1 files changed, 44 insertions, 0 deletions

diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index 59817bcc7169..9d7fa2fb85ea 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -727,6 +727,34 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw)
 }
 
 /**
+ *  igb_power_up_serdes_link_82575 - Power up the serdes link after shutdown
+ *  @hw: pointer to the HW structure
+ **/
+void igb_power_up_serdes_link_82575(struct e1000_hw *hw)
+{
+        u32 reg;
+
+
+        if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+            !igb_sgmii_active_82575(hw))
+                return;
+
+        /* Enable PCS to turn on link */
+        reg = rd32(E1000_PCS_CFG0);
+        reg |= E1000_PCS_CFG_PCS_EN;
+        wr32(E1000_PCS_CFG0, reg);
+
+        /* Power up the laser */
+        reg = rd32(E1000_CTRL_EXT);
+        reg &= ~E1000_CTRL_EXT_SDP3_DATA;
+        wr32(E1000_CTRL_EXT, reg);
+
+        /* flush the write to verify completion */
+        wrfl();
+        msleep(1);
+}
+
+/**
  *  igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
  *  @hw: pointer to the HW structure
  *  @speed: stores the current speed
@@ -1166,6 +1194,22 @@ out:
 }
 
 /**
+ * igb_power_down_phy_copper_82575 - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+void igb_power_down_phy_copper_82575(struct e1000_hw *hw)
+{
+        /* If the management interface is not enabled, then power down */
+        if (!(igb_enable_mng_pass_thru(hw) || igb_check_reset_block(hw)))
+                igb_power_down_phy_copper(hw);
+
+        return;
+}
+
+/**
  *  igb_clear_hw_cntrs_82575 - Clear device specific hardware counters
  *  @hw: pointer to the HW structure
  *