1 files changed, 404 insertions, 0 deletions

diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
new file mode 100644
index 000000000000..a464841da49f
--- /dev/null
+++ b/drivers/net/irda/Kconfig
@@ -0,0 +1,404 @@
+
+menu "Infrared-port device drivers"
+        depends on IRDA!=n
+
+comment "SIR device drivers"
+
+config IRTTY_SIR
+        tristate "IrTTY (uses Linux serial driver)"
+        depends on IRDA
+        help
+          Say Y here if you want to build support for the IrTTY line
+          discipline.  To compile it as a module, choose M here: the module
+          will be called irtty-sir. IrTTY makes it possible to use Linux's
+          own serial driver for all IrDA ports that are 16550 compatible.
+          Most IrDA chips are 16550 compatible so you should probably say Y
+          to this option.  Using IrTTY will however limit the speed of the
+          connection to 115200 bps (IrDA SIR mode).
+
+          If unsure, say Y.
+
+comment "Dongle support"
+
+config DONGLE
+        bool "Serial dongle support"
+        depends on IRTTY_SIR
+        help
+          Say Y here if you have an infrared device that connects to your
+          computer's serial port. These devices are called dongles. Then say Y
+          or M to the driver for your particular dongle below.
+
+          Note that the answer to this question won't directly affect the
+          kernel: saying N will just cause the configurator to skip all
+          the questions about serial dongles.
+
+config ESI_DONGLE
+        tristate "ESI JetEye PC dongle"
+        depends on DONGLE && IRDA
+        help
+          Say Y here if you want to build support for the Extended Systems
+          JetEye PC dongle.  To compile it as a module, choose M here. The ESI
+          dongle attaches to the normal 9-pin serial port connector, and can
+          currently only be used by IrTTY.  To activate support for ESI
+          dongles you will have to start irattach like this:
+          "irattach -d esi".
+
+config ACTISYS_DONGLE
+        tristate "ACTiSYS IR-220L and IR220L+ dongle"
+        depends on DONGLE && IRDA
+        help
+          Say Y here if you want to build support for the ACTiSYS IR-220L and
+          IR220L+ dongles.  To compile it as a module, choose M here. The
+          ACTiSYS dongles attaches to the normal 9-pin serial port connector,
+          and can currently only be used by IrTTY.  To activate support for
+          ACTiSYS dongles you will have to start irattach like this:
+          "irattach -d actisys" or "irattach -d actisys+".
+
+config TEKRAM_DONGLE
+        tristate "Tekram IrMate 210B dongle"
+        depends on DONGLE && IRDA
+        help
+          Say Y here if you want to build support for the Tekram IrMate 210B
+          dongle.  To compile it as a module, choose M here. The Tekram dongle
+          attaches to the normal 9-pin serial port connector, and can
+          currently only be used by IrTTY.  To activate support for Tekram
+          dongles you will have to start irattach like this:
+          "irattach -d tekram".
+
+config LITELINK_DONGLE
+        tristate "Parallax LiteLink dongle"
+        depends on DONGLE && IRDA
+        help
+          Say Y here if you want to build support for the Parallax Litelink
+          dongle.  To compile it as a module, choose M here.  The Parallax
+          dongle attaches to the normal 9-pin serial port connector, and can
+          currently only be used by IrTTY.  To activate support for Parallax
+          dongles you will have to start irattach like this:
+          "irattach -d litelink".
+
+config MA600_DONGLE
+        tristate "Mobile Action MA600 dongle"
+        depends on DONGLE && IRDA && EXPERIMENTAL
+        help
+          Say Y here if you want to build support for the Mobile Action MA600
+          dongle.  To compile it as a module, choose M here. The MA600 dongle
+          attaches to the normal 9-pin serial port connector, and can
+          currently only be used by IrTTY.  The driver should also support
+          the MA620 USB version of the dongle, if the integrated USB-to-RS232
+          converter is supported by usbserial. To activate support for
+          MA600 dongle you will have to start irattach like this:
+          "irattach -d ma600".
+
+config GIRBIL_DONGLE
+        tristate "Greenwich GIrBIL dongle"
+        depends on DONGLE && IRDA && EXPERIMENTAL
+        help
+          Say Y here if you want to build support for the Greenwich GIrBIL
+          dongle.  If you want to compile it as a module, choose M here.
+          The Greenwich dongle attaches to the normal 9-pin serial port
+          connector, and can currently only be used by IrTTY.  To activate
+          support for Greenwich dongles you will have to start irattach
+          like this: "irattach -d girbil".
+
+config MCP2120_DONGLE
+        tristate "Microchip MCP2120"
+        depends on DONGLE && IRDA && EXPERIMENTAL
+        help
+          Say Y here if you want to build support for the Microchip MCP2120
+          dongle.  If you want to compile it as a module, choose M here.
+          The MCP2120 dongle attaches to the normal 9-pin serial port
+          connector, and can currently only be used by IrTTY.  To activate
+          support for MCP2120 dongles you will have to start irattach
+          like this: "irattach -d mcp2120".
+
+          You must build this dongle yourself.  For more information see:
+          <http://www.eyetap.org/~tangf/irda_sir_linux.html>
+
+config OLD_BELKIN_DONGLE
+        tristate "Old Belkin dongle"
+        depends on DONGLE && IRDA && EXPERIMENTAL
+        help
+          Say Y here if you want to build support for the Adaptec Airport 1000
+          and 2000 dongles.  If you want to compile it as a module, choose
+          M here. Some information is contained in the comments
+          at the top of <file:drivers/net/irda/old_belkin.c>.
+
+config ACT200L_DONGLE
+        tristate "ACTiSYS IR-200L dongle"
+        depends on DONGLE && IRDA && EXPERIMENTAL
+        help
+          Say Y here if you want to build support for the ACTiSYS IR-200L
+          dongle. If you want to compile it as a module, choose M here.
+          The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
+          port connector, and can currently only be used by IrTTY.
+          To activate support for ACTiSYS IR-200L dongle you will have to
+          start irattach like this: "irattach -d act200l".
+
+comment "Old SIR device drivers"
+
+config IRPORT_SIR
+        tristate "IrPORT (IrDA serial driver)"
+        depends on IRDA && BROKEN_ON_SMP
+        ---help---
+          Say Y here if you want to build support for the IrPORT IrDA device
+          driver.  To compile it as a module, choose M here: the module will be
+          called irport. IrPORT can be used instead of IrTTY and sometimes
+          this can be better.  One example is if your IrDA port does not
+          have echo-canceling, which will work OK with IrPORT since this
+          driver is working in half-duplex mode only.  You don't need to use
+          irattach with IrPORT, but you just insert it the same way as FIR
+          drivers (insmod irport io=0x3e8 irq=11).  Notice that IrPORT is a
+          SIR device driver which means that speed is limited to 115200 bps.
+
+          If unsure, say Y.
+
+comment "Old Serial dongle support"
+
+config DONGLE_OLD
+        bool "Old Serial dongle support"
+        depends on (IRTTY_OLD || IRPORT_SIR) && BROKEN_ON_SMP
+        help
+          Say Y here if you have an infrared device that connects to your
+          computer's serial port. These devices are called dongles. Then say Y
+          or M to the driver for your particular dongle below.
+
+          Note that the answer to this question won't directly affect the
+          kernel: saying N will just cause the configurator to skip all
+          the questions about serial dongles.
+
+config ESI_DONGLE_OLD
+        tristate "ESI JetEye PC dongle"
+        depends on DONGLE_OLD && IRDA
+        help
+          Say Y here if you want to build support for the Extended Systems
+          JetEye PC dongle.  To compile it as a module, choose M here.  The ESI
+          dongle attaches to the normal 9-pin serial port connector, and can
+          currently only be used by IrTTY.  To activate support for ESI
+          dongles you will have to start irattach like this:
+          "irattach -d esi".
+
+config ACTISYS_DONGLE_OLD
+        tristate "ACTiSYS IR-220L and IR220L+ dongle"
+        depends on DONGLE_OLD && IRDA
+        help
+          Say Y here if you want to build support for the ACTiSYS IR-220L and
+          IR220L+ dongles.  To compile it as a module, choose M here.  The
+          ACTiSYS dongles attaches to the normal 9-pin serial port connector,
+          and can currently only be used by IrTTY.  To activate support for
+          ACTiSYS dongles you will have to start irattach like this:
+          "irattach -d actisys" or "irattach -d actisys+".
+
+config TEKRAM_DONGLE_OLD
+        tristate "Tekram IrMate 210B dongle"
+        depends on DONGLE_OLD && IRDA
+        help
+          Say Y here if you want to build support for the Tekram IrMate 210B
+          dongle.  To compile it as a module, choose M here.  The Tekram dongle
+          attaches to the normal 9-pin serial port connector, and can
+          currently only be used by IrTTY.  To activate support for Tekram
+          dongles you will have to start irattach like this:
+          "irattach -d tekram".
+
+config GIRBIL_DONGLE_OLD
+        tristate "Greenwich GIrBIL dongle"
+        depends on DONGLE_OLD && IRDA
+        help
+          Say Y here if you want to build support for the Greenwich GIrBIL
+          dongle.  To compile it as a module, choose M here.  The Greenwich
+          dongle attaches to the normal 9-pin serial port connector, and can
+          currently only be used by IrTTY.  To activate support for Greenwich
+          dongles you will have to insert "irattach -d girbil" in the
+          /etc/irda/drivers script.
+
+config LITELINK_DONGLE_OLD
+        tristate "Parallax LiteLink dongle"
+        depends on DONGLE_OLD && IRDA
+        help
+          Say Y here if you want to build support for the Parallax Litelink
+          dongle.  To compile it as a module, choose M here.  The Parallax
+          dongle attaches to the normal 9-pin serial port connector, and can
+          currently only be used by IrTTY.  To activate support for Parallax
+          dongles you will have to start irattach like this:
+          "irattach -d litelink".
+
+config MCP2120_DONGLE_OLD
+        tristate "Microchip MCP2120"
+        depends on DONGLE_OLD && IRDA
+        help
+          Say Y here if you want to build support for the Microchip MCP2120
+          dongle.  To compile it as a module, choose M here.  The MCP2120 dongle
+          attaches to the normal 9-pin serial port connector, and can
+          currently only be used by IrTTY.  To activate support for MCP2120
+          dongles you will have to insert "irattach -d mcp2120" in the
+          /etc/irda/drivers script.
+
+          You must build this dongle yourself.  For more information see:
+          <http://www.eyetap.org/~tangf/irda_sir_linux.html>
+
+config OLD_BELKIN_DONGLE_OLD
+        tristate "Old Belkin dongle"
+        depends on DONGLE_OLD && IRDA
+        help
+          Say Y here if you want to build support for the Adaptec Airport 1000
+          and 2000 dongles.  To compile it as a module, choose M here: the module
+          will be called old_belkin.  Some information is contained in the
+          comments at the top of <file:drivers/net/irda/old_belkin.c>.
+
+config ACT200L_DONGLE_OLD
+        tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)"
+        depends on DONGLE_OLD && EXPERIMENTAL && IRDA
+        help
+          Say Y here if you want to build support for the ACTiSYS IR-200L
+          dongle.  To compile it as a module, choose M here.  The ACTiSYS
+          IR-200L dongle attaches to the normal 9-pin serial port connector,
+          and can currently only be used by IrTTY. To activate support for
+          ACTiSYS IR-200L dongles you will have to start irattach like this:
+          "irattach -d act200l".
+
+config MA600_DONGLE_OLD
+        tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
+        depends on DONGLE_OLD && EXPERIMENTAL && IRDA
+        ---help---
+          Say Y here if you want to build support for the Mobile Action MA600
+          dongle.  To compile it as a module, choose M here. The MA600 dongle
+          attaches to the normal 9-pin serial port connector, and can
+          currently only be tested on IrCOMM.  To activate support for MA600
+          dongles you will have to insert "irattach -d ma600" in the
+          /etc/irda/drivers script.  Note: irutils 0.9.15 requires no
+          modification. irutils 0.9.9 needs modification. For more
+          information, download the following tar gzip file.
+
+          There is a pre-compiled module on
+          <http://engsvr.ust.hk/~eetwl95/ma600.html>
+
+config EP7211_IR
+        tristate "EP7211 I/R support"
+        depends on DONGLE_OLD && ARCH_EP7211 && IRDA
+
+comment "FIR device drivers"
+
+config USB_IRDA
+        tristate "IrDA USB dongles"
+        depends on IRDA && USB
+        ---help---
+          Say Y here if you want to build support for the USB IrDA FIR Dongle
+          device driver.  To compile it as a module, choose M here: the module
+          will be called irda-usb.  IrDA-USB support the various IrDA USB
+          dongles available and most of their pecularities.  Those dongles
+          plug in the USB port of your computer, are plug and play, and
+          support SIR and FIR (4Mbps) speeds.  On the other hand, those
+          dongles tend to be less efficient than a FIR chipset.
+
+          Please note that the driver is still experimental.  And of course,
+          you will need both USB and IrDA support in your kernel...
+
+config SIGMATEL_FIR
+        tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)"
+        depends on IRDA && USB && EXPERIMENTAL
+        select CRC32
+        ---help---
+          Say Y here if you want to build support for the SigmaTel STIr4200
+          USB IrDA FIR bridge device driver.  
+
+          USB bridge based on the SigmaTel STIr4200 don't conform to the
+          IrDA-USB device class specification, and therefore need their
+          own specific driver. Those dongles support SIR and FIR (4Mbps)
+          speeds. 
+
+          To compile it as a module, choose M here: the module will be called
+          stir4200.
+
+config NSC_FIR
+        tristate "NSC PC87108/PC87338"
+        depends on IRDA && ISA
+        help
+          Say Y here if you want to build support for the NSC PC87108 and
+          PC87338 IrDA chipsets.  This driver supports SIR,
+          MIR and FIR (4Mbps) speeds.
+
+          To compile it as a module, choose M here: the module will be called
+          nsc-ircc.
+
+config WINBOND_FIR
+        tristate "Winbond W83977AF (IR)"
+        depends on IRDA && ISA
+        help
+          Say Y here if you want to build IrDA support for the Winbond
+          W83977AF super-io chipset.  This driver should be used for the IrDA
+          chipset in the Corel NetWinder.  The driver supports SIR, MIR and
+          FIR (4Mbps) speeds.
+
+          To compile it as a module, choose M here: the module will be called
+          w83977af_ir.
+
+config TOSHIBA_FIR
+        tristate "Toshiba Type-O IR Port"
+        depends on IRDA && PCI && !64BIT
+        help
+          Say Y here if you want to build support for the Toshiba Type-O IR
+          and Donau oboe chipsets. These chipsets are used by the Toshiba
+          Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
+          To compile it as a module, choose M here: the module will be called
+          donauboe.
+
+config AU1000_FIR
+        tristate "Alchemy Au1000 SIR/FIR"
+        depends on MIPS_AU1000 && IRDA
+
+config SMC_IRCC_FIR
+        tristate "SMSC IrCC (EXPERIMENTAL)"
+        depends on EXPERIMENTAL && IRDA && ISA
+        help
+          Say Y here if you want to build support for the SMC Infrared
+          Communications Controller.  It is used in a wide variety of
+          laptops (Fujitsu, Sony, Compaq and some Toshiba).
+          To compile it as a module, choose M here: the module will be called
+          smsc-ircc2.o.
+
+config ALI_FIR
+        tristate "ALi M5123 FIR (EXPERIMENTAL)"
+        depends on EXPERIMENTAL && IRDA && ISA
+        help
+          Say Y here if you want to build support for the ALi M5123 FIR
+          Controller.  The ALi M5123 FIR Controller is embedded in ALi M1543C,
+          M1535, M1535D, M1535+, M1535D Sourth Bridge.  This driver supports
+          SIR, MIR and FIR (4Mbps) speeds.
+
+          To compile it as a module, choose M here: the module will be called
+          ali-ircc.
+
+config VLSI_FIR
+        tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)"
+        depends on EXPERIMENTAL && IRDA && PCI
+        help
+          Say Y here if you want to build support for the VLSI 82C147
+          PCI-IrDA Controller. This controller is used by the HP OmniBook 800
+          and 5500 notebooks. The driver provides support for SIR, MIR and
+          FIR (4Mbps) speeds.
+
+          To compile it as a module, choose M here: the module will be called
+          vlsi_ir.
+
+config SA1100_FIR
+        tristate "SA1100 Internal IR"
+        depends on ARCH_SA1100 && IRDA
+
+config VIA_FIR
+        tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
+        depends on IRDA && ISA && PCI
+        help
+          Say Y here if you want to build support for the VIA VT8231
+          and VIA VT1211 IrDA controllers, found on the motherboards using
+          those those VIA chipsets. To use this controller, you will need
+          to plug a specific 5 pins FIR IrDA dongle in the specific
+          motherboard connector. The driver provides support for SIR, MIR
+          and FIR (4Mbps) speeds.
+
+          You will need to specify the 'dongle_id' module parameter to
+          indicate the FIR dongle attached to the controller.
+
+          To compile it as a module, choose M here: the module will be called
+          via-ircc.
+
+endmenu
+