diff options
Diffstat (limited to 'drivers/net/arcnet/com20020-pci.c')
-rw-r--r-- | drivers/net/arcnet/com20020-pci.c | 189 |
1 files changed, 189 insertions, 0 deletions
diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c new file mode 100644 index 000000000000..96636ca8754e --- /dev/null +++ b/drivers/net/arcnet/com20020-pci.c | |||
@@ -0,0 +1,189 @@ | |||
1 | /* | ||
2 | * Linux ARCnet driver - COM20020 PCI support | ||
3 | * Contemporary Controls PCI20 and SOHARD SH-ARC PCI | ||
4 | * | ||
5 | * Written 1994-1999 by Avery Pennarun, | ||
6 | * based on an ISA version by David Woodhouse. | ||
7 | * Written 1999-2000 by Martin Mares <mj@ucw.cz>. | ||
8 | * Derived from skeleton.c by Donald Becker. | ||
9 | * | ||
10 | * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) | ||
11 | * for sponsoring the further development of this driver. | ||
12 | * | ||
13 | * ********************** | ||
14 | * | ||
15 | * The original copyright of skeleton.c was as follows: | ||
16 | * | ||
17 | * skeleton.c Written 1993 by Donald Becker. | ||
18 | * Copyright 1993 United States Government as represented by the | ||
19 | * Director, National Security Agency. This software may only be used | ||
20 | * and distributed according to the terms of the GNU General Public License as | ||
21 | * modified by SRC, incorporated herein by reference. | ||
22 | * | ||
23 | * ********************** | ||
24 | * | ||
25 | * For more details, see drivers/net/arcnet.c | ||
26 | * | ||
27 | * ********************** | ||
28 | */ | ||
29 | #include <linux/module.h> | ||
30 | #include <linux/moduleparam.h> | ||
31 | #include <linux/kernel.h> | ||
32 | #include <linux/types.h> | ||
33 | #include <linux/ioport.h> | ||
34 | #include <linux/slab.h> | ||
35 | #include <linux/errno.h> | ||
36 | #include <linux/netdevice.h> | ||
37 | #include <linux/init.h> | ||
38 | #include <linux/pci.h> | ||
39 | #include <linux/arcdevice.h> | ||
40 | #include <linux/com20020.h> | ||
41 | |||
42 | #include <asm/io.h> | ||
43 | |||
44 | |||
45 | #define VERSION "arcnet: COM20020 PCI support\n" | ||
46 | |||
47 | /* Module parameters */ | ||
48 | |||
49 | static int node; | ||
50 | static char device[9]; /* use eg. device="arc1" to change name */ | ||
51 | static int timeout = 3; | ||
52 | static int backplane; | ||
53 | static int clockp; | ||
54 | static int clockm; | ||
55 | |||
56 | module_param(node, int, 0); | ||
57 | module_param_string(device, device, sizeof(device), 0); | ||
58 | module_param(timeout, int, 0); | ||
59 | module_param(backplane, int, 0); | ||
60 | module_param(clockp, int, 0); | ||
61 | module_param(clockm, int, 0); | ||
62 | MODULE_LICENSE("GPL"); | ||
63 | |||
64 | static int __devinit com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) | ||
65 | { | ||
66 | struct net_device *dev; | ||
67 | struct arcnet_local *lp; | ||
68 | int ioaddr, err; | ||
69 | |||
70 | if (pci_enable_device(pdev)) | ||
71 | return -EIO; | ||
72 | dev = alloc_arcdev(device); | ||
73 | if (!dev) | ||
74 | return -ENOMEM; | ||
75 | lp = dev->priv; | ||
76 | |||
77 | pci_set_drvdata(pdev, dev); | ||
78 | |||
79 | // SOHARD needs PCI base addr 4 | ||
80 | if (pdev->vendor==0x10B5) { | ||
81 | BUGMSG(D_NORMAL, "SOHARD\n"); | ||
82 | ioaddr = pci_resource_start(pdev, 4); | ||
83 | } | ||
84 | else { | ||
85 | BUGMSG(D_NORMAL, "Contemporary Controls\n"); | ||
86 | ioaddr = pci_resource_start(pdev, 2); | ||
87 | } | ||
88 | |||
89 | if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "com20020-pci")) { | ||
90 | BUGMSG(D_INIT, "IO region %xh-%xh already allocated.\n", | ||
91 | ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1); | ||
92 | err = -EBUSY; | ||
93 | goto out_dev; | ||
94 | } | ||
95 | |||
96 | // Dummy access after Reset | ||
97 | // ARCNET controller needs this access to detect bustype | ||
98 | outb(0x00,ioaddr+1); | ||
99 | inb(ioaddr+1); | ||
100 | |||
101 | dev->base_addr = ioaddr; | ||
102 | dev->irq = pdev->irq; | ||
103 | dev->dev_addr[0] = node; | ||
104 | lp->card_name = "PCI COM20020"; | ||
105 | lp->card_flags = id->driver_data; | ||
106 | lp->backplane = backplane; | ||
107 | lp->clockp = clockp & 7; | ||
108 | lp->clockm = clockm & 3; | ||
109 | lp->timeout = timeout; | ||
110 | lp->hw.owner = THIS_MODULE; | ||
111 | |||
112 | if (ASTATUS() == 0xFF) { | ||
113 | BUGMSG(D_NORMAL, "IO address %Xh was reported by PCI BIOS, " | ||
114 | "but seems empty!\n", ioaddr); | ||
115 | err = -EIO; | ||
116 | goto out_port; | ||
117 | } | ||
118 | if (com20020_check(dev)) { | ||
119 | err = -EIO; | ||
120 | goto out_port; | ||
121 | } | ||
122 | |||
123 | if ((err = com20020_found(dev, SA_SHIRQ)) != 0) | ||
124 | goto out_port; | ||
125 | |||
126 | return 0; | ||
127 | |||
128 | out_port: | ||
129 | release_region(ioaddr, ARCNET_TOTAL_SIZE); | ||
130 | out_dev: | ||
131 | free_netdev(dev); | ||
132 | return err; | ||
133 | } | ||
134 | |||
135 | static void __devexit com20020pci_remove(struct pci_dev *pdev) | ||
136 | { | ||
137 | struct net_device *dev = pci_get_drvdata(pdev); | ||
138 | unregister_netdev(dev); | ||
139 | free_irq(dev->irq, dev); | ||
140 | release_region(dev->base_addr, ARCNET_TOTAL_SIZE); | ||
141 | free_netdev(dev); | ||
142 | } | ||
143 | |||
144 | static struct pci_device_id com20020pci_id_table[] = { | ||
145 | { 0x1571, 0xa001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | ||
146 | { 0x1571, 0xa002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | ||
147 | { 0x1571, 0xa003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | ||
148 | { 0x1571, 0xa004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | ||
149 | { 0x1571, 0xa005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | ||
150 | { 0x1571, 0xa006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | ||
151 | { 0x1571, 0xa007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | ||
152 | { 0x1571, 0xa008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | ||
153 | { 0x1571, 0xa009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, | ||
154 | { 0x1571, 0xa00a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, | ||
155 | { 0x1571, 0xa00b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, | ||
156 | { 0x1571, 0xa00c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, | ||
157 | { 0x1571, 0xa00d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_IS_5MBIT }, | ||
158 | { 0x1571, 0xa201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, | ||
159 | { 0x1571, 0xa202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, | ||
160 | { 0x1571, 0xa203, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, | ||
161 | { 0x1571, 0xa204, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, | ||
162 | { 0x1571, 0xa205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, | ||
163 | { 0x1571, 0xa206, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, | ||
164 | { 0x10B5, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ARC_CAN_10MBIT }, | ||
165 | {0,} | ||
166 | }; | ||
167 | |||
168 | MODULE_DEVICE_TABLE(pci, com20020pci_id_table); | ||
169 | |||
170 | static struct pci_driver com20020pci_driver = { | ||
171 | .name = "com20020", | ||
172 | .id_table = com20020pci_id_table, | ||
173 | .probe = com20020pci_probe, | ||
174 | .remove = __devexit_p(com20020pci_remove), | ||
175 | }; | ||
176 | |||
177 | static int __init com20020pci_init(void) | ||
178 | { | ||
179 | BUGLVL(D_NORMAL) printk(VERSION); | ||
180 | return pci_module_init(&com20020pci_driver); | ||
181 | } | ||
182 | |||
183 | static void __exit com20020pci_cleanup(void) | ||
184 | { | ||
185 | pci_unregister_driver(&com20020pci_driver); | ||
186 | } | ||
187 | |||
188 | module_init(com20020pci_init) | ||
189 | module_exit(com20020pci_cleanup) | ||