1 files changed, 104 insertions, 69 deletions

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index bfeba5b9cd7a..ca8160d68229 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -195,11 +195,11 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
         pr_debug("sky2_set_power_state %d\n", state);
         sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 
-        pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_PMC, &power_control);
+        power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC);
         vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
                 (power_control & PCI_PM_CAP_PME_D3cold);
 
-        pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_CTRL, &power_control);
+        power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
 
         power_control |= PCI_PM_CTRL_PME_STATUS;
         power_control &= ~(PCI_PM_CTRL_STATE_MASK);
@@ -223,7 +223,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
                         sky2_write8(hw, B2_Y2_CLK_GATE, 0);
 
                 /* Turn off phy power saving */
-                pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg1);
+                reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
                 reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
 
                 /* looks like this XL is back asswards .. */
@@ -232,18 +232,28 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
                         if (hw->ports > 1)
                                 reg1 |= PCI_Y2_PHY2_COMA;
                 }
-                pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+
+                if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+                        sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+                        reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
+                        reg1 &= P_ASPM_CONTROL_MSK;
+                        sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
+                        sky2_pci_write32(hw, PCI_DEV_REG5, 0);
+                }
+
+                sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+
                 break;
 
         case PCI_D3hot:
         case PCI_D3cold:
                 /* Turn on phy power saving */
-                pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg1);
+                reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
                 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
                         reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
                 else
                         reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
-                pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+                sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
 
                 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
                         sky2_write8(hw, B2_Y2_CLK_GATE, 0);
@@ -265,7 +275,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
                 ret = -1;
         }
 
-        pci_write_config_byte(hw->pdev, hw->pm_cap + PCI_PM_CTRL, power_control);
+        sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
         sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
         return ret;
 }
@@ -463,16 +473,31 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
                 ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
         }
 
-        gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
+        if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+                /* apply fixes in PHY AFE */
+                gm_phy_write(hw, port, 22, 255);
+                /* increase differential signal amplitude in 10BASE-T */
+                gm_phy_write(hw, port, 24, 0xaa99);
+                gm_phy_write(hw, port, 23, 0x2011);
 
-        if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
-                /* turn on 100 Mbps LED (LED_LINK100) */
-                ledover |= PHY_M_LED_MO_100(MO_LED_ON);
-        }
+                /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
+                gm_phy_write(hw, port, 24, 0xa204);
+                gm_phy_write(hw, port, 23, 0x2002);
 
-        if (ledover)
-                gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+                /* set page register to 0 */
+                gm_phy_write(hw, port, 22, 0);
+        } else {
+                gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
 
+                if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
+                        /* turn on 100 Mbps LED (LED_LINK100) */
+                        ledover |= PHY_M_LED_MO_100(MO_LED_ON);
+                }
+
+                if (ledover)
+                        gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+
+        }
         /* Enable phy interrupt on auto-negotiation complete (or link up) */
         if (sky2->autoneg == AUTONEG_ENABLE)
                 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
@@ -953,6 +978,12 @@ static int sky2_rx_start(struct sky2_port *sky2)
 
         sky2->rx_put = sky2->rx_next = 0;
         sky2_qset(hw, rxq);
+
+        if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+                /* MAC Rx RAM Read is controlled by hardware */
+                sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
+        }
+
         sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
 
         rx_set_checksum(sky2);
@@ -1035,9 +1066,10 @@ static int sky2_up(struct net_device *dev)
                     RB_RST_SET);
 
         sky2_qset(hw, txqaddr[port]);
-        if (hw->chip_id == CHIP_ID_YUKON_EC_U)
-                sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
 
+        /* Set almost empty threshold */
+        if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == 1)
+                sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
 
         sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
                            TX_RING_SIZE - 1);
@@ -1047,8 +1079,10 @@ static int sky2_up(struct net_device *dev)
                 goto err_out;
 
         /* Enable interrupts from phy/mac for port */
+        spin_lock_irq(&hw->hw_lock);
         hw->intr_mask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2;
         sky2_write32(hw, B0_IMSK, hw->intr_mask);
+        spin_unlock_irq(&hw->hw_lock);
         return 0;
 
 err_out:
@@ -1348,10 +1382,10 @@ static int sky2_down(struct net_device *dev)
         netif_stop_queue(dev);
 
         /* Disable port IRQ */
-        local_irq_disable();
+        spin_lock_irq(&hw->hw_lock);
         hw->intr_mask &= ~((sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
         sky2_write32(hw, B0_IMSK, hw->intr_mask);
-        local_irq_enable();
+        spin_unlock_irq(&hw->hw_lock);
 
         flush_scheduled_work();
 
@@ -1633,10 +1667,10 @@ static void sky2_phy_task(void *arg)
 out:
         up(&sky2->phy_sema);
 
-        local_irq_disable();
+        spin_lock_irq(&hw->hw_lock);
         hw->intr_mask |= (sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2;
         sky2_write32(hw, B0_IMSK, hw->intr_mask);
-        local_irq_enable();
+        spin_unlock_irq(&hw->hw_lock);
 }
 
 
@@ -1863,6 +1897,17 @@ static int sky2_poll(struct net_device *dev0, int *budget)
 
         sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
 
+        /*
+         * Kick the STAT_LEV_TIMER_CTRL timer.
+         * This fixes my hangs on Yukon-EC (0xb6) rev 1.
+         * The if clause is there to start the timer only if it has been
+         * configured correctly and not been disabled via ethtool.
+         */
+        if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_START) {
+                sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
+                sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
+        }
+
         hwidx = sky2_read16(hw, STAT_PUT_IDX);
         BUG_ON(hwidx >= STATUS_RING_SIZE);
         rmb();
@@ -1945,16 +1990,19 @@ exit_loop:
         sky2_tx_check(hw, 0, tx_done[0]);
         sky2_tx_check(hw, 1, tx_done[1]);
 
+        if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
+                sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
+                sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
+        }
+
         if (likely(work_done < to_do)) {
-                /* need to restart TX timer */
-                if (is_ec_a1(hw)) {
-                        sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
-                        sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
-                }
+                spin_lock_irq(&hw->hw_lock);
+                __netif_rx_complete(dev0);
 
-                netif_rx_complete(dev0);
                 hw->intr_mask |= Y2_IS_STAT_BMU;
                 sky2_write32(hw, B0_IMSK, hw->intr_mask);
+                spin_unlock_irq(&hw->hw_lock);
+
                 return 0;
         } else {
                 *budget -= work_done;
@@ -2017,13 +2065,13 @@ static void sky2_hw_intr(struct sky2_hw *hw)
         if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
                 u16 pci_err;
 
-                pci_read_config_word(hw->pdev, PCI_STATUS, &pci_err);
+                pci_err = sky2_pci_read16(hw, PCI_STATUS);
                 if (net_ratelimit())
                         printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
                                pci_name(hw->pdev), pci_err);
 
                 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-                pci_write_config_word(hw->pdev, PCI_STATUS,
+                sky2_pci_write16(hw, PCI_STATUS,
                                       pci_err | PCI_STATUS_ERROR_BITS);
                 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
         }
@@ -2032,7 +2080,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
                 /* PCI-Express uncorrectable Error occurred */
                 u32 pex_err;
 
-                pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err);
+                pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
 
                 if (net_ratelimit())
                         printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
@@ -2040,7 +2088,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 
                 /* clear the interrupt */
                 sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-                pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
+                sky2_pci_write32(hw, PEX_UNC_ERR_STAT,
                                        0xffffffffUL);
                 sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 
@@ -2086,6 +2134,7 @@ static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
 
         hw->intr_mask &= ~(port == 0 ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
         sky2_write32(hw, B0_IMSK, hw->intr_mask);
+
         schedule_work(&sky2->phy_task);
 }
 
@@ -2099,6 +2148,7 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
         if (status == 0 || status == ~0)
                 return IRQ_NONE;
 
+        spin_lock(&hw->hw_lock);
         if (status & Y2_IS_HW_ERR)
                 sky2_hw_intr(hw);
 
@@ -2127,7 +2177,7 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
 
         sky2_write32(hw, B0_Y2_SP_ICR, 2);
 
-        sky2_read32(hw, B0_IMSK);
+        spin_unlock(&hw->hw_lock);
 
         return IRQ_HANDLED;
 }
@@ -2170,7 +2220,7 @@ static int sky2_reset(struct sky2_hw *hw)
 {
         u16 status;
         u8 t8, pmd_type;
-        int i, err;
+        int i;
 
         sky2_write8(hw, B0_CTST, CS_RST_CLR);
 
@@ -2192,25 +2242,18 @@ static int sky2_reset(struct sky2_hw *hw)
         sky2_write8(hw, B0_CTST, CS_RST_CLR);
 
         /* clear PCI errors, if any */
-        err = pci_read_config_word(hw->pdev, PCI_STATUS, &status);
-        if (err)
-                goto pci_err;
+        status = sky2_pci_read16(hw, PCI_STATUS);
 
         sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-        err = pci_write_config_word(hw->pdev, PCI_STATUS,
-                                    status | PCI_STATUS_ERROR_BITS);
-        if (err)
-                goto pci_err;
+        sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS);
+
 
         sky2_write8(hw, B0_CTST, CS_MRST_CLR);
 
         /* clear any PEX errors */
-        if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) {
-                err = pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
-                                                 0xffffffffUL);
-                if (err)
-                        goto pci_err;
-        }
+        if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) 
+                sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
+
 
         pmd_type = sky2_read8(hw, B2_PMD_TYP);
         hw->copper = !(pmd_type == 'L' || pmd_type == 'S');
@@ -2309,8 +2352,7 @@ static int sky2_reset(struct sky2_hw *hw)
                         sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
 
                 sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
-                sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
-                sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
+                sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 7));
         }
 
         /* enable status unit */
@@ -2321,14 +2363,6 @@ static int sky2_reset(struct sky2_hw *hw)
         sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
 
         return 0;
-
-pci_err:
-        /* This is to catch a BIOS bug workaround where
-         * mmconfig table doesn't have other buses.
-         */
-        printk(KERN_ERR PFX "%s: can't access PCI config space\n",
-               pci_name(hw->pdev));
-        return err;
 }
 
 static u32 sky2_supported_modes(const struct sky2_hw *hw)
@@ -2852,11 +2886,11 @@ static int sky2_set_coalesce(struct net_device *dev,
             (ecmd->rx_coalesce_usecs_irq < tmin || ecmd->rx_coalesce_usecs_irq > tmax))
                 return -EINVAL;
 
-        if (ecmd->tx_max_coalesced_frames > 0xffff)
+        if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1)
                 return -EINVAL;
-        if (ecmd->rx_max_coalesced_frames > 0xff)
+        if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
                 return -EINVAL;
-        if (ecmd->rx_max_coalesced_frames_irq > 0xff)
+        if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
                 return -EINVAL;
 
         if (ecmd->tx_coalesce_usecs == 0)
@@ -3198,17 +3232,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
                 }
         }
 
-#ifdef __BIG_ENDIAN
-        /* byte swap descriptors in hardware */
-        {
-                u32 reg;
-
-                pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
-                reg |= PCI_REV_DESC;
-                pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
-        }
-#endif
-
         err = -ENOMEM;
         hw = kzalloc(sizeof(*hw), GFP_KERNEL);
         if (!hw) {
@@ -3226,6 +3249,18 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
                 goto err_out_free_hw;
         }
         hw->pm_cap = pm_cap;
+        spin_lock_init(&hw->hw_lock);
+
+#ifdef __BIG_ENDIAN
+        /* byte swap descriptors in hardware */
+        {
+                u32 reg;
+
+                reg = sky2_pci_read32(hw, PCI_DEV_REG2);
+                reg |= PCI_REV_DESC;
+                sky2_pci_write32(hw, PCI_DEV_REG2, reg);
+        }
+#endif
 
         /* ring for status responses */
         hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,