1 files changed, 946 insertions, 0 deletions

diff --git a/drivers/net/atlx/atl1_hw.h b/drivers/net/atlx/atl1_hw.h
new file mode 100644
index 000000000000..939aa0f53f6e
--- /dev/null
+++ b/drivers/net/atlx/atl1_hw.h
@@ -0,0 +1,946 @@
+/*
+ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+ * Copyright(c) 2006 Chris Snook <csnook@redhat.com>
+ * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * There are a lot of defines in here that are unused and/or have cryptic
+ * names.  Please leave them alone, as they're the closest thing we have
+ * to a spec from Attansic at present. *ahem* -- CHS
+ */
+
+#ifndef _ATL1_HW_H_
+#define _ATL1_HW_H_
+
+#include <linux/types.h>
+#include <linux/mii.h>
+
+struct atl1_adapter;
+struct atl1_hw;
+
+/* function prototypes needed by multiple files */
+s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw);
+s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data);
+s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex);
+s32 atl1_read_mac_addr(struct atl1_hw *hw);
+s32 atl1_init_hw(struct atl1_hw *hw);
+s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex);
+s32 atl1_set_speed_and_duplex(struct atl1_hw *hw, u16 speed, u16 duplex);
+u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr);
+void atl1_hash_set(struct atl1_hw *hw, u32 hash_value);
+s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data);
+void atl1_set_mac_addr(struct atl1_hw *hw);
+s32 atl1_phy_enter_power_saving(struct atl1_hw *hw);
+s32 atl1_reset_hw(struct atl1_hw *hw);
+void atl1_check_options(struct atl1_adapter *adapter);
+
+/* register definitions */
+#define REG_PCIE_CAP_LIST                       0x58
+
+#define REG_VPD_CAP                             0x6C
+#define VPD_CAP_ID_MASK                         0xff
+#define VPD_CAP_ID_SHIFT                        0
+#define VPD_CAP_NEXT_PTR_MASK                   0xFF
+#define VPD_CAP_NEXT_PTR_SHIFT                  8
+#define VPD_CAP_VPD_ADDR_MASK                   0x7FFF
+#define VPD_CAP_VPD_ADDR_SHIFT                  16
+#define VPD_CAP_VPD_FLAG                        0x80000000
+
+#define REG_VPD_DATA                            0x70
+
+#define REG_SPI_FLASH_CTRL                      0x200
+#define SPI_FLASH_CTRL_STS_NON_RDY              0x1
+#define SPI_FLASH_CTRL_STS_WEN                  0x2
+#define SPI_FLASH_CTRL_STS_WPEN                 0x80
+#define SPI_FLASH_CTRL_DEV_STS_MASK             0xFF
+#define SPI_FLASH_CTRL_DEV_STS_SHIFT            0
+#define SPI_FLASH_CTRL_INS_MASK                 0x7
+#define SPI_FLASH_CTRL_INS_SHIFT                8
+#define SPI_FLASH_CTRL_START                    0x800
+#define SPI_FLASH_CTRL_EN_VPD                   0x2000
+#define SPI_FLASH_CTRL_LDSTART                  0x8000
+#define SPI_FLASH_CTRL_CS_HI_MASK               0x3
+#define SPI_FLASH_CTRL_CS_HI_SHIFT              16
+#define SPI_FLASH_CTRL_CS_HOLD_MASK             0x3
+#define SPI_FLASH_CTRL_CS_HOLD_SHIFT            18
+#define SPI_FLASH_CTRL_CLK_LO_MASK              0x3
+#define SPI_FLASH_CTRL_CLK_LO_SHIFT             20
+#define SPI_FLASH_CTRL_CLK_HI_MASK              0x3
+#define SPI_FLASH_CTRL_CLK_HI_SHIFT             22
+#define SPI_FLASH_CTRL_CS_SETUP_MASK            0x3
+#define SPI_FLASH_CTRL_CS_SETUP_SHIFT           24
+#define SPI_FLASH_CTRL_EROM_PGSZ_MASK           0x3
+#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT          26
+#define SPI_FLASH_CTRL_WAIT_READY               0x10000000
+
+#define REG_SPI_ADDR                            0x204
+
+#define REG_SPI_DATA                            0x208
+
+#define REG_SPI_FLASH_CONFIG                    0x20C
+#define SPI_FLASH_CONFIG_LD_ADDR_MASK           0xFFFFFF
+#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT          0
+#define SPI_FLASH_CONFIG_VPD_ADDR_MASK          0x3
+#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT         24
+#define SPI_FLASH_CONFIG_LD_EXIST               0x4000000
+
+#define REG_SPI_FLASH_OP_PROGRAM                0x210
+#define REG_SPI_FLASH_OP_SC_ERASE               0x211
+#define REG_SPI_FLASH_OP_CHIP_ERASE             0x212
+#define REG_SPI_FLASH_OP_RDID                   0x213
+#define REG_SPI_FLASH_OP_WREN                   0x214
+#define REG_SPI_FLASH_OP_RDSR                   0x215
+#define REG_SPI_FLASH_OP_WRSR                   0x216
+#define REG_SPI_FLASH_OP_READ                   0x217
+
+#define REG_TWSI_CTRL                           0x218
+#define TWSI_CTRL_LD_OFFSET_MASK                0xFF
+#define TWSI_CTRL_LD_OFFSET_SHIFT               0
+#define TWSI_CTRL_LD_SLV_ADDR_MASK              0x7
+#define TWSI_CTRL_LD_SLV_ADDR_SHIFT             8
+#define TWSI_CTRL_SW_LDSTART                    0x800
+#define TWSI_CTRL_HW_LDSTART                    0x1000
+#define TWSI_CTRL_SMB_SLV_ADDR_MASK             0x7F
+#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT            15
+#define TWSI_CTRL_LD_EXIST                      0x400000
+#define TWSI_CTRL_READ_FREQ_SEL_MASK            0x3
+#define TWSI_CTRL_READ_FREQ_SEL_SHIFT           23
+#define TWSI_CTRL_FREQ_SEL_100K                 0
+#define TWSI_CTRL_FREQ_SEL_200K                 1
+#define TWSI_CTRL_FREQ_SEL_300K                 2
+#define TWSI_CTRL_FREQ_SEL_400K                 3
+#define TWSI_CTRL_SMB_SLV_ADDR
+#define TWSI_CTRL_WRITE_FREQ_SEL_MASK           0x3
+#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT          24
+
+#define REG_PCIE_DEV_MISC_CTRL                  0x21C
+#define PCIE_DEV_MISC_CTRL_EXT_PIPE             0x2
+#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS         0x1
+#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST         0x4
+#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN        0x8
+#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN       0x10
+
+/* Selene Master Control Register */
+#define REG_MASTER_CTRL                         0x1400
+#define MASTER_CTRL_SOFT_RST                    0x1
+#define MASTER_CTRL_MTIMER_EN                   0x2
+#define MASTER_CTRL_ITIMER_EN                   0x4
+#define MASTER_CTRL_MANUAL_INT                  0x8
+#define MASTER_CTRL_REV_NUM_SHIFT               16
+#define MASTER_CTRL_REV_NUM_MASK                0xff
+#define MASTER_CTRL_DEV_ID_SHIFT                24
+#define MASTER_CTRL_DEV_ID_MASK                 0xff
+
+/* Timer Initial Value Register */
+#define REG_MANUAL_TIMER_INIT                   0x1404
+
+/* IRQ ModeratorTimer Initial Value Register */
+#define REG_IRQ_MODU_TIMER_INIT                 0x1408
+
+#define REG_GPHY_ENABLE                         0x140C
+
+/* IRQ Anti-Lost Timer Initial Value Register */
+#define REG_CMBDISDMA_TIMER                     0x140E
+
+/* Block IDLE Status Register */
+#define REG_IDLE_STATUS                         0x1410
+#define IDLE_STATUS_RXMAC                       1
+#define IDLE_STATUS_TXMAC                       2
+#define IDLE_STATUS_RXQ                         4
+#define IDLE_STATUS_TXQ                         8
+#define IDLE_STATUS_DMAR                        0x10
+#define IDLE_STATUS_DMAW                        0x20
+#define IDLE_STATUS_SMB                         0x40
+#define IDLE_STATUS_CMB                         0x80
+
+/* MDIO Control Register */
+#define REG_MDIO_CTRL                           0x1414
+#define MDIO_DATA_MASK                          0xffff
+#define MDIO_DATA_SHIFT                         0
+#define MDIO_REG_ADDR_MASK                      0x1f
+#define MDIO_REG_ADDR_SHIFT                     16
+#define MDIO_RW                                 0x200000
+#define MDIO_SUP_PREAMBLE                       0x400000
+#define MDIO_START                              0x800000
+#define MDIO_CLK_SEL_SHIFT                      24
+#define MDIO_CLK_25_4                           0
+#define MDIO_CLK_25_6                           2
+#define MDIO_CLK_25_8                           3
+#define MDIO_CLK_25_10                          4
+#define MDIO_CLK_25_14                          5
+#define MDIO_CLK_25_20                          6
+#define MDIO_CLK_25_28                          7
+#define MDIO_BUSY                               0x8000000
+#define MDIO_WAIT_TIMES                         30
+
+/* MII PHY Status Register */
+#define REG_PHY_STATUS                          0x1418
+
+/* BIST Control and Status Register0 (for the Packet Memory) */
+#define REG_BIST0_CTRL                          0x141c
+#define BIST0_NOW                               0x1
+#define BIST0_SRAM_FAIL                         0x2
+#define BIST0_FUSE_FLAG                         0x4
+#define REG_BIST1_CTRL                          0x1420
+#define BIST1_NOW                               0x1
+#define BIST1_SRAM_FAIL                         0x2
+#define BIST1_FUSE_FLAG                         0x4
+
+/* MAC Control Register */
+#define REG_MAC_CTRL                            0x1480
+#define MAC_CTRL_TX_EN                          1
+#define MAC_CTRL_RX_EN                          2
+#define MAC_CTRL_TX_FLOW                        4
+#define MAC_CTRL_RX_FLOW                        8
+#define MAC_CTRL_LOOPBACK                       0x10
+#define MAC_CTRL_DUPLX                          0x20
+#define MAC_CTRL_ADD_CRC                        0x40
+#define MAC_CTRL_PAD                            0x80
+#define MAC_CTRL_LENCHK                         0x100
+#define MAC_CTRL_HUGE_EN                        0x200
+#define MAC_CTRL_PRMLEN_SHIFT                   10
+#define MAC_CTRL_PRMLEN_MASK                    0xf
+#define MAC_CTRL_RMV_VLAN                       0x4000
+#define MAC_CTRL_PROMIS_EN                      0x8000
+#define MAC_CTRL_TX_PAUSE                       0x10000
+#define MAC_CTRL_SCNT                           0x20000
+#define MAC_CTRL_SRST_TX                        0x40000
+#define MAC_CTRL_TX_SIMURST                     0x80000
+#define MAC_CTRL_SPEED_SHIFT                    20
+#define MAC_CTRL_SPEED_MASK                     0x300000
+#define MAC_CTRL_SPEED_1000                     2
+#define MAC_CTRL_SPEED_10_100                   1
+#define MAC_CTRL_DBG_TX_BKPRESURE               0x400000
+#define MAC_CTRL_TX_HUGE                        0x800000
+#define MAC_CTRL_RX_CHKSUM_EN                   0x1000000
+#define MAC_CTRL_MC_ALL_EN                      0x2000000
+#define MAC_CTRL_BC_EN                          0x4000000
+#define MAC_CTRL_DBG                            0x8000000
+
+/* MAC IPG/IFG Control Register */
+#define REG_MAC_IPG_IFG                         0x1484
+#define MAC_IPG_IFG_IPGT_SHIFT                  0
+#define MAC_IPG_IFG_IPGT_MASK                   0x7f
+#define MAC_IPG_IFG_MIFG_SHIFT                  8
+#define MAC_IPG_IFG_MIFG_MASK                   0xff
+#define MAC_IPG_IFG_IPGR1_SHIFT                 16
+#define MAC_IPG_IFG_IPGR1_MASK                  0x7f
+#define MAC_IPG_IFG_IPGR2_SHIFT                 24
+#define MAC_IPG_IFG_IPGR2_MASK                  0x7f
+
+/* MAC STATION ADDRESS */
+#define REG_MAC_STA_ADDR                        0x1488
+
+/* Hash table for multicast address */
+#define REG_RX_HASH_TABLE                       0x1490
+
+/* MAC Half-Duplex Control Register */
+#define REG_MAC_HALF_DUPLX_CTRL                 0x1498
+#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT          0
+#define MAC_HALF_DUPLX_CTRL_LCOL_MASK           0x3ff
+#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT         12
+#define MAC_HALF_DUPLX_CTRL_RETRY_MASK          0xf
+#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN          0x10000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_C           0x20000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_P           0x40000
+#define MAC_HALF_DUPLX_CTRL_ABEBE               0x80000
+#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT         20
+#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK          0xf
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT        24
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK         0xf
+
+/* Maximum Frame Length Control Register */
+#define REG_MTU                                 0x149c
+
+/* Wake-On-Lan control register */
+#define REG_WOL_CTRL                            0x14a0
+#define WOL_PATTERN_EN                          0x00000001
+#define WOL_PATTERN_PME_EN                      0x00000002
+#define WOL_MAGIC_EN                            0x00000004
+#define WOL_MAGIC_PME_EN                        0x00000008
+#define WOL_LINK_CHG_EN                         0x00000010
+#define WOL_LINK_CHG_PME_EN                     0x00000020
+#define WOL_PATTERN_ST                          0x00000100
+#define WOL_MAGIC_ST                            0x00000200
+#define WOL_LINKCHG_ST                          0x00000400
+#define WOL_CLK_SWITCH_EN                       0x00008000
+#define WOL_PT0_EN                              0x00010000
+#define WOL_PT1_EN                              0x00020000
+#define WOL_PT2_EN                              0x00040000
+#define WOL_PT3_EN                              0x00080000
+#define WOL_PT4_EN                              0x00100000
+#define WOL_PT5_EN                              0x00200000
+#define WOL_PT6_EN                              0x00400000
+
+/* WOL Length ( 2 DWORD ) */
+#define REG_WOL_PATTERN_LEN                     0x14a4
+#define WOL_PT_LEN_MASK                         0x7f
+#define WOL_PT0_LEN_SHIFT                       0
+#define WOL_PT1_LEN_SHIFT                       8
+#define WOL_PT2_LEN_SHIFT                       16
+#define WOL_PT3_LEN_SHIFT                       24
+#define WOL_PT4_LEN_SHIFT                       0
+#define WOL_PT5_LEN_SHIFT                       8
+#define WOL_PT6_LEN_SHIFT                       16
+
+/* Internal SRAM Partition Register */
+#define REG_SRAM_RFD_ADDR                       0x1500
+#define REG_SRAM_RFD_LEN                        (REG_SRAM_RFD_ADDR+ 4)
+#define REG_SRAM_RRD_ADDR                       (REG_SRAM_RFD_ADDR+ 8)
+#define REG_SRAM_RRD_LEN                        (REG_SRAM_RFD_ADDR+12)
+#define REG_SRAM_TPD_ADDR                       (REG_SRAM_RFD_ADDR+16)
+#define REG_SRAM_TPD_LEN                        (REG_SRAM_RFD_ADDR+20)
+#define REG_SRAM_TRD_ADDR                       (REG_SRAM_RFD_ADDR+24)
+#define REG_SRAM_TRD_LEN                        (REG_SRAM_RFD_ADDR+28)
+#define REG_SRAM_RXF_ADDR                       (REG_SRAM_RFD_ADDR+32)
+#define REG_SRAM_RXF_LEN                        (REG_SRAM_RFD_ADDR+36)
+#define REG_SRAM_TXF_ADDR                       (REG_SRAM_RFD_ADDR+40)
+#define REG_SRAM_TXF_LEN                        (REG_SRAM_RFD_ADDR+44)
+#define REG_SRAM_TCPH_PATH_ADDR                 (REG_SRAM_RFD_ADDR+48)
+#define SRAM_TCPH_ADDR_MASK                     0x0fff
+#define SRAM_TCPH_ADDR_SHIFT                    0
+#define SRAM_PATH_ADDR_MASK                     0x0fff
+#define SRAM_PATH_ADDR_SHIFT                    16
+
+/* Load Ptr Register */
+#define REG_LOAD_PTR                            (REG_SRAM_RFD_ADDR+52)
+
+/* Descriptor Control register */
+#define REG_DESC_BASE_ADDR_HI                   0x1540
+#define REG_DESC_RFD_ADDR_LO                    (REG_DESC_BASE_ADDR_HI+4)
+#define REG_DESC_RRD_ADDR_LO                    (REG_DESC_BASE_ADDR_HI+8)
+#define REG_DESC_TPD_ADDR_LO                    (REG_DESC_BASE_ADDR_HI+12)
+#define REG_DESC_CMB_ADDR_LO                    (REG_DESC_BASE_ADDR_HI+16)
+#define REG_DESC_SMB_ADDR_LO                    (REG_DESC_BASE_ADDR_HI+20)
+#define REG_DESC_RFD_RRD_RING_SIZE              (REG_DESC_BASE_ADDR_HI+24)
+#define DESC_RFD_RING_SIZE_MASK                 0x7ff
+#define DESC_RFD_RING_SIZE_SHIFT                0
+#define DESC_RRD_RING_SIZE_MASK                 0x7ff
+#define DESC_RRD_RING_SIZE_SHIFT                16
+#define REG_DESC_TPD_RING_SIZE                  (REG_DESC_BASE_ADDR_HI+28)
+#define DESC_TPD_RING_SIZE_MASK                 0x3ff
+#define DESC_TPD_RING_SIZE_SHIFT                0
+
+/* TXQ Control Register */
+#define REG_TXQ_CTRL                            0x1580
+#define TXQ_CTRL_TPD_BURST_NUM_SHIFT            0
+#define TXQ_CTRL_TPD_BURST_NUM_MASK             0x1f
+#define TXQ_CTRL_EN                             0x20
+#define TXQ_CTRL_ENH_MODE                       0x40
+#define TXQ_CTRL_TPD_FETCH_TH_SHIFT             8
+#define TXQ_CTRL_TPD_FETCH_TH_MASK              0x3f
+#define TXQ_CTRL_TXF_BURST_NUM_SHIFT            16
+#define TXQ_CTRL_TXF_BURST_NUM_MASK             0xffff
+
+/* Jumbo packet Threshold for task offload */
+#define REG_TX_JUMBO_TASK_TH_TPD_IPG            0x1584
+#define TX_JUMBO_TASK_TH_MASK                   0x7ff
+#define TX_JUMBO_TASK_TH_SHIFT                  0
+#define TX_TPD_MIN_IPG_MASK                     0x1f
+#define TX_TPD_MIN_IPG_SHIFT                    16
+
+/* RXQ Control Register */
+#define REG_RXQ_CTRL                            0x15a0
+#define RXQ_CTRL_RFD_BURST_NUM_SHIFT            0
+#define RXQ_CTRL_RFD_BURST_NUM_MASK             0xff
+#define RXQ_CTRL_RRD_BURST_THRESH_SHIFT         8
+#define RXQ_CTRL_RRD_BURST_THRESH_MASK          0xff
+#define RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT         16
+#define RXQ_CTRL_RFD_PREF_MIN_IPG_MASK          0x1f
+#define RXQ_CTRL_CUT_THRU_EN                    0x40000000
+#define RXQ_CTRL_EN                             0x80000000
+
+/* Rx jumbo packet threshold and rrd  retirement timer */
+#define REG_RXQ_JMBOSZ_RRDTIM                   (REG_RXQ_CTRL+ 4)
+#define RXQ_JMBOSZ_TH_MASK                      0x7ff
+#define RXQ_JMBOSZ_TH_SHIFT                     0
+#define RXQ_JMBO_LKAH_MASK                      0xf
+#define RXQ_JMBO_LKAH_SHIFT                     11
+#define RXQ_RRD_TIMER_MASK                      0xffff
+#define RXQ_RRD_TIMER_SHIFT                     16
+
+/* RFD flow control register */
+#define REG_RXQ_RXF_PAUSE_THRESH                (REG_RXQ_CTRL+ 8)
+#define RXQ_RXF_PAUSE_TH_HI_SHIFT               16
+#define RXQ_RXF_PAUSE_TH_HI_MASK                0xfff
+#define RXQ_RXF_PAUSE_TH_LO_SHIFT               0
+#define RXQ_RXF_PAUSE_TH_LO_MASK                0xfff
+
+/* RRD flow control register */
+#define REG_RXQ_RRD_PAUSE_THRESH                (REG_RXQ_CTRL+12)
+#define RXQ_RRD_PAUSE_TH_HI_SHIFT               0
+#define RXQ_RRD_PAUSE_TH_HI_MASK                0xfff
+#define RXQ_RRD_PAUSE_TH_LO_SHIFT               16
+#define RXQ_RRD_PAUSE_TH_LO_MASK                0xfff
+
+/* DMA Engine Control Register */
+#define REG_DMA_CTRL                            0x15c0
+#define DMA_CTRL_DMAR_IN_ORDER                  0x1
+#define DMA_CTRL_DMAR_ENH_ORDER                 0x2
+#define DMA_CTRL_DMAR_OUT_ORDER                 0x4
+#define DMA_CTRL_RCB_VALUE                      0x8
+#define DMA_CTRL_DMAR_BURST_LEN_SHIFT           4
+#define DMA_CTRL_DMAR_BURST_LEN_MASK            7
+#define DMA_CTRL_DMAW_BURST_LEN_SHIFT           7
+#define DMA_CTRL_DMAW_BURST_LEN_MASK            7
+#define DMA_CTRL_DMAR_EN                                0x400
+#define DMA_CTRL_DMAW_EN                                0x800
+
+/* CMB/SMB Control Register */
+#define REG_CSMB_CTRL                           0x15d0
+#define CSMB_CTRL_CMB_NOW                       1
+#define CSMB_CTRL_SMB_NOW                       2
+#define CSMB_CTRL_CMB_EN                        4
+#define CSMB_CTRL_SMB_EN                        8
+
+/* CMB DMA Write Threshold Register */
+#define REG_CMB_WRITE_TH                        (REG_CSMB_CTRL+ 4)
+#define CMB_RRD_TH_SHIFT                        0
+#define CMB_RRD_TH_MASK                         0x7ff
+#define CMB_TPD_TH_SHIFT                        16
+#define CMB_TPD_TH_MASK                         0x7ff
+
+/* RX/TX count-down timer to trigger CMB-write. 2us resolution. */
+#define REG_CMB_WRITE_TIMER                     (REG_CSMB_CTRL+ 8)
+#define CMB_RX_TM_SHIFT                         0
+#define CMB_RX_TM_MASK                          0xffff
+#define CMB_TX_TM_SHIFT                         16
+#define CMB_TX_TM_MASK                          0xffff
+
+/* Number of packet received since last CMB write */
+#define REG_CMB_RX_PKT_CNT                      (REG_CSMB_CTRL+12)
+
+/* Number of packet transmitted since last CMB write */
+#define REG_CMB_TX_PKT_CNT                      (REG_CSMB_CTRL+16)
+
+/* SMB auto DMA timer register */
+#define REG_SMB_TIMER                           (REG_CSMB_CTRL+20)
+
+/* Mailbox Register */
+#define REG_MAILBOX                             0x15f0
+#define MB_RFD_PROD_INDX_SHIFT                  0
+#define MB_RFD_PROD_INDX_MASK                   0x7ff
+#define MB_RRD_CONS_INDX_SHIFT                  11
+#define MB_RRD_CONS_INDX_MASK                   0x7ff
+#define MB_TPD_PROD_INDX_SHIFT                  22
+#define MB_TPD_PROD_INDX_MASK                   0x3ff
+
+/* Interrupt Status Register */
+#define REG_ISR                                 0x1600
+#define ISR_SMB                                 1
+#define ISR_TIMER                               2
+#define ISR_MANUAL                              4
+#define ISR_RXF_OV                              8
+#define ISR_RFD_UNRUN                           0x10
+#define ISR_RRD_OV                              0x20
+#define ISR_TXF_UNRUN                           0x40
+#define ISR_LINK                                0x80
+#define ISR_HOST_RFD_UNRUN                      0x100
+#define ISR_HOST_RRD_OV                         0x200
+#define ISR_DMAR_TO_RST                         0x400
+#define ISR_DMAW_TO_RST                         0x800
+#define ISR_GPHY                                0x1000
+#define ISR_RX_PKT                              0x10000
+#define ISR_TX_PKT                              0x20000
+#define ISR_TX_DMA                              0x40000
+#define ISR_RX_DMA                              0x80000
+#define ISR_CMB_RX                              0x100000
+#define ISR_CMB_TX                              0x200000
+#define ISR_MAC_RX                              0x400000
+#define ISR_MAC_TX                              0x800000
+#define ISR_UR_DETECTED                         0x1000000
+#define ISR_FERR_DETECTED                       0x2000000
+#define ISR_NFERR_DETECTED                      0x4000000
+#define ISR_CERR_DETECTED                       0x8000000
+#define ISR_PHY_LINKDOWN                        0x10000000
+#define ISR_DIS_SMB                             0x20000000
+#define ISR_DIS_DMA                             0x40000000
+#define ISR_DIS_INT                             0x80000000
+
+/* Interrupt Mask Register */
+#define REG_IMR                                 0x1604
+
+/* Normal Interrupt mask  */
+#define IMR_NORMAL_MASK (\
+        ISR_SMB         |\
+        ISR_GPHY        |\
+        ISR_PHY_LINKDOWN|\
+        ISR_DMAR_TO_RST |\
+        ISR_DMAW_TO_RST |\
+        ISR_CMB_TX      |\
+        ISR_CMB_RX      )
+
+/* Debug Interrupt Mask  (enable all interrupt) */
+#define IMR_DEBUG_MASK  (\
+        ISR_SMB         |\
+        ISR_TIMER       |\
+        ISR_MANUAL      |\
+        ISR_RXF_OV      |\
+        ISR_RFD_UNRUN   |\
+        ISR_RRD_OV      |\
+        ISR_TXF_UNRUN   |\
+        ISR_LINK        |\
+        ISR_CMB_TX      |\
+        ISR_CMB_RX      |\
+        ISR_RX_PKT      |\
+        ISR_TX_PKT      |\
+        ISR_MAC_RX      |\
+        ISR_MAC_TX      )
+
+/* Interrupt Status Register */
+#define REG_RFD_RRD_IDX                         0x1800
+#define REG_TPD_IDX                             0x1804
+
+/*  MII definition */
+/* PHY Common Register */
+#define MII_AT001_CR                                    0x09
+#define MII_AT001_SR                                    0x0A
+#define MII_AT001_ESR                                   0x0F
+#define MII_AT001_PSCR                                  0x10
+#define MII_AT001_PSSR                                  0x11
+
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB                         0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE                         0x0080  /* Collision test enable */
+#define MII_CR_FULL_DUPLEX                              0x0100  /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG                         0x0200  /* Restart auto negotiation */
+#define MII_CR_ISOLATE                                  0x0400  /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN                               0x0800  /* Power down */
+#define MII_CR_AUTO_NEG_EN                              0x1000  /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB                         0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK                                 0x4000  /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET                                    0x8000  /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_MASK                               0x2040
+#define MII_CR_SPEED_1000                               0x0040
+#define MII_CR_SPEED_100                                0x2000
+#define MII_CR_SPEED_10                                 0x0000
+
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS                            0x0001  /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT                            0x0002  /* Jabber Detected */
+#define MII_SR_LINK_STATUS                              0x0004  /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS                             0x0008  /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT                             0x0010  /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE                         0x0020  /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS                        0x0040  /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS                          0x0100  /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS                            0x0200  /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS                            0x0400  /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS                              0x0800  /* 10T   Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS                              0x1000  /* 10T   Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS                             0x2000  /* 100X  Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS                             0x4000  /* 100X  Full Duplex Capable */
+#define MII_SR_100T4_CAPS                               0x8000  /* 100T4 Capable */
+
+/* Link partner ability register. */
+#define MII_LPA_SLCT                                    0x001f  /* Same as advertise selector  */
+#define MII_LPA_10HALF                                  0x0020  /* Can do 10mbps half-duplex   */
+#define MII_LPA_10FULL                                  0x0040  /* Can do 10mbps full-duplex   */
+#define MII_LPA_100HALF                                 0x0080  /* Can do 100mbps half-duplex  */
+#define MII_LPA_100FULL                                 0x0100  /* Can do 100mbps full-duplex  */
+#define MII_LPA_100BASE4                                0x0200  /* 100BASE-T4  */
+#define MII_LPA_PAUSE                                   0x0400  /* PAUSE */
+#define MII_LPA_ASYPAUSE                                0x0800  /* Asymmetrical PAUSE */
+#define MII_LPA_RFAULT                                  0x2000  /* Link partner faulted        */
+#define MII_LPA_LPACK                                   0x4000  /* Link partner acked us       */
+#define MII_LPA_NPAGE                                   0x8000  /* Next page bit               */
+
+/* Autoneg Advertisement Register */
+#define MII_AR_SELECTOR_FIELD                           0x0001  /* indicates IEEE 802.3 CSMA/CD */
+#define MII_AR_10T_HD_CAPS                              0x0020  /* 10T   Half Duplex Capable */
+#define MII_AR_10T_FD_CAPS                              0x0040  /* 10T   Full Duplex Capable */
+#define MII_AR_100TX_HD_CAPS                            0x0080  /* 100TX Half Duplex Capable */
+#define MII_AR_100TX_FD_CAPS                            0x0100  /* 100TX Full Duplex Capable */
+#define MII_AR_100T4_CAPS                               0x0200  /* 100T4 Capable */
+#define MII_AR_PAUSE                                    0x0400  /* Pause operation desired */
+#define MII_AR_ASM_DIR                                  0x0800  /* Asymmetric Pause Direction bit */
+#define MII_AR_REMOTE_FAULT                             0x2000  /* Remote Fault detected */
+#define MII_AR_NEXT_PAGE                                0x8000  /* Next Page ability supported */
+#define MII_AR_SPEED_MASK                               0x01E0
+#define MII_AR_DEFAULT_CAP_MASK                         0x0DE0
+
+/* 1000BASE-T Control Register */
+#define MII_AT001_CR_1000T_HD_CAPS                      0x0100  /* Advertise 1000T HD capability */
+#define MII_AT001_CR_1000T_FD_CAPS                      0x0200  /* Advertise 1000T FD capability  */
+#define MII_AT001_CR_1000T_REPEATER_DTE                 0x0400  /* 1=Repeater/switch device port, 0=DTE device */
+#define MII_AT001_CR_1000T_MS_VALUE                     0x0800  /* 1=Configure PHY as Master, 0=Configure PHY as Slave */
+#define MII_AT001_CR_1000T_MS_ENABLE                    0x1000  /* 1=Master/Slave manual config value, 0=Automatic Master/Slave config */
+#define MII_AT001_CR_1000T_TEST_MODE_NORMAL             0x0000  /* Normal Operation */
+#define MII_AT001_CR_1000T_TEST_MODE_1                  0x2000  /* Transmit Waveform test */
+#define MII_AT001_CR_1000T_TEST_MODE_2                  0x4000  /* Master Transmit Jitter test */
+#define MII_AT001_CR_1000T_TEST_MODE_3                  0x6000  /* Slave Transmit Jitter test */
+#define MII_AT001_CR_1000T_TEST_MODE_4                  0x8000  /* Transmitter Distortion test */
+#define MII_AT001_CR_1000T_SPEED_MASK                   0x0300
+#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK             0x0300
+
+/* 1000BASE-T Status Register */
+#define MII_AT001_SR_1000T_LP_HD_CAPS                   0x0400  /* LP is 1000T HD capable */
+#define MII_AT001_SR_1000T_LP_FD_CAPS                   0x0800  /* LP is 1000T FD capable */
+#define MII_AT001_SR_1000T_REMOTE_RX_STATUS             0x1000  /* Remote receiver OK */
+#define MII_AT001_SR_1000T_LOCAL_RX_STATUS              0x2000  /* Local receiver OK */
+#define MII_AT001_SR_1000T_MS_CONFIG_RES                0x4000  /* 1=Local TX is Master, 0=Slave */
+#define MII_AT001_SR_1000T_MS_CONFIG_FAULT              0x8000  /* Master/Slave config fault */
+#define MII_AT001_SR_1000T_REMOTE_RX_STATUS_SHIFT       12
+#define MII_AT001_SR_1000T_LOCAL_RX_STATUS_SHIFT        13
+
+/* Extended Status Register */
+#define MII_AT001_ESR_1000T_HD_CAPS                     0x1000  /* 1000T HD capable */
+#define MII_AT001_ESR_1000T_FD_CAPS                     0x2000  /* 1000T FD capable */
+#define MII_AT001_ESR_1000X_HD_CAPS                     0x4000  /* 1000X HD capable */
+#define MII_AT001_ESR_1000X_FD_CAPS                     0x8000  /* 1000X FD capable */
+
+/* AT001 PHY Specific Control Register */
+#define MII_AT001_PSCR_JABBER_DISABLE                   0x0001  /* 1=Jabber Function disabled */
+#define MII_AT001_PSCR_POLARITY_REVERSAL                0x0002  /* 1=Polarity Reversal enabled */
+#define MII_AT001_PSCR_SQE_TEST                         0x0004  /* 1=SQE Test enabled */
+#define MII_AT001_PSCR_MAC_POWERDOWN                    0x0008
+#define MII_AT001_PSCR_CLK125_DISABLE                   0x0010  /* 1=CLK125 low, 0=CLK125 toggling */
+#define MII_AT001_PSCR_MDI_MANUAL_MODE                  0x0000  /* MDI Crossover Mode bits 6:5, Manual MDI configuration */
+#define MII_AT001_PSCR_MDIX_MANUAL_MODE                 0x0020  /* Manual MDIX configuration */
+#define MII_AT001_PSCR_AUTO_X_1000T                     0x0040  /* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define MII_AT001_PSCR_AUTO_X_MODE                      0x0060  /* Auto crossover enabled all speeds. */
+#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE             0x0080  /* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T RX Threshold), 0=Normal 10BASE-T RX Threshold */
+#define MII_AT001_PSCR_MII_5BIT_ENABLE                  0x0100  /* 1=5-Bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
+#define MII_AT001_PSCR_SCRAMBLER_DISABLE                0x0200  /* 1=Scrambler disable */
+#define MII_AT001_PSCR_FORCE_LINK_GOOD                  0x0400  /* 1=Force link good */
+#define MII_AT001_PSCR_ASSERT_CRS_ON_TX                 0x0800  /* 1=Assert CRS on Transmit */
+#define MII_AT001_PSCR_POLARITY_REVERSAL_SHIFT          1
+#define MII_AT001_PSCR_AUTO_X_MODE_SHIFT                5
+#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE_SHIFT       7
+
+/* AT001 PHY Specific Status Register */
+#define MII_AT001_PSSR_SPD_DPLX_RESOLVED                0x0800  /* 1=Speed & Duplex resolved */
+#define MII_AT001_PSSR_DPLX                             0x2000  /* 1=Duplex 0=Half Duplex */
+#define MII_AT001_PSSR_SPEED                            0xC000  /* Speed, bits 14:15 */
+#define MII_AT001_PSSR_10MBS                            0x0000  /* 00=10Mbs */
+#define MII_AT001_PSSR_100MBS                           0x4000  /* 01=100Mbs */
+#define MII_AT001_PSSR_1000MBS                          0x8000  /* 10=1000Mbs */
+
+/* PCI Command Register Bit Definitions */
+#define PCI_REG_COMMAND                                 0x04    /* PCI Command Register */
+#define CMD_IO_SPACE                                    0x0001
+#define CMD_MEMORY_SPACE                                0x0002
+#define CMD_BUS_MASTER                                  0x0004
+
+/* Wake Up Filter Control */
+#define ATL1_WUFC_LNKC  0x00000001      /* Link Status Change Wakeup Enable */
+#define ATL1_WUFC_MAG   0x00000002      /* Magic Packet Wakeup Enable */
+#define ATL1_WUFC_EX    0x00000004      /* Directed Exact Wakeup Enable */
+#define ATL1_WUFC_MC    0x00000008      /* Multicast Wakeup Enable */
+#define ATL1_WUFC_BC    0x00000010      /* Broadcast Wakeup Enable */
+
+/* Error Codes */
+#define ATL1_SUCCESS                    0
+#define ATL1_ERR_EEPROM                 1
+#define ATL1_ERR_PHY                    2
+#define ATL1_ERR_CONFIG                 3
+#define ATL1_ERR_PARAM                  4
+#define ATL1_ERR_MAC_TYPE               5
+#define ATL1_ERR_PHY_TYPE               6
+#define ATL1_ERR_PHY_SPEED              7
+#define ATL1_ERR_PHY_RES                8
+
+#define SPEED_0         0xffff
+#define SPEED_10        10
+#define SPEED_100       100
+#define SPEED_1000      1000
+#define HALF_DUPLEX     1
+#define FULL_DUPLEX     2
+
+#define MEDIA_TYPE_AUTO_SENSOR  0
+#define MEDIA_TYPE_1000M_FULL   1
+#define MEDIA_TYPE_100M_FULL    2
+#define MEDIA_TYPE_100M_HALF    3
+#define MEDIA_TYPE_10M_FULL     4
+#define MEDIA_TYPE_10M_HALF     5
+
+#define ADVERTISE_10_HALF               0x0001
+#define ADVERTISE_10_FULL               0x0002
+#define ADVERTISE_100_HALF              0x0004
+#define ADVERTISE_100_FULL              0x0008
+#define ADVERTISE_1000_HALF             0x0010
+#define ADVERTISE_1000_FULL             0x0020
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F  /* Everything but 1000-Half */
+#define AUTONEG_ADVERTISE_10_100_ALL    0x000F  /* All 10/100 speeds */
+#define AUTONEG_ADVERTISE_10_ALL        0x0003  /* 10Mbps Full & Half speeds */
+
+#define MAX_JUMBO_FRAME_SIZE            0x2800
+
+#define PHY_AUTO_NEG_TIME       45      /* 4.5 Seconds */
+#define PHY_FORCE_TIME          20      /* 2.0 Seconds */
+
+/* For checksumming , the sum of all words in the EEPROM should equal 0xBABA */
+#define EEPROM_SUM              0xBABA
+
+#define ATL1_EEDUMP_LEN         48
+
+/* Statistics counters collected by the MAC */
+struct stats_msg_block {
+        /* rx */
+        u32 rx_ok;              /* The number of good packet received. */
+        u32 rx_bcast;           /* The number of good broadcast packet received. */
+        u32 rx_mcast;           /* The number of good multicast packet received. */
+        u32 rx_pause;           /* The number of Pause packet received. */
+        u32 rx_ctrl;            /* The number of Control packet received other than Pause frame. */
+        u32 rx_fcs_err;         /* The number of packets with bad FCS. */
+        u32 rx_len_err;         /* The number of packets with mismatch of length field and actual size. */
+        u32 rx_byte_cnt;        /* The number of bytes of good packet received. FCS is NOT included. */
+        u32 rx_runt;            /* The number of packets received that are less than 64 byte long and with good FCS. */
+        u32 rx_frag;            /* The number of packets received that are less than 64 byte long and with bad FCS. */
+        u32 rx_sz_64;           /* The number of good and bad packets received that are 64 byte long. */
+        u32 rx_sz_65_127;       /* The number of good and bad packets received that are between 65 and 127-byte long. */
+        u32 rx_sz_128_255;      /* The number of good and bad packets received that are between 128 and 255-byte long. */
+        u32 rx_sz_256_511;      /* The number of good and bad packets received that are between 256 and 511-byte long. */
+        u32 rx_sz_512_1023;     /* The number of good and bad packets received that are between 512 and 1023-byte long. */
+        u32 rx_sz_1024_1518;    /* The number of good and bad packets received that are between 1024 and 1518-byte long. */
+        u32 rx_sz_1519_max;     /* The number of good and bad packets received that are between 1519-byte and MTU. */
+        u32 rx_sz_ov;           /* The number of good and bad packets received that are more than MTU size šC truncated by Selene. */
+        u32 rx_rxf_ov;          /* The number of frame dropped due to occurrence of RX FIFO overflow. */
+        u32 rx_rrd_ov;          /* The number of frame dropped due to occurrence of RRD overflow. */
+        u32 rx_align_err;       /* Alignment Error */
+        u32 rx_bcast_byte_cnt;  /* The byte count of broadcast packet received, excluding FCS. */
+        u32 rx_mcast_byte_cnt;  /* The byte count of multicast packet received, excluding FCS. */
+        u32 rx_err_addr;        /* The number of packets dropped due to address filtering. */
+
+        /* tx */
+        u32 tx_ok;              /* The number of good packet transmitted. */
+        u32 tx_bcast;           /* The number of good broadcast packet transmitted. */
+        u32 tx_mcast;           /* The number of good multicast packet transmitted. */
+        u32 tx_pause;           /* The number of Pause packet transmitted. */
+        u32 tx_exc_defer;       /* The number of packets transmitted with excessive deferral. */
+        u32 tx_ctrl;            /* The number of packets transmitted is a control frame, excluding Pause frame. */
+        u32 tx_defer;           /* The number of packets transmitted that is deferred. */
+        u32 tx_byte_cnt;        /* The number of bytes of data transmitted. FCS is NOT included. */
+        u32 tx_sz_64;           /* The number of good and bad packets transmitted that are 64 byte long. */
+        u32 tx_sz_65_127;       /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */
+        u32 tx_sz_128_255;      /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */
+        u32 tx_sz_256_511;      /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */
+        u32 tx_sz_512_1023;     /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */
+        u32 tx_sz_1024_1518;    /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */
+        u32 tx_sz_1519_max;     /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */
+        u32 tx_1_col;           /* The number of packets subsequently transmitted successfully with a single prior collision. */
+        u32 tx_2_col;           /* The number of packets subsequently transmitted successfully with multiple prior collisions. */
+        u32 tx_late_col;        /* The number of packets transmitted with late collisions. */
+        u32 tx_abort_col;       /* The number of transmit packets aborted due to excessive collisions. */
+        u32 tx_underrun;        /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */
+        u32 tx_rd_eop;          /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */
+        u32 tx_len_err;         /* The number of transmit packets with length field does NOT match the actual frame size. */
+        u32 tx_trunc;           /* The number of transmit packets truncated due to size exceeding MTU. */
+        u32 tx_bcast_byte;      /* The byte count of broadcast packet transmitted, excluding FCS. */
+        u32 tx_mcast_byte;      /* The byte count of multicast packet transmitted, excluding FCS. */
+        u32 smb_updated;        /* 1: SMB Updated. This is used by software as the indication of the statistics update.
+                                 * Software should clear this bit as soon as retrieving the statistics information. */
+};
+
+/* Coalescing Message Block */
+struct coals_msg_block {
+        u32 int_stats;          /* interrupt status */
+        u16 rrd_prod_idx;       /* TRD Producer Index. */
+        u16 rfd_cons_idx;       /* RFD Consumer Index. */
+        u16 update;             /* Selene sets this bit every time it DMA the CMB to host memory.
+                                 * Software supposes to clear this bit when CMB information is processed. */
+        u16 tpd_cons_idx;       /* TPD Consumer Index. */
+};
+
+/* RRD descriptor */
+struct rx_return_desc {
+        u8 num_buf;             /* Number of RFD buffers used by the received packet */
+        u8 resved;
+        u16 buf_indx;           /* RFD Index of the first buffer */
+        union {
+                u32 valid;
+                struct {
+                        u16 rx_chksum;
+                        u16 pkt_size;
+                } xsum_sz;
+        } xsz;
+
+        u16 pkt_flg;            /* Packet flags */
+        u16 err_flg;            /* Error flags */
+        u16 resved2;
+        u16 vlan_tag;           /* VLAN TAG */
+};
+
+#define PACKET_FLAG_ETH_TYPE    0x0080
+#define PACKET_FLAG_VLAN_INS    0x0100
+#define PACKET_FLAG_ERR         0x0200
+#define PACKET_FLAG_IPV4        0x0400
+#define PACKET_FLAG_UDP         0x0800
+#define PACKET_FLAG_TCP         0x1000
+#define PACKET_FLAG_BCAST       0x2000
+#define PACKET_FLAG_MCAST       0x4000
+#define PACKET_FLAG_PAUSE       0x8000
+
+#define ERR_FLAG_CRC            0x0001
+#define ERR_FLAG_CODE           0x0002
+#define ERR_FLAG_DRIBBLE        0x0004
+#define ERR_FLAG_RUNT           0x0008
+#define ERR_FLAG_OV             0x0010
+#define ERR_FLAG_TRUNC          0x0020
+#define ERR_FLAG_IP_CHKSUM      0x0040
+#define ERR_FLAG_L4_CHKSUM      0x0080
+#define ERR_FLAG_LEN            0x0100
+#define ERR_FLAG_DES_ADDR       0x0200
+
+/* RFD descriptor */
+struct rx_free_desc {
+        __le64 buffer_addr;     /* Address of the descriptor's data buffer */
+        __le16 buf_len;         /* Size of the receive buffer in host memory, in byte */
+        u16 coalese;            /* Update consumer index to host after the reception of this frame */
+        /* __attribute__ ((packed)) is required */
+} __attribute__ ((packed));
+
+/* tsopu defines */
+#define TSO_PARAM_BUFLEN_MASK           0x3FFF
+#define TSO_PARAM_BUFLEN_SHIFT          0
+#define TSO_PARAM_DMAINT_MASK           0x0001
+#define TSO_PARAM_DMAINT_SHIFT          14
+#define TSO_PARAM_PKTNT_MASK            0x0001
+#define TSO_PARAM_PKTINT_SHIFT          15
+#define TSO_PARAM_VLANTAG_MASK          0xFFFF
+#define TSO_PARAM_VLAN_SHIFT            16
+
+/* tsopl defines */
+#define TSO_PARAM_EOP_MASK              0x0001
+#define TSO_PARAM_EOP_SHIFT             0
+#define TSO_PARAM_COALESCE_MASK         0x0001
+#define TSO_PARAM_COALESCE_SHIFT        1
+#define TSO_PARAM_INSVLAG_MASK          0x0001
+#define TSO_PARAM_INSVLAG_SHIFT         2
+#define TSO_PARAM_CUSTOMCKSUM_MASK      0x0001
+#define TSO_PARAM_CUSTOMCKSUM_SHIFT     3
+#define TSO_PARAM_SEGMENT_MASK          0x0001
+#define TSO_PARAM_SEGMENT_SHIFT         4
+#define TSO_PARAM_IPCKSUM_MASK          0x0001
+#define TSO_PARAM_IPCKSUM_SHIFT         5
+#define TSO_PARAM_TCPCKSUM_MASK         0x0001
+#define TSO_PARAM_TCPCKSUM_SHIFT        6
+#define TSO_PARAM_UDPCKSUM_MASK         0x0001
+#define TSO_PARAM_UDPCKSUM_SHIFT        7
+#define TSO_PARAM_VLANTAGGED_MASK       0x0001
+#define TSO_PARAM_VLANTAGGED_SHIFT      8
+#define TSO_PARAM_ETHTYPE_MASK          0x0001
+#define TSO_PARAM_ETHTYPE_SHIFT         9
+#define TSO_PARAM_IPHL_MASK             0x000F
+#define TSO_PARAM_IPHL_SHIFT            10
+#define TSO_PARAM_TCPHDRLEN_MASK        0x000F
+#define TSO_PARAM_TCPHDRLEN_SHIFT       14
+#define TSO_PARAM_HDRFLAG_MASK          0x0001
+#define TSO_PARAM_HDRFLAG_SHIFT         18
+#define TSO_PARAM_MSS_MASK              0x1FFF
+#define TSO_PARAM_MSS_SHIFT             19
+
+/* csumpu defines */
+#define CSUM_PARAM_BUFLEN_MASK          0x3FFF
+#define CSUM_PARAM_BUFLEN_SHIFT         0
+#define CSUM_PARAM_DMAINT_MASK          0x0001
+#define CSUM_PARAM_DMAINT_SHIFT         14
+#define CSUM_PARAM_PKTINT_MASK          0x0001
+#define CSUM_PARAM_PKTINT_SHIFT         15
+#define CSUM_PARAM_VALANTAG_MASK        0xFFFF
+#define CSUM_PARAM_VALAN_SHIFT          16
+
+/* csumpl defines*/
+#define CSUM_PARAM_EOP_MASK             0x0001
+#define CSUM_PARAM_EOP_SHIFT            0
+#define CSUM_PARAM_COALESCE_MASK        0x0001
+#define CSUM_PARAM_COALESCE_SHIFT       1
+#define CSUM_PARAM_INSVLAG_MASK         0x0001
+#define CSUM_PARAM_INSVLAG_SHIFT        2
+#define CSUM_PARAM_CUSTOMCKSUM_MASK     0x0001
+#define CSUM_PARAM_CUSTOMCKSUM_SHIFT    3
+#define CSUM_PARAM_SEGMENT_MASK         0x0001
+#define CSUM_PARAM_SEGMENT_SHIFT        4
+#define CSUM_PARAM_IPCKSUM_MASK         0x0001
+#define CSUM_PARAM_IPCKSUM_SHIFT        5
+#define CSUM_PARAM_TCPCKSUM_MASK        0x0001
+#define CSUM_PARAM_TCPCKSUM_SHIFT       6
+#define CSUM_PARAM_UDPCKSUM_MASK        0x0001
+#define CSUM_PARAM_UDPCKSUM_SHIFT       7
+#define CSUM_PARAM_VLANTAGGED_MASK      0x0001
+#define CSUM_PARAM_VLANTAGGED_SHIFT     8
+#define CSUM_PARAM_ETHTYPE_MASK         0x0001
+#define CSUM_PARAM_ETHTYPE_SHIFT        9
+#define CSUM_PARAM_IPHL_MASK            0x000F
+#define CSUM_PARAM_IPHL_SHIFT           10
+#define CSUM_PARAM_PLOADOFFSET_MASK     0x00FF
+#define CSUM_PARAM_PLOADOFFSET_SHIFT    16
+#define CSUM_PARAM_XSUMOFFSET_MASK      0x00FF
+#define CSUM_PARAM_XSUMOFFSET_SHIFT     24
+
+/* TPD descriptor */
+struct tso_param {
+        /* The order of these declarations is important -- don't change it */
+        u32 tsopu;      /* tso_param upper word */
+        u32 tsopl;      /* tso_param lower word */
+};
+
+struct csum_param {
+        /* The order of these declarations is important -- don't change it */
+        u32 csumpu;     /* csum_param upper word */
+        u32 csumpl;     /* csum_param lower word */
+};
+
+union tpd_descr {
+        u64 data;
+        struct csum_param csum;
+        struct tso_param tso;
+};
+
+struct tx_packet_desc {
+        __le64 buffer_addr;
+        union tpd_descr desc;
+};
+
+/* DMA Order Settings */
+enum atl1_dma_order {
+        atl1_dma_ord_in = 1,
+        atl1_dma_ord_enh = 2,
+        atl1_dma_ord_out = 4
+};
+
+enum atl1_dma_rcb {
+        atl1_rcb_64 = 0,
+        atl1_rcb_128 = 1
+};
+
+enum atl1_dma_req_block {
+        atl1_dma_req_128 = 0,
+        atl1_dma_req_256 = 1,
+        atl1_dma_req_512 = 2,
+        atl1_dma_req_1024 = 3,
+        atl1_dma_req_2048 = 4,
+        atl1_dma_req_4096 = 5
+};
+
+struct atl1_spi_flash_dev {
+        const char *manu_name;  /* manufacturer id */
+        /* op-code */
+        u8 cmd_wrsr;
+        u8 cmd_read;
+        u8 cmd_program;
+        u8 cmd_wren;
+        u8 cmd_wrdi;
+        u8 cmd_rdsr;
+        u8 cmd_rdid;
+        u8 cmd_sector_erase;
+        u8 cmd_chip_erase;
+};
+
+#endif  /* _ATL1_HW_H_ */