diff options
Diffstat (limited to 'drivers/net/usb/pegasus.h')
-rw-r--r-- | drivers/net/usb/pegasus.h | 307 |
1 files changed, 307 insertions, 0 deletions
diff --git a/drivers/net/usb/pegasus.h b/drivers/net/usb/pegasus.h new file mode 100644 index 000000000000..c7467823cd1c --- /dev/null +++ b/drivers/net/usb/pegasus.h | |||
@@ -0,0 +1,307 @@ | |||
1 | /* | ||
2 | * Copyright (c) 1999-2003 Petko Manolov - Petkan (petkan@users.sourceforge.net) | ||
3 | * | ||
4 | * This program is free software; you can redistribute it and/or modify | ||
5 | * it under the terms of the GNU General Public License version 2 as published | ||
6 | * by the Free Software Foundation. | ||
7 | */ | ||
8 | |||
9 | |||
10 | #ifndef PEGASUS_DEV | ||
11 | |||
12 | #define PEGASUS_II 0x80000000 | ||
13 | #define HAS_HOME_PNA 0x40000000 | ||
14 | |||
15 | #define PEGASUS_MTU 1536 | ||
16 | #define RX_SKBS 4 | ||
17 | |||
18 | #define EPROM_WRITE 0x01 | ||
19 | #define EPROM_READ 0x02 | ||
20 | #define EPROM_DONE 0x04 | ||
21 | #define EPROM_WR_ENABLE 0x10 | ||
22 | #define EPROM_LOAD 0x20 | ||
23 | |||
24 | #define PHY_DONE 0x80 | ||
25 | #define PHY_READ 0x40 | ||
26 | #define PHY_WRITE 0x20 | ||
27 | #define DEFAULT_GPIO_RESET 0x24 | ||
28 | #define DEFAULT_GPIO_SET 0x26 | ||
29 | |||
30 | #define PEGASUS_PRESENT 0x00000001 | ||
31 | #define PEGASUS_TX_BUSY 0x00000004 | ||
32 | #define PEGASUS_RX_BUSY 0x00000008 | ||
33 | #define CTRL_URB_RUNNING 0x00000010 | ||
34 | #define CTRL_URB_SLEEP 0x00000020 | ||
35 | #define PEGASUS_UNPLUG 0x00000040 | ||
36 | #define PEGASUS_RX_URB_FAIL 0x00000080 | ||
37 | #define ETH_REGS_CHANGE 0x40000000 | ||
38 | #define ETH_REGS_CHANGED 0x80000000 | ||
39 | |||
40 | #define RX_MULTICAST 2 | ||
41 | #define RX_PROMISCUOUS 4 | ||
42 | |||
43 | #define REG_TIMEOUT (HZ) | ||
44 | #define PEGASUS_TX_TIMEOUT (HZ*10) | ||
45 | |||
46 | #define TX_UNDERRUN 0x80 | ||
47 | #define EXCESSIVE_COL 0x40 | ||
48 | #define LATE_COL 0x20 | ||
49 | #define NO_CARRIER 0x10 | ||
50 | #define LOSS_CARRIER 0x08 | ||
51 | #define JABBER_TIMEOUT 0x04 | ||
52 | |||
53 | #define LINK_STATUS 0x01 | ||
54 | |||
55 | #define PEGASUS_REQT_READ 0xc0 | ||
56 | #define PEGASUS_REQT_WRITE 0x40 | ||
57 | #define PEGASUS_REQ_GET_REGS 0xf0 | ||
58 | #define PEGASUS_REQ_SET_REGS 0xf1 | ||
59 | #define PEGASUS_REQ_SET_REG PEGASUS_REQ_SET_REGS | ||
60 | |||
61 | enum pegasus_registers { | ||
62 | EthCtrl0 = 0, | ||
63 | EthCtrl1 = 1, | ||
64 | EthCtrl2 = 2, | ||
65 | EthID = 0x10, | ||
66 | Reg1d = 0x1d, | ||
67 | EpromOffset = 0x20, | ||
68 | EpromData = 0x21, /* 0x21 low, 0x22 high byte */ | ||
69 | EpromCtrl = 0x23, | ||
70 | PhyAddr = 0x25, | ||
71 | PhyData = 0x26, /* 0x26 low, 0x27 high byte */ | ||
72 | PhyCtrl = 0x28, | ||
73 | UsbStst = 0x2a, | ||
74 | EthTxStat0 = 0x2b, | ||
75 | EthTxStat1 = 0x2c, | ||
76 | EthRxStat = 0x2d, | ||
77 | WakeupControl = 0x78, | ||
78 | Reg7b = 0x7b, | ||
79 | Gpio0 = 0x7e, | ||
80 | Gpio1 = 0x7f, | ||
81 | Reg81 = 0x81, | ||
82 | }; | ||
83 | |||
84 | |||
85 | typedef struct pegasus { | ||
86 | struct usb_device *usb; | ||
87 | struct usb_interface *intf; | ||
88 | struct net_device *net; | ||
89 | struct net_device_stats stats; | ||
90 | struct mii_if_info mii; | ||
91 | unsigned flags; | ||
92 | unsigned features; | ||
93 | u32 msg_enable; | ||
94 | u32 wolopts; | ||
95 | int dev_index; | ||
96 | int intr_interval; | ||
97 | struct tasklet_struct rx_tl; | ||
98 | struct delayed_work carrier_check; | ||
99 | struct urb *ctrl_urb, *rx_urb, *tx_urb, *intr_urb; | ||
100 | struct sk_buff *rx_pool[RX_SKBS]; | ||
101 | struct sk_buff *rx_skb; | ||
102 | struct usb_ctrlrequest dr; | ||
103 | wait_queue_head_t ctrl_wait; | ||
104 | spinlock_t rx_pool_lock; | ||
105 | int chip; | ||
106 | unsigned char intr_buff[8]; | ||
107 | __u8 tx_buff[PEGASUS_MTU]; | ||
108 | __u8 eth_regs[4]; | ||
109 | __u8 phy; | ||
110 | __u8 gpio_res; | ||
111 | } pegasus_t; | ||
112 | |||
113 | |||
114 | struct usb_eth_dev { | ||
115 | char *name; | ||
116 | __u16 vendor; | ||
117 | __u16 device; | ||
118 | __u32 private; /* LSB is gpio reset value */ | ||
119 | }; | ||
120 | |||
121 | #define VENDOR_3COM 0x0506 | ||
122 | #define VENDOR_ABOCOM 0x07b8 | ||
123 | #define VENDOR_ACCTON 0x083a | ||
124 | #define VENDOR_ADMTEK 0x07a6 | ||
125 | #define VENDOR_AEILAB 0x3334 | ||
126 | #define VENDOR_ALLIEDTEL 0x07c9 | ||
127 | #define VENDOR_ATEN 0x0557 | ||
128 | #define VENDOR_BELKIN 0x050d | ||
129 | #define VENDOR_BILLIONTON 0x08dd | ||
130 | #define VENDOR_COMPAQ 0x049f | ||
131 | #define VENDOR_COREGA 0x07aa | ||
132 | #define VENDOR_DLINK 0x2001 | ||
133 | #define VENDOR_ELCON 0x0db7 | ||
134 | #define VENDOR_ELECOM 0x056e | ||
135 | #define VENDOR_ELSA 0x05cc | ||
136 | #define VENDOR_GIGABYTE 0x1044 | ||
137 | #define VENDOR_HAWKING 0x0e66 | ||
138 | #define VENDOR_HP 0x03f0 | ||
139 | #define VENDOR_IODATA 0x04bb | ||
140 | #define VENDOR_KINGSTON 0x0951 | ||
141 | #define VENDOR_LANEED 0x056e | ||
142 | #define VENDOR_LINKSYS 0x066b | ||
143 | #define VENDOR_LINKSYS2 0x077b | ||
144 | #define VENDOR_MELCO 0x0411 | ||
145 | #define VENDOR_MICROSOFT 0x045e | ||
146 | #define VENDOR_MOBILITY 0x1342 | ||
147 | #define VENDOR_NETGEAR 0x0846 | ||
148 | #define VENDOR_OCT 0x0b39 | ||
149 | #define VENDOR_SMARTBRIDGES 0x08d1 | ||
150 | #define VENDOR_SMC 0x0707 | ||
151 | #define VENDOR_SOHOWARE 0x15e8 | ||
152 | #define VENDOR_SIEMENS 0x067c | ||
153 | |||
154 | |||
155 | #else /* PEGASUS_DEV */ | ||
156 | |||
157 | PEGASUS_DEV( "3Com USB Ethernet 3C460B", VENDOR_3COM, 0x4601, | ||
158 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
159 | PEGASUS_DEV( "ATEN USB Ethernet UC-110T", VENDOR_ATEN, 0x2007, | ||
160 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
161 | PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x110c, | ||
162 | DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) | ||
163 | PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4104, | ||
164 | DEFAULT_GPIO_RESET | HAS_HOME_PNA ) | ||
165 | PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4004, | ||
166 | DEFAULT_GPIO_RESET | HAS_HOME_PNA ) | ||
167 | PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4007, | ||
168 | DEFAULT_GPIO_RESET | HAS_HOME_PNA ) | ||
169 | PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4102, | ||
170 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
171 | PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4002, | ||
172 | DEFAULT_GPIO_RESET ) | ||
173 | PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400b, | ||
174 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
175 | PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c, | ||
176 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
177 | PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1, | ||
178 | DEFAULT_GPIO_RESET ) | ||
179 | PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c, | ||
180 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
181 | PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046, | ||
182 | DEFAULT_GPIO_RESET ) | ||
183 | PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046, | ||
184 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
185 | PEGASUS_DEV( "Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004, | ||
186 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
187 | PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet", | ||
188 | VENDOR_ADMTEK, 0x8511, | ||
189 | DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) | ||
190 | PEGASUS_DEV( "ADMtek ADM8513 \"Pegasus II\" USB Ethernet", | ||
191 | VENDOR_ADMTEK, 0x8513, | ||
192 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
193 | PEGASUS_DEV( "ADMtek ADM8515 \"Pegasus II\" USB-2.0 Ethernet", | ||
194 | VENDOR_ADMTEK, 0x8515, | ||
195 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
196 | PEGASUS_DEV( "ADMtek AN986 \"Pegasus\" USB Ethernet (evaluation board)", | ||
197 | VENDOR_ADMTEK, 0x0986, | ||
198 | DEFAULT_GPIO_RESET | HAS_HOME_PNA ) | ||
199 | PEGASUS_DEV( "AN986A USB MAC", VENDOR_ADMTEK, 1986, | ||
200 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
201 | PEGASUS_DEV( "AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701, | ||
202 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
203 | PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100, | ||
204 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
205 | PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, | ||
206 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
207 | PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986, | ||
208 | DEFAULT_GPIO_RESET ) | ||
209 | PEGASUS_DEV( "Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987, | ||
210 | DEFAULT_GPIO_RESET | HAS_HOME_PNA ) | ||
211 | PEGASUS_DEV( "iPAQ Networking 10/100 USB", VENDOR_COMPAQ, 0x8511, | ||
212 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
213 | PEGASUS_DEV( "Billionton USBEL-100", VENDOR_BILLIONTON, 0x0988, | ||
214 | DEFAULT_GPIO_RESET ) | ||
215 | PEGASUS_DEV( "Billionton USBE-100", VENDOR_BILLIONTON, 0x8511, | ||
216 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
217 | PEGASUS_DEV( "Corega FEther USB-TX", VENDOR_COREGA, 0x0004, | ||
218 | DEFAULT_GPIO_RESET ) | ||
219 | PEGASUS_DEV( "Corega FEther USB-TXS", VENDOR_COREGA, 0x000d, | ||
220 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
221 | PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4001, | ||
222 | DEFAULT_GPIO_RESET ) | ||
223 | PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4002, | ||
224 | DEFAULT_GPIO_RESET ) | ||
225 | PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4102, | ||
226 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
227 | PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x400b, | ||
228 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
229 | PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x200c, | ||
230 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
231 | PEGASUS_DEV( "D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003, | ||
232 | DEFAULT_GPIO_RESET | HAS_HOME_PNA ) | ||
233 | PEGASUS_DEV( "D-Link DSB-650", VENDOR_DLINK, 0xabc1, | ||
234 | DEFAULT_GPIO_RESET ) | ||
235 | PEGASUS_DEV( "GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002, | ||
236 | DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) | ||
237 | PEGASUS_DEV( "ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM, 0x4010, | ||
238 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
239 | PEGASUS_DEV( "EasiDock Ethernet", VENDOR_MOBILITY, 0x0304, | ||
240 | DEFAULT_GPIO_RESET ) | ||
241 | PEGASUS_DEV( "Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000, | ||
242 | DEFAULT_GPIO_RESET ) | ||
243 | PEGASUS_DEV( "GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002, | ||
244 | DEFAULT_GPIO_RESET ) | ||
245 | PEGASUS_DEV( "Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c, | ||
246 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
247 | PEGASUS_DEV( "HP hn210c Ethernet USB", VENDOR_HP, 0x811c, | ||
248 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
249 | PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904, | ||
250 | DEFAULT_GPIO_RESET ) | ||
251 | PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913, | ||
252 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
253 | PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a, | ||
254 | DEFAULT_GPIO_RESET) | ||
255 | PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002, | ||
256 | DEFAULT_GPIO_RESET ) | ||
257 | PEGASUS_DEV( "LANEED USB Ethernet LD-USBL/TX", VENDOR_LANEED, 0x4005, | ||
258 | DEFAULT_GPIO_RESET | PEGASUS_II) | ||
259 | PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b, | ||
260 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
261 | PEGASUS_DEV( "LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1, | ||
262 | DEFAULT_GPIO_RESET ) | ||
263 | PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c, | ||
264 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
265 | PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x2202, | ||
266 | DEFAULT_GPIO_RESET ) | ||
267 | PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2203, | ||
268 | DEFAULT_GPIO_RESET ) | ||
269 | PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2204, | ||
270 | DEFAULT_GPIO_RESET | HAS_HOME_PNA ) | ||
271 | PEGASUS_DEV( "Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206, | ||
272 | DEFAULT_GPIO_RESET | PEGASUS_II) | ||
273 | PEGASUS_DEV( "Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4, | ||
274 | DEFAULT_GPIO_RESET ) | ||
275 | PEGASUS_DEV( "Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b, | ||
276 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
277 | PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x200c, | ||
278 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
279 | PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001, | ||
280 | DEFAULT_GPIO_RESET ) | ||
281 | PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005, | ||
282 | DEFAULT_GPIO_RESET ) | ||
283 | PEGASUS_DEV( "MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009, | ||
284 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
285 | PEGASUS_DEV( "Microsoft MN-110", VENDOR_MICROSOFT, 0x007a, | ||
286 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
287 | PEGASUS_DEV( "NETGEAR FA101", VENDOR_NETGEAR, 0x1020, | ||
288 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
289 | PEGASUS_DEV( "OCT Inc.", VENDOR_OCT, 0x0109, | ||
290 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
291 | PEGASUS_DEV( "OCT USB TO Ethernet", VENDOR_OCT, 0x0901, | ||
292 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
293 | PEGASUS_DEV( "smartNIC 2 PnP Adapter", VENDOR_SMARTBRIDGES, 0x0003, | ||
294 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
295 | PEGASUS_DEV( "SMC 202 USB Ethernet", VENDOR_SMC, 0x0200, | ||
296 | DEFAULT_GPIO_RESET ) | ||
297 | PEGASUS_DEV( "SMC 2206 USB Ethernet", VENDOR_SMC, 0x0201, | ||
298 | DEFAULT_GPIO_RESET | PEGASUS_II) | ||
299 | PEGASUS_DEV( "SOHOware NUB100 Ethernet", VENDOR_SOHOWARE, 0x9100, | ||
300 | DEFAULT_GPIO_RESET ) | ||
301 | PEGASUS_DEV( "SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110, | ||
302 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
303 | PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001, | ||
304 | DEFAULT_GPIO_RESET | PEGASUS_II ) | ||
305 | |||
306 | |||
307 | #endif /* PEGASUS_DEV */ | ||