1 files changed, 7 insertions, 5 deletions

diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index f21efe7bd316..6791be90c2fe 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -228,7 +228,8 @@ int sft9001_wait_boot(struct efx_nic *efx)
                 boot_stat = efx_mdio_read(efx, MDIO_MMD_PCS,
                                           PCS_BOOT_STATUS_REG);
                 if (boot_stat >= 0) {
-                        EFX_LOG(efx, "PHY boot status = %#x\n", boot_stat);
+                        netif_dbg(efx, hw, efx->net_dev,
+                                  "PHY boot status = %#x\n", boot_stat);
                         switch (boot_stat &
                                 ((1 << PCS_BOOT_FATAL_ERROR_LBN) |
                                  (3 << PCS_BOOT_PROGRESS_LBN) |
@@ -463,10 +464,11 @@ static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok)
                         reg |= PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN;
                 } else {
                         reg |= PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN;
-                        EFX_ERR(efx, "appears to be plugged into a port"
-                                " that is not 10GBASE-T capable. The PHY"
-                                " supports 10GBASE-T ONLY, so no link can"
-                                " be established\n");
+                        netif_err(efx, link, efx->net_dev,
+                                  "appears to be plugged into a port"
+                                  " that is not 10GBASE-T capable. The PHY"
+                                  " supports 10GBASE-T ONLY, so no link can"
+                                  " be established\n");
                 }
                 efx_mdio_write(efx, MDIO_MMD_PMAPMD,
                                PMA_PMD_LED_OVERR_REG, reg);