1 files changed, 60 insertions, 27 deletions

diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 46a90e9ec563..c05cb159c772 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -400,26 +400,31 @@ enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data)
         mutex_unlock(&priv->lock);
 }
 
-/*
- * Wait until the PHY operation is complete.
- */
-static int wait_phy_ready(struct enc28j60_net *priv)
+static unsigned long msec20_to_jiffies;
+
+static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val)
 {
-        unsigned long timeout = jiffies + 20 * HZ / 1000;
-        int ret = 1;
+        unsigned long timeout = jiffies + msec20_to_jiffies;
 
         /* 20 msec timeout read */
-        while (nolock_regb_read(priv, MISTAT) & MISTAT_BUSY) {
+        while ((nolock_regb_read(priv, reg) & mask) != val) {
                 if (time_after(jiffies, timeout)) {
                         if (netif_msg_drv(priv))
-                                printk(KERN_DEBUG DRV_NAME
-                                        ": PHY ready timeout!\n");
-                        ret = 0;
-                        break;
+                                dev_dbg(&priv->spi->dev,
+                                        "reg %02x ready timeout!\n", reg);
+                        return -ETIMEDOUT;
                 }
                 cpu_relax();
         }
-        return ret;
+        return 0;
+}
+
+/*
+ * Wait until the PHY operation is complete.
+ */
+static int wait_phy_ready(struct enc28j60_net *priv)
+{
+        return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1;
 }
 
 /*
@@ -594,6 +599,32 @@ static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
         nolock_regw_write(priv, ETXNDL, end);
 }
 
+/*
+ * Low power mode shrinks power consumption about 100x, so we'd like
+ * the chip to be in that mode whenever it's inactive.  (However, we
+ * can't stay in lowpower mode during suspend with WOL active.)
+ */
+static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low)
+{
+        if (netif_msg_drv(priv))
+                dev_dbg(&priv->spi->dev, "%s power...\n",
+                                is_low ? "low" : "high");
+
+        mutex_lock(&priv->lock);
+        if (is_low) {
+                nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
+                poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
+                poll_ready(priv, ECON1, ECON1_TXRTS, 0);
+                /* ECON2_VRPS was set during initialization */
+                nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
+        } else {
+                nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
+                poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
+                /* caller sets ECON1_RXEN */
+        }
+        mutex_unlock(&priv->lock);
+}
+
 static int enc28j60_hw_init(struct enc28j60_net *priv)
 {
         u8 reg;
@@ -612,8 +643,8 @@ static int enc28j60_hw_init(struct enc28j60_net *priv)
         priv->tx_retry_count = 0;
         priv->max_pk_counter = 0;
         priv->rxfilter = RXFILTER_NORMAL;
-        /* enable address auto increment */
-        nolock_regb_write(priv, ECON2, ECON2_AUTOINC);
+        /* enable address auto increment and voltage regulator powersave */
+        nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS);
 
         nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
         nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
@@ -690,7 +721,7 @@ static int enc28j60_hw_init(struct enc28j60_net *priv)
 
 static void enc28j60_hw_enable(struct enc28j60_net *priv)
 {
-        /* enable interrutps */
+        /* enable interrupts */
         if (netif_msg_hw(priv))
                 printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
                         __FUNCTION__);
@@ -726,15 +757,12 @@ enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
         int ret = 0;
 
         if (!priv->hw_enable) {
-                if (autoneg == AUTONEG_DISABLE && speed == SPEED_10) {
+                /* link is in low power mode now; duplex setting
+                 * will take effect on next enc28j60_hw_init().
+                 */
+                if (autoneg == AUTONEG_DISABLE && speed == SPEED_10)
                         priv->full_duplex = (duplex == DUPLEX_FULL);
-                        if (!enc28j60_hw_init(priv)) {
-                                if (netif_msg_drv(priv))
-                                        dev_err(&ndev->dev,
-                                                "hw_reset() failed\n");
-                                ret = -EINVAL;
-                        }
-                } else {
+                else {
                         if (netif_msg_link(priv))
                                 dev_warn(&ndev->dev,
                                         "unsupported link setting\n");
@@ -1307,7 +1335,8 @@ static int enc28j60_net_open(struct net_device *dev)
                 }
                 return -EADDRNOTAVAIL;
         }
-        /* Reset the hardware here */
+        /* Reset the hardware here (and take it out of low power mode) */
+        enc28j60_lowpower(priv, false);
         enc28j60_hw_disable(priv);
         if (!enc28j60_hw_init(priv)) {
                 if (netif_msg_ifup(priv))
@@ -1337,6 +1366,7 @@ static int enc28j60_net_close(struct net_device *dev)
                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__);
 
         enc28j60_hw_disable(priv);
+        enc28j60_lowpower(priv, true);
         netif_stop_queue(dev);
 
         return 0;
@@ -1537,6 +1567,8 @@ static int __devinit enc28j60_probe(struct spi_device *spi)
         dev->watchdog_timeo = TX_TIMEOUT;
         SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops);
 
+        enc28j60_lowpower(priv, true);
+
         ret = register_netdev(dev);
         if (ret) {
                 if (netif_msg_probe(priv))
@@ -1556,7 +1588,7 @@ error_alloc:
         return ret;
 }
 
-static int enc28j60_remove(struct spi_device *spi)
+static int __devexit enc28j60_remove(struct spi_device *spi)
 {
         struct enc28j60_net *priv = dev_get_drvdata(&spi->dev);
 
@@ -1573,15 +1605,16 @@ static int enc28j60_remove(struct spi_device *spi)
 static struct spi_driver enc28j60_driver = {
         .driver = {
                    .name = DRV_NAME,
-                   .bus = &spi_bus_type,
                    .owner = THIS_MODULE,
-                   },
+         },
         .probe = enc28j60_probe,
         .remove = __devexit_p(enc28j60_remove),
 };
 
 static int __init enc28j60_init(void)
 {
+        msec20_to_jiffies = msecs_to_jiffies(20);
+
         return spi_register_driver(&enc28j60_driver);
 }