1 files changed, 155 insertions, 24 deletions

diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index 49800b25907d..d21991ee88c4 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -3,10 +3,9 @@
  *
  * This file could be shared with other drivers.
  *
- * (c) 2002, Benjamin Herrenscmidt (benh@kernel.crashing.org)
+ * (c) 2002-2007, Benjamin Herrenscmidt (benh@kernel.crashing.org)
  *
  * TODO:
- *  - Implement WOL
  *  - Add support for PHYs that provide an IRQ line
  *  - Eventually moved the entire polling state machine in
  *    there (out of the eth driver), so that it can easily be
@@ -152,6 +151,44 @@ static int bcm5221_suspend(struct mii_phy* phy)
         return 0;
 }
 
+static int bcm5241_init(struct mii_phy* phy)
+{
+        u16 data;
+
+        data = phy_read(phy, MII_BCM5221_TEST);
+        phy_write(phy, MII_BCM5221_TEST,
+                data | MII_BCM5221_TEST_ENABLE_SHADOWS);
+
+        data = phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
+        phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
+                data | MII_BCM5221_SHDOW_AUX_STAT2_APD);
+
+        data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+        phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+                data & ~MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);
+
+        data = phy_read(phy, MII_BCM5221_TEST);
+        phy_write(phy, MII_BCM5221_TEST,
+                data & ~MII_BCM5221_TEST_ENABLE_SHADOWS);
+
+        return 0;
+}
+
+static int bcm5241_suspend(struct mii_phy* phy)
+{
+        u16 data;
+
+        data = phy_read(phy, MII_BCM5221_TEST);
+        phy_write(phy, MII_BCM5221_TEST,
+                data | MII_BCM5221_TEST_ENABLE_SHADOWS);
+
+        data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+        phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+                  data | MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);
+
+        return 0;
+}
+
 static int bcm5400_init(struct mii_phy* phy)
 {
         u16 data;
@@ -373,6 +410,10 @@ static int bcm54xx_setup_aneg(struct mii_phy *phy, u32 advertise)
                 adv |= ADVERTISE_100HALF;
         if (advertise & ADVERTISED_100baseT_Full)
                 adv |= ADVERTISE_100FULL;
+        if (advertise & ADVERTISED_Pause)
+                adv |= ADVERTISE_PAUSE_CAP;
+        if (advertise & ADVERTISED_Asym_Pause)
+                adv |= ADVERTISE_PAUSE_ASYM;
         phy_write(phy, MII_ADVERTISE, adv);
 
         /* Setup 1000BT advertise */
@@ -436,12 +477,15 @@ static int bcm54xx_read_link(struct mii_phy *phy)
                 val = phy_read(phy, MII_BCM5400_AUXSTATUS);
                 link_mode = ((val & MII_BCM5400_AUXSTATUS_LINKMODE_MASK) >>
                              MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT);
-                phy->duplex = phy_BCM5400_link_table[link_mode][0] ? DUPLEX_FULL : DUPLEX_HALF;
+                phy->duplex = phy_BCM5400_link_table[link_mode][0] ?
+                        DUPLEX_FULL : DUPLEX_HALF;
                 phy->speed = phy_BCM5400_link_table[link_mode][2] ?
                                 SPEED_1000 :
-                                (phy_BCM5400_link_table[link_mode][1] ? SPEED_100 : SPEED_10);
+                                (phy_BCM5400_link_table[link_mode][1] ?
+                                 SPEED_100 : SPEED_10);
                 val = phy_read(phy, MII_LPA);
-                phy->pause = ((val & LPA_PAUSE) != 0);
+                phy->pause = (phy->duplex == DUPLEX_FULL) &&
+                        ((val & LPA_PAUSE) != 0);
         }
         /* On non-aneg, we assume what we put in BMCR is the speed,
          * though magic-aneg shouldn't prevent this case from occurring
@@ -450,6 +494,28 @@ static int bcm54xx_read_link(struct mii_phy *phy)
         return 0;
 }
 
+static int marvell88e1111_init(struct mii_phy* phy)
+{
+        u16 rev;
+
+        /* magic init sequence for rev 0 */
+        rev = phy_read(phy, MII_PHYSID2) & 0x000f;
+        if (rev == 0) {
+                phy_write(phy, 0x1d, 0x000a);
+                phy_write(phy, 0x1e, 0x0821);
+
+                phy_write(phy, 0x1d, 0x0006);
+                phy_write(phy, 0x1e, 0x8600);
+
+                phy_write(phy, 0x1d, 0x000b);
+                phy_write(phy, 0x1e, 0x0100);
+
+                phy_write(phy, 0x1d, 0x0004);
+                phy_write(phy, 0x1e, 0x4850);
+        }
+        return 0;
+}
+
 static int marvell_setup_aneg(struct mii_phy *phy, u32 advertise)
 {
         u16 ctl, adv;
@@ -471,6 +537,10 @@ static int marvell_setup_aneg(struct mii_phy *phy, u32 advertise)
                 adv |= ADVERTISE_100HALF;
         if (advertise & ADVERTISED_100baseT_Full)
                 adv |= ADVERTISE_100FULL;
+        if (advertise & ADVERTISED_Pause)
+                adv |= ADVERTISE_PAUSE_CAP;
+        if (advertise & ADVERTISED_Asym_Pause)
+                adv |= ADVERTISE_PAUSE_ASYM;
         phy_write(phy, MII_ADVERTISE, adv);
 
         /* Setup 1000BT advertise & enable crossover detect
@@ -549,7 +619,7 @@ static int marvell_setup_forced(struct mii_phy *phy, int speed, int fd)
 
 static int marvell_read_link(struct mii_phy *phy)
 {
-        u16 status;
+        u16 status, pmask;
 
         if (phy->autoneg) {
                 status = phy_read(phy, MII_M1011_PHY_SPEC_STATUS);
@@ -565,7 +635,9 @@ static int marvell_read_link(struct mii_phy *phy)
                         phy->duplex = DUPLEX_FULL;
                 else
                         phy->duplex = DUPLEX_HALF;
-                phy->pause = 0; /* XXX Check against spec ! */
+                pmask = MII_M1011_PHY_SPEC_STATUS_TX_PAUSE |
+                        MII_M1011_PHY_SPEC_STATUS_RX_PAUSE;
+                phy->pause = (status & pmask) == pmask;
         }
         /* On non-aneg, we assume what we put in BMCR is the speed,
          * though magic-aneg shouldn't prevent this case from occurring
@@ -595,6 +667,10 @@ static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
                 adv |= ADVERTISE_100HALF;
         if (advertise & ADVERTISED_100baseT_Full)
                 adv |= ADVERTISE_100FULL;
+        if (advertise & ADVERTISED_Pause)
+                adv |= ADVERTISE_PAUSE_CAP;
+        if (advertise & ADVERTISED_Asym_Pause)
+                adv |= ADVERTISE_PAUSE_ASYM;
         phy_write(phy, MII_ADVERTISE, adv);
 
         /* Start/Restart aneg */
@@ -666,7 +742,8 @@ static int genmii_read_link(struct mii_phy *phy)
                         phy->speed = SPEED_100;
                 else
                         phy->speed = SPEED_10;
-                phy->pause = 0;
+                phy->pause = (phy->duplex == DUPLEX_FULL) &&
+                        ((lpa & LPA_PAUSE) != 0);
         }
         /* On non-aneg, we assume what we put in BMCR is the speed,
          * though magic-aneg shouldn't prevent this case from occurring
@@ -676,11 +753,19 @@ static int genmii_read_link(struct mii_phy *phy)
 }
 
 
-#define MII_BASIC_FEATURES      (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
-                                 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
-                                 SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII)
-#define MII_GBIT_FEATURES       (MII_BASIC_FEATURES | \
-                                 SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
+#define MII_BASIC_FEATURES \
+        (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |      \
+         SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |    \
+         SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |     \
+         SUPPORTED_Pause)
+
+/* On gigabit capable PHYs, we advertise Pause support but not asym pause
+ * support for now as I'm not sure it's supported and Darwin doesn't do
+ * it neither. --BenH.
+ */
+#define MII_GBIT_FEATURES \
+        (MII_BASIC_FEATURES |   \
+         SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
 
 /* Broadcom BCM 5201 */
 static struct mii_phy_ops bcm5201_phy_ops = {
@@ -720,6 +805,24 @@ static struct mii_phy_def bcm5221_phy_def = {
         .ops            = &bcm5221_phy_ops
 };
 
+/* Broadcom BCM 5241 */
+static struct mii_phy_ops bcm5241_phy_ops = {
+        .suspend        = bcm5241_suspend,
+        .init           = bcm5241_init,
+        .setup_aneg     = genmii_setup_aneg,
+        .setup_forced   = genmii_setup_forced,
+        .poll_link      = genmii_poll_link,
+        .read_link      = genmii_read_link,
+};
+static struct mii_phy_def bcm5241_phy_def = {
+        .phy_id         = 0x0143bc30,
+        .phy_id_mask    = 0xfffffff0,
+        .name           = "BCM5241",
+        .features       = MII_BASIC_FEATURES,
+        .magic_aneg     = 1,
+        .ops            = &bcm5241_phy_ops
+};
+
 /* Broadcom BCM 5400 */
 static struct mii_phy_ops bcm5400_phy_ops = {
         .init           = bcm5400_init,
@@ -854,11 +957,8 @@ static struct mii_phy_def bcm5462V_phy_def = {
         .ops            = &bcm5462V_phy_ops
 };
 
-/* Marvell 88E1101 (Apple seem to deal with 2 different revs,
- * I masked out the 8 last bits to get both, but some specs
- * would be useful here) --BenH.
- */
-static struct mii_phy_ops marvell_phy_ops = {
+/* Marvell 88E1101 amd 88E1111 */
+static struct mii_phy_ops marvell88e1101_phy_ops = {
         .suspend        = generic_suspend,
         .setup_aneg     = marvell_setup_aneg,
         .setup_forced   = marvell_setup_forced,
@@ -866,13 +966,41 @@ static struct mii_phy_ops marvell_phy_ops = {
         .read_link      = marvell_read_link
 };
 
-static struct mii_phy_def marvell_phy_def = {
-        .phy_id         = 0x01410c00,
-        .phy_id_mask    = 0xffffff00,
-        .name           = "Marvell 88E1101",
+static struct mii_phy_ops marvell88e1111_phy_ops = {
+        .init           = marvell88e1111_init,
+        .suspend        = generic_suspend,
+        .setup_aneg     = marvell_setup_aneg,
+        .setup_forced   = marvell_setup_forced,
+        .poll_link      = genmii_poll_link,
+        .read_link      = marvell_read_link
+};
+
+/* two revs in darwin for the 88e1101 ... I could use a datasheet
+ * to get the proper names...
+ */
+static struct mii_phy_def marvell88e1101v1_phy_def = {
+        .phy_id         = 0x01410c20,
+        .phy_id_mask    = 0xfffffff0,
+        .name           = "Marvell 88E1101v1",
+        .features       = MII_GBIT_FEATURES,
+        .magic_aneg     = 1,
+        .ops            = &marvell88e1101_phy_ops
+};
+static struct mii_phy_def marvell88e1101v2_phy_def = {
+        .phy_id         = 0x01410c60,
+        .phy_id_mask    = 0xfffffff0,
+        .name           = "Marvell 88E1101v2",
+        .features       = MII_GBIT_FEATURES,
+        .magic_aneg     = 1,
+        .ops            = &marvell88e1101_phy_ops
+};
+static struct mii_phy_def marvell88e1111_phy_def = {
+        .phy_id         = 0x01410cc0,
+        .phy_id_mask    = 0xfffffff0,
+        .name           = "Marvell 88E1111",
         .features       = MII_GBIT_FEATURES,
         .magic_aneg     = 1,
-        .ops            = &marvell_phy_ops
+        .ops            = &marvell88e1111_phy_ops
 };
 
 /* Generic implementation for most 10/100 PHYs */
@@ -895,6 +1023,7 @@ static struct mii_phy_def genmii_phy_def = {
 static struct mii_phy_def* mii_phy_table[] = {
         &bcm5201_phy_def,
         &bcm5221_phy_def,
+        &bcm5241_phy_def,
         &bcm5400_phy_def,
         &bcm5401_phy_def,
         &bcm5411_phy_def,
@@ -902,7 +1031,9 @@ static struct mii_phy_def* mii_phy_table[] = {
         &bcm5421k2_phy_def,
         &bcm5461_phy_def,
         &bcm5462V_phy_def,
-        &marvell_phy_def,
+        &marvell88e1101v1_phy_def,
+        &marvell88e1101v2_phy_def,
+        &marvell88e1111_phy_def,
         &genmii_phy_def,
         NULL
 };