11 files changed, 7 insertions, 26 deletions

diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 9408099eec48..35c6a23b183b 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/chips/Kconfig
-
 menu "RAM/ROM/Flash chip drivers"
         depends on MTD!=n
 
@@ -242,4 +240,3 @@ config MTD_XIP
           then say N.
 
 endmenu
-
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index c222514bb70d..35081ce77fbd 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/maps/Kconfig
-
 menu "Self-contained MTD device drivers"
         depends on MTD!=n
 
@@ -308,4 +306,3 @@ config MTD_DOCPROBE_55AA
           you have managed to wipe the first block.
 
 endmenu
-
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index 3aa05cd18ea1..592016a0668f 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -18,7 +18,7 @@
                 to specify the offset instead of the absolute address
 
   NOTE:
-  With slram it's only possible to map a contigous memory region. Therfore
+  With slram it's only possible to map a contiguous memory region. Therefore
   if there's a device mapped somewhere in the region specified slram will
   fail to load (see kernel log if modprobe fails).
 
diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig
index 5a401d8047ab..265f969817e3 100644
--- a/drivers/mtd/lpddr/Kconfig
+++ b/drivers/mtd/lpddr/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/chips/Kconfig
-
 menu "LPDDR flash memory drivers"
         depends on MTD!=n
 
@@ -20,4 +18,3 @@ config MTD_QINFO_PROBE
             families of devices. This serves similar purpose of CFI on legacy
             Flash products
 endmenu
-
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 14be0755d7cd..847e214ade59 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/maps/Kconfig
-
 menu "Mapping drivers for chip access"
         depends on MTD!=n
 
@@ -389,9 +387,9 @@ config MTD_IXP2000
         depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
         help
           This enables MTD access to flash devices on platforms based
-          on Intel's IXP2000 family of network processors such as the
-          IXDP425 and Coyote. If you have an IXP2000 based board and
-          would like to use the flash chips on it, say 'Y'.
+          on Intel's IXP2000 family of network processors. If you have an
+          IXP2000 based board and would like to use the flash chips on it,
+          say 'Y'.
 
 config MTD_FORTUNET
         tristate "CFI Flash device mapped on the FortuNet board"
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 2fda0b615246..6264bf14494c 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/nand/Kconfig
-
 menuconfig MTD_NAND
         tristate "NAND Device Support"
         depends on MTD
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index e51c1ed7ac18..b126cf887476 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -1056,7 +1056,7 @@ static struct nand_ecclayout doc200x_oobinfo = {
 };
 
 /* Find the (I)NFTL Media Header, and optionally also the mirror media header.
-   On sucessful return, buf will contain a copy of the media header for
+   On successful return, buf will contain a copy of the media header for
    further processing.  id is the string to scan for, and will presumably be
    either "ANAND" or "BNAND".  If findmirror=1, also look for the mirror media
    header.  The page #s of the found media headers are placed in mh0_page and
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index db7ae9d6a296..92320a643275 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -475,7 +475,7 @@ int __nand_correct_data(unsigned char *buf,
                  *
                  * The b2 shift is there to get rid of the lowest two bits.
                  * We could also do addressbits[b2] >> 1 but for the
-                 * performace it does not make any difference
+                 * performance it does not make any difference
                  */
                 if (eccsize_mult == 1)
                         byte_addr = (addressbits[b1] << 4) + addressbits[b0];
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 11dc7e69c4fb..68b5b3a486a9 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -875,7 +875,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
  * @info: The controller instance.
  * @nmtd: The driver version of the MTD instance.
  *
- * This routine is called after the chip probe has succesfully completed
+ * This routine is called after the chip probe has successfully completed
  * and the relevant per-chip information updated. This call ensure that
  * we update the internal state accordingly.
  *
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index a38f580c2bb3..3a9f15784600 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -1,7 +1,3 @@
-#
-# linux/drivers/mtd/onenand/Kconfig
-#
-
 menuconfig MTD_ONENAND
         tristate "OneNAND Device Support"
         depends on MTD
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index b1cd7a1a2191..0a8c7ea764ae 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/ubi/Kconfig
-
 menu "UBI - Unsorted block images"
         depends on MTD