3 files changed, 19 insertions, 19 deletions

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index f0fcce40cd8d..50ff19a62368 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1216,12 +1216,7 @@ static void mmci_dt_populate_generic_pdata(struct device_node *np,
         int bus_width = 0;
 
         pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
-        if (!pdata->gpio_wp)
-                pdata->gpio_wp = -1;
-
         pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0);
-        if (!pdata->gpio_cd)
-                pdata->gpio_cd = -1;
 
         if (of_get_property(np, "cd-inverted", NULL))
                 pdata->cd_invert = true;
@@ -1276,6 +1271,12 @@ static int __devinit mmci_probe(struct amba_device *dev,
                 return -EINVAL;
         }
 
+        if (!plat) {
+                plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL);
+                if (!plat)
+                        return -ENOMEM;
+        }
+
         if (np)
                 mmci_dt_populate_generic_pdata(np, plat);
 
@@ -1424,6 +1425,10 @@ static int __devinit mmci_probe(struct amba_device *dev,
         writel(0, host->base + MMCIMASK1);
         writel(0xfff, host->base + MMCICLEAR);
 
+        if (plat->gpio_cd == -EPROBE_DEFER) {
+                ret = -EPROBE_DEFER;
+                goto err_gpio_cd;
+        }
         if (gpio_is_valid(plat->gpio_cd)) {
                 ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
                 if (ret == 0)
@@ -1447,6 +1452,10 @@ static int __devinit mmci_probe(struct amba_device *dev,
                 if (ret >= 0)
                         host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
         }
+        if (plat->gpio_wp == -EPROBE_DEFER) {
+                ret = -EPROBE_DEFER;
+                goto err_gpio_wp;
+        }
         if (gpio_is_valid(plat->gpio_wp)) {
                 ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
                 if (ret == 0)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 9a7a60aeb19e..389a3eedfc24 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -85,7 +85,6 @@
 #define BRR_ENABLE              (1 << 5)
 #define DTO_ENABLE              (1 << 20)
 #define INIT_STREAM             (1 << 1)
-#define ACEN_ACMD12             (1 << 2)
 #define DP_SELECT               (1 << 21)
 #define DDIR                    (1 << 4)
 #define DMA_EN                  0x1
@@ -117,7 +116,6 @@
 #define OMAP_MMC_MAX_CLOCK      52000000
 #define DRIVER_NAME             "omap_hsmmc"
 
-#define AUTO_CMD12              (1 << 0)        /* Auto CMD12 support */
 /*
  * One controller can have multiple slots, like on some omap boards using
  * omap.c controller driver. Luckily this is not currently done on any known
@@ -177,7 +175,6 @@ struct omap_hsmmc_host {
         int                     reqs_blocked;
         int                     use_reg;
         int                     req_in_progress;
-        unsigned int            flags;
         struct omap_hsmmc_next  next_data;
 
         struct  omap_mmc_platform_data  *pdata;
@@ -773,8 +770,6 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd,
                 cmdtype = 0x3;
 
         cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
-        if ((host->flags & AUTO_CMD12) && mmc_op_multi(cmd->opcode))
-                cmdreg |= ACEN_ACMD12;
 
         if (data) {
                 cmdreg |= DP_SELECT | MSBS | BCE;
@@ -847,14 +842,11 @@ omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data)
         else
                 data->bytes_xfered = 0;
 
-        if (data->stop && ((!(host->flags & AUTO_CMD12)) || data->error)) {
-                omap_hsmmc_start_command(host, data->stop, NULL);
-        } else {
-                if (data->stop)
-                        data->stop->resp[0] = OMAP_HSMMC_READ(host->base,
-                                                        RSP76);
+        if (!data->stop) {
                 omap_hsmmc_request_done(host, data->mrq);
+                return;
         }
+        omap_hsmmc_start_command(host, data->stop, NULL);
 }
 
 /*
@@ -1859,7 +1851,6 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
         host->mapbase   = res->start + pdata->reg_offset;
         host->base      = ioremap(host->mapbase, SZ_4K);
         host->power_mode = MMC_POWER_OFF;
-        host->flags     = AUTO_CMD12;
         host->next_data.cookie = 1;
 
         platform_set_drvdata(pdev, host);
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 1fe32dfa7cd4..423da8194cd8 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -4,7 +4,7 @@
  * Support of SDHCI platform devices for spear soc family
  *
  * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * Inspired by sdhci-pltfm.c
  *
@@ -289,5 +289,5 @@ static struct platform_driver sdhci_driver = {
 module_platform_driver(sdhci_driver);
 
 MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
 MODULE_LICENSE("GPL v2");