1 files changed, 41 insertions, 42 deletions

diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index 38dbaf28d439..c2522cdfab37 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -223,13 +223,13 @@ static int fpga_slow_intr(adapter_t *adapter)
                 t1_sge_intr_error_handler(adapter->sge);
 
         if (cause & FPGA_PCIX_INTERRUPT_GMAC)
-                fpga_phy_intr_handler(adapter);
+                fpga_phy_intr_handler(adapter);
 
         if (cause & FPGA_PCIX_INTERRUPT_TP) {
-                /*
+                /*
                  * FPGA doesn't support MC4 interrupts and it requires
                  * this odd layer of indirection for MC5.
-                 */
+                 */
                 u32 tp_cause = readl(adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE);
 
                 /* Clear TP interrupt */
@@ -262,8 +262,7 @@ static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg)
                         udelay(10);
         } while (busy && --attempts);
         if (busy)
-                CH_ALERT("%s: MDIO operation timed out\n",
-                         adapter->name);
+                CH_ALERT("%s: MDIO operation timed out\n", adapter->name);
         return busy;
 }
 
@@ -605,23 +604,23 @@ int t1_elmer0_ext_intr_handler(adapter_t *adapter)
 
         switch (board_info(adapter)->board) {
 #ifdef CONFIG_CHELSIO_T1_1G
-        case CHBT_BOARD_CHT204:
-        case CHBT_BOARD_CHT204E:
-        case CHBT_BOARD_CHN204:
-        case CHBT_BOARD_CHT204V: {
-                int i, port_bit;
+        case CHBT_BOARD_CHT204:
+        case CHBT_BOARD_CHT204E:
+        case CHBT_BOARD_CHN204:
+        case CHBT_BOARD_CHT204V: {
+                int i, port_bit;
                 for_each_port(adapter, i) {
                         port_bit = i + 1;
                         if (!(cause & (1 << port_bit)))
                                 continue;
 
-                        phy = adapter->port[i].phy;
+                        phy = adapter->port[i].phy;
                         phy_cause = phy->ops->interrupt_handler(phy);
                         if (phy_cause & cphy_cause_link_change)
                                 t1_link_changed(adapter, i);
                 }
-                break;
-        }
+                break;
+        }
         case CHBT_BOARD_CHT101:
                 if (cause & ELMER0_GP_BIT1) { /* Marvell 88E1111 interrupt */
                         phy = adapter->port[0].phy;
@@ -632,13 +631,13 @@ int t1_elmer0_ext_intr_handler(adapter_t *adapter)
                 break;
         case CHBT_BOARD_7500: {
                 int p;
-                /*
+                /*
                  * Elmer0's interrupt cause isn't useful here because there is
                  * only one bit that can be set for all 4 ports.  This means
                  * we are forced to check every PHY's interrupt status
                  * register to see who initiated the interrupt.
-                 */
-                for_each_port(adapter, p) {
+                 */
+                for_each_port(adapter, p) {
                         phy = adapter->port[p].phy;
                         phy_cause = phy->ops->interrupt_handler(phy);
                         if (phy_cause & cphy_cause_link_change)
@@ -659,7 +658,7 @@ int t1_elmer0_ext_intr_handler(adapter_t *adapter)
                 break;
         case CHBT_BOARD_8000:
         case CHBT_BOARD_CHT110:
-                CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
+                CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
                        cause);
                 if (cause & ELMER0_GP_BIT1) {        /* PMC3393 INTB */
                         struct cmac *mac = adapter->port[0].mac;
@@ -671,9 +670,9 @@ int t1_elmer0_ext_intr_handler(adapter_t *adapter)
 
                         t1_tpi_read(adapter,
                                         A_ELMER0_GPI_STAT, &mod_detect);
-                        CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
+                        CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
                                mod_detect ? "removed" : "inserted");
-                }
+                }
                 break;
 #ifdef CONFIG_CHELSIO_T1_COUGAR
         case CHBT_BOARD_COUGAR:
@@ -757,7 +756,7 @@ void t1_interrupts_disable(adapter_t* adapter)
 
         /* Disable PCIX & external chip interrupts. */
         if (t1_is_asic(adapter))
-                writel(0, adapter->regs + A_PL_ENABLE);
+                writel(0, adapter->regs + A_PL_ENABLE);
 
         /* PCI-X interrupts */
         pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0);
@@ -832,11 +831,11 @@ int t1_slow_intr_handler(adapter_t *adapter)
 /* Power sequencing is a work-around for Intel's XPAKs. */
 static void power_sequence_xpak(adapter_t* adapter)
 {
-        u32 mod_detect;
-        u32 gpo;
+        u32 mod_detect;
+        u32 gpo;
 
-        /* Check for XPAK */
-        t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
+        /* Check for XPAK */
+        t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
         if (!(ELMER0_GP_BIT5 & mod_detect)) {
                 /* XPAK is present */
                 t1_tpi_read(adapter, A_ELMER0_GPO, &gpo);
@@ -879,31 +878,31 @@ static int board_init(adapter_t *adapter, const struct board_info *bi)
         case CHBT_BOARD_N210:
         case CHBT_BOARD_CHT210:
         case CHBT_BOARD_COUGAR:
-                t1_tpi_par(adapter, 0xf);
-                t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
+                t1_tpi_par(adapter, 0xf);
+                t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
                 break;
         case CHBT_BOARD_CHT110:
-                t1_tpi_par(adapter, 0xf);
-                t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800);
+                t1_tpi_par(adapter, 0xf);
+                t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800);
 
-                /* TBD XXX Might not need.  This fixes a problem
-                 *         described in the Intel SR XPAK errata.
-                 */
-                power_sequence_xpak(adapter);
+                /* TBD XXX Might not need.  This fixes a problem
+                 *         described in the Intel SR XPAK errata.
+                 */
+                power_sequence_xpak(adapter);
                 break;
 #ifdef CONFIG_CHELSIO_T1_1G
-    case CHBT_BOARD_CHT204E:
-                        /* add config space write here */
+        case CHBT_BOARD_CHT204E:
+                /* add config space write here */
         case CHBT_BOARD_CHT204:
         case CHBT_BOARD_CHT204V:
         case CHBT_BOARD_CHN204:
-                t1_tpi_par(adapter, 0xf);
-                t1_tpi_write(adapter, A_ELMER0_GPO, 0x804);
-                break;
+                t1_tpi_par(adapter, 0xf);
+                t1_tpi_write(adapter, A_ELMER0_GPO, 0x804);
+                break;
         case CHBT_BOARD_CHT101:
         case CHBT_BOARD_7500:
-                t1_tpi_par(adapter, 0xf);
-                t1_tpi_write(adapter, A_ELMER0_GPO, 0x1804);
+                t1_tpi_par(adapter, 0xf);
+                t1_tpi_write(adapter, A_ELMER0_GPO, 0x1804);
                 break;
 #endif
         }
@@ -943,7 +942,7 @@ int t1_init_hw_modules(adapter_t *adapter)
                 goto out_err;
 
         err = 0;
- out_err:
+out_err:
         return err;
 }
 
@@ -985,7 +984,7 @@ void t1_free_sw_modules(adapter_t *adapter)
         if (adapter->espi)
                 t1_espi_destroy(adapter->espi);
 #ifdef CONFIG_CHELSIO_T1_COUGAR
-        if (adapter->cspi)
+        if (adapter->cspi)
                 t1_cspi_destroy(adapter->cspi);
 #endif
 }
@@ -1012,7 +1011,7 @@ static void __devinit init_link_config(struct link_config *lc,
                 CH_ERR("%s: CSPI initialization failed\n",
                        adapter->name);
                 goto error;
-        }
+        }
 #endif
 
 /*