1 files changed, 178 insertions, 16 deletions

diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 67e0a65fc28c..644d71bfb640 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3375,6 +3375,9 @@ static void s2io_reset(struct s2io_nic * sp)
         /* Set swapper to enable I/O register access */
         s2io_set_swapper(sp);
 
+        /* restore mac_addr entries */
+        do_s2io_restore_unicast_mc(sp);
+
         /* Restore the MSIX table entries from local variables */
         restore_xmsi_data(sp);
 
@@ -3433,9 +3436,6 @@ static void s2io_reset(struct s2io_nic * sp)
                 writeq(val64, &bar0->pcc_err_reg);
         }
 
-        /* restore the previously assigned mac address */
-        do_s2io_prog_unicast(sp->dev, (u8 *)&sp->def_mac_addr[0].mac_addr);
-
         sp->device_enabled_once = FALSE;
 }
 
@@ -3920,6 +3920,9 @@ hw_init_failed:
 static int s2io_close(struct net_device *dev)
 {
         struct s2io_nic *sp = dev->priv;
+        struct config_param *config = &sp->config;
+        u64 tmp64;
+        int offset;
 
         /* Return if the device is already closed               *
         *  Can happen when s2io_card_up failed in change_mtu    *
@@ -3928,6 +3931,14 @@ static int s2io_close(struct net_device *dev)
                 return 0;
 
         netif_stop_queue(dev);
+
+        /* delete all populated mac entries */
+        for (offset = 1; offset < config->max_mc_addr; offset++) {
+                tmp64 = do_s2io_read_unicast_mc(sp, offset);
+                if (tmp64 != S2IO_DISABLE_MAC_ENTRY)
+                        do_s2io_delete_unicast_mc(sp, tmp64);
+        }
+
         /* Reset card, kill tasklet and free Tx and Rx buffers. */
         s2io_card_down(sp);
 
@@ -4728,8 +4739,9 @@ static void s2io_set_multicast(struct net_device *dev)
         struct XENA_dev_config __iomem *bar0 = sp->bar0;
         u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
             0xfeffffffffffULL;
-        u64 dis_addr = 0xffffffffffffULL, mac_addr = 0;
+        u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, mac_addr = 0;
         void __iomem *add;
+        struct config_param *config = &sp->config;
 
         if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) {
                 /*  Enable all Multicast addresses */
@@ -4739,7 +4751,7 @@ static void s2io_set_multicast(struct net_device *dev)
                        &bar0->rmac_addr_data1_mem);
                 val64 = RMAC_ADDR_CMD_MEM_WE |
                     RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
-                    RMAC_ADDR_CMD_MEM_OFFSET(MAC_MC_ALL_MC_ADDR_OFFSET);
+                    RMAC_ADDR_CMD_MEM_OFFSET(config->max_mc_addr - 1);
                 writeq(val64, &bar0->rmac_addr_cmd_mem);
                 /* Wait till command completes */
                 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
@@ -4747,7 +4759,7 @@ static void s2io_set_multicast(struct net_device *dev)
                                         S2IO_BIT_RESET);
 
                 sp->m_cast_flg = 1;
-                sp->all_multi_pos = MAC_MC_ALL_MC_ADDR_OFFSET;
+                sp->all_multi_pos = config->max_mc_addr - 1;
         } else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) {
                 /*  Disable all Multicast addresses */
                 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
@@ -4816,7 +4828,7 @@ static void s2io_set_multicast(struct net_device *dev)
         /*  Update individual M_CAST address list */
         if ((!sp->m_cast_flg) && dev->mc_count) {
                 if (dev->mc_count >
-                    (MAX_ADDRS_SUPPORTED - MAC_MC_ADDR_START_OFFSET - 1)) {
+                    (config->max_mc_addr - config->max_mac_addr)) {
                         DBG_PRINT(ERR_DBG, "%s: No more Rx filters ",
                                   dev->name);
                         DBG_PRINT(ERR_DBG, "can be added, please enable ");
@@ -4836,7 +4848,7 @@ static void s2io_set_multicast(struct net_device *dev)
                         val64 = RMAC_ADDR_CMD_MEM_WE |
                             RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
                             RMAC_ADDR_CMD_MEM_OFFSET
-                            (MAC_MC_ADDR_START_OFFSET + i);
+                            (config->mc_start_offset + i);
                         writeq(val64, &bar0->rmac_addr_cmd_mem);
 
                         /* Wait for command completes */
@@ -4868,7 +4880,7 @@ static void s2io_set_multicast(struct net_device *dev)
                         val64 = RMAC_ADDR_CMD_MEM_WE |
                             RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
                             RMAC_ADDR_CMD_MEM_OFFSET
-                            (i + MAC_MC_ADDR_START_OFFSET);
+                            (i + config->mc_start_offset);
                         writeq(val64, &bar0->rmac_addr_cmd_mem);
 
                         /* Wait for command completes */
@@ -4884,8 +4896,78 @@ static void s2io_set_multicast(struct net_device *dev)
         }
 }
 
-/* add unicast MAC address to CAM */
-static int do_s2io_add_unicast(struct s2io_nic *sp, u64 addr, int off)
+/* read from CAM unicast & multicast addresses and store it in
+ * def_mac_addr structure
+ */
+void do_s2io_store_unicast_mc(struct s2io_nic *sp)
+{
+        int offset;
+        u64 mac_addr = 0x0;
+        struct config_param *config = &sp->config;
+
+        /* store unicast & multicast mac addresses */
+        for (offset = 0; offset < config->max_mc_addr; offset++) {
+                mac_addr = do_s2io_read_unicast_mc(sp, offset);
+                /* if read fails disable the entry */
+                if (mac_addr == FAILURE)
+                        mac_addr = S2IO_DISABLE_MAC_ENTRY;
+                do_s2io_copy_mac_addr(sp, offset, mac_addr);
+        }
+}
+
+/* restore unicast & multicast MAC to CAM from def_mac_addr structure */
+static void do_s2io_restore_unicast_mc(struct s2io_nic *sp)
+{
+        int offset;
+        struct config_param *config = &sp->config;
+        /* restore unicast mac address */
+        for (offset = 0; offset < config->max_mac_addr; offset++)
+                do_s2io_prog_unicast(sp->dev,
+                        sp->def_mac_addr[offset].mac_addr);
+
+        /* restore multicast mac address */
+        for (offset = config->mc_start_offset;
+                offset < config->max_mc_addr; offset++)
+                do_s2io_add_mc(sp, sp->def_mac_addr[offset].mac_addr);
+}
+
+/* add a multicast MAC address to CAM */
+static int do_s2io_add_mc(struct s2io_nic *sp, u8 *addr)
+{
+        int i;
+        u64 mac_addr = 0;
+        struct config_param *config = &sp->config;
+
+        for (i = 0; i < ETH_ALEN; i++) {
+                mac_addr <<= 8;
+                mac_addr |= addr[i];
+        }
+        if ((0ULL == mac_addr) || (mac_addr == S2IO_DISABLE_MAC_ENTRY))
+                return SUCCESS;
+
+        /* check if the multicast mac already preset in CAM */
+        for (i = config->mc_start_offset; i < config->max_mc_addr; i++) {
+                u64 tmp64;
+                tmp64 = do_s2io_read_unicast_mc(sp, i);
+                if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
+                        break;
+
+                if (tmp64 == mac_addr)
+                        return SUCCESS;
+        }
+        if (i == config->max_mc_addr) {
+                DBG_PRINT(ERR_DBG,
+                        "CAM full no space left for multicast MAC\n");
+                return FAILURE;
+        }
+        /* Update the internal structure with this new mac address */
+        do_s2io_copy_mac_addr(sp, i, mac_addr);
+
+        return (do_s2io_add_mac(sp, mac_addr, i));
+}
+
+/* add MAC address to CAM */
+static int do_s2io_add_mac(struct s2io_nic *sp, u64 addr, int off)
 {
         u64 val64;
         struct XENA_dev_config __iomem *bar0 = sp->bar0;
@@ -4902,15 +4984,62 @@ static int do_s2io_add_unicast(struct s2io_nic *sp, u64 addr, int off)
         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
                 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
                 S2IO_BIT_RESET)) {
-                DBG_PRINT(INFO_DBG, "add_mac_addr failed\n");
+                DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n");
                 return FAILURE;
         }
         return SUCCESS;
 }
+/* deletes a specified unicast/multicast mac entry from CAM */
+static int do_s2io_delete_unicast_mc(struct s2io_nic *sp, u64 addr)
+{
+        int offset;
+        u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, tmp64;
+        struct config_param *config = &sp->config;
+
+        for (offset = 1;
+                offset < config->max_mc_addr; offset++) {
+                tmp64 = do_s2io_read_unicast_mc(sp, offset);
+                if (tmp64 == addr) {
+                        /* disable the entry by writing  0xffffffffffffULL */
+                        if (do_s2io_add_mac(sp, dis_addr, offset) ==  FAILURE)
+                                return FAILURE;
+                        /* store the new mac list from CAM */
+                        do_s2io_store_unicast_mc(sp);
+                        return SUCCESS;
+                }
+        }
+        DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",
+                        (unsigned long long)addr);
+        return FAILURE;
+}
+
+/* read mac entries from CAM */
+static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset)
+{
+        u64 tmp64 = 0xffffffffffff0000ULL, val64;
+        struct XENA_dev_config __iomem *bar0 = sp->bar0;
+
+        /* read mac addr */
+        val64 =
+                RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
+                RMAC_ADDR_CMD_MEM_OFFSET(offset);
+        writeq(val64, &bar0->rmac_addr_cmd_mem);
+
+        /* Wait till command completes */
+        if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
+                RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
+                S2IO_BIT_RESET)) {
+                DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n");
+                return FAILURE;
+        }
+        tmp64 = readq(&bar0->rmac_addr_data0_mem);
+        return (tmp64 >> 16);
+}
 
 /**
  * s2io_set_mac_addr driver entry point
  */
+
 static int s2io_set_mac_addr(struct net_device *dev, void *p)
 {
         struct sockaddr *addr = p;
@@ -4923,7 +5052,6 @@ static int s2io_set_mac_addr(struct net_device *dev, void *p)
         /* store the MAC address in CAM */
         return (do_s2io_prog_unicast(dev, dev->dev_addr));
 }
-
 /**
  *  do_s2io_prog_unicast - Programs the Xframe mac address
  *  @dev : pointer to the device structure.
@@ -4933,11 +5061,14 @@ static int s2io_set_mac_addr(struct net_device *dev, void *p)
  *  Return value: SUCCESS on success and an appropriate (-)ve integer
  *  as defined in errno.h file on failure.
  */
+
 static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
 {
         struct s2io_nic *sp = dev->priv;
         register u64 mac_addr = 0, perm_addr = 0;
         int i;
+        u64 tmp64;
+        struct config_param *config = &sp->config;
 
         /*
         * Set the new MAC address as the new unicast filter and reflect this
@@ -4955,9 +5086,26 @@ static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
         if (mac_addr == perm_addr)
                 return SUCCESS;
 
+        /* check if the mac already preset in CAM */
+        for (i = 1; i < config->max_mac_addr; i++) {
+                tmp64 = do_s2io_read_unicast_mc(sp, i);
+                if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
+                        break;
+
+                if (tmp64 == mac_addr) {
+                        DBG_PRINT(INFO_DBG,
+                        "MAC addr:0x%llx already present in CAM\n",
+                        (unsigned long long)mac_addr);
+                        return SUCCESS;
+                }
+        }
+        if (i == config->max_mac_addr) {
+                DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");
+                return FAILURE;
+        }
         /* Update the internal structure with this new mac address */
-        do_s2io_copy_mac_addr(sp, 0, mac_addr);
-        return (do_s2io_add_unicast(sp, mac_addr, 0));
+        do_s2io_copy_mac_addr(sp, i, mac_addr);
+        return (do_s2io_add_mac(sp, mac_addr, i));
 }
 
 /**
@@ -7651,7 +7799,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
          */
         bar0 = sp->bar0;
         val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
-            RMAC_ADDR_CMD_MEM_OFFSET(0 + MAC_MAC_ADDR_START_OFFSET);
+            RMAC_ADDR_CMD_MEM_OFFSET(0 + S2IO_MAC_ADDR_START_OFFSET);
         writeq(val64, &bar0->rmac_addr_cmd_mem);
         wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
                       RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, S2IO_BIT_RESET);
@@ -7671,6 +7819,20 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
         memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
         memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
 
+        /* initialize number of multicast & unicast MAC entries variables */
+        if (sp->device_type == XFRAME_I_DEVICE) {
+                config->max_mc_addr = S2IO_XENA_MAX_MC_ADDRESSES;
+                config->max_mac_addr = S2IO_XENA_MAX_MAC_ADDRESSES;
+                config->mc_start_offset = S2IO_XENA_MC_ADDR_START_OFFSET;
+        } else if (sp->device_type == XFRAME_II_DEVICE) {
+                config->max_mc_addr = S2IO_HERC_MAX_MC_ADDRESSES;
+                config->max_mac_addr = S2IO_HERC_MAX_MAC_ADDRESSES;
+                config->mc_start_offset = S2IO_HERC_MC_ADDR_START_OFFSET;
+        }
+
+        /* store mac addresses from CAM to s2io_nic structure */
+        do_s2io_store_unicast_mc(sp);
+
          /* Store the values of the MSIX table in the s2io_nic structure */
         store_xmsi_data(sp);
         /* reset Nic and bring it to known state */