6 files changed, 64 insertions, 44 deletions

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 77f0b6b1681d..ff0f714b012c 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -62,7 +62,7 @@ struct idmac_desc {
 
         u32             des1;   /* Buffer sizes */
 #define IDMAC_SET_BUFFER1_SIZE(d, s) \
-        ((d)->des1 = ((d)->des1 & 0x03ffc000) | ((s) & 0x3fff))
+        ((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff))
 
         u32             des2;   /* buffer 1 physical address */
 
@@ -699,7 +699,7 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
         }
 
         /* DDR mode set */
-        if (ios->ddr) {
+        if (ios->timing == MMC_TIMING_UHS_DDR50) {
                 regs = mci_readl(slot->host, UHS_REG);
                 regs |= (0x1 << slot->id) << 16;
                 mci_writel(slot->host, UHS_REG, regs);
@@ -1646,7 +1646,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id)
                         mmc->caps |= MMC_CAP_4_BIT_DATA;
 
         if (host->pdata->quirks & DW_MCI_QUIRK_HIGHSPEED)
-                mmc->caps |= MMC_CAP_SD_HIGHSPEED;
+                mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
 
 #ifdef CONFIG_MMC_DW_IDMAC
         mmc->max_segs = host->ring_size;
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 9ebfb4b482f5..0e9780f5a4a9 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -27,6 +27,7 @@
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
 
+#define SDHCI_CTRL_D3CD                 0x08
 /* VENDOR SPEC register */
 #define SDHCI_VENDOR_SPEC               0xC0
 #define  SDHCI_VENDOR_SPEC_SDIO_QUIRK   0x00000002
@@ -141,13 +142,32 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
         struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
         struct pltfm_imx_data *imx_data = pltfm_host->priv;
         struct esdhc_platform_data *boarddata = &imx_data->boarddata;
-
-        if (unlikely((reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)
-                        && (boarddata->cd_type == ESDHC_CD_GPIO)))
-                /*
-                 * these interrupts won't work with a custom card_detect gpio
-                 */
-                val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
+        u32 data;
+
+        if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
+                if (boarddata->cd_type == ESDHC_CD_GPIO)
+                        /*
+                         * These interrupts won't work with a custom
+                         * card_detect gpio (only applied to mx25/35)
+                         */
+                        val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
+
+                if (val & SDHCI_INT_CARD_INT) {
+                        /*
+                         * Clear and then set D3CD bit to avoid missing the
+                         * card interrupt.  This is a eSDHC controller problem
+                         * so we need to apply the following workaround: clear
+                         * and set D3CD bit will make eSDHC re-sample the card
+                         * interrupt. In case a card interrupt was lost,
+                         * re-sample it by the following steps.
+                         */
+                        data = readl(host->ioaddr + SDHCI_HOST_CONTROL);
+                        data &= ~SDHCI_CTRL_D3CD;
+                        writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
+                        data |= SDHCI_CTRL_D3CD;
+                        writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
+                }
+        }
 
         if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
                                 && (reg == SDHCI_INT_STATUS)
@@ -217,8 +237,10 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
                  */
                 return;
         case SDHCI_HOST_CONTROL:
-                /* FSL messed up here, so we can just keep those two */
-                new_val = val & (SDHCI_CTRL_LED | SDHCI_CTRL_4BITBUS);
+                /* FSL messed up here, so we can just keep those three */
+                new_val = val & (SDHCI_CTRL_LED | \
+                                SDHCI_CTRL_4BITBUS | \
+                                SDHCI_CTRL_D3CD);
                 /* ensure the endianess */
                 new_val |= ESDHC_HOST_CONTROL_LE;
                 /* DMA mode bits are shifted */
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 4198dbbc5c20..fc7e4a515629 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -195,7 +195,8 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
         clk_enable(clk);
 
         host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
-                | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
+                | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
+                | SDHCI_QUIRK_32BIT_ADMA_SIZE;
 
         /* enable 1/8V DDR capable */
         host->mmc->caps |= MMC_CAP_1_8V_DDR;
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 460ffaf0f6d7..2bd7bf4fece7 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 
 #include <linux/mmc/host.h>
 
@@ -502,6 +503,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
         /* This host supports the Auto CMD12 */
         host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
 
+        /* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
+        host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
+
         if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
             pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
                 host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index c31a3343340d..0e02cc1df12e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -628,12 +628,11 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
         /* timeout in us */
         if (!data)
                 target_timeout = cmd->cmd_timeout_ms * 1000;
-        else
-                target_timeout = data->timeout_ns / 1000 +
-                        data->timeout_clks / host->clock;
-
-        if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
-                host->timeout_clk = host->clock / 1000;
+        else {
+                target_timeout = data->timeout_ns / 1000;
+                if (host->clock)
+                        target_timeout += data->timeout_clks / host->clock;
+        }
 
         /*
          * Figure out needed cycles.
@@ -645,7 +644,6 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
          *     =>
          *     (1) / (2) > 2^6
          */
-        BUG_ON(!host->timeout_clk);
         count = 0;
         current_timeout = (1 << 13) * 1000 / host->timeout_clk;
         while (current_timeout < target_timeout) {
@@ -1867,9 +1865,6 @@ static void sdhci_tasklet_finish(unsigned long param)
 
         del_timer(&host->timer);
 
-        if (host->version >= SDHCI_SPEC_300)
-                del_timer(&host->tuning_timer);
-
         mrq = host->mrq;
 
         /*
@@ -2461,22 +2456,6 @@ int sdhci_add_host(struct sdhci_host *host)
                 host->max_clk = host->ops->get_max_clock(host);
         }
 
-        host->timeout_clk =
-                (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
-        if (host->timeout_clk == 0) {
-                if (host->ops->get_timeout_clock) {
-                        host->timeout_clk = host->ops->get_timeout_clock(host);
-                } else if (!(host->quirks &
-                                SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
-                        printk(KERN_ERR
-                               "%s: Hardware doesn't specify timeout clock "
-                               "frequency.\n", mmc_hostname(mmc));
-                        return -ENODEV;
-                }
-        }
-        if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
-                host->timeout_clk *= 1000;
-
         /*
          * In case of Host Controller v3.00, find out whether clock
          * multiplier is supported.
@@ -2509,10 +2488,26 @@ int sdhci_add_host(struct sdhci_host *host)
         } else
                 mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
 
+        host->timeout_clk =
+                (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
+        if (host->timeout_clk == 0) {
+                if (host->ops->get_timeout_clock) {
+                        host->timeout_clk = host->ops->get_timeout_clock(host);
+                } else if (!(host->quirks &
+                                SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
+                        printk(KERN_ERR
+                               "%s: Hardware doesn't specify timeout clock "
+                               "frequency.\n", mmc_hostname(mmc));
+                        return -ENODEV;
+                }
+        }
+        if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
+                host->timeout_clk *= 1000;
+
         if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
-                mmc->max_discard_to = (1 << 27) / (mmc->f_max / 1000);
-        else
-                mmc->max_discard_to = (1 << 27) / host->timeout_clk;
+                host->timeout_clk = mmc->f_max / 1000;
+
+        mmc->max_discard_to = (1 << 27) / host->timeout_clk;
 
         mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
 
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 8d185de90d20..44a9668c4b7a 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -27,7 +27,6 @@
 static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state)
 {
         const struct mfd_cell *cell = mfd_get_cell(dev);
-        struct mmc_host *mmc = platform_get_drvdata(dev);
         int ret;
 
         ret = tmio_mmc_host_suspend(&dev->dev);
@@ -42,7 +41,6 @@ static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state)
 static int tmio_mmc_resume(struct platform_device *dev)
 {
         const struct mfd_cell *cell = mfd_get_cell(dev);
-        struct mmc_host *mmc = platform_get_drvdata(dev);
         int ret = 0;
 
         /* Tell the MFD core we are ready to be enabled */