1 files changed, 80 insertions, 85 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b49375abb5f4..dbf773356326 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -3,10 +3,7 @@
 # Network device configuration
 #
 
-menu "Network device support"
-        depends on NET
-
-config NETDEVICES
+menuconfig NETDEVICES
         default y if UML
         bool "Network device support"
         ---help---
@@ -151,11 +148,9 @@ source "drivers/net/phy/Kconfig"
 #       Ethernet
 #
 
-menu "Ethernet (10 or 100Mbit)"
-        depends on !UML
-
-config NET_ETHERNET
+menuconfig NET_ETHERNET
         bool "Ethernet (10 or 100Mbit)"
+        depends on !UML
         ---help---
           Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
           type of Local Area Network (LAN) in universities and companies.
@@ -180,9 +175,10 @@ config NET_ETHERNET
           kernel: saying N will just cause the configurator to skip all
           the questions about Ethernet network cards. If unsure, say N.
 
+if NET_ETHERNET
+
 config MII
         tristate "Generic Media Independent Interface device support"
-        depends on NET_ETHERNET
         help
           Most ethernet controllers have MII transceiver either as an external
           or internal device.  It is safe to say Y or M here even if your
@@ -190,7 +186,7 @@ config MII
 
 config MACB
         tristate "Atmel MACB support"
-        depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
+        depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263
         select MII
         help
           The Atmel MACB ethernet interface is found on many AT32 and AT91
@@ -203,7 +199,7 @@ source "drivers/net/arm/Kconfig"
 
 config MACE
         tristate "MACE (Power Mac ethernet) support"
-        depends on NET_ETHERNET && PPC_PMAC && PPC32
+        depends on PPC_PMAC && PPC32
         select CRC32
         help
           Power Macintoshes and clones with Ethernet built-in on the
@@ -226,7 +222,7 @@ config MACE_AAUI_PORT
 
 config BMAC
         tristate "BMAC (G3 ethernet) support"
-        depends on NET_ETHERNET && PPC_PMAC && PPC32
+        depends on PPC_PMAC && PPC32
         select CRC32
         help
           Say Y for support of BMAC Ethernet interfaces. These are used on G3
@@ -237,7 +233,7 @@ config BMAC
 
 config ARIADNE
         tristate "Ariadne support"
-        depends on NET_ETHERNET && ZORRO
+        depends on ZORRO
         help
           If you have a Village Tronic Ariadne Ethernet adapter, say Y.
           Otherwise, say N.
@@ -247,7 +243,7 @@ config ARIADNE
 
 config A2065
         tristate "A2065 support"
-        depends on NET_ETHERNET && ZORRO
+        depends on ZORRO
         select CRC32
         help
           If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
@@ -258,7 +254,7 @@ config A2065
 
 config HYDRA
         tristate "Hydra support"
-        depends on NET_ETHERNET && ZORRO
+        depends on ZORRO
         select CRC32
         help
           If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
@@ -268,7 +264,7 @@ config HYDRA
 
 config ZORRO8390
         tristate "Zorro NS8390-based Ethernet support"
-        depends on NET_ETHERNET && ZORRO
+        depends on ZORRO
         select CRC32
         help
           This driver is for Zorro Ethernet cards using an NS8390-compatible
@@ -281,7 +277,7 @@ config ZORRO8390
 
 config APNE
         tristate "PCMCIA NE2000 support"
-        depends on NET_ETHERNET && AMIGA_PCMCIA
+        depends on AMIGA_PCMCIA
         select CRC32
         help
           If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
@@ -292,7 +288,7 @@ config APNE
 
 config APOLLO_ELPLUS
         tristate "Apollo 3c505 support"
-        depends on NET_ETHERNET && APOLLO
+        depends on APOLLO
         help
           Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
           If you don't have one made for Apollos, you can use one from a PC,
@@ -301,7 +297,7 @@ config APOLLO_ELPLUS
 
 config MAC8390
         bool "Macintosh NS 8390 based ethernet cards"
-        depends on NET_ETHERNET && MAC
+        depends on MAC
         select CRC32
         help
           If you want to include a driver to support Nubus or LC-PDS
@@ -311,7 +307,7 @@ config MAC8390
 
 config MAC89x0
         tristate "Macintosh CS89x0 based ethernet cards"
-        depends on NET_ETHERNET && MAC
+        depends on MAC
         ---help---
           Support for CS89x0 chipset based Ethernet cards.  If you have a
           Nubus or LC-PDS network (Ethernet) card of this type, say Y and
@@ -324,7 +320,7 @@ config MAC89x0
 
 config MACSONIC
         tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
-        depends on NET_ETHERNET && MAC
+        depends on MAC
         ---help---
           Support for NatSemi SONIC based Ethernet devices.  This includes
           the onboard Ethernet in many Quadras as well as some LC-PDS,
@@ -338,7 +334,7 @@ config MACSONIC
 
 config MACMACE
         bool "Macintosh (AV) onboard MACE ethernet"
-        depends on NET_ETHERNET && MAC
+        depends on MAC
         select CRC32
         help
           Support for the onboard AMD 79C940 MACE Ethernet controller used in
@@ -348,7 +344,7 @@ config MACMACE
 
 config MVME147_NET
         tristate "MVME147 (Lance) Ethernet support"
-        depends on NET_ETHERNET && MVME147
+        depends on MVME147
         select CRC32
         help
           Support for the on-board Ethernet interface on the Motorola MVME147
@@ -358,7 +354,7 @@ config MVME147_NET
 
 config MVME16x_NET
         tristate "MVME16x Ethernet support"
-        depends on NET_ETHERNET && MVME16x
+        depends on MVME16x
         help
           This is the driver for the Ethernet interface on the Motorola
           MVME162, 166, 167, 172 and 177 boards.  Say Y here to include the
@@ -367,7 +363,7 @@ config MVME16x_NET
 
 config BVME6000_NET
         tristate "BVME6000 Ethernet support"
-        depends on NET_ETHERNET && BVME6000
+        depends on BVME6000
         help
           This is the driver for the Ethernet interface on BVME4000 and
           BVME6000 VME boards.  Say Y here to include the driver for this chip
@@ -376,7 +372,7 @@ config BVME6000_NET
 
 config ATARILANCE
         tristate "Atari Lance support"
-        depends on NET_ETHERNET && ATARI
+        depends on ATARI
         help
           Say Y to include support for several Atari Ethernet adapters based
           on the AMD Lance chipset: RieblCard (with or without battery), or
@@ -384,7 +380,7 @@ config ATARILANCE
 
 config ATARI_BIONET
         tristate "BioNet-100 support"
-        depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
+        depends on ATARI && ATARI_ACSI && BROKEN
         help
           Say Y to include support for BioData's BioNet-100 Ethernet adapter
           for the ACSI port. The driver works (has to work...) with a polled
@@ -392,7 +388,7 @@ config ATARI_BIONET
 
 config ATARI_PAMSNET
         tristate "PAMsNet support"
-        depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
+        depends on ATARI && ATARI_ACSI && BROKEN
         help
           Say Y to include support for the PAMsNet Ethernet adapter for the
           ACSI port ("ACSI node"). The driver works (has to work...) with a
@@ -400,7 +396,7 @@ config ATARI_PAMSNET
 
 config SUN3LANCE
         tristate "Sun3/Sun3x on-board LANCE support"
-        depends on NET_ETHERNET && (SUN3 || SUN3X)
+        depends on SUN3 || SUN3X
         help
           Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
           featured an AMD Lance 10Mbit Ethernet controller on board; say Y
@@ -413,7 +409,7 @@ config SUN3LANCE
 
 config SUN3_82586
         bool "Sun3 on-board Intel 82586 support"
-        depends on NET_ETHERNET && SUN3
+        depends on SUN3
         help
           This driver enables support for the on-board Intel 82586 based
           Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards.  Note
@@ -422,7 +418,7 @@ config SUN3_82586
 
 config HPLANCE
         bool "HP on-board LANCE support"
-        depends on NET_ETHERNET && DIO
+        depends on DIO
         select CRC32
         help
           If you want to use the builtin "LANCE" Ethernet controller on an
@@ -430,21 +426,21 @@ config HPLANCE
 
 config LASI_82596
         tristate "Lasi ethernet"
-        depends on NET_ETHERNET && GSC
+        depends on GSC
         help
           Say Y here to support the builtin Intel 82596 ethernet controller
           found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
 
 config MIPS_JAZZ_SONIC
         tristate "MIPS JAZZ onboard SONIC Ethernet support"
-        depends on NET_ETHERNET && MACH_JAZZ
+        depends on MACH_JAZZ
         help
           This is the driver for the onboard card of MIPS Magnum 4000,
           Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
 
 config MIPS_AU1X00_ENET
         bool "MIPS AU1000 Ethernet support"
-        depends on NET_ETHERNET && SOC_AU1X00
+        depends on SOC_AU1X00
         select PHYLIB
         select CRC32
         help
@@ -453,11 +449,11 @@ config MIPS_AU1X00_ENET
 
 config NET_SB1250_MAC
         tristate "SB1250 Ethernet support"
-        depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
+        depends on SIBYTE_SB1xxx_SOC
 
 config SGI_IOC3_ETH
         bool "SGI IOC3 Ethernet"
-        depends on NET_ETHERNET && PCI && SGI_IP27
+        depends on PCI && SGI_IP27
         select CRC32
         select MII
         help
@@ -487,7 +483,7 @@ config SGI_IOC3_ETH_HW_TX_CSUM
 
 config MIPS_SIM_NET
         tristate "MIPS simulator Network device"
-        depends on NET_ETHERNET && MIPS_SIM
+        depends on MIPS_SIM
         help
           The MIPSNET device is a simple Ethernet network device which is
           emulated by the MIPS Simulator.
@@ -495,11 +491,11 @@ config MIPS_SIM_NET
 
 config SGI_O2MACE_ETH
         tristate "SGI O2 MACE Fast Ethernet support"
-        depends on NET_ETHERNET && SGI_IP32=y
+        depends on SGI_IP32=y
 
 config STNIC
         tristate "National DP83902AV  support"
-        depends on NET_ETHERNET && SUPERH
+        depends on SUPERH
         select CRC32
         help
           Support for cards based on the National Semiconductor DP83902AV
@@ -511,7 +507,7 @@ config STNIC
 
 config SUNLANCE
         tristate "Sun LANCE support"
-        depends on NET_ETHERNET && SBUS
+        depends on SBUS
         select CRC32
         help
           This driver supports the "le" interface present on all 32-bit Sparc
@@ -524,7 +520,7 @@ config SUNLANCE
 
 config HAPPYMEAL
         tristate "Sun Happy Meal 10/100baseT support"
-        depends on NET_ETHERNET && (SBUS || PCI)
+        depends on SBUS || PCI
         select CRC32
         help
           This driver supports the "hme" interface present on most Ultra
@@ -537,7 +533,7 @@ config HAPPYMEAL
 
 config SUNBMAC
         tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
-        depends on NET_ETHERNET && SBUS && EXPERIMENTAL
+        depends on SBUS && EXPERIMENTAL
         select CRC32
         help
           This driver supports the "be" interface available as an Sbus option.
@@ -548,7 +544,7 @@ config SUNBMAC
 
 config SUNQE
         tristate "Sun QuadEthernet support"
-        depends on NET_ETHERNET && SBUS
+        depends on SBUS
         select CRC32
         help
           This driver supports the "qe" 10baseT Ethernet device, available as
@@ -560,7 +556,7 @@ config SUNQE
 
 config SUNGEM
         tristate "Sun GEM support"
-        depends on NET_ETHERNET && PCI
+        depends on PCI
         select CRC32
         help
           Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0.  See also
@@ -568,7 +564,7 @@ config SUNGEM
 
 config CASSINI
         tristate "Sun Cassini support"
-        depends on NET_ETHERNET && PCI
+        depends on PCI
         select CRC32
         help
           Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
@@ -576,7 +572,7 @@ config CASSINI
 
 config NET_VENDOR_3COM
         bool "3COM cards"
-        depends on NET_ETHERNET && (ISA || EISA || MCA || PCI)
+        depends on ISA || EISA || MCA || PCI
         help
           If you have a network (Ethernet) card belonging to this class, say Y
           and read the Ethernet-HOWTO, available from
@@ -736,7 +732,7 @@ config TYPHOON
 
 config LANCE
         tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
-        depends on NET_ETHERNET && ISA && ISA_DMA_API
+        depends on ISA && ISA_DMA_API
         help
           If you have a network (Ethernet) card of this type, say Y and read
           the Ethernet-HOWTO, available from
@@ -748,7 +744,7 @@ config LANCE
 
 config NET_VENDOR_SMC
         bool "Western Digital/SMC cards"
-        depends on NET_ETHERNET && (ISA || MCA || EISA || MAC)
+        depends on ISA || MCA || EISA || MAC
         help
           If you have a network (Ethernet) card belonging to this class, say Y
           and read the Ethernet-HOWTO, available from
@@ -818,11 +814,27 @@ config ULTRA32
           <file:Documentation/networking/net-modules.txt>. The module
           will be called smc-ultra32.
 
+config SMC9194
+        tristate "SMC 9194 support"
+        depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
+        select CRC32
+        ---help---
+          This is support for the SMC9xxx based Ethernet cards. Choose this
+          option if you have a DELL laptop with the docking station, or
+          another SMC9192/9194 based chipset.  Say Y if you want it compiled
+          into the kernel, and read the file
+          <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+          available from <http://www.tldp.org/docs.html#howto>.
+
+          To compile this driver as a module, choose M here and read
+          <file:Documentation/networking/net-modules.txt>. The module
+          will be called smc9194.
+
 config SMC91X
         tristate "SMC 91C9x/91C1xxx support"
         select CRC32
         select MII
-        depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN)
+        depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN
         help
           This is a driver for SMC's 91x series of Ethernet chipsets,
           including the SMC91C94 and the SMC91C111. Say Y if you want it
@@ -836,26 +848,10 @@ config SMC91X
           module, say M here and read <file:Documentation/kbuild/modules.txt>
           as well as <file:Documentation/networking/net-modules.txt>.
 
-config SMC9194
-        tristate "SMC 9194 support"
-        depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
-        select CRC32
-        ---help---
-          This is support for the SMC9xxx based Ethernet cards. Choose this
-          option if you have a DELL laptop with the docking station, or
-          another SMC9192/9194 based chipset.  Say Y if you want it compiled
-          into the kernel, and read the file
-          <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
-          available from <http://www.tldp.org/docs.html#howto>.
-
-          To compile this driver as a module, choose M here and read
-          <file:Documentation/networking/net-modules.txt>. The module
-          will be called smc9194.
-
 config NET_NETX
         tristate "NetX Ethernet support"
         select MII
-        depends on NET_ETHERNET && ARCH_NETX
+        depends on ARCH_NETX
         help
           This is support for the Hilscher netX builtin Ethernet ports
 
@@ -865,7 +861,7 @@ config NET_NETX
 
 config DM9000
         tristate "DM9000 support"
-        depends on (ARM || MIPS) && NET_ETHERNET
+        depends on ARM || MIPS
         select CRC32
         select MII
         ---help---
@@ -879,7 +875,7 @@ config SMC911X
         tristate "SMSC LAN911[5678] support"
         select CRC32
         select MII
-        depends on NET_ETHERNET && ARCH_PXA
+        depends on ARCH_PXA
         help
           This is a driver for SMSC's LAN911x series of Ethernet chipsets
           including the new LAN9115, LAN9116, LAN9117, and LAN9118.
@@ -893,7 +889,7 @@ config SMC911X
 
 config NET_VENDOR_RACAL
         bool "Racal-Interlan (Micom) NI cards"
-        depends on NET_ETHERNET && ISA
+        depends on ISA
         help
           If you have a network (Ethernet) card belonging to this class, such
           as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
@@ -945,7 +941,7 @@ source "drivers/net/tulip/Kconfig"
 
 config AT1700
         tristate "AT1700/1720 support (EXPERIMENTAL)"
-        depends on NET_ETHERNET && (ISA || MCA_LEGACY) && EXPERIMENTAL
+        depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
         select CRC32
         ---help---
           If you have a network (Ethernet) card of this type, say Y and read
@@ -958,7 +954,7 @@ config AT1700
 
 config DEPCA
         tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
-        depends on NET_ETHERNET && (ISA || EISA || MCA)
+        depends on ISA || EISA || MCA
         select CRC32
         ---help---
           If you have a network (Ethernet) card of this type, say Y and read
@@ -972,7 +968,7 @@ config DEPCA
 
 config HP100
         tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
-        depends on NET_ETHERNET && (ISA || EISA || PCI)
+        depends on ISA || EISA || PCI
         help
           If you have a network (Ethernet) card of this type, say Y and read
           the Ethernet-HOWTO, available from
@@ -984,7 +980,7 @@ config HP100
 
 config NET_ISA
         bool "Other ISA cards"
-        depends on NET_ETHERNET && ISA
+        depends on ISA
         ---help---
           If your network (Ethernet) card hasn't been mentioned yet and its
           bus system (that's the way the cards talks to the other components
@@ -1147,7 +1143,7 @@ config SEEQ8005
 
 config NE2_MCA
         tristate "NE/2 (ne2000 MCA version) support"
-        depends on NET_ETHERNET && MCA_LEGACY
+        depends on MCA_LEGACY
         select CRC32
         help
           If you have a network (Ethernet) card of this type, say Y and read
@@ -1160,7 +1156,7 @@ config NE2_MCA
 
 config IBMLANA
         tristate "IBM LAN Adapter/A support"
-        depends on NET_ETHERNET && MCA && MCA_LEGACY
+        depends on MCA && MCA_LEGACY
         ---help---
           This is a Micro Channel Ethernet adapter.  You need to set
           CONFIG_MCA to use this driver.  It is both available as an in-kernel
@@ -1176,7 +1172,7 @@ config IBMLANA
 
 config IBMVETH
         tristate "IBM LAN Virtual Ethernet support"
-        depends on NET_ETHERNET && PPC_PSERIES
+        depends on PPC_PSERIES
         ---help---
           This driver supports virtual ethernet adapters on newer IBM iSeries
           and pSeries systems.
@@ -1257,7 +1253,7 @@ config IBM_EMAC_TAH
 
 config NET_PCI
         bool "EISA, VLB, PCI and on board controllers"
-        depends on NET_ETHERNET && (ISA || EISA || PCI)
+        depends on ISA || EISA || PCI
         help
           This is another class of network cards which attach directly to the
           bus. If you have one of those, say Y and read the Ethernet-HOWTO,
@@ -1313,6 +1309,7 @@ config AMD8111_ETH
           To compile this driver as a module, choose M here and read
           <file:Documentation/networking/net-modules.txt>. The module
           will be called amd8111e.
+
 config AMD8111E_NAPI
         bool "Enable NAPI support"
         depends on AMD8111_ETH
@@ -1778,7 +1775,7 @@ config SC92031
 
 config NET_POCKET
         bool "Pocket and portable adapters"
-        depends on NET_ETHERNET && PARPORT
+        depends on PARPORT
         ---help---
           Cute little network (Ethernet) devices which attach to the parallel
           port ("pocket adapters"), commonly used with laptops. If you have
@@ -1847,14 +1844,14 @@ config DE620
 
 config SGISEEQ
         tristate "SGI Seeq ethernet controller support"
-        depends on NET_ETHERNET && SGI_IP22
+        depends on SGI_IP22
         help
           Say Y here if you have an Seeq based Ethernet network card. This is
           used in many Silicon Graphics machines.
 
 config DECLANCE
         tristate "DEC LANCE ethernet controller support"
-        depends on NET_ETHERNET && MACH_DECSTATION
+        depends on MACH_DECSTATION
         select CRC32
         help
           This driver is for the series of Ethernet controllers produced by
@@ -1884,7 +1881,7 @@ config FEC2
 
 config NE_H8300
         tristate "NE2000 compatible support for H8/300"
-        depends on H8300 && NET_ETHERNET
+        depends on H8300
         help
           Say Y here if you want to use the NE2000 compatible
           controller on the Renesas H8/300 processor.
@@ -1892,7 +1889,7 @@ config NE_H8300
 source "drivers/net/fec_8xx/Kconfig"
 source "drivers/net/fs_enet/Kconfig"
 
-endmenu
+endif # NET_ETHERNET
 
 #
 #       Gigabit Ethernet
@@ -2948,8 +2945,6 @@ config NETCONSOLE
         If you want to log kernel messages over the network, enable this.
         See <file:Documentation/networking/netconsole.txt> for details.
 
-endif #NETDEVICES
-
 config NETPOLL
         def_bool NETCONSOLE
 
@@ -2961,4 +2956,4 @@ config NETPOLL_TRAP
 config NET_POLL_CONTROLLER
         def_bool NETPOLL
 
-endmenu
+endif # NETDEVICES