diff options
Diffstat (limited to 'drivers/mtd/devices/doc2000.c')
-rw-r--r-- | drivers/mtd/devices/doc2000.c | 1178 |
1 files changed, 0 insertions, 1178 deletions
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c deleted file mode 100644 index 363ec3c55d92..000000000000 --- a/drivers/mtd/devices/doc2000.c +++ /dev/null | |||
@@ -1,1178 +0,0 @@ | |||
1 | |||
2 | /* | ||
3 | * Linux driver for Disk-On-Chip 2000 and Millennium | ||
4 | * (c) 1999 Machine Vision Holdings, Inc. | ||
5 | * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org> | ||
6 | */ | ||
7 | |||
8 | #include <linux/kernel.h> | ||
9 | #include <linux/module.h> | ||
10 | #include <asm/errno.h> | ||
11 | #include <asm/io.h> | ||
12 | #include <asm/uaccess.h> | ||
13 | #include <linux/delay.h> | ||
14 | #include <linux/slab.h> | ||
15 | #include <linux/sched.h> | ||
16 | #include <linux/init.h> | ||
17 | #include <linux/types.h> | ||
18 | #include <linux/bitops.h> | ||
19 | #include <linux/mutex.h> | ||
20 | |||
21 | #include <linux/mtd/mtd.h> | ||
22 | #include <linux/mtd/nand.h> | ||
23 | #include <linux/mtd/doc2000.h> | ||
24 | |||
25 | #define DOC_SUPPORT_2000 | ||
26 | #define DOC_SUPPORT_2000TSOP | ||
27 | #define DOC_SUPPORT_MILLENNIUM | ||
28 | |||
29 | #ifdef DOC_SUPPORT_2000 | ||
30 | #define DoC_is_2000(doc) (doc->ChipID == DOC_ChipID_Doc2k) | ||
31 | #else | ||
32 | #define DoC_is_2000(doc) (0) | ||
33 | #endif | ||
34 | |||
35 | #if defined(DOC_SUPPORT_2000TSOP) || defined(DOC_SUPPORT_MILLENNIUM) | ||
36 | #define DoC_is_Millennium(doc) (doc->ChipID == DOC_ChipID_DocMil) | ||
37 | #else | ||
38 | #define DoC_is_Millennium(doc) (0) | ||
39 | #endif | ||
40 | |||
41 | /* #define ECC_DEBUG */ | ||
42 | |||
43 | /* I have no idea why some DoC chips can not use memcpy_from|to_io(). | ||
44 | * This may be due to the different revisions of the ASIC controller built-in or | ||
45 | * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment | ||
46 | * this: | ||
47 | #undef USE_MEMCPY | ||
48 | */ | ||
49 | |||
50 | static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, | ||
51 | size_t *retlen, u_char *buf); | ||
52 | static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, | ||
53 | size_t *retlen, const u_char *buf); | ||
54 | static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, | ||
55 | struct mtd_oob_ops *ops); | ||
56 | static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, | ||
57 | struct mtd_oob_ops *ops); | ||
58 | static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len, | ||
59 | size_t *retlen, const u_char *buf); | ||
60 | static int doc_erase (struct mtd_info *mtd, struct erase_info *instr); | ||
61 | |||
62 | static struct mtd_info *doc2klist = NULL; | ||
63 | |||
64 | /* Perform the required delay cycles by reading from the appropriate register */ | ||
65 | static void DoC_Delay(struct DiskOnChip *doc, unsigned short cycles) | ||
66 | { | ||
67 | volatile char dummy; | ||
68 | int i; | ||
69 | |||
70 | for (i = 0; i < cycles; i++) { | ||
71 | if (DoC_is_Millennium(doc)) | ||
72 | dummy = ReadDOC(doc->virtadr, NOP); | ||
73 | else | ||
74 | dummy = ReadDOC(doc->virtadr, DOCStatus); | ||
75 | } | ||
76 | |||
77 | } | ||
78 | |||
79 | /* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */ | ||
80 | static int _DoC_WaitReady(struct DiskOnChip *doc) | ||
81 | { | ||
82 | void __iomem *docptr = doc->virtadr; | ||
83 | unsigned long timeo = jiffies + (HZ * 10); | ||
84 | |||
85 | pr_debug("_DoC_WaitReady called for out-of-line wait\n"); | ||
86 | |||
87 | /* Out-of-line routine to wait for chip response */ | ||
88 | while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) { | ||
89 | /* issue 2 read from NOP register after reading from CDSNControl register | ||
90 | see Software Requirement 11.4 item 2. */ | ||
91 | DoC_Delay(doc, 2); | ||
92 | |||
93 | if (time_after(jiffies, timeo)) { | ||
94 | pr_debug("_DoC_WaitReady timed out.\n"); | ||
95 | return -EIO; | ||
96 | } | ||
97 | udelay(1); | ||
98 | cond_resched(); | ||
99 | } | ||
100 | |||
101 | return 0; | ||
102 | } | ||
103 | |||
104 | static inline int DoC_WaitReady(struct DiskOnChip *doc) | ||
105 | { | ||
106 | void __iomem *docptr = doc->virtadr; | ||
107 | |||
108 | /* This is inline, to optimise the common case, where it's ready instantly */ | ||
109 | int ret = 0; | ||
110 | |||
111 | /* 4 read form NOP register should be issued in prior to the read from CDSNControl | ||
112 | see Software Requirement 11.4 item 2. */ | ||
113 | DoC_Delay(doc, 4); | ||
114 | |||
115 | if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) | ||
116 | /* Call the out-of-line routine to wait */ | ||
117 | ret = _DoC_WaitReady(doc); | ||
118 | |||
119 | /* issue 2 read from NOP register after reading from CDSNControl register | ||
120 | see Software Requirement 11.4 item 2. */ | ||
121 | DoC_Delay(doc, 2); | ||
122 | |||
123 | return ret; | ||
124 | } | ||
125 | |||
126 | /* DoC_Command: Send a flash command to the flash chip through the CDSN Slow IO register to | ||
127 | bypass the internal pipeline. Each of 4 delay cycles (read from the NOP register) is | ||
128 | required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */ | ||
129 | |||
130 | static int DoC_Command(struct DiskOnChip *doc, unsigned char command, | ||
131 | unsigned char xtraflags) | ||
132 | { | ||
133 | void __iomem *docptr = doc->virtadr; | ||
134 | |||
135 | if (DoC_is_2000(doc)) | ||
136 | xtraflags |= CDSN_CTRL_FLASH_IO; | ||
137 | |||
138 | /* Assert the CLE (Command Latch Enable) line to the flash chip */ | ||
139 | WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl); | ||
140 | DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ | ||
141 | |||
142 | if (DoC_is_Millennium(doc)) | ||
143 | WriteDOC(command, docptr, CDSNSlowIO); | ||
144 | |||
145 | /* Send the command */ | ||
146 | WriteDOC_(command, docptr, doc->ioreg); | ||
147 | if (DoC_is_Millennium(doc)) | ||
148 | WriteDOC(command, docptr, WritePipeTerm); | ||
149 | |||
150 | /* Lower the CLE line */ | ||
151 | WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl); | ||
152 | DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ | ||
153 | |||
154 | /* Wait for the chip to respond - Software requirement 11.4.1 (extended for any command) */ | ||
155 | return DoC_WaitReady(doc); | ||
156 | } | ||
157 | |||
158 | /* DoC_Address: Set the current address for the flash chip through the CDSN Slow IO register to | ||
159 | bypass the internal pipeline. Each of 4 delay cycles (read from the NOP register) is | ||
160 | required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */ | ||
161 | |||
162 | static int DoC_Address(struct DiskOnChip *doc, int numbytes, unsigned long ofs, | ||
163 | unsigned char xtraflags1, unsigned char xtraflags2) | ||
164 | { | ||
165 | int i; | ||
166 | void __iomem *docptr = doc->virtadr; | ||
167 | |||
168 | if (DoC_is_2000(doc)) | ||
169 | xtraflags1 |= CDSN_CTRL_FLASH_IO; | ||
170 | |||
171 | /* Assert the ALE (Address Latch Enable) line to the flash chip */ | ||
172 | WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl); | ||
173 | |||
174 | DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ | ||
175 | |||
176 | /* Send the address */ | ||
177 | /* Devices with 256-byte page are addressed as: | ||
178 | Column (bits 0-7), Page (bits 8-15, 16-23, 24-31) | ||
179 | * there is no device on the market with page256 | ||
180 | and more than 24 bits. | ||
181 | Devices with 512-byte page are addressed as: | ||
182 | Column (bits 0-7), Page (bits 9-16, 17-24, 25-31) | ||
183 | * 25-31 is sent only if the chip support it. | ||
184 | * bit 8 changes the read command to be sent | ||
185 | (NAND_CMD_READ0 or NAND_CMD_READ1). | ||
186 | */ | ||
187 | |||
188 | if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE) { | ||
189 | if (DoC_is_Millennium(doc)) | ||
190 | WriteDOC(ofs & 0xff, docptr, CDSNSlowIO); | ||
191 | WriteDOC_(ofs & 0xff, docptr, doc->ioreg); | ||
192 | } | ||
193 | |||
194 | if (doc->page256) { | ||
195 | ofs = ofs >> 8; | ||
196 | } else { | ||
197 | ofs = ofs >> 9; | ||
198 | } | ||
199 | |||
200 | if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE) { | ||
201 | for (i = 0; i < doc->pageadrlen; i++, ofs = ofs >> 8) { | ||
202 | if (DoC_is_Millennium(doc)) | ||
203 | WriteDOC(ofs & 0xff, docptr, CDSNSlowIO); | ||
204 | WriteDOC_(ofs & 0xff, docptr, doc->ioreg); | ||
205 | } | ||
206 | } | ||
207 | |||
208 | if (DoC_is_Millennium(doc)) | ||
209 | WriteDOC(ofs & 0xff, docptr, WritePipeTerm); | ||
210 | |||
211 | DoC_Delay(doc, 2); /* Needed for some slow flash chips. mf. */ | ||
212 | |||
213 | /* FIXME: The SlowIO's for millennium could be replaced by | ||
214 | a single WritePipeTerm here. mf. */ | ||
215 | |||
216 | /* Lower the ALE line */ | ||
217 | WriteDOC(xtraflags1 | xtraflags2 | CDSN_CTRL_CE, docptr, | ||
218 | CDSNControl); | ||
219 | |||
220 | DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ | ||
221 | |||
222 | /* Wait for the chip to respond - Software requirement 11.4.1 */ | ||
223 | return DoC_WaitReady(doc); | ||
224 | } | ||
225 | |||
226 | /* Read a buffer from DoC, taking care of Millennium odditys */ | ||
227 | static void DoC_ReadBuf(struct DiskOnChip *doc, u_char * buf, int len) | ||
228 | { | ||
229 | volatile int dummy; | ||
230 | int modulus = 0xffff; | ||
231 | void __iomem *docptr = doc->virtadr; | ||
232 | int i; | ||
233 | |||
234 | if (len <= 0) | ||
235 | return; | ||
236 | |||
237 | if (DoC_is_Millennium(doc)) { | ||
238 | /* Read the data via the internal pipeline through CDSN IO register, | ||
239 | see Pipelined Read Operations 11.3 */ | ||
240 | dummy = ReadDOC(docptr, ReadPipeInit); | ||
241 | |||
242 | /* Millennium should use the LastDataRead register - Pipeline Reads */ | ||
243 | len--; | ||
244 | |||
245 | /* This is needed for correctly ECC calculation */ | ||
246 | modulus = 0xff; | ||
247 | } | ||
248 | |||
249 | for (i = 0; i < len; i++) | ||
250 | buf[i] = ReadDOC_(docptr, doc->ioreg + (i & modulus)); | ||
251 | |||
252 | if (DoC_is_Millennium(doc)) { | ||
253 | buf[i] = ReadDOC(docptr, LastDataRead); | ||
254 | } | ||
255 | } | ||
256 | |||
257 | /* Write a buffer to DoC, taking care of Millennium odditys */ | ||
258 | static void DoC_WriteBuf(struct DiskOnChip *doc, const u_char * buf, int len) | ||
259 | { | ||
260 | void __iomem *docptr = doc->virtadr; | ||
261 | int i; | ||
262 | |||
263 | if (len <= 0) | ||
264 | return; | ||
265 | |||
266 | for (i = 0; i < len; i++) | ||
267 | WriteDOC_(buf[i], docptr, doc->ioreg + i); | ||
268 | |||
269 | if (DoC_is_Millennium(doc)) { | ||
270 | WriteDOC(0x00, docptr, WritePipeTerm); | ||
271 | } | ||
272 | } | ||
273 | |||
274 | |||
275 | /* DoC_SelectChip: Select a given flash chip within the current floor */ | ||
276 | |||
277 | static inline int DoC_SelectChip(struct DiskOnChip *doc, int chip) | ||
278 | { | ||
279 | void __iomem *docptr = doc->virtadr; | ||
280 | |||
281 | /* Software requirement 11.4.4 before writing DeviceSelect */ | ||
282 | /* Deassert the CE line to eliminate glitches on the FCE# outputs */ | ||
283 | WriteDOC(CDSN_CTRL_WP, docptr, CDSNControl); | ||
284 | DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ | ||
285 | |||
286 | /* Select the individual flash chip requested */ | ||
287 | WriteDOC(chip, docptr, CDSNDeviceSelect); | ||
288 | DoC_Delay(doc, 4); | ||
289 | |||
290 | /* Reassert the CE line */ | ||
291 | WriteDOC(CDSN_CTRL_CE | CDSN_CTRL_FLASH_IO | CDSN_CTRL_WP, docptr, | ||
292 | CDSNControl); | ||
293 | DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ | ||
294 | |||
295 | /* Wait for it to be ready */ | ||
296 | return DoC_WaitReady(doc); | ||
297 | } | ||
298 | |||
299 | /* DoC_SelectFloor: Select a given floor (bank of flash chips) */ | ||
300 | |||
301 | static inline int DoC_SelectFloor(struct DiskOnChip *doc, int floor) | ||
302 | { | ||
303 | void __iomem *docptr = doc->virtadr; | ||
304 | |||
305 | /* Select the floor (bank) of chips required */ | ||
306 | WriteDOC(floor, docptr, FloorSelect); | ||
307 | |||
308 | /* Wait for the chip to be ready */ | ||
309 | return DoC_WaitReady(doc); | ||
310 | } | ||
311 | |||
312 | /* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */ | ||
313 | |||
314 | static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip) | ||
315 | { | ||
316 | int mfr, id, i, j; | ||
317 | volatile char dummy; | ||
318 | |||
319 | /* Page in the required floor/chip */ | ||
320 | DoC_SelectFloor(doc, floor); | ||
321 | DoC_SelectChip(doc, chip); | ||
322 | |||
323 | /* Reset the chip */ | ||
324 | if (DoC_Command(doc, NAND_CMD_RESET, CDSN_CTRL_WP)) { | ||
325 | pr_debug("DoC_Command (reset) for %d,%d returned true\n", | ||
326 | floor, chip); | ||
327 | return 0; | ||
328 | } | ||
329 | |||
330 | |||
331 | /* Read the NAND chip ID: 1. Send ReadID command */ | ||
332 | if (DoC_Command(doc, NAND_CMD_READID, CDSN_CTRL_WP)) { | ||
333 | pr_debug("DoC_Command (ReadID) for %d,%d returned true\n", | ||
334 | floor, chip); | ||
335 | return 0; | ||
336 | } | ||
337 | |||
338 | /* Read the NAND chip ID: 2. Send address byte zero */ | ||
339 | DoC_Address(doc, ADDR_COLUMN, 0, CDSN_CTRL_WP, 0); | ||
340 | |||
341 | /* Read the manufacturer and device id codes from the device */ | ||
342 | |||
343 | if (DoC_is_Millennium(doc)) { | ||
344 | DoC_Delay(doc, 2); | ||
345 | dummy = ReadDOC(doc->virtadr, ReadPipeInit); | ||
346 | mfr = ReadDOC(doc->virtadr, LastDataRead); | ||
347 | |||
348 | DoC_Delay(doc, 2); | ||
349 | dummy = ReadDOC(doc->virtadr, ReadPipeInit); | ||
350 | id = ReadDOC(doc->virtadr, LastDataRead); | ||
351 | } else { | ||
352 | /* CDSN Slow IO register see Software Req 11.4 item 5. */ | ||
353 | dummy = ReadDOC(doc->virtadr, CDSNSlowIO); | ||
354 | DoC_Delay(doc, 2); | ||
355 | mfr = ReadDOC_(doc->virtadr, doc->ioreg); | ||
356 | |||
357 | /* CDSN Slow IO register see Software Req 11.4 item 5. */ | ||
358 | dummy = ReadDOC(doc->virtadr, CDSNSlowIO); | ||
359 | DoC_Delay(doc, 2); | ||
360 | id = ReadDOC_(doc->virtadr, doc->ioreg); | ||
361 | } | ||
362 | |||
363 | /* No response - return failure */ | ||
364 | if (mfr == 0xff || mfr == 0) | ||
365 | return 0; | ||
366 | |||
367 | /* Check it's the same as the first chip we identified. | ||
368 | * M-Systems say that any given DiskOnChip device should only | ||
369 | * contain _one_ type of flash part, although that's not a | ||
370 | * hardware restriction. */ | ||
371 | if (doc->mfr) { | ||
372 | if (doc->mfr == mfr && doc->id == id) | ||
373 | return 1; /* This is the same as the first */ | ||
374 | else | ||
375 | printk(KERN_WARNING | ||
376 | "Flash chip at floor %d, chip %d is different:\n", | ||
377 | floor, chip); | ||
378 | } | ||
379 | |||
380 | /* Print and store the manufacturer and ID codes. */ | ||
381 | for (i = 0; nand_flash_ids[i].name != NULL; i++) { | ||
382 | if (id == nand_flash_ids[i].dev_id) { | ||
383 | /* Try to identify manufacturer */ | ||
384 | for (j = 0; nand_manuf_ids[j].id != 0x0; j++) { | ||
385 | if (nand_manuf_ids[j].id == mfr) | ||
386 | break; | ||
387 | } | ||
388 | printk(KERN_INFO | ||
389 | "Flash chip found: Manufacturer ID: %2.2X, " | ||
390 | "Chip ID: %2.2X (%s:%s)\n", mfr, id, | ||
391 | nand_manuf_ids[j].name, nand_flash_ids[i].name); | ||
392 | if (!doc->mfr) { | ||
393 | doc->mfr = mfr; | ||
394 | doc->id = id; | ||
395 | doc->chipshift = | ||
396 | ffs((nand_flash_ids[i].chipsize << 20)) - 1; | ||
397 | doc->page256 = (nand_flash_ids[i].pagesize == 256) ? 1 : 0; | ||
398 | doc->pageadrlen = doc->chipshift > 25 ? 3 : 2; | ||
399 | doc->erasesize = | ||
400 | nand_flash_ids[i].erasesize; | ||
401 | return 1; | ||
402 | } | ||
403 | return 0; | ||
404 | } | ||
405 | } | ||
406 | |||
407 | |||
408 | /* We haven't fully identified the chip. Print as much as we know. */ | ||
409 | printk(KERN_WARNING "Unknown flash chip found: %2.2X %2.2X\n", | ||
410 | id, mfr); | ||
411 | |||
412 | printk(KERN_WARNING "Please report to dwmw2@infradead.org\n"); | ||
413 | return 0; | ||
414 | } | ||
415 | |||
416 | /* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */ | ||
417 | |||
418 | static void DoC_ScanChips(struct DiskOnChip *this, int maxchips) | ||
419 | { | ||
420 | int floor, chip; | ||
421 | int numchips[MAX_FLOORS]; | ||
422 | int ret = 1; | ||
423 | |||
424 | this->numchips = 0; | ||
425 | this->mfr = 0; | ||
426 | this->id = 0; | ||
427 | |||
428 | /* For each floor, find the number of valid chips it contains */ | ||
429 | for (floor = 0; floor < MAX_FLOORS; floor++) { | ||
430 | ret = 1; | ||
431 | numchips[floor] = 0; | ||
432 | for (chip = 0; chip < maxchips && ret != 0; chip++) { | ||
433 | |||
434 | ret = DoC_IdentChip(this, floor, chip); | ||
435 | if (ret) { | ||
436 | numchips[floor]++; | ||
437 | this->numchips++; | ||
438 | } | ||
439 | } | ||
440 | } | ||
441 | |||
442 | /* If there are none at all that we recognise, bail */ | ||
443 | if (!this->numchips) { | ||
444 | printk(KERN_NOTICE "No flash chips recognised.\n"); | ||
445 | return; | ||
446 | } | ||
447 | |||
448 | /* Allocate an array to hold the information for each chip */ | ||
449 | this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL); | ||
450 | if (!this->chips) { | ||
451 | printk(KERN_NOTICE "No memory for allocating chip info structures\n"); | ||
452 | return; | ||
453 | } | ||
454 | |||
455 | ret = 0; | ||
456 | |||
457 | /* Fill out the chip array with {floor, chipno} for each | ||
458 | * detected chip in the device. */ | ||
459 | for (floor = 0; floor < MAX_FLOORS; floor++) { | ||
460 | for (chip = 0; chip < numchips[floor]; chip++) { | ||
461 | this->chips[ret].floor = floor; | ||
462 | this->chips[ret].chip = chip; | ||
463 | this->chips[ret].curadr = 0; | ||
464 | this->chips[ret].curmode = 0x50; | ||
465 | ret++; | ||
466 | } | ||
467 | } | ||
468 | |||
469 | /* Calculate and print the total size of the device */ | ||
470 | this->totlen = this->numchips * (1 << this->chipshift); | ||
471 | |||
472 | printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n", | ||
473 | this->numchips, this->totlen >> 20); | ||
474 | } | ||
475 | |||
476 | static int DoC2k_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2) | ||
477 | { | ||
478 | int tmp1, tmp2, retval; | ||
479 | if (doc1->physadr == doc2->physadr) | ||
480 | return 1; | ||
481 | |||
482 | /* Use the alias resolution register which was set aside for this | ||
483 | * purpose. If it's value is the same on both chips, they might | ||
484 | * be the same chip, and we write to one and check for a change in | ||
485 | * the other. It's unclear if this register is usuable in the | ||
486 | * DoC 2000 (it's in the Millennium docs), but it seems to work. */ | ||
487 | tmp1 = ReadDOC(doc1->virtadr, AliasResolution); | ||
488 | tmp2 = ReadDOC(doc2->virtadr, AliasResolution); | ||
489 | if (tmp1 != tmp2) | ||
490 | return 0; | ||
491 | |||
492 | WriteDOC((tmp1 + 1) % 0xff, doc1->virtadr, AliasResolution); | ||
493 | tmp2 = ReadDOC(doc2->virtadr, AliasResolution); | ||
494 | if (tmp2 == (tmp1 + 1) % 0xff) | ||
495 | retval = 1; | ||
496 | else | ||
497 | retval = 0; | ||
498 | |||
499 | /* Restore register contents. May not be necessary, but do it just to | ||
500 | * be safe. */ | ||
501 | WriteDOC(tmp1, doc1->virtadr, AliasResolution); | ||
502 | |||
503 | return retval; | ||
504 | } | ||
505 | |||
506 | /* This routine is found from the docprobe code by symbol_get(), | ||
507 | * which will bump the use count of this module. */ | ||
508 | void DoC2k_init(struct mtd_info *mtd) | ||
509 | { | ||
510 | struct DiskOnChip *this = mtd->priv; | ||
511 | struct DiskOnChip *old = NULL; | ||
512 | int maxchips; | ||
513 | |||
514 | /* We must avoid being called twice for the same device. */ | ||
515 | |||
516 | if (doc2klist) | ||
517 | old = doc2klist->priv; | ||
518 | |||
519 | while (old) { | ||
520 | if (DoC2k_is_alias(old, this)) { | ||
521 | printk(KERN_NOTICE | ||
522 | "Ignoring DiskOnChip 2000 at 0x%lX - already configured\n", | ||
523 | this->physadr); | ||
524 | iounmap(this->virtadr); | ||
525 | kfree(mtd); | ||
526 | return; | ||
527 | } | ||
528 | if (old->nextdoc) | ||
529 | old = old->nextdoc->priv; | ||
530 | else | ||
531 | old = NULL; | ||
532 | } | ||
533 | |||
534 | |||
535 | switch (this->ChipID) { | ||
536 | case DOC_ChipID_Doc2kTSOP: | ||
537 | mtd->name = "DiskOnChip 2000 TSOP"; | ||
538 | this->ioreg = DoC_Mil_CDSN_IO; | ||
539 | /* Pretend it's a Millennium */ | ||
540 | this->ChipID = DOC_ChipID_DocMil; | ||
541 | maxchips = MAX_CHIPS; | ||
542 | break; | ||
543 | case DOC_ChipID_Doc2k: | ||
544 | mtd->name = "DiskOnChip 2000"; | ||
545 | this->ioreg = DoC_2k_CDSN_IO; | ||
546 | maxchips = MAX_CHIPS; | ||
547 | break; | ||
548 | case DOC_ChipID_DocMil: | ||
549 | mtd->name = "DiskOnChip Millennium"; | ||
550 | this->ioreg = DoC_Mil_CDSN_IO; | ||
551 | maxchips = MAX_CHIPS_MIL; | ||
552 | break; | ||
553 | default: | ||
554 | printk("Unknown ChipID 0x%02x\n", this->ChipID); | ||
555 | kfree(mtd); | ||
556 | iounmap(this->virtadr); | ||
557 | return; | ||
558 | } | ||
559 | |||
560 | printk(KERN_NOTICE "%s found at address 0x%lX\n", mtd->name, | ||
561 | this->physadr); | ||
562 | |||
563 | mtd->type = MTD_NANDFLASH; | ||
564 | mtd->flags = MTD_CAP_NANDFLASH; | ||
565 | mtd->writebufsize = mtd->writesize = 512; | ||
566 | mtd->oobsize = 16; | ||
567 | mtd->ecc_strength = 2; | ||
568 | mtd->owner = THIS_MODULE; | ||
569 | mtd->_erase = doc_erase; | ||
570 | mtd->_read = doc_read; | ||
571 | mtd->_write = doc_write; | ||
572 | mtd->_read_oob = doc_read_oob; | ||
573 | mtd->_write_oob = doc_write_oob; | ||
574 | this->curfloor = -1; | ||
575 | this->curchip = -1; | ||
576 | mutex_init(&this->lock); | ||
577 | |||
578 | /* Ident all the chips present. */ | ||
579 | DoC_ScanChips(this, maxchips); | ||
580 | |||
581 | if (!this->totlen) { | ||
582 | kfree(mtd); | ||
583 | iounmap(this->virtadr); | ||
584 | } else { | ||
585 | this->nextdoc = doc2klist; | ||
586 | doc2klist = mtd; | ||
587 | mtd->size = this->totlen; | ||
588 | mtd->erasesize = this->erasesize; | ||
589 | mtd_device_register(mtd, NULL, 0); | ||
590 | return; | ||
591 | } | ||
592 | } | ||
593 | EXPORT_SYMBOL_GPL(DoC2k_init); | ||
594 | |||
595 | static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, | ||
596 | size_t * retlen, u_char * buf) | ||
597 | { | ||
598 | struct DiskOnChip *this = mtd->priv; | ||
599 | void __iomem *docptr = this->virtadr; | ||
600 | struct Nand *mychip; | ||
601 | unsigned char syndrome[6], eccbuf[6]; | ||
602 | volatile char dummy; | ||
603 | int i, len256 = 0, ret=0; | ||
604 | size_t left = len; | ||
605 | |||
606 | mutex_lock(&this->lock); | ||
607 | while (left) { | ||
608 | len = left; | ||
609 | |||
610 | /* Don't allow a single read to cross a 512-byte block boundary */ | ||
611 | if (from + len > ((from | 0x1ff) + 1)) | ||
612 | len = ((from | 0x1ff) + 1) - from; | ||
613 | |||
614 | /* The ECC will not be calculated correctly if less than 512 is read */ | ||
615 | if (len != 0x200) | ||
616 | printk(KERN_WARNING | ||
617 | "ECC needs a full sector read (adr: %lx size %lx)\n", | ||
618 | (long) from, (long) len); | ||
619 | |||
620 | /* printk("DoC_Read (adr: %lx size %lx)\n", (long) from, (long) len); */ | ||
621 | |||
622 | |||
623 | /* Find the chip which is to be used and select it */ | ||
624 | mychip = &this->chips[from >> (this->chipshift)]; | ||
625 | |||
626 | if (this->curfloor != mychip->floor) { | ||
627 | DoC_SelectFloor(this, mychip->floor); | ||
628 | DoC_SelectChip(this, mychip->chip); | ||
629 | } else if (this->curchip != mychip->chip) { | ||
630 | DoC_SelectChip(this, mychip->chip); | ||
631 | } | ||
632 | |||
633 | this->curfloor = mychip->floor; | ||
634 | this->curchip = mychip->chip; | ||
635 | |||
636 | DoC_Command(this, | ||
637 | (!this->page256 | ||
638 | && (from & 0x100)) ? NAND_CMD_READ1 : NAND_CMD_READ0, | ||
639 | CDSN_CTRL_WP); | ||
640 | DoC_Address(this, ADDR_COLUMN_PAGE, from, CDSN_CTRL_WP, | ||
641 | CDSN_CTRL_ECC_IO); | ||
642 | |||
643 | /* Prime the ECC engine */ | ||
644 | WriteDOC(DOC_ECC_RESET, docptr, ECCConf); | ||
645 | WriteDOC(DOC_ECC_EN, docptr, ECCConf); | ||
646 | |||
647 | /* treat crossing 256-byte sector for 2M x 8bits devices */ | ||
648 | if (this->page256 && from + len > (from | 0xff) + 1) { | ||
649 | len256 = (from | 0xff) + 1 - from; | ||
650 | DoC_ReadBuf(this, buf, len256); | ||
651 | |||
652 | DoC_Command(this, NAND_CMD_READ0, CDSN_CTRL_WP); | ||
653 | DoC_Address(this, ADDR_COLUMN_PAGE, from + len256, | ||
654 | CDSN_CTRL_WP, CDSN_CTRL_ECC_IO); | ||
655 | } | ||
656 | |||
657 | DoC_ReadBuf(this, &buf[len256], len - len256); | ||
658 | |||
659 | /* Let the caller know we completed it */ | ||
660 | *retlen += len; | ||
661 | |||
662 | /* Read the ECC data through the DiskOnChip ECC logic */ | ||
663 | /* Note: this will work even with 2M x 8bit devices as */ | ||
664 | /* they have 8 bytes of OOB per 256 page. mf. */ | ||
665 | DoC_ReadBuf(this, eccbuf, 6); | ||
666 | |||
667 | /* Flush the pipeline */ | ||
668 | if (DoC_is_Millennium(this)) { | ||
669 | dummy = ReadDOC(docptr, ECCConf); | ||
670 | dummy = ReadDOC(docptr, ECCConf); | ||
671 | i = ReadDOC(docptr, ECCConf); | ||
672 | } else { | ||
673 | dummy = ReadDOC(docptr, 2k_ECCStatus); | ||
674 | dummy = ReadDOC(docptr, 2k_ECCStatus); | ||
675 | i = ReadDOC(docptr, 2k_ECCStatus); | ||
676 | } | ||
677 | |||
678 | /* Check the ECC Status */ | ||
679 | if (i & 0x80) { | ||
680 | int nb_errors; | ||
681 | /* There was an ECC error */ | ||
682 | #ifdef ECC_DEBUG | ||
683 | printk(KERN_ERR "DiskOnChip ECC Error: Read at %lx\n", (long)from); | ||
684 | #endif | ||
685 | /* Read the ECC syndrome through the DiskOnChip ECC | ||
686 | logic. These syndrome will be all ZERO when there | ||
687 | is no error */ | ||
688 | for (i = 0; i < 6; i++) { | ||
689 | syndrome[i] = | ||
690 | ReadDOC(docptr, ECCSyndrome0 + i); | ||
691 | } | ||
692 | nb_errors = doc_decode_ecc(buf, syndrome); | ||
693 | |||
694 | #ifdef ECC_DEBUG | ||
695 | printk(KERN_ERR "Errors corrected: %x\n", nb_errors); | ||
696 | #endif | ||
697 | if (nb_errors < 0) { | ||
698 | /* We return error, but have actually done the | ||
699 | read. Not that this can be told to | ||
700 | user-space, via sys_read(), but at least | ||
701 | MTD-aware stuff can know about it by | ||
702 | checking *retlen */ | ||
703 | ret = -EIO; | ||
704 | } | ||
705 | } | ||
706 | |||
707 | #ifdef PSYCHO_DEBUG | ||
708 | printk(KERN_DEBUG "ECC DATA at %lxB: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", | ||
709 | (long)from, eccbuf[0], eccbuf[1], eccbuf[2], | ||
710 | eccbuf[3], eccbuf[4], eccbuf[5]); | ||
711 | #endif | ||
712 | |||
713 | /* disable the ECC engine */ | ||
714 | WriteDOC(DOC_ECC_DIS, docptr , ECCConf); | ||
715 | |||
716 | /* according to 11.4.1, we need to wait for the busy line | ||
717 | * drop if we read to the end of the page. */ | ||
718 | if(0 == ((from + len) & 0x1ff)) | ||
719 | { | ||
720 | DoC_WaitReady(this); | ||
721 | } | ||
722 | |||
723 | from += len; | ||
724 | left -= len; | ||
725 | buf += len; | ||
726 | } | ||
727 | |||
728 | mutex_unlock(&this->lock); | ||
729 | |||
730 | return ret; | ||
731 | } | ||
732 | |||
733 | static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, | ||
734 | size_t * retlen, const u_char * buf) | ||
735 | { | ||
736 | struct DiskOnChip *this = mtd->priv; | ||
737 | int di; /* Yes, DI is a hangover from when I was disassembling the binary driver */ | ||
738 | void __iomem *docptr = this->virtadr; | ||
739 | unsigned char eccbuf[6]; | ||
740 | volatile char dummy; | ||
741 | int len256 = 0; | ||
742 | struct Nand *mychip; | ||
743 | size_t left = len; | ||
744 | int status; | ||
745 | |||
746 | mutex_lock(&this->lock); | ||
747 | while (left) { | ||
748 | len = left; | ||
749 | |||
750 | /* Don't allow a single write to cross a 512-byte block boundary */ | ||
751 | if (to + len > ((to | 0x1ff) + 1)) | ||
752 | len = ((to | 0x1ff) + 1) - to; | ||
753 | |||
754 | /* The ECC will not be calculated correctly if less than 512 is written */ | ||
755 | /* DBB- | ||
756 | if (len != 0x200 && eccbuf) | ||
757 | printk(KERN_WARNING | ||
758 | "ECC needs a full sector write (adr: %lx size %lx)\n", | ||
759 | (long) to, (long) len); | ||
760 | -DBB */ | ||
761 | |||
762 | /* printk("DoC_Write (adr: %lx size %lx)\n", (long) to, (long) len); */ | ||
763 | |||
764 | /* Find the chip which is to be used and select it */ | ||
765 | mychip = &this->chips[to >> (this->chipshift)]; | ||
766 | |||
767 | if (this->curfloor != mychip->floor) { | ||
768 | DoC_SelectFloor(this, mychip->floor); | ||
769 | DoC_SelectChip(this, mychip->chip); | ||
770 | } else if (this->curchip != mychip->chip) { | ||
771 | DoC_SelectChip(this, mychip->chip); | ||
772 | } | ||
773 | |||
774 | this->curfloor = mychip->floor; | ||
775 | this->curchip = mychip->chip; | ||
776 | |||
777 | /* Set device to main plane of flash */ | ||
778 | DoC_Command(this, NAND_CMD_RESET, CDSN_CTRL_WP); | ||
779 | DoC_Command(this, | ||
780 | (!this->page256 | ||
781 | && (to & 0x100)) ? NAND_CMD_READ1 : NAND_CMD_READ0, | ||
782 | CDSN_CTRL_WP); | ||
783 | |||
784 | DoC_Command(this, NAND_CMD_SEQIN, 0); | ||
785 | DoC_Address(this, ADDR_COLUMN_PAGE, to, 0, CDSN_CTRL_ECC_IO); | ||
786 | |||
787 | /* Prime the ECC engine */ | ||
788 | WriteDOC(DOC_ECC_RESET, docptr, ECCConf); | ||
789 | WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf); | ||
790 | |||
791 | /* treat crossing 256-byte sector for 2M x 8bits devices */ | ||
792 | if (this->page256 && to + len > (to | 0xff) + 1) { | ||
793 | len256 = (to | 0xff) + 1 - to; | ||
794 | DoC_WriteBuf(this, buf, len256); | ||
795 | |||
796 | DoC_Command(this, NAND_CMD_PAGEPROG, 0); | ||
797 | |||
798 | DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP); | ||
799 | /* There's an implicit DoC_WaitReady() in DoC_Command */ | ||
800 | |||
801 | dummy = ReadDOC(docptr, CDSNSlowIO); | ||
802 | DoC_Delay(this, 2); | ||
803 | |||
804 | if (ReadDOC_(docptr, this->ioreg) & 1) { | ||
805 | printk(KERN_ERR "Error programming flash\n"); | ||
806 | /* Error in programming */ | ||
807 | *retlen = 0; | ||
808 | mutex_unlock(&this->lock); | ||
809 | return -EIO; | ||
810 | } | ||
811 | |||
812 | DoC_Command(this, NAND_CMD_SEQIN, 0); | ||
813 | DoC_Address(this, ADDR_COLUMN_PAGE, to + len256, 0, | ||
814 | CDSN_CTRL_ECC_IO); | ||
815 | } | ||
816 | |||
817 | DoC_WriteBuf(this, &buf[len256], len - len256); | ||
818 | |||
819 | WriteDOC(CDSN_CTRL_ECC_IO | CDSN_CTRL_CE, docptr, CDSNControl); | ||
820 | |||
821 | if (DoC_is_Millennium(this)) { | ||
822 | WriteDOC(0, docptr, NOP); | ||
823 | WriteDOC(0, docptr, NOP); | ||
824 | WriteDOC(0, docptr, NOP); | ||
825 | } else { | ||
826 | WriteDOC_(0, docptr, this->ioreg); | ||
827 | WriteDOC_(0, docptr, this->ioreg); | ||
828 | WriteDOC_(0, docptr, this->ioreg); | ||
829 | } | ||
830 | |||
831 | WriteDOC(CDSN_CTRL_ECC_IO | CDSN_CTRL_FLASH_IO | CDSN_CTRL_CE, docptr, | ||
832 | CDSNControl); | ||
833 | |||
834 | /* Read the ECC data through the DiskOnChip ECC logic */ | ||
835 | for (di = 0; di < 6; di++) { | ||
836 | eccbuf[di] = ReadDOC(docptr, ECCSyndrome0 + di); | ||
837 | } | ||
838 | |||
839 | /* Reset the ECC engine */ | ||
840 | WriteDOC(DOC_ECC_DIS, docptr, ECCConf); | ||
841 | |||
842 | #ifdef PSYCHO_DEBUG | ||
843 | printk | ||
844 | ("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", | ||
845 | (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3], | ||
846 | eccbuf[4], eccbuf[5]); | ||
847 | #endif | ||
848 | DoC_Command(this, NAND_CMD_PAGEPROG, 0); | ||
849 | |||
850 | DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP); | ||
851 | /* There's an implicit DoC_WaitReady() in DoC_Command */ | ||
852 | |||
853 | if (DoC_is_Millennium(this)) { | ||
854 | ReadDOC(docptr, ReadPipeInit); | ||
855 | status = ReadDOC(docptr, LastDataRead); | ||
856 | } else { | ||
857 | dummy = ReadDOC(docptr, CDSNSlowIO); | ||
858 | DoC_Delay(this, 2); | ||
859 | status = ReadDOC_(docptr, this->ioreg); | ||
860 | } | ||
861 | |||
862 | if (status & 1) { | ||
863 | printk(KERN_ERR "Error programming flash\n"); | ||
864 | /* Error in programming */ | ||
865 | *retlen = 0; | ||
866 | mutex_unlock(&this->lock); | ||
867 | return -EIO; | ||
868 | } | ||
869 | |||
870 | /* Let the caller know we completed it */ | ||
871 | *retlen += len; | ||
872 | |||
873 | { | ||
874 | unsigned char x[8]; | ||
875 | size_t dummy; | ||
876 | int ret; | ||
877 | |||
878 | /* Write the ECC data to flash */ | ||
879 | for (di=0; di<6; di++) | ||
880 | x[di] = eccbuf[di]; | ||
881 | |||
882 | x[6]=0x55; | ||
883 | x[7]=0x55; | ||
884 | |||
885 | ret = doc_write_oob_nolock(mtd, to, 8, &dummy, x); | ||
886 | if (ret) { | ||
887 | mutex_unlock(&this->lock); | ||
888 | return ret; | ||
889 | } | ||
890 | } | ||
891 | |||
892 | to += len; | ||
893 | left -= len; | ||
894 | buf += len; | ||
895 | } | ||
896 | |||
897 | mutex_unlock(&this->lock); | ||
898 | return 0; | ||
899 | } | ||
900 | |||
901 | static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, | ||
902 | struct mtd_oob_ops *ops) | ||
903 | { | ||
904 | struct DiskOnChip *this = mtd->priv; | ||
905 | int len256 = 0, ret; | ||
906 | struct Nand *mychip; | ||
907 | uint8_t *buf = ops->oobbuf; | ||
908 | size_t len = ops->len; | ||
909 | |||
910 | BUG_ON(ops->mode != MTD_OPS_PLACE_OOB); | ||
911 | |||
912 | ofs += ops->ooboffs; | ||
913 | |||
914 | mutex_lock(&this->lock); | ||
915 | |||
916 | mychip = &this->chips[ofs >> this->chipshift]; | ||
917 | |||
918 | if (this->curfloor != mychip->floor) { | ||
919 | DoC_SelectFloor(this, mychip->floor); | ||
920 | DoC_SelectChip(this, mychip->chip); | ||
921 | } else if (this->curchip != mychip->chip) { | ||
922 | DoC_SelectChip(this, mychip->chip); | ||
923 | } | ||
924 | this->curfloor = mychip->floor; | ||
925 | this->curchip = mychip->chip; | ||
926 | |||
927 | /* update address for 2M x 8bit devices. OOB starts on the second */ | ||
928 | /* page to maintain compatibility with doc_read_ecc. */ | ||
929 | if (this->page256) { | ||
930 | if (!(ofs & 0x8)) | ||
931 | ofs += 0x100; | ||
932 | else | ||
933 | ofs -= 0x8; | ||
934 | } | ||
935 | |||
936 | DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP); | ||
937 | DoC_Address(this, ADDR_COLUMN_PAGE, ofs, CDSN_CTRL_WP, 0); | ||
938 | |||
939 | /* treat crossing 8-byte OOB data for 2M x 8bit devices */ | ||
940 | /* Note: datasheet says it should automaticaly wrap to the */ | ||
941 | /* next OOB block, but it didn't work here. mf. */ | ||
942 | if (this->page256 && ofs + len > (ofs | 0x7) + 1) { | ||
943 | len256 = (ofs | 0x7) + 1 - ofs; | ||
944 | DoC_ReadBuf(this, buf, len256); | ||
945 | |||
946 | DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP); | ||
947 | DoC_Address(this, ADDR_COLUMN_PAGE, ofs & (~0x1ff), | ||
948 | CDSN_CTRL_WP, 0); | ||
949 | } | ||
950 | |||
951 | DoC_ReadBuf(this, &buf[len256], len - len256); | ||
952 | |||
953 | ops->retlen = len; | ||
954 | /* Reading the full OOB data drops us off of the end of the page, | ||
955 | * causing the flash device to go into busy mode, so we need | ||
956 | * to wait until ready 11.4.1 and Toshiba TC58256FT docs */ | ||
957 | |||
958 | ret = DoC_WaitReady(this); | ||
959 | |||
960 | mutex_unlock(&this->lock); | ||
961 | return ret; | ||
962 | |||
963 | } | ||
964 | |||
965 | static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len, | ||
966 | size_t * retlen, const u_char * buf) | ||
967 | { | ||
968 | struct DiskOnChip *this = mtd->priv; | ||
969 | int len256 = 0; | ||
970 | void __iomem *docptr = this->virtadr; | ||
971 | struct Nand *mychip = &this->chips[ofs >> this->chipshift]; | ||
972 | volatile int dummy; | ||
973 | int status; | ||
974 | |||
975 | // printk("doc_write_oob(%lx, %d): %2.2X %2.2X %2.2X %2.2X ... %2.2X %2.2X .. %2.2X %2.2X\n",(long)ofs, len, | ||
976 | // buf[0], buf[1], buf[2], buf[3], buf[8], buf[9], buf[14],buf[15]); | ||
977 | |||
978 | /* Find the chip which is to be used and select it */ | ||
979 | if (this->curfloor != mychip->floor) { | ||
980 | DoC_SelectFloor(this, mychip->floor); | ||
981 | DoC_SelectChip(this, mychip->chip); | ||
982 | } else if (this->curchip != mychip->chip) { | ||
983 | DoC_SelectChip(this, mychip->chip); | ||
984 | } | ||
985 | this->curfloor = mychip->floor; | ||
986 | this->curchip = mychip->chip; | ||
987 | |||
988 | /* disable the ECC engine */ | ||
989 | WriteDOC (DOC_ECC_RESET, docptr, ECCConf); | ||
990 | WriteDOC (DOC_ECC_DIS, docptr, ECCConf); | ||
991 | |||
992 | /* Reset the chip, see Software Requirement 11.4 item 1. */ | ||
993 | DoC_Command(this, NAND_CMD_RESET, CDSN_CTRL_WP); | ||
994 | |||
995 | /* issue the Read2 command to set the pointer to the Spare Data Area. */ | ||
996 | DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP); | ||
997 | |||
998 | /* update address for 2M x 8bit devices. OOB starts on the second */ | ||
999 | /* page to maintain compatibility with doc_read_ecc. */ | ||
1000 | if (this->page256) { | ||
1001 | if (!(ofs & 0x8)) | ||
1002 | ofs += 0x100; | ||
1003 | else | ||
1004 | ofs -= 0x8; | ||
1005 | } | ||
1006 | |||
1007 | /* issue the Serial Data In command to initial the Page Program process */ | ||
1008 | DoC_Command(this, NAND_CMD_SEQIN, 0); | ||
1009 | DoC_Address(this, ADDR_COLUMN_PAGE, ofs, 0, 0); | ||
1010 | |||
1011 | /* treat crossing 8-byte OOB data for 2M x 8bit devices */ | ||
1012 | /* Note: datasheet says it should automaticaly wrap to the */ | ||
1013 | /* next OOB block, but it didn't work here. mf. */ | ||
1014 | if (this->page256 && ofs + len > (ofs | 0x7) + 1) { | ||
1015 | len256 = (ofs | 0x7) + 1 - ofs; | ||
1016 | DoC_WriteBuf(this, buf, len256); | ||
1017 | |||
1018 | DoC_Command(this, NAND_CMD_PAGEPROG, 0); | ||
1019 | DoC_Command(this, NAND_CMD_STATUS, 0); | ||
1020 | /* DoC_WaitReady() is implicit in DoC_Command */ | ||
1021 | |||
1022 | if (DoC_is_Millennium(this)) { | ||
1023 | ReadDOC(docptr, ReadPipeInit); | ||
1024 | status = ReadDOC(docptr, LastDataRead); | ||
1025 | } else { | ||
1026 | dummy = ReadDOC(docptr, CDSNSlowIO); | ||
1027 | DoC_Delay(this, 2); | ||
1028 | status = ReadDOC_(docptr, this->ioreg); | ||
1029 | } | ||
1030 | |||
1031 | if (status & 1) { | ||
1032 | printk(KERN_ERR "Error programming oob data\n"); | ||
1033 | /* There was an error */ | ||
1034 | *retlen = 0; | ||
1035 | return -EIO; | ||
1036 | } | ||
1037 | DoC_Command(this, NAND_CMD_SEQIN, 0); | ||
1038 | DoC_Address(this, ADDR_COLUMN_PAGE, ofs & (~0x1ff), 0, 0); | ||
1039 | } | ||
1040 | |||
1041 | DoC_WriteBuf(this, &buf[len256], len - len256); | ||
1042 | |||
1043 | DoC_Command(this, NAND_CMD_PAGEPROG, 0); | ||
1044 | DoC_Command(this, NAND_CMD_STATUS, 0); | ||
1045 | /* DoC_WaitReady() is implicit in DoC_Command */ | ||
1046 | |||
1047 | if (DoC_is_Millennium(this)) { | ||
1048 | ReadDOC(docptr, ReadPipeInit); | ||
1049 | status = ReadDOC(docptr, LastDataRead); | ||
1050 | } else { | ||
1051 | dummy = ReadDOC(docptr, CDSNSlowIO); | ||
1052 | DoC_Delay(this, 2); | ||
1053 | status = ReadDOC_(docptr, this->ioreg); | ||
1054 | } | ||
1055 | |||
1056 | if (status & 1) { | ||
1057 | printk(KERN_ERR "Error programming oob data\n"); | ||
1058 | /* There was an error */ | ||
1059 | *retlen = 0; | ||
1060 | return -EIO; | ||
1061 | } | ||
1062 | |||
1063 | *retlen = len; | ||
1064 | return 0; | ||
1065 | |||
1066 | } | ||
1067 | |||
1068 | static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, | ||
1069 | struct mtd_oob_ops *ops) | ||
1070 | { | ||
1071 | struct DiskOnChip *this = mtd->priv; | ||
1072 | int ret; | ||
1073 | |||
1074 | BUG_ON(ops->mode != MTD_OPS_PLACE_OOB); | ||
1075 | |||
1076 | mutex_lock(&this->lock); | ||
1077 | ret = doc_write_oob_nolock(mtd, ofs + ops->ooboffs, ops->len, | ||
1078 | &ops->retlen, ops->oobbuf); | ||
1079 | |||
1080 | mutex_unlock(&this->lock); | ||
1081 | return ret; | ||
1082 | } | ||
1083 | |||
1084 | static int doc_erase(struct mtd_info *mtd, struct erase_info *instr) | ||
1085 | { | ||
1086 | struct DiskOnChip *this = mtd->priv; | ||
1087 | __u32 ofs = instr->addr; | ||
1088 | __u32 len = instr->len; | ||
1089 | volatile int dummy; | ||
1090 | void __iomem *docptr = this->virtadr; | ||
1091 | struct Nand *mychip; | ||
1092 | int status; | ||
1093 | |||
1094 | mutex_lock(&this->lock); | ||
1095 | |||
1096 | if (ofs & (mtd->erasesize-1) || len & (mtd->erasesize-1)) { | ||
1097 | mutex_unlock(&this->lock); | ||
1098 | return -EINVAL; | ||
1099 | } | ||
1100 | |||
1101 | instr->state = MTD_ERASING; | ||
1102 | |||
1103 | /* FIXME: Do this in the background. Use timers or schedule_task() */ | ||
1104 | while(len) { | ||
1105 | mychip = &this->chips[ofs >> this->chipshift]; | ||
1106 | |||
1107 | if (this->curfloor != mychip->floor) { | ||
1108 | DoC_SelectFloor(this, mychip->floor); | ||
1109 | DoC_SelectChip(this, mychip->chip); | ||
1110 | } else if (this->curchip != mychip->chip) { | ||
1111 | DoC_SelectChip(this, mychip->chip); | ||
1112 | } | ||
1113 | this->curfloor = mychip->floor; | ||
1114 | this->curchip = mychip->chip; | ||
1115 | |||
1116 | DoC_Command(this, NAND_CMD_ERASE1, 0); | ||
1117 | DoC_Address(this, ADDR_PAGE, ofs, 0, 0); | ||
1118 | DoC_Command(this, NAND_CMD_ERASE2, 0); | ||
1119 | |||
1120 | DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP); | ||
1121 | |||
1122 | if (DoC_is_Millennium(this)) { | ||
1123 | ReadDOC(docptr, ReadPipeInit); | ||
1124 | status = ReadDOC(docptr, LastDataRead); | ||
1125 | } else { | ||
1126 | dummy = ReadDOC(docptr, CDSNSlowIO); | ||
1127 | DoC_Delay(this, 2); | ||
1128 | status = ReadDOC_(docptr, this->ioreg); | ||
1129 | } | ||
1130 | |||
1131 | if (status & 1) { | ||
1132 | printk(KERN_ERR "Error erasing at 0x%x\n", ofs); | ||
1133 | /* There was an error */ | ||
1134 | instr->state = MTD_ERASE_FAILED; | ||
1135 | goto callback; | ||
1136 | } | ||
1137 | ofs += mtd->erasesize; | ||
1138 | len -= mtd->erasesize; | ||
1139 | } | ||
1140 | instr->state = MTD_ERASE_DONE; | ||
1141 | |||
1142 | callback: | ||
1143 | mtd_erase_callback(instr); | ||
1144 | |||
1145 | mutex_unlock(&this->lock); | ||
1146 | return 0; | ||
1147 | } | ||
1148 | |||
1149 | |||
1150 | /**************************************************************************** | ||
1151 | * | ||
1152 | * Module stuff | ||
1153 | * | ||
1154 | ****************************************************************************/ | ||
1155 | |||
1156 | static void __exit cleanup_doc2000(void) | ||
1157 | { | ||
1158 | struct mtd_info *mtd; | ||
1159 | struct DiskOnChip *this; | ||
1160 | |||
1161 | while ((mtd = doc2klist)) { | ||
1162 | this = mtd->priv; | ||
1163 | doc2klist = this->nextdoc; | ||
1164 | |||
1165 | mtd_device_unregister(mtd); | ||
1166 | |||
1167 | iounmap(this->virtadr); | ||
1168 | kfree(this->chips); | ||
1169 | kfree(mtd); | ||
1170 | } | ||
1171 | } | ||
1172 | |||
1173 | module_exit(cleanup_doc2000); | ||
1174 | |||
1175 | MODULE_LICENSE("GPL"); | ||
1176 | MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al."); | ||
1177 | MODULE_DESCRIPTION("MTD driver for DiskOnChip 2000 and Millennium"); | ||
1178 | |||