1 files changed, 38 insertions, 0 deletions

diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 18a4f5902f3b..be6d9e990374 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -378,6 +378,12 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
 
         mac->get_link_status = 0;
 
+        if (hw->phy.type == e1000_phy_82578) {
+                ret_val = e1000_link_stall_workaround_hv(hw);
+                if (ret_val)
+                        return ret_val;
+        }
+
         /*
          * Check if there was DownShift, must be checked
          * immediately after link-up
@@ -1406,6 +1412,38 @@ s32 e1000e_id_led_init(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000e_setup_led_generic - Configures SW controllable LED
+ *  @hw: pointer to the HW structure
+ *
+ *  This prepares the SW controllable LED for use and saves the current state
+ *  of the LED so it can be later restored.
+ **/
+s32 e1000e_setup_led_generic(struct e1000_hw *hw)
+{
+        u32 ledctl;
+
+        if (hw->mac.ops.setup_led != e1000e_setup_led_generic) {
+                return -E1000_ERR_CONFIG;
+        }
+
+        if (hw->phy.media_type == e1000_media_type_fiber) {
+                ledctl = er32(LEDCTL);
+                hw->mac.ledctl_default = ledctl;
+                /* Turn off LED0 */
+                ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
+                            E1000_LEDCTL_LED0_BLINK |
+                            E1000_LEDCTL_LED0_MODE_MASK);
+                ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
+                           E1000_LEDCTL_LED0_MODE_SHIFT);
+                ew32(LEDCTL, ledctl);
+        } else if (hw->phy.media_type == e1000_media_type_copper) {
+                ew32(LEDCTL, hw->mac.ledctl_mode1);
+        }
+
+        return 0;
+}
+
+/**
  *  e1000e_cleanup_led_generic - Set LED config to default operation
  *  @hw: pointer to the HW structure
  *