1 files changed, 0 insertions, 141 deletions

diff --git a/drivers/net/sk98lin/sklm80.c b/drivers/net/sk98lin/sklm80.c
deleted file mode 100644
index a204f5bb55d4..000000000000
--- a/drivers/net/sk98lin/sklm80.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/******************************************************************************
- *
- * Name:        sklm80.c
- * Project:     Gigabit Ethernet Adapters, TWSI-Module
- * Version:     $Revision: 1.22 $
- * Date:        $Date: 2003/10/20 09:08:21 $
- * Purpose:     Functions to access Voltage and Temperature Sensor (LM80)
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *      (C)Copyright 1998-2002 SysKonnect.
- *      (C)Copyright 2002-2003 Marvell.
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
-        LM80 functions
-*/
-#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
-static const char SysKonnectFileId[] =
-        "@(#) $Id: sklm80.c,v 1.22 2003/10/20 09:08:21 rschmidt Exp $ (C) Marvell. ";
-#endif
-
-#include "h/skdrv1st.h"         /* Driver Specific Definitions */
-#include "h/lm80.h"
-#include "h/skdrv2nd.h"         /* Adapter Control- and Driver specific Def. */
-
-#define BREAK_OR_WAIT(pAC,IoC,Event)    break
-
-/*
- * read a sensors value (LM80 specific)
- *
- * This function reads a sensors value from the I2C sensor chip LM80.
- * The sensor is defined by its index into the sensors database in the struct
- * pAC points to.
- *
- * Returns      1 if the read is completed
- *              0 if the read must be continued (I2C Bus still allocated)
- */
-int SkLm80ReadSensor(
-SK_AC           *pAC,   /* Adapter Context */
-SK_IOC          IoC,    /* I/O Context needed in level 1 and 2 */
-SK_SENSOR       *pSen)  /* Sensor to be read */
-{
-        SK_I32          Value;
-
-        switch (pSen->SenState) {
-        case SK_SEN_IDLE:
-                /* Send address to ADDR register */
-                SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, pSen->SenReg, 0);
-
-                pSen->SenState = SK_SEN_VALUE ;
-                BREAK_OR_WAIT(pAC, IoC, I2C_READ);
-        
-        case SK_SEN_VALUE:
-                /* Read value from data register */
-                SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));
-                
-                Value &= 0xff; /* only least significant byte is valid */
-
-                /* Do NOT check the Value against the thresholds */
-                /* Checking is done in the calling instance */
-
-                if (pSen->SenType == SK_SEN_VOLT) {
-                        /* Voltage sensor */
-                        pSen->SenValue = Value * SK_LM80_VT_LSB;
-                        pSen->SenState = SK_SEN_IDLE ;
-                        return(1);
-                }
-
-                if (pSen->SenType == SK_SEN_FAN) {
-                        if (Value != 0 && Value != 0xff) {
-                                /* Fan speed counter */
-                                pSen->SenValue = SK_LM80_FAN_FAKTOR/Value;
-                        }
-                        else {
-                                /* Indicate Fan error */
-                                pSen->SenValue = 0;
-                        }
-                        pSen->SenState = SK_SEN_IDLE ;
-                        return(1);
-                }
-
-                /* First: correct the value: it might be negative */
-                if ((Value & 0x80) != 0) {
-                        /* Value is negative */
-                        Value = Value - 256;
-                }
-
-                /* We have a temperature sensor and need to get the signed extension.
-                 * For now we get the extension from the last reading, so in the normal
-                 * case we won't see flickering temperatures.
-                 */
-                pSen->SenValue = (Value * SK_LM80_TEMP_LSB) +
-                        (pSen->SenValue % SK_LM80_TEMP_LSB);
-
-                /* Send address to ADDR register */
-                SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, LM80_TEMP_CTRL, 0);
-
-                pSen->SenState = SK_SEN_VALEXT ;
-                BREAK_OR_WAIT(pAC, IoC, I2C_READ);
-        
-        case SK_SEN_VALEXT:
-                /* Read value from data register */
-                SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));
-                Value &= LM80_TEMP_LSB_9; /* only bit 7 is valid */
-
-                /* cut the LSB bit */
-                pSen->SenValue = ((pSen->SenValue / SK_LM80_TEMP_LSB) *
-                        SK_LM80_TEMP_LSB);
-
-                if (pSen->SenValue < 0) {
-                        /* Value negative: The bit value must be subtracted */
-                        pSen->SenValue -= ((Value >> 7) * SK_LM80_TEMPEXT_LSB);
-                }
-                else {
-                        /* Value positive: The bit value must be added */
-                        pSen->SenValue += ((Value >> 7) * SK_LM80_TEMPEXT_LSB);
-                }
-
-                pSen->SenState = SK_SEN_IDLE ;
-                return(1);
-        
-        default:
-                SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E007, SKERR_I2C_E007MSG);
-                return(1);
-        }
-
-        /* Not completed */
-        return(0);
-}
-