aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/gianfar_phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/gianfar_phy.c')
-rw-r--r--drivers/net/gianfar_phy.c661
1 files changed, 0 insertions, 661 deletions
diff --git a/drivers/net/gianfar_phy.c b/drivers/net/gianfar_phy.c
deleted file mode 100644
index 7c965f268a82..000000000000
--- a/drivers/net/gianfar_phy.c
+++ /dev/null
@@ -1,661 +0,0 @@
1/*
2 * drivers/net/gianfar_phy.c
3 *
4 * Gianfar Ethernet Driver -- PHY handling
5 * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
6 * Based on 8260_io/fcc_enet.c
7 *
8 * Author: Andy Fleming
9 * Maintainer: Kumar Gala (kumar.gala@freescale.com)
10 *
11 * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
12 *
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms of the GNU General Public License as published by the
15 * Free Software Foundation; either version 2 of the License, or (at your
16 * option) any later version.
17 *
18 */
19
20#include <linux/config.h>
21#include <linux/kernel.h>
22#include <linux/sched.h>
23#include <linux/string.h>
24#include <linux/errno.h>
25#include <linux/slab.h>
26#include <linux/interrupt.h>
27#include <linux/init.h>
28#include <linux/delay.h>
29#include <linux/netdevice.h>
30#include <linux/etherdevice.h>
31#include <linux/skbuff.h>
32#include <linux/spinlock.h>
33#include <linux/mm.h>
34
35#include <asm/io.h>
36#include <asm/irq.h>
37#include <asm/uaccess.h>
38#include <linux/module.h>
39#include <linux/version.h>
40#include <linux/crc32.h>
41#include <linux/mii.h>
42
43#include "gianfar.h"
44#include "gianfar_phy.h"
45
46static void config_genmii_advert(struct gfar_mii_info *mii_info);
47static void genmii_setup_forced(struct gfar_mii_info *mii_info);
48static void genmii_restart_aneg(struct gfar_mii_info *mii_info);
49static int gbit_config_aneg(struct gfar_mii_info *mii_info);
50static int genmii_config_aneg(struct gfar_mii_info *mii_info);
51static int genmii_update_link(struct gfar_mii_info *mii_info);
52static int genmii_read_status(struct gfar_mii_info *mii_info);
53u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum);
54void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val);
55
56/* Write value to the PHY for this device to the register at regnum, */
57/* waiting until the write is done before it returns. All PHY */
58/* configuration has to be done through the TSEC1 MIIM regs */
59void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value)
60{
61 struct gfar_private *priv = netdev_priv(dev);
62 struct gfar *regbase = priv->phyregs;
63
64 /* Set the PHY address and the register address we want to write */
65 gfar_write(&regbase->miimadd, (mii_id << 8) | regnum);
66
67 /* Write out the value we want */
68 gfar_write(&regbase->miimcon, value);
69
70 /* Wait for the transaction to finish */
71 while (gfar_read(&regbase->miimind) & MIIMIND_BUSY)
72 cpu_relax();
73}
74
75/* Reads from register regnum in the PHY for device dev, */
76/* returning the value. Clears miimcom first. All PHY */
77/* configuration has to be done through the TSEC1 MIIM regs */
78int read_phy_reg(struct net_device *dev, int mii_id, int regnum)
79{
80 struct gfar_private *priv = netdev_priv(dev);
81 struct gfar *regbase = priv->phyregs;
82 u16 value;
83
84 /* Set the PHY address and the register address we want to read */
85 gfar_write(&regbase->miimadd, (mii_id << 8) | regnum);
86
87 /* Clear miimcom, and then initiate a read */
88 gfar_write(&regbase->miimcom, 0);
89 gfar_write(&regbase->miimcom, MII_READ_COMMAND);
90
91 /* Wait for the transaction to finish */
92 while (gfar_read(&regbase->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
93 cpu_relax();
94
95 /* Grab the value of the register from miimstat */
96 value = gfar_read(&regbase->miimstat);
97
98 return value;
99}
100
101void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info)
102{
103 if(mii_info->phyinfo->ack_interrupt)
104 mii_info->phyinfo->ack_interrupt(mii_info);
105}
106
107
108void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts)
109{
110 mii_info->interrupts = interrupts;
111 if(mii_info->phyinfo->config_intr)
112 mii_info->phyinfo->config_intr(mii_info);
113}
114
115
116/* Writes MII_ADVERTISE with the appropriate values, after
117 * sanitizing advertise to make sure only supported features
118 * are advertised
119 */
120static void config_genmii_advert(struct gfar_mii_info *mii_info)
121{
122 u32 advertise;
123 u16 adv;
124
125 /* Only allow advertising what this PHY supports */
126 mii_info->advertising &= mii_info->phyinfo->features;
127 advertise = mii_info->advertising;
128
129 /* Setup standard advertisement */
130 adv = phy_read(mii_info, MII_ADVERTISE);
131 adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
132 if (advertise & ADVERTISED_10baseT_Half)
133 adv |= ADVERTISE_10HALF;
134 if (advertise & ADVERTISED_10baseT_Full)
135 adv |= ADVERTISE_10FULL;
136 if (advertise & ADVERTISED_100baseT_Half)
137 adv |= ADVERTISE_100HALF;
138 if (advertise & ADVERTISED_100baseT_Full)
139 adv |= ADVERTISE_100FULL;
140 phy_write(mii_info, MII_ADVERTISE, adv);
141}
142
143static void genmii_setup_forced(struct gfar_mii_info *mii_info)
144{
145 u16 ctrl;
146 u32 features = mii_info->phyinfo->features;
147
148 ctrl = phy_read(mii_info, MII_BMCR);
149
150 ctrl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPEED1000|BMCR_ANENABLE);
151 ctrl |= BMCR_RESET;
152
153 switch(mii_info->speed) {
154 case SPEED_1000:
155 if(features & (SUPPORTED_1000baseT_Half
156 | SUPPORTED_1000baseT_Full)) {
157 ctrl |= BMCR_SPEED1000;
158 break;
159 }
160 mii_info->speed = SPEED_100;
161 case SPEED_100:
162 if (features & (SUPPORTED_100baseT_Half
163 | SUPPORTED_100baseT_Full)) {
164 ctrl |= BMCR_SPEED100;
165 break;
166 }
167 mii_info->speed = SPEED_10;
168 case SPEED_10:
169 if (features & (SUPPORTED_10baseT_Half
170 | SUPPORTED_10baseT_Full))
171 break;
172 default: /* Unsupported speed! */
173 printk(KERN_ERR "%s: Bad speed!\n",
174 mii_info->dev->name);
175 break;
176 }
177
178 phy_write(mii_info, MII_BMCR, ctrl);
179}
180
181
182/* Enable and Restart Autonegotiation */
183static void genmii_restart_aneg(struct gfar_mii_info *mii_info)
184{
185 u16 ctl;
186
187 ctl = phy_read(mii_info, MII_BMCR);
188 ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
189 phy_write(mii_info, MII_BMCR, ctl);
190}
191
192
193static int gbit_config_aneg(struct gfar_mii_info *mii_info)
194{
195 u16 adv;
196 u32 advertise;
197
198 if(mii_info->autoneg) {
199 /* Configure the ADVERTISE register */
200 config_genmii_advert(mii_info);
201 advertise = mii_info->advertising;
202
203 adv = phy_read(mii_info, MII_1000BASETCONTROL);
204 adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
205 MII_1000BASETCONTROL_HALFDUPLEXCAP);
206 if (advertise & SUPPORTED_1000baseT_Half)
207 adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
208 if (advertise & SUPPORTED_1000baseT_Full)
209 adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
210 phy_write(mii_info, MII_1000BASETCONTROL, adv);
211
212 /* Start/Restart aneg */
213 genmii_restart_aneg(mii_info);
214 } else
215 genmii_setup_forced(mii_info);
216
217 return 0;
218}
219
220static int marvell_config_aneg(struct gfar_mii_info *mii_info)
221{
222 /* The Marvell PHY has an errata which requires
223 * that certain registers get written in order
224 * to restart autonegotiation */
225 phy_write(mii_info, MII_BMCR, BMCR_RESET);
226
227 phy_write(mii_info, 0x1d, 0x1f);
228 phy_write(mii_info, 0x1e, 0x200c);
229 phy_write(mii_info, 0x1d, 0x5);
230 phy_write(mii_info, 0x1e, 0);
231 phy_write(mii_info, 0x1e, 0x100);
232
233 gbit_config_aneg(mii_info);
234
235 return 0;
236}
237static int genmii_config_aneg(struct gfar_mii_info *mii_info)
238{
239 if (mii_info->autoneg) {
240 config_genmii_advert(mii_info);
241 genmii_restart_aneg(mii_info);
242 } else
243 genmii_setup_forced(mii_info);
244
245 return 0;
246}
247
248
249static int genmii_update_link(struct gfar_mii_info *mii_info)
250{
251 u16 status;
252
253 /* Do a fake read */
254 phy_read(mii_info, MII_BMSR);
255
256 /* Read link and autonegotiation status */
257 status = phy_read(mii_info, MII_BMSR);
258 if ((status & BMSR_LSTATUS) == 0)
259 mii_info->link = 0;
260 else
261 mii_info->link = 1;
262
263 /* If we are autonegotiating, and not done,
264 * return an error */
265 if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE))
266 return -EAGAIN;
267
268 return 0;
269}
270
271static int genmii_read_status(struct gfar_mii_info *mii_info)
272{
273 u16 status;
274 int err;
275
276 /* Update the link, but return if there
277 * was an error */
278 err = genmii_update_link(mii_info);
279 if (err)
280 return err;
281
282 if (mii_info->autoneg) {
283 status = phy_read(mii_info, MII_LPA);
284
285 if (status & (LPA_10FULL | LPA_100FULL))
286 mii_info->duplex = DUPLEX_FULL;
287 else
288 mii_info->duplex = DUPLEX_HALF;
289 if (status & (LPA_100FULL | LPA_100HALF))
290 mii_info->speed = SPEED_100;
291 else
292 mii_info->speed = SPEED_10;
293 mii_info->pause = 0;
294 }
295 /* On non-aneg, we assume what we put in BMCR is the speed,
296 * though magic-aneg shouldn't prevent this case from occurring
297 */
298
299 return 0;
300}
301static int marvell_read_status(struct gfar_mii_info *mii_info)
302{
303 u16 status;
304 int err;
305
306 /* Update the link, but return if there
307 * was an error */
308 err = genmii_update_link(mii_info);
309 if (err)
310 return err;
311
312 /* If the link is up, read the speed and duplex */
313 /* If we aren't autonegotiating, assume speeds
314 * are as set */
315 if (mii_info->autoneg && mii_info->link) {
316 int speed;
317 status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
318
319#if 0
320 /* If speed and duplex aren't resolved,
321 * return an error. Isn't this handled
322 * by checking aneg?
323 */
324 if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0)
325 return -EAGAIN;
326#endif
327
328 /* Get the duplexity */
329 if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
330 mii_info->duplex = DUPLEX_FULL;
331 else
332 mii_info->duplex = DUPLEX_HALF;
333
334 /* Get the speed */
335 speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK;
336 switch(speed) {
337 case MII_M1011_PHY_SPEC_STATUS_1000:
338 mii_info->speed = SPEED_1000;
339 break;
340 case MII_M1011_PHY_SPEC_STATUS_100:
341 mii_info->speed = SPEED_100;
342 break;
343 default:
344 mii_info->speed = SPEED_10;
345 break;
346 }
347 mii_info->pause = 0;
348 }
349
350 return 0;
351}
352
353
354static int cis820x_read_status(struct gfar_mii_info *mii_info)
355{
356 u16 status;
357 int err;
358
359 /* Update the link, but return if there
360 * was an error */
361 err = genmii_update_link(mii_info);
362 if (err)
363 return err;
364
365 /* If the link is up, read the speed and duplex */
366 /* If we aren't autonegotiating, assume speeds
367 * are as set */
368 if (mii_info->autoneg && mii_info->link) {
369 int speed;
370
371 status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT);
372 if (status & MII_CIS8201_AUXCONSTAT_DUPLEX)
373 mii_info->duplex = DUPLEX_FULL;
374 else
375 mii_info->duplex = DUPLEX_HALF;
376
377 speed = status & MII_CIS8201_AUXCONSTAT_SPEED;
378
379 switch (speed) {
380 case MII_CIS8201_AUXCONSTAT_GBIT:
381 mii_info->speed = SPEED_1000;
382 break;
383 case MII_CIS8201_AUXCONSTAT_100:
384 mii_info->speed = SPEED_100;
385 break;
386 default:
387 mii_info->speed = SPEED_10;
388 break;
389 }
390 }
391
392 return 0;
393}
394
395static int marvell_ack_interrupt(struct gfar_mii_info *mii_info)
396{
397 /* Clear the interrupts by reading the reg */
398 phy_read(mii_info, MII_M1011_IEVENT);
399
400 return 0;
401}
402
403static int marvell_config_intr(struct gfar_mii_info *mii_info)
404{
405 if(mii_info->interrupts == MII_INTERRUPT_ENABLED)
406 phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
407 else
408 phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
409
410 return 0;
411}
412
413static int cis820x_init(struct gfar_mii_info *mii_info)
414{
415 phy_write(mii_info, MII_CIS8201_AUX_CONSTAT,
416 MII_CIS8201_AUXCONSTAT_INIT);
417 phy_write(mii_info, MII_CIS8201_EXT_CON1,
418 MII_CIS8201_EXTCON1_INIT);
419
420 return 0;
421}
422
423static int cis820x_ack_interrupt(struct gfar_mii_info *mii_info)
424{
425 phy_read(mii_info, MII_CIS8201_ISTAT);
426
427 return 0;
428}
429
430static int cis820x_config_intr(struct gfar_mii_info *mii_info)
431{
432 if(mii_info->interrupts == MII_INTERRUPT_ENABLED)
433 phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK);
434 else
435 phy_write(mii_info, MII_CIS8201_IMASK, 0);
436
437 return 0;
438}
439
440#define DM9161_DELAY 10
441
442static int dm9161_read_status(struct gfar_mii_info *mii_info)
443{
444 u16 status;
445 int err;
446
447 /* Update the link, but return if there
448 * was an error */
449 err = genmii_update_link(mii_info);
450 if (err)
451 return err;
452
453 /* If the link is up, read the speed and duplex */
454 /* If we aren't autonegotiating, assume speeds
455 * are as set */
456 if (mii_info->autoneg && mii_info->link) {
457 status = phy_read(mii_info, MII_DM9161_SCSR);
458 if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
459 mii_info->speed = SPEED_100;
460 else
461 mii_info->speed = SPEED_10;
462
463 if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F))
464 mii_info->duplex = DUPLEX_FULL;
465 else
466 mii_info->duplex = DUPLEX_HALF;
467 }
468
469 return 0;
470}
471
472
473static int dm9161_config_aneg(struct gfar_mii_info *mii_info)
474{
475 struct dm9161_private *priv = mii_info->priv;
476
477 if(0 == priv->resetdone)
478 return -EAGAIN;
479
480 return 0;
481}
482
483static void dm9161_timer(unsigned long data)
484{
485 struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data;
486 struct dm9161_private *priv = mii_info->priv;
487 u16 status = phy_read(mii_info, MII_BMSR);
488
489 if (status & BMSR_ANEGCOMPLETE) {
490 priv->resetdone = 1;
491 } else
492 mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
493}
494
495static int dm9161_init(struct gfar_mii_info *mii_info)
496{
497 struct dm9161_private *priv;
498
499 /* Allocate the private data structure */
500 priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL);
501
502 if (NULL == priv)
503 return -ENOMEM;
504
505 mii_info->priv = priv;
506
507 /* Reset is not done yet */
508 priv->resetdone = 0;
509
510 /* Isolate the PHY */
511 phy_write(mii_info, MII_BMCR, BMCR_ISOLATE);
512
513 /* Do not bypass the scrambler/descrambler */
514 phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
515
516 /* Clear 10BTCSR to default */
517 phy_write(mii_info, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT);
518
519 /* Reconnect the PHY, and enable Autonegotiation */
520 phy_write(mii_info, MII_BMCR, BMCR_ANENABLE);
521
522 /* Start a timer for DM9161_DELAY seconds to wait
523 * for the PHY to be ready */
524 init_timer(&priv->timer);
525 priv->timer.function = &dm9161_timer;
526 priv->timer.data = (unsigned long) mii_info;
527 mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
528
529 return 0;
530}
531
532static void dm9161_close(struct gfar_mii_info *mii_info)
533{
534 struct dm9161_private *priv = mii_info->priv;
535
536 del_timer_sync(&priv->timer);
537 kfree(priv);
538}
539
540#if 0
541static int dm9161_ack_interrupt(struct gfar_mii_info *mii_info)
542{
543 phy_read(mii_info, MII_DM9161_INTR);
544
545 return 0;
546}
547#endif
548
549/* Cicada 820x */
550static struct phy_info phy_info_cis820x = {
551 0x000fc440,
552 "Cicada Cis8204",
553 0x000fffc0,
554 .features = MII_GBIT_FEATURES,
555 .init = &cis820x_init,
556 .config_aneg = &gbit_config_aneg,
557 .read_status = &cis820x_read_status,
558 .ack_interrupt = &cis820x_ack_interrupt,
559 .config_intr = &cis820x_config_intr,
560};
561
562static struct phy_info phy_info_dm9161 = {
563 .phy_id = 0x0181b880,
564 .name = "Davicom DM9161E",
565 .phy_id_mask = 0x0ffffff0,
566 .init = dm9161_init,
567 .config_aneg = dm9161_config_aneg,
568 .read_status = dm9161_read_status,
569 .close = dm9161_close,
570};
571
572static struct phy_info phy_info_marvell = {
573 .phy_id = 0x01410c00,
574 .phy_id_mask = 0xffffff00,
575 .name = "Marvell 88E1101/88E1111",
576 .features = MII_GBIT_FEATURES,
577 .config_aneg = &marvell_config_aneg,
578 .read_status = &marvell_read_status,
579 .ack_interrupt = &marvell_ack_interrupt,
580 .config_intr = &marvell_config_intr,
581};
582
583static struct phy_info phy_info_genmii= {
584 .phy_id = 0x00000000,
585 .phy_id_mask = 0x00000000,
586 .name = "Generic MII",
587 .features = MII_BASIC_FEATURES,
588 .config_aneg = genmii_config_aneg,
589 .read_status = genmii_read_status,
590};
591
592static struct phy_info *phy_info[] = {
593 &phy_info_cis820x,
594 &phy_info_marvell,
595 &phy_info_dm9161,
596 &phy_info_genmii,
597 NULL
598};
599
600u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum)
601{
602 u16 retval;
603 unsigned long flags;
604
605 spin_lock_irqsave(&mii_info->mdio_lock, flags);
606 retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
607 spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
608
609 return retval;
610}
611
612void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val)
613{
614 unsigned long flags;
615
616 spin_lock_irqsave(&mii_info->mdio_lock, flags);
617 mii_info->mdio_write(mii_info->dev,
618 mii_info->mii_id,
619 regnum, val);
620 spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
621}
622
623/* Use the PHY ID registers to determine what type of PHY is attached
624 * to device dev. return a struct phy_info structure describing that PHY
625 */
626struct phy_info * get_phy_info(struct gfar_mii_info *mii_info)
627{
628 u16 phy_reg;
629 u32 phy_ID;
630 int i;
631 struct phy_info *theInfo = NULL;
632 struct net_device *dev = mii_info->dev;
633
634 /* Grab the bits from PHYIR1, and put them in the upper half */
635 phy_reg = phy_read(mii_info, MII_PHYSID1);
636 phy_ID = (phy_reg & 0xffff) << 16;
637
638 /* Grab the bits from PHYIR2, and put them in the lower half */
639 phy_reg = phy_read(mii_info, MII_PHYSID2);
640 phy_ID |= (phy_reg & 0xffff);
641
642 /* loop through all the known PHY types, and find one that */
643 /* matches the ID we read from the PHY. */
644 for (i = 0; phy_info[i]; i++)
645 if (phy_info[i]->phy_id ==
646 (phy_ID & phy_info[i]->phy_id_mask)) {
647 theInfo = phy_info[i];
648 break;
649 }
650
651 /* This shouldn't happen, as we have generic PHY support */
652 if (theInfo == NULL) {
653 printk("%s: PHY id %x is not supported!\n", dev->name, phy_ID);
654 return NULL;
655 } else {
656 printk("%s: PHY is %s (%x)\n", dev->name, theInfo->name,
657 phy_ID);
658 }
659
660 return theInfo;
661}