1 files changed, 22 insertions, 0 deletions

diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index f18f8752118e..3d4f1903d62c 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1850,6 +1850,28 @@ enum {
 
 /*      GPHY_CTRL               32 bit  GPHY Control Reg (YUKON only) */
 enum {
+        GPC_TX_PAUSE    = 1<<30, /* Tx pause enabled (ro) */
+        GPC_RX_PAUSE    = 1<<29, /* Rx pause enabled (ro) */
+        GPC_SPEED       = 3<<27, /* PHY speed (ro) */
+        GPC_LINK        = 1<<26, /* Link up (ro) */
+        GPC_DUPLEX      = 1<<25, /* Duplex (ro) */
+        GPC_CLOCK       = 1<<24, /* 125Mhz clock stable (ro) */
+
+        GPC_PDOWN       = 1<<23, /* Internal regulator 2.5 power down */
+        GPC_TSTMODE     = 1<<22, /* Test mode */
+        GPC_REG18       = 1<<21, /* Reg18 Power down */
+        GPC_REG12SEL    = 3<<19, /* Reg12 power setting */
+        GPC_REG18SEL    = 3<<17, /* Reg18 power setting */
+        GPC_SPILOCK     = 1<<16, /* SPI lock (ASF) */
+
+        GPC_LEDMUX      = 3<<14, /* LED Mux */
+        GPC_INTPOL      = 1<<13, /* Interrupt polarity */
+        GPC_DETECT      = 1<<12, /* Energy detect */
+        GPC_1000HD      = 1<<11, /* Enable 1000Mbit HD */
+        GPC_SLAVE       = 1<<10, /* Slave mode */
+        GPC_PAUSE       = 1<<9, /* Pause enable */
+        GPC_LEDCTL      = 3<<6, /* GPHY Leds */
+
         GPC_RST_CLR     = 1<<1, /* Clear GPHY Reset */
         GPC_RST_SET     = 1<<0, /* Set   GPHY Reset */
 };