_wait_not_busy(struct usbnet *dev) | ||
140 | { | ||
141 | unsigned long start_time = jiffies; | ||
142 | u32 val; | ||
143 | int ret; | ||
144 | |||
145 | do { | ||
146 | ret = smsc75xx_read_reg(dev, MII_ACCESS, &val); | ||
147 | check_warn_return(ret, "Error reading MII_ACCESS"); | ||
148 | |||
149 | if (!(val & MII_ACCESS_BUSY)) | ||
150 | return 0; | ||
151 | } while (!time_after(jiffies, start_time + HZ)); | ||
152 | |||
153 | return -EIO; | ||
154 | } | ||
155 | |||
156 | static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx) | ||
157 | { | ||
158 | struct usbnet *dev = netdev_priv(netdev); | ||
159 | u32 val, addr; | ||
160 | int ret; | ||
161 | |||
162 | mutex_lock(&dev->phy_mutex); | ||
163 | |||
164 | /* confirm MII not busy */ | ||
165 | ret = smsc75xx_phy_wait_not_busy(dev); | ||
166 | check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_read"); | ||
167 | |||
168 | /* set the address, index & direction (read from PHY) */ | ||
169 | phy_id &= dev->mii.phy_id_mask; | ||
170 | idx &= dev->mii.reg_num_mask; | ||
171 | addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) | ||
172 | | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) | ||
173 | | MII_ACCESS_READ; | ||
174 | ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); | ||
175 | check_warn_goto_done(ret, "Error writing MII_ACCESS"); | ||
176 | |||
177 | ret = smsc75xx_phy_wait_not_busy(dev); | ||
178 | check_warn_goto_done(ret, "Timed out reading MII reg %02X", idx); | ||
179 | |||
180 | ret = smsc75xx_read_reg(dev, MII_DATA, &val); | ||
181 | check_warn_goto_done(ret, "Error reading MII_DATA"); | ||
182 | |||
183 | ret = (u16)(val & 0xFFFF); | ||
184 | |||
185 | done: | ||
186 | mutex_unlock(&dev->phy_mutex); | ||
187 | return ret; | ||
188 | } | ||
189 | |||
190 | static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx, | ||
191 | int regval) | ||
192 | { | ||
193 | struct usbnet *dev = netdev_priv(netdev); | ||
194 | u32 val, addr; | ||
195 | int ret; | ||
196 | |||
197 | mutex_lock(&dev->phy_mutex); | ||
198 | |||
199 | /* confirm MII not busy */ | ||
200 | ret = smsc75xx_phy_wait_not_busy(dev); | ||
201 | check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_write"); | ||
202 | |||
203 | val = regval; | ||
204 | ret = smsc75xx_write_reg(dev, MII_DATA, val); | ||
205 | check_warn_goto_done(ret, "Error writing MII_DATA"); | ||
206 | |||
207 | /* set the address, index & direction (write to PHY) */ | ||
208 | phy_id &= dev->mii.phy_id_mask; | ||
209 | idx &= dev->mii.reg_num_mask; | ||
210 | addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) | ||
211 | | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) | ||
212 | | MII_ACCESS_WRITE; | ||
213 | ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); | ||
214 | check_warn_goto_done(ret, "Error writing MII_ACCESS"); | ||
215 | |||
216 | ret = smsc75xx_phy_wait_not_busy(dev); | ||
217 | check_warn_goto_done(ret, "Timed out writing MII reg %02X", idx); | ||
218 | |||
219 | done: | ||
220 | mutex_unlock(&dev->phy_mutex); | ||
221 | } | ||
222 | |||
223 | static int smsc75xx_wait_eeprom(struct usbnet *dev) | ||
224 | { | ||
225 | unsigned long start_time = jiffies; | ||
226 | u32 val; | ||
227 | int ret; | ||
228 | |||
229 | do { | ||
230 | ret = smsc75xx_read_reg(dev, E2P_CMD, &val); | ||
231 | check_warn_return(ret, "Error reading E2P_CMD"); | ||
232 | |||
233 | if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT)) | ||
234 | break; | ||
235 | udelay(40); | ||
236 | } while (!time_after(jiffies, start_time + HZ)); | ||
237 | |||
238 | if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) { | ||
239 | netdev_warn(dev->net, "EEPROM read operation timeout"); | ||
240 | return -EIO; | ||
241 | } | ||
242 | |||
243 | return 0; | ||
244 | } | ||
245 | |||
246 | static int smsc75xx_eeprom_confirm_not_busy(struct usbnet *dev) | ||
247 | { | ||
248 | unsigned long start_time = jiffies; | ||
249 | u32 val; | ||
250 | int ret; | ||
251 | |||
252 | do { | ||
253 | ret = smsc75xx_read_reg(dev, E2P_CMD, &val); | ||
254 | check_warn_return(ret, "Error reading E2P_CMD"); | ||
255 | |||
256 | if (!(val & E2P_CMD_BUSY)) | ||
257 | return 0; | ||
258 | |||
259 | udelay(40); | ||
260 | } while (!time_after(jiffies, start_time + HZ)); | ||
261 | |||
262 | netdev_warn(dev->net, "EEPROM is busy"); | ||
263 | return -EIO; | ||
264 | } | ||
265 | |||
266 | static int smsc75xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length, | ||
267 | u8 *data) | ||
268 | { | ||
269 | u32 val; | ||
270 | int i, ret; | ||
271 | |||
272 | BUG_ON(!dev); | ||
273 | BUG_ON(!data); | ||
274 | |||
275 | ret = smsc75xx_eeprom_confirm_not_busy(dev); | ||
276 | if (ret) | ||
277 | return ret; | ||
278 | |||
279 | for (i = 0; i < length; i++) { | ||
280 | val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR); | ||
281 | ret = smsc75xx_write_reg(dev, E2P_CMD, val); | ||
282 | check_warn_return(ret, "Error writing E2P_CMD"); | ||
283 | |||
284 | ret = smsc75xx_wait_eeprom(dev); | ||
285 | if (ret < 0) | ||
286 | return ret; | ||
287 | |||
288 | ret = smsc75xx_read_reg(dev, E2P_DATA, &val); | ||
289 | check_warn_return(ret, "Error reading E2P_DATA"); | ||
290 | |||
291 | data[i] = val & 0xFF; | ||
292 | offset++; | ||
293 | } | ||
294 | |||
295 | return 0; | ||
296 | } | ||
297 | |||
298 | static int smsc75xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length, | ||
299 | u8 *data) | ||
300 | { | ||
301 | u32 val; | ||
302 | int i, ret; | ||
303 | |||
304 | BUG_ON(!dev); | ||
305 | BUG_ON(!data); | ||
306 | |||
307 | ret = smsc75xx_eeprom_confirm_not_busy(dev); | ||
308 | if (ret) | ||
309 | return ret; | ||
310 | |||
311 | /* Issue write/erase enable command */ | ||
312 | val = E2P_CMD_BUSY | E2P_CMD_EWEN; | ||
313 | ret = smsc75xx_write_reg(dev, E2P_CMD, val); | ||
314 | check_warn_return(ret, "Error writing E2P_CMD"); | ||
315 | |||
316 | ret = smsc75xx_wait_eeprom(dev); | ||
317 | if (ret < 0) | ||
318 | return ret; | ||
319 | |||
320 | for (i = 0; i < length; i++) { | ||
321 | |||
322 | /* Fill data register */ | ||
323 | val = data[i]; | ||
324 | ret = smsc75xx_write_reg(dev, E2P_DATA, val); | ||
325 | check_warn_return(ret, "Error writing E2P_DATA"); | ||
326 | |||
327 | /* Send "write" command */ | ||
328 | val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR); | ||
329 | ret = smsc75xx_write_reg(dev, E2P_CMD, val); | ||
330 | check_warn_return(ret, "Error writing E2P_CMD"); | ||
331 | |||
332 | ret = smsc75xx_wait_eeprom(dev); | ||
333 | if (ret < 0) | ||
334 | return ret; | ||
335 | |||
336 | offset++; | ||
337 | } | ||
338 | |||
339 | return 0; | ||
340 | } | ||
341 | |||
342 | static int smsc75xx_dataport_wait_not_busy(struct usbnet *dev) | ||
343 | { | ||
344 | int i, ret; | ||
345 | |||
346 | for (i = 0; i < 100; i++) { | ||
347 | u32 dp_sel; | ||
348 | ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel); | ||
349 | check_warn_return(ret, "Error reading DP_SEL"); | ||
350 | |||
351 | if (dp_sel & DP_SEL_DPRDY) | ||
352 | return 0; | ||
353 | |||
354 | udelay(40); | ||
355 | } | ||
356 | |||
357 | netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out"); | ||
358 | |||
359 | return -EIO; | ||
360 | } | ||
361 | |||
362 | static int smsc75xx_dataport_write(struct usbnet *dev, u32 ram_select, u32 addr, | ||
363 | u32 length, u32 *buf) | ||
364 | { | ||
365 | struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); | ||
366 | u32 dp_sel; | ||
367 | int i, ret; | ||
368 | |||
369 | mutex_lock(&pdata->dataport_mutex); | ||
370 | |||
371 | ret = smsc75xx_dataport_wait_not_busy(dev); | ||
372 | check_warn_goto_done(ret, "smsc75xx_dataport_write busy on entry"); | ||
373 | |||
374 | ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel); | ||
375 | check_warn_goto_done(ret, "Error reading DP_SEL"); | ||
376 | |||
377 | dp_sel &= ~DP_SEL_RSEL; | ||
378 | dp_sel |= ram_select; | ||
379 | ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel); | ||
380 | check_warn_goto_done(ret, "Error writing DP_SEL"); | ||
381 | |||
382 | for (i = 0; i < length; i++) { | ||
383 | ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i); | ||
384 | check_warn_goto_done(ret, "Error writing DP_ADDR"); | ||
385 | |||
386 | ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]); | ||
387 | check_warn_goto_done(ret, "Error writing DP_DATA"); | ||
388 | |||
389 | ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE); | ||
390 | check_warn_goto_done(ret, "Error writing DP_CMD"); | ||
391 | |||
392 | ret = smsc75xx_dataport_wait_not_busy(dev); | ||
393 | check_warn_goto_done(ret, "smsc75xx_dataport_write timeout"); | ||
394 | } | ||
395 | |||
396 | done: | ||
397 | mutex_unlock(&pdata->dataport_mutex); | ||
398 | return ret; | ||
399 | } | ||
400 | |||
401 | /* returns hash bit number for given MAC address */ | ||
402 | static u32 smsc75xx_hash(char addr[ETH_ALEN]) | ||
403 | { | ||
404 | return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff; | ||
405 | } | ||
406 | |||
407 | static void smsc75xx_deferred_multicast_write(struct work_struct *param) | ||
408 | { | ||
409 | struct smsc75xx_priv *pdata = | ||
410 | container_of(param, struct smsc75xx_priv, set_multicast); | ||
411 | struct usbnet *dev = pdata->dev; | ||
412 | int ret; | ||
413 | |||
414 | netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x", | ||
415 | pdata->rfe_ctl); | ||
416 | |||
417 | smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN, | ||
418 | DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table); | ||
419 | |||
420 | ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl); | ||
421 | check_warn(ret, "Error writing RFE_CRL"); | ||
422 | } | ||
423 | |||
424 | static void smsc75xx_set_multicast(struct net_device *netdev) | ||
425 | { | ||
426 | struct usbnet *dev = netdev_priv(netdev); | ||
427 | struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); | ||
428 | unsigned long flags; | ||
429 | int i; | ||
430 | |||
431 | spin_lock_irqsave(&pdata->rfe_ctl_lock, flags); | ||
432 | |||
433 | pdata->rfe_ctl &= | ||
434 | ~(RFE_CTL_AU | RFE_CTL_AM | RFE_CTL_DPF | RFE_CTL_MHF); | ||
435 | pdata->rfe_ctl |= RFE_CTL_AB; | ||
436 | |||
437 | for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++) | ||
438 | pdata->multicast_hash_table[i] = 0; | ||
439 | |||
440 | if (dev->net->flags & IFF_PROMISC) { | ||
441 | netif_dbg(dev, drv, dev->net, "promiscuous mode enabled"); | ||
442 | pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU; | ||
443 | } else if (dev->net->flags & IFF_ALLMULTI) { | ||
444 | netif_dbg(dev, drv, dev->net, "receive all multicast enabled"); | ||
445 | pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF; | ||
446 | } else if (!netdev_mc_empty(dev->net)) { | ||
447 | struct dev_mc_list *mc_list; | ||
448 | |||
449 | netif_dbg(dev, drv, dev->net, "receive multicast hash filter"); | ||
450 | |||
451 | pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF; | ||
452 | |||
453 | netdev_for_each_mc_addr(mc_list, netdev) { | ||
454 | u32 bitnum = smsc75xx_hash(mc_list->dmi_addr); | ||
455 | pdata->multicast_hash_table[bitnum / 32] |= | ||
456 | (1 << (bitnum % 32)); | ||
457 | } | ||
458 | } else { | ||
459 | netif_dbg(dev, drv, dev->net, "receive own packets only"); | ||
460 | pdata->rfe_ctl |= RFE_CTL_DPF; | ||
461 | } | ||
462 | |||
463 | spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags); | ||
464 | |||
465 | /* defer register writes to a sleepable context */ | ||
466 | schedule_work(&pdata->set_multicast); | ||
467 | } | ||
468 | |||
469 | static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex, | ||
470 | u16 lcladv, u16 rmtadv) | ||
471 | { | ||
472 | u32 flow = 0, fct_flow = 0; | ||
473 | int ret; | ||
474 | |||
475 | if (duplex == DUPLEX_FULL) { | ||
476 | u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); | ||
477 | |||
478 | if (cap & FLOW_CTRL_TX) { | ||
479 | flow = (FLOW_TX_FCEN | 0xFFFF); | ||
480 | /* set fct_flow thresholds to 20% and 80% */ | ||
481 | fct_flow = (8 << 8) | 32; | ||
482 | } | ||
483 | |||
484 | if (cap & FLOW_CTRL_RX) | ||
485 | flow |= FLOW_RX_FCEN; | ||
486 | |||
487 | netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s", | ||
488 | (cap & FLOW_CTRL_RX ? "enabled" : "disabled"), | ||
489 | (cap & FLOW_CTRL_TX ? "enabled" : "disabled")); | ||
490 | } else { | ||
491 | netif_dbg(dev, link, dev->net, "half duplex"); | ||
492 | } | ||
493 | |||
494 | ret = smsc75xx_write_reg(dev, FLOW, flow); | ||
495 | check_warn_return(ret, "Error writing FLOW"); | ||
496 | |||
497 | ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow); | ||
498 | check_warn_return(ret, "Error writing FCT_FLOW"); | ||
499 | |||
500 | return 0; | ||
501 | } | ||
502 | |||
503 | static int smsc75xx_link_reset(struct usbnet *dev) | ||
504 | { | ||
505 | struct mii_if_info *mii = &dev->mii; | ||
506 | struct ethtool_cmd ecmd; | ||
507 | u16 lcladv, rmtadv; | ||
508 | int ret; | ||
509 | |||
510 | /* clear interrupt status */ | ||
511 | ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC); | ||
512 | check_warn_return(ret, "Error reading PHY_INT_SRC"); | ||
513 | |||
514 | ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); | ||
515 | check_warn_return(ret, "Error writing INT_STS"); | ||
516 | |||
517 | mii_check_media(mii, 1, 1); | ||
518 | mii_ethtool_gset(&dev->mii, &ecmd); | ||
519 | lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE); | ||
520 | rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA); | ||
521 | |||
522 | netif_dbg(dev, link, dev->net, "speed: %d duplex: %d lcladv: %04x" | ||
523 | " rmtadv: %04x", ecmd.speed, ecmd.duplex, lcladv, rmtadv); | ||
524 | |||
525 | return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv); | ||
526 | } | ||
527 | |||
528 | static void smsc75xx_status(struct usbnet *dev, struct urb *urb) | ||
529 | { | ||
530 | u32 intdata; | ||
531 | |||
532 | if (urb->actual_length != 4) { | ||
533 | netdev_warn(dev->net, | ||
534 | "unexpected urb length %d", urb->actual_length); | ||
535 | return; | ||
536 | } | ||
537 | |||
538 | memcpy(&intdata, urb->transfer_buffer, 4); | ||
539 | le32_to_cpus(&intdata); | ||
540 | |||
541 | netif_dbg(dev, link, dev->net, "intdata: 0x%08X", intdata); | ||
542 | |||
543 | if (intdata & INT_ENP_PHY_INT) | ||
544 | usbnet_defer_kevent(dev, EVENT_LINK_RESET); | ||
545 | else | ||
546 | netdev_warn(dev->net, | ||
547 | "unexpected interrupt, intdata=0x%08X", intdata); | ||
548 | } | ||
549 | |||
550 | /* Enable or disable Rx checksum offload engine */ | ||
551 | static int smsc75xx_set_rx_csum_offload(struct usbnet *dev) | ||
552 | { | ||
553 | struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); | ||
554 | unsigned long flags; | ||
555 | int ret; | ||
556 | |||
557 | spin_lock_irqsave(&pdata->rfe_ctl_lock, flags); | ||
558 | |||
559 | if (pdata->use_rx_csum) | ||
560 | pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM; | ||
561 | else | ||
562 | pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM); | ||
563 | |||
564 | spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags); | ||
565 | |||
566 | ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl); | ||
567 | check_warn_return(ret, "Error writing RFE_CTL"); | ||
568 | |||
569 | return 0; | ||
570 | } | ||
571 | |||
572 | static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net) | ||
573 | { | ||
574 | return MAX_EEPROM_SIZE; | ||
575 | } | ||
576 | |||
577 | static int smsc75xx_ethtool_get_eeprom(struct net_device *netdev, | ||
578 | struct ethtool_eeprom *ee, u8 *data) | ||
579 | { | ||
580 | struct usbnet *dev = netdev_priv(netdev); | ||
581 | |||
582 | ee->magic = LAN75XX_EEPROM_MAGIC; | ||
583 | |||
584 | return smsc75xx_read_eeprom(dev, ee->offset, ee->len, data); | ||
585 | } | ||
586 | |||
587 | static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev, | ||
588 | struct ethtool_eeprom *ee, u8 *data) | ||
589 | { | ||
590 | struct usbnet *dev = netdev_priv(netdev); | ||
591 | |||
592 | if (ee->magic != LAN75XX_EEPROM_MAGIC) { | ||
593 | netdev_warn(dev->net, | ||
594 | "EEPROM: magic value mismatch: 0x%x", ee->magic); | ||
595 | return -EINVAL; | ||
596 | } | ||
597 | |||
598 | return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data); | ||
599 | } | ||
600 | |||
601 | static u32 smsc75xx_ethtool_get_rx_csum(struct net_device *netdev) | ||
602 | { | ||
603 | struct usbnet *dev = netdev_priv(netdev); | ||
604 | struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); | ||
605 | |||
606 | return pdata->use_rx_csum; | ||
607 | } | ||
608 | |||
609 | static int smsc75xx_ethtool_set_rx_csum(struct net_device *netdev, u32 val) | ||
610 | { | ||
611 | struct usbnet *dev = netdev_priv(netdev); | ||
612 | struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); | ||
613 | |||
614 | pdata->use_rx_csum = !!val; | ||
615 | |||
616 | return smsc75xx_set_rx_csum_offload(dev); | ||
617 | } | ||
618 | |||
619 | static int smsc75xx_ethtool_set_tso(struct net_device *netdev, u32 data) | ||
620 | { | ||
621 | if (data) | ||
622 | netdev->features |= NETIF_F_TSO | NETIF_F_TSO6; | ||
623 | else | ||
624 | netdev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6); | ||
625 | |||
626 | return 0; | ||
627 | } | ||
628 | |||
629 | static const struct ethtool_ops smsc75xx_ethtool_ops = { | ||
630 | .get_link = usbnet_get_link, | ||
631 | .nway_reset = usbnet_nway_reset, | ||
632 | .get_drvinfo = usbnet_get_drvinfo, | ||
633 | .get_msglevel = usbnet_get_msglevel, | ||
634 | .set_msglevel = usbnet_set_msglevel, | ||
635 | .get_settings = usbnet_get_settings, | ||
636 | .set_settings = usbnet_set_settings, | ||
637 | .get_eeprom_len = smsc75xx_ethtool_get_eeprom_len, | ||
638 | .get_eeprom = smsc75xx_ethtool_get_eeprom, | ||
639 | .set_eeprom = smsc75xx_ethtool_set_eeprom, | ||
640 | .get_tx_csum = ethtool_op_get_tx_csum, | ||
641 | .set_tx_csum = ethtool_op_set_tx_hw_csum, | ||
642 | .get_rx_csum = smsc75xx_ethtool_get_rx_csum, | ||
643 | .set_rx_csum = smsc75xx_ethtool_set_rx_csum, | ||
644 | .get_tso = ethtool_op_get_tso, | ||
645 | .set_tso = smsc75xx_ethtool_set_tso, | ||
646 | }; | ||
647 | |||
648 | static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) | ||
649 | { | ||
650 | struct usbnet *dev = netdev_priv(netdev); | ||
651 | |||
652 | if (!netif_running(netdev)) | ||
653 | return -EINVAL; | ||
654 | |||
655 | return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); | ||
656 | } | ||
657 | |||
658 | static void smsc75xx_init_mac_address(struct usbnet *dev) | ||
659 | { | ||
660 | /* try reading mac address from EEPROM */ | ||
661 | if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN, | ||
662 | dev->net->dev_addr) == 0) { | ||
663 | if (is_valid_ether_addr(dev->net->dev_addr)) { | ||
664 | /* eeprom values are valid so use them */ | ||
665 | netif_dbg(dev, ifup, dev->net, | ||
666 | "MAC address read from EEPROM"); | ||
667 | return; | ||
668 | } | ||
669 | } | ||
670 | |||
671 | /* no eeprom, or eeprom values are invalid. generate random MAC */ | ||
672 | random_ether_addr(dev->net->dev_addr); | ||
673 | netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr"); | ||
674 | } | ||
675 | |||
676 | static int smsc75xx_set_mac_address(struct usbnet *dev) | ||
677 | { | ||
678 | u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 | | ||
679 | dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24; | ||
680 | u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8; | ||
681 | |||
682 | int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi); | ||
683 | check_warn_return(ret, "Failed to write RX_ADDRH: %d", ret); | ||
684 | |||
685 | ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo); | ||
686 | check_warn_return(ret, "Failed to write RX_ADDRL: %d", ret); | ||
687 | |||
688 | addr_hi |= ADDR_FILTX_FB_VALID; | ||
689 | ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi); | ||
690 | check_warn_return(ret, "Failed to write ADDR_FILTX: %d", ret); | ||
691 | |||
692 | ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo); | ||
693 | check_warn_return(ret, "Failed to write ADDR_FILTX+4: %d", ret); | ||
694 | |||
695 | return 0; | ||
696 | } | ||
697 | |||
698 | static int smsc75xx_phy_initialize(struct usbnet *dev) | ||
699 | { | ||
700 | int bmcr, timeout = 0; | ||
701 | |||
702 | /* Initialize MII structure */ | ||
703 | dev->mii.dev = dev->net; | ||
704 | dev->mii.mdio_read = smsc75xx_mdio_read; | ||
705 | dev->mii.mdio_write = smsc75xx_mdio_write; | ||
706 | dev->mii.phy_id_mask = 0x1f; | ||
707 | dev->mii.reg_num_mask = 0x1f; | ||
708 | dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID; | ||
709 | |||
710 | /* reset phy and wait for reset to complete */ | ||
711 | smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); | ||
712 | |||
713 | do { | ||
714 | msleep(10); | ||
715 | bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR); | ||
716 | check_warn_return(bmcr, "Error reading MII_BMCR"); | ||
717 | timeout++; | ||
718 | } while ((bmcr & MII_BMCR) && (timeout < 100)); | ||
719 | |||
720 | if (timeout >= 100) { | ||
721 | netdev_warn(dev->net, "timeout on PHY Reset"); | ||
722 | return -EIO; | ||
723 | } | ||
724 | |||
725 | smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, | ||
726 | ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | | ||
727 | ADVERTISE_PAUSE_ASYM); | ||
728 | |||
729 | /* read to clear */ | ||
730 | smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); | ||
731 | check_warn_return(bmcr, "Error reading PHY_INT_SRC"); | ||
732 | |||
733 | smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK, | ||
734 | PHY_INT_MASK_DEFAULT); | ||
735 | mii_nway_restart(&dev->mii); | ||
736 | |||
737 | netif_dbg(dev, ifup, dev->net, "phy initialised successfully"); | ||
738 | return 0; | ||
739 | } | ||
740 | |||
741 | static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size) | ||
742 | { | ||
743 | int ret = 0; | ||
744 | u32 buf; | ||
745 | bool rxenabled; | ||
746 | |||
747 | ret = smsc75xx_read_reg(dev, MAC_RX, &buf); | ||
748 | check_warn_return(ret, "Failed to read MAC_RX: %d", ret); | ||
749 | |||
750 | rxenabled = ((buf & MAC_RX_RXEN) != 0); | ||
751 | |||
752 | if (rxenabled) { | ||
753 | buf &= ~MAC_RX_RXEN; | ||
754 | ret = smsc75xx_write_reg(dev, MAC_RX, buf); | ||
755 | check_warn_return(ret, "Failed to write MAC_RX: %d", ret); | ||
756 | } | ||
757 | |||
758 | /* add 4 to size for FCS */ | ||
759 | buf &= ~MAC_RX_MAX_SIZE; | ||
760 | buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE); | ||
761 | |||
762 | ret = smsc75xx_write_reg(dev, MAC_RX, buf); | ||
763 | check_warn_return(ret, "Failed to write MAC_RX: %d", ret); | ||
764 | |||
765 | if (rxenabled) { | ||
766 | buf |= MAC_RX_RXEN; | ||
767 | ret = smsc75xx_write_reg(dev, MAC_RX, buf); | ||
768 | check_warn_return(ret, "Failed to write MAC_RX: %d", ret); | ||
769 | } | ||
770 | |||
771 | return 0; | ||
772 | } | ||
773 | |||
774 | static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu) | ||
775 | { | ||
776 | struct usbnet *dev = netdev_priv(netdev); | ||
777 | |||
778 | int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu); | ||
779 | check_warn_return(ret, "Failed to set mac rx frame length"); | ||
780 | |||
781 | return usbnet_change_mtu(netdev, new_mtu); | ||
782 | } | ||
783 | |||
784 | static int smsc75xx_reset(struct usbnet *dev) | ||
785 | { | ||
786 | struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); | ||
787 | u32 buf; | ||
788 | int ret = 0, timeout; | ||
789 | |||
790 | netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset"); | ||
791 | |||
792 | ret = smsc75xx_read_reg(dev, HW_CFG, &buf); | ||
793 | check_warn_return(ret, "Failed to read HW_CFG: %d", ret); | ||
794 | |||
795 | buf |= HW_CFG_LRST; | ||
796 | |||
797 | ret = smsc75xx_write_reg(dev, HW_CFG, buf); | ||
798 | check_warn_return(ret, "Failed to write HW_CFG: %d", ret); | ||
799 | |||
800 | timeout = 0; | ||
801 | do { | ||
802 | msleep(10); | ||
803 | ret = smsc75xx_read_reg(dev, HW_CFG, &buf); | ||
804 | check_warn_return(ret, "Failed to read HW_CFG: %d", ret); | ||
805 | timeout++; | ||
806 | } while ((buf & HW_CFG_LRST) && (timeout < 100)); | ||
807 | |||
808 | if (timeout >= 100) { | ||
809 | netdev_warn(dev->net, "timeout on completion of Lite Reset"); | ||
810 | return -EIO; | ||
811 | } | ||
812 | |||
813 | netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY"); | ||
814 | |||
815 | ret = smsc75xx_read_reg(dev, PMT_CTL, &buf); | ||
816 | check_warn_return(ret, "Failed to read PMT_CTL: %d", ret); | ||
817 | |||
818 | buf |= PMT_CTL_PHY_RST; | ||
819 | |||
820 | ret = smsc75xx_write_reg(dev, PMT_CTL, buf); | ||
821 | check_warn_return(ret, "Failed to write PMT_CTL: %d", ret); | ||
822 | |||
823 | timeout = 0; | ||
824 | do { | ||
825 | msleep(10); | ||
826 | ret = smsc75xx_read_reg(dev, PMT_CTL, &buf); | ||
827 | check_warn_return(ret, "Failed to read PMT_CTL: %d", ret); | ||
828 | timeout++; | ||
829 | } while ((buf & PMT_CTL_PHY_RST) && (timeout < 100)); | ||
830 | |||
831 | if (timeout >= 100) { | ||
832 | netdev_warn(dev->net, "timeout waiting for PHY Reset"); | ||
833 | return -EIO; | ||
834 | } | ||
835 | |||
836 | netif_dbg(dev, ifup, dev->net, "PHY reset complete"); | ||
837 | |||
838 | smsc75xx_init_mac_address(dev); | ||
839 | |||
840 | ret = smsc75xx_set_mac_address(dev); | ||
841 | check_warn_return(ret, "Failed to set mac address"); | ||
842 | |||
843 | netif_dbg(dev, ifup, dev->net, "MAC Address: %pM", dev->net->dev_addr); | ||
844 | |||
845 | ret = smsc75xx_read_reg(dev, HW_CFG, &buf); | ||
846 | check_warn_return(ret, "Failed to read HW_CFG: %d", ret); | ||
847 | |||
848 | netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x", buf); | ||
849 | |||
850 | buf |= HW_CFG_BIR; | ||
851 | |||
852 | ret = smsc75xx_write_reg(dev, HW_CFG, buf); | ||
853 | check_warn_return(ret, "Failed to write HW_CFG: %d", ret); | ||
854 | |||
855 | ret = smsc75xx_read_reg(dev, HW_CFG, &buf); | ||
856 | check_warn_return(ret, "Failed to read HW_CFG: %d", ret); | ||
857 | |||
858 | netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after " | ||
859 | "writing HW_CFG_BIR: 0x%08x", buf); | ||
860 | |||
861 | if (!turbo_mode) { | ||
862 | buf = 0; | ||
863 | dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE; | ||
864 | } else if (dev->udev->speed == USB_SPEED_HIGH) { | ||
865 | buf = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE; | ||
866 | dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE; | ||
867 | } else { | ||
868 | buf = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE; | ||
869 | dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE; | ||
870 | } | ||
871 | |||
872 | netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld", | ||
873 | (ulong)dev->rx_urb_size); | ||
874 | |||
875 | ret = smsc75xx_write_reg(dev, BURST_CAP, buf); | ||
876 | check_warn_return(ret, "Failed to write BURST_CAP: %d", ret); | ||
877 | |||
878 | ret = smsc75xx_read_reg(dev, BURST_CAP, &buf); | ||
879 | check_warn_return(ret, "Failed to read BURST_CAP: %d", ret); | ||
880 | |||
881 | netif_dbg(dev, ifup, dev->net, | ||
882 | "Read Value from BURST_CAP after writing: 0x%08x", buf); | ||
883 | |||
884 | ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY); | ||
885 | check_warn_return(ret, "Failed to write BULK_IN_DLY: %d", ret); | ||
886 | |||
887 | ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf); | ||
888 | check_warn_return(ret, "Failed to read BULK_IN_DLY: %d", ret); | ||
889 | |||
890 | netif_dbg(dev, ifup, dev->net, | ||
891 | "Read Value from BULK_IN_DLY after writing: 0x%08x", buf); | ||
892 | |||
893 | if (turbo_mode) { | ||
894 | ret = smsc75xx_read_reg(dev, HW_CFG, &buf); | ||
895 | check_warn_return(ret, "Failed to read HW_CFG: %d", ret); | ||
896 | |||
897 | netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf); | ||
898 | |||
899 | buf |= (HW_CFG_MEF | HW_CFG_BCE); | ||
900 | |||
901 | ret = smsc75xx_write_reg(dev, HW_CFG, buf); | ||
902 | check_warn_return(ret, "Failed to write HW_CFG: %d", ret); | ||
903 | |||
904 | ret = smsc75xx_read_reg(dev, HW_CFG, &buf); | ||
905 | check_warn_return(ret, "Failed to read HW_CFG: %d", ret); | ||
906 | |||
907 | netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf); | ||
908 | } | ||
909 | |||
910 | /* set FIFO sizes */ | ||
911 | buf = (MAX_RX_FIFO_SIZE - 512) / 512; | ||
912 | ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf); | ||
913 | check_warn_return(ret, "Failed to write FCT_RX_FIFO_END: %d", ret); | ||
914 | |||
915 | netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x", buf); | ||
916 | |||
917 | buf = (MAX_TX_FIFO_SIZE - 512) / 512; | ||
918 | ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf); | ||
919 | check_warn_return(ret, "Failed to write FCT_TX_FIFO_END: %d", ret); | ||
920 | |||
921 | netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x", buf); | ||
922 | |||
923 | ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); | ||
924 | check_warn_return(ret, "Failed to write INT_STS: %d", ret); | ||
925 | |||
926 | ret = smsc75xx_read_reg(dev, ID_REV, &buf); | ||
927 | check_warn_return(ret, "Failed to read ID_REV: %d", ret); | ||
928 | |||
929 | netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x", buf); | ||
930 | |||
931 | /* Configure GPIO pins as LED outputs */ | ||
932 | ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf); | ||
933 | check_warn_return(ret, "Failed to read LED_GPIO_CFG: %d", ret); | ||
934 | |||
935 | buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL); | ||
936 | buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL; | ||
937 | |||
938 | ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf); | ||
939 | check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d", ret); | ||
940 | |||
941 | ret = smsc75xx_write_reg(dev, FLOW, 0); | ||
942 | check_warn_return(ret, "Failed to write FLOW: %d", ret); | ||
943 | |||
944 | ret = smsc75xx_write_reg(dev, FCT_FLOW, 0); | ||
945 | check_warn_return(ret, "Failed to write FCT_FLOW: %d", ret); | ||
946 | |||
947 | /* Don't need rfe_ctl_lock during initialisation */ | ||
948 | ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl); | ||
949 | check_warn_return(ret, "Failed to read RFE_CTL: %d", ret); | ||
950 | |||
951 | pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF; | ||
952 | |||
953 | ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl); | ||
954 | check_warn_return(ret, "Failed to write RFE_CTL: %d", ret); | ||
955 | |||
956 | ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl); | ||
957 | check_warn_return(ret, "Failed to read RFE_CTL: %d", ret); | ||
958 | |||
959 | netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl); | ||
960 | |||
961 | /* Enable or disable checksum offload engines */ | ||
962 | ethtool_op_set_tx_hw_csum(dev->net, DEFAULT_TX_CSUM_ENABLE); | ||
963 | ret = smsc75xx_set_rx_csum_offload(dev); | ||
964 | check_warn_return(ret, "Failed to set rx csum offload: %d", ret); | ||
965 | |||
966 | smsc75xx_ethtool_set_tso(dev->net, DEFAULT_TSO_ENABLE); | ||
967 | |||
968 | smsc75xx_set_multicast(dev->net); | ||
969 | |||
970 | ret = smsc75xx_phy_initialize(dev); | ||
971 | check_warn_return(ret, "Failed to initialize PHY: %d", ret); | ||
972 | |||
973 | ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf); | ||
974 | check_warn_return(ret, "Failed to read INT_EP_CTL: %d", ret); | ||
975 | |||
976 | /* enable PHY interrupts */ | ||
977 | buf |= INT_ENP_PHY_INT; | ||
978 | |||
979 | ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf); | ||
980 | check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret); | ||
981 | |||
982 | ret = smsc75xx_read_reg(dev, MAC_TX, &buf); | ||
983 | check_warn_return(ret, "Failed to read MAC_TX: %d", ret); | ||
984 | |||
985 | buf |= MAC_TX_TXEN; | ||
986 | |||
987 | ret = smsc75xx_write_reg(dev, MAC_TX, buf); | ||
988 | check_warn_return(ret, "Failed to write MAC_TX: %d", ret); | ||
989 | |||
990 | netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x", buf); | ||
991 | |||
992 | ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf); | ||
993 | check_warn_return(ret, "Failed to read FCT_TX_CTL: %d", ret); | ||
994 | |||
995 | buf |= FCT_TX_CTL_EN; | ||
996 | |||
997 | ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf); | ||
998 | check_warn_return(ret, "Failed to write FCT_TX_CTL: %d", ret); | ||
999 | |||
1000 | netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x", buf); | ||
1001 | |||
1002 | ret = smsc75xx_set_rx_max_frame_length(dev, 1514); | ||
1003 | check_warn_return(ret, "Failed to set max rx frame length"); | ||
1004 | |||
1005 | ret = smsc75xx_read_reg(dev, MAC_RX, &buf); | ||
1006 | check_warn_return(ret, "Failed to read MAC_RX: %d", ret); | ||
1007 | |||
1008 | buf |= MAC_RX_RXEN; | ||
1009 | |||
1010 | ret = smsc75xx_write_reg(dev, MAC_RX, buf); | ||
1011 | check_warn_return(ret, "Failed to write MAC_RX: %d", ret); | ||
1012 | |||
1013 | netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x", buf); | ||
1014 | |||
1015 | ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf); | ||
1016 | check_warn_return(ret, "Failed to read FCT_RX_CTL: %d", ret); | ||
1017 | |||
1018 | buf |= FCT_RX_CTL_EN; | ||
1019 | |||
1020 | ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf); | ||
1021 | check_warn_return(ret, "Failed to write FCT_RX_CTL: %d", ret); | ||
1022 | |||
1023 | netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x", buf); | ||
1024 | |||
1025 | netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0"); | ||
1026 | return 0; | ||
1027 | } | ||
1028 | |||
1029 | static const struct net_device_ops smsc75xx_netdev_ops = { | ||
1030 | .ndo_open = usbnet_open, | ||
1031 | .ndo_stop = usbnet_stop, | ||
1032 | .ndo_start_xmit = usbnet_start_xmit, | ||
1033 | .ndo_tx_timeout = usbnet_tx_timeout, | ||
1034 | .ndo_change_mtu = smsc75xx_change_mtu, | ||
1035 | .ndo_set_mac_address = eth_mac_addr, | ||
1036 | .ndo_validate_addr = eth_validate_addr, | ||
1037 | .ndo_do_ioctl = smsc75xx_ioctl, | ||
1038 | .ndo_set_multicast_list = smsc75xx_set_multicast, | ||
1039 | }; | ||
1040 | |||
1041 | static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf) | ||
1042 | { | ||
1043 | struct smsc75xx_priv *pdata = NULL; | ||
1044 | int ret; | ||
1045 | |||
1046 | printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n"); | ||
1047 | |||
1048 | ret = usbnet_get_endpoints(dev, intf); | ||
1049 | check_warn_return(ret, "usbnet_get_endpoints failed: %d", ret); | ||
1050 | |||
1051 | dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv), | ||
1052 | GFP_KERNEL); | ||
1053 | |||
1054 | pdata = (struct smsc75xx_priv *)(dev->data[0]); | ||
1055 | if (!pdata) { | ||
1056 | netdev_warn(dev->net, "Unable to allocate smsc75xx_priv"); | ||
1057 | return -ENOMEM; | ||
1058 | } | ||
1059 | |||
1060 | pdata->dev = dev; | ||
1061 | |||
1062 | spin_lock_init(&pdata->rfe_ctl_lock); | ||
1063 | mutex_init(&pdata->dataport_mutex); | ||
1064 | |||
1065 | INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write); | ||
1066 | |||
1067 | pdata->use_rx_csum = DEFAULT_RX_CSUM_ENABLE; | ||
1068 | |||
1069 | /* We have to advertise SG otherwise TSO cannot be enabled */ | ||
1070 | dev->net->features |= NETIF_F_SG; | ||
1071 | |||
1072 | /* Init all registers */ | ||
1073 | ret = smsc75xx_reset(dev); | ||
1074 | |||
1075 | dev->net->netdev_ops = &smsc75xx_netdev_ops; | ||
1076 | dev->net->ethtool_ops = &smsc75xx_ethtool_ops; | ||
1077 | dev->net->flags |= IFF_MULTICAST; | ||
1078 | dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD; | ||
1079 | return 0; | ||
1080 | } | ||
1081 | |||
1082 | static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf) | ||
1083 | { | ||
1084 | struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); | ||
1085 | if (pdata) { | ||
1086 | netif_dbg(dev, ifdown, dev->net, "free pdata"); | ||
1087 | kfree(pdata); | ||
1088 | pdata = NULL; | ||
1089 | dev->data[0] = 0; | ||
1090 | } | ||
1091 | } | ||
1092 | |||
1093 | static void smsc75xx_rx_csum_offload(struct sk_buff *skb, u32 rx_cmd_a, | ||
1094 | u32 rx_cmd_b) | ||
1095 | { | ||
1096 | if (unlikely(rx_cmd_a & RX_CMD_A_LCSM)) { | ||
1097 | skb->ip_summed = CHECKSUM_NONE; | ||
1098 | } else { | ||
1099 | skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT)); | ||
1100 | skb->ip_summed = CHECKSUM_COMPLETE; | ||
1101 | } | ||
1102 | } | ||
1103 | |||
1104 | static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb) | ||
1105 | { | ||
1106 | struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); | ||
1107 | |||
1108 | while (skb->len > 0) { | ||
1109 | u32 rx_cmd_a, rx_cmd_b, align_count, size; | ||
1110 | struct sk_buff *ax_skb; | ||
1111 | unsigned char *packet; | ||
1112 | |||
1113 | memcpy(&rx_cmd_a, skb->data, sizeof(rx_cmd_a)); | ||
1114 | le32_to_cpus(&rx_cmd_a); | ||
1115 | skb_pull(skb, 4); | ||
1116 | |||
1117 | memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b)); | ||
1118 | le32_to_cpus(&rx_cmd_b); | ||
1119 | skb_pull(skb, 4 + NET_IP_ALIGN); | ||
1120 | |||
1121 | packet = skb->data; | ||
1122 | |||
1123 | /* get the packet length */ | ||
1124 | size = (rx_cmd_a & RX_CMD_A_LEN) - NET_IP_ALIGN; | ||
1125 | align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4; | ||
1126 | |||
1127 | if (unlikely(rx_cmd_a & RX_CMD_A_RED)) { | ||
1128 | netif_dbg(dev, rx_err, dev->net, | ||
1129 | "Error rx_cmd_a=0x%08x", rx_cmd_a); | ||
1130 | dev->net->stats.rx_errors++; | ||
1131 | dev->net->stats.rx_dropped++; | ||
1132 | |||
1133 | if (rx_cmd_a & RX_CMD_A_FCS) | ||
1134 | dev->net->stats.rx_crc_errors++; | ||
1135 | else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT)) | ||
1136 | dev->net->stats.rx_frame_errors++; | ||
1137 | } else { | ||
1138 | /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */ | ||
1139 | if (unlikely(size > (ETH_FRAME_LEN + 12))) { | ||
1140 | netif_dbg(dev, rx_err, dev->net, | ||
1141 | "size err rx_cmd_a=0x%08x", rx_cmd_a); | ||
1142 | return 0; | ||
1143 | } | ||
1144 | |||
1145 | /* last frame in this batch */ | ||
1146 | if (skb->len == size) { | ||
1147 | if (pdata->use_rx_csum) | ||
1148 | smsc75xx_rx_csum_offload(skb, rx_cmd_a, | ||
1149 | rx_cmd_b); | ||
1150 | else | ||
1151 | skb->ip_summed = CHECKSUM_NONE; | ||
1152 | |||
1153 | skb_trim(skb, skb->len - 4); /* remove fcs */ | ||
1154 | skb->truesize = size + sizeof(struct sk_buff); | ||
1155 | |||
1156 | return 1; | ||
1157 | } | ||
1158 | |||
1159 | ax_skb = skb_clone(skb, GFP_ATOMIC); | ||
1160 | if (unlikely(!ax_skb)) { | ||
1161 | netdev_warn(dev->net, "Error allocating skb"); | ||
1162 | return 0; | ||
1163 | } | ||
1164 | |||
1165 | ax_skb->len = size; | ||
1166 | ax_skb->data = packet; | ||
1167 | skb_set_tail_pointer(ax_skb, size); | ||
1168 | |||
1169 | if (pdata->use_rx_csum) | ||
1170 | smsc75xx_rx_csum_offload(ax_skb, rx_cmd_a, | ||
1171 | rx_cmd_b); | ||
1172 | else | ||
1173 | ax_skb->ip_summed = CHECKSUM_NONE; | ||
1174 | |||
1175 | skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */ | ||
1176 | ax_skb->truesize = size + sizeof(struct sk_buff); | ||
1177 | |||
1178 | usbnet_skb_return(dev, ax_skb); | ||
1179 | } | ||
1180 | |||
1181 | skb_pull(skb, size); | ||
1182 | |||
1183 | /* padding bytes before the next frame starts */ | ||
1184 | if (skb->len) | ||
1185 | skb_pull(skb, align_count); | ||
1186 | } | ||
1187 | |||
1188 | if (unlikely(skb->len < 0)) { | ||
1189 | netdev_warn(dev->net, "invalid rx length<0 %d", skb->len); | ||
1190 | return 0; | ||
1191 | } | ||
1192 | |||
1193 | return 1; | ||
1194 | } | ||
1195 | |||
1196 | static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev, | ||
1197 | struct sk_buff *skb, gfp_t flags) | ||
1198 | { | ||
1199 | u32 tx_cmd_a, tx_cmd_b; | ||
1200 | |||
1201 | skb_linearize(skb); | ||
1202 | |||
1203 | if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) { | ||
1204 | struct sk_buff *skb2 = | ||
1205 | skb_copy_expand(skb, SMSC75XX_TX_OVERHEAD, 0, flags); | ||
1206 | dev_kfree_skb_any(skb); | ||
1207 | skb = skb2; | ||
1208 | if (!skb) | ||
1209 | return NULL; | ||
1210 | } | ||
1211 | |||
1212 | tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS; | ||
1213 | |||
1214 | if (skb->ip_summed == CHECKSUM_PARTIAL) | ||
1215 | tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE; | ||
1216 | |||
1217 | if (skb_is_gso(skb)) { | ||
1218 | u16 mss = max(skb_shinfo(skb)->gso_size, TX_MSS_MIN); | ||
1219 | tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT) & TX_CMD_B_MSS; | ||
1220 | |||
1221 | tx_cmd_a |= TX_CMD_A_LSO; | ||
1222 | } else { | ||
1223 | tx_cmd_b = 0; | ||
1224 | } | ||
1225 | |||
1226 | skb_push(skb, 4); | ||
1227 | cpu_to_le32s(&tx_cmd_b); | ||
1228 | memcpy(skb->data, &tx_cmd_b, 4); | ||
1229 | |||
1230 | skb_push(skb, 4); | ||
1231 | cpu_to_le32s(&tx_cmd_a); | ||
1232 | memcpy(skb->data, &tx_cmd_a, 4); | ||
1233 | |||
1234 | return skb; | ||
1235 | } | ||
1236 | |||
1237 | static const struct driver_info smsc75xx_info = { | ||
1238 | .description = "smsc75xx USB 2.0 Gigabit Ethernet", | ||
1239 | .bind = smsc75xx_bind, | ||
1240 | .unbind = smsc75xx_unbind, | ||
1241 | .link_reset = smsc75xx_link_reset, | ||
1242 | .reset = smsc75xx_reset, | ||
1243 | .rx_fixup = smsc75xx_rx_fixup, | ||
1244 | .tx_fixup = smsc75xx_tx_fixup, | ||
1245 | .status = smsc75xx_status, | ||
1246 | .flags = FLAG_ETHER | FLAG_SEND_ZLP, | ||
1247 | }; | ||
1248 | |||
1249 | static const struct usb_device_id products[] = { | ||
1250 | { | ||
1251 | /* SMSC7500 USB Gigabit Ethernet Device */ | ||
1252 | USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7500), | ||
1253 | .driver_info = (unsigned long) &smsc75xx_info, | ||
1254 | }, | ||
1255 | { | ||
1256 | /* SMSC7500 USB Gigabit Ethernet Device */ | ||
1257 | USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7505), | ||
1258 | .driver_info = (unsigned long) &smsc75xx_info, | ||
1259 | }, | ||
1260 | { }, /* END */ | ||
1261 | }; | ||
1262 | MODULE_DEVICE_TABLE(usb, products); | ||
1263 | |||
1264 | static struct usb_driver smsc75xx_driver = { | ||
1265 | .name = SMSC_CHIPNAME, | ||
1266 | .id_table = products, | ||
1267 | .probe = usbnet_probe, | ||
1268 | .suspend = usbnet_suspend, | ||
1269 | .resume = usbnet_resume, | ||
1270 | .disconnect = usbnet_disconnect, | ||
1271 | }; | ||
1272 | |||
1273 | static int __init smsc75xx_init(void) | ||
1274 | { | ||
1275 | return usb_register(&smsc75xx_driver); | ||
1276 | } | ||
1277 | module_init(smsc75xx_init); | ||
1278 | |||
1279 | static void __exit smsc75xx_exit(void) | ||
1280 | { | ||
1281 | usb_deregister(&smsc75xx_driver); | ||
1282 | } | ||
1283 | module_exit(smsc75xx_exit); | ||
1284 | |||
1285 | MODULE_AUTHOR("Nancy Lin"); | ||
1286 | MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>"); | ||
1287 | MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices"); | ||
1288 | MODULE_LICENSE("GPL"); | ||