1 files changed, 66 insertions, 1 deletions

diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index ed0bb3b20255..1c227b0777a6 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -50,6 +50,51 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
                                        u8 *eeprom_data);
 
 /**
+ *  ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
+ *  @hw: pointer to the HW structure
+ *
+ *  The defaults for 82598 should be in the range of 50us to 50ms,
+ *  however the hardware default for these parts is 500us to 1ms which is less
+ *  than the 10ms recommended by the pci-e spec.  To address this we need to
+ *  increase the value to either 10ms to 250ms for capability version 1 config,
+ *  or 16ms to 55ms for version 2.
+ **/
+void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
+{
+        struct ixgbe_adapter *adapter = hw->back;
+        u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
+        u16 pcie_devctl2;
+
+        /* only take action if timeout value is defaulted to 0 */
+        if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
+                goto out;
+
+        /*
+         * if capababilities version is type 1 we can write the
+         * timeout of 10ms to 250ms through the GCR register
+         */
+        if (!(gcr & IXGBE_GCR_CAP_VER2)) {
+                gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
+                goto out;
+        }
+
+        /*
+         * for version 2 capabilities we need to write the config space
+         * directly in order to set the completion timeout value for
+         * 16ms to 55ms
+         */
+        pci_read_config_word(adapter->pdev,
+                             IXGBE_PCI_DEVICE_CONTROL2, &pcie_devctl2);
+        pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
+        pci_write_config_word(adapter->pdev,
+                              IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
+out:
+        /* disable completion timeout resend */
+        gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
+        IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
+}
+
+/**
  *  ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count
  *  @hw: pointer to hardware structure
  *
@@ -153,6 +198,26 @@ out:
 }
 
 /**
+ *  ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware using the generic start_hw function.
+ *  Then set pcie completion timeout
+ **/
+s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
+{
+        s32 ret_val = 0;
+
+        ret_val = ixgbe_start_hw_generic(hw);
+
+        /* set the completion timeout for interface */
+        if (ret_val == 0)
+                ixgbe_set_pcie_completion_timeout(hw);
+
+        return ret_val;
+}
+
+/**
  *  ixgbe_get_link_capabilities_82598 - Determines link capabilities
  *  @hw: pointer to hardware structure
  *  @speed: pointer to link speed
@@ -1086,7 +1151,7 @@ out:
 static struct ixgbe_mac_operations mac_ops_82598 = {
         .init_hw                = &ixgbe_init_hw_generic,
         .reset_hw               = &ixgbe_reset_hw_82598,
-        .start_hw               = &ixgbe_start_hw_generic,
+        .start_hw               = &ixgbe_start_hw_82598,
         .clear_hw_cntrs         = &ixgbe_clear_hw_cntrs_generic,
         .get_media_type         = &ixgbe_get_media_type_82598,
         .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,