3 files changed, 836 insertions, 0 deletions

diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 2098d0af8ff5..cfa7b8835d3d 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -162,7 +162,19 @@ config EP7211_DONGLE
           Say Y here if you want to build support for the Cirrus logic
           EP7211 chipset's infrared module.
 
+config KSDAZZLE_DONGLE
+        tristate "KingSun Dazzle IrDA-USB dongle (EXPERIMENTAL)"
+        depends on IRDA && USB && EXPERIMENTAL
+        help
+          Say Y or M here if you want to build support for the KingSun Dazzle
+          IrDA-USB bridge device driver.
+
+          This USB bridge does not conform to the IrDA-USB device class
+          specification, and therefore needs its own specific driver. This
+          dongle supports SIR speeds only (9600 through 115200 bps).
 
+          To compile it as a module, choose M here: the module will be called
+          ksdazzle-sir.
 
 comment "Old SIR device drivers"
 
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index 2808ef5c7b79..e19da3b919a2 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_MA600_DONGLE)	+= ma600-sir.o
 obj-$(CONFIG_TOIM3232_DONGLE)   += toim3232-sir.o
 obj-$(CONFIG_EP7211_DONGLE)     += ep7211-sir.o
 obj-$(CONFIG_KINGSUN_DONGLE)    += kingsun-sir.o
+obj-$(CONFIG_KSDAZZLE_DONGLE)   += ksdazzle-sir.o
 
 # The SIR helper module
 sir-dev-objs := sir_dev.o sir_dongle.o
diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c
new file mode 100644
index 000000000000..12b0e7a15bef
--- /dev/null
+++ b/drivers/net/irda/ksdazzle-sir.c
@@ -0,0 +1,823 @@
+/*****************************************************************************
+*
+* Filename:      ksdazzle.c
+* Version:       0.1.1
+* Description:   Irda KingSun Dazzle USB Dongle
+* Status:        Experimental
+* Author:        Alex Villacís Lasso <a_villacis@palosanto.com>
+*
+*    Based on stir4200, mcs7780, kingsun-sir drivers.
+*
+*    This program is free software; you can redistribute it and/or modify
+*    it under the terms of the GNU General Public License as published by
+*    the Free Software Foundation; either version 2 of the License.
+*
+*    This program is distributed in the hope that it will be useful,
+*    but WITHOUT ANY WARRANTY; without even the implied warranty of
+*    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+*    GNU General Public License for more details.
+*
+*    You should have received a copy of the GNU General Public License
+*    along with this program; if not, write to the Free Software
+*    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+*****************************************************************************/
+
+/*
+ * Following is my most current (2007-07-26) understanding of how the Kingsun
+ * 07D0:4100 dongle (sometimes known as the MA-660) is supposed to work. This
+ * information was deduced by examining the USB traffic captured with USBSnoopy
+ * from the WinXP driver. Feel free to update here as more of the dongle is
+ * known.
+ *
+ * General: This dongle exposes one interface with two interrupt endpoints, one
+ * IN and one OUT. In this regard, it is similar to what the Kingsun/Donshine
+ * dongle (07c0:4200) exposes. Traffic is raw and needs to be wrapped and
+ * unwrapped manually as in stir4200, kingsun-sir, and ks959-sir.
+ *
+ * Transmission: To transmit an IrDA frame, it is necessary to wrap it, then
+ * split it into multiple segments of up to 7 bytes each, and transmit each in
+ * sequence. It seems that sending a single big block (like kingsun-sir does)
+ * won't work with this dongle. Each segment needs to be prefixed with a value
+ * equal to (unsigned char)0xF8 + <number of bytes in segment>, inside a payload
+ * of exactly 8 bytes. For example, a segment of 1 byte gets prefixed by 0xF9,
+ * and one of 7 bytes gets prefixed by 0xFF. The bytes at the end of the
+ * payload, not considered by the prefix, are ignored (set to 0 by this
+ * implementation).
+ *
+ * Reception: To receive data, the driver must poll the dongle regularly (like
+ * kingsun-sir.c) with interrupt URBs. If data is available, it will be returned
+ * in payloads from 0 to 8 bytes long. When concatenated, these payloads form
+ * a raw IrDA stream that needs to be unwrapped as in stir4200 and kingsun-sir
+ *
+ * Speed change: To change the speed of the dongle, the driver prepares a
+ * control URB with the following as a setup packet:
+ *    bRequestType    USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE
+ *    bRequest        0x09
+ *    wValue          0x0200
+ *    wIndex          0x0001
+ *    wLength         0x0008 (length of the payload)
+ * The payload is a 8-byte record, apparently identical to the one used in
+ * drivers/usb/serial/cypress_m8.c to change speed:
+ *     __u32 baudSpeed;
+ *    unsigned int dataBits : 2;    // 0 - 5 bits 3 - 8 bits
+ *    unsigned int : 1;
+ *    unsigned int stopBits : 1;
+ *    unsigned int parityEnable : 1;
+ *    unsigned int parityType : 1;
+ *    unsigned int : 1;
+ *    unsigned int reset : 1;
+ *    unsigned char reserved[3];    // set to 0
+ *
+ * For now only SIR speeds have been observed with this dongle. Therefore,
+ * nothing is known on what changes (if any) must be done to frame wrapping /
+ * unwrapping for higher than SIR speeds. This driver assumes no change is
+ * necessary and announces support for all the way to 115200 bps.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/crc32.h>
+
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/crc.h>
+
+#define KSDAZZLE_VENDOR_ID 0x07d0
+#define KSDAZZLE_PRODUCT_ID 0x4100
+
+/* These are the currently known USB ids */
+static struct usb_device_id dongles[] = {
+        /* KingSun Co,Ltd  IrDA/USB Bridge */
+        {USB_DEVICE(KSDAZZLE_VENDOR_ID, KSDAZZLE_PRODUCT_ID)},
+        {}
+};
+
+MODULE_DEVICE_TABLE(usb, dongles);
+
+#define KINGSUN_MTT 0x07
+#define KINGSUN_REQ_RECV 0x01
+#define KINGSUN_REQ_SEND 0x09
+
+#define KINGSUN_SND_FIFO_SIZE    2048   /* Max packet we can send */
+
+struct ksdazzle_speedparams {
+        __le32 baudrate;        /* baud rate, little endian */
+        __u8 flags;
+        __u8 reserved[3];
+} __attribute__ ((packed));
+
+#define KS_DATA_5_BITS 0x00
+#define KS_DATA_6_BITS 0x01
+#define KS_DATA_7_BITS 0x02
+#define KS_DATA_8_BITS 0x03
+
+#define KS_STOP_BITS_1 0x00
+#define KS_STOP_BITS_2 0x08
+
+#define KS_PAR_DISABLE    0x00
+#define KS_PAR_EVEN    0x10
+#define KS_PAR_ODD    0x30
+#define KS_RESET    0x80
+
+#define KINGSUN_EP_IN                   0
+#define KINGSUN_EP_OUT                  1
+
+struct ksdazzle_cb {
+        struct usb_device *usbdev;      /* init: probe_irda */
+        struct net_device *netdev;      /* network layer */
+        struct irlap_cb *irlap; /* The link layer we are binded to */
+        struct net_device_stats stats;  /* network statistics */
+        struct qos_info qos;
+
+        struct urb *tx_urb;
+        __u8 *tx_buf_clear;
+        unsigned int tx_buf_clear_used;
+        unsigned int tx_buf_clear_sent;
+        __u8 tx_payload[8];
+
+        struct urb *rx_urb;
+        __u8 rx_payload[8];
+        iobuff_t rx_unwrap_buff;
+
+        struct usb_ctrlrequest *speed_setuprequest;
+        struct urb *speed_urb;
+        struct ksdazzle_speedparams speedparams;
+        unsigned int new_speed;
+
+        __u8 ep_in;
+        __u8 ep_out;
+
+        spinlock_t lock;
+        int receiving;
+};
+
+/* Callback transmission routine */
+static void ksdazzle_speed_irq(struct urb *urb)
+{
+        /* unlink, shutdown, unplug, other nasties */
+        if (urb->status != 0) {
+                err("ksdazzle_speed_irq: urb asynchronously failed - %d",
+                    urb->status);
+        }
+}
+
+/* Send a control request to change speed of the dongle */
+static int ksdazzle_change_speed(struct ksdazzle_cb *kingsun, unsigned speed)
+{
+        static unsigned int supported_speeds[] = { 2400, 9600, 19200, 38400,
+                57600, 115200, 576000, 1152000, 4000000, 0
+        };
+        int err;
+        unsigned int i;
+
+        if (kingsun->speed_setuprequest == NULL || kingsun->speed_urb == NULL)
+                return -ENOMEM;
+
+        /* Check that requested speed is among the supported ones */
+        for (i = 0; supported_speeds[i] && supported_speeds[i] != speed; i++) ;
+        if (supported_speeds[i] == 0)
+                return -EOPNOTSUPP;
+
+        memset(&(kingsun->speedparams), 0, sizeof(struct ksdazzle_speedparams));
+        kingsun->speedparams.baudrate = cpu_to_le32(speed);
+        kingsun->speedparams.flags = KS_DATA_8_BITS;
+
+        /* speed_setuprequest pre-filled in ksdazzle_probe */
+        usb_fill_control_urb(kingsun->speed_urb, kingsun->usbdev,
+                             usb_sndctrlpipe(kingsun->usbdev, 0),
+                             (unsigned char *)kingsun->speed_setuprequest,
+                             &(kingsun->speedparams),
+                             sizeof(struct ksdazzle_speedparams),
+                             ksdazzle_speed_irq, kingsun);
+        kingsun->speed_urb->status = 0;
+        err = usb_submit_urb(kingsun->speed_urb, GFP_ATOMIC);
+
+        return err;
+}
+
+/* Submit one fragment of an IrDA frame to the dongle */
+static void ksdazzle_send_irq(struct urb *urb);
+static int ksdazzle_submit_tx_fragment(struct ksdazzle_cb *kingsun)
+{
+        unsigned int wraplen;
+        int ret;
+
+        /* We can send at most 7 bytes of payload at a time */
+        wraplen = 7;
+        if (wraplen > kingsun->tx_buf_clear_used)
+                wraplen = kingsun->tx_buf_clear_used;
+
+        /* Prepare payload prefix with used length */
+        memset(kingsun->tx_payload, 0, 8);
+        kingsun->tx_payload[0] = (unsigned char)0xf8 + wraplen;
+        memcpy(kingsun->tx_payload + 1, kingsun->tx_buf_clear, wraplen);
+
+        usb_fill_int_urb(kingsun->tx_urb, kingsun->usbdev,
+                         usb_sndintpipe(kingsun->usbdev, kingsun->ep_out),
+                         kingsun->tx_payload, 8, ksdazzle_send_irq, kingsun, 1);
+        kingsun->tx_urb->status = 0;
+        ret = usb_submit_urb(kingsun->tx_urb, GFP_ATOMIC);
+
+        /* Remember how much data was sent, in order to update at callback */
+        kingsun->tx_buf_clear_sent = (ret == 0) ? wraplen : 0;
+        return ret;
+}
+
+/* Callback transmission routine */
+static void ksdazzle_send_irq(struct urb *urb)
+{
+        struct ksdazzle_cb *kingsun = urb->context;
+        struct net_device *netdev = kingsun->netdev;
+        int ret = 0;
+
+        /* in process of stopping, just drop data */
+        if (!netif_running(kingsun->netdev)) {
+                err("ksdazzle_send_irq: Network not running!");
+                return;
+        }
+
+        /* unlink, shutdown, unplug, other nasties */
+        if (urb->status != 0) {
+                err("ksdazzle_send_irq: urb asynchronously failed - %d",
+                    urb->status);
+                return;
+        }
+
+        if (kingsun->tx_buf_clear_used > 0) {
+                /* Update data remaining to be sent */
+                if (kingsun->tx_buf_clear_sent < kingsun->tx_buf_clear_used) {
+                        memmove(kingsun->tx_buf_clear,
+                                kingsun->tx_buf_clear +
+                                kingsun->tx_buf_clear_sent,
+                                kingsun->tx_buf_clear_used -
+                                kingsun->tx_buf_clear_sent);
+                }
+                kingsun->tx_buf_clear_used -= kingsun->tx_buf_clear_sent;
+                kingsun->tx_buf_clear_sent = 0;
+
+                if (kingsun->tx_buf_clear_used > 0) {
+                        /* There is more data to be sent */
+                        if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) {
+                                err("ksdazzle_send_irq: failed tx_urb submit: %d", ret);
+                                switch (ret) {
+                                case -ENODEV:
+                                case -EPIPE:
+                                        break;
+                                default:
+                                        kingsun->stats.tx_errors++;
+                                        netif_start_queue(netdev);
+                                }
+                        }
+                } else {
+                        /* All data sent, send next speed && wake network queue */
+                        if (kingsun->new_speed != -1 &&
+                            cpu_to_le32(kingsun->new_speed) !=
+                            kingsun->speedparams.baudrate)
+                                ksdazzle_change_speed(kingsun,
+                                                      kingsun->new_speed);
+
+                        netif_wake_queue(netdev);
+                }
+        }
+}
+
+/*
+ * Called from net/core when new frame is available.
+ */
+static int ksdazzle_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+        struct ksdazzle_cb *kingsun;
+        unsigned int wraplen;
+        int ret = 0;
+
+        if (skb == NULL || netdev == NULL)
+                return -EINVAL;
+
+        netif_stop_queue(netdev);
+
+        /* the IRDA wrapping routines don't deal with non linear skb */
+        SKB_LINEAR_ASSERT(skb);
+
+        kingsun = netdev_priv(netdev);
+
+        spin_lock(&kingsun->lock);
+        kingsun->new_speed = irda_get_next_speed(skb);
+
+        /* Append data to the end of whatever data remains to be transmitted */
+        wraplen =
+            async_wrap_skb(skb, kingsun->tx_buf_clear, KINGSUN_SND_FIFO_SIZE);
+        kingsun->tx_buf_clear_used = wraplen;
+
+        if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) {
+                err("ksdazzle_hard_xmit: failed tx_urb submit: %d", ret);
+                switch (ret) {
+                case -ENODEV:
+                case -EPIPE:
+                        break;
+                default:
+                        kingsun->stats.tx_errors++;
+                        netif_start_queue(netdev);
+                }
+        } else {
+                kingsun->stats.tx_packets++;
+                kingsun->stats.tx_bytes += skb->len;
+
+        }
+
+        dev_kfree_skb(skb);
+        spin_unlock(&kingsun->lock);
+
+        return ret;
+}
+
+/* Receive callback function */
+static void ksdazzle_rcv_irq(struct urb *urb)
+{
+        struct ksdazzle_cb *kingsun = urb->context;
+
+        /* in process of stopping, just drop data */
+        if (!netif_running(kingsun->netdev)) {
+                kingsun->receiving = 0;
+                return;
+        }
+
+        /* unlink, shutdown, unplug, other nasties */
+        if (urb->status != 0) {
+                err("ksdazzle_rcv_irq: urb asynchronously failed - %d",
+                    urb->status);
+                kingsun->receiving = 0;
+                return;
+        }
+
+        if (urb->actual_length > 0) {
+                __u8 *bytes = urb->transfer_buffer;
+                unsigned int i;
+
+                for (i = 0; i < urb->actual_length; i++) {
+                        async_unwrap_char(kingsun->netdev, &kingsun->stats,
+                                          &kingsun->rx_unwrap_buff, bytes[i]);
+                }
+                kingsun->netdev->last_rx = jiffies;
+                kingsun->receiving =
+                    (kingsun->rx_unwrap_buff.state != OUTSIDE_FRAME) ? 1 : 0;
+        }
+
+        /* This urb has already been filled in ksdazzle_net_open. It is assumed that
+           urb keeps the pointer to the payload buffer.
+         */
+        urb->status = 0;
+        usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+/*
+ * Function ksdazzle_net_open (dev)
+ *
+ *    Network device is taken up. Usually this is done by "ifconfig irda0 up"
+ */
+static int ksdazzle_net_open(struct net_device *netdev)
+{
+        struct ksdazzle_cb *kingsun = netdev_priv(netdev);
+        int err = -ENOMEM;
+        char hwname[16];
+
+        /* At this point, urbs are NULL, and skb is NULL (see ksdazzle_probe) */
+        kingsun->receiving = 0;
+
+        /* Initialize for SIR to copy data directly into skb.  */
+        kingsun->rx_unwrap_buff.in_frame = FALSE;
+        kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME;
+        kingsun->rx_unwrap_buff.truesize = IRDA_SKB_MAX_MTU;
+        kingsun->rx_unwrap_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
+        if (!kingsun->rx_unwrap_buff.skb)
+                goto free_mem;
+
+        skb_reserve(kingsun->rx_unwrap_buff.skb, 1);
+        kingsun->rx_unwrap_buff.head = kingsun->rx_unwrap_buff.skb->data;
+
+        kingsun->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+        if (!kingsun->rx_urb)
+                goto free_mem;
+
+        kingsun->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+        if (!kingsun->tx_urb)
+                goto free_mem;
+
+        kingsun->speed_urb = usb_alloc_urb(0, GFP_KERNEL);
+        if (!kingsun->speed_urb)
+                goto free_mem;
+
+        /* Initialize speed for dongle */
+        kingsun->new_speed = 9600;
+        err = ksdazzle_change_speed(kingsun, 9600);
+        if (err < 0)
+                goto free_mem;
+
+        /*
+         * Now that everything should be initialized properly,
+         * Open new IrLAP layer instance to take care of us...
+         */
+        sprintf(hwname, "usb#%d", kingsun->usbdev->devnum);
+        kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname);
+        if (!kingsun->irlap) {
+                err("ksdazzle-sir: irlap_open failed");
+                goto free_mem;
+        }
+
+        /* Start reception. */
+        usb_fill_int_urb(kingsun->rx_urb, kingsun->usbdev,
+                         usb_rcvintpipe(kingsun->usbdev, kingsun->ep_in),
+                         kingsun->rx_payload, 8, ksdazzle_rcv_irq, kingsun, 1);
+        kingsun->rx_urb->status = 0;
+        err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL);
+        if (err) {
+                err("ksdazzle-sir: first urb-submit failed: %d", err);
+                goto close_irlap;
+        }
+
+        netif_start_queue(netdev);
+
+        /* Situation at this point:
+           - all work buffers allocated
+           - urbs allocated and ready to fill
+           - max rx packet known (in max_rx)
+           - unwrap state machine initialized, in state outside of any frame
+           - receive request in progress
+           - IrLAP layer started, about to hand over packets to send
+         */
+
+        return 0;
+
+      close_irlap:
+        irlap_close(kingsun->irlap);
+      free_mem:
+        usb_free_urb(kingsun->speed_urb);
+        kingsun->speed_urb = NULL;
+        usb_free_urb(kingsun->tx_urb);
+        kingsun->tx_urb = NULL;
+        usb_free_urb(kingsun->rx_urb);
+        kingsun->rx_urb = NULL;
+        if (kingsun->rx_unwrap_buff.skb) {
+                kfree_skb(kingsun->rx_unwrap_buff.skb);
+                kingsun->rx_unwrap_buff.skb = NULL;
+                kingsun->rx_unwrap_buff.head = NULL;
+        }
+        return err;
+}
+
+/*
+ * Function ksdazzle_net_close (dev)
+ *
+ *    Network device is taken down. Usually this is done by
+ *    "ifconfig irda0 down"
+ */
+static int ksdazzle_net_close(struct net_device *netdev)
+{
+        struct ksdazzle_cb *kingsun = netdev_priv(netdev);
+
+        /* Stop transmit processing */
+        netif_stop_queue(netdev);
+
+        /* Mop up receive && transmit urb's */
+        usb_kill_urb(kingsun->tx_urb);
+        usb_free_urb(kingsun->tx_urb);
+        kingsun->tx_urb = NULL;
+
+        usb_kill_urb(kingsun->speed_urb);
+        usb_free_urb(kingsun->speed_urb);
+        kingsun->speed_urb = NULL;
+
+        usb_kill_urb(kingsun->rx_urb);
+        usb_free_urb(kingsun->rx_urb);
+        kingsun->rx_urb = NULL;
+
+        kfree_skb(kingsun->rx_unwrap_buff.skb);
+        kingsun->rx_unwrap_buff.skb = NULL;
+        kingsun->rx_unwrap_buff.head = NULL;
+        kingsun->rx_unwrap_buff.in_frame = FALSE;
+        kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME;
+        kingsun->receiving = 0;
+
+        /* Stop and remove instance of IrLAP */
+        irlap_close(kingsun->irlap);
+
+        kingsun->irlap = NULL;
+
+        return 0;
+}
+
+/*
+ * IOCTLs : Extra out-of-band network commands...
+ */
+static int ksdazzle_net_ioctl(struct net_device *netdev, struct ifreq *rq,
+                              int cmd)
+{
+        struct if_irda_req *irq = (struct if_irda_req *)rq;
+        struct ksdazzle_cb *kingsun = netdev_priv(netdev);
+        int ret = 0;
+
+        switch (cmd) {
+        case SIOCSBANDWIDTH:    /* Set bandwidth */
+                if (!capable(CAP_NET_ADMIN))
+                        return -EPERM;
+
+                /* Check if the device is still there */
+                if (netif_device_present(kingsun->netdev))
+                        return ksdazzle_change_speed(kingsun,
+                                                     irq->ifr_baudrate);
+                break;
+
+        case SIOCSMEDIABUSY:    /* Set media busy */
+                if (!capable(CAP_NET_ADMIN))
+                        return -EPERM;
+
+                /* Check if the IrDA stack is still there */
+                if (netif_running(kingsun->netdev))
+                        irda_device_set_media_busy(kingsun->netdev, TRUE);
+                break;
+
+        case SIOCGRECEIVING:
+                /* Only approximately true */
+                irq->ifr_receiving = kingsun->receiving;
+                break;
+
+        default:
+                ret = -EOPNOTSUPP;
+        }
+
+        return ret;
+}
+
+/*
+ * Get device stats (for /proc/net/dev and ifconfig)
+ */
+static struct net_device_stats *ksdazzle_net_get_stats(struct net_device
+                                                       *netdev)
+{
+        struct ksdazzle_cb *kingsun = netdev_priv(netdev);
+        return &kingsun->stats;
+}
+
+/*
+ * This routine is called by the USB subsystem for each new device
+ * in the system. We need to check if the device is ours, and in
+ * this case start handling it.
+ */
+static int ksdazzle_probe(struct usb_interface *intf,
+                          const struct usb_device_id *id)
+{
+        struct usb_host_interface *interface;
+        struct usb_endpoint_descriptor *endpoint;
+
+        struct usb_device *dev = interface_to_usbdev(intf);
+        struct ksdazzle_cb *kingsun = NULL;
+        struct net_device *net = NULL;
+        int ret = -ENOMEM;
+        int pipe, maxp_in, maxp_out;
+        __u8 ep_in;
+        __u8 ep_out;
+
+        /* Check that there really are two interrupt endpoints. Check based on the
+           one in drivers/usb/input/usbmouse.c
+         */
+        interface = intf->cur_altsetting;
+        if (interface->desc.bNumEndpoints != 2) {
+                err("ksdazzle: expected 2 endpoints, found %d",
+                    interface->desc.bNumEndpoints);
+                return -ENODEV;
+        }
+        endpoint = &interface->endpoint[KINGSUN_EP_IN].desc;
+        if (!usb_endpoint_is_int_in(endpoint)) {
+                err("ksdazzle: endpoint 0 is not interrupt IN");
+                return -ENODEV;
+        }
+
+        ep_in = endpoint->bEndpointAddress;
+        pipe = usb_rcvintpipe(dev, ep_in);
+        maxp_in = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+        if (maxp_in > 255 || maxp_in <= 1) {
+                err("ksdazzle: endpoint 0 has max packet size %d not in range [2..255]", maxp_in);
+                return -ENODEV;
+        }
+
+        endpoint = &interface->endpoint[KINGSUN_EP_OUT].desc;
+        if (!usb_endpoint_is_int_out(endpoint)) {
+                err("ksdazzle: endpoint 1 is not interrupt OUT");
+                return -ENODEV;
+        }
+
+        ep_out = endpoint->bEndpointAddress;
+        pipe = usb_sndintpipe(dev, ep_out);
+        maxp_out = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+        /* Allocate network device container. */
+        net = alloc_irdadev(sizeof(*kingsun));
+        if (!net)
+                goto err_out1;
+
+        SET_MODULE_OWNER(net);
+        SET_NETDEV_DEV(net, &intf->dev);
+        kingsun = netdev_priv(net);
+        kingsun->netdev = net;
+        kingsun->usbdev = dev;
+        kingsun->ep_in = ep_in;
+        kingsun->ep_out = ep_out;
+        kingsun->irlap = NULL;
+        kingsun->tx_urb = NULL;
+        kingsun->tx_buf_clear = NULL;
+        kingsun->tx_buf_clear_used = 0;
+        kingsun->tx_buf_clear_sent = 0;
+
+        kingsun->rx_urb = NULL;
+        kingsun->rx_unwrap_buff.in_frame = FALSE;
+        kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME;
+        kingsun->rx_unwrap_buff.skb = NULL;
+        kingsun->receiving = 0;
+        spin_lock_init(&kingsun->lock);
+
+        kingsun->speed_setuprequest = NULL;
+        kingsun->speed_urb = NULL;
+        kingsun->speedparams.baudrate = 0;
+
+        /* Allocate output buffer */
+        kingsun->tx_buf_clear = kmalloc(KINGSUN_SND_FIFO_SIZE, GFP_KERNEL);
+        if (!kingsun->tx_buf_clear)
+                goto free_mem;
+
+        /* Allocate and initialize speed setup packet */
+        kingsun->speed_setuprequest =
+            kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+        if (!kingsun->speed_setuprequest)
+                goto free_mem;
+        kingsun->speed_setuprequest->bRequestType =
+            USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+        kingsun->speed_setuprequest->bRequest = KINGSUN_REQ_SEND;
+        kingsun->speed_setuprequest->wValue = cpu_to_le16(0x0200);
+        kingsun->speed_setuprequest->wIndex = cpu_to_le16(0x0001);
+        kingsun->speed_setuprequest->wLength =
+            cpu_to_le16(sizeof(struct ksdazzle_speedparams));
+
+        printk(KERN_INFO "KingSun/Dazzle IRDA/USB found at address %d, "
+               "Vendor: %x, Product: %x\n",
+               dev->devnum, le16_to_cpu(dev->descriptor.idVendor),
+               le16_to_cpu(dev->descriptor.idProduct));
+
+        /* Initialize QoS for this device */
+        irda_init_max_qos_capabilies(&kingsun->qos);
+
+        /* Baud rates known to be supported. Please uncomment if devices (other
+           than a SonyEriccson K300 phone) can be shown to support higher speeds
+           with this dongle.
+         */
+        kingsun->qos.baud_rate.bits =
+            IR_2400 | IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200;
+        kingsun->qos.min_turn_time.bits &= KINGSUN_MTT;
+        irda_qos_bits_to_value(&kingsun->qos);
+
+        /* Override the network functions we need to use */
+        net->hard_start_xmit = ksdazzle_hard_xmit;
+        net->open = ksdazzle_net_open;
+        net->stop = ksdazzle_net_close;
+        net->get_stats = ksdazzle_net_get_stats;
+        net->do_ioctl = ksdazzle_net_ioctl;
+
+        ret = register_netdev(net);
+        if (ret != 0)
+                goto free_mem;
+
+        info("IrDA: Registered KingSun/Dazzle device %s", net->name);
+
+        usb_set_intfdata(intf, kingsun);
+
+        /* Situation at this point:
+           - all work buffers allocated
+           - setup requests pre-filled
+           - urbs not allocated, set to NULL
+           - max rx packet known (is KINGSUN_FIFO_SIZE)
+           - unwrap state machine (partially) initialized, but skb == NULL
+         */
+
+        return 0;
+
+      free_mem:
+        kfree(kingsun->speed_setuprequest);
+        kfree(kingsun->tx_buf_clear);
+        free_netdev(net);
+      err_out1:
+        return ret;
+}
+
+/*
+ * The current device is removed, the USB layer tell us to shut it down...
+ */
+static void ksdazzle_disconnect(struct usb_interface *intf)
+{
+        struct ksdazzle_cb *kingsun = usb_get_intfdata(intf);
+
+        if (!kingsun)
+                return;
+
+        unregister_netdev(kingsun->netdev);
+
+        /* Mop up receive && transmit urb's */
+        usb_kill_urb(kingsun->speed_urb);
+        usb_free_urb(kingsun->speed_urb);
+        kingsun->speed_urb = NULL;
+
+        usb_kill_urb(kingsun->tx_urb);
+        usb_free_urb(kingsun->tx_urb);
+        kingsun->tx_urb = NULL;
+
+        usb_kill_urb(kingsun->rx_urb);
+        usb_free_urb(kingsun->rx_urb);
+        kingsun->rx_urb = NULL;
+
+        kfree(kingsun->speed_setuprequest);
+        kfree(kingsun->tx_buf_clear);
+        free_netdev(kingsun->netdev);
+
+        usb_set_intfdata(intf, NULL);
+}
+
+#ifdef CONFIG_PM
+/* USB suspend, so power off the transmitter/receiver */
+static int ksdazzle_suspend(struct usb_interface *intf, pm_message_t message)
+{
+        struct ksdazzle_cb *kingsun = usb_get_intfdata(intf);
+
+        netif_device_detach(kingsun->netdev);
+        if (kingsun->speed_urb != NULL)
+                usb_kill_urb(kingsun->speed_urb);
+        if (kingsun->tx_urb != NULL)
+                usb_kill_urb(kingsun->tx_urb);
+        if (kingsun->rx_urb != NULL)
+                usb_kill_urb(kingsun->rx_urb);
+        return 0;
+}
+
+/* Coming out of suspend, so reset hardware */
+static int ksdazzle_resume(struct usb_interface *intf)
+{
+        struct ksdazzle_cb *kingsun = usb_get_intfdata(intf);
+
+        if (kingsun->rx_urb != NULL) {
+                /* Setup request already filled in ksdazzle_probe */
+                usb_submit_urb(kingsun->rx_urb, GFP_KERNEL);
+        }
+        netif_device_attach(kingsun->netdev);
+
+        return 0;
+}
+#endif
+
+/*
+ * USB device callbacks
+ */
+static struct usb_driver irda_driver = {
+        .name = "ksdazzle-sir",
+        .probe = ksdazzle_probe,
+        .disconnect = ksdazzle_disconnect,
+        .id_table = dongles,
+#ifdef CONFIG_PM
+        .suspend = ksdazzle_suspend,
+        .resume = ksdazzle_resume,
+#endif
+};
+
+/*
+ * Module insertion
+ */
+static int __init ksdazzle_init(void)
+{
+        return usb_register(&irda_driver);
+}
+
+module_init(ksdazzle_init);
+
+/*
+ * Module removal
+ */
+static void __exit ksdazzle_cleanup(void)
+{
+        /* Deregister the driver and remove all pending instances */
+        usb_deregister(&irda_driver);
+}
+
+module_exit(ksdazzle_cleanup);
+
+MODULE_AUTHOR("Alex Villacís Lasso <a_villacis@palosanto.com>");
+MODULE_DESCRIPTION("IrDA-USB Dongle Driver for KingSun Dazzle");
+MODULE_LICENSE("GPL");