1 files changed, 30 insertions, 0 deletions

diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig
new file mode 100644
index 000000000000..92bd6bdde5e3
--- /dev/null
+++ b/drivers/net/can/softing/Kconfig
@@ -0,0 +1,30 @@
+config CAN_SOFTING
+        tristate "Softing Gmbh CAN generic support"
+        depends on CAN_DEV
+        ---help---
+          Support for CAN cards from Softing Gmbh & some cards
+          from Vector Gmbh.
+          Softing Gmbh CAN cards come with 1 or 2 physical busses.
+          Those cards typically use Dual Port RAM to communicate
+          with the host CPU. The interface is then identical for PCI
+          and PCMCIA cards. This driver operates on a platform device,
+          which has been created by softing_cs or softing_pci driver.
+          Warning:
+          The API of the card does not allow fine control per bus, but
+          controls the 2 busses on the card together.
+          As such, some actions (start/stop/busoff recovery) on 1 bus
+          must bring down the other bus too temporarily.
+
+config CAN_SOFTING_CS
+        tristate "Softing Gmbh CAN pcmcia cards"
+        depends on PCMCIA
+        select CAN_SOFTING
+        ---help---
+          Support for PCMCIA cards from Softing Gmbh & some cards
+          from Vector Gmbh.
+          You need firmware for these, which you can get at
+          http://developer.berlios.de/projects/socketcan/
+          This version of the driver is written against
+          firmware version 4.6 (softing-fw-4.6-binaries.tar.gz)
+          In order to use the card as CAN device, you need the Softing generic
+          support too.