1 files changed, 69 insertions, 0 deletions

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 9551cbb7bf01..d571d101de08 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -108,6 +108,8 @@ static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = {
          board_82599 },
         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4),
          board_82599 },
+        {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_T3_LOM),
+         board_82599 },
         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE),
          board_82599 },
 
@@ -1618,6 +1620,48 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
         }
 }
 
+/**
+ * ixgbe_check_overtemp_task - worker thread to check over tempurature
+ * @work: pointer to work_struct containing our data
+ **/
+static void ixgbe_check_overtemp_task(struct work_struct *work)
+{
+        struct ixgbe_adapter *adapter = container_of(work,
+                                                     struct ixgbe_adapter,
+                                                     check_overtemp_task);
+        struct ixgbe_hw *hw = &adapter->hw;
+        u32 eicr = adapter->interrupt_event;
+
+        if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) {
+                switch (hw->device_id) {
+                case IXGBE_DEV_ID_82599_T3_LOM: {
+                        u32 autoneg;
+                        bool link_up = false;
+
+                        if (hw->mac.ops.check_link)
+                                hw->mac.ops.check_link(hw, &autoneg, &link_up, false);
+
+                        if (((eicr & IXGBE_EICR_GPI_SDP0) && (!link_up)) ||
+                            (eicr & IXGBE_EICR_LSC))
+                                /* Check if this is due to overtemp */
+                                if (hw->phy.ops.check_overtemp(hw) == IXGBE_ERR_OVERTEMP)
+                                        break;
+                        }
+                        return;
+                default:
+                        if (!(eicr & IXGBE_EICR_GPI_SDP0))
+                                return;
+                        break;
+                }
+                DPRINTK(DRV, ERR, "Network adapter has been stopped because it "
+                        "has over heated. Restart the computer. If the problem "
+                        "persists, power off the system and replace the "
+                        "adapter\n");
+                /* write to clear the interrupt */
+                IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP0);
+        }
+}
+
 static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr)
 {
         struct ixgbe_hw *hw = &adapter->hw;
@@ -1689,6 +1733,10 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
 
         if (hw->mac.type == ixgbe_mac_82599EB) {
                 ixgbe_check_sfp_event(adapter, eicr);
+                adapter->interrupt_event = eicr;
+                if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
+                    ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC)))
+                        schedule_work(&adapter->check_overtemp_task);
 
                 /* Handle Flow Director Full threshold interrupt */
                 if (eicr & IXGBE_EICR_FLOW_DIR) {
@@ -2190,6 +2238,8 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
         u32 mask;
 
         mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
+        if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
+                mask |= IXGBE_EIMS_GPI_SDP0;
         if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
                 mask |= IXGBE_EIMS_GPI_SDP1;
         if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
@@ -2250,6 +2300,9 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
                 ixgbe_check_sfp_event(adapter, eicr);
 
         ixgbe_check_fan_failure(adapter, eicr);
+        if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
+            ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC)))
+                schedule_work(&adapter->check_overtemp_task);
 
         if (napi_schedule_prep(&(q_vector->napi))) {
                 adapter->tx_ring[0]->total_packets = 0;
@@ -3265,6 +3318,13 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
                 IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
         }
 
+        /* Enable Thermal over heat sensor interrupt */
+        if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) {
+                gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
+                gpie |= IXGBE_SDP0_GPIEN;
+                IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
+        }
+
         /* Enable fan failure interrupt if media type is copper */
         if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
                 gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
@@ -3666,6 +3726,9 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
             adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
                 cancel_work_sync(&adapter->fdir_reinit_task);
 
+        if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
+                cancel_work_sync(&adapter->check_overtemp_task);
+
         /* disable transmits in the hardware now that interrupts are off */
         for (i = 0; i < adapter->num_tx_queues; i++) {
                 j = adapter->tx_ring[i]->reg_idx;
@@ -4645,6 +4708,8 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
                 adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
                 adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
                 adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
+                if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM)
+                        adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE;
                 if (dev->features & NETIF_F_NTUPLE) {
                         /* Flow Director perfect filter enabled */
                         adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
@@ -6561,7 +6626,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
         }
 
         /* reset_hw fills in the perm_addr as well */
+        hw->phy.reset_if_overtemp = true;
         err = hw->mac.ops.reset_hw(hw);
+        hw->phy.reset_if_overtemp = false;
         if (err == IXGBE_ERR_SFP_NOT_PRESENT &&
             hw->mac.type == ixgbe_mac_82598EB) {
                 /*
@@ -6730,6 +6797,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
             adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
                 INIT_WORK(&adapter->fdir_reinit_task, ixgbe_fdir_reinit_task);
 
+        if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
+                INIT_WORK(&adapter->check_overtemp_task, ixgbe_check_overtemp_task);
 #ifdef CONFIG_IXGBE_DCA
         if (dca_add_requester(&pdev->dev) == 0) {
                 adapter->flags |= IXGBE_FLAG_DCA_ENABLED;