diff options
Diffstat (limited to 'drivers/net/sfc/net_driver.h')
-rw-r--r-- | drivers/net/sfc/net_driver.h | 883 |
1 files changed, 883 insertions, 0 deletions
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h new file mode 100644 index 000000000000..c505482c2520 --- /dev/null +++ b/drivers/net/sfc/net_driver.h | |||
@@ -0,0 +1,883 @@ | |||
1 | /**************************************************************************** | ||
2 | * Driver for Solarflare Solarstorm network controllers and boards | ||
3 | * Copyright 2005-2006 Fen Systems Ltd. | ||
4 | * Copyright 2005-2008 Solarflare Communications Inc. | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify it | ||
7 | * under the terms of the GNU General Public License version 2 as published | ||
8 | * by the Free Software Foundation, incorporated herein by reference. | ||
9 | */ | ||
10 | |||
11 | /* Common definitions for all Efx net driver code */ | ||
12 | |||
13 | #ifndef EFX_NET_DRIVER_H | ||
14 | #define EFX_NET_DRIVER_H | ||
15 | |||
16 | #include <linux/version.h> | ||
17 | #include <linux/netdevice.h> | ||
18 | #include <linux/etherdevice.h> | ||
19 | #include <linux/ethtool.h> | ||
20 | #include <linux/if_vlan.h> | ||
21 | #include <linux/timer.h> | ||
22 | #include <linux/mii.h> | ||
23 | #include <linux/list.h> | ||
24 | #include <linux/pci.h> | ||
25 | #include <linux/device.h> | ||
26 | #include <linux/highmem.h> | ||
27 | #include <linux/workqueue.h> | ||
28 | #include <linux/inet_lro.h> | ||
29 | |||
30 | #include "enum.h" | ||
31 | #include "bitfield.h" | ||
32 | #include "i2c-direct.h" | ||
33 | |||
34 | #define EFX_MAX_LRO_DESCRIPTORS 8 | ||
35 | #define EFX_MAX_LRO_AGGR MAX_SKB_FRAGS | ||
36 | |||
37 | /************************************************************************** | ||
38 | * | ||
39 | * Build definitions | ||
40 | * | ||
41 | **************************************************************************/ | ||
42 | #ifndef EFX_DRIVER_NAME | ||
43 | #define EFX_DRIVER_NAME "sfc" | ||
44 | #endif | ||
45 | #define EFX_DRIVER_VERSION "2.2.0136" | ||
46 | |||
47 | #ifdef EFX_ENABLE_DEBUG | ||
48 | #define EFX_BUG_ON_PARANOID(x) BUG_ON(x) | ||
49 | #define EFX_WARN_ON_PARANOID(x) WARN_ON(x) | ||
50 | #else | ||
51 | #define EFX_BUG_ON_PARANOID(x) do {} while (0) | ||
52 | #define EFX_WARN_ON_PARANOID(x) do {} while (0) | ||
53 | #endif | ||
54 | |||
55 | #define NET_DEV_REGISTERED(efx) \ | ||
56 | ((efx)->net_dev->reg_state == NETREG_REGISTERED) | ||
57 | |||
58 | /* Include net device name in log messages if it has been registered. | ||
59 | * Use efx->name not efx->net_dev->name so that races with (un)registration | ||
60 | * are harmless. | ||
61 | */ | ||
62 | #define NET_DEV_NAME(efx) (NET_DEV_REGISTERED(efx) ? (efx)->name : "") | ||
63 | |||
64 | /* Un-rate-limited logging */ | ||
65 | #define EFX_ERR(efx, fmt, args...) \ | ||
66 | dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, NET_DEV_NAME(efx), ##args) | ||
67 | |||
68 | #define EFX_INFO(efx, fmt, args...) \ | ||
69 | dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, NET_DEV_NAME(efx), ##args) | ||
70 | |||
71 | #ifdef EFX_ENABLE_DEBUG | ||
72 | #define EFX_LOG(efx, fmt, args...) \ | ||
73 | dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args) | ||
74 | #else | ||
75 | #define EFX_LOG(efx, fmt, args...) \ | ||
76 | dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args) | ||
77 | #endif | ||
78 | |||
79 | #define EFX_TRACE(efx, fmt, args...) do {} while (0) | ||
80 | |||
81 | #define EFX_REGDUMP(efx, fmt, args...) do {} while (0) | ||
82 | |||
83 | /* Rate-limited logging */ | ||
84 | #define EFX_ERR_RL(efx, fmt, args...) \ | ||
85 | do {if (net_ratelimit()) EFX_ERR(efx, fmt, ##args); } while (0) | ||
86 | |||
87 | #define EFX_INFO_RL(efx, fmt, args...) \ | ||
88 | do {if (net_ratelimit()) EFX_INFO(efx, fmt, ##args); } while (0) | ||
89 | |||
90 | #define EFX_LOG_RL(efx, fmt, args...) \ | ||
91 | do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0) | ||
92 | |||
93 | /* Kernel headers may redefine inline anyway */ | ||
94 | #ifndef inline | ||
95 | #define inline inline __attribute__ ((always_inline)) | ||
96 | #endif | ||
97 | |||
98 | /************************************************************************** | ||
99 | * | ||
100 | * Efx data structures | ||
101 | * | ||
102 | **************************************************************************/ | ||
103 | |||
104 | #define EFX_MAX_CHANNELS 32 | ||
105 | #define EFX_MAX_TX_QUEUES 1 | ||
106 | #define EFX_MAX_RX_QUEUES EFX_MAX_CHANNELS | ||
107 | |||
108 | /** | ||
109 | * struct efx_special_buffer - An Efx special buffer | ||
110 | * @addr: CPU base address of the buffer | ||
111 | * @dma_addr: DMA base address of the buffer | ||
112 | * @len: Buffer length, in bytes | ||
113 | * @index: Buffer index within controller;s buffer table | ||
114 | * @entries: Number of buffer table entries | ||
115 | * | ||
116 | * Special buffers are used for the event queues and the TX and RX | ||
117 | * descriptor queues for each channel. They are *not* used for the | ||
118 | * actual transmit and receive buffers. | ||
119 | * | ||
120 | * Note that for Falcon, TX and RX descriptor queues live in host memory. | ||
121 | * Allocation and freeing procedures must take this into account. | ||
122 | */ | ||
123 | struct efx_special_buffer { | ||
124 | void *addr; | ||
125 | dma_addr_t dma_addr; | ||
126 | unsigned int len; | ||
127 | int index; | ||
128 | int entries; | ||
129 | }; | ||
130 | |||
131 | /** | ||
132 | * struct efx_tx_buffer - An Efx TX buffer | ||
133 | * @skb: The associated socket buffer. | ||
134 | * Set only on the final fragment of a packet; %NULL for all other | ||
135 | * fragments. When this fragment completes, then we can free this | ||
136 | * skb. | ||
137 | * @dma_addr: DMA address of the fragment. | ||
138 | * @len: Length of this fragment. | ||
139 | * This field is zero when the queue slot is empty. | ||
140 | * @continuation: True if this fragment is not the end of a packet. | ||
141 | * @unmap_single: True if pci_unmap_single should be used. | ||
142 | * @unmap_addr: DMA address to unmap | ||
143 | * @unmap_len: Length of this fragment to unmap | ||
144 | */ | ||
145 | struct efx_tx_buffer { | ||
146 | const struct sk_buff *skb; | ||
147 | dma_addr_t dma_addr; | ||
148 | unsigned short len; | ||
149 | unsigned char continuation; | ||
150 | unsigned char unmap_single; | ||
151 | dma_addr_t unmap_addr; | ||
152 | unsigned short unmap_len; | ||
153 | }; | ||
154 | |||
155 | /** | ||
156 | * struct efx_tx_queue - An Efx TX queue | ||
157 | * | ||
158 | * This is a ring buffer of TX fragments. | ||
159 | * Since the TX completion path always executes on the same | ||
160 | * CPU and the xmit path can operate on different CPUs, | ||
161 | * performance is increased by ensuring that the completion | ||
162 | * path and the xmit path operate on different cache lines. | ||
163 | * This is particularly important if the xmit path is always | ||
164 | * executing on one CPU which is different from the completion | ||
165 | * path. There is also a cache line for members which are | ||
166 | * read but not written on the fast path. | ||
167 | * | ||
168 | * @efx: The associated Efx NIC | ||
169 | * @queue: DMA queue number | ||
170 | * @used: Queue is used by net driver | ||
171 | * @channel: The associated channel | ||
172 | * @buffer: The software buffer ring | ||
173 | * @txd: The hardware descriptor ring | ||
174 | * @read_count: Current read pointer. | ||
175 | * This is the number of buffers that have been removed from both rings. | ||
176 | * @stopped: Stopped flag. | ||
177 | * Set if this TX queue is currently stopping its port. | ||
178 | * @insert_count: Current insert pointer | ||
179 | * This is the number of buffers that have been added to the | ||
180 | * software ring. | ||
181 | * @write_count: Current write pointer | ||
182 | * This is the number of buffers that have been added to the | ||
183 | * hardware ring. | ||
184 | * @old_read_count: The value of read_count when last checked. | ||
185 | * This is here for performance reasons. The xmit path will | ||
186 | * only get the up-to-date value of read_count if this | ||
187 | * variable indicates that the queue is full. This is to | ||
188 | * avoid cache-line ping-pong between the xmit path and the | ||
189 | * completion path. | ||
190 | */ | ||
191 | struct efx_tx_queue { | ||
192 | /* Members which don't change on the fast path */ | ||
193 | struct efx_nic *efx ____cacheline_aligned_in_smp; | ||
194 | int queue; | ||
195 | int used; | ||
196 | struct efx_channel *channel; | ||
197 | struct efx_nic *nic; | ||
198 | struct efx_tx_buffer *buffer; | ||
199 | struct efx_special_buffer txd; | ||
200 | |||
201 | /* Members used mainly on the completion path */ | ||
202 | unsigned int read_count ____cacheline_aligned_in_smp; | ||
203 | int stopped; | ||
204 | |||
205 | /* Members used only on the xmit path */ | ||
206 | unsigned int insert_count ____cacheline_aligned_in_smp; | ||
207 | unsigned int write_count; | ||
208 | unsigned int old_read_count; | ||
209 | }; | ||
210 | |||
211 | /** | ||
212 | * struct efx_rx_buffer - An Efx RX data buffer | ||
213 | * @dma_addr: DMA base address of the buffer | ||
214 | * @skb: The associated socket buffer, if any. | ||
215 | * If both this and page are %NULL, the buffer slot is currently free. | ||
216 | * @page: The associated page buffer, if any. | ||
217 | * If both this and skb are %NULL, the buffer slot is currently free. | ||
218 | * @data: Pointer to ethernet header | ||
219 | * @len: Buffer length, in bytes. | ||
220 | * @unmap_addr: DMA address to unmap | ||
221 | */ | ||
222 | struct efx_rx_buffer { | ||
223 | dma_addr_t dma_addr; | ||
224 | struct sk_buff *skb; | ||
225 | struct page *page; | ||
226 | char *data; | ||
227 | unsigned int len; | ||
228 | dma_addr_t unmap_addr; | ||
229 | }; | ||
230 | |||
231 | /** | ||
232 | * struct efx_rx_queue - An Efx RX queue | ||
233 | * @efx: The associated Efx NIC | ||
234 | * @queue: DMA queue number | ||
235 | * @used: Queue is used by net driver | ||
236 | * @channel: The associated channel | ||
237 | * @buffer: The software buffer ring | ||
238 | * @rxd: The hardware descriptor ring | ||
239 | * @added_count: Number of buffers added to the receive queue. | ||
240 | * @notified_count: Number of buffers given to NIC (<= @added_count). | ||
241 | * @removed_count: Number of buffers removed from the receive queue. | ||
242 | * @add_lock: Receive queue descriptor add spin lock. | ||
243 | * This lock must be held in order to add buffers to the RX | ||
244 | * descriptor ring (rxd and buffer) and to update added_count (but | ||
245 | * not removed_count). | ||
246 | * @max_fill: RX descriptor maximum fill level (<= ring size) | ||
247 | * @fast_fill_trigger: RX descriptor fill level that will trigger a fast fill | ||
248 | * (<= @max_fill) | ||
249 | * @fast_fill_limit: The level to which a fast fill will fill | ||
250 | * (@fast_fill_trigger <= @fast_fill_limit <= @max_fill) | ||
251 | * @min_fill: RX descriptor minimum non-zero fill level. | ||
252 | * This records the minimum fill level observed when a ring | ||
253 | * refill was triggered. | ||
254 | * @min_overfill: RX descriptor minimum overflow fill level. | ||
255 | * This records the minimum fill level at which RX queue | ||
256 | * overflow was observed. It should never be set. | ||
257 | * @alloc_page_count: RX allocation strategy counter. | ||
258 | * @alloc_skb_count: RX allocation strategy counter. | ||
259 | * @work: Descriptor push work thread | ||
260 | * @buf_page: Page for next RX buffer. | ||
261 | * We can use a single page for multiple RX buffers. This tracks | ||
262 | * the remaining space in the allocation. | ||
263 | * @buf_dma_addr: Page's DMA address. | ||
264 | * @buf_data: Page's host address. | ||
265 | */ | ||
266 | struct efx_rx_queue { | ||
267 | struct efx_nic *efx; | ||
268 | int queue; | ||
269 | int used; | ||
270 | struct efx_channel *channel; | ||
271 | struct efx_rx_buffer *buffer; | ||
272 | struct efx_special_buffer rxd; | ||
273 | |||
274 | int added_count; | ||
275 | int notified_count; | ||
276 | int removed_count; | ||
277 | spinlock_t add_lock; | ||
278 | unsigned int max_fill; | ||
279 | unsigned int fast_fill_trigger; | ||
280 | unsigned int fast_fill_limit; | ||
281 | unsigned int min_fill; | ||
282 | unsigned int min_overfill; | ||
283 | unsigned int alloc_page_count; | ||
284 | unsigned int alloc_skb_count; | ||
285 | struct delayed_work work; | ||
286 | unsigned int slow_fill_count; | ||
287 | |||
288 | struct page *buf_page; | ||
289 | dma_addr_t buf_dma_addr; | ||
290 | char *buf_data; | ||
291 | }; | ||
292 | |||
293 | /** | ||
294 | * struct efx_buffer - An Efx general-purpose buffer | ||
295 | * @addr: host base address of the buffer | ||
296 | * @dma_addr: DMA base address of the buffer | ||
297 | * @len: Buffer length, in bytes | ||
298 | * | ||
299 | * Falcon uses these buffers for its interrupt status registers and | ||
300 | * MAC stats dumps. | ||
301 | */ | ||
302 | struct efx_buffer { | ||
303 | void *addr; | ||
304 | dma_addr_t dma_addr; | ||
305 | unsigned int len; | ||
306 | }; | ||
307 | |||
308 | |||
309 | /* Flags for channel->used_flags */ | ||
310 | #define EFX_USED_BY_RX 1 | ||
311 | #define EFX_USED_BY_TX 2 | ||
312 | #define EFX_USED_BY_RX_TX (EFX_USED_BY_RX | EFX_USED_BY_TX) | ||
313 | |||
314 | enum efx_rx_alloc_method { | ||
315 | RX_ALLOC_METHOD_AUTO = 0, | ||
316 | RX_ALLOC_METHOD_SKB = 1, | ||
317 | RX_ALLOC_METHOD_PAGE = 2, | ||
318 | }; | ||
319 | |||
320 | /** | ||
321 | * struct efx_channel - An Efx channel | ||
322 | * | ||
323 | * A channel comprises an event queue, at least one TX queue, at least | ||
324 | * one RX queue, and an associated tasklet for processing the event | ||
325 | * queue. | ||
326 | * | ||
327 | * @efx: Associated Efx NIC | ||
328 | * @evqnum: Event queue number | ||
329 | * @channel: Channel instance number | ||
330 | * @used_flags: Channel is used by net driver | ||
331 | * @enabled: Channel enabled indicator | ||
332 | * @irq: IRQ number (MSI and MSI-X only) | ||
333 | * @has_interrupt: Channel has an interrupt | ||
334 | * @irq_moderation: IRQ moderation value (in us) | ||
335 | * @napi_dev: Net device used with NAPI | ||
336 | * @napi_str: NAPI control structure | ||
337 | * @reset_work: Scheduled reset work thread | ||
338 | * @work_pending: Is work pending via NAPI? | ||
339 | * @eventq: Event queue buffer | ||
340 | * @eventq_read_ptr: Event queue read pointer | ||
341 | * @last_eventq_read_ptr: Last event queue read pointer value. | ||
342 | * @eventq_magic: Event queue magic value for driver-generated test events | ||
343 | * @lro_mgr: LRO state | ||
344 | * @rx_alloc_level: Watermark based heuristic counter for pushing descriptors | ||
345 | * and diagnostic counters | ||
346 | * @rx_alloc_push_pages: RX allocation method currently in use for pushing | ||
347 | * descriptors | ||
348 | * @rx_alloc_pop_pages: RX allocation method currently in use for popping | ||
349 | * descriptors | ||
350 | * @n_rx_tobe_disc: Count of RX_TOBE_DISC errors | ||
351 | * @n_rx_ip_frag_err: Count of RX IP fragment errors | ||
352 | * @n_rx_ip_hdr_chksum_err: Count of RX IP header checksum errors | ||
353 | * @n_rx_tcp_udp_chksum_err: Count of RX TCP and UDP checksum errors | ||
354 | * @n_rx_frm_trunc: Count of RX_FRM_TRUNC errors | ||
355 | * @n_rx_overlength: Count of RX_OVERLENGTH errors | ||
356 | * @n_skbuff_leaks: Count of skbuffs leaked due to RX overrun | ||
357 | */ | ||
358 | struct efx_channel { | ||
359 | struct efx_nic *efx; | ||
360 | int evqnum; | ||
361 | int channel; | ||
362 | int used_flags; | ||
363 | int enabled; | ||
364 | int irq; | ||
365 | unsigned int has_interrupt; | ||
366 | unsigned int irq_moderation; | ||
367 | struct net_device *napi_dev; | ||
368 | struct napi_struct napi_str; | ||
369 | struct work_struct reset_work; | ||
370 | int work_pending; | ||
371 | struct efx_special_buffer eventq; | ||
372 | unsigned int eventq_read_ptr; | ||
373 | unsigned int last_eventq_read_ptr; | ||
374 | unsigned int eventq_magic; | ||
375 | |||
376 | struct net_lro_mgr lro_mgr; | ||
377 | int rx_alloc_level; | ||
378 | int rx_alloc_push_pages; | ||
379 | int rx_alloc_pop_pages; | ||
380 | |||
381 | unsigned n_rx_tobe_disc; | ||
382 | unsigned n_rx_ip_frag_err; | ||
383 | unsigned n_rx_ip_hdr_chksum_err; | ||
384 | unsigned n_rx_tcp_udp_chksum_err; | ||
385 | unsigned n_rx_frm_trunc; | ||
386 | unsigned n_rx_overlength; | ||
387 | unsigned n_skbuff_leaks; | ||
388 | |||
389 | /* Used to pipeline received packets in order to optimise memory | ||
390 | * access with prefetches. | ||
391 | */ | ||
392 | struct efx_rx_buffer *rx_pkt; | ||
393 | int rx_pkt_csummed; | ||
394 | |||
395 | }; | ||
396 | |||
397 | /** | ||
398 | * struct efx_blinker - S/W LED blinking context | ||
399 | * @led_num: LED ID (board-specific meaning) | ||
400 | * @state: Current state - on or off | ||
401 | * @resubmit: Timer resubmission flag | ||
402 | * @timer: Control timer for blinking | ||
403 | */ | ||
404 | struct efx_blinker { | ||
405 | int led_num; | ||
406 | int state; | ||
407 | int resubmit; | ||
408 | struct timer_list timer; | ||
409 | }; | ||
410 | |||
411 | |||
412 | /** | ||
413 | * struct efx_board - board information | ||
414 | * @type: Board model type | ||
415 | * @major: Major rev. ('A', 'B' ...) | ||
416 | * @minor: Minor rev. (0, 1, ...) | ||
417 | * @init: Initialisation function | ||
418 | * @init_leds: Sets up board LEDs | ||
419 | * @set_fault_led: Turns the fault LED on or off | ||
420 | * @blink: Starts/stops blinking | ||
421 | * @blinker: used to blink LEDs in software | ||
422 | */ | ||
423 | struct efx_board { | ||
424 | int type; | ||
425 | int major; | ||
426 | int minor; | ||
427 | int (*init) (struct efx_nic *nic); | ||
428 | /* As the LEDs are typically attached to the PHY, LEDs | ||
429 | * have a separate init callback that happens later than | ||
430 | * board init. */ | ||
431 | int (*init_leds)(struct efx_nic *efx); | ||
432 | void (*set_fault_led) (struct efx_nic *efx, int state); | ||
433 | void (*blink) (struct efx_nic *efx, int start); | ||
434 | struct efx_blinker blinker; | ||
435 | }; | ||
436 | |||
437 | enum efx_int_mode { | ||
438 | /* Be careful if altering to correct macro below */ | ||
439 | EFX_INT_MODE_MSIX = 0, | ||
440 | EFX_INT_MODE_MSI = 1, | ||
441 | EFX_INT_MODE_LEGACY = 2, | ||
442 | EFX_INT_MODE_MAX /* Insert any new items before this */ | ||
443 | }; | ||
444 | #define EFX_INT_MODE_USE_MSI(x) (((x)->interrupt_mode) <= EFX_INT_MODE_MSI) | ||
445 | |||
446 | enum phy_type { | ||
447 | PHY_TYPE_NONE = 0, | ||
448 | PHY_TYPE_CX4_RTMR = 1, | ||
449 | PHY_TYPE_1G_ALASKA = 2, | ||
450 | PHY_TYPE_10XPRESS = 3, | ||
451 | PHY_TYPE_XFP = 4, | ||
452 | PHY_TYPE_PM8358 = 6, | ||
453 | PHY_TYPE_MAX /* Insert any new items before this */ | ||
454 | }; | ||
455 | |||
456 | #define PHY_ADDR_INVALID 0xff | ||
457 | |||
458 | enum nic_state { | ||
459 | STATE_INIT = 0, | ||
460 | STATE_RUNNING = 1, | ||
461 | STATE_FINI = 2, | ||
462 | STATE_RESETTING = 3, /* rtnl_lock always held */ | ||
463 | STATE_DISABLED = 4, | ||
464 | STATE_MAX, | ||
465 | }; | ||
466 | |||
467 | /* | ||
468 | * Alignment of page-allocated RX buffers | ||
469 | * | ||
470 | * Controls the number of bytes inserted at the start of an RX buffer. | ||
471 | * This is the equivalent of NET_IP_ALIGN [which controls the alignment | ||
472 | * of the skb->head for hardware DMA]. | ||
473 | */ | ||
474 | #if defined(__i386__) || defined(__x86_64__) | ||
475 | #define EFX_PAGE_IP_ALIGN 0 | ||
476 | #else | ||
477 | #define EFX_PAGE_IP_ALIGN NET_IP_ALIGN | ||
478 | #endif | ||
479 | |||
480 | /* | ||
481 | * Alignment of the skb->head which wraps a page-allocated RX buffer | ||
482 | * | ||
483 | * The skb allocated to wrap an rx_buffer can have this alignment. Since | ||
484 | * the data is memcpy'd from the rx_buf, it does not need to be equal to | ||
485 | * EFX_PAGE_IP_ALIGN. | ||
486 | */ | ||
487 | #define EFX_PAGE_SKB_ALIGN 2 | ||
488 | |||
489 | /* Forward declaration */ | ||
490 | struct efx_nic; | ||
491 | |||
492 | /* Pseudo bit-mask flow control field */ | ||
493 | enum efx_fc_type { | ||
494 | EFX_FC_RX = 1, | ||
495 | EFX_FC_TX = 2, | ||
496 | EFX_FC_AUTO = 4, | ||
497 | }; | ||
498 | |||
499 | /** | ||
500 | * struct efx_phy_operations - Efx PHY operations table | ||
501 | * @init: Initialise PHY | ||
502 | * @fini: Shut down PHY | ||
503 | * @reconfigure: Reconfigure PHY (e.g. for new link parameters) | ||
504 | * @clear_interrupt: Clear down interrupt | ||
505 | * @blink: Blink LEDs | ||
506 | * @check_hw: Check hardware | ||
507 | * @reset_xaui: Reset XAUI side of PHY for (software sequenced reset) | ||
508 | * @mmds: MMD presence mask | ||
509 | */ | ||
510 | struct efx_phy_operations { | ||
511 | int (*init) (struct efx_nic *efx); | ||
512 | void (*fini) (struct efx_nic *efx); | ||
513 | void (*reconfigure) (struct efx_nic *efx); | ||
514 | void (*clear_interrupt) (struct efx_nic *efx); | ||
515 | int (*check_hw) (struct efx_nic *efx); | ||
516 | void (*reset_xaui) (struct efx_nic *efx); | ||
517 | int mmds; | ||
518 | }; | ||
519 | |||
520 | /* | ||
521 | * Efx extended statistics | ||
522 | * | ||
523 | * Not all statistics are provided by all supported MACs. The purpose | ||
524 | * is this structure is to contain the raw statistics provided by each | ||
525 | * MAC. | ||
526 | */ | ||
527 | struct efx_mac_stats { | ||
528 | u64 tx_bytes; | ||
529 | u64 tx_good_bytes; | ||
530 | u64 tx_bad_bytes; | ||
531 | unsigned long tx_packets; | ||
532 | unsigned long tx_bad; | ||
533 | unsigned long tx_pause; | ||
534 | unsigned long tx_control; | ||
535 | unsigned long tx_unicast; | ||
536 | unsigned long tx_multicast; | ||
537 | unsigned long tx_broadcast; | ||
538 | unsigned long tx_lt64; | ||
539 | unsigned long tx_64; | ||
540 | unsigned long tx_65_to_127; | ||
541 | unsigned long tx_128_to_255; | ||
542 | unsigned long tx_256_to_511; | ||
543 | unsigned long tx_512_to_1023; | ||
544 | unsigned long tx_1024_to_15xx; | ||
545 | unsigned long tx_15xx_to_jumbo; | ||
546 | unsigned long tx_gtjumbo; | ||
547 | unsigned long tx_collision; | ||
548 | unsigned long tx_single_collision; | ||
549 | unsigned long tx_multiple_collision; | ||
550 | unsigned long tx_excessive_collision; | ||
551 | unsigned long tx_deferred; | ||
552 | unsigned long tx_late_collision; | ||
553 | unsigned long tx_excessive_deferred; | ||
554 | unsigned long tx_non_tcpudp; | ||
555 | unsigned long tx_mac_src_error; | ||
556 | unsigned long tx_ip_src_error; | ||
557 | u64 rx_bytes; | ||
558 | u64 rx_good_bytes; | ||
559 | u64 rx_bad_bytes; | ||
560 | unsigned long rx_packets; | ||
561 | unsigned long rx_good; | ||
562 | unsigned long rx_bad; | ||
563 | unsigned long rx_pause; | ||
564 | unsigned long rx_control; | ||
565 | unsigned long rx_unicast; | ||
566 | unsigned long rx_multicast; | ||
567 | unsigned long rx_broadcast; | ||
568 | unsigned long rx_lt64; | ||
569 | unsigned long rx_64; | ||
570 | unsigned long rx_65_to_127; | ||
571 | unsigned long rx_128_to_255; | ||
572 | unsigned long rx_256_to_511; | ||
573 | unsigned long rx_512_to_1023; | ||
574 | unsigned long rx_1024_to_15xx; | ||
575 | unsigned long rx_15xx_to_jumbo; | ||
576 | unsigned long rx_gtjumbo; | ||
577 | unsigned long rx_bad_lt64; | ||
578 | unsigned long rx_bad_64_to_15xx; | ||
579 | unsigned long rx_bad_15xx_to_jumbo; | ||
580 | unsigned long rx_bad_gtjumbo; | ||
581 | unsigned long rx_overflow; | ||
582 | unsigned long rx_missed; | ||
583 | unsigned long rx_false_carrier; | ||
584 | unsigned long rx_symbol_error; | ||
585 | unsigned long rx_align_error; | ||
586 | unsigned long rx_length_error; | ||
587 | unsigned long rx_internal_error; | ||
588 | unsigned long rx_good_lt64; | ||
589 | }; | ||
590 | |||
591 | /* Number of bits used in a multicast filter hash address */ | ||
592 | #define EFX_MCAST_HASH_BITS 8 | ||
593 | |||
594 | /* Number of (single-bit) entries in a multicast filter hash */ | ||
595 | #define EFX_MCAST_HASH_ENTRIES (1 << EFX_MCAST_HASH_BITS) | ||
596 | |||
597 | /* An Efx multicast filter hash */ | ||
598 | union efx_multicast_hash { | ||
599 | u8 byte[EFX_MCAST_HASH_ENTRIES / 8]; | ||
600 | efx_oword_t oword[EFX_MCAST_HASH_ENTRIES / sizeof(efx_oword_t) / 8]; | ||
601 | }; | ||
602 | |||
603 | /** | ||
604 | * struct efx_nic - an Efx NIC | ||
605 | * @name: Device name (net device name or bus id before net device registered) | ||
606 | * @pci_dev: The PCI device | ||
607 | * @type: Controller type attributes | ||
608 | * @legacy_irq: IRQ number | ||
609 | * @workqueue: Workqueue for resets, port reconfigures and the HW monitor | ||
610 | * @reset_work: Scheduled reset workitem | ||
611 | * @monitor_work: Hardware monitor workitem | ||
612 | * @membase_phys: Memory BAR value as physical address | ||
613 | * @membase: Memory BAR value | ||
614 | * @biu_lock: BIU (bus interface unit) lock | ||
615 | * @interrupt_mode: Interrupt mode | ||
616 | * @i2c: I2C interface | ||
617 | * @board_info: Board-level information | ||
618 | * @state: Device state flag. Serialised by the rtnl_lock. | ||
619 | * @reset_pending: Pending reset method (normally RESET_TYPE_NONE) | ||
620 | * @tx_queue: TX DMA queues | ||
621 | * @rx_queue: RX DMA queues | ||
622 | * @channel: Channels | ||
623 | * @rss_queues: Number of RSS queues | ||
624 | * @rx_buffer_len: RX buffer length | ||
625 | * @rx_buffer_order: Order (log2) of number of pages for each RX buffer | ||
626 | * @irq_status: Interrupt status buffer | ||
627 | * @last_irq_cpu: Last CPU to handle interrupt. | ||
628 | * This register is written with the SMP processor ID whenever an | ||
629 | * interrupt is handled. It is used by falcon_test_interrupt() | ||
630 | * to verify that an interrupt has occurred. | ||
631 | * @n_rx_nodesc_drop_cnt: RX no descriptor drop count | ||
632 | * @nic_data: Hardware dependant state | ||
633 | * @mac_lock: MAC access lock. Protects @port_enabled, efx_monitor() and | ||
634 | * efx_reconfigure_port() | ||
635 | * @port_enabled: Port enabled indicator. | ||
636 | * Serialises efx_stop_all(), efx_start_all() and efx_monitor() and | ||
637 | * efx_reconfigure_work with kernel interfaces. Safe to read under any | ||
638 | * one of the rtnl_lock, mac_lock, or netif_tx_lock, but all three must | ||
639 | * be held to modify it. | ||
640 | * @port_initialized: Port initialized? | ||
641 | * @net_dev: Operating system network device. Consider holding the rtnl lock | ||
642 | * @rx_checksum_enabled: RX checksumming enabled | ||
643 | * @netif_stop_count: Port stop count | ||
644 | * @netif_stop_lock: Port stop lock | ||
645 | * @mac_stats: MAC statistics. These include all statistics the MACs | ||
646 | * can provide. Generic code converts these into a standard | ||
647 | * &struct net_device_stats. | ||
648 | * @stats_buffer: DMA buffer for statistics | ||
649 | * @stats_lock: Statistics update lock | ||
650 | * @mac_address: Permanent MAC address | ||
651 | * @phy_type: PHY type | ||
652 | * @phy_lock: PHY access lock | ||
653 | * @phy_op: PHY interface | ||
654 | * @phy_data: PHY private data (including PHY-specific stats) | ||
655 | * @mii: PHY interface | ||
656 | * @phy_powered: PHY power state | ||
657 | * @tx_disabled: PHY transmitter turned off | ||
658 | * @link_up: Link status | ||
659 | * @link_options: Link options (MII/GMII format) | ||
660 | * @n_link_state_changes: Number of times the link has changed state | ||
661 | * @promiscuous: Promiscuous flag. Protected by netif_tx_lock. | ||
662 | * @multicast_hash: Multicast hash table | ||
663 | * @flow_control: Flow control flags - separate RX/TX so can't use link_options | ||
664 | * @reconfigure_work: work item for dealing with PHY events | ||
665 | * | ||
666 | * The @priv field of the corresponding &struct net_device points to | ||
667 | * this. | ||
668 | */ | ||
669 | struct efx_nic { | ||
670 | char name[IFNAMSIZ]; | ||
671 | struct pci_dev *pci_dev; | ||
672 | const struct efx_nic_type *type; | ||
673 | int legacy_irq; | ||
674 | struct workqueue_struct *workqueue; | ||
675 | struct work_struct reset_work; | ||
676 | struct delayed_work monitor_work; | ||
677 | unsigned long membase_phys; | ||
678 | void __iomem *membase; | ||
679 | spinlock_t biu_lock; | ||
680 | enum efx_int_mode interrupt_mode; | ||
681 | |||
682 | struct efx_i2c_interface i2c; | ||
683 | struct efx_board board_info; | ||
684 | |||
685 | enum nic_state state; | ||
686 | enum reset_type reset_pending; | ||
687 | |||
688 | struct efx_tx_queue tx_queue[EFX_MAX_TX_QUEUES]; | ||
689 | struct efx_rx_queue rx_queue[EFX_MAX_RX_QUEUES]; | ||
690 | struct efx_channel channel[EFX_MAX_CHANNELS]; | ||
691 | |||
692 | int rss_queues; | ||
693 | unsigned int rx_buffer_len; | ||
694 | unsigned int rx_buffer_order; | ||
695 | |||
696 | struct efx_buffer irq_status; | ||
697 | volatile signed int last_irq_cpu; | ||
698 | |||
699 | unsigned n_rx_nodesc_drop_cnt; | ||
700 | |||
701 | void *nic_data; | ||
702 | |||
703 | struct mutex mac_lock; | ||
704 | int port_enabled; | ||
705 | |||
706 | int port_initialized; | ||
707 | struct net_device *net_dev; | ||
708 | int rx_checksum_enabled; | ||
709 | |||
710 | atomic_t netif_stop_count; | ||
711 | spinlock_t netif_stop_lock; | ||
712 | |||
713 | struct efx_mac_stats mac_stats; | ||
714 | struct efx_buffer stats_buffer; | ||
715 | spinlock_t stats_lock; | ||
716 | |||
717 | unsigned char mac_address[ETH_ALEN]; | ||
718 | |||
719 | enum phy_type phy_type; | ||
720 | spinlock_t phy_lock; | ||
721 | struct efx_phy_operations *phy_op; | ||
722 | void *phy_data; | ||
723 | struct mii_if_info mii; | ||
724 | |||
725 | int link_up; | ||
726 | unsigned int link_options; | ||
727 | unsigned int n_link_state_changes; | ||
728 | |||
729 | int promiscuous; | ||
730 | union efx_multicast_hash multicast_hash; | ||
731 | enum efx_fc_type flow_control; | ||
732 | struct work_struct reconfigure_work; | ||
733 | |||
734 | atomic_t rx_reset; | ||
735 | }; | ||
736 | |||
737 | /** | ||
738 | * struct efx_nic_type - Efx device type definition | ||
739 | * @mem_bar: Memory BAR number | ||
740 | * @mem_map_size: Memory BAR mapped size | ||
741 | * @txd_ptr_tbl_base: TX descriptor ring base address | ||
742 | * @rxd_ptr_tbl_base: RX descriptor ring base address | ||
743 | * @buf_tbl_base: Buffer table base address | ||
744 | * @evq_ptr_tbl_base: Event queue pointer table base address | ||
745 | * @evq_rptr_tbl_base: Event queue read-pointer table base address | ||
746 | * @txd_ring_mask: TX descriptor ring size - 1 (must be a power of two - 1) | ||
747 | * @rxd_ring_mask: RX descriptor ring size - 1 (must be a power of two - 1) | ||
748 | * @evq_size: Event queue size (must be a power of two) | ||
749 | * @max_dma_mask: Maximum possible DMA mask | ||
750 | * @tx_dma_mask: TX DMA mask | ||
751 | * @bug5391_mask: Address mask for bug 5391 workaround | ||
752 | * @rx_xoff_thresh: RX FIFO XOFF watermark (bytes) | ||
753 | * @rx_xon_thresh: RX FIFO XON watermark (bytes) | ||
754 | * @rx_buffer_padding: Padding added to each RX buffer | ||
755 | * @max_interrupt_mode: Highest capability interrupt mode supported | ||
756 | * from &enum efx_init_mode. | ||
757 | * @phys_addr_channels: Number of channels with physically addressed | ||
758 | * descriptors | ||
759 | */ | ||
760 | struct efx_nic_type { | ||
761 | unsigned int mem_bar; | ||
762 | unsigned int mem_map_size; | ||
763 | unsigned int txd_ptr_tbl_base; | ||
764 | unsigned int rxd_ptr_tbl_base; | ||
765 | unsigned int buf_tbl_base; | ||
766 | unsigned int evq_ptr_tbl_base; | ||
767 | unsigned int evq_rptr_tbl_base; | ||
768 | |||
769 | unsigned int txd_ring_mask; | ||
770 | unsigned int rxd_ring_mask; | ||
771 | unsigned int evq_size; | ||
772 | dma_addr_t max_dma_mask; | ||
773 | unsigned int tx_dma_mask; | ||
774 | unsigned bug5391_mask; | ||
775 | |||
776 | int rx_xoff_thresh; | ||
777 | int rx_xon_thresh; | ||
778 | unsigned int rx_buffer_padding; | ||
779 | unsigned int max_interrupt_mode; | ||
780 | unsigned int phys_addr_channels; | ||
781 | }; | ||
782 | |||
783 | /************************************************************************** | ||
784 | * | ||
785 | * Prototypes and inline functions | ||
786 | * | ||
787 | *************************************************************************/ | ||
788 | |||
789 | /* Iterate over all used channels */ | ||
790 | #define efx_for_each_channel(_channel, _efx) \ | ||
791 | for (_channel = &_efx->channel[0]; \ | ||
792 | _channel < &_efx->channel[EFX_MAX_CHANNELS]; \ | ||
793 | _channel++) \ | ||
794 | if (!_channel->used_flags) \ | ||
795 | continue; \ | ||
796 | else | ||
797 | |||
798 | /* Iterate over all used channels with interrupts */ | ||
799 | #define efx_for_each_channel_with_interrupt(_channel, _efx) \ | ||
800 | for (_channel = &_efx->channel[0]; \ | ||
801 | _channel < &_efx->channel[EFX_MAX_CHANNELS]; \ | ||
802 | _channel++) \ | ||
803 | if (!(_channel->used_flags && _channel->has_interrupt)) \ | ||
804 | continue; \ | ||
805 | else | ||
806 | |||
807 | /* Iterate over all used TX queues */ | ||
808 | #define efx_for_each_tx_queue(_tx_queue, _efx) \ | ||
809 | for (_tx_queue = &_efx->tx_queue[0]; \ | ||
810 | _tx_queue < &_efx->tx_queue[EFX_MAX_TX_QUEUES]; \ | ||
811 | _tx_queue++) \ | ||
812 | if (!_tx_queue->used) \ | ||
813 | continue; \ | ||
814 | else | ||
815 | |||
816 | /* Iterate over all TX queues belonging to a channel */ | ||
817 | #define efx_for_each_channel_tx_queue(_tx_queue, _channel) \ | ||
818 | for (_tx_queue = &_channel->efx->tx_queue[0]; \ | ||
819 | _tx_queue < &_channel->efx->tx_queue[EFX_MAX_TX_QUEUES]; \ | ||
820 | _tx_queue++) \ | ||
821 | if ((!_tx_queue->used) || \ | ||
822 | (_tx_queue->channel != _channel)) \ | ||
823 | continue; \ | ||
824 | else | ||
825 | |||
826 | /* Iterate over all used RX queues */ | ||
827 | #define efx_for_each_rx_queue(_rx_queue, _efx) \ | ||
828 | for (_rx_queue = &_efx->rx_queue[0]; \ | ||
829 | _rx_queue < &_efx->rx_queue[EFX_MAX_RX_QUEUES]; \ | ||
830 | _rx_queue++) \ | ||
831 | if (!_rx_queue->used) \ | ||
832 | continue; \ | ||
833 | else | ||
834 | |||
835 | /* Iterate over all RX queues belonging to a channel */ | ||
836 | #define efx_for_each_channel_rx_queue(_rx_queue, _channel) \ | ||
837 | for (_rx_queue = &_channel->efx->rx_queue[0]; \ | ||
838 | _rx_queue < &_channel->efx->rx_queue[EFX_MAX_RX_QUEUES]; \ | ||
839 | _rx_queue++) \ | ||
840 | if ((!_rx_queue->used) || \ | ||
841 | (_rx_queue->channel != _channel)) \ | ||
842 | continue; \ | ||
843 | else | ||
844 | |||
845 | /* Returns a pointer to the specified receive buffer in the RX | ||
846 | * descriptor queue. | ||
847 | */ | ||
848 | static inline struct efx_rx_buffer *efx_rx_buffer(struct efx_rx_queue *rx_queue, | ||
849 | unsigned int index) | ||
850 | { | ||
851 | return (&rx_queue->buffer[index]); | ||
852 | } | ||
853 | |||
854 | /* Set bit in a little-endian bitfield */ | ||
855 | static inline void set_bit_le(int nr, unsigned char *addr) | ||
856 | { | ||
857 | addr[nr / 8] |= (1 << (nr % 8)); | ||
858 | } | ||
859 | |||
860 | /* Clear bit in a little-endian bitfield */ | ||
861 | static inline void clear_bit_le(int nr, unsigned char *addr) | ||
862 | { | ||
863 | addr[nr / 8] &= ~(1 << (nr % 8)); | ||
864 | } | ||
865 | |||
866 | |||
867 | /** | ||
868 | * EFX_MAX_FRAME_LEN - calculate maximum frame length | ||
869 | * | ||
870 | * This calculates the maximum frame length that will be used for a | ||
871 | * given MTU. The frame length will be equal to the MTU plus a | ||
872 | * constant amount of header space and padding. This is the quantity | ||
873 | * that the net driver will program into the MAC as the maximum frame | ||
874 | * length. | ||
875 | * | ||
876 | * The 10G MAC used in Falcon requires 8-byte alignment on the frame | ||
877 | * length, so we round up to the nearest 8. | ||
878 | */ | ||
879 | #define EFX_MAX_FRAME_LEN(mtu) \ | ||
880 | ((((mtu) + ETH_HLEN + VLAN_HLEN + 4/* FCS */) + 7) & ~7) | ||
881 | |||
882 | |||
883 | #endif /* EFX_NET_DRIVER_H */ | ||