aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/smsc/epic100.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/smsc/epic100.c')
-rw-r--r--drivers/net/ethernet/smsc/epic100.c1609
1 files changed, 1609 insertions, 0 deletions
diff --git a/drivers/net/ethernet/smsc/epic100.c b/drivers/net/ethernet/smsc/epic100.c
new file mode 100644
index 000000000000..814c187d5f95
--- /dev/null
+++ b/drivers/net/ethernet/smsc/epic100.c
@@ -0,0 +1,1609 @@
1/* epic100.c: A SMC 83c170 EPIC/100 Fast Ethernet driver for Linux. */
2/*
3 Written/copyright 1997-2001 by Donald Becker.
4
5 This software may be used and distributed according to the terms of
6 the GNU General Public License (GPL), incorporated herein by reference.
7 Drivers based on or derived from this code fall under the GPL and must
8 retain the authorship, copyright and license notice. This file is not
9 a complete program and may only be used when the entire operating
10 system is licensed under the GPL.
11
12 This driver is for the SMC83c170/175 "EPIC" series, as used on the
13 SMC EtherPower II 9432 PCI adapter, and several CardBus cards.
14
15 The author may be reached as becker@scyld.com, or C/O
16 Scyld Computing Corporation
17 410 Severn Ave., Suite 210
18 Annapolis MD 21403
19
20 Information and updates available at
21 http://www.scyld.com/network/epic100.html
22 [this link no longer provides anything useful -jgarzik]
23
24 ---------------------------------------------------------------------
25
26*/
27
28#define DRV_NAME "epic100"
29#define DRV_VERSION "2.1"
30#define DRV_RELDATE "Sept 11, 2006"
31
32/* The user-configurable values.
33 These may be modified when a driver module is loaded.*/
34
35static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
36
37/* Used to pass the full-duplex flag, etc. */
38#define MAX_UNITS 8 /* More are supported, limit only on options */
39static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
40static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
41
42/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
43 Setting to > 1518 effectively disables this feature. */
44static int rx_copybreak;
45
46/* Operational parameters that are set at compile time. */
47
48/* Keep the ring sizes a power of two for operational efficiency.
49 The compiler will convert <unsigned>'%'<2^N> into a bit mask.
50 Making the Tx ring too large decreases the effectiveness of channel
51 bonding and packet priority.
52 There are no ill effects from too-large receive rings. */
53#define TX_RING_SIZE 256
54#define TX_QUEUE_LEN 240 /* Limit ring entries actually used. */
55#define RX_RING_SIZE 256
56#define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct epic_tx_desc)
57#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct epic_rx_desc)
58
59/* Operational parameters that usually are not changed. */
60/* Time in jiffies before concluding the transmitter is hung. */
61#define TX_TIMEOUT (2*HZ)
62
63#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
64
65/* Bytes transferred to chip before transmission starts. */
66/* Initial threshold, increased on underflow, rounded down to 4 byte units. */
67#define TX_FIFO_THRESH 256
68#define RX_FIFO_THRESH 1 /* 0-3, 0==32, 64,96, or 3==128 bytes */
69
70#include <linux/module.h>
71#include <linux/kernel.h>
72#include <linux/string.h>
73#include <linux/timer.h>
74#include <linux/errno.h>
75#include <linux/ioport.h>
76#include <linux/interrupt.h>
77#include <linux/pci.h>
78#include <linux/delay.h>
79#include <linux/netdevice.h>
80#include <linux/etherdevice.h>
81#include <linux/skbuff.h>
82#include <linux/init.h>
83#include <linux/spinlock.h>
84#include <linux/ethtool.h>
85#include <linux/mii.h>
86#include <linux/crc32.h>
87#include <linux/bitops.h>
88#include <asm/io.h>
89#include <asm/uaccess.h>
90#include <asm/byteorder.h>
91
92/* These identify the driver base version and may not be removed. */
93static char version[] __devinitdata =
94DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>\n";
95static char version2[] __devinitdata =
96" (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
97
98MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
99MODULE_DESCRIPTION("SMC 83c170 EPIC series Ethernet driver");
100MODULE_LICENSE("GPL");
101
102module_param(debug, int, 0);
103module_param(rx_copybreak, int, 0);
104module_param_array(options, int, NULL, 0);
105module_param_array(full_duplex, int, NULL, 0);
106MODULE_PARM_DESC(debug, "EPIC/100 debug level (0-5)");
107MODULE_PARM_DESC(options, "EPIC/100: Bits 0-3: media type, bit 4: full duplex");
108MODULE_PARM_DESC(rx_copybreak, "EPIC/100 copy breakpoint for copy-only-tiny-frames");
109MODULE_PARM_DESC(full_duplex, "EPIC/100 full duplex setting(s) (1)");
110
111/*
112 Theory of Operation
113
114I. Board Compatibility
115
116This device driver is designed for the SMC "EPIC/100", the SMC
117single-chip Ethernet controllers for PCI. This chip is used on
118the SMC EtherPower II boards.
119
120II. Board-specific settings
121
122PCI bus devices are configured by the system at boot time, so no jumpers
123need to be set on the board. The system BIOS will assign the
124PCI INTA signal to a (preferably otherwise unused) system IRQ line.
125Note: Kernel versions earlier than 1.3.73 do not support shared PCI
126interrupt lines.
127
128III. Driver operation
129
130IIIa. Ring buffers
131
132IVb. References
133
134http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf
135http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf
136http://scyld.com/expert/NWay.html
137http://www.national.com/pf/DP/DP83840A.html
138
139IVc. Errata
140
141*/
142
143
144enum chip_capability_flags { MII_PWRDWN=1, TYPE2_INTR=2, NO_MII=4 };
145
146#define EPIC_TOTAL_SIZE 0x100
147#define USE_IO_OPS 1
148
149typedef enum {
150 SMSC_83C170_0,
151 SMSC_83C170,
152 SMSC_83C175,
153} chip_t;
154
155
156struct epic_chip_info {
157 const char *name;
158 int drv_flags; /* Driver use, intended as capability flags. */
159};
160
161
162/* indexed by chip_t */
163static const struct epic_chip_info pci_id_tbl[] = {
164 { "SMSC EPIC/100 83c170", TYPE2_INTR | NO_MII | MII_PWRDWN },
165 { "SMSC EPIC/100 83c170", TYPE2_INTR },
166 { "SMSC EPIC/C 83c175", TYPE2_INTR | MII_PWRDWN },
167};
168
169
170static DEFINE_PCI_DEVICE_TABLE(epic_pci_tbl) = {
171 { 0x10B8, 0x0005, 0x1092, 0x0AB4, 0, 0, SMSC_83C170_0 },
172 { 0x10B8, 0x0005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMSC_83C170 },
173 { 0x10B8, 0x0006, PCI_ANY_ID, PCI_ANY_ID,
174 PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, SMSC_83C175 },
175 { 0,}
176};
177MODULE_DEVICE_TABLE (pci, epic_pci_tbl);
178
179
180#ifndef USE_IO_OPS
181#undef inb
182#undef inw
183#undef inl
184#undef outb
185#undef outw
186#undef outl
187#define inb readb
188#define inw readw
189#define inl readl
190#define outb writeb
191#define outw writew
192#define outl writel
193#endif
194
195/* Offsets to registers, using the (ugh) SMC names. */
196enum epic_registers {
197 COMMAND=0, INTSTAT=4, INTMASK=8, GENCTL=0x0C, NVCTL=0x10, EECTL=0x14,
198 PCIBurstCnt=0x18,
199 TEST1=0x1C, CRCCNT=0x20, ALICNT=0x24, MPCNT=0x28, /* Rx error counters. */
200 MIICtrl=0x30, MIIData=0x34, MIICfg=0x38,
201 LAN0=64, /* MAC address. */
202 MC0=80, /* Multicast filter table. */
203 RxCtrl=96, TxCtrl=112, TxSTAT=0x74,
204 PRxCDAR=0x84, RxSTAT=0xA4, EarlyRx=0xB0, PTxCDAR=0xC4, TxThresh=0xDC,
205};
206
207/* Interrupt register bits, using my own meaningful names. */
208enum IntrStatus {
209 TxIdle=0x40000, RxIdle=0x20000, IntrSummary=0x010000,
210 PCIBusErr170=0x7000, PCIBusErr175=0x1000, PhyEvent175=0x8000,
211 RxStarted=0x0800, RxEarlyWarn=0x0400, CntFull=0x0200, TxUnderrun=0x0100,
212 TxEmpty=0x0080, TxDone=0x0020, RxError=0x0010,
213 RxOverflow=0x0008, RxFull=0x0004, RxHeader=0x0002, RxDone=0x0001,
214};
215enum CommandBits {
216 StopRx=1, StartRx=2, TxQueued=4, RxQueued=8,
217 StopTxDMA=0x20, StopRxDMA=0x40, RestartTx=0x80,
218};
219
220#define EpicRemoved 0xffffffff /* Chip failed or removed (CardBus) */
221
222#define EpicNapiEvent (TxEmpty | TxDone | \
223 RxDone | RxStarted | RxEarlyWarn | RxOverflow | RxFull)
224#define EpicNormalEvent (0x0000ffff & ~EpicNapiEvent)
225
226static const u16 media2miictl[16] = {
227 0, 0x0C00, 0x0C00, 0x2000, 0x0100, 0x2100, 0, 0,
228 0, 0, 0, 0, 0, 0, 0, 0 };
229
230/*
231 * The EPIC100 Rx and Tx buffer descriptors. Note that these
232 * really ARE host-endian; it's not a misannotation. We tell
233 * the card to byteswap them internally on big-endian hosts -
234 * look for #ifdef __BIG_ENDIAN in epic_open().
235 */
236
237struct epic_tx_desc {
238 u32 txstatus;
239 u32 bufaddr;
240 u32 buflength;
241 u32 next;
242};
243
244struct epic_rx_desc {
245 u32 rxstatus;
246 u32 bufaddr;
247 u32 buflength;
248 u32 next;
249};
250
251enum desc_status_bits {
252 DescOwn=0x8000,
253};
254
255#define PRIV_ALIGN 15 /* Required alignment mask */
256struct epic_private {
257 struct epic_rx_desc *rx_ring;
258 struct epic_tx_desc *tx_ring;
259 /* The saved address of a sent-in-place packet/buffer, for skfree(). */
260 struct sk_buff* tx_skbuff[TX_RING_SIZE];
261 /* The addresses of receive-in-place skbuffs. */
262 struct sk_buff* rx_skbuff[RX_RING_SIZE];
263
264 dma_addr_t tx_ring_dma;
265 dma_addr_t rx_ring_dma;
266
267 /* Ring pointers. */
268 spinlock_t lock; /* Group with Tx control cache line. */
269 spinlock_t napi_lock;
270 struct napi_struct napi;
271 unsigned int reschedule_in_poll;
272 unsigned int cur_tx, dirty_tx;
273
274 unsigned int cur_rx, dirty_rx;
275 u32 irq_mask;
276 unsigned int rx_buf_sz; /* Based on MTU+slack. */
277
278 struct pci_dev *pci_dev; /* PCI bus location. */
279 int chip_id, chip_flags;
280
281 struct timer_list timer; /* Media selection timer. */
282 int tx_threshold;
283 unsigned char mc_filter[8];
284 signed char phys[4]; /* MII device addresses. */
285 u16 advertising; /* NWay media advertisement */
286 int mii_phy_cnt;
287 struct mii_if_info mii;
288 unsigned int tx_full:1; /* The Tx queue is full. */
289 unsigned int default_port:4; /* Last dev->if_port value. */
290};
291
292static int epic_open(struct net_device *dev);
293static int read_eeprom(long ioaddr, int location);
294static int mdio_read(struct net_device *dev, int phy_id, int location);
295static void mdio_write(struct net_device *dev, int phy_id, int loc, int val);
296static void epic_restart(struct net_device *dev);
297static void epic_timer(unsigned long data);
298static void epic_tx_timeout(struct net_device *dev);
299static void epic_init_ring(struct net_device *dev);
300static netdev_tx_t epic_start_xmit(struct sk_buff *skb,
301 struct net_device *dev);
302static int epic_rx(struct net_device *dev, int budget);
303static int epic_poll(struct napi_struct *napi, int budget);
304static irqreturn_t epic_interrupt(int irq, void *dev_instance);
305static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
306static const struct ethtool_ops netdev_ethtool_ops;
307static int epic_close(struct net_device *dev);
308static struct net_device_stats *epic_get_stats(struct net_device *dev);
309static void set_rx_mode(struct net_device *dev);
310
311static const struct net_device_ops epic_netdev_ops = {
312 .ndo_open = epic_open,
313 .ndo_stop = epic_close,
314 .ndo_start_xmit = epic_start_xmit,
315 .ndo_tx_timeout = epic_tx_timeout,
316 .ndo_get_stats = epic_get_stats,
317 .ndo_set_multicast_list = set_rx_mode,
318 .ndo_do_ioctl = netdev_ioctl,
319 .ndo_change_mtu = eth_change_mtu,
320 .ndo_set_mac_address = eth_mac_addr,
321 .ndo_validate_addr = eth_validate_addr,
322};
323
324static int __devinit epic_init_one (struct pci_dev *pdev,
325 const struct pci_device_id *ent)
326{
327 static int card_idx = -1;
328 long ioaddr;
329 int chip_idx = (int) ent->driver_data;
330 int irq;
331 struct net_device *dev;
332 struct epic_private *ep;
333 int i, ret, option = 0, duplex = 0;
334 void *ring_space;
335 dma_addr_t ring_dma;
336
337/* when built into the kernel, we only print version if device is found */
338#ifndef MODULE
339 static int printed_version;
340 if (!printed_version++)
341 printk(KERN_INFO "%s%s", version, version2);
342#endif
343
344 card_idx++;
345
346 ret = pci_enable_device(pdev);
347 if (ret)
348 goto out;
349 irq = pdev->irq;
350
351 if (pci_resource_len(pdev, 0) < EPIC_TOTAL_SIZE) {
352 dev_err(&pdev->dev, "no PCI region space\n");
353 ret = -ENODEV;
354 goto err_out_disable;
355 }
356
357 pci_set_master(pdev);
358
359 ret = pci_request_regions(pdev, DRV_NAME);
360 if (ret < 0)
361 goto err_out_disable;
362
363 ret = -ENOMEM;
364
365 dev = alloc_etherdev(sizeof (*ep));
366 if (!dev) {
367 dev_err(&pdev->dev, "no memory for eth device\n");
368 goto err_out_free_res;
369 }
370 SET_NETDEV_DEV(dev, &pdev->dev);
371
372#ifdef USE_IO_OPS
373 ioaddr = pci_resource_start (pdev, 0);
374#else
375 ioaddr = pci_resource_start (pdev, 1);
376 ioaddr = (long) pci_ioremap_bar(pdev, 1);
377 if (!ioaddr) {
378 dev_err(&pdev->dev, "ioremap failed\n");
379 goto err_out_free_netdev;
380 }
381#endif
382
383 pci_set_drvdata(pdev, dev);
384 ep = netdev_priv(dev);
385 ep->mii.dev = dev;
386 ep->mii.mdio_read = mdio_read;
387 ep->mii.mdio_write = mdio_write;
388 ep->mii.phy_id_mask = 0x1f;
389 ep->mii.reg_num_mask = 0x1f;
390
391 ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma);
392 if (!ring_space)
393 goto err_out_iounmap;
394 ep->tx_ring = ring_space;
395 ep->tx_ring_dma = ring_dma;
396
397 ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma);
398 if (!ring_space)
399 goto err_out_unmap_tx;
400 ep->rx_ring = ring_space;
401 ep->rx_ring_dma = ring_dma;
402
403 if (dev->mem_start) {
404 option = dev->mem_start;
405 duplex = (dev->mem_start & 16) ? 1 : 0;
406 } else if (card_idx >= 0 && card_idx < MAX_UNITS) {
407 if (options[card_idx] >= 0)
408 option = options[card_idx];
409 if (full_duplex[card_idx] >= 0)
410 duplex = full_duplex[card_idx];
411 }
412
413 dev->base_addr = ioaddr;
414 dev->irq = irq;
415
416 spin_lock_init(&ep->lock);
417 spin_lock_init(&ep->napi_lock);
418 ep->reschedule_in_poll = 0;
419
420 /* Bring the chip out of low-power mode. */
421 outl(0x4200, ioaddr + GENCTL);
422 /* Magic?! If we don't set this bit the MII interface won't work. */
423 /* This magic is documented in SMSC app note 7.15 */
424 for (i = 16; i > 0; i--)
425 outl(0x0008, ioaddr + TEST1);
426
427 /* Turn on the MII transceiver. */
428 outl(0x12, ioaddr + MIICfg);
429 if (chip_idx == 1)
430 outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
431 outl(0x0200, ioaddr + GENCTL);
432
433 /* Note: the '175 does not have a serial EEPROM. */
434 for (i = 0; i < 3; i++)
435 ((__le16 *)dev->dev_addr)[i] = cpu_to_le16(inw(ioaddr + LAN0 + i*4));
436
437 if (debug > 2) {
438 dev_printk(KERN_DEBUG, &pdev->dev, "EEPROM contents:\n");
439 for (i = 0; i < 64; i++)
440 printk(" %4.4x%s", read_eeprom(ioaddr, i),
441 i % 16 == 15 ? "\n" : "");
442 }
443
444 ep->pci_dev = pdev;
445 ep->chip_id = chip_idx;
446 ep->chip_flags = pci_id_tbl[chip_idx].drv_flags;
447 ep->irq_mask =
448 (ep->chip_flags & TYPE2_INTR ? PCIBusErr175 : PCIBusErr170)
449 | CntFull | TxUnderrun | EpicNapiEvent;
450
451 /* Find the connected MII xcvrs.
452 Doing this in open() would allow detecting external xcvrs later, but
453 takes much time and no cards have external MII. */
454 {
455 int phy, phy_idx = 0;
456 for (phy = 1; phy < 32 && phy_idx < sizeof(ep->phys); phy++) {
457 int mii_status = mdio_read(dev, phy, MII_BMSR);
458 if (mii_status != 0xffff && mii_status != 0x0000) {
459 ep->phys[phy_idx++] = phy;
460 dev_info(&pdev->dev,
461 "MII transceiver #%d control "
462 "%4.4x status %4.4x.\n",
463 phy, mdio_read(dev, phy, 0), mii_status);
464 }
465 }
466 ep->mii_phy_cnt = phy_idx;
467 if (phy_idx != 0) {
468 phy = ep->phys[0];
469 ep->mii.advertising = mdio_read(dev, phy, MII_ADVERTISE);
470 dev_info(&pdev->dev,
471 "Autonegotiation advertising %4.4x link "
472 "partner %4.4x.\n",
473 ep->mii.advertising, mdio_read(dev, phy, 5));
474 } else if ( ! (ep->chip_flags & NO_MII)) {
475 dev_warn(&pdev->dev,
476 "***WARNING***: No MII transceiver found!\n");
477 /* Use the known PHY address of the EPII. */
478 ep->phys[0] = 3;
479 }
480 ep->mii.phy_id = ep->phys[0];
481 }
482
483 /* Turn off the MII xcvr (175 only!), leave the chip in low-power mode. */
484 if (ep->chip_flags & MII_PWRDWN)
485 outl(inl(ioaddr + NVCTL) & ~0x483C, ioaddr + NVCTL);
486 outl(0x0008, ioaddr + GENCTL);
487
488 /* The lower four bits are the media type. */
489 if (duplex) {
490 ep->mii.force_media = ep->mii.full_duplex = 1;
491 dev_info(&pdev->dev, "Forced full duplex requested.\n");
492 }
493 dev->if_port = ep->default_port = option;
494
495 /* The Epic-specific entries in the device structure. */
496 dev->netdev_ops = &epic_netdev_ops;
497 dev->ethtool_ops = &netdev_ethtool_ops;
498 dev->watchdog_timeo = TX_TIMEOUT;
499 netif_napi_add(dev, &ep->napi, epic_poll, 64);
500
501 ret = register_netdev(dev);
502 if (ret < 0)
503 goto err_out_unmap_rx;
504
505 printk(KERN_INFO "%s: %s at %#lx, IRQ %d, %pM\n",
506 dev->name, pci_id_tbl[chip_idx].name, ioaddr, dev->irq,
507 dev->dev_addr);
508
509out:
510 return ret;
511
512err_out_unmap_rx:
513 pci_free_consistent(pdev, RX_TOTAL_SIZE, ep->rx_ring, ep->rx_ring_dma);
514err_out_unmap_tx:
515 pci_free_consistent(pdev, TX_TOTAL_SIZE, ep->tx_ring, ep->tx_ring_dma);
516err_out_iounmap:
517#ifndef USE_IO_OPS
518 iounmap(ioaddr);
519err_out_free_netdev:
520#endif
521 free_netdev(dev);
522err_out_free_res:
523 pci_release_regions(pdev);
524err_out_disable:
525 pci_disable_device(pdev);
526 goto out;
527}
528
529/* Serial EEPROM section. */
530
531/* EEPROM_Ctrl bits. */
532#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
533#define EE_CS 0x02 /* EEPROM chip select. */
534#define EE_DATA_WRITE 0x08 /* EEPROM chip data in. */
535#define EE_WRITE_0 0x01
536#define EE_WRITE_1 0x09
537#define EE_DATA_READ 0x10 /* EEPROM chip data out. */
538#define EE_ENB (0x0001 | EE_CS)
539
540/* Delay between EEPROM clock transitions.
541 This serves to flush the operation to the PCI bus.
542 */
543
544#define eeprom_delay() inl(ee_addr)
545
546/* The EEPROM commands include the alway-set leading bit. */
547#define EE_WRITE_CMD (5 << 6)
548#define EE_READ64_CMD (6 << 6)
549#define EE_READ256_CMD (6 << 8)
550#define EE_ERASE_CMD (7 << 6)
551
552static void epic_disable_int(struct net_device *dev, struct epic_private *ep)
553{
554 long ioaddr = dev->base_addr;
555
556 outl(0x00000000, ioaddr + INTMASK);
557}
558
559static inline void __epic_pci_commit(long ioaddr)
560{
561#ifndef USE_IO_OPS
562 inl(ioaddr + INTMASK);
563#endif
564}
565
566static inline void epic_napi_irq_off(struct net_device *dev,
567 struct epic_private *ep)
568{
569 long ioaddr = dev->base_addr;
570
571 outl(ep->irq_mask & ~EpicNapiEvent, ioaddr + INTMASK);
572 __epic_pci_commit(ioaddr);
573}
574
575static inline void epic_napi_irq_on(struct net_device *dev,
576 struct epic_private *ep)
577{
578 long ioaddr = dev->base_addr;
579
580 /* No need to commit possible posted write */
581 outl(ep->irq_mask | EpicNapiEvent, ioaddr + INTMASK);
582}
583
584static int __devinit read_eeprom(long ioaddr, int location)
585{
586 int i;
587 int retval = 0;
588 long ee_addr = ioaddr + EECTL;
589 int read_cmd = location |
590 (inl(ee_addr) & 0x40 ? EE_READ64_CMD : EE_READ256_CMD);
591
592 outl(EE_ENB & ~EE_CS, ee_addr);
593 outl(EE_ENB, ee_addr);
594
595 /* Shift the read command bits out. */
596 for (i = 12; i >= 0; i--) {
597 short dataval = (read_cmd & (1 << i)) ? EE_WRITE_1 : EE_WRITE_0;
598 outl(EE_ENB | dataval, ee_addr);
599 eeprom_delay();
600 outl(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
601 eeprom_delay();
602 }
603 outl(EE_ENB, ee_addr);
604
605 for (i = 16; i > 0; i--) {
606 outl(EE_ENB | EE_SHIFT_CLK, ee_addr);
607 eeprom_delay();
608 retval = (retval << 1) | ((inl(ee_addr) & EE_DATA_READ) ? 1 : 0);
609 outl(EE_ENB, ee_addr);
610 eeprom_delay();
611 }
612
613 /* Terminate the EEPROM access. */
614 outl(EE_ENB & ~EE_CS, ee_addr);
615 return retval;
616}
617
618#define MII_READOP 1
619#define MII_WRITEOP 2
620static int mdio_read(struct net_device *dev, int phy_id, int location)
621{
622 long ioaddr = dev->base_addr;
623 int read_cmd = (phy_id << 9) | (location << 4) | MII_READOP;
624 int i;
625
626 outl(read_cmd, ioaddr + MIICtrl);
627 /* Typical operation takes 25 loops. */
628 for (i = 400; i > 0; i--) {
629 barrier();
630 if ((inl(ioaddr + MIICtrl) & MII_READOP) == 0) {
631 /* Work around read failure bug. */
632 if (phy_id == 1 && location < 6 &&
633 inw(ioaddr + MIIData) == 0xffff) {
634 outl(read_cmd, ioaddr + MIICtrl);
635 continue;
636 }
637 return inw(ioaddr + MIIData);
638 }
639 }
640 return 0xffff;
641}
642
643static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
644{
645 long ioaddr = dev->base_addr;
646 int i;
647
648 outw(value, ioaddr + MIIData);
649 outl((phy_id << 9) | (loc << 4) | MII_WRITEOP, ioaddr + MIICtrl);
650 for (i = 10000; i > 0; i--) {
651 barrier();
652 if ((inl(ioaddr + MIICtrl) & MII_WRITEOP) == 0)
653 break;
654 }
655}
656
657
658static int epic_open(struct net_device *dev)
659{
660 struct epic_private *ep = netdev_priv(dev);
661 long ioaddr = dev->base_addr;
662 int i;
663 int retval;
664
665 /* Soft reset the chip. */
666 outl(0x4001, ioaddr + GENCTL);
667
668 napi_enable(&ep->napi);
669 if ((retval = request_irq(dev->irq, epic_interrupt, IRQF_SHARED, dev->name, dev))) {
670 napi_disable(&ep->napi);
671 return retval;
672 }
673
674 epic_init_ring(dev);
675
676 outl(0x4000, ioaddr + GENCTL);
677 /* This magic is documented in SMSC app note 7.15 */
678 for (i = 16; i > 0; i--)
679 outl(0x0008, ioaddr + TEST1);
680
681 /* Pull the chip out of low-power mode, enable interrupts, and set for
682 PCI read multiple. The MIIcfg setting and strange write order are
683 required by the details of which bits are reset and the transceiver
684 wiring on the Ositech CardBus card.
685 */
686#if 0
687 outl(dev->if_port == 1 ? 0x13 : 0x12, ioaddr + MIICfg);
688#endif
689 if (ep->chip_flags & MII_PWRDWN)
690 outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
691
692 /* Tell the chip to byteswap descriptors on big-endian hosts */
693#ifdef __BIG_ENDIAN
694 outl(0x4432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
695 inl(ioaddr + GENCTL);
696 outl(0x0432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
697#else
698 outl(0x4412 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
699 inl(ioaddr + GENCTL);
700 outl(0x0412 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
701#endif
702
703 udelay(20); /* Looks like EPII needs that if you want reliable RX init. FIXME: pci posting bug? */
704
705 for (i = 0; i < 3; i++)
706 outl(le16_to_cpu(((__le16*)dev->dev_addr)[i]), ioaddr + LAN0 + i*4);
707
708 ep->tx_threshold = TX_FIFO_THRESH;
709 outl(ep->tx_threshold, ioaddr + TxThresh);
710
711 if (media2miictl[dev->if_port & 15]) {
712 if (ep->mii_phy_cnt)
713 mdio_write(dev, ep->phys[0], MII_BMCR, media2miictl[dev->if_port&15]);
714 if (dev->if_port == 1) {
715 if (debug > 1)
716 printk(KERN_INFO "%s: Using the 10base2 transceiver, MII "
717 "status %4.4x.\n",
718 dev->name, mdio_read(dev, ep->phys[0], MII_BMSR));
719 }
720 } else {
721 int mii_lpa = mdio_read(dev, ep->phys[0], MII_LPA);
722 if (mii_lpa != 0xffff) {
723 if ((mii_lpa & LPA_100FULL) || (mii_lpa & 0x01C0) == LPA_10FULL)
724 ep->mii.full_duplex = 1;
725 else if (! (mii_lpa & LPA_LPACK))
726 mdio_write(dev, ep->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART);
727 if (debug > 1)
728 printk(KERN_INFO "%s: Setting %s-duplex based on MII xcvr %d"
729 " register read of %4.4x.\n", dev->name,
730 ep->mii.full_duplex ? "full" : "half",
731 ep->phys[0], mii_lpa);
732 }
733 }
734
735 outl(ep->mii.full_duplex ? 0x7F : 0x79, ioaddr + TxCtrl);
736 outl(ep->rx_ring_dma, ioaddr + PRxCDAR);
737 outl(ep->tx_ring_dma, ioaddr + PTxCDAR);
738
739 /* Start the chip's Rx process. */
740 set_rx_mode(dev);
741 outl(StartRx | RxQueued, ioaddr + COMMAND);
742
743 netif_start_queue(dev);
744
745 /* Enable interrupts by setting the interrupt mask. */
746 outl((ep->chip_flags & TYPE2_INTR ? PCIBusErr175 : PCIBusErr170)
747 | CntFull | TxUnderrun
748 | RxError | RxHeader | EpicNapiEvent, ioaddr + INTMASK);
749
750 if (debug > 1)
751 printk(KERN_DEBUG "%s: epic_open() ioaddr %lx IRQ %d status %4.4x "
752 "%s-duplex.\n",
753 dev->name, ioaddr, dev->irq, (int)inl(ioaddr + GENCTL),
754 ep->mii.full_duplex ? "full" : "half");
755
756 /* Set the timer to switch to check for link beat and perhaps switch
757 to an alternate media type. */
758 init_timer(&ep->timer);
759 ep->timer.expires = jiffies + 3*HZ;
760 ep->timer.data = (unsigned long)dev;
761 ep->timer.function = epic_timer; /* timer handler */
762 add_timer(&ep->timer);
763
764 return 0;
765}
766
767/* Reset the chip to recover from a PCI transaction error.
768 This may occur at interrupt time. */
769static void epic_pause(struct net_device *dev)
770{
771 long ioaddr = dev->base_addr;
772
773 netif_stop_queue (dev);
774
775 /* Disable interrupts by clearing the interrupt mask. */
776 outl(0x00000000, ioaddr + INTMASK);
777 /* Stop the chip's Tx and Rx DMA processes. */
778 outw(StopRx | StopTxDMA | StopRxDMA, ioaddr + COMMAND);
779
780 /* Update the error counts. */
781 if (inw(ioaddr + COMMAND) != 0xffff) {
782 dev->stats.rx_missed_errors += inb(ioaddr + MPCNT);
783 dev->stats.rx_frame_errors += inb(ioaddr + ALICNT);
784 dev->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
785 }
786
787 /* Remove the packets on the Rx queue. */
788 epic_rx(dev, RX_RING_SIZE);
789}
790
791static void epic_restart(struct net_device *dev)
792{
793 long ioaddr = dev->base_addr;
794 struct epic_private *ep = netdev_priv(dev);
795 int i;
796
797 /* Soft reset the chip. */
798 outl(0x4001, ioaddr + GENCTL);
799
800 printk(KERN_DEBUG "%s: Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n",
801 dev->name, ep->cur_rx, ep->dirty_rx, ep->dirty_tx, ep->cur_tx);
802 udelay(1);
803
804 /* This magic is documented in SMSC app note 7.15 */
805 for (i = 16; i > 0; i--)
806 outl(0x0008, ioaddr + TEST1);
807
808#ifdef __BIG_ENDIAN
809 outl(0x0432 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
810#else
811 outl(0x0412 | (RX_FIFO_THRESH<<8), ioaddr + GENCTL);
812#endif
813 outl(dev->if_port == 1 ? 0x13 : 0x12, ioaddr + MIICfg);
814 if (ep->chip_flags & MII_PWRDWN)
815 outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
816
817 for (i = 0; i < 3; i++)
818 outl(le16_to_cpu(((__le16*)dev->dev_addr)[i]), ioaddr + LAN0 + i*4);
819
820 ep->tx_threshold = TX_FIFO_THRESH;
821 outl(ep->tx_threshold, ioaddr + TxThresh);
822 outl(ep->mii.full_duplex ? 0x7F : 0x79, ioaddr + TxCtrl);
823 outl(ep->rx_ring_dma + (ep->cur_rx%RX_RING_SIZE)*
824 sizeof(struct epic_rx_desc), ioaddr + PRxCDAR);
825 outl(ep->tx_ring_dma + (ep->dirty_tx%TX_RING_SIZE)*
826 sizeof(struct epic_tx_desc), ioaddr + PTxCDAR);
827
828 /* Start the chip's Rx process. */
829 set_rx_mode(dev);
830 outl(StartRx | RxQueued, ioaddr + COMMAND);
831
832 /* Enable interrupts by setting the interrupt mask. */
833 outl((ep->chip_flags & TYPE2_INTR ? PCIBusErr175 : PCIBusErr170)
834 | CntFull | TxUnderrun
835 | RxError | RxHeader | EpicNapiEvent, ioaddr + INTMASK);
836
837 printk(KERN_DEBUG "%s: epic_restart() done, cmd status %4.4x, ctl %4.4x"
838 " interrupt %4.4x.\n",
839 dev->name, (int)inl(ioaddr + COMMAND), (int)inl(ioaddr + GENCTL),
840 (int)inl(ioaddr + INTSTAT));
841}
842
843static void check_media(struct net_device *dev)
844{
845 struct epic_private *ep = netdev_priv(dev);
846 long ioaddr = dev->base_addr;
847 int mii_lpa = ep->mii_phy_cnt ? mdio_read(dev, ep->phys[0], MII_LPA) : 0;
848 int negotiated = mii_lpa & ep->mii.advertising;
849 int duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040;
850
851 if (ep->mii.force_media)
852 return;
853 if (mii_lpa == 0xffff) /* Bogus read */
854 return;
855 if (ep->mii.full_duplex != duplex) {
856 ep->mii.full_duplex = duplex;
857 printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d link"
858 " partner capability of %4.4x.\n", dev->name,
859 ep->mii.full_duplex ? "full" : "half", ep->phys[0], mii_lpa);
860 outl(ep->mii.full_duplex ? 0x7F : 0x79, ioaddr + TxCtrl);
861 }
862}
863
864static void epic_timer(unsigned long data)
865{
866 struct net_device *dev = (struct net_device *)data;
867 struct epic_private *ep = netdev_priv(dev);
868 long ioaddr = dev->base_addr;
869 int next_tick = 5*HZ;
870
871 if (debug > 3) {
872 printk(KERN_DEBUG "%s: Media monitor tick, Tx status %8.8x.\n",
873 dev->name, (int)inl(ioaddr + TxSTAT));
874 printk(KERN_DEBUG "%s: Other registers are IntMask %4.4x "
875 "IntStatus %4.4x RxStatus %4.4x.\n",
876 dev->name, (int)inl(ioaddr + INTMASK),
877 (int)inl(ioaddr + INTSTAT), (int)inl(ioaddr + RxSTAT));
878 }
879
880 check_media(dev);
881
882 ep->timer.expires = jiffies + next_tick;
883 add_timer(&ep->timer);
884}
885
886static void epic_tx_timeout(struct net_device *dev)
887{
888 struct epic_private *ep = netdev_priv(dev);
889 long ioaddr = dev->base_addr;
890
891 if (debug > 0) {
892 printk(KERN_WARNING "%s: Transmit timeout using MII device, "
893 "Tx status %4.4x.\n",
894 dev->name, (int)inw(ioaddr + TxSTAT));
895 if (debug > 1) {
896 printk(KERN_DEBUG "%s: Tx indices: dirty_tx %d, cur_tx %d.\n",
897 dev->name, ep->dirty_tx, ep->cur_tx);
898 }
899 }
900 if (inw(ioaddr + TxSTAT) & 0x10) { /* Tx FIFO underflow. */
901 dev->stats.tx_fifo_errors++;
902 outl(RestartTx, ioaddr + COMMAND);
903 } else {
904 epic_restart(dev);
905 outl(TxQueued, dev->base_addr + COMMAND);
906 }
907
908 dev->trans_start = jiffies; /* prevent tx timeout */
909 dev->stats.tx_errors++;
910 if (!ep->tx_full)
911 netif_wake_queue(dev);
912}
913
914/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
915static void epic_init_ring(struct net_device *dev)
916{
917 struct epic_private *ep = netdev_priv(dev);
918 int i;
919
920 ep->tx_full = 0;
921 ep->dirty_tx = ep->cur_tx = 0;
922 ep->cur_rx = ep->dirty_rx = 0;
923 ep->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
924
925 /* Initialize all Rx descriptors. */
926 for (i = 0; i < RX_RING_SIZE; i++) {
927 ep->rx_ring[i].rxstatus = 0;
928 ep->rx_ring[i].buflength = ep->rx_buf_sz;
929 ep->rx_ring[i].next = ep->rx_ring_dma +
930 (i+1)*sizeof(struct epic_rx_desc);
931 ep->rx_skbuff[i] = NULL;
932 }
933 /* Mark the last entry as wrapping the ring. */
934 ep->rx_ring[i-1].next = ep->rx_ring_dma;
935
936 /* Fill in the Rx buffers. Handle allocation failure gracefully. */
937 for (i = 0; i < RX_RING_SIZE; i++) {
938 struct sk_buff *skb = dev_alloc_skb(ep->rx_buf_sz + 2);
939 ep->rx_skbuff[i] = skb;
940 if (skb == NULL)
941 break;
942 skb_reserve(skb, 2); /* 16 byte align the IP header. */
943 ep->rx_ring[i].bufaddr = pci_map_single(ep->pci_dev,
944 skb->data, ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
945 ep->rx_ring[i].rxstatus = DescOwn;
946 }
947 ep->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
948
949 /* The Tx buffer descriptor is filled in as needed, but we
950 do need to clear the ownership bit. */
951 for (i = 0; i < TX_RING_SIZE; i++) {
952 ep->tx_skbuff[i] = NULL;
953 ep->tx_ring[i].txstatus = 0x0000;
954 ep->tx_ring[i].next = ep->tx_ring_dma +
955 (i+1)*sizeof(struct epic_tx_desc);
956 }
957 ep->tx_ring[i-1].next = ep->tx_ring_dma;
958}
959
960static netdev_tx_t epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
961{
962 struct epic_private *ep = netdev_priv(dev);
963 int entry, free_count;
964 u32 ctrl_word;
965 unsigned long flags;
966
967 if (skb_padto(skb, ETH_ZLEN))
968 return NETDEV_TX_OK;
969
970 /* Caution: the write order is important here, set the field with the
971 "ownership" bit last. */
972
973 /* Calculate the next Tx descriptor entry. */
974 spin_lock_irqsave(&ep->lock, flags);
975 free_count = ep->cur_tx - ep->dirty_tx;
976 entry = ep->cur_tx % TX_RING_SIZE;
977
978 ep->tx_skbuff[entry] = skb;
979 ep->tx_ring[entry].bufaddr = pci_map_single(ep->pci_dev, skb->data,
980 skb->len, PCI_DMA_TODEVICE);
981 if (free_count < TX_QUEUE_LEN/2) {/* Typical path */
982 ctrl_word = 0x100000; /* No interrupt */
983 } else if (free_count == TX_QUEUE_LEN/2) {
984 ctrl_word = 0x140000; /* Tx-done intr. */
985 } else if (free_count < TX_QUEUE_LEN - 1) {
986 ctrl_word = 0x100000; /* No Tx-done intr. */
987 } else {
988 /* Leave room for an additional entry. */
989 ctrl_word = 0x140000; /* Tx-done intr. */
990 ep->tx_full = 1;
991 }
992 ep->tx_ring[entry].buflength = ctrl_word | skb->len;
993 ep->tx_ring[entry].txstatus =
994 ((skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN) << 16)
995 | DescOwn;
996
997 ep->cur_tx++;
998 if (ep->tx_full)
999 netif_stop_queue(dev);
1000
1001 spin_unlock_irqrestore(&ep->lock, flags);
1002 /* Trigger an immediate transmit demand. */
1003 outl(TxQueued, dev->base_addr + COMMAND);
1004
1005 if (debug > 4)
1006 printk(KERN_DEBUG "%s: Queued Tx packet size %d to slot %d, "
1007 "flag %2.2x Tx status %8.8x.\n",
1008 dev->name, (int)skb->len, entry, ctrl_word,
1009 (int)inl(dev->base_addr + TxSTAT));
1010
1011 return NETDEV_TX_OK;
1012}
1013
1014static void epic_tx_error(struct net_device *dev, struct epic_private *ep,
1015 int status)
1016{
1017 struct net_device_stats *stats = &dev->stats;
1018
1019#ifndef final_version
1020 /* There was an major error, log it. */
1021 if (debug > 1)
1022 printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
1023 dev->name, status);
1024#endif
1025 stats->tx_errors++;
1026 if (status & 0x1050)
1027 stats->tx_aborted_errors++;
1028 if (status & 0x0008)
1029 stats->tx_carrier_errors++;
1030 if (status & 0x0040)
1031 stats->tx_window_errors++;
1032 if (status & 0x0010)
1033 stats->tx_fifo_errors++;
1034}
1035
1036static void epic_tx(struct net_device *dev, struct epic_private *ep)
1037{
1038 unsigned int dirty_tx, cur_tx;
1039
1040 /*
1041 * Note: if this lock becomes a problem we can narrow the locked
1042 * region at the cost of occasionally grabbing the lock more times.
1043 */
1044 cur_tx = ep->cur_tx;
1045 for (dirty_tx = ep->dirty_tx; cur_tx - dirty_tx > 0; dirty_tx++) {
1046 struct sk_buff *skb;
1047 int entry = dirty_tx % TX_RING_SIZE;
1048 int txstatus = ep->tx_ring[entry].txstatus;
1049
1050 if (txstatus & DescOwn)
1051 break; /* It still hasn't been Txed */
1052
1053 if (likely(txstatus & 0x0001)) {
1054 dev->stats.collisions += (txstatus >> 8) & 15;
1055 dev->stats.tx_packets++;
1056 dev->stats.tx_bytes += ep->tx_skbuff[entry]->len;
1057 } else
1058 epic_tx_error(dev, ep, txstatus);
1059
1060 /* Free the original skb. */
1061 skb = ep->tx_skbuff[entry];
1062 pci_unmap_single(ep->pci_dev, ep->tx_ring[entry].bufaddr,
1063 skb->len, PCI_DMA_TODEVICE);
1064 dev_kfree_skb_irq(skb);
1065 ep->tx_skbuff[entry] = NULL;
1066 }
1067
1068#ifndef final_version
1069 if (cur_tx - dirty_tx > TX_RING_SIZE) {
1070 printk(KERN_WARNING
1071 "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
1072 dev->name, dirty_tx, cur_tx, ep->tx_full);
1073 dirty_tx += TX_RING_SIZE;
1074 }
1075#endif
1076 ep->dirty_tx = dirty_tx;
1077 if (ep->tx_full && cur_tx - dirty_tx < TX_QUEUE_LEN - 4) {
1078 /* The ring is no longer full, allow new TX entries. */
1079 ep->tx_full = 0;
1080 netif_wake_queue(dev);
1081 }
1082}
1083
1084/* The interrupt handler does all of the Rx thread work and cleans up
1085 after the Tx thread. */
1086static irqreturn_t epic_interrupt(int irq, void *dev_instance)
1087{
1088 struct net_device *dev = dev_instance;
1089 struct epic_private *ep = netdev_priv(dev);
1090 long ioaddr = dev->base_addr;
1091 unsigned int handled = 0;
1092 int status;
1093
1094 status = inl(ioaddr + INTSTAT);
1095 /* Acknowledge all of the current interrupt sources ASAP. */
1096 outl(status & EpicNormalEvent, ioaddr + INTSTAT);
1097
1098 if (debug > 4) {
1099 printk(KERN_DEBUG "%s: Interrupt, status=%#8.8x new "
1100 "intstat=%#8.8x.\n", dev->name, status,
1101 (int)inl(ioaddr + INTSTAT));
1102 }
1103
1104 if ((status & IntrSummary) == 0)
1105 goto out;
1106
1107 handled = 1;
1108
1109 if ((status & EpicNapiEvent) && !ep->reschedule_in_poll) {
1110 spin_lock(&ep->napi_lock);
1111 if (napi_schedule_prep(&ep->napi)) {
1112 epic_napi_irq_off(dev, ep);
1113 __napi_schedule(&ep->napi);
1114 } else
1115 ep->reschedule_in_poll++;
1116 spin_unlock(&ep->napi_lock);
1117 }
1118 status &= ~EpicNapiEvent;
1119
1120 /* Check uncommon events all at once. */
1121 if (status & (CntFull | TxUnderrun | PCIBusErr170 | PCIBusErr175)) {
1122 if (status == EpicRemoved)
1123 goto out;
1124
1125 /* Always update the error counts to avoid overhead later. */
1126 dev->stats.rx_missed_errors += inb(ioaddr + MPCNT);
1127 dev->stats.rx_frame_errors += inb(ioaddr + ALICNT);
1128 dev->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
1129
1130 if (status & TxUnderrun) { /* Tx FIFO underflow. */
1131 dev->stats.tx_fifo_errors++;
1132 outl(ep->tx_threshold += 128, ioaddr + TxThresh);
1133 /* Restart the transmit process. */
1134 outl(RestartTx, ioaddr + COMMAND);
1135 }
1136 if (status & PCIBusErr170) {
1137 printk(KERN_ERR "%s: PCI Bus Error! status %4.4x.\n",
1138 dev->name, status);
1139 epic_pause(dev);
1140 epic_restart(dev);
1141 }
1142 /* Clear all error sources. */
1143 outl(status & 0x7f18, ioaddr + INTSTAT);
1144 }
1145
1146out:
1147 if (debug > 3) {
1148 printk(KERN_DEBUG "%s: exit interrupt, intr_status=%#4.4x.\n",
1149 dev->name, status);
1150 }
1151
1152 return IRQ_RETVAL(handled);
1153}
1154
1155static int epic_rx(struct net_device *dev, int budget)
1156{
1157 struct epic_private *ep = netdev_priv(dev);
1158 int entry = ep->cur_rx % RX_RING_SIZE;
1159 int rx_work_limit = ep->dirty_rx + RX_RING_SIZE - ep->cur_rx;
1160 int work_done = 0;
1161
1162 if (debug > 4)
1163 printk(KERN_DEBUG " In epic_rx(), entry %d %8.8x.\n", entry,
1164 ep->rx_ring[entry].rxstatus);
1165
1166 if (rx_work_limit > budget)
1167 rx_work_limit = budget;
1168
1169 /* If we own the next entry, it's a new packet. Send it up. */
1170 while ((ep->rx_ring[entry].rxstatus & DescOwn) == 0) {
1171 int status = ep->rx_ring[entry].rxstatus;
1172
1173 if (debug > 4)
1174 printk(KERN_DEBUG " epic_rx() status was %8.8x.\n", status);
1175 if (--rx_work_limit < 0)
1176 break;
1177 if (status & 0x2006) {
1178 if (debug > 2)
1179 printk(KERN_DEBUG "%s: epic_rx() error status was %8.8x.\n",
1180 dev->name, status);
1181 if (status & 0x2000) {
1182 printk(KERN_WARNING "%s: Oversized Ethernet frame spanned "
1183 "multiple buffers, status %4.4x!\n", dev->name, status);
1184 dev->stats.rx_length_errors++;
1185 } else if (status & 0x0006)
1186 /* Rx Frame errors are counted in hardware. */
1187 dev->stats.rx_errors++;
1188 } else {
1189 /* Malloc up new buffer, compatible with net-2e. */
1190 /* Omit the four octet CRC from the length. */
1191 short pkt_len = (status >> 16) - 4;
1192 struct sk_buff *skb;
1193
1194 if (pkt_len > PKT_BUF_SZ - 4) {
1195 printk(KERN_ERR "%s: Oversized Ethernet frame, status %x "
1196 "%d bytes.\n",
1197 dev->name, status, pkt_len);
1198 pkt_len = 1514;
1199 }
1200 /* Check if the packet is long enough to accept without copying
1201 to a minimally-sized skbuff. */
1202 if (pkt_len < rx_copybreak &&
1203 (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
1204 skb_reserve(skb, 2); /* 16 byte align the IP header */
1205 pci_dma_sync_single_for_cpu(ep->pci_dev,
1206 ep->rx_ring[entry].bufaddr,
1207 ep->rx_buf_sz,
1208 PCI_DMA_FROMDEVICE);
1209 skb_copy_to_linear_data(skb, ep->rx_skbuff[entry]->data, pkt_len);
1210 skb_put(skb, pkt_len);
1211 pci_dma_sync_single_for_device(ep->pci_dev,
1212 ep->rx_ring[entry].bufaddr,
1213 ep->rx_buf_sz,
1214 PCI_DMA_FROMDEVICE);
1215 } else {
1216 pci_unmap_single(ep->pci_dev,
1217 ep->rx_ring[entry].bufaddr,
1218 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
1219 skb_put(skb = ep->rx_skbuff[entry], pkt_len);
1220 ep->rx_skbuff[entry] = NULL;
1221 }
1222 skb->protocol = eth_type_trans(skb, dev);
1223 netif_receive_skb(skb);
1224 dev->stats.rx_packets++;
1225 dev->stats.rx_bytes += pkt_len;
1226 }
1227 work_done++;
1228 entry = (++ep->cur_rx) % RX_RING_SIZE;
1229 }
1230
1231 /* Refill the Rx ring buffers. */
1232 for (; ep->cur_rx - ep->dirty_rx > 0; ep->dirty_rx++) {
1233 entry = ep->dirty_rx % RX_RING_SIZE;
1234 if (ep->rx_skbuff[entry] == NULL) {
1235 struct sk_buff *skb;
1236 skb = ep->rx_skbuff[entry] = dev_alloc_skb(ep->rx_buf_sz + 2);
1237 if (skb == NULL)
1238 break;
1239 skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
1240 ep->rx_ring[entry].bufaddr = pci_map_single(ep->pci_dev,
1241 skb->data, ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
1242 work_done++;
1243 }
1244 /* AV: shouldn't we add a barrier here? */
1245 ep->rx_ring[entry].rxstatus = DescOwn;
1246 }
1247 return work_done;
1248}
1249
1250static void epic_rx_err(struct net_device *dev, struct epic_private *ep)
1251{
1252 long ioaddr = dev->base_addr;
1253 int status;
1254
1255 status = inl(ioaddr + INTSTAT);
1256
1257 if (status == EpicRemoved)
1258 return;
1259 if (status & RxOverflow) /* Missed a Rx frame. */
1260 dev->stats.rx_errors++;
1261 if (status & (RxOverflow | RxFull))
1262 outw(RxQueued, ioaddr + COMMAND);
1263}
1264
1265static int epic_poll(struct napi_struct *napi, int budget)
1266{
1267 struct epic_private *ep = container_of(napi, struct epic_private, napi);
1268 struct net_device *dev = ep->mii.dev;
1269 int work_done = 0;
1270 long ioaddr = dev->base_addr;
1271
1272rx_action:
1273
1274 epic_tx(dev, ep);
1275
1276 work_done += epic_rx(dev, budget);
1277
1278 epic_rx_err(dev, ep);
1279
1280 if (work_done < budget) {
1281 unsigned long flags;
1282 int more;
1283
1284 /* A bit baroque but it avoids a (space hungry) spin_unlock */
1285
1286 spin_lock_irqsave(&ep->napi_lock, flags);
1287
1288 more = ep->reschedule_in_poll;
1289 if (!more) {
1290 __napi_complete(napi);
1291 outl(EpicNapiEvent, ioaddr + INTSTAT);
1292 epic_napi_irq_on(dev, ep);
1293 } else
1294 ep->reschedule_in_poll--;
1295
1296 spin_unlock_irqrestore(&ep->napi_lock, flags);
1297
1298 if (more)
1299 goto rx_action;
1300 }
1301
1302 return work_done;
1303}
1304
1305static int epic_close(struct net_device *dev)
1306{
1307 long ioaddr = dev->base_addr;
1308 struct epic_private *ep = netdev_priv(dev);
1309 struct sk_buff *skb;
1310 int i;
1311
1312 netif_stop_queue(dev);
1313 napi_disable(&ep->napi);
1314
1315 if (debug > 1)
1316 printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
1317 dev->name, (int)inl(ioaddr + INTSTAT));
1318
1319 del_timer_sync(&ep->timer);
1320
1321 epic_disable_int(dev, ep);
1322
1323 free_irq(dev->irq, dev);
1324
1325 epic_pause(dev);
1326
1327 /* Free all the skbuffs in the Rx queue. */
1328 for (i = 0; i < RX_RING_SIZE; i++) {
1329 skb = ep->rx_skbuff[i];
1330 ep->rx_skbuff[i] = NULL;
1331 ep->rx_ring[i].rxstatus = 0; /* Not owned by Epic chip. */
1332 ep->rx_ring[i].buflength = 0;
1333 if (skb) {
1334 pci_unmap_single(ep->pci_dev, ep->rx_ring[i].bufaddr,
1335 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
1336 dev_kfree_skb(skb);
1337 }
1338 ep->rx_ring[i].bufaddr = 0xBADF00D0; /* An invalid address. */
1339 }
1340 for (i = 0; i < TX_RING_SIZE; i++) {
1341 skb = ep->tx_skbuff[i];
1342 ep->tx_skbuff[i] = NULL;
1343 if (!skb)
1344 continue;
1345 pci_unmap_single(ep->pci_dev, ep->tx_ring[i].bufaddr,
1346 skb->len, PCI_DMA_TODEVICE);
1347 dev_kfree_skb(skb);
1348 }
1349
1350 /* Green! Leave the chip in low-power mode. */
1351 outl(0x0008, ioaddr + GENCTL);
1352
1353 return 0;
1354}
1355
1356static struct net_device_stats *epic_get_stats(struct net_device *dev)
1357{
1358 long ioaddr = dev->base_addr;
1359
1360 if (netif_running(dev)) {
1361 /* Update the error counts. */
1362 dev->stats.rx_missed_errors += inb(ioaddr + MPCNT);
1363 dev->stats.rx_frame_errors += inb(ioaddr + ALICNT);
1364 dev->stats.rx_crc_errors += inb(ioaddr + CRCCNT);
1365 }
1366
1367 return &dev->stats;
1368}
1369
1370/* Set or clear the multicast filter for this adaptor.
1371 Note that we only use exclusion around actually queueing the
1372 new frame, not around filling ep->setup_frame. This is non-deterministic
1373 when re-entered but still correct. */
1374
1375static void set_rx_mode(struct net_device *dev)
1376{
1377 long ioaddr = dev->base_addr;
1378 struct epic_private *ep = netdev_priv(dev);
1379 unsigned char mc_filter[8]; /* Multicast hash filter */
1380 int i;
1381
1382 if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
1383 outl(0x002C, ioaddr + RxCtrl);
1384 /* Unconditionally log net taps. */
1385 memset(mc_filter, 0xff, sizeof(mc_filter));
1386 } else if ((!netdev_mc_empty(dev)) || (dev->flags & IFF_ALLMULTI)) {
1387 /* There is apparently a chip bug, so the multicast filter
1388 is never enabled. */
1389 /* Too many to filter perfectly -- accept all multicasts. */
1390 memset(mc_filter, 0xff, sizeof(mc_filter));
1391 outl(0x000C, ioaddr + RxCtrl);
1392 } else if (netdev_mc_empty(dev)) {
1393 outl(0x0004, ioaddr + RxCtrl);
1394 return;
1395 } else { /* Never executed, for now. */
1396 struct netdev_hw_addr *ha;
1397
1398 memset(mc_filter, 0, sizeof(mc_filter));
1399 netdev_for_each_mc_addr(ha, dev) {
1400 unsigned int bit_nr =
1401 ether_crc_le(ETH_ALEN, ha->addr) & 0x3f;
1402 mc_filter[bit_nr >> 3] |= (1 << bit_nr);
1403 }
1404 }
1405 /* ToDo: perhaps we need to stop the Tx and Rx process here? */
1406 if (memcmp(mc_filter, ep->mc_filter, sizeof(mc_filter))) {
1407 for (i = 0; i < 4; i++)
1408 outw(((u16 *)mc_filter)[i], ioaddr + MC0 + i*4);
1409 memcpy(ep->mc_filter, mc_filter, sizeof(mc_filter));
1410 }
1411}
1412
1413static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
1414{
1415 struct epic_private *np = netdev_priv(dev);
1416
1417 strcpy (info->driver, DRV_NAME);
1418 strcpy (info->version, DRV_VERSION);
1419 strcpy (info->bus_info, pci_name(np->pci_dev));
1420}
1421
1422static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1423{
1424 struct epic_private *np = netdev_priv(dev);
1425 int rc;
1426
1427 spin_lock_irq(&np->lock);
1428 rc = mii_ethtool_gset(&np->mii, cmd);
1429 spin_unlock_irq(&np->lock);
1430
1431 return rc;
1432}
1433
1434static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1435{
1436 struct epic_private *np = netdev_priv(dev);
1437 int rc;
1438
1439 spin_lock_irq(&np->lock);
1440 rc = mii_ethtool_sset(&np->mii, cmd);
1441 spin_unlock_irq(&np->lock);
1442
1443 return rc;
1444}
1445
1446static int netdev_nway_reset(struct net_device *dev)
1447{
1448 struct epic_private *np = netdev_priv(dev);
1449 return mii_nway_restart(&np->mii);
1450}
1451
1452static u32 netdev_get_link(struct net_device *dev)
1453{
1454 struct epic_private *np = netdev_priv(dev);
1455 return mii_link_ok(&np->mii);
1456}
1457
1458static u32 netdev_get_msglevel(struct net_device *dev)
1459{
1460 return debug;
1461}
1462
1463static void netdev_set_msglevel(struct net_device *dev, u32 value)
1464{
1465 debug = value;
1466}
1467
1468static int ethtool_begin(struct net_device *dev)
1469{
1470 unsigned long ioaddr = dev->base_addr;
1471 /* power-up, if interface is down */
1472 if (! netif_running(dev)) {
1473 outl(0x0200, ioaddr + GENCTL);
1474 outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
1475 }
1476 return 0;
1477}
1478
1479static void ethtool_complete(struct net_device *dev)
1480{
1481 unsigned long ioaddr = dev->base_addr;
1482 /* power-down, if interface is down */
1483 if (! netif_running(dev)) {
1484 outl(0x0008, ioaddr + GENCTL);
1485 outl((inl(ioaddr + NVCTL) & ~0x483C) | 0x0000, ioaddr + NVCTL);
1486 }
1487}
1488
1489static const struct ethtool_ops netdev_ethtool_ops = {
1490 .get_drvinfo = netdev_get_drvinfo,
1491 .get_settings = netdev_get_settings,
1492 .set_settings = netdev_set_settings,
1493 .nway_reset = netdev_nway_reset,
1494 .get_link = netdev_get_link,
1495 .get_msglevel = netdev_get_msglevel,
1496 .set_msglevel = netdev_set_msglevel,
1497 .begin = ethtool_begin,
1498 .complete = ethtool_complete
1499};
1500
1501static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1502{
1503 struct epic_private *np = netdev_priv(dev);
1504 long ioaddr = dev->base_addr;
1505 struct mii_ioctl_data *data = if_mii(rq);
1506 int rc;
1507
1508 /* power-up, if interface is down */
1509 if (! netif_running(dev)) {
1510 outl(0x0200, ioaddr + GENCTL);
1511 outl((inl(ioaddr + NVCTL) & ~0x003C) | 0x4800, ioaddr + NVCTL);
1512 }
1513
1514 /* all non-ethtool ioctls (the SIOC[GS]MIIxxx ioctls) */
1515 spin_lock_irq(&np->lock);
1516 rc = generic_mii_ioctl(&np->mii, data, cmd, NULL);
1517 spin_unlock_irq(&np->lock);
1518
1519 /* power-down, if interface is down */
1520 if (! netif_running(dev)) {
1521 outl(0x0008, ioaddr + GENCTL);
1522 outl((inl(ioaddr + NVCTL) & ~0x483C) | 0x0000, ioaddr + NVCTL);
1523 }
1524 return rc;
1525}
1526
1527
1528static void __devexit epic_remove_one (struct pci_dev *pdev)
1529{
1530 struct net_device *dev = pci_get_drvdata(pdev);
1531 struct epic_private *ep = netdev_priv(dev);
1532
1533 pci_free_consistent(pdev, TX_TOTAL_SIZE, ep->tx_ring, ep->tx_ring_dma);
1534 pci_free_consistent(pdev, RX_TOTAL_SIZE, ep->rx_ring, ep->rx_ring_dma);
1535 unregister_netdev(dev);
1536#ifndef USE_IO_OPS
1537 iounmap((void*) dev->base_addr);
1538#endif
1539 pci_release_regions(pdev);
1540 free_netdev(dev);
1541 pci_disable_device(pdev);
1542 pci_set_drvdata(pdev, NULL);
1543 /* pci_power_off(pdev, -1); */
1544}
1545
1546
1547#ifdef CONFIG_PM
1548
1549static int epic_suspend (struct pci_dev *pdev, pm_message_t state)
1550{
1551 struct net_device *dev = pci_get_drvdata(pdev);
1552 long ioaddr = dev->base_addr;
1553
1554 if (!netif_running(dev))
1555 return 0;
1556 epic_pause(dev);
1557 /* Put the chip into low-power mode. */
1558 outl(0x0008, ioaddr + GENCTL);
1559 /* pci_power_off(pdev, -1); */
1560 return 0;
1561}
1562
1563
1564static int epic_resume (struct pci_dev *pdev)
1565{
1566 struct net_device *dev = pci_get_drvdata(pdev);
1567
1568 if (!netif_running(dev))
1569 return 0;
1570 epic_restart(dev);
1571 /* pci_power_on(pdev); */
1572 return 0;
1573}
1574
1575#endif /* CONFIG_PM */
1576
1577
1578static struct pci_driver epic_driver = {
1579 .name = DRV_NAME,
1580 .id_table = epic_pci_tbl,
1581 .probe = epic_init_one,
1582 .remove = __devexit_p(epic_remove_one),
1583#ifdef CONFIG_PM
1584 .suspend = epic_suspend,
1585 .resume = epic_resume,
1586#endif /* CONFIG_PM */
1587};
1588
1589
1590static int __init epic_init (void)
1591{
1592/* when a module, this is printed whether or not devices are found in probe */
1593#ifdef MODULE
1594 printk (KERN_INFO "%s%s",
1595 version, version2);
1596#endif
1597
1598 return pci_register_driver(&epic_driver);
1599}
1600
1601
1602static void __exit epic_cleanup (void)
1603{
1604 pci_unregister_driver (&epic_driver);
1605}
1606
1607
1608module_init(epic_init);
1609module_exit(epic_cleanup);
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-14 11:47:34 -0500